Samsung | LW22A13W | Samsung LW22A13W Benutzerhandbuch

EN1-PD22EO
7/12/03 11:26 PM
Page 1
LCD TV 22
LW22A13W
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
TELETEXT
PICTURE IN PICTURE
EN1-PD22EO
7/12/03 11:26 PM
Page 2
Information in this document is subject to change without notice.
© 2003 Samsung Electronics Co., Ltd. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly
forbidden.
Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential
damages in connection with the furnishing, performance, or use of this material.
The Samsung logo is the registered trademarks of Samsung Electronics Co., Ltd.; VESA, DPMS and DDC are
registered trademarks of Video Electronics Standard Association; the ENERGY STAR name and logo are registered
trademarks of the U.S. Environmental Protection Agency (EPA). As an ENERGY STAR Partner, Samsung Electronics Co.,
Ltd. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. All other product names
mentioned herein may be the trademarks or registered trademarks of their respective owners.
English-2
EN1-PD22EO
7/12/03 11:26 PM
Page 3
Safety Instructions
These illustrations represent precautions concerning your TV.
Do NOT expose the TV to extreme
temperature conditions (below 5°C
and above 35°C) or to extreme
humidity conditions (less than 10%
and more than 75%).
Do NOT expose the TV to direct
sunlight.
If the TV is broken, do not try to During a storm conditions
repair it yourself. Contact
(especially when there is
qualified service personnel.
lightning) unplug the TV from
the mains socket and aerial.
Do NOT expose the TV to any
liquids.
If the remote control is not
used for a long period of time,
remove the batteries and store
it in a cool, dry place.
Remove and discard vinyl bag
from power adaptor before
use. Possible fire hazard.
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS
Caution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
CAUTION: TO PREVENT ELECTRICAL SHOCK,
DO NOT REMOVE REAR COVER, NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
☛
The lightning flash and arrow head
within the triangle is a warning sign
alerting you of “dangerous voltage”
inside the product.
The exclamation point within the
triangle is a warning sign alerting
you of important instructions
accompanying the product.
!
WARNING: TO PREVENT DAMAGE
The main voltage is indicated on the rear of
the TV set and the frequency is 50 or 60Hz.
WHICH MAY RESULT IN FIRE OR SHOCK
HAZARD. DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
Mode
System
CW/WS
PAL-B/G, D/K, I, SECAM-B/G,D/K, I, L/L’, NTSC4.43
CS
PAL-B/G, D/K, I, SECAM-B/G,D/K, I, NTSC4.43/3.58
English-3
EN1-PD22EO
7/12/03 11:26 PM
Page 4
Thank you for buying a SAMSUNG TV.
Please take the time to read these
instructions, as they will help you to
operate your TV with ease.
Contents
◆ FOREWORD
■
■
Safety Instructions ..................................................................................................3
Caution ...................................................................................................................3
◆ CONNECTING AND PREPARING YOUR TELEVISION
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Control Panels ........................................................................................................6
Connection Panel ...................................................................................................7
Infrared Remote Control .........................................................................................8
Connecting to an Aerial or Cable Television Network ............................................9
Connecting a non-AV-Link VCR .............................................................................9
Connecting a Satellite Receiver............................................................................10
Connecting a Decoder ..........................................................................................10
Connecting to a Sub-woofer .................................................................................11
Inserting the Batteries in the Remote Control .......................................................11
Switching Your Television On and Off ..................................................................12
Placing Your Television in Standby Mode ............................................................12
Becoming Familiar with the Remote Control ........................................................13
Plug and Play Feature ..........................................................................................14
Choosing Your Language .....................................................................................15
◆ SETTING THE CHANNELS
■
■
■
■
■
■
■
■
■
■
Automatic Storing of Channels .............................................................................16
Sorting the Stored Channels.................................................................................17
Manual Storing of Channels .................................................................................18
Assigning Names to Channels..............................................................................20
Skipping Unwanted Channels...............................................................................21
Fine Tuning Channels...........................................................................................22
Changing the Picture Standard.............................................................................23
Adjusting the Picture Settings ...............................................................................23
Selecting the Picture Format ................................................................................24
Freezing the Picture..............................................................................................24
◆ SETTING THE SOUND
■
■
■
■
■
■
■
■
■
■
■
Adjusting the Volume ............................................................................................25
Switching the Sound Off Temporarily ...................................................................25
Selecting the Sound Standard ..............................................................................26
Adjusting the Sound Settings................................................................................26
Selecting the Sound Mode....................................................................................27
Selecting the Melody Sound .................................................................................27
Virtual Dolby .........................................................................................................28
Adjusting the Volume Automatically .....................................................................28
Connecting the Headphones ................................................................................29
Adjusting Your Headphone Preferences ..............................................................29
Selecting the Sound..............................................................................................30
English-4
EN1-PD22EO
7/12/03 11:26 PM
Page 5
Contents
◆ SETTING THE PICTURE
■
■
Picture In Picture Feature .....................................................................................30
Selecting the Blue Screen Mode ..........................................................................32
◆ SETTING THE TIME
■
■
■
Setting the Sleep Timer ........................................................................................32
Setting and Displaying the Current Time ..............................................................33
Switching the Television On and Off Automatically ..............................................34
◆ SETTING THE PC
■
■
■
■
■
Connecting to the PC Input...................................................................................35
Adjusting the Screen Quality ................................................................................36
Changing the Screen Position ..............................................................................36
Changing the Screen Colour Standard .................................................................37
Adjusting the Screen Colour Settings ...................................................................37
◆ USING THE TELETEXT FEATURE
■
■
■
■
■
Teletext Decoder ..................................................................................................38
Displaying the Teletext Information ......................................................................38
Selecting a Specific Teletext Page .......................................................................39
Using FLOF to Select a Teletext Page .................................................................40
Storing Teletext Pages .........................................................................................40
◆ INFORMATION ON CONNECTIONS AND RECOMMENDATIONS FOR USE
■
■
■
■
■
■
■
■
■
■
■
■
Connecting to the AV1 or 2 SCART Input/Outputs...............................................41
Connecting to the RCA Input (AV3) ......................................................................41
Connecting to the S-Video Input ..........................................................................42
Viewing Pictures From External Sources .............................................................42
Wiring the Mains Power Supply Plug (UK Only) ...................................................43
Troubleshooting: Before Contacting Service Personnel .......................................44
Display Modes ......................................................................................................46
Attaching a wall or Arm mounting Device .............................................................47
Installing VESA Compliant mounting Device ........................................................48
Kensington Slot.....................................................................................................49
Specifications........................................................................................................50
Pin Assignments ...................................................................................................51
Symbols
Press
Push
Hold down
☛
➢
Important
Note
English-5
EN1-PD22EO
7/12/03 11:26 PM
Page 6
Control Panels
❶ POWER SWITCH
❺ MENU SELECTION
❷ POWER INDICATOR
❻ CHANNEL SELECTION
❸ REMOTE CONTROL SENSOR
❼ VOLUME ADJUSTMENT
❹ TV/VIDEO
➣
Using the Buttons on the Panel
If the remote control no longer works or you have lost it, you can use controls on the panel of
the TV to:
◆ Switch on the TV when it is in Standby mode and select channels ( ▼ C/P.
