LG | DV276 | LG DV276 Owner’s Manual

DV276-PM_NA2ALL_ENG
DVD PLAYER
OWNER'S MANUAL
MODEL
:
DV276
Before
connecting, operating
please
read this instruction booklet
or
adjusting this product,
carefully and completely.
CAUTION: The
CAUTION
(dripping
RISK OF ELECTRIC SHOCK
DO NOT OPEN
as
vases,
CAUTION
CAUTION: TO REDUCE THE RISK
concerning
the Power Cord
Most
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
apparatus should not be exposed to water
splashing) and no objects filled with liquids, such
should be placed on the apparatus.
or
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
appliances recommend they be placed upon a
dedicated circuit;
That is, a single outlet circuit which powers only that
appliance and has no additional outlets or branch circuits.
Check the specification page of this owner's manual to be
certain.
This
lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation
triangle
point
within
an
is intended to alert the
presence of
important operating
(servicing) instructions in the
accompanying the product.
equilateral
user
to the
and maintenance
OR MOISTURE.
as a
bookcase
Protect the power cord from
equipment
in
a
outlets,
To disconnect power from the mains, pull out the mains cord
plug. When installing the product, ensure that the plug is
easily
or
physical or mechanical abuse,
being twisted, kinked, pinched, closed in a door, or
as
walked upon. Pay particular attention to plugs, wall
and the point where the cord exits the appliance.
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
WARNING: Do not install this
outlets, loose
damaged wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric shock or fire.
Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it,
discontinue use of the appliance, and have the cord replaced
with an exact replacement part by an authorized servicer.
such
literature
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
such
Do not overload wall outlets. Overloaded wall
or
accessible.
confined space
similar unit.
The
CAUTION:
appliance
children
Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
or
is not intended for
infirm persons without
by young
supervision.
use
Young Children should be supervised
they do not play with appliance.
to
ensure
that
Slots and
and to
openings
in the cabinet
reliable
operation
are
of the
provided
product
for ventilation
and to
protect
overheating.
The openings should be never be blocked by placing the
product on a bed, sofa, rug or other similar surface.This
product should not be placed in a built-in installation such as
a bookcase or rack unless proper ventilation is provided or
ensure
it from
the manufacturer's instruction have been adhered to.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS DEFEATED VIEW
DIRECTLY WITH OPTICAL INSTRUMENTS.
CAUTION:
This
To
product employs
ensure
proper
owner's manual
Should the unit
use
a
Laser
of this
System.
product, please
read this
and retain it for future reference.
carefully
require maintenance,
contact
an
authorized
service center.
Performing controls, adjustments, or carrying out procedures
specified herein may result in hazardous
other than those
radiation exposure.
prevent direct exposure to laser
To
beam, do
not
try
to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
2
If the
supplied from a cord extension
portable outlet device, the cord
extension set on electrical portable outlet device
must be positioned so that it is not subject to
splashing or ingress of moisture.
set
appliance
or an
is
electrical
Contents
Introduction..................4-7
Operation..................14-19
AbouttheSymbolDisplay............4
SymbolusedinthisManual..............4
GeneralFeatures.....................14
NotesonDiscs........................4
TypesofPlayableDiscs.................5
RegionalCode........................5
.16
Playing an Audio CD or MP3/WMA file
ProgrammedPlayback................17
.17
RepeatProgrammedTracks
.17
Erasing a Track from Program List
.17
Erasing the Complete Program List
.17
PlayingaDVDVRformatDisc
ViewingaJPEGfile...................18
FrontPanel...........................6
SlideShow........................18
RemoteControl........................7
StillPicture.........................18
RemoteControlOperation..............7
Remote Control Battery Installation
.7
Zoom.............................18
HandlingDiscs......................4
StoringDiscs........................4
CleaningDiscs......................4
MaintenanceandService................4
.
InstallationandSetup.
.
.
.
.
.
.
.
.
.
.
.
.8-13
.
SettingupthePlayer...................8
DVDPlayerConnections................8
Video and Audio Connections to Your TV
Audio Connection to
Optional Equipment
.
.
.
.
.8
.
LANGUAGE.......................11
?MenuLanguage...................11
?
DiscAudio/Subtitle/Menu
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
MovingtoanotherFile................18
Rotatingthepicture..................18
To listen to MP3/WMA music while
watchingpicture....................18
PlayingaDivXMoviefile...............19
Reference..................20-21
.9
.10
Displaying Disc Information on-screen
InitialSettings........................10
GeneralOperation...................10
.
AdditionalFeatures...................15
.11
.20
Controlling other TVs with the remote control
VideoModeSetting.......................20
LanguageCodes.......................21
.
.
.
AreaCodes...........................21
Troubleshooting.......................22
Specifications.........................23
DISPLAY..........................11
?TVAspect.......................11
?DisplayMode.....................11
?ProgressiveScan..................11
?TVOutputSelect...................11
AUDIO...........................12
?
?
DolbyDigital/DTS/MPEG
SampleFreq.(Frequency).
Dynamic Range Control (DRC)
.
?
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.12
.12
.12
?Vocal...........................12
LOCK(ParentalControl)..............12
?Rating..........................12
?Password........................12
?AreaCode.......................13
OTHERS..........................13
?PBC............................13
B.L.E. (Black Level Expansion)
.13
?DivX(R)VOD.....................13
?
.
.
.
.
.
.
3
Introduction
To
ensure proper use of this product, please read this
owner's manual carefully and retain it for future
reference.
This manual
provides
information
on
the
operation
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
and maintenance of your DVD player. Should the unit
require service, contact an authorized service location.
About the
"
"
Symbol Display
may appear on your TV display during
and indicates that the function explained in
operation
this owner's manual is not available
on
that
specific
DVD video disc.
Symbol
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
Used in this Manual
Refer to the information in this
Indicates
special
notes and
operating
contacting
features.
