DCM572 | DeWalt DCM572 BLOWER VAC instruction manual

DCM572
English (original instructions)4
Copyright DeWALT
B
Figure A
2
3
4
1
5
8
7
6
9
10
Figure B
Figure C
7
7
6
Figure D
8
1
Figure E
Figure F
5
12
11
14
15
Figure G
Figure H
17
13
2
16
9
Figure I
Figure J
18
2
English
HANDHELD BLOWER
DCM572
Congratulations!
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN50636 and may be used to compare one tool
with another. It may be used for a preliminary assessment
of exposure.
WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration
emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool
is switched off or when it is running but not actually
doing the job. This may significantly reduce the
exposure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the hands
warm, organisation of work patterns.
You have chosen a DeWALT tool. Years of experience,
thorough product development and innovation make
DeWALT one of the most reliable partners for professional
power tool users.
Technical Data
Batteries & Chargers sold separately (DCM572N)
DCM572 X1, DCM572N
18/54V
18/54V
1
W
720
CFM
423
Km/Hr
207
kg
3.2
Voltage
UK & Ireland
Type
Power output
Flow Rate
Air Speed
Weight (without battery pack)
VDC
VDC
Noise values and vibration values (triax vector sum) according to
2006/42/EC, 2004/108/EC, EN 50636-2-100
L PA (emission sound pressure level)
dB(A)
88
L WA (sound power level)
dB(A)
99.5
K(uncertainty for the given sound
level)
dB(A)
1.0
Vibration emission value ah =
Uncertainty K =
m/s2
m/s2
1.9
1.5
Batteries
Chargers/Charge Times (Minutes)
Cat #
VDC
Ah
Weight
kg
DCB547
DCB546
DCB497
DCB496
DCB181
DCB182
DCB183/B
DCB184/B
DCB185
18/54
18/54
36
36
18
18
18
18
18
9.0/3.0
6.0/2.0
7.5
6.0
1.5
4.0
2.0
5.0
1.3
1.25
1.05
1.92
1.88
0.35
0.61
0.40
0.62
0.35
DCB107
DCB113
DCB115
DCB118
DCB132
DCB119
DCB413
420
270
X
X
70
185
90
240
60
220
140
X
X
35
100
50
120
30
140
90
X
X
22
60
30
75
22
85
60
X
X
22
60
30
75
22
140
90
X
X
22
60
30
75
22
X
X
X
X
45
120
60
150
X
X
X
150
120
X
X
X
X
X
3
English
EC-Declaration of Conformity
Machinery Directive
Handheld Blower
DCM572
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN 60335-1:2012+A11:2014; EN50636-2100:2014
2000/14/EC Annex V DEKRA Certification B.V., Utrechtseweg
310, 6802 ED Arnhem, The Netherlands
Notified Body ID No.: 0344
LWA (measured sound power) 99.5 dB(A)
uncertainty (K) = 1.0 dB (A)
LWA (guaranteed sound power) 101 dB(A)
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DeWALT
at the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf
of DeWALT.
Denotes risk of fire.
GENERAL APPLIANCE SAFETY WARNINGS
WARNING: When using mains-powered/cordless
appliances, basic safety precautions, including the
following, should always be followed to reduce the risk of
fire, electric shock, personal injury and material damage.
• Read all of this manual carefully before using the
appliance, be familiar with the controls and the proper use
of the appliance.
• The intended use is described in this manual. The use
of any accessory or attachment or the performance
of any operation with this appliance other than those
recommended in this instruction manual may present a
risk of personal injury.
The term "appliance" in all of the warnings listed below
refers to your mains operated (corded) appliance or battery
operated (cordless) appliance.
SAVE ALL WARNINGS AND
INSTRUCTIONS FOR FUTURE
REFERENCE.
Using your appliance
•
•
Markus Rompel
Director Engineering
DeWALT, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
16.10.2016
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in death
or serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
4
•
•
•
•
•
•
•
•
Always take care when using the appliance.
Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
Only use the appliance in daylight or good artificial light.
Do not operate your appliance in explosive atmospheres,
such as in the presence of flammable liquids, gases or dust.
Never allow children or people unfamiliar with the
instructions to use the appliance, local regulations may
restrict the age of the operator.
Do not allow children or animals to come near the work
area or touch the appliance supply cord.
