advertisement
▼
Scroll to page 2
of 27
DVD PLAYER OWNER'S MANUAL MODEL : DV7821P Before connecting, operating please read this instruction booklet or adjusting this product, carefully and completely. Safety Precautions CAUTION NOTES ON COPYRIGHTS: It is forbidden RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash equilateral triangle with arrowhead symbol is intended to alert the within user an to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute by law to copy, broadcast, show, broadcast play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs on a VCR, picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. via cable, a risk of electric shock to persons. SERIAL NUMBER: The serial number is found The exclamation point within is intended to alert the important operating user an equilateral triangle to the presence of and maintenance (servicing) accompanying the instructions in the literature product. SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this such as a book case or equipment in confined space a similar unit. CLASS 1 KLASSE 1 LASER PRODUCT LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT CLASSE 1 PRODUIT LASER CAUTION: This To Digital ensure manual Video Disc proper carefully use Player employs of this a Laser product, please System. read this owner's and retain for future reference should the unit require maintenance, contact (see service procedure). an Use of or controls, adjustments, dures other than those specified authorized service location the performance of proceherein may result in haz- ardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be 2 placed on the apparatus. the back of unique to this unit and not available others. You should record requested information here and retain this guide as a permanent record of your purchase. Model No. Serial No. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC on this unit. This number is ___________________________________ ___________________________________ to Table of Contents Introduction SafetyPrecautions.........................2 TableofContents..........................3 BeforeUse..............................4-5 PlayableDiscs...........................4 Precautions.............................5 NotesonDiscs..........................5 AboutSymbols..........................5 .6 FrontPanelandDisplayWindow. . . . . . . . . . . . . RemoteControl............................7 RearPanel................................8 Preparation Connections............................9-10 ConnectingtoaTV.......................9 .10 ConnectingtoOptionalEquipment. BeforeOperation.......................11-14 GeneralExplanation......................11 On-ScreenDisplay.......................11 InitialSettings........................12-14 12 Initial Settings General Operation. Language..........................12 . . . . . . . . . . . . . . . . . Picture.............................12 Sound.............................13 Others.............................13 ParentalControl......................14 Operation with Audio CD and MP3/WMA Disc Playing an Audio CD and MP3/WMA Disc NotesonMP3/WMARecordings. . . . . . . 18-19 . . . . . . . . . 18 .18 Pause.............................19 MovingtoanotherTrack...............19 RepeatTrack/All/Off..................19 Search.............................19 Random...........................19 RepeatA-B.........................19 3DSurround........................19 .19 ChangingtheAudioChannel. OperationwithJPEGDisc...................20 ViewingaJPEGdisc.....................20 MovingtoanotherFile.................20 . . . . . . . . . . StillPicture.........................20 Toflipthepicture.....................20 Torotatepicture......................20 .20 NotesonJPEGRecordings. ProgrammedPlayback.....................21 Programmed Playback with Audio CD and . . . . . . . . . . . MP3/WMADisc.........................21 ProgrammedPlaybackwithVideoCD. RepeatProgrammedTracks ErasingaTrackfromProgramList. ErasingtheCompleteProgramList. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 .21 .21 .21 AdditionalInformation.....................22 LastConditionMemory...................22 ScreenSaver...........................22 Operation .15-17 OperationwithDVDandVideoCD. PlayingaDVDandVideoCD...............15 . . . . . . . GeneralFeatures........................15 MovingtoanotherTITLE...............15 15 Moving to another CHAPTER/TRACK . . . . . Search.............................15 Still Picture and Frame-by-Frame Playback . 16 SystemSelect..........................22 ControllingtheTV.......................22 Reference Troubleshooting..........................23 LanguageCodeList.......................24 CountryCodeList.........................25 Specifications............................26 SlowMotion.........................16 Random...........................16 Repeat............................16 RepeatA-B.........................16 About the symbols TimeSearch........................16 Indicates hazards 3DSurround........................16 itself or for instructions likely to cause damage. harm to the unit other material Zoom..............................17 MarkerSearch.......................17 SpecialDVDFeatures....................17 TitleMenu..........................17 Indicates special operating Indicates tips and hints for features of this unit. making the task easier. DiscMenu..........................17 CameraAngle.......................17 .17 ChangingtheAudioLanguage. .17 ChangingtheAudioChannel. . . . . . . . . . . . . . . . . . . . Subtitles...........................17 3 INTRODUC Before Use Playable Disc-related terms Discs Title The main film content (8cm/12cmdisc) or (VCD) (8cm/12cmdisc) you to locate it Audio CD (8cm/12cmdisc) In addition, this unit can play a DVD-R, DVD±RW, CD, SVCD, and CD-R or CD-RW that contains audio titles, MP3, WMA or JPEG files. Kodak PICTURE Depending ment some or played -- -- the conditions of the recording equip(or DVD-R/±RW) disc itself, (or DVD-R/±RW) discs cannot be the CD-R/RW CD-R/RW or irregularly shaped octagonal). It may result in use Notes Some on CDs (the (e.g., heart-shaped malfunctions. DVDs and Video CDs playback operations (Video Sections of a CD and audio CD picture or a audio CD. Each track is or an enabling only) piece assigned musical on a a video CD track number, you to locate the track you want. Scene On video CD with PBC (Playback control) functions, pictures are divided into sections called "Scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling a moving pictures and still you to locate the scene you want. A scene is composed of one or several tracks. of DVDs and Video CDs may be intentionally fixed by software manufacturers. As this unit plays DVDs and Video CDs according to designed by the software manufacturer, playback features of the unit may not be available Types There of video CDs are two disc content some enabling easily. the unit. on Do not attach any seal or label to either side labeled side or the recorded side) of a disc. Do not feature content Chapter (DVD only) Sections of a picture or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters may not be recorded. Track Notes on accompanying or additional feature content, or music album. Each title is assigned a title reference number Video CD -- (DVD only) DVD types of video CDs: equipped with PBC (Version 2.0) (Playback control) functions allow you to interact Video CDs PBC other functions may be added. Refer also to the instructions supplied with the DVDs with the and Video CDs. Some DVDs made for business purposes may not be played on the unit. typical computer-like operations. Moreover, of high resolution can be played if they are or system via menus, search functions, or still other pictures included in the disc. code of the DVD player and DVDs player