Samsung | LA46A750R1R | Samsung LA46A750R1R Benutzerhandbuch

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Country
Customer Care Centre
Web Site
AUSTRALIA
CHINA
1300 362 603
800-810-5858
400-810-5858
010-6475 1880
HONG KONG:3698 - 4698
3030 8282
1-800-3000-8282
1800 110011
0800-112-8888
0120-327-527
1800-88-9999
0800 SAMSUNG (0800 726 786)
1800-10-SAMSUNG(726-7864)
1800-SAMSUNG(726-7864)
1800-29-3232
02-689-3232
0800-329-999
1 800 588 889
0860-SAMSUNG(726-7864 )
800-SAMSUNG (726-7864)
8000-4726
www.samsung.com/au
www.samsung.com/cn
INDIA
INDONESIA
JAPAN
MALAYSIA
NEW ZEALAND
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
SOUTH AFRICA
U.A.E
www.samsung.com/hk
www.samsung.com/in
www.samsung.com/id
www.samsung.com/jp
www.samsung.com/my
www.samsung.com/nz
www.samsung.com/ph
www.samsung.com/sg
www.samsung.com/th
LCD TV
user manual
www.samsung.com/tw
www.samsung.com/vn
www.samsung.com/za
www.samsung.com/ae
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/global/register
Model
Serial No.
BN68-01717L-00
BN68-01717L.indb 1
2008-08-18 �� 6:13:15
Without producing harmful VOC (Volatile Organic Compounds),
Samsung’s Eco-friendly “Crystal Design” expresses color gradation
thanks to our dual injection technology.
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also
known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still
image.
• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of
the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect
to the screen. Damages caused by the above effect are not covered by the Warranty.
• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
BN68-01717L.indb 2
2008-08-18 �� 6:13:15
Contents
Connecting and Preparing Your TV
 List of Parts......................................................... 2
 Installing the Wall Mount Kit................................ 2
 Viewing the Control Panel................................... 3
 Viewing the Connection Panel............................ 4
 Viewing the Remote Control................................ 6
 Installing Batteries in the Remote Control........... 7
 Switching On and Off.......................................... 7
 Placing Your Television in Standby Mode........... 7
 Viewing the Menus.............................................. 8
 Using the TOOLS Button..................................... 8
 Plug & Play.......................................................... 9
Setting the Channels
 Storing Channels Automatically........................ 10
 Storing Channels Manually................................11
 Adding / Locking Channels............................... 12
 Sorting the Stored Channels............................. 13
 Assigning Channels Names.............................. 13
 Fine Tuning Channel Reception........................ 14
Setting the Picture
 Changing the Picture Standard......................... 15
 Adjusting the Custom Picture............................ 16
 Configuring Detailed Settings on the Picture.... 16
 Configuring Picture Option................................ 18
 Resetting the Picture Settings to the Factory
Defaults............................................................. 19
 Viewing the Picture In Picture (PIP).................. 20
Setting the PC
 Setting up Your PC Software
(Based on Windows XP)................................... 33
 Display Modes................................................... 33
 Setting up the TV with your PC......................... 34
WISELINK Pro
 Connecting a USB Device................................. 35
 Using the WISELINK Pro Function................... 36
 Using and Sorting Photo List............................. 38
 Viewing a Photo or Slide Show ........................ 40
 Using and Sorting the Music List....................... 42
 Playing a Music ................................................ 44
 Using and Sorting the Movie List...................... 45
 Playing a Movie File ......................................... 46
 Deleting the Photo/Music/Movie File . .............. 49
 Using the Setup Menu....................................... 49
WISELINK Pro-DLNA
 Setting the DLNA Network................................ 50
 Installing the DLNA Application......................... 50
 Using the DLNA Application.............................. 52
 Using the DLNA Function.................................. 56
Content Library
 Activating the Content Library........................... 57
 Using the Content Library................................. 58
 Using Additional Content Using External
USB Memory Storage....................................... 59
About Anynet+
Setting the Sound
 Sound Features................................................. 21
 Selecting the Sound Mode................................ 22
 Connecting Headphones (Sold separately)...... 22
Setting the Time
 Setting and Displaying the Current Time........... 23
 Setting the Sleep Timer..................................... 23
 Switching the Television On and Off
Automatically..................................................... 24
Function Description
 Choosing Your Language.................................. 24
 Melody / Entertainment / Energy Saving . ........ 25
Network Settings
 Network Connection.......................................... 27
 Cable Network Setup........................................ 29
 Selecting the Source......................................... 30
 Editing the Input Source Names....................... 31
 Product Guide................................................... 32
 What is Anynet+? ............................................. 61
 Connecting Anynet+ Devices............................ 61
 Setting Up Anynet+........................................... 62
 Scanning and Switching between Anynet+
Devices............................................................. 63
 Recording.......................................................... 65
 Listening through a Receiver............................ 65
 Check Points before Requesting Service.......... 66
Recommendations For Use
 Teletext Feature................................................ 67
 Auto Wall-Mount (Sold separately)
(depending on the model)................................. 69
 Using the Anti-Theft Kensington Lock
(depending on the model)................................. 70
 Securing the TV to the Wall............................... 71
 Troubleshooting: Before Contacting
Service Personnel............................................. 72
 Specifications.................................................... 73
Symbol
Press
Note
One-Touch
Button
English - 1
BN68-01717L.indb 1
2008-08-18 �� 6:13:16
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
Remote Control &
Batteries (AAA x 2)
• Owner’s Instructions
➣
Power Cord
Program CD
• Warranty card
Cover-Bottom
• Safety Guide
Cleaning Cloth
• Registration Cards
Warranty card / Safety Guide / Registration Cards (Not available in all locations)
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount
the TV on the wall.
For detailed information on installing the wall mount,
see the instructions provided with the Wall Mount items.
Contact a technician for assistance when installing the
wall mounted bracket.
Samsung Electronics is not responsible for any damage
to the product or injury to yourself or others if you elect to
install the TV on your own.
Do not install your Wall Mount Kit while your TV is
turned on. It may result in personal injury due to
electric shock.
➣ Remove the stand and cover the bottom hole with a
cap and fasten with two screws.
English - BN68-01717L.indb 2
2008-08-18 �� 6:13:17
Viewing the Control Panel
1
2
3
4
5
6
8
78
Front Panel buttons
Touch each button to
operate.
➣
The product colour and shape may vary depending on the model.
1 SOURCE
Toggles between all the available input sources
(TV, AV1, AV2, S-Video, Component1, Component2, PC, HDMI1, HDMI2, HDMI3,
HDMI4). In the on-screen menu, use this button
as you use the ENTER button on the remote
control.
2 MENU
Press to see an on-screen menu of your TV’s features.
5 Power Indicator
Blinks and turns off when the power is on and
lights up in stand-by mode.
3 - VOL +
Press to decrease or increase the volume.
In the on-screen menu, use the - VOL + buttons
as you use the ◄ and ► buttons on the remote
control.
4
Press to change channels.
In the on-screen menu, use the
buttons as you use the ▼ and ▲ buttons on the remote control.
(Without the Remote Control, you can turn on the TV by using the Channel buttons.)
8 Speakers
6
Power
Press to turn the TV on and off.
7 Remote Control Sensor
Aim the remote control towards this spot on the TV.
English - BN68-01717L.indb 3
2008-08-18 �� 6:13:17
Viewing the Connection Panel
[Side Panel Jacks]
1
2
3
4
5
3
6
7
8
@
!
0
Power Input
9
The product colour and shape may vary depending on the model.
➣
➣
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
1 PC IN [PC] / [AUDIO]
- Connect to the video and audio output jack on your PC.
2 Connecting External A/V Devices (AV IN 1)
- Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to [R - AUDIO - L] on the rear of your set and the other ends to
corresponding audio out connectors on the A/V device.
3HDMI IN 1, HDMI IN 2, HDMI IN 3, HDMI IN 4
- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)
- No additional Audio connection is needed for an HDMI to HDMI connection.
- When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
➣ What is HDMI?
- “High Definition Multimedia interface” allows the transmission of high definition digital video data
and multiple channels of digital audio.
- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate
cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller
in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and
supports multi - channel digital audio.
➣ The TV may not output sound and pictures may be displayed with abnormal colour when DVD
players/Cable Boxes/Satellite receivers supporting HDMI versions older than 1.3 are connected.
When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the
HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO-L] jacks on the back of
the TV. If this happens, contact the company that provided the DVD player/Cable Box/Satellite
receiver to confirm the HDMI version, then request a firmware update. HDMI cables that are not
1.3 may cause annoying flicker or no screen display.
English - BN68-01717L.indb 4
2008-08-18 �� 6:13:17
DVI IN(HDMI2) [R-AUDIO-L]
- DVI audio outputs for external devices.
➣ Supported modes for HDMI/DVI and Component
HDMI/DVI 50Hz
HDMI/DVI 60Hz
Component
480i
480p
576i
576p
720p
1080i
1080p
X
X
O
X
O
O
X
X
O
O
X
O
O
O
O
O
O
O
O
O
O
4 ANT IN
To view television channels correctly, a signal must be received by the set from one of the following
sources:
- An outdoor aerial / A cable television network / A satellite network
5 SERVICE
Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing
angle using your remote control.
6 WISELINK
- Connect a USB mass storage device to view movies and photos and listen to music files.
7 S-VIDEO or VIDEO / R-AUDIO-L
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or
Camcorder.
- Connect RCA audio cables to [R-AUDIO-L] on your set and the other ends to corresponding audio out
connectors on the A/V device.
8 Headphones jack
- Headphone may be connected to the headphone output on your set. While the head phone is
connected, the sound from the built-in speakers will be disabled.
9 AUDIO OUT [R-AUDIO-L]
- Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to
corresponding audio in connectors on the Amplifier or DVD Home Theatre.
0 COMPONENT IN 1,2
- Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of your
set and the other ends to corresponding component video out connectors on the DVD.
- If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD
and connect the DVD to component connector ("PR", "PB", "Y") on your set.
- The PR, PB and Y connectors on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y
or Y, Cb and Cr.
- Connect RCA audio cables (optional) to [R - AUDIO - L] on the rear of your set and the other ends to
corresponding audio out connectors on the DVD.
! LAN
- Connect a LAN cable to this port to connect to the Network.
@Kensington Lock (depending on the model)
- The Kensington Lock (optional) is a device used to physically fix the system when used in a public
place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The location of the kensington lock may be different depending on its model.
English - BN68-01717L.indb 5
2008-08-18 �� 6:13:18
Viewing the Remote Control
1 Television Standby button
2Selects the TV mode
directly
3 Number buttons for direct
channel access
4 One/Two-digit channel
selection
5 + : Volume increase
– : Volume decrease
6Available source selection
7 It display "Channel List"
on the screen.
8 Use to quickly select
frequently used functions.
9 Use to see information on the current broadcast
0Colour buttons :
Use these buttons in
the Channel list and
WISELINK, etc.
@ Press to select the optional
display and sound modes
for sports, cinema and
games.
# Use these buttons in
the DMA, WISELINK
and Anynet+. (
: This
remote can be used
to control recording on
Samsung recorders with
the Anynet+ feature)
$ Press to backlight the
buttons on the remote.
This function is convenient
for using at night or when
the room is dark. (Using
the remote control with the
ON/OFF
light button
set to On will reduce the
battery usage time.)
% Previous channel
^ Temporary sound switchoff
& P : Next channel
P : Previous channel
➣
* Displays the main onscreen menu
(This function enables you
to view and play photo
and music files from an
external device.
) Returns to the previous
menu
a Control the cursor in
the menu. Use wheel
button in the Content
Library,WISELINK Pro,
Product Guide menus.
b Exit the on-screen menu
c Picture effect selection
d Picture size selection
e Selects the HDMI mode
directly.
f This function enables you
to view “Content Library”.
Teletext Functions
2Exit from the teletext
display
6Teletext mode selection (LIST/FLOF)
7Teletext store
8Teletext size selection
9Teletext reveal
0Fastext topic selection
!Alternately select Teletext, Double, or Mix.
%Teletext sub page
&P : Teletext next page
P : Teletext previous
page
*Teletext index
)Teletext hold
bTeletext cancel
The performance of the remote control may be affected by bright light.
English - BN68-01717L.indb 6
2008-08-18 �� 6:13:18
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the figure.
2. Install two AAA size batteries.
➣ Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment.
3. Replace the cover.
➣ Remove the batteries and store them in a cool, dry place if you won’t be
using the remote control for a long time.
➣ Using the remote control with the ON/OFF
light button set to On will
reduce the battery usage time.
➣
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
Switching On and Off
The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
➣ The standby indicator lights up on your set.
2. Press the P button on your set.
➣ You also can press the POWERP button or the TV button on the remote control to turn the TV
on.
➣ The programme that you were watching last is reselected automatically.
3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or
button on your set.
➣ When you switch the set on for the very first time, you will be asked to choose language in which the
menus are to be displayed.
4. To switch your set off, press the POWERP button again.
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby
mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWERP button on the remote control.
➣ The screen is turned off and a red standby indicator appears on your set.
2. To switch your set back on, simply press the POWERP, numeric buttons (0~9), TV button or channel
up/down ( / ) button again.
➣ Do not leave your set in standby mode for long periods of time (when you are away on holiday, for
example).
It is best to unplug the set from the mains and aerial. English - BN68-01717L.indb 7
2008-08-18 �� 6:13:18
Viewing the Menus
1. With the power on, press the MENU button.
The main menu appears on the screen. The menu’ s left side has
icons: Picture, Sound, Channel, Setup, Input.
2. Press the ▲ or ▼ button to select one of the icons.
Then press the ENTER button to access the icon’s sub-menu.
3. Press the EXIT button to exit.
➣ The on-screen menus disappear from the screen after about
one minute.
TV
Picture
Mode
:Standard 
Backlight7
Contrast 95
Brightness 40
Sharpness 50
Colour 50
Tint
G50
R50
Detailed Settings 
sMore
Move Enter
Return
Using the TOOLS Button
You can use the TOOLS button to select your frequently
used functions quickly and easily. The “Tools” menu change
depending on which external input mode you are viewing.
1. Press the TOOLS button.
The “Tools” menu will appear.
2. Press the ▲ or ▼ button to select a menu.
3. Press the ▲/▼/◄/►/ENTER buttons to display, change, or
use the selected items. For a more detailed description of each
function, refer to the corresponding page.
Tools
Anynet+ (HDMI-CEC)
Picture Mode Sound Mode Sleep Timer SRS TS XT
Energy Saving Dual l-ll Move : Standard
: Custom
:
Off
:
Off
:
Off
:
Mono
Enter
Exit
♦ Anynet+ (HDMI-CEC), see page 62
♦ Picture Mode, see page 15
♦ Sound Mode, see page 21
♦ Sleep Timer, see page 23
♦ SRS TS XT, see page 21
♦ Energy Saving, see page 26
♦ Dual l-ll, see page 22
♦ PIP, see page 20
♦ Auto Adjustment, see page 34
English - BN68-01717L.indb 8
2008-08-18 �� 6:13:19
Plug & Play
When the TV is initially powered on, several basic settings
proceed automatically and subsequently. The following
settings are available.
Plug & Play
Start Plug & Play.
1. Press the POWER button on the remote control.
The message "Start Plug & Play" is displayed with "OK" selected.
OK
2. Select the appropriate language by pressing the ▲ or ▼ button.
Press the ENTER button to confirm your choice.
Enter
3. Press the ◄ or ► button to select “Store Demo” or “Home Use”,
then the ENTER button.
➣ We recommend setting the TV to "Home Use" mode for the best picture in your home
environment.
➣ "Store Demo" mode is only intended for use in retail environments.
➣ If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use”
(Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and
hold the MENU button on the TV for 5 seconds.
4. The message "Check antenna input." is displayed with "OK" selected.
Press the ENTER button.
➣ Please check that the antenna cable is connected correctly.
5. Select the appropriate area by pressing the▲ or ▼ button.
Press the ENTER button to confirm your choice.
6. The "Auto Store" menu is displayed with the "Start" selected. Press the ENTER button.
➣ The channel search will start and end automatically.
➣ Press the ENTER button at any time to interrupt the memorization process.
➣ After all the available channels are stored, the "Clock Set" menu appears.
7. Press the ENTER button.
Select the "Month", "Day" , "Year", "Hour", "Minute", or "am/pm" by pressing the ◄ or ► button.
Set the "Month", "Day" , "Year", "Hour", "Minute", or "am/pm" by pressing the ▲ or ▼ button.
➣ You can also set the “Month”, “Day”, “Year”, “Hour” and "Minute" by pressing the number buttons
on the remote control.
8.Press the ENTER button to confirm your setting. The message “Enjoy your viewing” is displayed.
When you have finished, press the ENTER button.
➣ Even if the ENTER button is not pressed, the message will automatically disappear after
several seconds.
♦ Language: Select your language.
♦ Area: Select your area.
♦ Auto Store: Automatically scans for and stores channels available in the local area.
♦ Clock Set: Sets the current time for the TV clock.
English - BN68-01717L.indb 9
2008-08-18 �� 6:13:19
If you want to reset this feature...
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER button.
2. Press the ENTER button again, to select "Plug & Play".
For further details on setting up options, refer to the page 9.
➣ The “Plug & Play” feature is only available in the TV mode.
TV
Setup
Plug & Play 
Language
:English 
Time 
Cable Network Setup 
Auto Wall-Mount 
Melody
: Off 
Entertainment : Off 
Energy Saving : Off 
PIP 
Move Enter
Return
Plug & Play
Start Plug & Play.
OK
Enter
Return
Enter
Return
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability depends on your area).
Automatically allocated programme numbers may not correspond to actual or desired programme
numbers. However, you can sort numbers manually and clear any channels you do not wish to
watch.
Channel
TV
1. Press the MENU button to display the menu.
Area
:Asia/W.Europe 
Press the ▲ or ▼ button to select "Channel", then press the
Auto Store 
Manual Store 
ENTER button.
Channel Manager 
2. Press the ENTER button to select "Area".
Sort 
Name 
3. Select the appropriate area by pressing the ▲ or ▼ button.
Fine Tune 
Press the ENTER button to confirm your choice.
4. Press the ▲ or ▼ button to select "Auto Store", then press the
Move Enter
Return
ENTER button.
5. Press the ENTER button.
➣ The TV will begin memorizing all of the available channels.
➣ Press the ENTER button at any time to interrupt the memorization process and return to the "Channel" menu.
6. After all the available channels are stored, the "Sort" menu appears. (refer to page 13)
English - 10
BN68-01717L.indb 10
2008-08-18 �� 6:13:20
Storing Channels Manually
You can store television channels, including those received via
cable networks.
When storing channels manually, you can choose:
♦ Whether or not to store each of the channels found.
♦ The programme number of each stored channel which you wish
to identify.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
2.Press the ▲ or ▼ button to select "Manual Store", then press
the ENTER button.
3.Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
4.When you are satisfied with your setting, press the
ENTER button.
5. Press the EXIT button to exit.
Channel
TV
Area
:Asia/W.Europe
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move TV
Enter