◆ Access the local menu ( MENU )
◆ Adjust the volume (-
+)
◆ Switch among Video input modes ( TV/VIDEO )
English-6
▲)
EN1-PD22EO
7/12/03 11:26 PM
Page 7
Connection Panels
Rear of TV
POWER INPUT CONNECTOR
RCA AUDIO/VIDEO INPUT CONNECTORS
S-VIDEO INPUT CONNECTOR
WOOFER OUTPUTS
ANTENNA INPUT CONNECTOR
SCART 2 (VIDEO/AUDIO INPUT/OUTPUT) CONNECTOR
SCART 1 (VIDEO/AUDIO INPUT/OUTPUT, RGB INPUT) CONNECTOR
PC AUDIO INPUT CONNECTOR
HEADPHONE CONNECTOR
PC VIDEO INPUT CONNECTOR
KENSINGTON LOCK (SEE PAGE 49)
English-7
EN1-PD22EO
7/12/03 11:26 PM
Page 8
Infrared Remote Control
You can use the remote control up to a distance of about 23 feet from the TV.
When using the remote, always point it directly at the TV.
TELEVISION STANDBY BUTTON
MODE :
SELECTS A TARGET DEVICE
TO CONTROLLED BY THE
SAMSUNG REMOTE CONTROL
(TV, VCR, CABLE BOX, OR DVD).
NUMERIC BUTTONS
ONE/TWO-DIGIT CHANNEL SELECTION
SELECT TO THE PC MODE DIRECTLY
SOUND STANDARD SELECTION
VOLUME INCREASE
TEMPORARY SOUND SWITCH OFF
VOLUME DECREASE
ON-SCREEN DISPLAY/
TELETEXT INDEX
MENU ADJUSTMENT AND
VIDEO OR DVD ADJUSTMENT
BUTTON.
moves or adjusts Menu. Adjusts
the functions of Video or DVD.
PREVIOUS CHANNEL
VIRTUAL DOLBY SELECTION
PICTURE STANDARD SELECTION
NEXT CHANNEL/
TELETEXT NEXT PAGE
TV INFORMATION DISPLAY
PREVIOUS CHANNEL/
TELETEXT PREVIOUS PAGE
EXTERNAL INPUT SELECTION
MENU EXIT
TELETEXT DISPLAY/MIX
SOUND MODE SELECTION
AUTOMATIC SWITCH-OFF
PICTURE SIZE SELECTION
➢
TELETEXT LIST/FLOF MODE SELECTION
STILL THE MAIN PICTURE/
TELETEXT CANCEL
PIP FUNCTIONS;
PIP ON/CHANNEL SELECTION /
SIZE SETTING/SWAP/LOCATE/
INPUT SOURCE SELECTION(SOURCE)/
)
TELETEXT SUB-PAGE(
It is possible that the work of the transmitter is dull or not operated normally if the light of the Bulb is
on around the TV set.
English-8
EN1-PD22EO
7/12/03 11:26 PM
Page 9
Connecting to an Aerial or Cable Television Network
To view TV channels correctly, a signal must be received by the set
from one of the following sources:
◆ An outdoor aerial
◆ A cable TV network
◆ A satellite network (see page 10 for further details)
1
In the first three cases, connect the aerial or network input cable to
the 75Ω coaxial socket on the rear of the TV.
2
If you are using an indoor aerial, you may need to turn it when
tuning your TV until you obtain a picture that is both sharp and
clear.
For further details, refer to:
◆ “Automatic Storing of Channels” on page 16
◆ “Manual Storing of Channels” on page 18
Rear of the TV
➢
TV Antenna
or
Cable Television
Network
If you wish to subscribe to a cable network, contact your
local dealer.
Connecting a non-AV-Link VCR
You can connect a VCR to the TV using a:
◆ Coaxial cable
◆ SCART cable
Rear of the TV
◆ S-Video cable
1
Plug the aerial input cable into the appropriate socket on the VCR.
2
Connect a coaxial cable to the:
◆ VCR aerial output socket
◆ Television aerial input socket
3
Aerial output
SCART
cable
To obtain better picture quality and, in addition, simplify the setting
up procedure of the VCR, you can connect a SCART cable
between:
◆ The AV (SCART) socket on the VCR
and
◆ A SCART socket on the rear of the TV
OUT TO TV
DECODER
L
G
AV
M
IN FROM
ANT.
ATT.
A
M
TEST
A
COUL
4
Follow the instructions supplied with your VCR to tune the VCR to
your TV.
N/B
Aerial input
English-9
EN1-PD22EO
7/12/03 11:26 PM
Page 10
Connecting a Satellite Receiver
In order to watch TV programmes broadcast via a satellite network,
you must connect a satellite receiver to the TV set.
Rear of the TV
or
➢
If you wish to connect both a satellite receiver and a
VCR, you should connect the:
◆ Receiver to the VCR
◆ VCR to the TV
(see pages 41~42 for further details)
Otherwise, connect the receiver directly to the TV.
Using a SCART cable
Connect the receiver SCART cable to one of the SCART connectors
on the rear of the TV.
Satellite Receiver
Using a coaxial cable
Connect a coaxial cable to the:
◆ Receiver output socket.
◆ Television aerial input socket.
Connecting a Decoder
In order to descramble a coded transmission signal, you must
connect a decoder to the TV set.
Rear of the TV
or
➢
If you wish to connect both a decoder and a VCR, you
should connect the:
◆ Decoder to the VCR
◆ VCR to the TV
(see pages 42~42 for further details)
Otherwise, connect the decoder directly to the TV.
Using a SCART cable
Connect the receiver SCART cable to one of the SCART connectors
on the rear of the TV.
Decoder
Using a coaxial cable
Connect a coaxial cable to the:
◆ Receiver output socket.
◆ Television aerial input socket.
English-10
EN1-PD22EO
7/12/03 11:26 PM
Page 11
Connecting to a Sub-woofer
Connect an audio cable between the INPUT jack on an
active(powered) Sub woofer and the WOOFER OUT jack on the TV.
Sub-Woofer
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
◆ Purchase the TV
◆ Find that the remote control is no longer operating
correctly
1
Remove the cover on the rear of the remote control by pressing
the symbol downwards and then pulling firmly to remove it.
2
Insert two R03, UM4, “AA” 1.5V or equivalent batteries taking care
to respect the polarities:
◆ + on the battery against + on the remote control
◆ - on the battery against - on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
➢
Do not mix battery types, i.e. alkaline and monganese.
English-11
EN1-PD22EO
7/12/03 11:26 PM
Page 12
Switching Your TV On and Off
The mains lead is attached to the rear of your TV.
☛
If you have purchased this TV in the United Kingdom,
refer to page 43 for further instructions on plug wiring.
1
Plug the mains lead into an appropriate socket.
A green Standby indicator appears on the front of your
Result:
television.
2
Press the POWER button ( ).
The screen is turned on and a green Standby indicator
Result:
disappears on the front of your television.
(When the timer operates and the power is turned off,
LED turns red.)
3
To switch your television off, press the POWER button (
again.
)
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce
the power consumption.
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1
Press the POWER button ( ).
Result:
The screen is turned off and a green Standby indicator
appears on the front of your television.
2
To switch your television back on, simply press the POWER button
( ) again.
➢
English-12
Do not leave your TV in Standby mode for long periods
of time (when you are away on holiday, for example).
Turn your television off by pressing the POWER button
( ). It is best to unplug your television from the mains
and aerial.
EN1-PD22EO
7/12/03 11:26 PM
Page 13
Becoming Familiar with the Remote Control
The remote control is used mainly to:
◆ Change channels and adjust the volume
◆ Set up the TV using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button
Viewing Function
P
Used to display the next
stored channel.
P
Used to display the
previous stored channel.
➢
Menu Function
For double digit channels, the second digit must be
pushed immediately after the first. Failure to do this
will result in a single digit channel being displayed.
Used to reduce the
volume.
Used to increase the
volume.
