LG | DV7821P | LG DV7821P Owner’s Manual

DVD PLAYER
OWNER'S MANUAL
MODEL
:
DV7821P
Before
connecting, operating
please
read this instruction booklet
or
adjusting this product,
carefully and completely.
Safety
Precautions
CAUTION
NOTES ON COPYRIGHTS:
It is forbidden
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash
equilateral triangle
with arrowhead
symbol
is intended to alert the
within
user
an
to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient
magnitude
to constitute
by law to copy, broadcast, show, broadcast
play in public, or rent copyrighted material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
via cable,
a
risk of electric
shock to persons.
SERIAL NUMBER: The serial number is found
The exclamation
point
within
is intended to alert the
important operating
user
an
equilateral triangle
to the presence of
and maintenance
(servicing)
accompanying the
instructions in the literature
product.
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
WARNING: Do not install this
such
as a
book
case or
equipment
in
confined space
a
similar unit.
CLASS 1
KLASSE 1
LASER PRODUCT
LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1
LASER APPARAT
CLASSE 1 PRODUIT
LASER
CAUTION:
This
To
Digital
ensure
manual
Video Disc
proper
carefully
use
Player employs
of this
a
Laser
product, please
System.
read this owner's
and retain for future reference should the unit
require maintenance, contact
(see service procedure).
an
Use of
or
controls, adjustments,
dures other than those
specified
authorized service location
the
performance of proceherein may result in haz-
ardous radiation exposure.
To
prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as
vases, should be
2
placed
on
the
apparatus.
the back of
unique to this unit and not available
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
on
this unit. This number is
___________________________________
___________________________________
to
Table of Contents
Introduction
SafetyPrecautions.........................2
TableofContents..........................3
BeforeUse..............................4-5
PlayableDiscs...........................4
Precautions.............................5
NotesonDiscs..........................5
AboutSymbols..........................5
.6
FrontPanelandDisplayWindow.
.
.
.
.
.
.
.
.
.
.
.
.
RemoteControl............................7
RearPanel................................8
Preparation
Connections............................9-10
ConnectingtoaTV.......................9
.10
ConnectingtoOptionalEquipment.
BeforeOperation.......................11-14
GeneralExplanation......................11
On-ScreenDisplay.......................11
InitialSettings........................12-14
12
Initial Settings General Operation.
Language..........................12
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Picture.............................12
Sound.............................13
Others.............................13
ParentalControl......................14
Operation with Audio CD and MP3/WMA Disc
Playing an Audio CD and MP3/WMA Disc
NotesonMP3/WMARecordings.
.
.
.
.
.
.
18-19
.
.
.
.
.
.
.
.
.
18
.18
Pause.............................19
MovingtoanotherTrack...............19
RepeatTrack/All/Off..................19
Search.............................19
Random...........................19
RepeatA-B.........................19
3DSurround........................19
.19
ChangingtheAudioChannel.
OperationwithJPEGDisc...................20
ViewingaJPEGdisc.....................20
MovingtoanotherFile.................20
.
.
.
.
.
.
.
.
.
.
StillPicture.........................20
Toflipthepicture.....................20
Torotatepicture......................20
.20
NotesonJPEGRecordings.
ProgrammedPlayback.....................21
Programmed Playback with Audio CD and
.
.
.
.
.
.
.
.
.
.
.
MP3/WMADisc.........................21
ProgrammedPlaybackwithVideoCD.
RepeatProgrammedTracks
ErasingaTrackfromProgramList.
ErasingtheCompleteProgramList.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.21
.21
.21
.21
AdditionalInformation.....................22
LastConditionMemory...................22
ScreenSaver...........................22
Operation
.15-17
OperationwithDVDandVideoCD.
PlayingaDVDandVideoCD...............15
.
.
.
.
.
.
.
GeneralFeatures........................15
MovingtoanotherTITLE...............15
15
Moving to another CHAPTER/TRACK
.
.
.
.
.
Search.............................15
Still Picture and
Frame-by-Frame Playback
.
16
SystemSelect..........................22
ControllingtheTV.......................22
Reference
Troubleshooting..........................23
LanguageCodeList.......................24
CountryCodeList.........................25
Specifications............................26
SlowMotion.........................16
Random...........................16
Repeat............................16
RepeatA-B.........................16
About the
symbols
TimeSearch........................16
Indicates hazards
3DSurround........................16
itself
or
for instructions
likely to cause
damage.
harm to the unit
other material
Zoom..............................17
MarkerSearch.......................17
SpecialDVDFeatures....................17
TitleMenu..........................17
Indicates
special operating
Indicates
tips
and hints for
features of this unit.
making
the task easier.
DiscMenu..........................17
CameraAngle.......................17
.17
ChangingtheAudioLanguage.
.17
ChangingtheAudioChannel.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Subtitles...........................17
3
INTRODUC
Before Use
Playable
Disc-related terms
Discs
Title
The main film content
(8cm/12cmdisc)
or
(VCD)
(8cm/12cmdisc)
you to locate it
Audio CD
(8cm/12cmdisc)
In
addition, this unit can play a DVD-R, DVD±RW,
CD, SVCD, and CD-R or CD-RW that
contains audio titles, MP3, WMA or JPEG files.
Kodak PICTURE
Depending
ment
some
or
played
--
--
the conditions of the
recording equip(or DVD-R/±RW) disc itself,
(or DVD-R/±RW) discs cannot be
the CD-R/RW
CD-R/RW
or
irregularly shaped
octagonal). It may result in
use
Notes
Some
on
CDs
(the
(e.g., heart-shaped
malfunctions.
DVDs and Video CDs
playback operations
(Video
Sections of
a
CD and audio CD
picture
or a
audio CD. Each track is
or an
enabling
only)
piece
assigned
musical
on a
a
video CD
track
number,
you to locate the track you want.
Scene
On
video CD with PBC
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
moving pictures
and still
you to locate the scene you want.
A scene is composed of one or several tracks.
of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
designed by the software manufacturer,
playback features of the unit may not be available
Types
There
of video CDs
are
two
disc content
some
enabling
easily.
the unit.
on
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
Do not
feature content
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
Track
Notes
on
accompanying
or
additional feature content, or music album.
Each title is assigned a title reference number
Video CD
--
(DVD only)
DVD
types of video CDs:
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
Video CDs
PBC
other functions may be added.
Refer also to the instructions supplied with the DVDs
with the
and Video CDs. Some DVDs made for business purposes may not be played on the unit.
typical computer-like operations. Moreover,
of high resolution can be played if they are
or
system via
menus, search
functions,
or
still
other
pictures
included in
the disc.
code of the DVD player and DVDs
player is designed and manufactured
4
for playback of region "4" encoded DVD software. The region code on the labels of some DVD discs
indicates which type of player can play those discs. This
unit can play only DVD discs labeled "4" or "ALL". If you
try to play any other discs, the message "Check Regional
Regional
This DVD
Code" will appear on the TV screen. Some DVD discs
may not have a region code label even though their
playback
4
is
prohibited by
area
limits.
Video CDs not
equipped
with PBC
(Version 1.1)
Operated
way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
in the
same
Before Use
(Continued)
After
the unit
Handling
discs
Storing
Precautions
playing,
store the disc in its
case.
When
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
The
light,
shipping the unit
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When
setting up the unit
The picture and sound of a
nearby TV, VCR, or radio
during playback. In this case, position
may be distorted
the unit away from the TV, VCR,
unit after removing the disc.
To
keep
Do not
near
or
radio,
turn off the
or
volatile
such
liquids,
as
the unit. Do not leave rubber
leave marks
on
a
long period
ter out.
plastic products in
of time. They will
the surface.
soft, dry cloth. If the surfaces
soft cloth
use
thinner,
or
are
moistened with
lightly
solution. Do not
benzine,
Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the centure
insecticide spray,
or
To clean the cabinet
a
discs
the unit
Cleaning
use a
Cleaning
temperature
the exterior surfaces clean
use
contact with the unit for
Use
as there may be a considerable
increase inside the car.
strong
as
a
extremely dirty,
detergent
mild
solvents such
these
as
might damage
alcohol,
the surface
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
About
records.
vinyl
Symbols
of the unit.
