LG | DP9911P | LG DP9911P Owner’s Manual

Portable DVD
Player
Owner's Manual
Model: DP9911P
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and
completely.
P/NO
:
3834RD0085G
Precautions
Safety
Introducin
do not try to open the
enclosure. Visible laser radiation when open. DO NOT STARE INTO
To
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
:
TO REDUCE THE RISKOF ELECTRIC SHOCK
CAUTION: The
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
flash with arrowhead
lightning
equilateral triangle
symbol
is intended to alert the
presence of uninsulated
dangerous voltage
vases,
within
user
within
within the
equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
an
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this
a
bookcase
or
equipment
in
a
confined space such
as
similar unit.
CAUTION: This
To
ensure
carefully
product employs a Laser System.
proper use of this product, please read
this owner's manual
and retain it for future reference. Should the unit
require
maintenance, contact an authorized service center.
Performing controls, adjustments, or carrying out procedures other
than those
exposure.
specified
herein may result in hazardous radiation
not be
exposed to water
objects filled with liquids,
or
such
as
AND INTERLOCKS DEFEATED.
to the
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
point
apparatus should
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN
an
product's
The exclamation
beam,
splashing) and no
should be placed on the apparatus.
(dripping
NO USER-SERVICEABLE PARTS INSIDE
This
exposure to laser
BEAM.
DO NOT REMOVE COVER (OR BACK)
2
prevent direct
NOTES ON COPYRIGHTS:
It is forbidden
play in
This
by law to copy, broadcast, show, broadcast via cable,
public, or rent copyrighted material without permission.
protection function developed by
Macrovision. Copy protection signals are recorded on some discs.
When recording and playing the pictures of these discs on a VCR,
picture noise will appear.
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection technology must be
authorized by Macrovision Corporation, and is intended for home and
other limited viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disassembly is
prohibited.
product
features the copy
Safety
Precautions
CAUTION
Most
concerning the Power Cord
appliances recommend they be placed
(Continued)
circuit;
That is,
upon
a
dedicated
appliance
children
single outlet circuit which powers only that appliance and
has no additional outlets or branch circuits. Check the specification
page of this owner's manual to be certain.
or
is not intended for
by young
supervision.
use
infirm persons without
a
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged
or cracked wire insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically examine the cord of
your appliance, and if its appearance indicates damage or deteriora-
tion, unplug it,
discontinue
appliance, and have the cord replaced with an
exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and the point where the
cord exits the appliance.
use
CAUTION: The
of the
apparatus should
not be
exposed
splashing) and no objects filled
should be placed on the apparatus.
(dripping
vases,
The
or
with
SERIAL NUMBER: The serial number is found
unit. This number is for this unit
only.
Serial No.
on
liquids,
such
as
the back of this
You should record the serial
number in the space provided and retain this
record of your purchase.
Model No.
to water
guide
as a
permanent
Young Children should be supervised to
that they do not play with appliance.
If the
ensure
supplied from a cord extension
set or an electrical portable outlet device, the cord
extension set on electrical portable outlet device
must be positioned so that it is not subject to
splashing or ingress of moisture.
appliance
is
Introducin
3
Before Use
Introducin
4
To
ensure
manual
proper
carefully
use
of this
product, please read this owner's
and retain for future reference.
contact
provides information on the operation and mainof your DVD player. Should the unit require service,
an
"
"
display during operation and
indicates that the function explained in this owner's manual is
not available on that specific DVD video disc.
on
your LCD
authorized service location.
Notes
Used in this Manual
Symbol
Symbol Display
may appear
This manual
tenance
About the
Discs
on
Handling
Discs
Do not touch the
NOTE
Indicates
special
notes and
operating features.
the
edges
so
playback side of the disc. Hold the disc by
that fingerprints do not get on the surface.
Never stick paper
or
tape
on
the disc.
TIP
Indicates tips and hints for making the task easier.
A section whose title has one of the following symbols is
applicable only to the disc represented by the symbol.
DVD
DVD discs
VCD
Video CDs
CD
Audio CDs
MP3
MP3 discs
WMA
WMA discs
JPEG
JPEG discs
Storing Discs
After playing, store the disc in its case. Do not expose the
disc to direct sunlight or sources of heat and never leave it
a parked car exposed to direct sunlight.
Cleaning Discs
Fingerprints and dust on
ity and sound distortion.
the disc
Before
can cause
playing,
poor
in
picture qual-
clean the disc with
clean cloth. Wipe the disc from the center out.
a
Before Use
Types
of
Playable
Discs
NOTES
DVD
?
(8cm/12cmdisc)
Audio CD
(8cm/12cmdisc)
In
addition, this
plays DVD±R, DVD±RW, VCD, SVCD, and
contains audio titles, MP3, WMA or JPEG
unit
CD-R or CD-RWthat
Depending
the conditions of the
recording equipment or
the CD-R/RW (or DVD±R/±RW) disc itself, some CD-R/RW (or
DVD±R/±RW) discs cannot be played on the unit.
on
?
Do not attach any seal or label to either side (the labeled
side or the recorded side) of a disc.
?
Do not
files.
irregularly shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
Notes
use
on
DVDs and Video CDs
Some
Manufactured under license from
"Dolby",
marks of
"Pro
Logic", and the
Dolby Laboratories.
Dolby
double-D
playback operations of DVDs and Video CDs may be
intentionally programmed by software manufacturers. This
unit plays DVDs and Video CDs according to disc content
designed by the software manufacturer, therefore some play-
Laboratories.
symbol
are
trade-
back features may not be available
be added.
Regional
or
other functions may
code
This DVD player is
designed
and manufactured for
playback of region "4" encoded DVD software. This
unit can play only DVD discs labeled "4" or "ALL".
Notes
?
on
Regional Codes
Most DVD discs have
a
clearly visible on the
DVD player's regional
?
If you try to
your
the
4
player,
screen.
play
a
globe
with
one or more
numbers in it
This number must match your
code or the disc cannot play.
cover.
