LG | DR6921W | LG DR6921W Owner’s Manual

DR6921VW1_AA2ALL_ENG
DVD RECORDER
OWNER'S MANUAL
MODEL
:
DR6921W
Before
connecting, operating
please
read this instruction booklet
or
adjusting this product,
carefully and completely.
Safety
Precautions
SERIAL NUMBER: The serial number is found
CAUTION
Model No.
CAUTION: TO REDUCE THE RISK
Serial No.
OF ELECTRIC SHOCK
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash
equilateral triangle
with arrowhead
symbol
is intended to alert the
within
user
an
to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient
magnitude
to constitute
risk of electric
a
shock to persons.
The exclamation
point
within
is intended to alert the
important operating
user
an
equilateral triangle
to the presence of
and maintenance
instructions in the literature
(servicing)
accompanying the
product.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
WARNING: Do not install this
such
as a
book
case or
equipment
in
confined space
a
similar unit.
CAUTION:
This DVD Recorder
To
ensure
manual
proper
carefully
employs
use
of this
a
Laser
System.
product, please
read this
owner 's
and retain for future reference should the unit
require maintenance, contact
(see service procedure).
an
Use of
or
controls, adjustments,
dures other than those
specified
authorized service location
the
performance of proceherein may result in haz-
ardous radiation exposure.
To
prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as
vases, should be
2
placed
on
the
the back of
unique to this unit and not available
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DO NOT REMOVE COVER
on
this unit. This number is
apparatus.
___________________________________
___________________________________
to
Table of Contents
INTRODUCTION
DVR HOOKUP
SafetyPrecautions.......................2
TableofContents......................3-4
DVDRecorderOverview................5-10
RecordableDiscs.......................5
PlayableDiscs.........................5
Disc-relatedterms......................6
?TypesofvideoCDs..................6
AboutSymbols.........................6
?Aboutthesymboldisplay............6
About the disc symbols for instructions
6
?
.
.
.
.7
?Whatare'recordingmodes'?.
Is editing a DVD like editing a video tape? 7
About word 'Original' and 'Playlist'
7
AboutDVDrecording...................8-9
Disc types and recording formats, modes,
andsettings........................8
.8
?RecordingTVaudiochannels.
?Notesforrecording...................8
.9
?Restrictionsonvideorecording.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?
.
?
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?Whatis'CPRM'?....................9
?Copyright..........................9
.9
RemoteControlOperatingRange.
Remote Control Battery Installation
9
ResettingtheDVDRecorder...............9
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ConnectionstoYourTV.................16
ConnectingtoanAmplifier...............17
Accessory Audio/Video (A/V) Connections
toDVDRecorder......................18
ConnectingaDigitalCamcorder.
.
.
.
.
.
.
.
.
.
.18
DVR SETUP
Pre-operationSetup..................19-29
InitialSettings.........................19
GeneralOperation.....................19
General...........................19-23
.
?
.
ConnectingtotheAerial.................15
.
Aboutrecordablediscs...................7
.
Connections........................15-18
.
Precautions..........................10
?Handlingtheunit...................10
?Cleaningtheunit...................10
NotesonDiscs........................10
?Handlingdiscs.....................10
?Storingdiscs......................10
?Cleaningdiscs.....................10
FrontPanel............................11
FunctionDisplayWindow................12
RemoteControlOverview................13
RearPanelConnections.................14
?AutoProgramming..................19
?ProgramEdit....................20-21
?ClockSet.........................22
?TVAspectRatio....................22
?DisplayMode......................22
?ProgressiveScan...................22
?PBC.............................23
?FactorySet.......................23
Language............................23
?DisplayLanguage..................23
?DiscLanguage.....................23
Audio...............................24
?DolbyDigital.......................24
?DTS.............................24
?MPEG...........................24
?SamplingFrequency................24
.24
DRC(DynamicRangeControl).
?
.
.
.
.
.
.
.
?Vocal............................24
Lock(ParentalControl)...............25-26
?SetPassword......................25
?Rating...........................25
?CountryCode......................26
Recording.........................26-27
?RecordModeSet...................26
?RecordAspect.....................26
?DVRecordAudio...................26
?AutoChapter......................27
Disc..............................27-28
?DiscFormat.......................27
?DiscProtect.......................27
?Finalize..........................28
?DiscLabel........................28
Overview for the On-Screen
?
?
Displaying
Display
Watching
On-screen Display
.
.
.
.
Information While
Disc Information
.
.
TV
.
.
.
.
.
.
.
.
.
29
29
29
3
INTRODUC
Table of Contents
Recording from External Input source
Recording from External Components
Recording from a Digital Camcorder
PLAYBACK
.30-33
DVDandVideoCDOperation.
DVDorVideoCDPlayback..............30
.
.
.
.
.
.
.
.
.
.
.
.
.
41-42
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
41
41
WhatisDV?..........................42
GeneralFeatures......................30
?TITLESelection....................30
?DV -RelatedMessages...............42
?CHAPTER/TRACKSelection.
?T roubleshooting....................42
.
.
.
.
.
.
.
.
.30
?Search...........................30
?
Still Picture and
Frame-by-Frame Playback
.
30
EDITING
?SlowMotion.......................31
.43-47
TitleListandChapterListMenu
Using the Title List-Original menu VR ......43
Using the Chapter List-Original menu VR ...43
Using the Title List-Playlist menu VR ......44
Using the Chapter List-Playlist menu VR ...44
Using the Title List menu Video ...........45
?DeletingaTitle.....................45
Using the Title List menu +RW ............46
Using the Chapter List menu +RW .........46
Using the Title List menu +R ............47
Using the Chapter List menu +R .........47
.48-53
TitleandChapterEditing.
Titles,ChaptersandParts................48
AddingChapterMarkers.................48
ChangingTitleThumbnails...............48
MakingaNewPlaylist...................49
Adding Additional Title/Chapters to the Playlist 49
DeletingaTitle/Chapter.................50
DeletingaPart........................50
NamingaTitle........................51
.51
CombiningTwoChaptersIntoOne.
MovingaPlaylistChapter................52
?Random..........................31
?Repeat..........................31
?RepeatA-B.......................31
?T imeSearch.......................31
?Zoom............................32
?MarkerSearch....................32
?
Reviewing
the Contents of DVD Video
Discs:Menus......................32
?T itleMenu........................32
?DiscMenu........................32
?CameraAngle.....................32
.32
ChangingtheAudioSoundtrack.
?
?AudioChannelSelection.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.33
?3DSurround......................33
?Subtitles..........................33
?InstantSkip.......................33
?LastConditionMemory...............33
?PIP(Picture-in-Picture)...............33
34-36
Audio CD and MP3/WMA Operation
.34
PlayinganAudioCDorMP3/WMAfile
.34
NotesonMP3/WMARecordings.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?Pause...........................35
.
.
.
.
.
.
?T rackSelection....................35
ProtectaTitle.........................52
?RepeatTrack/All/Off.................35
HideaChapter........................53
?Random..........................35
DivideOneTitleIntoTwo................53
?3DSurround......................35
AdditionalInformation...................54
?Search...........................35
OverwriteRecording....................54
Viewing Title List menu displayed on other
DVDRecordersorPlayers...............54
Playing Your Recordings on Other
.54
DVDPlayers(FinalizingaDisc).
?RepeatA-B.......................35
ProgrammedPlayback................36
JPEGFileOperation....................37
ViewingJPEGDisc.....................37
.
.
.
.
.
.
.
.
.
?SlideShow........................37
?StillPicture........................37
REFERENCE
?MovingtoanotherFile...............37
?Torotatepicture...................37
55
Language Code and Country Code List
Controlling Your TV with the Supplied Remote 56
Troubleshooting.....................57-58
Specifications.........................59
.
.
.
.
.
4
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
RECORDING
BasicRecording........................38
.38
BasicRecordingfromTVchannels.
InstantTimerRecording.................38
TimerRecording.....................39-40
40
Reviewing Timer Recording Details
.40
CancelingaTimerRecording.
40
Stopping a Timer Recording in Progress
Timer Recording Troubleshooting
40
.
About the
symbols
Indicates hazards
itself
.
or
for instructions
likely to cause
damage.
harm to the unit
other material
Note Indicates special operating features of this unit.
Tip
Indicates
tips
and hints for
making
the task easier.
DVD Recorder Overview
Recordable Discs
DVD-RW
(Digital
These Discs
Video Disc
Recordings can
record again on
be
DVD-R
Video Disc
These Discs
can
Video CD
(VCD)
(8cm/12cmdisc)
Disc.
same
-
be recorded
can
Recordable):
only once.
After you finalize a DVD-R, you cannot
record on it or edit it.
DVD+RW
(Digital
These Discs
can
Video Disc
be recorded
Recordings can be erased,
again on the same Disc.
DVD+R
(Digital
These Discs
can
(8cm/12cmdisc)
on
erased, then you
the
DVD
ReWritable):
repeatedly.
-
be recorded
can
(Digital
+
on
Video Disc
+
be recorded
can
(8cm/12cmdisc)
In
ReWritable):
repeatedly.
then you
Audio CD
record
Recordable):
only once.
addition, this unit can play DVD-R/DVD-RW discs;
discs; CD-R/CD-RW/DVD-R/
DVD+R/DVD+RW
DVD-RW/DVD+R/DVD+RW discs that contain audio
titles, MP3 files, WMA Files,
kodak
picture
Depending
ment
or
some
--
Notes :
--
DVD-R/RW,
ed
using
CD-RW discs.
--
personal computer or a DVD or CD
may not play if the disc is damaged or dirty,
if there is dirt
or
condensation
on
files; SVCD; and
on
the conditions of the
recording equip(or DVD±R/±RW) disc itself,
(or DVD±R/±RW) discs cannot be
the unit.
on
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
(the
Do not
use irregularly shaped CDs (e.g., heart-shaped
octagonal). Doing so may result in malfunctions.
Depending on the recording software & the finalization,
some recorded discs (CD-R/RW or DVD±R/RW) may
not be playable.
or
DVD+R/RW and CD-R/RW discs record--
a
Recorder
or
or
JPEG
the CD-R/RW
CD-R/RW
played
This Recorder cannot record CD-R
or
CDs.
Notes :
--
After you finalize a DVD+R, you cannot
record on it or edit it any more.
--
Discs
Playable
the Recorder's
lens.
--
If you record a disc
if it is recorded in a
cases
in which it
using a personal computer, even
compatible format, there are
may not play because of the settings
of the
application software used to create the disc.
(Check with the software publisher for more detailed
information.)
--
The Recommendable DVD discs
:
DVD-R
DVD+R
DVD-RW
DVD+RW
SONY
SONY
SONY
SONY
TDK
TDK
TDK
TDK
Imation
Imation
Imation
Imation
Verbatim
MAXELL
Verbatim
Verbatim
RiDATA
RiDATA
Memorex
RiDATA
Panasonic
Fujifilm
Fujifilm
Fujifilm
LG
Ricoh
LG
Ricoh
Mitsubishi
HP
Mitsubishi
HP
That's
That's
Samsung
Ritek
Philips
Pioneer
Radus
Pioneer
Regional
code of the DVD Recorder and DVDs
4
This DVD Recorder is
designed and manufacRegion 4 encoded DVD software.
tured for
The
playback of
region code on the
cates which
labels of
some
DVD discs indi-
play those discs.
play only DVD discs labeled 4 or ALL. If
you try to play any other discs, the message "Incorrect
region code. Can't play back" will appear on the TV
screen. Some DVD discs may not have a region code
label even though their playback is prohibited by area
This unit
type of DVD Recorder
can
can
limits.
Notes on DVDs and Video CDs
Some
playback operations
of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content
some
designed by the software manufacturer,
playback features of the unit may not be available
other functions may be added.
Refer also to the instructions supplied with the DVDs
or
and Video CDs. Some DVDs made for business purposes may not be played on the unit.
5
INTRODUC
DVD Recorder Overview
(Continued)
Disc-related terms
Title
About
(DVD only)
About the
The main film content,
or music album.
Each title is
assigned
locate it easily.
you to
Symbols
accompanying
"
a
symbol display
feature content,
title reference number
enabling
"
may appear on the TV
This icon means the function
manual is not available
during operation.
explained in this owner's
that specific disc, or at that
on
screen
time.
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number to
enable you to locate the chapter you want. Depending
on the disc, chapters may not be labeled.
Track
(Video
CD and Audio CD
only)
Sections of a picture or a musical piece on a Video CD
or an Audio CD. Each track is assigned a track number,
enabling you to locate the track you want.
Video CD with PBC
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene available is displayed
on the Scene menu and assigned a scene number,
enabling you to locate the scene you want.
A scene may be composed of one or several tracks.
a
moving pictures
Types
There
and still
of Video CDs
are
two
types of Video CDs:
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
Video CDs
PBC
with the
system via
functions, or other
typical computer-like operations. Moreover, high resolution still
pictures
menus, search
can
be
played
if
they
are
included
on
the disc.
equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Video CDs not
6
symbols
A section whose title has
applicable only
symbol.
are
Many
dent
one
for instructions
of the
to those discs
following symbols
represented by the
functions
the
on
provided on this Recorder
recording mode. One or more
are
depen-
of the sym-
VR
bols(
DVD+R
Video
DVD+RW ) appear by
(explained in this manual) so that you can
glance whether it's applicable to the disc
,
,
,
each function
see
at
a
loaded.
Scene
On
About the disc
Video
DVD-R/RW with Video
VR
DVD-RW with VR
+R
DVD+R disc
+RW
recording
recording
mode
mode
DVD+RW disc
DVD
DVD-Video disc
VCD
Video CDs
CD
Audio CDs
MP3
MP3 CDs
WMA
WMA CDs
JPEG
JPEG CDs
The finalized DVD disc is
a
DVD-Video disc.
DVD Recorder Overview
(Continued)
About recordable discs
How
are
DVD+RW mode
recording +RW
picture quality/recording time settings available (HQ, SQ, LQ, EQ)
Playable on regular DVD players
The edited contents is playable on regular DVD players only after finalizing
Recordings can be edited the title/chapter
?4different
recordable discs different?
The essential difference among DVD-R, DVD-RW,
DVD+R and DVD+RW is that DVD-R and DVD+R
?
are
?
record-once
medium, while DVD-RW and DVD+RW
re-recordable/erasable medium. You
can
are
re-record/
?
erase a
DVD-RW and DVD+RW disc
approximately
1,000 times.
DVD+R mode
+R
recording
picture quality/recording time settings available (HQ, SQ, LQ, EQ)
Playable on regular DVD players (after finalization)
Any edited contents are not be compatible on regular
DVD players. (Hide, chapter combine, added chapter
mark, etc.)
Limited title/chapter editing features.
?4different
Can I
play my recordable discs in a regular DVD
player?
Generally, DVD-R, DVD+R and DVD-RW discs recorded in Video mode are playable in a regular DVD player,
but they must be 'finalized' first. This process fixes the
contents of the disc to make them readable to other
DVD
players
as
playable
in
some
player.This
of
with Video
are
There
are
are
playable
in
a
regular
indicates
capable
What
mode
(Video Recording)
players.
Unfinalized DVD+RW discs
DVD
a product feature that is
playing DVD-RW discs recorded
Recording format.
'recording modes'?
various
recording modes available using this
recording to a DVD-R, DVD+R or
DVD+RW disc, recordings are always in Video mode.
DVD-RW discs can be formatted for VR mode recording
or Video mode recording.
Recorder. When
VR mode
VR
recording
picture quality/recording time settings
able (HQ, SQ, LQ, EQ)
Not playable on regular DVD players
Recordings can be extensively edited
?4different
?
?
?
?
DVD-Video discs.
DVD-RW discs recorded in VR
are
?
Video mode
avail-
Video
recording
?4different picture quality/recording time settings available (HQ, SQ, LQ, EQ)
Playable on regular DVD players (after finalization)
Limited editing features
?
Note :
DVD-Video Format
(Video mode) is a new format for
recording on DVD-R/RW and DVD+R/RW discs that
was approved by the DVD Forum in 2000. You may
therefore experience problems playing recordable DVD
discs in some players. Symptoms include video artifacts, audio and/or video dropouts and playback suddenly stopping.
Our company cannot take responsibility for problems
playing discs recorded on this Recorder in other players.
Is
editing
DVD like
editing
a
video
tape?
No. When you edit a video tape you need one video
deck to play the original tape and another to record the
edits. With
DVD, you edit by making a 'Playlist' of what
play and when to play it. On playback, the Recorder
plays the disc according to the Playlist.
to
About word
'Original'
and
'Playlist'
Throughout this manual, you will often see the words
Original and Playlist to refer to the actual content and
the edited version.
?
?
content refers to what's
Original:
on
?
actually
recorded
the disc.
content refers to the edited version of the
Playlist:
disc
---
how the
Original
content is to be
played.
Disc type
Disc format
Recording
DVD-Video
Video format
n/a
Playback only
DVD-RW
Video
VR mode
Playback, Recording, Original/Playlist Editing
Video format
Video mode
Playback,
limited
Recording,
limited
Editing
DVD-R
Video format
Video mode
Playback,
limited
Recording,
limited
Editing
DVD+RW
+RW Video format
DVD+RW
Playback,
limited
Recording, Title/Chapter Editing
DVD+R
+R Video format
DVD+R
Playback,
limited
Recording,
format
Recording
(default)
mode
a
Functions
limited
Title/Chapter Editing
7
INTRODUC
DVD Recorder Overview
About DVD
(Continued)
Notes for
recording
?
