LG DV5942P Owner’s Manual
PDF
Download
Document
Advertisement
Advertisement
DVD PLAYER OWNER'S MANUAL MODEL : DV5942P Before connecting, operating please read this instruction booklet or adjusting this product, carefully and completely. Safety Precautions WARNING NOTES ON COPYRIGHTS: It is forbidden RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash equilateral triangle with arrowhead symbol is intended to alert the within user an to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient to constitute magnitude by law to copy, broadcast, show, broadcast play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs on a VCR, picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. via cable, a risk of electric shock to persons. SERIAL NUMBER: The serial number is found The exclamation point within is intended to alert the important operating user an equilateral triangle to the presence of and maintenance instructions in the literature (servicing) accompanying the product. SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION: This To Digital ensure Video Disc proper use Player employs of this a Laser product, please System. read this owner's manual carefully and retain for future reference should the unit require maintenance, contact an authorized service location (see service procedure). Use of controls, adjustments, other than those specified or the performance of procedures herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be 2 placed on the apparatus. the back of unique to this unit and not available others. You should record requested information here and retain this guide as a permanent record of your purchase. Model No. Serial No. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC on this unit. This number is ___________________________________ ___________________________________ to Table of Contents Introduction SafetyPrecautions.........................2 TableofContents..........................3 BeforeUse..............................4-5 PlayableDiscs...........................4 Precautions.............................5 NotesonDiscs..........................5 AboutSymbols..........................5 .6 FrontPanelandDisplayWindow. . . . . . . . . . . . Operation withAudioCDandMP3Discs. PlayinganAudioCDandMP3Discs. . . . . . . . . . . . . .18 .18 Pause.............................18 MovingtoanotherTrack................18 RepeatTrack/All/Off..................18 Search.............................18 Random...........................18 RepeatA-B.........................18 3DSurround........................18 . RemoteControl............................7 RearPanel................................8 .18 ChangingtheAudioChannel. ProgrammedPlayback.....................19 Programmed Playback with Audio CD . . . . . . . . . . andMP3Discs.........................19 Preparation RepeatProgrammedTracks. ErasingaTrackfromProgramList. ErasingtheCompleteProgramList. ProgrammedPlaybackwithVideoCD . Connections............................9-10 ConnectingtoaTV.......................9 .10 ConnectingtoOptionalEquipment. BeforeOperation.......................11-14 GeneralExplanation......................11 On-ScreenDisplay.......................11 InitialSettings........................12-14 12 Initial Settings General Operation Language..........................12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 .19 .19 .19 AdditionalInformation...................20-22 LastConditionMemory...................20 ScreenSaver...........................20 VideoModeSetting......................20 ControllingtheTV.......................20 NotesonMP3Discs.....................21 Picture.............................12 Sound.............................13 Others(DRC/Vocal/PBC)...............13 ParentalControl......................14 Operation .15-17 OperationwithDVDandVideoCD. PlayingaDVDandVideoCD...............15 . . . . . . . . Reference Troubleshooting..........................22 SpeakerSettings..........................23 LanguageCodeList.......................24 CountryCodeList.........................25 Specification.............................26 GeneralFeatures........................15 MovingtoanotherTITLE...............15 15 Moving to another CHAPTER/TRACK . . . . SlowMotion.........................15 Still Picture and About the symbols for instructions . 16 Frame-by-Frame Playback Repeat............................16 RepeatA-B.........................16 . TimeSearch........................16 3DSurround........................16 Indicates hazards itself or likely to cause damage. harm to the unit other material Indicates special operating Indicates tips and hints for features of this unit. making the task easier. Zoom..............................17 MarkerSearch.......................17 SpecialDVDFeatures....................17 TitleMenu..........................17 DiscMenu..........................17 CameraAngle.......................17 .17 ChangingtheAudioLanguage. . . . . . . . . . Subtitle............................17 3 INTRODUC Before Use Playable Disc-related terms Discs Title The main film content (8cm/12cmdisc) or (VCD) (8cm/12cmdisc) you to locate it Audio CD (8cm/12cmdisc) In addition, this unit can play or a SVCD, CD-R accompanying or feature content additional feature content, or music album. Each title is assigned a title reference number Video CD that contains audio titles (DVD only) DVD or CD-RW MP3 files. enabling easily. Chapter (DVD only) Sections of a picture or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters may not be recorded. Notes -- Depending ment on the conditions of the the CD-R/RW disc or discs cannot be -- The unit cannot played on play discs itself, recording equip- some CD-R/RW Track that contain data, other a CD and audio CD picture or a enabling only) piece on a video CD assigned a track number, musical audio CD. Each track is or an the unit. (Video Sections of you to locate the track you want. than MP3 and CD-DA data. -- -- Do not attach any seal or label to either side labeled side or the recorded side) of a disc. Do not or irregularly shaped octagonal). It may result in use Notes on CDs (the (e.g., heart-shaped malfunctions. DVDs and Video CDs playback operations of DVDs and Video CDs may intentionally fixed by software manufacturers. As this unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some play- Scene On video CD with PBC (Playback control) functions, pictures are divided into sections called "Scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling a moving pictures and still you to locate the scene you want. A scene is composed of one or several tracks. Some be Types There of video CDs are two types of video CDs: equipped with PBC (Version 2.0) (Playback control) functions allow you to interact back features of the unit may not be available or other functions may be added. Refer also to the instructions supplied with the DVDs Video CDs and Video CDs. Some DVDs made for business purposes may not be played on the unit. typical computer-like operations. Moreover, of high resolution can be played if they are PBC with the system via menus, search functions, or still other pictures included in the disc. Regional code of the DVD player and DVDs 4 player designed for playback of region "4" encoded DVD software. The region code on the labels of some DVD discs indicates which type of player can play those discs. This unit can play only DVD discs labeled "4" or "ALL". If you try to play any other discs, the message "Check Regional This DVD is and manufactured Code" will appear on the TV screen. Some DVD discs may not have a region code label even though their playback is prohibited by Note To avoid on area limits. DTS-encoded CDs possible damage to the audio system, turn down the volume before playing back such discs, adjust the volume gradually, and keep the volume level low. To enjoy DTS Digital SurroundTM playback, an external 5.1 channel DTS Digital SurroundTM decoder system must be connected to the digital output of the