LG | DR7922W | LG DR7922W Owner’s Manual

DR7922CW!C-HA2ALL-ENG
DVD RECORDER
OWNER'S MANUAL
MODEL
:
DR7922W
Before
connecting, operating
adjusting this product,
booklet carefully and completely.
please
read this instruction
or
Safety
Precautions
CAUTION
CAUTION
appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance
and has
CAUTION: TO REDUCE THE RISK
(OR BACK)
damaged
PERSONNEL.
symbol
is intended to alert the
within
user
an
to
risk of electric shock to
persons.
The exclamation
point
within
is intended to alert the
important operating
or
cracked wire insulation
are
dangerous. Any
user
an
or
or
or
of
fire.
examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, dis-
Periodically
the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient
magnitude
page of this owner's manual to be certain.
these conditions could result in electric shock
with arrowhead
a
branch circuits. Check the
outlets, loose
damaged wall outlets, extension cords, frayed power cords,
REFER SERVICING TO QUALIFIED SERVICE
to constitute
or
Do not overload wall outlets. Overloaded wall
NO USER-SERVICEABLE PARTS INSIDE
lightning flash
equilateral triangle
additional outlets
no
specification
OF ELECTRIC SHOCK
This
Power Cord
Most
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DO NOT REMOVE COVER
concerning the
equilateral triangle
to the presence of
continue
an
appliance, and have the cord replaced
replacement part by an authorized servicer.
use
exact
of the
with
Protect the power cord from physical or mechanical abuse,
such as being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall
the point where the cord exits the appliance.
outlets, and
and maintenance
instructions in the literature
(servicing)
accompanying the
product.
SERIAL NUMBER:
You
can
find the serial number
the back of the unit. This
number is
unit and not available to others. You
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
should
information here and retain this
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
as a
OR MOISTURE.
as a
bookcase
or
equipment
in
confined space
a
Serial No.
______________________________
______________________________
similar unit.
The
appliance
children
or
is not intended for
infirm persons without
by young
supervision.
use
Young Children should be supervised
that they do not play with appliance.
If the
CAUTION:
This
To
product employs
ensure
proper
use
a
Laser
of this
System.
product, please
read this owner's
manual
carefully and retain it for future reference. Should the
unit require maintenance, contact an authorized service center.
Performing controls, adjustments, or carrying out procedures
other than those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION:
CLASS 2M VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS DEFEATED DO NOT
STARE INTO THE
BEAM OR VIEW DIRECTLY WITH OPTI-
CAL INSTRUMENTS.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as
vases, should be
2
guide
permanent record of your purchase.
Model No.
WARNING: Do not install this
such
unique to this
record requested
on
placed
on
the
apparatus.
ensure
supplied from a cord extension
set or an electrical portable outlet device, the cord
extension set on electrical portable outlet device
must be positioned so that it is not subject to
splashing or ingress of moisture.
appliance
is
to
Table of Contents
Disc..............................26-27
INTRODUCTION
SafetyPrecautions.......................2
?Initialize............................26
TableofContents........................3
?DiscProtect.........................26
DVDRecorderOverview................4-10
?Finalize............................27
.4
RecordableandPlayableDiscs.
PlayableDiscs.........................5
?DiscLabel..........................27
.
.
.
.
.
.
.
.
.
.
Overview for the On-Screen
Display
.
.
.
.
.
.
.
.
28
Disc-relatedterms......................6
AboutSymbols.........................6
Aboutrecordablediscs...................7
PLAYBACK
.29-32
DVDorVideoCDPlayback.
PlayingaDivXMovieDisc................33
34-36
Audio CD and MP3/WMA Operation
34-35
Playing an Audio CD or MP3/WMA file
ProgrammedPlayback..................36
JPEGFileOperation..................37-38
.
AboutDVDrecording...................8-9
Precautions..........................10
NotesonDiscs........................10
FrontPanel............................11
RemoteControlOverview................12
DVR HOOKUP
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
RECORDING
Connections........................13-16
RearPanelConnections.................13
BasicRecording........................39
.39
BasicRecordingfromTVchannels.
InstantTimerRecording.................39
TimerRecording.....................40-41
Recording from an External Input Source 42-43
42
Recording from External Components
42
Recording from a Digital Camcorder
.
ConnectingtotheAerial.................13
ConnectionstoYourTV.................14
ConnectingtoanAmplifier...............15
16
Accessory Audio/Video (A/V) Connections
.
.
.
.
.
.
.
.
.
.
DVR SETUP
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
WhatisDV?..........................43
Pre-operationSetup..................17-28
InitialSettings.........................17
General...........................17-21
?AutoProgramming....................17
?ProgramEdit.....................18-19
?ClockSet..........................20
?TVAspectRatio.....................20
?DisplayMode.......................20
?ProgressiveScan....................20
?PBC..............................21
?FactorySet.........................21
Language............................21
?DisplayLanguage....................21
?DiscLanguage......................21
Audio...............................22
.22
?DolbyDigital/DTS/MPEG.
?SamplingFrequency..................22
.22
DRC(DynamicRangeControl).
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?
?V ocal..............................22
Lock(ParentalControl)...............23-24
?SetPassword.......................23
?Rating.............................23
?AreaCode..........................24
?DivX(R)VOD........................24
Recording............................25
?RecordModeSet....................25
?RecordAspectRatio..................25
?DVRecordAudio.....................25
?AutoChapter........................25
EDITING
44
Chapter List Menu Overview
.45-50
TitleandChapterEditing.
Titles,Chapters,andParts...............45
AddingChapterMarkers.................45
ChangingTitleThumbnails...............45
MakingaNewPlaylist...................46
Adding Additional Title/Chapters to the Playlist 46
DeletingaTitle/Chapter.................47
DeletingaPart........................47
NamingaTitle........................48
.48
CombiningTwoChaptersIntoOne.
MovingaPlaylistChapter................49
Title List and
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ProtectaTitle.........................49
HideaChapter........................50
DividingOneTitleIntoTwo...............50
REFERENCE
AdditionalInformation...................51
OverwritingRecording..................51
Viewing Title List menu displayed on
.51
otherDVDRecordersorPlayers.
Playing Your Recordings on Other
.51
DVDPlayers(FinalizingaDisc).
.52
LanguageCodeandAreaCodeList.
53
Controlling Your TV with the Supplied Remote.
Troubleshooting.....................54-55
Specifications.........................56
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3
INTRODUC
DVD Recorder Overview
Recordable and
DVD-RW
DVD-RW discs
the
Video Disc
(Digital
These Discs
Discs
Playable
ReWritable):
-
be formatted for VR mode
can
be recorded
can
recording
repeatedly. Recordings
on
or
Video mode
be
can
recording.
erased, then you
can
record
again
on
Disc.
same
[VR mode]
Recordings can be extensively edited
Playable only on VR mode compatible players (after finalization)
[Video mode]
Playable on regular DVD players (after finalization)
Limited editing features
DVD-R
Video Disc
(Digital
Recordable)
These Discs can be recorded only once. After you finalize
DVD-R discs can be only formatted to Video mode.
Playable on regular DVD players (after finalization)
Limited editing features
DVD+RW
the
Video Disc
(Digital
These Discs
can
+
be recorded
ReWritable)
on repeatedly. Recordings
a
be
can
erased, then you
on
(Digital
These Discs
any
can
it
on
record
edit it.
or
again
on
DVD+RW
compatible players (automatically finalization)
The edited contents are playable on DVD+RW compatible players only
Recordings can be edited the title/chapter
DVD+R
cannot record
DVD-R, you
Disc.
same
Playable
-
Video Disc
can
be
Recordable)
recorded only once. After
after finalization
+
you finalize
a
DVD+R, you
cannot record
on
it
or
edit it
more.
Playable on DVD+R compatible players (after finalization)
Any edited contents are not be compatible on DVD+R compatible players. (Hide, chapter combine,
added chapter mark, etc.)
Limited title/chapter editing features.
DVD+R DL
(Digital
These Discs
it any
can
Video Disc
be recorded
+
Recordable; Double Layer)
only
once.
After you finalize
a
DVD+R
DL, you
cannot record
on
it
or
edit
more.
space is nearly doubled with double
8.5GB of video on a single DVD+R disc.
Storage
layer
DVD+R
media, allowing
consumers
to record up to
Playable on DVD+R DL compatible players (after finalization)
Any edited contents are not be compatible on DVD+R DL compatible players. (Hide, chapter combine,
added chapter mark, etc.)
Limited title/chapter editing features.
The recommendable recordable DVD discs
DVD-R
SONY
(8x, 16x)
TDK (4x, 8x)
Ve rbatim (4x, 8x)
Panasonic (2x, 4x)
DVD+R
DVD-RW
SONY
(2.4x, 4x, 8x, 16x)
TDK (4x)
Mitsubishi (4x, 8x)
Ricoh (2x, 4x, 8x)
DVD+RW
Victor
(1x, 4x)
Maxell (1x, 2x, 4x)
TDK (2x)
Mitsubishi (2x)
DVD+R(DL)
Mitsubishi (2.4x)
Maxell (2.4x)
SONY
(2.4x)
TDK (2.4x)
Philips (4x)
Ricoh (2.4x)
---H P (2.4x, 4x)
-
-
-
Note:
If
a
DVD-RW/DVD+RW discs is recorded
this recorder. So if you want to
4
use
using
the disc
on
a
personal computer
this
recorder, you
or
other DVD
recorder, you
must format the disc
using
the
cannot format the disc
original
recorder.
using
DVD Recorder Overview
Playable
Discs
DVD(8cm/12cmdisc)
Discs such
Video CD
movies that
as
(VCD) (8
VIDEO CDs
or
cm
be
can
/ 12 cm
purchased
or
rented
INTRODUC
disc)
CD-Rs/CD-RWs in VIDEO
CD/Super
VIDEO CD format
AudioCD(8cm/12cmdisc)
Music CDs
or
CD-R/CD-RW
CD-Rs/CD-RWs in music CD format that
(8
cm
/ 12 cm
can
be
purchased
disc)
CD-R/CD-RW discs that contain audio
titles, DivX, MP3, WMA,
or
JPEG files.
Notes:
--
--
--
--
--
--
Depending on the conditions
R/RW (or DVD±R/RW) discs
recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CDcannot be played on the unit.
Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing so may result in malfunctions.
Depending on the recording software & the finalization, some recorded discs (CD-R/RW or DVD±R/RW) may not
be playable.
DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder may
not play if the disc is damaged or dirty, or if there is dirt or condensation on the Recorder's lens.
If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in
which it may not play because of the settings of the application software used to create the disc. (Check with the
software publisher for more detailed information.)
Regional
code of the recorder and DVDs
This recorder is
4
of the
code
on
designed
the labels of
and manufactured for
some
playback
DVD discs indicates which
play only DVD discs labeled 4 or ALL. If
code. Can't play back" will appear on the TV screen.
though their playback is prohibited by area limits.
can
of
Region
4 encoded DVD software. The
region
type of the recorder can play those discs. This unit
play any other discs, the message "Incorrect region
you try to
Some DVD discs may not have
a
region
code label
even
Notes on DVDs and Video CDs
Some
unit
playback operations of DVDs and Video CDs may be intentionally fixed by software manufacturers. As this
plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playback
features of the unit may not be available or other functions may be added.
Refer also to the instructions supplied with the DVDs and Video CDs. Some DVDs made for business purposes
may not be played on the unit.
Remote Control
Operation
Point the Remote Control at the remote
Remote Control
Battery
sensor
and press the buttons.
Installation
Remove the
batteries with
battery
cover on
and
the
matched
rear
of the Remote
Control, and insert
two R03
(size AAA)
correctly.
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
5
DVD Recorder Overview
(Continued)
Disc-related terms
DVD +R
(Double Layer)
Double layer recording technology offers two recordable
layers on a single DVD disc, providing nearly double the
capacity of 4.7GB single layer DVDs. The greatest,
most valuable benefit of double layer recording technology is increased capacity. Storage space is nearly doubled with double layer DVD+R media, allowing consumers to burn up to 8.5GB of video on a single
DVD+R disc.
DVD±R/DVD±RW
DVD -R and DVD +R
are
two different standards for
recordable DVD drives and discs. This format allows
information to be recorded onto the DVD disc
DVD +RW and DVD -RW
once.
re-writable
media, meaning
erased and re-recorded.
4.38
Gigabytes
of Video CDs
Types
are
only
There
are
two
types of Video CDs:
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
Video CDs
PBC
with the
system via
tion still
pictures
menus, search
functions, or other
typical computer-like operations. Moreover, high resolucan
be
included
are
the DVD content
Single-sided
discs
can
can
be
hold
and double-sided discs hold twice
as
Video CDs not
with PBC
equipped
(Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
About
Symbols
About the
"
symbol display
"
may appear on the TV
This icon means the function
during operation.
explained in this owner's
that specific disc, or at that
on
screen
time.
(DVD only)
The main film content,
or music album.
Each title is
assigned
locate it easily.
accompanying
a
feature content,
title reference number
enabling
About the disc
symbols
A section whose title has
Many
dent
for instructions
one
of the
to those discs
applicable only
symbol.
are
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number to
enable you to locate the chapter you want. Depending
on the disc, chapters may not be labeled.
following symbols
represented by the
functions
the
on
provided on this Recorder
recording mode. One or more
VR
bols(
,
Video
DVD+R
,
,
DVD+RW
each function
see
at
a
are
depen-
of the sym-
appear by
so that you can
(explained in this manual)
glance whether it's applicable to
)
the disc
loaded.
Track
(Video
CD and Audio CD
only)
Sections of a picture or a musical piece on a Video CD
or an Audio CD. Each track is assigned a track number,
enabling you to locate the track you want.
Scene
On
Video CD with PBC
(Playback control) functions,
moving pictures and still pictures are divided into sections called "Scenes". Each scene available is displayed
on the Scene menu and assigned a scene number,
enabling you to locate the scene you want.
A scene may be composed of one or several tracks.
a
DivX
DivX is the
name
which is based
on
of
a
the
revolutionary
new
MPEG-4
dard for video.You will be able to
using
6
this DVD
on
the disc.
manual is not available
you to
they
two standards for
much.
Title
if
played
player.
new
Video
DVD-R/RW with Video
VR
DVD-RW with VR
+R
DVD+R
(DL)
DVD+RW disc
DVD
DVD-Video disc
VCD
Video CDs
CD
Audio CDs
DivX files
MP3
MP3 files
WMA
WMA files
JPEG
JPEG files
recording
mode
mode
disc
+RW
DivX
recording
video codec
compression stanplay DivX movies
The finalized DVD disc is
a
DVD-Video disc.
DVD Recorder Overview
(Continued)
About recordable discs
How
are
DVD+RW mode
recordable discs different?