About the
To obtain
clear
picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Discs
DVD
VCD2.0
Handling
Hold the disc
on
playback side of the disc.
by the edges so that fingerprints
the surface.
Do not stick paper
during operation.
explained in this owner's
that specific DVD video disc.
symbols
screen
for instructions
of the following symbol is
represented by the symbol.
one
to the disc
DVD
Video CDs with the PBC
(playback control)
function.
discs
VCD1.1
Do not touch the
get
on
A section whose title has
applicable only
Notes
symbol display
"
or
tape
on
the disc.
Video CDs without the PBC
(playback control)
function.
will not
CD
Audio CDs.
MP3
MP3 disc.
WMA
WMA disc.
JPEG
JPEG disc.
5
INTRODUC
Front Panel and
Display
Window
PLAY(2)
playback.
Starts
PAUSE(;)
Pause playback temporarily/ press repeatedly
for frame-by-frame playback.
STOP(9)
Stops playback.
Skip/Scan ( Q / S )
beginning of current chapter/track
PREVIOUS chapter/track.
Reverse
Go to
Press and hold for two seconds for
POWER
Switches the
player
Forward
ON and OFF.
fast
a
Skip/Scan ( T /
chapter/track.
R
or
to
reverse
search.
)
Go to NEXT
Power indicator
Press and hold for two seconds for
Lights green when the
DVD player is turned on.
a
fast forward search.
OPEN/CLOSE
Opens
Disc
Insert
a
Tray
or
(
/
)
closes the disc
Display
tray.
window
Shows the current status of the
disc here.
player.
Remote Sensor
ANGLE active
TITLE
Indicates current title number
CHP/TRK
DVD
Indicates current
chapter
or
track number
DVD inserted
Indicates total
CD Audio CD inserted
playing time/elapsed
time
VCD Video CD inserted
MP3 MP3
or
PROG.
WMA disc
Programmed playback
active
inserted
RANDOM
RANDOM
playback
active
Indicates current
player
function:
Playback, Pause,
Indicates
MP3 VCD
6
mode
etc.
CD DVD
TITLE
CHP/TRK
PROG.
RANDOM ALL
AB
repeat
Remote Control
POWER
Switches DVD
Player
OPEN/CLOSE
ON and OFF.
Selects 3D SURROUND
disc
during
playback.
TV
POWER
Turns off TV sound.
-
operational
Selects
OPEN/CLOSE
SOUND/MUTE
-
control to DVD.
DISPLAY
PR./CH
DISPLAY
2
-
Selects
-
an
item in the
VOL
ENTER
TITLE
SLOW
menu on a
SKIP/SCAN
PLAY
SKIP/SCAN
(
)
CLEAR
?
AUDIO SUBTITLE ANGLE SETUP
SLOW(, /.)?
playback.
REPEAT
Reverse/ Forward slow
A-B
RANDOM ZOOM
?
*
SUBTITLE
Selects
a
a
subtitle
DVD
Reverse SKIP/SCAN
angle
setup
MARKER SEARCH
?
if
?
?
menu.
?
remote
?
track number
on
menu.
?
sensor
and
About 30° in each direction of the front of the
all.
sequence.
RANDOM
tracks in random order.
ZOOM
battery
video
image.
installation
Detach the
battery
the remote
control, and insert
AAA AAA
cover on
(size AAA) batteries
aligned correctly.
from the front of the
the
A-B
Plays
?
sensor.
sensor.
or
REPEAT
Repeat
?
Operation Range
(7 m)
a
Repeat chapter, track, title,
Remote control
Angle:
track.
CLEAR
?
Point the remote control at the remote
)
Press and hold button for about
Enlarges
remote
or
ANGLE
SEARCH
press the buttons.
Distance: About 23 ft
S
Enters to the program edit mode
exits from that.
point during playback.
Remote Control
(
program list or a mark on the
MARKER SEARCH menu.
MARKER
Displays
PLAY(H)
playback.
Removes
SETUP
Marks any
)
chapter
language.
camera
or removes
T
PROGRAM
?
available
Accesses
(
two seconds.
a menu.
language (DVD) or
audio channel (CD).
Selects
Forward SKIP/SCAN
previous chapter
audio
an
selection.
Search backward*/ go to beginning
of current chapter or track or go to
0-9 number buttons
AUDIO
of TV.
Starts
MARKER SEARCH
STOP(9)?
Stops playback.
an
menu
Search forward*/ go to next
or track.
?
playback temporarily/ press
repeatedly for frame-by-frame
playback.
Selects
input channel
PROGRAM
Pauses
Selects numbered items in
video CD
the discs Title menu, if
Displays
?
PAUSE/STEP
a
available.
DVD disc.
;
menu.
of
TITLE
volume of TV.
MENU
Accesses
Selects AUX A/V
Acknowledges
STOP
Selects channel of TV and
changes
setup
menu
SELECT/ENTER
PR./CH
menu.
PAUSE/STEP
the
Displays
with PBC.
TV AV
-
VOL
MENU
(left/right/up/down)
4
3
SELECT
display.
Removes the
RETURN
-
1
mode of
RETURN/TV AV
mode of remote
Accesses On-Screen
operational
remote control to TV.
DVD
Selects
tray.
This button is not available.
SOUND/MUTE
-
and closes the disc
Opens
with
the
rear
of
two R03
and
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
7
INTRODUC
Rear Panel
COAXIAL
Connect to
(Digital audio out jack)
digital (coaxial) audio equipment.
AUDIO OUT
Connect to
or
stereo
(Left/Right)
amplifier, receiver,
an
system.
VIDEO OUT
Connect to
a
TV with video
inputs.
COMPONENT SCAN VIDEO OUT
Connect to
a
TV with Y Pb Pr
(Y
inputs.
Pb
Pr)
S-VIDEO OUT
Connect to
OPTICAL
a
TV with S-Video
inputs.
(Digital audio out jack)
digital (optical) audio equipment.
Connect to
AC Power Cord
Plug
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
8
into the power
source.
Connections
Tips
Depending
Rear of TV
your TV and other equipment you wish
to connect, there are various ways you could connect
the player. Use only one of the connections
on
COMPONENT VIDEO INPUT
Pr
Pb
S-VIDEO
INPUT
Y
AUDIO INPUT
R
VIDEO
INPUT
L
described below.
PREATION
Please refer to the manuals of your TV, VCR, Stereo
or other devices as necessary to make the
System
best connections.
For better sound
the
AUDIO OUT
of your
reproduction, connect
jacks to the audio in jacks
player's
amplifier, receiver, stereo or audio/video equipment.
See "Connecting to Optional Equipment" on page 10.
C
S
AV
Caution
--
Make
directly to the
input channel.
Do not connect the DVD Player's AUDIO OUT jack to
the phono in jack (record deck) of your audio system.
Do not connect your DVD Player via your VCR. The
DVD image could be distorted by the copy protection
sure
the DVD
Player
is connected
TV. Tune the TV to the correct video
--
--
system.
to a TV
Connecting
Make
the
one
of the
capabilities
following connections, depending
existing equipment.
on
of your
Rear of
DVD
player
Video connection
1
2
Connect the VIDEO OUT
the video in
jack
on
jack on the DVD Player to
using the video cable (V).
the TV
Connect the Left and
Right AUDIO OUT jacks of
Player to the audio left/right in jacks on
(A) using the audio cables.
the DVD
TV
the
S-Video connection
1
Connect the S-VIDEO OUT
to the S-Video in
cable
2
on
the DVD
using
Player
the S-Video
(S).
Connect the Left and
Right AUDIO OUT jacks of
Player to the audio left/right in jacks on
(A) using the audio cables.
