CD300 | Black&Decker CD300 JIGSAW Type 3 instruction manual

®
CD300
KS531
CD300 KS531 UK p01-12
1
21-09-2000, 10:59
Congratulations!
On the purchase of your
Black & Decker jigsaw.
To ensure the best results from your jigsaw
please read these safety and usage instructions
carefully. If you have any questions or queries
after reading this manual please do not hesitate
to call your local service and information centre
(the number is towards the back of this manual).
CD300 KS531 UK p01-12
2
21-09-2000, 10:59
Contents
Page 4
Safety instructions
Double insulation
Page 5
Electrical safety
Mains plug replacement
Extension cables
Unwanted tools and the environment
The Black & Decker guarantee
Page 6
After sales service for your Black & Decker product
Our after sales service policy
Accessories
Technical data
Features
Fitting the blade
Blade support roller
Operating your jigsaw
Page 7
Saw shoe adjustment for angular cutting
Dust extraction
Handy hints
Cutting laminates
Pocket cutting
Cutting metal
Cleaning
Page 8
EC declaration of conformity
Black & Decker phone numbers and addresses
Guarantee card
CD300 KS531 UK p01-12
3
21-09-2000, 10:59
Jigsaws user manual
SAFETY INSTRUCTIONS
Warning! When using electric tools, the following
basic safety precautions should always be taken to
reduce the risk of fire, electric shock and personal
injury. Read all these instructions before attempting to
operate the product and save this booklet.
For safe operation:
• Keep the work area clean. Cluttered areas and
benches invite injuries.
• Consider the work area environment. Do not expose
the power tool to rain and do not use in damp or wet
locations. Keep the work area well lit. Do not use
the power tool where there is a risk to cause fire
or explosion.
• Guard against electric shock. Avoid body contact,
where possible, with earthed or grounded surfaces
(e.g. pipes, radiators, ranges and refrigerators).
• Keep children away. Do not let visitors touch the
tool or extension cord. All visitors should be kept
away from the work area.
• Store idle tools. When not in use, tools should be
stored in a dry, high or locked place, out of reach
of children.
• Do not force the tool. It will do the job better and
more safely at the rate for which it was intended.
• Use the right tool. Do not force small tools or
attachments to do the job of a heavy duty tool.
Do not use the tool for purposes not intended; for
example, do not use a circular saw to cut tree
limbs or logs.
• Dress properly. Do not wear loose clothing or
jewellery as they can be caught in moving parts.
Rubber gloves and non-skid footwear are
recommended when working outdoors. Wear
protective hair covering to contain long hair.
• Use safety glasses. Use a face or dust mask as well,
if the operation is dusty or if the tool is being used in
enclosed spaces.
• Connecting dust extraction equipment. If devices
are provided for the connection of dust extraction
and collection ensure these are connected and
properly used, especially in confined areas.
• Do not abuse the cord. Never carry the tool by its
cord or yank it to disconnect it from the socket. Keep
the cord away from heat, oil and sharp edges.
• Secure the work. Use clamps or a vice to hold the
work. It is safer than using a hand and it frees both
hands to operate the tool.
• Do not overreach. Keep proper footing and balance at
all times.
• Maintain the tool with care. Keep a cutting tool
sharp and clean for better and safer performance.
Follow the instructions for lubricating and changing
accessories. Inspect the tools cord periodically and,
if damaged, have repaired by an authorised service
facility. Inspect the extension cord periodically and
replace if damaged. Keep the handles dry, clean and
free from oil and grease.
• Disconnect the tool when not in use, before
servicing and when changing accessories such as
blades, bits and cutters.
• Remove adjusting keys and wrenches. Form the
habit of checking to see that keys and adjusting
wrenches are removed from the tool and replaced in
the storage area before switching on.
• Avoid unintentional starting. Do not carry a
plugged-in tool with a finger on the switch.
Ensure the switch is off when plugging in.
• Use an outdoor extension cord. When a tool is used
outdoors, only use an extension cord intended for
outdoor use and so marked.
• Stay alert. Watch what you are doing, use common
sense and do not operate the tool when tired.
• Check damaged parts. Before further use of the tool,
a guard or other part that is damaged should be
carefully checked to determine whether it will
operate properly and perform its intended function.
Check for alignment of moving parts, free running of
moving parts, breakage of parts, mounting and any
other conditions that may affect its operation. A
guard or other part that is damaged should be
properly repaired or replaced by an authorised
service centre unless otherwise indicated in the
product booklet. Have defective switches replaced
by an authorised service centre. Do not use the tool
if the switch does not turn it on and off.