This recorder cannot make
recordings
on
CD-R
This
or
on
CD-RW discs.
?
Our company takes no responsibility for recording failure due to power outages, defective discs, or damage
?
to the Recorder.
?
Fingerprints and small scratches on a disc can affect
playback and/or recording performance. Please take
proper
Disc types and
and
?
of your discs.
care
?
recording formats, modes,
?
This recorder
can
pre-recorded
DVD-Video
play
five different kinds of DVD discs:
?
discs, DVD-RW, DVD-R,
DVD+RW and DVD+R discs. The disc format for DVD-R
discs is
always
"Video format"---the
ed DVD-Video discs. This
DVD-R in
means
same as
that
once
pre-record-
finalized,
will take up
8
a
on
the disc.
a
?
DVD
play
regular
player.
By default, the DVD-RW disc format is Video Recording
(VR) format, though you can change this to Video format, if required. (Reinitializing the disc will erase the
contents of the disc.)
The recording mode is closely related to the disc format. If the disc format is Video Recording format, then
the recording mode is VR mode; if the disc format is
Video mode, then the recording mode is Video mode
(except for DVD-Video, which is not recordable, and so
does not have a recording mode).
Within the recording modes (which are fixed for them
whole disc) are the record settings. These can be
changed as required for each recording and determine
the picture quality and how much space the recording
you
can
times shown
are
not exact because the
variable bit-rate video
uses
means
that the exact
recording
compression.
depend
time will
the material
being recorded.
recording a TV broadcast, if the reception is
or the picture contains interference, the record-
When
poor
ing times may be shorter.
If you record still pictures
time may be longer.
The displayed times for
may not
disc.
settings
recording
recording
recorder
Notes :
?
The
or
audio
recording
exactly
add up to
always
only,
the
recording
and time
the
remaining
length of the
The
recording time available may decrease if you
heavily edit a disc.
If using a DVD-RW disc, make sure you change the
recording format (Video mode or VR mode) before
you record anything on the disc. See page 27 (Disc
Format) for how to do this.
When using a DVD-R disc, you can keep recording
until the disc is
full, or until you finalize the disc.
Before you start a recording session, check the
amount of recording time left on the disc.
?
When
using
DVD-RW disc in Video
a
time available will
title recorded
?
on
The Erase Title
only
increase if you
the disc.
hides the
only
option
(except
erase
the last
in the Title
title, it does
from the disc and increase
able
mode, recording
List-Original menu
actually erase the title
the recording time avail-
not
for the last recorded title
on a
DVD-RW
disc in Video
?
Overwrite
discs.
mode).
recording is
available
using
DVD+RW
DVD Recorder Overview
Restrictions
video
on
(Continued)
Remote Control
recording
copy-protected video using this
recorder. Copy-protected video includes DVD-Video
discs and some satellite broadcasts. If copy-protected
material is encountered during a recording, recording
will pause or stop automatically and an error message
will be displayed on-screen.
?V ideo that is 'copy-once only' can only be recorded
using a DVD-RW disc in VR mode with CPRM (see
below).
NTSC format signals from the analog or the DV
inputs is not recorded correctly with this recorder.
?V ideo signals in SECAM format (from the built-in TV
tuner or from the analog inputs) are recorded in PAL
Operation Range
?You cannot record
Point the Remote Control at the remote
Remote Control
Battery
and
Installation
Remove the
rear
battery
of the Remote
insert two R03
with
?
format.
sensor
press the buttons.
and
cover on
the
Control, and
(size AAA) batteries
correctly.
matched
Caution
Do not mix old and
batteries. Never mix different
new
types of batteries (standard, alkaline, etc.).
What is 'CPRM'?
CPRM is a copy protection system (with scramble system) only allowing the recording of 'copy once' broad-
Resetting
cast programs. CPRM stands for Content Protection for
If you observe any of the
Recordable Media.
The unit is
This Recorder is CPRM
you
can
compatible,
which
means
that
record copy-once broadcast programs, but you
a copy of those recordings. CPRM
cannot then make
recordings
can
only
be made
on
mode, and CPRM recordings
played
players
that
are
only be
specifically compatible with
can
CPRM.
?
but the power will not turn
The front
panel display
is not
The DVD Recorder is not
...you
on
can
working.
operating normally.
reset the DVD Recorder
as
follows:
Press and hold the POWER button for at least five
seconds. This will force the unit to power off.
Press the POWER button again to turn the unit back
on.
Copyright
?
following symptoms...
plugged in,
off.
DVD-RW discs format-
ted in VR
on
or
the DVD Recorder
Recording equipment should be used only for lawful
copying and you are advised to check carefully what
is lawful copying in the area in which you are making
a copy. Copying of copyright material such as films or
music is unlawful unless permitted by a legal exception or consented to by the rights owner.
Unplug
the power
plug it in
and then
cord, wait
at least five
seconds,
again.
This
product incorporates copyright protection technology that is protected by method claims of certain
U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses
only, unless otherwise authorized by Macrovision corporation. Reverse engineering or disassembly is prohibited.
?
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE.
IN CASE OF 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE
USER SWITCH THE CONNECTION TO THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL
625p
DVD
RECORDER,
PLEASE CONTACT OUR CUSTOMER SERVICE
CENTER.
9
INTRODUC
DVD Recorder Overview
(Continued)
Precautions
Notes
Handling
the unit
Handling
on
When
shipping the unit
The original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packaged at the factory.
Discs
discs
Do not touch the
disc
by
the
playback side of the disc. Hold the
edges so that fingerprints will not get on the
surface. Do not stick paper
or
tape
the disc.
on
When
setting up the unit
picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. In this case, position
The
the unit away from the TV, VCR,
unit after removing the disc.
or
radio,
turn off the
or
Storing
After
To
keep
Do not
near
the surface clean
use
volatile
liquids,
such
as
the unit. Do not leave rubber
contact with the unit for
leave marks
on
a
insecticide spray,
or
long period
plastic products in
of time. They will
discs
playing,
as there may be a considerable
increase inside the car.
a
use a
the unit
solution. Do not
benzine,
or
lightly
use
thinner,
are
moistened with
strong
as
discs
Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the centure
soft, dry cloth. If the surfaces
soft cloth
temperature
the surface.
To clean the cabinet
Use
case.
light,
Cleaning
Cleaning
store the disc in its
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
a
extremely dirty,
detergent
mild
solvents such
these
as
might damage
ter outward.
alcohol,
the surface
of the unit.
Yes
To obtain
10
No
clear
picture
The DVD Recorder is a high-tech, precision device. If
the optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
vinyl
records.
Front Panel
POWER
Switches the DVD Recorder ON
OFF.
or
Starts
recording.
REC (z)
repeatedly
recording time.
Press
to set the
INPUT 2
(VIDEO
IN/AUDIO IN
(Left/Right))
STOP
Connect the audio/video
output of an external source
(Audio system, TV/ Monitor, VCR, Camcorder, etc.).
Display
Pause
window
Shows the current status of the
Stops playback
or
(x)
recording.
INTRODUC
PAUSE (X)
playback or recording temporarily,
press again to exit pause mode.
DVD Recorder.
PLAY
To
INPUT 2
a
(N)
disc.
(S-VIDEO IN)
Connect the S-Video
external
back
play
output of
an
(TV/ Monitor, VCR,
Camcorder, etc.).
source
OPEN/CLOSE
Opens
DV INPUT
closes the disc
(Z)
tray.
Power indicator
Connect the DV
output of
or
a
Lights up red when
the recorder is in
digital
camcorder.
standby
Disc
Insert
a
mode.
Tray
disc here.
PROG.
(+/-)
Scans up or down through
memorized channels.
m/.
Go to
beginning
of current
chapter/
Press and hold for two seconds for
a
track
fast
or
to
reverse
previous chapter/track.
search during playback.
>/M
Go to NEXT
Press and hold for two seconds for
a
fast forward search
chapter/track.
during playback.
Remote Sensor
Point the DVD Recorder remote control here.
11
Function
Display
Window
REC The Recorder is
Disc type indicators
Indicates the type of disc loaded.
recording.
Indicates that the recorder is timer
recording
or
that
a
timer
recording is
programmed.
HQ, SQ, LQ, EQ
Indicates
ST Indicates
BIL
a
Indicates when
stereo broadcast is
a
TRK
Indicates current
mode.
received.
BILINGUAL broadcast
is
CHP
being
recording
being
chapter
received.
number.
Indicates current track number.
TITLE
Indicates
current title number
DVD
SVC D
+RW
-
TITLE
TRK
CHP
BIL
ST
HQSQLQEQ
-RW
Character indicators
Indicates clock, total playing time, elapsed time,
chapter/track number, channel, etc.
12
title
number,
REC
Remote Control Overview
POWER
Switches the recorder ON
OFF.
or
PIP
Selects PIP function
on or
off.
0-9 numerical buttons
Selects numbered
in
options
a menu.
the
input to use for recording
(Tuner, AV1-2, or DV IN).
AUDIO
Selects
an
audio
language (DVD)
or an
audio channel
(CD).
SUBTITLE
Selects
a
subtitle
language.
ANGLE
Selects
a
DVD
angle,
camera
if available.
REC
Starts
recording.
(z)
Press
repeatedly to set
the recording time.
REC MODE
Selects the
mode:
recording
HQ, SQ, LQ,
or
EQ.
TIMER REC
Timer Record
Displays
a
Program
track number
List
or a
on
mark
on
POWER: Turns the TV
AV: Selects the TV's
Adjusts TV's volume.
Temporarily turns TV sound
OFF, press again to restore.
SKIP(./>)
Go to next
chapter or track. Returns to
beginning of current chapter or track or
go to previous chapter or track.
SCAN(m/M)
Search backward
PAUSE/STEP
N
(about
the
of
the
image.
length
the disc
TV
typical
commercial).
a
TITLE
Displays
the disc's Title menu, if
available.
THUMBNAIL
a
thumbnail
picture
chapter
Original and Playlist
in the
menu.
CHP ADD
Inserts
a
chapter
marker when
playing/
recording.
MARKER
Marks any
point during playback.
SEARCH
Displays
Marker Search
menu.
PROGRAM
Add the track to the
Program
or
recording.
MENU/LIST
Accesses
or
menu on a
Playlist
DVD
List.
disc, Title List
menu.
SETUP
Accesses
or removes
the
Setup
menu.
ENTER
Acknowledges menu selection.
Displays information while viewing
a
TV program.
b / B / v / V
Selects
an
PR v / V
Scans up
channels.
(left/right/up/down)
option
in the
menu.
(up/down)
or
down
through
memorized
DISPLAY
Accesses On-Screen
RETURN
for the
use
(x)
Stops playback
-
for
playback.
STOP
-
Selects
current title and
(PLAY)
Starts
the
INSTANT SKIP
on
(X)
playback or recording temporarily, press again to exit pause mode.
menu.
DVD video
forward.
or
Pause
ZOOM
Skips
off.
MUTE:
-
15 seconds forward
on or
source.
PR +/--: Selects TV's channel.
-
Marker Search
Enlarges
tray.
TV Control Buttons
menu.
CLEAR
Removes
(Z)
and closes the disc
VOL +/--:
AV
Changes
OPEN/CLOSE
Opens
Removes the
Displays
Display.
(O)
the
menu.
menu
of
a
video CD
with PBC.
3D SURR.
Selects 3D SURROUND
during
playback.
RANDOM
Plays
tracks in random order.
REPEAT
Repeat chapter, track, title,
all.
A-B
Repeat
sequence.
13
INTRODUC
Rear Panel Connections
AERIAL
Connect the aerial to this terminal.
COAXIAL
Connect to
(Digital audio out jack)
digital (coaxial) audio equipment.
COMPONENT VIDEO OUT/PROGRESSIVE SCAN
Connect to
a
TV with Y Pb Pr
VIDEO OUT/AUDIO OUT
Connect to
a
(Y
Pb
Pr)
inputs.
(Left/Right)
TV with video and audio
VIDEO IN 1 / AUDIO IN 1
inputs.
(Left/Right)
Connect the audio/video
output of an external source
(Audio system, TV/Monitor, VCR, Camcorder).
Cooling
fan
AC Power Cord
Plug
OPTICAL
S-VIDEO OUT
a
S-Video
Input
RF. OUT
Passes the
signal
from the AERIAL to your TV/monitor
Caution
Do not touch the inner
pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
14
on
source.
(Digital audio out jack)
digital (optical) audio equipment.
Connect to
Connect to
into the power
TV.
Connections
Connecting
to the Aerial
Remove the aerial cable plug from your TV set and
insert it into the aerial socket at the back of the
recorder.
socket
aerial
on
Plug
one
end of the aerial cable into the TV
the DVD recorder and the other end into the
input
socket
on
DVRHOKUP
your TV set.
RF coaxial connection
Connect the RF. OUT
jack on the DVD Recorder to the
input jack on the TV using the 75-ohm Coaxial
Cable supplied (R). The RF. OUT jack passes the signal
through from the AERIAL jack.
aerial
Rear of TV
Aerial
ANTENNA
INPUT
AUDIO INPUT
L
VIDEO
INPUT
R
R
Rear of DVD Recorder
15
Connections
(Continued)
Connections to Your TV
Tips
your TV and other equipment you wish
to connect, there are various ways you could connect
the recorder. Use only one of the connections
Depending
on
Make
the
of the
one
following connections, depending
existing equipment.
on
of your
capabilities
described below.
Please refer to the manuals of your TV, VCR, Stereo
or other devices as necessary to make the
System
best connections.
Video connection
Connect the VIDEO OUT
the video in
Caution
--
Make
sure
the DVD Recorder is connected
the TV. Tune the TV to the correct video
directly to
input chan-
nel.
--
phono
in
jack (record deck)
jack
of your audio sys-
tem.
--
jack on
using
the TV
on
the DVD Recorder to
the video cable
Connect the S-VIDEO OUT
cable
jack
on
jack
the TV
the DVD Recorder
on
using
the S-Video
(S).
Video connection
Component
Do not connect your DVD Recorder via your VCR.
The DVD image could be distorted by the copy pro-
Connect the COMPONENT VIDEO OUT
tection
TV
system.
jacks on the
corresponding input jacks on the
cable (C).
DVD Recorder to the
using
an
Y Pb Pr
Progressive Scan (ColorStream Pro)
If your television is
Rear of TV
S-VIDEO
INPUT
COMPONENT VIDEO INPUT
Y
Pb
Pr
AUDIO INPUT
L
VIDEO
INPUT
R
(V).
S-Video connection
to the S-Video in
Do not connect the DVD Recorder's AUDIO OUT
to the
jack
high-definition
a
or
connection
"digital ready"
television, you may take advantage of the recorder's
progressive scan output for the highest video resolution
possible. If your TV does not accept the Progressive
Scan format, the picture will appear scrambled if you try
Progressive
Scan
the recorder.
on
Connect the COMPONENT VIDEO OUT /
PROGRESSIVE SCAN
S
C
AV
in
corresponding
cable (C).
jacks
jacks
on
on
the TV
the recorder to the
using
the Y Pb Pr
Notes :
Set the
Progressive to "On" on the setup menu for
progressive signal, see page 22.
Set the progressive to "Off" by removing any disc
from the unit and close the disc
DISC" is
displayed
on
the
tray. See that "NO
display
window. Then
press STOP and hold it for five seconds before
releasing it.
Progressive
scan
video connections
does not work with the
(yellow
VIDEO OUT
analog
jack) or S-
VIDEO connection.
Rear of DVD Recorder
Audio
(Left/Right) Connection
Connect the left and
right
AUDIO OUT
Recorder to the audio left and
using
the audio cables
(record deck)
16
of your audio
IN
jacks of
jacks on
the DVD
the TV
Do not connect the DVD
(A).
jack
Recorder's AUDIO OUT
right
to the
system.
phono
in
jack
Connections
Connecting
(Continued)
to an
Amplifier
Rear of DVD Recorder
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic ll/
Pro Logic
Connect the Left and
Right
your amplifier, receiver,
audio cables (A).
or
jacks on the
in jacks on
system, using the
stereo
right
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2, or DTS)
1
Connect
one
DVRHOKUP
AUDIO OUT
DVD Recorder to the audio left and
X
A
O
of the DVD Recorder's DIGITAL
AUDIO OUT
jacks (OPTICAL O or COAXIAL X) to
the corresponding in jack on your amplifier. Use an
optional digital (optical O or coaxial X) audio cable.
COAXIAL
DIGITAL INPUT
You will need to activate the recorder's
2 put. (See
Digital
"Audio"
on
page
digital
L
R
AUDIO INPUT
OPTICAL
DIGITAL INPUT
out-
Amplifier (Receiver)
24).
Multi-channel sound
A
digital multi-channel
sound quality. For this
connection
provides
the best
you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats
supported by your DVD Recorder
(MPEG 2, Dolby Digital and DTS). Check the receiver
manual and the logos on the front of the receiver.
Caution:
Due to the DTS
Licensing agreement, the digital output
digital out when DTS audio stream is
will be in DTS
selected.
Notes :
--
If the audio format of the
digital output
does not match
the
capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
--
Six Channel
Digital Surround Sound via digital cononly be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
nection
--To
see
the audio format of the current DVD in the
on-
press AUDIO.
This recorder does not perform internal
screen
--
can
display,
decoding
of
a
DTS sound track. To
multi channel
surround, you
recorder to
DTS
recorder's
a
digital
must connect this
compatible
audio
(2 channel)
enjoy DTS
receiver via
one
of this
outputs.