The essential difference among DVD-R, DVD-RW,
DVD+R and DVD+RW is that DVD-R and DVD+R
recording +RW
?4different picture quality/recording time settings available (HQ, SQ, LQ, EQ)
Playable on regular DVD players
The edited contents is playable on regular DVD players only after finalizing
Recordings can be edited the title/chapter
?
are
?
record-once
medium, while DVD-RW and DVD+RW
re-recordable/erasable medium. You
can
are
re-record/
?
erase a
DVD-RW and DVD+RW disc
approximately
1,000 times.
DVD+R mode
Can I
play my recordable discs in a regular DVD
player?
Generally, DVD-R, DVD+R and DVD-RW discs recorded in Video mode are playable in a regular DVD player,
but they must be 'finalized' first. This process fixes the
contents of the disc to make them readable to other
DVD
players
as
DVD-Video discs.
DVD-RW discs recorded in VR
are
playable
in
some
players.
Unfinalized DVD+RW discs
DVD
player.This
indicates
capable
of
with Video
What
are
There
are
mode
(Video Recording)
are
playable
in
a
regular
product feature that is
playing DVD-RW discs recorded
Recording format.
a
'recording modes'?
various
recording modes available using this
Recorder. When recording to a DVD-R, DVD+R or
DVD+RW disc, recordings are always in Video mode.
DVD-RW discs can be formatted for VR mode recording
or Video mode recording.
VR mode
VR
recording
?4different picture quality/recording time settings
able (HQ, SQ, LQ, EQ)
Not playable on regular DVD players
Recordings can be extensively edited
avail-
?
+R
recording
?4different picture quality/recording time settings available (HQ, SQ, LQ, EQ)
Playable on regular DVD players (after finalization)
Any edited contents are not be compatible on regular
DVD players. (Hide, chapter combine, added chapter
mark, etc.)
Limited title/chapter editing features.
?
?
?
Note :
DVD-Video Format
(Video mode)
is
a new
format for
recording on DVD-R/RW and DVD+R/RW discs that
was approved by the DVD Forum in 2000. You may
therefore experience problems playing recordable DVD
discs in some players. Symptoms include video artifacts, audio and/or video dropouts and playback suddenly stopping.
Our company cannot take responsibility for problems
playing discs recorded on this Recorder in other players.
Is
editing
a
DVD like
editing
a
video
tape?
No. When you edit a video tape you need one video
deck to play the original tape and another to record the
edits. With
DVD, you edit by making
play and when to play it.
plays the disc according to
to
On
the
'Playlist' of what
playback, the Recorder
Playlist.
a
?
Video mode
recording Video
?4different picture quality/recording time settings available (HQ, SQ, LQ, EQ)
Playable on regular DVD players (after finalization)
Limited editing features
?
About word
and
'Playlist'
Throughout this manual, you will often see the words
Original and Playlist to refer to the actual content and
the edited version.
?
?
content refers to what's
Original:
on
?
actually
recorded
the disc.
content refers to the edited version of the
Playlist:
disc
---
how the
Original
content is to be
played.
Disc type
Disc format
Recording
DVD-Video
Video format
n/a
Playback only
DVD-RW
Video
Recording
format (default)
VR mode
Playback, Recording, Original/Playlist Editing
Video format
Video mode
Playback,
limited
Recording,
limited
Editing
DVD-R
Video format
Video mode
Playback,
limited
Recording,
limited
Editing
DVD+RW
+RW Video format
DVD+RW
Playback,
limited
Recording, Title/Chapter Editing
DVD+R
+R Video format
DVD+R
Playback,
limited
Recording,
(DL)
mode
'Original'
Functions
limited
Title/Chapter Editing
7
INTRODUC
DVD Recorder Overview
About DVD
(Continued)
Notes for
recording
?
This recorder cannot make
recordings
on
CD-R
This
or
Our company takes no responsibility for recording failure due to power outages, defective discs, or damage
?
to the Recorder.
?
Fingerprints and small scratches on a disc can affect
playback and/or recording performance. Please take
proper
?
of your discs.
care
Disc types and
and settings
recording formats, modes,
This recorder
can
pre-recorded
DVD-Video
play
?
five different kinds of DVD discs:
always
?
?
discs, DVD-RW, DVD-R,
"Video format"---the
ed DVD-Video discs. This
you
can
play
a
DVD-R in
means
a
same as
that
regular
once
pre-record-
finalized,
will take up
8
on
the disc.
?
DVD
not exact because the
variable bit-rate video
that the exact
compression.
recording time will depend
the material
The
recording time available may decrease if you
heavily edit a disc.
If using a DVD-RW disc, make sure you change the
recording format (Video mode or VR mode) before
you record anything on the disc. See page 26
(Initialize) for how to do this.
When using a DVD-R disc, you can keep recording
until the disc is
player.
Video Recording
By default, the DVD-RW disc format is
(VR) format, though you can change this to Video format, if required. (Reinitializing the disc will erase the
contents of the disc.)
The recording mode is closely related to the disc format. If the disc format is Video Recording format, then
the recording mode is VR mode; if the disc format is
Video mode, then the recording mode is Video mode
(except for DVD-Video, which is not recordable, and so
does not have a recording mode).
Within the recording modes (which are fixed for them
whole disc) are the record settings. These can be
changed as required for each recording and determine
the picture quality and how much space the recording
means
are
disc.
DVD+RW and DVD+R discs. The disc format for DVD-R
discs is
uses
times shown
being recorded.
When recording a TV broadcast, if the reception is
poor or the picture contains interference, the recording times may be shorter.
If you record still pictures or audio only, the recording
time may be longer.
The displayed times for recording and time remaining
may not always add up to exactly the length of the
on
CD-RW discs.
?
recording
recorder
Notes :
?
The
recording
until you finalize the disc.
recording session, check the
full,
or
Before you start a
amount of recording time left
?
When
using
a
?
?
the disc.
DVD-RW disc in Video
time available will
title recorded
on
on
increase if you
the disc.
The Erase Title
only
in the Title
erase
the last
List-Original menu
only hides the title, it does not actually erase the title
from the disc and increase the recording time available (except for the last recorded title on a DVD-RW
disc in Video mode).
Overwrite recording is available using DVD+RW
discs.
option
mode, recording
DVD Recorder Overview
Restrictions
?Y
video
on
(Continued)
recording
copy-protected video using this
recorder. Copy-protected video includes DVD-Video
discs and some satellite broadcasts. If copy-protected
material is encountered during a recording, recording
will pause or stop automatically and an error message
will be displayed on-screen.
?V ideo that is 'copy-once only' can only be recorded
using a DVD-RW disc in VR mode with CPRM (see
below).
NTSC format signals from the analog or the DV
inputs is not recorded correctly with this recorder.
?V ideo signals in SECAM format (from the built-in TV
tuner or from the analog inputs) are recorded in PAL
ou
cannot record
INTRODUC
?
format.
What is 'CPRM'?
CPRM is
protection system (with scramble system) only allowing the recording of 'copy once' broada
copy
cast programs. CPRM stands for Content Protection for
Recordable Media.
This Recorder is CPRM
compatible,
which
means
that
record copy-once broadcast programs, but you
cannot then make a copy of those recordings. CPRM
you
can
recordings
can
only
be made
on
DVD-RW discs format-
ted in VR
mode, and CPRM recordings
played
players
on
that
are
only be
specifically compatible with
can
CPRM.
Copyright
?
Recording equipment should be used only for lawful
copying and you are advised to check carefully what
is lawful copying in the area in which you are making
a copy. Copying of copyright material such as films or
music is unlawful unless permitted by a legal exception or consented to by the rights owner.
?
This
product incorporates copyright protection technology that is protected by method claims of certain
U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses
only, unless otherwise authorized by Macrovision corporation. Reverse engineering or disassembly is prohibited.
?
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE.
IN CASE OF 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE
USER SWITCH THE CONNECTION TO THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL
625p
DVD
RECORDER,
PLEASE CONTACT OUR CUSTOMER SERVICE
CENTER.
9
DVD Recorder Overview
(Continued)
Precautions
Notes
Handling
the unit
Handling
on
When
shipping the unit
The original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packaged at the factory.
Discs
discs
Do not touch the
disc
the
by
playback side of the disc. Hold the
edges so that fingerprints will not get on the
surface. Do not stick paper
or
tape
the disc.
on
When
setting up the unit
The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. In this case, position
the unit away from the TV, VCR,
unit after removing the disc.
or
radio,
turn off the
or
Storing
After
To
keep
Do not
near
the surface clean
use
volatile
such
liquids,
as
the unit. Do not leave rubber
contact with the unit for
leave marks
on
a
insecticide spray,
plastic products in
long period of time. They will
or
discs
playing,
there may be a considerable
increase inside the car.
light,
as
a
use a
the unit
soft, dry cloth. If the surfaces
soft cloth
solution. Do not
benzine,
or
temperature
the surface.
To clean the cabinet
Use
case.
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
Cleaning
Cleaning
store the disc in its
lightly
use
thinner,
are
moistened with
a
extremely dirty,
mild detergent
strong solvents such
as
these
as
might damage
discs
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the center outward.
alcohol,
the surface
of the unit.
Yes
To obtain
clear
picture
The DVD Recorder is a high-tech, precision device. If
the optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
No
Do not
strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
use
spray intended for older
vinyl
records.
Moisture Condensation
Never
operate this product immediately after moving
it from
a
two
three hours without
or
cold location to
a warm
operating it. If you
situation, it may damage
product in such a
discs/tapes and internal parts.
10
location. Leave it for
use
this
Front Panel
ab c d
e
f
ghi
REC
INTRODUC
2
jk l
a
POWER
Switches the recorder ON
b
c
d
or
i
Remote Sensor
Point the recorder remote control here.
j
INPUT2
OFF.
N
(PLAY)
Starts playback.
(STOP)
Stops playback
recording.
or
k
recording.
Press
repeatedly
f
Disc Tray
Insert a disc here.
g
OPEN/CLOSE
INPUT 2
(S-VIDEO IN)
output of an external
(TV/ Monitor, VCR, Camcorder, etc.).
to set the record-
source
lDVIN
PROG. (V/v)
Scans up or down
or
(Left/Right))
Connect the S-Video
time.
Opens
IN/AUDIO IN
output of an external
source (Audio system, TV/ Monitor, VCR,
Camcorder, etc.).
z (REC)
ing
(VIDEO
Connect the audio/video
x
Starts
e
m
through
Connect the DV
memorized channels.
m
output of
a
digital
camcorder.
PIP
Selects PIP function
on or
off.
(Z)
closes the disc
tray.
h Display
window
Shows the current status of the recorder.
REC: The recorder is
:
or a
recording.
Indicates when the recorder is in timer
timer
recording
is
recording
programmed.
clock, total playing
time, elapsed time, title number, chapter/track number, channel, etc.
:
Indicates
11
Remote Control Overview
CHP.ADD: Inserts
chapter
playing/recording.
when
a
CLEAR: Removes
the
on
track number
a
List
Program
the Marker Search
marker
or a
mark
on
SKIP(./>):Gotonext
chapter or track. Returns to beginning of current chapter or track or
go to previous chapter or track.
STOP
DISPLAY: Accesses On-Screen
(x): Stops playback
recording.
Display.
SUBTITLE: Selects
ENTER
guage.
-
menu.
Acknowledges menu selection.
Displays information while viewing
THUMBNAIL: Selects
forward
TIMER REC:
TV program.
length
on
of
a
Skips 15 seconds
the disc (about the
typical TV: commercial).
MARKER: Marks any
point during
MENU/LIST: Accesses
menu on a
DVD disc. Switches between Title
and Title
List-Original
List-Playlist
menu.
Record
menu.
TITLE:
Displays
-
(Z): Opens
closes the disc
tray.
and
(X) : Pause playback
or recording temporarily, press
again to exit pause mode.
PIP: Selects PIP function
Starts
(N):
on or
off.
playback.
POWER: Switches the recorder ON
OFF.
REC
(z): Starts recording. Press
repeatedly to set the recording time.
REC MODE: Selects the
(HQ, SQ, LQ
REPEAT:
or
recording
EQ).
Repeat chapter, track,
title, all.
RETURN
-
in
-
(O)
Removes the
Displays
the
menu.
menu
b / B / v / V
(left/right/up/down):
Selects an option in the menu.
PR (+/-): Scans up or down through
SCAN
ward
(m
or
/
M):
SEARCH:
Displays
menu.
A-B:
SETUP: Accesses
sequence.
AUDIO: Selects
(DVD)
AV:
or an
audio
audio
language
channel (CD).
an
Changes the input to
recording (Tuner, AV1-2,
12
use
or
a
video CD
for
DV
IN).
Setup
Search back-
forward.
memorized channels.
Repeat
of
with PBC.
a menu.
menu.
POWER: Turns the TV
Marker Search
or removes
the
on or
off.
source.
PR +/--: Selects TV's channel.
VOL +/--:
ZOOM:
PAUSE/STEP
mode
the disc's Title
-AV: Selects the TV's
-
OPEN/CLOSE
or
Timer
TV Control Buttons
-
PLAY
Displays
menu, if available.
playback.
options
thumbnail
a
INSTANT SKIP:
a
numbered
subtitle lan-
picture for the current title and
chapter for use in the Original and
Playlist menu.
-
0-9 numerical buttons: Selects
a
or
Adjusts
Enlarges
TV's volume.
DVD video
image.
Connections
Rear Panel Connections
abc
hi
a
d
j
e
f
c
a
Pb
e
on
TV.
i
a
TV with Y Pb Pr
AUDIO OUT
(Left/Right)
Connect to
TV with audio
a
inputs.
(Digital audio out jack)
to digital (coaxial) audio equipment.
AUDIO IN 1
(Left/Right)
Connect the audio
output of an external source
(Audio system, TV/Monitor, VCR, Camcorder).
inputs.
kVIDEOIN1
Connect the video
output of an external source
(Audio system, TV/Monitor, VCR, Camcorder).
VIDEO OUT
f Cooling
from the AERIAL to your TV/moni-
COAXIAL
Connect
j
Connect to
g
Input
Pr)
Connect to
d
S-Video
COMPONENT VIDEO OUT/PROGRESSIVE SCAN
(Y
signal
tor
S-VIDEO OUT
Connect to
RF. OUT
Passes the
Connect the aerial to this terminal.
b
DVRHOKUP
k l
h
AERIAL
g
a
TV with video
inputs.
l
fan
OPTICAL
Connect
(Digital audio out jack)
to digital (optical) audio equipment.
AC Power Cord
Plug
into the power
Connecting
source.
to the Aerial
Rear of TV
Aerial
SCART INPUT
Remove the aerial cable
plug from your TV set and
insert it into the aerial socket at the back of the
ANTENNA
INPUT
AUDIO INPUT
L
recorder.
socket
input
on
Plug
one
VIDEO
INPUT
R
end of the aerial cable into the TV
the recorder and the other end into the aerial
socket
on
your TV set.
R
RF coaxial connection
Connect the RF. OUT
jack on the recorder to the aerial
input jack on the TV using the 75-ohm Coaxial Cable
supplied (R). The RF. OUT jack passes the signal
through from the AERIAL jack.
