Samsung | LE19R86WD | Samsung 19'' LCD-TV LE19R86WD Benutzerhandbuch

LCD TV
LE19R8
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Country
REPUBLIC OF IRELAND
U.K
Customer Care Centre
0818 717 100
0870-SAMSUNG(726-7864)
Web Site
www.samsung.com/ie
www.samsung.com/uk
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT
BN68-01169L-00
BN68-01169L-00Eng-Cover.indd 1
Register your product at www.samsung.com/global/register
Record your Model and Serial number here for future reference.
▪ Model _______________ ▪ Serial No. _______________
2007-08-17 �� 9:13:54
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
WARNINGS:
Image retention, commonly known as screen burn-in, can occur on most types of television if the same
image is displayed continuously. The most common causes of image retention are logos that remain
stationary on the TV screen. These logos are common on many programmes received via a Setop Box.
To reduce this risk, avoid displaying still images for long durations and lower the brightness or contrast
settings to decrease the intensity of the picture. Extended viewing of movies and programs in aspect
ratios that are different from the aspect ratio of the TV may cause image retention. Always endeavour
to avoid black borders top or bottom by using the zoom function. This will help eliminate the black
borders and fit the picture to the entire area of the screen. Using a video game console may cause
image retention and is not recommended. When using a PC input, avoid displaying still images for long
durations and reduce the brightness or contrast settings to decrease the intensity of the picture.
IMPORTANT:
Image retention issues are not covered by your Samsung® warranty.
• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image
retention. This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen when
displaying a still image.
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders
•
displayed on the left, right and center of the screen caused by the difference of light
emission on the screen. Playing a DVD or a game console may cause a similar effect to the
screen. Damages caused by the above effect are not covered by the Warranty.
•Displaying still images from Video games and PC for longer than a certain period of time may produce
partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still
images.
© 2007 Samsung Electronics Co., Ltd. All rights reserved.
BN68-01169L-00Eng-0731.indd 1
2007-08-17 �� 3:38:25
English
Contents
Connecting and Preparing Your TV








List of Parts........................................................ 3
Viewing the Control Panel................................. 4
Viewing the Connection Panel........................... 5
Viewing the Remote Control.............................. 7
Installing Batteries in the Remote Control......... 8
Switching On and Off......................................... 8
Placing Your Television in Standby Mode.......... 8
Plug & Play........................................................ 9
Setting the Channels







Storing Channels Automatically....................... 10
Storing Channels Manually...............................11
Setting the Channel Lists................................. 12
Activating the Child Lock................................. 12
Sorting the Stored Channels............................ 13
Assigning Channels Names............................. 13
Fine Tuning Channel Reception...................... 14
Changing the Sound Standard........................ 22
Adjusting the Sound Settings........................... 23
Setting the TruSurround XT (SRS TS XT)....... 23
Connecting Headphones................................. 24
Selecting the Sound Mode............................... 24
Adjusting the Volume Automatically................. 24
Selecting the Internal Mute.............................. 25
Listening to the Sound of the Sub Picture....... 25
Resetting the Sound Settings to the Factory
Defaults............................................................ 26
Setting the Time



Setting and Displaying the Current Time......... 26
Setting the Sleep Timer................................... 27
Switching the Television On and Off
Automatically................................................... 27
Function Description
Setting the Picture












Setting the Sound









Changing the Picture Standard........................ 15
Adjusting the Custom Picture.......................... 15
Changing the Colour Tone............................... 16
Activating Backlight.......................................... 16
Configuring Detailed Settings on the
Picture.............................................................. 17
Changing the Picture Size............................... 18
Freezing the Current Picture............................ 19
Selecting the Screen Mode.............................. 19
Resetting the Picture Settings to the
Factory Defaults............................................... 19
Digital NR / Active Colour / DNIe .................... 20
Viewing the Picture In Picture (PIP)................. 21
HDMI Black Level............................................ 22






Choosing Your Language................................ 28
Using Game Mode........................................... 28
Blue Screen / Melody / Energy Saving............ 29
Setting the Light Effect..................................... 29
Selecting the Source........................................ 30
Editing the Input Source Names...................... 30
English - 1
BN68-01169L-00Eng-0731.indd 1
2007-08-17 �� 3:38:25
USING The DTV FeATuRe

























Using the Teletext Feature
Previewing the DTV Menu System.................. 31
Updating the Channel List Automatically......... 32
Updating the Channel List Manually................ 32
Editing Your Favourite Channels..................... 33
Selecting Channel List..................................... 35
Displaying Programme Information................. 35
Viewing the EPG (Electronic Programme
Guide) Information........................................... 36
Using the Scheduled List................................. 37
Setting the Default Guide................................. 37
Viewing All Channels and Favourite
Channels.......................................................... 38
Adjusting the Menu Transparency................... 38
Setting up the Parental Lock............................ 39
Setting the Subtitle........................................... 40
Setting the Subtitle Mode................................. 40
Selecting the Audio Format.............................. 40
Selecting the Digital Text ................................ 41
Selecting the Time Zone (Spain only).............. 41
Viewing Product Information............................ 41
Checking the Signal Information...................... 42
Upgrading the Software................................... 42
Viewing Common Interface.............................. 43
Selecting the CI (Common Interface) Menu.... 43
Resetting.......................................................... 44
Selecting the Preferred Language
(Subtitle, Audio or Teletext).............................. 44
Preference....................................................... 45
Symbol
Press
 Teletext Feature............................................... 46
 Setting Up Your Remote Control...................... 47
 Remote Control Codes.................................... 48
Setting the PC




Setting up Your PC Software
(Based on Windows XP).................................. 51
Display Modes................................................. 51
Setting the PC.................................................. 52
Setting the Home Theatre PC.......................... 53
Recommendations For Use











Important
How to Adjust the Stand.................................. 53
How to Adjust the Angle of the TV................... 53
Installing the Wall Mount Kit............................. 54
Installing VESA compliant mounting devices... 54
Using the Decoration Covers........................... 54
Using the Anti-Theft Kensington Lock.............. 55
Troubleshooting: Before Contacting
Service Personnel............................................ 55
Technical and Environmental Specifications .. 56
Warning! Important Safety Instructions
Wiring the Mains Power Supply Plug (UK Only)
Warranty Card
Note
One-Touch
Button
English - 2
BN68-01169L-00Eng-0731.indd 2
2007-08-17 �� 3:38:25
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
Remote Control &
Batteries
(AAA x 2)
Registration Card
(Not available in all locations)
Power Cord
Wall Mount kit
Decoration Cover
Owner’s Instructions
Cleaning Cloth
The stand and stand screw may not be included depending on the model.
English - BN68-01169L-00Eng-0731.indd 3
2007-08-17 �� 3:38:26
Viewing the Control Panel
Front Panel buttons
Touch the each button to operate.
The product colour and shape may vary depending on the model.
1 SOURCE
Toggles between all the available input
sources (TV, Ext., AV, S-Video, Component,
PC, HDMI, DTV). In the on-screen menu, use
this button as you use the ENTER/OK button
on the remote control.
4
Press to change channels.
In the on-screen menu, use the
buttons as you use the ▲ and ▼ buttons on the remote control.
(Without the Remote Control, you can turn on the TV by using the Channel buttons.)
MENU
Press to see an on-screen menu of your TV’s 5 (Power)
features.
Press to turn the TV on and off.
In case of DTV mode, the DTV menu appears. Power Indicator
Blinks and turns off when the power is on and
3
lights up in stand-by mode.
Press to decrease or increase the volume.
In the on-screen menu, use the
6 Remote Control Sensor
buttons as you use the ◄ and ► buttons on Aim the remote control towards this spot on the remote control.
the TV.
2
7 Speakers
English - BN68-01169L-00Eng-0731.indd 4
2007-08-17 �� 3:38:26
Viewing the Connection Panel
1
4
3
2
[Side Panel Jacks]
5
DVI IN
AUDIO
PC IN
AUDIO
HDMI/DVI IN
PC
6
EX-LINK
AUDIO
VIDEO
AV IN
S-VIDEO
Power Input
!
0
98
7
The product colour and shape may vary depending on the model.
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
1Connecting Set-Top Box, VCR or DVD
Connector
Input
EXT
Video
o
Audio (L/R)
o
RGB
o
Output
Video + Audio (L/R)
Only TV or DTV output is available.
-Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
2Connecting HDMI
- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players).
- No additional Audio connection is needed for an HDMI to HDMI connection.
What is HDMI?
- “High Definition Multimedia interface” allows the transmission of high definition digital video data and
multiple channels of digital audio (5. 1 channels).
- The HDMI/DVI IN terminal supports DVI connection to an extended device with the appropriate
cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in
size, has the HDCP(High Bandwidth Digital Copy Protection) coding feature installed, and supports
multi - channel digital audio.
You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the
“R - AUDIO - L” terminal on DVI for sound output.
- When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console
etc, make sure that it has been set to a compatible video output mode as shown in the table below.
Failure to observe this may result in picture distortion, image breakup or no picture.
English - BN68-01169L-00Eng-0731.indd 5
2007-08-17 �� 3:38:26
Supported modes for HDMI/DVI and Component
HDMI/DVI 50Hz
HDMI/DVI 60Hz
Component
480i
X
X
O
480p
X
O
O
576i
X
X
O
576p
O
X
O
720p
O
O
O
1080i
O
O
O
- The HDMI/DVI IN jack support PC connection.
3 Connecting Computer
- Connect the D- Sub cable (optional) to "PC (PC IN)" on the rear of your set and the other end to the Video Card of your computer.
- Connect the stereo audio cable (optional) to "AUDIO (PC IN)" on the rear of your set and the other end to "Audio Out" of the sound card on your computer.
4Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial / A cable television network / A satellite network
5Connecting CI (Common Interface) CARD
- When not inserting "CI CARD" in some channels,"Scrambled Signal" is displayed on the screen.
- The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.
- When the channel information configuration has finished, the message "Updating Completed" is displayed, indicating that the channel list is now updated.
You must obtain a CI CARD from a local cable service provider.
Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD may cause damage to it.
Insert the CI-Card in the direction marked on it.
7 Connecting External A/V Devices
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corre
sponding audio out connectors on the A/V device.
- Headphone may be connected to the headphone output (6) on the rear of your set. While the head phone is connected, the sound from the built-in speakers will be disabled.
8DIGITAL AUDIO OUT (OPTICAL)
- Connect to a Digital Audio Component.
9 EX-LINK
- Service connection for qualified service engineer.
0 Connecting Component Devices (DTV/DVD)
- Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of
your set and the other ends to corresponding component video out connectors on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box
to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("PR", "PB", "Y") on your
set.
- The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y,
B-Y and R-Y or Y, Cb and Cr.
- Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to
corresponding audio out connectors on the DTV or DVD.
- This LCD TV displays its optimum picture resolution in 720p mode.
- This LCD TV displays its maximum picture resolution in 1080i mode.
!Kensington Lock
- The Kensington lock (optional) is a device used to physically fix the system when used in a public place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The place of the Kensington Lock may be different depending on its model.
English - BN68-01169L-00Eng-0731.indd 6
2007-08-17 �� 3:38:26
Viewing the Remote Control
1Selects a target device to be
controlled by the Samsung remote control (TV, DVD, STB, CABLE, VCR)
(Refer to page 47~50)
2Television Standby button
3Number buttons for direct
channel access
4One/Two-digit channel selection
5It display "Channel List"
on the screen.
6Selects the TV and DTV mode directly
7VCR/DVD Functions
Rewind, Stop, Play/Pause,
Fast/Forward
aSelects the HDMI mode directly.
bP : Next channel
P : Previous channel
cExit the OSD
dControl the cursor in the menu
eUse to see information on the current broadcast
g Colour buttons: Press to add
or delete channels and to
store channels to the favorite
channel list in the “Channel
List” menu.
hPicture-In-Picture On / Off
iDigital subtitle display
8 Volume increase
Volume decrease
jPicture effect selection
9Temporary sound switch-off
lWhen your remote does not work, change the batteries and press the "RESET"
button for 2-3 seconds before
use.
0Menu display and
change confirmation
!Returns to the previous
menu
@SRS TS XT selection
#Electronic Program Guide (EPG) display
$Picture size selection
%Sound effect selection
^Adjusts 5 separate devices - TV, DVD, STB, CABLE or
VCR.
&When pressing this button, a number of buttons on the remote control (e.g. Selects a target device, volume,
channel buttons) light up
for a few seconds and then
turn off to save power. This
function is to conveniently
use the remote control at
night or when dark.
*Available source selection
kPicture freeze
Teletext Functions
6Exit from the teletext display
0Teletext index
$Teletext size selection
*Teletext mode selection (LIST/FLOF)
(Teletext sub page
bP : Teletext next page
P : Teletext previous page
cTeletext cancel
eTeletext reveal
fAlternately select Teletext, Double or Mix.
gFastext topic selection
hTeletext hold
jTeletext store
(Previous channel
)DTV menu display
The performance of the remote control may be affected by bright light.
This is a special remote control for the visually impaired and has Braille points on the Power, Channel, STOP, PLAY/PAUSE and Volume buttons.
English - BN68-01169L-00Eng-0731.indd 7
2007-08-17 �� 3:38:26
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the figure.
2. Install two AAA size batteries.
Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be
using the remote control for a long time. The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
Switching On and Off
The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
The standby indicator lights up on the front of the set.
2. Press the button on the front of the set.
You also can press the POWER button or the TV/DTV button on the remote control to turn the TV on.
The programme that you were watching last is reselected automatically.
3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or
button on the right side of the set.
When you switch the set on for the very first time, you will be asked to choose language in
which the menus are to be displayed.
4. To switch your set off, press the POWER
button again.
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby
mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWER button on the remote control.
The screen is turned off and a red standby indicator appears on the front of your set.
2. To switch your set back on, simply press the POWER , numeric buttons (0~9), TV/DTV button or channel up/down ( / ) button again.
o not leave your set in standby mode for long periods of time (when you are away on holiday,
D
for example). It is best to unplug the set from the mains and aerial. English - BN68-01169L-00Eng-0731.indd 8
2007-08-17 �� 3:38:27
Plug & Play
When the TV is initially powered on, several basic settings
proceed automatically and subsequently. The following
settings are available.
Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2) digital terrestrial signals
are broadcasted. Please confirm with your local dealer if you can
receive DVB-T signals. Although this TV set follows the DVB-T
specification, maintaining compatibility with the future coming
DVB-T digital terrestrial broadcasts is not guaranteed. Several
functions may not be available in some countries.
Plug & Play
Start Plug & Play.
OK
EnterExit
1. Press the POWER button on the remote control.
The message "Start Plug & Play" is displayed with "OK" selected.
2. Select the appropriate language by pressing the ▲ or ▼ button.
Press the ENTER/OK button to confirm your choice.
3. Press the ◄ or ► button to select “Shop” or “Home”, then the ENTER/OK button.
We recommend setting the TV to Home mode for the best picture in your home environment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode, press the Volume button and then hold down the MENU button for five seconds on the side panel of the TV.
4. The message "Check antenna input." is displayed with "OK" selected. Press the ENTER/OK button.
Please check that the antenna cable is connected correctly.
5. Select the appropriate country by pressing the ▲ or ▼ button.
Press the ENTER/OK button to confirm your choice.
6.The message “Some DTV functions may not be available. Digital Scan?" is displayed.
Press the ◄ or ► button to select “Yes” or “No”, then press the ENTER/OK button.
 Yes: First an ATV search is performed and then a DTV ch. auto search is performed.
 No: Only an ATV search is performed.
This function is supported for all countries except for the following 6 countries: the United
Kingdom, Austria, France, Germany, Italy and Spain.
7. The "Auto Store" menu is displayed with the "Start" selected. Press the ENTER/OK button.
The channel search will start and end automatically.
The DTV channel scan menu appears and the DTV channel is automatically updated.
If the DTV channel is updated, the Source in the source list of the Input menu is automatically
changed to DTV. After all the available channels are stored, the "Clock Set" menu appears.
Press the ENTER/OK button at any time to interrupt the memorization process.
For detailed descriptions about DTV channel update, refer to page 32 of this manual.
After all the available digital channels are stored, the screen to select a time zone is displayed
depending on the country.
8. Press the ENTER/OK button.
Select the "Month", "Day", "Year", "Hour" or "Minute" by pressing the ◄ or ► button.
Set the "Month", "Day", "Year", "Hour" or "Minute" by pressing the ▲ or ▼ button.
You can also set the "Month", "Day", "Year", "Hour" and "Minute" by pressing the number buttons on
the remote control.
9.Press the ENTER/OK button to confirm your setting. The message "Enjoy your viewing" is displayed.
When you have finished, press the ENTER/OK button.
Even if the ENTER/OK button is not pressed, the message will automatically disappear after several
seconds.
 Language: Select your language.
 Country: Select your country.
 Auto Store: Automatically scans for and stores channels available in the local area.
 Clock Set: Sets the current time for the TV clock.
English - BN68-01169L-00Eng-0731.indd 9
2007-08-17 �� 3:38:27
If you want to reset this feature...
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
2. Press the ENTER/OK button again, to select "Plug & Play".
3. The message "Start Plug & Play" is displayed.
(Refer to page 9)
Setup
Plug & Play
Language
:English
Time
Game Mode
:Off
Blue Screen
:Off
Melody
:Medium
PC
Home Theatre PC
Light Effect
:In Watching TV
Energy Saving
:Off
HDMI Black Level :Low
PIP
Move Enter