Tip:
Indicates
tips
and hints for
A section whose title has
is applicable only
symbol.
making
of the
following symbols
represented by the
one
to the disc
the task easier.
All discs listed below
DVD and finalized DVD±R/RW
VCD
Video CDs
ACD
Audio CDs
MP3
MP3 files
WMA
WMA files
DivX
DivX files
on
Handling
Discs
?
the unit
original shipping
carton and
packing
factory.
the exterior surfaces clean
Do not
?
use
near
spray
volatile
liquids
such
as
insecticide
the unit.
Do not leave rubber
or plastic products in contact
long period of time. since they
with the unit for
a
leave marks
the surface.
Cleaning
on
the unit
To clean the
Discs
player, use a soft, dry cloth. If the
extremely dirty, use a soft cloth lightly
with a mild detergent solution.
are
moistened
or
Do not touch the
the
disc
playback side of the disc. Hold
edges so that fingerprints do not get
on
the surface. Never stick paper
before
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
Do not
the
the
save
surfaces
Notes
chapter
service technician.
shipping
Please
Keeping
DVD
a
Handling the Unit
When
at the
by
records.
Maintenance and Service
Note:
ALL
vinyl
or
tape
on
the disc.
use
thinner,
strong solvents such
as
these
as
might damage
alcohol, benzine,
the surface of the
unit.
Maintaining
the Unit
The DVD
player is a high-tech, precision device.
optical pick-up lens and disc drive parts are dirty
worn, the picture quality could be diminished.
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
4
If the
or
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
use.
For details, please contact your nearest authorized
service center.
of
Types
Notes
Discs
Playable
on
Copyrights:
It is forbidden
DVD
(8cm/12cmdisc)
Video CD
(VCD/SVCD)
(8cm/12cmdisc)
Audio CD
(8cm/12cmdisc)
In addition, this unit
plays
DVD±R/RW and CD-R/RW,
Dual disc that contains audio titles, DivX, MP3, WMA,
and/or JPEG files.
This indicates
capable
a product feature that is
playing DVD-RW discs
with Video Recording format.
of
recorded
?
protection function developed by Macrovision.
Copy protection signals are recorded on some discs.
When recording and playing the pictures of these
discs picture noise will appear. This product
incorporates copyright protection technology that is
protected by method claims of certain U.S. patents
and other intellectual property rights owned by
Macrovision Corporation and other rights owners. The
use of this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
copy
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
Notes:
?
by law to copy, broadcast, show,
broadcast via cable, play in public, or rent copyrighted
material without permission. This product features the
DEFINITION TELEVISION SETS ARE FULLY
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD±R/RW) disc
itself, some CD-R/RW (or DVD±R/RW) discs may
not be played on the unit.
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 480 OR 576 PROGRESSIVE
Do not
use
SCAN PICTURE PROBLEMS, IT IS
RECOMMENDED THAT THE USER SWITCH THE
shaped
or
CONNECTION TO THE 'STANDARD DEFINITION'
irregularly shaped CDs (e.g., heartoctagonal) since they may result in
malfunctions.
OUTPUT. IF THERE ARE QUESTIONS REGARDING
OUR TV SET COMPATIBILITY WITH THIS MODEL
Regional Code
This unit has
unit. This unit
same as
Notes
?
the
on
480p AND 576p DVD PLAYER, PLEASE CONTACT
regional code printed on the rear of the
can play only DVD discs labelled as the
a
rear
of the unit
Regional
"ALL".
Codes
Most DVD discs have
numbers in it
or
clearly
a
globe
visible
on
number must match your DVD
code or the disc cannot play.
?
OUR CUSTOMER SERVICE CENTER.
with
the
one or more
cover.
This
player's regional
If you try to play a DVD with a different regional
code from your player, the message "Check
Regional
Code" appears
on
the TV
screen.
5
Front Panel
a
b
cde
a
c
POWER
Switches the unit ON
or
OFF.
?
?
track
?
>
or
6
beginning of current chapter
previous chapter or track.
go to the
(SKIP)
Go to the next
a
chapter
disc here.
window
Shows the current status of the unit.
(SKIP)
Returns to the
Tray
d Display
playback.
x (STOP)
Stops playback.
.
Disc
Insert
b? N(PLAY)
Starts
f
or
track.
or
e
Remote Sensor
Point the remote control here.
f
Z (OPEN / CLOSE)
Opens or closes the disc tray.
Remote Control
POWER
Switches DVD
ON
Player
or
OPEN/CLOSE
Opens
SCAN(m/M)
OFF
Search backward
(Z)
and closes the disc tray.
0-9 numerical buttons
Selects numbered
in
options
a
menu.
track number
a
List
Program
mark
or a
Marker Search
on
the
on
the
menu.
TV Control Buttons
POWER: Turns the TV
on or
AV: Selects the TV's
PLAY
off.
Starts
source.
Adjusts
(N)
playback.
STOP
(x)
Stops playback.
PR/CH +/--: Selects TV's channel.
VOL +/--:
forward.
PAUSE/STEP(X)
Pauses playback temporarily/ press
repeatedly for frame-by-frame
playback.
CLEAR
Removes
or
SKIP(./>)
Go to the next chapter or track.
Returns to the beginning of current
chapter or track or go to the
previous chapter or track.
TV's volume.
AUDIO
DVD MENU
Accesses
Selects
DVD disc.
menu on a
TITLE
Displays
Selects
(left/right/up/down)
an option in the menu.
menu
Selects
Displays
the
menu
of
a
subtitle
a
DVD
Accesses
Display.
RETURN
a
language.
camera
if
angle,
SETUP
DISPLAY
Removes the
or an
available.
selection.
Accesses On-Screen
language
ANGLE
ENTER
Confirms
audio
SUBTITLE
title menu, if available.
b / B / v / V
Selects
an
audio channel.
or removes
the
Setup
menu.
