D28710 | DeWalt D28710 CHOP SAW instruction manual

D28710
Final Page size: A5 (148mm x 210mm)
English (original instructions)5
Copyright DeWALT
B
Fig. A
3
2
21
4
1
17
5
16
6
15
14
6
13
5
7
8
9
12
10
11
18
17
20
19
1
Fig. B
15
22
14
25
24
27
23
26
11
Fig. C1
Fig. C2
29
28
31
13
30
8
2
12
Fig. C3
Fig. C4
11
8
34
33
32
Fig. D
Fig. E
3
8
37
35
34
36
3
Fig. F
4
Fig. G
English
CHOPSAW
D28710
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power tool users.
Technical Data
Voltage
UK & Ireland
Type
Power input
No-load speed
Min. peripheral speed cutting disc
Disc diameter
Disc bore
Disc body thickness
Type of cutting disc
Cross-cutting capacity at 90°
circular
square
rectangular
angular
Cross-cutting capacity at 45°
circular
square
rectangular
angular
Weight
VAC
VAC
W
min-1
m/s
mm
mm
mm
D28710
230
115
1
2200
3800
80
355
25.4
3.1
straight, non-recessed
mm
mm
mm
mm
130
120 x 120
115 x 130
137 x 137
mm
mm
mm
mm
115
107 x 107
115 x 107
115 x 115
kg
17.0
WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of work patterns.
EC-Declaration of Conformity
Machinery Directive
Chopsaw
D28710
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN61029-1:2009 +A11:2010, EN61029-2-10:2010
+A11:2013.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DeWALT at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of DeWALT.
Noise values and vibration values (triax vector sum) according to EN61029:
D28710
D28710
LPA(emission sound pressure level)
LWA(sound power level)
dB(A)
dB(A)
230V
92.3
105.3
115V
92.7
105.7
K(uncertainty for the given sound
level)
dB(A)
3.0
3.0
m/s2
m/s2
3.3
1.5
1.8
1.5
Vibration emission value ah =
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN61029 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.
Markus Rompel
Director Engineering
DeWALT, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
26.03.2018
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
5
English
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
Safety Instructions
When using power tools, always observe the safety regulations
applicable in your country to reduce the risk of fire, electric shock
and personal injury.
WARNING: To reduce the risk of injury, read the
instruction manual.
General
1) Keep work area clean
ʵʵ Cluttered areas and benches can cause accidents.
2) Consider work area environment
ʵʵ Do not expose the tool to rain. Do not use the tool in damp
or wet conditions. Keep the work area well lit (250–300
Lux). Do not use the tool where there is a risk of causing
fire or explosion, e.g. in the presence of flammable liquids
and gases.
3) Keep children away
ʵʵ Do not allow children, visitors or animals to come near the
work area or to touch the tool or the mains cable.
4) Dress properly
ʵʵ Do not wear loose clothing or jewellery, as these can be
caught in moving parts. Wear protective hair covering to
keep long hair out of the way. When working outdoors,
preferably wear suitable gloves and non-slip footwear.
5) Personal protection
ʵʵ Always use safety glasses. Use a face or dust mask
whenever the operations may produce dust or flying
particles. If these particles might be considerably hot, also
wear a heat-resistant apron. Wear ear protection at all
times. Wear a safety helmet at all times.
6) Guard against electric shock
ʵʵ Prevent body contact with earthed surfaces (e.g. pipes,
radiators, cookers and refrigerators). When using the
tool under extreme conditions (e.g. high humidity, when
metal swarf is being produced, etc.), electric safety can be
improved by inserting an isolating transformer or a (FI)
earth-leakage circuit-breaker.
7) Do not overreach
ʵʵ Keep proper footing and balance at all times.
6
8) Stay alert
ʵʵ Watch what you are doing. Use common sense. Do not
operate the tool when you are tired.
9) Secure workpiece
ʵʵ Use clamps or a vice to hold the workpiece. It is safer and it
frees both hands to operate the tool.
10)Connect dust extraction equipment
ʵʵ If devices are provided for the connection of dust extraction
and collection facilities, ensure that these are connected
and properly used.
11)Remove adjusting keys and wrenches
ʵʵ Always check that adjusting keys and wrenches are
removed from the tool before operating the tool.