Used to:
◆ Display a submenu
containing selections for
the current menu option
◆ Search forwards/backwards
manually for channels
◆ Increase/reduce a menu
option value
MENU
to
Used to display the
on-screen menu system.
Used to return to the previous
menu or normal viewing.
Used to display the
corresponding channels.
Used to display the
corresponding channel directly.
English-13
EN1-PD22EO
7/12/03 11:26 PM
Page 14
Plug and Play Feature
When the TV is initially powered ON, two basic customer settings
proceed automatically and subsequently. The follwing settings are
available.
1
If the TV is in Standby mode, press the POWER button (
remote control.
Result:
2
Plug & Play
3
The Time menu is displayed with Clock is selected.
(Refer to “Automatic Storing of Channels” on page 16)
5
Press the the LEFT/RIGHT
to move to the hour or minute.
Set the hour minute by pressing the UP/DOWN ▲▼ button.
(Refer to “Setting and Displaying the Current Time ” on page 33)
6
When you have finished, press the MENU button.
Result:
English-14
The Auto store menu is displayed with Area is
selected.
Select your area by pressing the LEFT/RIGHT
button.
To search the channels, select Search by pressing the UP/DOWN
button, and then press the LEFT/RIGHT
button.
Press the MENU button to stop the search.
Result:
Enjoy Your Watching.
The message Ant. Input Check is displayed.
Make sure that the antenna is connected to the TV.
Press the the LEFT/RIGHT
button.
Result:
4
The message Plug & Play is displayed. It flickers for
a little while, and then the Language menu is
automatically displayed.
Select the appropriate language by pressing the
UP/DOWN ▲▼ button.
Press the MENU button to enter the language.
Result:
Ant. Input Check
) on the
The message Enjoy Your Watching is displayed, and
then the channel which has been stored will be activated.
EN1-PD22EO
7/12/03 11:26 PM
Page 15
Plug and Play Feature
If you want to reset this feature...
1
Press the MENU button.
Result:
2
The main menu is displayed.
Press the UP/DOWN ▲▼ button to select the Function.
Press the LEFT/RIGHT
button.
Result:
The options available in the Function group are
displayed.
3
Press the UP/DOWN ▲▼ button to select the Plug & Play.
4
Press the LEFT/RIGHT
Result:
5
button.
The message Plug & Play is displayed.
For further details on how to set, refer to the opposite page14.
Choosing Your Language
When you start using your TV for the first time, you must select the
language which will be used for displaying menus and indications.
1
Press the MENU button.
Result:
2
Press the UP/DOWN ▲▼ button to select the Function.
Press the LEFT/RIGHT
button.
Result:
3
The main menu is displayed.
The options available in the Function group are
displayed. The Language is selected.
Press the LEFT/RIGHT
Result:
button again.
The languages available are listed.
4
Press the UP/DOWN ▲▼ button to select appropriate language.
5
When you are satisfied with your choice, press the MENU button to
return to normal viewing.
English-15
EN2-PD22EO
7/12/03 11:26 PM
Page 16
Automatic Storing of Channels
You can scan for the frequency ranges available to you, (availability
depends on your country). Automatically allocated programme
numbers may not correspond to actual or desired programme
numbers. However you can sort numbers manually and clear any
channels you do not wish to watch (see pages 17~19 for further
details).
1
Press the MENU button.
Result:
2
Press the UP/DOWN ▲▼ button to select the Channel.
Press the LEFT/RIGHT
button.
Result:
3
The options available in the Channel group are
displayed.
Press the UP/DOWN ▲▼ button to select the Auto store.
Press the LEFT/RIGHT
button.
Result:
The options available in the Auto store group are
displayed.
4
Press the UP/DOWN ▲▼ button to select the Country.
5
Press the LEFT/RIGHT
to select your country.
If you have selected the Others option but do not wish to scan the
PAL frequency range, store the channels manually (see page 18).
6
Press the UP/DOWN ▲▼ button to select the Search.
Press the LEFT/RIGHT
button.
Press the UP/DOWN ▲▼ button.
Result:
➢
7
English-16
The main menu is displayed.
The search will end automatically. Channels are
sorted and stored in an order which reflacts their
position in the frequency range, (with lowest first and
highest last). The programme originally selected
is then displayed.
To stop the search before it has finished, press the MENU
button and UP/DOWN ▲▼.
When the channels have been stored, you can:
◆ Sort them in the order required (see page 17)
◆ Fine-tune channel reception if necessary (see page 22)
◆ Assign a name to the stored channels (see page 20)
EN2-PD22EO
7/12/03 11:26 PM
Page 17
Sorting the Stored Channels
The Sort operation allows you to change the programme numbers
of stored channels. This operation may be necessary after using
ATM. You can delete those channels you do not want to keep.
1
Press the MENU button.
Result:
2
Press the UP/DOWN ▲▼ button to select the Channel.
Press the LEFT/RIGHT
button.
Result:
3
The main menu is displayed.
The options available in the Channel group are
displayed.
Press the UP/DOWN ▲▼ button to select the Sort.
Press the LEFT/RIGHT
button.
Result:
The Sort menu is displayed.
4
Press the UP/DOWN ▲▼ to select the From.
5
Press the LEFT/RIGHT
6
Press the UP/DOWN ▲▼ button to select the To.
7
Press the LEFT/RIGHT
to select the number of the
programme to which the channel os to be moved.
8
Press the UP/DOWN ▲▼ button to select the Store.
9
Press the LEFT/RIGHT
Result:
10
to select the channel that you wish.
button to select the OK.
The channel is moved to its new position.
Repeat Steps 4 to 9 until you have moved all the channels to the
required programme numbers.
English-17
EN2-PD22EO
7/12/03 11:26 PM
Page 18
Manual Storing of Channels
You can store up to 100 TV channels, including those received via
cable networks.
When storing channels manually, you can choose:
◆ Whether or not to store each of the channels found
◆ The programme number by which you wish to identify
each stored channel
1
Press the MENU button.
Result:
2
The main menu is displayed.
Press the UP/DOWN ▲▼ button to select the Channel.
Press the LEFT/RIGHT
button.
Result:
The options available in the Channel group are
displayed.
3
Press the UP/DOWN ▲▼ button to select the Manual store.
Press the LEFT/RIGHT
button.
Result:
4
The Manual store menu is displayed.
If necessary, indicate the broadcasting standard required by
Pressing the UP/DOWN ▲▼ to select the Color system, followed
by Press the LEFT/RIGHT
button. The color standards are
displayed in the following order :
➞ Auto ➞ PAL ➞ SECAM ➞ NT4.43
5
Select the Sound system by pressing the UP/DOWN ▲▼ button,
and followed by pressing the LEFT/RIGHT
.
The sound standards are displayed in the following order. :
➞ BG ➞ DK ➞ I ➞ L
English-18
6
Press the UP/DOWN ▲▼ button to select the Store.
7
Press the LEFT/RIGHT
button to select the OK.
EN2-PD22EO
7/12/03 11:26 PM
Page 19
Manual Storing of Channels
8
If you...
Then press the ...
Know the number of the
the channel to be stored
◆ UP/DOWN ▲▼ button to
select Channel
◆ LEFT/RIGHT
to indicate
the required number
Do not know the channel
the numbers
◆ UP/DOWN ▲▼ button to
select Search
◆ LEFT/RIGHT
to start the
search
Result:
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
your screen.
9
To assign a programme number to a channel, select the Prog.No.
Press the LEFT/RIGHT
button until you find the correct
number.
10
Press the UP/DOWN ▲▼ button to select the Store.
11
Press the LEFT/RIGHT
12
To store the channel and associated programme number, press
the MENU button.
