LG | BP736 | LG BP736 Owner’s Manual

OWNER’S MANUAL
Network 3D
Blu-ray Disc™ /
DVD Player
Please read this manual carefully before operating
your set and retain it for future reference.
BP736
P/NO : MFL69489211_1.0
www.lg.com
2
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing) instructions
in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: No naked flame sources, such as lighted
candles, should be placed on the apparatus.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a
dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact
replacement part by an authorized service center.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the appliance. To disconnect power from the mains,
pull out the mains cord plug. When installing the
product, ensure that the plug is easily accessible.
Getting Started
3
This device is equipped with a portable battery or
accumulator.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, should be placed on the
apparatus.
yy The appliance is not intended for use by young
children or infirm persons without supervision.
yy Young Children should be supervised to ensure
that they do not play with appliance.
yy If the appliance is supplied from a cord
extension set or an electrical portable outlet
device, the cord extension set on electrical
portable outlet device must be positioned so
that it is not subject to splashing or ingress of
moisture.
1
Getting Started
Safety way to remove the battery or the battery
from the equipment: Remove the old battery or
battery pack, follow the steps in reverse order than
the assembly. To prevent contamination of the
environment and bring on possible threat to human
and animal health, the old battery or the battery
put it in the appropriate container at designated
collection points. Do not dispose of batteries or
battery together with other waste. It is recommended
that you use local, free reimbursement systems
batteries and accumulators. The battery shall not be
exposed to excessive heat such as sunshine, fire or
the like.
4
1
Getting Started
Getting Started
Notes on Copyrights
Important Notice for TV color system
yy Because AACS (Advanced Access Content System)
is approved as content protection system for Bluray Disc format, similar to use of CSS (Content
Scramble System) for DVD format, certain
restrictions are imposed on playback, analog
signal output, etc., of AACS protected contents.
The operation of this product and restrictions on
this product may vary depending on your time of
purchase as those restrictions may be adopted
and/or changed by AACS after the production of
this product.
The color system of this player differs according to
currently playing discs.
yy Furthermore, BD-ROM Mark and BD+ are
additionally used as content protection systems
for Blu-ray Disc format, which imposes certain
restrictions including playback restrictions for
BD-ROM Mark and/or BD+ protected contents.
To obtain additional information on AACS, BDROM Mark, BD+, or this product, please contact an
authorized Customer Service Center.
yy The multi system color TV changes the color
system automatically according to input signals.
In case that the color system is not changed
automatically, turn it off and then on to see normal
images on screen.
yy Many BD-ROM/DVD discs are encoded with
copy protection. Because of this, you should only
connect your player directly to your TV, not to a
VCR. Connecting to a VCR results in a distorted
picture from copy-protected discs.
yy This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi Corporation, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Rovi Corporation. Reverse
engineering or disassembly is prohibited.
yy Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs
and other materials may subject you to civil and/or
criminal liability.
For example, when the player plays the disc recorded
in the NTSC color system, the image is output as an
NTSC signal.
Only the multi system color TV can receive all signals
output from the player.
yy If you have a PAL color system TV, you will see
just distorted images when using discs or video
contents recorded in NTSC.
yy Even if the disc recorded in NTSC color system
are well displayed on your TV, these may not be
recorded correctly on your recorder.
Getting Started
5
>>Caution
yy Watching a 3D content for a long period time
may cause dizziness or tiredness.
yy If you are experiencing headache, tiredness
or dizziness while viewing contents in 3D, it is
strongly recommended to stop the playback
and rest until you feel normal.
Symbols
~
Refers to alternating current(AC).
0
Refers to direct current(DC).
Refers to class II equipment.
1
Refers to stand-by.
!
Refers to “ON” (power).
Refers to dangerous voltage.
1
Getting Started
yy It is not recommended to watch a movie
in 3D mode for infirm, child and pregnant
woman.
6
Table of Contents
Table of Contents
1
Getting Started
2
Safety Information
8Introduction
8
– Playable Discs and symbols used in this
manual
9
– About the “7” Symbol Display
9
– Regional Code
9
– System Select
10 Remote Control
11 Front Panel
11 Rear Panel
2Connecting
12
13
13
14
14
16
16
17
18
18
Connecting to Your TV
– What is SIMPLINK?
– Resolution Setting
Connecting to an Amplifier
– Connecting to an Amplifier via HDMI
Output
– Connecting to an Amplifier via Digital
Audio Output
Connecting to your Home Network
– Wired network connection
– Wired Network Setup
– Wireless network connection
– Wireless network setup
3
System Setting
15
21 Initial Setup
22Settings
22 – Adjust the Setup Settings
22 – [NETWORK] Menu
24 – [DISPLAY] Menu
26 – [LANGUAGE] Menu
26 – [AUDIO] Menu
28 – [LOCK] Menu
29 – [OTHERS] Menu
4Operating
31
31
31
32
32
32
33
34
35
36
36
36
36
37
37
38
38
38
38
39
39
40
40
41
42
42
42
42
43
43
43
43
44
44
45
45
46
46
47
48
48
49
49
50
Home Menu Display
– Using [HOME] menu
– Using the SmartShare
Playing the Linked Devices
– Playing a Disc
– Playing Blu-ray 3D disc
– Playing a file on disc/USB device
– Playing a file on Android device
– Playing a file on a network server
Using Home Network Server for PC
– About SmartShare PC Software
– Downloading SmartShare PC Software
– Installing SmartShare PC Software
– Sharing files and folders
– System requirements
General Playback
– Basic operations for video and audio
content
– Basic operations for photo content
– Using the disc menu
– Resume playback
– Last Scene Memory
On-Screen Display
– To control video playback
– To control photo view
Advanced Playback
– Repeat playback
– Repeating a specific portion
– Playing from selected time
– Selecting a subtitle language
– Hearing a different audio
– Watching from a different angle
– Changing the TV Aspect Ratio
– Changing subtitle Code Page
– Changing the Picture Mode
– Viewing content information
– Changing content list view
– Selecting a subtitle file
– Listening to music during slide show
– Playing content to 3D
Advanced Features
– Wi-Fi Direct™
– Enjoying Miracast™
– Enjoying BD-Live™
– Enjoying web browsing
Table of Contents
51
51
51
52
52
53
53
54
54
– LG AV Remote
– Private Sound Mode
– Using an USB keyboard or mouse
Using the Premium
Using the LG Smart World
– Signing in
– Searching online content
Using the My Apps Menu
Using Audio Cast
71
72
7
– Notes on discs
Important Information Relating to Network
Services
1
2
5Troubleshooting
55Troubleshooting
55 – General
56 – Network
57 – Picture
57 – Customer support
57 – Open source software notice
3
4
6Appendix
58
Controlling a TV with the Supplied Remote
Control
58 – Setting up the remote to control your TV
59 Network Software Update
59 – Network update notification
59 – Software update
61 Additional Information
61 – File requirement
62 – AVCHD (Advanced Video Codec High
Definition)
63 – Certain system requirements
63 – Compatibility notes
64 Audio Output Specifications
66 Area Code List
67 Language Code List
68 Trademarks and Licenses
70Specifications
71Maintenance
71 – Handling the unit
Some of the content in this manual may differ from your player depending on the software of the
player or your service provider.
5
6
8
Getting Started
Introduction
1
Playable Discs and symbols used in this manual
Getting Started
Media/Term
Logo
Symbol
e
Blu-ray
y
u
i
r
DVD-ROM
DVD-R
DVD-RW
DVD+R
DVD+RW
Description
yy Discs such as movies that can be purchased or
rented.
yy “Blu-ray 3D” discs and “Blu-ray 3D ONLY” discs.
yy BD-R/RE discs that are recorded in BDAV format.
yy BD-R/RE discs that contain Movie, Music or Photo
files.
yy ISO 9660+JOLIET, UDF and UDF Bridge format
yy Discs such as movies that can be purchased or
rented.
yy Movie mode and finalized only
yy Supports the dual layer disc also
o
Finalized AVCHD format
y
u
i
yy DVD±R/RW discs that contain Movie, Music or
Photo files.
yy ISO 9660+JOLIET, UDF and UDF Bridge format
DVD-RW (VR)
r
VR mode and finalized only
Audio CD
t
Audio CD
CD-R/RW
y
u
i
yy CD-R/RW discs that contain Movie, Music or
Photo files.
,
>
Indicates special notes and operating features.
Note
–
Caution
–
yy ISO 9660+JOLIET, UDF and UDF Bridge format
Indicates cautions for preventing possible damages
from abuse.
Getting Started
,,Note
yy Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD±R/RW)
disc itself, some CD-R/RW (or DVD±R/RW)
discs cannot be played on the unit.
yy BD-R/RE, DVD±R/RW and CD-R/RW discs
recorded using a personal computer or a
DVD or CD Recorder may not play if the
disc is damaged or dirty, or if there is dirt or
condensation on the player’s lens.
yy If you record a disc using a personal computer,
even if it is recorded in a compatible format,
there are cases in which it may not play
because of the settings of the application
software used to create the disc. (Check with
the software publisher for more detailed
information.)
yy This player requires discs and recordings to
meet certain technical standards in order to
achieve optimal playback quality.
yy Pre-recorded DVDs are automatically set to
these standards. There are many different
types of recordable disc formats (including
CD-R containing MP3 or WMA files) and
these require certain pre-existing conditions
to ensure compatible playback.
yy Customers should note that permission
is required in order to download MP3 /
WMA files and music from the Internet.
Our company has no right to grant such
permission. Permission should always be
sought from the copyright owner.
yy You have to set the disc format option
to [Mastered] in order to make the discs
compatible with the LG players when
formatting rewritable discs. When setting the
option to Live System, you cannot use it on
LG player. (Mastered/Live File System : Disc
format system for windows Vista)
About the “7” Symbol Display
“7” may appear on your TV display during operation
and indicates that the function explained in this
owner’s manual is not available on that specific
media.
Regional Code
This unit has a regional code printed on the rear of
the unit. This unit can play only BD-ROM or DVD discs
labelled same as the rear of the unit or “ALL”.
System Select
Open the disc tray using the B (OPEN/CLOSE)
button and then, press and hold M (PAUSE) for more
than five seconds to change the color system (PAL /
NTSC /AUTO).
1
Getting Started
yy Depending on the recording software & the
finalization, some recorded discs (CD-R/RW,
DVD±R/RW, BD-R/RE) may not be playable.
9
10 Getting Started
Remote Control
1
• • • • • • a • • • • • • • • • • • • d • • • • • •
Getting Started
1 (POWER): Switches the player
ON or OFF.
B (OPEN/CLOSE): Opens and
closes the disc tray.
Colored (R, G, Y, B) buttons: Use
to navigate BD-ROM menus. They
are also used as shortcut buttons
for specific menus.
0-9 numerical buttons: Selects
numbered options in a menu.
TV Control Buttons: See page
58.
CLEAR: Removes a number when
setting the password or network
connection.
REPEAT (h): Repeats a desired
section or sequence.
• • • • • • b • • • • • •
c/v (SCAN): Searches
backward or forward.
C/V (SKIP): Goes to the
next or previous chapter / track /
file.
Z (STOP): Stops playback.
d (PLAY): Starts playback.
M (PAUSE): Pauses playback.
• • • • • • c • • • • • •
HOME (b): Displays or exits the
[Home].
Replacement of battery
(R03)
Remove the battery cover on the
rear of the remote control, and
insert a R03 (size AAA) battery
with 4 and 5 matched correctly.
TITLE/POPUP: Displays the DVD
title menu or BD-ROM’s pop-up
menu, if available.
INFO/MENU (m): Displays or
exits On-Screen Display.
Direction buttons (W/S/A/
D): Selects an option in the menu.
ENTER (b): Acknowledges menu
selection.
BACK (1): Exits the menu or
returns to the previous screen.
?: This button is not available.
DISC MENU: Accesses menu on a
disc.
Getting Started 11
Front Panel
1
Getting Started
a Disc Tray
e T (PLAY / PAUSE)
b Display Window
f I (STOP)
c Remote Sensor
g 1/! (POWER)
d R (OPEN / CLOSE)
h USB Port
Rear Panel
a AC power cord
c LAN port
b DIGITAL AUDIO OUT (OPTICAL)
d HDMI OUT
12 Connecting
Connecting to Your TV
If you have a HDMI TV or monitor, you can connect
it to this player using a HDMI cable (Type A, High
Speed HDMI™ Cable). Connect the HDMI jack on the
player to the HDMI jack on a HDMI compatible TV or
monitor.