Return
Manual Store
Programme Colour System Sound System Channel Search Store Move :P2
: Auto 
: BG 
:C3
: 77 MHz
:?
Enter
♦ Programme (Programme number to be assigned to a channel)
- Press the ▲ or ▼ button until you find the correct number.
➣ You can also select the channel number directly by pressing the numeric buttons (0~9).
Return
♦ Colour System: Auto/PAL/SECAM/NTSC4.43/NTSC3.58
- Press the ▲ or ▼ button to select the required colour standard.
♦ Sound System: BG/DK/I/M
- Press the ▲ or ▼ button to select the required sound standard.
hannel (When you know the number of the channel to be stored)
♦ C
- Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).
- Press the ► button, then press the ▲ or ▼ button to select the required number.
➣ You can also select the channel number directly by pressing the numeric buttons (0~9).
➣ If there is abnormal sound or no sound, re-select the sound standard required.
♦ Search (When you do not know the channel numbers)
- Press the ▲ or ▼ button to start the search.
- The tuner scans the frequency range until the first channel or the channel that you selected is
received on the screen.
♦ Store (When you store the channel and associated programme number)
- Set to "OK" by pressing the ENTER button.
➣ Channel mode
P (Programme mode): When completing tuning, the broadcasting stations in your area have been
- assigned to position numbers from P00 to P99. You can select a channel by entering the position
number in this mode.
C (Air channel mode): You can select a channel by entering the assigned number to each air
- broadcasting station in this mode.
- S (Cable channel mode): You can select a channel by entering the assigned number for each cable
channel in this mode.
English - 11
BN68-01717L.indb 11
2008-08-18 �� 6:13:21
Adding / Locking Channels
Using the Channel Manager, you can conveniently lock or add
channels.
Area
:Asia/W.Europe
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Channel Manager", then
press the ENTER button.
♦ Adding channels
Using the Channel List, you can add channels.
3. Select Channel List by pressing the ENTER button.
4.Move to the ( ) field by pressing the ▲, ▼, ◄ or ►
button, select a channel to be added, and press the
ENTER button to add the channel.
➣ If you press the ENTER button again, the ( ) symbol
next to the channel disappears and the channel is not
added.
➣ “ ” is active when "Child Lock" is selected to "On".
♦ Locking channels
This feature allows you to prevent unauthorized users, such as
children, from watching unsuitable programmes by muting out
video and audio.
Channel
TV
TV
Move Enter







Return
Channel Manager
Channel List 
Child Lock
: Off 
Move Enter
Return
Channel List
P 1 C3
1 / 10
Prog.
0 C-5. Press the ▲ or ▼ button to select "Child Lock", then press the
1 C3
ENTER button.
2 BBC 1
6.Select "On" by pressing the ▲ or ▼ button, then press the
3 C74
ENTER button.
4 C75
7. Press the ▲ or ▼ button to select "Channel List", then press
5 C76
the ENTER button.
6 S3
8.Move to the ( ) field by pressing the ▲, ▼, ◄ or ► button,
7 S4
select a channel to be locked, and press the ENTER
8 S6
button.
9 S7
➣ If you press the ENTER button again, the ( ) symbol
Add
Lock
next to the channel disappears and the channel lock is
Move
Enter
cancelled.
➣ A blue screen is displayed when "Child Lock" is activated.
Page
Return
9. Press the EXIT button to exit.
➣ Select "On" or "Off" in "Child Lock" to easily turn the channels which selected on " " to be active
or inactive.
You can select these options by simply pressing the CH LIST button on the remote control.
English - 12
BN68-01717L.indb 12
2008-08-18 �� 6:13:22
Sorting the Stored Channels
This operation allows you to change the programme numbers
of the stored channels.
This operation may be necessary after using the auto store.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Sort", then press the ENTER button.
3. Select the channel number that you wish to change by
pressing the ▲ or ▼ button.
Press the ENTER button.
➣ The selected channel number and name are moved to right
side.
4.Select the number of the programme to which the channel is to
be moved by pressing the ▲ or ▼ button.
5.Press the ENTER button. The channel is moved to its new
position and all other channels are shifted accordingly.
6. Repeat steps 3 to 5 for another channel to be sorted.
7. Press the EXIT button to exit.
TV
Channel
Area
:Asia/W.Europe
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move TV
Enter







Return
Sort
Prog.
0
1
2
3
4
Ch. Name

C-
C23
C16
C3
S1

Move Enter
Return
Assigning Channels Names
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed,
allowing you to assign new names.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Name", then press the
ENTER button.
3. If necessary, select the channel to be assigned to a new
name by pressing the ▲ or ▼ button. Press the ENTER
button
➣ The selection bar is displayed around the name box.
4. To...
Then...
Select a letter, number or symbol Press the ▲ or ▼ button
Move on the next letter
Press the ► button
Move back the previous letter
Press the ◄ button
Confirm the name
Press the ENTER
TV
Channel
Area
:Asia/W.Europe
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move Enter







Return
Name
TV
Prog.
0
1
2
3
4
Ch.

C--
C23
C16
C3
S1

Move Name
---------
------------Enter
Return
button
➣
The following characters are available: Letters of the alphabet (A~Z) / Numbers (0~9) / Special
characters (+, -, *, /, space)
5. Repeat steps 3 to 4 for each channel to be assigned to a new name.
6. Press the EXIT button to exit.
English - 13
BN68-01717L.indb 13
2008-08-18 �� 6:13:23
Fine Tuning Channel Reception
Use fine tuning to manually adjust a particular channel for
optimal reception.
1. Use the number buttons to directly select the channel that you want to fine tune.
2. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
3. Press the ▲ or ▼ button to select "Fine Tune", then press the ENTER button.
4. Press the ◄ or ► button to adjust the fine tuning.
Press the ENTER button.
5. Press the EXIT button to exit.
➣ Fine tuned channels that have been saved are marked with an asterisk "*" on the right-hand side of the channel number in the channel banner. And the channel number turns red.
➣ To reset the fine-tuning, select "Reset" by pressing the ▲ or ▼
button and then press the ENTER button.
TV
Channel
Area
:Asia/W.Europe
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move Enter







Return
Fine Tune
P1
0
Reset
Adjust Save
Return
English - 14
BN68-01717L.indb 14
2008-08-18 �� 6:13:23
Changing the Picture Standard
You can select the type of picture which best corresponds to
your viewing requirements.
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
2. Press the ENTER button again, to select "Mode".
3. Press the ▲ or ▼ button to select the desired picture effect.
Press the ENTER button.
4. Press the EXIT button to exit.
♦ Dynamic: Selects the picture for high-definition in a bright
room.
♦ Standard: Selects the picture for optimum display in a
normal environment.
♦ Movie: Selects the picture for comfortable display in a dark
room.
➣
The Picture mode must be adjusted separately for each input
source.
TV
Picture
Mode
:Standard 
Backlight7
Contrast 95
Brightness 40
Sharpness 50
Colour 50
Tint
G50
R50
Detailed Settings 
sMore
TV
Move Enter
Return
Picture
Dynamic Mode
:Standard
Standard 7
Backlight
Movie
Contrast
95
Brightness 40
Sharpness 50
Colour 50
Tint
G50
R50
Detailed Settings sMore
Move Enter
Return
You can also press the P.MODE button on the remote control to
select one of the picture settings.
Easy Setting
1. Press the TOOLS button on the remote control.
2.Press the ▲ or ▼ button to select “Picture Mode”.
3.Press the ◄ or ► button to select the desired picture mode.
4. Press the EXIT or TOOLS button to exit.
Tools
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode Sleep Timer SRS TS XT
Energy Saving Dual l-ll Move ◄ Standard
: Custom
:
Off
:
Off
:
Off
:
Mono
Adjust
►
Exit
English - 15
BN68-01717L.indb 15
2008-08-18 �� 6:13:24
Adjusting the Custom Picture
Your set has several settings which allow you to control picture
quality.
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
2.Press the ▲ or ▼ button to select a particular item. Press the
ENTER button.
3.Press the ◄ or ► button to decrease or increase the value of a
particular item. Press theENTER button.
4. Press the EXIT button to exit.
♦ Backlight: Adjusts the screen brightness by adjusting the LCD
backlight brightness. (0~10)
♦ Contrast: Adjusts the lightness and darkness between objects
and the background.
♦ Brightness: Adjusts the brightness of the whole screen.
♦ Sharpness: Adjusts the outline of objects to either sharpen them
or make them more dull.
♦ Colour: Adjusts the colours, making them lighter or darker.
♦ Tint: Adjusts the colour of objects, making them more red or
green for a more natural look.
➣
➣
➣
➣
➣
TV
Picture
Mode
:Standard 
Backlight7
Contrast 95
Brightness 40
Sharpness 50
Colour 50
Tint
G50
R50
Detailed Settings 
sMore
Move Enter
Return
▲
Backlight
7
▼
Move
Adjust Return
The adjusted values are stored according to the selected Picture mode.
In PC mode, you can only make changes to "Backlight”, “Contrast" and “Brightness”.
TV, AV1, AV2, S-Video modes of the PAL system, you cannot use the "Tint" Function.
You can return to the factory defaults picture settings by selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory Defaults" on page 19)
The energy consumed during use can be significantly reduced if the level of brightness of the picture
is reduced, and then this will reduce the overall running cost.
Configuring Detailed Settings on the Picture
You can set detailed picture settings.
TV
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
2. Press the ENTER button to select “Mode”.
Press the ▲ or ▼ button to select “Standard” or “Movie”, then
press the ENTER button.
3. Press the ▲ or ▼ button to select "Detailed Settings", then press
the ENTER button.
4. Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
5. When you are satisfied with your setting, press the ENTER
button.
6. Press the EXIT button to exit.
➣ "Detailed Settings" is available in "Standard" or "Movie" mode.
➣ In PC mode, you can only make changes to “Dynamic Contrast”,
“Gamma” and “White Balance” from among the “Detailed
Settings” items.
Picture
Mode
:Standard 
Backlight7
Contrast 95
Brightness 40
Sharpness 50
Colour 50
Tint
G50
R50
Detailed Settings 
sMore
TV
Move Enter
Detailed Settings
Black Adjust
:Off
Dynamic Contrast:Medium
Gamma
:0
Colour Space
: Native
White Balance
Flesh Tone
: 0
Edge Enhancement:Off
xvYCC
:Off
Move Enter
Return








Return
♦ Black Adjust: Off/Low/Medium/High
You can directly select the black level on the screen to adjust the screen depth.
♦ Dynamic Contrast: Off/Low/Medium/High
You can adjust the screen contrast so that the optimal contrast is provided.
English - 16
BN68-01717L.indb 16
2008-08-18 �� 6:13:25
♦ Gamma: -3 ~ +3
You can adjust the Primary Colour (Red, Green, Blue) Intensity.
Press the ◄ or ► button until you reach the optimal setting.
♦ Colour Space: Auto/Native/Custom
Colour space is a Colour matrix composed of “Red”, “Green” and “Blue” Colours.
Select your favourite Colour space to experience the most natural Colour.
♦ Auto: Auto Colour Space automatically adjusts to the most natural colour tone based on
programme sources.
♦ Native: Native Colour Space offers deep and rich colour tone.
♦ Custom: Adjusts the colour range to suit your preference.
➣
Customizing the Colour Space
Colour: Red/Green/Blue/Yellow/Cyan/Magenta
Adjusts the Colour range to suit your preference.
“Colour” is available when “Colour Space” is set to “Custom”.
Press the ▲ or ▼ button to select “Red”, “Green”, “Blue”, “Yellow”, “Cyan” or “Magenta”.
Press the ENTER button.
Red/Green/Blue: In “Colour”, you can adjust the RGB values for the selected colour.
Press the ▲ or ▼ button to select "Red", "Green" or "Blue" to change it.
Press the ENTER button.
Press the ◄ or ► button to decrease or increase the value of a particular item. Press the
ENTER button.
Reset: Resets the colour space to the default values.
♦ White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset
You can adjust the colour temperature for more natural picture colours.
R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the
adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults.
♦ Flesh Tone: -15 ~ +15
You can emphasize the pink 'flesh tone' in the picture.
Press the ◄ or ► button until you reach the optimal setting.
➣ Changing the adjustment value will refresh the adjusted screen.
♦ Edge Enhancement: Off/On
You can emphasize object boundaries in the picture.
♦ xvYCC: Off/On
Setting the xvYCC mode to On increases detail and colour space when watching movies from an
external device (ie. DVD player) connected to the HDMI or Component IN jacks. You must set the
Picture Mode to Movie to enjoy this feature.
➣ Only available in "HDMI" and "Component" on "Movie" mode.
➣ If xvYCC function is active, PIP cannot be selected.
English - 17
BN68-01717L.indb 17
2008-08-18 �� 6:13:25
Configuring Picture Option
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
2. Press the ▲ or ▼ button to select "Picture Options", then press
the ENTER button.
3. Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
4. When you are satisfied with your setting, press the ENTER
button.
5. Press the EXIT button to exit.
➣
In PC mode, you can only make changes to the “Colour
Tone” and “Size” from among the items in “Picture Options”.
♦ Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2
You can select the most comfortable colour tone to your eyes.
➣
TV
Picture
More
Picture Options 
Reset
: OK 
TV
Move Enter
Picture Options
Colour Tone
:Normal
Size
:16:9
Digital NR
:Auto
DNIe
:Off
HDMI Black Level :Normal
120Hz Motion Plus:Off
Blue Only Mode :Off
Move Enter
Return