Rear of the recorder
13
Connections
(Continued)
Connections to Your TV
Tips
your TV and other equipment you wish
to connect, there are various ways you could connect
the recorder. Use only one of the connections
Depending
on
Make
the
of the
following connections, depending
capabilities of your existing equipment.
one
on
described below.
Video connection
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
Connect the VIDEO OUT
the DVD Recorder to
the video in
the video cable
best connections.
jack
the
on
jack on
TV using
(V).
S-Video connection
Caution
--
Make
sure
the DVD Recorder is connected
the TV. Tune the TV to the correct video
directly to
input chan-
Do not connect the DVD Recorder's AUDIO OUT
to the
phono
in
jack (record deck)
jack
of your audio sys-
tem.
--
the recorder to the
S-Video in
S-Video cable
jack
Do not connect your DVD Recorder via your VCR.
The DVD image could be distorted by the copy protection
system.
INPUT
COMPONENT VIDEO INPUT
Y
Pb
Pr
AUDIO INPUT
L
VIDEO
INPUT
R
the TV
(S).
Connect the COMPONENT VIDEO OUT
jacks on the
DVD Recorder to the corresponding input jacks on the
TV using an Y Pb Pr cable (C).
Progressive Scan
If your television is
Rear of TV
S-VIDEO
on
jack on
using the
Video connection
Component
nel.
--
Connect the S-VIDEO OUT
connection
high-definition or "digital ready"
television, you may take advantage of the recorder's
progressive scan output for the highest video resolution
possible. If your TV does not accept the Progressive
Scan format, the picture will appear scrambled if you try
Progressive Scan on the recorder.
a
Connect the COMPONENT VIDEO OUT /
PROGRESSIVE SCAN
in
corresponding
cable (C).
jacks
jacks
on
on
the TV
the recorder to the
using
the Y Pb Pr
Notes :
S
C
AV
Set the
Progressive to "On" on the setup menu for
progressive signal, see page 20.
Set the progressive to "Off" by removing any disc
from the unit and close the disc
DISC" is
displayed
on
the
tray. See that "NO
display
window. Then
press STOP and hold it for five seconds before
releasing it.
Progressive
scan
video connections
does not work with the
(yellow
VIDEO OUT
analog
jack) or
S-VIDEO connection.
Audio
Rear of the recorder
(Left/Right) Connection
Connect the left and
right
AUDIO OUT
Recorder to the audio left and
using
the audio cables
Recorder's AUDIO
(record deck)
14
right
IN
jacks of
jacks on
the DVD
the TV
(A). Do not connect the DVD
OUT jack to the phono in jack
of your audio
system.
Connections
Connecting
(Continued)
to an
Amplifier
Rear of the recorder
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic ll/
Pro Logic
Connect the Left and
DVRHOKUP
jacks on the
DVD Recorder to the audio left and right in jacks on
your amplifier, receiver, or stereo system, using the
audio cables (A).
Right
AUDIO OUT
with two
Connecting
channel digital
to an
amplifier equipped
stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2, or DTS)
1
Connect
one
X
A
O
of the DVD Recorder's DIGITAL
AUDIO OUT
jacks (OPTICAL O or COAXIAL X) to
the corresponding in jack on your amplifier. Use an
optional digital (optical O or coaxial X) audio cable.
You will need to activate the recorder's
2 put. (See
Digital
"Audio"
on
page
digital
out-
22).
COAXIAL
DIGITAL INPUT
R
L
AUDIO INPUT
OPTICAL
DIGITAL INPUT
Amplifier (Receiver)
Multi-channel sound
A
digital multi-channel
sound quality. For this
connection
provides
the best
you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats
supported by your DVD Recorder
(MPEG 2, Dolby Digital and DTS). Check the receiver
manual and the logos on the front of the receiver.
Caution:
Due to the DTS
will be in DTS
Licensing agreement, the digital output
digital out when DTS audio stream is
selected.
Notes :
--
If the audio format of the
digital output
does not match
the
--
capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
--To
see
on-
press AUDIO.
This recorder does not perform internal
screen
--
the audio format of the current DVD in the
display,
decoding
of
a
DTS sound track. To
multi channel
surround, you
recorder to
DTS
recorder's
a
digital
must connect this
compatible
audio
(2 channel)
enjoy DTS
receiver via
one
of this
outputs.
15
Connections
Connecting
(Continued)
to the INPUT 1 or INPUT 2
Jacks
Connect the
input jacks (AV1, AV2) on the recorder to
the audio/video out jacks on your accessory component, using audio/video cables.
Note:
If you use the S-VIDEO IN jack on the front panel, the
VIDEO IN jack on the front panel is not available.
Connecting
connect
Use
Digital Camcorder
the front
Using
tapes
a
a
DV
panel DV IN jack, it is possible to
digital camcorder and digitally transfer
DV
to DVD.
a
DV cable
(not supplied)
to connect the DV in/out
of your DV camcorder to the front
of this recorder.
jack
panel
DV IN
jack
Note:
This
It is
jack is for connection to DV digital camcorder only.
not compatible with digital satellite tuners or D-VHS
video decks.
Jack
panel of Accessory Component
(VCR, Camcorder, etc.)
S-VIDEO
OUTPUT
DV
Digital
AUDIO
OUTPUT
DV
IN/OUT
R
OR
L
VIDEO
OUTPUT
OR
1
Rear of
the recorder
1
Front of
the recorder
Front of the recorder
16
Camcorder
Pre-operation Setup
Initial
In this
General
Settings
system, there
menu
several ways to cusMost menus consist of
Auto
are
tomize the
settings provided.
three levels to set up the options, but some require
greater depth for the variety of settings. If you press
SETUP, only the first and second level of the menu system will appear
on
the TV
to
help
To
see
"B"
The third level
can
be
B. For
displayed by pressing
els, you will
screen.
the
on
navigating the menu levright side of the menu label
Programming
This DVD Recorder is
synthesized
tuner
equipped with a frequency
capable of receiving up to 88 TV
channels.
Preparation:
Connect the DVD Recorder to the desired
ial,
as
shown in
Connecting
to the Aerial
type of
on
aer-
page 13.
you go to the next level.
up and exit the Menu:
Press SETUP to bring up the menu. A second press of
SETUP will take you back to initial screen.
bring
To go to the next level:
Press B on the remote control.
To go back to the previous level:
Press b on the remote control.
General
1
2
1
Operation
2
Press SETUP.
The
Setup
menu
appears.
Use v / V to select the desired
While the desired item is
3
4
5
6 press
move
move
selected, press B
setting
Press SETUP to exit the
Setup
menu.
menu
appears.
Use v / V to select the General
3
4 option.
5
6
option
option.
is selected, press B to
to the second level.
Use v / V to select the Auto
Press B to
move
"Start" icon is
Programming
to the third level.
highlighted.
Press ENTER to
begin the channel search.
The tuner will automatically cycle through all
available channels in the area and place them
then
ENTER to confirm your selection.
Some items require additional steps.
7
to
option.
to the third level.
Use v / V to select the desired
Setup
move
to the second level.
Press B to
The
While the General
option.
Use v / V to select the second desired
Press SETUP.
in
the tuner's memory.
Note :
After you have connected your DVD recorder for the
very first time. If you press SETUP for initial setting, you
can only set the "Auto Programming" option. Then you
can
set the other
options.
17
DVRHOKUP
Pre-operation Setup (Continued)
Program
Edit
You
a
can
move,
edit
8
channel
manually (add, delete,
etc.).
The
Setup
menu
You
appears.
While the General
3
4 press
move
option
nels
option.
B to
move
"Edit" icon is
Edit
perform
manually.
can
is selected, press B to
Edit
option
search to select and store TV chan-
program on the Program List
menu then press ENTER.
Program List options appears on the left side of the
Program
Program
a
1. Use v / V to select
to the second level.
Use v / V to select the
Program
menu.
Program
Use v / V to select the General
2
List
to exit
(O) repeatedly
name,
Press SETUP.
1
Press RETURN
List
a
menu.
then
to the third level.
2. Use v / V to select
'Program
Edit'
option
from the
options then press ENTER.
Program Edit menu appears.
highlighted.
3.Useb/Btoselecttheitemandpressv/Vto
change the setting.
[PR]
List
position.
[Seek] Searches for a channel automatically.
Searching stops when the recorder tunes in a
Press ENTER.
5 Program
indicates the selected programme
menu
channel.
appears.
6Usev/VtoselectaPRnumberthenpress
ENTER.
Program List options
menu display.
appears
on
the left side of the
[Ch.] Changes
[MFT] Fine
picture.
the channel number.
tunes the channel to obtain
a
clearer
4. Choose OK then press ENTER to confirm the
and returns to the Program List menu.
7
Use v / V to select
an
option
then press ENTER
to confirm.
Program
Edit: Edits the selected program.
Station Rename: Edits the station
Move: Moves the
program's
name.
location
on
the
program list.
Delete: Deletes the program from program list.
18
setting
Pre-operation Setup (Continued)
Edit
Program
Sorting
(Continued)
You
Station Rename
You
up to 5 characters
Names
independently.
be
can
long.
1. Use v / V to select
program on the Program List
menu then press ENTER.
Program List options appears on the left side of the
Program
List
sort the
manually
program's position
on
the
Program
List
menu.
stations
can name
can
TV channels
a
menu.
1. Use v / V to select
program on the Program List
menu then press ENTER.
Program List options appears on the left side of the
Program
Program List options then
Keyboard menu appears.
option
from
press ENTER.
menu.
2. Use v / V to select 'Move'
options
2. Use v / V to select 'Station Rename'
List
a
option
from
Program
List
then press ENTER.
3. Use v / V to select
a
desired
position
then press
ENTER to store.
Deleting
You
can
a
program
delete
a
program
1. Use v / V to select
on
the
Program
List
menu.
program on the Program List
menu then press ENTER.
Program List options appears on the left side of the
Program
List
a
menu.
2. Use v / V to select 'Delete'
options
3. Enter
a name
then press ENTER.
option from Program List
The Program is deleted.
for the station. Use vVbBto select
character then press ENTER to confirm your selection.
a
Alphabet Capital:
?
case
?A
upper
Small: Switches the
keyboard
to lower
characters.
Symbol:
?
keyboard
characters.
lphabet
case
Switches the
Switches the
keyboard
to
symbol
char-
acters.
?
OK: Select to finish.
?
Cancel: Select to exit the
space at the cursor position.
Delete: Deletes the previous character at the
Space:
?
?
cursor
Inserts
menu.
position.
b / B: Moves
?
a
cursor
to left
or
right.
Tip
Remote control buttons for
Numbers
ing
(0~9): Enters
location
on
entering
a name
the character of
correspond-
the selected column.
4. Choose 'OK' icon then press ENTER to fix the
and returns to the Program List menu.
name
19
DVRSETUP
Pre-operation Setup (Continued)
Clock Set
1
2
3
4
5
6
Display
Press SETUP.
The
Setup
menu
Display
Use v / V to select the General
Moves the
cursor
to the
previous
next column.
(up/down): Changes
cursor position.
the
setting
at the current
Press ENTER to confirm your setting, then
press SETUP to exit the Setup menu.
TV
Aspect
You
can
can
works
only
when the TV
Aspect
choose:
Letter Box:
Pan Scan:
option.
Enter the necessary information for date and
time.
(left/right):
setting
picture with bands on the
upper and lower portions of the screen.
Automatically displays the wide picture on
the entire screen and cuts off the portions
Displays
a
wide
that do not fit.
to the third level.
move
v / V
-
-
to the second level.
Press B to
or
-
is selected, press B to
option
Use v / V to select the Clock Set
b / B
7
You
menu.
-
move
Mode
Ratio is set to "4:3".
appears.
While the General
Mode
Progressive Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks, but are connecting the
recorder to a standard (analog) television, set
Progressive Scan to [OFF].
If you are using the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks for connection to a TV or
monitor that is compatible with a progressive scan
signal, set Progressive Scan to [ON].
Ratio
choose:
4:3:
Select when
a
standard 4:3 TV is connected.
16:9:
Select when
a
16:9 wide TV is connected.
Caution
Once the
setting for Progressive Scan output is entered,
an image will only be visible on a Progressive Scan
compatible TV or monitor. If you set Progressive Scan
to [ON] in error, you must reset the recorder. First,
remove the disc in the recorder. Next, press STOP (x)
and hold it for five seconds before releasing it. The
video output will be restored to the standard setting,
and a picture will once again be visible on a conventional analog TV or monitor.
20
Pre-operation Setup (Continued)
PBC
Language
The PBC
(PBC)
-
ON:
setting
to ON
or
can
be
changed.
Set
Playback
Control
OFF.
Video CDs with PBC
are
to the
played according
PBC.
-
Select
a
language
for the
Setup
menu
and
on-screen
display.
OFF: Video CDs with PBC
as
Display Language
are
played
the
same
DVRSETUP
way
Audio CDs.
Disc
Select
Language
a
language
for the disc's
Menu, Audio, and
Subtitle.
[Original]Refers
Factory
disc
Set
If you need to, you can reset the Recorder to all its factory settings. Select ''Set'' icon then press ENTER.
Note :
Some
Area
options
Code)
cannot be reset.
(Rating, Password,
and
was
to the
original language
in which the
recorded.
language, press number
buttons then ENTER to enter the corresponding
4-digit number according to the language code list in
the reference chapter (see page 52). If you enter the
wrong language code, press CLEAR.
[Other]
[Off](for
To select another
Disc
Subtitle)
:
Turn off Subtitle.
21
Pre-operation Setup (Continued)
DRC
Audio
(Dynamic Range Control)
With the DVD
Each DVD disc has
Set the recorder's
audio
system you
Dolby Digital
variety of audio output options.
Audio Output according to the type
a
of
use.
/ DTS / MPEG
Select "Bitstream" if you connect the
recorder's DIGITAL AUDIO OUT jack to an amplifier
program's soundtrack in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing clarity of sound. Set
DRC to [ON] for this effect.
format, you
can
hear
a
[Bitstream]:
or
other
equipment
with
a
Dolby Digital,
DTS
or
Set Vocal to
MPEG decoder.
[PCM] (for Dolby Digital
nected to
a
encoded in
cally
two-channel
Dolby Digital
/
MPEG): Select when condigital stereo amplifier. DVDs
or
MPEG will be automati-
downmixed to two-channel PCM audio.
[Off] (for DTS): If you select "Off", the DTS signal
not output through the DIGITAL OUT jack.
is
Sampling Frequency
If your receiver or amplifier is NOT capable of handling
96 kHz signals, select [48 kHz]. When this choice is
made, this unit will automatically convert any 96 kHz
signals to 48 kHz so your system can decode them.
If your receiver or amplifier is capable of handling
96 kHz signals, select [96 kHz]. When this choice is
made, this unit will pass each type of signal through
without any further
22
processing.
Vocal
DVD is
[ON] only when a multi-channel karaoke
playing. The karaoke channels on the disc will
mix into normal stereo sound.