Additional Information for HDMI
yy When you connect a HDMI or DVI compatible
device make sure of the following:
-- Try switching off the HDMI/DVI device and this
player. Next, switch on the HDMI/DVI device
and leave it for around 30 seconds, then
switch on this player.
-- The connected device’s video input is set
correctly for this unit.
2
Connecting
Rear of the unit
-- The connected device is compatible with
720x576p, 1280x720p, 1920x1080i or
1920x1080p video input.
yy Not all HDCP-compatible HDMI or DVI devices will
work with this player.
-- The picture will not be displayed properly with
non-HDCP device.
,,Note
yy If a connected HDMI device does not accept
the audio output of the player, the HDMI
device’s audio sound may be distorted or may
not output.
HDMI
cable
TV
yy When you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to “Resolution Setting” on page 13)
yy Select the type of video output from the
HDMI OUT jack using [HDMI Color Setting]
option on the [Settings] menu (see page
25).
Set the TV’s source to HDMI (Refer to TV’s Owner’s
manual).
,,Note
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make
the best connections.
yy Changing the resolution when the connection
has already been established may result in
malfunctions. To solve the problem, turn off
the player and then turn it on again.
yy When the HDMI connection with HDCP is not
verified, TV screen is changed to black screen.
In this case, check the HDMI connection, or
disconnect the HDMI cable.
yy If there are noises or lines on the screen,
please check the HDMI cable (length is
generally limited to 4.5 m).
Connecting 13
What is SIMPLINK?
Some functions of this unit are controlled by the
TV’s remote control when this unit and LG TV’s with
SIMPLINK are connected through HDMI connection.
Controllable functions by LG TV’s remote control; Play,
Pause, Scan, Skip, Stop, Power Off, etc.
LG TV’s with SIMPLINK function has the logo as
shown above.
,,Note
Depending on the disc type or playing status,
some SIMPLINK operation may differ from your
purpose or not work.
Resolution Setting
The player provides several output resolutions for
HDMI OUT jack. You can change the resolution using
[Settings] menu.
1. Press HOME (b).
2. Use A/D to select the [Settings] and press
ENTER (b). The [Settings] menu appears.
3. Use W/S to select [DISPLAY] option then press
D to move to the second level.
4. Use W/S to select the [Resolution] option then
press ENTER (b) to move to the third level.
5.Use W/S to select the desired resolution then
press ENTER (b) to confirm your selection.
1.Press B to open the disc tray.
2.Press Z (STOP) for more than 5 seconds.
yy If you select a resolution manually and then
connect the HDMI jack to TV and your TV
does not accept it, the resolution setting is
set to [Auto].
yy If you select a resolution that your TV does
not accept, the warning message will appear.
After resolution change, if you cannot see
the screen, please wait 20 seconds and the
resolution will automatically revert back to
the previous resolution.
yy The 1080p video output frame rate may
be automatically set to either 24 Hz or 50
Hz depending both on the capability and
preference of the connected TV and based on
the native video frame rate of the content on
the BD-ROM disc.
2
Connecting
Refer to the TV owner’s manual for the details of
SIMPLINK function.
,,Note
yy If your TV does not accept the resolution you
have set on the player, you can set resolution
to 576p as follows:
14 Connecting
Connecting to an
Amplifier
Make one of the following connections, depending on
the capabilities of your existing equipment.
Connecting to an Amplifier via
HDMI Output
Connect the player’s HDMI OUT jack to the
corresponding in jack on your amplifier using a HDMI
cable.
yy HDMI Audio connection (page 14)
yy Digital Audio connection (page 15)
2
Rear of the unit
Connecting
Since many factors affect the type of audio output,
see “Audio Output Specifications” for details (page
64).
About Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this, you need a multi-channel
Audio/Video Receiver that supports one or more of
the audio formats supported by your player. Check
the logos on the front of the Audio/Video receiver
and the manual. (PCM Stereo, PCM Multi-Ch, Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, DTS and/or
DTS-HD)
HDMI cable
Receiver/Amplifier
HDMI
cable
TV
Connect the amplifier’s HDMI output jack to HDMI
input jack on your TV using a HDMI cable if your
amplifier has HDMI output jack. (Refer to amplifier’s
owner’s manual.)
You will need to activate the player’s digital output.
(See “[AUDIO] Menu” on page 26)
Connecting 15
Connecting to an Amplifier via
Digital Audio Output
Connect the player’s OPTICAL AUDIO OUT jack to
the corresponding in jack on your amplifier using an
optional digital audio cable.
Rear of the unit
2
Connecting
Optical
cable
Receiver/Amplifier
You will need to activate the player’s digital output.
(See “[AUDIO] Menu” on page 26.)
16 Connecting
Connecting to your
Home Network
2
Connecting
This player can be connected to a local area network
(LAN) via the LAN port on the rear panel or the
internal wireless module.
By connecting the unit to a broadband home
network, you have access to services such as
software updates, BD-Live interactivity and on-line
content services.
Broadband
service
Router
Wired network connection
Using a wired network provides the best
performance, because the attached devices connect
directly to the network and are not subject to radio
frequency interference.
Please refer to the documentation for your network
device for further instructions.
DLNA certified servers
Connect the player’s LAN port to the corresponding
port on your Modem or Router using a commercially
available LAN or Ethernet cable.
,,Note
yy When plugging or unplugging the LAN cable,
hold the plug portion of the cable. When
unplugging, do not pull on the LAN cable but
unplug while pressing down on the lock.
yy Do not connect a modular phone cable to the
LAN port.
yy Since there are various connection
configurations, please follow the
specifications of your telecommunication
carrier or internet service provider.
yy If you want to access content from DLNA
servers, this player must be connected to
the same local area network with them via a
router.
yy To set your PC as a DLNA server, install the
SmartShare PC Software on your PC. (page
36)
Rear of the unit
Connecting 17
Wired Network Setup
Advanced Setting
If there is a DHCP server on the local area network
(LAN) via wired connection, this player will
automatically be allocated an IP address. After
making the physical connection, a small number of
home networks may require the player’s network
setting to be adjusted. Adjust the [NETWORK]
setting as follow.
If you want to set the network settings manually, use
W/S to select [Advanced Setting] on the [Network
Setting] menu and press ENTER (b).
1. Use W/S to select [Wired] and press ENTER
(b).
2
Preparation
1. Select [Connection Setting] option in the
[Settings] menu then press ENTER (b).
2. Read the preparations for the network settings
and then press ENTER (b) while [Start] is
highlighted.
Network will automatically be connected to the
unit.
2.Use W/S/A/D to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
,,Note
If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server] using
W/S/A/D and numerical buttons. If you
make a mistake while entering a number, press
CLEAR to clear the highlighted part.
3. Select [Next] and press ENTER (b) to apply
network settings.
Network connection status is displayed on the
screen.
4. Press ENTER (b) while [OK] is highlighted to
finish the wired network settings.
Connecting
Before setting the wired network, you need to
connect the broadband internet to your home
network.
18 Connecting
Wireless network connection
Another connection option is to use an Access Point
or a wireless router. The network configuration and
connection method may vary depending on the
equipment in use and the network environment.
Preparation
Before setting the wireless network, you need
to:
-- Connect the broadband internet to the
wireless home network.
-- Set the access point or wireless router.
-- Note the SSID and security code of the
network.
2
Connecting
1. Select [Connection Setting] option in the
[Settings] menu then press ENTER (b).
Wireless
Communication
DLNA certified servers
2. Read the preparations for the network settings
and then press ENTER (b) while [Start] is
highlighted.
Access Point or
Wireless Router
Broadband
service
If wired network is not connected to the unit, all
available networks are displayed on the screen.
3.Use W/S to select a desired SSID of wireless
network and press ENTER (b).
Refer to the setup instructions supplied with
your access point or wireless router for detailed
connection steps and network settings.
For best performance, a direct wired connection from
this player to your home network’s router or cable/
DSL modem is always the best option.
If you do choose to use the wireless option, note that
performance can sometimes be affected by other
electronic devices in the home.
Wireless network setup
For the wireless network connection, the player
needs to be set up for network communication. This
adjustment can be done from the [Settings] menu.
Adjust the [NETWORK] setting as follow. Setting up
the access point or the wireless router is required
before connecting the player to the network.
If you have security on your access point, you
need to input the security code as necessary.
,,Note
If you use other characters than the english
alphabet or digits for the SSID name of your
access point or wireless router, it may be
displayed differently.
Connecting 19
Advanced Setting
If you want to set the network settings manually, use
W/S to select [Advanced Setting] on the [Network
Setting] menu and press ENTER (b).
1. Use W/S to select [Wireless] and press ENTER
(b).
,,Note
yy WEP security mode generally have 4 keys
available on an access point setting. If your
access point or wireless router use WEP
security, enter the security code of the key
“No.1” to connect on your home network.
4.Use W/S/A/D to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
,,Note
If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server] using W/S/A/
D and numerical buttons. If you make a mistake
while entering a number, press CLEAR to clear
the highlighted part.
5. Select [Next] and press ENTER (b) to apply
network settings.
[AP List] - Scans all available access points or
wireless routers within range and display them as
a list.
[Network name (SSID)] – Your access point may
not be broadcasting its network name (SSID).
Check your access point settings through your
computer and either set your access point to
broadcast SSID, or manually enter the network
name in [Network name(SSID)].
[PBC] – If your access point or wireless
router that supports the PBC (Push Button
Configuration) method, select this option and
press the Push Button on your access point
within 120 counts. You do not need to know the
network name (SSID) and security code of your
access point.
[PIN] – If your access point supports the PIN
Code configuration method based on WPS(WiFi Protected Setup), select this option and note
the code number on the screen. And then, enter
the PIN number on a setting menu of your access
point to connect. Refer to the documentation for
your network device.
2. Follow the instructions of each connection
method on the screen.
Network connection status is displayed on the
screen.
6. Select [OK] and press ENTER (b) to complete
the network connection.
,,Note
To use PBC and PIN network connection,
security mode of your access point must be set
to OPEN or AES.
Connecting
yy An Access Point is a device that allows you to
connect to your home network wirelessly.
2
20 Connecting
Notes on Network Connection
yy Many network connection problems during set
up can often be fixed by re-setting the router or
modem. After connecting the player to the home
network, quickly power off and/or disconnect the
power cable of the home network router or cable
modem. Then power on and/or connect the power
cable again.
2
Connecting
yy Depending on the internet service provider (ISP),
the number of devices that can receive internet
service may be limited by the applicable terms of
service. For details, contact your ISP.
yy Our company is not responsible for any
malfunction of the player and/or the internet
connection feature due to communication errors/
malfunctions associated with your broadband
internet connection, or other connected
equipment.
yy The features of BD-ROM discs made available
through the Internet Connection feature are not
created or provided by our company, and our
company is not responsible for their functionality
or continued availability. Some disc related material
available by the Internet Connection may not be
compatible with this player. If you have questions
about such content, please contact the producer
of the disc.
yy Some internet contents may require a higher
bandwidth connection.
yy Even if the player is properly connected and
configured, some internet contents may not
operate properly because of internet congestion,
the quality or bandwidth of your internet service,
or problems at the provider of the content.
yy Some internet connection operations may not
be possible due to certain restrictions set by the
Internet service provider (ISP) supplying your
broadband Internet connection.
yy Any fees charged by an ISP including, without
limitation, connection charges are your
responsibility.
yy A 10 Base-T or 100 Base-TX LAN port is required
for wired connection to this player. If your internet
service does not allow for such a connection, you
will not be able to connect the player.
yy You must use a Router to use xDSL service.
yy A DSL modem is required to use DSL service and
a cable modem is required to use cable modem
service. Depending on the access method of and
subscriber agreement with your ISP, you may not
be able to use the internet connection feature
contained in this player or you may be limited to
the number of devices you can connect at the
same time. (If your ISP limits subscription to one
device, this player may not be allowed to connect
when a PC is already connected.)
yy The use of a “Router” may not be allowed or its
usage may be limited depending on the policies
and restrictions of your ISP. For details, contact
your ISP directly.
yy The wireless network operate at 2.4 GHz radio
frequencies that are also used by other household
devices such as cordless telephone, Bluetooth®
devices, microwave oven, and can be affected by
interference from them.
yy Turn off all unused network equipment in your
local home network. Some devices may generate
network traffic.
yy For the purpose of the better transmission, placing
the player from the access point as close as
possible.
yy In some instances, placing the access point or
wireless router at least 0.45 m above the floor
may improve the reception.
yy Move closer to the access point if possible or reorient the player so there is nothing between it
and the access point.
yy The reception quality over wireless depends on
many factors such as type of the access point,
distance between the player and access point, and
the location of the player.
yy Set your access point or wireless router to
Infrastructure mode. Ad-hoc mode is not
supported.