is designed and manufactured 4 for playback of region "4" encoded DVD software. The region code on the labels of some DVD discs indicates which type of player can play those discs. This unit can play only DVD discs labeled "4" or "ALL". If you try to play any other discs, the message "Check Regional Regional This DVD Code" will appear on the TV screen. Some DVD discs may not have a region code label even though their playback 4 is prohibited by area limits. Video CDs not equipped with PBC (Version 1.1) Operated way as audio CDs, these discs allow playback of video pictures as well as sound, but they are not equipped with PBC. in the same Before Use (Continued) After the unit Handling discs Storing Precautions playing, store the disc in its case. When Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sun- The light, shipping the unit original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio during playback. In this case, position may be distorted the unit away from the TV, VCR, unit after removing the disc. To keep Do not near or radio, turn off the or volatile such liquids, as the unit. Do not leave rubber leave marks on a long period ter out. plastic products in of time. They will the surface. soft, dry cloth. If the surfaces soft cloth use thinner, or are moistened with lightly solution. Do not benzine, Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the centure insecticide spray, or To clean the cabinet a discs the unit Cleaning use a Cleaning temperature the exterior surfaces clean use contact with the unit for Use as there may be a considerable increase inside the car. strong as a extremely dirty, detergent mild solvents such these as might damage alcohol, the surface Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older About records. vinyl Symbols of the unit. About the To obtain clear picture The DVD player is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer. a " may appear on the TV This icon means the function manual is not available About the disc on Discs DVD VCD2.0 Handling Hold the disc on playback side of the disc. by the edges so that fingerprints the surface. Do not stick paper during operation. explained in this owner's that specific DVD video disc. symbols screen for instructions of the following symbol is represented by the symbol. one to the disc DVD Video CDs with the PBC (playback control) function. discs VCD1.1 Do not touch the get on A section whose title has applicable only Notes symbol display " or tape on the disc. Video CDs without the PBC (playback control) function. will not CD Audio CDs. MP3 MP3 disc. WMA WMA disc. JPEG JPEG disc. 5 INTRODUC Front Panel and Display Window PLAY(2) playback. Starts PAUSE(;) Pause playback temporarily/ press repeatedly for frame-by-frame playback. STOP(9) Stops playback. Skip/Scan ( Q / S ) beginning of current chapter/track PREVIOUS chapter/track. Reverse Go to Press and hold for two seconds for POWER Switches the player Forward ON and OFF. fast a Skip/Scan ( T / chapter/track. R or to reverse search. ) Go to NEXT Power indicator Press and hold for two seconds for Lights green when the DVD player is turned on. a fast forward search. OPEN/CLOSE Opens Disc Insert a Tray or ( / ) closes the disc Display tray. window Shows the current status of the disc here. player. Remote Sensor ANGLE active TITLE Indicates current title number CHP/TRK DVD Indicates current chapter or track number DVD inserted Indicates total CD Audio CD inserted playing time/elapsed time VCD Video CD inserted MP3 MP3 or PROG. WMA disc Programmed playback active inserted RANDOM RANDOM playback active Indicates current player function: Playback, Pause, Indicates MP3 VCD 6 mode etc. CD DVD TITLE CHP/TRK PROG. RANDOM ALL AB repeat Remote Control POWER Switches DVD Player OPEN/CLOSE ON and OFF. Selects 3D SURROUND disc during playback. TV POWER Turns off TV sound. - operational Selects OPEN/CLOSE SOUND/MUTE - control to DVD. DISPLAY PR./CH DISPLAY 2 - Selects - an item in the VOL ENTER TITLE SLOW menu on a SKIP/SCAN PLAY SKIP/SCAN ( ) CLEAR ? AUDIO SUBTITLE ANGLE SETUP SLOW(, /.)? playback. REPEAT Reverse/ Forward slow A-B RANDOM ZOOM ? * SUBTITLE Selects a a subtitle DVD Reverse SKIP/SCAN angle setup MARKER SEARCH ? if ? ? menu. ? remote ? track number on menu. ? sensor and About 30° in each direction of the front of the all. sequence. RANDOM tracks in random order. ZOOM battery video image. installation Detach the battery the remote control, and insert AAA AAA cover on (size AAA) batteries aligned correctly. from the front of the the A-B Plays ? sensor. sensor. or REPEAT Repeat ? Operation Range (7 m) a Repeat chapter, track, title, Remote control Angle: track. CLEAR ? Point the remote control at the remote ) Press and hold button for about Enlarges remote or ANGLE SEARCH press the buttons. Distance: About 23 ft S Enters to the program edit mode exits from that. point during playback. Remote Control ( program list or a mark on the MARKER SEARCH menu. MARKER Displays PLAY(H) playback. Removes SETUP Marks any ) chapter language. camera or removes T PROGRAM ? available Accesses ( two seconds. a menu. language (DVD) or audio channel (CD). Selects Forward SKIP/SCAN previous chapter audio an selection. Search backward*/ go to beginning of current chapter or track or go to 0-9 number buttons AUDIO of TV. Starts MARKER SEARCH STOP(9)? Stops playback. an menu Search forward*/ go to next or track. ? playback temporarily/ press repeatedly for frame-by-frame playback. Selects input channel PROGRAM Pauses Selects numbered items in video CD the discs Title menu, if Displays ? PAUSE/STEP a available. DVD disc. ; menu. of TITLE volume of TV. MENU Accesses Selects AUX A/V Acknowledges STOP Selects channel of TV and changes setup menu SELECT/ENTER PR./CH menu. PAUSE/STEP the Displays with PBC. TV AV - VOL MENU (left/right/up/down) 4 3 SELECT display. Removes the RETURN - 1 mode of RETURN/TV AV mode of remote Accesses On-Screen operational remote control to TV. DVD Selects tray. This button is not available. SOUND/MUTE - and closes the disc Opens with the rear of two R03 and Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). 7 INTRODUC Rear Panel COAXIAL Connect to (Digital audio out jack) digital (coaxial) audio equipment. AUDIO OUT Connect to or stereo (Left/Right) amplifier, receiver, an system. VIDEO OUT Connect to a TV with video inputs. COMPONENT SCAN VIDEO OUT Connect to a TV with Y Pb Pr (Y inputs. Pb Pr) S-VIDEO OUT Connect to OPTICAL a TV with S-Video inputs. (Digital audio out jack) digital (optical) audio equipment. Connect to AC Power Cord Plug Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. 