17
Connections
Accessory
(Continued)
Audio/Video
(A/V)
Connections to DVD Recorder
Connect the
input jacks (AV1, AV2) on the DVD
jacks on your accessocomponent, using audio/video cables.
Recorder to the audio/video out
ry
Connecting
Using
If you use the S-VIDEO IN jack on the front panel, the
VIDEO IN jack on the front panel is not available.
a
DV
digitally
panel DV IN jack, it is possible to
digital camcorder or DVD-R/RW recorder
transfer DV
tapes
or
DVD-R/RW discs to
DVD-R/RW.
Use
Note :
Digital Camcorder
the front
connect
and
a
a
DV cable
(not supplied)
to connect the DV in/out
of your DV camcorder/video deck to the front
DV IN jack of this recorder.
jack
panel
Note :
Jack
panel of Accessory Component
(VCR, Camcorder, etc.)
This
jack is for connection to DV digital camcorder only.
compatible with digital satellite tuners or D-VHS
It is not
video decks.
S-VIDEO
OUTPUT
AUDIO
OUTPUT
DV
R
Digital
OR
DV
IN/OUT
L
VIDEO
OUTPUT
OR
Rear of
DVD Recorder
18
Front of
DVD Recorder
Front of DVD Recorder
Camcorder
Pre-operation Setup
Initial
In this
General
Settings
menu
system, there
several ways to
are
Auto
cus-
settings provided. Most menus consist of
three levels to set up the options, but some require
greater depth for the variety of settings. If you press
SETUP, only the first and second level of the menu sys-
Programming
tomize the
tem will appear
on
the TV
to
help
see
"B"
The third level
can
be
B. For
displayed by pressing
els, you will
screen.
on
the
navigating the menu levright side of the menu label
This DVD Recorder is
synthesized
tuner
equipped with a frequency
capable of receiving up to 88 TV
channels.
Preparation:
Connect the DVD Recorder to the desired
shown in
Connecting
To
bring up and exit the Menu:
Press SETUP to bring up the menu. A second press of
SETUP will take you back to initial screen.
as
Program
TV
menu
1
2
Setup
menu
appears.
Use v / V to select the General
3
4 option.
5
6
move
While the desired item is
option.
selected, press B
to
Press B to
"Start" icon is
Use v / V to select the second desired
option
option.
option.
is selected, press B to
to the second level.
Use v / V to select the Auto
to the second level.
Press B to
11%
Press SETUP.
The
While the General
appears.
Use v / V to select the desired
move
Searching
Ratio
Mode
Factory Setting
Operation
Setup
Edit
Aspect
Display
Stop
PBC
Press SETUP.
The
3
4
5
6 press
move
Programming
to the third level.
highlighted.
Press ENTER to
begin the channel search.
automatically cycle through all
channels in the area and place them
The tuner will
move
to the third level.
available
setting
then
ENTER to confirm your selection.
Some items require additional steps.
Press SETUP to exit the
in
the tuner's memory.
Use v / V to select the desired
7
type of aerial,
page 15.
Progressive Scan
To go back to the previous level:
Press b on the remote control.
General
Programming
Clock Set
To go to the next level:
Press B on the remote control.
2
on
you go to the next level.
Auto
1
to the Aerial
Setup
menu.
Note :
After you have connected your DVD recorder for the
very first time. If you press SETUP for initial setting, you
can only set the "Auto Programming" option. Then you
can
set the other
options.
19
DVRSETUP
Pre-operation Setup (Continued)
Program
Edit
You
a
can
move,
edit
8
channel
manually (add, delete,
Press RETURN
List
Program
Programming
You
Edit
Program
Edit
nels
Clock Set
TV
Aspect
Ratio
Edit
perform
manually.
can
a
search to select and store TV chan-
PBC
a program on the Program List
then press ENTER.
Program List options appears on the left side of the
Factory Setting
Program
Display
1. Use v / V to select
Mode
Progressive
menu
Scan
List
menu.
2. Use v / V to select
1
2
'Program
options then press ENTER.
Program Edit menu appears.
Press SETUP.
The
Setup
menu
appears.
Use v / V to select the General
While the General
move
option
Edit'
option
from the
option.
PR
3
4 press
Program
name,
etc.).
Auto
to exit
(O) repeatedly
menu.
is selected, press B to
Seek Ch.
MFT
C2
1
OK
0
to the second level.
Use v / V to select the
B to
"Edit" icon is
move
Program
Edit
option
then
to the third level.
3. See the
highlighted.
Press ENTER.
5 Program
List
menu
b / B
appears.
PR-01
on
below to
use
Program
Edit
(left/right):
Moves the
cursor
to the
previous
or
next column.
PR
Ch.
MFT
Station
01
C12
+10
BBC1
v / V
02
C23
0
BBC2
cursor
03
C7
0
ITV
04
C27
-10
CH2
05
C17
0
(up/down): Changes
position.
the
PR: Indicates program number
CHTV
06
C33
0
WEST
07
C34
+20
ANGLI
08
C47
0
ABC
09
C10
-60
TV2
Seek: Searches
a
Searching stops
setting
at the current
(display only)
station
b / B to select Seek
10
automatically. Use
option then press v / V.
when the DVD recorder tunes in
a
station.
11
Close
descriptions
menu.
Move
Page Up/Down
Select
Ch.:
Changes the channel number to
option then press v / V.
edit. Use b / B
to select Ch.
6Usev/VtoselectaPRnumberthenpress
ENTER.
Program List options
display.
appears
on
the left side of the
menu
7
Use v / V to select
an
then press ENTER
option
to confirm.
Program
Edit
Program
Edit: Edits the select-
Station Rename
ed program.
Move
Station Rename: Edits the sta-
Delete
tion
name.
Move: Moves the
location
on
program's
the program list.
Delete: Deletes the program
from program list.
20
MFT:
Changes the frequency for fine tuning.
Useb/BtoselectMFToptionthenpressv/V.
4. Choose OK then press ENTER to confirm the
and returns to the Program List menu.
setting
Pre-operation Setup (Continued)
Edit
Program
Sorting
(Continued)
You
Station Rename
You
Names
independently.
be
can
long.
a program on the Program List
then press ENTER.
Program List options appears on the left side of the
menu
List
manually
program's position
on
the
Program
List
1. Use v / V to select
a program on the Program List
then press ENTER.
Program List options appears on the left side of the
menu
1. Use v / V to select
Program
sort the
menu.
stations
can name
up to 5 characters
can
TV channels
menu.
Program
Program List options then
Keyboard menu appears.
option
from
press ENTER.
menu.
2. Use v / V to select 'Move'
options
2. Use v / V to select 'Station Rename'
List
option
from
Program
List
then press ENTER.
3. Use v / V to select
a
desired
position
then press
ENTER to store.
Deleting
a
program
ABC
You
Alphabet Capital
123456789
0
ABCDEFGH
J
I
can
delete
3. Enter
a name
the
Program
List
menu.
a program on the Program List
then press ENTER.
Program List options appears on the left side of the
Program
Space
on
menu
KLMNOPQRST
Cancel
program
1. Use v / V to select
UVWXYZ
OK
a
Delete
List
menu.
2. Use v / V to select 'Delete'
for the station. Use vVbBto select
options
option from Program List
Program is deleted.
then press ENTER. The
character then press ENTER to confirm your selection.
a
?
Alphabet Capital:
case
?
Alphabet
case
?
Switches the
keyboard
upper
characters.
Small: Switches the
keyboard
to lower
characters.
Symbol:
Switches the
keyboard
to
symbol
char-
acters.
?
?
?
?
OK: Select to finish.
Cancel: Select to exit the
cursor
?
Inserts
menu.
space at the cursor position.
Delete: Deletes the previous character at the
Space:
a
position.
b / B: Moves
cursor
to left
or
right.
Tip
Remote control buttons for
Numbers
ing
(0~9): Enters
location
on
entering
a name
the character of
correspond-
the selected column.
4. Choose 'OK' icon then press ENTER to fix the
and returns to the Program List menu.
name
21
DVRSETUP
Pre-operation Setup (Continued)
Clock Set
1
2
3
4
5
Display
Press SETUP.
The
Setup
Display
menu
Use v / V to select the General
You
menu.
-
move
is selected, press B to
option
-
Use v / V to select the Clock Set
can
only
when the TV
Aspect
choose:
Letter Box:
picture with bands on the
portions of the screen.
Automatically displays the wide picture on
the entire screen and cuts off the portions
Displays
Pan Scan:
option.
wide
a
that do not fit.
to the third level.
move
works
setting
upper and lower
to the second level.
Press B to
Mode
Ratio is set to "4:3".
appears.
While the General
Mode
Auto
Programming
Program
Edit
Clock Set
Auto
Programming
Program
TV
Edit
Clock Set
TV
Aspect
Manual
Ratio
Mode
Progressive Scan
Ratio
Letter Box
Pan Scan
PBC
Display Mode
Progressive
Aspect
Display
Year
Factory Setting
----
Scan
Date
PBC
Factory Setting
--
Time
--
/
:
--
--
Progressive Scan
6
Enter the necessary information for date and
time.
b / B
or
(left/right):
Moves the
cursor
to the
previous
next column.
v / V
cursor
(up/down): Changes
position.
the
setting
at the current
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the COMPONENT VIDEO OUT /
PROGRESSIVE SCAN jacks, but are connecting the
DVD Recorder to a standard (analog) television, set
Progressive Scan to OFF.
If you are using the COMPONENT VIDEO OUT jacks
for connection to a TV or monitor that is compatible
with a progressive scan signal, set Progressive Scan
?
?
7
Press ENTER to confirm your setting, then
press SETUP to exit the Setup menu.
to ON.
TV
You
-
-
Aspect
can
Ratio
Auto
Programming
Program
choose:
4:3:
Select when
a
standard 4:3 TV is connected.
16:9:
Select when
a
16:9 wide TV is connected.
Auto
TV
Aspect
Display
Programming
Program
Edit
Clock Set
Ratio
Mode
Progressive Scan
OFF
PBC
ON
Factory Setting
Edit
Clock Set
TV
Aspect
Display
Ratio
Mode
4:3
16:9
Caution
Progressive Scan
PBC
Factory Setting
Once the
setting for progressive scan output is entered,
image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
an
to ON in error, you must reset the unit.
1)
Remove any disc from the unit and close the disc
tray. See that "NO DISC" is displayed on the display
window.
2)
Press STOP and hold it for five seconds before
releasing
it. The video
standard
setting
visible
22
on a
and
output will be restored
to the
picture will once again be
conventional analog TV or monitor.
a
Pre-operation Setup (Continued)
PBC
Language
The PBC
(PBC)
-
ON:
setting
to ON
or
be
can
changed.
Set
Playback
Control
OFF.
Video CDs with PBC
are
played according
to the
PBC.
-
Select
a
language
for the
Setup
and
menu
on-screen
display.
OFF: Video CDs with PBC
as
Display Language
are
played
the
same
DVRSETUP
way
Audio CDs.
Auto
Programming
Program
Edit
Clock Set
TV
Aspect
Display
Ratio
Mode
Progressive Scan
PBC
OFF
Factory Setting
ON
Disc
Language
Select
-
Factory Set
-
Note :
options can
Country Code)
and Subtitle.
disc is
selected.
If you need to, you can reset the Recorder to all its factory settings. Select ''Set'' icon then press ENTER.
Some
a language for the disc's Menu, Audio,
Original: The original language set for the
not be reset.
(Rating, Password,
and
Other:
To select another
select Other
language,
then press ENTER. Use the numbered
and ENTER buttons to key-in the
option
corresponding 4-digit number according to
the language code list on page 55. If you a
mistake before pressing ENTER, press b
repeatedly to delete one by one and correct
it.
Auto
Programming
Program
Edit
Clock Set
TV
Aspect
Ratio
Display Mode
Progressive
Original
Disc Menu
English
Disc Audio
French
Disc Subtitle
German
Spanish
Scan
Italian
PBC
Factory Setting
Display Menu
Chinese
Set
Polish
Other
----
23
Pre-operation Setup (Continued)
Audio
Sampling Frequency
Each DVD disc has
a
variety of audio output options.
Output according to the type
If your Receiver
or Amplifier is NOT capable of handling
signals, select 48 kHz. If this choice is made,
unit will automatically convert any 96 kHz signals to
Set the Recorder's Audio
96 kHz
of audio
this
system you
use.
48 kHz
so your system can decode them.
If your Receiver or Amplifier is capable of handling
96 kHz signals, select 96 kHz. If this choice is made,
Dolby Digital
PCM: Select when connected to
stereo
amplifier.
a
2-channel
The DVD Recorder's
digital
audio out-
digital
puts sound in the PCM 2ch format when you play
DVD video disc recorded
on
the
this unit will pass each
any further processing.
a
Dolby Digital recording
Dolby Digital
system.
DTS
Bitstream: Select "Bitstream" if you connected the DVD
Recorder's DIGITAL OUT jack to a Dolby Digital
MPEG
decoder
(or an Amplifier
Dolby Digital decoder).
or
other
equipment
Dolby Digital
PCM
DTS
Bitstream
with
type of signal through without
a
Sampling Freq.
48KHz
DRC
96KHz
Vocal
MPEG
DRC
Sampling Freq.
(Dynamic Range Control)
DRC
With the DVD
format, you can hear a program's soundtrack in the most accurate and realistic presentation
Vocal
possible,
thanks to
digital
audio
technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
DTS
and the
OFF: If you select "OFF", the DTS
the DIGITAL OUT jack.
signal
is not
output
through
at
a
quietest ones). Then, you may
losing clarity
lower volume without
Amplifier
other
equipment
with
DTS
a
a
movie
of sound. Set
DRC to ON for this effect.
Bitstream: Select "Bitstream" if you connected the DVD
Recorder's DIGITAL OUT jack to a DTS decoder (or an
or
listen to
Dolby Digital
DTS
decoder).
MPEG
Sampling Freq.
Dolby Digital
DTS
OFF
MPEG
Bitstream
DRC
OFF
Vocal
ON
Sampling Freq.
DRC
Vocal
Vocal
MPEG
Set Vocal to ON
PCM: Select when connected to
stereo
amplifier.
a
2-channel
The DVD Recorder's
digital
digital
audio out-
puts sound in the PCM 2ch format if you play
video disc recorded
on
the MPEG2
a
Amplifier
or
other
equipment
with
recording system.
a
MPEG
playing.
only
DTS
24
multi-channel karaoke
decoder).
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
OFF
ON
Dolby Digital
MPEG
PCM
Sampling Freq.
Bitstream
DRC
a
mix into normal stereo sound.
Vocal
Vocal
when
The karaoke channels
DVD
Bitstream: Select "Bitstream" if you connected the DVD
Recorder's DIGITAL OUT jack to an MPEG decoder (or
an
DVD is
on
the disc will
Pre-operation Setup (Continued)
Lock
If you
(Parental Control)
If you
Set Password
Changing
the
word,
4-digit
forget your password, to clear the current passfollow the procedure below.
1. Press SETUP to
code
code
forget your 4-digit
display
the
Setup
menu.
2. Use the Number buttons to enter the
Set Password
Chang
Rating
Delete
New Password
OK
Code
Country
number
6-digit
"210499".
DVRSETUP
3. Select "Yes" then press ENTER. The 4-digit password is cleared. Enter a new code as shown left.
Rating
Movies
on
children.
DVDs may contain
information that
certain
1
2
3
4
5
6
Press SETUP.
The
Setup
menu
move
option
Ratings
option.
is selected, press B to
to the second level.
Use v / V to select the Set Password
move
country-dependent.
are
alternate
or
to
rated
scenes are
The Parental Control
being played
played with
scenes.
Set Password
No limit
Code
Country
to the third level.
Level 8
(Adult)
Level 7
Level 5
If you have not entered
Enter a 4-digit password
password yet;
using the numbered buttons to create a personal 4-digit security password,
then press ENTER. Enter the 4-digit password again
and press ENTER to verify when "OK" is highlighted.
If you have already entered a password;
Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security password, then press ENTER when "OK" is highlighted.
a
Level 4
Level 3
Level 2
Level 1
1
2
Follow
steps 1-3
a
mistake before
to delete
pressing ENTER,
password numbers one by
press b
one
then correct it.
While
"Change"
is selected, press ENTER.
If you select "Delete" then press ENTER. The password is deleted.
Enter
as
Use v / V to select the
move
Follow
tons. One
Eight (8)
has the least
has the most
Tip
ing
one
by
in full.
a
scenes
rating
not suit-
for the
scenes with the same rating or
played. Higher rated scenes will not be
unless
an
alternate
disc. The alternate
numbers
limit, Parental Control is
play
Recorder, all disc
played
password
restrictions.
playback
able for children. If you set
ENTER
to delete
restrictions.
Level 1 to 8: Some discs contain
lower will be
repeatedly
to the third level.
not active. The disc will
4-digit password again and press
to verify when "OK" is highlighted.
pressing ENTER, press
Rating option.
No limit: If you select No
a
mistake before
(Set
6 as shown above to the left
Enter the
a
shown above to the left
3
step
(Set
4 Password).
5Selectaratingfrom1to8usingthev/Vbut(1)
playback
4-digit password using the numbered
buttons to create a personal 4-digit security
password then press ENTER when "OK" is
highlighted.
If you
(Kids)
Password).