12)Extension cables
ʵʵ Before use, inspect the extension cable and replace
if damaged. When using the tool outdoors, only
use extension cables intended for outdoor use and
marked accordingly.
13)Use appropriate tool
ʵʵ The intended use is described in this instruction manual.
Do not force small tools or attachments to do the job of a
heavy-duty tool. The tool will do the job better and safer at
the rate for which it was intended. Do not force the tool.
WARNING: The use of any accessory or attachment or
performance of any operation with this tool other than
those recommended in this instruction manual may present
a risk of personal injury.
14)Check for damaged parts
ʵʵ Before use, carefully check the tool and mains cable for
damage. Check for misalignment and seizure of moving
parts, breakage of parts, damage to guards and switches
and any other conditions that may affect its operation.
Ensure that the tool will operate properly and perform
its intended function. Do not use the tool if any part is
damaged or defective. Do not use the tool if the switch
does not turn it on and off. Have any damaged or defective
parts replaced by an authorised DeWALT repair agent.
Never attempt any repairs yourself.
15)Unplug tool
ʵʵ Switch off and wait for the tool to come to a complete
standstill before leaving it unattended. Unplug the tool
when not in use, before changing any parts of the tools,
accessories or attachments and before servicing.
16)Avoid unintentional starting
ʵʵ Do not carry the tool with a finger on the switch. Be sure
that the tool is switched off before plugging in.
17)Do not abuse cord
ʵʵ Never carry the tool by its cord. Never pull the cord to
disconnect from the socket. Keep the cord away from heat,
oil and sharp edges.
English
18)Store idle tools
ʵʵ When not in use, tools must be stored in a dry place and locked
up securely, out of reach of children.
19)Maintain tools with care
ʵʵ Keep the tools in good condition and clean for better
and safer performance. Follow the instructions for
maintenance and changing accessories. Keep all handles
and switches dry, clean and free from oil and grease.
20)Repairs
ʵʵ This tool is in accordance with the relevant safety
regulations. Have your tool repaired by an authorised
DeWALT repair agent. Repairs should only be carried out by
qualified persons using original spare parts; otherwise this
may result in considerable danger to the user.
Additional Safety Instructions for Chopsaws
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Always wear regular working gloves while operating this tool.
Keep hands away from the cutting disc. Never cut workpieces
that require manual action closer than 15 cm from the
rotating cutting disc.
Do not cut workpieces less than 1.2 mm in thickness when
using the cutting disc supplied with this tool.
Do not operate this tool without guards in place.
Do not perform any operation freehand. Use the material
clamp to clamp the workpiece securely.
Never reach in the back of the cutting disc.
Always position the tool on a flat, stable surface that is well
maintained and free of loose materials, e.g. chips and cut-offs.
Before using, inspect the cutting disc for cracks or flaws.
Discard the cutting disc if a crack or flaw is evident or if it is
otherwise defective.
Make sure the cutting disc is not contacting the workpiece
before the tool is switched on.
In operation, avoid bouncing the cutting disc or giving it
rough treatment. If this occurs, stop the tool and inspect the
cutting disc.
Do not operate the tool while standing in line with the cutting
disc. Keep other persons away from the work area.
Be aware of cutting chips and the material being cut.
They may be sharp and hot. Allow cut off parts to cool
before handling.
The spark deflector becomes hot during use. Avoid touching or
adjusting the spark deflector immediately after operation.
Switch off the tool and wait for the cutting disc to stop before
moving the workpiece or changing the settings.
After switching off, never attempt to stop the cutting disc by
pressing against the side of the disc.
Do not use cutting fluids. These fluids could ignite or cause
electrical shock.
Check that the workpiece is properly supported.
Use the cutting discs recommended by the manufacturer only.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
The max. allowable speed of the cutting disc must always be
equal to or greater than the no-load speed of the tool specified
on the nameplate.
Do not use circular saw blades or any other toothed blades
with this tool. Serious injury may result.
Do not use cutting discs that do not conform to the
dimensions stated in the technical data.
Ensure that the abrasive cutting disc is correctly fitted and
tightened before use.
Read the operating instructions supplied by the
wheel manufacturer.
Let the tool run at no-load in a safe position for at least
30 seconds. If there is a considerable vibration or if any
other defect occurs, stop the tool and check it to determine
the cause.