Return
Plug & Play
Start Plug & Play.
OK
Enter
- Storing Channels Automatically
- Storing Channels Manually
TV
Return
Channel
Country
: Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move Enter







Return
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability depends on your country).
Automatically allocated programme numbers may not correspond to actual or desired programme
numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
2. Press the ENTER/OK button to select "Country".
3. Select the appropriate country by pressing the ▲ or ▼ button.
Press the ENTER/OK button to confirm your choice.
Even though you have changed the country setting in this menu, the country setting for DTV is not
changed. (Refer to page 32)
4. Press the ▲ or ▼ button to select "Auto Store", then press the ENTER/OK button.
5. Press the ENTER/OK button.
The TV will begin memorizing all of the available channels.
Press the ENTER/OK button at any time to interrupt the memorization process and return to the "Channel" menu.
6. After all the available channels are stored, the "Sort" menu appears. (Refer to page 13)
English - 10
BN68-01169L-00Eng-0731.indd 10
2007-08-17 �� 3:38:27
Storing Channels Manually
You can store up to 100 channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Manual Store", then press the ENTER/OK button.
3. Press the ENTER/OK button to select "Programme".
4. To assign a programme number to a channel, find the correct number by pressing the ▲ or ▼
button and then press the ENTER/OK button.
You can also set a programme number by pressing number buttons on the remote control.
5. Press the ▲ or ▼ button to select "Colour System", then press the ENTER/OK button.
6. Select the colour standard required by pressing the ▲ or ▼ button then, press the ENTER/OK button.
7. Press the ▲ or ▼ button to select "Sound System", then press the ENTER/OK button.
8. Select the sound standard required by pressing the ▲ or ▼ button, then press the ENTER/OK button.
If there is an abnormal sound or no sound, re-select the sound system required.
9.
If you know the number of the channel to be stored, press the ▲ or ▼ button to select "Channel". Press the ENTER/OK button. Select C (Air channel) or S (Cable channel) by pressing the ▲ or ▼
button. Press the ► button to select channel.
Select the required number by pressing the ▲ or ▼ button and then press the ENTER/OK button.
Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)
You can also set a channel number by pressing number buttons on the remote control.
10. If you do not know the channel numbers, press the ▲ or ▼ button to select "Search".
Press the ENTER/OK button. Search by pressing the ▲ or ▼ button and then press the ENTER/OK button.
11. Press the ▲ or ▼ button to select "Store". Press the ENTER/OK button to select "OK".
12. Repeat steps 3 to 11 for each channel to be stored.
 Programme: Selects a program number for the channel.
 Colour System: Sets the colour supporting system.
 Sound System: Sets the sound supporting system.
 Channel: Selects a channel.
 Search: Scans for the frequency value for the channel.
 Store: Saves your settings.
English - 11
BN68-01169L-00Eng-0731.indd 11
2007-08-17 �� 3:38:28
Setting the Channel Lists
Set the channels according to your preference.
You can easily delete, add or lock the channel you want.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER/OK button.
Channel List
P 1 C3
1 / 10
Prog.
0
2. Press the ▲ or ▼ button to select "Channel Manager",
then press the ENTER/OK button.
C3
2
BBC 1
3 C74
3. Press the ENTER/OK button again, to select "Channel List".
4. Press the ► button to select "
4 C75
" line.
5 C76
6 S3
5. Press the ▲ or ▼ button to select the undesired channel,
then press the ENTER/OK button to cancel.
7 S4
8 S6
6. Repeat steps 5 for each channel to be selected or canceled
9 S7
7. Press the EXIT button to exit.
"
C--
1
Add
" is active when "Child Lock" is selected to "On".
Lock
Move
Enter
Page
Return
You can select these options by simply pressing the CH LIST button on the remote control
Activating the Child Lock
This feature allows you to prevent unauthorized users, such
as children, from watching unsuitable programmes by muting
out video and audio.
Child Lock cannot be released using the buttons on the side.
Only the remote control can release the Child Lock setting,
so keep the remote control away from children.
Channel Manager
TV
Channel List
Child Lock
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Channel Manager",
then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "Child Lock", then press the ENTER/OK button.
4.Press the ▲ or ▼ button to select "On". Press the
ENTER/OK button.
1 / 10
0
C--
1
C3
2
BBC 1
5 C76
Select "On" or "Off" in "Child Lock" to easily turn the channels which selected on " " to be active or inactive.
Return
Prog.
6. Press the ► button to select " " line.
9. Press the EXIT button to exit.
Enter
Channel List
3 C74
8. Repeat steps 7 for each channel to be locked or unlocked.
Off
On
P 1 C3
5. Press the ▲ or ▼ button to select "Channel List",
then press the ENTER/OK button.
7. Press the ▲ or ▼ button to select the channels you want to lock, then press the ENTER/OK button.
Move :
4 C75
6 S3
7 S4
8 S6
9 S7
Add
Lock
Move
Enter
Page
Return
English - 12
BN68-01169L-00Eng-0731.indd 12
2007-08-17 �� 3:38:28
Sorting the Stored Channels
You can exchange the numbers of two channels, in order to:
TV
Channel
Country
: Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Modify the numeric order in which the channels have been automatically stored.
Give easily remembered numbers to the channels that you watch most often.







1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Sort", then press the ENTER/OK button.
Move TV
3. Select the channel number that you wish to change by press
ing the ▲ or ▼ button repeatedly. Press the ENTER/OK button.
The selected channel number and name are moved to right side.
4. Press the ▲ or ▼ button to move to the position in which you would like to change and then press the ENTER/OK button.
The selected channel is exchanged with the one previously stored to the chosen number.
5. Repeat steps 3 to 4 for another channel to be sorted.
Enter
Return
Sort
Prog.
Ch.
Name
30
31
32
33
34
35
36
37
38
39
C50
C23
C16
C32
C33
C34
C35
C36
C37
C38
---------
-------------
---------------------
Move 
Enter
Return
6. Press the EXIT button to exit.
Assigning Channels Names
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed,
allowing you to assign new names.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER/OK button.
2. Press the ▲ or ▼ button to select "Name", then press the
ENTER/OK button.
3. If necessary, select the channel to be assigned to a new
name by pressing the ▲ or ▼ button. Press the ENTER/OK
button.
he selection bar is displayed around the name box.
T
4.
To...
Press the...
Select a letter, number or symbol
▲ or ▼ button
Move on the next letter
► button
Move back the previous letter
◄ button
Confirm the name
ENTER/OK button
Channel
Country
: Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move TV
Enter







Return
Name
Prog.
Ch.
Name
30
31
32
33
34
35
36
37
38
39
C50
C23
C16
C32
C33
C34
C35
C36
C37
C38
---------------------
---------------------
Move Enter
Return
he characters available are : Letters of the alphabet (A~Z) / Numbers (0~9) /
T
Special characters (space, /, *, -, +)
5. Repeat steps 3 to 4 for each channel to be assigned to a new name.
6. Press the EXIT button to exit.
English - 13
BN68-01169L-00Eng-0731.indd 13
2007-08-17 �� 3:38:29
Fine Tuning Channel Reception
Use fine tuning to manually adjust a particular channel for
optimal reception.
TV
Channel
Country
: Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
1. Use the number buttons to directly select the channel that you want to fine tune.
2. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "Fine Tune", then press the ENTER/OK button.
4. Press the ◄ or ► button to adjust the fine tuning.
Press the ENTER/OK button.
Move To reset the fine-tuning, select "Reset" by pressing the
▲ or ▼ button and then press the ENTER/OK button.
Return
Fine Tune
P1
0
5. Press the EXIT button to exit.
Fine tuned channels that have been saved are marked with an asterisk "*" on the right-hand side of the channel number in the channel banner. And the channel number turns red.
Enter







Reset
Adjust Save
Return
English - 14
BN68-01169L-00Eng-0731.indd 14
2007-08-17 �� 3:38:30
Changing the Picture Standard
You can select the type of picture which best corresponds to
your viewing requirements.
TV
1. Press the MENU button to display the menu.
Press the ENTER/OK button, to select "Picture".
2. Press the ENTER/OK button again to select "Mode".
3. Press the ▲ or ▼ button to select the desired picture effect.
Press the ENTER/OK button.
4. Press the EXIT button to exit.
Move TV
 Standard: Selects the picture for optimum display
in a normal environment.
 Movie: Selects the picture for comfortable display
in a dark room.
The "Picture" mode must be adjusted separately for each
input source.
You can return to the factory defaults picture settings by
selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory
Defaults" on page 19)
Enter
Return
Picture
Mode
: Dynamic
Dynamic
Standard
Contrast
100
Movie
Brightness
45
Sharpness 75
Colour 55
Tint
G 50
R 50
Colour Tone
: Cool1
Detailed Settings Backlight
: 10
Size
: Auto Wide
Screen Mode
: 16 : 9
More
 Dynamic: Selects the picture for high-definition
in a bright room.
Picture
Mode
: Dynamic 
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint
G 50
R 50
Colour Tone
: Cool1 
Detailed Settings 
: 10 
Backlight
Size
: Auto Wide 
Screen Mode
: 16 : 9 
More
Move Enter
Return
You can also press the P.MODE button on the remote control to select one of the
picture settings.
Adjusting the Custom Picture
Your set has several settings which allow you to control
picture quality.
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
2. Press the ▲ or ▼ button to select a particular item. Press the ENTER/OK button.
3. Press the ◄ or ► button to decrease or increase the value of a particular item. Press the ENTER/OK button.
TV
Picture
Mode
: Dynamic 
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint
G 50
R 50
Colour Tone
: Cool1 
Detailed Settings 
Backlight
: 10 
Size
: Auto Wide 
Screen Mode
: 16 : 9 
More
Move Enter
Return
4. Press the EXIT button to exit.
 Contrast: Adjusts the lightness and darkness between objects and the background.
 Brightness: Adjusts the brightness of the whole screen.
 Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.
 Colour: Adjusts the colours, making them lighter or darker.
 Tint: A
djusts the colour of objects, making them more red or green for a more natural look.
The adjusted values are stored according to the selected Picture mode.
In PC Mode, Only "Contrast" and "Brightness" can be adjusted.
"Tint" is only activated for NTSC broadcasting, DTV broadcasting, and Component modes.
English - 15
BN68-01169L-00Eng-0731.indd 15
2007-08-17 �� 3:38:31
Changing the Colour Tone
You can select the most comfortable colour tone to your
eyes.
TV
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
(On page 15)
2. Press the ▲ or ▼ button to select "Colour Tone", then press
the ENTER/OK button.
3. Press the ▲ or ▼ button to select the desired colour tone
setting. Press the ENTER/OKbutton.
4. Press the EXIT button to exit
Picture
Mode
: Dynamic 
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint
G 50
R 50
Colour Tone
: Cool1 
Detailed Settings 
Backlight
: 10 
Size
: Auto Wide 
Screen Mode
: 16 : 9 
More
Move TV
Enter
Return
Picture
Mode
: Dynamic
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint
G 50
R 50
Cool 2
Colour Tone
: Cool1
Cool 1
Detailed Settings
Normal
Backlight
: 10
Warm
1
Size
: Auto
Wide
Warm
2
Screen Mode
: 16 : 9
More
 Cool2: Makes the colour temperature bluer than "Cool1" menu.
 Cool1: Makes whites bluish.
 Normal: Keeps whites white.
 Warm1: Makes whites reddish.
 Warm2:Makes the colour temperature redder than
"Warm1" menu.
Move Enter
Return
The adjusted values are stored according to the selected "Picture" mode.
When the picture mode is set to "Dynamic" or "Standard", "Warm1" and "Warm2" cannot be
selected.
Activating Backlight
You can adjust the screen brightness by adjusting the LCD
backlight brightness. (0~10)
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
(On page 15)
2.Press the ▲ or ▼ button to select “Backlight”, then press the ENTER/OK button.
3.Press the ◄ or ► button to decrease or increase the value of a particular item.
4. Press the ENTER/OK button.
TV
Picture
Mode
: Dynamic 
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint
G 50
R 50
Colour Tone
: Cool1 
Detailed Settings 
Backlight
: 10 
Size
: Auto Wide 
Screen Mode
: 16 : 9 
More
Move Enter
Backlight
Press the EXIT button to exit.
The adjusted values are stored according to the selected
"Picture" mode.
Return
10
Adjust Return
English - 16
BN68-01169L-00Eng-0731.indd 16
2007-08-17 �� 3:38:32
Configuring Detailed Settings on the Picture
You can set detailed picture settings.
TV
1. Press the MENU button to display the menu.
2. Press the ENTER/OK button, to select "Picture".
3. Press the ▲ or ▼ button to select "Detailed Settings", then press the ENTER/OK button.
4. Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.
Available options: Black Adjust, Dynamic Contrast, Gamma,
White Balance, My Colour Control, Edge Enhancement,
Colour Space.
5. When you are satisfied with your setting, press the
ENTER/OK button.
Picture
Mode
: Movie 
Contrast 80
Brightness 45
Sharpness 10
Colour 53
Tint
G 50
R 50
Colour Tone
: Warm2 
Detailed Settings 
Backlight
:5 
Size
: Auto Wide 
Screen Mode
: 16 : 9 
More
Move Enter
Return
Detailed Settings
TV
Black Adjust
: Off
Dynamic Contrast
: Off
Gamma
: 0
White Balance
My Colour Control
Edge Enhancement : Off
Colour Space
: Auto







6. Press the EXIT button to exit.
When the picture mode is set to "Movie" or "Standard",
"Detailed Settings" can be selected.
Move Enter
Return
If "DNIe" is Off, the "Detailed Settings" cannot be selected
when the "Picture" mode is in "Standard" mode.
 Black Adjust: Off/Low/Medium/High
You can directly select the black level on the screen to adjust the screen depth.
 Dynamic Contrast: Off/Low/Medium/High
You can adjust the screen contrast so that the optimal contrast is provided.
 Gamma: -3 ~ +3
You can adjust the middle brightness of pictures.
Press the ◄ or ► button until you reach the optimal setting.