System Setting 21
Initial Setup
When you turn on the unit for the first time, the
initial setup wizard appears on the screen. Set the
display language and network settings on the initial
setup wizard.
5.Use W/S/A/D to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
1.Press 1 (POWER).
The initial setup wizard appears on the screen.
2.Use W/S/A/D to select a display language
and press ENTER (b).
6. Select [Next] and press ENTER (b) to apply
network settings.
3
Network connection status is displayed on the
screen.
For details on network settings, refer to
“Connecting to your Home Network” on page
16.
7. Check all the settings that you have set in the
previous steps.
If wired network is connected, the network
connection setting will automatically be finished.
4. All available networks are displayed on the screen.
Use W/S to select [Wired Network] or desired
SSID of wireless network and press ENTER (b).
Press ENTER (b) while [Finish] is highlighted
to finish the initial setup settings. If there is any
settings to be changed, use W/S/A/D to
select 1 and press ENTER (b).
8. Displays private sound mode guide. Press ENTER
(b).
If you have security on your access point, you
need to input the security code as necessary.
System Setting
3. Read and prepare the preparations for the
network settings and then press ENTER (b)
while [Start] is highlighted.
22 System Setting
Settings
Adjust the Setup Settings
You can change the settings of the player in the
[Settings] menu.
1. Press HOME (b).
[NETWORK] Menu
The [NETWORK] settings are needed to use the
software update, BD-Live and on-line content
services.
Connection Setting
If your home network environment is ready to
connect the player, the player needs to be set the
wired or wireless network connection for network
communication. (See “Connecting to your Home
Network” on page 16.)
Connection Status
3
System Setting
2.Use A/D to select the [Settings] and press
ENTER (b). The [Settings] menu appears.
If you want to check the network status on this
player, select the [Connection Status] options and
press ENTER (b) to check whether a connection to
the network and the internet have been established.
BD-LIVE connection
You can restrict Internet access when BD-Live
functions are used.
[Permitted]
3.Use W/S to select the first setup option, and
press ENTER (b) to move to the second level.
Internet access is permitted for all BD-Live
contents.
[Partially permitted]
Internet access is permitted only for BD-Live
contents which have content owner certificates.
Internet access and AACS Online functions are
prohibited for all BD-Live contents without a
certificate.
[Prohibited]
4.Use W/S to select a second setup option, and
press ENTER (b) to move to the third level.
5.Use W/S to select a desired setting, and press
ENTER (b) to confirm your selection.
Internet access is prohibited for all BD-Live
contents.
System Setting 23
Smart Service Setting
[Country Setting]
Select your area for displaying proper online
content service.
[Initialize]
Depending on rhe region, [Initialize] function may
not be available.
Device Name
You can make a network name using virtual keyboard.
This player will be recognised by the name you are
entering on your home network.
Wi-Fi Direct
This function allows you to control the playback
of media streamed from DLNA media server by a
DLNA certified smartphone. Most DLNA certified
smartphone has a function to control the playback
media on your home network. Set this option to
[On] for allowing your smartphone to control this
unit. Refer to instructions of your DLNA certified
smartphone or the application for more detailed
information.
,,Note
yy This unit and the DLNA Certified Smartphone
must be connected to the same network.
yy To use the [Network Play] function using a
DLNA certified smartphone, press HOME
(b) to display the home menu before
connecting to this unit.
yy While controlling the unit using the [Network
Play] function, the remote control may not
work.
yy Available file formats described on page
61 are not always supported on [Network
Play] function.
3
System Setting
This player is a Wi-Fi Direct™ certified device. WiFi Direct is the technology that devices to connect
each other without connecting to an Access point or
a router. Press ENTER (b) to display the Wi-Fi Direct
menu. Refer to page 48 for the device connection.
Network Play
24 System Setting
[DISPLAY] Menu
Resolution
TV Aspect Ratio
Sets the output resolution of the HDMI video signal.
Refer to page 13 for details about the resolution
setting.
Select a TV aspect ratio option according to your TV
type.
3
[Auto]
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking bars
above and below the picture.
If the HDMI OUT jack is connected to
TVs providing display information (EDID),
automatically selects the resolution best suited
to the connected TV.
[4:3 Pan Scan]
[576p]
Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
[720p]
[4:3 Letter Box]
System Setting
[16:9 Original]
Select when a 16:9 wide TV is connected. The
4:3 picture is displayed with an original 4:3
aspect ratio, with black bars appearing at the left
and right sides.
[16:9 Full]
Select when a 16:9 wide TV is connected. The
4:3 picture is adjusted horizontally (in a linear
proportion) to fill the entire screen.
,,Note
You cannot select [4:3 Letter Box] and
[4:3 Pan Scan] option when the resolution is set
to higher than 720p.
Outputs 576 lines of progressive video.
Outputs 720 lines of progressive video.
[1080i]
Outputs 1080 lines of interlaced video.
[1080p]
Outputs 1080 lines of progressive video.
Ultra HD Upscaling
This feature allows the unit to up-scale the original
video resolution to Ultra HD resolution and output via
HDMI connection.
[Auto]
If you connect a display capable of displaying
Ultra HD resolution, this unit will output video
signals in Ultra HD resolution automatically.
[Off]
The unit will turn off the Up-scaling feature.
,,Note
yy This unit will output video signals in Ultra
HD resolution when it plays BD-ROM disc
formatted in 24 Hz.
yy The playback pictures may be momentarily
interrupted when the resolutions switch.
System Setting 25
1080p Display Mode
HDMI Color Setting
When the resolution is set to 1080p, select
[24 Hz] for smooth presentation of film material
(1080p/24 Hz) with a HDMI-equipped display
compatible with 1080p/24 Hz input.
Select the type of output from the HDMI OUT jack.
For this setting, please refer to the manuals of your
display device.
,,Note
yy When you select [24 Hz], you may experience
some picture disturbance when the video
switches video and film material. In this case,
select [50 Hz].
yy Even when [1080p Display Mode] is set to
[24 Hz], if your TV is not compatible with
1080p/24 Hz, the actual frame frequency of
the video output will be 50 Hz to match the
video source format.
[YCbCr]
Select when connecting to a HDMI display device.
[RGB]
Select when connecting to a DVI display device.
3D Mode
Select the type of output mode for Blu-ray 3D disc
playback. (This function is activated only when 3D TV
is connected.)
Blu-ray 3D disc playback will output as 3D mode.
[Off]
Blu-ray 3D disc playback will output as 2D mode
like a normal BD-ROM disc playback.
Home Menu Guide
This function allows you to display or delete the guide
bubble on the Home Menu. Set this option to [On]
for displaying guide.
3
System Setting
[On]
26 System Setting
[LANGUAGE] Menu
[AUDIO] Menu
Display Menu
Each disc has a variety of audio output options. Set
the player’s Audio options according to the type of
audio system you use.
Select a language for the [Settings] menu and onscreen display.
Disc Menu/Disc Audio/
Disc Subtitle
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[Original]
3
Refers to the original language in which the disc
was recorded.
System Setting
[Other]
Press ENTER (b) to select another language.
Use number buttons then press ENTER (b)
to enter the corresponding 4-digit number
according to the language code list on page
67.
[Off] (Disc Subtitle only)
Turn off Subtitle.
,,Note
Depending on the disc, your language setting
may not work.
,,Note
Since many factors affect the type of audio
output, see “Audio Output Specifications” on
page 64 for details.
Digital Output
[Auto]
Select if you connect this unit’s DIGITAL AUDIO
OUT and HDMI OUT jack to a device with LPCM,
Dolby Digital, Dolby Digital Plus, Dolby TrueHD,
DTS and DTS-HD decoder.
[PCM]
Select if you connect this unit’s HDMI OUT
jack to a device with digital decoder or DIGITAL
AUDIO OUT jack to a device with two channel
digital stereo decoder.
[DTS Re-Encode]
Select if you connect this unit’s HDMI OUT or
DIGITAL AUDIO OUT jack to a device with DTS
decoder.
,,Note
yy When [Digital Output] option is set to
[Auto], the audio may output as bitstream.
If the Bitstream information is not detected
from HDMI device with EDID, the audio may
output as PCM.
yy If the [Digital Output] option is set to [DTS
Re-Encode], the DTS Re-Encode audio is
outputted for BD-ROM discs with secondary
audio and the original audio is outputted for
the other discs (like [Auto]).
System Setting 27
Sampling Freq.
(Digital Audio Output)
[48 kHz]
Select this if your A/V Receiver or Amplifier is not
capable of handling 192 kHz and 96 kHz signal.
When this choice is made, this unit automatically
converts any 192 kHz and 96 kHz signals to 48
kHz so your system can decode them.
[96 kHz]
Select this if your A/V Receiver or Amplifier is
not capable of handling 192 kHz signals. When
this choice is made, this unit
automatically converts any 192 kHz signals to
96 kHz so your system can decode them.
Select this if your A/V Receiver or Amplifier is
capable of handling 192 kHz signals.
Check the documentation for your A/V Receiver or
Amplifier to verify its capabilities.
DRC (Dynamic Range Control)
This function allows you to listen to a movie at a
lower volume without losing clarity of sound.
[Auto]
The dynamic range of the Dolby TrueHD audio
output is specified by itself.
And the dynamic range of the Dolby Digital and
Dolby Digital Plus are operated as same as the
[On] mode.
[On]
Compress the dynamic range of the Dolby Digital,
Dolby Digital Plus or Dolby TrueHD audio output.
[Off]
Turns off this function.
,,Note
The DRC setting can be changed only when a
disc is not inserted or the unit is in complete
stop mode.
If you are using LG smart Hi-Fi audio system MUSIC
flow, you can connect this unit to the multi-room
audio system to enjoy Hi-Fi sound wirelessly.
Set the speaker’s output using A/D and select
[OK] using W/S.
,,Note
yy If you select [Mute Blu-ray Disc™ Player] in
[External Speaker] menu, you can listen using
only MUSIC flow.
yy If you use this unit with MUSIC flow, at least
one unit should be connected by LAN cable.
For more detail for using with MUSIC flow,
refer to the MUSIC flow’s user manual.
yy It is recommended to connect up to 4
speakers for smooth playback.
yy Install the speakers and the unit in place
without signal interference for smooth
playback.
yy If your MUSIC flow is not displayed on the
external speaker list, reset network setting
on the setting menu.
3
System Setting
[192 kHz]
External Speaker
28 System Setting
[LOCK] Menu
DVD Rating
The [LOCK] settings affect only BD-ROM and DVD
playback.
Blocks playback of rated DVD based on their content.
(Not all discs are rated.)
To access the any features in [LOCK] settings, you
must enter the 4-digit security code you have
created.
If you have not entered a password yet, you are
prompted to do so. Enter a 4-digit password twice,
and press ENTER (b) to create a new password.
Password
You can create or change the password.
[None]
3
System Setting
Enter a 4-digit password twice, and press ENTER
(b) to create a new password.
[Change]
Enter the current password and press ENTER
(b). Enter a 4-digit password twice, and press
ENTER (b) to create a new password.
If you forget your password
If you forget your password, you can clear it using the
following steps:
1. Remove any disc that might be in the player.
2. Highlight [Password] option in the [Settings]
menu.
3. Use colored buttons to enter “Red -> Green ->
Yellow -> Green -> Yellow -> Blue”.
The password is cleared.
,,Note
If you make a mistake before pressing ENTER
(b), press CLEAR. Then input the correct
password.
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select [Unlock], parental control is not
active and the disc plays in full.
Blu-ray Disc Rating
Set an age limit of BD-ROM play. Use number buttons
to input an age limit for BD-ROM viewing.
[255]
All BD-ROM can be played.
[0-254]
Prohibits play of BD-ROM with corresponding
ratings recorded on them.
,,Note
The [Blu-ray Disc Rating] will be applied only for
the Blu-ray disc that containing the Advanced
Rating Control.
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list on
page 66.
System Setting 29
[OTHERS] Menu
Quick Start
Pointer
This player can stay in standby mode with low power
consumption, so that the player can instantly boot
without delay when you turn on this unit. Set this
option to [On] for activating [Quick Start] function.
Sets the speed and size of magic pointer. When you
connect a mouse to the unit, the USB mouse pointer
appears.