Return
The adjusted values are stored according to the selected
"Picture" mode.
➣ When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be selected.
♦ Size: 16:9/Wide Zoom/Zoom/4:3/Just Scan
You can select the picture size which best corresponds to your viewing requirements.
♦ 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
♦ Wide Zoom: Magnify the size of the picture more than 4:3.
♦ Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
♦ 4:3: This is the default setting for a video movie or normal broadcasting.
♦ Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i/
1080p) or Component (1080i/1080p) signals are input.
➣
➣
➣
➣
➣
➣
➣
➣
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
Settings can be adjusted and stored for each external device you have connected to an input of
the TV.
Temporary image retention may occur when viewing a static image on the set for more than two
hours.
"Wide Zoom": Move the screen up/down using the ▲ or ▼ button after selecting the
by
pressing the ► or ENTER button.
"Zoom": Select
by pressing the ◄ or ►button. Use the ▲ or ▼ button to move the picture up
and down. After selecting , use the ▲ or ▼ button to magnify or reduce the picture size in the
vertical direction.
When Double (
,
) mode has been set in PIP, the Picture Size cannot be set.
After selecting “Just Scan” in HDMI (1080i/1080p) or Component (1080i/1080p) mode:
Select
by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER button.
You can initialize the setting.
If you use the “Just Scan” function with HDMI 720p input, 1 line will be cut at the top, bottom, left
and right as in the overscan function.
You can select these options by simply pressing the P.SIZE
button on the remote control.
English - 18
BN68-01717L.indb 18
2008-08-18 �� 6:13:26
♦ Digital NR: Off/Low/Medium/High/Auto
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction
feature to help reduce any static and ghosting that may appear on the screen.
➣ When the signal is weak, select one of the other options until the best picture is displayed.
♦ DNIe: Off/ Demo/On
This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you can
view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied
DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view
the difference in the visual quality.
➣ DNIe™ (Digital Natural Image engine)
This feature brings you more detailed image with 3D noise reduction, detail enhancement,
contrast enhancement and white enhancement. New image compensation Algorithm gives
brighter, clearer, more detailed image to you. DNIe™ technology will fit every signal into your
eyes.
➣ This function is not available in "Movie" and "Standard" mode.
♦ HDMI Black Level: Normal/Low
You can directly select the black level on the screen to adjust the screen depth.
➣ This function is active only when the external input connects to HDMI(RGB signals).
♦ 120Hz Motion Plus: Off/Low/Medium/High/Demo
Removes drag from fast scenes with a lot of movement to provide a clearer picture.
➣ This function is not available in PC mode.
➣ If you enable "120Hz Motion Plus", noise may appear on the screen.
If this occurs, set "120Hz Motion Plus" to "Off" or select one of the other options.
♦ Blue Only Mode: Off/On
This function is for AV device measurement experts. This function displays the blue signal only by
removing the red and green signals from the video signal so as to provide a Blue Filter effect that is
used to adjust the Colour and Tint of video equipment such as DVD players, Home Theaters, etc.
Using this function, you can adjust the Colour and Tint to preferred values appropriate to the signal
level of each video device using the Red/Green/Blue/ Cyan/Magenta/Yellow Colour Bar Patterns,
without using an additional Blue Filter.
➣ “Blue Only Mode” is available when the picture mode is set to “Movie” or “Standard”.
Resetting the Picture Settings to the Factory Defaults
You can return to the factory defaults picture settings.
1. To select the desired picture effect, follow the "Changing the
Picture Standard" instructions number 1 to 3 (On page 15).
2. Press the ▲ or ▼ button to select "Reset", then press the
ENTER button.
3. Press the ▲ or ▼ button to select "OK" or "Cancel".
Press the ENTER button.
4. Press the EXIT button to exit.
➣ The "Reset" will be set for each "Picture" mode.
TV
Picture
More
Picture Options
OK
Reset
: OK Cancel
Move Enter
Return
English - 19
BN68-01717L.indb 19
2008-08-18 �� 6:13:26
Viewing the Picture In Picture (PIP)
You can display a sub picture within the main picture of set
programme or video input. In this way, you can watch the
picture of set programme or video input from any connected
equipment while watching the main picture.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER button.
2. Press the▲ or ▼ button to select "PIP", then press the
ENTER button.
3. Press the ENTER button to select “PIP”.
Press the▲ or ▼ button to select "On", then press the
ENTER button.
4.Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
5.When you are satisfied with your setting, press the ENTER
button.
6. Press the EXIT button to exit.
➣
TV
Setup
Plug & Play 
Language
:English 
Time 
Cable Network Setup 
Auto Wall-Mount 
Melody
:Off 
Entertainment : Off 
Energy Saving : Off 
PIP 
TV
Move Enter
Return
Mode
:Custom
PIP
Equalizer
PIP
::Off
On SRS TS XT
Source
:TV
Auto Volume
:Off
Size
:
Internal Mute
:Off
Position
:
Reset
Programme
:P 1
Move
Enter
Move 









Return
Enter
Return
You may notice that the picture in the PIP window becomes
slightly unnatural when you use the main screen to view a game
or karaoke.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “PIP”, then press the
ENTER button.
3. Press the ◄ or ► button to select the “On”.
4. Press the ▲ or ▼ button to select a particular item.
5. Press the ◄ or ► button to select the required option.
6. Press the EXIT or TOOLS button to exit.
♦ PIP: On/Off
You can activate or deactivate the PIP function.
Main picture
Sub picture
Component 1, 2
TV, AV1, AV2
HDMI 1, 2, 3, 4
TV, AV1, AV2
PC
TV, AV1, AV2
Tools
Anynet+ (HDMI-CEC)
Picture Mode Sound Mode Sleep Timer SRS TS XT
Energy Saving PIP
Move :
:
:
:
:
Standard
Custom
Off
Off
Off
Enter
Exit
PIP
PIP
Source
Programme
Size
Position
:
◄
On
:TV
:
P1
:
:
Move Adjust
►
Return
♦ Source
You can select a source of the sub-picture.
♦ Size:
/
/
You can select a size of the sub-picture.
➣ If main picture is in "HDMI" mode, "Size" is available.
♦ Position:
/
/
/
You can select a position of the sub-picture.
➣ In Double ( , ) mode, "Position" cannot be selected.
♦ Programme
You can select a channel of the sub-picture only when the "Source" is set to "TV".
English - 20
BN68-01717L.indb 20
2008-08-18 �� 6:13:27
Sound Features
1. Press the MENU button to display the menu. Press the ▲ or ▼
button to select "Sound", then press the ENTER button.
2. Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
3. When you are satisfied with your setting, press the ENTER
button.
4. Press the EXIT button to exit.
TV
TV
Sound
Mode
:Custom
Equalizer
SRS TS XT
:Off
Auto Volume
:Off
TV Speaker
:On
Sound Select
:Main
♦ Mode: Standard/Music/Movie/Speech/Custom
You can select the type of special sound effect to be used when
watching a given broadcast.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select "Sound Mode".
3. Press the ◄ or ► button to select the desired sound mode.
4. Press the EXIT or TOOLS button to exit.
♦ Equalizer: Balance/100Hz/300Hz/1kHz/3kHz/10kHz
The sound settings can be adjusted to suit your personal
preferences.
➣ If you make any changes to these settings, the sound mode
is automatically switched to "Custom".
Move Enter






Return
Tools
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode Sleep Timer SRS TS XT
Energy Saving Dual l-ll Move : Standard
◄ Custom ►
:
Off
:
Off
:
Off
:
Mono
Adjust
Exit
Equalizer
TV
Balance 100Hz 300Hz 1kHz 3kHz 10kHz
Move Adjust
Return
♦ SRS TS XT: Off/On
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel
content over two speakers. TruSurround delivers a compelling, virtual surround sound experience
through any two-speaker playback system, including internal television speakers. It is fully compatible
with all multichannel formats.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “SRS TS XT”.
3. Press the ◄ or ► button to select the "Off" or "On".
4. Press the EXIT or TOOLS button to exit.
Tools
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode Sleep Timer SRS TS XT
Energy Saving Dual l-ll Move : Standard
: Custom
:
Off
Off
◄
:
Off
:
Mono
►
Adjust
Exit
TruSurround XT, SRS and
Symbol are trademarks of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs,
Inc.
♦ Auto Volume: Off/On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume
every time the channel is changed. This feature lets you automatically adjust the volume of the
desired channel by lowering the sound output when the modulation signal is high or by raising the
sound output when the modulation signal is low.
English - 21
BN68-01717L.indb 21
2008-08-18 �� 6:13:28
♦ TV Speaker: Off/On
If you want to hear the sound through separate speakers, cancel the internal amplifier.
➣ The - VOL + and MUTE buttons do not operate when the "TV Speaker" is set to Off.
➣ When “TV Speaker” is set to “Off”, you can operate only “Sound Select” (in PIP mode) in Sound
menu.
♦ Sound Select: Main/Sub
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
− Main: Used to listen to the sound of the main picture.
− Sub: Used to listen to the sound of the sub picture.
Selecting the Sound Mode
You can set the sound mode in the "Tools" menu.
When you set to "Dual I-II", the current sound mode is displayed
on the screen.
1.
2.
3.
4.
Press the TOOLS button on the remote control.
Press the ▲ or ▼ button to select “Dual I-II".
Press the ◄ or ► button to select required option.
Press the ENTER button.
A2
Stereo
NICAM
Stereo
➣
➣
➣
Audio Type
Mono
Stereo
Dual
Mono
Stereo
Dual
Dual 1/2
MONO
STEREO ↔ MONO
DUAL 1 ↔ DUAL 2
MONO
MONO ↔ STEREO
MONO ↔ DUAL 1
DUAL 2
Tools
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode Sleep Timer SRS TS XT
Energy Saving Dual l-ll Move : Standard
: Custom
:
Off
:
Off
:
Off
◄ Mono ►
Adjust
Exit
Default
Automatic
change
DUAL 1
Automatic
change
DUAL 1
If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.
This function is only activated in stereo sound signal. It is deactivated in mono sound signal.
This function is only available in TV mode.
Connecting Headphones (Sold separately)
You can connect a set of headphones to your set if you wish to
watch a TV programme without disturbing the other people in the
room.
➣
➣
➣
➣
TV Side Panel
When you insert the head set jack into the corresponding port, you
can operate only "Auto Volume" and "Sound Select"(in PIP mode) in
Sound menu.
Prolonged use of headphones at a high volume may damage your
hearing.
You will not receive sound from the speakers when you connect headphones to the system.
The headphone volume and TV volume are adjusted differently.
English - 22
BN68-01717L.indb 22
2008-08-18 �� 6:13:28
Setting and Displaying the Current Time
You can set the TV’s clock so that the current time is
displayed when you press the INFO button. You must also set
the time if you wish to use the automatic On/Off timers.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Time", then press the
ENTER button.
3. Press the ENTER button to select "Clock Set".
4.
To...
Press the....
Move to "Month", "Day", "Year",
"Hour", "Minute" or "am/pm"
TV
Mode
:Custom 
Setup
Equalizer 
Plug
&
Play

SRS TS XT
:Off 
Language
:English 
Auto
Volume
:Off 

Time

Internal
Mute Setup
:Off 
Cable
Network
Reset
Auto
Wall-Mount 
Melody
: Off 
Entertainment : Off 
Energy Saving : Off 

PIP Move
Enter
Return
Return
Clock Set
Month
p
01
q
Hour
12
◄ or ► button.
ENTER
Enter
TV
Set the "Month", "Day", "Year", "Hour", ▲ or ▼ button.
"Minute" or "am/pm"
Confirm the setting
Move button
Move Day
Year
01
2008
Minute
00
am/pm
am
Adjust
Return
5. Press the EXIT button to exit.
➣ The current time will appear every time you press the INFO button.
➣ You can also set "Month", "Day", "Year", "Hour" and "Minute" by pressing the number buttons on the
remote control.
➣ If you disconnect the power cord, you have to set the clock again.
Setting the Sleep Timer
You can select a time period of between 30 and 180 minutes
after which the television automatically switches to standby
mode.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Time", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Sleep Timer", then press the ENTER button.
4. Press the ▲ or ▼ button repeatedly until the desired time appears (Off, 30, 60, 90, 120, 150, 180).
Press the ENTER button.
5. Press the EXIT button to exit.
➣ The TV automatically switches to standby mode when the timer reaches 0.
Easy Setting
1. Press the TOOLS button on the remote control.
2.Press the ▲ or ▼ button to select “Sleep Timer”.
3.Press the ◄ or ► button to select the minute.
4. Press the EXIT or TOOLS button to exit.
TV
Mode
:Custom 
Setup
Equalizer 
Plug
& Play

SRS TS
XT
:Off 
Language
:English 

Auto Volume
:Off 
Time
Internal
Mute
:Off
Cable Network Setup 

Reset
Auto
Wall-Mount 
Melody
: Off 
Entertainment : Off 
Energy Saving : Off 

PIP Move
Enter
Return
Move Enter
TV
Return
Time
Clock Set
Sleep Timer
Timer 1
Timer 2
Timer 3
: 12:00 am
:
Off
:
30
60
:
90
:
120
150
180
Move Enter
Return
Tools
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode Sleep Timer SRS TS XT
Energy Saving Dual l-ll Move : Standard
: Custom
◄
Off
:
Off
:
Off
:
Mono
Adjust
►
Exit
English - 23
BN68-01717L.indb 23
2008-08-18 �� 6:13:30
Switching the Television On and Off Automatically
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Time", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Timer 1", "Timer 2",
"Timer 3", then press the ENTER button.
Three different On/Off Timer Settings can be made.
➣ You must set the clock first.
4.Press the ◄ or ► button to select the required item below.
Press the ▲ or ▼ button to adjust to the setting satisfied.
TV
Setup
Plug & Play 
Language
:English 
Time 
Cable Network Setup 
Auto Wall-Mount 
Melody
: Off 
Entertainment : Off 
Energy Saving : Off 
PIP 
TV
♦ On Time : Select hour, minute, am/pm and "Activate"/
"Inactivate". (To activate timer with the setting satisfied, set to
"Activate".)
Move On Time
5
12 : 00
6
Off Time
12 : 00
Volume
10
Repeat
♦ Off Time : Select hour, minute, am/pm and "Activate"/
"Inactivate". (To activate timer with the setting satisfied, set to
"Activate".)
Enter
Return
Timer 1
am
am
Inactivate
Inactivate
Programme
1
Once
► Move Adjust
Return
♦ Volume : Select the desired turn on volume level.
♦ Programme : When the On Timer is active, you can turn on a specific channel.
➣
➣
♦ Repeat : Select "Once", "Everyday", "Mon~Fri", "Mon~Sat" or "Sat~Sun".
You can set the hour and minute directly by pressing the number buttons on the remote control.
Auto Power Off
When you set the timer On, the TV will eventually turn off, if no controls are operated for 3 hours
after the TV was turned on by timer. This function is only available in timer On mode and prevents
overheating, which may occur if a TV is on for too long time.
Choosing Your Language
When you start using your set for the first time, you must
select the language which will be used for displaying menus
and indications.
1. Press the MENU button to display the on-screen menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Language", then press the ENTER button.
3. Select a particular language by pressing the ▲ or ▼ button repeatedly.
Press the ENTER button.
4. Press the EXIT button to exit.
TV
Setup
Plug & Play 
Language
:English 
Time 
Cable Network Setup 
Auto Wall-Mount 
Melody
: Off 
Entertainment : Off 
Energy Saving : Off 
PIP 
Move Enter
Return
English - 24
BN68-01717L.indb 24
2008-08-18 �� 6:13:30
Melody / Entertainment / Energy Saving
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2.Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
3.When you are satisfied with your setting, press the ENTER
button.
4.Press the EXIT button to exit.
TV
Mode
:Custom 
Setup
Equalizer 
Plug
&
Play

SRS TS XT
:Off 
Language
:English 
Auto
Volume
:Off 

Time

Internal
Mute Setup
:Off 
Cable
Network
Reset
Auto
Wall-Mount 
Melody
:Off 
Entertainment : Off 
Energy Saving : Off 