MARKER
(O)
Marks any
menu.
video CD
point during playback.
SEARCH
with PBC.
Displays
MARKER SEARCH
menu.
PROGRAM
Enter the program edit mode.
ZOOM
Enlarges
video
image.
REPEAT
Repeat chapter, track, title,
all.
A-B
Repeat sequence
point B.
from
point
A to
RANDOM
Plays
Remote Control
Remote Control
Operation
Point the remote control at the remote
sensor
and
the
rear
of the
control, and insert two batteries
(size AAA) with 3 and # aligned correctly.
remote
AAA AAA
Caution:
Do not mix old and
Battery installation
battery cover on
Detach the
press the buttons.
tracks in random order.
new
batteries and
different types of batteries such
as
never
mix
standard, alkaline,
etc.
7
Installation and
Setting
The
up the
Setup
Video and Audio Connections
Player
nearby TV, VCR, or radio
may be distorted during playback. If this occurs,
position the player away from the TV, VCR, or radio,
or turn off the unit after removing the disc.
picture
DVD
and sound of
a
to Your TV
Make
sure
DVD
Depending on your TV and other equipment there are
various ways you can connect the player. Please refer
to the manuals of your TV, stereo system or other
devices as necessary for additional connection
information.
player
--
Connect the VIDEO OUT
player
to the video in
the video cable
to the
on
jack
on
the TV
the
using
(V).
jack
DVD
the TV
Player
to the S-Video in
the S-Video cable
Audio
jack
on
on
the
using
(S).
right AUDIO OUT
jacks of the DVD player to the audio left and right
IN jacks on the TV using the audio cables (A).
Do not connect the unit's AUDIO OUT jack to the
phone in jack (record deck) of your audio system.
--
Connect the left and
Video
--
corresponding jacks
cable (C).
Progressive
Connect the COMPONENT
Caution:
or
S-Video
jack. (Refer
to page
11.)
jacks
on
the TV
the unit to the
using
an
Y PB PR
Scan
If your television is
a high-definition or "digital
ready" television, you may take advantage of
the DVD player's progressive scan output for
the highest possible video resolution.
?
Set the
?
You must set the TV Output Select option on the
setup menu to use COMPONENT / PROGRESSIVE
on
?
Progressive Scan to "On" on
progressive scan signal.
(Refer to page 11)
menu
8
jack
S-Video: Connect the S-VIDEO OUT
Component
jack
directly
a
/PROGRESSIVE SCAN
SCAN
is connected
VCR, otherwise the DVD image could
be distorted by the copy protection system.
Video
Player Connections
the DVD
TV and not to
the setup
for
Progressive scan does not work with the
analog video connections (yellow VIDEO
jack).
OUT
Audio Connection to
Optional
Equipment
Connect the DVD
player
to your
optional equipment
for audio output.
Rear of DVD
Amplifier equipped with 2-channel analog stereo
or Dolby Pro Logic ll / Pro Logic: Connect the left
and right AUDIO OUT jacks on the DVD player to the
audio left and right IN jacks on your amplifier,
receiver, or stereo system, using the audio cables (A).
Amplifier equipped with 2-channel digital stereo
(PCM) or audio / video receiver equipped with a
multi-channel decoder (Dolby DigitalTM, MPEG 2,
or DTS): Connect one of the DVD Player's DIGITAL
AUDIO OUT jacks (COAXIAL X) to the corresponding
jack on your amplifier. Use an optional digital
(COAXIAL X) audio cable.
player
Digital Multi-channel
digital multi-channel
sound quality. For this
A
sound
connection
provides
you need
multi-channel audio
a
the best
/ video receiver that supports one or more of the
audio formats supported by your DVD player such
X
A
MPEG 2, Dolby
manual and the
as
Digital and DTS. Check the receiver
logos on the front of the receiver.
Notes:
?
If the audio format of the
the
a
digital output
does not match
of your receiver, the receiver
strong, distorted sound or no sound at all.
capabilities
produces
COAXIAL
?
DIGITAL INPUT
AUDIO INPUT
Six Channel
Digital Surround Sound via a digital
only be obtained if your receiver
equipped with a Digital Multi-channel decoder.
connection
Amplifier (Receiver)
can
is
Manufactured under license from
Laboratories.
the double-D
Dolby
"Dolby", "Pro Logic", and
symbol are trademarks of
Dolby Laboratories.
DTS and DTS
of
Digital
Digital Out are trademarks
Systems, Inc.
Theater
9
Disc Information
Displaying
Initial
on-screen
You
can
loaded
1.
display
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see the pages 11 to 13.
various information about the disc
on-screen.
Press DISPLAY to show various
playback
information.
The
type
displayed items differ depending
or playing status.
on
Settings
the disc
To
display
and exit the Menu
Press SETUP to
display
the
:
menu.
SETUP will take you back to initial
A second press of
screen.
To go to the next level :
Press B on the remote control.
To go back to the previous level
Press b on the remote control.
General
2.
You
can
change
Title
select
or
an
--
Operation
1.
Press SETUP. The
2.
Use v / V to select the desired
Setup
menu
appears.
item
select the
(Track)
:
by pressing v / V and
setting by pressing b / B.
Current title
(or track)
(or tracks)
number/total number of titles
Chapter Current chapter number/total number
of chapters
Time
Elapsed playing time
Audio
Selected audio language or channel
--
B to
--
Angle
--
--
alternate
Selected subtitle
Selected
angle/total
number of
angles
3.
If any button is not
screen
10
setting for
setting(s).
pressed
display disappears.
for
a
few seconds, the
on-
then press
shows
screen
the selected item,
Use v / V to select the second desired
then press B to
Note:
option
to the second level. The
the current
--
Subtitle
move
move
as
well
option
as
and
to the third level.
4.
Use v / V to select the desired
setting then press
ENTER to confirm your selection. Some items
require additional steps.
5.
Press SETUP
or
PLAY to exit the
Setup
menu.