• Warning! The use of any accessory or attachment,
other than recommended in the product booklet,
may present a risk of personal injury.
• Have the tool repaired by a qualified person. The
electrical tool is in accordance with the relevant
safety requirements. Repairs should only be carried
out by qualified persons using original spare parts,
otherwise, this may result in considerable danger to
the user.
Save these instructions!
DOUBLE INSULATION
The tool is double insulated. This means that all
the external metal parts are electrically insulated
4
CD300 KS531 UK p01-12
4
21-09-2000, 10:59
ENGLISH
from the mains power supply. This is done by
placing insulation barriers between the
electrical and mechanical components making
it unnecessary for the tool to be earthed.
Note: Double insulation does not take the place
of normal safety precautions when operating the
tool. The insulation system is for added protection
against injury resulting from a possible electrical
insulation failure within the tool.
ELECTRICAL SAFETY
Be sure the supply is the same as the voltage given on
the rating plate. The tool is fitted with a two-core cable
and plug.
MAINS PLUG REPLACEMENT (UK ONLY)
Should the mains plug need replacing and you are
competent to do this, proceed as instructed below.
If you are in doubt, contact a Black & Decker service
centre or a qualified electrician.
• Disconnect the plug from the power supply.
• Cut off the plug and dispose of safely. A plug with
bared copper conductors is very dangerous if
engaged in a live socket outlet.
• Only fit BS1363A approved plugs fitted with the
correctly rated fuse.
Note: Fuses do not give personal protection against
electric shock.
• The cable wire colours, or a letter, will be marked at
the connection point of most good quality plugs.
Attach the wires to their respective points in the plug
(see diagram). Brown is L (live) and blue is N (neutral).
Fit a plug
Fit a 5 amp fuse
E
approved
to BS1363A
L
N
Connect
brown to
L (live)
Connect
blue to
N (neutral)
Make sure that
the outer sheath
of the cable is held
firmly by the clamp
240 volts AC
only. Never use
a light socket
• Before replacing the top cover of the plug ensure
that the cable restraint is holding the outer sheath of
the cable firmly and that the two leads are correctly
fixed at the terminal screws. If the fuse cover is
missing or damaged do not use the plug. For
replacement or detachable fuse covers, contact a
Black & Decker service centre.
Warning! Never connect live or neutral wires to the
earth pin marked E or
.
MAINS PLUG REPLACEMENT
(AUSTRALIA AND NEW ZEALAND ONLY)
Should the mains plug or cordset of the product be
damaged, it must only be replaced by an authorised
Black & Decker service agent because special
purpose tools are required.
EXTENSION CABLES
Up to 30m (100ft) of Black & Decker 2-core extension
cable (or 3-core extension cordset, in Australia and
New Zealand) can be used without undue loss of power.
Note: An extension cable should not be used unless
absolutely necessary. Use of an improper extension
cable could result in a risk of fire and electric shock.
If an extension cable must be used, make sure it is
properly wired, contains the correct rated fuse as
recommended in its literature and is in good
electrical condition.
UNWANTED TOOLS AND THE ENVIRONMENT
Should you find one day that the tool needs
replacement or is of no further use, think of the
protection of the environment. Black & Decker
service centres will accept old tools and will
dispose of them in an environmentally safe way.
THE BLACK & DECKER GUARANTEE
(UK, AUSTRALIA AND NEW ZEALAND ONLY)
If the Black & Decker product becomes defective due
to faulty materials and workmanship, within 24 months
from the date of purchase, we guarantee to either
replace all defective parts or at our discretion, replace
the unit free of charge provided that:
• The product is returned to us or our authorised
repairers with evidence of date of purchase.
• The product has not been used for trade,
professional or hire purposes.
• The product has not been subjected to misuse
or neglect.
• The product has not sustained any damage through
foreign objects, substances or accidents.
• Repairs have not been attempted by anyone other
than our own service staff or authorised repair
distributors.
This guarantee is offered as an extra benefit and is
additional to the customers statutory rights.
5
CD300 KS531 UK p01-12
5
21-09-2000, 10:59
ENGLISH
AFTER SALES SERVICE FOR THE BLACK & DECKER
PRODUCT (UK, AUSTRALIA AND NEW ZEALAND ONLY)
Black & Decker offers a nationwide after sales service
through our company operated service centres and
concessionaries on the Channel Islands and Isle of Man.
It is our aim to offer excellent service, fast repairs,
extensive parts availability and full accessory support.
The use of other than genuine Black & Decker
accessories and parts may damage or reduce the
performance of your Black & Decker product and may
also endanger the user. The terms and conditions of
the warranty may also be effected.