White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset
You can adjust the colour temperature for more natural picture colours.
R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the
adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults.

My Colour Control: Pink/Green/Blue/White/Reset
This setting can be adjusted to suit your personal preferences.
Pink/Green/Blue/White: Changing the adjustment value will refresh the adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted colours will be reset to the factory defaults.
 Edge Enhancement: Off/On
You can emphasize object boundaries.
 Colour Space: Auto/Wide
You can set the colour reproduction space for the input signal to Auto or Wide.
English - 17
BN68-01169L-00Eng-0731.indd 17
2007-08-17 �� 3:38:32
Changing the Picture Size
You can select the picture size which best corresponds to
your viewing requirements.
TV
Picture
Mode
: Dynamic 
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint
G 50
R 50
Colour Tone
: Cool1 
Detailed Settings 
Backlight
: 10 
Size
: Auto Wide 
Screen Mode
: 16 : 9 
More
1. Press the MENU button to display the menu.
Press the ENTER/OK button, to select "Picture".
2. Press the ▲ or ▼ button to select "Size", then press the ENTER/OK button.
3. Select the required option by pressing the ▲ or ▼ button.
Press the ENTER/OK button.
Move TV
4. Press the EXIT button to exit.
Auto Wide: Automatically adjusts the picture size to the "16:9"
aspect ratio.
Wide: Adjusts the picture size to 16:10 appropriate for DVDs or
wide broadcasting.
16:9:Adjusts the picture size to 16:9 appropriate for DVDs or
wide broadcasting.
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom: Magnifies the 16:9 wide picture (in the vertical direction)
to fit the screen size.
4:3:This is the default setting for a video movie or normal
broadcasting.
Just Scan: Displays the input scenes as they are without any
cutoff when HDMI 720p,1080i signals are input.
"Auto Wide" function is available only in "TV", "Ext.", "AV",
"S-Video" and "DTV" mode.
Enter
Return
Size
Auto Wide
Wide
16 : 9
Wide Zoom
Zoom
4:3
Just Scan
Move Enter
Return
You can select these options by simply pressing the P.SIZE button on the remote control.
In PC Mode, only "Wide" and "4:3" mode can be adjusted.
Zoom : Select
by pressing the ◄ or ► button.
Use the ▲ or ▼ button to move the picture up and
down. After selecting , use the ▲ or ▼ button to
magnify or reduce the picture size in the vertical
direction.
Wide Zoom : Move the screen up/down using the▲ or ▼
buttons after selecting the
by pressing the ►
or ENTER/OK button.
English - 18
BN68-01169L-00Eng-0731.indd 18
2007-08-17 �� 3:38:33
Freezing the Current Picture
Press the STILL button to freeze a moving picture into a
still one. Press again to cancel.
Selecting the Screen Mode
When setting the picture size to Auto Wide in a 16:9 wide TV,
you can determine the picture size you want to see the 4:3
WSS (Wide Screen Service) image or nothing. Each individual
European country requires different picture size so this
function is intended for users to select it.
TV
1. Press the MENU button to display the menu.
Press the ENTER/OK button, to select “Picture”.
2. Press the ▲ or ▼ button to select "Screen Mode", then press the ENTER/OK button.
Picture
Mode
: Dynamic 
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint
G 50
R 50
Colour Tone
: Cool1 
Detailed Settings 
Backlight
: 10 
Size
: Auto Wide 
Screen Mode
: 16 : 9 
More
MoveEnter
Move Enter
TV
3. Select the required option by pressing the ▲ or ▼ button.
Press the ENTER/OK button.
Available options: Wide, 16:9, Wide Zoom, Zoom, 4:3
Return
Return
Picture
Mode
: Dynamic
Contrast 100
Brightness 45
Sharpness 75
Colour 55
Tint
G 50
R 50
Colour Tone
: Cool1
Detailed Settings
Wide
16:9
Backlight
: 10
WideWide
Zoom
Size
: Auto
Screen Mode
: 16 : Zoom
9
4:3
More
W
ide: Sets the picture to 16:10 wide mode.
 16:9: Sets the picture to 16:9 wide mode.
 Wide Zoom: Magnify the size of the picture more than 4:3.
 Zoom: Magnify the size of the picture vertically on screen.
 4:3: Sets the picture to 4:3 normal mode.
Move Enter
Return
4. Press the EXIT button to exit.
Screen Mode is available in Auto Wide mode.
This function is not available in PC, Component or HDMI mode.
Resetting the Picture Settings to the Factory Defaults
You can return to the factory defaults picture settings.
TV
Picture
More
Digital NR
Active Colour
DNle
Reset
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3 on page 15.
: Auto
: On
: On
: OK




2. Press the ▲ or ▼ button to select "Reset", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "OK" or "Cancel".
Press the ENTER/OK button.
Move TV
4. Press the EXIT button to exit.
The "Reset" will be set for each picture mode.
Enter
Return
Picture
More
Digital NR
Active Colour
DNle
Reset
Move : Auto
: On
: On
: OK
OK
Cancel
Enter
Return
English - 19
BN68-01169L-00Eng-0731.indd 19
2007-08-17 �� 3:38:34
Digital NR / Active Colour / DNIe
If the broadcast signal received by your TV is weak, you can
activate the Digital Noise Reduction feature to help reduce
any static and ghosting that may appear on the screen.
1. Press the MENU button to display the menu.
Press the ENTER/OK button, to select “Picture”.
2. Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.
Available options: Digital NR, Active Colour, DNIe.
TV
Picture
More
Digital NR
Active Colour
DNle
Reset
Move : Auto
: On
: On
: OK
Enter




Return
3. When you are satisfied with your setting, press the
ENTER/OK button.
4. Press the EXIT button to exit.
 Digital NR: Off/Low/Medium/High/Auto
If the signal received by the television is weak, you can activate this feature to reduce any static and
ghosting that may appear on the screen.
This function is not available in PC mode.
 Active Colour: Off/On
If you turn on this option, the colours of the sky and grass will be stronger and clearer for a more
vivid on-screen picture.

This function is not available in PC mode.
This function is not available in Movie and Standard mode.
DNIe: Off/Demo/On
This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you
can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the
applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view the difference in the visual quality.
DNIeTM (Digital Natural Image engine)
This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. New image compensation Algorithm gives brighter,
clearer, more detailed image to you. DNIeTM technology will fit every signal into your eyes.
This function is not available in PC mode.
This function is not available in Movie mode.
English - 20
BN68-01169L-00Eng-0731.indd 20
2007-08-17 �� 3:38:35
Viewing the Picture In Picture (PIP)
You can display a sub picture within the main picture of set
programme or video input. In this way, you can watch the
picture of set programme or video input from any connected
equipment while watching the main picture.
TV
3. Press the ENTER/OK button again.
Press the ▲ or ▼ button to select "On", then press
ENTER/OK button.
4. Press the ▲ or ▼ button to select "Source",then press ENTER/OK button. Select a source of the sub picture by pressing the ▲ or ▼ button and press the ENTER/OK button.
The sub picture can serve different source selections based on what the main picture is set to.
Main picture
Sub picture
Component
HDMI
PC
Analog TV broadcasts
Ext
AV










PC

Home Theatre PC
:Off 
Light Effect
:In Watching TV
Energy Saving
:Off 
HDMI Black
Level :Low

MoveEnter
Return
PIP

1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "PIP", then press the ENTER/OK button.
Mode
:Custom
Setup
Equalizer
Plug & Play
:Off
SRS TS XT
Language
:English
Time
:Off
Auto Volume
Game
Mode
:Off
:Off
Internal
Mute
Blue Screen
:Off
Reset
Melody
:Medium
TV
Move Enter
Return
Mode
:Custom
PIP
Equalizer
PIP
: On
XT
:Off
SRS
TS
Source
:
TV
Position
:
:Off
Auto Volume
Programme
:
P 1
:Off
Internal
Mute
Reset
MoveEnter
Move 








Return
Enter
Return
Press the PIP button on the remote control repeatedly to
activate or deactivate the "PIP".
5.Press the ▲ or ▼ button to select "Position", then press the
ENTER/OK button.
Select the position of the sub picture by pressing the ▲ or ▼ button and then press the ENTER/OK
button.
6.Press the ▲ or ▼ button to select "Programme" and then press the ENTER/OK button.
You can select the channel that you want to view through sub picture by pressing the ▲ or ▼
button. Press the ENTER/OK button.
The "Programme" can be active when the sub picture is set to TV.
7. Press the EXIT button to exit.
You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke.
 Source: Used to select a source of the sub picture.
 Position: Used to move the sub picture.
 Programme: Used to Change the sub picture.
English - 21
BN68-01169L-00Eng-0731.indd 21
2007-08-17 �� 3:38:36
HDMI Black Level
You can directly select the black level on the screen to adjust
the screen depth.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.











PC
Home Theatre PC
:Off

Light Effect
:In Watching TV 
Energy Saving
:Off

HDMI Black
Level :Low

MoveEnter
Return
PIP

2. Press the ▲ or ▼ button to select "HDMI Black Level", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "Normal" or "Low", then press the ENTER/OK button.
Mode
:Custom
Setup
Equalizer
Plug & Play
XT
:Off
SRS
TS
Language
:English
Time
:Off
Auto Volume
Game
Mode
:Off
:Off
Internal
Mute
Blue Screen
:Off
Reset
Melody
:Medium
TV
4. Press the EXIT button to exit.
This function is active only when the external input connects
to HDMI (RGB signals).
Move Enter
Return
Mode
:Custom
Setup
Equalizer
Plug & Play
:Off
SRS TS XT
Language
:English
Time
:Off
Auto Volume
Game
Mode
:Off
:Off
Internal
Mute
Blue Screen
:Off
Reset
Melody
:Medium





PC
Home Theatre PC
:Off
Light Effect
:In Watching TV
Energy Saving
:Off
HDMI Black
Level
:LowNormalReturn
MoveEnter
Low
PIP
 Normal: The screen gets brighter.
 Low: The screen gets darker.
Move Enter
Return
Changing the Sound Standard
You can select the type of the special sound effect to be used
when watching a given broadcast.
TV
Sound
Mode
: Custom
Equalizer
SRS TS XT
: Off
Auto Volume
: Off
: Off
Internal Mute
Sound Select
: Main
Reset
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER/OK button.






2. Press the ENTER/OK button again, to select "Mode".
3. Select the required sound effect by pressing the ▲ or ▼
button repeatedly and then press the ENTER/OK button.
4. Press the EXIT button to exit.
 Standard: Selects the normal sound mode.
 Music: Emphasizes music over voices.
 Movie: Provides live and full sound for movies.
 Speech: Emphasizes voices over other sounds.
 Custom: Selects your custom sound settings.
(Refer to "Adjusting the Sound Settings")
Move TV
Enter
Return
Sound
Standard
Mode
: Custom
Music
Equalizer
Movie
SRS TS XT
: Off
Speech
Auto Volume
: Off
Custom
Internal Mute
: Off
Sound Select
: Main
Reset
Move Enter
Return
English - 22
BN68-01169L-00Eng-0731.indd 22
2007-08-17 �� 3:38:37
Adjusting the Sound Settings
The sound settings can be adjusted to suit your personal
preferences.
TV
Sound
Mode
: Custom
Equalizer
SRS TS XT
: Off
Auto Volume
: Off
Internal Mute
: Off
: Main
Sound Select
Reset
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER/OK button.






2. Press the ▲ or ▼ button to select "Equalizer", then press the ENTER/OK button.
3. Press the ◄ or ► button to select a particular item.
Press the ENTER/OK button.
Move Enter
Return
Equalizer
TV
4. Press the ▲ or ▼ button to reach the required setting.
Press the ENTER/OK button.
5. Press the EXIT button to exit.
If you make any changes to these settings, the Sound Mode is automatically switched to "Custom".
Balance 100Hz 300Hz 1kHz 3kHz 10kHz
Move
Adjust
Return
Setting the TruSurround XT (SRS TS XT)
TruSurround XT is a patented SRS technology that solves
the problem of playing 5.1 multichannel content over two
speakers. TruSurround delivers a compelling,virtual surround
sound experience through any two-speaker playback system,
including internal television speakers. It is fully compatible
with all multichannel formats.
TV
Sound
Mode
: Custom
Equalizer
SRS TS XT
: Off
Auto Volume
: Off
Internal Mute
: Off
Sound Select
: Main
Reset
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER/OK button.
Move TV
2. Press the ▲ or ▼ button to select "SRS TS XT", then press the ENTER/OK button.
Enter






Return
Sound
Mode
: Custom
Equalizer
SRS TS XT
: Off
Off
On
Auto Volume
: Off
Internal Mute
: Off
Sound Select
: Main
Reset
3. Press the ▲ or ▼ button to select "On" or "Off". Press the ENTER/OK button.
4. Press the EXIT button to exit.
symbol are
TruSurround XT, SRS and
trademarks of SRS Labs, Inc. TruSurround XT
technology is incorporated under license from
SRS Labs, Inc.
Move Enter
Return
You can also set these options simply by pressing the SRS
button on remote control.
English - 23
BN68-01169L-00Eng-0731.indd 23
2007-08-17 �� 3:38:38
Connecting Headphones
You can connect a set of headphones to your set if you wish to
watch a TV programme without disturbing the other people in the
room.
TV Rear Panel
When you insert the head set jack into the corresponding port, you can not operate "Internal Mute" in Sound menu.
Prolonged use of headphones at a high volume may damage your hearing.
You will not receive sound from the speakers when you connect headphones to the system.
The headphone volume and TV volume are adjusted differently.
Selecting the Sound Mode
You can set the sound mode by pressing the “DUAL” button.
When you press it, the current sound mode is displayed on the
screen.
A2
Stereo
NICAM
Stereo
Audio Type
Mono
Stereo
Dual
Mono
Stereo
Dual
Dual 1/2
Mono
Stereo ↔ Mono
Dual 1 ↔ Dual 2
Mono
Mono ↔ Stereo
Mono ↔ Dual 1
Dual 2
Default
Automatic
change
Dual 1
You can also set these options simply by pressing the DUAL
button on remote control.
Automatic
change
Dual 1
If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.
This function is only activated in stereo sound signal. It is deactivated in mono sound signal.
Adjusting the Volume Automatically
Each broadcasting station has its own signal conditions and
so it is not easy for you to adjust the volume every time the
channel is changed. This feature allows you to automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Auto Volume", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "On" or "Off". Press the ENTER/OK button.
TV
Sound
Mode
: Custom
Equalizer
SRS TS XT
: Off
Auto Volume
: Off
Internal Mute
: Off
Sound Select
: Main
Reset
Move Enter