Progressive
LANGUAGE
Scan
Scan Video
Progressive
provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for
connection to a TV or a monitor that is compatible
with a progressive scan signal, set Progressive Scan
to On.
To Turn ON
Menu
Language
Select
a
screen
progressive
scan:
Connect component video out of this unit to the
of your TV or monitor, set your TV or monitor to
language
display.
Component Input.
for the
Setup
menu
and then
on-
1. Select
Disc Audio / Subtitle / Menu
2. Select "On"
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
Original
Refers to the
--
was
track
Scan"
on
the DISPLAY
menu
original language
using
the v / V buttons.
3. Press ENTER to confirm your selection.
The confirm menu will appear.
in which
4. When the confirm
recorded.
menu
appears
Cancel is
--
corresponding 4-digit number according to the
language code list on the page 21. If you enter
wrong language code, press CLEAR.
highlighted as default.
to highlight Enter.
buttons
To select another language, press
numeric buttons and then ENTER to enter the
Other
"Progressive
then press B.
Select the
the disc
input
5.
ENTER will set the
Pressing
scan
on
your
InstaliodSeup
screen
Use the b / B
player
to
Progressive
mode.
the
Caution:
setting for progressive scan output is
entered, an image will only be visible on a progressive
scan compatible TV or monitor. If you set Progressive
Once the
DISPLAY
Scan to On in error, you must reset the unit.
First, remove the disc in the DVD Player.
Next, press STOP ( x ) and hold it for five seconds
before releasing it. The video output will be restored
to the standard
be visible
TV
--
16:9
player's
YPbPr
Select when
--
a
Select when
standard 4:3 TV is connected.
picture will once again
analog TV or monitor.
a
TV
Output
Select
options according
a
16:9 wide TV is connected.
When your TV is connected with the
COMPONENT / PROGRESSIVE SCAN jacks
to
--
this DVD
S-Video
Display
and
the TV connection type.
Aspect
4:3
setting,
conventional
Select
Output
Set the
TV
on a
Mode
S-Video
The
Display Mode setting works only
Aspect mode is set to "4:3".
Letterbox
--
on
player.
--
When your TV is connected with the
jack.
when the TV
Displays a wide picture with bands
portions of the screen.
on
the upper and lower
Panscan
on
--
Automatically displays
the entire
screen
the wide
and cuts off the
picture
portions that
do not fit.
11
AUDIO
LOCK
Each DVD disc has
Set the
player 's
(Parental Control)
variety of audio output options.
AUDIO options according to the type
a
of audio system you
use.
Rating
Blocks
playback
of rated DVDs based
contents. Not all discs
Dolby Digital
/ DTS / MPEG
1. Select
Select "Bitstream" if you connect this
DVD player's DIGITAL OUT jack to an amplifier or
Bitstream
other
--
equipment
with
a
Dolby Digital,
DTS
or
MPEG decoder.
PCM
MPEG) Select when
digital stereo amplifier.
Dolby Digital or MPEG will be
(for Dolby Digital
connected to
a
DVDs encoded in
automatically
/
--
two-channel
downmixed to two-channel PCM
Off
not
(for DTS): If you select "Off", the DTS signal
output through the DIGITAL OUT jack.
the LOCK
on
on
their
rated.
menu
then
press B.
2. To
access the LOCK options, you must input the
password you have created. If you have not yet
entered password, you are prompted to do so.
Input a password and press ENTER. Enter it again
and press ENTER to verify. If you make a mistake
before pressing ENTER, press CLEAR.
3. Select
audio.
"Rating"
are
from 1 to 8
rating
a
Rating
is
1-8:
restrictions
using
the v / V buttons.
Rating one (1) has the most
and rating eight (8) is the least
restrictive.
Sample Freq. (Frequency)
Unlock
If your receiver or amplifier is NOT capable of
handling 96 kHz signals, select 48 kHz. When this
choice is made, this unit automatically converts any
96 kHz signals to 48 kHz so your system can decode
them.
If your receiver or amplifier is
kHz signals, select 96 kHz.
capable
of
handling
96
If you select unlock, parental control is not active
and the disc plays in full.
4. Press ENTER to confirm your rating
press SETUP to exit the menu.
Password
You
Check the documentation for your
its capabilities.
amplifier
to
can
enter
verify
2. To make
presentation. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the
quietest ones).
This allows you to listen to a movie at a lower volume
without losing clarity of sound. Set DRC to On for this
effect.
Vocal
only
when
normal stereo sound.
12
a
multi-channel karaoke DVD is
The karaoke channels
on
change password.
on
the LOCK
menu
and then
press B.
Dynamic Range Control (DRC)
playing.
or
1. Select Password
With the DVD format, you can hear a program's
soundtrack in the most accurate and realistic
Set to On
selection, then
the disc mix into
a new
password:
Press ENTER when the "New"
highlighted.
Enter
a new
option is
password using
the
numerical buttons then press ENTER. Enter the
password again
To
change
to
verify.
the
password:
"Change" option is
highlighted. Enter a current password using
Press ENTER when the
the
numbered buttons then press ENTER. Enter a new
password using the numbered buttons then press
ENTER. Enter the password again to verify.
3. Press SETUP to exit the
menu.
If you
forget your password
If you
forget your password,
following steps:
1.
2.
Press SETUP to
Input
the
6-digit
display
DivX(R)
can
you
the
clear it
Setup
using
the
security
code is cleared.
Area Code
Enter the code of the
whose standards
area
used to rate the DVD video disc, based
page 21.
1.
Select "Area Code"
on
the LOCK
on
the list
3.
Select the first character
as
shown
Select
Press ENTER while "Select" is selected and the
"DivX(R)
VOD"
option
and then press B.
videos from DivX
on
or
rent the
VOD service at
download the video onto
then
a
disc for
playback
on
this unit.