DVD with
the message
region code from
"Check Regional Code" appears on
a
different
Introducin
5
Table of Contents
Introducin
6
Introduction
?MarkerSearch........................24
SafetyPrecautions..........................2-3
?Repeat.............................24
?RepeatA-B..........................25
SymbolusedinthisManual...................4
AbouttheSymbolDisplay.................4
?Zoom..............................25
BeforeUse...............................6-5
NotesonDiscs............................4
TypesofPlayableDiscs......................5
TableofContents............................6
IdentificationofControls....................7-10
MainUnit.............................7-8
RemoteControl.........................9-10
Before Use
PowerConnection.........................11-14
ACAdapter..............................11
AutomotiveAdapter........................12
BatteryPack...........................13-14
Audio/videoConnection.....................15-16
InitialSettings..........................17-22
GeneralOperation.........................17
LANGUAGE..............................17
DISPLAY...............................18
AUDIO................................19
LOCK(ParentalControl)...................20-21
OTHERS................................22
Operation
GeneralFeature...........................23-25
On-ScreenDisplay.........................23
.23
?Moving to another CHAPTER/TRACK
.
.
.
.
.
.
.
.
.
?SlowMotion..........................23
?TitleMenu...........................23
?DiscMenu...........................23
.23
?ChangingtheAudioLanguage.
?Search..............................24
?
Still Picture and Frame-by-Frame Playback
.24
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?CameraAngle........................25
?Subtitles............................25
.25
?ChangingtheAudiochannel.
.
.
.
.
.
.
.
.
.
.
.
.
?LastSceneMemory.....................25
?ScreenSaver.........................25
.26-27
Playing an Audio CD and MP3/WMA Disc
AudioCDandMP3/WMADiscFeatures
.27
?Pause..............................27
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?MovingtoanotherTrack.................27
?RepeatTrack/All/Normal................27
?RepeatA-B..........................27
?Search.............................27
ViewingaJPEGdisc.........................28
Using this DVD Player you can view discs
withJPEGfiles...........................28
?MovingtoanotherFile..................28
?Torotatepicture......................28
?StillPicture..........................28
?Zoom..............................28
JPEG compatibility with this player is
limitedasfollows........................28
ProgrammedPlayback........................29
.29
?ErasingaTrackfromprogramlist.
.
.
.
.
.
.
.
.
.
Reference
MaintenanceandService......................30
LanguageCodeList..........................31
AreaCodeList.............................32
Troubleshooting............................33
Specifications.............................34
Identification of Controls
Main Unit
1.
LCD
2.
Speaker
3.
?
screen
MODE button: Selects the mode of LCD adjustment
Brightness
4.
1
5.
and
?
-
?
ANGLE
?
SETUP
?
TITLE
?
MENU
?
+
6.
?
?
3
?
5
Selects
a
Accesses
7.
OFF
Adjusts
the selected mode.
DVD camera
or removes
angle
setup
if available
menu.
title menu, if available.
Accesses menu on a DVD disc.
:
bBvV(left/right/up/down)
item in the
an
menu.
ENTER
Confirms
2
4
buttons
→
Displays
:
Selects
?
Color
:
:
:
→
PLAY
(
menu
N
PAUSE ( X
STOP ( x )
selection.
): Starts playback.
): Pauses playback temporarily/
:
press
repeatedly for frame-by-frame playback.
Stops playback.
Disc Lid
8. OPEN button
Push this button to open the Disc lid.
6
NOTE
Place
7
8
a
disc with the
push gently
on
playback side
down
the center of the disc
so
on
the
it goes
spindle, and
into position.
Introducin
7
Identification of Controls
Introducin
(Continued)
Main Unit
8
123456
8
910
7
1. Volume Control
2.
7.
-
Earphone jack
3. AUDIO In/Out
4. VIDEO In/Out
jack (OPTICAL OUT)
jack
Switch to AV IN to input the external AV
sources; switch to DVD to play the disc.
5. AV IN/DVD
Power ON/OFF
Switches the power on or off.
If the POWER switch on the main unit is off, the remote
control is not available.
8. Remote
sensor
Receive the
:
9.
signal
Battery charge
Light
If the VIDEO IN signal is not connected in AV IN mode, this
green when the
automatically power off in
battery discharge.
6. DC 9.5V IN
Connect the AC adapter.
10 minutes to prevent
from the remote control for operation.
indicator
turns red when the
NOTE
unit will
:
battery is in charging;
battery is fully charged.
turns
10.Main unit Power indicator
Light
turns green when the unit is under
operation.
Identification of Controls
(Continued)
1. AUDIO
Remote
Selects
Control
2.
3.
1
AUDIO
SUBTITLE
11
SKIP/SEARCH
?
SLOW
12
3
PLAY
PAUSE
ZOOM
MENU
DISPLAY
*
13
STOP
45
TITLE
6
14
15
4.
MARKER
ENTER
SETUP
1
SEARCH
RETURN
23
REPEAT
PROG
17
56
89
playback.
back.
20
6. MENU
Accesses
CLEAR
menu on a
DVD disc.
21
bBvV(left/right/up/down)
Selects
?
an
item in the
menu.
ENTER
Confirms
8. SETUP
Accesses
Repeat sequence.
12.SLOW(, /.)
9
Reverse/ Forward slow playback.
13.STOP ( x )
Stops playback.
14.ZOOM
Enlarges
video
image.
15.TITLE
title menu, if available.
16.DISPLAY
Accesses On-Screen display.
Displays
MARKER
?
Marks any point during playback.
SEARCH
Displays MARKER SEARCH menu.
18.REPEAT
0
?
Introducin
language.
11.A-B
17.?
PAUSE
Pauses
19
7.
7
PLAY
playback temporarily/ press
repeatedly for frame-by-frame play-
18
9
4
5.
language (DVD).
Reverse SKIP/SEARCH ( S )
Search backward*/ go to beginning
of current chapter or track or go to
previous chapter or track.
Forward SKIP/SEARCH ( T )
Search forward*/ go to next chapter
or track.
Press and hold button for about
two seconds.
Starts
16
7
8
?
A-B
2
audio
POWER
Switches DVD Player ON and OFF.
10
POWER
an
10.SUBTITLE
Selects a subtitle
menu
setup
9. 0-9 number buttons
Selects numbered items in
19.RETURN
Removes the setup menu,
video CD with PBC.
20.PROG.
Places
selection.
or removes
Repeat chapter, track, title all.
menu.
a menu.
a
21.CLEAR
Removes
track
on
displays
the program list.
track number on the
program list or a mark on the
MARKER SEARCH menu.
a
the
Identification of Controls
Introducin
Insert the
(Continued)
Button-type battery (Lithium battery)
1. Pinch the battery holder clip together then pull the tab to
remove the battery holder.