Do not use cutting discs for side grinding.
Do not cut concrete, brick, tile or ceramic materials.
Do not cut wood, plastic or synthetic materials.
Do not cut cast-iron materials.
Never cut magnesium materials.
Do not cut electrically live material.
Use this tool in a well-ventilated area. Do not operate the
tool near flammable liquids, gases or dust. Sparks or hot
chips from cutting or arcing motor brushes may ignite
combustible materials.
Regularly clear the ventilation slots when working in dusty
conditions. If it should become necessary to clean the slots,
remember to unplug the tool first.
Always store cutting discs well-protected and in a dry place,
out of reach of children.
Faults in the machine, including guards or cutting discs,
should be reported as soon as they are discovered.
Only use chop saw wheel of a a max.
thickness of 3.1 mm and a max. diameter of
355 mm.
WARNING: Use of this tool can
generate dust containing chemicals
known to cause cancer, birth defects or other reproductive
harm. Use appropriate respiratory protection.
Always secure the workpiece properly before cutting operation.
Workpieces longer than 1.0 m shall be supported by suitable
additional table, buck or roller table.
Consider that the wheel continues to rotate after the machine
is switched off.
To prevent loss of control always fix the machine to a bench
using screw-clamps or bolts of sufficient length and strength.
The following factors are of influence to noise production:
ʵʵ the material to be cut.
ʵʵ the type of the cutting disc.
ʵʵ the feed force.
WARNING: Take appropriate measures for the protection
of hearing.
•
•
•
•
7
English
WARNING: We recommend the use of a residual current
device with a residual current rating of 30mA or less.
Residual Risks
•
•
•
The following risks are inherent to the use of these machines:
ʵʵ Injuries caused by touching the rotating parts.
ʵʵ Injuries caused by disruption of the cutting disc.
These risks are most evident:
ʵʵ Within the range of operation.
ʵʵ Within the range of the rotating machine parts.
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual risks
cannot be avoided. These are:
ʵʵ Impairment of hearing.
ʵʵ Risk of accidents caused by the uncovered parts of the
rotating cutting disc.
ʵʵ Risk of injury when changing the disc.
ʵʵ Risk of squeezing fingers when opening the guards.
Electrical Safety
Voltage Drops
Inrush currents cause short-time voltage drops. Under
unfavourable power supply conditions, other equipment may
be affected.
If the system impedance of the power supply is lower than 0.11
ø, disturbances are unlikely to occur.
Package Contents
The package contains:
1Chopsaw
1 Hex key
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
The electric motor has been designed for one voltage only.
Always check that the power supply corresponds to the voltage
on the rating plate.
WARNING: 115 V units have to be operated via a fail-safe
isolating transformer with an earth screen between the
primary and secondary winding.
If the supply cord is damaged, it must be replaced by a
specially prepared cord available through the DeWALT
service organisation.
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in the plug.
• Connect the blue lead to the neutral terminal.
WARNING: No connection is to be made to the
earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.
Using an Extension Cable
If an extension cable is required, use an approved 3–core
extension cable suitable for the power input of this tool (see
Technical Data).The minimum conductor size is 1.5 mm2; the
maximum length is 30 m.
When using a cable reel, always unwind the cable completely.
Connecting to the Mains
The mains supply to be used for this machine must be equipped
with a 16 A cut-out fuse with time delay.
8
Wear ear protection.
Your DeWALT tool is double insulated in accordance
with EN61029; therefore no earth wire is required.
Wear eye protection.
Bore diameter.
Date Code Position (Fig. A)
The date code 21 , which also includes the year of manufacture,
is printed into the housing.
Example:
2018 XX XX
Year of Manufacture
Description (Fig. A)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
1 On/off switch
2 Padlock hole
3 Operating handle
4 Carrying handle
5 Depth stop bolt
6 Lock nut
7 Base
8 Fence
9 Material clamp
10 Cutting table
11 8 mm hex key
12 Handle
13 Material clamp lever
English
14 Cutting disc
15 Guard
16 Spindle lock
17 Lock-down hook
18 Spark deflector
19 Spark deflector screw
20 Lock-down chain
21 Date code
Intended Use
Your D28710 chop saw has been designed for the cutting of
variously shaped steel materials.
