Samsung | GX-SM550SH | Samsung Digitalreceiver GX-SM550SH Benutzerhandbuch

USER MANUAL
GX-SM550SH
Samsung Electronics (UK) Ltd, Euro QA Lab.
Blackbushe Business Park
Saxony Way, Yateley, Hampshire
GU46 6GG United Kingdom
(Ed.03)
The purpose of Safety Concerns is to ensure users’ safety and to prevent property losses.
Please read this document carefully for proper use.
TRADEMARKS
Product names mentioned in this document may be trademarks and/or registered trademarks
of their respective companies.
 The term STB used in this manual represents this product of HD+ Satellite Receiver.
WEEE SYMBOL INFORMATION
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This marking on the product, accessories or literature indicates that the product and its electronic
accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at
the end of their working life. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate these items from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
BATTERY SYMBOL INFORMATION
Correct disposal of batteries in this product
This marking on the battery, manual or packaging indicates that the batteries in this product should not
be disposed of with other household waste at the end of their working life. Where marked, the chemical
symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference
levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm
to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of
waste and recycle them through your local, free battery return system.
This guide may be changed for product improvement, standardization or other technical reasons without prior
notice.
© 2014 SAMSUNG ELECTRONICS Co., Ltd. Alle Rechte vorbehalten.
Information in this document is proprietary to SAMSUNG ELECTRONICS Co., Ltd.
No information contained here may be copied, translated, transcribed or
duplicated by any from without the prior written consent of SAMSUNG.
Information in this document is subject to change without notice.
Safety Information
Warning
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE
PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates "dangerous
voltage" inside the product that
presents a risk of electric shock or
personal injury.
CAUTION: TO REDUCE THE RISK OF
This symbol indicates important
ELECTRIC SHOCK, DO NOT REMOVE COVER instructions accompanying the product.
(OR BACK) NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Do not install this equipment in a confined space such as a bookcase or similar unit.
WARNING
To prevent damage which may result in fire or electric shock hazard, do not expose this appliance to rain or
moisture.
CAUTION
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NsOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
This product satisfies CE regulations when shielded cables and connectors are used to connect the unit to other
equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use
shielded cables and connectors for connections.
IMPORTANT NOTE
If the power plug on this unit does not fit the wall outlets in your house, have the wall outlets replaced with
outlets that fit by a licensed electrician. If the power cord is not long enough, obtain a suitable, safety-approved
extension cord. If you have questions about the power cord or plug, or need additional help, consult your dealer
for assistance.
To turn off this unit completely, you must disconnect it from the wall outlet. Consequently, the unit's power plug
must be readily accessible at all times.
This product is manufactured under license in accordance with certain intellectual property rights of certain
third parties.
01
ENG
The purpose of the Safety Concerns section is to ensure the safety of users and prevent
property damage. Please read this document carefully for proper use.
Safety Information  Handling Cautions
Handling Cautions
WARNING
• Never remove the top cover of this product. There are no user-serviceable parts inside it.
• Make sure all electrical connections are properly made.
• Connect all equipment to the unit first, and then plug in their power cords.
• Disconnect the STB’s power plug from the wall outlet before you disconnect any equipment from the
product’s rear panel.
• Never push anything into the holes, slots or other openings in the case.
• If the supplied power plug does not fit your wall outlets DO NOT plug it in. Have the wall outlets replaced with
appropriate wall outlets by a qualified electrician.
• To turn off this product completely, you must disconnect it from the wall outlet. Consequently, the unit's
power plug must be readily accessible at all times.
CAUTION
• Do not move the STB when it is on.
• Do not use or store the STB in hot, cold, damp or dusty places.
• Do not block the ventilation holes of the STB. Leave a space of at least 5cm around all sides.
• Never place the STB on soft furnishings or carpets.
• Do not put anything on the STB which might spill liquid into it or place it in an environment where it may be
subject to moisture or rain.
• Do not place the STB on top of other powered electrical equipment such as an amplifier or DVD player.
• Do not operate in an enclosed space such as a Hi-Fi cabinet.
• Do not allow the power cable or DC wire from the power supply to become trapped under any object,
crushed or jammed in a cabinet door.
• Do not clean with spray polish.
• Only dust with a dry cloth.
• Do not place the STB in front of a heat source such as a radiator or fire.
• Do not throw away used batteries near flammable areas.
Copyright
© 2014 SAMSUNG ELECTRONICS Co., Ltd.
All rights reserved. No part of this user’s manual may be reproduced or copied without the prior written
permission of SAMSUNG ELECTRONICS Co., Ltd.
02
About the product-----------------------------------------------------06
Key Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06
Media file format compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06
Contents your product can play............................................................................. 06
Supported Formats................................................................................................ 07
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connections------------------------------------------------------------ 13
Connecting to a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Connecting to an Audio System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Method 1) Connecting to an HDMI supported AV receiver................................... 16
Method 2) Connecting to an AV receiver with Optical input................................. 16
Connecting to a Network Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Wired Network...................................................................................................... 17
Connecting the Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Settings----------------------------------------------------------------- 19
The Setup Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Run the first installation procedure....................................................................... 19
Scanning................................................................................................................ 21
Software Upgrade.................................................................................................. 23
Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Accessing the Settings Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Remote Control..................................................................................................... 25
Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
ASTRA channel list update..................................................................................... 26
Auto tune............................................................................................................... 26
Manual tune.......................................................................................................... 27
Installation type..................................................................................................... 27
Guide timeline....................................................................................................... 30
HbbTV.................................................................................................................... 30
Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Preferred audio type.............................................................................................. 31
Digital volume control........................................................................................... 31
Audio primary........................................................................................................ 31
Audio secondary.................................................................................................... 31
Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Screen resolution................................................................................................... 32
3D mode................................................................................................................ 32
Anti flicker.............................................................................................................. 32
HDMI aspect ratio.................................................................................................. 32
03
ENG
h
Contents
Contents
HDMI video convertion.......................................................................................... 33
TV Scart aspect ratio.............................................................................................. 33
TV Scart video conversion...................................................................................... 33
TV Scart.................................................................................................................. 33
Information banner timeout.................................................................................. 33
Screen saver........................................................................................................... 33
HDCP Enabled........................................................................................................ 33
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Language............................................................................................................... 34
Automatic subtitles................................................................................................ 34
Subtitles primary................................................................................................... 34
Subtitles secondary............................................................................................... 34
Text subtitle encoding............................................................................................ 34
Library / Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Media auto open................................................................................................... 35
Instant recording................................................................................................... 35
Initial-guard time................................................................................................... 35
Final-guard time.................................................................................................... 35
HDD/USB storage settings..................................................................................... 35
Media renderer...................................................................................................... 35
Media renderer name............................................................................................ 36
UPnP blocked devices............................................................................................ 36
Smart card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Smart card information......................................................................................... 37
Change Smartcard PIN-Code................................................................................. 37
System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Product information.............................................................................................. 38
Auto Turn off.......................................................................................................... 38
Timeout to power off............................................................................................. 38
Network settings.................................................................................................... 39
Reset to default settings........................................................................................ 40
Software upgrade.................................................................................................. 41
Change STB PIN-Code............................................................................................ 43
Open source licenses............................................................................................. 43
Using the Basic Functions----------------------------------------------44
Watching TV Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Using the remote control buttons......................................................................... 44
Switching channel.................................................................................................. 45
Volume control...................................................................................................... 45
Audio language...................................................................................................... 45
Subtitle language................................................................................................... 45
Viewing the service Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Channel Information.............................................................................................. 46
04
Contents
Using the Library------------------------------------------------------- 57
Contents & Timer list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Contents................................................................................................................ 57
Timer..................................................................................................................... 57
To select all/deselect all timers.............................................................................. 57
To delete the timer................................................................................................ 58
To sort timers......................................................................................................... 58
To add timer........................................................................................................... 58
To edit timer.......................................................................................................... 58
Media Play-------------------------------------------------------------- 59
Playing Files on a USB Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Controlling Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
To delete the files.................................................................................................. 60
To copy the files..................................................................................................... 60
To move the files.................................................................................................... 60
To create a new folder........................................................................................... 61
To sort the files...................................................................................................... 61
To select all the files............................................................................................... 61
To deselect all the files.......................................................................................... 61
Using the DLNA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Appendix---------------------------------------------------------------64
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Licence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Network Service Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Allgemeine Geschäftsbedingungen HD+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Limited Warranty to Original Purchaser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Open Source Announcement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
05
ENG
Program Information............................................................................................. 48
Signal Information................................................................................................. 48
Viewing the EPG information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Using the Timer..................................................................................................... 49
Viewing Program information................................................................................ 50
Searching programs............................................................................................... 50
Pausing and rewinding live TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Recording programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Channel list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Locking channels.................................................................................................... 53
Favourites list......................................................................................................... 53
Sorting channel list................................................................................................ 55
Using the HbbTV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
About the product
Key Feature
Image Display of HD Grade
Supports high-resolution video output of up to 1080p, enabling you to enjoy clear and sharp video.
Electronic Program Guide (EPG) Function
Using the EPG Channel Guide, you can check the program information and broadcasting schedule of a desired
channel, and schedule the programs to watch.
Enjoy Contents with an External USB Device
Allows you to play media files using a USB storage device.
Convenient recording function
You can record TV or radio programs on an external USB storage device by pressing the REC button on the
remote control or scheduling recording of programs via the EPG for instance.
Dolby Digital Plus Sound
Produces realistic digital sound by connecting the product to a STB amplifier through the HDMI port which
supports Dolby Digital Plus.
Media file format compatibility
Contents your product can play
Contents
Media
Details
VIDEO / MUSIC / PHOTO
USB
Video, music and photos stored in USB drive.
06
About the product  Media file format compatibility
Supported Formats
*.avi
*.wmv
*.asf
*.mp4
*.mpg
*.mpeg
*.ts
*.mov
*.mkv
*.xvid
Container
AVI
MKV
ASF
MP4
MOV
TS
Video Codec
VC1/WMV-9
H264
MPEG4
SP/ASP
(Xvid)
MPEG2
Resolution
Frame rate
(fps)
1920x1080
15~30
Bit rate
(Mbps)
Audio Codec
20
AC3
AC3+
MPEG1
MPEG2
LPCM
HE-AAC
(SBR+PS)
WMA
WMA PRO
• Limitations
-- Even when the file is encoded by a supported codec listed above, a file may not be played if there is a
problem with its content.
-- Normal playback is not guaranteed if the file's container information is wrong or the file itself is corrupted.
• The supported subtitle formats are microdvd, srt and vobsub embedded in containers *.txt and *.srt
• The supported music file format is mp3 and the supported picture file format is jpeg.
Notes on the USB connection
• The STB supports USB 2.0 mass storage devices such as USB flash drives and USB HDD. It also supports
connection of the drives via USB HUB.
• The USB input has power limitation (max. current 1A) which can result as insufficient power supply for the
drives after connecting too many devices at once to passive HUB. Recommended is usage of the HUB with
external power supply.
• There is no limitation neither size nor speed for the drive to be used in media library, to store pictures or
music. Nevertheless there are minimum requirements to assign device to PVR functionality. This minimum
requirements are recommended to play video from the drive.
• Minimum requirements for PVR:
-- Capacity more than 16GB
-- Minimum write speed 8MB/s
-- Minimum read speed 16MB/s
• Recommended drive file system is ext4, but STB supports ext2, ext3, FAT16, FAT32, NTFS (read-only mode).
Note that xFAT file system is not supported. You can always format drive to ext4 file system using STB
functionality ([Settings] > [Library / Media] > [HDD/USB storage settings]).
• Using slow drives may result in a long time of loading media.
• The STB does not support media with DRM (Digital Rights Management) downloaded from commercial sites.
• The STB does not support PTP protocol (Picture Transfer Protocol).
• Do not remove USB storage device while in use (recording, formatting, etc.).
• SAMSUNG is not responsible for any loss of data on USB storage device.
07
ENG
File
Extension
About the product  Accessories
Accessories
Check for the supplied accessories below.
Remote Control/
Batteries for Remote Control
(AAA Size)
Power Adapter
SCART Gender Cable
HD+ Supplement
User Manual
Smart Card
\\ You can purchase the cable accessories (not supplied with the product) from a local Samsung
dealer.
Not supplied cable:
- HDMI cable
- Coaxial cable
- LAN cable
- Optical cable
08
About the product  Front Panel
Front Panel
ENG
This section describes the button and LEDs at the front panel.
Channel button
USB port
REMOTE CONTROL SENSOR
Status LED
POWER button
\\ Status LED : Glows green when the STB is on active mode.
Glows red when the STB is on standby mode. If the LED is not glowing, press the Power button on
your remote control to turn your product on.
Rear Panel
This section describes the names and functions of the ports on the rear panel.
2 ANT IN
1 Smart Card Slot
4 HDMI OUT
3 OPTICAL OUT
5 LAN
7 DC POWER
6 EXT (TV)
1
To insert the Smart Card.
2
To connect the Satellite antenna cable from your cable system.
3
A digital audio output port, which is connected to an audio system with an OPTICAL OUT port with an
optical cable.
4
To connect to TV with an HDMI cable.
5
LAN connection to router for interactive functionality.
6
To connect a TV with a SCART gender cable.
7
To connect external power adaptor.
09
About the product  Remote Control
Remote Control
This section describes the function of each button on a remote control.
Put the STB in stand-by mode (no
signal to TV).
TV power on/off.
Press number buttons to enter
numeric value or to access
channels directly.
Switch to TV channel list or
Radio channel list.
Used to toggle between normal &
muted audio.
Volume adjustment.
Used to open up the menu.
Access HD+ Smart TV options
(Not in use).
Used to open Tools submenu in
channel list.
Move the highlight bar for
selecting options on the menu.
Return to the previous menu.
To execute as corresponding
colors shown on the menu.
Display Teletext pages if available.
Used to select an audio track
available for current channel.
10
Tune to the previously viewed
channel.
Press to change TV or Radio channels.
Displays the scanned channel list.
Displays the EPG (Electronic Program
Guide.)
Displays the program information in
the screen.
Press it once and channel information
appears.
Press it twice and detailed
information appears.
Enter and confirm any data to the
receiver in the menu system.
Press to exit the menu.
Record a program showing currently
or scheduled for recording.
Used to select a subtitle available for
current channel.
• Rewind: Rewind the program/
recording/Go back 24 hours
• Play/Pause: Play and pause the
program/recording /Change to Time
Shift mode
• Stop: Stop the playback or recording
• Forward: Fast-forward the program/
Move forward 24 hours in EPG
About the product  Remote Control
Installing batteries
ENG
\\ If the remote does not operate properly:
-- Check the polarity +/– of the batteries.
-- Check if the batteries are drained.
-- Check if the remote sensor is blocked by obstacles.
-- Check if there is any fluorescent lighting nearby.
\\ Dispose of batteries according to local environmental regulations. Do not put them in the
household trash.
\\ Two identical and new batteries should be used for the remote control.
\\ When a remote control is not used for a long time, remove the batteries.
Setting the Remote Control to Operate Your TV
• To determine whether your television is compatible, follow the instructions below.
1. Turn your television on.
2. Point the remote control towards the television.
3. Press the TV button to set the remote to TV mode.
4. Press and hold the TV button, and then enter the two-figure code in the table to the right that corresponds
to the brand of your television by pressing the appropriate number buttons.
If your television is compatible with the remote control, it will turn off. The remote is now programed to
operate the TV.
\\ If several codes are listed for your television brand, try each one in turn until you find one that
works.
\\ If you replace the remote control’s batteries, you must set the brand code again.
You can control the TV function below with this remote control.
Button
Function
TV
Use to turn the television on and off.
\\ The function above will not necessarily work on all televisions. If you encounter problems, use the
TV remote control.