Component
2
jack
the TV
the DVD
TV
1
jack
on
Video
(Color Stream )
the
connection
Connect the COMPONENT VIDEO OUT
the DVD
to the
the TV
Y Pb
Player
using an
corresponding
Pr cable (C).
in
jacks on
jacks on
Connect the Left and
Right AUDIO OUT jacks of
Player to the audio left/right in jacks on
(A) using the audio cables.
the DVD
TV
the
9
Connections
Connecting
(Continued)
Optional Equipment
to
Rear of DVD
player
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic ll/
Pro Logic
Connect the Left and
DVD
Player to the
amplifier, receiver,
cables (A).
Right
AUDIO OUT
jacks on the
right in jacks on your
system, using the audio
audio left and
or
stereo
Connecting to an amplifier equipped with two
digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2, or DTS)
channel
1
O
one of the DVD Player's DIGITAL AUDIO
jacks (OPTICAL O or COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (optical O or coaxial X) audio cable.
OUT
You will need to activate the
Digital
Audio
Output"
player's digital output.
page 13).
on
Multi-channel sound
A
digital multi-channel
sound quality. For this
connection
provides
the best
you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats
supported by your DVD Player (MPEG 2,
Dolby Digital and DTS). Check the receiver manual and
the logos on the front of the receiver.
Caution:
Due to the DTS
will be in DTS
Licensing agreement, the digital output
digital out when DTS audio stream is
selected.
Notes
If the audio format of the
digital output
does not match
the
capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
--
Six Channel
Digital Surround Sound via digital cononly be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
nection
--
A
Connect
2 (See "Digital
--
X
To
see
screen
10
can
the audio format of the current DVD in the
display,
press AUDIO.
on-
OPTICAL
COAXIAL
DIGITAL INPUT
Amplifier (Receiver)
R
L
AUDIO INPUT
Before
Operation
Caution:
Before
using
the remote
control, press the DVD
button to select the device to be
General
or
TV
gives
DVD
Some DVDs
numbers
General
screen.
playback
Temporary
2
TITLE
can
be
of
an
Repeat
For
some
Track
Repeat
All Tracks
Repeat
A-B
Repeat
Off
OFF
Resume
be
setting
functions,
setting.
Title
Repeat
AB
item.
Feedback Field Icons
Repeat Chapter
Action
display operation
Press DISPLAY
setting
be also be used for
number).
TRACK
displayed on the TV
changed on the menu.
can
title
CHAPT
ALL
Display
Some items
On-screen
1
basic instructions for
status
(e.g.,
can
press SELECT/ENTER to execute the
operating the
Player.
require specific operation or
allow only limited operation during playback. When this
occurs, the symbol
appears on the TV screen, indicating that the operation is not permitted by the DVD
Player or is not available on the disc.
On-Screen
the
change
The number buttons
operated.
Explanation
This manual
Press 1/2 to
3
play
(non-PBC
(non-PBC
from this
prohibited
Video CDs
or
only)
Video CDs
only)
point
not available
Notes
Some discs may not
provide all of the features on the
display example shown below.
If no button is pressed for 10 seconds, the on-screen
display disappears.
during playback.
on-screen
Press 3/4 to select
an
The selected item will be
item.
highlighted.
DVD
Items
Title Number
1/3
Chapter
Number
1 /12
Time search
0:20:09
Audio
1 ENG
language
Digital Audio
Output mode
and
Subtitle
language
Angle
Sound
VCD2.0
D
5.1 CH
ABC
Shows the current title number and total number of
to the desired title number.
1/2,or
Numbers, SELECT/ENTER
titles, and skips
Shows the current
chapters, and skips
chapter number and total number
to the desired chapter number.
Shows the elapsed playing time, and
searches the point by the elapsed time directly.
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes the setting.
1/2,or
Numbers, SELECT/ENTER
Numbers, SELECT/ENTER
1/2,or
AUDIO
Shows the current subtitles
changes the setting.
1/1
Shows the current angle number and total number of
angles, and changes the angle number.
1/2,or
Shows the current sound
changes the setting.
1/2,or
NORM.
language, and
of
OFF
mode,
1/2,or
SUBTITLE
and
ANGLE
SOUND
VCD1.1
Items
Function (Press 3/4 to select desired item)
Track Number
1/4
Time
0:20:09
Audio Channel
STER.
Sound
Selection Method
Function (Press 3/4 to select desired item)
NORM.
Shows the current track number, total number of tracks
and PBC On mode, and skip to the desired track number.
Shows the
elapsed playing time (Display only)
Shows the audio channel, and
changes the audio channel.
Shows the current sound
changes the setting.
mode, and
Selection Method
1/2,or
Numbers, SELECT/ENTER
--
1/2,or
AUDIO
1/2,or
SOUND
11
PREATION
Before
Initial
You
Operation (Continued)
set your
can
Menu
Settings
Select
Personal Preferences
own
on
the
player.
Initial
General
Settings
you
Language
a
see
Operation
Press SETUP.
1
The
setup
for the
language
appears.
English
Disc Subtitle
Spanish
Disc Menu
French
Rating
German
TV
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
Country
TV
menu
Italian
Code
Language
Digital
Audio
Output
Others
Spanish
Code
Italian
Aspect
Menu
This is the
Aspect
Menu
Disc Audio
menu.
Disc Audio
Country
menu
setup
when you press SETUP.
Chinese
Language
Picture
Polish
Digital
Audio
Hungarian
Output
Other--------
TV
Aspect
DVD
4:3 Letterbox: Select when
Others
nected.
Displays
above and below the
The
4:3 Panscan: Select when
screen
selected
will show the current
item,
as
well
as
setting for the
alternate setting(s).
While the desired item is
selected, press 2, then
3/4 to select the desired
setting.
3
4
require
SETUP, RETURN,
5 setup
Press SELECT/ENTER to confirm your selection.
Some items
additional steps.
Press
or
PLAY to exit the
menu.
Disc
Scan
style
picture are
is
played
off).
Letterbox
4:3
Panscan
Disc Menu
16:9 Wide
:
:
The
To select another
code, press CLEAR.
Original
Disc Audio
English
Disc Subtitle
Disc Menu
French
Rating
German
Country
TV
Code
Menu
Spanish
Italian
Aspect
Language
Chinese
Polish
Digital
Audio
Output
Hungarian
Other--------
Others
12
Code
Aspect
Language
Others
original language set for the disc is selected.
language, press number buttons to
enter the corresponding 4-digit number according to the language code list on page 24. If you enter the wrong language
Other
sides of the
16:9 wide TV is connected.
4:3
Menu, Audio, and
Subtitle.
Original
a
Disc Subtitle
Digital
for the disc's
style (Both
Disc Audio
Menu
language
a
con-
bars
conventional TV set is
back in that
16:9 Wide: Select when
TV
Language
Select
masking
cut
Rating
DVD
a
with
connected. The video material formatted in the Pan &
Country
Language
standard 4:3 TV is
images
picture.
Press 3/4 to select the desired item.
2
a
theatrical
Audio
Output
Before
Operation (Continued)
Sound
Others
Audio
Digital
Output
Each DVD disc has
The
of audio
variety
output options.
player's Digital Audio Output according to the
Set the
a
type of audio system you
DRC, Vocal, PBC and Auto Play settings
Press 3/4 to select the desired item and press
setting of the selected item is
SELECT/ENTER. The
use.
changed
DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM"
between On and Off.
if you connected the DVD Player's DIGITAL OUT jack to
a Dolby Digital decoder (or an amplifier or other equip-
Disc Audio
DRC
On
Disc Subtitle
Vocal
On
ment with
Disc Menu
PBC
Rating
Auto
a
Dolby Digital decoder).
Stream/PCM: Select "Stream/PCM" if you connected
the DVD Player's DIGITAL OUT jack to an amplifier or
TV
other
Menu
equipment
decoder
or
with
a
DTS
Country
decoder, Dolby Digital
On
Play
Off
Code
Aspect
Language
MPEG decoder.