THE AFTER SALES SERVICE POLICY
(UK, AUSTRALIA AND NEW ZEALAND ONLY)
It is our aim that all Black & Decker customers should
be totally satisfied with their Black & Decker product
and after sales service, but if help or advice is needed
please contact the local Black & Decker service centre
manager who will be happy to help. Full details of our
unique after sales service can be obtained from any of
our Black & Decker service centres.
ACCESSORIES
The performance of any power tool is dependant upon
the accessory used. Black & Decker accessories are
engineered to high quality standards and are designed
to enhance the performance of your tool. Buying a
Black & Decker accessory will ensure that you get the
very best from your Black & Decker tool.
TECHNICAL DATA
The level of sound pressure of the tool is in
accordance with EEC legislation. It is recommended
that you take appropriate measures for the protection
of your hearing if the sound level seems
uncomfortable. This normally equates to a sound
pressure in excess of 85dB (A).
FEATURES
1. Trigger switch
2. Lock-on button
3. Dust shroud
4. Blade support roller
5. Shoe plate
6. Dust extraction
Your jigsaw includes some or all of these features.
Note: This user manual also covers catalogue numbers
with a letter suffix. Refer to your carton for details of
your product.
•
2
1
3
4
•
•
•
•
•
6
5
FITTING THE BLADE
Manual blade change models
(only use this blade type
)
Disconnect your jigsaw from the power supply.
Slacken the two screws and
ensuring blade teeth are
facing forward, push blade
shank as far as possible into
the sawblade holder.
Slightly tighten screws
alternately to position the
blade, then fully tighten
screws. To release, turn
both screws one turn anti-clockwise.
All models
Note: To achieve a greater accuracy of cut, ensure
back of blade is touching blade support roller. See
‘Blade suport roller’ for instructions on how to change
position of blade support roller.
BLADE SUPPORT ROLLER
To provide greater support and accuracy when cutting,
your jigsaw is fitted with a blade support roller. This
support should be adjusted so that the roller touches
the back of the blade when cutting.
To do this, loosen the clamp
screw7n the side of the
tool. Push the blade support
forward until the roller
touches the back edge of
the blade. Retighten the
screw. Lubricating the guide
roller (4) from time to time
with a drop of oil will extend the life of the roller.
6
CD300 KS531 UK p01-12
6
22-09-2000, 10:39
ENGLISH
OPERATING YOUR JIGSAW
To switch your jigsaw on, fully squeeze the on/off
trigger switch (1). To switch your jigsaw off, release
the trigger switch (1). When plugging your jigsaw in,
ensure the trigger switch is in the OFF position.
When continuous operation is required, squeeze the
trigger and depress the lock on button (2) and release
the trigger. To disengage the lock, squeeze and release
the trigger. Always disengage the lock before
disconnecting from the power supply.
SAW SHOE ADJUSTMENT FOR ANGULAR CUTTING
The shoe plate (5) can be
angled up to 45˚ on either
side.
To do this, disconnect your
jigsaw from the power
supply. Raise the dust
shroud (3) and loosen both
screws on the shoe plate
with a screwdriver. Pull the
shoe plate backward a little,
and set the desired angular
adjustment according to the
scale or push the shoe plate
forward for fixed locks at 0˚,
15˚, 30˚, or 45˚. Tighten the screws to secure. Although
the scale and notches are accurate for most purposes
it is advisable for very accurate angle cutting to use a
protractor to set the shoe. Make a test cut on some
scrap material to check the accuracy of the angle. To
reset the shoe for a square cut, slacken the clamp
screws and move the shoe until it is approximately 90˚
to the blade, and then, whilst applying slight forward
pressure on the shoe, retighten the clamp screws.
DUST EXTRACTION
Your jigsaw with a hose
adapter (accessory part),
can be fitted to most
portable vacuum cleaners.
To utilise this facility push
adapter into the aperture at
the rear of jigsaw and fit vacuum hose in or over the
adapter, depending on the hose size. The dust shroud
should be in a downwards position.
HANDY HINTS
Cutting laminates
The blades of your jigsaw cut on the upstroke so any
tendency for edge splintering will occur on the face of
the material nearest the saw shoe. When sawing thin
wood or plastic laminates, use a fine tooth metal
cutting blade and cut from the back surface of the
material. To minimise the risk of chipping the edges of
plastic laminate, clamp a piece of scrap wood
or hardboard to both sides of the laminate to form a
sandwich, and saw through the complete assembly.
Always select the right blade for the job.
Pocket cutting
The saw blade can be inserted directly into a wood
surface without first drilling a pilot hole, thus
eliminating a drilling operation.