DO NOT use under wet conditions or in the presence of
flammable liquids or gases.
The D28710 chop saw is a professional power tool.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.
Removing and Fitting a Cutting Disc
(Fig. A, B)
1. With the arm in the rest position, use the lip 22 to slide the
guard 15 back. Leave the guard retracted (Fig. B).
2. Press and hold down the spindle lock 16 (Fig. A).
3. Rotate the cutting disc 14 until it locks.
4. Using the hex key 11 , remove the bolt 23 by turning
counterclockwise and then remove the flat washer 24 and
the retaining flange 25 (Fig. B).
5. Check that the spacer 26 is in place against the flange 27 .
6. Replace the cutting disc 14 . Make sure that the
new disc is placed onto the spacer 26 in the correct
rotational direction.
7. Secure the blade with the retaining flange 25 , the flat
washer 24 and the bolt 23 .
8. Move the guard back down and release the spindle lock 16 .
9. Adjust the cutting depth as necessary.
Adjusting the Cutting Depth (Fig. A)
The cutting depth can be adjusted to meet the wear of the
cutting disc.
1. Make a dry run with the tool switched off and check
for clearance.
2. If adjustment is required, proceed as follows:
a. Loosen the lock nut 6 a few turns.
b. Turn the depth stop bolt 5 in or out as to achieve the
required cutting depth.
c. Tighten the lock nut 6 .
WARNING: Always adjust the depth stop to its original
position when replacing the cutting disc.
Clamping the Workpiece in Position
(Fig. A, C)
The tool is equipped with a material clamp 9 (Fig. A).
1. Pull the lever 13 toward the handle 12 (Fig. C1).
2. Push the clamp shaft 28 forward until the jaw 29 is almost
touching the workpiece.
3. Press the lever 13 toward the jaw 29 until it engages with
the clamp shaft 28 .
4. Rotate the handle 12 clockwise and clamp the
workpiece securely.
5. To release the workpiece, rotate the
handle 12 counterclockwise.
WARNING:
• To increase the cutting capacity, place a spacer
block 30 under the workpiece 31 . The spacer block
should be slightly narrower than the workpiece
(Fig. C2).
• Support long workpieces using a piece of wood 32 (Fig. 3C). Do not clamp the cut off end 33 .
Quick Travel Feature (Fig. C1)
The clamp has a quick travel feature.
• To release the clamp, rotate the handle 12 one or two
turns counterclockwise and pull the lever 13 toward the
handle 12 .
Setting the Clamping Position (Fig. C4)
The clamping position can be set to match the cutting disc.
1. Remove the fence bolts 34 using the hex key 11 .
2. Move the fence 8 as required.
3. Re-fit the fence bolts 34 and tighten them to lock the
fence 8 .
Adjusting the Angle of Cut (Fig. D)
The tool can be used for mitre cuts up to 45°.
1. Loosen the fence bolts 34 to release the fence 8 .
2. Set the fence 8 to the required angle. The angle can be
read on the scale 35 .
3. Tighten the fence bolts 34 to lock the fence 8 .
Checking and Adjusting the Mitre Scale
(Fig. A, D)
1. Loosen the fence bolts 34 to release the fence 8 (Fig. D).
9
English
2. Pull down the arm and lock it in this position using the lockdown chain 20 (Fig. A).
3. Place a square 36 against the fence 8 and the left side of
the cutting disc creating a perfect 90° (Fig. D). Check that
the 0° marking on the scale 35 aligns with the marking on
the table 37 .
4. Tighten the fence bolts 34 to lock the fence 8 .
5. Release the lock-down chain 20 and return the arm to its
upper rest position (Fig. A).
Adjusting the Spark Deflector (Fig. A)
1. Loosen the screw 19 .
2. Set the spark deflector 18 as appropriate.
3. Tighten the screw 19 .
Mounting (Fig. F, G)
CAUTION: Tool must be supported on stable, level,
non-skid surface to prevent unexpected movement
when operating.
Procedure For Permanent Mounting
1. Drill two holes 8 mm through the work surface (Fig. F).
2. Insert 1/4–20 screws down through the holes in the base
and through holes in mounting surface. The approximate
length of the screws should be the thickness of the
mounting surface plus 102 mm.