8 into the power source. Connections Tips Depending Rear of TV your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections on COMPONENT VIDEO INPUT Pr Pb S-VIDEO INPUT Y AUDIO INPUT R VIDEO INPUT L described below. PREATION Please refer to the manuals of your TV, VCR, Stereo or other devices as necessary to make the System best connections. For better sound the AUDIO OUT of your reproduction, connect jacks to the audio in jacks player's amplifier, receiver, stereo or audio/video equipment. See "Connecting to Optional Equipment" on page 10. C S AV Caution -- Make directly to the input channel. Do not connect the DVD Player's AUDIO OUT jack to the phono in jack (record deck) of your audio system. Do not connect your DVD Player via your VCR. The DVD image could be distorted by the copy protection sure the DVD Player is connected TV. Tune the TV to the correct video -- -- system. to a TV Connecting Make the one of the capabilities following connections, depending existing equipment. on of your Rear of DVD player Video connection 1 2 Connect the VIDEO OUT the video in jack on jack on the DVD Player to using the video cable (V). the TV Connect the Left and Right AUDIO OUT jacks of Player to the audio left/right in jacks on (A) using the audio cables. the DVD TV the S-Video connection 1 Connect the S-VIDEO OUT to the S-Video in cable 2 on the DVD using Player the S-Video (S). Connect the Left and Right AUDIO OUT jacks of Player to the audio left/right in jacks on (A) using the audio cables. Component 2 jack the TV the DVD TV 1 jack on Video (Color Stream ) the connection Connect the COMPONENT VIDEO OUT the DVD to the the TV Y Pb Player using an corresponding Pr cable (C). in jacks on jacks on Connect the Left and Right AUDIO OUT jacks of Player to the audio left/right in jacks on (A) using the audio cables. the DVD TV the 9 Connections Connecting (Continued) Optional Equipment to Rear of DVD player Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/ Pro Logic Connect the Left and DVD Player to the amplifier, receiver, cables (A). Right AUDIO OUT jacks on the right in jacks on your system, using the audio audio left and or stereo Connecting to an amplifier equipped with two digital stereo (PCM) or to an Audio/ Video receiver equipped with a multi-channel decoder (Dolby DigitalTM, MPEG 2, or DTS) channel 1 O one of the DVD Player's DIGITAL AUDIO jacks (OPTICAL O or COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (optical O or coaxial X) audio cable. OUT You will need to activate the Digital Audio Output" player's digital output. page 13). on Multi-channel sound A digital multi-channel sound quality. For this connection provides the best you need a multi-channel Audio/Video receiver that supports one or more of the audio formats supported by your DVD Player (MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver. Caution: Due to the DTS will be in DTS Licensing agreement, the digital output digital out when DTS audio stream is selected. Notes If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. -- Six Channel Digital Surround Sound via digital cononly be obtained if your receiver is equipped with a Digital Multi-channel decoder. nection -- A Connect 2 (See "Digital -- X To see screen 10 can the audio format of the current DVD in the display, press AUDIO. on- OPTICAL COAXIAL DIGITAL INPUT Amplifier (Receiver) R L AUDIO INPUT Before Operation Caution: Before using the remote control, press the DVD button to select the device to be General or TV gives DVD Some DVDs numbers General screen. playback Temporary 2 TITLE can be of an Repeat For some Track Repeat All Tracks Repeat A-B Repeat Off OFF Resume be setting functions, setting. Title Repeat AB item. Feedback Field Icons Repeat Chapter Action display operation Press DISPLAY setting be also be used for number). TRACK displayed on the TV changed on the menu. can title CHAPT ALL Display Some items On-screen 1 basic instructions for status (e.g., can press SELECT/ENTER to execute the operating the Player. require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the DVD Player or is not available on the disc. On-Screen the change The number buttons operated. Explanation This manual Press 1/2 to 3 play (non-PBC (non-PBC from this prohibited Video CDs or only) Video CDs only) point not available Notes Some discs may not provide all of the features on the display example shown below. If no button is pressed for 10 seconds, the on-screen display disappears. during playback. on-screen Press 3/4 to select an The selected item will be item. highlighted. DVD Items Title Number 1/3 Chapter Number 1 /12 Time search 0:20:09 Audio 1 ENG language Digital Audio Output mode and Subtitle language Angle Sound VCD2.0 D 5.1 CH ABC Shows the current title number and total number of to the desired title number. 1/2,or Numbers, SELECT/ENTER titles, and skips Shows the current chapters, and skips chapter number and total number to the desired chapter number. Shows the elapsed playing time, and searches the point by the elapsed time directly. Shows the current audio soundtrack language, encoding method, and channel number, and changes the setting. 1/2,or Numbers, SELECT/ENTER Numbers, SELECT/ENTER 1/2,or AUDIO Shows the current subtitles changes the setting. 1/1 Shows the current angle number and total number of angles, and changes the angle number. 1/2,or Shows the current sound changes the setting. 1/2,or NORM. language, and of OFF mode, 1/2,or SUBTITLE and ANGLE SOUND VCD1.1 Items Function (Press 3/4 to select desired item) Track Number 1/4 Time 0:20:09 Audio Channel STER. Sound Selection Method Function (Press 3/4 to select desired item) NORM. Shows the current track number, total number of tracks and PBC On mode, and skip to the desired track number. Shows the elapsed playing time (Display only) Shows the audio channel, and changes the audio channel. Shows the current sound changes the setting. mode, and Selection Method 1/2,or Numbers, SELECT/ENTER -- 1/2,or AUDIO 1/2,or SOUND 11 PREATION Before Initial You Operation (Continued) set your can Menu Settings Select Personal Preferences own on the player. Initial General Settings you Language a see Operation Press SETUP. 1 The setup for the language appears. English Disc Subtitle Spanish Disc Menu French Rating German TV Original Disc Subtitle English Disc Menu French Rating German Country TV menu Italian Code Language Digital Audio Output Others Spanish Code Italian Aspect Menu This is the Aspect Menu Disc Audio menu. Disc Audio Country menu setup when you press SETUP. Chinese Language Picture Polish Digital Audio Hungarian Output Other-------- TV Aspect DVD 4:3 Letterbox: Select when Others nected. Displays above and below the The 4:3 Panscan: Select when screen selected will show the current item, as well as setting for the alternate setting(s). While the desired item is selected, press 2, then 3/4 to select the desired setting. 3 4 require SETUP, RETURN, 5 setup Press SELECT/ENTER to confirm your selection. Some items additional steps. Press or PLAY to exit the menu. Disc Scan style picture are is played off). Letterbox 4:3 Panscan Disc Menu 16:9 Wide : : The To select another code, press CLEAR. Original Disc Audio English Disc Subtitle Disc Menu French Rating German Country TV Code Menu Spanish Italian Aspect Language Chinese Polish Digital Audio Output Hungarian Other-------- Others 12 Code Aspect Language Others original language set for the disc is selected. language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 24. If you enter the wrong language Other sides of the 16:9 wide TV is connected. 4:3 Menu, Audio, and Subtitle. Original a Disc Subtitle Digital for the disc's style (Both Disc Audio Menu language a con- bars conventional TV set is back in that 16:9 Wide: Select when TV Language Select masking cut Rating DVD a with connected. The video material formatted in the Pan & Country Language standard 4:3 TV is images picture. Press 3/4 to select the desired item. 2 a theatrical Audio Output Before Operation (Continued) Sound Others Audio Digital Output Each DVD disc has The of audio variety output options. player's Digital Audio Output according to the Set the a type of audio system you DRC, Vocal, PBC and Auto Play settings Press 3/4 to select the desired item and press setting of the selected item is SELECT/ENTER. The use. changed DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM" between On and Off. if you connected the DVD Player's DIGITAL OUT jack to a Dolby Digital decoder (or an amplifier or other equip- Disc Audio DRC On Disc Subtitle Vocal On ment with Disc Menu PBC Rating Auto a Dolby Digital decoder). Stream/PCM: Select "Stream/PCM" if you connected the DVD Player's DIGITAL OUT jack to an amplifier or TV other Menu equipment decoder or with a DTS Country decoder, Dolby Digital On Play Off Code Aspect Language MPEG decoder. PCM: Select when connected to stereo be can changed. amplifier. The DVD a 2-channel