2. Insert the battery with the + facing in the same direction
as the + on the battery holder.
3. Replace the battery holder with battery into the remote
control unit making sure that it is fully inserted.
battery (Lithium battery)
10
Replace
?
remote control unit
cells such
Do not expose the remote control sensor to bright light.
Do not place obstacles between the remote control sensor
?
?
and the remote control.
V
Replacing
The
the
button-type battery
battery normally lasts
tery if the
for about
remote control fails to
within the operation range.
a
year.
Replace the bat-
operate the unit when used
CR. 2025
or
its
3V micro lithium
Dispose of battery safety in accordance with local laws. Do
not dispose of in fire.
?
NOTES
as
battery with
equivalent.
Warning : The battery used
or
in this device may present a fire
chemical burn hazard if mistreated. Do not recharge, dis-
assemble, incinerate, or heat above 100 °C (212 °F).
Replace the battery with Matsushita Elec. Ind. Co., Ltd.
(Panasonic), part no. CR. 2025 only.
Use of another battery may present a risk of fire or explosion. Dispose of used batteries. Keep batteries away from
children. Do not disassemble or dispose of in fire.
Power Connection
Follow steps 1 to 3 to connect.
When disconnecting, reverse the order.
AC
Adapter
BeforUse
11
Caution
?
?
?
AC adapter
Do not connect the power plug to a power outlet other
than that indicated on the label, as this can result in a
?
risk of fire
?M anufactured
or
electric shock.
Do not connect
hands.
Doing
Do not
use an
can cause a
so
disconnect the power plug with wet
may cause electric shock.
fire
?
or
AC adapter other than
or
damage
to the
one
player.
specified,
as
This AC adapter operates
?M ODEL NO. : DP-AC90
Contact
it
100-240V~1.5A 50-60Hz.
by WANLIDA Digital Technology Co.,
Ltd.
electrical parts distributor for assistance in
a suitable AC plug adapter or AC cord set.
an
selecting
on
Power Connection
Automotive
Adapter
(Continued)
This DVD player and its automotive
adapter are designed for use
in vehicles that have 12
electrical systems. (This is standard for most vehicles.) If your vehicle has
electrical system, the DC power system cannot be used.
ground
a
volt, negative
different type of
Cigarette lighter socket
BeforUse
2
1
Follow steps 1 to 2 to connect.
When disconnecting, reverse the order.
12
Caution
?T
o
prevent electrical shock and possible damage to your
DVD player
remove
the
or
plug
4 amp. 250V fuse for
automotive adapter.
?
Examples include:
you
from your DVD player.
?A
?
damaged.
the automotive
vehicle, always unplug
adapter from the cigarette lighter socket before
?
Do not leave your DVD player in a place where the temperature exceeds 70°C (158°F), or the pick-up device may be
?
protection is installed
-
with the windows closed and in direct
a car
sunshine.
in the
engine is being started, disconnect the
automotive adapter from the car's cigarette lighter socket.
Do not operate your DVD player when the car battery is
discharged. Peak current from the car generator may cause
Inside
-
Near
a
heating appliance.
While the
Automotive
?
adapter
This automotive adapter operates
?M ODEL NO.
:
?M anufactured
If the vehicle's
?
10
Contact
an
selecting
a
DC 12V.
DPB-C90
the DC fuse to blow.
supply voltage drops below approximately
volts, your DVD player may not work properly.
on
by WANLIDA Digital Technology Co.,
Ltd.
electrical parts distributor for assistance in
suitable automotive adapter.
Power Connection
(Continued)
Battery
Pack
You
to
?
A
1.
2.
can use
enjoy
Charge
the DPB-BS930
rechargeable battery pack (supplied)
player when
AC outlet is not available.
the
the
Attaching
an
battery pack before using it
NOTES:
?
Do not detach the
?
Be careful not to
for the first time.
the
battery pack (supplied)
Match the hooks of the battery pack into the holes on the
bottom of the player.
Press and slide the battery pack to the left until the hooks
Detaching
A
the
battery pack during playback.
drop the battery pack.
battery pack
1. Press the RELEASE knob.
2. Slide the
battery pack to
the
right
until the hooks click.
click.
BeforUse
13
2
1
RELEASE knob
2
1
Hooks
ATTENTION
The
product that
you have
purchased
contains
a
rechargeable battery.
The
battery is recyclable. At
illegal to dispose of this
the end of it's useful life, under various state and local laws, it may be
battery into the municipal waste stream. Check with your local solid waste/officials for details in
your
area
for recycling options
or
proper
disposal.
Power Connection
A
1.
2.
Charging
(Continued)
the
battery pack
Attach the battery pack to the player.
Connect the AC adapter to the player and then plug
A
into
Recharging
Battery
an
14
AC adapter cord insert
Charge
charging starts, the charge indicator lights up
When recharging is complete, the indicator turns up
in red.
4. Disconnect the AC adapter from the
screen
player
after charging.
enough battery,
""
and
3.5 hours*
Brightness control
using the headphones.
at
room
is set to minimum.
temperature (25°C)
pull
flashes
times shown above
depend
?When the power is ON, you cannot
?
the
on
operating
con-
charge
the
battery.
out the
on
Recharging
ditions.
in
green.
LCD
Approx.
NOTES:
When
A If there is not
Approx.
indicator
?
plug
LCD On
When
-
jack (DC IN 9.5V)
from the AC outlet
Play time (DVD-VIDEO)
3.5 hours
-
3.
times
with player
Pack
*
BeforUse
play
Recharging
AC outlet.
Player
and
Charge
the
battery at
a
temperature of +5°C (+41°F) to
+35°C (+95°F).
The
charging time may vary, depending
surrounding temperature.
?The
on
the
battery will not be charged when it is naturally
purposely discharged. Because the unit cannot
perceive battery voltage, even if you attached the
battery.
or
When you are in this situation, power on the unit and
then power off again. Then battery charging will
proceed.
Audio/Video Connection
The picture and sound of a nearby TV, VCR, or radio may be
distorted during playback. If this occurs, position the player
away from the
TV, VCR,
or
radio,
or
turn off the unit after
removing the disc.
Player Connections
DVD
Depending
ways you
on
can
BeforUse
your TV and other equipment there are various
connect the player. Please refer to the manuals
of your TV, stereo system or other devices
additional connection information.
as
necessary for
Video and Audio Connections to Your TV
Make
sure
the DVD player is connected
15
directly to
the TV and
VCR, otherwise the DVD image could be distorted by
the copy protection system.
not to
a
Video:
Connect the VIDEO jack
jack on the
on
the DVD player to the video in
TV using the video cable.