PIP Move
Enter
Return
Move Enter
Return
♦ Melody: Off/Low/Medium/High
The TV power on/off melody sound can be adjusted.
➣ The Melody does not play
− When no sound is output from the TV because the MUTE button has been pressed.
− When no sound is output from the TV because the - (Volume) button has been pressed.
− When the TV is turned off by the Sleep Timer function.
♦ E
ntertainment: Off/Sports/Cinema/Game
The “Entertainment” mode enables you to select the optimal display and sound for sports, cinema
and games.
− Off: Switch the "Entertainment" function off.
− Sports: Provides the optimal picture and sound quality for sports. You can enjoy more thrilling
colour and sound.
− Cinema: Provides the optimal picture and sound quality for cinema. You can experience a richer
picture and enhanced sound.
− Game: Provides the optimal picture and sound quality for games. This mode accelerates the
playing speed when using an external game console connected to the TV.
➣
➣
➣
➣
If you set any of the three “Entertainment” modes to On, the settings will be locked and can not be
adjusted. If you want to make Picture and Sound mode adjustments, the “Entertainment” mode
must be turned off.
If you set any of the three “Entertainment” modes to On, “SRS TS XT” and “Equalizer” function is
not available.
The “Entertainment” settings are saved for each input source.
This function is not available in PC mode.
You can press the E.MODE button on the remote control
repeatedly to change the “Entertainment” setting.
English - 25
BN68-01717L.indb 25
2008-08-18 �� 6:13:31
♦ Energy Saving: Off/Low/Medium/High/Auto
This feature adjusts the screen brightness depending on the surrounding lighting conditions.
− Off: Turns off the energy saving function.
− Low: Sets the TV to low energy saving mode.
− Medium: Sets the TV to medium energy saving mode.
− High: Sets the TV to high energy saving mode.
− Auto: Automatically adjusts the brightness of the TV screen in accordance with the scenes.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “Energy Saving”.
3. Press the ◄ or ► button to select the "Off", "Low",
"Medium", "High" or "Auto".
4. Press the EXIT or TOOLS button to exit.
Tools
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode Sleep Timer SRS TS XT
Energy Saving Dual l-ll Move : Standard
: Custom
:
Off
:
Off
◄
Off
:
Mono
Adjust
►
Exit
English - 26
BN68-01717L.indb 26
2008-08-18 �� 6:13:31
Network Connection
LAN Connection for a DHCP Environment
The procedures to set up the network using Dynamic Host Configuration Protocol (DHCP) are described
below. Since an IP address, subnet mask, gateway, and DNS are automatically allocated when DHCP is
selected, you do not have to enter them manually.
TV Rear Panel
The Modem Port
on the Wall
External Modem
(ADSL/VDSL/Cable TV)
1
2
LAN
Cable
Modem Cable
1. Connect the [LAN] port on the rear panel of the TV and the external modem with a LAN Cable.
2. Connect the LAN port on the wall and the external modem with a Modem Cable.
You can connect the LAN via a Sharer (Router).
IP Sharer
The Modem
Port on the Wall
External Modem
(ADSL/VDSL/
Cable TV)
LAN Cable
TV Rear Panel
LAN Cable
Modem Cable
➣
➣
➣
➣
The terminals (the position of the port and the type) of the external device may differ depending on the
manufacturer.
If the IP address allocation by the DHCP server has failed, turn the external modem off, turn it on
again after at least 10 seconds and then try again.
For the connections between the external modem and the Sharer (Router), refer to the owner’s
manual of the corresponding product.
You cannot use a manual-connection-type ADSL modem because it does not support DHCP. You have
to use an automatic-connection-type ADSL modem.
English - 27
BN68-01717L.indb 27
2008-08-18 �� 6:13:32
LAN Connection for Static IP Environment
The procedures to set up the network using a static IP address are described below. You have to manually enter the IP address, subnet mask, gateway, and DNS that are provided by your Internet Service
Provider (ISP).
You can connect the LAN via a Sharer (Router).
The LAN Port
on the Wall
LAN Cable
IP Sharer
TV Rear Panel
LAN
Cable
1. Connect the [LAN] port on the rear panel of the TV and the IP Sharer with a LAN Cable.
2. Connect the LAN port on the wall and the IP Sharer with a LAN Cable.
➣
➣
➣
➣
➣
The terminals (the position of the port and the type) of the external device may differ depending on
the manufacturer.
If you are using a static IP address, your ISP will inform you of the IP address, subnet mask, gateway,
and DNS. You must enter these values to complete the network settings. If you do not know the
values, ask your network administrator.
For the information on how to configure and connect a Sharer (Router), refer to the owner’s manual
for the corresponding product.
If you use an IP Sharer (IP Router) that supports DHCP, you can set up the device as either DHCP or
static IP.
For the procedures to use a static IP address, ask your Internet Service Provider.
English - 28
BN68-01717L.indb 28
2008-08-18 �� 6:13:32
Cable Network Setup
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the
ENTERE button.
TV
2. Press the ▲ or ▼ button to select “Cable Network Setup”,
then press the ENTERE button.
➣
Please check if the LAN cable is connected.
Setup
Plug & Play 
Language
:English 
Time 
Cable Network Setup 
Auto Wall-Mount 
Melody
: Off 
Entertainment : Off 
Energy Saving : Off 
PIP 
Move Enter
Return
Auto Setup
If you connect the LAN cable and it supports DHCP, the Internet
Protocol (IP) Settings are automatically configured. (refer to page
27)
3. Press the ENTERE button to select “Internet Protocol
Setup”.
4. Press the ▲ or ▼ button to select “Auto Setup”, then press
the ENTERE button.
➣
➣
The Internet Protocol is set automatically.
Select “Network Test” to check the network connectivity.
Cable Network Setup
Internet Protocol Setup: Auto Setup 

Network Test
IP Address
:
Subnet Mask
Gateway
DNS Server
:
:
:
Move 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Enter
Return
Manual Setup
To connect the TV to the LAN using a static IP address, you must
set up the Internet Protocol (IP). Please check if the LAN cable is
connected. (refer to page 28)
3. Press the ENTERE button to select “Internet Protocol
Setup”.
4. Press the ▲ or ▼ button to select “Manual Setup”, then
press the ENTERE button.
5. Press the ▲, ▼, ◄ or ►button to move to an item, and
press the numeric button to configure the selected item.
Press the ENTERE button.
➣
Cable Network Setup
Internet Protocol Setup: Manual Setup
Network Test

IP Address
Subnet Mask
:
:
Gateway
DNS Server
:
:
Move 0~9
0
0
0
0
Number
0
0
0
0
0
0
0
0
Enter
0
0
0
0
Return
Select “Network Test” to check the network connectivity.
Network Test
You can test or confirm the network connection status after setting
up the network.
3. Press the ▲ or ▼ button to select “Network Test”, then press
the ENTERE button.
➣ The current network settings will appear.
4. Press the EXIT button to exit.
Cable Network Setup
Internet Protocol Setup: Auto Setup 

Network Test
IP Address
:
Subnet Mask
Gateway
DNS Server
:
:
:
Move 0
0
0
0
Enter
0
0
0
0
0
0
0
0
0
0
0
0
Return
English - 29
BN68-01717L.indb 29
2008-08-18 �� 6:13:33
When unable to connect to a wired network
• If your Internet service provider has registered the MAC address of the device used to connect to the
Internet for the first time and authenticates the MAC address each time you connect to the Internet,
your TV may not be able to connect to the Internet as the MAC address differs from that of the device
(PC) used to connect to the Internet the first time. In this case, ask your Internet service provider about
the procedures to connect devices other than your PC (such as your TV) to the Internet.
• If your Internet service provider requires an ID or password to connect to the Internet (network), your
TV may not be able to connect to the Internet. In this case, you have to enter your ID or password
when connecting to the Internet using an Internet Sharer (Router).
• The internet connection may fail due to a firewall problem. In this case, contact your Internet service
provider.
• If you cannot connect to the Internet even if you have followed the procedures of your Internet service
provider, please contact a Samsung Electronics Service Center.
Selecting the Source
You can select among external sources connected to your TV’s
input jacks.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Input", then press the ENTER button.
2. Press the ENTER button again, to select "Source List".
➣ When no external device is connected to your set, only "TV"
is activated in the "Source List". "AV1", "AV2",
"S-Video", "Component1", "Component2", "PC", "HDMI1",
"HDMI2", "HDMI3", "HDMI4" are activated only when they
are connected to your set.
3. Select the required device by pressing the ▲ or ▼ button.
Press the ENTER button.
TV
Mode
:Custom
Input
Equalizer
Source
List
:TV
SRS TS XT
:Off
Edit Name
Auto
Volume
:Off
Anynet+(HDMI-CEC)
Internal Mute
:Off
WIESLINK
Pro (USB/DLNA)
Reset Library
Content
Product Guide
Move
TV
Move Enter
Enter







Return
Return
Mode
:Custom

Source
List
Equalizer 
TV
SRS TS XT
:Off 
AV1
:---Auto Volume
:Off 
AV2
:---Internal Mute
:Off 
S-Video
:---Reset
Component1
:---Component2
:---PC
:---sMore
Move
Enter
Return
Move Enter
Return
Press the SOURCE button on the remote control to toggle
between all the available source.
TV mode can be selected by pressing the TV button,
number buttons(0~9), and the P / button on the remote
control. You can also watch HDMI mode simply by pressing
the HDMI button on the remote control.
English - 30
BN68-01717L.indb 30
2008-08-18 �� 6:13:34
Editing the Input Source Names
Name the device connected to the input jacks to make your
input source selection easier.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Input", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Edit Name", then press the
ENTER button.
3. Press the ▲ or ▼ button to select the device that you wish to edit.
Press the ENTER button.
4. Press the ▲ or ▼ button to select the required device.
Press the ENTER button.
5. Press the EXIT button to exit.
➣ When a PC with a resolution of 1920 x 1080@60Hz is
connected to the HDMI IN 2 port, you should set the
"HDMI2" mode to "PC" in the "Edit Name" of the "Input"
mode.
TV
Mode
:Custom
Input
Equalizer
Source
List
:TV
SRS TS XT
:Off
Edit Name
Auto
Volume
:Off
Anynet+(HDMI-CEC)
Internal Mute
:Off
WIESLINK
Pro (USB/DLNA)
Reset Library
Content
Product Guide
Move
TV
Move Enter
Enter







Return
Return
Mode

Edit:Custom
Name
Equalizer 
AV1
:------
SRS TS XT
:Off
AV2
:---VCR

Auto Volume
:Off
DVD
S-Video
:---
Internal Mute
:Off
Component1
:----Cable STB
Reset
Satellite
STB
Component2
:---PC
:---- PVR STB
AV Receiver
HDMI1
:---- s
sMore
Move
Enter
Return
Move Enter
Return
English - 31
BN68-01717L.indb 31
2008-08-18 �� 6:13:35
Product Guide
The Product Guide gives you information on the most important features of this TV.
1. Press the MENU button to display the menu. Press the ▲ or ▼
button to select “Input”, then press the ENTERE button.
2. Press the ▲ or ▼ button to select “Product Guide”, then press
the ENTERE button.
TV
Input
Source List
:TV 
Edit Name 
Anynet+(HDMI-CEC)
WIESLINK Pro (USB/DLNA)
Content Library
Product Guide
Move Enter
Return
3. Press the ◄ or ► button to select a Guide (“Picture Quality”,
“Entertainment” or “Connectivity”) and press the ENTERE
button.
4. You can navigate the Product Guide screen by using the ◄ and ► buttons.
Picture Quality
Full HD 1080p
120Hz Motion Plus
Entertainment
Content Library
Entertainment Mode
Connectivity
WISELINK Pro
DLNA
4HDMI
Anynet+
5. Press the EXIT button to exit.
Using the Remote Control Button in Product Guide Menu
Button
Operations
Yellow Button
Shows the contents of the Product Guide sequentially. (AutoPlay)
Wheel (◄/►)
Move the cursor and select an item.
ENTERE
RETURN
EXIT
Select the currently selected item.
Return to the previous menu.
Stop the current function and return to the “Product Guide” main menu.
English - 32
BN68-01717L.indb 32
2008-08-18 �� 6:13:35
Setting up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The
actual screens on your PC may be different depending upon your particular
version of Windows and your particular video card. Even if your actual screens
look different, the same, basic set-up information will apply in almost all cases.
(If not, contact your computer manufacturer or Samsung Dealer.)
1. First, click on "Control Panel" on the Windows start menu.
2. When the control panel window appears, click on "Appearance and Themes" and a display dialog-box will appear.
3.When the control panel window appears, click on "Display" and a display
dialog-box will appear.
4. Navigate to the "Settings" tab on the display dialog-box.
The correct size setting (resolution): Optimum- 1920 X 1080
If a vertical-frequency option exists on your display settings dialog box, the correct value is
"60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.
Display Modes
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The resolutions in the table are recommended.
➣
➣
➣
➣
➣
➣
➣
D-Sub Input
Mode
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Pixel Clock
Frequency (MHz)
Sync Polarity
(H/V)
IBM
640 x 350
720 x 400
31.469
31.469
70.086
70.087
25.175
28.322
+/-/+
VESA
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1280 x 1024
1280 x 1024
1360 x 768
1600 x 1200
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
63.981
79.976
47.712
75.000
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
60.020
75.025
60.015
60.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
135.000
85.500
162.000
-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
+/+
+/+
CVT
1920 x 1080RB
66.587
59.934
138.500
+/-
HDMI/DVI Input
Mode
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Pixel Clock
Frequency (MHz)
Sync Polarity
(H/V)
VESA
640 x 480
800 x 600
1024 x 768
1280 x 1024
1360 x 768
1600 x 1200
31.469
37.879
48.363
63.981
47.712
75.000
59.940
60.317
60.004
60.020
60.015
60.000
25.175
40.000
65.000
108.000
85.500
162.000
-/+/+
-/+/+
+/+
+/+
CEA
1920 x 1080p
67.500
60.000
148.500
+/+
When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
Separate and Composite modes are supported. SOG is not supported.
Too long or low quality VGA cable can cause picture noise at high resolution modes
(1920x1080 or 1600x1200).
English - 33
BN68-01717L.indb 33
2008-08-18 �� 6:13:35
Setting up the TV with your PC
➣ Press the SOURCE button to select PC mode.
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
2. Select the required option by pressing the ▲ or ▼ button,
then press the ENTER button.
3. When you are satisfied with your setting, press the ENTER
button.
4. Press the EXIT button to exit.
TV
♦ Auto Adjustment
Auto adjustment allows the PC screen of set to self-adjust to
the incoming PC video signal. The values of fine, coarse and
position are adjusted automatically.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “Auto Adjustment”, then
press the ENTER button.
♦ Screen Adjustment:
Coarse/Fine
The purpose of picture quality adjustment is to remove or reduce
picture noise. If the noise is not removed by Fine-tuning alone,
then adjust the frequency as best as possible (coarse) and Finetune again. After the noise has been reduced, readjust the picture
so that it is aligned on the center of screen.
Press the ▲ or ▼ button to select "Coarse" or "Fine", then press
the ENTER button.
Press the ◄ or ► button to adjust the screen quality.
Press the ENTER button.
Position
Adjust the PC’s screen positioning if it does not fit the TV screen.
Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the ◄ or ► button to adjust the Horizontal-Position.
Press the ENTER button.
Picture
Mode
:Standard 
Backlight7
Contrast 95
Brightness 45
Sharpness 50
Auto Adjustment 