unit. 4 Video CDs not equipped with PBC (Version 1.1) Operated way as audio CDs, these discs allow playback of video pictures as well as sound, but they are not equipped with PBC. in the same Before Use (Continued) After the unit Handling discs Storing Precautions playing, store the disc in its case. When Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sun- The light, shipping the unit original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio during playback. In this case, position may be distorted the unit away from the TV, VCR, unit after removing the disc. To keep Do not near or radio, or turn off the volatile liquids, such as the unit. Do not leave rubber leave marks on a long period ter out. plastic products in of time. They will the surface. soft, dry cloth. If the surfaces soft cloth solution. Do not benzine, Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the centure insecticide spray, or To clean the cabinet a discs the unit Cleaning use a Cleaning temperature the exterior surfaces clean use contact with the unit for Use as there may be a considerable increase inside the car. use thinner, or are moistened with lightly strong as a extremely dirty, mild detergent solvents such these as might damage alcohol, the surface Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older About records. vinyl Symbols of the unit. About the To obtain clear picture The DVD player is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer. a " may appear on the TV This icon means the function manual is not available About the disc on Discs DVD VCD2.0 Handling on playback side of the disc. by the edges so that fingerprints VCD1.1 Do not touch the get the surface. Do not stick paper during operation. explained in this owner's that specific DVD video disc. symbols screen for instructions of the following symbol is represented by the symbol. one to the disc DVD Video CDs with the PBC (playback control) function. discs Hold the disc on A section whose title has applicable only Notes symbol display " or tape on the disc. Video CDs without the PBC (playback control) function. will not CD MP3 Audio CDs. MP3 disc. 5 INTRODUC Front Panel and Display Window POWER Switches the player Forward Skip/Scan ( T / R ) Go to NEXT chapter/track. ON and OFF. Press and hold for two seconds for Standby indicator Lights red when the player in Standby mode (off). a fast forward search. Skip/Scan ( Q / S ) chapter/track or to PREVIOUS chapter/track. Reverse is Go to beginning of current Press and hold for two seconds for a fast reverse search. STOP(9) Stops playback. Pause PAUSE(;) playback temporarily/ press repeatedly for frame-by-frame playback. PLAY(2) playback. Starts Disc Insert a Tray disc here. Opens or OPEN/CLOSE ( closes the disc tray. / ) / / Remote Sensor Point the DVD Display remote control here. Player window Shows the current status of the ANGLE active TITLE Indicates current title number CHP/TRK DVD player. Indicates current chapter or track number DVD inserted Indicates total CD Audio CD inserted playing time/elapsed time VCD Video CD inserted MP3 PROG. MP3 disc inserted Programmed playback RANDOM Indicates current player active RANDOM playback active function: Playback, Pause, etc. Indicates mode MP3 VCD 6 CD DVD TITLE CHP/TRK PROG. RANDOM ALL AB repeat Remote Control DVD/TV select button Selects OPEN/CLOSE mode of remote operational Player - ON and OFF. POWER OPEN/CLOSE - display DVD 2 - 4 3 (left/right/up/down) Selects - an item in the DISPLAY RETURN changes menu on a TV AV SELECT volume of TV. ENTER VOL Removes the the Displays setup INTRODUC menu. of menu video CD a - Selects AUX A/V channel. input VOL MENU SELECT/ENTER TITLE Acknowledges PR./CH DVD disc. turns off TV sound. with PBC. PR./CH MENU Accesses - menu Selects channel of TV and during playback. RETURN/TV AV TV SOUND/MUTE - 1 Selects 3D SURROUND disc DISPLAY Accesses On-Screen tray. SOUND/MUTE POWER Switches DVD and closes the disc Opens control. SLOW PAUSE/STEP STOP selection. menu SLOW TITLE ReverseSLOW(,)? Reverse slow playback. SKIP/SCAN PLAY available. PAUSE(;)? playback temporarily/ press repeatedly for frame-by-frame playback. PROGRAM ? Pauses ? REPEAT A-B RANDOM ZOOM MARKER SEARCH Selects audio an Selects a subtitle a DVD camera angle Accesses or removes setup Marks any Removes if ? ? ? sensor AAA AAA remote track number on the from the front of the sensor. About 30° in each direction of the front of the all. sequence. RANDOM tracks in random order. ZOOM battery video image. installation Detach the battery the remote control, and insert cover on (size AAA) batteries aligned correctly. and press the buttons. Angle: a A-B Plays ? menu. Operation Range (7 m) menu. program REPEAT Repeat ? Point the remote control at the remote remote or removes Repeat chapter, track, title, ? Remote control Distance: About 23 ft track. program menu or a mark on the MARKER SEARCH menu. ? Enlarges Remote Control or CLEAR point during playback. MARKER SEARCH ) ? ? SEARCH Displays S PROGRAM menu. MARKER ( Press and hold button for about Accesses available SETUP ) chapter two seconds. ? language. ANGLE Selects * language (DVD) or (CD). SUBTITLE Reverse SKIP/SCAN previous chapter a menu. audio channel an T Search backward*/ go to beginning of current chapter or track or go to 0-9 numberl buttons AUDIO ( ?PLAY(2) Starts playback. AUDIO SUBTITLE ANGLE SETUP ForwardSLOW(.)? Forward slow playback. Forward SKIP/SCAN Search forward*/ go to next or track. CLEAR STOP(9)? Stops playback. Selects numbered items in the discs Title menu, if Displays SKIP/SCAN with the rear of two R03 and Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). sensor. 7 Rear Panel VIDEO OUTPUT Switch Select either S-VIDEO OUT VIDEO OUT, depending or COAXIAL COMPONENT (Digital audio out jack) digital (coaxial) audio equipment. Connect to how you connected the DVD Player to the TV. on COMPONENT VIDEO OUT Connect to OPTICAL a (Y Pb Pr) inputs. TV with Y Pb Pr (Digital audio out jack) digital (optical) audio equipment. Connect to AUDIO OUT Connect to *System Select switch (Left/Right) amplifier, receiver, an or stereo system. DIGITAL OUT 5.1CH AUDIO OUT FRONT VIDEO OUT AUDIO OUT Pr L Pb R COMPONENT REAR L COAXIAL DIGITAL OUT R S-VIDEO COMPONENT VIDEO OUTPUT OPTICAL S-VIDEO CENTER Y WOOFER VIDEO OUT OUT S-VIDEO OUT Connect to a TV with S-Video inputs. AC Power Cord 5.1 CHANNEL AUDIO OUT Connect to -- speaker into the power connection connections VIDEO OUT connections Connect to Dust protection * cap Remove the dust protection cap from the OPTICAL DIGITAL OUT jack and connect the optical digital cable (not supplied) securely so that the configurations of both the cable and the connector match. Keep the dust protection cap and always reattach the cap when not using the connector to protect against dust intrusion. System You NTSC NTSC: Select when DVD by using System appropriate system. player is connected with PAL-TV. player is connected with player is connected with NTSC-TV. Select when DVD system When the selected picture ? Set off. 8 PAL discs Select when DVD coincide with the Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. or PAL: ? cap inputs. Select switch to choose the Multi protection TV with video a Select switch enjoy can AUTO: Dust source. subwoofer connection front speakers (surround) speakers -- rear 5.1 channel receiver center -- -- a Plug System system may not be System TV. Select switch does not of your TV, normal color displayed. Select switch when the power is turned Connections Tips Depending Component your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections on described below. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the Video (Color Stream ) connection Connect the COMPONENT VIDEO OUT 1 jacks on Player to the corresponding in jacks on the using an optional Y Pb Pr cable (C). the DVD TV 2 Connect the Left and Right AUDIO OUT jacks of Player to the audio left/right in jacks on the (A) using the supplied audio cables. the DVD TV best connections. For better sound reproduction, connect jacks to the audio in jacks AUDIO OUT the amplifier, receiver, See "Connecting to optional equipment" stereo player's of your audio/video equipment. or on Rear of TV S-VIDEO INPUT page 10. COMPONENT VIDEO INPUT Pr Pb VIDEO AUDIO INPUT Y INPUT R L L Caution -- Make directly to the input channel. Do not connect the DVD Player's AUDIO OUT jack to the phono in jack (record deck) of your audio system. Do not connect your DVD Player via your VCR. The DVD image could be distorted by the copy protection sure the DVD Player is connected TV. Tune the TV to the correct video -- -- S C A V system. Connecting Make one of the to a TV following connections, depending capabilities of your existing equipment. When using the COMPONENT VIDEO OUT on the jacks, set the VIDEO OUTPUT switch to COMPONENT. When using the S-VIDEO OUT jack, DIGITAL OUT COAXIAL DIGITAL OUT S-VIDEO. S-VIDEO COMPONENT VIDEO OUTPUT OPTICAL Connect the VIDEO OUT the DVD the video in the video cable jack supplied (V). on the jack on TV using Player VIDEO OUT AUDIO OUT Pr L Pb R COMPONENT R Video connection 2 REAR L OUTPUT switch to 1 5.1CH AUDIO OUT FRONT set the VIDEO S-VIDEO OUT CENTER WOOFER Y VIDEO OUT to Rear of DVD player Connect the Left and Right AUDIO OUT jacks of Player to the audio left/right in jacks on the (A) using the supplied audio cables. the DVD TV S-Video connection 1 Connect the S-VIDEO OUT to the S-Video in S-Video cable 2 jack (S). Connect the Left and the DVD TV on jack the TV Right the DVD the Player supplied AUDIO OUT to the audio Player (A) using the supplied on using left/right in jacks of jacks on the audio cables. 9 PREATION Connections Connecting (Continued) Optional Equipment to Notes -- Connecting to an amplifier equipped with channel analog stereo or Dolby Surround Connect the Left and Right DVD Player to the amplifier, receiver, audio cables (A). stereo audio left or two AUDIO OUT jacks on the and right in jacks on your system, using the supplied If the audio format of the digital output does not match capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder. the -- -- To see screen Connecting to an amplifier equipped with two digital stereo (PCM) or to an Audio/ Video receiver equipped with a multi-channel decoder (Dolby DigitalTM, MPEG 2, or DTS) channel 1 Connect one of the DVD Player's DIGITAL AUDIO OUT jacks (OPTICAL O or COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (optical O or coaxial X) audio cable. Analog Audio Digital Multi-channel sound Audio/Video receiver that audio formats Dolby Digital the logos on supports one or more of the supported by your DVD Player (MPEG 2, DTS). Check the receiver manual and and connection to a multi-channel A/V receiver (Dolby Digital) Player contains a multi-channel decoder. This playback of DVDs recorded in Multi-channel Surround without the need for an optional decoder. enables Connect the CENTER and WOOFER 1 Center and the Subwoofer speaker sponding in jacks jacks for the (C) to the corre- your receiver. on Connect the Left and 2 (F) digital multi-channel connection provides the best sound quality. For this you need a multi-channel 3 to the Right FRONT speaker jacks corresponding in jacks on your receiver. Connect the Left and to the corresponding Make the 4 Output Right REAR speaker jacks (R) jacks on your receiver. in appropriate Sound settings for Analog Speaker Settings in the setup menu. and See page 13. the front of the receiver. Rear of DVD player DIGITAL OUT Caution: Licensing agreement, the digital output digital out when DTS audio stream is 5.1CH AUDIO OUT FRONT REAR COMPONENT VIDEO OUT Pr COAXIAL DIGITAL OUT selected. Pb COMPONENT player OPTICAL DIGITAL OUT 5.1CH AUDIO OUT FRONT REAR VIDEO OUT AUDIO OUT Pr L Pb R COMPONENT VIDEO OUTPUT S-VIDEO CENTER COAXIAL VIDEO OUT R S-VIDEO F COMPONENT VIDEO OUTPUT OPT CAL O X S-VIDEO CENTER C R Y WOOFER VIDEO OUT OUT A Center Subwoofer Front R Rear R Front L Rear L ANALOG 5.1CH AUDIO INPUT Amplifier (Receiver) OPTICAL COAXIAL DIGITAL INPUT Amplifier (Receiver) 10 L R AUDIO INPUT R Y WOOFER OUT L DIGITAL OUT L R S-VIDEO Rear of DVD AUDIO OUT L Due to the DTS will be in DTS on- press AUDIO. This DVD player's digital output. Output" on page 13). A display, with 6 Channel connectors You will need to activate the 2 (See "Digital the audio format of the current DVD in the Before Operation Caution: Before the remote using control, press the DVD button to select the device to be General or TV gives DVD Some DVDs General screen. playback Temporary CHAPT TRACK can the change title can of setting an item. be also be used for number). For some setting functions, setting. Feedback Field Icons Repeat Title Repeat Chapter Repeat Track (non-PBC Repeat AB Repeat A-B OFF Repeat Off Resume displayed on the TV changed on the menu. be (e.g., be can to All Tracks ALL Action display operation Press DISPLAY 1 TITLE Display Some items On-screen 2 basic instructions for status or 2 press SELECT/ENTER to execute the operating the Player. require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the DVD Player or is not available on the disc. On-Screen Press 1 The number buttons numbers operated. Explanation This manual 3 play Video CDs (non-PBC from this prohibited or only) Video CDs only) point not available Notes Some discs may not provide all of the features on the display example shown below. If no button is pressed for 10 seconds, the on-screen display disappears. during playback. on-screen Press 3 or 4 to select an The selected item will be item. highlighted. DVD Items Title Number 1/3 Chapter Number 1/12 Time search 0:16:57 Audio language Digital Audio Output mode 1 ENG and Subtitle language Angle D 6CH OFF 1/1 Sound NORM. VCD2.0 titles, and skips Shows the current title number and total number of to the desired title number. 1/2,or Numbers, SELECT/ENTER Shows the current chapter number and total number of chapters, and skips to the desired chapter number. Numbers , SELECT/ENTER Numbers , SELECT/ENTER Shows the elapsed playing time, and searches the point by the elapsed time directly. 1/2,or Shows the current audio soundtrack language, encoding method, and channel number, and changes the setting. 1/2 Shows the current subtitles changes the setting. 1/2 language, and Shows the current angle number and total number angles, and changes the angle number. Shows the current sound changes the setting. of mode, and 1/2 1/2 VCD1.1 Items Track Number 1/4 Time Audio Channel Sound Selection Method Function (Press 3/4 to select desired item) 0:16:57 Function (Press 3/4 to select desired item) Selection Method Shows the current track number, total number of tracks and PBC On mode, and skip to the desired track number. 1/2,or Numeric, SELECT/ENTER Shows the elapsed playing time (Display only) -- STER. Shows the audio channel, and changes the audio channel. 1/2 NORM. Shows the current sound changes the setting. 1/2 mode, and 11 PREATION Before Initial You Operation (Continued) set your can Menu Settings Select Personal Preferences own on the play- you Language see for the language a setup menu. This is the menu when you press SETUP. er. Initial General Settings Operation Press SETUP. 1 The setup Disc Audio English Disc Subtitle Spanish Disc Menu French Rating German Country menu TV appears. Menu Disc Audio Original Disc Subtitle English Disc Menu French Rating German Country TV Italian Picture Chinese Language Digital Audio Output Speaker Setup Hungarian TV Russian Other------------ Others Aspect screen selected will show the current item, as well as 3 4 require SETUP, RETURN, 5 setup for the setting setting(s). alternate While the desired item is 3/4 to select the desired selected, press 2, then setting. Press SELECT/ENTER to confirm your selection. Some items additional steps. Press or Displays PLAY to exit the menu. Scan style picture are is played off). back in that 16:9 Wide: Select when Disc Audio 4:3 Letterbox Disc Subtitle 4:3 Panscan Disc Menu 16:9 Wide Code Aspect Digital 5.1 for the disc's language a Menu, Audio, and original language set for the disc is selected. language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 24. If you enter the wrong language Original Other : : The To select another code, press CLEAR. Disc Audio Original Disc Subtitle English Disc Menu French Rating German Country TV Code Aspect Menu Spanish Italian Language Chinese Polish Digital 5.1 Output Speaker Setup Others 12 Audio Hungarian Russian Other------------ style(Both sides of the 16:9 wide TV is connected. a Progressive Subtitle. con- bars conventional TV set is Rating DVD masking cut Language Select a with connected. The video material formatted in the Pan & Country Language standard 4:3 TV is images picture. 