Keep children, bystanders and animals away while operating
an appliance. Distractions can cause you to lose control.
The appliance is not to be used as a toy.
Do not immerse the appliance in water.
Do not open body casing. There are no userserviceable
parts inside.
Personal safety
•
•
Stay alert, watch what you are doing and use common
sense when operating an appliance. Do not use an
appliance while you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention
while operating an appliance may result in serious
personal injury.
Where required, use personal protective equipment.
Protective equipment such as eye protection, dust mask,
English
•
•
•
non-skid safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Make sure that the switch is in
the off-position before connecting to a power source and/or
battery pack, picking up or carrying the appliance. Carrying
appliances with your finger on the switch or energising
appliances that have the switch on invites accidents.
Do not overreach. Keep proper footing and balance at
all times. This enables better control of the appliance in
unexpected situations.
Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be caught
in moving parts.
After Use
•
•
•
Battery tool use and care
•
•
Appliance use and care
•
•
•
•
•
•
•
Before use, check the appliance for damaged or defective
parts. Check for breakage of parts, damage to switches
and any other conditions that may affect its operation.
Do not use the appliance if the switch does not turn it on
and off. Any appliance that cannot be controlled with the
switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or the
battery pack from the appliance before making any
adjustments, changing accessories, or storing appliances.
Such preventive safety measures reduce the risk of starting
the appliance accidentally.
Where applicable, keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
Do not use the appliance if any part is damaged or defective.
Have any damaged or defective parts repaired or replaced
by an authorised repair agent.
Never attempt to remove or replace any parts other than
those specified in this manual.
Electrical safety
•
•
•
•
•
Appliance plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) appliance. Unmodified plugs and
matching outlets will reduce risk of electric shock.
Do not expose appliance to rain or wet conditions. Water
entering a appliance will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the appliance. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
When operating an appliance outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
If operating an appliance in a damp location is
unavoidable, use a Residual Current Device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
When not in use, the appliance should be stored in a dry,
well ventilated place out of the reach of children.
Children should not have access to stored appliances.
When the appliance is stored or transported in a vehicle
it should be placed in the boot or restrained to prevent
movement following sudden changes in speed or direction.
•
•
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
Use power tools only with specifically designated battery
packs. Use of any other battery packs may create a risk of
injury and fire.
When battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails, screws or
other small metal objects, that can make a connection
from one terminal to another. Shorting the battery
terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause
irritation or burns.
Service
•
Have your appliance serviced by a qualified repair person
using only identical replacement parts. This will ensure
that the safety of the appliance is maintained.
Additional Safety Instructions for
Blowers
The intended use is described in this manual. The use of any
accessory or attachment or performance of any operation
with this appliance other than those recommended in this
instruction manual can present a risk of personal injury and/
or damage to property.
• To protect your feet and legs while operating the appliance,
always wear heavy duty footwear and long trousers.
• Always switch off your product, allow the fan to stop and
remove the plug from the socket when:
ʵʵ The supply cable has become damaged or entangled.
ʵʵ You leave your product unattended.
ʵʵ Checking, adjusting, cleaning or working on your product.
ʵʵ If the appliance starts to vibrate abnormally.
• Do not place the inlet or outlet of the sweeper near eyes or ears
when operating. Never blow debris in the direction of bystanders.
• Do not use in the rain or leave outdoors while it is raining.
• Do not cross gravel paths or roads whilst your product is
switched on during blow mode. Walk, never run.
5
English
•
•
•
Do not place your unit down on gravel while it is switched on.
Always be sure of your footing, particularly on slopes. Do
not overreach and keep your balance at all times.
Do not place any objects into the openings. Never use if
the openings are blocked - keep free of hair, lint, dust and
anything that may reduce the airflow.
WARNING: Always use your product in the manner
outlined in this manual. Your product is designed to be
used in an upright mode and if it is used in any other way
it may result in injury. Never run your product whilst lying
on it’s side or upside down.
The operator or user is responsible for accidents or hazards
occurring to other people or their property.
Do not carry the appliance by the cable.
Always direct the cable to the rear away from the appliance.
WARNING: If a cord becomes damaged during use,
disconnect the supply cord from the mains supply
immediately. Do not touch the supply cord before
disconnecting the supply.
Do not use solvents or cleaning fluids to clean your
product. Use a blunt scraper to remove grass and dirt.