Return
Sound
TV
Mode
: Custom
Equalizer
SRS TS XT
: Off
: Off
Auto Volume
Off
On
Internal Mute
: Off
Sound Select
: Main
Reset
4. Press the EXIT button to exit.
Move Enter
Return
English - 24
BN68-01169L-00Eng-0731.indd 24
2007-08-17 �� 3:38:39
Selecting the Internal Mute
If you want to hear the sound through separate speakers,
cancel the internal amplifier.
TV
Sound
Mode
: Custom
Equalizer
SRS TS XT
: Off
Auto Volume
: Off
Internal Mute
: Off
: Main
Sound Select
Reset
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Internal Mute", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "On" or "Off". Press the ENTER/OK button.
TV
Enter
Return
Sound
Mode
: Custom
Equalizer
SRS TS XT
: Off
: Off
Auto Volume
Internal Mute
: Off
Off
On
Sound Select
:
Reset
4. Press the EXIT button to exit.
Move 





When "Internal Mute" is set to "On", the Sound menus except for "Sound Select" (in PIP mode) cannot be adjusted.
Move Enter
Return
Listening to the Sound of the Sub Picture
During the PIP features activation, you can listen to the sound
of the sub picture.
TV
Sound
Mode
: Custom
Equalizer
SRS TS XT
: Off
Auto Volume
: Off
: Off
Internal Mute
Sound Select
: Main
Reset
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Sound Select", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "Sub".
Press the ENTER/OK button.
4. Press the EXIT button to exit.
 Main : Used to listen to the sound of the main picture.
 Sub : Used to listen to the sound of the sub picture.
Move TV
Enter






Return
Sound
Mode
: Custom
Equalizer
SRS TS XT
: Off
Auto Volume
: Off
Internal Mute
: Off
Main
Sound Select
: Main
Sub
Reset
You can select this option when the “PIP” is set to “On”.
Move Enter
Return
English - 25
BN68-01169L-00Eng-0731.indd 25
2007-08-17 �� 3:38:40
Resetting the Sound Settings to the Factory Defaults
If "Game Mode" is On, the Reset Sound function is activated
(Refer to page 28). Selecting the Reset function after setting
the equalizer resets the equalizer setting to the factory
defaults.
TV
Sound
Mode
: Custom 
Equalizer 
SRS TS XT
: Off 
Auto Volume
: Off 
Internal Mute
: Off 
Sound Select
: Main

Reset
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Reset", then press the ENTER/OK button.
Move Enter
Return
3. Press the EXIT button to exit.
You can select this option when the "Game Mode" is set to "On".
Setting and Displaying the Current Time
You can set the TV’s clock so that the current time is
displayed when you press the INFO button. You must also set
the time if you wish to use the automatic On/Off timers.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
4.
To...
Press the...
Move to "Month", "Day", "Year",
"Hour" or "Minute"
◄ or ► button.
Set the "Month", "Day", "Year",
"Hour" or "Minute"
▲ or ▼ button.
Confirm the setting
ENTER/OK button.










PC

Home Theatre PC
:Off

Light Effect
:In Watching TV 
Energy Saving
:Off

HDMI Black
Level :Low

MoveEnter
Return
PIP

2. Press the ▲ or ▼ button to select "Time", then press the ENTER/OK button.
3. Press the ENTER/OK button to select "Clock Set".
Mode
:Custom
Setup
Equalizer
Plug & Play
:Off
SRS TS XT
Language
:English
Time
:Off
Auto Volume
Game
Mode
:Off
:Off
Internal
Mute
Blue Screen
:Off
Reset
Melody
:Medium
Move Enter
Return
Clock Set
TV
Month
p
01
q
Hour
00
Move Day
Year
01
2007
Minute
00
Adjust
Return
5. Press the EXIT button to exit.
If you disconnect the power cord, you have to set the clock again.
You can also set "Year", "Month", "Day", "Hour" and "Minute" by pressing the number buttons on the remote control.
English - 26
BN68-01169L-00Eng-0731.indd 26
2007-08-17 �� 3:38:41
Setting the Sleep Timer
You can select a time period of between 30 and 180 minutes
after which the television automatically switches to standby
mode.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.










PC

Home Theatre PC
:Off

Light Effect
:In Watching TV 
Energy Saving
:Off

HDMI Black
Level :Low

MoveEnter
Return
PIP

2. Press the ▲ or ▼ button to select "Time", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "Sleep Timer", then press the ENTER/OK button.
Mode
:Custom
Setup
Equalizer
Plug & Play
XT
:Off
SRS
TS
Language
:English
Time
:Off
Auto Volume
Game
Mode
:Off
:Off
Internal Mute
Blue Screen
:Off
Reset
Melody
:Medium
Move Enter
TV
Clock Set
Sleep Timer
Timer 1
Timer 2
Timer 3
4. Press the ▲ or ▼ button repeatedly until the desired time appears (Off, 30, 60, 90, 120, 150, 180).
Press the ENTER/OK button.
Return
Time
: 00 : 00
:
Off
:
30
:
60
:
90
120
150
180
5. Press the EXIT button to exit.
The TV automatically switches to standby mode when the timer reaches 0.
Move Enter
Return
Switching the Television On and Off Automatically
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
TV
2. Press the ▲ or ▼ button to select "Time", then press the ENTER/OK button.
Yes/No
Press the ▲ or ▼ button
Select a Once,
Sat~Sun, Mon~Sat,
Mon~Fri, Everyday
Press the ▲ or ▼ button
Volume
Adjust a 0~100
Press the ▲ or ▼ button
Programme
Adjust a Programme
Press the ▲ or ▼ button
Repeat










PC

Home Theatre PC
:Off

Light Effect
:In Watching TV 
Energy Saving
:Off

HDMI Black
Level :Low

MoveEnter
Return
PIP

3. Press the ▲ or ▼ button to select "Timer 1", "Timer 2",
"Timer 3", then press the ENTER/OK button.
4. Press the ▲ or ▼ button to adjust “Hour”, then press the ► button to move to the next step.
Set other items using the same method as above.
Mode
:Custom
Setup
Equalizer
Plug & Play
XT
:Off
SRS
TS
Language
:English
Time
:Off
Auto Volume
Game
Mode
:Off
:Off
Internal Mute
Blue Screen
:Off
Reset
Melody
:Medium
Move Enter
Return
Timer 1
TV
On Time
5
6
:
00
No
Off Time
00 :
00
No
00
Repeat
Once
Volume
10
Programme
01
► Move Adjust
Return
When finished, press the RETURN button to return.
• The current time will appear every time you press the INFO button.
• You can set the hour, minute, directly by pressing the number buttons on the remote control.
5. Press the EXIT button to exit.
Auto Power Off
When you set the timer “On”, the TV will eventually turn off, if no controls are operated for 3 hours
after the TV was turned on by the timer. This function is only available in timer “On” mode and
prevents overheating, which may occur if a TV is on for too long time.
English - 27
BN68-01169L-00Eng-0731.indd 27
2007-08-17 �� 3:38:42
Choosing Your Language
When you start using your set for the first time, you must
select the language which will be used for displaying menus
and indications.
TV
1. Press the MENU button to display the on-screen menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.











PC
Home Theatre PC
:Off

Light Effect
:In Watching TV 
Energy Saving
:Off

HDMI Black
Level :Low

MoveEnter
Return
PIP

2. Press the ▲ or ▼ button to select "Language", then press the ENTER/OK button.
3. Select a particular language by pressing the ▲ or ▼ button repeatedly.
Press the ENTER/OK button.
Mode
:Custom
Setup
Equalizer
Plug & Play
:Off
SRS TS XT
Language
:English
Time
:Off
Auto Volume
Game
Mode
:Off
:Off
Internal
Mute
Blue Screen
:Off
Reset
Melody
:Medium
TV
4. Press the EXIT button to exit.
Move Enter
Return
Mode
:Custom
Setup
Equalizer
Plug & Play
:Off
SRS TS XT
English
Language
:English
Deutsch
Time
:Off
Auto Volume
Français
Game
Mode
:Off
:Off
Internal
Mute
Blue Screen
:OffItaliano
Reset
Melody
:OffEspañol





Nederlands
PC Português
Home Theatre PC
:Off
Eλληνικά
Light Effect
:In Watching
TV
q
Energy Saving
:Off
HDMI Black Level :Low
PIP
Move Enter
Return
Using Game Mode
When connecting to a game console such as PlayStationTM or
XboxTM, you can enjoy a more realistic gaming experience by
selecting game menu.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
4. Press the EXIT button to exit.










PC

Home Theatre PC
:Off

Light Effect
:In Watching TV 
Energy Saving
:Off

HDMI Black
Level :Low

MoveEnter
Return
PIP

2. Press the ▲ or ▼ button to select "Game Mode", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "On" or "Off". Press the ENTER/OK button.
Mode
:Custom
Setup
Equalizer
Plug & Play
XT
:Off
SRS
TS
Language
:English
Time
:Off
Auto Volume
Game
Mode
:Off
:Off
Internal Mute
Blue Screen
:Off
Reset
Melody
:Medium
TV
Move Enter
Return
Mode
:Custom
Setup
Equalizer
Plug & Play
:Off
SRS TS XT
Language
:English
Time
:Off
Auto Volume
Game
Mode
:Off
Off
:Off
Internal
Mute
Blue Screen
:Off On
Reset
Melody
:Medium





To disconnect the game console and connect another
PC
Home Theatre PC
:Off
external device, cancel game mode in the setup menu.
Light Effect
:In Watching TV
Energy Saving
:Off
If you display the TV menu in Game mode, the screen HDMI Black
Level
:Low
MoveEnter
Return
PIP
shakes slightly.
Move Enter
Return
Game Mode is not available in TV mode.
If Game Mode is On:
• Picture Mode changes to Standard and Sound Mode changes to Custom automatically.
The user cannot change these to other modes.
• Sound Mode in the Sound menu is deactivated. Adjust the sound using the equalizer.
• The Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults.
English - 28
BN68-01169L-00Eng-0731.indd 28
2007-08-17 �� 3:38:43
Blue Screen / Melody / Energy Saving
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
TV
2.Press the ▲ or ▼ button to select "Blue Screen", "Melody" or
"Energy Saving". Press the ENTER/OK button.
Mode
:Custom
Setup
Equalizer
Plug & Play
:Off
SRS TS XT
Language
:English
Time
:Off
Auto Volume
Game
Mode
:Off
:Off
Internal
Mute
Blue Screen
:Off Off
Reset
Melody
:Off On





3. When you are satisfied with your setting,
press the ENTER/OK button.
PC
Home Theatre PC
:Off
Light Effect
:In Watching TV Energy Saving
:Off
HDMI Black
Level :Low
MoveEnter
Return
PIP
 Blue Screen: Off/On
If no signal is being received or the signal is very weak,
a blue screen automatically replaces the noisy picture
background. If you wish to continue viewing the poor picture,
you must set the "Blue Screen" mode to "Off".
Mode
:Custom
Setup
Equalizer
Plug & Play
XT
:Off
SRS
TS
Language
:English
Time
:Off
Auto Volume
Game
Mode
:Off
:Off
Internal Mute
Blue Screen
:Off
Reset
Melody
:Off Off
TV
Enter
Return





PC
Low
Medium
Home Theatre PC
:Off
High TV
Light Effect
:In Watching
Energy Saving
:Off
HDMI Black
Level :Low
MoveEnter
Return
PIP
 Melody: Off/Low/Medium/High
You can hear melody sound when the television is powered
on or off.
 Energy Saving: Off/Low/Medium/High/Auto
This function adjusts the brightness of the TV so as to reduce
power consumption. When watching TV at night, set the
"Energy Saving" mode option to "High" to reduce eye fatigue
as well as power consumption.
Move TV
4. Press the EXIT button to exit.
Move Enter
Return
Setup
Plug & Play
Language
:English
Time
Game Mode
:Off
Blue Screen
:Off
Melody
:Medium
PC
Home Theatre PC
:Off
Off
Light Effect
:In Watching
Low TV
Energy Saving
:OffMedium
HDMI Black Level :LowHigh
Auto
PIP
Move Enter
Return
Setting the Light Effect
You can turn on/off the blue LED on the front of TV according
to the situation. Use it for saving power or when the LED
dazzles your eyes.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the
ENTER/OK button.
2.Press the ▲ or ▼ button to select “Light Effect”, then press
the ENTER/OK button.
3.Press the ▲ or ▼ button to select “Off”, “In Standby”, “In
Watching TV” or “Always”, then press the ENTER/OK button.
• Off: LED will not come on.
• In Standby: Turns the LED on in standby mode.
• In Watching TV: Turns the LED on while watching TV.
• Always: LED will come on after you turn the TV off.
TV
Move Enter












Return
Setup
Plug & Play
Language
:English
Time
Game Mode
:Off
Blue Screen
:Off
Melody
:Medium
PC
Home Theatre PC
:Off
Off
Light Effect
:In Watching
TV
In Standby
Energy Saving
:Off
In Watching TV
HDMI Black Level :LowAlways
PIP
Press the EXIT button to exit.
Setup
Plug & Play
Language
:English
Time
Game Mode
:Off
Blue Screen
:Off
Melody
:Medium
PC
Home Theatre PC
:Off
Light Effect
:In Watching TV
Energy Saving
:Off
HDMI Black Level :Low
PIP
Move Enter
Return
et the "Light Effect" to "Off" to reduce power
S
consumption.
English - 29
BN68-01169L-00Eng-0731.indd 29
2007-08-17 �� 3:38:45
Selecting the Source
You can select among external sources connected to your
TV’s input jacks.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Input", then press the ENTER/OK button.
2. Press the ENTER/OK button again, to select "Source List".
When no external device is connected to your set, only "TV", "Ext.", "DTV" are activated in the
"Source List". "AV", "S-Video", "Component", "PC",
"HDMI" are activated only when they are
connected to your set.
3. Select the required device by pressing the ▲ or ▼ button.
Press the ENTER/OK button.
Mode
:Custom
Input
Equalizer
Source List
: TV
:Off
SRSName
TS XT
Edit
:Off
Auto Volume
:Off
Internal Mute
Reset
MoveEnter
TV
Move Enter







Return
Return
Mode
:Custom

Source
List
Equalizer 
TV
: ----
:Off

SRS TS XT
Ext.
:
----
AV
:
----
:Off

Auto Volume
S-Video
:
---- 
:Off
Internal Mute
Component
: ----
Reset
PC
: ----
HDMI
: ----
DTV
MoveEnter
Move Enter
Return
Return
Press the SOURCE button on the remote control to toggle between all the available source.
TV mode can be selected by pressing the TV/DTV button,
number buttons (0~9) and the P / button on the remote
control. But it cannot be selected using the SOURCE button.
Editing the Input Source Names
Name the device connected to the input jacks to make your
input source selection easier.
TV
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Input", then press the ENTER/OK button.
Mode
:Custom
Input
Equalizer
Source List
: TV
:Off
SRSName
TS XT
Edit
:Off
Auto Volume
:Off
Internal Mute
Reset
2. Press the ▲ or ▼ button to select "Edit Name", then press the ENTER/OK button.
3.
4.
Press the ▲ or ▼ button to select the device that you wish to edit.
Press the ENTER/OK button.
Press the ▲ or ▼ button to select the required device.
Press the ENTER/OK button.
MoveEnter
TV
Move Enter