Pre-operation Setup (Continued)
Lock
If you
(Parental Control)
If you
your password, to clear the current password, follow the procedure below.
Set Password
Changing
the
code
forget your 4-digit
4-digit
forget
1. Press SETUP to
code
display
the
Setup
menu.
2. Use the Number buttons to enter the
number
6-digit
"210499".
3. Select "Ok" then press ENTER. The 4-digit
is cleared. Enter a new code as shown left.
password
Rating
Movies
DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
on
information that
certain
1
2
3
4
5
6
Press SETUP.
The
Setup
menu
While the Lock
move
Ratings
option.
is selected, press B to
to the second level.
option
Use v / V to select the Set Password
Press B to
move
password yet;
using the numbered buttons to create a personal 4-digit security password,
then press ENTER. Enter the 4-digit password again
and press ENTER to verify when "OK" is highlighted.
If you have already entered a password;
Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security password, then press ENTER when "OK" is highlighted.
repeatedly
mistake before
to delete
9
While
pressing ENTER,
password numbers one by
press b
one
is selected, press ENTER.
If you select "Delete" then press ENTER. The password is deleted.
Enter
"Change"
alternate
1
2
Follow
steps 1-3
repeatedly
to delete
being played
played with
shown above to the left
(Set
Rating option.
to the third level.
move
6 as shown above to the left
Eight (8)
has the least
has the most
restrictions.
restrictions.
playback
No limit: If you select No limit, Parental Control is
not active. The disc will play in full.
Level 1 to 8: Some discs contain
scenes
not suit-
able for children. If you set a rating for the
Recorder, all disc scenes with the same rating
lower will be
4-digit password again
to verify when "OK" is highlighted.
pressing ENTER, press
password numbers one by
as
Use v / V to select the
tons. One
and press
mistake before
The Parental Control
Password).
played
played. Higher rated
unless
an
alternate
disc. The alternate
ing
a
rated
scenes.
Follow
Tip
If you
to
3
step
(Set
4 Password).
5Selectaratingfrom1to8usingthev/Vbut(1)
playback
4-digit password using the numbered
buttons to create a personal 4-digit security
password then press ENTER when "OK" is
highlighted.
ENTER
scenes are
feature allows you to prevent discs from
by your children or to have certain discs
a
Enter the
or
a
then correct it.
8
country-dependent.
are
Press B to
a
the disc. These
disc
to the third level.
If you have not entered
Enter a 4-digit password
If you make
complete
option.
Tip
7
scenes on
to the
from Level 1 to 8, and alternatively, more suitable
scenes are available for selection on some discs.
appears.
Use v / V to select the Lock
applies
or a
lower
one.
scene
If
no
scene
one
password
the
is available
suitable alternate
found, playback will stop. You
change
will not be
on
the
must have the same rat-
b
or
scenes
or
scene
must enter the
rating
level in order
is
4-digit
to play
the disc.
then correct it.
6
Press ENTER to confirm your rating selection,
then press SETUP to exit the menu.
23
DVRSETUP
Pre-operation Setup (Continued)
Area Code
DivX(R)
Enter the code of
a
country/area
used to rate the DVD video
(See
"Area
whose standards
disc, referring
were
to the list
Codes", page 52.).
VOD
DivX
We
provide you the DivX VOD (Video On Demand)
registration code that allows you to rent and purchase
videos using the DivX
VOD service. For more information, visit www.divx.com/vod.
1.
Select
2.
Press ENTER while
[DivX(R) VOD] option
then press B.
is selected and the reg-
[Enter]
istration code will appear.
1
2
3
4
5
6
Press SETUP.
The
Setup
menu
appears.
Use v / V to select the Lock
While the Lock
move
option.
is selected, press B to
to the second level.
option
Use v / V to select the Area Code
3.
Use the
videos from DivX
option.
code to
registration
move
a
Tip
a
mistake before
repeatedly
to delete
pressing ENTER, press
password numbers one by
b
one
then correct it.
7
Select the first character
8
Shift the
9
Press ENTER to confirm your area code selection, then press SETUP to exit the menu.
using
the v / V
buttons.
second
24
using B buttons and select
character using v / V buttons.
cursor
a
disc for
playback
on
this
unit.
password yet;
using the numbered buttons to create a personal 4-digit security password,
then press ENTER. Enter the 4-digit password again
and press ENTER to verify when "OK" is highlighted.
If you have already entered a password;
Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security password, then press ENTER when "OK" is highlighted.
If you
rent the
www.divx.com/vod. Follow the instructions and
to the third level.
If you have not entered
Enter a 4-digit password
or
VOD service at
download the video onto
Press B to
purchase
the
Note:
All the downloaded videos from DivX
be
played
back
on
this unit.
VOD
can
only
Pre-operation Setup (Continued)
Recording
Auto
Record Mode Set
When
You
10
minutes,
es
automatic
recording, chapter markers are put in at the
specified interval. You can set this interval to 5 minutes,
picture quality for recording; HQ (High
Quality), SQ (Standard Quality), LQ (Low Quality), EQ
(Extend Quality).
can
set the
Record
Aspect
When
recording,
4:3
standard).
Chapter
or
15 minutes. If you select
chapter marking off,
no
None, it switch-
separations.
DVRSETUP
Ratio
you can set the recording aspect ratio
to suit the material you're recording (16:9 widescreen,
or
DV Record Audio
You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV IN
port.
Some
digital
camcorders have two stereo tracks for
audio. One is recorded at the time of
shooting;
the other
is for
over-dubbing after shooting.
On the Audio 1 setting, the sound that was recorded
while shooting is used.
On the Audio 2 setting, the over-dubbed sound is used.
25
Pre-operation Setup (Continued)
Disc
Caution
If you want to change the disc format,
recorded on the disc will be erased.
Initialize
If you load a completely blank disc, the "Initialize"
will appear. Select "Ok" then press ENTER. The
menu
Recorder will initialize the disc.
Disc Protect
DVD-R: The Recorder initializes the disc for Video
When
mode. The
matted DVD-RW
recording
mode will
always
be Video
mode.
DVD-RW: The Recorder initializes the disc for VR
mode.
(DL)
/ DVD+RW: The Recorder initializes the
disc.
Also, you
can
format the disc from the
Setup
menu as
below.
1
2
Press SETUP.
The
Setup
menu
appears.
Use v / V to select the Disc
While the Disc
move
option.
is selected, press B to
to the second level.
option
3
4
5
highlighted.
6
DVD-RWs,
7 (DVD-VR DVD-Video)
Use v / V to select the Initialize
Press B to
move
option.
to the third level.
"Start" icon is
Press ENTER.
Initialize
menu
For
appears.
use b
/ B to select
a
mode
then press ENTER.
For DVD+RWs, go to step 8.
or
8
Use b / B to select "Ok" then press ENTER.
It takes a few moments to format the disc.
26
recording
in DVD+RW / +R disc
disc,
set to ON to
or
VR mode for-
prevent accidental
of the disc loaded. If you
need to unlock the disc to make edits, select OFF.
recording, editing
DVD+R
everything
or
deleting
Pre-operation Setup (Continued)
Finalize
Disc Label
Finalizing 'fixes' the recordings in place so that the disc
can be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu for
navigating the disc. This is accessed by pressing
Use this to enter
MENU/LIST
or
TITLE.
for the disc. This
a name
name
appears when you load the disc and when you
disc information on-screen.
?
?
The disc
display
be up to 32 characters long.
For discs formatted on a different DVD Recorder, you
will see only a limited number of characters.
name can
Caution
After
you've
DVD-RW,
record
finalized
a
DVD+R
or a
anything
else
disc
recording
on a
DVD-R,
you can't edit
that disc except on a
(DL) disc,
on
or
DVD+RW disc.
Follow
1
steps 1-3
shown Initialize
as
Use v / V to select the Disc Label
2
3
4 Keyboard
Press B to
1
2
3
4
Follow
steps 1-3
as
shown
on
page 26
"Edit" icon is
(Initialize).
Press B to
move
option.
option.
to the third level.
highlighted.
menu
appears.
to the third level.
highlighted.
Press ENTER.
Finalize
menu
appears.
5
5
page 26.
Press ENTER.
Use v / V to select the Finalize
Finalize is
move
on
Select "Ok" then press ENTER.
The recorder starts
finalizing
?
the disc.
?
long
finalization takes
how much is recorded
titles
on
the disc. A
4 minutes
or more
on
depends
the
heavily
disc,
on
the
type
of
disc,
?
can
for the disc. Use vVbBto select
character then press ENTER to confirm your
selection.
a
Alphabet Capital:
case
Alphabet
case
and the number of
recorded disc
a name
upper
Note :
How
Enter
Switches the
Small: Switches the
?
to finalize.
Tip
?
If you load a DVD-RW that has already been finalized,
you can 'unfinalize' it by choosing Unfinalize from the
After
doing this,
you
can
edit and
keyboard
to lower
characters.
Symbols:
Switches the
keyboard
to
symbol
char-
acters.
take up to
?
menu.
to
characters.
OK: Select to finish.
?C ancel: Select to exit the
Finalize
keyboard
space at the cursor position.
Delete: Deletes the previous character at the
Space:
cursor
?
re-
Inserts
menu.
a
position.
b / B: Moves
cursor
to left
or
right.
record onto the disc.
6
Choose OK then press ENTER to
and return to the Setup menu.
7
Press SETUP to exit the
save
the
name
menu.
27
DVRSETUP
Pre-operation Setup (Continued)
Overview for the On-Screen
This manual
Disc Information On-screen
Display
You
operating the
DVD Recorder. Some DVDs require specific operation
or allow only limited operation during playback. When
this occurs, the symbol
appears on the TV screen,
indicating that the operation is not permitted by the DVD
loaded
Recorder
2
or
gives
is not available
Displaying
on
viewing
display the
1
the disc.
Information While
While
to
basic instructions for
can
Watching
TV
the TV channels, press ENTER
information displayed on-screen.
Indicates channel
Display
various information about the disc
display
on-screen.
Press DISPLAY
information
To
repeatedly to display/change
displayed on-screen.
the
the On-Screen
Display, press
DISPLAY repeatedly until it disappears.
See the descriptions on the following pages for
detailed explanations of displays as a disc is
playing.
remove
Recorder Status Icon
number, station
Resume
name, and audio signal (STEREO,
MONO) received by the tuner.
Action
play
Displays
from this
prohibited
or
point
not available
PR-06
STEREO
Notes :
ABC
Some discs may not provide all of the features on the
On-Screen Display, examples shown the below.
If
no
button is
Display
01/01/2005
will
pressed
disappear.
for 10
seconds, the On-Screen
13:35
Indicates current date and time.
DVD
Menu
VR
Video
+RW
+R
Function (Use v / V to select desired option)
Options
Title Number
1/6
Chapter
Number
4/26
Time Search
00:10:30
Audio
Language
(DVD only) and Digital
Audio Output Mode
Subtitle
Language
Angle
D
2CH
ABC
OFF
NORM
Selection Method
Shows the current title number and total number of
titles, and skips to the desired title number.
b/B,or
Numbers, ENTER
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
b/B,or
Numbers, ENTER
Shows the elapsed playing time, and
searches the
point by
the
elapsed
time
directly.
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes
1/3
Sound
DivX
the
the
b/B
setting.
Shows the current subtitles language, and
changes
Numbers, ENTER
b/B
setting.
Shows the current angle number, total number of
angles, and changes the angle number.
b/B
Shows the current sound mode, and
b/B
changes
the
setting.
VCD
Menu
Function (Use v / V to select desired option)
Options
Track Number
1/6
Time
00:10:30
Shows the current track number and total number of tracks
or PBC On mode, and skip to the desired track number.
Shows the elapsed playing time, and
searches the
Audio Channel
Sound
28
Stereo
NORM
point by
the
elapsed
time
Shows the audio channel, and
changes
the audio channel.
Shows the current sound mode, and
changes
the
setting.
directly.
Selection Method
b/B,or
Numbers, ENTER
Numbers, ENTER
b/B
b/B
DVD and Video CD
DVD
Video CD
or
Operation
General Features
Playback
Playback Setup
Turn the TV
on
Note :
and select the video
input
source con-
nected to the DVD Recorder.
Audio
the
System: Turn the Audio System on and select
input source connected to the DVD Recorder.
Unless stated
otherwise, all operations described
use
the Remote Control. Some features may also be available on the Setup menu.
TITLE Selection
1
2
3
Press OPEN/CLOSE
(Z)
to open the disc
tray.
DVD
If
Load your chosen disc in the tray, with the
playback side down.
Press OPEN/CLOSE
READING appears
starts
playback
start, press N
In
some
on
(Z)
cases, the disc
does not
playback
might
menu
menu
displayed
may be displayed first after
Video CD that contains a menu.
loading
DVD
a
or
DVD
Use the bBvVbuttons to select the
want to
view, then press ENTER
Press TITLE
or
can move
to
follows:
use
v / V to select the title
Then, press the appropriate numbered button
(0-9)
or
b / B to select
a
title number.
a
title
on a
to
title/chapter
start playback.
MENU/LIST to return to the
disc has
more
than
one
chapter/track,
you
chapter/track as follows:
Press SKIP (. or >) briefly during playback to
select the next chapter/track or to return to the beginning of the current chapter/track.
Press SKIP (.) twice briefly to step back to the
previous chapter/track.
To go directly to any chapter/track during playback,
press DISPLAY. Then, use v / V to select chapter
icon (or for a Video CD, select track icon). Then, enter
the chapter/track number using the numbered buttons
(0-9) or press b / B.
Tip
A
title, you
appear
If
is
one
icon.
can move
a menu
as
than
+R
CHAPTER/TRACK Selection
instead.
If
more
+RW
Press DISPLAY then
tray.
the display window, and
If
disc has
another title
to close the
automatically.
(PLAY).
a
VR
Video
you
menu
display.
to another
VCD
Use the number buttons to select the track you want
to view.
Press RETURN
(O)
to return to the
display.
Menu setting and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions
on
each
menu
Setup
2.
Press SCAN
(m
or
M) during playback.
(m
required speed.
or
M) repeatedly
3.
If Parental Control is set and the disc is not within the
the
4-digit
To exit SEARCH
page 23).
DVDs may have a Region Code.
Your recorder will not play discs that have
(see
on
code different from your recorder. The
this Recorder is 4 (four).
2.
region
region code
mode, press PLAY.
Frame-by-Frame Playback
1. Press PAUSE/STEP
code must
be entered and/or the disc must be authorized
to select the
DVD, DivX; 4 steps (forward and backward)
Video CD; 3 steps (forward and backward)
Still Picture and
Rating settings (not authorized),
--
Press SCAN
menu.
Notes :
"Rating",
1.
menu screen.
You may also set PBC to OFF in the
See page 21.
--
Search
(X)
on
the remote control dur-
ing playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP (X) repeatedly.