[Speed]
Sets the moving speed of the USB mouse
pointer.
[Size]
Chooses the size of the USB mouse pointer.
,,Note
yy If [Quick Start] option is set to [On] and
an AC power is accidently re-connected to
the player by power failure etc., the player
automatically boots itself to be the standby
status. Before operating the player, wait for a
while until the player is in standby status.
Auto Power Off
The screen saver appears when you leave the player
in Stop mode for about 5 minutes. If you set this
option to [On], the unit automatically turns off within
15 minutes since the Screen Saver is displayed. Set
this option to [Off] to leave the screen saver until the
unit is operated by the user.
3
System Setting
yy When [Quick Start] is set to [On], power
consumption will be higher than when [Quick
Start] is set to [Off].
30 System Setting
Initialize
[Factory Set]
[Information]
You can reset the player to its original factory
settings.
Displays the current software version.
[Blu-ray Storage Clear]
You can update the software by connecting the
unit directly to the software update server (see
page 59).
Initializes the BD-Live contents from the
connected USB storage.
,,Note
3
Software
If you reset the player to its original factory
settings using [Factory Set] option, you have to
set all the activation for the on-line services and
network settings again.
[Update]
System Setting
Operating 31
Home Menu Display
Using [HOME] menu
The home menu appears when you press HOME (b).
Use W/S/A/D to select a category and press
ENTER (b).
Using the SmartShare
You can play video, photo and audio content on the
unit by inserting a disc, connecting an USB device
and Android device (MTP) or using home network
(DLNA).
1.Press HOME (b) to display the home menu.
2. Select [SmartShare] and press ENTER (b).
,,Note
4
a Displays all linked devices.
b Displays video, photo or audio content.
a [SmartShare] - Displays SmartShare menu.
[Premium] - Displays the Premium home
b
screen. (page 52)
c
[LG Smart World] - Displays LG Apps titles
provided to the unit. (page 52)
d
[My Apps] - Displays the [My Apps] screen.
(page 54)
e [Settings] - Adjusts the system settings.
f
[d] - Searches for desired LG Apps and other
content.
g [c] - Displays login menu.
c Displays the file or folder on linked device.
Operating
Depending on the region, the [LG Smart World],
[My Apps], [d] and [c] may not be available.
32 Operating
Playing the Linked
Devices
Playing a Disc
erot
1.Press B (OPEN/CLOSE), and place a disc on the
disc tray.
2.Press B (OPEN/CLOSE) to close the disc tray.
For the most Audio CD, BD-ROM and
DVD-ROM discs, playback starts automatically.
3.Press HOME (b) and then select [SmartShare].
4. Select disc icon.
,,Note
4
Operating
yy Playback functions described in this manual
are not always available in every files and
media. Some functions can be restricted
depending on many factors.
yy Depending on the BD-ROM titles, a USB
device connection may be needed for the
proper playback.
yy Unfinalized DVD-VR format discs may not be
played in this player.
yy Some DVD-VR discs are made with CPRM
data by DVD RECORDER. This unit cannot
support these kinds of discs.
Playing Blu-ray 3D disc
e
This player can play the Blu-ray 3D discs which
contains separate views for the left and right eyes.
Preparation
In order to playback Blu-ray 3D title in
stereoscopic 3D mode, you need to:
yy Check your TV is 3D capable and has HDMI
input(s).
ear 3D glasses to enjoy the 3D experience
yy W
if it is necessary.
yy Check whether the BD-ROM title is the Bluray 3D disc or not.
yy Connect an HDMI cable (Type A, High Speed
HDMI™ Cable) between the player’s HDMI
output and TV’s HDMI input.
1.Press HOME (b), and set the [3D Mode] option
on the [Settings] menu to [On] (page 25).
2.Press B (OPEN/CLOSE), and place a disc on the
disc tray.
3.Press B (OPEN/CLOSE) to close the disc tray.
The playback starts automatically.
4. Refer to the owner’s manual of your 3D-ready TV
for the further instruction.
You may need to adjust the display settings and
focus on your TV’s setting for the improved 3D
effect.
>>Caution
yy Watching a 3D content for a long period time
may cause dizziness or tiredness.
yy It is not recommended to watch a movie
in 3D mode for infirm, child and pregnant
woman.
yy If you are experiencing headache, tiredness
or dizziness while viewing contents in 3D, it is
strongly recommended to stop the playback
and rest until you feel normal.
Operating 33
Playing a file on disc/USB device
yui
This player can play video, audio and photo files
contained in the disc or USB device.
1. Insert a data disc on the tray or connect an USB
device.
Notes on USB device
yy This player supports USB flash drive/external HDD
formatted in FAT32 and NTFS when accessing
files (music, photo, movie). However, for BD-Live,
use the USB flash drive / external HDD formatted
in FAT32.
yy This unit can support up to 4 partitions of the USB
device.
yy Do not extract the USB device during operation
(play, etc.).
yy An USB device which requires additional program
installation when you have connected it to a
computer, is not supported.
yy USB device: USB device that supports USB1.1 and
USB2.0.
File loading may take few minutes depending on the
number of content stored in the USB storage device.
Press ENTER (b) while [Cancel] is selected to stop
loading.
2.Press HOME (b).
3. Select [SmartShare] and press ENTER (b).
yy Video, audio and photo files can be played. For
details of playing each file type, refer to the
relevant pages.
yy Regular back up is recommended to prevent data
loss.
4
yy If you use an USB extension cable, USB HUB or
USB Multi-reader, the USB device may not be
recognized.
Operating
When you connect the USB device on the HOME
menu, the player plays an audio file contained in the
USB storage device automatically. If the USB storage
device is containing various types of files, a menu for
the file type selection will appear.
yy Some USB device may not work with this unit.
yy Some digital cameras and mobile phones are not
supported.
yy USB Port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
4. Select the desired linked device in the category.
5. Select [Movie], [Photo] or [Music].
6. Select a file using W/S/A/D, and press
d (PLAY) or ENTER (b) to play the file.
34 Operating
Playing a file on Android device
yui
Notes on Connecting Android device
This player can play video, audio and photo files
contained in Android device.
yy Do not extract Android device during operation
(play, etc.).
1. Connect Android device to the unit with USB
cable.
yy Video, audio and photo files can be played. For
details of operations on each file, refer to relevant
pages.
yy This unit can support only MTP (Media Transfer
Protocol) Android device.
yy Regular back up is recommended to prevent data
loss.
yy If you use an USB extension cable, USB HUB or
USB Multi-reader, Android device may not be
recognized.
2.Press HOME (b).
3. Select [MTP] and press ENTER (b).
4
Operating
File loading may take few minutes depending on
the number of content stored in Android device.
4. Select [Movie], [Photo] or [Music].
5. Select a file using W/S/A/D, and press
d (PLAY) or ENTER (b) to play the file.
yy Some Android device may not work with this unit.
yy When you use MTP, playing some music, photo,
movie, or subtitle files may not work depending on
Android device.
Operating 35
Playing a file on a network
server
yui
This player can play video, audio and photo files
located in a DLNA server through your home
network.
1. Check the network connection and settings (page
16).
2.Press HOME (b).
3. Select [SmartShare] and press ENTER (b).
,,Note
yy The file requirements are described on page
61.
yy The thumbnail of the unplayable files can be
displayed, but those cannot be played on this
player.
yy The subtitle file name and video file name
have to be the same and located at the same
folder.
yy The playback and operating quality may be
affected by your home network condition.
yy You may experience connection problems
depending on your server’s environment.
yy To set your PC as a DLNA server, install the
SmartShare PC Software on your PC. (page
36)
4. Select a DLNA media server in the category.
5. Select [Movie], [Photo] or [Music].
Operating
6. Select a file using W/S/A/D, and press
d (PLAY) or ENTER (b) to play the file.
4
36 Operating
Using Home Network
Server for PC
Before connecting to PC to play a file, SmartShare PC
Software should be installed on your PC.
About SmartShare PC Software
SmartShare PC Software is for sharing video, audio
and photo files stored on your computer to this unit
as a network media server.
Downloading SmartShare PC
Software
4
Operating
1. Start up your computer, visit http://www.lg.com.
If necessary, select your region.
2. Click support tab.
3. Fill your model name on the cover of owner’s
manual in search bar.
4. Find and download the “SmartShare PC
Software” file.
Installing SmartShare PC
Software
1. Before installation, close all running programs
including firewall and Anti-Virus programs.
2. Unzip and double-click “Setup.exe” to install
SmartShare PC Software. The installation is
prepared and the installation wizard appears.
3. Follow the directions of the installation wizard
displayed on the screen.
4. Click the [Exit] button to complete the
installation.
,,Note
yy SmartShare PC Software is not supported
with Mac OS.
yy The SmartShare PC Software is a customized
software edition only for sharing files and
folders to this player.
yy This manual explains operations with the
English version of SmartShare PC Software
as examples. Follow the explanation referring
to the actual operations of your language
version.
Operating 37
Sharing files and folders
System requirements
On your computer, you must share the folder
containing video, audio and/or photo content to play
them on this player.
Minimum System
This part explains the procedure for selecting the
shared folders on your computer.
1. Double-click the “SmartShare” icon.
2. Click [Movie], [Photo] or [Music] icon on the
center, and then click [Settings] on the top right
corner of the SmartShare PC Software. The
[Settings] menu appears on the screen.
3. Click [My Shared Contents] tab, and then click
icon. The [Add/Remove Shared Folders] menu
appears on the screen.
4. Click the folder containing the files you want to
share and then click the [OK]. The checked folder
is added to the [My Shared Contents] and then
click the [OK] at the bottom of the [Settings]
menu.
,,Note
yy If the shared folders or files are not displayed
on the player, click the [My Shared Contents]
on the [Settings] menu, and then click
icon.
yy For more information, click [HELP] on the
[Settings] menu.
yy Memory : 1 GB of free RAM
yy Graphics card : 64 MB video memory, minimum
resolution of 1024 x 768 pixels, and 16 bit color
settings
yy Free Disk Space : 200 MB
yy Windows® XP (Service Pack 2 or higher), Windows
Vista®, Windows® 7, Windows® 8.0, Windows®
8.1
yy Windows® Media Player® 11.0 or higher
yy Network environment: 100 Mb Ethernet, WLAN
Recommended System
yy CPU : Intel® Core™ Duo or AMD Athlon™ 64X2,
1.7 GHz or better
yy Memory : 2 GB of free RAM
yy Graphics card : 128 MB video memory, minimum
resolution of 1024 x 768 pixels, and 16 bit color
settings
yy Free Disk Space : 200 MB
yy Windows® XP (Service Pack 2 or higher), Windows
Vista®, Windows® 7, Windows® 8.0, Windows®
8.1
yy Windows® Media Player® 11.0 or higher
yy Network environment: 100 Mb Ethernet, WLAN
4
Operating
5. Make sure that the SmartShare (DLNA) service
turns on at the [Service] tab.
yy CPU : Intel® 2.0 GHz or AMD Sempron™ 2000+
processors
38 Operating
General Playback
Basic operations for photo
content
Basic operations for video and
audio content
To play a slide show
To stop playback
To stop a slide show
Press Z (STOP) during playback.
To pause playback
Press M (PAUSE) during playback.
Press d (PLAY) to resume playback.
To play frame-by-frame (Video)
Press M (PAUSE) during video playback.
Press M (PAUSE) repeatedly to play Frame-by-Frame
playback.
4
To scan forward or backward
Operating
Press c or v to play fast forward or fast reverse
during playback.
You can change the various playback speeds by
pressing c or v repeatedly.
To slow down the playing speed (Video)
While the playback is paused, press v repeatedly
to play various speeds of slow motion.
To skip to the next/previous
chapter/track/file
During playback, press C or V to go to the next
chapter/track/file or to return to the beginning of the
current chapter/track/file.
Press C twice briefly to step back to the previous
chapter/track/file.
In the file list menu of a server, there may have many
types of content in a folder together. In this case,
press C or V to go to the previous or next
content with same type.
Press d (PLAY) to start slide show.
Press Z (STOP) while slide show.
To pause a slide show
Press M (PAUSE) while slide show.
Press d (PLAY) to re-start the slide show.
To skip to the next/previous photo
While viewing a photo in full screen, press A or D to
go to the previous or next photo.
Using the disc menu
ero
To display the disc menu
The menu screen may be displayed first after loading
a disc which contains a menu. If you want to display
the disc menu during playback, press DISC MENU.
Use W/S/A/D buttons to navigate through
menu items.