4:3 Panscan: Select when TV Disc a theatrical above and below the Press 3/4 to select the desired item. The DVD 4:3 Letterbox: Select when nected. 2 Output Others Polish 5.1 Audio Speaker Setup Spanish Code Aspect Menu Language Digital 5.1 Italian Code Aspect Scan Audio Output Speaker Setup Others Before Operation (Continued) Sound Others Audio Digital Output Each DVD disc has The Set the variety output options. player's Digital Audio Output according to the type of audio system you DRC, Vocal and PBC settings can be changed. Press 3/4 to select the desired item and press SELECT/ENTER. The setting of the selected item is of audio a changed use. between On and Off. PREATION DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM" if you connected the DVD Player's DIGITAL OUT jack to a Dolby Digital decoder (or an amplifier or other equipment with a equipment decoder or with a DTS Disc Menu PBC On Country TV Language Digital 5.1 2-channel digital player outputs sounds in the PCM 2ch format when you play a DVD video disc recorded on the Dolby Digital, MPEG1, or MPEG2 recording system. a Code Aspect Menu MPEG decoder. amplifier. Vocal On decoder, Dolby Digital PCM: select when connected to stereo DRC On Disc Subtitle Rating Dolby Digital decoder). Stream/PCM: Select "Stream/PCM" if you connected the DVD Player's DIGITAL OUT jack to an amplifier or other Disc Audio Audio Output Speaker Setup Others The DVD DOLBY Disc Audio /PCM DIGITAL Disc Subtitle Stream/PCM Disc Menu PCM TV Code Menu and the 48 KHz Language format, you can hear a program's soundtrack in the most accurate and realistic presentation possible, Sample Freq. Aspect With the DVD thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds Rating Country Dynamic Range Control (DRC) at a quietest ones). Then, you may listen to a movie losing clarity of sound. Set lower volume without 96KHz DRC to On for this effect. Audio Digital 5.1 Output Speaker Setup Vocal Others Set Vocal to On Sample Frequency is To change the Sample Frequency setting, first select the desired Digital Audio Output as indicated as above. If your receiver or amplifier is NOT capable of handling 96KHz signals, select 48KHz. When this choice is made, this unit will automatically convert any 96KHz signals to 48KHz your system can decode them. If your receiver or amplifier is capable of handling 96KHz signals, select 96KHz. When this choice is so playing. only when a multi-channel karaoke DVD The karaoke channels on the disc will mix into normal stereo sound. PBC Set Playback Control (PBC) On: Video CDs with PBC are Off: Video CDs with PBC are to On or Off. played according to the PBC. played the same way as Audio CDs. made, this unit will pass each type of signal through without any further 5.1 processing. Speaker settings DVD Select speaker settings, including volume balance and delay time, or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 23.) Disc Audio Disc Subtitle R R Disc Menu Rating Front L Country TV Code Aspect Menu Volume Size Language Delay 0dB Small ms Test Digital 5.1 Audio Output Return Speaker Setup Others 13 Before Operation (Continued) Parental Control Rating Movies DVDs may contain on applies to the not suitable for able for selection complete the disc. These scenes on 8, and alternatively, 1 to scenes Therefore, discs may contain Parental Control information that certain DVD Enter the code of DVD children. Code Country more on some suitable discs. disc or scenes are to avail- 8 7 Disc Menu 6 Rating 5 Country TV Code Country TV Menu Audio Digital 2 Output Speaker Setup Unlock Change Others 1 Select 2 While 3 When you have not entered a password yet. Enter a 4-digit password using the numbered but- 3 "Rating" and on the Setup menu using the buttons. 4 "Rating" Audio Output Speaker Setup Others 1 5.1 Language Digital 1 Select 2 3 4 While Code Country the setup 3 Language Code Aspect Menu 4 Aspect US Rating are 5.1 Disc Subtitle Code Set Disc Menu you to prevent discs from being played by your children or to have certain discs played with alternative scenes. Disc Audio were to the list List", page 25.). Disc Subtitle The Parental Control feature allows country-dependent. disc, referring Disc Audio rated from scenes are Ratings Code (See "Country whose standards country/area a used to rate the DVD video step 3 of "Rating" Select the first character Shift the on Code is selected, press 2. Country Follow the 3/4 buttons using menu. cursor using on left. using the 3/4 buttons. 1/2 buttons and select 5 the second character using buttons. Press confirm your country 6 code selection, then press exit the 3/4 is selected, press 2. SELECT/ENTER to SETUP to tons to create a personal 4-digit security password, then press SELECT/ENTER. Enter the 4-digit password again and press SELECT/ENTER to verify. When you have already entered a password; Enter a tons to 4 menu. 4-digit password using the numbered butconfirm the personal 4-digit security pass- Note Confirmation of the the code is below 4-digit password changed (see "Changing ). the word, then press SELECT/ENTER. Changing If you make a mistake before pressing SELECT/ENTER, press CLEAR and enter 4-digit security password again. 1 Follow 2 Enter the old 3 Select rating from 1 to 8 using the 3/4 buttons. One (1) has the least playback restrictions. Eight (8) has the most playback restrictions. Select a Unlock: If you select Unlock, Parental Control is not active. The disc will play in full. Ratings 1 to 8: Some discs contain scenes not suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will be played. Higher unless an rated alternative scenes scene is available The alternative must have the lower one. If no will not be same played on rating Press SELECT/ENTER to confirm your SETUP to exit the as shown above to the left Change using the 3/4 buttons then press 4 Enter the new 4-digit code, then press SELECT/ENTER. 5 Enter exactly the same code a second fy by pressing SELECT/ENTER. 6 Press SETUP to exit the If you forget your 4-digit code If you forget your password, to clear the current pass- 1 Press SETUP to 2 Use the Number buttons to enter the display time and veri- menu. word, follow the procedure below. play- (Rating). code, then press SELECT/ENTER. SELECT/ENTER. the setup menu. 6-digit number "210499". The is cleared. "P CLr" appears on the disThe message will appear if the disc tray is closed. It will be on the display until you try another feature. rating 4-digit password play. menu. 3 14 1-2 code the disc. suitable alternative is found, 5 selection, then press Steps 4-digit or a back will stop. You must enter the 4-digit password or change the rating level in order to play the disc. is necessary when the 4-digit code" Enter a new code as shown above to the left (Rating). Operation Playing a with DVD and Video CD Playback Setup Turn on VCD2.0 Note VCD1.1 input source con- player. system: Turn and select the DVD DVD the TV and select the video nected to the DVD Audio General Features DVD and Video CD on input the audio source Unless stated otherwise, all operations described the remote control. Some use features may also be available system on the Setup menu. connected to the Moving player. to another TITLE DVD 1/3 1 Press OPEN/CLOSE to open the disc tray. When Load your chosen disc in the tray, with the label 2 facing up. double-sided DVD is inserted, make the side you want to play is facing up. When 3 a Press OPEN/CLOSE to close the tray. READING appears on the TV screen, and starts automatically. If playback press PLAY. In some cases, the disc menu disc has Press DISPLAY when playback Moving DVD appear When instead. The is or displayed may be displayed first after Video CD which contains a menu. loading a DVD Use the 1 2 you want to 3 4 buttons to select the title/chapter view, then press SELECT/ENTER to start playback. Press TITLE or MENU to return to the a title on a more menu screen. Use the number buttons to select the track you want to view. setting as one menu screen. chapter or a to another operating procedures for two-digit numbers, press the buttons in rapid succession. Slow Motion 1 Press SLOW t menu setup. See page The player DVD T or VCD2.0 VCD1.1 during playback. will enter SLOW mode. or T to select the t If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be entered and/or the disc must be authorized -- one can move (0-9). 