13
Repeat Steps 8 to 12 for each channel to be stored.
button to select the OK.
English-19
EN2-PD22EO
7/12/03 11:26 PM
Page 20
Assigning Names to Channels
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed, allowing
you to assign new names.
1
Press the MENU button.
Result:
2
Press the UP/DOWN ▲▼ button to select the Channel.
Press the LEFT/RIGHT
button.
Result:
3
The options available in the Channel group are
displayed.
Press the UP/DOWN ▲▼ button to select the Name.
Press the LEFT/RIGHT
button.
Result:
The Name menu is displayed with the current channel
automatically selected.
4
If necessary, select the channel to be assigned a new name by
Pressing the UP/DOWN ▲▼ button.
5
Press the LEFT/RIGHT
Result:
6
button.
Arrow indications are displayed around the name box.
To...
Then press the...
Select a letter, number or symbol
UP/DOWN ▲▼ button
Move on the next letter
RIGHT
Move back the previous letter
LEFT
➢
English-20
The main menu is displayed.
button
button
The characters available are:
◆ Letters of the alphabet (A ... Z)
◆ Numbers (0 ... 9)
◆ Special characters (_, –, space)
7
You can have each channel newlynamed.
8
When you have finished entering the name, press the MENU
button to confirm the name.
EN2-PD22EO
7/12/03 11:26 PM
Page 21
Skipping Unwanted Channels
You can exclude the channels of your choice from the channel scan
operation. When you scan through the stored channels, those you
have chosen to skip are not displayed.
All channels that you do not specifically choose to skip are
displayed during scanning.
1
Press the MENU button.
The main menu is displayed.
Result:
2
Press the UP/DOWN ▲▼ button to select the Channel.
Press the LEFT/RIGHT
button.
Result:
3
The options available in the Channel group are
displayed. The Channel menu is displayed.
Press the UP/DOWN ▲▼ button to select the Add/Erase.
Press the LEFT/RIGHT
button.
Result:
The Add/Erase menu is displayed.
4
Press the UP/DOWN ▲▼ button to select the required channel.
5
To add or erase the desired channel by pressing the
LEFT/RIGHT
button.
6
When you have finished adding and erasing channels,
press the MENU button repeatedly to return to normal
viewing.
English-21
EN2-PD22EO
7/12/03 11:26 PM
Page 22
Fine Tuning Channels
Use fine tuning to manually adjust a particular channel for optimal
reception.
1
Press the MENU button
Result:
2
Press the UP/DOWN ▲▼ button to select the Channel.
Press the LEFT/RIGHT
button.
Result:
English-22
The main menu is displayed.
The options avaliable in the Channel group are
displayed.
3
Press the UP/DOWN ▲▼ button to select the Fine Tune.
Press the LEFT/RIGHT
.
4
Press the LEFT/RIGHT
5
Press the UP/DOWN ▲▼ button to select the Store.
6
Press the LEFT/RIGHT
7
To reset the fine tuning.
Press the UP/DOWN ▲▼ button to select the Erase, then press
the LEFT/RIGHT
to select the OK.
button to adjust the fine tuning.
button to select the OK.
EN2-PD22EO
7/12/03 11:26 PM
Page 23
Changing the Picture Standard
You can use your remote control to select the type of picture which
best corresponds to your viewing requirements. The following
picture effects are available:
◆ Custom, Dynamic, Standard, Movie.
To select the required picture effect, simply press the P.STD(
on the remote control.
☛
) button
You can also set these options via the Adjust option in the
Picture group. If you change the Contrast, Brightness,
Sharpness, Colour, Tint (NTSC only) or Colour tone
settings on the Picture menu, the Custom option is selected
automatically.
Adjusting the Picture Settings
Your TV has several settings which allow you to control picture quality:
◆ Contrast, Brightness, Sharpness, Colour,
Tint (NTSC only), Colour tone
1
Press the MENU button.
Result:
The options available in the Picture group are
displayed.
2
Press the LEFT/RIGHT
3
Press the UP/DOWN ▲▼ button to select the required item you want
change.
➣
4
button.
When select the Mode to Custom, the Adjust menu is
displayed.
To adjust the...
Press the...
◆ Contrast
◆ Brightness
◆
LEFT/RIGHT
button.
Result: The horizontal bar is displayed.
◆ Sharpness
◆ Colour
◆ Tint (NTSC only)
◆ Colour tone
◆
LEFT/RIGHT
button.
Result: You select the required option
(Cool2, Cool1, Normal,
Warm1,Warm2).
5
When you are satisfied with the settings,press the MENU button
repeatedly to return to normal viewing.
English-23
EN3-PD22EO
7/12/03 11:27 PM
Page 24
Selecting the Picture Format
You can select the picture format which best corresponds to your
viewing requirements by simply pressing the P.SIZE button.
The following picture formats are available in the order given:
Auto wide ➞ Wide ➞ Panorama ➞ Zoom1 ➞ Zoom2 ➞ 4:3
Picture format
Description
Autowide
The screen size is automatically adjusted when
entering a PAL Plus signal(WSS).
Wide
Setting for the 16:9 screen format
Panorama
Use this mode for the wide aspect ratio of a
Panorama picture
Zoom (1,2)
Expansion of a 16:9 picture to full screen format.
4:3
Setting for normal 4:3 format.
Freezing the Picture
Press the STILL button to freeze a moving picture into a still one.
Press the button again to cancel.
English-24
EN3-PD22EO
7/12/03 11:27 PM
Page 25
Adjusting the Volume
You can adjust the volume using your remote control.
To...
hold down the...
Increase the volume
button.
Result: A horizontal bar is displayed and the
volume increases until you release the
button. The cursor moves to the right
to indicate the volume.
Decrease the volume
button.
Result: A horizontal bar is displayed and the
volume decreases until you release
the button. The cursor moves to the
left to indicate the volume.
➢
Additional sound adjustments are available on your TV.
For further details, refer to pages 25 to 30.
Switching the Sound Off Temporarily
You can switch the sound off temporarily.
Example: You wish to answer the telephone.
1
Press the MUTE(
Result:
2
) button.
The sound is switched off and “Mute” is displayed.
When you wish to turn the sound back on, press the MUTE
( )button again or either of the volume buttons.
Result:
The sound comes back on at the same volume as
before and the “Mute” indication disappears.
English-25
EN3-PD22EO
7/12/03 11:27 PM
Page 26
Selecting the Sound Standard
You can use your remote control to select the type of special sound
effect to be used when watching a given broadcast. The following
sound effects are available:
◆ Custom, Standard, Music, Movie, Speech.
To select the required sound effect, simply press the S.STD(
on the remote control.
☛
)button
You can also set these options via the Equalizer in the
Sound group.
Adjusting the Sound Settings
The following settings can be adjusted to suit your personal
preferences. The following settings are available:
1
Press the MENU button.
Result:
2
Press the UP/DOWN ▲▼ button to select the Sound.
Press the LEFT/RIGHT
button.
Result:
The options available in the Sound group are displayed.
3
Press the UP/DOWN ▲▼ button to select the Equalizer.
When select the mode to Custom, the Equalizer menu is
displayed.
4
Press the LEFT/RIGHT
Result:
5
button.
The Equalizer menu is displayed.
To...
Press the...
Change a setting
UP/DOWN ▲▼ button
Move to the next setting
RIGHT
Move to the previous setting
LEFT
button
button
When you are satisfied with the settings,press the MENU button
repeatedly to return to normal viewing.
☛
English-26
The main menu is displayed.
If you make any changes to the Equalizer settings,
the sound standard is automatically switched to Custom.