To display the Pop-up menu
Some BD-ROM discs contain Pop-up menu that
appears during playback.
Press TITLE/POPUP during playback, and use W/
S/A/D buttons to navigate through menu items.
Operating 39
Resume playback
eroyt
u
The unit records the point where you pressed the Z
(STOP) depending on the disc.
If “MZ (Resume Stop)” appears on the screen briefly,
press d (PLAY) to resume playback (from the scene
point).
If you press Z (STOP) twice or unload the disc,
“Z(Complete Stop)” appears on the screen. The unit
will clear the stopped point.
,,Note
This unit memorizes the last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the unit or switch
off the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
,,Note
yy Last Scene Memory function for a previous
disc is erased once a different disc is played.
yy This function may not work depending on the
disc.
yy On BD-ROM discs with BD-J, the last scene
memory function does not work.
yy This unit does not memorize settings of a disc
if you switch off the unit before commencing
to play it.
4
Operating
yy The resume point may be cleared when a
button is pressed (for example; 1 (POWER),
B (OPEN/CLOSE), etc).
yy On BD-ROM discs with BD-J, the resume
playback function does not work.
yy If you press Z (STOP) once during BD-ROM
interactive title playback, the unit will be in
Complete Stop mode.
Last Scene Memory
er
40 Operating
On-Screen Display
Displaying content information onscreen
You can display and adjust various information and
settings about the content.
eroy
To control video playback
eroy
2. Select an [Option] using A/D, and press ENTER
(b).
1. During playback, press INFO/MENU (m).
You can control playback and set options while
watching videos.
During playback, press INFO/MENU (m).
4
a Progress bar - Displays the current position
and total playing time.
Operating
b [Disc Menu] - Accesses menu on a disc.
c [Title/Popup] - Displays the DVD title menu or
BD-ROM’s pop-up menu, if available.
a Title – Current title number/total number of
titles
d [Option] - Displays playback information.
b Chapter – Current chapter number/total
number of chapters
e [Repeat] - Repeats a desired section or
sequence. (page 42)
f [3D] - Adjusts the 3D setting. (page 47)
c Time – Elapsed playing time/total playback time
d Audio – Selected audio language or channel
e Subtitle – Selected subtitle.
f Angle – Selected angle/total number of angles
g TV Aspect Ratio – Selected TV aspect ratio
h Picture Mode – Selected picture mode
Operating 41
,,Note
yy If no button is pressed for a few seconds, the
on-screen display disappears.
yy A title number cannot be selected on some
discs.
yy Available items may differ depending on discs
or titles.
Setting the slide show option
You can use various options during viewing a photo in
full screen.
1. While viewing pictures, press INFO/MENU (m).
2. Select an [Option] using A/D, and press ENTER
(b).
yy If an interactive Blu-ray Disc is playing back,
some setting information is displayed on the
screen but prohibited to be changed.
To control photo view
Controls playback and sets options while viewing
pictures in full screen.
You can control playback and set options while
viewing pictures in full screen.
While viewing pictures, press INFO/MENU (m).
a [Speed] - Use A/D to select a delaying speed
between photos in a slide show.
c [Music Select] – Select the background music
for the slide show (page 46).
a [Slideshow] - Starts or pause slide show.
b [Music] - Select the background music for the
slide show
c [Option] - Displays slide show options.
d [Rotate] - Rotates the photo clockwise.
e [Zoom] - Displays the [Zoom] menu.
4
Operating
b [Effect] - Use A/D to select a transition
effect between photos in a slide show.
42 Operating
Advanced Playback
Repeating a specific portion
eroty
Repeat playback
erotu
y
This player can repeat a portion you have selected.
Blu-ray Disc / DVD / Video files
During playback, press REPEAT (h) to select a
desired repeat mode.
A-B – Selected portion will be repeated continually.
Chapter – The current chapter will be played back
repeatedly.
1. During playback, press REPEAT (h).
2. Select [A-B], and press ENTER (b).
3. Press ENTER (b) at the beginning of the portion
you wish to repeat.
4. Press ENTER (b) at the end of the portion. Your
selected portion will be repeated continually.
5. To return to normal playback, press CLEAR.
,,Note
Title – The current title will be played back repeatedly.
yy You cannot select a portion less than 3
seconds.
All – All the titles or files will be played back
repeatedly.
yy This function may not work on some disc or
title.
Off – Returns to normal playback.
4
To return to normal playback, press CLEAR.
Operating
Audio CDs/Audio files
During playback, press REPEAT (h) repeatedly to
select a desired repeat mode.
– Selected portion will be repeated continually.
(Audio CD only)
Playing from selected time
eroy
1. During playback, press INFO/MENU (m).
2. Select an [Option] using A/D, and press ENTER
(b).
Track– The current track or file will be played
back repeatedly.
3. Select the [Time] option and then input the
required start time in hours, minutes, and seconds
from left to right.
All – All the tracks or files will be played back
repeatedly.
(You can also input the required start time with
the virtual keyboard by pressing ENTER (b).)
All – All the tracks or files will be played
back repeatedly in random order.
– The tracks or files will be played back in
random order.
To return to normal playback, press CLEAR.
,,Note
This function may not work on some disc or title.
For example, to find a scene at 2 hours, 10
minutes, and 20 seconds, enter “21020”.
Press A/D to skip the playback 60 seconds
forward or backward.
4.Press ENTER (b) to start playback from selected
time.
,,Note
yy This function may not work on some disc or
titles.
yy This function may not work depending on the
file type and ability of the DLNA server.
Operating 43
Selecting a subtitle language
eroy
Watching from a different angle
er
1. During playback, press INFO/MENU (m).
2. Select an [Option] using A/D, and press ENTER
(b).
If the disc contains scenes recorded at different
camera angles, you can change to a different camera
angle during playback.
3.Use W/S to select the [Subtitle] option.
1. During playback, press INFO/MENU (m).
4.Use A/D to select desired subtitle language.
By pressing ENTER (b), you can set various
subtitle options.
5. Press BACK (1) to exit the On-Screen display.
,,Note
Some discs allow you to change subtitle
selections only via the disc menu. If this is the
case, press TITLE/POPUP or DISC MENU button
and choose the appropriate subtitle from the
selections on the disc menu.
1. During playback, press INFO/MENU (m).
2. Select an [Option] using A/D, and press ENTER
(b).
3.Use W/S to select the [Audio] option.
4.Use A/D to select desired audio language,
audio track or audio channel.
5. Press BACK (1) to exit the On-Screen display.
,,Note
yy Some discs allow you to change audio
selections only via the disc menu. In this case,
press TITLE/POPUP or DISC MENU button
and choose the appropriate audio from the
selections on the disc menu.
yy Immediately after you have switched sound,
there may be a temporary discrepancy
between the display and actual sound.
yy On BD-ROM disc, the multi audio format
(5.1CH or 7.1CH) is displayed with [MultiCH]
in the on-screen display.
3.Use W/S to select the [Angle] option.
4.Use A/D to select desired angle.
5. Press BACK (1) to exit the On-Screen display.
Changing the TV Aspect Ratio
eoy
You can change the TV aspect ratio setting during
playback.
1. During playback, press INFO/MENU (m).
2. Select an [Option] using A/D, and press ENTER
(b)
3.Use W/S to select the [TV Aspect Ratio]
option.
4.Use A/D to select desired option.
5. Press BACK (1) to exit the On-Screen display.
,,Note
Even if you change the value of the [TV Aspect
Ratio] option in On-Screen display, the [TV
Aspect Ratio] option in the [Settings] menu is
not changed.
4
Operating
Hearing a different audio
eroy
2. Select an [Option] using A/D, and press ENTER
(b).
44 Operating
Changing subtitle Code Page
y
Changing the Picture Mode
eroy
If the subtitle is displayed in broken letter, you can
change the subtitle code page to view the subtitle file
properly.
You can change the [Picture mode] option during
playback.
1. During playback, press INFO/MENU (m).
2. Select an [Option] using A/D, and press ENTER
(b).
2. Select an [Option] using A/D, and press ENTER
(b).
3.Use W/S to select the [Code Page] option.
4.Use A/D to select desired code option.
1. During playback, press INFO/MENU (m).
3.Use W/S to select the [Picture Mode] option.
4.Use A/D to select desired option.
5. Press BACK (1) to exit the On-Screen display.
Setting the [User setting] option
1. During playback, press INFO/MENU (m).
2. Select an [Option] using A/D, and press ENTER
(b).
3.Use W/S to select the [Picture Mode] option.
4.Use A/D to select the [User setting] option,
and press ENTER (b).
4
Operating
5. Press BACK (1) to exit the On-Screen display.
5.Use W/S/A/D to adjust the [Picture Mode]
options.
Select [Default] option then press ENTER (b) to
reset the all video adjustments.
6.Use W/S/A/D to select the [Close] option,
and press ENTER (b) to finish setting.
Operating 45
Viewing content information
y
Changing content list view
yui
The player can display the content information.
On the [SmartShare] menu, you can change the
content list view.
1. Select a file using W/S/A/D.
2. Press INFO/MENU (m) to display the option
menu.
Press red (R) colored button repeatedly.
The file information appears on the screen.
During video playback, you can display the file
information by pressing TITLE/POPUP.
,,Note
The information displayed on the screen may not
correct comparing actual content information.
4
Operating
46 Operating
Selecting a subtitle file
y
If the subtitle file name is different from the video
file name, you need to select the subtitle file on the
[Movie] menu before playing the movie.
1.Use W/S/A/D to select the subtitle file you
wish to play in the [Movie] menu.
2.Press ENTER (b).
Listening to music during slide
show
i
You can display photo files while listening to audio
files.
1. While viewing a photo in full screen, press INFO/
MENU (m) to display the option menu.
2. Select an [Option] using A/D, and press ENTER
(b).
3.Use W/S to select [Music Select] option, and
press ENTER (b) to display the [Music Select]
menu.
4.Use W/S to select a device, and press ENTER
(b).
4
Press ENTER (b) again to deselect the subtitle
file. Selected subtitle file will be displayed when
you play the video file.
Operating
,,Note
yy If you press Z (STOP) during playback, the
subtitle selection is cancelled.
yy This function is not available for playing file
on a server via home network.
Available device may differ depending on the
location of the current photo file.
Photo location
Available Device
Disc, USB
Disc, USB
MTP
MTP
DLNA server
DLNA server
5.Use W/S to select a file or a folder you wish to
play.
Select g and press ENTER (b) to display the
upper directory.
,,Note
When selecting audio file from a server, folder
selection is not available. Only file selection is
available.
6.Use D to select [OK], and press ENTER (b) to
complete music selection.
Operating 47
Playing content to 3D
eroy
This function allows you to convert 2D content to 3D
and to play 3D content in case of file encoded in 3D
also. You can adjust 3D’s depth and distance on the
[3D] option while playing back.
Converting 2D content to 3D
1. During playback, press INFO/MENU (m).
2. Select an [3D], and press ENTER (b).
3.Select
by using W/S/A/D to convert
2D contents to 3D.
Playing file encoded in 3D
Reverting
1. During playback, press INFO/MENU (m).
2. Select an [3D], and press ENTER (b).
3.Select
by using W/S/A/D to revert.
,,Note
yy When you have set to Ultra HD resolution,
if you select the [On] in [3D], the Ultra HD
resolution is automatically changed to the
original resolution.
yy Movie files which is upper 30 fps (frame rate)
may not be converted to 3D.
yy If the subtitle is displayed abnormally, set the
TV’s 3D option to off and the unit’s 3D option
to on.
1. During playback, press INFO/MENU (m).
2. Select an [3D], and press ENTER (b).
3D Setting
1. During playback, press INFO/MENU (m).
2. Select an [3D], and press ENTER (b).
3. Select an [3D Setting], and press ENTER (b).
You can adjust 3D’s depth and distance.
Select [Initialize] option then press ENTER (b) to
reset the all adjustments.
4
Operating
3. Select suitable mode (side by side, top and
bottom) which is same way as file encoded in 3D
by using W/S/A/D.
48 Operating
Advanced Features
Wi-Fi Direct™
To select a server from the device list, files or
folders must be shared by DLNA server from the
connected Wi-Fi Direct™ device.
6. Select [Movie], [Photo] or [Music] using W/S/
A/D, and press ENTER (b).
Connecting to a Wi-Fi Direct™
certified device
yui
This player can play movie, music and photo files
located in a Wi-Fi Direct™ certified device. The Wi-Fi
Direct™ technology make the player to be directely
connected to a Wi-Fi Direct™ certified device without
connecting to a network device such as an access
point.