2 Use the SLOW t -- than follows: You also may set PBC to Off under 13. "Parental more track, you Note For Notes -- 1/3 disc has than may differ depending on the disc. Follow the instructions on the each menu screen. using the and the exact stopped, then (0-9) to press DISPLAY. Then, press 3/4 to select C (chapter) (or for a Video CD, select T for track). Then, enter the chapter/track number using the numbered buttons Menu is or > briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track. Press . twice briefly to step back to the previous chapter/track. To go directly to any chapter during DVD playback, VCD2.0 Press RETURN to return to the to can move Press SKIP/SCAN . menu screen DVD title, you playback 1/12 VCD1.1 disc has a menu screen one to another CHAPTER/TRACK chapter/track If than more follows: as press the appropriate numbered button select a title number. sure does not start, might a another title Control", DVDs may have a Your player will not different from your player is 4 (four). required speed: 1/16, t 1/8, t 1/4 or t 1/2 (backward), 1/16, T 1/8, T 1/4 or T 1/2 (forward). 3 To exit slow motion mode, press PLAY. or T (see page 14). region code. on play discs that have a region code player. The region code for this Note Slow motion playback in reverse is not applicable for Video CD. 15 OPERATION with DVD and Video CD Operation General Features Still Picture and VCD2.0 DVD 2 You can Search repeatedly VCD2.0 DVD 1 Press and hold SKIP/SCAN . during playback. now player will repeat The by press- on the TV currently playing, All icon appears Repeat 3 To exit The screen. press REPEAT a Repeat mode, screen. press REPEAT Off icon appears Repeat the TV on on the TV a third time. screen. Note VCD1.1 two seconds the disc press REPEAT. currently playing, icon appears second time. the remote control. The the track Repeat Track now on Repeat Track/All/Off - repeat The 2 To go into PAUSE mode. advance the picture frame-by-frame PAUSE ing Frame-by-frame playback during playback. will player 1 To VCD1.1 1 Press PAUSE The Video CDs (continued) On > for about or Video CD with a setup menu go into SEARCH mode. 2 Press and hold SKIP/SCAN . or > repeatedly required speed: mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, MX100 (forward). With a Video CD, the Search speed changes: mX2, mX4, mX8 (backward) or MX2, MX4, MX8 (forward). Repeat to use A-B PBC, you the must set PBC to Off Repeat VCD2.0 DVD the on function. See page 13. VCD1.1 to select the 3 To exit SEARCH mode, press PLAY. A* To AB repeat a sequence in A- appears 2 Press A-B begins (a-b VCD1.1 Karaoke DVD a title: 1 Press A-B at your chosen briefly the TV on starting point. screen. at your chosen end point. the TV screen, and the repeat sequence repeat appears on the player's display). again A-B appears Random OFF briefly on 3 To cancel the sequence, press A-B. 1 Press RANDOM The unit "RAND." during playback or in stop mode. automatically begins Random Playback and appears on the display window. 2 To return to normal "RAND." disappears playback, press RANDOM on the display window. until Time Search -:--:-- The Time Search function allows you to start any chosen time on the disc. 1 Press DISPLAY Tips By pressing SKIP/SCAN . or > during playback, the unit selects another title (track) resumes Random playback. 0:16:57 DVD play on appears the The Time Search box shows the and current disc. elapsed playing seconds, press 3/4 Search icon in the on-screen at dis- screen. Random 2 Within 10 The during playback. playing on-screen time of the to select the Time display. The "-:--:--" appears in the Time Search box. Note This function works with DVD Karaoke discs and only 3 Within 10 video CD without PBC. the seconds, required onds from left to Repeat CHAPT DVD VCD2.0 the number buttons to enter right hours, minutes, and sec- in the box. If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then enter the correct numbers. VCD1.1 ALL TRACK TITLE use start time. Enter OFF 4 Within 10 seconds, press SELECT/ENTER to confirm the start time. DVD Video Discs 1 To repeat the - Repeat Chapter/Title/Off currently playing chapter, Playback an press invalid starts from the selected time on the disc. If you enter time, playback will continue from the current point. REPEAT. The 2 To Repeat Chapter icon appears on the TV screen. repeat the title currently playing, press REPEAT second time. The Repeat Title 3 To exit The 3D Surround This unit icon appears Repeat mode, Repeat a on the TV press REPEAT Off icon appears on the TV screen. a third time. screen. can DVD produce a 3D SUR NORM. 3D Surround simulates multi-channel audio from two conventional stereo speakers, instead of the speakers normally required to listen to five more multi- channel audio from a home theater 2 To turn off the 3D Surround again to select "NORM". or system. 1 Press SOUND to select "3D SUR" 16 effect, which playback during playback. effect, press SOUND with DVD and Video CD Operation General Features Zoom VCD2.0 DVD VCD1.1 during playback or still playback discs: Menus to acti- vate the Zoom function. If you press ZOOM repeatedly, the increases up to six times. 2 Use the 1 2 zoomed 3 4 move Or, the through normal resume playback DVDs may contain menus that allow you to access special features. To use the disc menu, press MENU. Then, press the appropriate number button to select an option. or use the 1/2/3/4 buttons to return to paused image. DVD Title Menu 1 Press TITLE. If the current title has screen. Note The zoom The zoom function may not work for function may not work on some DVDs. 2 The 3 To VCD2.0 DVD a menu, the Otherwise, the disc list menu can and subtitle multi-angle scenes. Marker Search your selection, highlight then press SELECT/ENTER. picture. 3 Press CLEAR to the buttons to level magnification DVD the contents of DVD Video Checking The Zoom function allows you to enlarge the video image and to move through the enlarged image. 1 Press ZOOM DVD Features Special (continued) remove menu menu will appear the on may appear. angles, spoken language chapters for the title. camera options, and the title menu, press TITLE again. VCD1.1 DVD Disc Menu MARKER SEARCH 1/9 1 Press MENU. You can nine points To enter 1 start playback from a memorized point. Up to be memorized. can mark, follow these steps. a The disc 2 To During disc playback, press MARKER when playback reaches the spot that you want to Camera memorize. The Marker icon will appear 2 Repeat step on the TV 1 to enter up to nine Marker points on a 1 Marked Scene a disc During playback, The MARKER SEARCH 2 Within 10 to The number of the current menu will appear seconds, press 1/2 on to select recorded at different a different camera angle camera appears on the a display. a the screen. Marker Changing num- 1 the Audio Language DVD ENG D 6CH will start from the Marked remove scenes 1/1 press SEARCH. 3 Press SELECT/ENTER. 