Replacement fans are available from a DeWALT service agent.
Use on DeWALT recommended spare parts and accessories.
Keep all nuts bolts and screws tight to make sure that the
appliance is in a safe working condition.
•
•
•
•
•
•
Electrical Safety
The electric motor has been designed for one voltage only.
Always check that the battery pack voltage corresponds
to the voltage on the rating plate. Also make sure that the
voltage of your charger corresponds to that of your mains.
Your DeWALT charger is double insulated in
accordance with EN60335; therefore no earth wire
is required.
WARNING: 115 V units have to be operated via a
fail-safe isolating transformer with an earth screen
between the primary and secondary winding.
If the supply cord is damaged, it must be replaced by a
specially prepared cord available through the DeWALT
service organisation.
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in the plug.
• Connect the blue lead to the neutral terminal.
WARNING: No connection is to be made to the
earth terminal.
Follow the fitting instructions supplied with good quality
plugs. Recommended fuse: 3 A.
SAFETY OF OTHERS
Using an Extension Cable
The appliance is only to be used with the power
supply unit provided with the appliance
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not
play with the appliance.
An extension cord should not be used unless absolutely
necessary. Use an approved extension cable suitable for
the power input of your charger (see Technical Data). The
minimum conductor size is 1 mm2; the maximum length
is 30 m.
When using a cable reel, always unwind the
cable completely.
Residual Risks
Additional residual risks may arise when using the tool
which may not be included in the enclosed safety warnings.
These risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include:
• Injuries caused by touching any rotating/moving parts.
• Injuries caused when changing any parts, blades or
accessories.
• Injuries caused by prolonged use of a tool. When using any
tool for prolonged periods ensure you take regular breaks.
• Impairment of hearing.
• Health hazards caused by breathing dust developed when
using your tool (example: working with wood, especially
oak, beech and MDF.)
6
SAVE THESE INSTRUCTIONS
Chargers
DeWALT chargers require no adjustment and are designed
to be as easy as possible to operate.
Important Safety Instructions for All
Battery Chargers
SAVE THESE INSTRUCTIONS: This manual contains
important safety and operating instructions for compatible
battery chargers (refer to Technical Data).
• Before using charger, read all instructions and cautionary
markings on charger, battery pack, and product using
battery pack.
WARNING: Shock hazard. Do not allow any liquid to
get inside charger. Electric shock may result.
WARNING: We recommend the use of a residual
current device with a residual current rating of 30mA
or less.
English
•
•
•
•
•
•
•
•
•
•
•
CAUTION: Burn hazard. To reduce the risk of injury,
charge only DeWALT rechargeable batteries. Other
types of batteries may burst causing personal injury
and damage.
CAUTION: Children should be supervised to ensure
that they do not play with the appliance.
NOTICE: Under certain conditions, with the charger
plugged into the power supply, the exposed charging
contacts inside the charger can be shorted by foreign
material. Foreign materials of a conductive nature
such as, but not limited to, steel wool, aluminum foil or
any buildup of metallic particles should be kept away
from charger cavities. Always unplug the charger from
the power supply when there is no battery pack in the
cavity. Unplug charger before attempting to clean
DO NOT attempt to charge the battery pack with
any chargers other than the ones in this manual.
The charger and battery pack are specifically designed to
work together.
These chargers are not intended for any uses other
than charging DeWALT rechargeable batteries.
Any other uses may result in risk of fire, electric shock
or electrocution.
Do not expose charger to rain or snow.
Pull by plug rather than cord when disconnecting
charger. This will reduce risk of damage to electric plug
and cord.
Make sure that cord is located so that it will not be
stepped on, tripped over, or otherwise subjected to
damage or stress.
Do not use an extension cord unless it is absolutely
necessary. Use of improper extension cord could result in
risk of fire,electric shock, or electrocution.
Do not place any object on top of charger or place
the charger on a soft surface that might block the
ventilation slots and result in excessive internal heat.
Place the charger in a position away from any heat source.
The charger is ventilated through slots in the top and the
bottom of the housing.
Do not operate charger with damaged cord or
plug—have them replaced immediately.
Do not operate charger if it has received a sharp
blow, been dropped, or otherwise damaged in any
way. Take it to an authorised service centre.
Do not disassemble charger; take it to an authorised
service centre when service or repair is required.