3. Tighten both screws securely.
Cradle Mounting
1. Cut two boards approximately 508 x 50.8 x 101.6 mm wide.
2. Place chop saw at desired work location.
3. Place boards tightly along side, and nail to work surface
(Fig. G).
Prior to Operation
• Install the appropriate cutting disc. Do not use excessively
worn discs. The maximum rotation speed of the tool must
not exceed that of the cutting disc.
• Make sure the disc rotates in the direction of the arrows on
the accessory and the tool.
• Secure the workpiece.
• Always set the spark deflector correctly.
OPERATION
Instructions for Use
WARNING:
• Always observe the safety instructions and
applicable regulations.
• Do not apply excessive pressure to the tool.
• Avoid overloading. Should the tool become hot, let it
run a few minutes under no-load condition.
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.
10
Proper Hand Position (Fig. E)
WARNING: To reduce the risk of serious personal injury,
ALWAYS use proper hand position as shown.
WARNING: To reduce the risk of serious personal
injury, ALWAYS hold securely in anticipation of a
sudden reaction.
Proper hand position requires one hand on the operating
handle 3 , with the other hand guiding the workpiece.
Performing a Cut (Fig. A)
1. Place the material to be cut against the fence 8 and secure
using the material clamp 9 .
2. Turn the tool on and pull down the operating handle 3 to cut the workpiece. Allow the motor to reach full speed
before cutting.
3. Allow the disc to cut freely. Do not force.
4. After completing the cut, switch off the tool and return the
arm to its upper rest position.
Switching On and Off (Fig. A)
The on/off switch 1 is mounted in the operating handle 3 .
• To run the tool, press the on/off switch 1 .
• Keep the on/off switch depressed while performing
the operation.
• To stop the tool, release the switch.
WARNING: Do not switch the tool on or off when
under load.
WARNING: Do not cut magnesium.
Transporting (Fig. A)
The tool is equipped with a lock-down chain 20 which locks
the tool in closed-down position for carrying.
1. Lower the guard 15 onto the cutting table 10 and secure
the tool in this position by hooking the chain 20 over the
lock-down hook 17 .
2. Transport the tool using the carrying handle 4 .
3. To release the tool, depress the operating handle 3 slightly
and release the chain.
MAINTENANCE
Your DeWALT power tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.
Lubrication
Your power tool requires no additional lubrication.
English
Cleaning
WARNING: Blow dirt and dust out of the main housing
with dry air as often as dirt is seen collecting in and around
the air vents. Wear approved eye protection and approved
dust mask when performing this procedure.
WARNING: Never use solvents or other harsh chemicals
for cleaning the non-metallic parts of the tool. These
chemicals may weaken the materials used in these parts.
Use a cloth dampened only with water and mild soap.
Never let any liquid get inside the tool; never immerse any
part of the tool into a liquid.
Optional Accessories
WARNING: Since accessories, other than those offered
by DeWALT, have not been tested with this product, use
of such accessories with this tool could be hazardous.
To reduce the risk of injury, only DeWALT recommended
accessories should be used with this product.
Consult your dealer for further information on the
appropriate accessories.
Protecting the Environment
Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
household waste.
Products and batteries contain materials that can
be recovered or recycled reducing the demand for raw
materials. Please recycle electrical products and batteries
according to local provisions. Further information is available at
www.2helpU.com.
11
Belgique et
Luxembourg België en Luxemburg
DeWALT - Belgium BVBA
Egide Walschaertsstraat 16
2800 Mechelen
Tel: NL 32 15 47 37 63
Tel: FR 32 15 47 37 64
Fax:
32 15 47 37 99
www.dewalt.be
enduser.BE@SBDinc.com
Danmark
DeWALT (Stanley Black&Decker AS)
Roskildevej 22
2620 Albertslund
Tel:
Fax:
www.dewalt.dk
kundeservice.dk@sbdinc.com
Deutschland
DeWALT
Richard Klinger Str. 11
65510 Idstein
Tel:06126-21-0
Fax:06126-21-2770
www.dewalt.de
infodwge@sbdinc.com
Ελλάς
DeWALT (Ελλάς) Α.Ε.