11
About the product  Remote Control
TV Control Codes
Brand
SAMSUNG
Code
TV+01, +02, +03, +04, +05, +06, +07, +08, +09
AIWA
TV+82
ANAM
TV+10, +11, +12, +13, +14, +15, +16, +17, +18
Brand
NOKIA
NORDMENDE
Code
TV+74
TV+72, +73, +75
PANASONIC
TV+53, +54, +74, +75
PHILIPS
TV+06, +55, +56, +57
BANG & OLUFSEN
TV+57
PHONOLA
TV+06, +56, +57
BLAUPUNKT
TV+71
PIONEER
TV+58, +59, +73, +74
BRANDT
TV+73
RADIOLA
TV+06, +56
BRIONVEGA
TV+57
RADIOMARELLI
CGE
TV+52
RCA
TV+45, +46
TV+75
REX
TV+74
SABA
TV+57, +72, +73, +74, +75
CONTINENTAL
EDISON
DAEWOO
TV+19, +20, +23, +24, +25, +26, +27, +28, +29,
+30, +31, +32, +33, +34
EMERSON
FERGUSON
FINLUX
TV+57
SALORA
TV+74
TV+64
SANYO
TV+41, +42, +43, +44, +48
TV+73
SCHNEIDER
TV+06
SELECO
TV+74
TV+36, +37, +38, +39, +48
TV+06, +49, +57
FORMENTI
TV+57
SHARP
FUJITSU
TV+84
SIEMENS
TV+71
GRADIENTE
TV+70
SINGER
TV+57
SINUDYNE
TV+57
GRUNDIG
HITACHI
IMPERIAL
TV+49, +52, +71
TV+60, +72, +73, +75
TV+52
JVC
TV+61, +79
LG
TV+06, +19, +20, +21, +22, +78
SONY
TELEAVA
TELEFUNKEN
THOMSON
TV+35, +48
TV+73
TV+67, +73, +75, +76
TV+72, +73, +75
LOEWE
TV+06, +69
THOMSON ASIA
LOEWE OPTA
TV+06, +57
TOSHIBA
MAGNAVOX
TV+40
WEGA
TV+57
METZ
TV+57
YOKO
TV+06
ZENITH
TV+63
MITSUBISHI
MIVAR
TV+06, +48, +62, +65
TV+52, +77
NEC
TV+83
NEWSAN
TV+68
NOBLEX
TV+66
12
TV+80, +81
TV+47, +48, +49, +50, +51, +52
Connections
Connecting to a TV
You can connect your product to your TV using one of the methods illustrated on page 13 or 14.
Method 1)
Connection to a TV with the EXT(TV) Port - Scart Connection
This section describes how to connect to a TV with Scart cable.
TV
SCART Gender Cable
1. Connect the small end of the Scart cable gender(supplied) to the EXT(TV) port at the rear of your STB.
2. Connect the large end(scart jack) of the Scart cable gender to your TV using an scart cable(not supplied).
3. Turn on the product and TV.
4. Press the input selector on your TV remote control until the signal from the product appears on the TV
screen.
13
ENG
This section describes the connection to peripherals. Connect the peripherals (TV, DVD,
etc.) referring to the descriptions in the following page.
Connections  Connecting to a TV
Method 2)
Connection to a TV with the HDMI Port
This section describes how to connect to a TV with an HDMI cable.
TV
Audio
Video
1. Connect the product to your TV using an HDMI cable.
2. Turn on the product and TV.
3. Press the input selector on your TV remote control until the signal from the product appears on the TV
screen.
\\ High Definition Multimedia Interface (HDMI) is a video-audio integrated port to provide high
definition images by connecting a STB to an HD TV. Connect it to the HDMI input port (not output
port) on an HD TV.
\\ Do not connect the power cord until you have made all the other connections.
\\ When you change connections, turn off all devices before you start.
\\ An HDMI cable outputs digital video/audio, so you don’t need to connect an audio cable.
\\ If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the
Digital Audio Out on the product to an audio system to hear audio.
\\ Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user
manual of your TV.
\\ When you connect the product to your TV for the first time using an HDMI cable or connect it to
a new TV using an HDMI cable, it will automatically set the HDMI output resolution to the highest
supported by the TV.
\\ HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise
appears on the screen.
14
Connections  Connecting to a TV
Supported HDMI CEC function on Remote control
• Automatic power off (when the Standby button is pressed on the TV, the TV goes to standby mode together
with the STB)
• Automatic power on (when the Standby button is pressed on the STB, the STB wakes up from standby mode
together with the TV)
• Remote control command sending; the following remote control buttons are supported: channel change,
menu, guide, channel list and arrows.
ANT IN Connection
Connect an RF coaxial cable(not supplied) to the cable wall outlet and the ANT IN port at the rear of the STB.
15
ENG
Anynet+ is a convenient function that offers linked operations with other Samsung products that have the
Anynet+ feature. To operate this function, connect this product to an Anynet+ Samsung TV using an HDMI cable.
The STB supports HDMI Anynet+ functionality (extensions of the HDMI CEC standard). This makes it possible to
control the STB using a TV remote control (or to control the TV using the STB remote control in the case of the
automatic power on function).
Supported functions are:
Connections  Connecting to an Audio System
Connecting to an Audio System
HIMI OUT
Audio
Method 2
HIMI IN
TV
HIMI IN
Method 1
Audio / Video
1. Connect the product to an audio system using one of the two methods illustrated above.
2. Turn on the product, audio system, and TV.
-- Do not connect the power cord until you have made all the other connections.
-- When you change the connections, turn off all devices before you start.
3. Press the input selectors of the connected audio system and TV until the video signal from the product
appears on your TV and you hear the audio signal through your audio system.
Method 1)
Connecting to an HDMI supported AV receiver
• Use an HDMI cable (not included)
Method 2)
Connecting to an AV receiver with Optical input
• Use an Optical Cable (not included)
16
Connections  Connecting to a Network Router
Connecting to a Network Router
ENG
You can connect your product to your network router using illustrated on page.
Wired Network
Broadband modem
(with integrated router)
Broadband
service
Or
Router
Broadband
modem
Broadband
service
\\ Internet access to Samsung’s software update server may not be allowed, depending on the router
you use or your ISP’s policy. For more information, contact your ISP (Internet Service Provider).
\\ DSL users, please use a router to make a network connection.
\\ To use the Samsung Link function with your PC, you must connect your PC to your network.
17
Connections  Connecting the Power
Connecting the Power
After connecting your STB to your TV, connect the included power adaptor to the STB, and then plug the power
adaptor with power cord into a wall socket. When you plug in the power adapter for the first time, the STB will
turn on automatically and display the first installation screen.
To turn off the product, press the Power button on your remote control. To turn it on, press the Power button
again.
T
t
Power Adapter
\\ If power is disconnected from the STB while it is operating normally, the product will turn on
automatically when power is reconnected.
\\ If the STB has been turned off or left unplugged for more than 1 week, the device may lose
authorization for satellite TV services. To restore satellite TV services, please contact your satellite
TV service provider.
18
Settings
The Setup Procedure
ENG
• The OSD (On Screen Display) of this product may change after you upgrade the software version.
\\ You can download the latest user manual on www.samsung.de
• The access steps may differ depending on the menu you selected.
Turn on your TV after connecting the STB. When you connect the STB to a TV for the first time, the product
turns on automatically and the first installation screen appears. See 'Run the first installation procedure' below.
\\ When you connect the power to the STB for the first time, the product turns on automatically. This
is normal operation.
Run the first installation procedure
1. You have to insert the Smart Card into the Smart Card slot on the rear of the STB.
2. Plug in the STB, and then turn on your TV. When you connect the STB to a TV for the first time, the product
turns on automatically and the first installation screen appears. If the installation screen does not appear,
change the TV’s source setting to the source you’ve connected the product to (for example, HDMI 1, HDMI
2). For instructions, see your TV’s user’s manual.
3. Use the ▲▼ buttons to select an installation mode,
and then press the v button. (Auto/Manuelles).
Select [Weiter (Next)], and then press the v
button on the remote control.
-- [Auto]: In this mode the STB will automatically
select all such settings as resolution, language
and screen ratio. The STB will next automatically
detect the Astra 19.2E and/or HotBird satellites,
perform quick scanning and complete the
installation procedure. For more information
about quick scanning, see 'Quick Scanning' on
page 21.
4. When you select [Manuelles(Manual)], then you
can do the installation according to your selections.
Use the ▲▼ buttons to choose a language on the
language selection window, and then press the
v button. Select [Next], and then press the v
button on the remote control.
19
Settings  The Setup Procedure
5. Use the ▲▼ buttons to choose a TV ratio, and then
press the v button. Select [Next], and then press
the v button on the remote control.
6. Use the ▲▼ buttons to choose a resolution, and
then press the v button. Select [Next], and then
press the v button on the remote control.
7. Use the ▲▼ buttons to choose a search type, and
then press the v button. Select [Next], and then
press the v button on the remote control. For
more information about quick scanning, see 'Quick
Scanning' on page 21.
-- [Auto Search]: This option will linearly scan all
transponders on the Astra and HotBird satellites
one by one.
-- For advanced configuration of SatCR or satellite
dish with positioned motor, please skip this step
and configure the settings manually
-- When you press skip button all previous settings
as (language, aspect ratio, screen resolution, etc)
will be saved but the service scanning will not be
performed.
20
Settings  The Setup Procedure
Scanning
ENG
There are three different scanning options.
Quick Scanning
This is the recommended scanning type; it is the simplest
and the fastest. It downloads the complete channel list
from a dedicated Astra transponder:
1
111
12.60375
GHz
Horizontal
22000
KS/s
5/6
DVB-S
QPSK
2
108
12.55150
GHz
Vertical
22000
KS/s
5/6
DVB-S
QPSK
3
57
10.83225
GHz
Horizontal
22000
KS/s
3/2
DVB-S2
8PSK
\\ If the STB is in the SatCR environment, then there can’t be any scanned channel.
In that case, you have to upgrade the software according to the USB update way, NOT the OTA
update way.
The USB update is described in [Settings] > [System] > [USB Update] in detail. (Refer to page 42.)
21
Settings  The Setup Procedure
Auto Scanning
Auto scanning performs channel search on all predefined
transponders of the selected satellite.
After successful scanning, a results screen appears with
showing the numbers of the TV and radio channels
found. Select [Save] and press the v button to confirm.
\\ Auto scanning can take several minutes
depending on the satellite selected.
Manual Scanning
Manual scanning allows the user to scan particular
transponders. Predefined transponder parameters may
be used or the transponders to be scanned may be set
manually.
22
Settings  The Setup Procedure
Software Upgrade
ENG
1. You have to upgrade your STB with the latest software to use all the functionalities.
-- The detail upgrade way is described in [Settings] > [System] > [Software upgrade].
2. SatCR environment users have to do the [USB Update] way for the first time.
-- Refer to page 42 to do the software upgrade by the [USB Update] way.
23
Settings  Main Menu
Main Menu
1
6
2
5
4
3
1
Guide : View the program schedule, select programs to watch, and view information about future
programs. (See page 49.)
2
Channel : Displays the list of channels memorized. (See page 53.)
3
Library : Provides access to and allows management of the list of recorded material. (See page 57.)
4
Media : Plays videos, photos or music content from an external USB storage device. (See page 59.)
5
Info : Displays information about the channel currently being watched. (See page 46.)
6
Settings : Set various functions to suit your personal preferences. (See pages 25~43.)
24
Settings  Accessing the Settings Screen
Accessing the Settings Screen
ENG
1. Press the MENU button on the remote control. The
Main menu appears.
2. Select [Settings], and then press the v button.
3. To access the Settings menus, sub-menus, and
options, please refer to the remote control
illustration and the Settings Control Button table in
the below.
Remote Control
Settings Control Button Table
1
MENU Button : Press to show the Main menu.
2
RETURN Button : Return to the previous menu.
3
3
v (Enter) / DIRECTION Buttons :
Press the ▲▼◀▶ buttons to move the cursor or select an
item.
Press the v button to activate the currently selected
item or confirm a setting.
4
4
EXIT Button : Press to exit the current menu.
1
2
25
Settings  Channel
Channel
You can configure various channel options.
ASTRA channel list update
Astra channel list update is the simplest and fastest way of scanning services. This option allows you to Change
or Update the channel list available for the ASTRA satellite network.
If channel list has not been chosen previously, please select Change option and press the v button. The STB
will start looking for all available channel lists. Please select one of them and press the v button to scan all
services from the list. Once the services have been scanned, please select [Save] and press the v button to
save them.
If a channel list has already been scanned, you can choose the Update option to update the channel list.
Updating of the channel list is also performing automatically when the STB is booted and when the STB wakes
up from the standby mode.
Auto tune
When you select this option, the STB automatically scans
and indexes all channels received through the STB's cable
input connector. The channels in the index of channels
then appear when you press the CH LIST button on your
remote control.
After successful scanning, a result screen appears with
showing the numbers of TV and radio channels found.
Select [Save], and then press the v button to confirm.
\\ If an index of channels already exists, it will be overwritten.
26
Settings  Channel
Manual tune
ENG
To scan the channel list of a satellite manually, follow
these steps.
1. Select the [Channel] option using the ▲/▼ button,
and then press the ▶ button.
2. Select the [Manual tune] option using the ▲/▼
button, and then press the ▶ button.
3. Select an option you want using the ▲/▼ button,
and set its value using the ◀/▶ button.
4. When you are finished setting options, select
[Search], and then press the v button to confirm.
Installation type
Your product allows controlling the position of the
satellite positioner. You can choose one of the two
possible installation types: [LNB] or [SATCR].
Changing between those installation types will cause
removing all services and Favorite Lists. You will be asked
to confirm whether this operation should be proceeded
or not.
1. If the [Installation type] option is set to [LNB], additional [LNB Settings] and [Positioner] will appear in the
[Channel] menu.
LNB Settings
It is possible to change current LNB settings in
accordance with your antenna configuration.
27
Settings  Channel
Positioner
According to this option, you can disable or enable the
positioner.
You can select one of the following options: [Enabled] or
[Disabled].
Positioner Settings
If the [Positioner] option is set to [Enabled], additional
[Positioner Settings] option will appear in the [Channel]
menu. You are able to use one of the following options:
[User settings] or [Installer settings].
◈◈ Installer settings
These settings should be done while mounting the
antenna with a motor and shouldn’t be changed during
normal use. It is to set limits on the positioner motor
if the satellite dish can’t move over whole driver angle
(~180 degrees). These limits are important because if
on the way of the dish from one side you have the wall
and someone remove the limits from this side dish can
be destroyed.
In the [Installer settings], you will be able to:
-- Set East limit
-- Set West limit
-- Go to initial position
-- Disable limits
28
Settings  Channel
◈◈ User settings
ENG
In the [User settings] Menu, you are able to:
-- Drive West
-- Drive East
-- Store Position
-- Move to Stored Position
For Drive West/East two options are possible
-- [Continuous]: If you press the button, the motor
drives until the button is released.
-- [Step]: If you press the button, the motor drives by
several degrees only.
Each satellite has its own slot number. So after correct
dish adjustment, you must store it as the current
position. This stored position will be used for the dish
moving during scanning or channel change.
2. If the [Installation type] option is set to [SATCR], additional [Signal Cable settings] option will appear in
[Channel] menu.
Signal Cable settings
SatCR allows the connection up to 8 STBs via single
coaxial cable.
There are 4 and 8 slot devices available on the market.
Each device must have assigned to unique slot number
and its corresponding frequency.
Splitters must be used to connect STBs to common
coaxial cable.
SatCRs support switching between two satellites
(DiSEqC A and DiSEqC B) but only few devices have
implemented this functionality.
For 4 slot SatCR the following frequencies for devices are available on market.
-- 1210 MHz
-- 1420 MHz
-- 1680 MHz
-- 2040 MHz
For 8 slot SatCR the following frequencies for devices are available on market.
-- 1284 MHz
-- 1748 MHz
-- 1400 MHz
-- 1864 MHz
-- 1516 MHz
-- 1980 MHz
-- 1632 MHz
-- 2096 MHz
29
Settings  Channel
Guide timeline
This menu specifies the standard for setting the time interval for the display of the program list on a channel
guide screen. The longer the interval the more programs can be checked on a single screen.
HbbTV
You can launch a Hybrid Broadcast Broadband TV interactive service while watching a TV program.
To use an HbbTV service, you have to select [On] for this option and connect the STB to the internet.
30
Settings  Sound
Sound
ENG
You can configure various audio options such as the
[Prefered audio type], [Digital volume control], etc.
Preferred audio type
This allows selection of which audio type (Stereo or Multichannel) should be used when both are available on
the service selected.