player outputs Audio Digital digital sounds in the Output Others PCM 2ch format when you play a DVD video disc recorded on the Dolby Digital, MPEG1, or MPEG2 Dynamic Range Control (DRC) recording system. With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation Disc Audio DOLBY DIGITAL Disc Subtitle Stream/PCM Disc Menu PCM /PCM Rating Country TV Code Aspect Menu 48 KHz Language Digital Audio and the Sample Freq. 96KHz thanks to possible, digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds at a quietest ones). Then, you may losing clarity lower volume without listen to a movie of sound. Set DRC to On for this effect. Output Vocal Others Sample Frequency To Sample Frequency setting, first select Digital Audio Output as indicated as above. If your receiver or amplifier is NOT capable of handling 96KHz signals, select 48KHz. When this choice is made, this unit will automatically convert any 96KHz signals to 48KHz so your system can decode them. If your receiver or amplifier is capable of handling 96KHz signals, select 96KHz. When this choice is made, this unit will pass each type of signal through without any further processing. change the desired Set Vocal to On only DVD is The karaoke channels playing. when multi-channel karaoke a on the disc will mix into normal stereo sound. the PBC Set Playback Control (PBC) On: Video CDs with PBC are Off: Video CDs with PBC are to On or Off. played according to the PBC. played the same way as Audio CDs. Auto You Play can ically set up the DVD starts If Auto Play search a play DVD playing mode is set to title that back the title On: Auto Off: Auto Player Play Play so a DVD disc automat- whenever the DVD is inserted. On, this DVD player will playback time automatically. is long most and then function is activated. function is not activated. Note The Auto Play function may not work for some DVDs. 13 PREATION Before Operation (Continued) Parental Control Rating Movies DVDs may contain on scenes not suitable for Therefore, discs may contain Parental Control information that certain to the applies complete the disc. These scenes on disc are TV 7 Disc Menu 6 Country TV Code Menu 3 2 Language 1 Digital Audio Unlock Output Change Others 1 "Rating" on the Setup menu using the 3/4 buttons. 2 While 3 When you have not entered a password yet. Enter a 4-digit password using the numbered but- "Rating" tons to create a is selected, press 2. When you have already entered a password; Enter a 4-digit password using the numbered but- personal 4-digit security pass- word, then press SELECT/ENTER. If you make a mistake before pressing SELECT/ENTER, press CLEAR and enter 4-digit security password again. 4 1 Select 2 3 4 5 6 While Audio Output Code Country the setup step 3 of "Rating" Select the first character Shift the the 3/4 buttons cursor using 2 using second character on left. using the 3/4 buttons. button and select the 3/4 buttons. Press SELECT/ENTER to confirm your country code selection, then press SETUP to exit the Note Confirmation of the the code is 4-digit password changed (see "Changing is necessary when the 4-digit code" below.). Changing the 1 Follow 2 Enter the old 3 Select Steps 4-digit 1-2 code shown above to the left as Change using 3/4 buttons then press 4 Unlock: If you select 5 Enter exactly the same code a second fy by pressing SELECT/ENTER. 6 Press SETUP to exit the a Unlock, Parental Control is not active. The disc will Ratings play be 1 to 8: Some discs contain scenes not played. Higher unless an rated alternative scenes scene one. If no will not be is available The alternative must have the lower same on rating played 14 SETUP to exit the new 4-digit code, then press If you forget your 4-digit code If you word, follow the procedure below. play- your password, to clear the current pass- 1 Press SETUP to 2 Use the Number buttons to enter the display the setup menu. 6-digit number "210499". The 4-digit password is display for a moment. rating menu. forget time and veri- menu. the disc. suitable alternative is found, Press SELECT/ENTER to confirm your Enter the SELECT/ENTER. or a back will stop. You must enter the 4-digit password or change the rating level in order to play the disc. 5 selection, then press SELECT/ENTER. in full. suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will (Rating). code, then press SELECT/ENTER. rating from 1 to 8 using the 3/4 buttons. One (1) has the least playback restrictions. Eight (8) has the most playback restrictions. Select on Code is selected, press 2. Country Follow using menu. menu. personal 4-digit security password. then press SELECT/ENTER. Enter the 4-digit password again and press SELECT/ENTER to verify. tons to confirm the Code Others 4 Aspect US Language Digital 5 Rating Code Set Aspect Menu 8 Disc Subtitle List", page 25.). Rating Country you to prevent discs from being played by your children or to have certain discs played with alternative scenes. Disc Audio were to the list Disc Menu The Parental Control feature allows country-dependent. disc, referring Disc Subtitle rated whose standards country/area Code (See "Country to or scenes are a used to rate the DVD video Disc Audio from 1 to 8, and alternatively, more suitable scenes available for selection on some discs. Ratings are Select DVD Enter the code of DVD children. Code Country 3 Enter a new code as cleared. "P CLr" appears shown above to the left on the (Rating). Operation Playing with DVD and Video CD Playback Setup Turn on the 1 DVD VCD2.0 the TV and select the video nected to the DVD Audio source Note VCD1.1 input source con- on the audio system and select connected to the DVD player. Moving Press OPEN/CLOSE to open the disc tray. Load your 2 playback When chosen disc in the tray, with the starts automatically. If playback press PLAY. In some cases, the disc a menu Press might The is DVD displayed DVD or loading a want to title/chapter view, then press SELECT/ENTER to start you play- back. Press TITLE or MENU to return to the menu screen. VCD2.0 Use the number buttons to select the track you want Menu setting setup. See page If Parental Control is set and the disc is not within the the 4-digit code must be entered and/or the disc must be authorized "Parental -- Control", DVDs may have a Your player will not different from your player is 4 (four). (see num- title number. on a more 1/3 1 /12 disc has than as one more than track, you one chapter can move or a to another follows: press DISPLAY. Then, press 3/4 to select the chapter/track icon. Then, enter the chapter/track number using the numbered buttons (0-9). For two-digit numbers, press (0-9)in rapid succession. Search the numbered buttons DVD VCD2.0 VCD1.1 region two seconds during playback. The now player a region code code for this will or > for about go into SEARCH mode. 2 Press and hold SKIP/SCAN . or > repeatedly to select the required speed: mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, With discs that have The title MX100 page 14). region code. on play player. a 1 Press and hold SKIP/SCAN . Notes Rating settings (not authorized), to select menu screen. You also may set PBC to Off under 13. -- (0-9) Note operating procedures for depending on the disc. the menu may differ Follow the instructions on the each title, you to can move or > briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track. Press . twice briefly to step back to the previous chapter/track. To go directly to any chapter during DVD playback, menu screen. and the exact using one to another CHAPTER/TRACK chapter/track to view. Press RETURN to return to the a than Press SKIP/SCAN . DVD Use the 1 234 buttons to select the more VCD1.1 disc has may be displayed first after Video CD which offer a menu. DVD DISPLAY, then press the appropriate Moving appear menu screen use follows: as playback does not start, When a menu screen disc has bered button instead. If to another TITLE another title Press OPEN/CLOSE to close the tray. READING appears on the TV screen, and otherwise, all operations described 1/3 side down. 3 Unless stated the remote control. Some features may also be available on the Setup menu. player. system: Turn input General Features DVD and Video CD a (forward). CD, the Search speed changes: mX2, mX4, mX8, (backward) or MX2, MX4, MX8, a Video (forward). 