Incorrect reassembly may result in a risk of electric shock,
electrocution or fire.
In case of damaged power supply cord the supply cord
must be replaced immediately by the manufacturer,
its service agent or similar qualified person to prevent
any hazard.
•
•
•
Disconnect the charger from the outlet before
attempting any cleaning. This will reduce the risk of
electric shock. Removing the battery pack will not reduce
this risk.
NEVER attempt to connect two chargers together.
The charger is designed to operate on standard
230V household electrical power. Do not attempt to
use it on any other voltage. This does not apply to the
vehicular charger.
Charging a Battery (Fig. B)
1. Plug the charger into an appropriate outlet before
inserting battery pack.
2. Insert the battery pack 7 into the charger, making sure
the battery pack is fully seated in the charger. The red
(charging) light will blink repeatedly indicating that the
charging process has started.
3. The completion of charge will be indicated by the red
light remaining ON continuously. The battery pack is
fully charged and may be used at this time or left in the
charger. To remove the battery pack from the charger,
push the battery release button 8 on the battery pack.
NOTE: To ensure maximum performance and life of lithiumion battery packs, charge the battery pack fully before first use.
Charger Operation
Refer to the indicators below for the charge status of the
battery pack.
Charge Indicators
Charging
Fully Charged
Hot/Cold Pack Delay*
*The red light will continue to blink, but a yellow indicator
light will be illuminated during this operation. Once the
battery pack has reached an appropriate temperature, the
yellow light will turn off and the charger will resume the
charging procedure.
The compatible charger(s) will not charge a faulty battery
pack. The charger will indicate faulty battery by refusing to
light or by displaying problem pack or charger blink pattern.
NOTE: This could also mean a problem with a charger.
If the charger indicates a problem, take the charger and
battery pack to be tested at an authorised service centre.
Hot/Cold Pack Delay
When the charger detects a battery pack that is too hot
or too cold, it automatically starts a Hot/Cold Pack Delay,
suspending charging until the battery pack has reached an
appropriate temperature. The charger then automatically
switches to the pack charging mode. This feature ensures
maximum battery pack life.
7
English
A cold battery pack will charge at a slower rate than a warm
battery pack. The battery pack will charge at that slower rate
throughout the entire charging cycle and will not return to
maximum charge rate even if the battery pack warms.
The DCB118 charger is equipped with an internal fan
designed to cool the battery pack. The fan will turn on
automatically when the battery pack needs to be cooled.
Never operate the charger if the fan does not operate
properly or if ventilation slots are blocked. Do not permit
foreign objects to enter the interior of the charger.
Electronic Protection System
XR Li-Ion tools are designed with an Electronic Protection
System that will protect the battery pack against
overloading, overheating or deep discharge.
The tool will automatically turn off if the Electronic
Protection System engages. If this occurs, place the lithiumion battery pack on the charger until it is fully charged.
Wall Mounting
These chargers are designed to be wall mountable or to sit
upright on a table or work surface. If wall mounting, locate
the charger within reach of an electrical outlet, and away
from a corner or other obstructions which may impede
air flow. Use the back of the charger as a template for the
location of the mounting screws on the wall. Mount the
charger securely using drywall screws (purchased separately)
at least 25.4 mm long with a screw head diameter of
7–9 mm, screwed into wood to an optimal depth leaving
approximately 5.5 mm of the screw exposed. Align the slots
on the back of the charger with the exposed screws and fully
engage them in the slots.
Charger Cleaning Instructions
WARNING: Shock hazard. Disconnect the charger
from the AC outlet before cleaning. Dirt and grease
may be removed from the exterior of the charger using
a cloth or soft non-metallic brush. Do not use water or
any cleaning solutions. Never let any liquid get inside
the tool; never immerse any part of the tool into a
liquid.
Battery Packs
Important Safety Instructions for All
Battery Packs
When ordering replacement battery packs, be sure to
include catalog number and voltage.
The battery pack is not fully charged out of the carton.
Before using the battery pack and charger, read the safety
instructions below. Then follow charging procedures
outlined.
READ ALL INSTRUCTIONS
•
8
Do not charge or use battery in explosive
atmospheres, such as in the presence of flammable
•
•
•
•
•
•
•
liquids, gases or dust. Inserting or removing the battery
from the charger may ignite the dust or fumes.