Digital volume control
This menu allows turning on/off volume control for HDMI and SPDIF digital outputs. The default value is off
because the volume of some audio formats, such as AC3, cannot be controlled by the STB. If this setting is set to
[On], you can control the volume but the digital audio output becomes available in PCM format instead.
Audio primary
You can change the audio language other than your preferred Audio language.
Audio secondary
You can change the language for the Audio secondary, which is available if an Audio secondary service is
provided by the program provider.
\\ Audio primary and secondary options are settings for audio tracks selection preference. That
is, when primary set to Deutsch, and secondary to English, an Deutsch track will be selected by
default, if available. If Deutsch track is unavailable, English track will be selected.
31
Settings  Picture
Picture
You can configure various display options such as the
[Screen resolution], [HDMI aspect ratio], etc.
Screen resolution
This allows you to set the output resolution of the video signal. The number indicates the number of lines of
video per frame. The i and p indicate interlaced and progressive scan, respectively. The more lines, the higher
quality.
3D mode
This allows setting of 3D mode if the service selected
provides 3D signal.
Select [Auto] to enable 3D mode if mode is recognized
from the signal.
Select [Off] to disable 3D mode.
If 3D mode is not recognized automatically although
service is in the 3D format, you can force this mode
manually:
-- [SBS-3D] : Convert SIDE-BY-SIDE 3D format to the 3D
view
-- [SBS-2D] : Convert SIDE-BY-SIDE 3D format to the 2D
view
-- [TB-3D] : Convert TOP-BOTTOM 3D format to the 3D view
-- [TB-2D] : Convert TOP-BOTTOM 3D format to the 2D view
\\ If you use one of the forced 3D formats (not Auto) you should remember to set 3D mode to [Off]
or [Auto] when you change channel, because standard 2D channels will not display correctly.
Anti flicker
This allows turning on and off of the anti-flicker filter. This option may improve analogue video quality.
HDMI aspect ratio
This lets you adjust the output of the STB to the screen size of your TV when you connect them by using an
HDMI cable.
32
Settings  Picture
HDMI video convertion
ENG
This allows you to change the screen output type when you connect them using an HDMI cable.
HDMI aspect ratio
HDMI video convertion
4:3
Setting for how standard programs
display on a widescreen TV
[Auto], [Letter box], [Centre cut out],
[Stretch], [None]
16:9
Setting for how widescreen programs
display on a standard TV
[Auto], [Pillar box], [Centre cut out],
[Stretch], [None]
TV Scart aspect ratio
This lets you adjust the output of the STB to the screen size of your TV when you connect them by usng a TV
Scart cable.
TV Scart video conversion
This allows you to change the screen output type when you connect the TV and STB by using a Scart cable.
Screen output types are the same as the HDMI video conversion. Refer to the above table of HDMI video
conversion.
TV Scart
SCART analogue output may provide CVBS signal only or both CVBS and RGB. Generally RGB signal provides
better quality. Setting this option does not affect HDMI digital output.
Information banner timeout
This allows you to change the display time for the service information that appears at the top of the screen
when you change channels or press the INFO button.
Screen saver
You can set the time delay for the screen saver.
If there is no input from the remote control for a given period of time, the menu window disappears and the
screen saver is activated.
\\ The screen saver is enabled only when any part of OSD is visible. It will be never shown during
watching television.
HDCP Enabled
This function allows you to either enable or disable HDCP for programs that are broadcasted without copy
protection.
But you cannot disable HDCP against the copy protected programs.
33
Settings  Language
Language
You can configure on-screen message language as well as
subtitle languges. The selected language will only appear
if it is supported.
Language
On Screen Display (OSD) is used to change the language of the menu screen.
Automatic subtitles
This allows you to enable/disable subtitles, or change to Hearing Impaired.
Subtitles primary
This allows you to change the primary language for the subtitles.
Subtitles secondary
This allows you to change the secondary language for the subtitles. Subtitles are available when a secondary
language service is provided by the program provider.
Text subtitle encoding
This allows you to choose the subtitle encoding format for files played from USB Hard Disk Drive storage.
34
Settings  Library / Media
Library / Media
ENG
You can configure various options related to recording
and USB storage setting.
Media auto open
Allows you to automatically open the library/media when a USB memory stick is inserted.
Instant recording
This allows you to choose the automatic recording of the program currently being watched. A temporary
recording starts when you change from the channel you are watching to another one and stops when you
change channels again. Note that when one temporary recording stops, it is deleted and another starts at the
same time.
Initial-guard time
This allows you to set how many minutes will be recorded in advance before your scheduled recording should
be started.
Final-guard time
This allows you to set how many minutes will be recorded more after your scheduled recording should be
ended.
HDD/USB storage settings
When a USB Hard Disk Drive is not connected this option is not available. When connecting a USB HDD it is
possible to choose the option and to get information about used and free space and also to format or attach/
detach the connected USB HDD for PVR purposes.
Media renderer
DLNA Media Renderer is one DLNA functionality that enables you to remotely control viewing of content on
device. Instead of browsing DMS directly on STB, you can browse DMS on tab or phone and also control from
there playback of content on STB. DMR is advertising itself on network, so it is available to every DLNA Media
Controller in local network.
35
Settings  Library / Media
Media renderer name
DLNA Media Renderer is visible in network under certain name so called friendly name. Predefined value is [STB]
+ ip address of STB. This name can be changed via Settings menu: Library - Media Renderer name.
UPnP blocked devices
The list of Media Controllers that were blocked by is shown. When one Media Controller (Tab, Phone or Other
application) tries to render contents in STB, a banner is shown if you allow it. If not, then the device is added to
the list of the blocked devices.
36
Settings  Smart card
Smart card
ENG
You can see information about the Smart Card inserted
and change the Smart Card PIN code.
Smart card information
When you select this option, the STB displays the information about inserted Smart Card.
Change Smartcard PIN-Code
This option allows changing of an inserted Nagravision Smart Card’s PIN code.
The Smartcard’s PIN Code is not the same as the STB’s PIN code and is not set to 0000 when performing a reset
to default settings.
37
Settings  System
System
You can check product information or reset the STB to
default settings.
Product information
This menu displays the product information: [Brand ID],
[Product ID], [Firmware version], [Software version],
[Micom version], [Serial number] and [Last software
update].
Auto Turn off
This lets you set the STB go into the standby mode automatically from live mode if your STB is not being used
for the setting up time.
When [Auto Turn off] is set to one of the available timeout values and the STB is idle for a certain period of
time, the product saves energy by turning off the STB automatically.
\\ If the STB has been turned off or left unplugged for more than 1 week, the device may lose
authorization for satellite TV services. To restore satellite TV services, please contact your satellite
TV service provider.
Timeout to power off
This lets you set the STB go into the deep standby mode automatically from the standby mode. The deep
standby mode means the most Low Power mode and the STB is required to reboot when it turns on.
When [Timeout to power off] is set to one of the available timeout values and the STB gets turned off for a
certain period of time on the standby mode status, the product saves energy the most by powering off the STB
automatically.
38
Settings  System
Network settings
◈◈ Automatic
1. Press the MENU button on the remote control.
2. Select [Settings] > [System], and then press the ▶ button.
3. Select [Network settings], and then press the ▶ button.
4. Select [Automatic] in the Network Settings screen.
5. Select [OK], and then press the v button. The STB detects the wired connection, verifies the network
connection and then connects to the network.
◈◈ Manual
If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network
Settings parameters manually.
1. Select [Manual] in the Network Settings screen.
2. Enter IP address, Mask, Gateway and DNSs manually.
\\ You can get the Network parameters from your Internet provider.
3. Select [OK] to save settings, and then press the v button.
39
ENG
Before you begin, contact your ISP to find out if your IP address is static. If it is dynamic, and you have a wired
network, we recommend using the Automatic configuration procedures described below.
Connect the STB to your router using a LAN cable before you start the configuration procedure.
To begin configuring your network connection, follow these steps:
Settings  System
Reset to default settings
Resets all settings to their default settings. The default
PIN is 0000.
To Reset to the default, follow these steps:
1. Press the MENU button.
2. Select [Settings] > [System], and then press the ▶
button.
3. Select [Reset to default settings], and then press
the ▶ button.
4. Enter the PIN code by using the number buttons.
5. Select [Reset to defaults], and then press the v
button to confirm.
6. When the factory reset is, completed the product
will restart and the first installation procedure starts
again on the screen.
\\ You must enter your 4 digit PIN by using the number buttons on the remote control to access the
Reset function.
If you have not set a PIN, use the default PIN: 0000.
\\ Please note that once you perform the [Reset to default settings], all data such as the channel
setting, channel list and all user configured data will be deleted.
40
Settings  System
Software upgrade
ENG
The Software Update menu allows you to upgrade the STB's software for performance improvement or
additional services.
\\ Never turn the STB off during the update process.
\\ When the update is completed, the STB turns off and then turns on again by itself.
\\ SAMSUNG ELECTRONICS takes no legal responsibility for STB malfunction caused by consumer
negligence during a software Update.
\\ When recording is in progress you cannot use this functionality.
\\ If the main image is broken and it is impossible to perform a software update from the menu, the
Force Update function can be used.
Reboot the STB and keep pressing the [CH ] (Channel DOWN) button on the front panel. The
Loader application will try to update the image from USB, if connected, or from the satellite.
OTA Update
You can use manual update to update the software through your network connection.
1. Press the MENU button on the remote control.
2. Select [Settings] > [System] > [Software upgrade] and then press the v button.
3. Choose OTA mode by pressing the ▶ button.
4. Select [Search] and press the v button.
5. A [Searching for new software] window appears on the screen and searching is performed automatically.
Searching can be cancelled by pressing the v on the [CANCEL] button.
6. If there is a new software, then a [Software upgrade] window appears on the screen.
When you select [Yes], then the STB restarts and the upgrade selection window appears.
7. When you can see the [Schedule] button on the upgrade selection window, then you have to select it for
the first OTA Update time.
If you can't see the [Schedule] button on the window, then you have to select the [Yes] button for the first
time.
41
Settings  System
USB Update
You can update the software by using a USB flash drive.
1. Visit www.samsung.de
2. Click SUPPORT > Startseite on the top right of the page.
3. Enter the product's model number into the search field. As you enter the model number, a drop down will
display products that match the model number.
4. Left click your product's model number in the drop down list.
5. On the page, that appears, then scroll down and then find Firmware.
6. Click "Datei Upgrade File(USB type)(MainAppImage)" for Main SW Image and click "Datei Upgrade
File(USB type)(LoaderImage)" for Loader Image.
7. Click Send in the first pop-up that appears.
Click OK in the second pop-up to download and save the firmware file to your PC.
8. Copy the files(LoaderImage.bin and MainAppImage.bin) to the main directory of your USB flash drive.
9. Insert the USB flash drive into the USB port of the STB.
10. In the STB’s menu, go to [Settings] > [System] > [Software upgrade].
11. Select [USB] in the mode and select [Search], and then press the
v button on the remote control.
12. The STB searches for the software on the USB drive. When it finds the software, the software can be
updated.
13. The STB turns off and then turns on automatically to upgrade the software.
\\ When the software upgrade is done, check the software details in [Settings] > [System] > [Product
Information].
\\ Do not turn off the STB during the software Update. It may cause the product to malfunction.
\\ Software Updates using the USB jack must be performed with a USB flash memory stick only.
42
Settings  System
Change STB PIN-Code
ENG
This function works in conjunction with the Parental
Rating function which requires you to enter a PIN before
it allows access.
You can change the 4-digit PIN used to access the
Parental Rating function. To change the PIN, follow these
steps:
1. Press the MENU button on the remote control.
2. Select [Settings] > [System] and then press the ▶
button.
3. Select [Change STB PIN-Code], and then press the
▶ button.
4. Under [Current STB PIN code], enter the old PIN by using the number buttons on your remote.
5. Under [New STB PIN code], enter the new PIN by using the number buttons.
6. Under [Confirm new STB PIN code], enter the new PIN again.
7. Select [Save], and then press the v button on your remote. When the PIN is changed successfully, then
[PIN code changed] message appears.
\\ The default password is set to 0000.
Open source licenses
This provides information about open source licenses used in the product.
43
Using the Basic Functions
Watching TV Channels
After Auto scanning is completed, you can watch your TV channels.
Using the remote control buttons
To use these buttons, see the table on the right.
1
1
NUMBER buttons : To move to a TV channel directly, press
the number buttons that correspond to the desired TV
channel.
2
CH button : Press this button to change TV channels.
3
EPG button : Press this button to open Electronic Program
Guide.
4
INFO button : Press this button to display detailed channel
information.
5
TOOLS button : Press this button to use additional options.
6
AUDIO button : Lets you select another audio track in a
different language if the TV program provides multi track
sound.
7
SUB button : Lets you turn on/off DVB or TXT subtitles in
a different language if the TV program provides subtitle
tracks.
8
TEXT button : Press this button to display Teletext pages if
available. Teletext is a free service broadcast which gives the
latest information on news, weather and many other topics.
You can use interactive services in teletext mode.
2
3
4
5
6
6
7
8
44
Using the Basic Functions  Watching TV Channels
Switching channel
ENG
You can switch the current channel by pressing the CH
button or entering the channel number directly using
the NUMERIC(0-9) buttons.
• Press the TV/RADIO button to switch between TV
channels and radio channels.
• You can switch channels by using the channel list,
program banner or TV guide.
• To return to the previous channel, press the PRE-CH
button.
Volume control
You can adjust the volume level using the VOLUME +/- button.
• Press the MUTE button to disable the audio.
• Press the MUTE button again or VOLUME +/- buttons in order to enable the audio.
Audio language
You can select another audio track in a different
language available for current channel.
• Press the AUDIO button to display audio language
banner.
• Use the ▲/▼ button to select preferred language,
and then press the v button.
• Press the AUDIO button again or EXIT button to close
the banner.
Subtitle language
You can select another subtitle in a different language available for current channel.
• Press the SUB button to display subtitle language
banner.
• Use the ▲/▼ button to select preferred language,
and then press the v button.
• Press the SUB button again or EXIT button to close
the banner.
45
Using the Basic Functions  Viewing the service Information
Viewing the service Information
Pressing the INFO button displays a channel information.
Pressing the INFO button on the remote control displays information about the channel being watched. Pressing
the INFO banner twice makes more detailed information appear. Pressing it three times produces a display of
current tuner information, including data on signal strength and quality.
Channel Information
You can see the channel info banner by pressing once
the INFO button while watching a program.
• You can see the next programs on current channel
and another channel by using the ▲/▼/◀/▶
buttons.
• You can check the current program’s status (channel,
title and broadcast time).
Channel
change
Start time
Channel
number
Current program
progress
Current
program name
Current program
category
Program time
Program
descriptions
End time
Current time
and date
Next program
Information
icons
Video aspect
ratio
Source Video
Resolution
46
Channel
list name
Audio
format
Display icons
Icon
Definition
Icon
Definition
Favourite channel
Dolby Digital Sound
Lock channel
Dolby Digital Plus Sound
HD channel
Audio description
SD channel
DVB Subtitle
Parental Lock
Digital text
Watch timer
New recording
Record Timer
Subtitle available
Video aspect ratio
Audio stereo
Audio mono
Recording in progress
AAC sound
AAC+ sound
Digital Theater Systems
Video source resolution
Multi Sound
47
ENG
g
Using the Basic Functions  Viewing the service Information
Using the Basic Functions  Viewing the service Information
Program Information
You can see the synopsis of current watching program by pressing the INFO button twice.
• Press the EXIT button to close the banner.
d
T
t
Signal Information
You can see the signal information by pressing the INFO button three times.
• Press the INFO button again or EXIT button to close
the banner.
48
Using the Basic Functions  Viewing the EPG information
Viewing the EPG information
When you press the EPG button on the remote
control while watching TV program, the EPG screen is
displayed.
The color button on the remote control is operated by
the functions displayed at the bottom of a screen:
• Press the ▲/▼/◀/▶ buttons to navigate programs.
• Select a channel in the Guide, and then press the
v button to jump to that program right away if the
program is on now.
• Jump backward/forward two hours by using red or
green button.
• Jump backward/forward one day by using yellow or blue button.
Search by Day/Time/Category/Search Text/Genre using the TOOLS button.