3 To exit SEARCH mode, press PLAY. 15 OPERATION with DVD and Video CD Operation General Features Still Picture and VCD2.0 DVD 2 You can during playback. repeatedly on press REPEAT. currently playing, Track icon appears the disc repeat Repeat 3 To exit by the remote The on the TV screen. press REPEAT currently playing, All icon appears Repeat mode, Repeat con- trol. a the TV on screen. press REPEAT Off icon appears the TV on a third time. screen. Note On Slow Motion VCD2.0 DVD 1 Press SLOW t The Repeat The now PAUSE/STEP Track/All/Off Repeat the track second time. go into PAUSE mode. advance the picture frame-by-frame pressing - repeat The 2 To VCD1.1 will player 1 To Frame-by-frame playback 1 Press PAUSE/STEP The Video CDs (continued) T or VCD1.1 setup during playback. 2 Use the SLOW t or T to select the required speed: t 1/16, t 1/8, t 1/4 or t 1/2 (backward), T 1/16, T 1/8, T 1/4 or T 1/2 (forward). 3 To exit slow motion mode, press PLAY. to menu A* To reverse is not the on function. See page 13. VCD2.0 DVD AB repeat VCD1.1 OFF sequence in a " * A applicable for briefly appears 2 Press A-B in must set PBC to Off Repeat a title: 1 Press A-B at your chosen Note playback PBC, you the or " Slow motion use A-B Repeat will enter SLOW mode. player Video CD with a on starting point. the TV screen. at your chosen end again point. "A B" appears Video CD. briefly on the TV screen, and the repeat begins ("AsB" appears the display window). sequence 3 To cancel the sequence, press A-B. Random Karaoke DVD VCD2.0 VCD1.1 1 Press RANDOM during playback or in stop mode. The unit automatically begins Random Playback and "RANDOM" appears on the display window. 2 To return to normal "RANDOM" playback, press RANDOM disappears on the display window. until Time Search 0:20:09 DVD The Time Search function allows you to start any chosen time on the disc. 1 Press DISPLAY play appears on the SKIP/SCAN > during Random playback, (track) and resumes playback. 2 Within 10 This function works with DVD Karaoke discs and only video CD without PBC. OnaVideoCDwithPBC,youmustsetPBCtoOffon menu to use the Random function. See DVD VCD2.0 4 Within 10 invalid TRACK ALL Repeat Chapter the title icon appears on the TV sec- seconds, press SELECT/ENTER to confirm starts from the selected time Repeat currently playing, Title icon appears Repeat mode, Repeat on the disc. If you enter time, playback will continue from the current point. DVD VCD2.0 VCD1.1 3D SUR This unit press REPEAT on the TV screen. press REPEAT Off icon appears on the TV a third time. screen. can produce a 3D Surround simulates multi-channel audio screen. second time. 16 right hours, minutes, and in the box. Repeat Chapter/Title/Off - REPEAT. The the number buttons to enter OFF repeat the currently playing chapter, press 3 To exit to select the Time display. VCD1.1 NORM. DVD Video Discs The use start time. Enter 3D Surround TITLE repeat time of the If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then enter the correct numbers. Playback Repeat 2 To on-screen seconds, required onds from left to an The elapsed playing the start time. page 13. 1 To dis- The "-:--:--" appears in the Time Search box. the CHAPT on-screen at screen. seconds, press 3/4 Search icon in the 3 Within 10 Note setup playing current disc. the unit selects another title the The during playback. The Time Search box shows the Tips By pressing Random -:--:-- a effect, which playback from two conventional stereo speakers, instead of the speakers normally required to listen to five more multi- channel audio from a home theater system. 1 Press SOUND to select "3D SUR" 2 To turn off the 3D Surround again to select "NORM". or during playback. effect, press SOUND with DVD and Video CD Operation General Features Zoom VCD2.0 DVD during playback or still playback the repeatedly, discs: Menus to acti- level magnification steps. 2 Use the 1 234 buttons to move the zoomed through picture. 3 Press CLEAR to the normal resume playback or the contents of DVD Video Checking vate the Zoom function. If you press ZOOM increases up to six return to paused image. DVDs may offer menus that allow you to access special features. To use the disc menu, press MENU. Then, press the appropriate number button to select an option. Or, use the 1 234 buttons to highlight your selection, then press SELECT/ENTER. Title Menu DVD 1 Press TITLE. If the current title has screen. Note The function may not work for zoom some 2 The DVDs. VCD2.0 DVD menu, the list menu can menu menu will appear angles, spoken language chapters for the title. camera options, and the title menu, press TITLE remove the on may appear. again. VCD1.1 Disc Menu MARKER SEARCH 1/9 a Otherwise, the disc and subtitle 3 To Marker Search DVD VCD1.1 The Zoom function allows you to enlarge the video image and to move through the enlarged image. 1 Press ZOOM DVD Features Special (continued) DVD 1 Press MENU. You can nine points To enter 1 start playback from memorized a point. Up be memorized. can 2 To is menu displayed. the disc menu, press MENU remove again. mark, follow these steps. a During disc playback, press MARKER when playback reaches the spot that you want to Camera Repeat step on the TV briefly. screen 1 to enter up to nine Marker points on a disc. To Recall a Angle If the disc contains memorize. The Marker icon will appear 2 The disc to DVD scenes 1/1 recorded at different camera angles, you can change to a different camera angle during playback. Press ANGLE repeatedly during playback to select desired angle. The number of the current Marked Scene angle appears the on a display. 1 ENG 1 disc During playback, The MARKER SEARCH press SEARCH. menu will appear on 2 Within 10 seconds, press 1/2 to select number that you want to recall. a the screen. Marker will start from the Marked 4 To remove scene. the MARKER SEARCH menu, press SEARCH. To clear 1 a During playback, The MARKER SEARCH 2 3 repeatedly during playback language or audio track. D DVD 5.1 CH to hear Changing the Audio Channel Press AUDIO repeatedly during playback to hear (STER., LEFT or RIGHT). Subtitles press SEARCH. menu will appear on the screen. Press 1/2 to select the Marker number that you want to Language VCD2.0 a dif- VCD1.1 a dif- ferent audio channel Marked Scene disc the Audio Press AUDIO ferent audio 3 Press SELECT/ENTER. Playback Changing DVD ABC 1 ENG Press SUBTITLE different subtitle repeatedly during playback languages. to see the erase. Press CLEAR. Note The Marker number will be erased from the list. 4 Repeat steps 5 To 2 and 3 to erase If appears, the feature is not available on the disc. additional Marker numbers. remove the MARKER SEARCH menu, press SEARCH. 17 OPERATION with Audio CD and MP3/WMA Disc Operation Playing an Audio CD and MP3 CD The DVD ings Player can play or read the notes files that have on The on the TV on screen. player About the TV go to step 4. MP3/WMA disc; The MP3/WMA-JPEG choice screen not read Go to step 2 a MP3/WMA Disc limited Press 3/4 to select the MP3/WMA then press 2 SELECT/ENTER. 1. as appears on the TV screen. Press RETURN to move to the MP3/WMA-JPEG choice menu. 2. 