Screen Adjustment
Detailed Settings 
sMore
Enter
Return
Auto Adjustment in progress
Please wait.
Tools
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode Sleep Timer SRS TS XT
Energy Saving PIP
Auto Adjustment
Move TV
:
:
:
:
:
Standard
Custom
Off
Off
Off
Enter
Exit
Screen Adjustment
Coarse50
Fine 93
Position 
Image Reset 
Move TV
Enter
Return
Position
Image Reset
You can replace all image settings with the factory default
values.
Move TV
Move Enter
Return
Screen Adjustment
Coarse50
Fine 93
Position 
Image Reset 
Move Enter
Return
English - 34
BN68-01717L.indb 34
2008-08-18 �� 6:13:36
Connecting a USB Device
1. Press the POWER button on the remote control or front
TV Side Panel
panel.
➣ The TV is powered on.
2. Connect a USB device containing photo, music and/or
movie files to the WISELINK jack (USB jack) on the side
USB Drive
of the TV.
➣ If you enter the WISELINK Pro mode with no USB
device connected the message No external storage
device found. Check the connection status. will appear.
In this case, insert the USB device, exit the screen by
pressing the W.LINK button on the remote control and
enter the WISELINK Pro screen again.
➣ MTP (Media Transfer Protocol) is not supported.
➣ The file system only supports FAT16/32 (The NTFS file system is not supported).
➣ Certain types of USB Digital camera and audio devices may not be compatible with this TV.
➣ WISELINK Pro only supports USB Mass Storage Class devices (MSC). MSC is a Mass Storage
Class Bulk-Only Transport device. Examples of MSC are Thumb drives and Flash Card Readers
(Both USB HDD and HUB are not supported.)
➣ Please connect directly to the USB port of your TV. If you are using a separate cable connection,
there may be a USB Compatibility problem.
➣ Before connecting your device to the TV, please back up your files to prevent them from damage or
loss of data. SAMSUNG is not responsible for any data file damage or data loss.
➣ Do not disconnect the USB device while it is loading.
➣ MSC supports MP3 and JPEG files, while a PTP device supports JPEG files only.
➣ The sequential jpeg format is supported.
➣ The higher the resolution of the image, the longer it takes to display on the screen.
➣ The maximum supported JPEG resolution is 15360x8640 pixels.
➣ For unsupported or corrupted files, the “Not Supported File Format” message is displayed.
➣ If the number of photo files exceeds 4000 (or the number of music files exceeds 3000), any files
exceeding the 4000 limit may not be displayed in the Photo List (or Music List).
➣ MP3 files with DRM that have been downloaded from a non-free site cannot be played.
Digital Rights Management (DRM) is a technology that supports the creation of content, the
distribution and management of the content in an integrated and comprehensive way, including the
protection of the rights and interests of the content providers, the prevention of the illegal copying of
contents, as well as managing billings and settlements.
English - 35
BN68-01717L.indb 35
2008-08-18 �� 6:13:37
Using the WISELINK Pro Function
This function enables you to view and listen to photo, music and/or movie files saved on a USB Mass
Storage Class (MSC) device.
Entering the WISELINK Pro Menu
1. Press the MENU button. Press the ▲ or ▼ button to
select “Input”, then press the ENTERE button.
2. Press the ▲ or ▼ button to select “WISELINK Pro
(USB/DLNA)”, then press the ENTERE button.
➣ The “WISELINK Pro” menu is displayed.
WISELINK Pro
SUM
851.98MB/995.00MB Free
PHOTO
Photo
Music
Movie
Setup
SUM
e Exit
 Device
O Press the W.LINK button on the remote control to
display the “WISELINK Pro” menu.
3. Press the Red button, then press the ▲ or ▼ button to select the corresponding USB Memory
Device (i.e. if connected through a hub). Press the ENTERE button.
➣ This function differs depending on the USB Memory Device / DLNA device connected to TV.
➣ The selected USB device name appears at the bottom left of the screen.
4. Press the ◄ or ► button to select an icon (Photo, Music, Movie, Setup), then press the ENTERE
button. To exit “WISELINK Pro” mode, press the W.LINK button on the remote control.
Removing a USB Memory Device Safely
You can remove the device safely from the TV.
1. Press the TOOLS button in the WISELINK Pro file
list screen, or while a Slide Show, music or movie is
being played.
2. Press the ▲ or ▼ button to select “Remove Safely”,
then press the ENTERE button.
3. Remove the USB device from the TV.
Photo
Preference
Monthly
Timeline
SUM
image_1.jpg
Month
: Jan
Date
: Jan.01.2008
Colour
: Gray
Composition :
Folder
: P-other
Favourite : ★ ★ ★
▲
Play Current Group
Delete
Information
Remove Safely
Jan
Nov
▲
 Device  Favourites Settings  Select
Jump
Option
English - 36
BN68-01717L.indb 36
2008-08-18 �� 6:13:38
Screen Display
Photo
2
image_1.jpg
1File(s) Selected 6
Month
: Jan
Date
: Jan.01.2008
Colour
: Gray
Composition :
Folder
: P-other
Favourite
: ★★★
1
Preference
Monthly 3
Jan
SUM
5
Nov
4
▲
Timeline
7
 Device  Favourites Settings  Select
Jump
Option
1. Currently selected file: The currently selected file is highlighted. Photo and movie files are displayed
as thumbnail images.
2. Information Window: Shows information about the currently selected file. There is a separate
information window for photo and movie files only. For music files, the file information is also
displayed in the location where the file is displayed.
3. Current Sort Standard: This field shows the current standard for sorting files. Press the ▲ or ▼
button to change the standard for sorting files.
4. View Groups: Shows the sorting groups. The sorting group including the currently selected photo is
highlighted.
5. Current Device: Shows the currently selected device name. Press the Red button to select a device.
6. Item Selection Information: Shows the number of photos that are selected by pressing the Yellow
button.
7. Help Items
• Red (Device) button: Selects a connected device.
• Green (Favourites Settings) button: Changes the favourites setting for the selected file. Press
this button repeatedly until the desired value appears.
• Yellow (Select) button: Selects file from the file list. Selected files are marked with a symbol c.
Press the yellow button again to cancel a file selection.
• πµ (Jump) button: Jumps to the previous sorting group / Jumps to the next sorting group.
• TOOLS (Option) button: Displays the option menus. (The option menu changes according to the
current status.)
English - 37
BN68-01717L.indb 37
2008-08-18 �� 6:13:38
Using the Remote Control Button in WISELINK Pro Menu
Button
▲/▼/◄/►/ Wheel
ENTERE
Operations
Move the cursor and select an item.
Select the currently selected item.
While playing a slide show, movie, or music file:
- Pressing the ENTERE button during play pauses the play.
- Pressing the ENTERE button during pause resumes the play.
∂/∑
Play or pause the Play Slide Show, Music or movie.
RETURN
Return to the previous menu.
TOOLS
∫
π/µ
INFO
W.LINK
TV
EXIT
Run various functions from the Photo, Music and Movie menus.
Stop the current slide show, Music or Movie file.
Jump to previous group / Jump to next group.
Show file information.
Exit WISELINK Pro mode.
Stop WISELINK Pro mode and Returns to TV mode.
Stop the current function and return to the WISELINK Pro main menu.
Using and Sorting Photo List
You can sort photos in the Photo List by a particular standard.
1. Press the ▲ or ▼ button to select a sorting
image_1.jpg
Photo
standard in the Photo list.
Month
: Jan
Date
: Jan.01.2008
Colour
: Gray
➣ The photos are sorted according to the newly
Composition :
selected sorting standard.
Folder
: P-other
Favourite : ★ ★ ★
➣ To move to the previous / next group, press the
π (REW) or µ (FF) button.
2. Press the ∂ (Play) / ENTERE button to start
the Slide Show in the order selected by the user.
Monthly
➣ The information of a photo file is automatically
 Device  Favourites Settings  Select
SUM
set.
➣ The “Colour” and “Composition” information
extracted from a photo file may be different
from the user’s expectations.
➣ Photo information is automatically set. You can
change the “Colour”, “Composition”, and “Favourite”.
➣ Photos for which information cannot be displayed are set as “Unclassified”.
➣ PTP does not support folder sort mode.
Preference
Timeline
Jan
Nov
▲
Jump
Option
English - 38
BN68-01717L.indb 38
2008-08-18 �� 6:13:39
Sorting Standard for the Photo List
• Monthly
It sorts and shows photos in the file by month. It sorts only by month (from January to December)
regardless of year.
• Timeline
It sorts and shows photos by date. It sorts by year and month from the earliest photo.
• Colour
It Sorts photos by colour. You can change the photo colour information.
➣ “Colour” options: Red, Yellow, Green, Blue, Magenta, Black, Gray, Unclassified.
• Composition
It Sorts photos by composition. You can change the compositional information of photos.
➣ “Composition” options:
(horizontal),
(vertical),
(object),
(perspective),
Unclassified.
(pattern),
• Folder
It Sorts photos by folder. If there are many folders in USB, the photos files are shown in order in each
folder. The photo file in the Root folder is shown first and the others are shown in alphabetical order by
name.
• Preference
It Sorts photos by preference (Favourite). You can change the photo preferences.
➣ Changing the Favourites setting
Select the desired photo in the Photo list, then press the Green button repeatedly until the desired
setting appears.
➣ “Favourite” options: ★ ★ ★ , ★ ★ ★ , ★ ★ ★ , ★ ★ ★
Photo List Option Menu
• Slide Show
Using this menu, you can play a SlideShow using the
photo files on the USB memory device.
Photo
image_1.jpg
Month
: Jan
Date
: Jan.01.2008
Colour
: Gray
Composition :
Folder
: P-other
Favourite : ★ ★ ★
• Play Current Group
Using this menu, you can play a SlideShow using only
the photo files in the currently selected sorting group.
• Delete
Using this menu, you can delete the selected photo files.
Preference
Monthly
Timeline
SUM
Slide Show
Play Current Group
Delete
Information
▼
Jan
Nov
▲
 Device  Favourites Settings  Select
Jump
Option
• Change Group
You can change the “Colour” and “Composition” information of photo files.
➣ The group information of the current file is updated and the file is moved to the new group.
➣ To change the information of multiple files, select the files you want by pressing the yellow button.
English - 39
BN68-01717L.indb 39
2008-08-18 �� 6:13:39
• Information
The photo file information including, the name, the size, the resolution, the date modified and the path is
displayed.
➣ You can view the information of photo files during a SlideShow using the same procedures.
O Alternatively, select a photo from the photo list and
press the INFO button to view the information.
• Remove Safely
You can remove the device safely from the TV.
Viewing a Photo or Slide Show
Viewing a Slide Show
1. Press the ◄ or ► button to select the desired
photo in the Photo list.
2. Press the TOOLS button.
3. Press the ▲ or ▼ button to select “Slide Show”,
then press the ENTERE button.
➣ All files in the photo list will be used for the
Slide Show.
► Normal 20/22
➣ During the slide show, files are displayed in order
SUM
image_1.jpg
E Pause
440x440
Previous
Next
2.0KB
2008/1/1
Option
Return
from the currently shown file.
➣ The Slide Show progresses in the order sorted in the Photo list.
➣ Music files can be automatically played during the Slide Show if the “Background Music” is set to
“On”. (Refer to page 42).
➣ While a photo list is displayed, press the ∂(Play)/
ENTERE button on the remote control to start slide
show.
➣ SlideShow Control Buttons
ENTERE
Play/Pauses the Slide Show.
∫
∂
Play the Slide Show.
TOOLS
∑
Pause the Slide Show.
π/µ
Exit Slide Show and return to the
photo list.
Run various functions from the
Photo menus.
Change the Slide Show playing
speed.
English - 40
BN68-01717L.indb 40
2008-08-18 �� 6:13:40
Playing current group
1.
2.
3.
4.
Press the ▲ or ▼ button to select a sorting standard.
(“Monthly”, “Timeline”, “Colour”, “Composition”, “Folder”, “Preference”)
Press the π (REW) or µ (FF) button to select the desired group.
Press the TOOLS button.
Press the ▲ or ▼ button to select “Play Current Group”, then press the ENTERE button.
➣ Only the photos in the sorting group including the selected files will be used for the Slide Show.
To perform a SlideShow with only the selected files
1. Press the ◄ or ► button to select the desired photo in the Photo list.
2. Press the yellow button. Repeat the above operation to select multiple photos.
➣ The c mark appears to the left of the selected photo.
➣ If you select one file, the SlideShow will not be performed.
➣ To deselect all selected files, press the TOOLS button and select “Deselect All”.
3. Press the ∂ (Play) / ENTERE button.
➣ The selected files will be used for the Slide Show.
Slide Show Option Menu
• Stop Slide Show / Start Slide Show
You can start or stop a SlideShow.
Tools
• Rotate
You can rotate photos saved on a USB memory device.
➣ Whenever you press the ◄ button, it rotates by
270˚, 180˚, 90˚, and 0˚.
➣ Whenever you press the ► button, it rotates by 90˚,
180˚, 270˚, and 0˚.
➣ If you have select “Zoom”, the “Rotate” deactivated.
Stop Slide Show
Rotate
Zoom
Slide Show Speed : Normal
Background Music :
Off
Background Music Setting
Information
Remove Safely
U Move
E Enter
e Exit
• Zoom
You can magnify photos saved on a USB memory device. (x1 → x2 → x4)
➣ To move the enlarged photo image, press the ENTERE button, then press the ▲/▼/◄/►
buttons. Note that when the enlarged picture is smaller than the original screen size, the location
change function doesn’t work.
➣ The enlarged file is not saved.
• Slide Show Speed
You can select the slide show speed.
➣ You can select the Slide Show speed only during a slide show.
➣ You can also change the speed of the Slide Show by pressing the π (REW) or µ (FF) button
during the Slide Show.
English - 41
BN68-01717L.indb 41
2008-08-18 �� 6:13:40
• Background Music → On / Off
If you set “Background Music” to On, the background music will be played when viewing photos one by
one or in a Slide Show.
If you set “Background Music” to On, a screen appears immediately where you can set the Background
Music.
To use this feature, there must be music and photo files stored on the USB device.
• Background Music Setting
You can select background music when watching a SlideShow.
➣ If you turn off the “Background Music”, even if the “Background Music Settings” have been set up,
the background music will not be played.
➣ Loading music files is needed to change BGM mode. Play music files in music category to load.
• BGM Mode → Mood / Selected File / Shuffle
• BGM Mood → Energetic / Rhythmical / Sad / Exciting / Calm
➣ If you set “BGM Mode” to “Mood”, you can select a mood.
➣ You cannot select a mood not part of the music files on the USB memory device.
• Select Music File
➣ If you set “BGM Mode” to “Selected File”, you can select a music file.
• Information
The photo file information is displayed.
• Remove Safely
You can remove the device safely from the TV.
Using and Sorting the Music List
You can sort music files in the Music List by a particular standard.
1. Press the ▲ or ▼ button to select a sorting
Music
standard in the Music list.
Thanks
I Love You
Better than yesterday
➣ Music files are sorted according to the newly
selected sorting standard.
Jee
Darby
Catherine
➣ To move to the previous / next group, press the
π (REW) or µ (FF) button.
Energetic
★★★
Sad
★★★
Calm
★★★
2. Press the ENTERE button to start playing music
Title
in the order selected by the user.
➣ The information of the music files is
 Device  Favorites Settings  Select
Jump
Option
SUM
automatically set.
➣ The “Mood” information extracted from a music
file may differ from the expectations of the user.
➣ Music information is automatically set. You can change the “Mood” and “Favourite”.
➣ Music files for which information cannot be displayed are set to “Unclassified”.
➣ If there is no title information for a music file, the filename is displayed.
➣ If no information is available for the Genre, Artist, Album, or Year, the corresponding item is
displayed as blank.
Album 1
2005
Pop
Preference
Artist
Album 2
2005
Pop
F
G
H
I
▲
Album 3
2005
Pop
J
L
P
S
T
V
English - 42
BN68-01717L.indb 42
2008-08-18 �� 6:13:40
Sorting Standard for the Music List
• Title
It sorts the Music titles in symbol/Number/alphabet/special order, and shows the music file.
• Artist
It sorts the music file by artist in symbol/Number/alphabet/special order.
• Mood
It sorts music files by the mood. You can change the music mood information.
➣ “Mood” options: Energetic, Rhythmical, Sad, Exciting, Calm, Unclassified
• Genre
It sorts music files by the genre.
• Folder
It sorts music files by the folder. If there are many folders in USB, the files are shown in order in each
folder. The music file in the Root folder is shown first and the others are shown in alphabetical order by
name.
• Preference
It sorts music files by preference (Favourite). You can change the music files preferences.
➣ Changing the Favourites setting
➣ Select the desired music file in the Music list, then press the Green button repeatedly until the
desired setting appears.
➣ To change the information of multiple files, select files by pressing the yellow button.
➣ “Favourite” options: ★ ★ ★ , ★ ★ ★ , ★ ★ ★ , ★ ★ ★
Music List Option Menu
• Play Current Group
Using this menu, you can only play music files in the
currently selected sorting group.
• Delete
Using this menu, you can delete the selected music
files.
Music
Thanks
Sad
than Group
yesterday
PlayBetter
Current
Delete
Catherine
Change Group
Album 3
Information2005
Pop
I Love You
Jee
Darby
Album 1
2005
Pop
Album 2
2005
Pop
★★★
Sad
▼
★★★
• Change Group
Mood
You can change the mood information of music files.
The group information of the current file is updated and
 Device  Favorites Settings  Select
SUM
the file is moved to the new group.
➣ To change the information of multiple files, select files by pressing the yellow button.
Artist
Genre
Rhythmical
Sad
▲
Exciting
Exciting
★★★
Calm
Jump
...
Option
• Information
The music file information including the name, the size, the date modified and the path is displayed.
➣ You can view the information of music files during a SlideShow using the same procedures.
O Alternatively, select a music file from the music list
and press the INFO button to view the information.
• Remove Safely
You can remove the device safely from the TV.
English - 43
BN68-01717L.indb 43
2008-08-18 �� 6:13:40
Playing a Music
Playing a music file
1. Pressing the ◄ or ► button to select a music file to
7/14
00:01:15
00:05:41
be played,
I Love You
2. Press the ∂ (Play) / ENTERE button.
➣ This menu only shows files with the MP3 file
extension. Files with other file extensions are
not displayed, even if they are saved on the
same USB device.
➣ π (REW) or µ (FF) buttons do not function
during play.
Pause
Previous
Next
Option
Return
SUM
➣ The selected file is displayed at the top with its
playing time.
➣ To adjust the music volume, press the volume button on the remote control. To mute the sound,
press the MUTE button on the remote control.
➣ The playing duration of a music file may be displayed as ‘00:00:00’ if its playing time information
is not found at the start of the file.
➣ Music Play Control Buttons
ENTERE
Play/Pauses the music file.
∂
Play the music file
∑
Pause the music file
∫
TOOLS
Exit play mode and return to the
music list.
Run various functions from the
Music menus.
➣ Music function information icon
When all music files in the folder (or the selected file) are repeated. “Repeat Mode” is “On”.
When all music files in the folder (or the selected file) are played once. “Repeat Mode” is
“Off”.
Playing the music group
1.
2.
3.
4.
Press the ▲ or ▼ button to select a sorting standard.
(“Title”, “Artist”, “Mood”, “Genre”, “Folder”, “Preference”)
Press the π (REW) or µ (FF) button to select the desired group.
Press the TOOLS button.
Press the ▲ or ▼ button to select “Play Current Group”, then press the ENTERE button.
➣ The music files in the sorting group including the selected file are played.
Playing the selected music files
1. Press the ◄ or ► button to select the desired music file in the music list.
2. Press the yellow button. Repeat the above operation to select multiple music files.
➣ The c mark appears to the left of the selected music file.
3. Press the ∂ (Play) / ENTERE button.
➣ Only the selected file is played.
English - 44
BN68-01717L.indb 44
2008-08-18 �� 6:13:40
Music Play Option Menu
• Repeat Mode → On / Off
You can play music files repeatedly.
Tools
Repeat Mode
• Information
The music file information is displayed.
◄
On
►
Information
Remove Safely
• Remove Safely
You can remove the device safely from the TV.
U Move
L Adjust
e Exit
Using and Sorting the Movie List
You can sort movies in the Movie List by a particular standard.
Movie
1. Press the ▲ or ▼ button to select a sorting
standard in the Movie list.
➣ The movie files are sorted according to the
newly selected sorting standard.
➣ To move to the previous / next group, press the
π (REW) or µ (FF) button.
2. Press the ∂ (Play) / ENTERE button to play
Title
the movie in the order selected by the user.
SUM
➣ The movies are sorted according to the newly
selected sorting standard.
➣ Movie information is automatically set. You can
change the “Favorite”.
Preference
movie_1.jpg
Date
Folder
Favourite
SYMBOL
□
: Jan.01.2008
: movie-folder
: ★★★
ENG
A
M
▲
Timeline
 Device  Favourites Settings  Select
Jump
Option
Sorting Standard for the Movie List
• Title
It sorts and displays the Movie titles in symbol/Number/alphabet/special order.
• Timeline
It sorts and shows movies by date. It sorts by year and month from the earliest movie.
• Folder
If there are many folders in USB, the movies files are shown in order in each folder. The movie file in the
Root folder is shown first and the others are shown in alphabetical order by name.
• Preference
It sorts movies by preference. (Favorite) You can change the movie preferences.
➣ Changing the Favourites setting
➣ Select the desired movie file in the movie list, then press the Green button repeatedly until the
desired setting appears.
➣ “Favourite” options: ★ ★ ★ , ★ ★ ★ , ★ ★ ★ , ★ ★ ★
English - 45
BN68-01717L.indb 45
2008-08-18 �� 6:13:41
Movie List Option Menu
• Play Current Group
Using this menu, you can only play movie files in the
currently selected sorting group.
Movie
movie_1.jpg
Date
Folder
Favourite
: Jan.01.2008
: movie-folder
: ★★★
• Delete
Using this menu, you can delete the selected movie files.
• Information
The movie file information including the name, the size,
the date modified and the path is displayed.
Preference
Title
Timeline
SUM
SYMBOL
Play Current Group
Delete
Information
Remove Safely
ENG
A
□
M
▲
 Device  Favourites Settings  Select
Jump
Option
O Alternatively, select a movie file from the movie list
and press the INFO button to view the information.
• Remove Safely
You can remove the device safely from the TV.
Playing a Movie File
Playing a movie file
1. Pressing the ◄ or ► button to select a movie to
1/5
00:00:48
00:23:05
be played,
ABC.avi
2. Press the ∂ (Play) / ENtERE button.
➣ The selected file is played.
➣ The selected file is displayed at the top with its
playing time.
➣ The playing duration of a movie file may be
displayed as ‘00:00:00’ if its playing time
information is not found at the start of the file.
E Pause
-20sec
+20sec
Option
Return
SUM
➣ You can watch exciting gaming multimedia fi
les, but the gaming function is not supported.
➣ Movie doesn’t support subtitles. (for example, not support smi, srt and sub files, etc and not
support subtites included in movie files)
Manufactured under license from Dolby Laboratories. Dolby and the doubleD symbol are trademarks of Dolby Laboratories.
English - BN68-01717L.indb 46
2008-08-18 �� 6:13:42
➣ Supported Video Formats
Video Codec Type
XviD
MPEG2
H.264 HP
MPEG-4 ASP
H.264 HP
MPEG-4 ASP
Video Codec
Resolution (Max)
720 x 576
720 x 576
1920 x 1088
720 x 576
1920 x 1088
720 x 576
PS
MPEG2
1920 x 1088
24/25/30
TS
MPEG2
1920 x 1088
24/25/30
Container Type
avi
mp4
Audio codec
Frame Rate
24/25/30
24/25/30
24/25/30
AC3, MPEG1 (Layer
1, 2, 3), PCM
ADPCM (MS, IMA),