Return
Return
Mode
Edit:Custom
Name
Equalizer
Ext.
:
---SRS TS XT
AV
::Off
VCR
S-Video
::Off
DVD
Auto Volume
D-VHS
Component
::Off
Internal Mute
PC
: Cable STB
Reset
HDMI
: HD STB





Satellite STB
AV Receiver
q
5. Press the EXIT button to exit.
MoveEnter
Move Enter
Return
Return
English - 30
BN68-01169L-00Eng-0731.indd 30
2007-08-17 �� 3:38:46
Previewing the DTV Menu System
T
he company does not guarantee the normal operation
of the DTV menu for countries other than the 6
supported countries (United Kingdom, Germany,
France, Italy, Spain, Austria) because only these
country standards are supported. In addition, when
the country of the broadcast stream differs from
the country selected by the current user, the string
appearing in the channel banner, Info, Guide, Channel
Manager, etc. may not be displayed properly.
Mode
:Custom
Guide
Equalizer
Now
& Next
XT Guide:Off
SRS TS
Full
:Off
AutoGuide
Volume
Scheduled
List
:Off
Internal Mute
Default
Reset Guide :Full Guide
A
vailable in DTV mode. Preset to the DTV mode by
using the TV/DTV button on your remote control. To
help you navigate around the on-screen menu system
and adjust the various settings available, refer to the
following illustration.
Channel
Country
:Others
Auto Store
Manual Store
Edit Favourite Channels
Channel List
Press the D.MENU button.
Guide
Now & Next Guide
Full Guide
Scheduled List
Default Guide
Now/Next, Full Guide
Channel
Country
Auto Store
Manual Store
Edit Favourite Channels
Channel List
All, Favourites, Default
Setup
Menu Transparency
Change PIN
Parental Lock
Subtitle
Subtitle Mode
Audio Format
Digital Text
Time Zone
System
Language
Audio Language
Subtitle Language
Teletext Language
Preference






MoveEnter
Return
Move
Exit
Enter





MoveEnter
Return
Move
Exit
Enter
Setup
Menu Transparency :Medium
Change PIN Parental Lock
:On
Subtitle Subtitle Mode : Normal






MoveEnter
Return
Move
Exit
Enter
Language
Audio Language
Subtitle Language
Teletext Language
Preference 
High, Medium, Low, Opaque
Off, On
Normal, Hard of hearing
PCM, Dolby Digital
Disable, Enable
Product Information
Signal Information
Software Upgrade
Common Interface
Reset
MoveEnter
Return
Move
Exit
Enter
You can select these options by simply pressing the
D.MENU button on the
remote control.
Primary Audio Language
Secondary Audio Language
Primary Subtitle Language
Secondary Subtitle Language
Primary Teletext Language
Secondary Teletext Language
The sub-items of the CI Menu may vary depending on the CAM model.
English - 31
BN68-01169L-00Eng-0731.indd 31
2007-08-17 �� 3:38:47
Updating the Channel List Automatically
You can update the channel list when the broadcaster
adds new Services or if you move the TV to a new
location.
1. Press the D.MENU button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Channel", then press
the ENTER/OK button.
Channel
Country
:Others
Auto Store
Manual Store
Edit Favourite Channels
Channel List
3. Press the ENTER/OK button again, to select "Country".
4. Select the appropriate country by pressing the ▲ or ▼
button. Press the ENTER/OK button to confirm your
choice.
Even though you have changed the country setting
in this menu, the country setting for Analog TV is not
changed.(Refer to page 10)





MoveEnter
Return
Move
Return
Enter
Mode

Auto:Custom
Store
Equalizer 
:Off 
SRS TS XT
:Off
Auto
Volume
Scanning
for digital
services... 
:Off 
Internal Mute
35%
Reset
Services found: 24 Channel: 38
5. Press the ▲ or ▼ button to select "Auto Store", then
press the ENTER/OK button.
Stop
MoveEnter
Return
Return
When it has finished, the number of scanned services
will be displayed.
The existing favourite channel list will not be deleted when the channel list is updated.
To stop the scan before it has finished, press the ENTER/OK button with "STOP"
selected.
6. Press the EXIT button to exit.
If the signal status is poor, the "No Service found! Check the aerial connection" message
is displayed.
Updating the Channel List Manually
You can specify the channel for a fast channel search.
1. Press the D.MENU button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Channel", then press
the ENTER/OK button.
3. Press the ▲ or ▼ button to select "Manual Store", then
press the ENTER/OK button.
Manual Store
Channel
▲
474000
65
Bandwidth
KHz
8 MHz
▼
4. Press the ▲ or ▼ button to select "Channel", then press
the ENTER/OK button.
Frequency
Search
Adjust
Return
• Channel: Channel "5" to "69" in sequence are displayed (depending on the country)
• Frequency: The frequency available in the Channel group is displayed.
• Bandwidth: The available bandwidths are 7 and 8 MHz.
5. When it has finished, the number of scanned services will be displayed.
6. Press the EXIT button to exit.
English - 32
BN68-01169L-00Eng-0731.indd 32
2007-08-17 �� 3:38:48
Editing Your Favourite Channels
You can edit your favourite channels using the four colour
buttons.
1. Press the D.MENU button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "Edit Favourite Channels",
then press the ENTER/OK button.
4. Press the red button to display all currently stored channels.
5. Press the ▲ or ▼ button to select a channel you want.
Press the ENTER/OK button.
A "" icon is shown next to the selected channel and the channel will be added to the favourite channel list.
• To undo, press the ENTER/OK button again.
• Select All: Select all channels currently displayed.
• Select None: Deselect all selected channels.
• Preview: Displays (a) currently selected channel(s).
The Favorite Channels settings have been completed.
6. Press the EXIT button to exit.
Add
You can use this function when one or more favourite
channels have been selected.
1. Press the D.MENU button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "Edit Favourite Channels",
then press the ENTER/OK button.
4. Press the red button in the "Edit Favourite Channels" menu.
To add more channels, refer to the step 5 on the previous description.
5. If you want to check the channel to be stored, press RETURN button.
Press the EXIT button to exit.
• To add all channels to the favourite channel list, press the red button.
• To remove all channels, press the green button.
• Preview : Displays (a) currently selected channel(s).
• Press the CH LIST button to display the favourite channel manager.
Edit Favourite Channels
(no Channels)
MoveEnter
Add Channels
Return
Return
Edit Favourite Channels
5
1
2
3
4
5
6
BBC TWO
Five
BBC THREE
abc1
QVC
MoveEnter
Select All
Select None
Move
Select
Return
Preview
Return
Edit Favourite Channels
1
BBC TWO
★
3
BBC THREE
★
4
abc1
★
MoveEnter
Return
Add
Renumber
Preview
Delete
Move
Return
Edit Favourite Channels
5
1
2
3
4
5
6
BBC TWO
Five
BBC THREE
abc1
QVC
★
★
★
MoveEnter
Select All
Select None
Return
Preview
Move
Return
Select
English - 33
BN68-01169L-00Eng-0731.indd 33
2007-08-17 �� 3:38:49
Renumber (depending on the country)
1. Press the D.MENU button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "Edit Favourite Channels",
then press the ENTER/OK button.
4. Select the required channel using the ▲ or ▼ button.
5. Press the green button.
The space for entering the number is a blank.
6. Enter the new channel number. Press ENTER/OK button to
store or RETURN button to cancel.
Press the ◄ button to delete an entered digit.
If you enter a number already assigned to another
channel, the number is assigned to the selected channel
and the previous number assigned to the selected channel
is assigned to the other channel.
That is, the two numbers are exchanged.
The favorite channels are automatically sorted in
ascending order of channel numbers.
7. Press the EXIT button to exit.
Preview
1. In the "Edit Favourite Channels" menu,
select the channel to be previewed by pressing the ▲ or ▼ button.
2. Press the yellow button.
The selected channel is displayed on the screen.
Edit Favourite Channels
1
BBC TWO
_ _ _
BBC THREE
★
4
abc1
★
★
MoveEnter
Edit
Return
Return
Confirm
Edit Favourite Channels
1
BBC TWO
★
3
BBC THREE
★
4
abc1
★
MoveEnter
Return
Add
Renumber
Preview
Delete
Move
Delete
1. In the "Edit Favourite Channels" menu, select the channel to be deleted from the favourite channels list by pressing the
▲ or ▼ button.
2. Press the blue button.
The selected channel and number will be deleted.
To add a deleted channel back in to the favourite channel list, see "Add" on page 33.
Return
Edit Favourite Channels
1
BBC TWO
★
3
BBC THREE
★
MoveEnter
Return
Add
Renumber
Preview
Delete
Move
Return
English - 34
BN68-01169L-00Eng-0731.indd 34
2007-08-17 �� 3:38:50
Selecting Channel List
You can exclude the channels you have chosen from the
Channel List
All Channels-All
Test Card M'
channels you have scanned.When you scan through the
1/2
23 bid-up.tv
60 Television X
1 Test Card M'
stored channels, those you have chosen to skip are not
25 TCM
70 BBC Radio 1
3 Vida003b
displayed. All channels that you do not specifically choose to
26 UKTV Style
72 BBC Radio 2
4 Vida004b
27 Discovery
73 BBC Radio 3
5 vida005b
skip are displayed during scanning.
28 DiscoveryH&L
74 BBC Radio 4
6 vida006b
15 Cartoon Nwk
84 heat
15 Ch 15
33 Boomerang
91 MOJO
16 QVC
1. Press the D.MENU button to display the DTV menu.
55 Ttext Holidays
800 ARD-MHP-Data
17 UKTV Gold
6 More
2. Press the ▲ or ▼ button to select "Channel", then press the Previous Page
NextPage
Favourites
TV
ENTER/OK button.
Move
Watch
Return
3. Press the ▲ or ▼ button to select "Channel List".
Press the ENTER/OK button.
4. Press the ▲ or ▼ button to select "All", "Favourites" or "Default".
Press the ENTER/OK button.
5. Press the yellow button to toggle between your favourite channels and all channels.
Your favourite channels are only displayed if they were previously set in the "Editing Your Favourite Channels" menu (refer to page 33).
6. Press the red or green button to display the previous or next channel List page.
7. Press the ▲ or ▼ button to select a channel to be tuned.
Press the ENTER/OK button.
The channel number, name and an icon are displayed in the top left corner while changing the channel. The channel number and name are displayed if the channel is one of the all channels, and a  icon if the channel is one of the favourite channels.
8. Press the blue button to toggle between your TV, Radio, Data/Other and All.
9. Press the CH LIST button to exit from the channel List
Displaying Programme Information
While viewing a channel, additional information about the
current programme may be displayed.
1. While viewing a programme, press the INFO button.
The programme information is displayed.
2. To exit from banner information, press the INFO button.
14:30 Set 1 Sep
AII Channels A
1 AFDO,16:9
14:30~14:33
AFDO 16:9
No Block
Contains video with AFD O; coded frame
SD
is 16:9
Stereo
Subtitle
English
MoveEnter
Return
Exit
English - 35
BN68-01169L-00Eng-0731.indd 35
2007-08-17 �� 3:38:51
Viewing the EPG (Electronic Programme Guide) Information
The EPG (Electronic Programme Guide) information is
provided by the broadcasters. Programme entries may
appear blank or out of date as a result of the information
broadcast on a given channel. The display will dynamically
update as soon as new information becomes available.
Now & Next Guide
For the six channels indicated in the left-hand column, displays the Current programme and the Next programme information.
Full Guide
Displays the programme information as time ordered One hour segments. Two hours of programme information is displayed which may be scrolled forwards or backwards
in time.
1. Press the D.MENU button to display the DTV menu.
2. Press the ENTER/OK button, to select "Guide".
3. Press the ▲ or ▼ button to select "Now & Next Guide" or
"Full Guide".
Press the ENTER/OK button.
You can also display the guide menu simply by pressing
the GUIDE button.
4.
To...
Then...
Watch a programme in the EPG list
• Select a programme by pressing
the , , ,  button.
Now & Next Guide
13:28 Wed 16 Feb
Extreme Machines: Armoured Cars
All Channels
INFO
Now
Watch
Full Guide
Next
Favourites
Full Guide
Exit
13:28 Wed 16 Feb
Extreme Machines: Armoured Cars
INFO
Today
Watch
13:00
Now/Next
Favourites
14:00
-24Hours
+24Hours
Exit
• Press the ENTER/OK button.
If the next program is selected, it is scheduled with the clock icon
displayed. If the ENTER/OK button is pressed again, the scheduling is
canceled with the clock icon gone. For details about scheduling
programmes, refer to the next page.
• Select a programme of your choice by
pressing the , , ,  button.
View programme information
• Press the INFO button when the
programme of your choice is
highlighted.
Toggle between the "Now & Next
Guide" or "Full Guide"
• Press the red button repeatedly.
Display the "Favourites" and the "All
Channels" list
• Press the green button repeatedly.
Scrolls backwards quickly (24 hours).
• Press the yellow button repeatedly.
Scrolls forward quickly (24 hours).
• Press the blue button repeatedly.
Exit the guide
• Press the EXIT button.
The programme title is on the upper part of the screen center. Please click on INFO button for
the detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video Quality Information(HD/SD), Sound Modes, Subtitle or Teletext, Languages of Subtitle or Teletext and brief summary of the highlighted programme are included on the detailed information. "..." will be
appeared if the summary is long.
Six channels are displayed. To scroll between channels, move to a channel using the ▲ or ▼ button. To display page by page, use the P or button.
English - 36
BN68-01169L-00Eng-0731.indd 36
2007-08-17 �� 3:38:51
Using the Scheduled List
If you make a scheduled viewing list of programs you may
like to see, the channel will be automatically switched to the
scheduled program at the scheduled time even if you are
watching another program.
1. Press the D.MENU button to display the DTV menu.
2. Press the ENTER/OK button, to select "Guide".
3. Press the ▲ or ▼ button to select "Scheduled List", then press the ENTER/OK button.
4. Press the red button.
The channel will be switched to the scheduled program.
5. Press the ENTER/OK button to select an item and adjust with the ▲ or ▼ button .
You can also set hour and minute by pressing the number buttons on the remote control.
• Channel: Set the channel.
• Time: Set the time.
• Date: Set Year, Month and Day.
• Frequency: Set the frequency.
("Once", "Daily" or "Weekly")
6. After setting the schedule, Press the red button.
7. Press the EXIT button to exit.
• Save: Save the adjusted schedule.
• Cancel: Cancel the adjusted schedule.
• Add Programme: Add a new schedule.
• Edit: Re-adjust the selected schedule.
• Delete: Delete the selected schedule.
Scheduled List
(No programmes)
Add Programme
Return
Scheduled List
Tuesday 22 Apr
15:30 ~ 16:00
Once
801 RaiTre
Add Programme
Move
Edit
Delete
Return
Scheduled List
Channel
802 RaiUno
Time
15 : 20 to -- : --
Date
Tue 22 Apr 2007
Frequency
Once
Save
Adjust
Cancel
Move
Return
Setting the Default Guide
You can preset the default guide style.
1. Press the D.MENU button to display the DTV menu.
2. Press the ENTER/OK button, to select "Guide".
3. Press the ▲ or ▼ button to select "Default Guide", then press
the ENTER/OK button.
4. Select "Now/Next" or "Full Guide" using the ▲ or ▼ button,
and press the ENTER/OK button.
5. Press the EXIT button to exit.
Guide
Now & Next Guide
Full Guide
Scheduled List
Default Guide :Full
Guide
Now/Next
Full Guide
MoveEnter
Move
Enter
Return
Return
You can select these options
by simply pressing the GUIDE
button on the remote control.
English - 37
BN68-01169L-00Eng-0731.indd 37
2007-08-17 �� 3:38:52
Viewing All Channels and Favourite Channels
In the EPG menu, you can display all channels or favourite
channels.
1. Press the D.MENU button to display the DTV menu.
2. Press the ENTER/OK button again, to select "Guide".
3. Select the your required guide ("Now & Next Guide" or "Full Guide") by pressing the ▲ or ▼ button.
4. Press the ENTER/OK button.
5. Press the green button.
All the channel lists and the favorite channel lists will be toggled.
6.Select a programme of your choice by pressing the ▲, ▼,
◄ or ► button.
7. Press the INFO button to display information about the highlighted programme.
8. When the Edit Favourite Channels list has not been set up:
• "The favourites list is empty.
Would you like to choose your favourites now?" message is displayed.
• Select "Yes".
The "Edit Favourite Channels" menu is displayed.
If you select "No", all channels will remain unchanged.
• To edit the favourite channels, refer to page 33 for more details.
9 . Press the EXIT button to exit.
"All Channels" is the list of channels that have been scanned by the channel list update.
All channels are displayed in the all channel mode.
"Favourites" (favourite channels) is the list of channels that has been set in the "Edit Favourite Channels" menu (refer to page 33).
Now & Next Guide
13:28 Wed 16 Feb
Extreme Machines: Armoured Cars
All Channels
INFO
Now
Watch
Full Guide
Next
Favourites
Full Guide
Exit
13:28 Wed 16 Feb
Extreme Machines: Armoured Cars
INFO
The favourites list is empty.
13:00
Would you like to choose your
favourites now?
Today
Yes
Watch
Now/Next
Favourites
14:00
No
-24Hours
+24Hours
Exit
Adjusting the Menu Transparency
You can set the transparency of the menu.
1. Press the D.MENU button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "Menu Transparency"
then press the ENTER/OK button.
4. Select the required option ("High", "Medium", "Low" or "Opaque") by pressing the ▲ or ▼ button and press the ENTER/OK button to change the setting.
5. Press the EXIT button to exit.
Setup
Menu Transparency :Medium
High
Change PIN
Medium
Parental Lock
Low
Subtitle :On
Opaque
Subtitle Mode :Normal
▼
Move
Enter
Return
English - 38
BN68-01169L-00Eng-0731.indd 38
2007-08-17 �� 3:38:53
Setting up the Parental Lock
This feature allows you to prevent unauthorized users, such
as children, from watching unsuitable programmes by a
4-digit PIN (Personal Identification Number) code that is
defined by the user. The on-screen menu will instruct you to
assign a PIN code (you can change it later, if necessary).
 Parental Lock
Setup
Menu Transparency :Medium
Change PIN
Parental Lock
:On
Subtitle Subtitle Mode :Normal
▼
MoveEnter
1. Press the D.MENU button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "Parental Lock.", then press the ENTER/OK button.
4. The "Enter PIN" is displayed.
5. Enter your current 4-digit PIN code by using the numeric buttons (0~9).
The default PIN code for a new TV set is 0000.
If you enter an invalid PIN code,the "Invalid PIN code. Please try again." message is displayed.
6.Press the ENTER/OK button again, to select "Parental
Rating".
7.Press the ▲ or ▼ button to select the age rating you want to
lock out. Press the ENTER/OK button.
 Change PIN
1. Press the D.MENU button to display the DTV menu.
2.Press the ▲ or ▼ button to select "Setup", then press the
ENTER/OK button.
3.Press the ▲ or ▼ button to select "Change PIN", then press
the ENTER/OK button.
The "Enter PIN" is displayed.
4. Enter your current 4-digit PIN code by using the numeric
buttons (0~9).
The "Enter New PIN" is displayed.
5. Enter your new PIN code by using the numeric buttons (0~9)
The "Confirm New PIN" is displayed.
6.Re-enter your new PIN code to confirm by using the numeric
buttons (0~9).
The Your PIN code has been changed successfully
message is displayed.
7.Press the ENTER/OK button.
8.Press the EXIT button to exit.
If you forget the PIN code, press the remote control
buttons in the following sequence, which resets the PIN to
0-0-0-0: POWER (Off), MUTE, 8, 2, 4, POWER (On).
Move
Enter