EΔΡΑ-ΓΡΑΦΕΙΑ : Στράβωνος 7
& Λ. Βουλιαγμένης, Γλυφάδα 166 74, Αθήνα
SERVICE : Ημερος Τόπος 2 (Χάνι Αδάμ) – 193 00 Ασπρόπυργος
Τηλ:00302108981616
Φαξ:00302108983570
www.dewalt.gr
Greece.Service@sbdinc.com
España
DeWALT Ibérica, S.C.A.
Parc de Negocios “Mas Blau”
Edificio Muntadas, c/Bergadá, 1, Of. A6
08820 El Prat de Llobregat (Barcelona)
Tel:
Fax:
934 797 400
934 797 419
www.dewalt.es
respuesta.postventa@sbdinc.com
France
DeWALT
5, allée des Hêtres
BP 60105, 69579 Limonest Cedex
Tel:
Fax:
04 72 20 39 20
04 72 20 39 00
www.dewalt.fr
scufr@sbdinc.com
Schweiz
Suisse
Svizzera
DeWALT
In der Luberzen 42
8902 Urdorf
Tel:
Fax:
044 - 755 60 70
044 - 730 70 67
www.dewalt.ch
service@rofoag.ch
Ireland
DeWALT
Building 4500, Kinsale Road
Cork Airport Business Park
Cork, Ireland
Tel:00353-2781800
Fax:
01278 1811
www.dewalt.ie
Sales.ireland@sbdinc.com
Italia
DeWALT
via Energypark 6
20871 Vimercate (MB), IT
Tel: Fax: 800-014353
39 039-9590200
39 039-9590311
www.dewalt.it
Nederlands
DeWALT
Netherlands BVPostbus 83,
6120 AB BORN
Tel:
Fax:
31 164 283 063
31 164 283 200
www.dewalt.nl
Norge
DeWALT
Postboks 4613
0405 Oslo, Norge
Tel: Fax: 45 25 13 00
45 25 08 00
www.dewalt.no
kundeservice.no@sbdinc.com
Österreich
DeWALT
Werkzeug Vertriebsges m.b.H
Oberlaaerstrasse 248, A-1230 Wien
Tel: Fax: 01 - 66116 - 0
01 - 66116 - 614
www.dewalt.at
service.austria@sbdinc.com
Portugal
DeWALT
Ed. D Dinis, Quina da Fonte
Rua dos Malhoes 2 2A 2º Esq.
Oeiras e S. Juliao da Barra, paço de Arcos e Caxias
2770 071 Paço de Arcos
Tel: Fax: +351 214667500
+351214667580
www.dewalt.pt
resposta.posvenda@sbdinc.com
Suomi
DeWALT
PL47
00521 Helsinki, Suomi
Puh: Faksi:
010 400 4333
0800 411 340
www.dewalt.fi
asiakaspalvelu.fi@sbdinc.com
Sverige
DeWALT
BOX 94
43122 Mölndal
Sverige
Tel:
Fax: 031 68 61 60
031 68 60 08
www.dewalt.se
kundservice.se@sbdinc.com
Türkiye
Sanayi ve Ticareet Bakanlığı tebliğince kullanim ömrü 7 yıldır.
Stanley Black & Decker Turkey Alet Üretim San. Tic. Ltd.Şti.
Kozyataği Mh Değirmen Sk.
Nida Kule No: 18 Kat: 6, 34742
Kadıköy, İstanbul, Türkiye
Tel: Faks:
+90 216 665 2900
+90 216 665 2901
www.dewalt.com.tr
info-tr@sbdinc.com
United
Kingdom
DeWALT, 210 Bath Road;
Slough, Berks SL1 3YD
Tel: Fax: 01753-567055
01753-572112
www.dewalt.co.uk
emeaservice@sbdinc.com
Australia
DeWALT
810 Whitehorse Road Box Hill
VIC 3103 Australia
Tel: Aust 1800 338 002
Tel: NZ 0800 339 258
www.dewalt.com.au
www.dewalt.co.nz
Middle East Africa
DeWALT
P.O. Box - 17164,
Jebel Ali Free Zone (South), Dubai, UAE
Tel: Fax: www.dewalt.ae
Service.MEA@sbdinc.com
N601269
12
70 20 15 10
70 22 49 10
971 4 812 7400
971 4 2822765
04/18
Download PDF

advertising