PCM: Select when connected to
stereo
be
can
changed.
amplifier.
The DVD
a
2-channel
player outputs
Audio
Digital
digital
sounds in the
Output
Others
PCM 2ch format when you play a DVD video disc
recorded on the Dolby Digital, MPEG1, or MPEG2
Dynamic Range Control (DRC)
recording system.
With the DVD
format, you can hear a program's soundtrack in the most accurate and realistic presentation
Disc Audio
DOLBY
DIGITAL
Disc Subtitle
Stream/PCM
Disc Menu
PCM
/PCM
Rating
Country
TV
Code
Aspect
Menu
48 KHz
Language
Digital
Audio
and the
Sample Freq.
96KHz
thanks to
possible,
digital
audio
technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
at
a
quietest ones). Then, you may
losing clarity
lower volume without
listen to
a
movie
of sound. Set
DRC to On for this effect.
Output
Vocal
Others
Sample Frequency
To
Sample Frequency setting, first select
Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is
made, this unit will automatically convert any 96KHz
signals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
made, this unit will pass each type of signal through
without any further processing.
change
the desired
Set Vocal to On
only
DVD is
The karaoke channels
playing.
when
multi-channel karaoke
a
on
the disc will
mix into normal stereo sound.
the
PBC
Set
Playback
Control
(PBC)
On: Video CDs with PBC
are
Off: Video CDs with PBC
are
to On
or
Off.
played according to the PBC.
played the same way as Audio
CDs.
Auto
You
Play
can
ically
set up the DVD
starts
If Auto
Play
search
a
play
DVD
playing
mode is set to
title that
back the title
On: Auto
Off: Auto
Player
Play
Play
so a
DVD disc automat-
whenever the DVD is inserted.
On, this DVD player will
playback time
automatically.
is
long
most and then
function is activated.
function is not activated.
Note
The Auto
Play
function may not work for
some
DVDs.
13
PREATION
Before
Operation (Continued)
Parental Control
Rating
Movies
DVDs may contain
on
scenes
not suitable for
Therefore, discs may contain Parental Control
information that
certain
to the
applies
complete
the disc. These
scenes on
disc
are
TV
7
Disc Menu
6
Country
TV
Code
Menu
3
2
Language
1
Digital
Audio
Unlock
Output
Change
Others
1
"Rating"
on
the
Setup
menu
using
the
3/4 buttons.
2
While
3
When you have not entered a password yet.
Enter a 4-digit password using the numbered but-
"Rating"
tons to create
a
is selected, press 2.
When you have already entered a password;
Enter a 4-digit password using the numbered but-
personal 4-digit security
pass-
word, then press SELECT/ENTER.
If you make a mistake before pressing SELECT/ENTER,
press CLEAR and enter 4-digit security password again.
4
1
Select
2
3
4
5
6
While
Audio
Output
Code
Country
the setup
step 3 of "Rating"
Select the first character
Shift the
the 3/4 buttons
cursor
using 2
using
second character
on
left.
using
the 3/4 buttons.
button and select the
3/4 buttons.
Press SELECT/ENTER to confirm your country
code selection, then press SETUP to exit the
Note
Confirmation of the
the code is
4-digit password
changed (see "Changing
is necessary when
the 4-digit code"
below.).
Changing
the
1
Follow
2
Enter the old
3
Select
Steps
4-digit
1-2
code
shown above to the left
as
Change using
3/4 buttons then press
4
Unlock: If you select
5
Enter exactly the same code a second
fy by pressing SELECT/ENTER.
6
Press SETUP to exit the
a
Unlock, Parental Control is
not active. The disc will
Ratings
play
be
1 to 8: Some discs contain scenes not
played. Higher
unless
an
rated
alternative
scenes
scene
one.
If
no
will not be
is available
The alternative must have the
lower
same
on
rating
played
14
SETUP to exit the
new
4-digit code,
then press
If you
forget your 4-digit
code
If you
word, follow the procedure below.
play-
your
password,
to clear the current pass-
1
Press SETUP to
2
Use the Number buttons to enter the
display
the
setup
menu.
6-digit
number
"210499".
The
4-digit password is
display for a moment.
rating
menu.
forget
time and veri-
menu.
the disc.
suitable alternative is found,
Press SELECT/ENTER to confirm your
Enter the
SELECT/ENTER.
or a
back will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
5 selection, then press
SELECT/ENTER.
in full.
suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will
(Rating).
code, then press SELECT/ENTER.
rating from 1 to 8 using the 3/4 buttons. One (1) has the least playback restrictions.
Eight (8) has the most playback restrictions.
Select
on
Code is selected, press 2.
Country
Follow
using
menu.
menu.
personal 4-digit security password.
then press SELECT/ENTER. Enter the 4-digit password again and press SELECT/ENTER to verify.
tons to confirm the
Code
Others
4
Aspect
US
Language
Digital
5
Rating
Code Set
Aspect
Menu
8
Disc Subtitle
List", page 25.).
Rating
Country
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Disc Audio
were
to the list
Disc Menu
The Parental Control feature allows
country-dependent.
disc, referring
Disc Subtitle
rated
whose standards
country/area
Code
(See "Country
to
or
scenes are
a
used to rate the DVD video
Disc Audio
from 1 to 8, and alternatively, more suitable scenes
available for selection on some discs. Ratings are
Select
DVD
Enter the code of
DVD
children.
Code
Country
3
Enter
a new
code
as
cleared. "P CLr" appears
shown above to the left
on
the
(Rating).
Operation
Playing
with DVD and Video CD
Playback Setup
Turn
on
the
1
DVD
VCD2.0
the TV and select the video
nected to the DVD
Audio
source
Note
VCD1.1
input
source con-
on
the audio
system and select
connected to the DVD
player.
Moving
Press OPEN/CLOSE to open the disc tray.
Load
your
2 playback
When
chosen disc in the tray, with the
starts
automatically.
If
playback
press PLAY.
In some cases, the disc
a
menu
Press
might
The
is
DVD
displayed
DVD
or
loading
a
want to
title/chapter
view, then press SELECT/ENTER
to start
you
play-
back.
Press TITLE
or
MENU to return to the
menu screen.
VCD2.0
Use the number buttons to select the track you want
Menu
setting
setup. See page
If Parental Control is set and the disc is not within the
the
4-digit
code must
be entered and/or the disc must be authorized
"Parental
--
Control",
DVDs may have a
Your player will not
different from your
player is 4 (four).
(see
num-
title number.
on a
more
1/3
1 /12
disc has
than
as
one
more
than
track, you
one
chapter
can move
or a
to another
follows:
press DISPLAY. Then, press 3/4 to select the
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
For
two-digit numbers, press
(0-9)in rapid succession.
Search
the numbered buttons
DVD
VCD2.0
VCD1.1
region
two seconds
during playback.
The
now
player
a
region
code
code for this
will
or
> for about
go into SEARCH mode.
2 Press and hold SKIP/SCAN .
or
>
repeatedly
to select the
required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
With
discs that have
The
title
MX100
page 14).
region code.
on
play
player.
a
1 Press and hold SKIP/SCAN .
Notes
Rating settings (not authorized),
to select
menu screen.
You also may set PBC to Off under
13.
--
(0-9)
Note
operating procedures for
depending on the disc.
the menu may differ
Follow the instructions on the each
title, you
to
can move
or > briefly during
playback to select the next chapter/track or to return
to the beginning of the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
menu screen.
and the exact
using
one
to another CHAPTER/TRACK
chapter/track
to view.
Press RETURN to return to the
a
than
Press SKIP/SCAN .
DVD
Use the 1 234 buttons to select the
more
VCD1.1
disc has
may be displayed first after
Video CD which offer a menu.
DVD
DISPLAY, then press the appropriate
Moving
appear
menu screen
use
follows:
as
playback
does not start,
When
a menu screen
disc has
bered button
instead.