• Press the EXIT button to return to the program you have been watching.
• To set a reminder or recording, highlight the upcoming program that interests you and press the v button.
You can also set a recording by highlighting a program and pressing the REC button.
• You can view the list of scheduled programs from [Library] > [Timer].
Using the Timer
You can set two types of "Timer".
• Select the desired program from the program list.
• Press the REC button on the remote control for the record timer.
• Press the v button on the remote control for the watch timer.
• To the right of the chosen program, the “record” or "watch" icon will be visible.
• If there is a "Timer" conflict appropriate information will be displayed.
• In the case of "Watch" timer, when the progrmme is starting, a pop-up with this information will be displayed
on the screen.
• Pressing the REC button, or v button again on the program to cancel the timer.
49
ENG
EPG (Electronic Program Guide) provides users with television, radio, and other media applications with
continuously updated menus that display broadcast programming and scheduling information for current and
upcoming programs.
The EPG information is provided by broadcasters.
Using the Basic Functions  Viewing the EPG information
Viewing Program information
1. Select a channel in the EPG screen, and then press
the INFO button on the remote control.
2. The program's detail information will appear in
the banner on the screen.
t
T
l
T
m
t
I
ti
b
Searching programs
You can search program by selecting the appropriate
search options(Day/Time/Genre/Category/Search text).
1. Press the TOOLS button on the remote control.
2. Select the desired option and set it as you want.
-- If you press the v button on the Search Text
menu, you can search for program by entering
words or characters by using the virtual keyboard
popped up.
3. Select [OK], and then press the v button.
4. The [Search results] window appears.
W
i
T
50
Using the Basic Functions  Pausing and rewinding live TV
Pausing and rewinding live TV
ENG
If [Settings] > [Library/Media] > [Instant Recording] is
turned on, the STB automatically temporarily saves the
TV channel being watched or the radio channel being
listened to, starting 5 seconds after last channel change.
This time shifting mode makes it possible to stop live
mode, rewind and review the program that was recorded
the moment before.
If [Instant Recording] is turned off, you can start this
time shift mode manually by pressing either the p or (
button while watching live TV or listening to live radio.
• Press the p button to freeze the live program.
Press the p button again to resume the paused
program.
Press the ( button to rewind the recorded program.
Press the ) button to fast-forward the recorded
program.
\\ Fast-forward functionality may be blocked or its speed may be limited by the content provider’s
request. In such case proper info banner will appear.
• To go back to the live program, press the @ button.
• You can increase the rewind/fast-forward speed by pressing the ( or ) button again.
• You can use the ◀ or ▶ button to jump backwards or forwards.
When this mode is on, pressing INFO button shows the channel information. Current program progress bar
marks the recorded and seen content with blue while recorded. The unseen part of the content is shown in
green.
• You can watch recorded program by selecting it with ◀ and ▶ buttons from within channel information and
pressing OK button.
• Press the REC button to store recorded program in the [Library].
Watching the stored recording from the [Library] will not stop this recording. This recording will be lost
immediately after it is stopped.
The maximum temporary recording length is 2 hours.
\\ Before using this function you must connect an external USB storage device to the USB port on the
STB.
51
Using the Basic Functions  Recording programs
Recording programs
You can record a program not only whilst watching the
desired program, but also after selecting the desired
program from the information banner, the TV guide or
the Search menu.
To record TV channels or Radio programs, press the REC
button on the remote control.
• Programs to be recorded display a red icon in the
information banner and the channel list.
• If the program is to be broadcasted at a later time or
day, the STB will automatically book it, and will record
it when it is broadcasted.
• You can see the recorded programs list in the [Library]
List by pressing the MENU button and select the
[Library] category.
• Press the @ button or REC button in the program you
are recording to stop video recording.
• You can delete a booked program in the Library List.
\\ Before using this function you must connect
an external USB storage device to the USB
port on the STB.
52
Using the Basic Functions  Channel list
Channel list
Press the CH LIST or v button on the remote control
while watching TV program. The channel list will be
displayed.
\\ The actual latitude/longitude and channel
settings of [ASTRA 19,2° (TV)] may differ
from the locations of installed ASTRA
satellite antenna.
Locking channels
You can lock a specific channel. Once locked, you must enter your PIN code in order to view those locked
channels.
Select a channel in the Channel list, and then press the Red button on the remote control to lock a channel.
Favourites list
You can designate frequently watched channels as Favourites. Favourite channels are identified in Edit favourites
and the Channel list with the
symbol. You can create new favourite channel list. You can also edit Favourite
channel lists.
To display the favourite lists screen, press the Yellow
button on your remote control in the Channel list.
53
ENG
The Channel list displays the list of channels memorized and indexed during the Scanning process. On the
Channel list screen, you can select and change channels, lock and unlock channels, view indexed channels by
sort order (name, number), and access and edit Favourites.
Using the Basic Functions  Channel list
Create new favourite channel list
Add a channel to new favourite channel list.
1. In the Channel list, press the Yellow button.
2. Select the [Create new favourites list], and then
press the v button. The virtual keyboard appears.
3. Input the favourite list name using the pop-up
keyboard.
4. When finished, select [Save] on the keyboard, and
then press the v button. The [Edit favourite list]
screen appears.
5. In the [ASTRA 19,2° (TV)], select channel you want
to add by highlighting the channel.
6. Press the v button to add the selected channel to
the favourite channel list.
7. If you add all necessary channel to favourite
channel list, press the RETURN button on the
remote control.
Remove Favourite Channels
Remove channels from a Favourite channels list.
1. In the Channel list, press the Yellow button.
2. Press the ▶ button on the remote control to go to a favourite channel list.
3. In the favourites channel list, select channel you want to delete by highlighting the channel
4. Press the v button to delete the channels from the list.
5. After all modification, press the RETURN button on the remote control.
54
Using the Basic Functions  Channel list
Sorting channel list
ENG
Sort the channels in the Channel list. You can order the
list by name or number.
1. In the Channel list, press the TOOLS button on the
remote control.
2. Select the sort option you want, and then press
the v button.
55
Using the Basic Functions  Using the HbbTV
Using the HbbTV
HbbTV(Hybrid Broadcast Broadband TV) is a major new pan-European initiative aimed at harmonizing the
broadcast and broadband delivery of entertainment to end consumers through connected TVs and set-top
boxes. If the satellite TV service provider which you are subscribed to offers the interactive service, you can
launch it at any time by pressing the RED button on the remote control while watching a TV program.
If an HbbTV (Hybrid Broadcast Broadband TV) option
is supported by the program, you can start HbbTV by
using the RED button on the remote control when
HbbTV supporting program is displayed on screen.
To use the HbbTV service, connect your STB to
the internet (Refer to Page 17, CONNECTING TO A
NETWORK ROUTER, and Page 39, Network setting, for
the detail information) and select [On] for HbbTV
option([Settings] > [Channel] > [HbbTV]). The default
setting is [Off].
56
Using the Library
Contents & Timer list
Contents
You can see a list of the TV programs that you have
recorded and are recording.
• Press the INFO button on the remote control to
display the program information of the selected
recording.
• Press the v button on the remote control to
playback the selected content.
Timer
You can see the list of scheduled programs.
Playback related buttons
• To return to normal speed playback, press the p button.
p button
Pause or resume playback.
@ button
Stops playback.
Fast Rewind
During playback, press the ( button.
Each time you press the ( button, the Fast Rewind speed will change.
Fast Forward
During playback, press the ) button.
Each time you press the ) button, the Fast Forward speed will change.
To select all/deselect all timers
1. Press the TOOLS button on the remote control.
2. Select [Select All] or [Deselect All], and then press the v button on the remote control.
57
ENG
This function launches the PVR list by using the [Library / Media] menu.
Cyclic recordings can be browsed within their own folders. You may play a selected
recording and browse through it using Rewind, Forward, Pause and Play. You can also
delete selected recordings. If you want to use this function, you must connect the
external HDD to the USB port on the STB.
Using the Library  Contents & Timer list
To delete the timer
1. Select a timer by pressing the Yellow button on the remote control.
2. Press the TOOLS button on the remote control.
3. Select [Delete] on the pop-up window and press the v button on the remote control.
To sort timers
1. Press the TOOLS button on the remote control.
2. Select [Sort], and then press the v button on the remote control.
3. Choose the sorting mode and sorting order.
4. Confirm with the v button on the remote control.
To add timer
1. Press the TOOLS button on the remote control.
2. Select [Add timer], and then press the v button on the remote control.
3. You can now select the Type, Bouquet, channel, Date, Start, Stop, Frequency, Initial-guard time, Final guard
time and title of the new timer.
To edit timer
1. Select a timer by pressing the Yellow button on the remote control.
2. Press the TOOLS button on the remote control.
3. Select [Edit timer], and then press the v button on the remote control.
4. You can now select the Type, Bouquet, channel, Date, Start, Stop, Frequency, Initial-guard time, Finalguard time and title of the edited timer.
58
Media Play
Playing Files on a USB Device
You can play contents by using a USB storage device.
To connect a USB storage device, follow the following steps:
1. Turn the STB on.
2. Connect the USB storage device containing photos, music and/or movie files to the USB port at the front of
the product.
3. Press the MENU button on the remote control.
4. Select [Media], and then press the v button.
-- When the USB storage device is connected to the product, you can see the USB directory on the Media
screen.
5. Select Photo, Music, Video or All, and then press
the v button.
6. Use the ▲▼ buttons to select the desired device and then press the v button.
Depending on how the contents are arranged, you will see either folders, individual files, or both.
7. If necessary, use the ▲▼ buttons to select a folder, and then press the v button.
8. Use the ▲▼ buttons to select a file to view or play, and then press the v button.
9. Press the RETURN button to browse up in a sub folder.
10. Press the EXIT button from any position or press the RETURN button on the root folder to return to the
Live TV.
\\ Even though the STB will display folders for all content types, it will only display files of the Content
Type you select in Step 5. For example, if you select music, you will only be able to see just music
files. You can change this selection by returning to the Photo, Video and All screen.
59
ENG
Your STB can play the contents located on the USB devices.
It is also possible to navigate through menus, selecting items, viewing information about items, browsing and
playing/viewing an item. You can delete, copy, move, sort, select and deselect all items on the storage medium
by pressing the TOOLS button and choosing an option from the list. You can also create a new folder on the
storage medium by pressing the TOOLS button and choosing the option "New folder".
Media Play  Controlling Playback
Controlling Playback
You can control the playback of media file located on an external USB storage device. Depending on the
contents, some of the functions described in this manual may not be available.
• Press the p button on the remote control to pause or resume playback.
• Press the @ button on the remote control to stop playback.
• During playback or in pause mode, press the TOOLS button on the remote control to show progress bar.
• You can see additional information by pressing the INFO button on the remote control if a file has additional
information.
\\ Depending on the storage device, the Tools menu may differ. All options may not be displayed.
To delete the files
1. Select the files by pressing the Yellow button on the remote control.
2. Press the TOOLS button on the remote control.
3. Select [Delete] on the pop-up window.
4. Confirm with the v button on the remote control.
To copy the files
1. Select files by pressing the Yellow button on the remote control.
2. Press the TOOLS button on the remote control.
3. Select [Copy] on the pop-up window.
-- Press the Green button to create a new folder.
-- Press the Red button to see the root folder.
4. Select the destination folder to be copied by navigating in the pop-up window.
5. Press the Yellow button to confirm.
To move the files
1. Select the files by pressing the Yellow button on the remote control.
2. Press the TOOLS button on the remote control.
3. Select [Move] on the pop-up window.
-- Press the Green button to create a new folder.
-- Press the Red button to see the root folder.
4. Select the destination folder to be copied by navigating in the pop-up window.
5. Press the Yellow button to confirm.
60
Media Play  Controlling Playback
To create a new folder
ENG
1. Press the TOOLS button on the remote control.
2. Select [New Folder] on the pop-up window, and then press the v button on the remote control.
3. Input the name of the new folder by using the ▲/▼/◀/▶ and v buttons on the remote control.
4. Confirm with the [Save] button on the pop-up window.
To sort the files
1. Press the TOOLS button on the remote control.
2. Select [Sort] on the pop-up window, and then press the v button on the remote control.
3. Choose the sorting mode and the sorting order you want to do.
4. Confirm with the v button on the remote control.
To select all the files
1. Press the TOOLS button on the remote control.
2. Select [Select all] on the pop-up window, and then press the v button on the remote control.
To deselect all the files
1. Press the TOOLS button on the remote control.
2. Select [Deselect all] on the pop-up window, and then press the v button on the remote control.
61
Media Play  Using the DLNA
Using the DLNA
DLNA functionality gives you to share digital contents between STB and other multimedia devices, control the
contents remotely and render the contents by using external device e.g. phone. The STB supports DLNA Media
Player and DLNA Media Renderer device profiles.
DLNA Media Player allows you to perform the following operations:
• Discover DLNA media servers
I
a
D
f
• Show the list of media servers available in [Media/
Network].
• Refresh the list of servers by sending M-SEARCH
request.
W
ti
F
a
n
• Browse all servers as classic storage directory and
display files according to DLNA type provided by server
or extension (if available).
62
Media Play  Using the DLNA
ENG
• Play files similarly to playback from USB or HDD.
For more information about playback from USB or
HDD, see 'Playing Files on a USB Device' on page 59.
In the DLNA, Trick modes are not supported, audio jumps
are limited to 15 second steps and files are not cached.
DLNA Media Renderer profile allows you to perform the
following operations:
• Turn on/off [Media renderer] from [Settings] > [Library
/ Media] menu.
• Operate [Media renderer] via DLNA Media Controller
device or program – preferably a phone or a tab.
• Change the Renderer’s name in Settings menu.
When a device is requesting the playback for the first
time, a banner is shown and you can make decision.
For the [Media renderer] trick modes are not supported,
audio jumps are limited to 15 second steps and files are
not cached.
Network configuration
Default gateway must be set properly.
Additional information
1. Specification: DLNA v1.5.
2. Supported media profile
a. Video:
i. MPEGTS_SD_EU (normal, iso)
ii. MP4 (as a content type not as a profile)
iii.MPEG_PS_PAL
iv. WMV
b. Audio: i. MP3
ii. PCM (LPCM)
iii.WMA (Base, Full, Pro)
c. Image: i. JPEG (small, large, medium)
63
Appendix
Troubleshooting
No operation can be performed with the remote control.
yyCheck the batteries in the remote control. They may need replacing.
yyOperate the remote control at a distance of no more than 6.1 m.
yyRemove the batteries and hold down one or more buttons for several minutes to drain the microprocessor
inside the remote control to reset it. Reinstall the batteries and try to operate the remote control again.
Play mode differs from the [Media] Menu selection.
yySome of the functions selected in the [Media] Menu may not work properly if the content file is not encoded
with the corresponding function.
The screen aspect ratio cannot be changed.
yyThis is not a problem with the STB.
No sound comes out from TV or audio equipment.
yyIf the cable is connected normally, check if the MUTE function is enabled. If the MUTE function is enabled,
press the MUTE button on the remote control to disable it.
Blank screen, No HDMI output or No SCART output.
yyCheck if your TV set is power ON
yyCheck if your STB is power ON
yyCheck the connection between the TV input port set and the STB output port.
yyCheck if your TV input source is correct
-- When you use HDMI, then the TV input source must be [HDMI] or the connected [HDMI (port No)] if
there are one more HDMI input ports.
-- When you use SCART, then the TV input source must be [AV]. The use of SCART isn’t recommended due to
the low resolution.
yyIf the HDMI output is set to a resolution your TV cannot support (for example, 1080p), you cannot see a
picture on your TV.
yyPress the MENU button and then select [Auto] or the TV possible resolution option in [Settings] > [Picture]
> [Screen resolution] in another TV which supports the setup resolution on the STB(for example, 1080p).
-- When you select [Auto], the maximum resolution is set up available on TV.
yyPress the MENU button and then select [Settings] > [System] > [Reset to default settings] in another TV
which supports 1080p. When the factory default settings are restored, all stored user data is deleted.
Forgot password
yyCall the service center of Samsung Germany.
-- Samsung Germany Call center: 01806 7267864
64
If you experience other problems.