Never force battery pack into charger. Do not modify
battery pack in any way to fit into a non-compatible
charger as battery pack may rupture causing serious
personal injury.
Charge the battery packs only in DeWALT chargers.
DO NOT splash or immerse in water or other liquids.
Do not store or use the tool and battery pack in
locations where the temperature may reach or
exceed 40 ˚C (104 ˚F) (such as outside sheds or metal
buildings in summer).
Do not incinerate the battery pack even if it is
severely damaged or is completely worn out. The
battery pack can explode in a fire. Toxic fumes and
materials are created when lithium-ion battery packs are
burned.
If battery contents come into contact with the skin,
immediately wash area with mild soap and water. If
battery liquid gets into the eye, rinse water over the open
eye for 15 minutes or until irritation ceases. If medical
attention is needed, the battery electrolyte is composed of
a mixture of liquid organic carbonates and lithium salts.
Contents of opened battery cells may cause
respiratory irritation. Provide fresh air. If symptoms
persists, seek medical attention.
WARNING: Burn hazard. Battery liquid may be
flammable if exposed to spark or flame.
WARNING: Never attempt to open the battery pack
for any reason. If battery pack case is cracked or
damaged, do not insert into charger. Do not crush,
drop or damage battery pack. Do not use a battery
pack or charger that has received a sharp blow, been
dropped, run over or damaged in any way (i.e., pierced
with a nail, hit with a hammer, stepped on). Electric
shock or electrocution may result. Damaged battery
packs should be returned to service centre for recycling.
WARNING: Fire hazard. Do not store or carry the
battery pack so that metal objects can contact
exposed battery terminals. For example, do not
place the battery pack in aprons, pockets, tool boxes,
product kit boxes, drawers, etc., with loose nails,
screws, keys, etc.
CAUTION: When not in use, place tool on its side
on a stable surface where it will not cause a
tripping or falling hazard. Some tools with large
battery packs will stand upright on the battery pack
but may be easily knocked over.
Transportation
WARNING: Fire hazard. Transporting batteries can
possibly cause fire if the battery terminals inadvertently
come in contact with conductive materials. When
transporting batteries, make sure that the battery
English
terminals are protected and well insulated from materials
that could contact them and cause a short circuit.
DeWALT batteries comply with all applicable shipping
regulations as prescribed by industry and legal standards
which include UN Recommendations on the Transport of
Dangerous Goods; International Air Transport Association
(IATA) Dangerous Goods Regulations, International Maritime
Dangerous Goods (IMDG) Regulations, and the European
Agreement Concerning The International Carriage of
Dangerous Goods by Road (ADR). Lithium-ion cells and
batteries have been tested to section 38.3 of the UN
Recommendations on the Transport of Dangerous Goods
Manual of Tests and Criteria.
In most instances, shipping a DeWALT battery pack will be
excepted from being classified as a fully regulated Class 9
Hazardous Material. In general, only shipments containing
a lithium-ion battery with an energy rating greater than
100 Watt Hours (Wh) will require being shipped as fully
regulated Class 9. All lithium-ion batteries have the Watt
Hour rating marked on the pack. Furthermore, due to
regulation complexities, DeWALT does not recommend air
shipping lithium-ion battery packs alone regardless of Watt
Hour rating. Shipments of tools with batteries (combo kits)
can be air shipped as excepted if the Watt Hour rating of the
battery pack is no greater than 100 Whr.
Regardless of whether a shipment is considered excepted
or fully regulated, it is the shipper's responsibility to consult
the latest regulations for packaging, labeling/marking and
documentation requirements.
The information provided in this section of the manual is
provided in good faith and believed to be accurate at the
time the document was created. However, no warranty,
expressed or implied, is given. It is the buyer’s responsibility
to ensure that its activities comply with the applicable
regulations.
Transporting the FLEXVOLTTM Battery
The DeWALT FLEXVOLTTM battery has two modes: Use and
Transport.
Use Mode: When the FLEXVOLTTM battery stands alone or is
in a DeWALT 18V product, it will operate as an 18V battery.
When the FLEXVOLTTM battery is in a 54V or a 108V (two 54V
batteries) product, it will operate as a 54V battery.
Transport Mode: When the cap is attached to the
FLEXVOLTTM battery, the battery is in Transport mode. Keep
the cap for shipping.