On Wi-Fi Direct™ certified device
1. Turn on the Wi-Fi Direct™ certified device and
run its Wi-Fi Direct function.
4
2. Run DLNA application on the device.
Operating
3. Select [NETWORK] option in the [Settings] menu
then press ENTER (b).
On your player
4. Select [Wi-Fi Direct] option, and press ENTER
(b).
7. Select a file using W/S/A/D, and press
ENTER (b) to play the file.
,,Note
yy For the purpose of the better transmission,
placing the player from the Wi-Fi Direct™
certified server as close as possible.
yy This unit can connect only 1 device at a time.
Multiple connection is not available.
yy If you try to connect wireless network while a
device is connected by Wi-Fi Direct™ function
, Wi-Fi Direct™ connection will be force
disconnected.
yy If this player and a Wi-Fi Direct™ device are
connected to the different local area network,
Wi-Fi Direct™ connection may not available.
yy If a Wi-Fi Direct™ certified device is not in
Wi-Fi direct standby mode, this product can
not find the device.
5. Select a Wi-Fi Direct™ device on the list using
W/S, and press ENTER (b).
Wi-Fi Direct™ connection will be proceeded.
follow the procedure on the screen.
If you want to rescan available Wi-Fi Direct™
device, Select the [Refresh List] and press ENTER
(b).
yy When you connect a Wi-Fi Direct™ certified
device to your player, PIN network connection
is not supported.
yy This player cannot connect to a Wi-Fi direct™
device which is in Group Owner mode.
Operating 49
Enjoying Miracast™
You can mirror Miracast certified device’s screen and
sound onto TV screen through your player wirelessly.
On Miracast™ certified device
1. Turn on the Miracast certified device and run its
[Miracast] function.
On your player
2.Press HOME (b).
3. Select [Miracast] and press ENTER (b).
Enjoying BD-Live™
e
BD-ROM supporting BD-Live that has a network
extension function allows you to enjoy more
functions such as downloading new movie trailers by
connecting this unit to the internet.
1. Check the network connection and settings (page
16).
2. Insert an USB storage device to the USB port on
the front panel.
An USB storage device is needed to download
bonus content.
3.Press HOME (b), and set the [BD-LIVE
connection] option on the [Settings] menu (page
22).
4. Select a Miracast device on the list using W/S,
and press ENTER (b).
If you want to rescan available Miracast device,
select [Refresh List] and press ENTER (b).
,,Note
yy For the purpose of the better mirroring, place
Miracast certified device from the player as
close as possible.
yy This unit can connect only 1 device at a time.
Multiple connection is not available.
yy While mirroring, Wireless network or Wi-Fi
Direct cannot be used simultaneously.
yy If a Miracast certified device is not in
[Miracast] standby mode, this player cannot
find the device.
4. Insert a BD-ROM with BD-Live.
The operations may differ depending on the disc.
Refer to the manual supplied with the disc.
>>Caution
Do not extract the connected USB device while
content is being downloaded or a Blu-ray disc
is still in the disc tray. Doing so may damage the
connected USB device and BD-Live features may
not operate properly with the damaged USB
device anymore. If the connected USB device
seems damaged from such an action, you can
format the connected USB device from the PC
and reuse it with this player.
,,Note
yy Depending on your wireless network
condition, mirroring may be unstable.
yy Some BD-Live content may be restrictively
accessed in some territories by content
provider’s own decision.
yy While mirroring, the screen may be cut off
depending on your TV’s setting. In this case,
please adjust the display settings on your TV.
yy It may take up to several minutes to load and
start enjoying BD-Live content.
yy For BD-Live, use the USB flash drive / external
HDD formatted in FAT32 only.
4
Operating
Miracast function will be proceeded automatically.
Depending on a disc, the BD-Live function may
not be operated if [BD-LIVE connection] option is
set to [Partially Permitted].
50 Operating
Enjoying web browsing
Types URL manually on the screen or visits web sites
added to Favorite.
1.Press HOME (b).
2. Select the [Internet] in the [My Apps] and press
ENTER (b).
3. Enter search terms in the blank.
,,Note
yy For best service quality, subscribe to an
Internet service of 4.0 Mbps (1.5 Mbps or
faster). Contact the ISP (Internet service
provider) for any problems related to Internet
speed.
yy Internet only works with pre-installed plugins.
yy Internet only plays the following media file
formats: “.jpeg”, “.png”, “.gif”, “.wmv”, “.asf”, “.wma”,
“.mp3”, “.mp4”.
yy Internet is forcibly closed when memory is
insufficient.
yy For the internet, fonts installed on the unit
are used and may not be displayed normally
depending on the content played.
yy Internet does not support file and font
download.
4
a Types in the web address or URL.
Operating
yy Internet is made only for this unit. So it may
have different operation from PC browsers.
b Selects when opening several web browsers.
c Add the current page to favorites.
d Moves to a previously visited website.
Operating 51
LG AV Remote
Using an USB keyboard or mouse
You can control this player with your iPhone or
Android phone via your home network. This player
and your phone must be connected to your wireless
network device such as access point. Visit “Apple
iTunes” or “Google Android Market (Google Play
Store)” for detailed information of “LG AV Remote”.
You can connect an USB keyboard and/or mouse to
type text and navigate menus.
Private Sound Mode
By downloading “LG AV Remote” application on
your smart phone or tablet, you can connect your
headsets, and enjoy the sound from your player on
your smart devices.
This feature transmits video signal to TV through
HDMI and Audio signal to smart phone or tablet
through Wi-Fi. For more detailed information, please
refer to “LG AV Remote” application.
1. Connect an USB keyboard or mouse to the USB
port on the front panel.
2. Use the keyboard to type text, or the mouse to
navigate menus.
,,Note
The following keyboards and mice are
recommended.
-- Logitech Wireless Combo MK520
-- Logitech Wireless Combo MK320
-- Logitech Wireless Combo MK260
-- Microsoft Wireless Desktop 5000
-- Microsoft Wireless Desktop 3000
-- Microsoft Wireless Desktop 2000
-- Microsoft Wireless Desktop 800
4
Operating
52 Operating
Using the Premium
You can use various content services via Internet with
the Premium feature.
1. Check the network connection and settings (page
16).
2.Press HOME (b).
3. Select the [Premium] using A/D, and press
ENTER (b).
Using the LG Smart
World
You can use the LG application services on this player
via Internet. You can easily find and download various
applications from LG Smart World.
1. Check the network connection and settings (page
16).
2.Press HOME (b).
3. Select the [LG Smart World], and press ENTER
(b).
4. Select an online service using W/S/A/D, and
press ENTER (b).
4
,,Note
Operating
yy For detailed information of each service,
contact to the content provider or visit
support link of the service.
yy The content of Premium services and service
related information, including user interface,
is subject to changes. Please refer to the
web site of each service for most up-to-date
information.
yy Using Premium features with wireless
network connection may result in improper
streaming speed by interference from
household devices that are using radio
frequencies.
yy For the first time to access [Premium] or [LG
Smart World] feature, current country setting
appears.
yy If you want to change the country setting, go
to [Settings] > [NETWORK] > [Smart Service
Setting] > [Country Setting]. Select [Manual]
and press ENTER (b) on [Country Setting]
menu.
4. Select a category using A/D, and press ENTER
(b).
5.Use W/S/A/D to select an application, and
press ENTER (b) to display the information.
6. Press ENTER (b) while [Install] icon is
highlighted. The application will be installed to the
player.
To install an application to the player, user
needs to sign in. Refer to page 53 for more
information of signning in.
7. Press red (R) colored button to display the [My
Apps] screen.
8. Select the installed application and press ENTER
(b) to excute it.
,,Note
yy Depending on the region, the [LG Smart
World], [My Apps], [d] and [c] may not be
available.
yy To install a paid application, you need to be
a paid member. Visit www.lgappstv.com for
more information.
Operating 53
Signing in
Searching online content
To use the [LG Smart World] feature, you need to
sign in with your account.
If you are having difficulties finding specific content
from online services, you can use the all-in-one
search function by entering keywords in the search
menu.
1. On the [LG Smart World] or [My Apps] screen,
press red (R) colored button.
2. Fill the [ID] and [Password] field using the virtual
keyboard.
If you do not have an account, press red (R)
colored button to register.
3.Use W/S/A/D to select [OK], and press
ENTER (b) to sign in with your account.
1.Press HOME (b).
2. Select the [d] icon on the home menu using W/
S/A/D, and press ENTER (b).
The search menu appears on the screen.
3. Press ENTER (b). The virtual keyboard appears
automatically.
If you select the [Auto Sign In] check box, your ID
and password are remembered and automatically
signed in without entering them.
4.Use W/S/A/D to select letters then press
ENTER (b) to confirm your selection on the
virtual keyboard.
,,Note
5. When you finish entering the keyword, select
[k] and press ENTER (b) to display search
result.
yy If you want to sign in with other account,
press red (R) colored button on [LG Smart
World] or [My Apps] screen, and select
[Change User] option.
,,Note
yy Depending on the region, the [LG Smart
World], [My Apps], [d] and [c] may not be
available.
yy The search function does not search content
in every online services. It works only in
certain online services.
4
Operating
yy To view the information of your account and
applications, press red (R) colored button on
[LG Apps] or [My Apps] screen, and select
[Account Setting] option.
6.Use W/S/A/D to select a desired content,
and press ENTER (b) to move to the selected
content directly.
54 Operating
Using the My Apps
Menu
You can move or delete an installed application in the
[My Apps] menu.
1.Press HOME (b).
2. Select the [My Apps], and press ENTER (b).
Using Audio Cast
tu
eroy
Using LG smart Hi-Fi audio system MUSIC flow, you
can enjoy contents being played by this unit with high
quality wirelessly.
1. Before using this feature, check if MUSIC
flow speakers are set as external speakers on
[External Speaker] menu. (page 27)
2. Press green (G) colored button for more than 3
seconds. MUSIC flow speakers output the sound
of the contents being played.
Move an application
1. Select an application, and press green (G) colored
button to display the options.
4
2.Use W/S to select [Move], and press ENTER
(b).
Operating
3.Use W/S/A/D to select a position you want
to move to, and press ENTER (b).
Delete an application
1. Select an application, and press green (G) colored
button to display the options.
2.Use W/S to select [Delete], and press
ENTER(b).
3.Use A/D to select [Yes], and press ENTER (b)
to confirm.
,,Note
Depending on the region, the [LG Smart World],
[My Apps], [d] and [c] may not be available.
,,Note
yy If you select [Mute Blu-ray Disc™ Player] in
[External Speaker] menu, you can listen using
only MUSIC flow.
yy If playback doesn’t work smoothly, the
connection may be broken automatically.
yy When you perform private sound mode, this
function is unavailable.
yy If Music flow speakers are turned off or
disconnected from the network connection
while using Audio cast, you should set
external speakers output on [External
Speaker] menu again.
Troubleshooting 55
Troubleshooting
General
Symptom
Cause & Solution
The unit does not work properly.
yy Turn off the power of this unit and the connected external device (TV,
Woofer, DVD-player, Amplifier, etc.) and turn it on again.
yy Disconnect the power cord of this unit and the connected external
device (TV, Woofer, DVD-player, Amplifier, etc.) and then try connecting
again.
The Power does not turned on.
yy Plug the power cord into the wall outlet securely.
The unit does not start playback. yy Insert a playable disc. (Check the disc type, color system, and regional
code.)
yy Place the disc with the playback side down.
yy Place the disc on the disc tray correctly inside the guide.
yy Clean the disc.
yy Cancel the Rating function or change the rating level.
The connected USB storage
device is not recognized.
yy Try using different USB cable, some USB cables may not support
enough current for normal USB operation.
yy If you use an USB extension cable or USB HUB, the USB devices may
not be recognized.
5
yy An USB device which requires additional program installation when you
have connected it to a computer is not supported.
Troubleshooting
yy This unit supports only USB Flash Drive and USB External HDD with
FAT32 or NTFS format.
The angle cannot be changed.
yy Multi-angles are not recorded on the DVD Video being played.
Cannot play movie, photo or
music files.
yy The files are not recorded in a format that the unit can play.
yy The unit does not support the codec of the movie file.
The remote control does not
work properly.
yy The remote control is not pointed at the remote sensor of the unit.
yy The remote control is too far from the unit.
yy There is an obstacle in the path of the remote control and the unit.
yy The batteries in the remote control are exhausted.