EN3-PD22EO
7/12/03 11:27 PM
Page 27
Selecting the Sound Mode
You can set the Audio mode by using DUAL I/II. When you press
this button, current sound mode is displayed on the upper right
corner of the screen.
DUAL I/II
Audio Type
Stereo
Stereo ↔ Mono
Dual
Dual1 ↔ Dual2
Mono
Mono
Stereo
NICAM
Dual
➣
Automatic
Change
Dual1
Automatic
Change
Mono ↔ Stereo
Mono → Dual1 → Dual2
→
FM
Stereo
Mono
→
Mono
Default
Dual1
◆ If the receiving conditions deteriorate, listening will be easier if
the mode is set to the “Mono” position using the DUAL I/II
button.
◆ If the stereo signal is weak (or if intermittent Stereo-Mono) and
automatic switching occurs, then switch to the “Mono” mode.
◆ When receiving mono sound in the AV mode, connect to the
“L” input jack on the panels. If the mono sound comes out only
from the left speaker, then press the DUAL I/II button.
Selecting the Melody Sound
You can hear clear melody sound when the TV is powered ON
or OFF. (No melody when the sound is set mute and power is
turned off)
1
Press the MENU button.
Result:
2
The main menu is displayed.
Press the UP/DOWN ▲▼ button to select Sound.
Press the LEFT/RIGHT
button.
Result:
The options available in the Sound group are displayed.
3
Press the UP/DOWN ▲▼ button to select the Melody.
4
Select the required option by pressing the LEFT/RIGHT
button.
5
Press the MENU button to return to normal viewing.
English-27
EN3-PD22EO
7/12/03 11:27 PM
Page 28
Virtual Dolby
This feature allows the TV’s L/R speakers to provide a home
Theater-like Dolby effect. The center and surround sounds are
mixed into the L/R speakers.
1
Press the MENU button.
Result:
2
The main menu is displayed.
Press the UP/DOWN ▲▼ button to select the Sound.
Press the LEFT/RIGHT
button.
Result:
The options available in the Sound group are displayed.
3
Press the UP/DOWN ▲▼ button to select the Virtual Dolby.
4
Select the required option by pressing the LEFT/RIGHT
button.
5
Press the MENU button to return to normal viewing.
Adjusting the Volume Automatically
Each broadcasting station has its own signal conditions, and so it is
not easy for you to adjust the volume every time the channel is
changed. Auto volume lets you automatically adjust the volume of
the desired channel by lowering the sound output when the
modulation signal is high or by raising the sound output when the
modulation signal is low.
1
Press the MENU button.
Result:
2
Press the UP/DOWN ▲▼ button to select Sound.
Press the LEFT/RIGHT
button.
Result:
English-28
The main menu is displayed.
The options available in the Sound group are displayed.
3
Press the UP/DOWN ▲▼ button to select the Auto volume.
4
Select the required option by pressing the LEFT/RIGHT
button.
5
Press the MENU button to return to normal viewing.
EN3-PD22EO
7/12/03 11:27 PM
Page 29
Connecting Headphones
You can connect a set of headphones to your TV if you wish to
watch a TV programme without disturbing the other people in the
room.
Plug a set of headphones into the 3.5 mm mini-jack socket on the
panel of the TV.
Result:
The sound is heard through the headphones.
➢
➢
➢
For further details on how to set your headphone
preferences, refer to the section below.
Prolonged use of headphones at a high volume may
damage your hearing.
You will not receive sound from the speakers when you
connect headphones to the system.
Adjusting Your Headphone Preferences
You can adjust the headphone settings to suit your preferences.
The following headphone settings are available:
◆ Volume, Balance, Bass, Treble.
1
Press the MENU button.
Result:
2
Press the UP/DOWN ▲▼ button to select Sound.
Press the LEFT/RIGHT
button.
Result:
3
The main menu is displayed.
The options available in the Sound group are displayed.
Press the UP/DOWN ▲▼ button to select the Headphone sound.
Press the LEFT/RIGHT
button.
Result:
The Headphone sound menu is displayed.
To...
Then...
Change the option
Press the UP/DOWN ▲▼ button.
Change a setting
Press the LEFT/RIGHT
button.
Confirm the changes
Press the MENU button.
English-29
EN3-PD22EO
7/12/03 11:27 PM
Page 30
Selecting the Sound
1
Press the MENU button.
Result:
2
The main menu is displayed.
Press the UP/DOWN ▲▼ button to select Sound.
Press the LEFT/RIGHT
button.
Result:
The options available in the Sound group are displayed.
3
Press the UP/DOWN ▲▼ button to select the Sound select.
4
Select the required option by pressing the LEFT/RIGHT
button.
5
Press the MENU button to return to normal viewing.
➢
The sound of subscreen can be selected only while the
PIP functions is operating.
Picture in Picture Feature
You can display a “Picture-in-Picture screen” within the main picture of
TV programme or Video input. In this way you can watch or monitor
TV programme or the Video input from any connected equipment while
watching TV or other Video input. For information about connection of
other equipment, refer to pages 41 and 42.
1
Press the MENU button.
The main menu is displayed.
Result:
2
Press the UP/DOWN ▲▼ button to select Function.
Press the LEFT/RIGHT
button.
Result:
3
Press the UP/DOWN ▲▼ button to select PIP.
Press the LEFT/RIGHT
button.
Result:
English-30
The options available in the Function group are
displayed.
The options available in the PIP group are displayed.
4
To activate the PIP feature, set the PIP to on by pressing the
LEFT/RIGHT
button.
5
Press the UP/DOWN ▲▼ button to select TV/VIideo.
Then, select a source of the sub picture by pressing the
LEFT/RIGHT
button.
The sources are displayed in the following order:
➞ TV ➞ AV1 ➞ AV2 ➞ AV3 ➞ S-Video
6
To interchange the main picture and the sub picture, select the
Swap option and press the LEFT/RIGHT
button.
EN3-PD22EO
7/12/03 11:27 PM
Page 31
7
Press the UP/DOWN ▲▼ button to select Size. Then, select a
size of the sub to Double Screen1, Double Screen2 or Small
by pressing the LEFT/RIGHT
button.
8
Press the UP/DOWN ▲▼ button to select Prog.No. You can
select the channel that you want to view through sub picture by
pressing the LEFT/RIGHT
button.
9
To return to normal viewing, press the MENU button.
Remote-control functions while “PIP” is “On”:
Features
Description
PIP ON
Used to operate ON/OFF function of PIP directly.
SWAP
Used to interchange the main picture and the sub picture.
➢
When the main picture is in the Video mode and the
sub picture is in the TV mode, you might not hear the
sound of main picture when pressing the SWAP
button after changing the sub picture channel. At this
time, reselect the main picture channel.
➢
The swap function will not operate in PC Mode.
LOCATE
Used to move the sub picture counterclockwise.
P ▼/▲
Used to select the channel of sub picture.
SIZE
Used to select the type of sub picture
(Double Screen1, Double Screen2, Small).
➢
SOURCE
The PC Mode can be setup in the main display only,
and the size of the sub-display small size.
Used to assign a source of sub picture
(TV, AV1, AV2, AV3, S-Video).
English-31
EN3-PD22EO
7/12/03 11:27 PM
Page 32
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the
“Blue screen” mode to “Off”.
1
Press the MENU button.
Result:
2
The main menu is displayed.
Press the UP/DOWN ▲▼ button to select the Function.
Press the LEFT/RIGHT
button.
Result:
The options available in the Function group are
displayed
3
Press the UP/DOWN ▲▼ button to select the Blue screen.
4
Select the required option by pressing the LEFT/RIGHT
button.