When in Transport mode,
strings of cells are electrically
disconnected within the
pack resulting in 3 batteries
with a lower Watt hour (Wh) rating as compared to 1 battery
with a higher Watt hour rating. This increased quantity of 3
batteries with the lower Watt hour rating can exempt the
pack from certain shipping regulations that are imposed
upon the higher Watt hour batteries.
For example, the
Example of Use and Transport Label Marking
Transport Wh rating
might indicate 3 x 36
Wh, meaning 3
batteries of 36 Wh each.
The Use Wh rating might indicate 108 Wh (1 battery implied).
Storage Recommendations
1. The best storage place is one that is cool and dry
away from direct sunlight and excess heat or cold. For
optimum battery performance and life, store battery
packs at room temperature when not in use.
2. For long storage, it is recommended to store a fully
charged battery pack in a cool, dry place out of the
charger for optimal results.
NOTE: Battery packs should not be stored completely
depleted of charge. The battery pack will need to be
recharged before use.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the labels
on the charger and the battery pack may show the following
pictographs:
Read instruction manual before use.
See Technical Data for charging time.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Do not expose to water.
Have defective cords replaced immediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care for the
environment.
9
English
Charge DeWALT battery packs only with
designated DeWALT chargers. Charging
battery packs other than the designated
DeWALT batteries with a DeWALT charger may
make them burst or lead to other dangerous
situations.
Do not incinerate the battery pack.
Keep bystanders away.
Directive 2000/14/EC guaranteed sound
power.
101
101
Date Code Position (Fig. J)
The DCM572 operates on a 54 volt battery pack.
These battery packs may be used: DCB546, DCB547. Refer to
Technical Data for more information.
The date code 18 which also includes the year of
manufacture, is printed into the housing.
Example:
2016 XX XX
Year of Manufacture
Package Contents
Description (Fig. A)
The package contains:
1 Blower motor housing
1 Blower tube
1 Large end nozzle
1 Wide end nozzle
1 Battery (Only included with DCM572X1)
1 Charger (Only included with DCM572X1)
1 Instruction manual
• Check for damage to the tool, parts or accessories which
may have occurred during transport.
• Take the time to thoroughly read and understand this
manual prior to operation.
WARNING: Never modify the power tool or any part of
it. Damage or personal injury could result.
1 Trigger switch
2 Speed lock lever
3 Lock-off switch
4 Handle
5 Tube
6 Battery housing
7 Battery pack (Only included with DCM572 X1)
8 Battery release button
9 Large end nozzle
10 Wide end nozzle
Battery Type
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Do not expose the tool to rain or high
humidity or leave outdoors while it is
raining.
Switch the tool off. Before performing
any maintenance on the tool, remove the
battery from the tool.
Keep people and animals at least 6 m
away from the work area.
10
Intended Use
Your blower has been designed for professional sweeping
and blowing applications.
DO NOT use under wet conditions or in the presence of
flammable liquids or gases.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons
(including children) suffering from diminished
physical, sensory or mental abilities; lack of experience,
knowledge or skills unless they are supervised by a
person responsible for their safety. Children should never
be left alone with this product.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An
accidental start-up can cause injury.
WARNING: Use only DeWALT battery packs
and chargers.
Inserting and Removing the Battery Pack
from the Tool (Fig. C - E)
NOTE: Make sure your battery pack 7 is fully charged.
To Install the Battery Pack into the Tool
1. Align the battery pack 7 with the rails inside the tool
(Fig. C).
2. Slide it in until the battery pack is firmly seated in the
tool and ensure that you hear the lock snap into place.
To Remove the Battery Pack from the
Tool
1. Press the release button 8 and firmly pull the battery
pack out of the tool handle.
2. Insert battery pack into the charger as described in the
charger section of this manual.
Fuel Gauge Battery Packs (Fig. E)
Some DeWALT battery packs include a fuel gauge which
consists of three green LED lights that indicate the level of
charge remaining in the battery pack.
To actuate the fuel gauge, press and hold the fuel gauge
button 11 . A combination of the three green LED lights will
illuminate designating the level of charge left. When the
level of charge in the battery is below the usable limit, the
fuel gauge will not illuminate and the battery will need to
be recharged.
NOTE: The fuel gauge is only an indication of the charge left
on the battery pack. It does not indicate tool functionality
and is subject to variation based on product components,
temperature and end-user application.