To exit PAUSE mode, press N (PLAY).
a
for
29
PLAYBCK
DVD and Video CD
General Features
Operation (Continued)
Time Search
(Continued)
The Time Search function allows you to start
at any chosen time on the disc.
Slow Motion
1. Press PAUSE/STEP
(X) during playback.
1. Press DISPLAY
The Recorder will enter PAUSE mode.
2. Press SCAN
(m
M) during
or
(m
or
appears on the TV screen.
The Time Search box shows the elapsed
PAUSE mode.
to select the
M)
required
2. Within 10
steps (forward and backward)
4 steps (forward only)
Video CD; 3 steps (forward only)
4. To exit Slow Motion mode, press N (PLAY).
The "--:--:--"
3. Within 10
the
Note :
playback
in
reverse
is not
4
Repeat
-
the current
Title:
current title
repeats the
Off: does not
repeat mode.
chapter.
Repeat
-
a
Track/All/Off
desired
repeat
the
or
in the
(DivX disc).
does not play repeatedly.
To
repeat
menu
to
PBC, you
use
the
Repeat
function. See page
an
seconds, press ENTER
to confirm the start
a
VR
Video
+RW
on
+R
during playback
or
still
Each press of the ZOOM button
the sequence shown below.
→
x4 size
→
3. To
the disc.
VCD
playback
to acti-
the TV
display
a
title:
at your chosen
icon and 'A-B' appears
screen.
ending point.
on
the TV screen, and
repeat sequence begins.
repeatedly
to
in
normal size
move
through
the
picture.
resume
ZOOM
changes
normal
repeatedly
press CLEAR or press
until the normal picture appears.
playback,
The Zoom function may not work for
sequence in
again
starts from the selected time
Note :
3. To cancel the sequence, press A-B
select Off.
30
Within 3
must set PBC to OFF in
A-B
2. Press A-B
the
invalid time.
not enter
can
in the box.
2. Use the bBvVbuttons to
1. Press A-B at your chosen starting point.
Repeat icon and 'A-' appears on the TV
Repeat
You
x2 size
21.
Repeat
right
zoomed
Video CD with
Setup
hours, minutes, and
vate the Zoom function.
Note :
a
the number buttons to enter
start time. Enter
1. Press ZOOM
mode.
repeats the current track.
All: repeats the all tracks on the Video CD
On
use
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
Track:
Off:
appears in the Time Search box.
seconds from left to
DVD
.
folder
?
Display.
Zoom
play repeatedly.
Press REPEAT to select
?
desired
a
Chapter: repeats
Video CDs, DivX
?
display
seconds,
required
Playback
Repeat Chapter/Title/Off
Press REPEAT to select
?
v / V to select the Time
time.
DVD Discs
?
use
If you enter the wrong numbers, press CLEAR. Then
enter the correct numbers.
with
possible
Video CDs.
?
seconds,
Search icon in the On-Screen
4
Slow motion
playing
time of the current disc.
speed.
DVD;
DivX;
The On-Screen
during playback.
Display
The DVD Recorder will enter SLOW mode.
3. Use the SCAN
playback
some
DVDs.
DVD and Video CD
General Features
Operation (Continued)
(Continued)
Camera
Marker Search
You
nine
can
points
To enter
1.
start
playback
from
a
memorized
point. Up
to
be memorized.
can
1. Press DISPLAY
During disc playback, press MARKER when
playback reaches the spot that you want to
2.
on
the TV
briefly.
points
Display.
3. Use b / B to select the desired
on a
The number of the current
disc.
angle.
angle appears
on
the TV
screen.
To Recall
or
1.
disc
Clear
Marked Scene
a
Changing
press SEARCH.
The Marker Search menu will appear on the TV
During
playback,
2. Within 10
seconds,
use
b / B to select the marker
number that you want to recall or clear.
3. Press ENTER and playback starts from the marked
Or,
scene.
the Audio Soundtrack
Press CLEAR and the marker number is
audio soundtrack if available.
Note :
Some discs feature both
tracks. There is
erased from the list.
play any marker
the marker search menu.
can
by inputting
its number
on
Recorder to
the Contents of DVD Video
Discs: Menus
no
Dolby Digital and DTS soundanalog audio output when DTS is
selected. To listen to the DTS
a
soundtrack,
DTS decoder via
puts. See page
Reviewing
DVD
Press AUDIO then press b / B repeatedly during playback to hear a different audio language (DVD only) or
screen.
4. You
The On-Screen
appears on the TV screen.
2. Use v / V to select the Angle icon in the On-Screen
screen
1 to enter up to nine Marker
Repeat step
during playback.
Display
memorize.
The Marker icon will appear
If the disc contains sequences recorded from different
camera angles, the angle icon appears briefly on the TV
screen. You can then change the camera angle if you
wish.
mark, follow these steps.
a
Angle
DVD
one
of the
connect this
digital
out-
15 for connection details.
Audio Channel Selection
Video
VR
+RW
+R
VCD
DVDs may contain menus that allow you to access
special features. To open the disc menu, press
MENU/LIST. Then, press the appropriate number button
Press AUDIO then press b / B repeatedly during playback to hear a different audio channel (STEREO, LEFT
to select
an
or
highlight
your selection, then press ENTER.
option. Or,
use
the bBvVbuttons to
RIGHT).
With DVD-RW discs recorded in VR mode that have
both
Title Menu
Bilingual audio channel, you can
switch among Main (L), Sub (R), Main+sub (L+R), or
Mono by pressing AUDIO.
DVD
a
main and
a
1. Press TITLE.
If the current title has
on
the TV
menu, the menu will appear
Otherwise, the disc menu may
screen.
a
appear.
2. The
may contain camera
guage and subtitle options, and
menu
Disc Menu
angles, spoken lanchapters for the title.
DVD
1. Press MENU/LIST.
The disc
2. To
menu
remove
is
displayed.
the disc menu, press MENU/LIST
again.
31
PLAYBCK
DVD and Video CD
Operation (Continued)
3D Surround
This unit
can
PIP
produce
3D Surround
a
playback
conventional stereo
instead of the five
speakers,
speakers normally required
more
channel audio from
1. Press DISPLAY
a
DVD
effect, which
simulates multi-channel audio
VR
Video
+RW
+R
VCD
from two
This function enables you to view the stored stations in
the sub picture during playback.
or
to listen to multi-
Home Theater
(Picture-in-Picture)
System.
The On-Screen
during playback.
appears on the TV screen.
2. Use v / V to select the Sound icon in the On-Screen
Display
Display.
3.Useb/Btoselect"3DSUR".
To turn off the 3D Surround
Subtitles
DVD
effect, select "NORM".
DivX
Press SUBTITLE then press b / B repeatedly during
playback to see the different subtitle languages.
Instant
DVD
Skip
Video
PIP On and Off
Turning
Press PIP to switch
VR
+RW
Each press INSTANT SKIP
skips
+R
again
VCD
forward 15 seconds.
Input
on
the sub
picture,
press PIP
to switch it off.
source
selection for sub
picture
Press AV to select the
Note :
If
appears, the feature is not available
on
the disc.
input source for the sub picture. Each time AV is pressed, each input source
available for the sub picture is displayed as shown
below.
Last Condition
Memory
This Recorder memorizes the
user
Tuner→AV1→AV2→DV
DVD
settings
for the last
disc that you have viewed. Settings remain in memory
even if you remove the disc from the Recorder or switch
off the Recorder. If you load a disc that had its settings
memorized, the latest stop position is automatically
recalled.
--
stored in memory for use any time.
This Recorder does not memorize settings for a disc
Settings
are
if you switch off the Recorder before
play the disc.
32
Use PR
selection for sub
(v
/
commencing
to
picture
the program if sub picture's
is Tuner. The selected program number
V)
input source
is displayed on
to
change
the TV
selected program
Sub
Notes :
--
Program
screen.
by pressing
You
display
(x).
can
STOP
picture position change
Press b / B repeatedly until desired position is
achieved. The sub picture moves clockwise or
counterclockwise.
the
Playing
DivX Movie Disc
a
this DVD Recorder you can play back DivX files
the CD-R/RW or DVD±R/RW. Before playing DivX
Using
on
files, read "About DivX movie files"
on
the
Press SETUP. The
2.
Press
select
right.
Setup menu appears.
SETUP b [LANGUAGE] b [Disc Subtitle]
the language you have found.
Refer to "Disc Menu/Audio/Subtitle"
Insert
1
a
disc and close the
The MOVIE
menu
appears
tray.
the TV
on
on
then
page 21.
Tip:
screen.
If the subtitle still does not
display properly
after the
proceeded, press and hold SUBTITLE about
3 seconds during playback.
The new language code number selected is displayed
on upper-right of the TV screen.
steps
1-2
code
Language
for
change sequency
Hungarian,
Czech and Polish:
LANGUAGE 1
code
Language
LANGUAGE 1
Press v / V to select
2
on
the remote to
and
highlight
press ENTER.
Press STOP to exit.
DivX disc
LANGUAGE 2
b
LANGUAGE 3
compatibility
with this recorder is limited
follows:
?A vailable resolution size of the DivX file is under
720x576
?
The file
(W
x
name
H) pixel.
of the DivX subtitle is available
by
47
characters.
Tip:
On
?
disc with mixed content
a
and DivX
Then,
(MP3/WMA, JPEG,
you can select menu screen. Press
word on top on the menu is highlighted.
files),
TITLE and
a
b / B to select
use
MP3/WMA, JPEG,
MOVIE then press ENTER.
You can view TV channel or video
pressing
RETURN
input
Notice for
displaying
title does not
Find
a
subtitle
following notice
display properly.
suitable Disc Subtitle
on
the
Disc Subtitle
figure
Original, English
English
French, German,
Italian, Spanish,
French, German, Italian,
Spanish, Portuguese
Portuguese
Dutch, Swedish
Russian
Russian
Other 6976
Greek
Other 7665
Polish, Hungarian, Czech
Other 8482
Turkish
frame is
screen
not
the
on
over
30 per 1
operate normally.
If the video and audio structure of recorded file is not
or
audio is
outputted.
?
Playable
?
Playable DivX subtitle: ".smi", ".srt",
".sub (Micro DVD, Subviewer 1-2 format only)",
".txt (Micro DVD, T1-4 format only)"
?
file,
display.
This recorder does not
below.
Language
If the number of the
played
Available DivX Subtitle
mark
_
DivX file:
Divx subtitle
for the DivX
"
?
when the DivX sub-
language
to express in the DivX
"
interleaved, either video
the DivX subtitle
Please refer to
impossible code
displayed as
second, this unit may
by
If you want to return to the
(O).
?
?
source
If there is
it may be
or
menu, press MENU/LIST.
1.
for Russian:
change sequency
About DivX movie files
as
If you want to view a particular file, press v / V to
highlight a file and press ENTER or PLAY.
3
4
b
LANGUAGE 2
folder, and press ENTER.
a
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use
v / V buttons
b
on
Playable
support GMC.
".avi", ".divx"
except those listed above is
the TV
not dis-
screen.
Codec format:
"DIVX3.xx", "DIVX4.xx",
"DIVX5.xx", "XVID ", "3IVX".
?
Playable Audio format: "Dolby Digital", "PCM", "MP3",
"DTS (DIGITAL OUT only)"
?
Sampling frequency:
?
Bit rate: within 32
-
within 8
-
48 kHz
(MP3)
320kbps (MP3)
33
PLAYBCK
Audio CD and MP3/WMA
Playing
file
Audio CD
an
MP3
CD
or
Operation
MP3/WMA
WMA
Notes
MP3/WMA
on
MP3 / WMA disc
Using this DVD Recorder you can play back MP3/WMA
files on the CD-R/RW or DVD±R/RW. Before playing
ited
?
as
Recordings
compatibility
with this
player
is lim-
follows:
within 32
48 kHz (MP3),
Sampling frequency:
32 48kHz (WMA)
Bit rate: within 32 320kbps (MP3),
32
192kbps (WMA)
-
within
-
MP3/WMA
on
the
files, read "Notes
on
MP3/WMA
Recordings"
right.
?
-
-
?
Audio CD
a
Once you insert an audio CD
screen. Press v / V to select
N
(PLAY)
The recorder cannot read
ENTER and
or
a menu
a
on
appears
track then press
playback
TV
file extension other than
MP3/WMA file that has
an
".mp3"
/ ".wma".
?
CD-R
?
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
starts.
physical
impossible
mend that
an
?
playback MP3 / WMA files. We recomyou use Easy-CD Creator, which creates
to
ISO 9660 file
File
names
must
?
format should be ISO 9660
They
system.
should have
incorporate
should not
a
maximum of 8 letters and
.mp3 or .wma extension.
contain special letters such as
an
/ ?
*
"<>letc.
?
The total number of files
on
the disc should be less
than 999.
This DVD recorder
requires
discs and
recordings
to
meet certain technical standards in order to achieve
MP3 / WMA
1.
Press v / V to select
see
2.
folder, and press ENTER
to
the folder contents.
Press v / V to select
or
a
ENTER.
Playback
a
track then press N
(PLAY)
optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R
containing MP3 or WMA files) and these require compatible playback.
Customers should note that
starts.
permission
is
required
in order to download MP3 / WMA files and music
from the Internet. Our company has no right to
grant such permission. Permission should always
be
Tips
If you
in
Folder
are
a
file list and want to return to the
and press
highlight
ENTER to return to the previous menu screen.
Pressandholdv/Vtogotothenext/previous
list,
use
the v/V to
page.
On a disc with mixed content
and DivX
you can select menu screen. Press
word on top on the menu is highlighted.
files),
TITLE and
Then,
(MP3/WMA, JPEG,
use
a
b / B to select
MP3/WMA, JPEG,
MOVIE then press ENTER.
You can view TV channel or video
pressing
RETURN
(O).
menu, press MENU/LIST.
34
input
or
source
by
If you want to return to the
sought
from the
copyright
owner.
:
Audio CD and MP3/WMA
Pause
MP3
CD
WMA
1. Press PAUSE/STEP
(X) during playback.
2. To return to
playback, press
PAUSE/STEP (X) again.
Track Selection
Press SKIP .
N
>
(PLAY)
MP3
CD
or
Operation (Continued)
or
press
PLAYBCK
WMA
briefly during
playback to go to the next track
beginning of the current track.
or
Press SKIP . twice
step back
briefly
to
to return to the
to the pre-
vious track.
On
an
Audio
CD,
track number
ing playback
to go
directly
to any
the numbered buttons
using
enter the
track,
(0-9)
dur-
the Track List.
on
Repeat Track/All/Off
MP3
CD
WMA
Press REPEAT to select
?
TRACK:
?
ALL
?
OFF
a
desired
repeat mode.
repeats the current track.
repeats the all tracks on the disc.
:
(No display):
Search
does not
play repeatedly.
CD
1. Press SCAN
(m
or
M) during playback.
The Recorder will enter SEARCH mode.
2. Press SCAN
(m
or
M)
to select the
required
(backward) or MX2,
speed: mX2, mX4, mX8
MX4, MX8 (forward).