5
Press the MENU button repeatedly to return to normal viewing.
Setting the Sleep Timer
You can select a time period of between 30 and 180 minutes after
which the television automatically switches to Standby mode by
pressing the "SLEEP" button.
1
Press the SLEEP button on the remote control.
Result:
Sleep Timer 30
2
If the sleep timer is...
The screen displays...
Already set
Time remaining before the television
will be placed in standby mode.
Not yet set
Word “Off”.
Press the SLEEP button repeatedly and cycle through the preset
time intervals (30, 60, 90, 120, 150, 180).
Result:
3
English-32
The TV automatically switches to standby mode when
the timer reaches 0.
To cancel the sleep timer function, press the SLEEP button
repeatedly and select “Off”.
EN3-PD22EO
7/12/03 11:27 PM
Page 33
Setting and Displaying the Current Time
You can set the TV’s clock so that the current time is displayed when
you press the “DISPLAY" button.
You must also set the time if you wish to use the automatic On/Off
timers.
➣
1
The clock setting will be re-activated when pressing the
“ ” (ON/OFF) button on the front panel.
Press the MENU button.
Result:
2
Press the UP/DOWN ▲▼ button to select the Function.
Press the LEFT/RIGHT
button.
Result:
3
The options available in the Function group are
displayed
Press the UP/DOWN ▲▼ button to select the Time.
Press the LEFT/RIGHT
button.
Result:
4
The main menu is displayed.
The “Time” menu is displayed with the ‘Clock’ selected.
To...
Press the...
Move to the hour or minute
LEFT/RIGHT
Set the hour or minute
UP/DOWN ▲▼ button.
button.
5
When you have finished, press the MENU button or, press the
MENU button repeatedly to return to normal viewing.
6
To display the...
Press the “DISPLAY” button...
Channel information
Once.
Current time
Twice.
➣
Absent power off?
When you set the timer on, your television will be turned
off if you do not operate any controls during 3 hours after
you turn on the TV . This 'Absent power off' function is
available in only 'Timer on' situation. This function will
prevent the leakage accident or dissipation caused by the
occation that your TV will be left in turned on situation for
a long time due to 'Timer on'. (when you are away on
holiday for example)
English-33
EN3-PD22EO
7/12/03 11:27 PM
Page 34
Switching the Television On and Off Automatically
You can set the On/Off timers so that the TV will:
◆ Switch on automatically and tune to the channel of your
choice at the time you select
◆ Switch off automatically at the time you select
➣
1
The first step is to set the TV’s clock (refer to “Setting
and Displaying the Current Time” on the previous page).
Press the MENU button.
Result:
2
Press the UP/DOWN ▲▼ button to select the Function.
Press the LEFT/RIGHT
button.
Result:
3
The options available in the Function group are
displayed.
Press the UP/DOWN ▲▼ button to select the Time.
Press the LEFT/RIGHT
button.
Result:
English-34
The main menu is displayed.
The Time menu is displayed.
4
Press the UP/DOWN ▲▼ button to select the On time.
5
Set the time at which you wish the TV to be switched On.
To...
Press the...
Move to the hour or minute
LEFT/RIGHT
Adjust the hour or minute
UP/DOWN ▲▼ button
Move to the Off
LEFT/RIGHT
Set the On or Off
UP/DOWN ▲▼ button
button
button
6
In the same way, set the time at which you wish the TV to be
switched Off.
7
If you want set the channel when the TV turns on,
press the UP/DOWN ▲▼ button to select the On Prog.No.
Press the LEFT/RIGHT
button to select channel.
8
If you want set the volume level when the TV turns on,
press the UP/DOWN ▲▼ button to select the On time volume.
Press the LEFT/RIGHT
button to adjust volume level.
9
When you have finished setting the On/Off time, On Prog. No or On
time volume, press the MENU button repeatedly to return to normal
viewing.
EN3-PD22EO
7/12/03 11:27 PM
Page 35
Connecting to the PC Input
➢
The PC(VIDEO/AUDIO-ST) connectors are used for interfacing with your PC.
DVI-I 24Pin (Digital)
D-SUB 15Pin (Analog)
Personal Computer
Personal Computer
Rear of the TV
Rear of the TV
PC Signal CABLE
(DVI-I)
PC Signal CABLE
(DVI+D-SUB)
PC AUDIO CABLE
➢
PC AUDIO CABLE
How to Set up Your PC Software ( Based on Windows 2000 or Windows XP )
The Windows display-settings for a typical computer are shown below. But the actual screens on your PC
will probably be different, depending upon your particular version of Windows and your particular video
card. But even if your actual screens look different, the same, basic set-up information will apply in almost
all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
First, click on “Settings” on the Windows start menu.
While “Settings” is highlighted, move the cursor so that
“Control Panel” is highlighted.
When the control panel screen appears, click on
“Display” and a display dialog-box will appear.
Navigate to the “Settings” tab on the display dialog-box.
1280 by 720 pixels
The correct setting of size (resolution) is “1280x 720pixels”.
➢
Only black signal is output
from a monitor in PC mode.
If a vertical-frequency option exists on your display settings
dialog box, the correct value is “60” or “60 Hz”. Otherwise,
just click “OK” and exit the dialog box.
English-35
EN3-PD22EO
7/12/03 11:27 PM
Page 36
Adjusting the Screen Quality
The propose of picture quality adjustment is to remote or reduce
picture noise. If the noise is not removed by fine tuning alone, then
do the frequency adjustments to the utmost and fine tune again.
After the noise has been reduced, re-adjust the picture so that it is
aligned on the center of screen.
Preset to the PC/DVI mode by using the PC button.
1
Press the MENU button.
Result:
2
The main menu is displayed.
Press the UP/DOWN ▲▼ button to select the PC/DVI.
Press the LEFT/RIGHT
button.
Result:
The options available in the PC/DVI group are displayed.
3
Press the UP/DOWN ▲▼ button to select the Coarse or Fine.
4
Press the LEFT/RIGHT
button to adjust the screen quality,
vertical stripes appears or the picture may be blurry.
5
When you are satisfied with the settings, press the MENU button
repeatedly to return to normal viewing.
➣ Coarse and Fine don’t work in DVI-Digital Mode.
Changing the Screen Position
Preset to the PC/DVI mode by using the PC button.
1
Press the MENU button.
Result:
2
The main menu is displayed.
Press the UP/DOWN ▲▼ button to select PC/DVI.
Press the LEFT/RIGHT
button.
Result:
The options available in the PC/DVI group are displayed.
3
Press the UP/DOWN ▲▼ button to select the Position and select
the H-Position or V-Position.
4
Press the LEFT/RIGHT
5
Press the MENU button repeatedly to return to nomal viewing.
button to adjust the required position.
To initialize the image adjustment.
English-36
1
After steps 1~2 above are completed, press the UP/DOWN ▲▼
button to select the Image Recall.
2
Press the LEFT/RIGHT
button to initialize the imag adjustment.
EN3-PD22EO
7/12/03 11:27 PM
Page 37
Changing the Screen Colour Standard
Preset to the PC/DVI mode by using the PC button.
1
Press the MENU button.
Result:
2
Press the UP/DOWN ▲▼ button to select PC/DVI.
Press the LEFT/RIGHT
button.
Result:
3
The main menu is displayed.
The options available in the PC/DVI group are displayed.
Press the UP/DOWN ▲▼ button to select the Colour Adjust,
then press the LEFT/RIGHT
Result:
4
button.
You can select “Custom”, “Colour1”, “Colour2” or
“Colour3”.
Press the MENU button repeatedly to return to normal viewing.
Adjusting the Screen Colour Settings
Preset to the PC/DVI mode by using the PC button.