Press B to
If you make
9
disc
complete
Level 6
repeatedly
8
to the
the disc. These
feature allows you to prevent discs from
by your children or to have certain discs
option.
Tip
7
applies
scenes on
Rating
Press B to
not suitable for
from Level 1 to 8, and alternatively, more suitable
scenes are available for selection on some discs.
appears.
Use v / V to select the Lock
While the Lock
scenes
Therefore, discs may contain Parental Control
or a
lower
one.
scene
If
no
scene
found, playback will stop. You
one
password
then correct it.
change
the
the
rat-
scene
must enter the
rating
on
same
suitable alternate
b
or
is available
must have the
is
4-digit
play
level in order to
the disc.
6
Press ENTER to confirm your rating selection,
then press SETUP to exit the menu.
25
Pre-operation Setup (Continued)
Country
Code
Enter the code of
a
Recording
country/area
used to rate the DVD video
(See "Country Codes",
whose standards
disc, referring
were
to the list
55.).
page
Record Mode Set
You
can set the picture quality for recording; HQ (High
Quality), SQ (Standard Quality), LQ (Low Quality), EQ
(Extend Quality).
Set Password
Rating
Country
1
US
Code
Rec Mode Set
HQ
Rec
SQ
Aspect
DV Rec Audio
LQ
Auto
EQ
Chapter
Press SETUP.
The
Setup
menu
appears.
2
Use v / V to select the Lock
3
4
5
6
While the Lock
move
option
option.
Record
is selected, press B to
to the second level.
Use v / V to select the
Press B to
move
Country
When
option.
recording
in VR mode formatted DVD-RW
recording aspect ratio
you're recording (16:9 widescreen, or
you
Code
Ratio
Aspect
can
set the
to the third level.
Aspect
DV Rec Audio
password yet;
using the numbered buttons to create a personal 4-digit security password,
then press ENTER. Enter the 4-digit password again
and press ENTER to verify when "OK" is highlighted.
If you have already entered a password;
Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security password, then press ENTER when "OK" is highlighted.
a
If you
a
mistake before
to delete
pressing ENTER, press
password numbers one by
Auto
4:3
16:9
Chapter
DV Record Audio
b
one
port.
Some
then correct it.
digital
camcorders have two stereo tracks for
audio. One is recorded at the time of
7
Select the first character
8
Shift the
using
the v / V
using B buttons and select
using v / V buttons.
the
second character
Press ENTER to confirm your country code
then press SETUP to exit the menu.
9 selection,
shooting; the other
over-dubbing after shooting.
On the Audio 1 setting, the sound that was recorded
while shooting is used.
On the Audio 2 setting, the over-dubbed sound is used.
is for
buttons.
cursor
Rec Mode Set
Rec
26
standard).
You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV IN
Tip
repeatedly
4:3
Rec Mode Set
Rec
If you have not entered
Enter a 4-digit password
disc,
to suit the material
Aspect
DV Rec Audio
Audio 1
Auto
Audio 2
Chapter
Pre-operation Setup (Continued)
Auto
Chapter
7
When
recording, chapter markers are put in at the
specified interval. You can set this interval to 5 minutes,
10
minutes,
es
automatic
15 minutes. If you select
or
chapter marking off,
no
For
use b
DVD-RWs,
Mode
(Vr
Mode
or
/ B to select
Video
Mode)
a
Disc Format
then press
ENTER.
For
DVD+RWs, go
to
None, it switch-
separations.
step 8.
Disc Format
Select
a
Mode.
Rec Mode Set
Vr Mode
Rec
Video Mode
Aspect
DV Rec Audio
Auto
None
Chapter
5 Min
8
10 Min
15 Min
Use b / B to select "Yes" then press ENTER.
It takes a few moments to format the disc.
Disc Format
All data
on
the disc will be deleted.
Proceed?
Yes
No
Disc
Caution
Disc Format
If you load a completely blank disc, the "Disc Format"
menu will appear. Select "Yes" then press ENTER. The
Recorder will initialize the disc.
DVD-R: The Recorder initializes the disc for Video
mode. The
mode will
recording
always
be Video
If you want to change the disc format,
recorded on the disc will be erased.
everything
Disc Protect
When
recording
in DVD+RW / +R disc
mode.
matted DVD-RW
DVD-RW: The Recorder initializes the disc for VR
recording, editing
mode.
need to unlock the disc to make
disc,
or
set to ON to
deleting
or
VR mode for-
prevent accidental
of the disc loaded. If you
edits, select OFF.
DVD+R / DVD+RW: The Recorder initializes the disc.
Also, you
can
format the disc from the
Setup
menu as
below.
Disc Format
Finalize
Disc Label
Disc Protect
Disc Format
OFF
ON
Start
Finalize
Disc Label
Disc Protect
1
2
3
4
5
6
Press SETUP.
The
Setup
menu
appears.
Use v / V to select the Disc
While the Disc
move
option
option.
is selected, press B to
to the second level.
Use v / V to select the Disc Format
Press B to
move
"Start" icon is
option.
to the third level.
highlighted.
Press ENTER.
Disc Format
menu
appears.
27
DVRSETUP
Pre-operation Setup (Continued)
Finalize
Disc Label
Finalizing 'fixes' the recordings in place so that the disc
be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu for
navigating the disc. This is accessed by pressing
can
MENU/LIST
or
TITLE.
Use this to enter
for the disc. This
a name
name
appears when you load the disc and when you
disc information on-screen.
?
The disc
?
For discs formatted
will
see
display
be up to 21 characters long.
on a different DVD Recorder, you
limited number of characters.
name can
only
a
Caution
After
you've
finalized
DVD-RW,
or a
anything
else
a
disc
recording
on a
Disc Format
DVD-R,
Finalize
DVD+R
on
disc, you can't edit or record
that disc except on a DVD+RW
Edit
Disc Label
Disc Protect
disc.
Disc Format
Finalize
Finalize
Disc Label
Unfinalize
Disc Protect
Follow
1
steps 1-3
shown Disc Format
as
Use v / V to select the Disc Label
1
2
3
4
Follow
steps
1-3 as shown
on
page 27
(Disc
Format).
2
3
4 Keyboard
Press B to
Use v / V to select the Finalize
move
"Edit" icon is
option.
page
option.
to the third level.
highlighted.
Press ENTER.
Press B to
Finalize is
move
to the third level.
menu
highlighted.
appears.
DVD-RW
Press ENTER.
Finalize
menu
Alphabet Capital
appears.
Finalize
Yes
OK
finalizing
5
the disc.
Note :
finalization takes
how much is recorded
titles
on
the disc. A
8 minutes
or more
on
heavily
on the type of disc,
disc, and the number of
depends
the
recorded disc
can
?
take up to
?
to finalize.
Enter
a name
Cancel
Delete
Space
for the disc. Use vVbBto select
character then press ENTER to confirm your
selection.
Alphabet Capital:
case
Alphabet
case
Switches the
keyboard
to
characters.
Small: Switches the
keyboard
to lower
characters.
Symbols:
Switches the
keyboard
to
symbol
char-
acters.
Tip
?
If you load a DVD-RW that has already been finalized,
you can 'unfinalize' it by choosing Unfinalize from the
menu.
After
doing this,
you
can
edit and
OK: Select to finish.
?C ancel: Select to exit the
?
re?
record onto the disc.
6
7
Inserts
menu.
space at the cursor position.
Delete: Deletes the previous character at the
Space:
cursor
?
28
I
a
upper
?
Finalize
J
No
The recorder starts
long
0
ABCDEFGH
UVWXYZ
Select "Yes" then press ENTER.
How
123456789
KLMNOPQRST
Do you want finalization?
5
on
27.
a
position.
b / B: Moves
cursor
to left
or
right.
Choose OK then press ENTER to
and return to the
Setup
Press SETUP to exit the
menu.
menu.
save
the
name
Pre-operation Setup (Continued)
Overview for the On-Screen
This manual
Disc Information On-screen
Display
You
operating the
require specific operation
or allow only limited operation during playback. When
this occurs, the symbol
appears on the TV screen,
indicating that the operation is not permitted by the DVD
loaded
Recorder
2
gives
basic instructions for
can
display
Display
various information about the disc
on-screen.
DVD Recorder. Some DVDs
or
is not available
Displaying
the disc.
Information While
While
to
on
viewing
display the
1
Watching
information
To
the
the On-Screen Display, press
repeatedly until it disappears.
descriptions on the following pages for
explanations of displays as a disc is
remove
detailed
playing.
Recorder Status Icon
station
number,
repeatedly to display/change
displayed on-screen.
DISPLAY
See the
TV
the TV channels, press ENTER
information displayed on-screen.
Indicates channel
Press DISPLAY
Resume
name, and audio signal (STEREO,
MONO) received by the tuner.
Action
play
Displays
from this
prohibited
or
point
not available
PR-06
STEREO
Notes :
ABC
Some discs may not provide all of the features on the
On-Screen Display, examples shown the below.
If
no
button is
Display
2004/01/01
will
pressed
disappear.
for 5
seconds, the On-Screen
13:35
Indicates current date and time.
DVD
Menu
VR
Video
+RW
+R
Function (Use v / V to select desired option)
Options
Shows the current title number and total number of
Title Number
1/6
Chapter
Number
4/26
Time Search
00:10:30
Audio
Language
(DVD only) and Digital
Audio Output Mode
Subtitle
Language
Angle
D
2CH
ABC
OFF
NORM
to the desired title number.
b/B,or
Numbers, ENTER
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
b/B,or
Numbers, ENTER
Shows the elapsed playing time, and
b/B,
Numbers, ENTER
searches the
point by
the
elapsed
time
directly.
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes
1/3
Sound
titles, and skips
Selection Method
the
Shows the current subtitles language, and
changes
the
setting.
Shows the current angle number, total number of
angles, and changes the angle number.
Shows the current sound mode, and
changes
the
b/B
setting.
setting.
b/B
b/B
b/B
VCD
Menu
Function (Use v / V to select desired option)
Options
Track Number
1/6
Time
Audio Channel
Sound
00:10:30
Stereo
NORM
Shows the current track number and total number of tracks
or PBC On mode, and skip to the desired track number.
Shows the elapsed playing time (Display only).
Shows the audio channel, and
changes
the audio channel.
Shows the current sound mode, and
changes
the
setting.
Selection Method
b/B,or
Numbers, ENTER
--
b/B
b/B
29
DVRSETUP
DVD and Video CD
DVD
Video CD
or
Operation
General Features
Playback
Playback Setup
Turn the TV
on
Note :
and select the video
input
source con-
nected to the DVD Recorder.
Audio
the
1
System: Turn the Audio System on and select
input source connected to the DVD Recorder.
Press OPEN/CLOSE
Load
your
2 playback
(Z)
to open the disc
DVD
chosen disc in the tray, with the
3
READING appears
starts
playback
If
start, press N
In
some
on
a
disc has
tray.
the display window, and
If
cases, the disc
might
menu
does not
playback
menu
displayed
may be displayed first after
Video CD that contains a menu.
loading
DVD
a
or
want to
view, then press ENTER
Press TITLE
or
If
title/chapter
playback.
you
to start
MENU/LIST to return to the
menu
display.
VCD
Use the number buttons to select the track you want
to view.
Press RETURN
Menu
setting
menu
menu display.
operating procedures for
depending on the disc.
or
b / B to select
title
Video
on a
1/6
VR
Setup
+R
VCD
disc has
Video
1. Press SCAN
menu.
Rating settings (not authorized),
the
VR
(m
or
+RW
+R
VCD
M) during playback.
The Recorder will enter SEARCH mode.
4-digit
code must
be entered and/or the disc must be authorized
page 25).
DVDs may have a Region Code.
Your recorder will not play discs that have
(see
on
code different from your recorder. The
this Recorder is 4 (four).
3.
region
region code
a
for
(m
M)
to select the
required
(backward)
or MX2, MX4, MX16, MX100 (forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8 (backward) or MX2, MX4, MX8
(forward).
To exit SEARCH mode, press N (PLAY).
or
speed: mX2, mX4, mX16,
If Parental Control is set and the disc is not within the
Still Picture and
DVD
Video
2.
mX100
Frame-by-Frame Playback
VR
1. Press PAUSE/STEP
30
+RW
to another
2. Press SCAN
--
title number.
more than one chapter/track, you
chapter/track as follows:
Press SKIP (. or >) briefly during playback to
select the next chapter/track or to return to the beginning of the current chapter/track.
Press SKIP (.) twice briefly to step back to the
previous chapter/track.
To go directly to any chapter/track during playback,
press DISPLAY. Then, use v / V to select chapter
icon (or for a Video CD, select track icon). Then, enter
the chapter/track number using the numbered buttons
(0-9) or press b / B.
a
DVD
Notes :
"Rating",
a
Search
menu screen.
You may also set PBC to OFF in the
See page 23.
--
v / V to select the title
use
to return to the
and the exact
may differ
Follow the instructions on each
using
the
(O)
to
(0-9)
can move
DVD
Use the bBvVbuttons to select the
can move
Then, press the appropriate numbered button
DVD
A
title, you
follows:
4/26
is
one
+R
CHAPTER/TRACK Selection
appear
Tip
a menu
than
+RW
icon.
instead.
If
more
as
Press DISPLAY then
to close the
automatically.
(PLAY).
use
1/6
VR
Video
another title
(Z)
otherwise, all operations described
TITLE Selection
tray.
side down.
Press OPEN/CLOSE
Unless stated
the Remote Control. Some features may also be available on the Setup menu.
+RW
+R
VCD
(X) on the remote control during playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP (X) repeatedly.
To exit PAUSE mode, press N (PLAY).
DVD and Video CD
General Features
Operation (Continued)
Video CDs
(Continued)
Slow Motion
DVD
VR
Video
+RW
1. Press PAUSE/STEP
+R
(m
PAUSE mode.
M) during
Track/All/Off
Track:
?
All:
?
Off: does not
desired
a
repeat mode.
the current track.
repeats
repeats the all tracks
on
the disc.
play repeatedly.
Note :
(X) during playback.
or
?
VCD
The Recorder will enter PAUSE mode.
2. Press SCAN
Repeat
-
Press REPEAT to select
The DVD Recorder will enter SLOW mode.
On
a
the
Setup
Video CD with
menu
Repeat
A-B
to
must set PBC to OFF in
PBC, you
use
the
Repeat
function. See page
23.
3. Use the SCAN
(m or M) to select the required
speed: t 1/16, t 1/8, t 1/4, or t 1/2 (backward), or T 1/16, T 1/8, T 1/4, or T 1/2 (forward).
With a Video CD, the Slow speed changes: T 1/8,
T 1/4 or T 1/2 (forward).
To exit Slow Motion mode, press N (PLAY).
4.
DVD
To
Repeat
in
playback
is not
reverse
possible
+RW
sequence in
a
+R
VCD
title:
a
1. Press A-B at your chosen
Note :
Slow motion
VR
Video
repeat
A-B
starting point.
icon and 'A-' appears
on
the TV
screen.
2. Press A-B
with
Repeat
Video CDs.
again at your chosen ending point.
icon and 'A-B' appears on the TV screen, and the
repeat sequence begins.
Karaoke DVD
Random
3. To cancel the sequence, press A-B
select Off.
VCD
repeatedly
to
1. Press RANDOM
The unit
during playback.
automatically begins Random Playback
"RANDOM" appears
2. To return to normal
on
the TV
and
screen.
press RANDOM until
the TV screen.
DVD
playback,
"NORMAL" appears
on
Tip
By pressing
Time Search
SKIP >
during Random playback, the
(track) and resumes Random
00:10:30
VR
Video
+RW
+R
The Time Search function allows you to start
at any chosen time on the disc.
1. Press DISPLAY twice
during playback.
unit selects another title
Screen
playback.
The Time Search box shows the
2. Within 10
This function
works with DVD Karaoke discs
only
a
Video CD with
Setup
menu
to
must set PBC to OFF
PBC, you
use
3. Within 10
the Random function. See
the
Repeat
display
the TV
The On-
screen.
elapsed playing
time of the
Video
-
VR
+RW
+R
VCD
Repeat Chapter/Title/Off
a
desired
Chapter: repeats
the current
?
Title:
current title
?
Off: does not
repeats the
v / V to select the Time
required
can
4
Within 3
use
the number buttons to enter
start time. Enter
not enter
an
Display.
appears in the Time Search box.
seconds,
right
hours, minutes, and
in the box.
invalid time.
If you enter the wrong
the correct numbers.
Chapter
Press REPEAT to select
?
use
seconds from left to
You
DVD Discs
seconds,
The "0:00:00"
page 23.
DVD
on
Search icon in the On-Screen
or
Video CDs without PBC.
in the
appears
current disc.
Note :
On
Display
playback
numbers, press CLEAR. Then
seconds, press ENTER
enter
to confirm the start
time.
Playback
starts from the selected time
on
the disc.
repeat mode.
chapter.
.
play repeatedly.
31
PLAYBCK
DVD and Video CD
General Features
Operation (Continued)
Discs: Menus
Zoom
DVD
VR
Video
+RW
+R
DVDs may contain menus that allow you to access
features. To open the disc menu, press
MENU/LIST. Then, press the appropriate number button
VCD
special
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1. Press ZOOM
during playback
still
or
playback
Each press of the ZOOM button
the sequence shown below.
x2 size
→
x4 size
display
in
an
highlight
your selection, then press ENTER.
through
TV
the
screen.
repeatedly
playback, press CLEAR or press
until the normal picture appears.