Search speed and direction are
indicated
on
the
menu
display.
3. To exit SEARCH
Repeat
To
repeat
A-B
mode, press N (PLAY).
a
MP3
CD
sequence in
a
WMA
track:
1. Press A-B at your chosen starting point.
Repeat icon and 'A' appears on the menu
2. Press A-B
The
again at your
Repeat icon and 'A
screen, and the
chosen
-
ending point.
B' appears
on
the
Repeat
menu
repeat sequence begins.
3. To exit the sequence and return to normal
A-B again.
The
screen.
icon
disappears
from the
play,
press
menu screen.
35
Audio CD and MP3/WMA
Operation (Continued)
Repeat Programmed
Programmed Playback
The program function enables you to store your favorite
tracks from any disc in the recorder's memory. A program can contain 99 tracks (Audio CD) or 256 tracks
(MP3/WMA).
1.
2.
3.
Insert
a
1.
can
disc.
?
Audio CD
?
Select
a
track
"
Select
menu
appears.
the List.
on
icon then press ENTER to place the
selected track on the Program list. Repeat to place
You
can
""
a
disc. The
repeat icon
a
desired
repeat mode.
TRACK:
repeats the current track
ALL: repeats all the tracks on programmed list.
does not
Off(No display):
play repeatedly.
If you press SKIP (>) once during
back, the repeat playback cancels.
Erasing
add all tracks in the disc. Select
1.
icon then press ENTER.
previous
playing
Repeat
Track
page.
2.
a
Track from
Program
List
Use vVbBto select the track that you wish to
erase from the Program list.
Press CLEAR.
ENTER to
list.
Select
"
the
Or, select
erase
to
Repeat
Erasing
"
"
icon then press
the selected track on the Program
erase
additional tracks
Complete Program
on
the list.
List
", then press ENTER. The complete Program
for the disc is erased.
Note:
The programs
removed.
Example)
5.
Press N
(PLAY)
or
Audio CD
ENTER to start.
Playback
programmed the
in the order in which you
tracks. Playback stops after all of the tracks
begins
Program
36
list have
play-
the list.
Select the track you want to start playing on the
Program list. Press and hold v / V to move to the
next /
disc.
Note :
"
on
on a
Press REPEAT to select
?
MP3/WMA
track/all
a
Press REPEAT when
Audio CD and MP3/WMA Discs:
or
play
appears.
2.
additional tracks
4.
You
Tracks
played
once.
on
the
are
also cleared when the disc is
JPEG File
Viewing
Operation
JPEG file
a
Notes
Using this DVD Recorder you can view JPEG files on
the CD-R/RW or DVD±R/RW. Before playing JPEG
files,
read "Notes
Insert
1.
on
JPEG
Recordings"
disc and close the
a
appears
the TV
on
on
the
tray. The JPEG
?
on
JPEG
Recordings
upon the size and number of JPEG files, it
could take a long time for the DVD Recorder to read
Depending
the disc's contents. If you don't see an on-screen display after several minutes, some of the files may be
right.
menu
too
screen.
large
---
reduce the resolution of the JPEG files to
less than 5M
pixels
as
2760
x
2048
pixels
and burn
another disc.
?
The total number of files and folders
on
the disc
should be less than 999.
?
Some discs may be incompatible due to
recording format or the condition of disc.
?
Ensure that all the selected files have the
sions when
?
Press v / V to select
2.
a
folder, then press ENTER. A
list of files in the folder appears. If you are in
list and want to return to the previous Folder
the v / V buttons
on
the remote to
file
a
list,
use
different
".jpg"
exten-
layout.
If the files have
rename
?
into the CD
copying
a
File
names
be read
are
them
by
shown
".jpe" or ".jpeg" extensions, please
as ".jpg" file.
without
".jpg"
extension will not be able to
this DVD Recorder. Even
as
JPEG
image
though
files in Windows
the files
Explorer.
highlight
then press ENTER.
If you want to view a particular file, press
v / V to highlight a file then press ENTER
3.
N
(PLAY).
The selected
image
is
or
displayed
in full
screen.
Press ENTER to appear
To
4.
stop viewing
The
at any
menu screen
disappear
or
this
menu.
time, press STOP.
appears.
Tip:
?
If you
list,
are
use
in
file list and want to return to the Folder
the v/V to
return to the
?
a
and
highlight
previous menu screen.
press ENTER to
Pressandholdv/Vtogotothenext/previous
page.
?
On
disc with mixed content
a
DivX
files),
word
you
can
and
a
use
b / B to select
on
top
select
on
the
(MP3/WMA, JPEG,
Press TITLE
menu screen.
menu
is
and
highlighted. Then,
MP3/WMA, JPEG,
or
MOVIE then
press ENTER.
?Y
ou can
pressing
view TV channel
RETURN
(O).
or
video
input
source
by
If you want to return to the
menu, press MENU/LIST.
37
PLAYBCK
JPEG File
Slide Show
Use v V b B to
JPEG
Operation (Continued)
JPEG
the
highlight
(Slide Show)
then press ENTER.
Slide Show starts from the selected file if
?
move
There
>>
the
menu
is not II
to
on
While
(Off).
to the
are
four Slide
>
Speed options (
(Slow) and II (Off).
Use v V b B to
use
STOP
viewing a file, you can press
previous menu (JPEG menu).
(Normal),
Then,
Speed option
highlight
the
)
: >>>
Speed options (
option you want
b / B to select the
(Fast),
).
to
use
then press ENTER.
Still Picture
JPEG
Press PAUSE/STEP
1.
The recorder will
2.
during
slide show.
go into PAUSE mode.
now
To return to the slide
show, press N (PLAY)
press PAUSE/STEP
again.
to another File
Moving
JPEG
Press SKIP
cursor
viewing
to the next
a
(. or >) or
picture to advance
To rotate
Press v / V
during showing
Zoom
or
(b
B) once while
or previous file.
or
JPEG
picture
ture clockwise
or
a
picture
to rotate the
pic-
counter clockwise.
JPEG
Use ZOOM to
enlarge
the
photo image. (see
30
page)
To listen to music while slide show
simultaneously
You
can
display photo
music files recorded
Select
38
JPEG
files while
on a
listening
to MP3/WMA
disc.
icon then press ENTER
on
the JPEG
menu.
Basic
Basic
Recording
from TV channels
Recording
Follow the instructions below to record
Recording
starts
disc is full
or
Switch
1
TV program.
and continues until the
easily
a
recordable disc.
that the TV's
input source is set to
completely blank disc,
sure
this recorder. If you load a
the recorder takes a short while to initialize the disc.
2
3
Set
2
Follow
steps 1-4
from
TV
a
as
shown left
(Basic Recording
channels).
Press REC
(z) repeatedly to select the recording time length.
Recording starts after the first press. Each
additional press increases the recording time by
10 minutes within the available free space.
The recording time is displayed on the TV screen.
Use PR
At the end of the
(+/-)
buttons to select the TV channel to
can
Stereo
the DVD Recorder will
TV Audio Channel
select the audio channel
AUDIO
during viewing
channel is displayed
or mono
Bilingual
recording,
stop recording and shut off.
record.
rent audio
TV program. The
by
cur-
on-screen.
broadcast: Stereo
broadcast: Main+Sub
to listen
(language)
→
→
Left
Main
Right
→
→
Sub
If the sound is of poor quality when set to
can often improve it by changing to Mono
Instant Timer
Stereo, you
(Left
Checking
or
Right).
Press REC
Press REC
4 Recording
(z)
remaining
once.
will start.
(The
display window.)
Recording continues
REC indicator
lights
until you press STOP
in the
(x)
the disc is full.
To record for
Timer
5
a
allows you to make a recording
without using the program
recording mode as necessary by pressing
REC MODE repeatedly. (HQ, SQ, LQ, EQ)
HQ; High Quality, SQ; Standard Quality,
LQ: Low Quality, EQ: Extended Quality
pressing
?
1
a
Changing
You
of
Recording
preset length
timer.
the recorder and load
Also make
Recording
Instant Timer
a
immediately
you stop the recording.
on
Instant Timer
a
fixed
Recording
Press STOP
(x)
on
to
length
right.
of
time,
see
Instant
or
the
(z)
Recording
Time
Recording
to check the
once
time will be
displayed
Menu
recording
on
the TV
time. The
screen
for
a
moment.
To Extend the
The
recording
ing REC (z).
time
Recording
can
be extended
Time
anytime by
press-
Each additional press increases the recording time
10 minutes within the available free space.
by
stop recording.
Caution
To Pause the
If the Recorder is
Recording
1. Press PAUSE/STEP
(X)
to pause the disc
during
recording.
2. When you want to continue
PAUSE/STEP (X).
recording,
while the
unplugged (or
Recorder is recording,
there is
power failure)
the recording will be
a
lost.
press
39
RECODING
Timer
Recording
This DVD Recorder
be
can
programmed
to record up to
7 programs over a period of 1 month. For unattended
recording, the timer needs to be set with the channels to
be
Enter the necessary information for your timer
2 recording(s).
?
recorded, the starting time and length.
?
Note:
?
If you
blank disc for timer
completely
use a
you must format the disc before
(Refer to "Initialize" on page 26.)
recording,
starting timer recording.
?
menu
--
Press ENTER after
filling
Press TIMER REC to
programming,
will appear.
Check field's "Rec. OK"
indicates that the timer
Choose
memorized program number, or
of the external inputs from which to record.
--
one
Date
?
Start Time
--
?
End Time
?
Mode
EQ,
AT
--
--
--
a
Set the
Set the
Choose
AT).
(Auto) mode
a
recording starting
recording ending
record mode
is available and switches record
complete recording
mode, if
?
?
?
?
40
When you set the VPS/PDC
mode is not available.
Repeat
(Monday
Choose
--
-
Friday),
a
desired
or
option
to
On, AT
repeat (Once, Daily
Weekly).
programmed
recordable disc is inserted.
(O)
to exit the
Program
List.
Notes :
The timer indicator
the
Recorder is in
the timer active.
?Y
Note :
is
5
neces-
the program.
recording
Make sure that you load a recordable disc and
press POWER to switch your unit to Standby.
time.
determines how much disc time
a
the Timer Record List
4
time.
(HQ, SQ, LQ,
and
on
the Timer Record List
Press RETURN
date up to 1 month in advance.
or
sary, to
correctly
a
Choose
?
Timer Record List.
Press ENTER, the program will be memorized
by the DVD Recorder.
To check the
PR
display
will appear.
3
?
in all the program infor-
mation.
Press TIMER REC.
The Timer Record
(left/right) moves the cursor left/right
v / V (up/down)
changes the setting at the current cursor position
Press RETURN (O) to exit the Timer Record
--
menu.
?
1
b / B
lights in
standby with
display
window if the
must press POWER to stop the timer recording.
There is a short delay when a timer recording finishes to
ou
confirm the recorded program. If two timer recordings are
set to record sequentially (one right after the other), the
very
beginning
of the later program may not be recorded.
Timer
Recording (Continued)
Timer
Reviewing
Programming
Details
Recording
be checked whenever the DVD
can
Recorder is turned
Press TIMER REC twice.
on.
?
Use v / V to select
?
Press ENTER to edit the selected program.
Timer Record menu appears.
?
Press CLEAR to
recording.
RECODING
the selected program
from the Timer Record List.
Canceling
You
can
clear
ing actually
?
timer
a
a
a
remove
Timer
timer
Recording
setting anytime
before the record-
starts.
Use v / V to select
program you want to remove
the Timer Recorder List. If you want to remove the
a
program, press CLEAR.
The confirm message will appear.
"Ok" then press ENTER.
Timer
Stopping
a
After
recording
timer
a
use
Recording
has
b/B to select
in
started, you
on
Progress
can
still cancel
the program.
Press POWER.
?
Timer
Even
Recording Troubleshooting
though
the timer is set, the Recorder will not
record when:
?
There is
no
disc loaded.
?Anon-recordable
?
disc is loaded.
Disc Protect is set to ON in the
menu
(see
?
?
page 26).
Power is turned
Setup
There
on.
already 99 titles (DVD-R/RW),
(DVD+R/RW) recorded on the disc.
are
You cannot enter program for a timer
?Arecording is already underway.
?
The time
?
There
If two
?
?
49 titles
recording
if:
you're trying to set has already passed.
are already 7 timer programs set.
timer programs overlap:
The earlier program takes priority.
or more
After the earlier program
finishes, the later program
starts.
?
If two programs are set to start at exactly the
time, the program entered first takes priority.
If the disc is
same
damaged, the recording may not be
pleted successfully. In this case even though the
field shows "Rec.
OK", it may
com-
Check
not be.
41
from
Recording
can
record from
camcorder
external
1
or
External
from External
Recording
You
an
an
external A/V
VCR, connected
Input
Source
Components
Recording
device, such
You
as a
to any of the Recorder's
can
from
record from
the DV IN
port
Digital Camcorder
digital camcorder connected
front panel of this Recorder.
the Recorder's remote, you
Camcorder and this Recorder.
inputs.
Using
Make sure that the
want to
component you
record from is connected
properly
Before
to the DVD
DV IN
make
recording,
port is
set up
source
signal
to
a
the
on
a
sure
(see
control both the
can
that the audio
page
input
for the
25).
Recorder. See pages 16.
2
Press AV
repeatedly
to select the external
input
Tips
to record from.
?
The
?T
?
Some camcorders cannot be controlled
uner:
Built-in tuner
?A V1: AUDIO IN 1 / VIDEO IN 1 mounted
?A V2: INPUT 2
(VIDEO, AUDIO (L/R),
mounted on front panel
?D V: DV IN mounted on front panel
Load
a
on
back
S-VIDEO
panel
IN)
3
Select
4 pressing
?Y
recording
REC MODE
mode
as
necessary
Press REC
once.
will start.
(The
REC indicator
lights
in the
1
2
6
on
Press STOP
fixed
(x)
or
You
to
a
component
port.
length
of
time,
see
Instant Timer
stop recording.
input
choose between Audio 1
can
DV
the
the
page 39.
(x)
from
can't record date and time information from
a
DV
is
as
require.
you
(original audio)
and
(over-dubbed audio).
Input is set from the DV Rec Audio in sub-menu
Setup menu. See DV Rec Audio on page 25 for
more
a
remotely
Check that the DV audio
disc is full.
Recording
can't control this unit
one.
Make sure your Digital Camcorder is connected
to the front panel DV IN port. See page 16.
?
continues until you press STOP
To record for
cannot control the second DVD from this
Audio 2
display window.)
Recording
DV
a
repeatedly.
Quality
(z)
ou
using
cassette.
by
HQ; High Quality, SQ; Standard Quality, LQ: Low Quality,
EQ: Extended
ou
second DVD Recorder
a
connected to the DV IN
(HQ, SQ, LQ, EQ)
5 Recording
If you connect
?
?Y
the
this
using
Recorder's remote.
cable, you
recordable disc.
must be DVC-SD format.
information.