Audio Connection to Your TV:
Connect the AUDIO jacks of the DVD Player to the audio left
and
right
IN jacks
on
the TV using the audio cables. Do not
connect the DVD Player's AUDIO OUT jack to the
phone
in jack
(record deck) of your audio system.
You must set the AV IN/DVD switch to the "DVD" mode
Audio/Video Connection
Audio Connection to
Connect the
Optional Equipment
DVD player to your optional equipment
for audio
output.
You must set the AV IN/DVD switch to the "DVD" mode
Amplifier equipped with 2-channel analog stereo or Dolby
Pro Logic ll / Pro Logic: Connect the AUDIO OUT jacks on
the DVD player to the audio left and right IN jacks on your
amplifier, receiver, or stereo system, using the audio cables.
Amplifier equipped
with 2-channel
digital
(PCM)
stereo
or
audio / video receiver
BeforUse
OPTICAL
R
DIGITAL INPUT
L
AUDIO INPUT
equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2, or DTS): Connect one of
the DVD Player's DIGITAL AUDIO OUT jack to the corresponding
in jack on your amplifier. Use an optional digital audio cable.
Digital Multi-channel sound
A digital multi-channel connection provides the best sound
quality. For this you need a multi-channel audio / video
16
receiver that supports one or more of the audio formats supported by your DVD player such as MPEG 2, Dolby Digital and
DTS. Check the receiver manual and the
OR
logos
on
the front of
the receiver.
NOTES
?
If the audio format of the
digital output
capabilities of your receiver, the
distorted sound
?
Six Channel
or no
Digital
receiver produces
only be obtained if your receiver is
Digital Multi-channel decoder.
?To
see
a
digital connection
equipped with a
a
the audio format of the current DVD in the
display,
press AUDIO.
strong,
sound at all.
Surround Sound via
can
does not match the
on-screen
Initial
Setting
By using the Setup menu, you can make various adjustments
to items such as picture and sound. You can also set a
language for the subtitles and the Setup menu, among other
things. For details on each Setup menu item, see pages 17
LANGUAGE
LANGUAGE
Menu
to 22.
To
display
display the
Original
Disc Subtitle
Off
Disc Menu
Original
Move
screen.
To go to the next level:
Press B on the remote control.
To go back to the previous level:
Press b on the remote control.
2.
Use b / B to select the desired
move
menu
appears.
a
language
Original:
option then press
to the second level. The
setting for the selected item,
setting(s).
current
as
Use v / V to select the second desired
move
Select
for the
language
you
was
shows the
screen
well
V or
as
B
to the third level.
4.
Use v / V to select the desired
setting then press ENTER to
confirm your selection. Some items require additional steps.
5.
Press
SETUP, RETURN or PLAY to exit the Setup
menu.
menu
Exit
and
on-screen
display.
BeforUse
17
DVD
prefer for the audio track (disc
menu.
original language
in which the disc
recorded.
Other: To select another
alternate
option then press
Refers to the
Select
Setup
audio), subtitles, and the disc
Press SETUP. The
ENTER to
Language
Disc Audio / Subtitle / Menu
Operation
Setup
Menu
Select the
1.
to
Disc Audio
A second press of SETUP
menu.
will take you back to initial
3.
English
and exit the Menu:
Press SETUP to
General
Language
language, press number buttons then
Press ENTER to enter the corresponding 4-digit number according
to the language code list in the reference chapter. If you enter
the wrong language code, press CLEAR.
Initial
Setting (Continued)
DISPLAY
DISPLAY
TV
Aspect
Display
BeforUse
18
4:3
Letterbox
Mode
Move
TV
Aspect
Exit
DVD
4:3: Select when
a
16:9: Select when
Display
Select
Mode
standard 4:3 TV is connected.
a
16:9 wide TV is connected.
DVD
Display Mode setting works only when
set to "4:3".
the TV Aspect mode is
LetterBox: Displays a wide picture with bands
and lower portions of the screen.
Panscan:
screen
on
the upper
the wide picture on the entire
and cuts off the portions that do not fit.
Automatically displays
Initial
Setting (Continued)
AUDIO
Sample Freq. (Frequency)
Each DVD disc has
variety of audio output options. Set the
player's AUDIO options according to the type of audio system
you
a
use.
If your receiver
DVD
amplifier is NOT capable of handling 96 KHz
signals, select 48 KHz. When this choice is made, this unit
automatically converts any 96 KHz signals to 48 KHz so your
or
system can decode them.
AUDIO
Dolby Digital
Bitstream
DTS
Bitstream
MPEG
PCM
Sample Freq.
48KHz
DRC
Off
Move
If your receiver
amplifier is capable of handling 96 KHz signals, select 96 KHz. When this choice is made, this unit
passes each type of signal through without any further
processing.
Select
or
Exit
Check the documentation for your
amplifier to verify its
capabilities.
Dolby Digital
/ DTS / MPEG
Bitstream: Select "Bitstream" if you connect the DVD
Player's DIGITAL OUT jack to an amplifier or other equipment with
a
Dolby Digital,
DTS
or
MPEG decoder.
or
MPEG will be
automatically downmixed
two-channel PCM audio.
DTS): If you select "Off", the DTS signal
output through the DIGITAL OUT jack.
Off (for
is not
to
Range Control)
DVD
With the DVD format, you can hear a program's soundtrack in
the most accurate and realistic presentation possible, thanks
to
digital
audio
compress the
PCM (for Dolby Digital / MPEG): Select when connected
to a two-channel digital stereo amplifier. DVDs encoded in
Dolby Digital
19
DRC (Dynamic
DVD
technology. However, you may wish to
dynamic range of the audio output
(the difference between the loudest sounds and the quietest
ones). This allows you to listen to a movie at a lower volume
without
BeforUse
losing clarity
of sound. Set DRC to On for this effect.