Press ENTER to exit.
page
Note:
All the downloaded videos from DivX
v / V buttons.
be
played
back
on
VOD
can
only
InstaliodSeup
this unit.
Press ENTER and select the second character
using
5.
more
1.
registration code will appear.
Use the registration code to purchase
(Rating).
using
VOD service. For
www.divx.com/vod. Follow the instructions and
menu
previous
the DivX
2.
3.
Follow the step 2
on
information, visit www.divx.com/vod.
were
press B.
2.
4.
provide you the DivX VOD (Video On Demand)
registration code that allows you to rent and purchase
videos based
menu.
number "210499" and the
VOD
We
v / V buttons.
Press ENTER to confirm your Area code selection.
OTHERS
PBC
Set
Playback
Control
(PBC)
to On
On: Video CDs with PBC
or
Off.
are
played according
are
played
to
the PBC.
Off: Video CDs with PBC
way
B.L.E.
as
(Black
in the
Level
Expansion)
To select the black level of
preference
On:
same
Audio CDs.
and monitor's
Expanded
playback pictures.
ability.
grey scale.
Off: Standard grey scale.
(0
IRE cut
(7.5
Set your
off)
IRE cut
off)
Note:
The B.L.E. function works NTSC system
only.
13
Operations
General features
Buttons
PAUSE/STEP
(Z)
(X)
Opens
(.
/
>)
closes the disc tray.
or
During playback,
Press X
SKIP
Discs
Operations
OPEN / CLOSE
press X to pause
repeatedly
to
playback.
play Frame-by-Frame.
During playback, press SKIP (. or >) to go to the next
chapter/track or to return to the beginning of the current
chapter/track.
Press SKIP . twice
briefly
to
step back
to the
previous
chapter/track.
SCAN
(m
/
M)
During playback, press SCAN (m
required scan speed.
M) repeatedly
or
to
select the
DVD, DivX disc: 4 steps
Video CD, MP3, WMA, Audio CD: 3 steps
While the
playback is paused, press SCAN (m
repeatedly to play in slow motion (4 steps).
REPEAT
or
M)
(forward only)
press REPEAT repeatedly to select
desired repeat mode.
DVD Video discs: Chapter/Title/Off
During playback,
a
Video CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off
A-B
Press the A-B button
one
at
a
time to select
point B and repeats a sequence
to point B (End point).
ZOOM
from
point
point A and
(Starting point)
a
A
During playback or pause mode, press ZOOM to enlarge
image. (3 steps)
You can move through the zoomed picture using bBvV
the video
buttons. Press CLEAR to exit.
RANDOM
TITLE
During playback or
random playback.
If the current DVD title has
on
DVD MENU
(ANGLE)
the
screen.
The disc
menu
a
menu, the title
Otherwise, the disc
appears
on
the
menu
of DVD disc that contains
angles,
angle.
a
desired
appears
screen.
During playback
camera
menu
may appears.
at different
select
(SUBTITLE)
in stop mode, press RANDOM for
press ANGLE
scenes
recorded
repeatedly
During playback, press SUBTITLE repeatedly
language.
to
to select
a
desired subtitle
(AUDIO)
During playback, press AUDIO repeatedly
language or audio track.
audio
14
to hear
a
different
Notes
?
?
On
general features:
on
Last Scene
Video CD with PBC, you must set PBC to Off
on the setup menu to use the repeat function (See
"PBC" on page 13).
This
If you press SKIP
(>)
off the
(Track) playback,
the
a
during Repeat Chapter
repeat playback cancels.
once
?
Zoom may not work
?
When you are playing a DVD disc that contains
scenes recorded at different camera angles, the
indicator will blink
angle
oprations
possible.
?
as an
DVDs.
on some
the TV
on
indication that
even
if you
remove
from the last disc
remains in memory
the disc from the player or switch
If you load
scene is
player.
scene
scene
memorized, the
a
disc that has the
automatically
scene
recalled.
Note:
during
angle switching is
screen
the
player
does not memorize the
you switch off the
the disc.
player
before
scene
of
commencing
a
disc if
to
play
Screen Saver
previous chapter/track.
in
Stop
the DVD
System Select
at any chosen time
playing
appears when you leave the DVD
mode for about five minutes. If the
screen saver
player
displayed for five minutes,
Player automatically turns itself off.
You must select the appropriate system mode for your
TV system. If "NO dSC" appears in the display
window, press and hold PAUSE/STEP for more than 5
Time Search
Press DISPLAY
The
Screen Saver is
Additional features
1.
Memory
memorizes last
that is viewed. The last
This
If you press . once within 4 seconds after the
chapter/track has started, the playback goes to the
To start
player
on
the disc:
seconds to be able to select
during playback.
(PAL, NTSC,
or
a
system
AUTO).
Press v / V to select the time clock icon and
2.
"-:--:--" appears.
Use numerical buttons to
3.
input
the
required
start
time in hours, minutes, and seconds from left to
right. If you enter the wrong numbers, press
CLEAR to
input
the numbers you entered. Then
remove
the correct numbers.
Press ENTER to confirm.
4.
Playback
starts from the
selected time.
Marker Search
To enter
You
points.
Marker
a
from up to nine memorized
at the
playback
start
can
To enter
desired
point
the TV
screen
a
on
marker, press MARKER
the disc. The Marker icon appears
to enter up to nine
on
briefly. Repeat
markers.
To Recall
or
1.
During
disc
search
menu
2.
3.
Clear
Marked Scene
a
playback,
appears
press SEARCH. The marker
on the screen.
Within 9 seconds, press b / B to select
number that you want to recall or clear.
Press ENTER and
scene.
playback
a
marker
starts from the marked
Or Press CLEAR and the marker number is
erased from the list.
4.
You can play any marker
the marker search menu.
by inputting
its number
on
15
Playing
an
Audio CD
MP3 / WMA disc
or
limited
MP3/WMA file
This unit
can
play
?