3
Press AV
4
Find the
repeatedly
DV appears in the
want to
to select the DV
display
place on the
the recording
Note :
For best
If your source is copy-protected using CopyGuard, you will not
be able to record it using this Recorder. See Copyright on page
9 for more details.
you want to record.
?
of
window and
on
your
the TV
screen.
Camcorder tape that you
to start from.
results, pause playback
Depending
on
input.
at the
Camcorder, you
point
from which
can use
Recorder's remote to control the Camcorder
this
using
the
STOP, PLAY and PAUSE functions.
5
Press REC
(z)
once
to start
recording.
automatically stopped if the
Recorder detects no signal.
?Y ou can pause or stop the recording by pressing
PAUSE/STEP (X) or STOP (x). You cannot
?
Recording
is
control the Camcorder from this Remote Control
during recording.
?
In Video
mode, the final frame of the recording
may remain
?
42
displayed
on screen
for
a
while after
recording stops.
For timer recording to work properly on this
Recorder, the Digital Camcorder must also be
switched on and be operating.
Recording
from
External
an
Input
connect
camcorder to this
DV-equipped
recorder using a single DV cable for input and output of
audio, video, data and control signals.
This Recorder is only compatible with DV-format
(DVC-SD) camcorders. Digital Satellite Tuners,
PCs, and D-VHS Video Recorders are not compatican
(Continued)
DV-Related
What is DV?
You
Source
a
?
Messages
You may see the following messages appear
TV screen when using the DV IN port.
on
your
Not connected to Camcorder
The Camcorder is not connected
properly,
or
the
Camcorder is switched off.
ble.
?Y
a
?Y
ou
cannot connect
than
more
one
DV camcorder at
time to this Recorder.
ou
cannot control this Recorder from external
ment connected via the DV IN
equip-
?
It
to
always
ed Camcorder via the DV IN
?
Digital
Camcorders
stereo
16-bit/48kHz,
can
or
control the connect-
record audio
can
only
record
audio track. Set DV Rec Audio to Audio 1
?
one
or
stereo
source
component,
or
if the power fails in the
the DV cable becomes discon-
tape,
equip-
This Recorder cannot control the Camcorder.
Audio 2
required (see page 25).
Audio input to the DV IN port should be 32 or 48kHz
(not 44.1kHz).
Picture disturbance on the recording may occur if the
source component pauses playback or plays an
unrecorded section of
Check the tape
There is no cassette loaded into the connected
Uncontrollable device
as
?
Camcorder.
as
twin stereo tracks of 12-
bit/32kHz. This Recorder
one
to
ment.
port.
usually
just
supports connection
two
port (including
DVD
Recorders).
may not be possible
Too many devices connected
The DV IN port on this Recorder
Updating
Information
Camcorder is
information for DV.
updating
Camera mode
Camcorder is set to
camera
mode.
or
Troubleshooting
nected.
?
Although DV Rec Audio is set to Audio 2 and Audio
signal is not present, DV Rec Audio will be reset to
Audio 1 automatically.
2
If you can't get a picture and/or audio
port, check the bullet points:
?
Make
sure
through
the DV IN
the DV cable is
properly connected.
connected equipment then
?T ry
switching off the
switching back on.
?T ry switching the audio input.
Note :
Depending
on
the connected
be able to control it
using
Camcorder, you may
the Remote Control
not
supplied
with this Recorder.
43
RECODING
Title List and
List Menu Overview
Chapter
Using the Title List menu you can edit video content.
The editing features available in the Title List menu
depend on whether you are editing video on DVD, and
whether you're editing Original content, or a Playlist.
There
123
45
67
two ways to edit VR mode DVD-RW discs.
directly edit the Original content of the disc, or
are
You
can
you
can
create and edit
a
Playlist.
The
Playlist
doesn't
any of the content on the disc, but
controls how the content is played back.
actually change
just
Press MENU/LIST to
1.
Playback
should be
display the Title List menu.
stopped when you do this.
When
selecting titles, use the
play the previous/next page if
v / V buttons to dis-
there
are more
than
six titles.
If you are editing a VR mode disc, press
MENU/LIST to switch between Original and
Playlist
menu.
On the left side of the
main
part of the
screen are
screen
the
menu
options.
1.
options: To display menu option, select a title
or chapter then press ENTER. The options displayed differ depending on the disc type.
[Chapter] Displays Chapter List of the title.
[Combine] Combines two chapters into one (page
48).
[Delete] Deletes the title or chapter. (page 47)
[Delete Part] Deletes a part of the Title (page 47).
[Divide] Divides a title into two (page 50).
[Full Play] Starts playback of the selected title
including the hidden chapters.
[Hide (Show)] Hides (or Shows) the selected title
or chapter. (page 50)
[Move] Moves a chapter on the Chapter ListPlaylist menu to a position on the menu.
(page 49)
[Play] Start playback of the selected title or chapter. The hidden titles and chapters on the
DVD+R/RW cannot be play back.
[Playlist Add] Adds the title or chapter to the
Playlist. (page 46)
[Protect] Protects accidental recording, editing or
deleting of the title. (page 49)
[Title Name] Edits the title name. (page 48)
[Title] Displays Title List of the chapter.
2.
Indicates the record
The
shows thumbnails of the titles
(or chapter) on the DVD. You can change these thumbnails using the THUMBNAIL button---see Changing Title
Thumbnails
on
page 45.
Press DISPLAY to
title
on
display
the Title List
the information of selected
menu.
After
selecting a title or chapter on the Title List or
Chapter List menu, then press ENTER. The menu
options appears on the left side of the menu. Use v /
to select a option then press ENTER to confirm your
V
selection.
2.
To exit the Title List menu, press RETURN
(O)
repeatedly.
Menu
mode, free space, and elapsed
time progress bar.
3.
Current media
4.
Currently
5.
Thumbnail
6.
Shows the selected title number and total number of
selected title.
titles.
7.
Shows the title name, recorded
length.
44
date, and recording
Title and
Chapter Editing
Edits you make to the Original content change the actual content of the disc. For example, if you delete a title
or
chapter
that title
from the
Original
content
(Title
Chapter),
disc, freeing up
or
chapter is deleted from the
extra recording time.
When you edit the Playlist, on the other hand, you are
not changing the content of the disc. For example,
when you delete a title from the Playlist, you are just
telling the Recorder not to play that title; nothing is actually deleted from the disc.
or
Titles, Chapters,
Titles in the disc's
content contain
original
one or more
chapters. When you insert a title into the Playlist, all the
chapters within that title also appear. In other words,
chapters in the Playlist behave exactly as chapters on a
DVD-Video disc do. Parts are sections of Original or
Playlist titles. From the Original and Playlist menu, you
can add or delete parts. Adding a chapter or title to the
Playlist creates a new title made up of a section (ie.,
chapter) of an Original title. Deleting a part removes
part of a title from the Original or Playlist menu.
Caution
?
When
editing using
the
Delete, Add,
or
?
as
you may notice a momentary pause between edits. This is not a malfunction.
During Playlist playback,
You
+RW
+R
chapter marker anywhere in a Playlist or
Original title during playback.
Once the chapter is marked, you can use the Chapter
can
Search
put
a
feature,
well
as
as
delete, combine and
chapters in the Chapter List-Original
Playlist menu.
or
Chapter
move
List-
Chapter markers are inserted at regular intervals automatically. You can change this interval from the Initial
Setup menu (see Auto Chapter on page 25).
1
2
the title
Play
At the
(Original
or
Playlist).
you want to start a new chapter,
press CHP ADD.
A chapter marker icon appears on the TV screen.
?Y
point
ou can
also
put chapter markers in while record-
ing.
Changing
Move func-
tions, the start and end frames may not be exactly
set in the starting and ending points display.
VR
Markers
Note :
VR
and Parts
Adding Chapter
VR
Title Thumbnails
+RW
+R
Each title
displayed in the Title List menu is represented
by a thumbnail picture taken from the start of that title or
chapter.
If you prefer, select a different still picture from within a
title.
1
Play
the title
(Original
or
Playlist).
Press THUMBNAIL to make the
2 played picture
Original
The still
or
the
Playlist
one
currently
dis-
that appears in the
menu.
picture that you choose
Original or Playlist menu.
appears in both the
Tip
You
change the thumbnail picture of the title on
the Chapter List-Original or Chapter List-Playlist menu.
Select a chapter on the Chapter List-Original or Chapter
List-Playlist menu, then press THUMBNAIL. The thumbnail picture of the title that includes the chapter is
changed.
can
also
45
EDITNG
Title and
Making
a
Chapter Editing (Continued)
New
Playlist
Use this function to add
an
VR
Original
title
or
chapter
to
the
Playlist. When you do this, the whole title is put into
the Playlist (you can delete bits you don't need later
see Deleting a Title/Chapter on page 47).
Adding Additional Title/Chapters
VR
Playlist
You
can
add
---
The title appears in the Playlist complete with the chapter markers that appeared on the Original. However, if
even
1
you add more chapter markers to the Original later,
these are not automatically copied over into the Playlist
Choose
Original
an
You
add up to 999 chapters to one disc If you
want to add a chapter of a title, use the Adding a
can
.
title/chapter
to the
Choose
Playlist
or
chapter
Playlist, then press ENTER.
Original menu options appear on the
a
to
Playlist
title
put into
left side of the
screen.
2 options
'Playlist'
from
Original
menu
then press ENTER.
this page.
chapter on the Original menu
to put into the Playlist, then press ENTER.
Original (Title or Chapter) options appear on the left
side of the Original menu.
a
title
on
only
title
to
the
Use v / V to select
title.
1
if it is
Original title or chapter
already registered.
an
to the
or
Use v / V to select
2 options
'Playlist'
from
Original
then press ENTER.
3
Choose
a
Title
tered to insert
List-Playlist that is already regisa title or chapter, then press
ENTER.
The title
or
chapter
appears in the
updated Playlist
menu.
4
Repeat steps 1-3 to
ter on the Playlist.
3
Select 'New
The
new
chapters
46
then press ENTER.
title appears in the updated Playlist. All
of the title are added to the Playlist.
Playlist'
to the
or
chap-
(O) to exit, or MENU/LIST
Title List-Original menu.
Press RETURN
5 back
add additional title
to go
Title and
Deleting
VR
a
Chapter Editing (Continued)
Title/Chapter
+RW
+R
Deleting
Video
You
If you erase a title or chapter from the Playlist menu on
DVD-RW discs formatted in VR mode, you only remove
it from the Playlist; the title/chapter remains in the
Original
menu.
If you choose to delete a title or chapter from Title List
or Chapter List menu, the title or chapter is actually
deleted from the disc and the
remaining time available
for recording increases. Titles/chapters deleted from the
Original are also removed from the Playlist.
1
2
can
a
delete
VR
Part
part which you do
a
not want in the title.
Press MENU/LIST
Title
repeatedly to display
List-Original or Title List-Playlist menu.
Use vVbBto choose
a
title you want to
delete then press ENTER.
The options appears on the left side of the
3
Select 'Delete Part' from the
4
Press ENTER.
options
on
menu.
the
menu.
Note :
It may not be possible to delete
than 5 seconds long.
1
On the Title List
bBto choose
a
chapters
Chapter
chapter or
or
that
List menu, use vV
title you want to
delete then press ENTER.
Options appears on the left side of the
2
Select 'Delete' from the
less
are
options
on
screen.
the
menu.
Title Edit
(Delete Part)
menu
appears
on
the TV
screen.
'Start Point' icon is
Press ENTER to confirm.
3
The confirm message for
4
Use b / B to select 'Ok' then press ENTER.
The selected chapter or title is deleted.
After
pressing ENTER,
displayed.
5
6
Repeat steps
1
-
deleting
the new,
will appear.
updated
menu
Starts
is
6
4 to continue to delete from the
(O) repeatedly
to exit the
menu.
When DVD+RW
changed
?
If
more
titles
?
recording,
name
is
are
combined into
repeatedly deleted,
When you are deleting a title or chapter, only the last
one on DVD+RW increases remaining recording time.
to find the
pause step, search and
starting point.
of the section
starting point
you want to delete.
'End Point' icon is highlighted.
part is indicated
on
the
Progress
Bar.
7
8
Press ENTER at the
ending point
you want to delete.
You can cancel the selected
point,
of the section
v / V to
use
select 'Cancel' icon then press ENTER.
the
one.
use
Use pause step, search and slow-motion to find
the ending point.
to 'Deleted Title'.
than two titles
are
the deleted title's
and
Press ENTER at the
The
menu.
Press RETURN
playback
5 slow-motion
Notes :
?
highlighted.
9
After you finish editing, select the 'Done' icon
then press ENTER.
The confirm message for
10
deleting
will appear.
Use b / B to select 'Ok' then press ENTER.
The selected part is deleted from the title and Title
List-Original
or
Title
List-Playlist
menu
appears.
47
EDITNG
Title and
Naming
You
1
VR
Title
a
can name
titles
Video
+RW
Combining
+R
VR
independently.
On the Title List menu, use vVbBto choose
the title you want to name then press ENTER.
Options
2
Chapter Editing (Continued)
on
appears
the left side of the
menu.
Use vVbBto select the 'Title Name'
menu
+RW
Chapters
+R
Use this function to combine two
Original chapters
Into One
into
adjacent Playlist
or
one.
Note :
option
This function is not available if there is
only
one
chapter
within the title.
then press ENTER.
Keyboard
Two
appears.
1
On the
ter of
Chapter List menu, select the first chapthe two chapters you want to combine
then press ENTER.
Chapter List options appear
on
the left side of the
menu.
2
3
Enter
a name
Use vVbBto select 'Combine'.
The combine indicator appears between the two
chapters you want to combine.
for the title. Use vVbBto select
character then press ENTER to confirm your
selection. Refer to step 5 as shown on page 27
a
(Disc Label).
3
4
Choose OK then press ENTER to save the
and return to the previous menu display.
5
Press RETURN
(O) repeatedly
name
to exit the
menu.
Notes :
?
?
?
Names
be up to 32 characters long.
For discs formatted on a different DVD Recorder, you
will see only a limited character set.
When
can
recording
on
discs, the entered
player only
48
DVD-R, DVD+R
name
is
displayed
after finalization.
or
DVD+RW
on
the DVD
Press ENTER to confirm.
After
pressing ENTER,
played.
the
updated
menu
is dis-
Title and
Moving
a
Chapter Editing (Continued)
VR
Playlist Chapter
Protect
Use this function to re-arrange the playing order of the
Playlist chapters on the Title List-Playlist menu.
Note :
This function is not available if there is
1
Select
a
chapter
from the
only
one
chapter.
Chapter List-Playlist
menu.
Press ENTER.
2 Chapter List-Playlist options
of the
appear
on
the left side
menu.
Use vVbBto select 'Move' from
3 options
a
Title
Use this function to
editing
1
2
or
deleting
+RW
+R
protect against accidental recording,
of the title.
Press MENU/LIST to
display
Use vVbBto choose
a
the Title List
title you want to pro-
tect then press ENTER.