First measure and clearly mark the surface to be cut.
Then tip your jigsaw forward so that the rounded tips of
the shoe rest on the work surface but with the blade
well clear of it. Switch your jigsaw on and move the
saw down until the moving blade is exactly over the
chosen point of entry. Lower the rear of the shoe down
towards the work slowly, maintaining a firm pivoting
pressure on the shoe tips with the blade exactly on the
required line. Do not move your jigsaw forward along
the cut line until the saw blade has completely
entered the material and the shoe comes to rest flat
on its surface.
Cutting metal
Your jigsaw can be used for cutting light gauge ferrous
sheet and non-ferrous metals such as copper, brass,
aluminium, etc. It is advisable when cutting thin sheet
to clamp a backing sheet of soft wood or plywood to
the work as this will enable you to obtain a clean cut
without vibration and the possibility of tearing the
metal. Both metal and wood backing are sawn
together. Do not force the cutting blade into the metal
as this will reduce the life of the blade and possibly
damage the motor. Cutting thin metal will take longer
than cutting even a relatively thick piece of wood, so
do not be tempted to speed up the operation by
forcing the saw. Spread a thin film of oil along the
proposed cutting line before commencing to saw
metal. Always select the right blade for the job.
Cleaning
Disconnect your jigsaw from the power supply. Use
only mild soap and a slightly damp cloth to clean
your jigsaw. Many household cleaners contain
chemicals which could seriously damage the
plastic. Also, do not use petrol, turpentine, lacquer
or paint thinners or similar products. Never let any
liquid get inside the tool and never immerse any part
of your jigsaw into liquid.
7
CD300 KS531 UK p01-12
7
21-09-2000, 10:59
ENGLISH
EC DECLARATION OF CONFORMITY
We declare that unit: CD300 KS531 conforms to
89/392/EEC, 89/336/EEC, EN55014,
73/23/EEC, EN55104, EN50144, EN61000
A weighted sound pressure 96dB (A)
A weighted sound power 109dB (A)
Hand/arm weighted vibration 5m/s2
Brian Cooke - Director of Engineering
Black & Decker Ltd, Spennymoor, County Durham
DL16 6JG United Kingdom
The Black & Decker policy is one of continuous
improvement to our product and as such we reserve
the right to change the product specification without
prior notice.
8
CD300 KS531 UK p01-12
8
21-09-2000, 10:59
9
CD300 KS531 UK p01-12
9
22-09-2000, 10:38
Australia
Black & Decker (A’asia) Pty Ltd
286-288 Maroondah Highway
North Croydon, Victoria 3136
Tel: 03 9213 8200
Fax: 03 9726 7150
New Zealand
Black & Decker
483 Great South Road, Penrose, Auckland
Tel: 09 579 7600
Fax: 09 579 8200
South Africa
Black & Decker South Africa (Pty) Ltd
Suite no 107, PostNet X65, Halfway House 1685
Tel: 011 314 4431
Fax: 011 314 4435
United Kingdom
Black & Decker
210 Bath Road, Slough
Berkshire SL1 3YD
Tel: 01753 574277
Tlx: 848317 BAND MH
Fax: 01753 551155
Part no: 809614-15 10/00.9
CD300 KS531 UK p01-12
10
22-09-2000, 13:53
CD300 KS531 UK p01-12
11
21-09-2000, 11:00
Data protection act: Tick this box if you prefer not to receive
information from Black & Decker or other companies.
Product catalogue number: KS531/ _ _ _
Country:
Postcode:
County or state:
Town:
House number or name and street:
Name:
Address of the dealer where your jigsaw was purchased:
Yes
Address of the dealer where your jigsaw was purchased:
What was the price of your jigsaw?
Was your jigsaw bought as a replacement?
Was your jigsaw your first purchase?
Was your jigsaw a gift?
Date of your purchase:
No
GUARANTEE CARD
Australia: Call 1900 937766 (the maximum call charge is $2.00 excluding tax)
New Zealand: Call 0900 97766 (the maximum call charge is $2.00 excluding tax)
South Africa: Black & Decker South Africa (Pty) Ltd, Suite no 107, PostNet X65, Halfway House 1685
United Kingdom & Ireland: PO Box 821, Slough, Berkshire, SL1 3AR
22-09-2000, 13:54
12
CD300 KS531 UK p01-12
Please complete this section immediately after the purchase of your jigsaw
and post it to the Black & Decker address in your country (above).
If you live in Australia or New Zealand, please register your purchase by phone.
Part no: 809614-15 10/00.9
Download PDF

advertising