The Zoom function may not work for
nine
points
To enter
1.
start
a
DVDs.
some
+RW
playback
from
a
2. To
+R
memorized
point. Up
to
Repeat step
menu
remove
the TV
screen
1 to enter up to nine Marker
Clear
1.
disc
a
Camera
again.
Angle
DVD
1/3
Press ANGLE then b / B
points
on a
repeatedly during playback
angle.
The number of the current
angle
appears
on
the TV
screen.
the Audio Soundtrack
menu
seconds,
2CH
press SEARCH.
use
will appear
on
the TV
screen.
DVD
VR
Video
+RW
+R
b / B to select the marker
number that you want to recall or clear.
3. Press ENTER and playback starts from the marked
scene.
displayed.
Marked Scene
playback,
The Marker Search
2. Within 10
is
to select the desired
briefly.
D
During
DVD
the disc menu, press MENU/LIST
Changing
or
angles, spoken lanchapters for the title.
wish.
disc.
To Recall
the
camera
During disc playback, press MARKER when
playback reaches the spot that you want to
on
on
If the disc contains sequences recorded from different
angles, the angle icon appears briefly on the TV
screen. You can then change the camera angle if you
be memorized.
mark, follow these steps.
The Marker icon will appear
will appear
may appear.
VCD
memorize.
2.
menu
menu
1. Press MENU/LIST.
1/9
VR
can
menu, the
menu may contain camera
guage and subtitle options, and
The disc
Marker Search
can
a
2. The
normal
Video
the bBvVbuttons to
Otherwise, the disc
Disc Menu
DVD
use
DVD
Title Menu
If the current title has
move
Note :
You
option. Or,
1. Press TITLE.
picture.
resume
ZOOM
the TV
normal size
→
2. Use the bBvVbuttons to
zoomed
changes
to select
to acti-
vate the Zoom function.
3. To
the Contents of DVD Video
Reviewing
(Continued)
Or, Press CLEAR and the marker number is
Press AUDIO then press b / B repeatedly during playa different audio language (DVD only) or
back to hear
audio soundtrack if available.
erased from the list.
4. You
can play any marker
the marker search menu.
by inputting
its number
on
Note :
Some discs feature both
tracks. There is
no
Dolby Digital and DTS soundanalog audio output when DTS is
selected. To listen to the DTS
Recorder to
a
puts. See page
32
soundtrack,
DTS decoder via
one
of the
17 for connection details.
connect this
digital
out-
DVD and Video CD
Operation (Continued)
Audio Channel Selection
PIP
VCD
Stereo
Press AUDIO then press b / B repeatedly during playa different audio channel (Stereo, Left or
back to hear
Right).
3D Surround
DVD
This unit
can
VR
Video
+RW
+R
VCD
This function enables you to view the stored stations in
the sub picture during playback.
PLAYBCK
NORM
VR
Video
(Picture-in-Picture)
DVD
produce
+RW
a
+R
3D Surround
VCD
effect, which
simulates multi-channel audio
playback from two
speakers, instead of the five or
more speakers normally required to listen to multichannel audio from a Home Theater System.
1. Press 3D SURR. then press b / B repeatedly during
playback to select "3D SUR".
conventional stereo
2. To turn off the 3D Surround
effect, select "NORM".
Turning
PIP On and Off
Press PIP to switch
Subtitles
DVD
Video
again
OFF
ABC
VR
+RW
Input
+R
on
the sub
picture,
press PIP
to switch it off.
selection for sub
picture
input source for the sub picture. Each time AV is pressed, each input source
available for the sub picture is displayed as shown
source
Press AV to select the
Press SUBTITLE then press b / B repeatedly during
playback to see the different subtitle languages.
Instant
DVD
Skip
Video
VR
+RW
Each press INSTANT SKIP
skips
Program
+R
forward 15 seconds.
Note :
If
below.
Tuner→AV1→AV2→DV
appears, the feature is not available
on
the disc.
Use PR
selection for sub
/
picture
the program if sub picture's
input source is Tuner. The selected program number
is displayed on the TV screen. You can display the
selected program by pressing STOP (x).
(v
V)
to
change
Sub
Last Condition
DVD
Video
VR
picture position change
repeatedly until desired position is
achieved. The sub picture moves clockwise or
Memory
+RW
This Recorder memorizes the
user
Press b / B
+R
counterclockwise.
settings
for the last
disc that you have viewed. Settings remain in memory
even if you remove the disc from the Recorder or switch
off the Recorder. If you load a disc that had its settings
memorized, the latest stop position is automatically
recalled.
Notes :
--
--
Settings are stored in memory for use any time.
This Recorder does not memorize settings for a disc
if you switch off the Recorder before
the disc.
commencing
to
play
33
Audio CD and MP3/WMA
Playing
file
Audio CD
an
MP3
CD
The DVD Recorder
recordings
or
Operation
MP3/WMA
WMA
can
DVD-RW, DVD+R
or
on
MP3/WMA
MP3 / WMA disc
play
ited
MP3/WMA formatted
?
CD-ROM, CD-R, CD-RW, DVD-R,
on
Notes
as
?
compatibility
with this
player
is lim-
follows:
Sampling frequency: within 32 48 kHz (MP3),
48kHz (WMA)
Bit rate: within 32 320kbps (MP3),
32
192kbps (WMA)
-
32
DVD+RW discs.
Recordings
within
-
-
-
Audio CD
?
Once you insert an audio CD
screen. Press v / V to select
N
(PLAY)
ENTER and
or
a menu
a
on
appears
track then press
playback
The recorder cannot read
a
TV
?
?
starts.
file extension other than
CD-R
physical
/ ".wma".
format should be ISO 9660
If you record MP3 / WMA files using software that
a file system (eg. Direct-CD) it is
impossible
to
playback
MP3 / WMA files. We
mend that you use Easy-CD
an ISO 9660 file system.
Audio CD
List
".mp3"
cannot create
1/12
1:10:00
MP3/WMA file that has
an
Program
?
TRACK1
TRACK2
File
names
should have
must
incorporate
They
should not
TRACK5
TRACK6
"<>letc.
TRACK3
TRACK4
?
TRACK7
?
TRACK8
a
Creator, which
recom-
creates
maximum of 8 letters and
.mp3 or .wma extension.
contain special letters such as
an
The total number of files
on
/ ?
*
the disc should be less
than 999.
This DVD recorder
MP3 / WMA
1.
Press v / V to select
see
2.
a
folder, and press ENTER
to
the folder contents.
Press v / V to select
or
ENTER.
requires
discs and
Playback
a
track then press N
(PLAY)
starts.
List
be
Music Folder 2
Music Folder 3
Music Folder 4
Music Folder 5
Music Folder 6
Music Folder 7
Music Folder 8
Tips
in
file list and want to return to the
a
and press
highlight
previous menu screen.
Pressandholdv/Vtogotothenext/previous
list,
use
the v/V to
ENTER to return to the
page.
On CDs
(or DVDs) with mixed content (MP3/WMA
files), you can select between the
files and JPEG
MP3/WMA
menu
MP3/WMA
or
highlighted.
and JPEG
JPEG word
RETURN
AUDIO CD
34
on
Press TITLE and
menu.
top
on
the
menu
Use b/B to select MP3/WMA
then press ENTER.
You can view TV channel
pressing
or
is
required
from the Internet. Our company has no right to
grant such permission. Permission should always
Program
Music Folder 1
are
permission
in order to download MP3 / WMA files and music
MP3/WMA
Folder
to
optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R
containing MP3 or WMA files) and these require compatible playback.
Customers should note that
00:00:00
If you
recordings
meet certain technical standards in order to achieve
or
video
input
or
is
JPEG
source
by
If you want to return to the
MP3/WMA menu, press MENU/LIST.
(O).
sought
from the
copyright
owner.
:
Audio CD and MP3/WMA
Pause
MP3
CD
1. Press PAUSE/STEP
Operation (Continued)
Search
WMA
1. Press SCAN
(X) during playback.
2. To return to
N
playback, press
PAUSE/STEP (X) again.
Track Selection
(PLAY)
or
>
MP3
press
WMA
briefly
or
an
Audio
track number
ing playback
CD,
to go
to return to the
step
to any
track,
enter the
(0-9)
dur-
Repeat
To
repeat
Repeat
MP3
?
TRACK:
?
ALL
?
OFF
desired
(No display):
Random
does not
MP3
CD
A-B
a
MP3
CD
sequence in
a
WMA
track:
icon and 'A' appears
starting point.
on
the
menu screen.
on
repeat sequence begins.
3. To exit the sequence and return to normal
A-B again.
repeat mode.
the current track.
repeats
repeats the all tracks
:
menu
-
and the
a
the
again at your chosen ending point.
The Repeat icon and 'A B' appears on the menu screen,
WMA
Press REPEAT to select
on
2. Press A-B
Repeat Track/All/Off
CD
indicated
mode, press N (PLAY).
1. Press A-B at your chosen
the Track List.
on
are
back to the pre-
the numbered buttons
using
and direction
3. To exit SEARCH
to
directly
speed
display.
vious track.
On
M) during playback.
(m or M) to select the required
speed: mX2, mX4, mX8 (backward) or MX2,
MX4, MX8 (forward).
briefly during
playback to go to the next track
beginning of the current track.
Press SKIP . twice
or
2. Press SCAN
CD
or
(m
The Recorder will enter SEARCH mode.
Search
Press SKIP .
CD
The
the disc.
Repeat
icon
disappears
from the
play,
press
menu screen.
play repeatedly.
WMA
1. Press RANDOM
during playback or in Stop mode.
automatically begins Random Playback and
"Random" appears on the menu display.
The unit
2. To return to normal
repeatedly
display.
playback, press RANDOM
disappears from the
until "Random"
menu
Tip
during
Random
playback,
the
unit selects another track and
resumes
Random
play-
By pressing
SKIP >
back.
3D Surround
This unit
can
MP3
CD
produce
WMA
3D Surround
late multi-channel audio
playback
effects, that simu-
from two conventional
speakers, instead of the five or more speakers
normally required to listen to multi-channel audio from
Home Theater System.
stereo
1. Press 3D SURR.
during playback
a
to select "3D SUR".
2. To turn the 3D Surround effect
until "3D SUR"
disappears
off, press 3D SURR.
from the menu display.
35
PLAYBCK
Audio CD and MP3/WMA
Operation (Continued)
Repeat Programmed
Programmed Playback
The program function enables you to store your favorite
tracks from any disc in the player memory. A program
can contain 99 tracks (Audio CD) or 256 tracks
(MP3/WMA).
1.
Insert
a
You
1.
disc.
Audio CD and MP3/WMA Discs:
or
MP3/WMA
2.
Select
3.
Press PROGRAM.
a
track
You
can
""
4.
additional tracks
on
the list.
add all tracks in the disc. Select
1:10:00
List
Track8
TRACK2
Track3
1-Music1
TRACK3
Track12
2-Music2
3-Music5
TRACK4
Track7
3-Music3
4-Music9
TRACK5
Track6
4-Music4
TRACK6
Track9
5-Music5
6-Music7
TRACK7
Track10
6-Music6
7-Music6
TRACK8
Track1
7-Music7
8-Music3
1-Music8
Audio CD Menu
2-Music16
ENTER to start.
Playback
in the order in which you programmed the
tracks. Playback stops after all of the tracks on the
begins
Program
36
list have
played
a
disc. The
repeat icon
ALL:
?
Off(No display):
a
desired
repeat mode.
repeats the current track
repeats all the tracks on programmed list.
does not
play repeatedly.
once.
(>)
once
during Repeat
Track
Erasing
a
Track from
Program
play-
List
Use vVbBto select the track that you wish to
from the Program list.
2.
Press CLEAR.
ENTER to
to
Repeat
the
Or, select
erase
"
erase
icon then press
on the Program
additional tracks
Complete Program
"
"
the selected track
on
the list.
List
Select
", then press ENTER. The
for the disc is erased.
complete Program
5-Music1
MP3/WMA Menu
or
TRACK:
?
Program
TRACK1
(PLAY)
?
Erasing
00:00:00
MP3/WMA
Press N
Press REPEAT to select
list.
Program
playing
erase
page.
1/12
List
disc.
back, the repeat playback cancels.
1.
Select the track you want to start playing on the
Program list. Press and hold v / V to move to the
Audio CD
5.
"
icon then press
the selected track on the Program
previous
Press REPEAT when
If you press SKIP
"
icon then press ENTER.
next /
on a
Note :
Or, select
place
Repeat to place
track/all
a
appears.
the List.
on
ENTER to
list.
menu
play
appears.
2.
Audio CD
can
Tracks
Note:
The programs
removed.
are
also cleared when the disc is
JPEG File
Viewing
Operation
JPEG Disc
a
Slide Show
this DVD Recorder you can view Kodak PICCD-R/RW, DVD+R/RW or DVD-R/RW
Using
TURE CDs and
JPEG
Use v V b B to
JPEG
highlight
the
(Slide Show)
on
the
then press ENTER.
menu
with JPEG files.
1.
Insert
disc and close the
a
appears
the TV
on
tray. The JPEG
Still Picture
menu
screen.
1.
JPEG
Press PAUSE/STEP
The recorder will
2.
JPEG
List
Preview
during
now
To return to the slide
show, press N (PLAY)
press PAUSE/STEP
again.
JPEG Folder 1
PLAYBCK
slide show.
go into PAUSE mode.
or
JPEG Folder 2
II
JPEG Folder 3
to another File
Moving
JPEG Folder 4
JPEG
JPEG Folder 5
JPEG Folder 6
JPEG Folder 7
JPEG Folder 8
Folder
:
Press SKIP
cursor
viewing
to the next
a
(. or >) or
picture to advance
Press v / V to select
folder, then press ENTER. A
list of files in the folder appears. If you are in a file
a
list and want to return to the
the v / V buttons
on
If you want to view
previous Folder list,
highlight
Press v / V
picture
during showing
ture clockwise
or
JPEG disc
limited
There
are
four Slide
(Normal),
>
Speed options (
(Slow) and II (Off).
Use v V b B to
?
compatibility
Depending
could take
with this recorder is
upon the size and number of JPEG files, it
long time for the DVD Recorder to read
a
the disc's contents. If you don't see an on-screen display after several minutes, some of the files may be
too
highlight
the
b / B to select the
use
)
(Fast),
: >>>
?
large
---
reduce the resolution of the JPEG files to
pixels
as
2760
x
2048
pixels
and burn
If you
list,
are
use
in
a
Speed options (
option you want
).
to
?
use
file list and want to return to the Folder
the v/V to
return to the
?
highlight
previous menu screen.
?
?
On CDs
(or DVDs) with mixed content (MP3/WMA
and JPEG files), you can select between the
menu
MP3/WMA
or
highlighted.
and JPEG
JPEG word
on
a
If the files have
File
are
them
names
be read
by
shown
into the CD
copying
".jpg"
exten-
layout.
".jpe" or ".jpeg" extensions, please
".jpg" file.
as
without
".jpg"
extension will not be able to
this DVD Recorder. Even
as
different
JPEG
image
though
files in Windows
the files
Explorer.
Press TITLE and
menu.
top
the disc
Ensure that all the selected files have the
rename
Pressandholdv/Vtogotothenext/previous
MP3/WMA
on
Some discs may be incompatible due to
recording format or the condition of disc.
sions when
and press ENTER to
page.
files
The total number of files and folders
should be less than 999.
then press ENTER.
?
pic-
another disc.
Then,
?
to rotate the
a
a
Tip:
?
picture
a
counter clockwise.
follows:
as
less than 5M
>>
JPEG
use
particular file, press
highlight file then press ENTER or
N (PLAY). Slide Show starts from the selected file
if Speed option is not II (Off).
While viewing a file, you can press STOP to move to
the previous menu (JPEG menu).
v / V to
?
B) once while
previous file.
or
the remote to
then press ENTER.
3.
or
JPEG Folder 01/
To rotate
2.
(b
on
the
menu
Use b/B to select MP3/WMA
or
is
JPEG
then press ENTER.
?You
can
view TV channel
RETURN
or
video
input
source
by
If you want to return to the
JPEG menu, press MENU/LIST.
pressing
(O).
37
Basic
Basic
Recording
from TV channels
Recording
Follow the instructions below to record
starts
disc is full
or
Switch
1
TV program.
until the
a
Instant Timer
immediately and continues
you stop the recording.
Recording
on
the recorder and load
Also make
a
easily
recordable disc.
input source is set to
completely blank disc,
this recorder. If you load a
the recorder takes a short while to initialize the disc.
2
3
Set
recording mode as necessary by pressing
repeatedly. (HQ, SQ, LQ, EQ)
HQ; High Quality, SQ; Standard Quality,
LQ: Low Quality, EQ: Extended Quality
/
Changing
can
pressing
AUDIO
during viewing
channel is displayed
or mono
Bilingual
as
shown left
(Basic Recording
channels).
time
→
Left
40M Rec
Main
→
Right
→
→
Sub
Instant Timer
(z)
(Left
or
Checking
remaining
once.
the disc is full.
To record for
a
Recording
Press STOP
(x)
To Pause the
on
to
length
right.
of
time,
see
Instant
to check the
time will be
during
recording
(z).
time
on
the TV
Recording
can
time. The
screen
for
a
be extended
Time
anytime by
press-
REC
ing
If the Recorder is
unplugged (or
recording,
while the Recorder is
recording.
recording,
displayed
recording
Caution
to pause the disc
2. When you want to continue
PAUSE/STEP (X).