Audio CDs
or
MP3/WMA files.
?
Press v / V to select
ENTER and
playback
a
-
-
-
-
Once you insert an MP3/WMA files recorded media
Audio CD, a menu appears on the TV screen.
or
is
player
Sampling frequency: within 8 48 kHz (MP3),
48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32
192kbps (WMA)
The player cannot read an MP3/WMA file that has
a file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
within 32
MP3/ WMA/ Audio CD
with this
compatibility
follows:
as
or
track/file and then press PLAY
starts. You can use variable
playback
?
?
?
functions. Refer to page 14-15.
creates
?
File
an
names
and must
ISO 9660 file system.
should have a maximum of 8 letters
incorporate
an
should not contain
?
They
?
The total number of files
.mp3 or .wma extension.
special letters such as /
?*:"<>letc.
?
When
playing
a
track titles, you
DISPLAY.
file
containing
can see
information such
the information
[ Title, Artist, Album, Year,
Comment
as
by pressing
]
the disc should be
?
This DVD
player requires
discs and
recordings
to
meet certain technical standards in order to
achieve
optimal playback quality. Pre-recorded
automatically set to these standards.
DVDs
are
There
are
many different types of recordable disc
formats
Tips:
?
Press DVD MENU to
?
On
move
to the next page.
DISC with MP3/WMA, JPEG and MOVIE file,
you can switch MUSIC, PHOTO and MOVIE menu.
Press TITLE, and MUSIC, PHOTO or MOVIE word
on
on
less than 650.
ID3 TAG
a
top of the
menu
is
highlighted.
(including CD-R containing MP3 or WMA
files) and these require certain pre-existing
conditions (see above) to ensure compatible
playback.
Customers should note that
required
permission
is
in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
should
owner.
16
always
be
sought
from the
copyright
DVD VR format Disc
Programmed Playback
Playing
a
The program function enables you to store your
favorite tracks from any disc in the player memory.
This unit will
play
A program
1.
Insert
Audio CD
an
or
media. AUDIO CD
2.
using
using
contain 30 tracks.
can
or
MP3/WMA files recorded
MUSIC
Press PROGRAM. The
menu
using
1.
mode, then the
again
to exit the program edit
mark will
E
are
recorded
DVD-recorder.
play DVD-RW disc that are
Recording (VR) format.
recorded
the Video
mark will appear.
E
Note:
Press PROGRAM
a
*This unit will
appears.
DVD-R/RW disc that
the DVD-Video format that have been finalized
Insert
a
menu
appears
disc and close the tray. The DVD-VR
on the TV screen.
disappear.
Video CD: Press PROGRAM while
playback
is
The program menu appears. Press
PROGRAM again to exit the menu.
stopped.
Note:
On
Video CD with PBC, you must set PBC to Off
a
the setup menu to use the
(See "PBC" on page 13).
3.
Select
a
track
2.
the "List" and then press ENTER
the selected track on the "Program" list.
additional tracks
4.
Select the track you want to start
"Program" list.
5.
Press PLAY
or
on
6.
To
resume
playback,
normal
select
a
on
in
the
once.
playback
track
from
programmed
PLAY.
?
?
a
desired repeat mode.
Track: repeats the current track
All: repeats all the tracks on the
Off
(No display):
does not
to the list
menu.
"Program"
play repeatedly.
played
in this
player.
?
Some DVD-VR discs
and
display
Player
are
made with CPRM data
does not
support
by
DVD
these kinds of discs
the "CHECK DISC".
Operation
What is 'CPRM'?
a
copy
only allowing
Tracks
Press REPEAT to select
move
Unfinalized DVD-R/RW discs cannot be
CPRM is
Repeat Programmed
?
?
RECORDER.
the list and then press
on
or
Note:
Playback begins
programmed the tracks.
played
Press DVD MENU to
track then press PLAY
starts.
the
on
ENTER to start.
list have
3.
a
playback
the list.
playing
the order in which you
Playback stops after all of the tracks
"Program"
Press v / V to select
ENTER and
on
place
Repeat to place
to
on
programmed playback
the
protection system (with scramble system)
recording of 'copy once' broadcast
programs. CPRM stands for Content Protection for
Recordable Media.
list.
Note:
If you press > once during
the repeat playback cancels.
Erasing
1.
2.
a
Track from
Track
Repeat
"Program"
playback,
List
Use vVbBto select the track that you wish to
erase from the Program list.
Press CLEAR.
tracks
Erasing
on
the
Repeat step
1-2 to
erase
additional
the list.
Complete Program
List
Use vVbBto select "Clear All", then press ENTER.
Note:
The programs are also cleared when the power is off
or the disc is removed.
17
Viewing
This unit
1.
JPEG files.
play
can
Moving
JPEG file
a
Insert
a
menu
appears
JPEG files
on
recording
the TV
media. The PHOTO
to another File
Press SKIP (. or >) or cursor (b or B) once
during viewing a picture to advance to the next or
previous file.
screen.
Zoom
During watching pictures, press ZOOM to enlarge the
image (3 steps).
You can move through the zoomed picture using bB
video
vVbuttons.
Rotating
the
Press v / V
2.
Press v / V to select
3.
If you want to view a particular file, press
v / V to highlight a file and press ENTER
4.
picture
a folder and then press
ENTER. A list of files in the folder appears.
To return to the PHOTO
pictures,
menu
while
If you
are
previous
a
or
PLAY.
use
watching
v / V buttons to
1.
?
Press DVD MENU to
There
are
(Fast),
>>
Speed options
(Normal) and > (Slow).
Use vVbBto
highlight
select the
you want to
option
.
Then,
use
containing
Press TITLE to
3.
Press v / V to select
4.
Use B to select
highlight
to the next page.
three Slide
to rotate the
picture
watching
the two types of file in
player.
Playback
STOP is
move
a
counter clockwise.
2.
and press ENTER.
?