Initial
Setting (Continued)
LOCK (Parental
NOTE
Control)
If you set
LOCK
Rating
Unlock
Password
NEW
Area code
US
rating for the player, all disc
played. Higher rated scenes are
lower
are
scene
is available
a
lower one. If
You must
to
BeforUse
20
Move
Rating
Select
children to view.
that may not be suitable for
of these discs contain parental control
the disc. Movies and
complete disc
or
an
the disc. The alternative must have the
or
alternate
same
rating
or
in order
on
the LOCK menu then press B.
most restrictions and
rating
rating from 1 to 8 using the v / V buttons and
The password widow will appear.
press
3. If you have not entered password yet:
When the "New Password" section is highlighted, enter a
4-digit password using the numbered buttons then press
ENTER. Enter the 4-digit security password again to verify
when the "Confirm Password" section is highlighted. The "OK"
will be highlighted.
If you have entered password already:
Enter a 4-digit password you have entered using the numbered buttons. The "OK" will be highlighted.
to certain
parental control feature allows you to block access to
scenes below the rating you input, thereby preventing your children from being able to view material you believe is unsuitable.
unlock, parental
played unless
rating
disc.
a
scenes are
Rating 1-8: Rating one (1) has the
eight (8) is the least restrictive.
same
suitable alternative is
2. Select
The
Unlock: If you select
the disc plays in full.
play the
no
Rating
rated from 1 to 8,
depending on the country. Some discs offer more suitable scenes
as an alternative.
scenes on
not
with the
Exit
scenes
to the
scenes
found, playback stops.
enter the 4-digit password or change the rating level
ENTER.
Many
information that applies
on
1. Select
DVD
Some movies contain
a
4. Press ENTER to confirm your rating
SETUP to exit the menu.
selection, then press
TIPS
control is not active and
?
If you make a mistake before pressing ENTER in each section, press
CLEAR to enter again or b repeatedly to delete password numbers
one by one then correct it.
?
If you enter the wrong
step.
password,
you
can
not
proceed
to the next
Initial
Setting (Continued)
Password
You
can
(Security Code)
create or change password.
Area Code
Enter the code of the
1. Select Password on the LOCK menu then press B. The
"Change" is highlighted
the DVD video disc, based
2. Press ENTER then the
3.
password window will appear.
To make a new password:
When the "New Password" section is highlighted, enter a
4-digit password using the numbered buttons then press
ENTER. Enter the 4-digit password again to verify when the
"Confirm Password" section is highlighted, then. The "OK"
will be highlighted.
To
change
the
password:
When the "Old Password" section is
4-digit password
highlighted,
enter the
you have created then press ENTER.
The"New Password" section will be
highlighted.
Enter
a new
4-digit password using the numbered buttons then press
ENTER. Enter the new 4-digit security password again to
verify when the "Confirm Password" section is highlighted.
The "OK" will be highlighted.
4. Press SETUP to exit the
menu.
If you
forget your Security Code
If you
forget
your
security code
you
can
clear it
using the fol-
lowing steps:
2.
Remove any disc from the unit and close the disc tray.
Press SETUP and setup menu appears on the TV screen.
Use the numbered buttons to enter the 6-digit number
"210499".
3.
Enter
1.
a new
password
as
described above.
area
whose standards
on
were
used to rate
the list in the reference
chapter.
1.
Select "Area Code"
2.
Select the first character
3.
Shift the cursor using B button and select the second
character using v / V buttons then press ENTER,
the
on
the LOCK menu then press B.
password window will
using
4.
Press ENTER, the
5.
If you have not entered
v / V
buttons.
appear.
password window will
appear.
password yet:
When the "New Password" section is highlighted, enter a
4-digit password using the numbered buttons then press
ENTER. Enter the 4-digit security password again to verify
when the "Confirm Password" section is highlighted. The
"OK" will be highlighted.
If you have entered password already:
Enter a 4-digit password you have entered
using the
bered buttons. The "OK" will be highlighted.
6. Press ENTER to confirm your Area Code
press SETUP to exit the menu.
num-
selection, then
21
Initial
Setting (Continued)
OTHERS
The PBC, Auto
Auto
Play
and B.L.E.
settings
be
can
changed.
You
Play
can
DVD
set up the DVD Player
so a
DVD disc
automatically
playing whenever the DVD is inserted.
If Auto Play mode is set to On, this DVD player will search for
title that has the longest playback time and then play back
the title automatically.
starts
OTHERS
PBC
Auto
BeforUse
22
On
On
Play
Move
PBC
Set
Select
Exit
activated.
Off: Auto
Play function is
not activated.
Playback Control (PBC)
to On
or
NOTE
Off.
The Auto
played according
Off: Video CDs with PBC are
played
the
same
to the PBC.
way
as
Audio
CDs.
NOTES
PBC:
Playback Control (Video CD only)
Playback control is available for Video CD (VCD)
version 2.0 disc
formats. PBC allows you to interact with the system via menus,
search functions, or other typical computer-like operations.
Moreover, still pictures of high resolution can be played if they
included in the disc. Video CDs not
1.1) operate in the
?
Play function is
VCD
On: Video CDs with PBC are
?
On: Auto
same
way
as
equipped
are
with PBC (Version
audio CDs.
Use the number buttons to select the track you want to view and
press RETURN to return to the menu screen. Menu settings and
may differ. Follow the instructions
You also may set PBC to Off.
operating procedures
each
menu screen.
on
the
Play function
may not work for
some
DVDs.
General Feature
On-Screen
Some items
Slow Motion
Display
can
be
changed using
1.
Press DISPLAY during
playback.
2.
Press b /B to select
item.
an
the
menu.
1.
2.
Press v / V to
can
also
highlighted.
change the setting.
3.
:
02/04
:
the number buttons if appropriate
the title number).
: Time search
Title(Track) Number,
Chapter Number (DVD disc only)
0:08:20
Moving
to another CHAPTER/TRACK
When
title
has
a
more
on a
than
Use the SLOW t
or
To exit slow motion
T to select the
required speed:
1/2 (backward), or
mode,
press PLAY.
disc has
one
track,
more
you
than
one
can move
chapter or a disc
to another
briefly during playback to select the
next chapter/track or to return to the beginning of the
current chapter/track.
Press SKIP . twice briefly to step back to the previous
chapter/track.
or
>
NOTE
Slow motion
playback in reverse
is not
applicable
for Video CD.
Title Menu
Checking
chapter/track as follows:
Press SKIP .
enter SLOWmode.
player will
during playback.
use
(e.g. inputting
02/04
The
T
1/16, t 1/8, t 1/4 or t
T 1/16, T 1/8, T 1/4 or T 1/2 (forward).
Press ENTER.
You
or
t
The selected item is
3.