1
Press the MENU button.
Result:
.2
The main menu is displayed.
Press the UP/DOWN ▲▼ button to select PC/DVI.
Press the LEFT/RIGHT
button.
Result:
The options available in the PC/DVI group are displayed.
3
Press the UP/DOWN ▲▼ button to select the Colour Adjust,
then press the LEFT/RIGHT
button.
4
Press the UP/DOWN ▲▼ button to select the required item you want
adjust.
5
To adjust the...
Press the...
◆ R
◆ G
◆ B
◆ LEFT/RIGHT
6
button.
Press the MENU button repeatedly to return to nomal viewing.
To initialize the Colour adjustment.
1
After steps 1~2 above are completed, press the UP/DOWN ▲▼
button to select the Colour Recall.
2
Press the LEFT/RIGHT
adjustment.
button to initialize the Colour
English-37
EN3-PD22EO
7/12/03 11:27 PM
Page 38
Teletext Decoder
Most TV channels carry “teletext,” pages of written information
that provide information such as:
◆ Television programme times
◆ News bulletins
◆ Weather forecasts
◆ Sports results
◆ Subtitles for the hard of hearing
The teletext pages are organized according to six categories:
Part
Contents
A
Selected page number.
B
Broadcasting station identity.
C
Current page number or search status.
D
Date and time.
E
Text.
F
Status information.
Displaying Teletext Information
You can display teletext information at any time, but signal
reception must be good. Otherwise:
◆ Information may be missing
◆ Some pages may not be displayed
To activate the teletext mode and display the contents page:
1
Using the P
(
) or P
providing the teletext service.
2
Press the Text/Mix (
Result:
) button, select the channel
) button to activate the teletext mode.
The contents page (page 100) is displayed.
It can be redisplayed at any time by pressing
the Menu (
) button.
3
To display the actual broadcast simultaneously with the teletext
page, press the Text/Mix (
/
) button.
4
To return to normal viewing press the Still (
5
Press the Text/Mix (
display.
➣
English-38
/
(
/
)button.
) button again to exit from the TTX
If any broken character appears while TTX is being viewed,
make sure that the TTX language is identical with the
language in the “Function” menu mode. If both languages
are different, select the same language with the TTX
language on the “Function” menu.
EN3-PD22EO
7/12/03 11:27 PM
Page 39
Selecting a Specific Teletext Page
Press the number buttons on the remote control to enter the page
number directly:
1
Enter the three-digit page number listed in the contents by pressing
the corresponding numeric buttons.
Result:
The current page counter is incremented and the page is
then displayed.
2
If the selected page is linked with several secondary pages, the
secondary pages are displayed in sequence. To freeze the display
on a given page, press the Sleep (
). Press the Sleep again to
resume.
3
Using the various display options:
To display...
Press the...
◆ Both teletext information and
the normal broadcast
Text/Mix (
◆ Hidden text
(answers to quiz games, for example)
Dual
(
?
)
◆ The normal screen
Dual
(
?
) again
◆ A secondary page,
by entering its 4-digit number
Subpage (
◆ The next page
P
(
◆ The previous page
P
(
◆ Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
Size (
)
◆ Once
◆ Twice
◆ Normal screen
◆ Three times
1
1
/
)
)
)
)
English-39
EN3-PD22EO
7/12/03 11:27 PM
Page 40
Using FLOF to Select a Teletext Page
The various topics included in the teletext pages are colour-coded,
and can be selected by pressing the coloured buttons on the remote
control.
1
Display the teletext contents page by pressing the Text/Mix (
/
) button.
2
Press the coloured button corresponding to the topic that you wish
to select (The available topics are listed on the status information
line).
Result:
3
4
The page is displayed with additional colour-coded
information that can be selected in the same way.
To display the:
Press the:
Previous page
Red button.
Next page
Green button.
When you have finished, press the Still (
normal broadcast.
) button to return to the
Storing Teletext Pages
Up to four teletext pages can be stored.
1
Select the LIST mode.
Result:
Four 3-digit numbers are displayed in different colours at
the bottom of the screen.
2
Press the coloured button corresponding to the page that will be
replaced.
3
Enter the new page number using the numeric buttons.
4
Repeat steps 2 and 3 for each page to be stored, using a different
coloured button each time.
5
Press the P.Size (
➣
The List/Flof(
◆ LIST mode
◆ FLOF mode
English-40
) button until the corresponding blocks blink.
) button is used to switch between:
EN3-PD22EO
7/12/03 11:27 PM
Page 41
Connecting to the AV1 or 2 SCART Input/Outputs
➢
AV1 is used for equipment with an RGB output, such as video game
devices and video disc players or a VCR.
VCR
Decoder/
Video game device
Rear of TV
➀
SCART 2
Video disc player
and
SCART 1
➀ This end can be fitted with:
Camcorder
Satellite receiver
◆ A SCART connector
◆ Three RCA connectors (video + audio L and R)
Connecting to the RCA Input (AV3)
➢
The RCA (video + audio L and R) connectors are used for equipment
such as camcorders, video disc players and some video game devices.
Camcorder
Rear of TV
Video disc player
Decoder/
Video game device
English-41
EN3-PD22EO
7/12/03 11:27 PM
Page 42
Connecting to the S-Video Input
➢
The S-VIDEO/RCA(AUDIO-L+R) connectors are used for
equipment with an S-Video output, such as a camcorder or VCR.
Rear of the TV
➀
Camcoder
and
VCR
➀ To play pictures and sound both the S-VIDEO and the RCA connections must be used.
Viewing Pictures From External Sources
Once you have connected up your various audio and video systems,
you can view the different sources by selecting the appropriate input.
1
Check that all the necessary connections have been made.
2
Switch the television on and if necessary, press the TV/Video
(
)button one or more times until the required input is displayed.
➢
➢
English-42
Depending on the source selected, the pictures may appear
automatically.
To watch television programmes again, press the
TV/Video(
) button to select the “TV” and select the
number of the channel required.
EN3-PD22EO
7/12/03 11:27 PM
Page 43
Wiring the Mains Power Supply Plug (UK Only)
IMPORTANT NOTICE
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is
indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must
be used.
Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required,
it must be of the same colour as the pin face of the plug. Replacement covers are available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power
point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance.
However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug.
Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
BLUE - NEUTRAL BROWN - LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as
follows:
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK.
The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE
LETTERE OR BY THE EARTH SYMBOL, OR COLOURED GREEN OR GREEN AND YELLOW.
English-43
EN3-PD22EO
7/12/03 11:27 PM
Page 44
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.
No sound or picture
◆
◆
◆
◆
Normal picture but no sound
◆ Check the volume.
◆ Check whether the MUTE (
remote control.
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the “ ” (ON/OFF) button.
Check the picture contrast and brightness settings.
Check the volume.
) button has been pressed on the
No picture or black and white picture
◆ Adjust the colour settings.
◆ Check that the broadcast system selected is correct.
Sound and picture interference
◆ Try to identify the electrical appliance that is affecting the television
and move it further away.
◆ Plug your television into a different mains socket.
Blurred or snowy picture,
distorted sound
◆ Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
Remote control malfunctions
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
“Check Signal Cable” message.
◆ Ensure that the signal cable is firmly connected to the PC sources.
◆ Ensure that the PC sources are turned on.
“Not Supported Mode!” message.
◆ Check the maximum resolution and the frequency of the video
Adapter.
◆ Compare these values with the data in the Display Modes Timing
Chart.
The image is too light or too dark.
◆ Adjust the Brightness and Contrast.
Horizontal bars appear to flicker, jitter
or shimmer on the image.