The unit is plugged in, but the
power will not turn on or off.
The unit is not operating
normally.
You can reset the unit as follows.
yy Unplug the power cord, wait at least five seconds, and then plug it in
again.
56 Troubleshooting
Network
Symptom
Cause & Solution
BD-Live feature does not work.
yy The connected USB storage may not have enough space. Connect the
USB storage with at least 1GB free space.
yy Ensure that the unit is correctly connected to the local area network
and can access the internet (page 16).
yy Your broadband speed may not fast enough to use the BD-Live features.
Contact your Internet Service Provider (ISP) and increase the broadband
speed is recommended.
yy The [BD-LIVE connection] option in the [Settings] menu is set to
[Prohibited]. Set the option to [Permitted].
Streaming video services are
yy Your broadband service speed may not be fast enough to stream video
often stopped or “buffer” during
services. Contact your Internet Service Provider (ISP) and increase the
playback.
broadband speed is recommended.
Media servers are not displayed
on the device list.
yy The firewall or anti-virus software on your media server is running. Turn
off the firewall or anti-virus software running on your media server.
yy The player is not connected to the local area network that your media
server is connected.
5
Troubleshooting
Cannot connect the player to
the access point or wireless LAN
router.
yy The wireless communication may be interrupted from household devices
that are using radio frequencies. Move the player away from them.
Access point is not displayed on
the “Access point name” list.
yy The access point or wireless LAN router may not broadcast its SSID. Set
your access point to broadcast its SSID through your computer.
yy Your network device such as access point may not set with available
frequency range and channel that this player can support.
Try setting the frequency range and channel on the network device
setting.
Troubleshooting 57
Picture
Symptom
Cause & Solution
There is no picture.
yy Select the appropriate video input mode on the TV so the picture from
the unit appears on the TV screen.
yy Connect the video connection securely.
yy Check the [HDMI Color Setting] in the [Settings] menu is set to the
appropriate item that conforms to your video connection.
yy Your TV may not support the resolution you have set on the player.
Change the resolution that your TV accepts.
yy The player’s HDMI OUT jack is connected to a DVI device that does not
support copyright protection.
Picture noise appears.
yy You are playing a disc recorded in a color system that is different from
your TV.
yy Set the resolution which your TV accepts.
Blu-ray 3D disc playback does
not output 3D views.
yy Connect the player to your TV with HDMI cable (Type A, High Speed
HDMI™ Cable).
yy Your TV may not support “HDMI 3D mandatory format”.
yy The [3D Mode] option in the [Settings] menu is set to [Off].
Set the option to [On].
Customer support
5
You can update the Player using the latest software to enhance the products operation and/or add new
features. To obtain the latest software for this player (if updates have been made), please visit
http://www.lg.com or contact LG Electronics customer care center.
Troubleshooting
Open source software notice
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available
for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing
such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com.
This offer is valid for three (3) years from the date on which you purchased the product.
58 Appendix
Controlling a TV with
the Supplied Remote
Control
You can control your TV using the buttons below.
You can operate your TV with the supplied remote
control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down 1 (TV POWER) button, and
press the manufacturer code for your TV with the
numerical buttons (see the table below).
Manufacturer
Code Number
LG
1(Default), 2
Zenith
1, 3, 4
GoldStar
1, 2
By pressing
You can
Samsung
6, 7
1 (TV POWER)
Turn the TV on or off.
Sony
8, 9
INPUT
Switch the TV’s input source
between the TV and other
input sources.
Hitachi
4
VOL +/–
Adjust the volume of the TV
,,Note
Depending on the unit being connected, you
may not be able to control your TV using some
of the buttons.
6
Setting up the remote to control
your TV
2. Release the 1 (TV POWER) button to complete
setting.
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code. When you replace the batteries
of the remote, the code number you have set may be
reset to the default setting. Set the appropriate code
number again.
Appendix
Appendix 59
Network Software
Update
Network update notification
From time to time, performance improvements
and/or additional features or services may be made
available to units that are connected to a broadband
home network. If there is new software available and
the unit is connected to a broadband home network,
the player will inform you about the update as
follows.
Option 1:
1. The update menu will appear on the screen when
you turn on the player.
2.Use A/D to select a desired option and then
press ENTER (b).
Software update
You can update the player using the latest software
to enhance the products operation and/or add new
features. You can update the software by connecting
the unit directly to the software update server.
,,Note
yy Before updating the software in your player,
remove any disc and USB Device from the
player.
yy Before updating the software in your player,
turn the player off and then turn it back on.
yy During the software update procedure, do
not turn off the player or disconnect AC
power, or do not press any button.
yy If you cancel the update, turn off the power
and turn it on for stable performance.
yy This unit cannot be updated to previous
software version.
1. Check the network connection and settings (page
16).
2. Select [Software] option in the [Settings] menu
then press ENTER (b).
3. Select [Update] option, and press ENTER (b).
Starts the software update.
[Cancel]
Exits the update menu and the
home menu appears.
Option 2:
If the software update is available from the update
server, the “Update” icon appears in the Home menu.
Press blue (B) colored button to start the update
procedure.
6
The player will check for the newest update.
,,Note
yy Pressing ENTER (b) while checking for the
update will end the process.
yy If there is no update available, the Message,
“No update is found.” appears. Press ENTER
(b) to return to the [Home Menu].
Appendix
[OK]
60 Appendix
4. If newer version exists, the message “A new
update was found. The update takes a few
minutes. Do you want to update?” appears.
5. Select [OK] to start update. (Selecting [Cancel]
will end the update.)
6. The player starts downloading the newest update
from the server. (Downloading will takes several
minutes depending on your home network
condition.)
7. To update software the next time, the software
update procedure has to be started from the
beginning again.
>>Caution
Do not turn off the power during the software
update.
,,Note
If the software includes the driver update, disc
tray may open during the process.
8. When update is completed, the power will be
turned off automatically in a few seconds.
9. Turn the power back on. The system now
operates with the new version.
,,Note
6
Appendix
The Software Update function may not
work properly depending on your internet
environment. In this case, you can obtain
the latest software from the authorized LG
Electronics Service Center then update your
player. Refer to “Customer Support” on page
57.
Appendix 61
Additional Information
File requirement
Video files
File
Location
File
Extension
Disc,
USB
“.avi”, “.mpg”, “.mpeg”,
“.mkv”, “.mp4”, “.asf”,
“.wmv”, “.m4v” (DRM
free), “.vob”, “.3gp”, “.mov”,
“.trp”, “.m2t”, “.mpe”, “.m1v”,
“.m2v”, “.wm”, ”.flv”, “.ts”,
“.dat”
MPEG1 SS, H.264/
MPEG-4 AVC, MPEG2
PS, MPEG2 TS, VC-1 SM
(WMV3)
Dolby
Digital,
DTS,
MP3,
WMA,
AAC,
AC3
SubRip (.srt / .txt), SAMI (.smi),
SubStation Alpha (.ssa/.txt),
MicroDVD (.sub/.txt), VobSub
(.sub), SubViewer 1.0 (.sub),
SubViewer 2.0 (.sub/.txt),
TMPlayer (.txt), DVD Subtitle
System (.txt)
“.avi”, “.mpg”, “.mpeg”,
“.mkv”, “.mp4”, “.asf”,
“.wmv”, “.m4v” (DRM
free), “.3gp”, “.mov”, “.mpe”,
“.m1v”, “.m2v”, ”.flv”, “.ts”,
“.dat”
MPEG1 SS, H.264/
MPEG-4 AVC, MPEG2
PS, MPEG2 TS, VC-1 SM
(WMV3)
Dolby
Digital,
DTS,
MP3,
WMA,
AAC,
AC3
SubRip (.srt / .txt), SAMI
(.smi), SubStation Alpha
(.ssa/.txt), MicroDVD (.sub/.
txt), SubViewer 1.0 (.sub),
SubViewer 2.0 (.sub/.txt),
TMPlayer (.txt), DVD Subtitle
System (.txt)
DLNA
Audio
Format
Codec Format
Subtitle
Audio files
File
Location
File
Extension
Sampling Frequency
Bitrate
Note
“mp3”, “.wma”,
“.wav”, “.m4a”
(DRM free),
“.flac”, “.ogg”,
“.aiff”
within 32 - 48 kHz
(WMA), within 16 - 48
kHz (MP3)
within 32 - 192 kbps
(WMA), within 32 320 kbps (MP3)
Some wav files are
not supported on this
player.
DLNA
“mp3”, “.wma”,
“.wav”, “.m4a”
(DRM free),
“.flac”, “.ogg”
within 32 - 48 kHz
(WMA), within 16 - 48
kHz (MP3)
within 32 - 192 kbps
(WMA), within 32 320 kbps (MP3)
Some wav files are
not supported on this
player.
Photo files
File
Location
Disc,
USB,
DLNA
File
Extension
“.jpg”, “.jpeg”,
“.png”, “.gif”,
“.mpo”, “.jps”
Recommended
Size
Less than 4,000 x 3,000 x 24 bit/
pixel
Less than 3,000 x 3,000 x 32 bit/
pixel
Note
Progressive and lossless
compression photo image files are
not supported.
6
Appendix
Disc,
USB
62 Appendix
,,Note
yy The file name is limited to 180 characters.
yy Maximum files/Folder: Less than 2000 (total
number of files and folders)
yy Depending on the size and number of the
files, it may take several minutes to read the
content on the media.
yy This player supports UTF-8 files even it
contains Unicode subtitle content. This player
can not support the pure Unicode subtitle
files.
yy File compatibility may differ depending on the
server.
yy Depending on the types of file or ways of
recording, it may not play back.
yy Because the compatibility on DLNA server are
tested on the DLNA server (SmartShare PC
Software) environment, file requirements and
playback functions may differ depending on
media servers.
yy A disc which was recorded by multi-session
on normal PC is not supported on this player.
yy The file requirements on page 61 are not
always compatible. There may have some
restrictions by file features and media server’s
ability.
yy Playing video subtitle files are only available
on DLNA media server created by SmartShare
PC Software downloaded from website.
yy The files from removable media such as USB
drive, DVD-drive etc. on your media server
may not be shared properly.
yy The total playback time of audio file indicated
on the screen may not correct for VBR files.
6
,,Note
yy A “avi” file which is encoded “WMV 9 codec”
is not supported.
yy HD video files contained on the CD/DVD or
USB 1.0/1.1 may not played properly.
Blu-ray Disc or USB 2.0 are recommended to
play back HD video files.
Appendix
yy This player supports H.264/MPEG-4 AVC
profile Main, High at Level 4.1. A file with
higher level may not be supported.
yy This player does not support files that are
recorded with GMC*1 or Qpel*2.
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter pixel
yy To be playback a video file, video file name
and Subtitle file name must be the same.
yy When you play a video file with a extension
such as “.ts”, “.m2ts”, “.mts”, “.tp”, “.Trp” or “.m2t”,
your player may not support subtitle files.
yy The total playback time of audio file indicated
on the screen may not correct for VBR files.
yy Video / Audio codec compatibility may differ
depending on video file.
AVCHD (Advanced Video Codec
High Definition)
yy This player can playback AVCHD format discs.
These discs are normally recorded and used in
camcorders.
yy The AVCHD format is a high definition digital video
camera format.
yy The MPEG-4 AVC/H.264 format is capable of
compressing images at higher efficiency than that
of the conventional image compressing format.
yy This player can playback AVCHD discs using
“x.v.Color” format.
yy Some AVCHD format discs may not play
depending on the recording condition.
yy AVCHD format discs need to be finalized.
yy “x.v.Color” offers a wider color range than normal
DVD camcorder discs.
Appendix 63
Certain system requirements
Compatibility notes
For high definition video playback:
yy Because BD-ROM is a new format, certain disc,
digital connection and other compatibility issues
are possible. If you experience compatibility
problems, please contact an authorized Customer
Service Center.
yy High definition display that has HDMI input jack.
yy BD-ROM disc with high definition content.
yy HDMI or HDCP capable DVI input on your display
device is required for some content (as specified
by disc authors).