-- Samsung Germany Call center: 01806 7267864
Abnormal HDMI output screen.
yyIf random noise appears on the screen, it means that TV does not support HDCP (High-bandwidth Digital
Content Protection).
yyPlug Out/In the TV and the STB again.
First installation screen is shown again after performing the [Reset to default settings].
yyIt is a correct operation. When you perform the [Reset to default settings] in [Settings] > [System], All
settings including the PIN will revert to the factory settings. When the factory default settings are restored,
all stored user data is deleted.
During the booting, ‘No signal’ screen keeps over one minute.
yyCheck if your STB is power ON
yyCheck the connection between the TV input port set and the STB output port.
yyPlug out the STB for over 2 seconds and then plug it in.
65
ENG
yyGo to the table of contents and find the section of the user manual that contains the explanations regarding
the current problem, and follow the procedure once again.
yyIf the problem still cannot be solved, please contact your nearest Samsung authorized service center.
Appendix  Specifications
Specifications
Model Name
USB port
▪▪GX-SM550SH
▪▪USB 2.0 Host x 1 (1A)
General
Power
▪▪Net Weight: 0.6 Kg
▪▪Dimensions: 233 (W) x 25 (H) x 173 (D) mm
▪▪Operating Temperature Range: +32 °F to +113 °F
(0 °C to +45 °C)
▪▪Operating Humidity Range: 0 % to 90 %
HDMI
▪▪Video Output Resolution: 1080p, 1080i, 720p,
576p
▪▪Audio Output Format: PCM, Dolby Digital Plus
Input Connector Type
▪▪Female connector follow IEC 60169-2 [4] input
impedance 75 Ω
Optical Digital Audio
▪▪Terminal: TOS-Link Optical
▪▪Audio Output Format: PCM, Dolby Digital
▪▪Power Consumption
Power On: Max. 25 W
Power Off: 0.5 W
▪▪Power Rating: DC 14 V
/ 1.786 A
Network
▪▪Wired LAN: RJ-45 Ethernet Port x 1, 100M BASETX
Satellite
▪▪RF Input Tuning Range: 950 MHz to 2150 MHz
Input Signal Level: -25 dBm to -65 dBm
Symbol Rates: 1-45 MS/s
▪▪RF Demodulation: DVB-S QPSK, DVB-S2 QPSK &
8PSK
▪▪DiSEqC: Support DiSEqC 1.2
▪▪LNB Current: 500 mA
▪▪LNB Voltage Range: 13/18 V
Digital Audio/Video Output port
▪▪Audio/Video: 1 x HDMI 1.4
\\ Network speeds equal to or below 10 Mbps are not supported.
\\ Design and specifications are subject to change without prior notice.
\\ For the power supply and power consumption, refer to the label attached to the STB.
\\ Weight and dimensions are approximate.
66
Appendix  Licence
Licence
ENG
• HDMI Product Notice
-- The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
• Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
• DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks, service marks, or
certification marks of the Digital Living Network Alliance.
Network Service Disclaimer
All content and services accessible through this device belong to third parties and are protected by copyright,
patent, trademark and/or other intellectual property laws. Such content and services are provided solely for
your personal noncommercial use. You may not use any content or services in a manner that has not been
authorized by the content owner or service provider. Without limiting the foregoing, unless expressly authorized
by the applicable content owner or service provider, you may not modify, copy, republish, upload, post,
transmit, translate, sell, create derivative works, exploit, or distribute in any manner or medium any content or
services displayed through this device.
THIRD PARTY CONTENT AND SERVICES ARE PROVIDED "AS IS." SAMSUNG DOES NOT WARRANT CONTENT OR
SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY PURPOSE. SAMSUNG EXPRESSLY DISCLAIMS
ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. SAMSUNG DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS,
LEGALITY, OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND
UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN CONTRACT
OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ATTORNEY
FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN CONNECTION WITH, ANY INFORMATION
CONTAINED IN, OR AS A RESULT OF THE USE OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN
IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Third party services may be terminated or interrupted at any time, and Samsung makes no representation
or warranty that any content or service will remain available for any period of time. Content and services are
transmitted by third parties by means of networks and transmission facilities over which Samsung has no
control. Without limiting the generality of this disclaimer, Samsung expressly disclaims any responsibility or
liability for any interruption or suspension of any content or service made available through this device.
Samsung is neither responsible nor liable for customer service related to the content and services. Any question
or request for service relating to the content or services should be made directly to the respective content and
service providers.
67
Appendix  Allgemeine Geschäftsbedingungen HD+
Allgemeine Geschäftsbedingungen HD+
1. Geltungsbereich, Vertragsgegenstand und HD+ Karte
1.1Diese allgemeinen Geschäftsbedingungen der HD PLUS GmbH mit Sitz in der Betastraße 1-10,
85774 Unterföhring („HDP“) gelten ausschließlich für den HD+ Service.
1.2HDP überlässt dem Nutzer nach Maßgabe dieser allgemeinen Geschäftsbedingungen den Besitz an einem
Datenträger („HD+ Karte“). Die auf der HD+ Karte gespeicherte Software bzw. Daten (zusammen die „HD+
Software“) sind lediglich technische Voraussetzung zum entschlüsselten Empfang bestimmter, digital
verschlüsselt ausgestrahlter TV- Angebote („Programmangebote“) über einen Digitalempfänger mit
HD+ Zertifizierung („HD+ Service“).
1.3 HDP räumt dem Nutzer eine nicht ausschließliche, nicht übertragbare Lizenz zur bedingungsgemäßen
Nutzung der auf der HD+ Karte befindlichen HD+ Software zum Zwecke der vertragsgemäßen
Entschlüsselung von Programmangeboten ein. Dieses Recht ist auf das Gebiet der Bundesrepublik
Deutschland beschränkt. Es ist dem Nutzer untersagt, die HD+ Karte außerhalb Deutschlands zu nutzen.
HDP kann verlangen, dass die HD+ Karte ausschließlich in Verbindung mit einem ihr zugeordneten
Digitalempfänger verwendet wird. Außerdem ist HDP berechtigt, dies technisch sicherzustellen (sog.
Pairing von Digitalempfänger und HD+ Karte).
1.4 Die Aktivierung der HD+ Karte obliegt dem Nutzer. Die HD+ Karte darf nicht anders als vereinbart
verwendet werden. Der Nutzer ist nicht berechtigt, die HD+ Software zu kopieren, zu modifizieren, zu
disassemblieren, zu dekompilieren oder andere Verfahren auf sie anzuwenden, um deren Quellcode oder
deren Struktur zu erfahren oder Prozesse oder deren Zustandsrepräsentation unberechtigt in Erfahrung
zu bringen oder zu beeinflussen. Gesetzliche Dekompilierungsrechte bleiben unberührt.
1.5 Der Digitalempfänger, das Wiedergabegerät (z. B. TV) und die Programmangebote sind ausdrücklich
nicht Leistungsgegenstand. Zertifizierte Digitalempfänger sind im Handel erhältlich. Ihre Installation
obliegt dem Nutzer. Im Falle technischer oder allgemeiner Probleme mit dem Digitalempfänger liegt die
Verantwortung für den Kundenservice beim Hersteller des Digitalempfängers.
1.6Die Anzahl und Zusammenstellung der Programmangebote kann sich während der Vertragslaufzeit
ändern.
1.7HDP behält sich vor, die zur Nutzung des HD+ Services sowie zu dessen Ergänzung oder Änderung
erforderliche Software auf die HD+ Karte sowie den Digitalempfänger in unregelmäßigen Zeitabständen
kostenfrei aufzuspielen oder dort vorhandene HD+ Software zu aktualisieren, zu ergänzen oder zu ändern.
Unbeschadet der vorstehenden Regelungen ist die Haftung von HDP bei Datenverlusten auf den typischen
Wiederherstellungsaufwand beschränkt.
1.8HDP behält sich vor, HD+ Karten zu sperren bzw. nicht mehr zu unterstützen, die aufgrund von
Rechtsverletzungen auch durch Dritte die unerlaubte Nutzung des HD+ Services bzw. eine Umgehung der
Verschlüsselung ermöglichen. Eine Verlängerung des HD+ Services nach Ablauf der Freischaltung gemäß
Ziffer 3.1 ist auf gesperrten bzw. nicht mehr unterstützten HD+ Karten nicht möglich.
2. Nutzerkreis und Nutzungsvoraussetzungen
2.1Der HD+ Service steht natürlichen Personen im Alter von mindestens 18 Jahren zur Verfügung und ist
ausschließlich für die private, nicht-gewerbliche Nutzung bestimmt. Die Nutzung außerhalb des privaten
Haushalts bzw. die Weitergabe an Dritte zur Nutzung ist nicht gestattet.
2.2Voraussetzung für die Nutzung des HD+ Services ist eine digitaltaugliche Satellitenempfangsanlage,
welche auf einen von HDP genutzten Satelliten ausgerichtet ist bzw. vereinzelt auch Kabel-Empfang
(siehe www.hd-plus.de/faq) sowie die Verwendung eines mit dem HD+ Logo gekennzeichneten
Digitalempfängers und ein Wiedergabegerät (z. B. TV), die im Leistungsumfang jedoch nicht enthalten
sind (vgl. Ziffer 1.5).
68
Appendix  Allgemeine Geschäftsbedingungen HD+
3. Servicepauschale / Laufzeit und Verlängerung des HD+ Services
3.1 Im Rahmen von Vermarktungsangeboten, beispielsweise in Verbindung mit dem Kauf eines für HD+
zertifizierten Digitalempfängers, werden HD+ Karten ausgegeben, die bereits eine Freischaltung über
mehrere Monate für den HD+ Service ohne weitere Kosten für den Nutzer beinhalten.
3.2 Im Übrigen fällt für die Nutzung des HD+ Services eine Servicepauschale zu den jeweiligen besonderen
Bedingungen an.
3.3Die Laufzeit der Nutzung des HD+ Services beginnt mit Aktivierung der HD+ Karte. Aktiviert wird eine
Karte, wenn sie in den dafür vorgesehenen Schacht eines für HD+ zertifizierten Digitalempfängers steckt
und ein HD+ Programm damit erstmals entschlüsselt wird bzw. mit Verlängerung und Freischaltung durch
den Nutzer
3.4Rechtzeitig vor Ablauf der jeweiligen Freischaltung des HD+ Services wird der Nutzer durch eine
Einblendung auf dem Wiedergabegerät auf Ablauf und eventuell mögliche Verlängerungs- bzw.
Neukaufoptionen für die Nutzung des HD+ Services aufmerksam gemacht. Die Freischaltung einer HD+
Karte sollte erst nach Einblendung auf dem Wiedergabegerät verlängert werden. Andernfalls kann sich
der Zeitraum einer bestehenden Freischaltung verkürzen. Der Erwerb einer HD+ Karte beinhaltet jedoch
nicht den Anspruch auf Verlängerung derselben.
3.5Die Programmangebote und Services Dritter und deren Empfang bzw. Nutzung können gesonderte Kosten
auslösen, für die der Nutzer selbst verantwortlich ist.
4. Beachtung von Urheberrechten
4.1Die HD+ Software und die HD+ Karte sind rechtlich geschützt. Soweit Programme von Lizenzgebern zur
Anwendung kommen, ist deren Eigentum in gleichem Umfang geschützt. Die unerlaubte Vervielfältigung
oder Verbreitung der HD+ Software oder der HD+ Karte und/oder deren Nachahmung wird HDP durch
zivil-, gegebenenfalls auch strafrechtliche Maßnahmen verfolgen.
5. Rechte und Pflichten des Nutzers
5.1 Jeder Nutzer des HD+ Services trägt selbst die Verantwortung für die bestimmungsgemäße Nutzung;
der Nutzer hat insbesondere sicherzustellen, dass jugendgefährdende Sendeinhalte nur dem gesetzlich
zugelassenen Personenkreis zugänglich sind.
5.2Der Nutzer darf den HD+ Service nicht missbräuchlich nutzen und ist verpflichtet, seine HD+ Karte vor
Verlust und Missbrauch zu schützen. Der Nutzer darf insbesondere keine Eingriffe in die HD+ Software
vornehmen oder vornehmen lassen, um beispielsweise den unberechtigten Empfang von verschlüsselten
Programmangeboten zu ermöglichen. Auch die Benutzung von Vorrichtungen zur Umgehung der
Verschlüsselung ist verboten. Solche Missbräuche können zivil- und strafrechtlich verfolgt werden.
Auf Ziffer 6 und Ziffer 7.3wird verwiesen.
5.3Ersetzt HDP die HD+ Karte aufgrund einer vom Nutzer zu vertretenden Beschädigung oder eines Verlustes,
hat dieser Schadensersatz zu leisten.
5.4Wird die Bereitstellung des HD+ Services aufgrund von Eingriffen in die Software oder Hardware des
Nutzers beeinträchtigt oder unterbrochen, die HDP nicht zu vertreten hat, ist der Nutzer nicht zur
Rückerstattung einer bereits entrichteten Servicepauschale berechtigt. Dies gilt auch, wenn die HD+ Karte
beschädigt wurde oder abhanden gekommen ist.
69
ENG
2.3Eine uneingeschränkte, vollumfängliche Nutzung des HD+ Services ist nur bei der Verwendung von
HD+ zertifizierten Digitalempfängern möglich. Bei der Verwendung von Digitalempfängern ohne HD+
Zertifizierung kann es zu technischen Nutzungseinschränkungen des HD+ Services kommen, auch wenn
HD+ zertifizierte Common-Interface-+ Empfangsmodule verwendet werden. Insbesondere kann es sein,
dass die Entschlüsselung bzw. Darstellung einzelner Programmangebote nicht möglich ist. Der Nutzer hat
deswegen gegenüber HDP weder einen Gewährleistungsanspruch noch ein Sonderkündigungsrecht.
Appendix  Allgemeine Geschäftsbedingungen HD+
6. Freistellung
6.1Der Nutzer haftet gegenüber HDP für die Einhaltung der in den Ziffern 4 und 5 aufgeführten Pflichten.
Er stellt HDP von sämtlichen Ansprüchen Dritter frei, die infolge einer schuldhaften Verletzung dieser
Pflichten und/oder schädigender Handlungen des Nutzers gegen HDP geltend gemacht werden und leistet
Ersatz für darüber hinausgehende Schäden einschließlich der Kosten für eine eventuell erforderliche
Rechtsverfolgung und -verteidigung.
7. Rechte und Pflichten von HDP
7.1HDP wird den Nutzer von einer nicht nur unwesentlichen vorübergehenden Leistungseinstellung oder
-beschränkung unterrichten. Diese Mitteilungspflicht besteht nicht, wenn die Unterrichtung nach den
jeweiligen Umständen objektiv vor Beginn der Leistungseinstellung oder -beschränkung nicht möglich ist
oder die Beseitigung bereits eingetretener Unterbrechungen verzögern würde.
7.2HDP behält sich vor, ohne weitere Ankündigung Wartungs- und Instandhaltungsarbeiten an ihren
technischen Anlagen zur Aufrechterhaltung bzw. Verbesserung des HD+ Services durchzuführen.
In diesem Wartungsfenster kann es zu Unterbrechungen oder Beeinträchtigungen beim Empfang der
Programmangebote kommen, die den Nutzer jedoch nicht zur Minderung berechtigen.
7.3Bei einem Verstoß gegen diese Nutzungsbedingungen oder dem begründeten Verdacht eines Verstoßes
durch den Nutzer, insbesondere im Sinne der vorstehenden Ziffern 4 und 5, ist HDP nach eigenem
Ermessen berechtigt:
7.3.1den Nutzer vorübergehend oder dauerhaft von der Nutzung des HD+ Services auszuschließen und/oder
7.3.2das Nutzungsverhältnis außerordentlich gemäß Ziffer 10.1zu kündigen.
7.4 HDP wird den Nutzer vor Ausschluss oder Kündigung abmahnen, wenn nicht der Verstoß so schwer wiegt,
dass HDP eine Fortsetzung des Nutzungsverhältnisses nicht zumutbar ist.
7.5Bei einem auf dem Verschulden des Nutzers beruhenden Nutzungsausschluss gemäß Ziffer 7.3 bleibt der
Nutzer auch für den Zeitraum des Nutzungsausschlusses und der Leistungsunterbrechung zur Zahlung der
Vergütung verpflichtet.