If
to another TITLE
another title
Press OPEN/CLOSE to close the tray.
READING appears on the TV screen, and
otherwise, all operations described
1/3
side down.
3
Unless stated
the remote control. Some features may also be
available on the Setup menu.
player.
system: Turn
input
General Features
DVD and Video CD
a
(forward).
CD, the Search speed changes: mX2,
mX4, mX8, (backward) or MX2, MX4, MX8,
a
Video
(forward).
3 To exit SEARCH
mode, press PLAY.
15
OPERATION
with DVD and Video CD
Operation
General Features
Still Picture and
VCD2.0
DVD
2 You
can
during playback.
repeatedly
on
press REPEAT.
currently playing,
Track icon appears
the disc
repeat
Repeat
3 To exit
by
the remote
The
on
the TV
screen.
press REPEAT
currently playing,
All icon appears
Repeat mode,
Repeat
con-
trol.
a
the TV
on
screen.
press REPEAT
Off icon appears
the TV
on
a
third time.
screen.
Note
On
Slow Motion
VCD2.0
DVD
1 Press SLOW t
The
Repeat
The
now
PAUSE/STEP
Track/All/Off
Repeat
the track
second time.
go into PAUSE mode.
advance the picture frame-by-frame
pressing
-
repeat
The
2 To
VCD1.1
will
player
1 To
Frame-by-frame playback
1 Press PAUSE/STEP
The
Video CDs
(continued)
T
or
VCD1.1
setup
during playback.
2 Use the SLOW t
or
T to select the
required speed:
t
1/16, t 1/8, t 1/4 or t 1/2 (backward),
T 1/16, T 1/8, T 1/4 or T 1/2 (forward).
3 To exit slow motion mode, press PLAY.
to
menu
A*
To
reverse
is not
the
on
function. See page 13.
VCD2.0
DVD
AB
repeat
VCD1.1
OFF
sequence in
a
"
*
A
applicable
for
briefly
appears
2 Press A-B
in
must set PBC to Off
Repeat
a
title:
1 Press A-B at your chosen
Note
playback
PBC, you
the
or
"
Slow motion
use
A-B
Repeat
will enter SLOW mode.
player
Video CD with
a
on
starting point.
the TV
screen.
at your chosen end
again
point.
"A B" appears
Video CD.
briefly on the TV screen, and the repeat
begins ("AsB" appears the display window).
sequence
3 To cancel the sequence, press A-B.
Random
Karaoke DVD
VCD2.0
VCD1.1
1 Press RANDOM
during playback or in stop mode.
The unit automatically begins Random Playback and
"RANDOM" appears on the display window.
2 To return to normal
"RANDOM"
playback, press RANDOM
disappears on the display window.
until
Time Search
0:20:09
DVD
The Time Search function allows you to start
any chosen time on the disc.
1 Press DISPLAY
play
appears
on
the
SKIP/SCAN >
during Random playback,
(track) and resumes
playback.
2 Within 10
This function
works with DVD Karaoke discs and
only
video CD without PBC.
OnaVideoCDwithPBC,youmustsetPBCtoOffon
menu
to
use
the Random function. See
DVD
VCD2.0
4 Within 10
invalid
TRACK
ALL
Repeat Chapter
the title
icon appears
on
the TV
sec-
seconds, press SELECT/ENTER
to confirm
starts from the selected time
Repeat
currently playing,
Title icon appears
Repeat mode,
Repeat
on
the disc. If you enter
time, playback will continue from the
current
point.
DVD
VCD2.0
VCD1.1
3D SUR
This unit
press REPEAT
on
the TV
screen.
press REPEAT
Off icon appears
on
the TV
a
third time.
screen.
can
produce
a
3D Surround
simulates multi-channel audio
screen.
second time.
16
right
hours, minutes, and
in the box.
Repeat Chapter/Title/Off
-
REPEAT.
The
the number buttons to enter
OFF
repeat the currently playing chapter, press
3 To exit
to select the Time
display.
VCD1.1
NORM.
DVD Video Discs
The
use
start time. Enter
3D Surround
TITLE
repeat
time of the
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
Playback
Repeat
2 To
on-screen
seconds,
required
onds from left to
an
The
elapsed playing
the start time.
page 13.
1 To
dis-
The "-:--:--" appears in the Time Search box.
the
CHAPT
on-screen
at
screen.
seconds, press 3/4
Search icon in the
3 Within 10
Note
setup
playing
current disc.
the unit selects another title
the
The
during playback.
The Time Search box shows the
Tips
By pressing
Random
-:--:--
a
effect, which
playback
from two
conventional stereo
speakers, instead of the
speakers normally required to listen to
five
more
multi-
channel audio from
a
home theater
system.
1 Press SOUND to select "3D SUR"
2 To turn off the 3D Surround
again
to select "NORM".
or
during playback.
effect, press SOUND
with DVD and Video CD
Operation
General Features
Zoom
VCD2.0
DVD
during playback
or
still
playback
the
repeatedly,
discs: Menus
to acti-
level
magnification
steps.
2 Use the 1 234 buttons to
move
the zoomed
through
picture.
3 Press CLEAR to
the
normal
resume
playback
or
the contents of DVD Video
Checking
vate the Zoom function.
If you press ZOOM
increases up to six
return to
paused image.
DVDs may offer menus that allow you to access special
features. To use the disc menu, press MENU. Then,
press the appropriate number button to select an option.
Or, use the 1 234 buttons to highlight your selection,
then press SELECT/ENTER.
Title Menu
DVD
1 Press TITLE.
If the current title has
screen.
Note
The
function may not work for
zoom
some
2 The
DVDs.
VCD2.0
DVD
menu, the
list
menu can
menu
menu
will appear
angles, spoken language
chapters for the title.
camera
options,
and
the title menu, press TITLE
remove
the
on
may appear.
again.
VCD1.1
Disc Menu
MARKER SEARCH
1/9
a
Otherwise, the disc
and subtitle
3 To
Marker Search
DVD
VCD1.1
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
DVD Features
Special
(continued)
DVD
1 Press MENU.
You
can
nine
points
To enter
1
start
playback
from
memorized
a
point. Up
be memorized.
can
2 To
is
menu
displayed.
the disc menu, press MENU
remove
again.
mark, follow these steps.
a
During disc playback, press MARKER when
playback reaches the spot that you want to
Camera
Repeat step
on
the TV
briefly.
screen
1 to enter up to nine Marker
points
on a
disc.
To Recall
a
Angle
If the disc contains
memorize.
The Marker icon will appear
2
The disc
to
DVD
scenes
1/1
recorded at different
camera
angles, you can change to a different camera angle
during playback.
Press ANGLE repeatedly during playback to select
desired angle.
The number of the current
Marked Scene
angle
appears
the
on
a
display.
1 ENG
1
disc
During
playback,
The MARKER SEARCH
press SEARCH.
menu
will appear
on
2 Within 10
seconds, press 1/2 to select
number that you want to recall.
a
the
screen.
Marker
will start from the Marked
4 To
remove
scene.
the MARKER SEARCH menu, press
SEARCH.
To clear
1
a
During
playback,
The MARKER SEARCH
2
3
repeatedly during playback
language or audio track.
D
DVD
5.1 CH
to hear
Changing
the Audio Channel
Press AUDIO
repeatedly during playback to hear
(STER., LEFT or RIGHT).
Subtitles
press SEARCH.
menu
will appear
on
the
screen.
Press 1/2 to select the Marker number that you want
to
Language
VCD2.0
a
dif-
VCD1.1
a
dif-
ferent audio channel
Marked Scene
disc
the Audio
Press AUDIO
ferent audio
3 Press SELECT/ENTER.
Playback
Changing
DVD
ABC
1 ENG
Press SUBTITLE
different subtitle
repeatedly during playback
languages.
to
see
the
erase.
Press CLEAR.