Press SLOW t
the contents of DVD discs: Menus
DVDs may offer menus that allow you to access
tures. To use the disc menu, press TITLE.
Input the corresponding number or use the
to
highlight
special fea-
b B v V buttons
your selection. Then press ENTER.
Disc Menu
23
Press MENU and the disc
menu
is
displayed.
Press MENU again to exit.
Changing
the Audio
Language
Press AUDIO repeatedly
audio
language
or
during playback to
audio track.
hear
a
different
General Feature
Search
Press and hold SKIP/SEARCH .
1.
or
> for about two
during playback.
player will now go into
SEARCH mode.
Press and hold SKIP/SEARCH .
2.
select the
or
>
1.
repeatedly to
required speed: mX2, mX4, mX16,
mX100 (backward)
or
MX2, MX4, MX16, MX100
(forward).
With
a
Video CD, the Search
mX4, mX8, (backward)
(forward).
Still Picture and
3.
Press MARKER/SEARCH during
Press ENTER to recall
MX2, MX4, MX8,
Press REPEAT during
Frame-by-Frame Playback
Marker Search
Storing MARKER in the DVD memory is similar to marking
your page in a book. It allows you to quickly return to any
1.
select
Chapter: repeats the
?
Title: repeats the current title.
Off: does not play repeatedly.
?
?
marker in the memory
Press MARKER/SEARCH during play.
a
During playback,
playback to
?
?
the disc.
The MARKER SEARCH menu appears
2.
marker.
a
desired repeat mode.
current
chapter.
Video CDs
a
Storing
a
DVD Video Discs
?
point
marker.
a
Repeat
during playback. Advance
picture frame-by-frame by pressing PAUSE repeatedly.
on
playback.
from the point corresponding to the
selected marker, or the selected marker is cleared.
Press PLAY to exit still motion mode.
24
Marked Scene
a
Play resumes
Press PAUSE on the remote control
the
Clear
The MARKER SEARCH menu will appear on the screen.
2. Press F/G to select the marker to be recalled/ cleared.
speed changes: mX2,
or
or
Press CLEAR to clear
To exit SEARCH mode, press PLAY.
3.
remove
To Recall
seconds
The
the MARKER SEARCH menu, press
MARKER/SEARCH.
4.To
Off: does not
play repeatedly.
NOTES
?
on
press ENTER when
Track: repeats the current track
All: repeats all the tracks on a disc.
the
screen.
on a
a
Video CD with
menu
playback reaches
spot that you want to memorize.
3.Repeat step 2 to enter up to nine Marker points
On
the
disc.
?
to
use
PBC,
you must set PBC to Off
the repeat function (See "PBC"
on
If you press SKIP (>) once during Repeat
playback, the repeat playback cancels.
on
page
the setup
22).
Chapter (Track)
General Feature
Repeat
Subtitles
A-B
To repeat a sequence.
1. Press A-B at your chosen
3.
starting point.
"A
"
appears
the TV screen.
briefly on
2.
Press SUBTITLE repeatedly
Press A-B
the Audio Channel
Press AUDIO repeatedly
Press A-B
Last Scene
again to cancel.
zoom
the video
enlarge
to
Press ZOOM during
2.
Each press of the ZOOM button changes the screen in the
300%
400%
Normal (4 steps).
sequence: 200%
→
3Use the b
activate the Zoom function.
playback to
→
resume
B v V buttons to
playback,
move
through the
zoomed
press CLEAR.
Camera
disc that has the
DVDs.
recorded at different
angles,
you can change to a different camera angle during playback.
Press ANGLE repeatedly during playback to select a desired angle.
Note that the number of the current angle appears on the display.
scenes
scene
from the last disc that is
scene
scene
memorized, the
scene
is
automatically
NOTE
This
player does not memorize the scene of a disc
player before commencing to play the disc.
if you switch off
screen saver
appears when you leave the DVD player in
Stop mode for about five minutes. If the Screen Saver is displayed for five minutes, the DVD Player automatically turns
Angle
If the disc contains
last
recalled.
The
some
player memorizes
Screen Saver
NOTE
Zoom may not work on
different
remains in memory even if you remove
the disc from the player or switch off the player. If you load a
the
normal
a
→
picture.
To
hear
Memory
viewed. The last
image.
during playback to
audio channel (Stereo, LEFT or RIGHT).
This
1.
4.
Changing
again at your chosen end point.
"A B" appears briefly on the TV screen and the repeat
sequence begins.
Zoom
Use
different subtitle
during playback to display the
languages.
camera
itself off.
25
Playing
Audio CD
an
or
MP3/WMA Disc
Audio CD
MP3 / WMA disc
Once you insert an audio CD a menu appears on the TV screen.
Press v / V to select a track then press PLAY or ENTER to play-
as
?
back starts.
CD
00:00
Normal
/00:00
Sampling frequency:
TRACK 04
TRACK 05
TRACK 06
?CD-R
DISPLAY
Program
List
MP3 / WMA
see
press PLAY or ENTER to
Playback starts.
26
320kbps (MP3),
-
32
-
?
/00:00
Normal
that has
a
file exten-
using software that cannot create
system (eg. Direct-CD) it is impossible to playback MP3 /
file
File
?They
Music 02
should have
names
porate
Music 01
192kbps (WMA)
format should be ISO 9660
We recommend that you
ISO 9660 file system.
003 / 036
Operation
(MP3),
WMA files.
track then press PLAY or ENTER.
a
00:00
48 kHz
If you record MP3 / WMA files
a
the folder contents.
Press v / V to select
2.
folder, and
a
physical
PROGRAM Add
?
Press v / V to select
-
player cannot read an MP3/WMA file
sion other than ".mp3" / ".wma".
TRACK 03
1.
within 8
?The
TRACK 02
is limited
player
48kHz (WMA)
-
rate: within 8
?Bit
TRACK 01
with this
follows:
within 32
001 / 022
compatibility
an
.mp3
use
a
or .wma
should not contain
Easy-CD Creator,
which creates
an
maximum of 8 letters and must incor-
extension.
special
letters such
as
/ ?
*
"
:
< >
l
etc.
Music 03
Music 04
Music 05
?
DISPLAY
Program
List
PROGRAM
This DVD player
If you
are
the Folder
in
a
list,
file list
use
the MUSIC menu and want to return to
on
the v / V to
highlight
and press PLAY or
ENTER.
?Pr
ess
DVD MENU to
Press TITLE to
?