Return
Return
Parental Lock
Enter PIN
Enter PIN
Return
Parental Lock
▲
Parental Rating: No Block
Adult
No
Block
3
4
5
6
7
MoveEnter▼
Return
Move
Enter
Return
Setup
Menu Transparency :Medium
Change PIN
Parental Lock
:On
Subtitle Subtitle Mode :Normal
▼
MoveEnter
Move
Enter





Return
Return
Change PIN
Confirm New PIN
Your PIN code has been changed successfully.
OK
Enter PIN
Return
English - 39
BN68-01169L-00Eng-0731.indd 39
2007-08-17 �� 3:38:55
Setting the Subtitle
You can activate and deactivate the subtitles.
1. Press the D.MENU button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "Subtitle ", then press the ENTER/OK button.
4. Select "On" by pressing the ▲ or ▼ button. Press the ENTER/OK button.
5. Press the EXIT button to exit.
Setup
Menu Transparency :Medium
Change PIN
Parental Lock
Subtitle :On
Off
Subtitle Mode :Normal
On
▼
MoveEnter
Move
Enter
Return
Return
Setting the Subtitle Mode
Use this menu to set the Subtitle Mode. "Normal" under
the menu is the basic subtitle and "Hard of hearing" is the
subtitle for a hearing-impaired person.
1. Press the D.MENU button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
3.Press the ▲ or ▼ button to select "Subtitle Mode", then
press the ENTER/OK button.
4. Press the ▲ or ▼ button to select "Normal" or
"Hard of hearing". Press the ENTER/OK button.
5. Press the EXIT button to exit.
If the programme you are watching does not support the "Hard of hearing" function, "Normal" automatically activates even though "Hard of hearing" mode is selected.
Setup
Menu Transparency :Medium
Change PIN
Parental Lock
:On
Subtitle Subtitle Mode :Normal
Normal
▼
Hard of hearing
MoveEnter
Move
Enter
Return
Return
Selecting the Audio Format
You can only hear Dolby Digital sound through the audio
Setup

receiver connected through an optical cable. You can only

Audio Format : PCM
hear PCM sound through the main speaker.
: Enable 
Digital Text When sound is emitted from both the main speaker and the
Time Zone
audio receiver, a sound echo may occur due to the decoding
System

speed difference between the main speaker and the audio
receiver. In this case, use the internal mute function.
1. Press the D.MENU button to display the DTV menu.
Move
Enter
Return
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "Audio Format", then press the ENTER/OK button.
4. Press the ▲ or ▼ button to select "PCM" or "Dolby Digital". Press the ENTER/OK button.
5. Press the EXIT button to exit.
The Audio Format appears according to the broadcasting signal.
Dolby digital sound is only available when the TV is connected with an external speaker using an
optical cable.
English - 40
BN68-01169L-00Eng-0731.indd 40
2007-08-17 �� 3:38:55
Selecting the Digital Text
If the programme is broadcast with digital text, this feature is
Setup

enabled.
Audio Format : PCM
1. Press the D.MENU button to display the DTV menu.
Digital Text : Enable
Disable
Time Zone
Enable
2. Press the ▲ or ▼ button to select "Setup", then press the System
ENTER/OK button.
3. Press the ▲ or ▼ button to select "Digital Text", then press the ENTER/OK button.
Move
Enter
Return
4. Press the ▲ or ▼ button to select "Disable" or
"Enable". Press the ENTER/OK button.
5. Press the EXIT button to exit.
MHEG(Multimedia and Hypermedia Information Coding Experts Group) An International standard for data encoding systems used in multimedia and hypermedia. This is at a higher level than the MPEG system which includes data-linking hypermedia such as still images, character service, animation, graphic and video files as well as multimedia data. MHEG is user runtime interaction technology and is being applied to various fields including VOD (Video-On-Demand), ITV (Interactive TV), EC (Electronic Commerce), tele-education, tele-conferencing, digital libraries and network games.
Selecting the Time Zone (Spain only)
Select the time zone where locate
1. Press the D.MENU button.
2.
3.
4.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
Press the ▲ or ▼ button to select "Time Zone", then press the ENTER/OK button.
Select the time zone where you locate by pressing the
▲ or ▼ button.
Press the ENTER/OK button.
he following options are available
T
The Iberian Peninsula and Balears Islands Canarian Islands
5. Press the EXIT button to exit.
Viewing Product Information
You can view your product information. For service or
repair, please contact a Samsung approved dealer.
1. Press the D.MENU button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "System", then press the ENTER/OK button.
4. Press the ENTER/OK button again, to select "Product Information".
The Product Information menu is selected.
- Software Version, Firmware Version
5. Press the EXIT button to exit.
Setup

Audio Format : PCM
: Enable
Digital Text Time Zone
System
Move
Enter



Return
Time Zone
The Iberian Peninsula and Balears Islands
Canarian Islands
Adjust
Select
Return
Product Information
Software Version: T_JSM22DEUC_0003
Firmware Version: T_EMMA2DEUB_0101
Return
English - 41
BN68-01169L-00Eng-0731.indd 41
2007-08-17 �� 3:38:56
Checking the Signal Information
You can get information about the signal status.
1. Press the D.MENU button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "System", then press the ENTER/OK button.
4. Press the ▲ or ▼ button to select "Signal Information",
then press the ENTER/OK button.
5. Press the EXIT button to exit.
If the signal status is poor, the "No signal." message is displayed.
Signal Information
Service: ?
Service ID: 0000
Multiplex: ? (TSID 0000, ONID 0000)
Network: ? (ID 0000)
Bit error level:
Signal Strength:
10
0
MoveEnter
Return
Return
Upgrading the Software
To keep your product up-to-date with new Digital Television
features then software upgrades are periodically broadcast
as part of the normal Television signal.
It will automatically detect these signals and display the
software upgrade banner. You are given the option to install
the upgrade.
1. Press the D.MENU button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "System", then press the ENTER/OK button.
4. Press the ▲ or ▼ button to select "Software Upgrade",
then press the ENTER/OK button.
5. Press the ▲ or ▼ button to select "Software Information",
"Manual Upgrade" or "Satandby Mode upgrade".
Press the ENTER/OK button.
 Software Information
Press the ENTER/OK button, then the current software
version is shown. To display the software version
information, press the ENTER/OK button again.
To switch to an alternative version, press the red button.
Press the blue button to reset, activate the upgrade and restart.
 Manual Upgrade
Press the ENTER/OK button to search for new software
from the currently broadcasting channels.
 Standby Mode Upgrade : On/Off
Press the ENTER/OK button. To continue software
upgrade with master power on, Select On by pressing
the ▲ or ▼ button.
45 minutes after entering standby mode, a manual
upgrade is automatically conducted. Since the power
of the unit is turned on internally, the screen may be
on slightly for the LCD product. This phenomenon may
continue for more than 1 hour until the software upgrade
is completed.
6. Press the EXIT button to exit.
System
Product Information
Signal Information
Software Upgrade
Common Interface
Reset
Move




Enter
Return
Software Upgrade



Software Information
Manual Upgrade
Standby Mode upgrade : On
Move
Enter
Return
Software Upgrade



Software Information
Manual Upgrade
Standby Mode upgrade : On
Move
Enter
Return
Software Upgrade
Software Information
Manual Upgrade
Standby Mode upgrade : On
Move
Enter



Return
English - 42
BN68-01169L-00Eng-0731.indd 42
2007-08-17 �� 3:38:58
Viewing Common Interface
This contains information on CAM inserted in the CI slot and
displays it.
1. Press the D.MENU button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "System", then press the ENTER/OK button.
4. Press the ▲ or ▼ button to select "Common Interface",
then press the ENTER/OK button.
5. Press the ENTER/OK button to display the information for your application.
6. Press the EXIT button to exit.
The Application Info inserting is about the CI CARD.
You can install the CAM anytime whether the TV is ON or OFF.
1.Purchase the CI CAM module by visiting your nearest dealer or by phone.
2.Insert the CI CARD into the CAM in the direction of the arrow until it fits.
3.Insert the CAM with the CI CARD installed into the common interface slot.
(Insert the CAM in the direction of the arrow, right up to the end so that it is parallel with the slot.)
4. Check if you can see a picture on a scrambled signal channel.
Application Info
Type : CA
Manufacturer : Channel Plus
Info : Top Up TV
Return
Selecting the CI (Common Interface) Menu
This enables the user to select from the CAM-provided menu.
1. Press the D.MENU button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "System", then press the ENTER/OK button.
4. Press the ▲ or ▼ button to select "Common Interface",
then press the ENTER/OK button.
5. Select to "CI Menu" by pressing the ▲ or ▼ button and press the ENTER/OK button.
6.Select the required option by pressing the ▲ or ▼ button, and
press the ENTER/OK button.
7. Press the EXIT button to exit.
Select the CI Menu based on the menu PC Card.
CI Menu
Main menu
Module information
Smart card information
Language
Software Download
Press OK to select or Exit to quit
Move
Enter
Exit
English - 43
BN68-01169L-00Eng-0731.indd 43
2007-08-17 �� 3:38:58
Resetting
You can reset the values stored to the factory default
values.
The Reset operation deletes all channel information and
user preferences returning all values to their default factory state.
1. Press the D.MENU button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "System", then press the ENTER/OK button.
4. Press the ▲ or ▼ button to select "Reset", then press the ENTER/OK button.
5. The "Enter PIN" screen will appear.
6. Enter your current 4-digit PIN code by using the numeric buttons (0~9).
T
he warning message is displayed.All values will be
reset by pressing the coloured buttons (red, green,
yellow and blue)in turn.
7. Press the EXIT button to exit.
Reset
Enter PIN
Enter PIN
Return
Reset
WARNING: All channel settings and user
preferences will be lost and returned to
the factory defaults. It is recommended
that a reset is performed only when
serious problems are experienced.
Return
Selecting the Preferred Language (Subtitle, Audio or Teletext)
You can change the default value for subtitle, audio teletext
languages.
Displays the language information for the incoming stream.
1. Press the D.MENU button to display the DTV menu.
2. Press the ▲ or ▼ button to select "Language", then press
the ENTER/OK button.
3. Press the ▲ or ▼ button to select " Audio Language",
"Subtitle Language" or "Teletext Language".
Press the ENTER/OK button.
4. Select a particular language by pressing the ▲ or ▼ button repeatedly.
Press the ENTER/OK button.
English is the default in cases where the selected language is unavailable in the broadcast.
5. Press the EXIT button to exit.
While viewing a programme, the subtitle can be selected.
While viewing a programme, audio languages can be selected.
Language
Audio Language
Subtitle Language
Teletext Language
Preference 
Move
Enter
Return
Language
Audio Language
Subtitle Language
Teletext Language
Preference 
Move
Enter
Return
Language
Audio Language
Subtitle Language
Teletext Language
Preference 
Move
Enter
Return
English - 44
BN68-01169L-00Eng-0731.indd 44
2007-08-17 �� 3:39:00
Preference
This menu consists of 6 sub-menus:
Primary Subtitle Language, Secondary Subtitle Language,
Primary Audio Language, Secondary Audio Language,
Primary Teletext Language and Secondary Teletext Language.
Using this feature, users can select one of the languages
(English, German, Italian, Swedish, French, Welsh, Gaelic,
Irish, Danish, Finnish, Norwegian, Spanish, Czech and Greek).
The language selected here is the default when the user selects
a channel.
Language
Audio Language
Subtitle Language
Teletext Language
Preference 
MoveEnter
Move
Enter
Return
Return
 Press the ▲ or ▼ button to select required menu (Primary Subtitle Language, Secondary Subtitle
Language, Primary Audio Language, Secondary Audio Language, Primary Teletext Language or
Secondary Teletext Language), then press the ENTER/OK button. The options of the selected menu
are displayed.