For Dolby® Digital Plus, Dolby TrueHD and DTS-HD
multi-channel audio playback:
yy An amplifier/receiver with a built-in (Dolby Digital,
Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD)
decoder.
yy Main, center, surround speakers and subwoofer as
necessary for chosen format.
yy This unit allows you to enjoy functions such
as picture-in-picture, secondary audio and
Virtual packages, etc., with BD-ROM supporting
BONUSVIEW (BD-ROM version 2 Profile 1 version
1.1). Secondary video and audio can be played
from a disc compatible with the picture-in-picture
function. For the playback method, refer to the
instructions in the disc.
yy Viewing high-definition content and up-converting
standard DVD content may require a HDMIcapable input or HDCP-capable DVI input on your
display device.
yy Some BD-ROM and DVD discs may restrict the use
of some operation commands or features.
yy Dolby TrueHD, Dolby Digital Plus and DTS-HD are
supported with maximum 7.1 channels if you use
HDMI connection for the audio output of the unit.
yy You can use an USB device to store some disc
related information, including downloaded online
content. The disc you are using will control how
long this information is retained.
6
Appendix
64 Appendix
Audio Output Specifications
Jack/Setting Source
OPTICAL (DIGITAL AUDIO OUT)
PCM
DTS Re-encode *3
Auto
Dolby Digital
PCM 2ch
DTS
Dolby Digital
Dolby Digital Plus
PCM 2ch
DTS
Dolby Digital
Dolby TrueHD
PCM 2ch
DTS 2ch
Dolby Digital
DTS
PCM 2ch
DTS
DTS
DTS-HD
PCM 2ch
DTS
DTS
Linear PCM 2ch
PCM 2ch
DTS 2ch
PCM 2ch
Linear PCM 5.1ch
PCM 2ch
DTS
PCM 2ch
Linear PCM 7.1ch
PCM 2ch
DTS
PCM 2ch
Jack/Setting
Source
6
HDMI OUT
PCM
DTS Re-encode *3
Auto *1 *2
Dolby Digital
PCM 2ch
DTS
Dolby Digital
Dolby Digital Plus
PCM 2ch
DTS
Dolby Digital Plus
Dolby TrueHD
PCM 2ch
DTS 2ch
Dolby TrueHD
DTS
PCM 2ch
DTS
DTS
DTS-HD
PCM 2ch
DTS
DTS-HD
Linear PCM 2ch
PCM 2ch
DTS 2ch
Linear PCM 2 ch
Linear PCM 5.1ch
PCM 5.1ch
DTS
Linear PCM 5.1ch
Linear PCM 7.1ch
PCM 7.1ch
DTS
Linear PCM 7.1ch
Appendix
*1 The secondary and interactive audio may not
be included in the output bitstream if [Digital
Output] option is set to [Auto]. (Except LPCM
Codec : the output always include interactive and
secondary audio.)
*2 This player automatically selects the HDMI
audio according to the decoding capability of
the connected HDMI device even though [Digital
Output] option is set to [Auto].
*3 If the [Digital Output] option is set to [DTS reencode], the audio output is limited to 48 kHz
and 5.1Ch. If the [Digital Output] option is set
to [DTS re-encode], the DTS Re-encode audio
is outputted for BD-ROM discs, and the original
audio is outputted for the other discs (like
[Auto]).
yy If the HDMI OUT jack is connected to your TV with
High Speed HDMI™ Cable and Dolby Digital Plus/
Dolby TrueHD is outputted from HDMI OUT jack,
DIGITAL AUDIO OUT jack is limited to “PCM 2ch”
(When the HDMI and DIGITAL AUDIO OUT are
connected simultaneously).
Appendix 65
yy The audio is outputted up to PCM 48 kHz/16 bit
for MP3/WMA file and PCM 44.1kHz/16 bit for
Audio CD during playback.
yy You must select a digital audio output and a
maximum sampling frequency that your Amplifier
(or AV receiver) accepts using [Digital Output] and
[Sampling Freq.] options on the [Settings] menu
(page 26).
yy With digital audio connection (DIGITAL AUDIO
OUT or HDMI OUT), Disc Menu button sounds of
BD-ROM may not be heard if the [Digital Output]
option is set to [Auto].
yy If the audio format of the digital output does not
match the capabilities of your receiver, the receiver
will produce a strong, distorted sound or no sound
at all.
yy Multi-channel Digital Surround Sound via digital
connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
6
Appendix
66 Appendix
Area Code List
Choose an area code from this list.
AreaCode AreaCode AreaCode AreaCode
6
Afghanistan AF Fiji FJ Monaco MC Singapore SG
Argentina AR Finland FI Mongolia MN Slovak Republic SK
Australia AU France FR Morocco MA Slovenia Austria AT Germany DE Nepal NP South Africa ZA
Belgium BE Great Britain GB Netherlands NL South Korea KR
Bhutan BT Greece GR Antilles AN Spain ES
Bolivia BO Greenland GL New Zealand NZ Sri Lanka LK
Brazil BR Hong Kong HK Nigeria NG Sweden SE
Cambodia KH Hungary HU Norway Canada CA India IN Oman Chile CL Indonesia ID Pakistan PK Thailand China CN Israel IL Panama PA Turkey TR
Colombia CO Italy IT Paraguay PY Uganda UG
Congo CG Jamaica JM Philippines PH Ukraine UA
Costa Rica CR Japan JP Poland PL United States US
Croatia HR Kenya KE Portugal PT Uruguay UY
Czech Republic CZ Kuwait KW Romania Denmark DK Libya Ecuador EC Luxembourg LY Russian
LU Federation Appendix
Egypt EG Malaysia El Salvador SV Maldives MY Saudi Arabia MV Senegal Ethiopia ET Mexico MX
SI
NO Switzerland CH
OM Taiwan TW
RO Uzbekistan Vietnam RU Zimbabwe SA
SN
TH
UZ
VN
ZW
Appendix 67
Language Code List
Use this list to input your desired language for the following initial settings: [Disc Audio],
[Disc Subtitle] and [Disc Menu].
LanguageCode
LanguageCode
LanguageCode
LanguageCode
Afar 6565
French 7082
Lithuanian 7684
Sindhi 8368
Afrikaans 6570
Frisian 7089
Macedonian 7775
Singhalese 8373
Albanian 8381
Galician 7176
Malagasy 7771
Slovak 8375
Amharic 6577
Georgian 7565
Malay 7783
Slovenian 8376
Arabic 6582
German 6869
Malayalam 7776
Spanish 6983
Armenian 7289
Greek 6976
Maori 7773
Sudanese 8385
Assamese 6583
Greenlandic 7576
Marathi 7782
Swahili 8387
Aymara 6588
Guarani 7178
Moldavian 7779
Swedish 8386
Azerbaijani 6590
Gujarati 7185
Mongolian 7778
Tagalog 8476
Bashkir 6665
Hausa 7265
Nauru
7865
Tajik 8471
Basque 6985
Hebrew 7387
Nepali 7869
Tamil 8465
Bengali; Bangla 6678
Hindi 7273
Norwegian 7879
Telugu 8469
Bhutani 6890
Hungarian 7285
Oriya 7982
Thai 8472
Bihari 6672
Icelandic 7383
Panjabi 8065
Tonga 8479
Breton 6682
Indonesian 7378
Pashto, Pushto 8083
Turkish 8482
Bulgarian 6671
Interlingua 7365
Persian 7065
Turkmen 8475
Burmese 7789
Irish 7165
Polish 8076
Twi 8487
Byelorussian 6669
Italian 7384
Portuguese 8084
Ukrainian 8575
Chinese 9072
Japanese 7465
Quechua 8185
Urdu 8582
Croatian 7282
Kannada 7578
Rhaeto-Romance 8277
Uzbek 8590
6
Czech 6783
Kashmiri 7583
Rumanian 8279
Vietnamese 8673
Danish 6865
Kazakh 7575
Russian 8285
Volapük 8679
Dutch 7876
Kirghiz 7589
Samoan 8377
Welsh 6789
Appendix
English 6978
Korean 7579
Sanskrit 8365
Wolof 8779
Esperanto 6979
Kurdish 7585
Scots Gaelic 7168
Xhosa 8872
Estonian 6984
Laotian 7679
Serbian 8382
Yiddish 7473
Faroese 7079
Latin 7665
Serbo-Croatian 8372
Yoruba 8979
Fiji 7074
Latvian, Lettish 7686
Shona 8378
Zulu 9085
Finnish 7073
Lingala 7678
68 Appendix
Trademarks and
Licenses
All other trademarks are trademarks of their
respective owners.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS
2.0+Digital Out is a trademark of DTS, Inc. © DTS,
Inc. All Rights Reserved.
Blu-ray Disc™, Blu-ray™, Blu-ray 3D™, BD-Live™,
BONUSVIEW™ and the logos are trademarks of
the Blu-ray Disc Association.
The Wi-Fi CERTIFIED Logo is a certification mark
of the Wi-Fi Alliance.
“DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation.
Java is a trademark of Oracle and/or its affiliates.
6
Appendix
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
“x.v.Color” is a trademark of Sony Corporation.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
The Wi-Fi Protected Setup Mark is a trademark of
the Wi-Fi Alliance.
“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.
Appendix 69
Cinavia Notice
This product uses Cinavia technology to limit the
use of unauthorized copies of some commerciallyproduced film and videos and their soundtracks.
When a prohibited use of an unauthorized copy is
detected, a message will be displayed and playback or
copying will be interrupted.
More information about Cinavia technology is
provided at the Cinavia Online Consumer Information
Center at http://www.cinavia.com. To request
additional information about Cinavia by mail, send
a postcard with your mailing address to: Cinavia
Consumer Information Center, P.O. Box 86851, San
Diego, CA, 92138, USA.
This product incorporates proprietary technology
under license from Verance Corporation and is
protected by U.S. Patent 7,369,677 and other U.S.
and worldwide patents issued and pending as well
as copyright and trade secret protection for certain
aspects of such technology. Cinavia is a trademark of
Verance Corporation. Copyright 2004-2013 Verance
Corporation. All rights reserved by Verance. Reverse
engineering or disassembly is prohibited.
6
Appendix
70 Appendix
Specifications
General
Power requirements
Refer to main label on the rear panel.
Power consumption
16 W
Networked standby
power consumption
0.5 W (If all network ports are activated.)
Dimensions (W x H x D)
Approx. 430 mm x 43.5 mm x 205 mm
Net Weight (Approx.)
1.55 kg
Operating temperature
5 °C - 35 °C
Operating humidity
5 % - 90 %
Outputs
HDMI OUT (video/audio)
19 pin (Type A, HDMI™ Connector)
DIGITAL AUDIO OUT (OPTICAL)
3 V (p-p), Optical jack x 1
System
6
Laser
Semiconductor laser
wavelength
405 nm / 650 nm
Signal system
Standard PAL/NTSC color TV system
LAN port
Ethernet jack x 1, 10BASE-T / 100BASE-TX
Wireless LAN (internal antenna)
Integrated IEEE 802.11n (5 GHz and 2.4 GHz bands) wireless
networking access, compatible with 802.11a/b/g Wi-Fi networks.
Bus Power Supply (USB)
5 V 0 500 mA
Appendix
yy Design and specifications are subject to change without notice.
Appendix 71
Maintenance
Notes on discs
Handling discs
Handling the unit
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally
packed at the factory.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not use
strong solvents such as alcohol, benzine, or thinner,
as these might damage the surface of the unit.
Keeping the exterior surfaces clean
yy Do not use volatile liquids such as insecticide spray
near the unit.
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.
Storing discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Cleaning discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center to out.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in contact
with the unit for a long period of time.
Maintaining the unit
The unit is a high-tech, precision device. If the optical
pick-up lens and disc drive parts are dirty or worn, the
picture quality could be diminished. For details, please
contact your nearest authorized service center.
6
Appendix
72 Appendix
Important Information
Relating to Network
Services
All information, data, documents, communications,
downloads, files, text, images, photographs, graphics,
videos, webcasts, publications, tools, resources,
software, code, programs, applets, widgets,
applications, products and other content (“Content”)
and all services and offerings (“Services”) provided or
made available by or through any third party (each
a “Service Provider”) is the sole responsibility of the
Service Provider from whom it originated.
The availability of and access to Content and
Services furnished by the Service Provider through
the LGE Device are subject to change at any time,
without prior notice, including, but not limited to the
suspension, removal or cessation of all or any part of
the Content or Services.
Should you have any inquiry or problem related
to the Content or Services, you may refer to the
Service Provider’s website for the most up-to-date
information. LGE is neither responsible nor liable for
customer service related to the Content and Services.
Any question or request for service relating to the
Content or Services should be made directly to the
respective Content and Service Providers.
6
Appendix
Please note that LGE is not responsible for any
Content or Services provided by the Service Provider
or any changes to, removal of, or cessation of
such Content or Services and does not warrant or
guaranty the availability of or access to such Content
or Services.
Download PDF