On
a
move
move
previous
page.
CD with MP3/WMA and JPEG you
can
contents.
a
folder,
discs and
recordings
to meet certain tech-
nical
standards in order to achieve
DVDs
are
automatically
(see above) to
switch MP3/WMA and
JPEG.
Press v / V to select
requires
optimal playback quality.
set to these standards. There
Pre-recorded
are
many dif-
ferent types of recordable disc formats (including CD-R containing
MP3 or WMA files) and these require certain pre-existing conditions
to the next page.
to the
the disc should be less than 648.
on
Add
TIPS
?
The total number of files
and press ENTER to
see
the folder
ensure
compatible playback.
Customers should note that
permission
is
required
in order to
download MP3 / WMA files and music from the Internet. Our
company has no right to grant such permission. Permission
should always be sought from the copyright owner.
Playing
Audio CD
an
or
MP3/WMA Disc
Audio CD and MP3 / WMA Disc Features
Repeat
1.
Pause
1.
Press PAUSE during
2.
To return to
playback.
playback,
PAUSE again.
press
press
A-B
To repeat a sequence during disc playback press A-B at
your chosen starting point. The Repeat icon and "A"
appear
2.
PLAY, ENTER or
Press A-B
1.
3.
to another Track
Press SKIP (. or >) briefly during playback to go to
the next track or to return to the beginning of the current
Press SKIP . twice
briefly to
any track by
Repeat
Track/All/Normal
You
can
play
play
a
track/all
2.
Press REPEAT to select
?
go back to the
previous
inputting
its number.
1.
screen, and the sequence
Press and hold SKIP/SEARCH (.
two seconds during playback.
2.
player will
play,
press A-B
disc.
now
disc. The repeat icon appears.
desired repeat mode.
playing
a
play repeatedly.
NOTE
If you press SKIP (>) once
the repeat playback cancels.
during Repeat
Track playback,
>) for about
go into SEARCH mode.
or
MX2, MX4, MX8 (forward).
speed and direction
are
indicated
a
3.
or
Press and hold SKIP/SEARCH (. or >)repeatedly to
select the required speed: mX2, mX4, mX8
Search
Track: repeats the current track
All: repeats all the tracks on a disc.
Normal: does not
menu
screen.
Press REPEAT when
?
the
play repeatedly.
(backward)
on a
1.
?
to
on
point. The Repeat icon
To exit the sequence and return to normal
The
can
at your chosen end
Search
track.
3. You
again
again.
track.
2.
menu screen.
and "A B" appear
begins
Moving
the
on
To exit SEARCH mode, press PLAY.
on
the
menu
27
Viewing
this DVD
Using
Player you
view discs with JPEG files.
can
disc and close the tray.
The PHOTO menu appears on the TV screen.
1.
Insert
JPEG Disc
a
a
001 / 052
00:00
/00:00
Normal
Still Picture
1.
Press PAUSE during slide show.
The player will now go into PAUSE mode.
2.
To return to the slide
PAUSE again.
File 02
show,
press
PLAY, ENTER or press
JPEG
Zoom
File 01
JPEG
File 03
Use
File 04
File 05
DISPLAY
Program
List
PROGRAM
1.
Add
Press v / V to select a folder, and press ENTER or PLAY.
A list of files in the folder appears. If you are in a file list
2.
and want to return to the
v / V buttons
on
Folder
list,
previous
remote to highlight
the
use
the
and press
ENTER or PLAY.
If you want to view
3.
Operation
28
a
particular file,
press v / V to
highlight file and press ENTER or PLAY. Viewing the file proceeding starts. While viewing a picture, you can press STOP
a
to
move
to the
previous
menu
2.
→
Moving
4.
To rotate
during showing
counter clockwise.
a
picture
100%
through the
zoomed
resume
?
compatibility with
this
player
is limited
as
follows:
Depending upon the size and number of JPEG files, it could take
a long time for the DVD player to read the disc's contents. If you
don't see an on-screen display after several minutes, some of the
files may be too large
reduce the resolution of the JPEG files
to less than 2M pixels as 2760 x 2048 pixels and burn another
---
disc.
a
picture
?The total number of files and folders
than 648.
to rotate the
picture
clockwise
on
the disc should be less
that all the selected files have the
copying into the CD layout.
?En
sure
".jpg"
extensions when
?
If the files have
as ".jpg" file.
?
File names without ".jpg" extension will not be able to be read
by this DVD player. Even though the files are shown as JPEG
image files in Windows Explorer.
to advance
picture
Press b / B
or
viewing
→
normal playback, press CLEAR or press ZOOM
repeatedly to select the 100%.
To
JPEG disc
JPEG
Press SKIP (. or >) once while
to the next or previous file.
→
picture.
(PHOTO menu).
On a CD with MP3/WMA and JPEG you can switch MP3/WMA and
JPEG. Press v / V to select a folder, and press ENTER to see the
folder contents.
to another File
to
150%
200%
sequence: 100%
3Use the b B v V buttons to move
TIPS
?Pr ess DVD MENU to move to the next page.
Press TITLE to move to the previous page.
?
enlarge the video image.
Press ZOOM during playback to activate the Zoom function.
Each press of the ZOOM button changes the screen in the
zoom
".jpe"
or
".jpeg" extensions, please
rename
them
Programmed playback
The program function enables you to store your favorite tracks
from any disc in the player memory.
A program can contain 30 tracks (Audio
disc. (Audio CD, MP3
Insert
2.
Press v / V to select the desired file.
3.
Press PROGRAM during
4.
or
WMA.)
Press DISPLAY.
Program List
menu
in the
move
to the
001 / 022
CD
00:00 /00:00
Normal
Program
previous
00:00
/00:00
Normal
List
Music 03
TRACK 03
Music 04
TRACK 04
Music 05
TRACK 05
Music 06
TRACK 06
DISPLAY
Delete
Audio CD Menu
Press PLAY or ENTER to start.
6.
To
CLEAR
Delete
playback from programmed playback.
Press DISPLAY then select
PLAY or ENTER.
Return
MP3/WMA Menu
5.
normal
2.
Press CLEAR.
Repeat
on
each
to
erase
additional tracks
operation item,
erase
on
from
the list.
refer to
playing.
Music 02
TRACK 02
resume
Use v / V to select the track that you wish to
the program list.
relevant page.
Music 01
TRACK 01
CLEAR
1.
page.