AAC LC
AC3, MPEG1 (Layer
1, 2, 3), LPCM
AC3, MPEG1 (Layer
1, 2, 3), LPCM
➣ Video Play Control Buttons
Play/Pause Movie file
ENTERE
∂
Play the movie file
∑
Pause the movie file
∫
Exit play mode and return to the movie list.
TOOLS
Run various functions from the movie menus.
◄ / ►/ Wheel
Skip forwards or backwards through the movie file in 20 second intervals.
▲ / ▼/ Wheel
Play the next file or the previous file.
➣ Movie function information icon
When all movie files in the folder (or the selected file) are repeated.
“Repeat Mode” is “On”.
When all movie files in the folder (or the selected file) are played once.
“Repeat Mode” is “Off”.
Playing the movie group
1.
2.
3.
4.
Press the ▲ or ▼ button to select a sorting standard. (“Title”, “Timeline”, “Folder”, “Preference”)
Press the π (REW) or µ (FF) button to select the desired group.
Press the TOOLS button.
Press the ▲ or ▼ button to select “Play Current Group”, then press the ENTERE button.
Playing the selected movie files
1. Press the ◄ or ► button to select the desired movie file in the movie list.
2. Press the yellow button. Repeat the above operation to select multiple music files.
➣ The cmark appears to the left of the selected movie file.
3. Press the ∂ (Play) / ENTERE button.
➣ Only the selected file is played.
English - 47
BN68-01717L.indb 47
2008-08-18 �� 6:13:42
Playing movie continuously
If you exit playing movie, playing it continuously later is possible.
With “Play continuously” function, you can watch movie without watching again from beginning or
bothering searching.
1. Select movie file you want to play continuously by pressing ◄ or ► button from the Movie List.
2. Press the ∂ (Play) / ENTERE button.
3. Select play continuously by pressing Blue button.
➣ Movie will begin to play from where it was stopped being played.
➣ If “Cont. movie play help” function was set “On”, a pop-up message will appear when you play
movie file you want to play continuously. (Refer to page 49)
4. To exit “WISELINK Pro” mode, press the W.LINK button on the remote control.
Movie Play Option Menu
• Repeat Mode
You can play the movie repeatedly.
Tools
• Picture Size
– Fit: Play video at the TV screen size.
Repeat Mode
◄
On
Picture Size
:
Fit
►
Information
Remove Safely
– Original: Play video at the original size.
U Move
L Adjust
e Exit
• Information
The movie file information is displayed.
• Remove Safely
You can remove the device safely from the TV.
English - 48
BN68-01717L.indb 48
2008-08-18 �� 6:13:42
Deleting the Photo/Music/Movie File
1. Press the ◄ or ► button to select the desired file in
image_1.jpg
Photo
the Photo/Music/Movie list.
Month
: Jan
Slide Show
Date
: Jan.01.2008
Play Current Group
Colour
: Gray
➣ To delete multiple files, select files by pressing
Composition :
Delete
the yellow button.
Folder
: P-other
Information
Favourite : ★ ★ ★
2. Press the TOOLS button.
3. Press the ▲ or ▼ button to select “Delete” (or
“Delete selected File”), then press the ENTERE
button.
Monthly
4. Press the ◄ or ► button to select “OK”, then press
 Device  Favourites Settings  Select
Jump
Option
SUM
the ENTERE button.
➣ The file is deleted.
➣ When a read-only file is deleted, the “This File is read-only file. Delete it?” message appear.
➣ Read-only files among multiple files cannot be deleted.
➣ If you select “Cancel”, the deletion is cancelled.
➣ While removing files, don’t remove the USB memory device.
➣ You cannot remove the PTP-connected digital camera picture files.
➣ You cannot recover deleted Photo/Music/Movie files.
▼
Preference
Jan
Nov
▲
Timeline
Using the Setup Menu
Setup displays the user settings of the WISELINK Pro
menu.
1. Press the W.LINK button on the remote control to
display the WISELINK Pro menu.
2. Press the ◄ or ► button to select “Setup”, then
press the ENTERE button.
3. Press the ▲ or ▼ button to select the desired
option.
4. Press the ◄ or ► button to select the option, then
press the ENTERE button.
➣ To exit WISELINK Pro mode, press the W.LINK
button on the remote control.
WISELINK Pro
Photo
Music
Movie
SUM
Setup
 Device
e Exit
Setup
Slide Show Speed
Music Repeat Mode
Movie Repeat Mode
Cont. movie play help
Screen Saver Run Time
Information
Remove Safely
• Music Repeat Mode → On/Off
Select to repeatedly play music files.
• Cont. movie play help → On/Off
Select to display the help pop-up message for
continuous movie playback.
851.98MB/995.00MB Free
Setup
• Slide Show Speed → Fast/Slow/Normal
Select to control the slide show speed.
• Movie Repeat Mode → On/Off
Select to repeatedly play movie files.
SUM
SUM
 Device
◄ Normal ►
:
On
:
On
:
On
:
3 min
Move
Adjust
Return
• Screen Saver Run Time → 1 min/3 min/5 min
Select to set the waiting time before the screen saver appears.
• Information
Select to viewing the information of the connected device.
• Remove Safely
You can remove the device safely from the TV.
English - 49
BN68-01717L.indb 49
2008-08-18 �� 6:13:43
Setting the DLNA Network
DLNA allows you to watch videos and pictures saved on your PC on your TV through a network
connection in Wiselink Pro mode. This removes the need to copy them to a USB storage device and then
connect the device to your TV. To use DLNA, the TV must be connected to the network and the DLNA
application must be installed on your PC.
Network Connections Diagram
PC
TV
LAN
LAN
External Modem
(ADSL/VDSL/Cable TV)
1
3
2
1. Connect the [LAN] port on the rear panel of the TV to the external modem with a LAN Cable.
2. Connect the PC to which the “DLNA PC Share Manager” program will be installed and the external
modem using a LAN cable.
3. Connect the LAN port on the wall and the external modem with a Modem Cable.
➣ You can connect the TV to the PC directly without connecting it through a Sharer(Router).
Connecting to the Network
1. When connecting to the network is complete, set up the network on the TV.
➣ A Wireless Internet connection does not support DLNA.
➣ The first 3 digits (subnet address) of the IP addresses of the TV and the PC must be the same
(e.g. IP Address: 123.456.789.XX )
2. Run a “Network Test” to check the network settings.
Installing the DLNA Application
To play content on the PC on the TV, you have to first install the application.
System Requirements
1. Insert the Program CD supplied with this TV into your PC.
2. 20MB of free hard disk space is needed for the program installation.
➣ If you share files, up to 20MB of hard disk drive space is required for each 100 files.
➣ If you cancel file sharing, the hard disk drive space used for the thumbnail information is also
freed.
Supported Formats
1. Image: JPEG (jpg, jpeg)
2. Audio: MP3 (mp3)
3. Video: MPEG1(mpg, mpeg), MPEG2 PS/TS(mpg, mpeg, trp, ts, tp), divx(mpg, mpeg, avi), MPEG4 /
H.264 (mpg, mpeg)
English - 50
BN68-01717L.indb 50
2008-08-18 �� 6:13:43
Install the application
1. Run the Setup.exe file on the Program CD supplied with the product.
➣ Alternatively, you can download the file from www.samsung.com.
2. Install the SAMSUNG PC Share Manager as shown in the figures below.
►
►
►
►
►
3. When the installation is complete, the PC Share Manager icon appears on your Desktop.
➣ Double-click the icon to run the program.
English - 51
BN68-01717L.indb 51
2008-08-18 �� 6:13:43
Using the DLNA Application
The Program Screen Layout
1
2
3
4
5
6
1.
2.
3.
4.
5.
6.
7.
7
Menus: The following application menus are provided : “File”, “Share”, “Server”, and “Help”.
Click to share the selected PC server folder.
Click to cancel sharing.
Click to refresh the PC folder and files.
Click to synchronize the share status.
The folders and files of the PC to be shared are listed.
Folders shared by the user are listed.
File
Property: Shows information on the selected file or folder.
Method 1: Select a file or folder and select the “File” menu
and then select the “Property” sub-menu.
Name
Modified
Method 2: Select a file or folder, right-click over the selected
file or folder and then select “Property” from the pop-up menu.
Name
Name
English - 52
BN68-01717L.indb 52
2008-08-18 �� 6:13:44
Exit: Exits the DLNA application.
If you select “Exit” without applying the changes after
changing the shared status, a message will appear asking
if you want to apply the changed settings to the PC. Select
“Yes” to apply the changes and exit the application.
Name
Yes
No
Share
Sharing a Folder
You can share a folder from your PC to the TV. The
maximum number of folders that can be shared is 32.
➣ Your PC will operate as a server to the TV.
Name
Modified
Name
Modified
Name
Modified
Method 1: Select a folder in “My Computer”, select the
“Share” menu and then select the “Share Folder” sub-menu.
Method 2: Select a folder in “My Computer”, right-click over
the selected folder and then select “Share Folder” from the
pop-up menu.
Method 3: Locate the mouse pointer over a folder in the “My
Computer” folder list in the left pane and drag&drop the folder
into the Shared Folders pane. If a message appears asking
you to confirm the shared folder, select “Yes”.
Yes
No
Cancelling a Shared Folder
You can cancel a shared folder on your PC. Select a folder
from the “Shared Folder” pane and select “Unshare Folder”.
Name
Modified
Name
Modified
Method 1: Select a folder from the “Shared Folder” pane,
select the “Share” menu and then select “Unshare Folder”.
Method 2: Select a folder from the “Shared Folder” pane,
right-click over the selected folder and then select “Unshare
Folder” from the pop-up menu.
English - 53
BN68-01717L.indb 53
2008-08-18 �� 6:13:44
Method 3: Locate the mouse pointer over a folder in the
“Shared Folder” pane and drag&drop the folder into the “My
Computer” pane. If a message appears asking you to confirm
the cancelation, select “Yes”.
Name
Modified
Yes
No
Applying the Current Settings
Perform this when synchronization is necessary due to a new shared folder or canceling a shared folder.
The “Set Changed State” menu applies changes to shared folders to the data saved with the PC share
program.
Since applying changes to the internal data is a time-consuming process, this function enables users to
apply changes to the data only when required.
Until the “Set Changed State” menu is selected, the changed state of the shared folder is not applied to
the server.
Changes to the shared folders are not applied to your PC until you select the “Set Changed State” menu.
Method 1: Select the “Share” menu and select the “Refresh
DB” sub-menu.
Name
Modified
Method 2: Click the “Set Changed State” icon.
Name
Setting the Access Permission
To enable the TV to find your PC, the TV must be set to “Set
Device Policy” in the Access Permission Settings window.
In addition, the PC server and the TV must be on the same
subnet.
Method: Select the “Share” menu and select “Set Device
Policy”.
Rejected items are represented in gray.
You can change the access permissions by using the Allow
“Accept”/”Deny” button.
To delete an item, select the item and select “Delete Item”.
English - 54
BN68-01717L.indb 54
2008-08-18 �� 6:13:44
Server
Server
You can run or stop using your PC as a server.
Run DLNA Digital Media Server when Windows Starts
You can determine whether to start the PC server automatically when Windows starts.
Change server name
You can rename the PC server. Enter a new name and
click “OK”. The new name will appear at the top right of the
window and will appear on the TV.
Name
Modified
Name
Modified
Name
Help
Version
The program version information message box appears.
Name
Modified
English - 55
BN68-01717L.indb 55
2008-08-18 �� 6:13:45
Using the DLNA Function
Using the DLNA Menu
DLNA (Digital Living Network Alliance) enables content
DLNA : Server
WISELINK Pro
saved on a DLNA server (usually your PC) connected
to your TV or over a network to be played.
PHOTO
Wiselink Pro enables playing content saved on a USB
memory device connected to the TV, while DLNA
enables playing content saved on a DLNA server (your
PC) connected to your TV or over the network. The
procedures to use the content are the same as those
for WISELINK Pro.
Photo
Music
Movie
Setup
SUM
If you install the PC share manager program supplied
 Device e Exit
with the TV onto a PC, you can have the PC perform
the role of a DLNA server over the network.
1. Press the W.LINK button on the remote control to display the “DLNA” menu.
2. Press the ◄ or ►button to select an icon (Photo, Music, Movie, Setup), then press the ENTERE
button.
➣ To exit “DLNA” mode, press the W.LINK button on the remote control.
Photo
• Photo List option menu
Sorting Photo List / Viewing the Information / Rotating the Photo file / Viewing a Slide Show.
• During a Slide Show option menu
Play & Pause / Slide Show Speed / Zoom / Rotate
Music
• Music List option menu
Sorting Music List / Viewing the Information / Playing a music file
• Music Play Option Menu
Play & Pause / Repeat Mode
Movie
• Movie List option menu
Sorting Movie List / Viewing the Information / Playing a Movie file
• Movie Play Option Menu
Play & Pause / Repeat Mode
Setup
Slide Show Speed / Music Repeat Mode / Movie Repeat Mode / Screen Saver Run Time / Information
➣ DLNA does not support the following functions.
- The Background Music and Background Music Setting functions.
- Sorting files by preference in the Photo, Music, and Movie folders.
- The Change Group Info function.
- The Delete function.
- The Safe Remove function.
- The π (REW) / µ (FF) button functions while a movie is playing.
➣ The Skip (◄/► button) or Pause function may not work while a movie is playing for the DLNA of
other manufacturers, depending on the corresponding content information.
➣ The playing time may not be displayed while a movie is playing.
English - 56
BN68-01717L.indb 56
2008-08-18 �� 6:13:45
Activating the Content Library
The “Content Library” enables you to view or play the built-in contents on the TV or stored on your USB
device. The Delete, Move and Update functions will not work with the built-in content on the TV.
1. Press the MENU button. Press the ▲ or ▼ button to
Input
TV
select “Input”, then press the ENTERE button.
Source List
:TV 
Edit Name 
2. Press the ▲ or ▼ button to select “Content Library”,
Anynet+(HDMI-CEC)
WIESLINK Pro (USB/DLNA)
then press the ENTERE button.
Content Library
Product Guide
➣ The “Content Library” main menu is displayed.
Move Enter
Return
O Press the CONTENT button on the remote control to
display the “Content Library” main menu.
3. Press the ◄ or ► button to select an icon (Gallery,
Cooking, Game, Children, Fitness), then press the
ENTERE button.
➣ The selected item will be run.
➣ Refer to the explanation for the button in the
display when the user uses the button while
content is running.
Content Library
Gallery
Gallery
Cooking
 Setup
Button
Wheel (▲/▼/◄/►)
ENTERE
RETURN
EXIT
TV
Colour button
– VOL +
CONTENT
Game
 USB
Children
Fitness
R Return
e Exit
Operations
Move the cursor and select an item.
Select the currently selected item.
Return to the previous menu.
Stop the current function and return to the “Content Library” main menu.
Stop Content Library mode and Returns to TV mode.
Button that provide functions are described on the corresponding page.
You can control the volume of the played content.
Exit Content Library mode.
Contents Library contains text, graphics, images, multimedia, and other materials for informational and promotional purposes
only. Materials in Contents Library has been modified and keeps being revised and updated. The Materials in the Contents
Library may not be suitable for all audiences.
Information in the Contents Library is provided “as is.” Although the information provided to you in the Contents Library
is obtained or complied from sources we believe to be reliable, Samsung cannot and does not guarantee the accuracy,
validity, timeliness or completeness of any information or data made available to you for any particular purpose. Under
no circumstances, including negligence, shall Samsung be held liable, whether in contract or tort, for any direct, indirect,
incidental, special or consequential damages, attorney fees, expenses, or any other damages whatsoever arising out of, or
in connection with, any information contained in, or the use of, the Contents Library, even if advised of the possibility of such
damages.
English - 57
BN68-01717L.indb 57
2008-08-18 �� 6:13:45
Using the Content Library
Gallery
• Art/Relaxation/Party
This function plays a SlideShow with high resolution images and background music and produces
various atmospheres. Using the Gallery function of the TV, you can change your home atmosphere.
➣ Press the yellow button to playback all imageries.
➣ There is default music for each for the “Art”, “Relaxation”, and “Party” options.
➣ Press INFO button to see the credit and detail information in English for the imagery. Press INFO
button again or press ► button for the credit information to go away (currently, the credit supports
English only.)
➣ The copyrights of the “Gallery” contents and all issues related to them are reserved by Gallery
Player, Inc.
➣ For additional “Gallery” contents, check for information through www.samsung.com. Please refer to
the “Using Additional Content Using External USB Memory Storage” section (page 59) to see how
to play additional imagery.
Cooking
• Starters / Main Courses / Desserts
You can view various recipes that you can then easily follow step by step. Enjoy these contents which
give you great ideas for meals.
➣ The recipes introduced in the “Cooking” contents on the Samsung TV are based on recipes
published by Anness Publishing.
➣ The copyrights of the “Cooking” contents and all issues related to them are reserved by Practical
Pictures.
Game
• Dynamic Bowling/Minimini Cook: This category provides entertainment games for the whole
family.
➣ For the buttons used in the games, refer to the directions on the screen.
➣ For the 2 embedded games, the copyrights are reserved by each of the corresponding game
providers and all issues related to copyrights are reserved by the corresponding game providers.
➣ More detail instruction on how to play a game is given at the beginning of each game page.
Children
• Story / Song / Play
This is educational and interactive content that children can watch repeatedly. Enjoy existing stories,
songs and games with the Boowa and Kwala characters.
➣ The copyrights of the “Children” contents and issues related to them are reserved by UpToTen.
English - 58
BN68-01717L.indb 58
2008-08-18 �� 6:13:45
Fitness (depending on the country)
• basic Stretches / Massage
This is beneficial health management content that provides stretching and massage exercises that can
be enjoyed by the whole family.
➣ This is beneficial health management content that provides stretching and massage exercises that
can be enjoyed by the whole family. The “Basic Stretches” contents for the Samsung TV are based
on the book Stretching by Suzanne Martin which is published by DK and the “Massage” contents are
based on the books published by Anness Publishing.
➣ The copyrights to “Basic Stretches” are reserved by the DK Publishing Company. The copyrights
to the “Massage” content are reserved by Practical Pictures. All issues related to copyrights are
reserved by the corresponding company.
Using the Remote Control button in Fitness menu
button
Wheel (◄/►)
ENtERE
Operations
View to previous step / View to next step
Play or pause (in Basic and Advanced Stretches)
Screen Saver Run time
• Off / hour / hour / 10 hour
Select to set the waiting time before the screen saver appears.
Press the yellow button to select “Setup” in the “Content Library” main menu.
Using Additional Content Using External USb Memory Storage
You can download contents onto a USB memory device and play them on your TV. (The contents on the
external USB device are played directly without being copied to the built-in Flash memory of the TV.)
Playing and Exiting New Content
1. Press the Red button in the “Content Library” main
menu.
➣ The USB Browser main screen is displayed.
➣ A list of files saved on the USB device is
displayed.
2. Press the ▲ or ▼ button to move to the file (or
folder) you want to play. Press the ENtERE
button.
➣ The selected content is played.
➣ Not support game program.
➣ The use of contents is the same as in using
the TV memory contents.
➣ To return to the USB browser main screen,
press the EXIt button.
➣ To exit “Content Library” mode, press the
P>/< button on the remote control.
Content Library
Gallery
Gallery
Game
Cooking
 Setup
Content Library
 USB
Children
Fitness
R Return
USB
e Exit
<< 1/1 >>
Cooking
Gallery
Cooking
Fitness
Children
▼
 TV Memory
 Show UDN
▲
R Return
English - 9
BN68-01717L.indb 59
2008-08-18 �� 6:13:46
➣ “Content Library” only supports USB Mass Storage Class devices (MSC). MSC is a Mass
Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives and Flash Card
Readers (Both USB HDD and HUB are not supported.)
Downloading New Contents
New content other than the built-in contents will be provided via the Samsung.com website with or without
charge.
• Downloading Content
1. Visit the www.samsung.com website and open the Content Library page.
2. Enter the product number (UDN, Unique Device Number) when it is asked.
3. Select a content item in the Contents Download page.
4. Download the contents onto the USB memory device.
➣ “Content Library” only supports USB Mass Storage Class devices (MSC). MSC is a Mass
Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives and Flash Card
Readers (Both USB HDD and HUB are not supported.)
5.Go to “Content Library” main menu by pressing “Contents” button or choosing “Content Library”
(Menu → Input → “Content Library”)
6. Plug the USB memory into USB port on the side of the TV.
• Finding a product number (Unique Device Number, UDN)
1. Insert the USB memory into the USB port on the side of the TV.
2. In the USB Browser main screen, press the Green button (Show UDN).
3. The 18-digit number on the screen is the product code.
• Provided Content
- Additional contents are available on www.samsung.com.
English - 60
BN68-01717L.indb 60
2008-08-18 �� 6:13:46
What is Anynet+?
Anynet+ is an AV network system that enables an easy-to-use AV interface for users by controlling
all connected AV devices through the Anynet+ menu when Samsung Electronics AV devices are
connected.
Connecting Anynet+ Devices
The Anynet+ system supports AV devices supporting Anynet+ only.
Check if there is an Anynet+ mark on the AV device to be connected to the TV.
To directly connect to TV
TV
Anynet+
Device 1
HDMI 1.3 Cable
Anynet+
Device 2
HDMI 1.3 Cable
Anynet+
Device 3
HDMI 1.3 Cable
Anynet+
Device 4
Connect the [HDMI 1],
[HDMI 2], [HDMI 3]
or [HDMI 4] jack
on the TV and the
HDMI OUT jack of
the corresponding
Anynet+ device using
the HDMI cable.
HDMI 1.3 Cable
To connect to Home Theater
TV
Anynet+
Device 1
Home Theatre
HDMI 1.3 Cable
Anynet+ Device 2
HDMI 1.3 Cable
➣
➣
➣
➣
HDMI 1.3 Cable
Anynet+ Device 3 Anynet+ Device 4
HDMI 1.3 Cable
HDMI 1.3 Cable
1. C
onnect the
[HDMI 1],
[HDMI 2],
[HDMI 3] or
[HDMI 4] jack
on the TV and
the HDMI OUT
jack of the
corresponding
Anynet+ device
using the HDMI
cable.
2. Connect the
HDMI IN jack of
the home theatre
and the HDMI
OUT jack of the
corresponding
Anynet+ device
using the HDMI
cable.
Connect only one receiver.
You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support
Anynet+ functions.
Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.
Anynet+ supports up to 8 AV devices in total.
English - 61
BN68-01717L.indb 61
2008-08-18 �� 6:13:46
Setting Up Anynet+
The following settings are to use Anynet+ functions.
Using the Anynet+ Function
1. Press The TOOLS button. Then Press the ENTER button to
select "Anynet+(HDMI-CEC)".
Press the ▲ or ▼ button to select "Setup", then press the
ENTER button.
2. Press the ENTER button to select "Anynet+ (HDMI-CEC)",
then press the ENTER button.
3. Press the ▲ or ▼ button to select "On", then press the
ENTER button.
➣ The "Anynet+ (HDMI-CEC)" function is enabled.
➣ If you select "Off", "Anynet+ (HDMI-CEC)" is disabled.
➣ When the "Anynet+ (HDMI-CEC)" function is disabled, all the
Anynet+ related operations are deactivated.
Tools
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode Sleep Timer SRS TS XT
Energy Saving Dual l-ll Move TV
:
:
:
:
:
:
Standard
Custom
Off
Off
Off
Mono
Enter
Exit
P9
View TV
Select Device