Insert the disc
the
file list and want to return to the
Folder list,
or
picture
press STOP.
in
clockwise
To listen to MP3/WMA music while
Tips:
?
picture
during showing
display
starts. The
the PHOTO
a
photo
menu.
file.
icon then press ENTER.
playback will continue until
pressed.
Tip:
: >>>
To listen to
only
the desired music while
watching
program the desired tracks from the "MUSIC"
and then proceed as above.
pictures,
use
b / B to
menu
then press
ENTER.
?
On
a
DISC with MP3/WMA, JPEG and MOVIE file,
switch MUSIC, PHOTO and MOVIE menu.
can
you
Press TITLE, and MUSIC, PHOTO
on top of the menu is highlighted.
?
While
the
watching
help menu.
a
picture,
or
MOVIE word
JPEG disc
limited
?
press RETURN to hide
highlight
the
(Slide Show)
2.
?
pixels
and burn another disc.
The total number of files
?
will
now
during
the slide show.
on
the disc should be
go into the PAUSE mode.
To return to the slide show, press PLAY
PAUSE/STEP again.
?
Some discs may be incompatible due to a
different recording format or the condition of disc.
Ensure that all the selected files have the
extensions when
or
press
?
If the files have
rename
?
File
them
names
the files
are
Windows
copying
into the CD
".jpg"
layout.
".jpe" or ".jpeg" extensions, please
".jpg" file.
as
without
able to be read
18
is
less than 650.
Press PAUSE/STEP
player
player
Depending upon the size and the number of
JPEG files, it could take a long time for this unit to
read the disc's contents. If you do not see an onscreen display after several minutes, some of the
2048
then
Still Picture
The
with this
---
press ENTER.
1.
compatibility
follows:
files may be too large
reduce the resolution of
the JPEG files to less than 2M pixels as 2760 x
Slide Show
Use vVbBto
as
by
shown
Explorer.
".jpg"
extension will not be
this DVD
as
JPEG
player.
image
Even
though
files in
Playing
Using
1.
DivX Movie file
a
this DVD
Player
Insert
a
menu
appears
DivX file
you
can
recording
on
the TV
play
DivX disc
DivX file.
as
media. The MOVIE
?
screen.
compatibility
player
is limited
Available resolution size of the DivX file is under
720x576
?
with this
follows:
The file
(W
x
name
H) pixel.
of the DivX subtitle is available
by
56 characters.
?
If there is
impossible
code to express in the DivX
as
mark on the
file, it may be displayed
"
"
_
display.
?
2.
Press v / V to select
folder and then press
ENTER. A list of files in the folder appears.
3.
If you want to view a particular file, press v / V to
highlight a file and press ENTER or PLAY. You can
use
variable
playback
If the number of the
frame is
screen
over
30
per 1 second, this unit may not operate
a
normally.
?
If the video and audio structure of recorded
file is not
functions. Refer to page
interleaved, either video
or
audio is
outputted.
14-15.
?
4.
To return to the MOVIE
menu
during playback,
press STOP.
*
If you
in
are
previous
MPEG4 standard. Some MPEG4 encoders, like
DivX, have this option.
file list and want to return to the
a
Folder list,
use
v / V buttons to
highlight
There
and press ENTER.
?
Press DVD MENU to
?
On
move
to the next page.
Playable
a
top of the
menu
is
highlighted.
?
The disc subtitle may not be displayed properly, if
DivX subtitle is downloaded through the internet.
?
If the disc subtitle setup menu does not have the
DivX subtitle language you are going to play, the
subtitle
language
Notice for
may not be
displaying the
If the subtitle does not
a
displayed properly.
DivX subtitle
display properly, please
follow
the steps below.
1. Press PAUSE/STEP when the subtitle appears.
2.
are
usually
DISC with MP3/WMA, JPEG and MOVIE file,
you can switch MUSIC, PHOTO and MOVIE menu.
Press TITLE, and MUSIC, PHOTO or MOVIE word
on
GMC?
GMC is the acronym for Global Motion
Compensation. It is an encoding tool specified in
Tips:
?
If the file is recorded with GMC, the unit
supports only 1-point of the record level.
different levels of GMC
called
1-point, 2-point,
DivX file
Playable Subtitle format
SubRip(*.srt/*.txt)
SAMI(*.smi)
SubStation Alpha(*.ssa/*.txt)
MicroDVD(*.sub/*.txt)
SubViewer 2.0(*.sub/*.txt)
TMPlayer(*.txt)
Dvd Subtitle System(*.txt)
VobSub (*.sub) b Sub/idx, stream
Playable
Operation
based format.
Codec format
"DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ",
"MP43 ", "3IVX ".
Audio format
Press and hold SUBTITLE for about 3 seconds.
Playable
The
"Dolby Digital ", "DTS ", "PCM ", "MP3 ", "WMA
Sampling frequency: within 8 48 kHz (MP3),
within 32 48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32
192kbps (WMA)
language
code will appear.
Press b / B to select another
the subtitle is
4.
encoding,
3-point GMC.
.avi, .mpg, .mpeg
?
3.
or
Press
language
displayed properly.
PLAY(N)
to continue
playback.
code until
".
-
-
?
-
-
19
Reference
Controlling
other TVs with the
remote control
You
Video Mode
?
can
can
control the sound level,
input
That
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
?
To
The
While
2.
on
down TV POWER button, press the
number buttons to select the manufacturer code
holding
for your TV
(see
the table
until
?
new
Video mode
If
more
them
than
at
one
one
?
code number is listed, try entering
one that works
→
change
MODE2
displayed
quality
procedure
Check whether the video
screen.
improved. If not, repeat the
picture quality is improved.
MODE1
Code numbers of controllable TVs
video mode number selected is
the TV
has
below).
Release TV POWER button.
the video mode, press and hold
during disc playback.
change
DISPLAY about 3 seconds
manufacturer code.
1.