Press the ▲ or ▼ button to select required option (English, German, Italian, Swedish, French,
Welsh, Gaelic, Irish, Danish, Finnish, Norwegian, Spanish, Czech or Greek), then press the
ENTER/OK button.
If you change the language setting, the Subtitle Language, Audio Language and the Teletext
Language of the Language menu (refer to page 44) are automatically changed to the selected
language.
The Subtitle Language, Audio Language and the Teletext Language of the Language menu show
a list of languages supported by the current channel and the selection is highlighted. If you change
this language setting, the new selection is only valid for the current channel. The changed setting
does not change the setting of the Primary Subtitle Language, Primary Audio Language or the
Primary Teletext Language of the Preference menu.
English - 45
BN68-01169L-00Eng-0731.indd 45
2007-08-17 �� 3:39:00
Teletext Feature
Most television stations provide written information services
via teletext. The index page of the teletext service gives you
information on how to use the service. In addition, you can
select various options to suit your requirements by using the
remote control buttons.
For teletext information to be displayed correctly, channel
reception must be stable. Otherwise, information may be
missing or some pages may not be displayed.
1 TV/DTV
Exit from the teletext display.
(index)
2
Used to display the index (contents) page at any time while
you are viewing teletext.
3
(teletext on/mix)
Press to activate teletext mode after selecting the channel
providing the teletext service. Press it twice to overlap the
teletext with the current broadcasting screen.
(size)
4
Press to display the double-size letters in the upper half of the
screen. For lower half of the screen, press it again. To display
normal screen, press it once again.
5
(mode)
Press to select the teletext mode (LIST/FLOF). If you press it
in the LIST mode, it switches into the List save mode. In the
List save mode, you can save teletext page into list using the
(store) button.
(sub-page)
6
Used to display the available sub-page.
(page up)
7
Used to display the next teletext page.
(page down)
8
Used to display the previous teletext page.
(cancel)
9
Used to display the broadcast when searching for a page.
(reveal)
0
Used to display the hidden text (answers to quiz games, for example). To display normal screen,
press it again.
! Coloured buttons (red/green/yellow/blue)
If the FASTEXT system is used by a broadcasting company, the different topics covered on a
teletext page are colour-coded and can be selected by pressing the coloured buttons. Press one
of them corresponding to the required. The page is displayed with other coloured information that
can be selected in the same way. To display the previous or next page, press the corresponding
coloured button.
(hold)
@
Used to hold the display on a given page if the selected
page is linked with several secondary pages which follow on
automatically. To resume, press it again.
#
(store)
Used to store the teletext pages.
You can change teletext pages by pressing the numeric buttons
on the remote control.
English - 46
BN68-01169L-00Eng-0731.indd 46
2007-08-17 �� 3:39:00
The teletext pages are organized according to six categories:
Part
A
B
C
D
E
F
Contents
Selected page number.
Broadcasting channel identity.
Current page number or search indications.
Date and time.
Text.
Status information.
FASTEXT information.
Teletext information is often divided between several pages
displayed in sequence, which can be accessed by:
Entering the page number
 Selecting a title in a list
 Selecting a coloured heading (FASTEXT system)
Press the TV/DTV button to exit from the teletext display.
Setting Up Your Remote Control
After it has been set up properly, your remote control can operate in five
different modes: TV, DVD, Cable, Set-Top Box, VCR. Pressing the corresponding button on the remote control allows you to switch between
these modes and control whichever piece of equipment you choose.
The remote control might not be compatible with all DVD Players,
VCRs, Cable boxes and Set-Top Boxes.
Setting Up the Remote to Operate Your VCR, CABLE, DVD and STB
1. Turn off your VCR, CABLE, DVD and STB.
2.Press the VCR, CABLE, DVD and STB button on your TV’s remote control.
3. Press the SET button on your TV’s remote control.
4.Using the number buttons on your remote control, enter three digits of the
VCR code listed on pages 48~50 of this manual for your brand of VCR.
Make sure you enter three digits of the code, even if the first digit is a "0".
(If more than one code is listed, try the first one.)
5. Press the POWER button on the remote control.
Your VCR should turn on if your remote is set up correctly.
If your VCR does not turn on after set up, repeat steps 2, 3 and 4, but try
one of the other codes listed for your brand of VCR.
If no other codes are listed, try each VCR code, 000 through 080.
English - 47
BN68-01169L-00Eng-0731.indd 47
2007-08-17 �� 3:39:00
Remote Control Codes
VCR
Brand
SAMSUNG
ADMIRAL
AIWA
AKAI
AUDIO DYNAMICS
BELL&HOWELL
BROKSONIC
CANDLE
CANON
CITIZEN
COLORTYME
CRAIG
CURTIS MATHES
DAEWOO
DB
DIMENSIA
DYNATECH
ELECTROHOME
EMERSON
FISHER
FUNAI
GENERAL ELECTRIC
GO VIDEO
HARMAN KARDON
HITACHI
INSTANT REPLAY
JC PENNEY
JCL
JVC
KENWOOD
KLH
KONIA
LG(Goldstar)
LIOYD
LOGIK
LXI
MAGNAVOX
MARANTZ
MARTA
MEI
MEMOREX
MGA
MIDLAND
MINOLTA
MITSUBISHI
Code
000 001 002 003 004 005 077 078 079
020
025
004 027 032
007 026
018
022
002 003 006 008 015 055
021 056
002 003 006 008 015 055
007
002 024
002 007 008 017 021 025 056 064 066
003 010 011 012 013 014 015 016
007 026
017
025
034
001 003 006 021 022 025 030 032 034 040
047 050 052 060 063 065 066 067 069 073
018 024 028 029 048 051 061
025
002 005 017 021 056
002
007
019 025 041 042 074
021
002 007 018 019 021 026 037 041 054 056
007 008 018 021 026 037
081 082 083
007 008 018 021 026 037
070
036
006 007 008 009 010
025
038
025
021 056 059
007 008 018 021 026 037 062
006
021
006 021 024 025
034
005
019 041 075
019 034 041 046
Brand
MONTGOMERY WARD
MTC
MULTITECH
NEC
OPTIMUS
ORION
PANASONIC
PENTAX
PENTEX
RESEARCH+
PHILCO
PHILIPS
PIONEER
PORTLAND
PROSCAN
QUARTZ
QUASAR
RADIO SHACK/
REALISTIC
RCA
SANSUI
SANYO
SCOTT
SEARS
SHARP
SHIMTOM
SIGNATURE
SONY
SYLVANIA
SYMPHONIC
TANDY
TASHIKA
TATUNG
TEAC
TECHNICS
TEKNIKA
TMK
TOSHIBA
TOTEVISION
UNITECH
VECTOR RESEARCH
VICTOR
VIDEO CONCEPTS
VIDEOSONIC
WARDS
YAMAHA
ZENITH
Code
020
002 025
002 005
007 008
020
073 074
021 056
019 041
008
021
021
019
015
017
018
021
006
025 038
018 026 037 062 064
075 076
071 072
075
056 059
080
026 039 053
049 055
056
018 020 021 024 025 029 034 048 056
002 017 019 021 035 041 043 057 068 076
026
018 024
003 047 052 067
006 018 019 024 028 029 041 048 051
020 034 045 015
027 033 038 058
025
027 033 044
021 025 056 059
025
018 025
006
037
025 037 068
021
006 021 025 031
066
003 019 029 051 052
002 006
002
007 026
026
007 026
002
002 003 006 019 020 021 024 025 034 038 041
007 008 018 026 037
023 027 033
English - 48
BN68-01169L-00Eng-0731.indd 48
2007-08-17 �� 3:39:01
CABLE BOX
Brand
SAMSUNG
GI
HAMLIN
HITACHI
JERROLD
MACOM
MAGNAVOX
OAK
PANASONIC
PHILIPS
PIONEER
RCA
REGAL
Code
000 001
041
003 024
025 030
038 039
025 030
019 023
026
003 022
019 021
004 018
014 022
003
Brand
REGENCY
SA
SCIENTIFIC ATLAN
SPRUCER
STARGATE 2000
SYLVANIA
TEXSCAN
TOCOM
UNIVERSAL
VIEWSTAR
WAMER AMEX
ZENITH
002 003 004 005 006 007
031
028
027 037 044
023 028
020 044
040
Code
015 023
042 043
042 043
022
036
016
016
032
033 034
019 021 023 028
046
017 029 035 037 045
SAMSUNG DVD
Product
DVD
DVDR
BD Record
VCR COMBO
VCR Record
DHR COMBO
Code
000 001 002
003 004
005 006
007 008 009 010 011
012
013
Product
Home Theater VCR COMBO
HDD Recorder COMBO
TWIN TRAY COMBO
STB DVD COMBO
DVD Receiver
AV Receiver
Code
030
075
085
072
070 071 074 086 083 084 088 111 112
114
062
074
122 123
027
077 078 079 082
080 125
081
065
095
066
146
067 068
090
060
061 089 133 135
069 074
074
064 113
071
073
091 110
089
Brand
INTEGRA
JBL
JVC
JATON
KENWOOD
KISS
KONKA
KLH
LG(Goldstar)
LOEWE
LASONIC
MOBILE
AUTHORITY
MEMOREX
MALATA
MAGNAVOX
MINTEK
MONYKA
NORCENT
NEXT BASE
NEC
NANTAUS
NESA
OPTOMEDIA
ELECTRONICS
OPTIVIEW
ONKYO
PHILCO
PRINCETON
PROSCAN
Code
014 015 016
017
018
019
020
021
DVD
Brand
ANAM
AUDIOVOX
AUDIOLOGIC
ANABA
APEX DIGITAL
AIWA
BROKSONIC
BLAUPUNKT
B&K
CURTIS MATHES
CYBER HOME
CLARION
CIRRUS
CYBER HOME
CINEVISION
DAEWOO
DENON
FARENHEIT
FISHER
GPX
GO VIDEO
GE
GREENHILL
HITACHI
HITEKER
HOYO
HARMAN / KARDON
IRT
Code
092
091
022 033 115 116
073
051 108 109
073
059 100 106 107
074 075
025 031
057
058
054
055
056
076 093
074 094
073
048 049 050
052
053
144
074
105
072
076 092 119
044 045
046 047
023
English - 49
BN68-01169L-00Eng-0731.indd 49
2007-08-17 �� 3:39:01
DVD
Brand
PANASONIC
PHILIPS
ROTEL
RIO
RCA
RAITE
ROWA
SAMPO
SONY
SHERWOOD
SVA
SYLVANIA
SHARP
SANSUI
SANYO
SHINSONIC
Code
024 034 124 134 136 137 138
036 076
117 118
120
023 035 074 075 131 132
073
038
104
026 029 126 127 128 129 130 141
039 041
042
043 093
140
062
062 090
094
Brand
THOMSON
TOSHIBA
TECHNICS
TVIEW
TOKAI
TEAC
TECHWOOD
TREDEX
URBAN CONCEPTS
VENTURER
VOCOPRO
YAMAHA
YAMAKAWA
XWAVE
ZENITH
Code
145
028 062 076
139
072
073
096
097
098 099 101
076
075
102
032 063
040 073
103
076 121
Brand
MAGNAVOX
MEMOREX
MOTOROLA
MACOM
MITSUBISHI
NEXT LEVEL
PHILIPS
Code
016 021
016
064
018
015
047 048
015 016
041 042
046 049
058 059
016
065 066
051 052
064
057
026
020 027
031
005 006
064
064
054 060
015 017
060 066
016 021
024 031
SAMSUNG SET-TOP BOX
Product
Ground wave STB
CABLE STB
Satellite STB
Code
000 001 002 008 013
000 004 008 013
000 003 008 013
SET-TOP BOX
Brand
ALPHASTAR
ANAM
CHANNEL
MASTER
CROSSDIGITAL
CHAPARRAL
DIRECT TV
DAEWOO
DISH NETWORK
SYSTEM
DISHPRO
DRAKE
DX ANTENNA
ECHOSTAR
EXPRESSVU
GOI
GE
GENERAL INSTRUMENT
HTS
HOME CABLE
HITACHI
HUGHES NETWORK
IQ
IQ PRISM
JANEIL
JERROID
JVC
LG(Goldstar)
Code
023
043
018 034
019
035
015 016 017 019 022 045 060 061 062
065 066 067 068
074
069 070
069
018
027
025
069
069
065
046
069
056
022
015
020
020
059
063
069
044
024 032
069 070 071
047 048 063 064
017
PRIMESTAR
PANASONIC
PAYSAT
PROSCAN
RCA
RADIOSHACK
REALISTIC
STAR TRAK
STS
SKY
SKY LIFE
SHACK
STAR CHOICE
SONY
TOSHIBA
ULTIMATE TV
UNIDEN
ZENITH
036 038 039 040 041 042
064
017 021 033 036 038 039 040
067
050 063
061 062
053 065 066
007
028 029 030 072
037 055 056 057
068
070
073
English - 50
BN68-01169L-00Eng-0731.indd 50
2007-08-17 �� 3:39:01
Setting up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The
actual screens on your PC may be different depending upon your particular
version of Windows and your particular video card. Even if your actual
screens look different, the same, basic set-up information will apply in almost
all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1. First, click on "Control Panel" on the Windows start menu.
2. When the control panel window appears, click on "Appearance and Themes" and a display dialog-box will appear.
3.When the control panel window appears, click on "Display" and a display dialog-box will appear.
4. Navigate to the "Settings" tab on the display dialog-box.
The correct size setting (resolution): Optimum- 1440 x 900
If a vertical-frequency option exists on your display settings dialog box, the correct value is
"60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.
Display Modes
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The resolutions in the table are recommended. (All resolutions between the supported limits are
supported)
D-Sub Input
Mode
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Pixel Clock
Frequency (MHz)
Sync Polarity
(H/V)
IBM
640×350
720×400
640×480
31.469
31.469
31.469
70.086
70.087
59.940
25.175
28.322
25.175
+/-/+
-/-
VESA
640×480
640×480
800×600
800×600
800×600
1024×768
1024×768
1024×768
1152×864
1152×864
1440×900
1440×900
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
53.783
67.500
55.935
70.635
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
59.959
75.000
59.887
74.984
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
81.750
108.000
106.500
136.750
-/-/+/+
+/+
+/+
-/-/+ /+
-/+
+/+
-/+
-/+
640×480
800×600
1024×768
35.000
43.750
57.672
70.000
70.000
72.000
28.560
45.500
78.434
-/+
-/+
-/-
Horizontal
Frequency (kHz)
31.469
31.469
31.469
37.879
48.364
55.935
70.635
Vertical
Frequency (Hz)
70.086
70.087
59.940
60.317
60.000
59.887
74.984
Pixel Clock
Frequency (MHz)
25.175
28.322
25.175
40.000
65.000
106.500
136.750
Sync Polarity
(H/V)
+/-/+
-/+/+
-/-/+
-/+
VESA GTF
HDMI/DVI Input
Mode
IBM
VESA
Resolution
640×350
720×400
640×480
800×600
1024×768
1440×900
1440×900
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
Separate and Composite modes are supported. SOG is not supported.
English - 51
BN68-01169L-00Eng-0731.indd 51
2007-08-17 �� 3:39:01
Setting the PC
Coarse and Fine Tuning of the Image (Image Lock):
The purpose of picture quality adjustment is to remove or
reduce picture noise.
If the noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (coarse) and Fine-tune
again.
After the noise has been reduced, re-adjust the picture so that
it is aligned on the center of screen.
TV
Image Lock
Coarse50
Fine54
1. Preset: Press the SOURCE button to select PC mode.
2. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
Move Enter
Return
3. Press the ▲ or ▼ button to select "PC", then press the ENTER/OK button.
4. Press the ENTER/OK button to select "Image Lock".
5. Press the ▲ or ▼ button to select "Coarse" or "Fine", then press the ENTER/OK button.
6. Press the ◄ or ► button to adjust the screen quality.
Press the ENTER/OK button.
7. Press the EXIT button to exit.
Changing the Image Position:
Adjust the PC’s screen positioning if it does not fit the TV
screen.
TV
Position
1. Follow the "Coarse and Fine Tuning of the Image
(Image Lock)"
instructions number 1 to 3.
2. Press the ▲ or ▼ button to select "Position", then press the ENTER/OK button.
3. Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the ◄ or ► button to adjust the Horizontal-Position.
Press the ENTER/OK button.
Move Enter
Return
4. Press the EXIT button to exit.
Adjusting the PC Screen Automatically (Auto Adjustment):
Auto adjustment allows the PC screen of set to self-adjust to
the incoming PC video signal. The values of fine, coarse and
position are adjusted automatically.
TV
1. Follow the "Coarse and Fine Tuning of the Image
(Image Lock)" instructions number 1 to 3.
PC
Image Lock
Position
Auto Adjustment
Image Reset
2. Press the ▲ or ▼ button to select "Auto Adjustment", then press the ENTER/OK button.
3. Press the EXIT button to exit.
Initializing the Image Settings (Image Reset):
You can replace all image settings with the factory default
values.
1. Follow the "Coarse and Fine Tuning of the Image
(Image Lock)" instructions number 1 to 3.
TV
Move Enter
Return
PC
Image Lock
Position
Auto Adjustment
Image Reset
2. Press the ▲ or ▼ button to select "Image Reset", then press the ENTER/OK button.
3. Press the EXIT button to exit.
Move Enter
Return
English - 52
BN68-01169L-00Eng-0731.indd 52
2007-08-17 �� 3:39:02
Setting the Home Theatre PC
You can view higher quality pictures by configuring the
screen settings in PC Mode.
If you set the "Home Theatre PC" function to On, you can
configure the "Detail Settings" (when Picture Mode is
set to Standard or Movie) as in PC Mode.
TV