Record

Menu on Device

Device Operation

Receiver

:Off
Setup
Move Return

Enter
Setup
Anynet+ (HDMI-CEC)
: Off
Off
Auto Turn Off : Off
On
Searching Connections
Move Enter
Return
Turning an Anynet+ Device Off Automatically when the TV is Turned Off
1. Press the ▲ or ▼ button to select "Auto Turn Off", then press
the ENTER button.
2. Press the ▲ or ▼ button to select "Yes", then press the
ENTER button.
➣
➣
➣
➣
The "Auto turn off" function is enabled.
If you select "No", the "Auto turn off" function is cancelled.
Setup
Anynet+ (HDMI-CEC)
: On
Auto Turn Off : Off
Searching Connections
No
Yes
Move Enter
Return
Press the EXIT button to exit.
The Select Device setting of the TV remote control is to be set
to TV to use the Anynet+ function.
If you set "Auto Turn Off" to "Yes", connected external devices are also turned off when the TV is
turned off. However, if the device is recording, it may not be turned off.
English - 62
BN68-01717L.indb 62
2008-08-18 �� 6:13:47
Scanning and Switching between Anynet+ Devices
1. Press the TOOLS button.
TV
P9
Then press the ENTER button to select "Anynet+(HDMIView TV
CEC)".

Select Device
2. Press the ▲ or ▼ button to select "Select Device", then press

Record
Menu on Device

the ENTER button.

Device Operation
3. Press the ▲ or ▼ button to select to a particular device and
Receiver :Off

press the ENTER button. It is switched to the selected device.