4 To DVD again. angles, you change angle during playback. Press ANGLE repeatedly during playback to select desired angle. ber that you want to recall. Playback Angle can disc. To Recall displayed. the disc menu, press MENU If the disc contains briefly. screen is menu remove Press AUDIO scene. the MARKER SEARCH menu, press ferent audio repeatedly during playback language or audio track. to hear dif- a SEARCH. Subtitles To clear 1 a During ENG disc playback, Press SUBTITLE press SEARCH. menu will appear on the different subtitle screen. repeatedly during playback languages. to see the Press 1/2 to select the Marker number that you want to 3 1 Marked Scene The MARKER SEARCH 2 DVD Note erase. If Press CLEAR. appears, the feature is not available on the disc. The Marker number will be erased from the list. 4 Repeat steps 2 and 3 to erase additional Marker numbers. 5 To remove the MARKER SEARCH menu, press SEARCH. 17 OPERATION with Audio CD and MP3 Discs Operation Playing The DVD Audio CD and MP3 discs an Player CD-ROM, CD-R, Before MP3 formatted recordings on read the notes recordings, on MP3 page 21. CD 1 Press and hold SKIP/SCAN . CD-RW discs. or MP3 playing Recordings on play can Search two seconds during playback. The now player will > for about or go into SEARCH mode. 2 Press and hold SKIP/SCAN . > or repeatedly to select the Insert 1 The a required speed: mX2, mX4, mX8 (backward) or MX2, MX4, MX8 (forward). disc and close the tray. appears on the TV screen. menu CD 3 Search MP3 Program Program TRACK 1 TRACK 1.MP3 TRACK 2 TRACK 2.MP3 TRACK 3 TRACK 3.MP3 TRACK 4 TRACK 4.MP3 TRACK 5 TRACK 5.MP3 TRACK 6 TRACK 6.MP3 speed and direction are indicated on the menu screen. 4 To exit SEARCH mode, press PLAY. TRACK 7.MP3 TRACK 7 Clear All TRACK 8 STER. 0:56:35 Audio CD Clear All TRACK 8.MP3 00:00 NORM. MP3 menu Random OFF 1 CD 1 Press RANDOM menu during playback or when playback is stopped. Press 3/4 to select 2 Playback During playback, To the current track's stop playback at any other and elapsed playing 2 To return to normal edly play time, press STOP. To 1 Press PAUSE during playback. playback, 1 press PLAY or press PAUSE again. to another Track Press SKIP/SCAN . or > window and Press SKIP/SCAN . twice In previous case or to return to the repeat a sequence. The -" Repeat of audio briefly step CD, using directly to any track, enter (0-9) MP3 repeat all tracks begins Repeat on a on the to menu screen. play repeatedly. icon and "OFF" appear This unit on the play, press menu screen. can menu screen. disc, press REPEAT a sec- CD produce a 3D Surround effect, which simulates multi-channel audio playback conventional stereo instead of the five speakers, speakers normally required channel audio from repeat the track currently playing, press REPEAT. icon appears the on back to the numbered buttons CD appears at your chosen end point. icon and "A B" appears on the menu screen, again 3D Surround to go Repeat Track/All/Off Repeat Track Repeat icon and "A 3 To exit the sequence and return to normal A-B again. more 2 To CD press A-B at your chosen start- The to during playback. The press RANDOM repeat"RAND." disappears on the dis- menu screen. A-B and the sequence track. the track number 1 To or During disc playback, ing point. The MP3 CD briefly during playback to go to the next track beginning of the current track. the Playback and display window playback, until RANDOM 2 Press A-B Moving the on MP3 CD 2 To return to Random "RAND." appears or menu screen. Repeat Pause automatically begins RANDOM time will appear on the display. Playback will stop at the end of the disc. 3 The unit track then press PLAY. a starts. a again or to listen to multi- home theater system. 1 Press SOUND to select "3D SUR" 2 To turn off the 3D Surround from two during playback. effect, press SOUND to select "NORM". ond time. The Repeat 3 To cancel The Repeat All icon appears Repeat mode, on the menu screen. press REPEAT Off icon appears on the a third time. menu screen. Changing the Audio Channel Press AUDIO repeatedly during playback to hear a (STEREO, LEFT, or RIGHT). ferent audio channel 18 CD dif- Programmed Playback Programmed Playback VCD2.0 MP3 CD with Audio CD Note Program allows you to store your favorite particular disc in the player memory. contain 32 tracks tracks for On a The 2 menu (Audio CD) or displayed on the TV 2 screen. during playback or in the Program Edit mode. mode to enter on menu to PBC, you the use must set PBC to Off on the function. See page 13. Program OPERATION Insert Video CD and close the tray. 1 is Video CD with 60 tracks Press PROGRAM Press PROGRAM while The VCD Program the stop menu is playback stopped. will appear. VCD Program E TRACK 1 E The a setup Insert the disc and close the tray. 1 with Video CD Programmed Playback and MP3 Discs Program can (MP3 disc). VCD1.1 mark will appear to the right of the word the right side of the menu screen. TRACK 2 Program TRACK 3 TRACK 4 TRACK 5 TRACK 6 TRACK 7 Clear All TRACK 8 Note Press PROGRAM to exit the mark will 3 E mode; the disappear. Note Press 3/4 to select track, then press SELECT/ENTER to place the selected track the 4 Edit Program Program to 3 place additional tracks on Program E MP3 TRACK 1.MP3 TRACK 8.MP3 TRACK 8 TRACK 2.MP3 TRACK 2.MP3 TRACK 3 TRACK 10 TRACK 3.MP3 TRACK 4.MP3 TRACK 4 TRACK 3 TRACK 4.MP3 TRACK 3.MP3 TRACK 5.MP3 TRACK 6 TRACK 6.MP3 TRACK 7 To E To NORM. Repeat Track The 00:00 1 5 MP3 menu track you selected last is highlighted on Press 3/4 to select the track you want to start 6 playing. move Press MENU to 7 move previous menu screen. list, press on the menu screen. press REPEAT Off icon appears on the a third time. menu screen. a Track from 1 Press PROGRAM mode to enter the E The Program List during playback or in Program Edit mode. the page. stop mark will appear. 2 Press 2 to move to the Program list. 3 Use 3/4 to select the track that you wish to from the Program list. to the next page. to the the on on menu the program list. Press TITLE to icon appears Repeat mode, Repeat Erasing programmed Tracks All icon appears Repeat OFF Press 2. The left. on the program second time. a To cancel The Audio CD steps 3-7 of "Programmed Playback with repeat all tracks Clear All TRACK 8.MP3 menu. repeat the track currently playing, press REPEAT. The TRACK 7.MP3 Clear All STER. Follow Audio CD and MP3 Disc" REPEAT TRACK 5 Program the Program TRACK 12 TRACK 2 0:56:35 PROGRAM to exit the Repeat Programmed TRACK 1 TRACK 8 or on list. Repeat step 3 Program list. CD Press RETURN a erase 4 Press CLEAR. Press PLAY to start. The track will be erased from the in the order in which you programmed the tracks and "PROG." appears on the menu screen. Program list. Playback begins Playback stops after have played once. all of the tracks on the Program list Erasing the 1 Follow steps List" as Complete Program 1-2 of "Erasing a List Track from Program above. 2 Use 3/4 to select "Clear All", then press SELECT/ENTER. The complete Program The programs To resume are for the disc will be erased. also cleared when the disc is removed. normal playback from programmed playback Press and hold PROGRAM for 3 seconds until "PROG." indicator disappears in the display window. 19 Additional Information Last Condition DVD This player Controlling Memory VCD1.1 CD Your remote control is memorizes the last condition for the last disc you have watched. Settings remain in memory even if you remove the disc from the player or switch off the If you load a disc that has its settings memothe latest stop position is automatically recalled. player. rized, player well as capable of your DVD operating limited functions of LG TV. operate for your LG TV. Before using the remote control, press the DVD TV button to select the device to be operated. 