Note
The Marker number will be erased from the list.
4
Repeat steps
5
To
2 and 3 to
erase
If
appears, the feature is not available
on
the disc.
additional Marker
numbers.
remove
the MARKER SEARCH menu, press
SEARCH.
17
OPERATION
with Audio CD and MP3/WMA Disc
Operation
Playing an Audio CD and
MP3
CD
The DVD
ings
Player
can
play
or
read the notes
files that have
on
The
on
the TV
on
screen.
player
About
the TV
go to step 4.
MP3/WMA disc; The MP3/WMA-JPEG choice
screen
not read
Go to
step
2
a
MP3/WMA Disc
limited
Press 3/4 to select the MP3/WMA then press
2 SELECT/ENTER.
1.
as
appears on the TV screen.
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
2.
3.
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Clear All
5.
OFF
00:00
Media
3
4
Press 3/4 to select
SELECT/ENTER.
Playback starts.
During playback,
track then press PLAY
A
Creator", which
single
creates
session disc
track, it
to
elapsed playing
menu.
player
playback
File
no
MP3/WMA
ISO9660 file
an
requires
is
system.
MP3/WMA files in the
MP3/WMA file in the 1st
playback
MP3/WMA files. If you wish
files, format all the data in
or use a new one.
names
should be named
incorporate ".mp3"
e.g. "********.MP3"
the current track's
or
using
or
8 letters
or
less
".wma" extension
"********.WMA".
7.
Donotusespecialletterssuchas"/:*?"<>"etc.
8.
Total number of files
on
the disc should be less than
650.
to the next page.
move
Press MENU to
6.
cannot
and must
time will appear on the display window and
Playback will stop at the end of the disc.
Press TITLE to
or
with this
compatibility
follows:
-
the disc
a
offers double the audio
the MP3 format.
first track. If there is
Press 3/4 to select a folder, and SELECT/ENTER.
A list of files in the folder appears.
Audio)
compression
-
CD
Folder7
Folder8
Microsoft audio
-
4.
Program
file
a
Sampling Frequency / only at 44.1kHz (MP3),
44.1kHz (WMA)
Bit rate / within 32 320kbps (MP3),
32
128kbps (WMA)
CD-R physical format should be "ISO 9660"
If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
"Direct-CD" etc., it is impossible to playback
MP3/WMA files. We recommend that you use "Easy22.05
menu
MP3 file that has
an
".mp3".
WMA(Window Media Audio)
technology.
WMA(Windows
compression of
JPEG
MP3 WMA
can
An WMA file is
MP3 WMA
The MP3/WMA
Recordings
compressed by using the
layer-3 file-coding scheme. We call
the ".mp3" file extension "MP3 files".
extension other than
Insert a disc and close the tray.
Audio CD; Audio CD menu appears
appears
MP3/WMA
MPEG1 audio
CD-RW discs.
playing MP3/WMA recordings,
MP3/WMA Recordings on right.
menu
on
An MP3 file is audio data
MP3/WMA formatted record-
Before
1
Notes
About MP3
WMA
CD-ROM, CD-R
on
MP3/WMA Disc
move
to the
previous
page.
This DVD
player requires discs/recordings
to meet
certain technical standards in order to achieve
Program
MP3 WMA
Program
CD
TRACK01
TRACK02
TRACK 1.mp3
TRACK03
TRACK 2.mp3
TRACK 5.mp3
TRACK06
TRACK 6.mp3
TRACK07
TRACK 7.mp3
Clear All
TRACK08
STER.
NORM.
Audio CD
menu
0: 56: 18
Clear All
TRACK 8.mp3
00:00
3
If you
are
use
in
a
MP3/WMA
menu
file list and want to return to the Folder
the 3/4 to
highlight
SELECT/ENTER to return to the
5
To
18
stop playback
and press
previous
at any other
optimal
automatically
many different types
(including CD-R containing
MP3 or WMA files). That require certain pre-existing
conditions (see above) to insure compatible playback.
OFF
Tip
list,
are
are
of recordable disc formats
TRACK 4.mp3
TRACK05
Pre-recorded DVDs
set to these standards. There
TRACK 3.mp3
TRACK04
playback quality.
menu screen.
time, press STOP.
Customers should also note that
required
permission
is
in order to download MP3/WMA files and
music from the Internet. Our company has no
grant such permission. Permission should
to
always
be
sought
from the
copyright
owner.
right
Operation
Pause
with Audio and MP3/WMA Disc
MP3
CD
1 Press PAUSE/STEP
WMA
Repeat
during playback.
2 To return to
playback,
PAUSE/STEP again.
press PLAY
or
To
1
press
repeat
to another Track
Press SKIP/SCAN .
or
>
Press SKIP/SCAN . twice
In
previous
case
WMA
briefly during
step back
to
briefly
of audio
CD,
to
The
directly to any track, enter
the numbered buttons (0-9)
to go
using
icon and "A
Repeat
"
appears
during playback.
Repeat Track/All/Off
1 To
MP3
WMA
repeat the track currently playing, press REPEAT.
The
Repeat
icon and "TRACK" appears
the
on
begins
to
play repeatedly.
Repeat
icon and "OFF" appears
3D Surround
This unit
can
menu
repeat all tracks
on a
disc, press REPEAT
produce
a
3D Surround
Repeat
icon and "ALL" appears
on
the
The
Repeat mode,
Repeat
Search
MP3
CD
on
two seconds
during playback.
The
now
will
from two
five
more
multi-
channel audio from
a
home theater
again
or
system.
during playback.
effect, press SOUND
to select "NORM.".
the
third time.
a
menu screen.
Press AUDIO
the Audio Channel
CD
repeatedly during playback to hear a
(STER., LEFT, or RIGHT).
different audio channel
WMA
1 Press and hold SKIP/SCAN .
player
effect, which
menu screen.
press REPEAT
icon and "OFF" appears
menu screen.
speakers, instead of the
speakers normally required to listen to
Changing
3 To cancel
press
conventional stereo
2 To turn off the 3D Surround
a sec-
the
playback
1 Press SOUND to select "3D SUR"
ond time.
The
on
play,
CD
screen.
2 To
menu screen.
icon and "A B" appears
simulates multi-channel audio
CD
the
on
at your chosen end point.
on the menu screen,
again
Repeat
press A-B at your chosen start*
3 To exit the sequence and return to normal
A-B again.
track.
the track number
CD
sequence.
and the sequence
to return to the
or
a
2 Press A-B
The
playback to go to the next track
beginning of the current track.
the
MP3
CD
A-B
During disc playback,
ing point.
The
Moving
(Continued)
> for about
or
go into SEARCH mode.
2 Press and hold SKIP/SCAN .
or > repeatedly
required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
to select the
Search
speed
and direction
are
indicated
on
the
menu
screen.
3 To exit SEARCH
Random
mode, press PLAY.
MP3
CD
1 Press RANDOM
WMA
during playback
or
when
playback
is
stopped.
The unit
automatically begins
RANDOM
and
or
Random
"RAND." appears
on
the
Playback and
display window
menu screen.
2 To return to normal
edly until RANDOM
display window and
press RANDOM repeat"RAND." disappears on the
playback,
or
menu screen.
19
OPERATION
Operation
Viewing
a
with JPEG Disc
JPEG disc
Moving
JPEG
This DVD
Player can play discs with JPEG files and
Kodak picture CD. Before playing JPEG recordings,
read the notes on JPEG Recordings on right.
Insert
1
a
menu
appears
>
once
or
during viewing a
previous file.
to the
Still Picture
1 Press PAUSE/STEP
on
or
to advance to the next file
picture
disc and close the tray.
The MP3/WMA-JPEG choice
TV
to another File
Press SKIP/SCAN .
the
screen.
The
will
during
slide show.
go into PAUSE mode.
2 To return to the slide show, press PLAY or press
PAUSE/STEP again.
player
now
MP3 WMA
To
JPEG
2
the
flip
picture
Press 3/4 during showing a picture
picture horizontally or a vertically.