Setup
4. If you cannot find a device you want, press the ▲ or ▼ button to
Move Enter
Return
select "Setup", then press the ENTER button.
Setup
5. Press the ▲ or ▼ button to select "Searching Connections",
then press the ENTER button.
Anynet+ (HDMI-CEC)
: On

The message "Configuring Anynet+ connection" is displayed.
Auto Turn Off : Yes

When searching devices completes, the connected devices are Searching Connections 
listed in the Anynet+ menu.
➣ Switching to the selected devices may take up to 2 minutes.
Move Enter
Return
You cannot cancel the operation during the switching
operation.
➣ The time required to scan for devices is determined by the number of connected devices.
➣ When the device scan is complete, the number of found devices is not displayed.
➣ Although the TV automatically scans devices when it is turned on using the POWER button, devices
connected when the TV is on or under a specific circumstance are not displayed in the device list.
Therefore select "Searching Connections" menu to search devices.
➣ If you have selected external input mode by pressing the SOURCE button, you cannot use the
Anynet+ function. Make sure to switch to an Anynet+ device by using the TOOLS button.
English - 63
BN68-01717L.indb 63
2008-08-18 �� 6:13:48
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected
to the TV.
Anynet+ Menu
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver
Setup
Description
Switches from Anynet+ to TV broadcast mode.
Your TV connects to the corresponding device.
Starts a recording. (This menu works only for a device supporting
recording.)
Shows the menu of the connected device.
Example. When a DVD Recorder is connected, the DVD Recorder’s
title menu appears.
Shows the play control menu of the connected device.
Example. When a DVD Recorder is connected, the play control
menu of the DVD Recorder appears.
Sound is output through the receiver.
You can set the environment for using Anynet+.
TV Remote Control Buttons Available in Anynet+ Mode
Device Type
Anynet+ Device
Operating Status
After switching to the
device, when the menu of
the corresponding device is
displayed on the screen.
Available Buttons
Numeric buttons
▲/▼/◄/►/ENTER buttons
Colour buttons
EXIT button
After switching to the device,
while playing a file
(Backward search)/
(Forward search)/
(Stop)/
(Play)/
(Pause)
Device with built-in Tuner
After switching to the device,
when you are watching a TV
programme
P
Audio Device
When Receiver is activated
VOL - / + button
MUTE button
➣
➣
➣
➣
➣
➣
➣
/
button
The Anynet+ function only works when the remote control is set to TV.
The
button works only while in the recordable state.
You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices
only using the TV remote control.
The TV remote control may not work under certain conditions. In this case, re-select the Anynet+
device.
The Anynet+ functions don’t operate for the products from other manufacturers.
In Anynet+ mode, the colour buttons may not work properly.
The
,
operations may differ depending on the device.
English - 64
BN68-01717L.indb 64
2008-08-18 �� 6:13:48
Recording
You can make a recording of a TV programme using a recorder.
Press the
button.
Recording begins. (Only when the Anynet+ enabled recording device is connected.)
➣ The current TV programme is recorded in the Watching TV status. If you are watching video from
another device, the video from the device is recorded.
➣ You can also record the source streams by selecting Record after pressing the TOOLS button.
➣ Before recording, check whether the antenna jack is properly connected to the recording device.
For the antenna connection to the recording device, refer to its user manual.
Listening through a Receiver
You can listen to sound through a receiver instead of the TV speaker.
1. Press the TOOLS button. Then Press the ENTER button to
select "Anynet+(HDMI-CEC)".
TV
P9
Press the ▲ or ▼ button to select "Receiver", then press the
View TV
ENTER button.

Select Device
Record

2. Press the ◄ or ► button to select to "On", then press the

Menu on Device
ENTER button.
Device Operation

Now you can listen to sound through the receiver.
Receiver :Off

3. Press the EXIT button to exit.

Setup
➣ When the receiver is set to On, you can listen to the TV sound
Move Enter
through the 2-channel receiver.
Return
➣ If the receiver is exclusively for a home theatre only
(supporting audio only), it may not appear in the device list.
➣ In case of a content with copyright problem, listening through the receiver may not properly operate.
➣ If there is a power interruption to the TV when the “Receiver” is set to “On” (by disconnecting the
power cord or a power failure), the “TV Speaker” may be set to “Off” when you turn the TV on again.
(see page 22)
English - 65
BN68-01717L.indb 65
2008-08-18 �� 6:13:48
Check Points before Requesting Service
Symptom
Anynet+ does not
work.
Solution
■
■
■
■
■
■
■
■
■
I want to start
Anynet+.
■
■
■
I want to exit Anynet+. ■
■
■
The Connecting to
Anynet+ device…
message appears on
the screen.
The Anynet+ device
does not play.
The connected device
is not displayed.
The TV programme
cannot be recorded.
■
■
Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+
devices only.
Connect only one receiver.
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Check whether the TV remote control is in TV mode.
Check whether it is Anynet+ exclusive remote control.
Anynet+ doesn’t work at a certain condition. (Searching channels, Operating
WIESLINK Pro, Plug & Play, etc.)
When connecting or removing the HDMI 1.3 cable, please make sure to search
devices again or restart your TV.
Check if the Anynet+ Function of Anynet+ device is set on.
Check if the Anynet+ device is properly connected to the TV and check if the
Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu.
Press the TV button on the TV remote control to switch to TV. Then press the
TOOLS button to show the Anynet+ menu and select a menu you want.
Select View TV in Anynet+ menu.
Press the SOURCE button on the TV remote control and select a device other
than Anynet+ devices.
Press any of P / , PRE-CH, and such to change to the TV mode. (Note that
the channel button operates only when a tuner-embedded Anynet+ device is not
connected.)
You cannot use the remote control when you are configuring Anynet+ or
switching to a view mode.
Use the remote control when the Anynet+ setting or switching to view mode is
complete.
You cannot use the play function when Plug & Play is in progress.
■
■
■
■
■
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI 1.3 cable is properly connected.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Search Anynet+ devices again.
You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI
cables may not support Anynet+ functions.
■If it is terminated by an abnormal situation such as disconnecting the HDMI 1.3
cable or power cord or a power failure, please repeat the device scan.
Check whether the antenna jack on the recording device is properly connected.
English - 66
BN68-01717L.indb 66
2008-08-18 �� 6:13:48
Teletext Feature
Most television stations provide written information services via Teletext. The index page of
the teletext service gives you information on how to use the service. In addition, you can select
various options to suit your requirements by using the remote control buttons.
➣
For teletext information to be displayed correctly, channel reception must be stable. Otherwise,
information may be missing or some pages may not be displayed.
1. (exit)
Exit from the teletext display
26 (index)
Used to display the index (contents) page at any time while you
are viewing teletext.
1
38 (store)
Used to store the teletext pages.
44 (size)
Press to display the double-size letters in the upper half of the
screen. For lower half of the screen, press it again. To display
normal screen, press it once again.
55 (reveal)
Used to display the hidden text (answers to quiz games, for
example). To display normal screen, press it again.
6/ (teletext on/mix)
Press to activate teletext mode after selecting the channel
providing the teletext service. Press it twice to overlap the teletext
with the current broadcasting screen.
71 (sub-page)
Used to display the available sub-page.
7
8
2
3
4
9
0
!
5
@
#
82 (page up)
Used to display the next teletext page.
6
93 (page down)
Used to display the previous teletext page.
00 (mode)
Press to select the teletext mode (LIST/FLOF). If you press it
in the LIST mode, it switches into the List save mode. In the
List save mode, you can save teletext page into list using the
8(store) button.
!9 (hold)
Used to hold the display on a given page if the selected
page is linked with several secondary pages which follow on
automatically. To resume, press it again.
@7 (cancel)
Used to display the broadcast when searching for a page.
#Colour buttons (red/green/yellow/blue)
If the FASTEXT system is used by a broadcasting company, the different topics covered on a teletext
page are colour-coded and can be selected by pressing the coloured buttons. Press one of them
corresponding to the required. The page is displayed with other
coloured information that can be selected in the same way. To
display the previous or next page, press the corresponding coloured
button.
➣
You can change teletext pages by pressing the numeric buttons on
the remote control.
English - 67
BN68-01717L.indb 67
2008-08-18 �� 6:13:49
The teletext pages are organized according to six categories:
Part
A
B
C
D
E
F
Contents
Selected page number.
Broadcasting channel identity.
Current page number or search indications.
Date and time.
Text.
Status information.
FASTEXT information.
➣
Teletext information is often divided between several pages
displayed in sequence, which can be accessed by:
 Entering the page number
 Selecting a title in a list
 Selecting a coloured heading (FASTEXT system)
➣ Press the TV button to exit from the teletext display.
English - 68
BN68-01717L.indb 68
2008-08-18 �� 6:13:49
Auto Wall-Mount (Sold separately) (depending on the model)
Once the auto wall mount is installed, your tV’s position can be easily adjusted.
tV Rear Panel
Auto Wall-Mount
SERVICE Cable (Not supplied)
Entering the menu
1.
Press the ▲, ▼, ◄ or ► button on your remote control.
The Auto Wall-Mount screen is displayed.
If the Auto Wall-Mount screen is not displayed when
clicking on a direction button while watching your TV, use
the menu to display that screen.
• Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the
ENtER button.
➣
➣
tV
Setup
Plug & Play
Language
: English
time
Cable Network Setup
Auto Wall-Mount
Melody
: Off
Entertainment : Off
Energy Saving : Off
PIP
Move
• Press the ▲ or ▼ button to select “Auto Wall-Mount”, then
press the ENtER button.
Enter









Return
Remembering the Position
.
.
.
.
Adjust to the desired position using the ▲,▼,◄,► buttons.
If you press an arrow button when no OSD is displayed on
the TV screen, the Adjustment screen appears.
➣ Press the INFO button to reset. Press the ◄ or ► button to
select “Yes”, then press the ENtER button.
The position is initialized to the default setting.
Auto Wall-Mount
➣
Press the blue button.
Press the ▲ and ▼ buttons to select a save mode from either
Position 1, Position 2 or Position 3 in order to save the current
position.
➣ To not save the current position, press the REtURN button.
➣ When selecting a save mode, you cannot use the Colour
buttons.
Press the ENtER button to save.
➣ When Position1 is selected, the message "Current position
saved as Position1" is displayed.
Position
1
Adjust
Save
INFO
Centre
Save
Select a mode to Save.
Position1
Position
Position
Move
Enter
Return
Press the ENtER button.
➣ The saved Position appears on the left side of the OSD.
English - 9
BN68-01717L.indb 69
2008-08-18 �� 6:13:50
Moving to the remembered position
1. Complete Step 1 of “Entering the menu”.
2. Pressing a Colour (Red, Green, Yellow) button moves the auto
wall mount to the saved position.
➣ You can move the wall mount to one of the 3 pre-set
positions by pressing the Red (Position 1),
Green (Position 2) or Yellow (Position 3) buttons.
➣ If you adjust the position after moving to a pre-set position,
the position display will disappear.
➣
➣
➣
➣
➣
Auto Wall-Mount
Position1
Position 1 2 3
Adjust Save
INFO
Centre
For installation, refer to the Installation Manual provided with the wall mount.
For product installation and the installation and moving of the wall mount, make sure to consult a
specialized installation company.
This installation manual is to be used when attaching the wall mount to a wall. When attaching to
other building materials, please contact your nearest dealer.
The auto wall mount will not work when Anynet+ and WIESLINK Pro are operating.
40 and 46 inch models are not compatible with the old electrically powered wall mount model
(WMN5090A*).
Using the Anti-Theft Kensington Lock (depending on the model)
The Kensington lock is a device used to physically fix the system when using it in a public
place. The appearance and locking method may differ from the illustration depending on the
manufacturer. Refer to the manual provided with the Kensington lock for proper use. The locking
device has to be purchased separately.
1. Insert the locking device into the Kensington
slot on the LCD TV (Figure 1), and turn it in the
locking direction (Figure 2).
2. Connect the Kensington lock cable.
3. Fix the Kensington lock to a desk or a heavy
stationary object.
➣ The place of the Kensington Lock may be
different depending on its model.
Cable
Figure 2
Figure 1
<Optional>
English - 70
BN68-01717L.indb 70
2008-08-18 �� 6:13:50
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular,
ensure your children do not hang over or destabilize the TV; doing so may cause the TV
to tip over, causing serious injuries or death. Follow all safety precautions provided on the
included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as
follows.
Wall
Wall
To avoid the TV from falling:
1. Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have
been firmly installed onto the wall.
➣ You may need additional material such a s an anchor depending on the type of wall.
➣ Since the necessary clamps, screws, and string are not supplied, please purchase these
additionally.
2. Remove the screws from the center back of the TV, put the screws into the clamps, and then
fasten the screws onto the TV again.
➣ Screws may not be supplied with the product. In this case, please purchase the screws of the
following specifications.
➣ Screw Specifications
- For a 17 ~ 29 Inch LCD TV: M4 X 15
- For a 32 ~ 40 Inch LCD TV: M6 X 15
3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and
then tie the string tightly.
➣ Install the TV near to the wall so that it does not fall backwards.
➣ It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the
clamps fixed on the TV.
➣ Untie the string before moving the TV.
4. Verify all connections are properly secured. Periodically check connections for any sign of fatigue
for failure. If you have any doubt about the security of your connections,contact a professional
installer.
English - 71
BN68-01717L.indb 71
2008-08-18 �� 6:13:51
Troubleshooting: Before Contacting Service Personnel
No sound or picture
♦ Check that the mains lead has been connected to a wall socket.
♦ Check that you have pressed the button on your set.
♦ Check the picture contrast and brightness settings.
♦ Check the volume.
Normal picture but no sound
♦ Check the volume.
♦ Check whether the MUTE button has been pressed on the remote control.
♦ Check if "TV Speaker" is on
Screen is black and power
indicator light blinks steadily
♦ On your computer check; Power, Signal Cable.
♦ The TV is using its power management system.
♦ Move the computer’s mouse or press any key on the keyboard.
No picture or black and white ♦ Adjust the colour settings.
picture
♦ Check that the broadcast system selected is correct.
Sound and picture
interference
♦ Try to identify the electrical appliance that is affecting the set and move it
further away.
♦ Plug your set into a different mains socket.
Blurred or snowy picture,
distorted sound
♦ Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
Remote control malfunctions
♦ Replace the remote control batteries.
♦ Clean the upper edge of the remote control (transmission window).
♦ Check the battery terminals.
‘Check signal cable.’
message is displayed
♦ Check that the signal cable is firmly connected to the PC or video sources.
♦ Check that the PC or video sources are turned on.
On PC mode, 'Not Supported ♦ Check the maximum resolution and the frequency of the video adaptor.
Mode.' message is displayed ♦ Compare these values with the data in the Display Modes.
The damaged picture
appears in the corner of the
screen
If "Just Scan" is selected in some external devices, the damaged picture
may appear in the corner of the screen. This symptom is caused by
external devices, not TV.
The ‘Resets all settings to
the default values’ message
appears.
This appears when you press and hold the EXIT button for a while. The
product settings are reset to the factory defaults.
You may see small particles
if you look closely at the edge This is part of the product’s design and is not a defect.
of the bezel surrounding the
TV screen.
The TFT LCD panel uses a panel consisting of sub pixels (6 220 800) which require sophisticated
technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will
have no impact on the performance of the product.
English - 72
BN68-01717L.indb 72
2008-08-18 �� 6:13:51
Specifications
Model Name
LA40A750
LA46A750
LA52A750
Screen Size
(Diagonal)
40 inches
46 inches
52 inches
1920 x 1080 @ 60 Hz
1920 x 1080 @ 60 Hz
1920 x 1080 @ 60 Hz
10W x 2
10W x 2
10W x 2
1040 x 85 x 638 mm
1040 x 272 x 686 mm
1172 x 98 x 712 mm
1172 x 300 x 766 mm
1321 x 107 x 805 mm
1321 x 338 x 861 mm
19 kg
29 kg
37 kg
PC Resolution
(Optimum)
Sound
Output
Dimensions (WxDxH)
Body
With stand
Weight
With Stand
Environmental
Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
Stand Swivel
(Left / Right)
0˚
➣ Design and specifications are subject to change without prior notice.
➣ This device is a Class B digital apparatus.
➣ For the power supply and Power Consumption, refer to the label attached to the product.
English - 73
BN68-01717L.indb 73
2008-08-18 �� 6:13:51
Download PDF