8. Gewährleistung
8.1HDP erbringt Leistungen unter Inanspruchnahme von Kommunikationsnetzen oder technischen
Einrichtungen Dritter, die sich außerhalb der Kontrolle von HDP befinden. Zeitweilige Beschränkungen,
Beeinträchtigungen oder Ausfälle des HD+ Services aufgrund von Einflüssen, die HDP nicht zu vertreten
hat, kann HDP darum nicht ausschließen. HDP übernimmt insbesondere keine Gewähr dafür, dass
bestimmte Programmangebote zu einem bestimmten Zeitpunkt empfangen werden können; dies gilt
nicht, soweit HDP eine Störung zu vertreten hat.
8.2Der Nutzer erkennt an, dass die Qualität der entschlüsselten bzw. zugänglich gemachten
Programmangebote einerseits von der durch Dritte bereitgestellten Signalqualität und andererseits von
der Leistungsfähigkeit der vom Nutzer eingesetzten Wiedergabegeräte abhängig ist und beides außerhalb
des Verantwortungsbereiches der HDP liegt. Der Nutzer erkennt ebenfalls an, dass die Aufnahme und
Wiedergabe aufgezeichneter Programmangebote durch Dritte eingeschränkt werden kann.
8.3HDP weist darauf hin, dass Softwareprogramme nicht so entwickelt werden können, dass sie für alle
Anforderungen fehlerfrei laufen.
8.4HDP behebt im Rahmen der bestehenden technischen und betrieblichen Möglichkeiten alle ihr
gemeldeten Störungen des HD+ Services, für deren Behebung es nicht des Austauschs der HD+ Karte
bedarf, unverzüglich. Die Kosten für die Inanspruchnahme des Kundendienstes von HDP trägt der Nutzer.
Vorübergehende Beeinträchtigungen des Empfanges durch atmosphärische Störungen oder Sender-,
oder Satelliten-/Kabelnetzausfall berechtigen den Nutzer nicht zur Minderung.
70
Appendix  Allgemeine Geschäftsbedingungen HD+
10. Kündigung des Vertrages und Änderung des HD+ Services
10.1Der Vertrag über die Nutzung des HD+ Service läuft für die jeweils vereinbarte Dauer ab Aktivierung der
HD+ Karte Eine Verlängerung setzt voraus, dass die HD+ Karte nicht gem. Ziffer 1.8gesperrt ist. Unberührt
hiervon bleiben etwaige außerordentliche Kündigungsrechte.
10.2Der Nutzer kann nicht außerordentlich kündigen, weil sich die Anzahl oder Zusammenstellung der
Programmangebote, welche der Nutzer mithilfe der HD+ Software entschlüsseln kann, während der
Vertragslaufzeit ändert.
10.3Kündigt HDP den HD+ Service nach Abmahnung im Fall der Ziffer 7.3, kann HDP Schadensersatz nach den
gesetzlichen Vorschriften fordern.
11. Datenschutz
11.1Einzelheiten zur Datenverarbeitung sind im Datenschutzmerkblatt enthalten
(siehe www.hd-plus.de/datenschutz).
12. Schlussbestimmungen
12.1HDP ist berechtigt, ihre Rechte und Pflichten aus diesem Vertrag ganz oder teilweise auf einen zur
ordnungsgemäßen Fortführung des Vertrages geeigneten Dritten zu übertragen. Der Nutzer ist in diesem
Fall berechtigt, das Vertragsverhältnis mit Wirksamkeit zum Zeitpunkt der Übertragung zu kündigen.
12.2Es gilt das Recht der Bundesrepublik Deutschland. Die Anwendung von UN-Kaufrecht ist ausgeschlossen.
Stand: Juli 2014
71
ENG
9. Haftung
9.1HDP haftet nur, soweit HDP, ihren Erfüllungsgehilfen und/oder gesetzlichen Vertretern ein vorsätzliches
oder grob fahrlässiges Verhalten zur Last fällt.
9.2Bei leicht fahrlässig verursachten Schäden haftet HDP nur, wenn eine wesentliche Vertragspflicht verletzt
wurde oder ein Fall des Verzugs oder der Unmöglichkeit vorliegt. In diesen Fällen ist die Haftung auf den
typischen vorhersehbaren Schaden begrenzt.
9.3Soweit es zu zeitweiligen Beeinträchtigungen beim Empfang der Programmangebote kommen sollte, die
außerhalb des Einflussbereichs von HDP liegen, insbesondere bei einem Ausfall des Signals, den HDP nicht
zu vertreten hat, haftet HDP nicht.
9.4HDP ist nicht verantwortlich für die von ihr entschlüsselten zugänglich gemachten Programmangebote
und deren Inhalte.
9.5Eine gesetzlich vorgeschriebene, verschuldensunabhängige Haftung von HDP, insbesondere eine Haftung
nach Produkthaftungsgesetz sowie eine gesetzliche Garantiehaftung, bleibt von den vorstehenden
Haftungseinschränkungen unberührt. Gleiches gilt für die Haftung von HDP bei schuldhafter Verletzung
von Leben, Körper oder Gesundheit eines Nutzers. Die verschuldensunabhängige Haftung gemäß § 536a
BGB ist ausgeschlossen, wenn HDP dem Nutzer eine HD+ Karte überlässt.
9.6Die Ziffern 9.1, 9.2und 9.5 umfassen sämtliche vertraglichen und gesetzlichen Ansprüche, die wegen der
Nutzung des HD+ Services geltend gemacht werden können.
Appendix  Limited Warranty to Original Purchaser
Limited Warranty to Original Purchaser
Auf dieses Samsung-Produkt wird vom Hersteller eine vierundzwanzig-monatige Garantie gegen Material- und
Verarbeitungsfehler gegeben. Die Garantiezeit beginnt mit dem Kauf des Gerätes beim Fachhändler.Sollte es erforderlich
werden, Garantieleistungen in Anspruch zu nehmen, wenden Sie sich bitte an den Fachhändler, bei dem Sie das Gerät erworben
haben. Garantieleistungen können jedoch auch von Samsung-Vertragswerkstätten in anderen Ländern eingefordert werden;
dabei gelten die Garantiebedingungen des jeweiligen Landes. Bei Fragen zu unseren Vertragswerkstätten wenden Sie sich bitte
an fol-gende Adresse:
Samsung Electronics GmbH, Am Kronberger Hang 6,
65824 Schwalbach/Taunus
0180 6 SAMSUNG bzw.
0180 6 7267864*
(*0,20 €/Anruf aus dem dt. Festnetz, aus dem Mobilfunk max. 0,60 €/Anruf)
www.samsung.de
`` GARANTIEBEDINGUNGEN
1. Bei der Anmeldung von Garantieansprüchen muß der Kunde die vollständig und richtig ausgefüllte Garantiekarte sowie die
Originalrechnung oder den vom Händler ausgestellten Kassenbeleg oder eine entsprechende Bestätigung vorlegen. Die
Seriennummer am Gerät muß lesbar sein.
2. Es liegt im Ermessen von Samsung, ob die Garantie durch Reparatur oder durch Austausch des Geruates bzw des defekten
Teils erfüllt wird. Weitere Ansprüche sind ausgeschlossen.
3. Garantie-Reparaturen müssen von Samsung-Fachhändlern oder Samsung- Vertragswerkstätten ausgeführt werden. Bei
Reparaturen, die von anderen Händlern durchgeführt werden, besteht kein Anspruch auf Kostenerstattung, da so che
Reparaturen sowie Schäden, die dadurch am Gerät entstehen können, von dieser Garantie nicht abgedeckt werden.
4. Soll das Gerät in einem anderen als dem Land betrieben werden, für das es ursprünglich entwickelt und produziert
wurde, müssen eventuell Veränderungen am Gerät vorgenommen werden, um es an die technischen und/oder
sicherheitstechnischen Normen dieses anderen Landes anzupassen. Solche Veränderungen sind nicht auf Material oder
Verarbeitungsfehler des Gerätes zurückzuführen und werden von dieser Garantie nicht abgedeckt. Die Kosten für solche
Veränderungen sowie für dadurch am Gerät entstandene Schäden werden nicht erstattet.
5. Ausgenommen von der Garantieleistung sind:
a) Regelmäßige Inspektionen, Wartung und Reparatur oder Austausch von Teilen aufgrund normaler
Verschleißerscheinungen;
b) Transport- und Fahrtkosten sowie durch Auf- und Abbau des Gerätes entstandene Kosten;
c) Mißbrauch und zweckentfremdete Verwendung des Gerätes sowie falsche Installation;
d) Schäden, die durch Blitzschlag, Wasser, Feuer, höhere Gewalt, Krieg, falsche Netzspannung, unzureichende Belüftung
oder andere von Samsung nicht zu verantwortende Gründe entstanden sind.
Diese Garantie ist produktbezogen und kann innerhalb der Garantiezeit von jeder Person, die das Gerät legal erworben hat, in
Anspruch genommen werden.
6. Die Rechte des Käufers nach der jeweils geltenden nationalen Gesetzgebung, d.h. die aus dem Kaufvertrag abgeleiteten
Rechte des Käufers nach der jeweils geltenden nationalen Gesetzgebung, d.h. die aus dem Kaufvertrag abgeleiteten Rechte
des Käufers gegenüber dem Verkäufer wie auch andere Rechte, werden von dieser Garantie nicht angetastet. Soweit die
nationale Gesetzgebung nichts anderes vorsieht, beschränken sich die Ansprüche des Käufers auf die in dieser Garantie
genannten Punkte. Die Samsung Ltd. sowie deren Tochtergesellschaften und Händler haften nicht für den indirekten bzw.
in Folge auftretenden Verlust von Schallplatten, CDs, Video- und Audiokassetten oder anderem ähnlichen Material bzw.
Zusatzgeruaten.
• SAMSUNG does not warrant Remote Control related return due to customer's fault, such as Remote Control damage or
breakage due to customer's fault, or dead battery of remote control or Antenna or Signal related external problems, such as
broadcasting signal not available due to low signal power (not a problem of the Samsung box) and noise added signal from
exterior.
EUROPÄISCHE GARANTIEKARTE
72
Appendix  Open Source Announcement
Open Source Announcement
ENG
Some software components of this product incorporate source code covered under the GNU General Public
License (GPL), the GNU Lesser General Public License (LGPL) etc.
Acknowledgement:
The software included in this product contains copyrighted software that is licensed under the GPL/LGPL etc. You
may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of
this product by sending email to: oss.request@samsung.com
If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost
of physically performing source distribution may be charged.
You may also find a copy of the source at http://opensource.samsung.com/
This offer is valid to anyone in receipt of this information.
Below is the list of components covered under GNU General Public License, the GNU Lesser General Public
License etc.
Component
License
Component
License
Linux Kernel
GPL 2.0
GdkPixbuf
LGPL 2.1
Busybox
GPL 2.0
gtk
LGPL 2.1
Exiv2
GPL 2.0
libsoup
LGPL 2.1
multicom4
GPL 2.0
pango
LGPL 2.1
webkit
LGPL 2.1
JPEG
IJG License
FFmpeg
LGPL 2.1
cairo
MPL License
glib
LGPL 2.1
openssl
OpenSSL License
Glibc
LGPL 2.1
freetype
FreeType License
ATK
LGPL 2.1
JSStringRefBSTR
BSD License
GDK
LGPL 2.1
zlib
zlib/libpng License
taglib
LGPL 2.1
libpng
zlib/libpng License
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not
allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast,
the GNU General Public License is intended to guarantee your freedom to share and change free software--to
make sure the software is free for all its users. This General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to using it. (Some other Free Software
Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your
programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed
to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish),
that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new
free programs; and that you know you can do these things.
73
Appendix  Open Source Announcement
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to
surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the
software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee,
you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the
source code. And you must show them these terms so they know their rights.
We protect your rights with two steps:
(1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/
or modify the software. Also, for each author's protection and ours, we want to make certain that everyone
understands that there is no warranty for this free software.
If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the
original, so that any problems introduced by others will not reflect on the original authors' reputations.
Finally, any free program is threatened constantly by software patents.
We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect
making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for
everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying
it may be distributed under the terms of this General Public License. The “Program”, below, refers to any such
program or work, and a “work based on the Program” means either the Program or any derivative work under
copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications
and/or translated into another language. (Hereinafter, translation is included without limitation in the term
“modification”.) Each licensee is addressed as “you”.
Activities other than copying, distribution and modification are not covered by this License; they are outside its
scope. The act of running the Program is not restricted, and the output from the Program is covered only if its
contents constitute a work based on the Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium,
provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and
disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty;
and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee
for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a
fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the
Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that
you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date
of any change.
b)You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the
Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this
License.
c) If the modified program normally reads commands interactively when run, you must cause it, when started
running for such interactive use in the most ordinary way, to print or display an announcement including
an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a
warranty) and that users may redistribute the program under these conditions, and telling the user how to
view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an
announcement, your work based on the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole.
If identifiable sections of that work are not derived from the Program, and can be reasonably considered
independent and separate works in themselves, then this License, and its terms, do not apply to those sections
when you distribute them as separate works. But when you distribute the same sections as part of a whole
which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose
permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who
wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you;
rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the
Program.
74
Appendix  Open Source Announcement
3.
5.
6.
7.
8.
9.
75
ENG
4.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based
on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope
of this License.
You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form
under the terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed
under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
b)Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no
more than your cost of physically performing source distribution, a complete machine-readable copy of
the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This
alternative is allowed only for noncommercial distribution and only if you received the program in object code
or executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to it. For an
executable work, complete source code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to control compilation and installation of the
executable. However, as a special exception, the source code distributed need not include anything that is
normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of
the operating system on which the executable runs, unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then
offering equivalent access to copy the source code from the same place counts as distribution of the source
code, even though third parties are not compelled to copy the source along with the object code.
You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License.
Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically
terminate your rights under this License. However, parties who have received copies, or rights, from you under
this License will not have their licenses terminated so long as such parties remain in full compliance.
You are not required to accept this License, since you have not signed it. However, nothing else grants you
permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if
you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying,
distributing or modifying the Program or works based on it.
Each time you redistribute the Program (or any work based on the Program), the recipient automatically
receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and
conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties to this License.
If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the
conditions of this License, they do not excuse you from the conditions of this License.
If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent
obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license
would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly
through you, then the only way you could satisfy both it and this License would be to refrain entirely from
distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the
section is intended to apply and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to
contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free
software distribution system, which is implemented by public license practices. Many people have made generous
contributions to the wide range of software distributed through that system in reliance on consistent application
of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other
system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Program under this License may add an explicit
geographical distribution limitation excluding those countries, so that distribution is permitted only in or among
countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this
License.
The Free Software Foundation may publish revised and/or new versions of the General Public License from time
to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new
problems or concerns.
Appendix  Open Source Announcement
Each version is given a distinguishing version number. If the Program specifies a version number of this License
which applies to it and “any later version”, you have the option of following the terms and conditions either of that
version or of any later version published by the Free Software Foundation.
If the Program does not specify a version number of this License, you may choose any version ever published by
the Free Software Foundation.
10.If you wish to incorporate parts of the Program into other free programs whose distribution conditions are
different, write to the author to ask for permission. For software which is copyrighted by the Free Software
Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be
guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the
sharing and reuse of software generally.
NO WARRANTY
11.BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM,
TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF
ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY
AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU
ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS
PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM
(INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES
SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to
achieve this is to make it free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the start of each source file
to most effectively convey the exclusion of warranty; and each file should have at least the “copyright” line and a
pointer to where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify it under the terms of the GNU
General Public License as published by the Free Software Foundation; either version 2 of the License,
or(at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without
even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not,
write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO
WARRANTY; for details type ‘show w’.
This is free software, and you are welcome to redistribute it under certain conditions; type ‘show c’ for details.
The hypothetical commands ‘show w’ and ‘show c’ should show the appropriate parts of the General Public
License. Of course, the commands you use may be called something other than ‘show w’ and ‘show c’; they could
even be mouse-clicks or menu items--whatever suits your program.