Press 3/4 to select the JPEG then press
to
flip
the
SELECT/ENTER.
The JPEG
menu
appears
on
the TV
To rotate
screen.
Press 1/2
JPEG
Folder2
during showing
clockwise
picture
Folder1
picture
or
a
picture
to rotate the
counter clockwise.
Folder3
Folder4
Folder5
Notes
Folder6
Folder7
on
JPEG
Recordings
Folder8
Slide
Depending
Off
Speed
upon the size and number of the JPEG
a long time for the DVD player to
files, it could take
Press 3/4 to select
and SELECT/ENTER.
3 A list of files in the folderfolder,
appears.
Press RETURN to
choice
a
move
to the MP3/WMA-JPEG
menu.
If you
"
are
in
a
file list and want to return to the Folder
the 34 buttons
on
the remote to
---
reduce the resolution of the JPEG files
pixels
and burn another disc.
on
If you want to view a particular file, press 3/4 to
highlight a file and press SELECT/ENTER or
PLAY.
that all the selected files have the
Viewing the file proceeding starts.
During viewing a file, press RETURN
the previous menu (JPEG menu).
rename
Press MENU to
JPEG
move
move
to
move
to
to the next page.
to the previous page.
Folder1
Picture1.jpg
Picture2.jpg
Picture3.jpg
Picture4.jpg
Picture5.jpg
Picture6.jpg
Picture7.jpg
5/32
1024X768
Slide
Speed
5/32
Off
1024X768
Picture5.jpg
Tip
There
are
three
viewing
Slide
Speed options: Fast,
to highlight the Slide
select the option you want to
Normal, Slow, and Off. Press 1/2
Speed
then press 3/4 to
use, and press SELECT/ENTER.
To
stop viewing
The JPEG
20
menu
the disc should
be less than 650.
When you are using software such as
Creator" to burn the jpeg files into the
menu screen.
Press TITLE to
5
big
Some disc may be incompatible due to different
recording format or condition of disc.
highlight
and press SELECT/ENTER to return to the
previous
4
too
Total number of files and folders
use
"
are
to less than 2 mega
Tip
list,
read the disc's contents. If you don't see an ondisplay after several minutes, some of the files
screen
at any other
appears.
time, press STOP.
when
copying
into the CD
"Easy
CD
CD-R,
ensure
".jpg"
extensions
layout.
If the files have
File
them
names
be read
shown
by
as
".jpe" or ".jpeg" extensions, please
as ".jpg" files.
without
".jpg" extension will not be able to
player. Even though the files are
image files in windows explorer.
this DVD
JPEG
Programmed Playback
Programmed Playback
CD
VCD2.0
with Audio CD
function enables you to store your favorite
tracks from any disc in the player memory.
Program
Program
mode to enter the
during playback or in
Program Edit mode.
the stop
E
The
mark will appear to the right of the word
the right side of the menu screen.
on
with Video CD
Note
On
a
setup
Video CD with
menu
to
PBC, you
the
use
must set PBC to Off
on
the
function. See page 13.
Program
contain 30 tracks.
can
Press PROGRAM
1
WMA
Programmed Playback
and MP3/WMA Disc
The
MP3
VCD1.1
Program
OPERATION
Insert Video CD and close the tray.
1
2
Press PROGRAM while
The VCD
Program
menu
is
playback
stopped.
will appear.
Program
VCD
E
TRACK 1
TRACK 2
Note
TRACK 3
Press PROGRAM to exit the
Program
Edit
TRACK 4
mode;
TRACK 5
TRACK 6
E
the
mark will
disappear.
TRACK 7
Clear All
TRACK 8
a track, then press SELECT/ENTER to
the selected track on the Program list.
Select
2 place
Note
Repeat step 2
Program list.
3
to
place
E
Program
CD
on
the
Program
MP3 WMA
TRACK 1
TRACK 12
TRACK 2
TRACK 8
TRACK 1.mp3
TRACK 3
TRACK 10
TRACK 2.mp3
TRACK 4
TRACK 3
TRACK 3.mp3
TRACK 7
TRACK 7.mp3
Clear All
TRACK 8
0: 56: 18
STER.
Audio CD
00:00
Clear All
programmed
track you selected last is
highlighted
on
Press PLAY to start.
in the order in which you programmed
the tracks and "PROG." appears on the menu screen.
resume
normal
select
a
on
the
Program
list
playback
from
programmed
(or MP3/WMA) list
and then press SELECT/ENTER.
"PROG." indicator disappears on the menu
screen.
in the
display
window.
Tracks
on
the
menu
a
the program
icon and "ALL" appears
Repeat mode,
list, press
Track from
the
on
menu screen.
press REPEAT
icon and "OFF" appears
Repeat
Erasing
on
second time.
a
Repeat
on
Program
the
a
third time.
menu screen.
List
1 Press PROGRAM
MP3/WMA disc
Program
track of CD
disappears
repeat all tracks
REPEAT
The
6 Playback begins
all of the tracks
normal
icon and "TRACK" appears
Repeat
To cancel
to the next page.
Press MENU to move to the previous page.
move
Playback stops after
have played once.
resume
screen.
The
Press TITLE to
left.
repeat the track currently playing, press REPEAT.
The
To
5 playing.
playback,
from
To
Press 3/4 to select the track you want to start
To
To
Repeat Programmed
menu
the program list.
7
on
OFF
Press 2.
The
steps 2-6 of "Programmed Playback with
Audio CD and MP3/WMA disc"
"PROG." indicator
3
MP3/WMA
menu
menu.
playback
4 programmed playback,
press PROGRAM.
TRACK 3.mp3
TRACK 8.mp3
NORM.
Program
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
Follow
PROGRAM to exit the
or
TRACK 2.mp3
TRACK 4.mp3
TRACK 6
Press RETURN
3
E
TRACK 8.mp3
TRACK 5
4
additional tracks
E
The
during playback (Audio CD and
only) or in the stop mode to enter the
Edit mode.
mark will appear.
2 Press 2 to
move
to the
Program
list.
3 Use 3/4 to select the track that you wish to
from the Program list.
erase
4 Press CLEAR.
The track will be erased from the
Erasing
the
1 Follow
steps
List"
as
Program
Complete Program
1-2 of
"Erasing
a
list.
List
Track from
Program
above.
2 Use 3/4 to select "Clear
All", then press
SELECT/ENTER.
The
complete Program
The programs
are
for the disc will be erased.
also cleared when the disc is removed.
21
Additional Information
Last Condition
DVD
This
CD
player
memorizes the
Your remote control is
user
settings
for the last disc
that you have viewed. Settings remain in memory even
if you remove the disc from the player or switch off the
If you load a disc that has its settings memothe latest stop position is automatically recalled.
player.
rized,
player
as
well
it.
be
device),
screen saver
2
The
sure
your DVD
operate for your LG TV.
(to operate
to press the DVD
or
a
or
dif-
TV but-
POWER, PR./CH.(E/D), VOL (1 /2), MUTE
and TV AV buttons
picture
minutes, the DVD Player will automatically
turn itself off.
Select
You must select the
appropriate system mode for your
TV system. If NO DISC appears in the display window,
press and hold PAUSE on the front panel for more than
5 seconds to be able to select a system (PAL, NTSC,
or AUTO).
system does not coincide with the
system of your TV, normal color picture may not be
on
remote control
are
used to
operate the LG TV.
Remote Control Codes for LG TV
This remote control
appears when you leave the
DVD Player in stop mode for about five minutes.
After the Screen Saver has been engaged for about five
?
operating
To switch the remote control mode
Setting
Screen Saver
System
of
ton first.
Settings are stored in memory for use any time.
This player does not memorize settings of a disc if
you switch off the player before commencing to play
The
capable
limited functions of LG TV.
Before using the remote control, press the DVD
TV button to select the device to be operated.