Assembly (Fig. F)
CAUTION: Ensure the lock-off switch is in the locked
position to prevent the trigger switch from moving and
the battery is removed before attaching or removing
the tube 5 . The tube must be attached to the housing
12 before use.
• TUBE ASSEMBLY: To attach the tube to the blower,
line up the pegs 13 on the bottom of the tube with
the notch 14 on the bottom of the housing opening as
shown in figure F. Push the tube into the blower housing
until the lock engages the tube.
• Pull on the tube to ensure it is securely in place.
• To remove the tube, insert a screwdriver into the
unlocking hole 15 on the side of the housing. Lift the
tab inside and pull tube out.
Attaching Nozzles (Fig. A, G)
English
2. Slide the nozzle onto the tube.
3. Firmly twist the nozzle to lock the nubs completely into the
recess of the nozzle. Ensure the nozzle is securely attached.
OPERATION
Instructions for Use
WARNING: Always observe the safety instructions and
applicable regulations.
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An
accidental start-up can cause injury.
Proper Hand Position (Fig. A, I)
WARNING: To reduce the risk of serious personal
injury, ALWAYS use proper hand position as shown.
WARNING: To reduce the risk of serious personal
injury, ALWAYS hold securely in anticipation of a
sudden reaction.
Hold the handle 4 with one hand. as shown in figure I
Switching On (Fig. A, H, I)
CAUTION: Do not point unit discharge at self or
bystanders.
CAUTION: Always wear safety glasses. Wear a filter
mask if the operation is dusty. Use of gloves, long
pants and substantial footwear is recommended. Keep
long hair and loose clothing away from openings and
moving parts.
To lock the blower on, pull back on the speed lock lever 2 ,
as shown in figure H. The blower runs at higher speeds as
the lever is moved further. The speed lock lever can also
be pulled back to start the blower without needing to first
depress the trigger switch.
• Hold the sweeper with one hand as shown in figure I
and sweep from side to side with the tube 5 several
inches above the hard surface. Slowly advance keeping
the accumulated pile of debris in front of you.
MAINTENANCE
Your DeWALT power tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An
accidental start-up can cause injury.
The charger and battery pack are not serviceable.
1. Line up the channels 16 of the desired nozzle 9 or 10 with the nubs 17 on the tube 5 .
11
English
Lubrication
Your power tool requires no additional lubrication.
Cleaning
WARNING: Blow dirt and dust out of the main
housing with dry air as often as dirt is seen collecting
in and around the air vents. Wear approved eye
protection and approved dust mask when performing
this procedure.
WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of the
tool. These chemicals may weaken the materials used
in these parts. Use a cloth dampened only with water
and mild soap. Never let any liquid get inside the tool;
never immerse any part of the tool into a liquid.
Optional Accessories
WARNING: Since accessories, other than those
offered by DeWALT, have not been tested with this
product, use of such accessories with this tool could be
hazardous. To reduce the risk of injury, only DeWALT
recommended accessories should be used with
this product.
Consult your dealer for further information on the
appropriate accessories.
Protecting the Environment
Separate collection. Products and batteries marked
with this symbol must not be disposed of with
normal household waste.
Products and batteries contain materials that can
be recovered or recycled reducing the demand for raw
materials. Please recycle electrical products and batteries
according to local provisions. Further information is available
at www.2helpU.com.
Rechargeable Battery Pack
This long life battery pack must be recharged when it fails
to produce sufficient power on jobs which were easily done
before. At the end of its technical life, discard it with due care
for our environment:
• Run the battery pack down completely, then remove it
from the tool.
• Li-Ion cells are recyclable. Take them to your dealer or a
local recycling station. The collected battery packs will
be recycled or disposed of properly
12
13
Belgique et
Luxembourg België
en Luxemburg
DeWALT - Belgium BVBA
Egide Walschaertsstraat 16
2800 Mechelen
Tel: NL 32 15 47 37 63
Tel: FR 32 15 47 37 64
Fax: 32 15 47 37 99
www.dewalt.be
enduser.BE@SBDinc.com
Danmark
DeWALT
Roskildevej 22
2620 Albertslund
Tel: 70 20 15 10
Fax: 70 22 49 10
www.dewalt.dk
kundeservice.dk@sbdinc.com
Deutschland
DeWALT
Richard Klinger Str. 11
65510 Idstein
Tel:06126-21-1
Fax:06126-21-2770
www.dewalt.de
infodwge@sbdinc.com
Ελλάς
DeWALT (Ελλάς) Α.Ε.