76
Appendix  Open Source Announcement
You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright
disclaimer” for the program, if necessary. Here is a sample; alter the names:
ENG
Yoyodyne, Inc., hereby disclaims all copyright interest in the program ‘Gnomovision’ (which makes
passes at compilers) written by James Hacker.
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into proprietary programs.
If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with
the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not
allowed.
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public
License, version 2, hence the version number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the
GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make
sure the software is free for all its users.
This license, the Lesser General Public License, applies to some specially designated software packages--typically
libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we
suggest you first think carefully about whether this license or the ordinary General Public License is the better
strategy to use in any particular case, based on the explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are
designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if
you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces
of it in new free programs; and that you are informed that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to
surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the
library or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the
rights that we gave you. You must make sure that they, too, receive or can get the source code.
If you link other code with the library, you must provide complete object files to the recipients, so that they can
relink them with the library after making changes to the library and recompiling it. And you must show them these
terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which
gives you legal permission to copy, distribute and/or modify the library.
To protect each distributor, we want to make it very clear that there is no warranty for the free library.
Also, if the library is modified by someone else and passed on, the recipients should know that what they have
is not the original version, so that the original author's reputation will not be affected by problems that might be
introduced by others.
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that
a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent
holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the
full freedom of use specified in this license.
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License.
This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different
from the ordinary General Public License. We use this license for certain libraries in order to permit linking those
libraries into non-free programs.
When a program is linked with a library, whether statically or using a shared library, the combination of the two is
legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore
permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License
permits more lax criteria for linking other code with the library.
We call this license the “Lesser” General Public License because it does Less to protect the user's freedom than
the ordinary General Public License. It also provides other free software developers Less of an advantage over
competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for
many libraries. However, the Lesser license provides advantages in certain special circumstances.
77
Appendix  Open Source Announcement
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain
library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the
library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case,
there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License.
In other cases, permission to use a particular library in non-free programs enables a greater number of people to
use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables
many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.
Although the Lesser General Public License is Less protective of the users’ freedom, it does ensure that the user of
a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified
version of the Library.
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the
difference between a “work based on the library” and a “work that uses the library”. The former contains code
derived from the library, whereas the latter must be combined with the library in order to run.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other program which contains a notice placed by the
copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General
Public License (also called “this License”). Each licensee is addressed as “you”.
A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with
application programs (which use some of those functions and data) to form executables.
The “Library”, below, refers to any such software library or work which has been distributed under these terms.
A “work based on the Library” means either the Library or any derivative work under copyright law: that is to
say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated
straightforwardly into another language. (Hereinafter, translation is included without limitation in the term
“modification”.)
“Source code” for a work means the preferred form of the work for making modifications to it. For a library,
complete source code means all the source code for all modules it contains, plus any associated interface
definition files, plus the scripts used to control compilation and installation of the library.
Activities other than copying, distribution and modification are not covered by this License; they are outside
its scope. The act of running a program using the Library is not restricted, and output from such a program is
covered only if its contents constitute a work based on the Library (independent of the use of the Library in a
tool for writing it). Whether that is true depends on what the Library does and what the program that uses the
Library does.
1. You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any
medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright
notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any
warranty; and distribute a copy of this License along with the Library.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty
protection in exchange for a fee.
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library,
and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also
meet all of these conditions:
a) The modified work must itself be a software library.
b)You must cause the files modified to carry prominent notices stating that you changed the files and the date
of any change.
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this
License.
d)If a facility in the modified Library refers to a function or a table of data to be supplied by an application
program that uses the facility, other than as an argument passed when the facility is invoked, then you must
make a good faith effort to ensure that, in the event an application does not supply such function or table, the
facility still operates, and performs whatever part of its purpose remains meaningful. (For example, a function
in a library to compute square roots has a purpose that is entirely well-defined independent of the application.
Therefore, Subsection 2d requires that any application-supplied function or table used by this function must
be optional: if the application does not supply it, the square root function must still compute square roots.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived
from the Library, and can be reasonably considered independent and separate works in themselves, then this
License, and its terms, do not apply to those sections when you distribute them as separate works.
But when you distribute the same sections as part of a whole which is a work based on the Library, the
distribution of the whole must be on the terms of this License, whose permissions for other licensees extend
to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this
section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise
78
Appendix  Open Source Announcement
3.
5.
6.
79
ENG
4.
the right to control the distribution of derivative or collective works based on the Library. In addition, mere
aggregation of another work not based on the Library with the Library (or with a work based on the Library) on
a volume of a storage or distribution medium does not bring the other work under the scope of this License.
You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy
of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary
GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary
GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make
any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the
ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy.
This option is useful when you wish to copy part of the code of the Library into a program that is not a library.
You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or
executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete
corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2
above on a medium customarily used for software interchange.
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent
access to copy the source code from the same place satisfies the requirement to distribute the source code, even
though third parties are not compelled to copy the source along with the object code.
A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being
compiled or linked with it, is called a “work that uses the Library”. Such a work, in isolation, is not a derivative work
of the Library, and therefore falls outside the scope of this License.
However, linking a “work that uses the Library” with the Library creates an executable that is a derivative of the
Library (because it contains portions of the Library), rather than a “work that uses the library”.
The executable is therefore covered by this License. Section 6 states terms for distribution of such executables.
When a “work that uses the Library” uses material from a header file that is part of the Library, the object code
for the work may be a derivative work of the Library even though the source code is not. Whether this is true is
especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for
this to be true is not precisely defined by law.
If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and
small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether
it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under
Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms
of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly
with the Library itself.
As an exception to the Sections above, you may also combine or link a “work that uses the Library” with the Library
to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided
that the terms permit modification of the work for the customer’s own use and reverse engineering for debugging
such modifications.
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and
its use are covered by this License. You must supply a copy of this License. If the work during execution displays
copyright notices, you must include the copyright notice for the Library among them, as well as a reference
directing the user to the copy of this License. Also, you must do one of these things:
a) Accompany the work with the complete corresponding machine-readable source code for the Library
including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above);
and, if the work is an executable linked with the Library, with the complete machine-readable “work that uses
the Library”, as object code and/or source code, so that the user can modify the Library and then relink to
produce a modified executable containing the modified Library. (It is understood that the user who changes
the contents of definitions files in the Library will not necessarily be able to recompile the application to use the
modified definitions.)
b)Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses
at run time a copy of the library already present on the user’s computer system, rather than copying library
functions into the executable, and (2) will operate properly with a modified version of the library, if the user
installs one, as long as the modified version is interface-compatible with the version that the work was made
with.
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials
specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution.
d)If distribution of the work is made by offering access to copy from a designated place, offer equivalent access
to copy the above specified materials from the same place.
e) Verify that the user has already received a copy of these materials or that you have already sent this user a
copy. For an executable, the required form of the “work that uses the Library” must include any data and utility
programs needed for reproducing the executable from it. However, as a special exception, the materials to
be distributed need not include anything that is normally distributed (in either source or binary form) with the
major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless
that component itself accompanies the executable.
Appendix  Open Source Announcement
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not
normally accompany the operating system. Such a contradiction means you cannot use both them and the
Library together in an executable that you distribute.
7. You may place library facilities that are a work based on the Library side-by-side in a single library together with
other library facilities not covered by this License, and distribute such a combined library, provided that the separate
distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided
that you do these two things:
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any
other library facilities. This must be distributed under the terms of the Sections above.
b)Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and
explaining where to find the accompanying uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this
License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will
automatically terminate your rights under this License. However, parties who have received copies, or rights, from
you under this License will not have their licenses terminated so long as such parties remain in full compliance.
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you
permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you
do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library),
you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or
modifying the Library or works based on it.
10.Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a
license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and
conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You
are not responsible for enforcing compliance by third parties with this License.
11.If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited
to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict
the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute
so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a
consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free
redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you
could satisfy both it and this License would be to refrain entirely from distribution of the Library. If any portion of this
section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to
apply, and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to
contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free
software distribution system which is implemented by public license practices. Many people have made generous
contributions to the wide range of software distributed through that system in reliance on consistent application
of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other
system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is
believed to be a consequence of the rest of this License.
12.If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Library under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if written in the body of this License.
13.The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from
time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new
problems or concerns.
Each version is given a distinguishing version number. If the Library specifies a version number of this License
which applies to it and “any later version”, you have the option of following the terms and conditions either of that
version or of any later version published by the Free Software Foundation. If the Library does not specify a license
version number, you may choose any version ever published by the Free Software Foundation.
14.If you wish to incorporate parts of the Library into other free programs whose distribution conditions are
incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free
Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision
will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting
the sharing and reuse of software generally.
NO WARRANTY
15.BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE
EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
80
Appendix  Open Source Announcement
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries
If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making
it free software that everyone can redistribute and change. You can do so by permitting redistribution under these
terms (or, alternatively, under the terms of the ordinary General Public License).
To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source
file to most effectively convey the exclusion of warranty; and each file should have at least the “copyright” line and a
pointer to where the full notice is found.
one line to give the library’s name and an idea of what it does.
Copyright (C) year name of author
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser
General Public License as published by the Free Software Foundation; either version 2.1 of the License,
or (at your option) any later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even
the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public License along with this library; if not,
write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
Also add information on how to contact you by electronic and paper mail.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright
disclaimer” for the library, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library ‘Frob’ (a library for tweaking knobs)
written by James Random Hacker.
Signature of Ty Coon, 1 April 1990 Ty Coon, President of Vice
That’s all there is to it!
Mozilla Public License Version 1.1
1. Definitions.
1.0.1. "Commercial Use"
means distribution or otherwise making the Covered Code available to a third party.
1.1. "Contributor"
means each entity that creates or contributes to the creation of Modifications.
1.2. "Contributor Version"
means the combination of the Original Code, prior Modifications used by a Contributor, and the Modifications made
by that particular Contributor.
1.3. "Covered Code"
means the Original Code or Modifications or the combination of the Original Code and Modifications, in each case
including portions thereof.
81
ENG
HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY “AS IS” WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED
ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT
NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU
OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Appendix  Open Source Announcement
1.4. "Electronic Distribution Mechanism"
means a mechanism generally accepted in the software development community for the electronic transfer of data.
1.5. "Executable"
means Covered Code in any form other than Source Code.
1.6. "Initial Developer"
means the individual or entity identified as the Initial Developer in the Source Code notice required by Exhibit A.
1.7. "Larger Work"
means a work which combines Covered Code or portions thereof with code not governed by the terms of this
License.
1.8. "License"
means this document.
1.8.1. "Licensable"
means having the right to grant, to the maximum extent possible, whether at the time of the initial grant or
subsequently acquired, any and all of the rights conveyed herein.
1.9. "Modifications"
means any addition to or deletion from the substance or structure of either the Original Code or any previous
Modifications. When Covered Code is released as a series of files, a Modification is:
a. Any addition to or deletion from the contents of a file containing Original Code or previous Modifications.
b. Any new file that contains any part of the Original Code or previous Modifications.
1.10. "Original Code"
means Source Code of computer software code which is described in the Source Code notice required by Exhibit A
as Original Code, and which, at the time of its release under this License is not already Covered Code governed by
this License.
1.10.1. "Patent Claims"
means any patent claim(s), now owned or hereafter acquired, including without limitation, method, process, and
apparatus claims, in any patent Licensable by grantor.
1.11. "Source Code"
means the preferred form of the Covered Code for making modifications to it, including all modules it contains,
plus any associated interface definition files, scripts used to control compilation and installation of an Executable,
or source code differential comparisons against either the Original Code or another well known, available Covered
Code of the Contributor's choice. The Source Code can be in a compressed or archival form, provided the
appropriate decompression or de-archiving software is widely available for no charge.
1.12. "You" (or "Your")
means an individual or a legal entity exercising rights under, and complying with all of the terms of, this License or a
future version of this License issued under Section 6.1. For legal entities, "You" includes any entity which controls,
is controlled by, or is under common control with You. For purposes of this definition, "control" means (a) the power,
direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (b)
ownership of more than fifty percent (50%) of the outstanding shares or beneficial ownership of such entity.
2. Source Code License.
2.1. The Initial Developer Grant.
The Initial Developer hereby grants You a world-wide, royalty-free, non-exclusive license, subject to third party
intellectual property claims:
a. under intellectual property rights (other than patent or trademark) Licensable by Initial Developer to use,
reproduce, modify, display, perform, sublicense and distribute the Original Code (or portions thereof) with or
without Modifications, and/or as part of a Larger Work; and
b. under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use,
practice, sell, and offer for sale, and/or otherwise dispose of the Original Code (or portions thereof).
c. the licenses granted in this Section 2.1 (a) and (b) are effective on the date Initial Developer first distributes
Original Code under the terms of this License.
d. Notwithstanding Section 2.1 (b) above, no patent license is granted: 1) for code that You delete from the Original
Code; 2) separate from the Original Code; or 3) for infringements caused by: i) the modification of the Original
Code or ii) the combination of the Original Code with other software or devices.
2.2. Contributor Grant.
Subject to third party intellectual property claims, each Contributor hereby grants You a world-wide, royalty-free,
non-exclusive license
a. under intellectual property rights (other than patent or trademark) Licensable by Contributor, to use, reproduce,
modify, display, perform, sublicense and distribute the Modifications created by such Contributor (or portions
thereof) either on an unmodified basis, with other Modifications, as Covered Code and/or as part of a Larger
82
Appendix  Open Source Announcement
3. Distribution Obligations.
3.1. Application of License.
The Modifications which You create or to which You contribute are governed by the terms of this License, including
without limitation Section 2.2. The Source Code version of Covered Code may be distributed only under the terms
of this License or a future version of this License released under Section 6.1, and You must include a copy of this
License with every copy of the Source Code You distribute. You may not offer or impose any terms on any Source
Code version that alters or restricts the applicable version of this License or the recipients' rights hereunder.
However, You may include an additional document offering the additional rights described in Section 3.5.
3.2. Availability of Source Code.
Any Modification which You create or to which You contribute must be made available in Source Code form
under the terms of this License either on the same media as an Executable version or via an accepted Electronic
Distribution Mechanism to anyone to whom you made an Executable version available; and if made available via
Electronic Distribution Mechanism, must remain available for at least twelve (12) months after the date it initially
became available, or at least six (6) months after a subsequent version of that particular Modification has been
made available to such recipients. You are responsible for ensuring that the Source Code version remains available
even if the Electronic Distribution Mechanism is maintained by a third party.
3.3. Description of Modifications.
You must cause all Covered Code to which You contribute to contain a file documenting the changes You made
to create that Covered Code and the date of any change. You must include a prominent statement that the
Modification is derived, directly or indirectly, from Original Code provided by the Initial Developer and including
the name of the Initial Developer in (a) the Source Code, and (b) in any notice in an Executable version or related
documentation in which You describe the origin or ownership of the Covered Code.
3.4. Intellectual Property Matters
(a) Third Party Claims
If Contributor has knowledge that a license under a third party's intellectual property rights is required to exercise
the rights granted by such Contributor under Sections 2.1 or 2.2, Contributor must include a text file with the
Source Code distribution titled "LEGAL" which describes the claim and the party making the claim in sufficient
detail that a recipient will know whom to contact. If Contributor obtains such knowledge after the Modification
is made available as described in Section 3.2, Contributor shall promptly modify the LEGAL file in all copies
Contributor makes available thereafter and shall take other steps (such as notifying appropriate mailing lists or
newsgroups) reasonably calculated to inform those who received the Covered Code that new knowledge has been
obtained.
(b) Contributor APIs
If Contributor's Modifications include an application programming interface and Contributor has knowledge
of patent licenses which are reasonably necessary to implement that API, Contributor must also include this
information in the legal file.
(c) Representations.
Contributor represents that, except as disclosed pursuant to Section 3.4 (a) above, Contributor believes that
Contributor's Modifications are Contributor's original creation(s) and/or Contributor has sufficient rights to grant the
rights conveyed by this License.