Program
Return
Track from program list
003 / 036
List
DISPLAY
a
appear.
Press v / V to select the track you want to start
Press DVD MENU to move to the next page.
Press TITLE to
Erasing
WMA
For details
stop mode.
playback
Repeat press PROGRAM to place additional tracks on
the program list.
or
MP3
CD, MP3/WMA).
1.
a
CD
a
track of list and then press
Operation
29
Maintenance and Service
Refer to the information in this
chapter before contacting
a
service technician.
When
shipping
Please
For
the unit
?
at the
the exterior surfaces clean
Do not
use
volatile
liquids such
as
insecticide spray
near
the unit.
?
Do not leave rubber
plastic products in contact with the
for a long period of time. since they leave marks on
unit
or
the surface.
Cleaning
the unit
To clean the
player,
extremely dirty, use
detergent solution.
Do not
thinner,
use
as
use a
a
soft, dry cloth. If the surfaces
soft cloth
strong solvents such
these
Maintaining
might damage
lightly moistened with
as
alcohol, benzine,
a
are
mild
or
the surface of the unit.
the Unit
high-tech, precision device. If the optical
disc drive parts are dirty or worn, the picture
The DVD player is
a
pick-up lens and
quality could be diminished.
30
operating environment, regular inspection
are
details, please
center.
original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
factory.
Keeping
the
recommended after every 1,000 hours of
use.
the
save
on
and maintenance
the Unit
Handling
Depending
contact your nearest authorized service
Language
Code List
Language
Code
Code
6566
Language
Fiji
Code
7074
Language
Lingala
Code
7678
Language
Singhalese
Abkhazian
Afar
6565
Finnish
7073
Lithuanian
7684
Slovak
8375
Afrikaans
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
Ameharic
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
8065
Tigrinya
8473
Bulgarian
6671
Indonesian
7378
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
8083
To nga
8479
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
8084
Twi
8487
Catalan
6765
Japanese
7465
Portuguese
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
8373
8471
31
Area Code List
Choose
an area
Code
Area
32
code from this list.
AF
Area
Code
Area
Code
Area
Code
ET
Malaysia
MY
Saudi Arabia
SA
AR
Ethiopia
Fiji
FJ
Maldives
MV
SN
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Heard and McDonald Islands HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
Chile
CL
Hong Kong
Hungary
HU
NG
Switzerland
CH
China
CN
India
IN
Nigeria
Norway
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
UG
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
Czech
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
Afghanistan
Argentina
Republic
SG
SK
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
KW
Portugal
PT
Uzbekistan
UZ
Egypt
EG
LY
Romania
RO
Vietnam
VN
El Salvador
SV
Libya
Luxembourg
LU
Russian Federation
RU
Zimbabwe
ZW
Troubleshooting
Cause
Symptom
No power.
No picture on the LCD or
TV (including video from
another unit).
?The
Correction
power cord is disconnected.
Plug
?
Recharge
securely.
?
Connect the video cable into the
correctly.
?
Set the AV IN/DVD switch correctly.
While you are playing a disc, set the AV IN/DVD
switch to DVD mode
While you are viewing video from other equipment,
set the AV IN/DVD switch to AV IN mode.
?The
battery
?The
video cable is not connected
?The
AV IN/DVD switch is not set
is
the power cord into the wall outlet
?
discharged.
the
securely.
battery.
jacks securely.
-
-
?
LCD mode is set to OFF.
?Check that
?The
Brightness
?
control is set to "--".
TV is not set to receive DVD signal
output.
Select
?Adjust
?
a
LCD mode other than OFF.
the
brightness.
Select the appropriate video input mode
the picture from the DVD player appears
on
on
the TV so
the
screen.
?
No sound.
The
equipment connected with the audio cable is
not set to receive DVD signal output.
?The
audio cables
are
not connected
?
Select the correct input mode of the audio receiver
you can listen to the sound from the DVD player.
?
Connect the audio cable into the
jacks securely.
securely.
?
The DVD player does not
start
playback.
?The
?
No response when buttons
are
An
unplayable
Rating
Some discs
disc is inserted.
level is set.
prohibit
certain
playable disc. (Check the
system and Regional code.)
?In sert
?
operations.
?"
a
Cancel the
Rating
function
"
may appear
on
the
or
disc type, color
change
screen
so
the
rating
level.
during operation.
pressed.
The remote control does
not work properly.
?The remote control is too far from the
DVD player.
?
Operate
the remote control within about 23 ft (7 m).
33
Specifications
DVD
Liquid Crystal Display
Player
Panel size: 7 inches wide
Power
supply:
DC 9.5V (AC adapter terminal), DC 7.4V (Battery)
Power
consumption:
Weight:
1.9 lbs (0.86
External dimensions
12W with
Projection system: Y/C stripe
battery
kg) (without battery pack)
(W x
H
x
D):
Driving system:
TFT active matrix
Resolution: 234
x
Supplied
?
DVD Laser
wavelength 662+25
CD Laser wavelength 785+25 /
/ 662-15
785-15
nm
Signal-to-noise
ratio
Harmonic distortion
More than 95 dB
(audio): 0.008
rate:
more
than
Temperature: 5°C to 35°C, Operation
Adapter (DP-AC90)
...................................................1
Adapter (DPB-C90).......................................1
?
Battery Pack (DPB-BS930)
?
Remote control ............................................................1
?
Battery for Remote control (Lithium Battery)
.............................................1
...................1
%
z
Operating conditions:
Design and specifications
notice.
status: Horizontal
Connectors
Video
input/output (VIDEO In/Out):
V (p-p), 75 Ω, negative sync., ø3.5mm mini jack x
Audio
input/output (AUDIO In/Out, analog audio):
Vrms(1 KHz, 0 dB), ø3.5mm mini jack x 1
Earphone
pixel
Accessories
?Automotive
(audio): More than 85 dB
Dynamic range (audio):
34
3 (effective
RCA Audio/Video cable ..................................................1
?AC
nm
Frequency range (audio):
DVD linear sound: 48kHz sampling 8 Hz to 20 kHz
96kHz sampling 8 Hz to 44 kHz
2.0
x
PAL
Laser:
1.0
480
99.99%)
7.6x1.5x5.7inches(194x38x145mm)
Signal system:
(diagonal)
terminal: ø3.5mm stereo mini
jack x 2
1
are
subject
to
change
without
Download PDF

advertising