1 To switch the remote control mode Notes -- as Follow the instructions below to ferent -- the TV be device), sure (to operate to press the DVD or or a dif- TV but- ton first. Settings are stored in memory for use any time. This player does not memorize settings of a disc if you switch off the player before commencing to play 2 The POWER, CH(E/D), VOL (E/D), MUTE and TV AV buttons ate the it. on remote control are used to oper- LG TV. Screen Saver Setting The Remote Control Codes for LG TV appears when you leave the DVD Player in stop mode for about five minutes. After the Screen Saver has been engaged for about five This remote control minutes, the DVD Player will automatically Code 2 is for LG TV with PAL screen saver picture With certain ering or means Setting DVD VCD2.0 VCD1.1 discs, the playback picture may be flick- Dot Crawl is shown Vertical interpolation lines. That on straight or De-interlace is not perfectly matched with the disc. In this case, the picture quality may be improved by changing the video mode. To change the video about 3 seconds during The multi system. from the factory, the remote To set the remote control to Code 2, hold down both the TV button and "2" number button on the remote control. (If the batteries in the remote control are replaced while the remote control is set to Code 2, the setting will revert Code 1.) To set the remote control back to Code 1, hold down both the TV button and "1" number button on the remote control. video playback. displayed on the TV screen. Check whether the video quality has improved. If not, repeat the above procedure until picture quality is improved. new shipped or system. control is set to Code 1. mode, press and hold DISPLAY disc two remote control Code 1 is for LG TV with NTSC turn itself off. When the unit is Video Mode supports codes for LG TV: Code 1 and Code 2. mode number selected is Video mode change MODE1 → MODE2 MODE5 → MODE1 → sequence: MODE3 → MODE4 → If you turn off the the power, the video mode will be back to initial state (MODE1). 20 Note If the remote control does not TV, try one of the other code originally supplied Due to the variety COMPANY cannot will operate your particular or use the remote control with the LG TV. of codes used by manufacturer, OUR guarantee that the remote control operate every model of the LG TV. Additional Notes on Information(Continued) MP3 Discs About MP3 An MP3 file is audio data compressed by using MPEG1, layer-3 file-coding scheme. We call files that have the ".mp3" file extension "MP3 files". The player can not read an MP3 file that has a file extension other than ".mp3". The player can not read a fake MP3 file that has a file extension ".mp3". the audio MP3 Disc compatibility with this player ed as 1. 4. Sampling Frequency / only at 44.1kHz Bit rate/ within 32 320kbps CD-R physical format should be "ISO 9660" If you record MP3 files using the software which cannot create a FILE SYSTEM, for example "DirectCD" etc., it is impossible to playback MP3 files. We therefore recommend that you use "Easy-CD 5. A 2. 3. OPERATION is limit- follows: - Creator", which creates session disc single track. If there is no ISO9660 file an requires system. MP3 files in the first MP3 file in the 1st track, it cannot MP3 files. If you wish to playback MP3 format all the data in the disc or use a new playback files, one. 6. We do not recommend use 7. File and 8. using CD-RW discs. only. names should be named using 8 letters must incorporate the ".mp3" extension e.g. "********.MP3". Do not use special characters such ]:;\/.," 9. Please finished CD-R discs as or less "_?!><+*}{`[@ etc. Total number of files on the disc should be less than 200. 10. Use 74 minute CD-R discs minute CD-R This DVD (700M) (650M), do not use 80 software. player requires discs/recordings to meet certain technical standards in order to achieve playback quality. Pre-recorded DVDs set to these standards. There of recordable disc formats MP3 are are optimal automatically many different types CD-R containing (including files). Customers should also note that required permission is in order to download MP3 files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner. 21 Troubleshooting Check the following guide for the possible cause of a before problem Cause Symptom Correction No power. The power cord is disconnected. The power is on, but the DVD player does No disc is inserted. Plug the power securely. Insert a disc. cord into the wall outlet (Check that the DVD or, audio CD indicator in the window is not work. No service. contacting The TV is not set to receive DVD picture. signal output. Select the on the TV player The video cable is not connected display lit.) appropriate video input mode the picture from the DVD so the TV on appears Connect the video cable screen. securely. securely. No sound. The connected TV power is turned off. Turn The Select the correct equipment connected with the audio cable is not set to receive DVD signal output. The audio cables are not connected the TV. on audio receiver input mode of the you can listen to the sound from the DVD player. so Connect the audio cable securely. securely. The power of the equipment connected with the audio cable is turned off. The Digital Audio Output position. is set to the playback picture is The disc is the on equipment connected with the audio cable. Set the Digital Audio Output to the position, then turn on the DVD player again by pressing POWER. correct wrong The Turn Clean the disc. dirty. poor. The DVD not start player does playback. No disc is inserted. Insert a disc. (Check that the DVD, audio CD indicator in the DVD or display is lit.) An unplayable disc is inserted. Insert a playable disc. (Check the disc type, color system, and Regional code.) The disc is down. placed upside Place the disc with the playback side down. The disc is not placed within the guide. Place the disc inside the The disc is dirty. The level is set. Rating The remote control is not does not work remote properly. sensor Cancel the pointed player. at the of the DVD player. There is an obstacle in the rating tray correctly path of the player. Rating function or change level. Point the remote control at the remote sensor The remote control is too far from the DVD the disc Clean the disc. the The remote control on guide. of the DVD Operate (7 m). player. the remote control within 23 ft Remove the obstacle. remote control and the DVD The batteries in the remote control exhausted. 22 are Replace the batteries with new ones. Speaker Settings Make the following settings for the built-in 5.1 channel Delay surround decoder. Press 1 / 2 to customize the sound to confirm to the acoustics of your room by adding a delay effect to the Center Speaker and Rear (Surround) Speakers. Disc Audio Disc Subtitle R R Disc Menu Rating Country TV Volume Code Aspect Menu When 5.1 Channel Surround is played, you can enjoy the best sound if the distance between you and each speaker is the same. You can set the Delay time in Front L 0dB Size Small Delay Language ms Test Digital 5.1 Audio Output the Center/Rear Return Others 1 Select "5.1 2 While "5.1 tons on (Surround) Speakers the sound to the acoustics of your Speaker Setup Speaker Setup" using the setup to customize room. the 3/4 but(A) L menu. R C Speaker Setup" is selected, press 2 DC DF button. SW Press 1/2 buttons to select the desired 3 options by using 4 Adjust Speaker Select speaker. DS SL 3/4/4/2 buttons. SR (B) selection speaker that you want to adjust. (Front speak(Left), Front speakers (Right), Center Speaker, Rear speakers (Left), Rear speakers (Right), or Subwoofer) a ers Note Certain speaker settings are prohibited by Digital licensing agreement. the Dolby Setting the delay (Center Speaker) equal to or longer than the DF the below figure, set the mode as 0ms. Otherwise, change the setting according to the table below. (A)=DF-DC Distance of (A)(cm) Setting(ms) If the distance of DC is Volume Press 1 / 2 to adjust the output speaker. (-10dB 0dB) level of the selected ~ Size Setting Press 1 / 2 to set a mode. (Large, Small or 1 68 2 102 3 136 4 170 5 the delay (Rear (Surround) Speaker) equal to the distance of DS in above, set the mode as 0ms. Otherwise, change the setting according to the table below. (B)=DF-DS Distance of (B)(cm) Setting(ms) If the distance of Df is None) If you have connected the system to a speaker with low frequency of 100Hz or below, select "Large." 