Time
Recording
once
Each additional press increases the recording time by
10 minutes within the available free space (maximum
120 minutes).
stop recording.
(X)
the
(z)
To Extend the
Recording
1. Press PAUSE/STEP
Menu
moment.
The
fixed
Recording
Stereo, you
Recording will start. (The REC indicator lights in the
display window.)
Recording continues until you press STOP (x) or
Timer
0:39:59
by
Press REC
Press REC
38
steps 1-4
TV
a
cur-
Right).
5
Follow
on-screen.
broadcast: Stereo
broadcast: Main+Sub
to listen
(language)
TV program. The
If the sound is of poor quality when set to
can often improve it by changing to Mono
4
recording
TV Audio Channel
select the audio channel
rent audio
Stereo
a
(z) repeatedly to select the recordlength.
Recording starts after the first press. Each
additional press increases the recording time by
10 minutes within the available free space (maximum 120 minutes).
The recording time is displayed on the TV screen.
At the end of the recording, the DVD Recorder will
stop recording and shut off.
buttons to select the TV channel
V)
allows you to make
Press REC
a
(v
Recording
preset length without using the program
a
from
2 ing
to record.
You
?
1
REC MODE
Use PR
of
Recording
timer.
that the TV's
sure
Instant Timer
press
lost.
there is
the
a
power failure)
will be
recording
Timer
Recording
This DVD Recorder
be
can
programmed
to record up to
7 programs over a period of 1 month. For unattended
recording, the timer needs to be set with the channels to
be
1
recorded,
the
time and
starting
Press ENTER, the program will be memorized
the DVD Recorder.
3 by
To check the
length.
Press TIMER REC.
The Timer Record
indicates that the timer
menu
will appear.
Timer Record
?
Start Time
End Time
Mode
Repeat
4
2/3 Sun
19:20
19:50
SQ
Once
Choose
Date
?
Start Time
?
End Time
?
Mode
--
--
--
--
a
Close
date up to 1 month in advance.
Set the
Set the
Choose
AT).
(Auto) mode
a
recording starting
recording ending
record mode
sary, to
complete recording
Repeat
(Monday
Choose
--
-
a
Friday),
Enter the
?
?
programmed
Press RETURN
(O)
to exit the
Program
List.
time.
time.
(HQ, SQ, LQ,
Notes :
?
The timer indicator
the
Recorder is in
lights in
standby with
the timer active.
display
window if the
?You must press POWER to
?
stop the timer recording.
timer recording finishes to
confirm the recorded program. If two timer recordings are
set to record sequentially (one right after the other), the
very beginning of the later program may not be recorded.
There is
a
short
delay
when
a
determines how much disc time
b / B
desired
or
necessary
2 recording(s).
?
is
recordable disc is inserted.
or
is available and switches record
?
a
the Timer Record List
recording
Make sure that you load a recordable disc and
POWER to switch your unit to Standby.
a
Choose
?
EQ,
Timer Record List
and
on
the Timer Record List
5 press
memorized program number, or
of the external inputs from which to record.
--
one
TIMER REC
4
119Min Free
Date
PR
AT
SQ
correctly
PR
OK
programming,
will appear.
Check field's "Rec. OK"
mode, if
neces-
the program.
repeat (Once, Daily
Weekly).
information for your timer
(left/right) moves the cursor left/right
v / V (up/down)
changes the setting at the current cursor position
Press RETURN (O) to exit the Timer Record
--
--
menu.
?
Press ENTER after
filling
in all the program infor-
mation.
?
Press TIMER REC to
display
Timer Record List.
39
RECODING
Timer
Recording (Continued)
Timer
Reviewing
Programming
Details
Recording
be checked whenever the DVD
can
Recorder is turned
Press TIMER REC twice.
on.
?
Use v / V to select
?
Press ENTER to edit the selected program.
Timer Record menu appears.
?
Press CLEAR to
timer
a
remove
recording.
the selected program
from the Timer Record List.
Timer Record List
PR
Date
Start Time
Length
Mode
Check
10:20
60
LQ
Rec. OK
51
25/7 (Su)
1:20
50
HQ
Rec. OK
5
17/7
(Sa)
Edit
Canceling
You
can
clear
TIMER REC
Timer
timer
Timer Record
Close
Recording
setting anytime
before the record-
starts.
ing actually
?
a
a
Delete
CLEAR
Use v / V to select a program you want to remove
the Timer Recorder List. If you want to remove the
program, press CLEAR.
The confirm message will appear.
"Yes" then press ENTER.
Timer
Stopping
a
After
recording
a
timer
use
Recording
has
b/B to select
in
started, you
on
Progress
can
still cancel
the program.
Press POWER.
?
Timer
Even
Recording Troubleshooting
though
the timer is set, the Recorder will not
record when:
?
There is
no
disc loaded.
?Anon-recordable disc is loaded.
?
Disc Protect is set to ON in the
?
?
page 27).
Power is turned
Setup
menu
(see
There
are
on.
already
49 titles
DVD+R),
99 titles (DVD-RW, DVD-R,
(DVD+RW) recorded on the
You cannot enter program for a timer
?Arecording is already underway.
?
The time
?
There
If two
?
?
disc.
recording
if:
you're trying to set has already passed.
already 7 timer programs set.
are
or more
timer programs
overlap:
The earlier program takes priority.
After the earlier program finishes, the later program
starts.
?
If two programs
are
set to start at
exactly
the
same
time, the program entered first takes priority.
If the disc is damaged, the recording may not be
pleted successfully. In this case even though the
field shows "Rec.
40
OK", it may
not be.
com-
Check
from
Recording
can
record from
camcorder
external
or
External
from External
Recording
You
an
an
external A/V
VCR, connected
Input
Source
Components
Recording
device, such
You
as a
to any of the Recorder's
inputs.
can
from
record from
the DV IN
port
a
a
Digital Camcorder
digital camcorder connected
panel of this Recorder.
the Recorder's remote, you
Using
to
the front
on
can
control both the
Camcorder and this Recorder.
1
Make sure that the
want to
component you
record from is connected
properly
Before
to the DVD
DV IN
make
recording,
port
is set up
sure
(see
that the audio
page
input
for the
26).
Recorder. See page 18.
2
Press AV
repeatedly
to select the external
input
Tips
to record from.
?
The
?T uner: Built-in tuner
?
Some camcorders cannot be controlled
?
If you connect
?AV1: AUDIO IN 1 / VIDEO IN 1 mounted
?AV2: INPUT 2
(VIDEO, AUDIO (L/R),
mounted on front panel
?D V: DV IN mounted on front panel
Load
a
on
back
S-VIDEO
panel
IN)
second DVD Recorder
a
using
a
DV
cannot control the second DVD from this
?You can't control this unit
connected to the DV IN
recording
REC MODE
mode
as
necessary
remotely
from
a
port.
Press REC
Quality
(z)
once.
will start.
(The
REC indicator
lights
in the
(x)
the
1
2
Make sure your
to the front
Check that the DV audio
You
?
continues until you press STOP
or
Recording
can
DV
the
a
on
Press STOP
fixed
length
of
time,
see
Instant Timer
page 38.
(x)
to
stop recording.
input
choose between Audio 1
is
as
you
(original audio)
require.
and
(over-dubbed audio).
Input is set from the DV Rec Audio in sub-menu
Setup menu. See DV Rec Audio on page 26 for
more
disc is full.
To record for
Digital Camcorder is connected
panel DV IN port. See page 18.
Audio 2
display window.)
Recording
DV
a
repeatedly.
HQ; High Quality, SQ; Standard Quality, LQ: Low Quality,
EQ: Extended
one.
component
cassette.
by
(HQ, SQ, LQ, EQ)
6
this
?You can't record date and time information from
the
5 Recording
using
Recorder's remote.
cable, you
recordable disc.
3
Select
4 pressing
must be DVC-SD format.
signal
source
3
4
information.
Press AV
repeatedly
DV appears in the
Find the
If your source is copy-protected using CopyGuard, you will not
be able to record it using this Recorder. See Copyright on page
9 for more details.
place on the
recording
want to the
?
to select the DV
display
For best results, pause
you want to record.
Note :
of
window and
on
input.
the TV
screen.
Camcorder tape that you
to start from.
playback
at the
point
from which
on your Camcorder, you can use this
Recorder's remote to control the Camcorder using the
Depending
STOP, PLAY and PAUSE functions.
5
Press REC
(z)
once
to start
recording.
automatically stopped if the
no signal.
?You can pause or stop the recording by pressing
PAUSE/STEP (X) or STOP (x). You cannot
?
Recording
is
Recorder detects
control the Camcorder from this Remote Control
during recording.
?
In Video
mode, the final frame of the recording
may remain
?
displayed on screen for a while after
recording stops.
For timer recording to work properly on this
Recorder, the Digital Camcorder must also be
switched on and be operating.
41
RECODING
Recording
from
External
an
Input
Source
(Continued)
What is DV?
DV-Related
Using DV, also known as i.LINK, you can connect a
DV-equipped Camcorder to this Recorder using a single
DV cable for input and output of audio, video, data and
control signals.
You may see the following messages appear
TV screen when using the DV IN port.
The i.LINK interface is also known
"i.LINK" and the "i.LINK"
?
as
IEEE 1394-1995.
trademarks.
logo
only compatible with DV-format
(DVC-SD) camcorders. Digital Satellite Tuners,
PCs, and D-VHS Video Recorders are not compatiare
?You cannot connect
a
more
than
one
DVD
equip-
two
port (including
Recorders).
It may not be possible to always control the connected Camcorder via the DV IN port.
Digital
Camcorders
stereo
16-bit/48kHz,
can
or
usually
record audio
can
only
record
audio track. Set DV Rec Audio to Audio 1
one
or
or
the
source
component,
or
just
one
supports connection
to
Camcorder.
if the power fails in the
the DV cable becomes discon-
tape,
There is
no
cassette loaded into the connected
equip-
ment.
Uncontrollable device
This Recorder cannot control the Camcorder.
Information
Camcorder is
updating
information for DV.
Audio 2
required (see page 26).
Audio input to the DV IN port should be 32 or 48kHz
(not 44.1kHz).
Picture disturbance on the recording may occur if the
source component pauses playback or plays an
unrecorded section of
Too many devices connected
The DV IN port on this Recorder
Updating
stereo
as
or
Although DV Rec Audio is set to Audio 2 and Audio
signal is not present, DV Rec Audio will be reset to
Audio 1 automatically.
Camera mode
Camcorder is set to
2
camera
mode.
Troubleshooting
If you can't get a picture and/or audio through the DV IN
port, check the bullet points:
sure the DV cable is properly connected.
switching off the connected equipment then
switching back on.
?T ry switching the audio input.
?
nected.
?
properly,
Camcorder is switched off.
as
twin stereo tracks of 12-
bit/32kHz. This Recorder
?
Not connected to Camcorder
The Camcorder is not connected
Check the tape
ment connected via the DV IN
?
your
DV camcorder at
time to this Recorder.
?You cannot control this Recorder from external
?
on
This Recorder is
ble.
?
Messages
Make
?T ry
Note :
Depending
on
the connected
be able to control it
with this Recorder.
42
using
Camcorder, you may not
the Remote Control supplied
Title List and
the Title
Using
List Menu
Chapter
List-Original
VR
menu
The Title
List-Original is where you build and edit your
Playlist, and where you can delete titles and make other
changes to the Original content of the disc. You can
also play individual titles directly from the Title ListOriginal menu.
The Recorder must be in Stop mode in order to edit
using the Title List-Original.
1
Press MENU/LIST to
Original
?
the Title List-
display
next page if there
?To exit the Title
RETURN
display
are more
the
1
2
Chapter List-Original
Press MENU/LIST to
List-Original
Use vVbBto choose the title you want to
Chapter List-Original menu then press
ENTER.
view the
the
List-Original options
the left side of
on
appears
menu.
3 Original options
previous/
Title
display
VR
menu
menu.
Title
from Title List-
'Chapter'
then press ENTER.
Chapter List-Original
than 6 titles.
List-Original
the
Use v / V to select
menu.
Use the v / V buttons to
Using
menu
appears
the TV
on
screen.
menu, press
(O).
Chapter List
Title 1
06/27
Original
Sun
0:30:16
1/9
1/12
Title List
Original
DVD-VR
TITLE 1
EQ
1:54:55
12/7
TITLE 2
0:16:00
12/9
TITLE 3
0:35:00
12/10
0:30:00
Free
Select
TITLE 4
12/13
TITLE 5
0:08:00
Select
DISPLAY
Info
LIST
Close
Playlist
TITLE 6
0:10:00
12/16
LIST
0:15:00
12/19
To view
Chapter List-Original options,
4 chapter you
then press
Close
Playlist
2
To view Title
the
3
List-Original options,
menu.
Use v / V to select
an
option
then press ENTER
to confirm.
Play:
Play
Starts
playback
for the
Moves to
Chapter:
Chapter
List-Original menu of the title.
(refer to right on this page)
Delete
Edit
Delete: Deletes the title.
Playlist
Title Name
?T itle Name: Edits the title
Edit: Selects Edit
Delete Part
?
a
(O) repeatedly
an
option
Play:
Play
then press ENTER
Starts
selected
Title
playback
chapter.
of the
Title: Moves to Title List-
Original
(refer to
Edit
menu
left
of the
on
this
chapter.
page)
Delete: Deletes the
Playlist
(page 50)
Combine
?
Edit: Selects Edit
chapter.
options.
Combine: Combines two
chapters
into
one.
(page 51)
Adds the
Playlist:
chapter
Playlist. (page 49)
to the
part
(page 50)
Playlist: Adds the
Playlist. (page 49)
Press RETURN
Use v / V to select
options.
Delete Parts: Deletes
the left
to confirm.
(page 51)
of the Title.
4 List-Original
5
on
appears
menu.
(page
50)
name.
side of the
Delete
selected title.
Chapter
Chapter List-Original options
select the
title you want then press ENTER.
Title List-Original options appears on the left side of
select the
ENTER.
want
title to the
Press RETURN
6 List-Original
(O) repeatedly
to exit
Chapter
menu.
to exit the Title
menu.
Tip
Press DISPLAY to show
more
detailed title information
for selected title.
43
EDITNG
Title List and
Using
1
the Title
repeatedly
the Title
To exit the Title
the
Using
Press MENU/LIST
the Title
to
repeatedly
display
1 List-Playlist
Use vVbBto choose the title you
2
then press
Chapter List-Playlist
display
List-Playlist,
the
previous/
than 6 titles.
are more
want to
view
press RETURN
the
1/12
Title List
Playlist
menu
ENTER.
(O).
Title
List-Playlist options
TITLE 2
0:16:00
3 Playlist options
TITLE 3
0:35:00
12/9
0:30:00
12/10
appears
the left side of
on
menu.
Use v / V to select
TITLE 1
12/7
VR
Menu
Chapter List-Playlist
menu.
next page if there
?
display
menu.
Use the v / V buttons to
?
to
(Continued)
VR
Menu
List-Playlist
Press MENU/LIST
List-Playlist
List Menu
Chapter
from Title List-
'Chapter'
then press ENTER.
Chapter List-Playlist
menu
appears
on
the TV
screen.
TITLE 4
12/13
TITLE 5
0:08:00
12/16
Select
LIST
TITLE 6
0:10:00
12/19
0:15:00
Chapter List
Close
Original
Title 1
6/27
Playlist
Sun
0:25:45
1/9
2
3
To view Title
select the title
List-Playlist options,
you want then press ENTER.
Title List-Playlist options appears
the menu.
Use v / V to select
an
option
the left side of
on
then press ENTER
Select
LIST
Close
Original
to confirm.
To view
Play:
Starts
playback
selected title.
Chapter
Chapter: Moves to Chapter
List-Playlist menu of the title.
(refer to right on this page)
Edit
Chapter List-Playlist options
List-Playlist
menu.
(page
50)
5
Title Name
options.
?T itle Name: Edits the title
name.
Delete Part
?
(page 51)
Delete Part: Deletes
the Title.
Press RETURN
Use v / V to select
menu
left
on
List-Playlist
chapter. (refer to
page)
of the
this
Edit: Selects Edit
detailed title information
Press RETURN
6 List-Playlist
into
one.
Move: Moves
(page 51)
chapter of
Chapter List-Playlist menu to
position on the menu. (page
52)
(O) repeatedly
menu.
options.
Combine: Combines two
chapters
?
for selected title.
44
of the
chapter from
Chapter List-Playlist menu.
(page 50)
Combine
more
playback
chapter.
Delete: Deletes the
Move
display
Starts
the
?
Press DISPLAY to
then press ENTER
Title: Moves to Title
Delete
to exit Title List-
Tip
option
selected
part of
menu.
an
Play:
Play
(page 50)
(O) repeatedly
the left
on
to confirm.
Edit
a
appears
menu.
Title
Edit: Selects Edit
4 Playlist
side of the
Delete: Deletes the title from the
Title
ENTER.
want
Play
Delete
select the
Chapter List-Playlist options,
4 chapter you
then press
the
a
to exit
Chapter
a
Title List and
the Title List
Using
From the Title List
List Menu
Chapter
display
Video
menu
can
you
(Continued)
Deleting
name, and
play,
delete titles.
After
a
Video mode disc is
finalized, the Title List
and all you
Press MENU/LIST to
display
can
finalized, you
can
delete titles recorded
screen
do is select
Caution
?