1
Notes
--
as
Follow the instructions below to
ferent
--
the TV
Controlling
Memory
VCD1.1
supports
two remote control
codes for LG TV: Code 1 and Code 2.
When the unit is
shipped
from the
factory,
the remote
control is set to Code 1.
To set the remote control to Code 2, hold down both
the TV button and the number "2" button on the
remote control.
remote control
are
(If the batteries in the
replaced while the remote control
2, the setting will revert to Code 1.)
is set to Code
To set the remote control back to Code 1, hold down
both the TV button and the number "1" button on the
remote control.
When the selected
displayed.
AUTO:
Select when DVD
Multi
NTSC:
player
is connected with
system TV.
Select when DVD
player
is connected with
NTSC-TV.
PAL:
Select when DVD
PAL-TV.
22
Note
If the remote control does not
TV, try the other code
ly supplied
with the LG TV.
Due to the
variety
is connected with
operate
operate your particular
the remote control original-
of codes used
OUR COMPANY cannot
trol will
player
or use
by manufacturers,
guarantee that the remote
every model of LG TV.
con-
Troubleshooting
Check the
following guide
for the
possible
cause
of
before
problem
a
service.
Cause
Symptom
Correction
No power.
The power cord is disconnected.
The power is on, but
the DVD player does
No disc is inserted.
Plug the power
securely.
Insert
disc.
a
cord into the wall outlet
(Check
that the DVD or,
audio CD indicator in the
window is
not work.
No
contacting
The TV is not set to receive DVD
picture.
signal
output.
Select the
on
the TV
player
The video cable is not connected
display
lit.)
appropriate video input mode
the picture from the DVD
so
the TV
on
appears
Connect the video cable
screen.
securely.
securely.
No sound.
The connected TV power is turned off.
Turn
The
Select the correct
equipment
connected with the
audio cable is not set to receive DVD
signal output.
The audio cables
are
not connected
the TV.
on
input mode of the
you can listen to the
sound from the DVD player.
audio receiver
so
Connect the audio cable
securely.
securely.
The power of the equipment connected
with the audio cable is turned off.
The
Digital Audio Output
position.
is set to the
playback picture
is
The disc is
the
on
equipment
connected with
the audio cable.
Set the
Digital Audio Output to the
position, then turn on the DVD
player again by pressing POWER.
correct
wrong
The
Turn
Clean the disc.
dirty.
poor.
The DVD
not start
player does
playback.
No disc is inserted.
Insert
disc.
a
(Check
that the
DVD,
audio CD indicator in the DVD
or
display
is
lit.)
An
unplayable
disc is inserted.
Insert
playable
a
disc.
(Check
the disc
type, color system, and Regional code.)
The disc is
down.
placed upside
Place the disc with the
playback
side
down.
The disc is not
within the
placed
guide.
Place the disc
inside the
The disc is
dirty.
The
level is set.
Rating
The remote control is not
does not work
remote
properly.
sensor
Cancel the
pointed at
player.
the
of the DVD
The remote control is too far from the
DVD
player.
There is
an
the disc
tray correctly
Clean the disc.
the
The remote control
on
guide.
obstacle in the
path of the
player.
rating
Rating
function
or
change
level.
Point the remote control at the remote
sensor
of the DVD
Operate
(7 m).
player.
the remote control within 23 ft
Remove the obstacle.
remote control and the DVD
The batteries in the remote control
are
Replace
the batteries with
new ones.
exhausted.
23
REF NC
Language Code
Enter the
(See
appropriate
12).
List
code number for the initial
settings
"Disc
Audio", "Disc Subtitle" and/or "Disc Menu"
page
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Ameharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Rumanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
24
Country Code
Enter the
appropriate
List
code number for the initial
setting "Country
Code"
(See
page
14).
Code
Country
Code
Country
Code
Country
Code
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Country
Seychelles
AE
United Arab Emirates
ES
Spain
LI
Liechtenstein
SD
Sudan
AF
ET
Ethiopia
LK
Sri Lanka
SE
Sweden
AG
Afghanistan
Antigua and
FI
Finland
LR
Liberia
SG
Singapore
AI
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
(European
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
MK
Macedonia
ST
Saint Tome and
AZ
Azerbaidjan
GF
Georgia
French Guyana
ML
Mali
SU
Former USSR
BA
Bosnia-Herzegovina
GH
Ghana
MM
El Salvador
Barbados
GI
Gibraltar
MN
Myanmar
Mongolia
SV
BB
SY
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
MR
Mauritania
TF
BH
Bahrain
GQ
Guadeloupe (French)
Equatorial Guinea
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
TN
Tunisia
BS
Bahamas
GY
MZ
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
Malaysia
Mozambique
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
Barbuda
Georgia
& S. Sandwich
(USA)
Mayen
Islands
Republic
Principe
French Southern
Territories
(French)
Tobago
BZ
Belize
HR
Croatia
NG
Nigeria
TW
Taiwan
CA
Canada
HT
Haiti
NI
Nicaragua
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
CF
(Keeling) Islands
Central African Republic
ID
Indonesia
NO
Norway
UG
Uganda
CG
Congo
IE
Ireland
NP
Nepal
UK
United
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA Minor
Coast
IN
India
NU
Niue
IO
British Indian Ocean
NZ
New Zealand
US
United States
Uruguay
Kingdom
Outlying
CI
Ivory
CK
Cook Islands
CL
Chile
Territory
OM
Oman
UY
CM
Cameroon
IQ
Iraq
PA
Panama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
Polynesia (French)
Papua New Guinea
CS
Former Czechoslovakia
JM
Jamaica
PH
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape
JP
Japan
PL
Poland
VI
Virgin
Virgin
CX
Christmas Island
KE
Saint Pierre and
VN
Vietnam
Cyprus
KG
Kenya
Kyrgyzstan
PM
CY
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
Republic
Germany
Djibouti
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
DE
Verde
Anguilla
Islands
Miquelon
City
Grenadines
Islands
Islands
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
Republic
Islands
(French)
State
(British)
(USA)
25
REF NC
Specifications
General
Power
Power
requirements
AC 110-240V
consumption
14W
Dimensions
Mass
(approx.)
,
50/60 Hz
430X48X242mm(wxhxd)
2.34
(approx.)
kg
Operating temperature
5˚C to 35˚C
Operating humidity
5%to90%
(41˚F
to
95˚F)
System
Laser
Semiconductor
Signal system
PAL/NTSC
Frequency
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
response
laser, wavelength
650
nm
CD:8Hzto20kHz
ratio
Signal-to-noise
More than 100dB
(ANALOG
Harmonic distortion
Less than 0.008%
Dynamic
More than 100 dB
range
More than 95 dB
OUT connectors
only)
(DVD)
(CD)
Outputs
VIDEO OUT
1
Vp-p
75 Ω, sync
1.0 V
negative,
RCA
jack
x
1
S-VIDEO OUT
(Y)
(p-p),
negative
(C)0.3V(p-p)75Ω
COMPONENT VIDEO OUT
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
75 Ω,
sync, Mini DIN
4-pin
x
output (digital audio)
0.5V(p-p),75Ω,RCAjackx1
Audio
output (optical audio)
5 V
Audio
output (analog audio)
2.0Vrms(1KHz,0dB),600Ω,RCAjack(L,R)x1
75 Ω,
Optical
connector
x
1
1
Audio
(p-p),
x
1
Accessory
Videocable.......................1
Audiocable.......................1
Remotecontrol....................1
Batteries.........................2
Design
and
specifications
are
subject
to
change
without notice.
Manufactured under license from
Confidential
unpublished
DTS and DTS
26
Digital
Out
works.
are
Dolby Laboratories. Dolby and the double-D symbol are trademarks
Copyright 1992-1997 Dolby Laboratories. All rights reserved.
registered
trademarks of
Digital
Theater
Systems,
Inc.
of
Dolby
Laboratories.
P/NO
:
3834RS0063L
Download PDF