Options appear on the left side of the
3
Select 'Protect' from the
4
Press ENTER to confirm.
menu.
screen.
options.
Playlist
then press ENTER.
The lock mark will appears
on
the title's thumbnail.
Tip
4
Use vVbBto choose the
you want to
move the chapter to then press ENTER.
After pressing ENTER, updated menu is displayed.
place
If you select a title that has already been protected on
the Title List menu, you can 'unprotect' it by choosing
"Protect" from the Title List menu options. After doing
that, you
can
edit and delete the title.
49
EDITNG
Title and
Hide
You
a
can
Chapter Editing (Continued)
+RW
Chapter
skip playing chapters
+R
without
Dividing
deleting
from the
Use this command to
disc.
1
On the
List menu,
Chapter
choose a chapter
use
vVbBto
1
2
split
a
menu
options
appears
on
the left side of the
appear
on
the left side of the
screen.
2
options.
Select 'Divide' from the Title List
3 lighted.
Title Edit
Press ENTER to confirm.
chapter's
(Divide)
thumbnail will dim.
Current
If you select a chapter that is already dim on the
Chapter List menu, you can 'show' it by choosing
"Show" from the Chapter List menu options. After
are
able to
see
menu
menu
option
options.
is
high-
appears and goes into
STOP mode.
Tip
that, you
titles.
screen.
Select 'Hide' from the
The
new
title you want to
a
Press ENTER after the 'Divide'
3
+RW
title up into two
On the Title List menu, select
divide then press ENTER.
The
you want to hide then press
ENTER.
Options
One Title Into Two
picture
The first
doing
title's
the title.
thumbnail
The second
title's thumbnail
4
Use pause step, search and slow-motion to find
the point you want to divide the title.
5
When the 'Divide'
ENTER at that
You
option
point.
can remove
the
is
highlighted, press
dividing point
and exit the Title
Edit
(Divide) menu, use v / V to select 'Cancel'
option then press ENTER. The division point is
removed.
6
Choose 'Done'
the
option
dividing point.
then press ENTER to fix
The title is divided into two
4 minutes to divide.
50
new
titles. It take up to
Additional Information
+RW
Overwriting Recording
To overwrite
video
a new
recording
previously
on a
recorded
title, follow these steps. This feature is not
available for DVD+Rs, that always record at the end of
the Disc.
1
2
Select
input
you want to record
source
REF NC
(TV
channel, AV1-2, DV).
Press MENU/LIST to
display
the Title List
menu.
3
To
play
back
Most
3
4
over-
regular
DVD
Press REC
Overwrite
The
new
to
(x)
updated
menu
is dis-
Notes :
If the overwrite is
of the current
longer
title, the
than
title.
protected
the recording length
a
next title is overwritten.
that the disc
can
be
computer equipped with
a
To finalize
a
disc, refer
You
can
displayed
Recorders or Players
DVD
menu
+R
view the Title List
player
that is
capable
displayed on the other
playing DVD+RW or
menu
of
DVD+R discs.
1
2
Insert DVD+R
or
with the other
play
or
not.
player
to
play.
suitable DVD-ROM drive.
on
for
page 27.
Notes :
The edited contents of
+RW
mode, finalized
to "Finalize"
players.
other DVD
also
Finalizing a Video mode disc creates a menu screen
navigating the disc. The menu can be accessed by
pressing MENU/LIST or TITLE.
at the
on
can
recordings and editings in place so
played on a regular DVD player or
Unfinalized DVD+RW is
protected, the overwriting stops
starting point of the title.
Viewing
or
'saves' the
But if next title is
Title List
Disc)
the
played.
This function is not available for
came
a
finalized discs
players
check what formats of discs it will
stop the overwrite recording.
title is created and
play
can
DVD+RWs. A small number of
Finalizing
Press STOP
(PLAY).
mode, finalized DVD+R
Check the manual that
title.
5
players
DVD-RW discs recorded in VR
write.
(z) to start overwrite recording.
recording starts from the start point of
N
Recordings on
Players (Finalizing
recorded in Video
title you want to
or
want
Your
Other DVD
a
title, select the title you
then press ENTER
Playing
Use vVbBto choose
a
a
playable
on
regular
DVD+RW disc is
DVD
compatible
regular DVD players only after finalization.
Any edited contents of the DVD+R disc are not
compatible on regular DVD players. (Hide, chapter
combine, added chapter mark, etc.)
How long finalization takes depends on the type of
on
disc, how much is recorded
number of titles
on
DVD+R DL disc
can
on
the
disc, and the
the disc.
take up to 30 minutes to finalize.
DVD+RW disc recorded
already.
Press TITLE in
Title List
menu
play
or
stop mode.
will appear
as
shown below.
Tip
You
can remove
STOP
the Title List
menu
by pressing
(x).
51
Language Code
and Area Code List
Language Codes
Use this list to
your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
input
Language
Code
Abkhazian
following
Code
6566
Language
Fiji
Afar
6565
Afrikaans
initial
settings:
Code
7074
Language
Lingala
Code
7678
Language
Singhalese
Finnish
7073
Lithuanian
7684
Slovak
8375
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
Ameharic
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yo ruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
8373
8471
8479
Area Codes
Choose
an area
Area
code from this list.
Code
Code
Area
Code
Area
Code
ET
Malaysia
MY
Saudi Arabia
SA
AR
Ethiopia
Fiji
FJ
Maldives
MV
SN
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
Chile
CL
Hong Kong
Hungary
HU
NG
Switzerland
CH
China
CN
India
IN
Nigeria
Norway
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
KW
Portugal
PT
Uzbekistan
UZ
LY
Romania
RO
Vietnam
VN
LU
Russian Federation
RU
Zimbabwe
ZW
Afghanistan
Argentina
Czech
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
Egypt
EG
El Salvador
SV
Libya
Luxembourg
52
Republic
AF
Area
SG
SK
UG
Controlling
You
Your TV with the
source, and
power switch of your LG TV with the supplied remote.
can
control the sound
level, input
Controlling
You
You
can
control your TV
using
Remote
Supplied
the buttons below.
can
other TVs with the remote
control the sound
source, and
well. If your TV is listed
level, input
power switch of non-LG TVs as
in the table below, set the appropriate manufacturer
code.
1.
While
down TV POWER button, press
the number buttons to select the manufacturer
holding
code for your TV
2.
the table
(see
below).
Release TV POWER button.
Code numbers of controllable TVs
TV Control
Buttons
If
more
them
than
one
at
one
code number is
listed, try entering
time until you find the
a
one
that works with
your TV.
You
POWER
Turn the TV
AV
Switch the TV's
can
on or
off.
input
source
between the TV and other
input
sources.
VOL +/--
Scan up or down through
memorized channels.
Adjust
Code Number
LG / GoldStar
1
Zenith
1,3,4
Samsung
6,7
Sony
8,9
Hitachi
4
(Default),
2
Notes :
By pressing
PR +/--
Manufacturer
the sound level of the TV.
Depending
on
function
the
on
your TV,
TV,
some or
even
after
all buttons may not
entering
the correct
manufacturer code.
If you enter
a new
code
number, the code number
previously entered will be erased.
After you replace the batteries in the remote,
the code
number you have set may be reset to the default
setting. Re-enter the appropriate code number again.
53
REF NC
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
before
problem
contacting
service.
Solution
Cause
Symptom
No power.
The power cord is disconnected.
Plug the power
securely.
No
The TV is not set to receive DVD
Select the
Recorder
on
picture.
signal output.
cord into the wall outlet
appropriate video input mode
so the picture from the DVD
the TV
Recorder appears
The video cable is not connected
on
the TV
Connect the video cable
screen.
securely.
securely.
The connected TV power is turned off.
Turn
The
Select the correct
equipment connected with the
audio cable(s) is not set to receive
Recorder signal output.
No sound.
The audio cables
are
DVD
not connected
the TV.
on
Audio Receiver
input
mode
the
on
you can listen to the
sound from the DVD Recorder.
so
Connect the audio cable
securely.
securely.
The
playback picture
is
The power of the equipment connected
with the audio cable is turned off.
Turn
The audio
Replace
connecting
The disc is
cord is
damaged.
the
on
equipment
connected with
the audio cable.
it with
new one.
Clean the disc.
dirty.
poor.
The DVD Recorder
does not start
No disc is inserted.
Insert
a
disc.
cator in the
playback.
An
unplayable
disc is inserted.
Insert
a
placed upside
down.
indi-
(Check the disc
system, and regional code.)
playable
type, color
The disc is
(Check that the disc
display window is lit.)
disc.
Place the disc with the
side
playback
down.
The disc is not
placed
within the
guide.
Place the disc
inside the
dirty.
Clean the disc.
The
level is set.
Cancel the
the
The
picture from the
external input is distort-
The video
ponent is
signal from the
copy-protected.
external
com-
Some channels
are
when
Those channels
picture or sound of
broadcasting channel is
weak or missing.
Aerial
The
The recorder's
picture from the
external input is not
54
are
not stored in the
Recorder.
The
shown.
Rating
function
or
change
level.
You cannot connect via this Recorder.
Connect the
component directly
to your
TV.
ed
skipped over
usingv/V.
rating
tray correctly
guide.
The disc is
Rating
the disc
on
or
Restore channels. See
on
cables
are
loose.
source
is incorrect.
"Program
Edit"
pages 18-19.
Tighten
connections
Use AV to select
AV2, DV, etc.)
or
input
replace
channel
cable.
(AV1,
Troubleshooting (Continued)
The disc
Can't
play a disc
recorded using this
Recorder
on
Solution
Cause
Symptom
Some
another
was
recorded in Video mode.
Finalize the disc.
will not
No solution.
players
play
final-
even a
ized disc recorded in Video mode.
player.
The disc
was
recorded in VR
The other
mode,
player must
order to play it.
ble in
Cannot record
not record
or
did
Discs recorded with copy-once material
cannot be played on other players.
No solution.
The
Use another disc.
remaining
blank space
on
The
source
copy
you
are
setting
the
channel is tuned
When
trying
to record is
on
to
recording
is not
the
recording channel,
a
the TV's
own
Video mode
programs that are copy-once
cannot be recorded.
cor-
TV is not
once
programmed
VR mode formatted disc for copymaterial.
a
page 20.
on
Reprogram
Recording"
light does
programming timer.
not
on
Set clock to correct time. See "Clock
Set"
appear after
present.
the Recorder's
Use
protected
Timer record indicator
is not
Select the channel
disc,
incorrectly.
Playback
source.
built-in TV tuner.
rect time.
Stereo Audio Record
You cannot record the
tuner.
Clock in DVD Recorder is not set to
Timer has been
and/or
compati-
protected.
When
recording
possible.
the disc
be RW
is insufficient.
successfully.
Timer
(page 27)
Reprogram
Stereo-compatible.
No solution.
Broadcast program is not in stereo for-
No solution.
Timer. See "Timer
page 40.
on
Timer.
mat.
DVD Recorder A/V Out
connected to TV A/V In
jacks are
jacks.
Make A/V connections. Stereo is
not
available
only
via A/V
output from DVD
Recorder.
DVD Recorder Audio/Video Out is not
selected for
viewing
Select AUX
or
A/V
source as
TV
input.
at the TV.
DVD Recorder's TV audio channel is set
Set TV audio channel mode to Stereo.
to
See
mono.
"Changing
TV audio channel"
on
page 39.
The Remote Control
The Remote Control is not
does not work
remote
properly.
sensor on
pointed
at the
the DVD Recorder.
Point the Remote Control at the remote
sensor on
The Remote Control is too far from the
Operate
the DVD Recorder.
the Remote Control within 7
m.
DVD Recorder.
There is
an
obstacle in the
path
of the
Remove the obstacle.
Remote Control and the DVD Recorder.
The batteries in the Remote Control
are
Replace
the batteries with
new ones.
exhausted.
Resetting
the recorder
If you observe any of the
The unit is
or
plugged in,
but the power will not turn
The
panel display is not working.
recorder is not operating normally.
can
reset the recorder as follows:
Press and hold the POWER button for at least five
following symptoms...
off.
The front
...you
on
seconds. This will force the unit to power off then
turn the unit back on.
the power
and then plug it in
Unplug
cord, wait
at least five
seconds,
again.
55
REF NC
Specifications
General
Power
AC
requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Television
110-240V, 50/60 Hz
27W
430
x
49
x
300
mm
(w
x
h
x
d)
3.5Kg
5˚C to 35˚C
5 % to 90 %
system
PAL
I, B/G, I/I, SECAM D/K, K1 colour system
Recording
format
PAL
Recording
format
DVD Video
Recording
Recordable discs
Recording,
DVD-VIDEO
DVD-ReWritable, DVD-Recordable, DVD+ReWritable, DVD+Recordable,
DVD+Recordable
(Double Layer)
DVD (4.7GB): Approx. 1 hour (HQ mode), 2 hours (SQ mode),
4 hours (LQ mode), 6 hours (EQ mode)
DVD+R DL (8.5GB): Approx. 2 hour (HQ mode),
3 hours 40 minutes (SQ mode), 7 hours 50 minutes (LQ mode),
11 hours 30 minutes (EQ mode)
Recordable time
Video
recording format
Sampling frequency
Compression format
Audio recording format
Sampling frequency
Compression format
27MHz
MPEG 2
48kHz
Dolby Digital
Playback
Frequency
DVD
(PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz to
DVD(PCM96kHz):8Hzto44kHz
More than 100 dB (AUDIO OUT connector)
Less than 0.008% THD (AUDIO OUT connector)
More than 95 dB (AUDIO OUT connector)
response
Signal-to-noise
ratio
Harmonic distortion
Dynamic
range
20 kHz
Inputs
ANTENNA IN
Antenna
input,
75 ohms
VIDEO IN
1.0
AUDIO IN
0
ohms, sync negative, RCA jack x 2
dBm more than 47 kohms, RCA jack (L, R) x 2
DV IN
4
pin (IEEE
Vp-p
75
1394
standard)
Outputs
VIDEO OUT
Vp-p 75 Ω, sync negative, RCA jack x 1
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin
(C)0.3V(p-p)75Ω
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
0.5 V (p-p), 75 Ω, RCA jack x 1
3 V (p-p), 75 Ω, Optical connector x 1
2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
1
S-VIDEO OUT
COMPONENT VIDEO OUT
Audio
output (digital audio)
Audio output (optical audio)
Audio output (analog audio)
x
1
Accessories:
Videocable.............................1
Audiocable(L,R)................1
RFCoaxialCable.........................1
Remotecontrol..................1
Batteries...............................2
Design
and
specifications
are
subject
Manufactured under license from
marks of
Dolby
DTS and DTS
56
to
Dolby
change
without notice.
Laboratories.
"Dolby",
"Pro
Logic"
and the double-D
Laboratories.
Digital
Out
are
registered
trademarks of
Digital
Theater
Systems,
Inc.
symbol
are
trade-
P/NO
:
3834RD0063F
Download PDF

advertising