3.5. Required Notices.
You must duplicate the notice in Exhibit A in each file of the Source Code. If it is not possible to put such notice in a
particular Source Code file due to its structure, then You must include such notice in a location (such as a relevant
directory) where a user would be likely to look for such a notice. If You created one or more Modification(s) You may
add your name as a Contributor to the notice described in Exhibit A. You must also duplicate this License in any
83
ENG
Work; and
b. under Patent Claims infringed by the making, using, or selling of Modifications made by that Contributor either
alone and/or in combination with its Contributor Version (or portions of such combination), to make, use, sell,
offer for sale, have made, and/or otherwise dispose of: 1) Modifications made by that Contributor (or portions
thereof); and 2) the combination of Modifications made by that Contributor with its Contributor Version (or
portions of such combination).
c. the licenses granted in Sections 2.2 (a) and 2.2 (b) are effective on the date Contributor first makes Commercial
Use of the Covered Code.
d. Notwithstanding Section 2.2 (b) above, no patent license is granted: 1) for any code that Contributor has deleted
from the Contributor Version; 2) separate from the Contributor Version; 3) for infringements caused by: i) third
party modifications of Contributor Version or ii) the combination of Modifications made by that Contributor with
other software (except as part of the Contributor Version) or other devices; or 4) under Patent Claims infringed by
Covered Code in the absence of Modifications made by that Contributor.
Appendix  Open Source Announcement
documentation for the Source Code where You describe recipients' rights or ownership rights relating to Covered
Code. You may choose to offer, and to charge a fee for, warranty, support, indemnity or liability obligations to one
or more recipients of Covered Code. However, You may do so only on Your own behalf, and not on behalf of the
Initial Developer or any Contributor. You must make it absolutely clear than any such warranty, support, indemnity
or liability obligation is offered by You alone, and You hereby agree to indemnify the Initial Developer and every
Contributor for any liability incurred by the Initial Developer or such Contributor as a result of warranty, support,
indemnity or liability terms You offer.
3.6. Distribution of Executable Versions.
You may distribute Covered Code in Executable form only if the requirements of Sections 3.1, 3.2, 3.3, 3.4 and
3.5 have been met for that Covered Code, and if You include a notice stating that the Source Code version of the
Covered Code is available under the terms of this License, including a description of how and where You have
fulfilled the obligations of Section 3.2. The notice must be conspicuously included in any notice in an Executable
version, related documentation or collateral in which You describe recipients' rights relating to the Covered Code.
You may distribute the Executable version of Covered Code or ownership rights under a license of Your choice,
which may contain terms different from this License, provided that You are in compliance with the terms of this
License and that the license for the Executable version does not attempt to limit or alter the recipient's rights in
the Source Code version from the rights set forth in this License. If You distribute the Executable version under a
different license You must make it absolutely clear that any terms which differ from this License are offered by You
alone, not by the Initial Developer or any Contributor. You hereby agree to indemnify the Initial Developer and every
Contributor for any liability incurred by the Initial Developer or such Contributor as a result of any such terms You
offer.
3.7. Larger Works.
You may create a Larger Work by combining Covered Code with other code not governed by the terms of this
License and distribute the Larger Work as a single product. In such a case, You must make sure the requirements of
this License are fulfilled for the Covered Code.
4. Inability to Comply Due to Statute or Regulation.
If it is impossible for You to comply with any of the terms of this License with respect to some or all of the Covered
Code due to statute, judicial order, or regulation then You must: (a) comply with the terms of this License to the
maximum extent possible; and (b) describe the limitations and the code they affect. Such description must be
included in the legal file described in Section 3.4 and must be included with all distributions of the Source Code.
Except to the extent prohibited by statute or regulation, such description must be sufficiently detailed for a recipient
of ordinary skill to be able to understand it.
5. Application of this License.
This License applies to code to which the Initial Developer has attached the notice in Exhibit A and to related
Covered Code.
6. Versions of the License.
6.1. New Versions
Netscape Communications Corporation ("Netscape") may publish revised and/or new versions of the License from
time to time. Each version will be given a distinguishing version number.
6.2. Effect of New Versions
Once Covered Code has been published under a particular version of the License, You may always continue to
use it under the terms of that version. You may also choose to use such Covered Code under the terms of any
subsequent version of the License published by Netscape. No one other than Netscape has the right to modify the
terms applicable to Covered Code created under this License.
6.3. Derivative Works
If You create or use a modified version of this License (which you may only do in order to apply it to code which
is not already Covered Code governed by this License), You must (a) rename Your license so that the phrases
"Mozilla", "MOZILLAPL", "MOZPL", "Netscape", "MPL", "NPL" or any confusingly similar phrase do not appear
in your license (except to note that your license differs from this License) and (b) otherwise make it clear that Your
version of the license contains terms which differ from the Mozilla Public License and Netscape Public License.
(Filling in the name of the Initial Developer, Original Code or Contributor in the notice described in Exhibit A shall not
of themselves be deemed to be modifications of this License.)
7. Disclaimer of warranty
Covered code is provided under this license on an "as is" basis, without warranty of any kind, either expressed
or implied, including, without limitation, warranties that the covered code is free of defects, merchantable, fit for a
84
Appendix  Open Source Announcement
particular purpose or non-infringing. The entire risk as to the quality and performance of the covered code is with
you. Should any covered code prove defective in any respect, you (not the initial developer or any other contributor)
assume the cost of any necessary servicing, repair or correction. This disclaimer of warranty constitutes an
essential part of this license. No use of any covered code is authorized hereunder except under this disclaimer.
8.2. If You initiate litigation by asserting a patent infringement claim (excluding declatory judgment actions) against
Initial Developer or a Contributor (the Initial Developer or Contributor against whom You file such action is referred
to as "Participant") alleging that:
a. such Participant's Contributor Version directly or indirectly infringes any patent, then any and all rights granted by
such Participant to You under Sections 2.1 and/or 2.2 of this License shall, upon 60 days notice from Participant
terminate prospectively, unless if within 60 days after receipt of notice You either: (i) agree in writing to pay
Participant a mutually agreeable reasonable royalty for Your past and future use of Modifications made by such
Participant, or (ii) withdraw Your litigation claim with respect to the Contributor Version against such Participant. If
within 60 days of notice, a reasonable royalty and payment arrangement are not mutually agreed upon in writing
by the parties or the litigation claim is not withdrawn, the rights granted by Participant to You under Sections 2.1
and/or 2.2 automatically terminate at the expiration of the 60 day notice period specified above.
b. any software, hardware, or device, other than such Participant's Contributor Version, directly or indirectly
infringes any patent, then any rights granted to You by such Participant under Sections 2.1(b) and 2.2(b) are
revoked effective as of the date You first made, used, sold, distributed, or had made, Modifications made by that
Participant.
8.3. If You assert a patent infringement claim against Participant alleging that such Participant's Contributor Version
directly or indirectly infringes any patent where such claim is resolved (such as by license or settlement) prior to
the initiation of patent infringement litigation, then the reasonable value of the licenses granted by such Participant
under Sections 2.1 or 2.2 shall be taken into account in determining the amount or value of any payment or license.
8.4. In the event of termination under Sections 8.1 or 8.2 above, all end user license agreements (excluding
distributors and resellers) which have been validly granted by You or any distributor hereunder prior to termination
shall survive termination.
9. Limitation of liability
Under no circumstances and under no legal theory, whether tort (including negligence), contract, or otherwise, shall
you, the initial developer, any other contributor, or any distributor of covered code, or any supplier of any of such
parties, be liable to any person for any indirect, special, incidental, or consequential damages of any character
including, without limitation, damages for loss of goodwill, work stoppage, computer failure or malfunction, or any
and all other commercial damages or losses, even if such party shall have been informed of the possibility of such
damages. This limitation of liability shall not apply to liability for death or personal injury resulting from such party's
negligence to the extent applicable law prohibits such limitation. Some jurisdictions do not allow the exclusion or
limitation of incidental or consequential damages, so this exclusion and limitation may not apply to you.
10. U.S. government end users
The Covered Code is a "commercial item," as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of
"commercial computer software" and "commercial computer software documentation," as such terms are used in
48 C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June
1995), all U.S. Government End Users acquire Covered Code with only those rights set forth herein.
11. Miscellaneous
This License represents the complete agreement concerning subject matter hereof. If any provision of this License
is held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable.
This License shall be governed by California law provisions (except to the extent applicable law, if any, provides
otherwise), excluding its conflict-of-law provisions. With respect to disputes in which at least one party is a citizen
of, or an entity chartered or registered to do business in the United States of America, any litigation relating to this
License shall be subject to the jurisdiction of the Federal Courts of the Northern District of California, with venue
lying in Santa Clara County, California, with the losing party responsible for costs, including without limitation, court
costs and reasonable attorneys' fees and expenses. The application of the United Nations Convention on Contracts
for the International Sale of Goods is expressly excluded. Any law or regulation which provides that the language of
85
ENG
8. Termination
8.1. This License and the rights granted hereunder will terminate automatically if You fail to comply with terms
herein and fail to cure such breach within 30 days of becoming aware of the breach. All sublicenses to the Covered
Code which are properly granted shall survive any termination of this License. Provisions which, by their nature,
must remain in effect beyond the termination of this License shall survive.
Appendix  Open Source Announcement
a contract shall be construed against the drafter shall not apply to this License.
12. Responsibility for claims
As between Initial Developer and the Contributors, each party is responsible for claims and damages arising,
directly or indirectly, out of its utilization of rights under this License and You agree to work with Initial Developer and
Contributors to distribute such responsibility on an equitable basis. Nothing herein is intended or shall be deemed
to constitute any admission of liability.
13. Multiple-licensed code
Initial Developer may designate portions of the Covered Code as "Multiple-Licensed". "Multiple-Licensed" means
that the Initial Developer permits you to utilize portions of the Covered Code under Your choice of the MPL or the
alternative licenses, if any, specified by the Initial Developer in the file described in Exhibit A.
Exhibit A - Mozilla Public License.
"The contents of this file are subject to the Mozilla Public License Version 1.1 (the "License"); you may not use this
file except in compliance with the License. You may obtain a copy of the License at http://www.mozilla.org/MPL/
Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND,
either express or implied. See the License for the specific language governing rights and limitations under the
License.
OpenSSL License
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original
SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style
Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core@openssl.org.
OpenSSL License
Copyright (c) 1998-2007 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that
the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following
acknowledgment: "This product includes software developed by the OpenSSL Project for use in the
OpenSSL Toolkit. (http://www.openssl.org/)"
4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products
derived from this software without prior written permission. For written permission, please contact
openssl-core@openssl.org.
5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their
names without prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes
software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)"
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY EXPRESSED OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL
PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
86
Appendix  Open Source Announcement
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product
includes software written by Tim Hudson (tjh@cryptsoft.com).
Original SSLeay License
Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.
This library is free for commercial and non-commercial use as long as the following conditions are aheared
to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc.,
code; not just the SSL code. The SSL documentation included with this distribution is covered by the same
copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com).
Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If
this package is used in a product, Eric Young should be given attribution as the author of the parts of the
library used. This can be in the form of a textual message at program startup or in documentation (online or
textual) provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that
the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following
disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following
acknowledgement:
"This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)"
The word 'cryptographic' can be left out if the rouines from the library being used are not cryptographic
related :-).
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application
code) you must include an acknowledgement: "This product includes software written by Tim Hudson
(tjh@cryptsoft.com)"
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publically available version or derivative of this code cannot be
changed. i.e. this code cannot simply be copied and put under another distribution licence [including the
GNU Public Licence.]
The FreeType Project LICENSE
2006-Jan-27 Copyright 1996-2002, 2006 by David Turner, Robert Wilhelm, and Werner Lemberg
Introduction
The FreeType Project is distributed in several archive packages; some of them may contain, in addition to
the FreeType font engine, various tools and contributions which rely on, or relate to, the FreeType Project.
This license applies to all files found in such packages, and which do not fall under their own explicit
license. The license affects thus the FreeType font engine, the test programs, documentation and
makefiles, at the very least.
This license was inspired by the BSD, Artistic, and IJG (Independent JPEG Group) licenses, which all
encourage inclusion and use of free software in commercial and freeware products alike. As a consequence,
its main points are that:
87
ENG
This package is an SSL implementation written by Eric Young (eay@cryptsoft.com).
The implementation was written so as to conform with Netscapes SSL.
Appendix  Open Source Announcement
o We don't promise that this software works. However, we will be interested in any kind of bug reports.
(`as is' distribution)
o You can use this software for whatever you want, in parts or full form, without having to pay us.
(`royalty-free' usage)
o You may not pretend that you wrote this software. If you use it, or only parts of it, in a program, you
must acknowledge somewhere in your documentation that you have used the FreeType code. (`credits')
We specifically permit and encourage the inclusion of this software, with or without modifications, in
commercial products. We disclaim all warranties covering The FreeType Project and assume no liability
related to The FreeType Project.
Finally, many people asked us for a preferred form for a credit/disclaimer to use in compliance with this
license. We thus encourage you to use the following text:
"""
Portions of this software are copyright ?<year> The FreeType
Project (www.freetype.org). All rights reserved.
"""
Please replace <year> with the value from the FreeType version you actually use.
Legal Terms
0. Definitions
Throughout this license, the terms `package', `FreeType Project', and `FreeType archive' refer to the set
of files originally distributed by the authors (David Turner, Robert Wilhelm, and Werner Lemberg) as the
`FreeType Project', be they named as alpha, beta or final release.
`You' refers to the licensee, or person using the project, where `using' is a generic term including compiling
the project's source code as well as linking it to form a `program' or `executable'. This program is referred to
as `a program using the FreeType engine'.
This license applies to all files distributed in the original FreeType Project, including all source code,
binaries and documentation, unless otherwise stated in the file in its original, unmodified form as distributed
in the original archive. If you are unsure whether or not a particular file is covered by this license, you must
contact us to verify this.
The FreeType Project is copyright (C) 1996-2000 by David Turner, Robert Wilhelm, and Werner Lemberg. All
rights reserved except as specified below.
1. No Warranty
THE FREETYPE PROJECT IS PROVIDED `AS IS' WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. IN NO EVENT WILL ANY OF THE AUTHORS OR COPYRIGHT HOLDERS
BE LIABLE FOR ANY DAMAGES CAUSED BY THE USE OR THE INABILITY TO USE, OF THE FREETYPE
PROJECT.
2. Redistribution
This license grants a worldwide, royalty-free, perpetual and irrevocable right and license to use, execute,
perform, compile, display, copy, create derivative works of, distribute and sublicense the FreeType Project
(in both source and object code forms) and derivative works thereof for any purpose; and to authorize
others to exercise some or all of the rights granted herein, subject to the following conditions:
o Redistribution of source code must retain this license file (`FTL.TXT') unaltered; any additions, deletions
or changes to the original files must be clearly indicated in accompanying
documentation. The
copyright notices of the unaltered, original files must be preserved in all copies of source files.
o Redistribution in binary form must provide a disclaimer that states that the software is based in part
of the work of the FreeType Team, in the distribution documentation. We also encourage you to put an
URL to the FreeType web page in your documentation, though this isn't mandatory.
These conditions apply to any software derived from or based on the FreeType Project, not just the
unmodified files. If you use our work, you must acknowledge us. However, no fee need be paid to us.
88
Appendix  Open Source Announcement
3. Advertising
Neither the FreeType authors and contributors nor you shall use the name of the other for commercial,
advertising, or promotional purposes without specific prior written permission.
As you have not signed this license, you are not required to accept it. However, as the FreeType Project
is copyrighted material, only this license, or another one contracted with the authors, grants you the right
to use, distribute, and modify it. Therefore, by using, distributing, or modifying the FreeType Project, you
indicate that you understand and accept all the terms of this license.
4. Contacts
There are two mailing lists related to FreeType:
o freetype@nongnu.org
Discusses general use and applications of FreeType, as well as future and wanted additions to the
library and distribution. If you are looking for support, start in this list if you haven't found anything to
help you in the documentation.
o freetype-devel@nongnu.org
Discusses bugs, as well as engine internals, design issues, specific licenses, porting, etc.
Our home page can be found at
http://www.freetype.org
BSD License
Copyright (C) 2007 Apple Inc.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that
the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
* Neither the name of the <organization> nor the names of its contributors may be used to endorse or
promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
89
ENG
We suggest, but do not require, that you use one or more of the following phrases to refer to this software
in your documentation or advertising materials: `FreeType Project', `FreeType Engine', `FreeType library', or
`FreeType Distribution'.
Memo
Memo
Download PDF