Vertical
means
picture may be
straight lines.
interpolation or De-interlace is
on
not
source, and
power switch of non-LG TVs as well. If your TV is
listed in the table below, set the appropriate
With certain discs, the playback
or Dot Crawl is shown
flickering
control the sound level, input source, and
power switch of your LG TV with the supplied remote
control.
You
Setting
→
above
sequence:
MODE3
→
MODE1
If you turn off the power, the video mode will be
back to initial state (MODE1).
time until you find the
a
with your TV.
Tip:
Manufacturer
Code Number
LG / GoldStar
1
Detailed
Descriptions
MODE1: The
(Default),
2
material
or
source
video
for Video Modes
material of the DVD video
material)
(film
is determined from disc
Zenith
1,3,4
Samsung
6,7
MODE2: Suitable for
Sony
8,9
video based material recorded
Hitachi
4
information.
scan
playing
film based content
by
the
or
progressive
method.
MODE3: Suitable for
comparatively
playing
video based content with
little motion.
Notes:
?
Depending
function
on
your TV, some or all buttons may not
the TV, even after entering the correct
on
manufacturer code.
Note:
The video mode setting only works when the
Progressive Scan mode is set to "On" in the Setup
menu.
?
If you enter a new code number, the code number
previously entered will be erased.
?
When you replace the batteries of the remote, the
code number you have set may be reset to the
default
again.
20
setting.
Set the
appropriate
code number
Language
Codes
Use this list to
input your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
following
initial
settings:
Language
Code
7678
Language
Singhalese
Code
7074
Language
Lingala
Code
6566
Language
Fiji
Code
Abkhazian
Afar
6565
Finnish
7073
Lithuanian
7684
Slovak
8375
Afrikaans
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
Ameharic
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
7686
Sindhi
8368
Zulu
9085
Latvian,
Lettish
8373
8471
8479
Area Codes
Choose
an area
Area
code from this list.
Code
AF
Area
Code
Area
Code
Area
Code
ET
Malaysia
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
Finland
FI
Mexico
MX
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Heard and McDonald Islands HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
HU
Afghanistan
Argentina
AR
Ethiopia
Fiji
Australia
AU
Austria
AT
Belgium
SG
SK
Chile
CL
Hong Kong
Hungary
Switzerland
CH
CN
India
IN
Nigeria
Norway
NG
China
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
KW
Portugal
PT
Uzbekistan
UZ
LY
Romania
RO
Vietnam
VN
LU
Russian Federation
RU
Zimbabwe
ZW
Czech
Republic
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
Egypt
EG
El Salvador
SV
Libya
Luxembourg
UG
21
Troubleshooting
Possible Cause
Symptom
Correction
No power.
?
The power cord is disconnected.
?
the power cord into the wall outlet
Plug
securely.
The power is on, but
the DVD player does
?
No disc is inserted.
?
Insert
in the
disc.
a
display
the disc indicator
window is lit.)
(Check
not work.
No
picture.
?
The TV is not set to receive DVD
?
?
Select the
mode
signal output.
The video cable is not connected
on
appropriate
video
input
the TV.
?
Connect the video cable
?
Select the correct input mode of the
audio receiver so you can listen to the
Turn
securely.
securely.
No sound.
?
The equipment connected with the
audio cable is not set to receive DVD
?
The power of the equipment connected
with the audio cable is turned off.
?
The AUDIO
?
sound from the DVD
signal output.
?
wrong
The DVD
not start
player does
playback.
?
unplayable
22
disc is inserted.
The
?
The remote control is not
rating
the remote
properly.
level is set.
player.
equipment
connected with
the audio cable.
?
sensor on
?
pointed at
player.
specific symptoms
?
the DVD
The remote control is too far from the
DVD
If your
set to the
?
?
to discuss.
are
the
Set the AUDIO option to the correct
position, then turn on the DVD player
again by pressing POWER.
Insert
playable
a
disc.
(Check
the disc
type and regional code.)
The remote control
does not work
An
options
position.
on
player.
do not appear in this
Change
rating
level.
Point the remote control at the remote
sensor
?
the
of the DVD
Operate
the DVD
player.
the remote control closer to
player.
list, please call LG Customer Service
on
1800 643 156
Specifications
AUDIO OUT:
General
Power
Power
requirements:
AC 200-240 V
consumption:
8W
2.0Vrms(1KHz,0dB),600Ω,RCAjack(L,R)x1
50/60 Hz
,
DIGITAL OUT (COAXIAL):
0.5V(p-p),75Ω,RCAjackx1
Dimensions
(Approx.):
430x35x202mm(17x1.4x7.9inches)
(WxHxD)withoutfoot
Net
Weight (Approx.):
1.6
System
Laser:
kg (3.5 lbs)
Semiconductor laser,
Operating temperature:
5°Cto35°C(41°Fto95°F)
Operating humidity:
nm
CD:8Hzto20kHz
VIDEO OUT:
(p-p),
650
Frequency response:
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
5 % to 90 %
Outputs
1.0 V
wavelength
PAL/NTSC
Signal system:
75 Ω, sync
negative,
RCA
jack
x
More than 90 dB
S-VIDEO OUT:
(Y) 1.0 V (p-p), 75 Ω, negative
1(C)0.3V(p-p)75Ω
sync, Mini DIN
ratio:
Signal-to-noise
1
4-pin
(ANALOG
OUT connectors
only)
Harmonic distortion: Less than 0.02%
x
Dynamic range:
More than 95 dB
(DVD/CD)
COMPONENT VIDEO OUT:
(Y) 1.0 V (p-p), 75 Ω,negative sync, RCA jack
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
Note: Design and specifications
are
subject
x
to
1
Accessories:
Video cable
Batteries
change
without
(1),
Audio cable
(1),
Remote control
(1),
(2)
prior
notice.
23
P/NO.
:
MFL36431007
Download PDF

advertising