3. Folder1 Folder2 Folder3 Folder4 Folder5 Folder6 Clear All 5. OFF 00:00 Media 3 4 Press 3/4 to select SELECT/ENTER. Playback starts. During playback, track then press PLAY A Creator", which single creates session disc track, it to elapsed playing menu. player playback File no MP3/WMA ISO9660 file an requires is system. MP3/WMA files in the MP3/WMA file in the 1st playback MP3/WMA files. If you wish files, format all the data in or use a new one. names should be named incorporate ".mp3" e.g. "********.MP3" the current track's or using or 8 letters or less ".wma" extension "********.WMA". 7. Donotusespecialletterssuchas"/:*?"<>"etc. 8. Total number of files on the disc should be less than 650. to the next page. move Press MENU to 6. cannot and must time will appear on the display window and Playback will stop at the end of the disc. Press TITLE to or with this compatibility follows: - the disc a offers double the audio the MP3 format. first track. If there is Press 3/4 to select a folder, and SELECT/ENTER. A list of files in the folder appears. Audio) compression - CD Folder7 Folder8 Microsoft audio - 4. Program file a Sampling Frequency / only at 44.1kHz (MP3), 44.1kHz (WMA) Bit rate / within 32 320kbps (MP3), 32 128kbps (WMA) CD-R physical format should be "ISO 9660" If you record MP3/WMA files using the software which cannot create a FILE SYSTEM, for example "Direct-CD" etc., it is impossible to playback MP3/WMA files. We recommend that you use "Easy22.05 menu MP3 file that has an ".mp3". WMA(Window Media Audio) technology. WMA(Windows compression of JPEG MP3 WMA can An WMA file is MP3 WMA The MP3/WMA Recordings compressed by using the layer-3 file-coding scheme. We call the ".mp3" file extension "MP3 files". extension other than Insert a disc and close the tray. Audio CD; Audio CD menu appears appears MP3/WMA MPEG1 audio CD-RW discs. playing MP3/WMA recordings, MP3/WMA Recordings on right. menu on An MP3 file is audio data MP3/WMA formatted record- Before 1 Notes About MP3 WMA CD-ROM, CD-R on MP3/WMA Disc move to the previous page. This DVD player requires discs/recordings to meet certain technical standards in order to achieve Program MP3 WMA Program CD TRACK01 TRACK02 TRACK 1.mp3 TRACK03 TRACK 2.mp3 TRACK 5.mp3 TRACK06 TRACK 6.mp3 TRACK07 TRACK 7.mp3 Clear All TRACK08 STER. NORM. Audio CD menu 0: 56: 18 Clear All TRACK 8.mp3 00:00 3 If you are use in a MP3/WMA menu file list and want to return to the Folder the 3/4 to highlight SELECT/ENTER to return to the 5 To 18 stop playback and press previous at any other optimal automatically many different types (including CD-R containing MP3 or WMA files). That require certain pre-existing conditions (see above) to insure compatible playback. OFF Tip list, are are of recordable disc formats TRACK 4.mp3 TRACK05 Pre-recorded DVDs set to these standards. There TRACK 3.mp3 TRACK04 playback quality. menu screen. time, press STOP. Customers should also note that required permission is in order to download MP3/WMA files and music from the Internet. Our company has no grant such permission. Permission should to always be sought from the copyright owner. right Operation Pause with Audio and MP3/WMA Disc MP3 CD 1 Press PAUSE/STEP WMA Repeat during playback. 2 To return to playback, PAUSE/STEP again. press PLAY or To 1 press repeat to another Track Press SKIP/SCAN . or > Press SKIP/SCAN . twice In previous case WMA briefly during step back to briefly of audio CD, to The directly to any track, enter the numbered buttons (0-9) to go using icon and "A Repeat " appears during playback. Repeat Track/All/Off 1 To MP3 WMA repeat the track currently playing, press REPEAT. The Repeat icon and "TRACK" appears the on begins to play repeatedly. Repeat icon and "OFF" appears 3D Surround This unit can menu repeat all tracks on a disc, press REPEAT produce a 3D Surround Repeat icon and "ALL" appears on the The Repeat mode, Repeat Search MP3 CD on two seconds during playback. The now will from two five more multi- channel audio from a home theater again or system. during playback. effect, press SOUND to select "NORM.". the third time. a menu screen. Press AUDIO the Audio Channel CD repeatedly during playback to hear a (STER., LEFT, or RIGHT). different audio channel WMA 1 Press and hold SKIP/SCAN . player effect, which menu screen. press REPEAT icon and "OFF" appears menu screen. speakers, instead of the speakers normally required to listen to Changing 3 To cancel press conventional stereo 2 To turn off the 3D Surround a sec- the playback 1 Press SOUND to select "3D SUR" ond time. The on play, CD screen. 2 To menu screen. icon and "A B" appears simulates multi-channel audio CD the on at your chosen end point. on the menu screen, again Repeat press A-B at your chosen start* 3 To exit the sequence and return to normal A-B again. track. the track number CD sequence. and the sequence to return to the or a 2 Press A-B The playback to go to the next track beginning of the current track. the MP3 CD A-B During disc playback, ing point. The Moving (Continued) > for about or go into SEARCH mode. 2 Press and hold SKIP/SCAN . or > repeatedly required speed: mX2, mX4, mX8 (backward) or MX2, MX4, MX8 (forward). to select the Search speed and direction are indicated on the menu screen. 3 To exit SEARCH Random mode, press PLAY. MP3 CD 1 Press RANDOM WMA during playback or when playback is stopped. The unit automatically begins RANDOM and or Random "RAND." appears on the Playback and display window menu screen. 2 To return to normal edly until RANDOM display window and press RANDOM repeat"RAND." disappears on the playback, or menu screen. 19 OPERATION Operation Viewing a with JPEG Disc JPEG disc Moving JPEG This DVD Player can play discs with JPEG files and Kodak picture CD. Before playing JPEG recordings, read the notes on JPEG Recordings on right. Insert 1 a menu appears > once or during viewing a previous file. to the Still Picture 1 Press PAUSE/STEP on or to advance to the next file picture disc and close the tray. The MP3/WMA-JPEG choice TV to another File Press SKIP/SCAN . the screen. The will during slide show. go into PAUSE mode. 2 To return to the slide show, press PLAY or press PAUSE/STEP again. player now MP3 WMA To JPEG 2 the flip picture Press 3/4 during showing a picture picture horizontally or a vertically. Press 3/4 to select the JPEG then press to flip the SELECT/ENTER. The JPEG menu appears on the TV To rotate screen. Press 1/2 JPEG Folder2 during showing clockwise picture Folder1 picture or a picture to rotate the counter clockwise. Folder3 Folder4 Folder5 Notes Folder6 Folder7 on JPEG Recordings Folder8 Slide Depending Off Speed upon the size and number of the JPEG a long time for the DVD player to files, it could take Press 3/4 to select and SELECT/ENTER. 3 A list of files in the folderfolder, appears. Press RETURN to choice a move to the MP3/WMA-JPEG menu. If you " are in a file list and want to return to the Folder the 34 buttons on the remote to --- reduce the resolution of the JPEG files pixels and burn another disc. on If you want to view a particular file, press 3/4 to highlight a file and press SELECT/ENTER or PLAY. that all the selected files have the Viewing the file proceeding starts. During viewing a file, press RETURN the previous menu (JPEG menu). rename Press MENU to JPEG move move to move to to the next page. to the previous page. Folder1 Picture1.jpg Picture2.jpg Picture3.jpg Picture4.jpg Picture5.jpg Picture6.jpg Picture7.jpg 5/32 1024X768 Slide Speed 5/32 Off 1024X768 Picture5.jpg Tip There are three viewing Slide Speed options: Fast, to highlight the Slide select the option you want to Normal, Slow, and Off. Press 1/2 Speed then press 3/4 to use, and press SELECT/ENTER. To stop viewing The JPEG 20 menu the disc should be less than 650. When you are using software such as Creator" to burn the jpeg files into the menu screen. Press TITLE to 5 big Some disc may be incompatible due to different recording format or condition of disc. highlight and press