PC

Home Theatre PC
:Off

Light Effect
:In Watching TV 
Energy Saving
:Off

HDMI Black
Level :Low

MoveEnter
Return
PIP

1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Home Theatre PC".
Press the ENTER/OK button.
Mode
:Custom
Setup
Equalizer
Plug & Play
:Off
SRS TS XT
Language
:English
Time
:Off
Auto Volume
Game
Mode
:Off
:Off
Internal
Mute
Blue Screen
:Off
Reset
Melody
:Medium
TV
3. Press the ▲ or ▼ button to select "Off" or "On".
Press the ENTER/OK button.
4. Press the EXIT button to exit.
Move Enter
Return
Mode
:Custom
Setup
Equalizer
Plug & Play
XT
:Off
SRS
TS
Language
:English
Time
:Off
Auto Volume
Game
Mode
:Off
:Off
Internal Mute
Blue Screen
:Off
Reset
Melody
:Medium





PC
Off
Home Theatre PC
:Off
On TV
Light Effect
:In Watching
Energy Saving
:Off
HDMI Black Level :Low
PIP
This function is available only in PC mode.
Move Enter
Return
How to Adjust the Stand
1.Place the front of the TV onto a soft cloth or
cushion on a table as in Figure (1).
- Align the TV bottom along the table edge.
2.Press on the center of the TV back. Adjust the
stand as in Figure (2) while pressing the button on
the back of the stand.
3.Place the TV on the table so that the TV sits safely.
Button
(1)
(2)
How to Adjust the Angle of the TV
(1) Angle adjustment when
using the TV on its stand.
(2) Angle adjustment when converting
from Stand to Wall mount (1 → 3, 3 → 1)
(3) Angle adjustment when LCD
TV is wall-mounted
When you adjust the stand, press the button on the back of the stand.
1.Figure (1) shows the adjustment angle (-2°~14°) when you use the LCD on its stand.
Excessive tilting can turn the LCD TV over which may cause damage.
2.Figure (2) shows the adjustment angle (14°~80°) when you convert the LCD from stand-based use
to wall-mount.
3.Figure (3) shows the adjustment angle (0°~10°) when you mount the LCD TV to a wall.
You will hear a “Click” sound when changing the angle from 1 to 2 or 3 to 2.
English - 53
BN68-01169L-00Eng-0731.indd 53
2007-08-17 �� 3:39:03
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount the TV on the wall. For the detailed information on
installing the Wall Mount, see the instruction in the Wall Mount items. Contact a technician for installing
the wall bracket. Samsung Electronics is not responsible for any damage to the product or injury to
yourself or others if you elect to install the TV on your own.
Do not install your Wall Mount Kit while your TV is on. This may result in personal injury due to
electric shock.
Installing VESA compliant mounting devices
1.Place the TV down on a soft cloth or cushion on a
table.
Button
Mounting pad
(sold separately)
2.Adjust the stand, pressing the button on the back of
the stand.
3.Align the mounting interface pad (not supplied) with
the holes in the stand bottom and secure it with the
four screws that come with the arm-type base, wall
mount hanger or other bases (not supplied).
(2)
(3)
Using the Decoration Covers
1.When installing the TV on the wall without using
the stand, insert decoration covers into the holes
as described in the picture (1).
2.After inserting the decoration covers, fasten them
with 4 screws as described in the picture (2).
(1)
(2)
English - 54
BN68-01169L-00Eng-0731.indd 54
2007-08-17 �� 3:39:03
Using the Anti-Theft Kensington Lock
The Kensington lock is a device used to physically fix the system when using it in a public place.
The locking device has to be purchased separately. The appearance and locking method may
differ from the illustration depending on the manufacturer. Please refer to the manual provided
with the Kensington lock for proper use.
1.
Insert the locking device into the Kensington slot on the LCD TV (Figure 1) and turn it
in the locking direction
(Figure 2).
2. Connect the Kensington lock cable.
3. Fix the Kensington lock to a
desk or a heavy stationary object.
Cable
DVI IN
AUDIO
Figure 2
PC IN
HDMI/DVI IN
AUDIO
EX-LINK
PC
AUDIO
VIDEO
AV IN
S-VIDEO
Figure 1
<Optional>
The place of the Kensington Lock may be
different depending on its model.
Troubleshooting: Before Contacting Service Personnel
No sound or picture
 Check that the mains lead has been connected to a wall socket.
 Check that you have pressed the button
on the front of the set.
 Check the picture contrast and brightness settings.
 Check the volume.
Normal picture but no
 Check the volume.
sound
 Check whether the MUTE button has been pressed on the remote control.
 Check if "Internal Mute" is off
Screen is black and power  On your computer check; Power, Signal Cable.
indicator light blinks steadily  The TV is using its power management system.
 Move the computer’s mouse or press any key on the keyboard.
No picture or black and
 Adjust the colour settings.
white picture
 Check that the broadcast system selected is correct.
Sound and picture
 Try to identify the electrical appliance that is affecting the set and move it interference
further away.
 Plug your set into a different mains socket.
Blurred or snowy picture,
 Check the direction, location and connections of your aerial.
distorted sound
This interference is often due to the use of an indoor aerial.
Remote control malfunctions  Replace the remote control batteries.
 Clean the upper edge of the remote control (transmission window).
 Check the battery terminals.
"Check signal cable."
 Check that the signal cable is firmly connected to the PC or video sources.
message is displayed.
 Check that the PC or video sources are turned on.
On PC mode, "Not Sup Check the maximum resolution and the frequency of the video adaptor.
ported Mode." message is
 Compare these values with the data in the Display Modes.
displayed.
The TFT LCD panel uses a panel consisting of sub pixels (3 888 000) which require sophisticated
technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will
have no impact on the performance of the product.
English - 55
BN68-01169L-00Eng-0731.indd 55
2007-08-17 �� 3:39:04
Technical and Environmental Specifications
Model Name
Screen Size (Diagonal)
PC Resolution
Sound
Output
Dimension (WxDxH)
Body
With stand
Weight
With stand
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
LE19R8
19 inch
1440 x 900 @ 60 Hz
3W x 2
480 x 58 x 361 mm
480 X 180 X 393 mm
5 kg
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
For the power supply and Power Consumption, refer to the label attached to the product.
English - 56
BN68-01169L-00Eng-0731.indd 56
2007-08-17 �� 3:39:04
Warning! Important Safety Instructions
Please read the appropriate section that corresponds to the marking on your Samsung product before
attempting to install the product.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). THERE ARE
NO USER SERVICEABLE PARTS INSIDE. REFER ALL
SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high voltage is
present inside. It is dangerous to make any
kind of contact with any internal part of this
product.
This symbol alerts you that important literature
concerning operation and maintenance has
been included with this product.
• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation.
To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never
be blocked or covered.
- Do not cover the slots and openings with a cloth or other materials.
- Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.
-Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is
provided.
- Give your product 10 cm (4 inch) clearance from the wall.
• Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed to direct sunlight.
• Do not place heat generating items such as candles, ashtrays, incense, flammable gas or explosive materials near the
product.
• Do not place a water containing vessel on this apparatus, as this can result in a risk of fire or electric shock.
• Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or laundry tub,
in a wet basement, or near a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an
authorized dealer immediately. Make sure to pull out the power cord from the outlet before cleaning.
• This apparatus use batteries. In your community there might be regulations that require you to dispose of these
batteries properly under environmental considerations. Please contact your local authorities for disposal or recycling
information.
• Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric
shock.
• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them,
paying particular attention to cords at plug end, adaptors and the point where they exit from the appliance.
• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable system.
This will prevent damage to the set due to lightning and power line surges.
• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor
corresponds to the local electrical supply.
• Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger of electric shock.
• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this
apparatus.
• Make sure to plug the power cord in until it is firmly inserted. When removing the power cord, make sure to hold the
power plug when pulling the plug from the outlet. Do not touch the power cord with wet hands.
• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it
- unplug it immediately and contact an authorized dealer or service center.
• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an
extended period of time (especially when children, elderly or disabled people will be left alone in the house).
-Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord to generate
sparks and heat or the insulation to deteriorate.
• Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low
temperatures,high humidity, chemical substances and where it operates for 24 hours such as the airport, the train
station etc. Failure to do so may cause serious damage to your set.
• Use only a properly grounded plug and receptacle.
- An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains
plug shall be readily operable.
• Do not allow children to hang onto the product.
• Store the accessories (battery, etc.) in a location safely out of the reach of children.
• Do not install the product in an unstable location such as a shaky self, a slanted floor or a location exposed to vibration.
• Do not drop or impart any shock to the product. If the product is damaged, disconnect the power cord and contact a
service center.
•
WARNING - TO PREVENT THE SPREAD OF FIRE,
KEEP CANDLES OR OTHER OPEN FLAMES
AWAY FROM THIS PRODUCT AT ALL TIMES.
BN68-01169L-00Eng-0731.indd 57
2007-08-17 �� 3:39:04
Wiring the Mains Power Supply Plug (UK Only)
IMPORTANT NOTICE
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is
indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating
must be used.
Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required,
it must be of the same colour as the pin face of the plug. Replacement covers are available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach
a power point, you should obtain a suitabl y approved extension lead or consult your dealer for assistance.
However, if there is no alternative but to cut off the plug, remove the fuse and then safely dispose of the plug.
Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
BLUE - NEUTRAL BROWN - LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as
follows :
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or
BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured
BROWN or RED.
WARNING:
DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE
LETTER E OR BY THE EARTH SYMBOL
, OR COLOURED GREEN OR GREEN AND YELLOW.
Warranty Card
United Kingdom
This Samsung product is warranted for a period of twelve (12) months from the original date of purchase, against
defective materials and workmanship. In the event that warranty service is required, you should return the
product to the retailer from whom it was purchased. However, Samsung Authorised Dealers and Authorised
Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the
country concerned. In case of difficulty, details of our Authorised Service Centres are available from:
Samsung Electronics U.K. Ltd.
Customer Care Centre
PO Box 17243
Edinburgh, EH11 4YB
United Kingdom
Tel: 0870 SAMSUNG (7267864)(UK & Northern Ireland)
Tel: 0818 717 100 (Republic of Ireland Only)
Fax: +44 (0)870 7221127
Web : www.samsung.com/uk
WARRANTY CONDITIONS
1. The warranty is only valid if, when warranty service is required, the warranty card is fully and properly
completed and is presented with the original invoice or sales slip or confirmation, and the serial number on the product has not been defaced.
2. Samsung’s obligations are limited to the repair or, at its discretion, replacement of the product or the
defective part.
3. Warranty repairs must be carried out by Authorised Samsung Dealers or Authorised Service Centres.
No re-imbursement will be made for repairs carried out by non Samsung Dealers and, any such repair work and damage to the products caused by such repair work will not be covered by this warranty.
4. This product is not considered to be defective in materials nor workmanship by reason that it requires
adaptation in order to conform to national or local technical or safety standards in force in any Country other than the one for which the product was originally designed and manufactured.
BN68-01169L-00Eng-0731.indd 58
2007-08-17 �� 3:39:04
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at
the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material
resources. Household users should contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take this item for environmentally safe recycling. Business users
should contact their supplier and check the terms and conditions of the purchase contract. This product should not be
mixed with other commercial wastes for disposal.
BN68-01169L-00Eng-0731.indd 59
2007-08-17 �� 3:39:04
Download PDF

advertising