If you delete a title from
disappear from the Title
?
When
the Title List.
ing
1/12
Title List
disc is
a
Video
the disc.
on
changes its appearance
titles to play.
1
Before
Title
a
DVD-R disc, the title will
List, but the available record-
a
time will not increase.
deleting a title from a DVD-RW disc, the
remaining time available for recording will only
increase if it is the last title
on
the disc.
DVD-RW
Title 1
HQ
1:05:43
12/7
Title 2
0:16:00
Title
12/9
0:35:00
3
12/10
1
0:30:00
Free
Title 4
12/13
Title
0:08:00
Select
5
DISPLAY
2
Title 6
12/16
0:10:00
12/19
Info
0:15:00
Close
Press MENU/LIST to
2
Title List
List
3
options
display.
title then press ENTER.
appears on the left side of the Title
a
menu.
Use v / V to select 'Delete' then press ENTER to
confirm.
The confirm message for
Use v / V to select
an
option
then press ENTER
Play:
Starts
playback
Delete
Delete: Deletes the title from the
Edit
Title List.
Edit
Edit: Selects Edit
options.
?T itle Name: Edits the title
Title Name
name.
Press RETURN
to exit Title List.
Tip
Press DISPLAY to
display
more
4
detailed title information
Use b / B to select 'Yes' then press ENTER.
chapter or title is deleted.
The selected
After
pressing ENTER,
displayed.
(page 51)
(O) repeatedly
will appear.
Delete
of the
selected title.
deleting
Play
to confirm.
Play
4
3
Title List
Use vVbBto choose a title you want to
delete then press ENTER.
Title List options appears on the left side of the Title
List
Use v / V to choose
display
Repeat steps
5 the Title List.
6
updated
menu
is
2-3 to delete additional titles from
Press RETURN
Title List
the new,
(O) repeatedly
display.
to remove the
for selected title.
45
EDITNG
Title List and
Using
List Menu
Chapter
the Title List
Tip
+RW
menu
(Continued)
Press DISPLAY to
The Title List is where you can see the all recorded
titles, and where you can delete titles and make other
changes to the Original content of the disc. You
also play titles directly from the Title List menu.
The Recorder must be in Stop mode in order to
using the Title List menu.
1
?
display
Use the v / V buttons to
the
If you press REC (z) after the Title List menu
appears, the selected title is erased then overwrite
previous/
(O).
1
2
1/12
12/7
Title 2
0:16:00
0:35:00
12/10
12/13
Select
0:08:00
DISPLAY
0:10:00
12/16
12/19
REC
options
2
options,
display
on
appears
Title List
menu.
the left side of the
0:15:00
Chapter
Close
'Chapter'
from Title List
then press ENTER.
List menu appears on the TV
Capter List
To view Title List
+RW
menu
Use vVbBto choose the title you want to
Chapter List menu then press ENTER.
3 options
Title 6
Info
List
Chapter
Use v / V to select
Title 5
details.)
menu.
0:30:00
Free
Title 4
more
view
Title 3
12/9
page 54 for
(See
Press MENU/LIST to
Title List
Title 1
1:07:16
the
Using
DVD+RW
HQ
starts.
menu.
next page if there are more than 6 titles.
?To exit the Title List menu, press RETURN
Title List
Original
detailed title information
Caution
edit
the Title List
display
more
can
recording
Press MENU/LIST to
display
for selected title.
select the title you
screen.
Title 1
06/16
Original
Wed
0:30:56
1/9
want then press ENTER.
Title List options appears on the left side of the
menu.
3
Use v / V to select
an
option
then press ENTER
to confirm.
Select
Play:
Play
Full
Starts
playback
selected title
Play
Chapter
Delete
Protect
chapters.
Full
Play:
hidden
Starts
Moves to
of the title.
this
on
Chapter List
(refer to right
page)
Delete: Deletes the title.
Title Name
Divide
To view
4 you
Chapter
against accirecording, editing, or
deleting of the title. (page 52)
5
Use v / V to select
?T itle Name: Edits the title
name.
?
two titles.
4
Press RETURN
menu.
46
one
option
chapter
then press ENTER
Starts
selected
Title
playback
chapter.
of the
Title: Moves to Title List
of the
this
chapter. (refer
page)
Edit: Selects Edit
?
Combine
Hide
?
(page 51)
Divide: Divides
an
Play:
Play
Protect: Protects
options.
select the
to confirm.
dental
Edit: Selects Edit
options,
menu.
Edit
(page 50)
List
want then press ENTER.
Chapter List options appears on the left side of the
playback of
including the
chapters.
Chapter:
menu
Edit
except the hidden
the selected title
Close
of the
title into
menu
to left
on
options.
Combine: Combines two
chapters into one. (page 51)
Hide (Show): Hides (or
Shows) the selected chapter.
(page 53)
(page 53)
(O) repeatedly
to exit Title List
6
Press RETURN
List
menu.
(O) repeatedly
to exit
Chapter
Title List and
Using
List Menu
Chapter
the Title List
(Continued)
+R
menu
Using
The Title List is where you can see the all recorded
titles, and where you can delete titles and make other
changes to the Original content of the disc. You
also play titles directly from the Title List menu.
The Recorder must be in Stop mode in order to
using the Title List menu.
Press MENU/LIST to
1
?
Use the v / V buttons to
next page if there
display
are more
the
Chapter
Press MENU/LIST to
1
List
+R
menu
Title List
display
menu.
can
edit
the Title List
display
the
2
Use vVbBto choose the title you want to
Chapter List menu then press ENTER.
view the
Title List
options
on
appear
the left side of the
menu.
menu.
Use v / V to select
3 options
previous/
Chapter
'Chapter'
from the Title List
then press ENTER.
List menu appears on the TV
screen.
than 6 titles.
?To exit the Title List menu, press RETURN
(O).
Capter List
Title 1
06/16
Original
Wed
0:30:56
1/6
Title List
Original
1/9
DVD+R
Title 1
HQ
0:50:36
Title 2
12/7
0:16:00
Title 3
12/9
0:35:00
12/10
0:30:00
Free
Title 4
Title 5
12/13
0:08:00
Select
2
To view Title List
0:10:00
DISPLAY
-/-
-
-
To view
Close
select the title you
menu.
Use v / V to select
an
option
then press ENTER
to confirm.
Play:
Play
Full
Starts
playback
selected title
Play
of the
except the hidden
chapters.
Full
Chapter
4 you
Starts
the selected title
Delete
hidden
Protect
menu
on
playback of
including the
chapters.
of the title.
this
Chapter List
(refer to right
5
Use v / V to select
against accidental recording, editing, or
deleting of the title. (page 52)
Edit: Selects Edit
an
Play:
Title
chapter
then press ENTER
menu
Combine
playback
chapter.
?
Press RETURN
on
of the
of the
this
chapter. (refer
page)
Edit: Selects Edit
Hide
List
Starts
Title: Moves to the Title List
left
6
option
selected
page)
Protect: Protects
select the
to confirm.
Play
(page 50)
Divide
options,
menu.
Delete: Deletes the title.
Title Name
List
?
Moves to
Chapter:
Edit
Chapter
want then press ENTER.
Chapter List options appear on the left side of the
Edit
Play:
Close
0:38:00
Info
options,
Select
Title
want then press ENTER.
Title List options appears on the left side of the Title
List
3
Empty
12/16
to
options.
Combine: Combines two
chapters into one. (page 51)
Hide (Show): Hides (or
Shows) the selected chapter.
(page 53)
(O) repeatedly
to exit
Chapter
menu.
options.
?T itle Name: Edits the title
name.
?
(page 51)
Divide: Not available
(DVD+RW
4
Press RETURN
disc
(O) repeatedly
only)
to exit Title List
menu.
Tip
Press DISPLAY to
display
more
detailed title information
for selected title.
47
EDITNG
Title and
Chapter Editing
Edits you make to the Original content change the actual content of the disc. For example, if you delete a title
chapter
or
that title
from the
Original
content
(Title
is deleted from the
Chapter),
disc, freeing up
or
chapter
recording time.
When you edit the Playlist, on the other hand, you are
not changing the content of the disc. For example,
when you delete a title from the Playlist, you are just
telling the Recorder not to play that title; nothing is actually deleted from the disc.
or
extra
Titles in the disc's
original
content contain
one or more
chapters. When you insert a title into the Playlist, all the
chapters within that title also appear. In other words,
chapters in the Playlist behave exactly as chapters on a
DVD-Video disc do. Parts
sections of
Original
Playlist titles. From the Original and Playlist menu, you
can add or delete parts. Adding a chapter or title to the
Playlist creates a new title made up of a section (ie.,
chapter) of an Original title. Deleting a part removes
part of a title from the Original or Playlist menu.
are
or
When
editing using
tions, the
?
You
+RW
put
Original
title
Once the
Search
the
Delete, Add,
or
Move func-
start and end frames may not be
exactly as
set in the starting and ending points display.
During Playlist playback, you may notice a momentary pause between edits. This is
not
a
Chapter
+R
chapter marker anywhere in a Playlist or
during playback.
chapter is marked, you can use the Chapter
can
a
feature,
as
well
as
delete, combine and
chapters in the Chapter List-Original
Playlist menu.
or
Chapter
move
List-
Chapter markers are inserted at regular intervals automatically. You can change this interval from the Initial
Setup menu (see Auto Chapter on page 27).
1
the title
Play
At the
malfunction.
(Original
or
Playlist).
you want to start
CHP ADD.
2 press point
A
chapter
?You
can
VR
a new
chapter,
marker icon appears on the TV screen.
also put chapter markers in while recording.
Changing
Caution
?
VR
Markers
Note :
VR
Titles, Chapters, and Parts
Adding Chapter
Title Thumbnails
+RW
Thumbnail
+R
Each title displayed in the Title List menu is represented
by a thumbnail picture taken from the start of that title or
chapter.
If you prefer, select a different still picture from within a
title.
1
Play
the title
(Original
or
Playlist).
Press THUMBNAIL to make the
2 played picture
Original
The still
or
the
Playlist
one
currently
dis-
that appears in the
menu.
picture that you choose
Original or Playlist menu.
appears in both the
Tip
You
can also change the thumbnail picture of the title on
Chapter List-Original or Chapter List-Playlist menu.
Select a chapter on the Chapter List-Original or Chapter
List-Playlist menu, then press THUMBNAIL. The thumbnail picture of the title that includes the chapter is
changed.
the
48
Title and
Making
Chapter Editing (Continued)
New
a
VR
Playlist
Use this function to add
an Original title or chapter to
Playlist. When you do this, the whole title is put into
the Playlist (you can delete bits you don't need later
see Deleting a Title/Chapter on page 50).
the
Adding Additional Title/Chapters
Playlist VR
You
can
add
---
The title appears in the Playlist complete with the chapter markers that appeared on the Original. However, if
even
1
if it is
an Original title or chapter
already registered.
Press MENU/LIST
Title
List-Original
repeatedly
to
to
a
to the
title
Playlist
display
menu.
If you want to show the Chapter List-Original menu,
refer to "Using the Chapter List-Original" on page
you add more chapter markers to the Original later,
these are not automatically copied over into the Playlist
43.
title.
You
add up to 999 chapters to one disc If you
want to add a chapter of a title, use the Adding a
can
.
title/chapter
1
Playlist
on
2
this page.
Press MENU/LIST
repeatedly
display
List-Original menu.
If you want to display the Chapter List-Original
menu, refer to "Using the Chapter List-Original
page 43.
on
Choose
chapter on the Original menu
to put into the Playlist, then press ENTER.
Original (Title or Chapter) options appear on the left
side of the Original menu.
a
title
Choose
an Original title or chapter to put into
Playlist, then press ENTER.
Original menu options appear on the left side of the
the
screen.
to
Title
menu"
2
to the
only
or
Play
Play
Chapter
Title
Delete
Delete
Edit
Edit
Playlist
Playlist
Title
List-Original
Chapter List-Original
Use v / V to select
Play
Play
Chapter
Title
Delete
Delete
Edit
Edit
3 options
'Playlist'
from
Original
menu
then press ENTER.
Select
New
a
Playlist
Playlist
TITLE 1
Playlist
Playlist
Title
List-Original
Use v / V to select
3 options
TITLE 2
Chapter List-Original
'Playlist'
from
Original
Choose
then press ENTER.
Select
a
4 tered
4
Select 'New
The
new
chapters
Playlist
Playlist'
Title
List-Playlist that is already registitle or chapter, then press
a
ENTER.
Playlist
The title
New
a
to insert
or
chapter
appears in the
updated Playlist
menu.
Repeat steps 1-4 to
on the Playlist.
5
ter
6
back to the Title
Press RETURN
add additional title
or
(O) to exit, or MENU/LIST
List-Original menu.
chapto go
then press ENTER.
title appears in the updated
of the title are added to the
Playlist.
Playlist.
All
49
EDITNG
Title and
Deleting
VR
a
Chapter Editing (Continued)
Title/Chapter
+RW
Deleting
+R
If you erase a title or chapter from the Playlist menu on
DVD-RW discs formatted in VR mode, you only remove
it from the Playlist; the title/chapter remains in the
Original
menu.
If you choose to delete a title or chapter from Title List
Chapter List menu, the title or chapter is actually
You
can
1
Title
remaining time available
for recording increases. Titles/chapters deleted from the
Original are also removed from the Playlist.
delete
part which you do
a
Press MENU/LIST
List-Original
not want in the title.
repeatedly to display
Title List-Playlist menu.
or
2
Use vVbBto choose a title you want to
delete then press ENTER.
The options appears on the left side of the menu.
3
Select 'Delete Part' from the
or
deleted from the disc and the
VR
Part
a
options
on
the
menu.
e.g., If you select "Delete Part"
Original
on
the Title List-
menu.
Note :
It may not be possible to delete
than 5 seconds long.
1
2
On the Title List
bBto choose
chapters
Chapter
chapter or
or
that
are
Play
less
Chapter
List menu,
a
title you want to
delete then press ENTER.
Options appears on the left side of the screen.
Select 'Delete' from the
options
e.g., If you select "Delete"
on
on
the
the Title
Title Name
Delete
use vV
Delete Part
Edit
Playlist
menu.
List-Original
menu.
4
Press ENTER.
Title Edit
(Delete Part)
menu
appears
on
the TV
screen.
'Start Point' icon is
Play
Chapter
highlighted.
Title Edit
Title 1
Delete Part
20/8 00:35:42
Delete
Edit
Playlist
Start Point
End Point
0:00:00.00
Cancel
3
4
Press ENTER to confirm.
The confirm message for
6
will appear.
Starts
Repeat steps
1
-
the new,
updated
menu
6
is
(O) repeatedly
7
to exit the
menu.
8
Notes :
?
When DVD+RW
changed
?
If
more
titles
?
recording,
are
combined into
repeatedly deleted,
is
the
one.
When you are deleting a title or chapter,
one on DVD+R/RW increases remaining
time.
name
only the last
recording
pause step, search and
use
starting point.
starting point
of the section
you want to delete.
'End Point' icon is highlighted.
part is indicated
on
the
Progress
Bar.
Use pause step, search and slow-motion to find
the
ending point.
Press ENTER at the
ending point
you want to delete.
You can cancel the selected
9
point,
of the section
v / V to
use
After you finish editing, select the 'Done' icon
then press ENTER.
The confirm message for
10Use
deleting
will appear.
b / B to select 'Yes' then press ENTER.
The selected
List-Original
50
and
to find the
Close
select 'Cancel' icon then press ENTER.
to 'Deleted Title'.
than two titles
are
the deleted title's
Move Point
Press ENTER at the
The
4 to continue to delete from the
menu.
Press RETURN
playback
5 slow-motion
Use b / B to select 'Yes' then press ENTER.
chapter or title is deleted.
pressing ENTER,
displayed.
5
deleting
The selected
After
Select
Done
part is deleted from the title and Title
or
Title
List-Playlist
menu
appears.
Title and
Naming
You
1
Chapter Editing (Continued)
VR
Title
a
can name
titles
Video
+RW
Combining
+R
VR
independently.
On the Title List menu, use vVbBto choose
the title you want to name then press ENTER.
Options
on
appears
the left side of the
Use v/V to select the 'Title Name'
2 press
menu.
option
Use this function to combine two
Original chapters
Into One
into
adjacent Playlist
or
one.
This function is not available if there is
only
one
chapter
within the title.
menu
appears.
e.g., If you select "Title Name"
Original
Chapters
+R
Note :
then
ENTER.
Keyboard
Two
+RW
on
the Title List-
1
On the
Chapter List menu, select the second
chapter of the two chapters you want to combine then press ENTER.
Chapter List options appear
menu.
on
the left side of the
menu.
Play
2
Chapter
Title Name
Delete
Delete Part
Edit
Use v / V to select 'Combine'.
The combine indicator appears between the two
chapters you want to combine.
e.g., If you select "Combine"
Playlist
on
the
Chapter
List-
menu.
Playlist
3
Enter
Play
for the title. Use vVbBto select
a name
a
character then press ENTER to confirm your
selection. Refer to step 5 as shown on page 28
Title
(Disc Label).
Delete
Combine
Move
Edit
Title 1
Alphabet Capital
123456789
0
ABCDE
J
FGH
I
3
KLMNOPQRST
Press ENTER to confirm.
After
pressing ENTER,
played.
the
updated
menu
is dis-
UVWXYZ
OK
Cancel
Space
Delete
Choose OK then press ENTER to save the
return to the previous menu display.