◆ Adjust the Fine function.
◆ Adjust the Coarse function and then adjust the Fine function.
Vertical bars appear to flicker, jitter or
shimmer on the image.
◆ The TV is using its power management system.
◆ Move the computer’s mouse or press a key on the keyboard.
Screen is black and power indicator
light is steady blinks 1 second.
◆ Check that your PC is normally operated, not in the power saving
mode, or the signal cable is connected well.
English-44
EN3-PD22EO
7/12/03 11:27 PM
Page 45
Image is not stable and may appear to
vibrate.
◆ If the setting is not correct, use your computer utility programme to
change the display settings.
NOTE: Your TV supports multiscan display functions within the
following frequency domain:
Image is not centered on the screen.
◆ Horizontal frequency:
30 kHz ~ 48 kHz
◆ Vertical frequency:
56 Hz ~ 75 Hz
◆ Maximum refresh rate:
1280 x 720 @ 60 Hz
◆ Adjust the horizontal and vertical position.
Dot Defect
TFT LCD panel manufactured by using advanced semiconductor technology with precision of 99.999%
above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE colour seem to be
bright sometimes or some of black pixels could be seen.
This is not from bad quality and you can use it without uneasiness.
The number of TFT-LCD pixels : 2,764,800
English-45
EN3-PD22EO
7/12/03 11:27 PM
Page 46
Display Modes
If the signal from the system equals to the standard signal mode, the screen is adjusted
automatically. If the signal from the system doesn’t equal to the standard signal mode, adjust
the mode with refering to the Videocard user guide because the screen might not display or
only the power LED might be on. For the display modes listed below, the screen image has
been optimized during manufacture.
Mode
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
Frequency
(MHz)
640✕480
35.000
66.667
30.240
-/-
832✕624
49.726
74.551
49.500
+/+
640✕480
31.469
59.940
25.175
-/-
720✕400
31.469
70.087
28.322
-/+
640✕480
37.861
72.809
31.500
-/-
640✕480
37.500
75.000
31.500
-/-
800✕600
37.879
60.317
40.000
+/+
800✕600
48.077
72.188
50.000
+/+
800✕600
46.875
75.000
49.500
+/+
1280✕720
44.769
60.000
74.841
-/+
Resolution
Sync Polarity
(H/V)
MAC
IBM
VESA
GTF
English-46
EN3-PD22EO
7/12/03 11:27 PM
Page 47
Attaching a wall or Arm mounting Device
The TV supports VESA mounting standard for use with various VESA mounting
devices. To install any VESA mounting device, please follow the instructions given.
<A>
<B>
<C>
1
Remove all cable connected on the TV.
2
Remove the four screws and then remove the Stand from the LCD TV. (refer to the picture A&B)
Remove all cable connected on the TV.
3
Push the stand cap until it clicks, as shown in Figure C.
4
Connect all cable you removed at step 1.
5
Now you are ready to install Wall/Arm mounting device depending on your applications.
English-47
EN3-PD22EO
7/12/03 11:27 PM
Page 48
Installing VESA Compliant mounting Device
Align the mounting interface pad with the holes in the rear cover mounting pad and secure it
with the four screws that came with the arm-type base, wall mount hanger or other bases.
Rear cover
English-48
Mounting pad
EN3-PD22EO
7/12/03 11:27 PM
Page 49
Kensington Slot
Cable
Figure2
Figure1
The Kensington lock is a device used to physically fix the system when using it in a public place. The locking
device has to be purchased separately. The appearance and locking method may differ from the illustration
depending on the manufacturer. Please refer to the manual provided with the Kensington lock for proper use.
1
Insert the locking device into the Kensington slot on the LCD TV(figure 1), and turn it in the locking
direction(figure 2).
2
Connect the Kensington lock cable.
3
Fix the Kensington lock to a desk or a heavy stationary object.
English-49
EN3-PD22EO
7/12/03 11:27 PM
Page 50
Specification
Model
LW22A13W
Panel
Size
Display Size
Type
Pixel Pitch
Viewing Angle
22.0 inch Diagonal
487.68(H) ✕ 274.32(V)mm
a-si TFT active matrix
0.381(H) ✕ 0.381(V)mm
85/85/85/85 (L/R/U/D)
*Frequency
Horizontal
Vertical
30~48 kHz
56~75 Hz
Display Colour
16,777,216 colours
Maximum Mode
1280 ✕ 720 @ 60 Hz
Input Signal
Sync.
Video signal
H/V Separate, TTL, P. or N.
0.7 Vp-p @ 75 ohm
TV
Colour system
Sound system
PAL, SECAM, NTSC 4.43
B/G, D/K, I, L, L’
Video
Colour system
Video system
PAL/NTSC/SECAM
CVBS, S-VHS, RGB
Scart 1
Video In/output
Audio In/output
RGB Input
1.0 Vp-p @ 75 ohm
500mVrms
0.7 Vp-p @ 75 ohm
Scart 2
Video In/output
Audio In/output
1.0 Vp-p @ 75 ohm
500mVrms
Power Supply
Input
Output
AC 100 ~ 240 V(50Hz / 60Hz), 2A
DC 14V / 8A
Display
Resolution
* Referring to Display Modes, page 46.
English-50
EN3-PD22EO
7/12/03 11:27 PM
Page 51
Specification
Model
LW22A13W
Power
Consumption
Maximum
Power Saving
Dimensions/
Weight
Unit (WxDxH) :
TV body
Audio
Characteristics
23.62 x 2.63 x 17.46 inch/15.65 lbs
(600 x 66.8 x 443.5mm/7.1 kg)
23.62 x7.28 x 18.43 inch/19.4 lbs
(600 x 185 x 468mm/8.8 kg)
With stand
Environmental
Considerations
120W
<5W
Operating
Temperature
Operating
Humidity
Storage
Temperature
Storage
Humidity
50 °F to 104 °F (10 °C to 40 °C)
10% to 80%
-13 °F to 113 °F (-25 °C to 45 °C)
5% to 95%
RCA Jack Red(R) White(L), 0.5Vrms (-9dB)
3.5ø Stereo Jack, 0.5Vrms (-9dB)
Max. 10mW Output (3.5ø Stereo Jack 32)
Audio Input 1
Audio Input 2
Headphone
out
Frequency
Response
Audio out
RF: 80Hz ~ 15kHz (at- 3dB)
A/V: 80Hz ~ 20kHz (at - 3dB)
7W ✕ 2 (Option : Active Woofer 500mV
RMS at 20 - 150Hz)
Pin Assignments
Pin DVI Connection
Pin
1
2
3
4
5
6
Separate
H/V
Rx 2-
Rx 2+
GND
Pin
9
10
11
Separate
H/V
Rx 1-
Rx 1+
GND
Pin
17
18
19
Separate
H/V
Rx 0-
Rx 0+
GND
Pin
25(C3)
26(C5)
27(C4)
28(C2)
29(C5)
30(C1)
Separate
H/V
Analog
(Blue)
Analog
GND
Analog
Horizontal Sync
Analog
(Green)
Analog
GND
Analog
(Red)
7
8
No
No
DDC Clock DDC Data Analog
Connetion Connetion
(SCL)
(SDA) Vertical Sync
12
13
14
15
16
Self
Laster
Output Signal
Connetion
22
23
24
GND
Rx C-
Rx C+
No
No
DDC Input
Connetion Connetion Power(+5V)
20
21
No
No
Connetion Connetion
English-51
EN3-PD22EO
7/12/03 11:27 PM
Page 52
THIS APPLIANCE IS DISTRIBUTED BY:
ELECTRONICS
Download PDF

advertising