34 a If you have connected the system to a speaker witha low frequency of 100Hz or below, select out 170 5 "Small." If you have not connected a subwoofer, always select "Large" for Front speaker (L/R). 340 10 510 15 When you do not have select "None." Front L/R speaker's a size certain Test can be set to If Front L/R size is set to Center can "Large" or "Small," be set to "Small" Rear and or "None." Press SELECT/ENTER to test the signals of each speaker. Adjust the volume to match the volume of signals memorized in the system. Front Left (L) Front Right (R) Center Rear Left (L) Rear Right (R) → → Subwoofer's size can the speaker connected, "Small." speaker's speaker's size in be set only to "Large" or "None. test → → Return Press SELECT/ENTER to return to the previous menu. 23 REF NC Language Code Enter the (See appropriate 12). List code number for the initial settings "Disc Audio", "Disc Subtitle" and/or "Disc Menu" page Code Language Code Language Code Language Code Language 6566 Abkhazian 7074 Fiji 7678 Lingala 8373 Singhalese 6565 Afar 7073 Finnish 7684 Lithuanian 8375 Slovak 6570 Afrikaans 7082 French 7775 Macedonian 8376 Slovenian 8381 Albanian 7089 Frisian 7771 Malagasy 8379 Somali 6577 Ameharic 7176 Galician 7783 Malay 6983 Spanish 6582 Arabic 7565 Georgian 7776 Malayalam 8385 Sudanese 7289 Armenian 6869 German 7784 Maltese 8387 Swahili 6583 Assamese 6976 Greek 7773 Maori 8386 Swedish 6588 Aymara 7576 Greenlandic 7782 Marathi 8476 Tagalog 6590 Azerbaijani 7178 Guarani 7779 Moldavian 8471 Tajik 6665 Bashkir 7185 Gujarati 7778 Mongolian 8465 Tamil 6985 Basque 7265 Hausa 7865 Nauru 8484 Tatar 6678 Bengali; Bangla 7387 Hebrew 7869 Nepali 8469 Telugu 6890 Bhutani 7273 Hindi 7879 Norwegian 8472 Thai 6672 Bihari 7285 Hungarian 7982 Oriya 6679 Tibetan 6682 Breton 7383 Icelandic 8065 Panjabi 8473 Tigrinya 6671 Bulgarian 7378 Indonesian 8083 Pashto, Pushto 8479 Tonga 7789 Burmese 7365 Interlingua 7065 Persian 8482 Turkish 6669 Byelorussian 7165 Irish 8076 Polish 8475 Turkmen 7577 Cambodian 7384 Italian 8084 Portuguese 8487 Twi 6765 Catalan 7465 Japanese 8185 Quechua 8575 Ukrainian 9072 Chinese 7487 Javanese 8277 Rhaeto-Romance 8582 Urdu 6779 Corsican 7578 Kannada 8279 Rumanian 8590 Uzbek 7282 Croatian 7583 Kashmiri 8285 Russian 8673 Vietnamese 6783 Czech 7575 Kazakh 8377 Samoan 8679 Volapuk 6865 Danish 7589 Kirghiz 8365 Sanskrit 6789 Welsh 7876 Dutch 7579 Korean 7168 Scots Gaelic 8779 Wolof 6978 English 7585 Kurdish 8382 Serbian 8872 Xhosa 6979 Esperanto 7679 Laothian 8372 Serbo-Croatian 7473 Yiddish 6984 Estonian 7665 Latin 8378 Shona 8979 Yoruba 7079 Faroese 7686 Latvian, Lettish 8368 Sindhi 9085 Zulu 24 Country Code Enter the appropriate List code number for the initial setting "Country Code" (See page 14). Code Country Code Country Code Country Code Country AD Andorra ER Eritrea LC Saint Lucia SC Seychelles AE United Arab Emirates ES LI Liechtenstein SD Sudan AF Afghanistan ET Spain Ethiopia LK Sri Lanka SE Sweden AG FI Finland LR Liberia SG Singapore AI Antigua and Anguilla FJ Fiji LS Lesotho SH Saint Helena AL Albania FK Falkland Islands LT Lithuania SI Slovenia AM Armenia FM Micronesia LU Luxembourg SJ Svalbard and Jan AN Netherlands Antilles FO Faroe Islands LV Latvia AO Angola FR France LY Libya SK Slovak AQ Antarctica FX France MA Morocco SL Sierra Leone AR Argentina Territory) MC Monaco SM San Marino AS American Samoa GA Gabon MD Moldavia SN Senegal AT Austria GB Great Britain MG Madagascar SO Somalia AU Australia GD Grenada MH Marshall Islands SR Suriname AW Aruba GE Georgia MK Macedonia ST Saint Tome and AZ GF French ML Mali SU Former USSR BA Azerbaidjan Bosnia-Herzegovina GH Ghana MM Myanmar SV El Salvador BB Barbados GI Gibraltar MN Mongolia SY Syria BD Bangladesh GL Greenland MO Macau SZ Swaziland BE Belgium GM Gambia MP Northern Mariana Islands TC Turks and Caicos Islands BF Burkina Faso GN Guinea MQ Martinique (French) TD Chad BG Bulgaria GP Guadeloupe (French) MR Mauritania TF BH Bahrain GQ Equatorial MS Montserrat BI Burundi GR Greece MT Malta TG Togo BJ Benin GS S. MU Mauritius TH Thailand BM Bermuda Isls. MV Maldives TJ Tadjikistan BN Brunei Darussalam GT Guatemala MW Malawi TK Tokelau BO Bolivia GU Guam MX Mexico TM Turkmenistan BR Brazil GW Guinea Bissau MY Malaysia TN Tunisia BS Bahamas GY MZ Mozambique TO Tonga BT Bhutan HK Guyana Hong Kong NA Namibia TP East Timor BV Bouvet Island HM Heard and McDonald NC New Caledonia TR Turkey BW Botswana Islands NE Niger TT Trinidad and BY Belarus HN Honduras NF Norfolk Island TV Tuvalu Barbuda (European Guyana Guinea Georgia & S. Sandwich (USA) Republic French Southern (French) Tobago BZ Belize HR Croatia NG Taiwan HT Haiti NI Nigeria Nicaragua TW Canada TZ Tanzania CC Cocos HU Hungary NL Netherlands UA Ukraine ID Indonesia NO IE Ireland NP Norway Nepal UG CG (Keeling) Islands Central African Republic Congo UK Uganda United Kingdom CH Switzerland IL Israel NR Nauru UM USA Minor CI Ivory Coast IN India NU Niue CK Cook Islands CL Chile CM Cameroon CN Outlying Islands British Indian Ocean NZ New Zealand US United States Territory OM Oman UY Uruguay IQ Iraq PA Panama UZ Uzbekistan China IR Iran PE Peru VA Vatican CO Colombia IS Iceland PF Polynesia (French) VC Saint Vincent & CR Costa Rica IT Italy PG CS Former Czechoslovakia JM Jamaica PH Papua New Philippines VE Venezuela CU Cuba JO Jordan PK Pakistan VG CV Cape Verde JP PL Poland VI Virgin Virgin CX Christmas Island KE Japan Kenya PM Saint Pierre and VN Vietnam CY Cyprus KG Kyrgyzstan PN Pitcairn Island VU Vanuatu CZ Czech KH Cambodia6 PR Puerto Rico WF Wallis and Futuna Islands DE Germany Djibouti KI Kiribati PT Portugal WS Samoa DJ KM Comoros PW Palau YE Yemen DK Denmark KN Saint Kitts & Nevis PY Paraguay YT DM Dominica KP North Korea QA Qatar YU Mayotte Yugoslavia Republic IO Principe Territories CA CF Mayen Islands Anguilla Guinea Miquelon City Grenadines Islands Islands DO Dominican KR South Korea RE Reunion ZA South Africa DZ Algeria KW Kuwait RO Romania ZM Zambia EC Ecuador KY Cayman RU Russian Federation ZR Zaire EE Estonia KZ Kazakhstan RW Rwanda ZW Zimbabwe EG Egypt LA Laos SA Saudi Arabia EH Western Sahara LB Lebanon SB Solomon Islands Republic Islands (French) State (British) (USA) 25 REF NC Specifications General Power Power requirements AC 110-240V consumption 14W Dimensions Mass (approx.) , 50/60 Hz 430X76.5X242mm(wxhxd) 2.8 (approx.) kg Operating temperature 5˚C to 40˚C Operating humidity 5%to90% (41˚F to 104˚F) System Laser Semiconductor laser, wavelength 650 Signal system PAL/NTSC Frequency DVD(PCM96kHz):8Hzto44kHz DVD(PCM48kHz):8Hzto22kHz response nm CD:8Hzto20kHz ratio Signal-to-noise More than 100dB (ANALOG Harmonic distortion Less than 0.008% Dynamic More than 100 dB range More than 95 dB OUT connectors only) (DVD) (CD) Outputs VIDEO OUT 1 S-VIDEO OUT (Y) (C) COMPONENT VIDEO OUT Vp-p 75 1.0 V ohms, sync negative (p-p), 75 Ω, negative (p-p) 75 ohms 0.3 V sync, Mini DIN (Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2 4-pin x output (digital audio) 0.5V(p-p),75Ω,RCAjackx1 Audio output (optical audio) 5 V Audio output (analog audio) 2.0Vrms(1KHz,0dB),330Ω,RCAjack(L,R)x1 75 Ω, Optical connector x 1 1 Audio (p-p), x 1 Accessory S-Videocable.....................1 Videocable.......................1 Audiocable.......................1 Remotecontrol....................1 Batteries.........................2 Design and specifications are subject to change without notice. Manufactured under license from Confidential unpublished DTS and DTS 26 Digital Out works. are Dolby Laboratories. Dolby and the double-D symbol are trademarks Copyright 1992-1997 Dolby Laboratories. All rights reserved. trademarks of Digital Theater Systems, Inc. of Dolby Laboratories. P/NO : 3834RS0032R ">

Public link updated
The public link to your chat has been updated.
Advertisement