4 and
5
Press RETURN
(O) repeatedly
name
to exit the
menu.
Notes :
?
?
?
Names
can be up to 21 characters long.
For discs formatted on a different DVD Recorder, you
will see only a limited character set.
When
recording
on
discs, the entered
player only
DVD-R, DVD+R
name
is
displayed
or
DVD+RW
on
the DVD
after finalization.
51
EDITNG
Title and
Moving
Chapter Editing (Continued)
VR
Playlist Chapter
a
Protect
Use this function to re-arrange the playing order of the
Playlist chapters on the Title List-Playlist menu.
1
Press MENU/LIST
repeatedly
to
display
List-Playlist
display the Chapter List-Playlist
"Using the Chapter List-Playlist" on
Title
menu.
To
1
2
Note :
This function is not available if there is
Chapter List
Title 1
6/27 Sun
Playlist
only
one
chapter.
3
or
+RW
Title
Use this function to
editing
menu, refer to
page 44.
a
deleting
+R
protect against accidental recording,
of the title.
Press MENU/LIST to
display
Use vVbBto choose
a
the Title List
title you want to pro-
tect then press ENTER.
Options appear on the left side of the
Select 'Protect' from the
menu.
screen.
options.
Play
0:25:45
1/9
Full
Play
Chapter
Delete
Select
2
Select
a
chapter
LIST
from the
Protect
Close
Original
Edit
Chapter List-Playlist
menu.
Press ENTER.
3 Chapter List-Playlist options
of the
appear
on
the left side
4
Press ENTER to confirm.
The lock mark will appears
Use v / V to select 'Move' from
4 options then press
ENTER.
Play
Title
Delete
Edit
Combine
Move
Use vVbBto choose the
place you want to
chapter to then press ENTER.
pressing ENTER, updated menu is displayed.
move
After
52
the title's thumbnail.
Tip
Playlist
If you select a title that has already been protected on
the Title List menu, you can 'unprotect' it by choosing
"Protect" from the Title List menu options. After doing
that, you
5
on
menu.
the
can
edit and delete the title.
Title and
Hide
a
Chapter Editing (Continued)
Chapter
+RW
Use this function to hide
a
Dividing One
+R
chapter
on
Chapter
List
Use this command to
menu.
1
On the
Chapter List menu,
choose a chapter you want
use
vVbBto
2
split
title up into two
a
titles.
to hide then press
screen.
appear
on
the left side of the
Select ''Hide' from the
screen.
Select 'Divide' from the Title List
2
options.
menu
options.
Play
e.g., If you select "Hide"
Play
on
the
Chapter
List
menu.
Full
Play
Chapter
Combine
Delete
Title
Hide
Edit
Title Name
Protect
Divide
Edit
3
new
On the Title List menu, select a title you want to
divide then press ENTER.
The menu options appears on the left side of the
1
ENTER.
Options
+RW
Title Into Two
Press ENTER to confirm.
The
chapter's
thumbnail will dim.
Press ENTER after the 'Divide'
3 lighted.
Tip
If you select a chapter that is already dim on the
Chapter List menu, you can 'show' it by choosing
"Show" from the Chapter List menu options. After
that, you
are
able to
see
Title Edit
(Divide)
menu
option
is
high-
appears and goes into
STOP mode.
doing
the title.
Current
Title Edit
Divide
picture
Title 1
20/8 00:35:42
The first title's
thumbnail
#01
00:00:00
The second title's
thumbnail
Divide
00:00:00
Cancel
Select
Done
Move Point
Use
pause step,
4 the point
you
Close
search and slow-motion to find
want to divide the title.
5
When the 'Divide'
ENTER at that
You
option
point.
can remove
the
Edit
is
highlighted, press
dividing point
and exit the Title
v / V to select 'Cancel'
(Divide) menu,
option then press ENTER.
use
The division
point
is
removed.
6
Choose 'Done'
the
option
dividing point.
then press ENTER to fix
The title is divided into two
new
titles. It take up to
4 minutes to divide.
53
EDITNG
Additional Information
To overwrite
a new
video
recording
on a
previously
title, follow these steps. This feature is not
available for DVD+Rs, that always record at the end of
1
2
+RW
You
the Disc.
input
you want to record
source
display
the Title List
menu.
DVD+RW
Title 1
1:07:16
that is
displayed on the other
playing DVD+RW or
menu
of
capable
Insert DVD+R
1
already.
2
Title List
or
DVD+RW disc recorded
1/12
Title List
Original
HQ
view the Title List
player
DVD+R discs.
channel, AV1-2, DV).
Press MENU/LIST to
+R
can
DVD
(TV
displayed
or Players
menu
other DVD Recorders
on
recorded
Select
Title List
Viewing
+RW
Overwriting Recording
Title 2
12/7
0:16:00
Press TITLE in
menu
Play
mode.
will appear
as
shown below.
Title 3
12/9
0:35:00
12/10
0:30:00
Tip
Free
You
Title 4
Title 5
12/13
0:08:00
Select
DISPLAY
12/16
0:10:00
Info
12/19
menu
by pressing
(x).
0:15:00
REC
the Title List
can remove
STOP
Title 6
Close
DVD+RW
Title List
3
Use vVbBto choose
a
title you want to
over-
write.
TITLE 1
TITLE 2
0:16:00
12/7
4
0:30:00
12/10
Press REC
Overwrite
(z) to start overwrite recording.
recording starts from the start point of
the
title.
5
TITLE 3
0:35:00
12/9
TITLE 4
Press STOP
The
TITLE 5
12/13
new
(x)
stop the overwrite recording.
title is created and updated menu is dis-
0:08:00
0:10:00
12/19
0:15:00
1/2
to
played.
TITLE 6
12/16
3
To
play
back
a
title, select the title you
then press ENTER
or
N
want
(PLAY).
Notes :
This function is not available for
If the overwrite is
of the current
longer
title, the
But if next title is
a
protected title.
recording length
than the
next title is overwritten.
the
Playing
Your
Other DVD
Recordings on
Players (Finalizing
protected,
overwriting stops
at the starting point of the title.
If the selected title's recording length is less than 10
Most
seconds, the
DVD-RW discs recorded in VR
title is
next title is overwritten. But if the next
protected, overwriting stops.
regular
DVD
recorded in Video
players
can
play
Check the manual that
came
players
or
can
also
mode, finalized
with the other
check what formats of discs it will
Finalizing
Disc)
finalized discs
mode, finalized DVD+R
DVD+RWs. A small number of
a
play
or
not.
player
to
play.
'saves' the
that the disc
can
be
recordings and editings in place so
played on a regular DVD player or
computer equipped with
a
suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen
navigating the disc. The menu can be accessed by
pressing MENU/LIST or TITLE.
To finalize
a
disc, refer
to "Finalize"
on
for
page 28.
Notes :
Unfinalized DVD+RW is
playable
on
regular
DVD
players.
The edited contents of
a DVD+RW disc is compatible
regular DVD players only after finalization.
Any edited contents of the DVD+R disc are not
compatible on regular DVD players. (Hide, chapter
combine, added chapter mark, etc.)
on
54
Language Code
and
Country Code
List
Language Codes
Use this list to
Disc
input
your desired
language
for the
following
initial
settings:
Audio, Disc Subtitle, Disc Menu.
Language
Code
7678
Language
Singhalese
Code
7074
Language
Lingala
Code
6566
Language
Fiji
Code
Abkhazian
Afar
6565
Finnish
7073
Lithuanian
7684
Slovak
8375
Afrikaans
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
Ameharic
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
8476
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yo ruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
Country
Choose
a
8373
8471
8479
Codes
country code from this list.
Country
Afghanistan
Argentina
Code
Code
Country
Malaysia
Code
ET
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
Country
Code
AR
Country
Ethiopia
Fiji
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
HU
AF
SG
SK
Chile
CL
Hong Kong
Hungary
Switzerland
CH
CN
India
IN
Nigeria
Norway
NG
China
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
KW
Portugal
PT
Uzbekistan
UZ
LY
Romania
RO
Vietnam
VN
LU
Russian Federation
RU
Zimbabwe
ZW
Czech
Republic
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
Egypt
EG
El Salvador
SV
Libya
Luxembourg
UG
55
REF NC
Controlling
You
can
Your TV with the
control the sound
level, input
power switch of your LG TV with the
source, and
supplied
remote.
Controlling
You
You
can
control your TV
using
Remote
Supplied
the buttons below.
can
other TVs with the remote
control the sound
level, input
source, and
power switch of non-LG TVs as well. If your TV is listed
in the table below, set the appropriate manufacturer
code.
1.
While
holding down TV POWER button, press
the number buttons to select the manufacturer
code for your TV
2.
(see
the table
below).
Release TV POWER button.
Code numbers of controllable TVs
TV Control
Buttons
If
more
them
than
one
at
one
code number is
listed, try entering
time until you find the
a
one
that works with
your TV.
You
POWER
Turn the TV
AV
Switch the TV's
can
on or
off.
input
source
between the TV and other
input
sources.
Adjust
MUTE
Temporarily
press again
56
1
(Default),
Zenith
1,3,4
Samsung
6,7
Sony
8,9
Hitachi
4
2
the sound level of the TV.
turn TV sound
to restore.
Depending
on
function
the
on
your TV,
TV,
some or
even
after
all buttons may not
entering
the correct
manufacturer code.
If you enter
a new
code
number, the code number
previously entered will be erased.
After you replace the batteries in the remote,
Scan up or down through
memorized channels.
VOL +/--
Code Number
LG / GoldStar
Notes :
By pressing
PR +/--
Manufacturer
OFF,
the code
number you have set may be reset to the default
setting. Re-enter the appropriate code number again.
Troubleshooting
Check the
following guide
for the
possible
cause
Symptom
of
a
before
problem
contacting
service.
Solution
Cause
No power.
The power cord is disconnected.
Plug the power
securely.
No
The TV is not set to receive DVD
Select the
Recorder
on
picture.
signal output.
the TV
cord into the wall outlet
appropriate video input mode
the picture from the DVD
so
Recorder appears
The video cable is not connected
on
the TV
Connect the video cable
screen.
securely.
securely.
The connected TV power is turned off.
No sound.
The
equipment connected with the
cable(s) is not set to receive
Recorder signal output.
audio
The audio cables
are
Turn
the TV.
on
Select the correct
DVD
not connected
Audio Receiver
input
mode
the
on
you can listen to the
sound from the DVD Recorder.
so
Connect the audio cable
securely.
securely.
The power of the equipment connected
with the audio cable is turned off.
The audio
The
playback picture
is
connecting
The disc is
cord is
damaged.
Turn
the
on
connected with
equipment
the audio cable.
it with
Replace
new one.
Clean the disc.
dirty.
poor.
The DVD Recorder
does not start
No disc is inserted.
Insert
a
disc.
cator in the
playback.
An
unplayable
disc is inserted.
Insert
a
(Check that the disc
display window is lit.)
disc.
playable
indi-
the disc
(Check
type, color system, and regional code.)
The disc is
placed upside
down.
Place the disc with the
side
playback
down.
The disc is not
within the
placed
guide.
Place the disc
inside the
The disc is
dirty.
The
level is set.
Rating
picture from the
input is distort-
external
The video
Cancel the
from the external
signal
com-
ponent is copy-protected.
Some channels
are
Those channels
are
Aerial
Camcorder
Camcorder is off.
is not
or
cables
are
loose.
function
or
change
Connect the
component directly
to your
Restore channels. See
"Program
Edit"
pages 20-21.
Tighten
connections
Turn camcorder
on
replace
or
and
cable.
operate
properly.
shown.
Camcorder
A/V
Rating
level.
You cannot connect via this Recorder.
on
picture or sound of
broadcasting channel is
weak or missing.
The
image
not stored in the
Recorder.
when
rating
TV.
ed
skipped over
usingv/V.
tray correctly
Clean the disc.
the
The
the disc
on
guide.
input
or
image
via
DV IN to
DVD Recorder INPUT SELECT is
Use AV to select
incorrect.
AV2, DV, etc.)
input
channel
(AV1,
DVD Recorder is not
shown
on
TV
screen.
57
REF NC
Troubleshooting (Continued)
Can't
The disc
play a disc
using this
recorded
Recorder
on
Solution
Cause
Symptom
Some
another
was
recorded in Video mode.
Finalize the disc.
will not
No solution.
players
play
final-
even a
(page 28)
ized disc recorded in Video mode.
player.
The disc
was
recorded in VR
The other
mode,
player must
play it.
be RW
compati-
ble in order to
Discs recorded with copy-once material
played on other players.
No solution.
The
Use another disc.
cannot be
Cannot record
not record
or
did
successfully.
remaining
blank space
The
source
copy
you
are
to record is
trying
setting
the
channel is tuned
When
to
recording
is not
the
recording channel,
on
a
the TV's
own
Video mode
programs that are copy-once
cannot be recorded.
recording
possible.
tuner.
cor-
rect time.
programmed
Timer record indicator
appear after
TV is not
is not
present.
the Recorder's
light does
programming timer.
not
on
built-in TV tuner.
once
a
VR mode formatted disc for copy-
material.
Set clock to correct time. See "Clock
page 22.
on
Reprogram
Recording"
incorrectly.
Playback
Select the channel
Set"
Timer has been
and/or
source.
Use
disc,
protected
Clock in DVD Recorder is not set to
Stereo Audio Record
You cannot record the
protected.
When
Timer
the disc
on
is insufficient.
Reprogram
Stereo-compatible.
No solution.
Broadcast program is not in stereo for-
No solution.
Timer. See "Timer
page 39.
on
Timer.
mat.
DVD Recorder A/V Out
connected to TV A/V In
jacks are
jacks.
Make A/V connections. Stereo is
not
available
only
via A/V
output from DVD
Recorder.
DVD Recorder Audio/Video Out is not
selected for
viewing
Select AUX
or
A/V
source as
TV
input.
at the TV.
DVD Recorder's TV audio channel is set
Set TV audio channel mode to Stereo.
to
See
mono.
"Changing
TV audio channel"
on
page 38.
The Remote Control
The Remote Control is not
does not work
remote
properly.
sensor on
pointed
at the
the DVD Recorder.
Point the Remote Control at the remote
sensor on
The Remote Control is too far from the
Operate
the DVD Recorder.
the Remote Control within 7
m.
DVD Recorder.
There is
an
obstacle in the
path
of the
Remove the obstacle.
Remote Control and the DVD Recorder.
The batteries in the Remote Control
are
Replace
the batteries with
new ones.
exhausted.
Moisture Condensation
Moisture condensation
?
If the DVD Recorder is moved from
warm
In locations where moisture condensation may
can occur:
a
cold
place
to
a
?
Keep
the DVD Recorder
plugged
outlet with POWER On. This will
place.
into
an
occur:
AC power
conden-
help prevent
sation.
?
Under
extremely
humid conditions.
?
If condensation has
DVD Recorder to
58
occurred, wait
dry
before
using
a
it.
few hours for the
Specifications
General
Power
AC
Power
30W
requirements
consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Television
110-240V, 50/60 Hz
430
x
69
x
280
mm
(w
h
x
x
d)
3.8Kg
5˚C to 35˚C
REF NC
5 % to 90 %
system
PAL
Recording
format
PAL
B/G, PAL I/I, SECAM D/K colour system
Recording
format
DVD Video
Recording
Recordable discs
Recording,
DVD-VIDEO
DVD-ReWritable, DVD-Recordable, DVD+ReWritable, DVD+Recordable
Recordable time
Approx.
6 hours
recording format
Sampling frequency
Compression format
Audio recording format
Sampling frequency
Compression format
1 hour (HQ mode),
(EQ mode)
2 hours
(SQ mode),
4 hours
(LQ mode),
Video
27MHz
MPEG 2
48kHz
Dolby Digital
Playback
Frequency
DVD
(PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz to
DVD(PCM96kHz):8Hzto44kHz
More than 100 dB (AUDIO OUT connector)
Less than 0.008% THD (AUDIO OUT connector)
More than 95 dB (AUDIO OUT connector)
response
Signal-to-noise
ratio
Harmonic distortion
Dynamic
range
20 kHz
Inputs
ANTENNA IN
Antenna
VIDEO IN
input,
75 ohms
AUDIO IN
0
ohms, sync negative, RCA jack x 2
dBm more than 47 kohms, RCA jack (L, R) x 2
DV IN
4
pin (i.LINK/IEEE
1.0
Vp-p
75
1394
standard)
Outputs
VIDEO OUT
1 Vp-p 75 Ω, sync negative, RCA jack x 1
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin
(C)0.3V(p-p)75Ω
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
0.5 V (p-p), 75 Ω, RCA jack x 1
3 V (p-p), 75 Ω, Optical connector x 1
2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
S-VIDEO OUT
COMPONENT VIDEO OUT
Audio
output (digital audio)
output (optical audio)
Audio output (analog audio)
Audio
x
1
Accessories:
Videocable.............................1
Audiocable(L,R)................1
RFCoaxialCable.........................1
Remotecontrol..................1
Batteries...............................2
Design
and
specifications
are
subject
Manufactured under license from
marks of
Dolby
DTS and DTS
to
Dolby
change
without notice.
Laboratories.
"Dolby",
"Pro
Logic"
and the double-D
symbol
are
trade-
Laboratories.
Digital
Out
are
registered
trademarks of
Digital
Theater
Systems,
Inc.
59
P/NO
:
3834RD0040P
Download PDF

advertising