SELECT/ENTER to return to the previous 4 too Total number of files and folders use " are to less than 2 mega Tip list, read the disc's contents. If you don't see an ondisplay after several minutes, some of the files screen at any other appears. time, press STOP. when copying into the CD "Easy CD CD-R, ensure ".jpg" extensions layout. If the files have File them names be read shown by as ".jpe" or ".jpeg" extensions, please as ".jpg" files. without ".jpg" extension will not be able to player. Even though the files are image files in windows explorer. this DVD JPEG Programmed Playback Programmed Playback CD VCD2.0 with Audio CD function enables you to store your favorite tracks from any disc in the player memory. Program Program mode to enter the during playback or in Program Edit mode. the stop E The mark will appear to the right of the word the right side of the menu screen. on with Video CD Note On a setup Video CD with menu to PBC, you the use must set PBC to Off on the function. See page 13. Program contain 30 tracks. can Press PROGRAM 1 WMA Programmed Playback and MP3/WMA Disc The MP3 VCD1.1 Program OPERATION Insert Video CD and close the tray. 1 2 Press PROGRAM while The VCD Program menu is playback stopped. will appear. Program VCD E TRACK 1 TRACK 2 Note TRACK 3 Press PROGRAM to exit the Program Edit TRACK 4 mode; TRACK 5 TRACK 6 E the mark will disappear. TRACK 7 Clear All TRACK 8 a track, then press SELECT/ENTER to the selected track on the Program list. Select 2 place Note Repeat step 2 Program list. 3 to place E Program CD on the Program MP3 WMA TRACK 1 TRACK 12 TRACK 2 TRACK 8 TRACK 1.mp3 TRACK 3 TRACK 10 TRACK 2.mp3 TRACK 4 TRACK 3 TRACK 3.mp3 TRACK 7 TRACK 7.mp3 Clear All TRACK 8 0: 56: 18 STER. Audio CD 00:00 Clear All programmed track you selected last is highlighted on Press PLAY to start. in the order in which you programmed the tracks and "PROG." appears on the menu screen. resume normal select a on the Program list playback from programmed (or MP3/WMA) list and then press SELECT/ENTER. "PROG." indicator disappears on the menu screen. in the display window. Tracks on the menu a the program icon and "ALL" appears Repeat mode, list, press Track from the on menu screen. press REPEAT icon and "OFF" appears Repeat Erasing on second time. a Repeat on Program the a third time. menu screen. List 1 Press PROGRAM MP3/WMA disc Program track of CD disappears repeat all tracks REPEAT The 6 Playback begins all of the tracks normal icon and "TRACK" appears Repeat To cancel to the next page. Press MENU to move to the previous page. move Playback stops after have played once. resume screen. The Press TITLE to left. repeat the track currently playing, press REPEAT. The To 5 playing. playback, from To Press 3/4 to select the track you want to start To To Repeat Programmed menu the program list. 7 on OFF Press 2. The steps 2-6 of "Programmed Playback with Audio CD and MP3/WMA disc" "PROG." indicator 3 MP3/WMA menu menu. playback 4 programmed playback, press PROGRAM. TRACK 3.mp3 TRACK 8.mp3 NORM. Program TRACK 4.mp3 TRACK 5.mp3 TRACK 6.mp3 Follow PROGRAM to exit the or TRACK 2.mp3 TRACK 4.mp3 TRACK 6 Press RETURN 3 E TRACK 8.mp3 TRACK 5 4 additional tracks E The during playback (Audio CD and only) or in the stop mode to enter the Edit mode. mark will appear. 2 Press 2 to move to the Program list. 3 Use 3/4 to select the track that you wish to from the Program list. erase 4 Press CLEAR. The track will be erased from the Erasing the 1 Follow steps List" as Program Complete Program 1-2 of "Erasing a list. List Track from Program above. 2 Use 3/4 to select "Clear All", then press SELECT/ENTER. The complete Program The programs are for the disc will be erased. also cleared when the disc is removed. 21 Additional Information Last Condition DVD This CD player memorizes the Your remote control is user settings for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or switch off the If you load a disc that has its settings memothe latest stop position is automatically recalled. player. rized, player as well it. be device), screen saver 2 The sure your DVD operate for your LG TV. (to operate to press the DVD or a or dif- TV but- POWER, PR./CH.(E/D), VOL (1 /2), MUTE and TV AV buttons picture minutes, the DVD Player will automatically turn itself off. Select You must select the appropriate system mode for your TV system. If NO DISC appears in the display window, press and hold PAUSE on the front panel for more than 5 seconds to be able to select a system (PAL, NTSC, or AUTO). system does not coincide with the system of your TV, normal color picture may not be on remote control are used to operate the LG TV. Remote Control Codes for LG TV This remote control appears when you leave the DVD Player in stop mode for about five minutes. After the Screen Saver has been engaged for about five ? operating To switch the remote control mode Setting Screen Saver System of ton first. Settings are stored in memory for use any time. This player does not memorize settings of a disc if you switch off the player before commencing to play The capable limited functions of LG TV. Before using the remote control, press the DVD TV button to select the device to be operated. 1 Notes -- as Follow the instructions below to ferent -- the TV Controlling Memory VCD1.1 supports two remote control codes for LG TV: Code 1 and Code 2. When the unit is shipped from the factory, the remote control is set to Code 1. To set the remote control to Code 2, hold down both the TV button and the number "2" button on the remote control. remote control are (If the batteries in the replaced while the remote control 2, the setting will revert to Code 1.) is set to Code To set the remote control back to Code 1, hold down both the TV button and the number "1" button on the remote control. When the selected displayed. AUTO: Select when DVD Multi NTSC: player is connected with system TV. Select when DVD player is connected with NTSC-TV. PAL: Select when DVD PAL-TV. 22 Note If the remote control does not TV, try the other code ly supplied with the LG TV. Due to the variety is connected with operate operate your particular the remote control original- of codes used OUR COMPANY cannot trol will player or use by manufacturers, guarantee that the remote every model of LG TV. con- Troubleshooting Check the following guide for the possible cause of before problem a service. Cause Symptom Correction No power. The power cord is disconnected. The power is on, but the DVD player does No disc is inserted. Plug the power securely. Insert disc. a cord into the wall outlet (Check that the DVD or, audio CD indicator in the window is not work. No contacting The TV is not set to receive DVD picture. signal output. Select the on the TV player The video cable is not connected display lit.) appropriate video input mode the picture from the DVD so the TV on appears Connect the video cable screen. securely. securely. No sound. The connected TV power is turned off. Turn The Select the correct equipment connected with the audio cable is not set to receive DVD signal output. The audio cables are not connected the TV. on input mode of the you can listen to the sound from the DVD player. audio receiver so Connect the audio cable securely. securely. The power of the equipment connected with the audio cable is turned off. The Digital Audio Output position. is set to the playback picture is The disc is the on equipment connected with the audio cable. Set the Digital Audio Output to the position, then turn on the DVD player again by pressing POWER. correct wrong The Turn Clean the disc. dirty. poor. The DVD not start player does playback. No disc is inserted. Insert disc. a (Check that the DVD, audio CD indicator in the DVD or display is lit.) An unplayable disc is inserted. Insert playable a disc. (Check the disc type, color system, and Regional code.) The disc is down. placed upside Place the disc with the playback side down. The disc is not within the placed guide. Place the disc inside the The disc is dirty. The level is set. Rating The remote control is not does not work remote properly. sensor Cancel the pointed at player. the of the DVD The remote control is too far from the DVD player. There is an the disc tray correctly Clean the disc. the The remote control on guide. obstacle in the path of the player. rating Rating function or change level. Point the remote control at the remote sensor of the DVD Operate (7 m). player. the remote control within 23 ft Remove the obstacle. remote control and the DVD The batteries in the remote control are Replace the batteries with new ones. exhausted. 