Τηλ: 00302108981616
EΔΡΑ-ΓΡΑΦΕΙΑ : Στράβωνος 7
Φαξ: 00302108983570
& Λ. Βουλιαγμένης, Γλυφάδα 166 74, Αθήνα
SERVICE : Ημερος Τόπος 2 (Χάνι Αδάμ) –
193 00 Ασπρόπυργος
www.dewalt.gr
Greece.Service@sbdinc.com
España
DeWALT Ibérica, S.C.A.
Parc de Negocios “Mas Blau”
Edificio Muntadas, c/Bergadá, 1, Of. A6
08820 El Prat de Llobregat (Barcelona)
Tel: 934 797 400
Fax: 934 797 419
www.dewalt.es
respuesta.postventa@sbdinc.
com
France
DeWALT
5, allée des Hêtres
BP 30084, 69579 Limonest Cedex
Tel: 04 72 20 39 20
Fax: 04 72 20 39 00
www.dewalt.fr
scufr@sbdinc.com
Schweiz
Suisse
Svizzera
DeWALT
In der Luberzen 42
8902 Urdorf
Tel: 044 - 755 60 70
Fax: 044 - 730 70 67
www.dewalt.ch
service@rofoag.ch
Ireland
DeWALT
Calpe House Rock Hill
Black Rock, Co. Dublin
Tel:00353-2781800
Fax:00353-2781811
www.dewalt.ie
Italia
DeWALT
via Energypark
20871 Vimercate (MB), IT
Tel: 800-014353
39 039 9590200
Fax: 39 039 9590313
www.dewalt.it
Nederlands
Tel: 31 164 283 063
DeWALT Netherlands BV
Holtum Noordweg 35
Fax: 31 164 283 200
6121 RE BORN, Postbus 83, 6120 AB BORN
www.dewalt.nl
Norge
DeWALT
Postboks 4613, Nydalen
0405 Oslo
Tel: 45 25 13 00
Fax: 45 25 08 00
www.dewalt.no
kundeservice.no@sbdinc.com
Österreich
DeWALT
Werkzeug Vertriebsges m.b.H
Oberlaaerstrasse 248, A-1230 Wien
Tel: 01 - 66116 - 0
Fax: 01 - 66116 - 614
www.dewalt.at
service.austria@sbdinc.com
Portugal
Tel: 214 66 75 00
DeWALT Limited, SARL
Centro de Escritórios de Sintra Avenida
Fax: 214 66 75 80
Almirante Gago Coutinho, 132/134, Edifício 14
2710-418 Sintra
www.dewalt.pt
resposta.posvenda@sbdinc.com
Suomi
DeWALT
PL 47
00521 Helsinki
Puh: 010 400 4333
Faksi:0800 411 340
www.dewalt.fi
asiakaspalvelu.fi@sbdinc.com
Sverige
DeWALT
Box 94
431 22 Mölndal
Tel: 031 68 61 60
Fax: 031 68 60 08
www.dewalt.se
kundservice.se@sbdinc.com
Türkiye
KALE Hırdavat ve Makina A.Ş.
Defterdar Mah. Savaklar Cad. No:15
Edirnekapı / Eyüp / İSTANBUL 34050
TÜRKİYE
Tel: 0212 533 52 55
Faks: 0212 533 10 05
www.dewalt.com.tr
United
Kingdom
DeWALT, 210 Bath Road;
Slough, Berks SL1 3YD
Tel: 01753-567055
Fax: 01753-572112
www.dewalt.co.uk
emeaservice@sbdinc.com
Australia
DeWALT
82 Taryn Drive, Epping
VIC 3076 Australia
Tel: Aust 1800 338 002
Tel: NZ 0800 339 258
www.dewalt.com.au
www.dewalt.co.nz
Middle East Africa
DeWALT
P.O. Box - 17164,
Jebel Ali Free Zone (South), Dubai, UAE
Tel: 971 4 812 7400
Fax: 971 4 2822765
www.dewalt.ae
Service.MEA@sbdinc.com
14
N50128411/16
Download PDF

advertising