23 REF NC Language Code Enter the (See appropriate 12). List code number for the initial settings "Disc Audio", "Disc Subtitle" and/or "Disc Menu" page Code Language Code Language Code Language Code Language 6566 Abkhazian 7074 Fiji 7678 Lingala 8373 Singhalese 6565 Afar 7073 Finnish 7684 Lithuanian 8375 Slovak 6570 Afrikaans 7082 French 7775 Macedonian 8376 Slovenian 8381 Albanian 7089 Frisian 7771 Malagasy 8379 Somali 6577 Ameharic 7176 Galician 7783 Malay 6983 Spanish 6582 Arabic 7565 Georgian 7776 Malayalam 8385 Sudanese 7289 Armenian 6869 German 7784 Maltese 8387 Swahili 6583 Assamese 6976 Greek 7773 Maori 8386 Swedish 6588 Aymara 7576 Greenlandic 7782 Marathi 8476 Tagalog 6590 Azerbaijani 7178 Guarani 7779 Moldavian 8471 Tajik 6665 Bashkir 7185 Gujarati 7778 Mongolian 8465 Tamil 6985 Basque 7265 Hausa 7865 Nauru 8484 Tatar 6678 Bengali; Bangla 7387 Hebrew 7869 Nepali 8469 Telugu 6890 Bhutani 7273 Hindi 7879 Norwegian 8472 Thai 6672 Bihari 7285 Hungarian 7982 Oriya 6679 Tibetan 6682 Breton 7383 Icelandic 8065 Panjabi 8473 Tigrinya 6671 Bulgarian 7378 Indonesian 8083 Pashto, Pushto 8479 Tonga 7789 Burmese 7365 Interlingua 7065 Persian 8482 Turkish 6669 Byelorussian 7165 Irish 8076 Polish 8475 Turkmen 7577 Cambodian 7384 Italian 8084 Portuguese 8487 Twi 6765 Catalan 7465 Japanese 8185 Quechua 8575 Ukrainian 9072 Chinese 7487 Javanese 8277 Rhaeto-Romance 8582 Urdu 6779 Corsican 7578 Kannada 8279 Rumanian 8590 Uzbek 7282 Croatian 7583 Kashmiri 8285 Russian 8673 Vietnamese 6783 Czech 7575 Kazakh 8377 Samoan 8679 Volapuk 6865 Danish 7589 Kirghiz 8365 Sanskrit 6789 Welsh 7876 Dutch 7579 Korean 7168 Scots Gaelic 8779 Wolof 6978 English 7585 Kurdish 8382 Serbian 8872 Xhosa 6979 Esperanto 7679 Laothian 8372 Serbo-Croatian 7473 Yiddish 6984 Estonian 7665 Latin 8378 Shona 8979 Yoruba 7079 Faroese 7686 Latvian, Lettish 8368 Sindhi 9085 Zulu 24 Country Code Enter the appropriate List code number for the initial setting "Country Code" (See page 14). Code Country Code Country Code Country Code AD Andorra ER Eritrea LC Saint Lucia SC Country Seychelles AE United Arab Emirates ES Spain LI Liechtenstein SD Sudan AF ET Ethiopia LK Sri Lanka SE Sweden AG Afghanistan Antigua and FI Finland LR Liberia SG Singapore AI Anguilla FJ Fiji LS Lesotho SH Saint Helena AL Albania FK Falkland Islands LT Lithuania SI Slovenia AM Armenia FM Micronesia LU Luxembourg SJ Svalbard and Jan AN Netherlands Antilles FO Faroe Islands LV Latvia AO Angola FR France LY Libya SK Slovak AQ Antarctica FX France MA Morocco SL Sierra Leone AR Argentina (European Territory) MC Monaco SM San Marino AS American Samoa GA Gabon MD Moldavia SN Senegal AT Austria GB Great Britain MG Madagascar SO Somalia AU Australia GD Grenada MH Marshall Islands SR Suriname AW Aruba GE MK Macedonia ST Saint Tome and AZ Azerbaidjan GF Georgia French Guyana ML Mali SU Former USSR BA Bosnia-Herzegovina GH Ghana MM El Salvador Barbados GI Gibraltar MN Myanmar Mongolia SV BB SY Syria BD Bangladesh GL Greenland MO Macau SZ Swaziland BE Belgium GM Gambia MP Northern Mariana Islands TC Turks and Caicos Islands BF Burkina Faso GN Guinea MQ Martinique (French) TD Chad BG Bulgaria GP MR Mauritania TF BH Bahrain GQ Guadeloupe (French) Equatorial Guinea MS Montserrat BI Burundi GR Greece MT Malta TG Togo BJ Benin GS S. MU Mauritius TH Thailand BM Bermuda Isls. MV Maldives TJ Tadjikistan BN Brunei Darussalam GT Guatemala MW Malawi TK Tokelau BO Bolivia GU Guam MX Mexico TM Turkmenistan BR Brazil GW Guinea Bissau MY TN Tunisia BS Bahamas GY MZ TO Tonga BT Bhutan HK Guyana Hong Kong Malaysia Mozambique NA Namibia TP East Timor BV Bouvet Island HM Heard and McDonald NC New Caledonia TR Turkey BW Botswana Islands NE Niger TT Trinidad and BY Belarus HN Honduras NF Norfolk Island TV Tuvalu Barbuda Georgia & S. Sandwich (USA) Mayen Islands Republic Principe French Southern Territories (French) Tobago BZ Belize HR Croatia NG Nigeria TW Taiwan CA Canada HT Haiti NI Nicaragua TZ Tanzania CC Cocos HU Hungary NL Netherlands UA Ukraine CF (Keeling) Islands Central African Republic ID Indonesia NO Norway UG Uganda CG Congo IE Ireland NP Nepal UK United CH Switzerland IL Israel NR Nauru UM USA Minor Coast IN India NU Niue IO British Indian Ocean NZ New Zealand US United States Uruguay Kingdom Outlying CI Ivory CK Cook Islands CL Chile Territory OM Oman UY CM Cameroon IQ Iraq PA Panama UZ Uzbekistan CN China IR Iran PE Peru VA Vatican CO Colombia IS Iceland PF VC Saint Vincent & CR Costa Rica IT Italy PG Polynesia (French) Papua New Guinea CS Former Czechoslovakia JM Jamaica PH Philippines VE Venezuela CU Cuba JO Jordan PK Pakistan VG CV Cape JP Japan PL Poland VI Virgin Virgin CX Christmas Island KE Saint Pierre and VN Vietnam Cyprus KG Kenya Kyrgyzstan PM CY PN Pitcairn Island VU Vanuatu CZ Czech KH Cambodia6 PR Puerto Rico WF Wallis and Futuna Islands KI Kiribati PT Portugal WS Samoa DJ Republic Germany Djibouti KM Comoros PW Palau YE Yemen DK Denmark KN Saint Kitts & Nevis PY Paraguay YT DM Dominica KP North Korea QA Qatar YU Mayotte Yugoslavia DE Verde Anguilla Islands Miquelon City Grenadines Islands Islands DO Dominican KR South Korea RE Reunion ZA South Africa DZ Algeria KW Kuwait RO Romania ZM Zambia EC Ecuador KY Cayman RU Russian Federation ZR Zaire EE Estonia KZ Kazakhstan RW Rwanda ZW Zimbabwe EG Egypt LA Laos SA Saudi Arabia EH Western Sahara LB Lebanon SB Solomon Islands Republic Islands (French) State (British) (USA) 25 REF NC Specifications General Power Power requirements AC 110-240V consumption 14W Dimensions Mass (approx.) , 50/60 Hz 430X48X242mm(wxhxd) 2.34 (approx.) kg Operating temperature 5˚C to 35˚C Operating humidity 5%to90% (41˚F to 95˚F) System Laser Semiconductor Signal system PAL/NTSC Frequency DVD(PCM96kHz):8Hzto44kHz DVD(PCM48kHz):8Hzto22kHz response laser, wavelength 650 nm CD:8Hzto20kHz ratio Signal-to-noise More than 100dB (ANALOG Harmonic distortion Less than 0.008% Dynamic More than 100 dB range More than 95 dB OUT connectors only) (DVD) (CD) Outputs VIDEO OUT 1 Vp-p 75 Ω, sync 1.0 V negative, RCA jack x 1 S-VIDEO OUT (Y) (p-p), negative (C)0.3V(p-p)75Ω COMPONENT VIDEO OUT (Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2 75 Ω, sync, Mini DIN 4-pin x output (digital audio) 0.5V(p-p),75Ω,RCAjackx1 Audio output (optical audio) 5 V Audio output (analog audio) 2.0Vrms(1KHz,0dB),600Ω,RCAjack(L,R)x1 75 Ω, Optical connector x 1 1 Audio (p-p), x 1 Accessory Videocable.......................1 Audiocable.......................1 Remotecontrol....................1 Batteries.........................2 Design and specifications are subject to change without notice. Manufactured under license from Confidential unpublished DTS and DTS 26 Digital Out works. are Dolby Laboratories. Dolby and the double-D symbol are trademarks Copyright 1992-1997 Dolby Laboratories. All rights reserved. registered trademarks of Digital Theater Systems, Inc. of Dolby Laboratories. P/NO : 3834RS0063L
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
advertisement