LG | DV8621P | LG DV8621P Owner’s Manual

DVD PLAYER
OWNER'S MANUAL
MODEL
12
MONTH
GUARANTEE
:
DV8621P
Before
connecting, operating
please
read this instruction booklet
or
adjusting this product,
carefully and completely.
Safety
Precautions
CAUTION
NOTES ON COPYRIGHTS:
RISK OF ELECTRIC SHOCK
DO NOT OPEN
It is forbidden
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
by law to copy, broadcast, show, broadcast
play in public, or rent copyrighted material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
via cable,
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
This
shock to persons.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINIThe exclamation
point
is intended to alert the
within
user
an
equilateral triangle
to the presence of
TION TELEVISION SETS ARE FULLY COMPATIBLE WITH
THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE
important operating and maintenance (servicing)
instructions in the literature accompanying the
product.
DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO
THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE
WARNING: TO REDUCE THE RISK OF FIRE OR ELEC-
QUESTIONS REGARDING OUR TV SET COMPATIBILITY
WITH THIS MODEL 525p AND 625p DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
TRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
WARNING: Do not install this
such
as a
book
case or
equipment
in
a
confined space
similar unit.
SERIAL NUMBER: The serial number is found
Serial No.
CAUTION:
To
Digital Video Disc Player employs
manual
of this
a
Laser
System.
read this owner's
proper
product, please
carefully and retain for future reference should the
ensure
use
require maintenance, contact
(see service procedure).
Use of controls,
an
unit
authorized service location
adjustments, or the performance of procespecified herein may result in haz-
dures other than those
ardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as
vases, should be
2
placed
on
the back of
unique to this unit and not available
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
This
on
this unit. This number is
the apparatus.
___________________________________
___________________________________
to
Table of Contents
Introduction
SafetyPrecautions.........................2
TableofContents..........................3
BeforeUse..............................4-5
PlayableDiscs...........................4
Precautions.............................5
NotesonDiscs..........................5
AboutSymbols..........................5
.6
FrontPanelandDisplayWindow.
.
.
.
.
.
.
.
.
.
.
.
.
RemoteControl............................7
Operation with Audio CD and MP3/WMA Disc
Playing an Audio CD and MP3/WMA Disc
NotesonMP3/WMARecordings.
.
Preparation
.
.
.
.
.18-19
18
.
.
.
.
.
.
.
.
.18
Pause.............................19
MovingtoanotherTrack...............19
RepeatTrack/All/Off..................19
Search.............................19
Random...........................19
RepeatA-B.........................19
3DSurround........................19
.19
ChangingtheAudioChannel.
OperationwithJPEGDisc...................20
ViewingaJPEGdisc.....................20
MovingtoanotherFile.................20
.
RearPanel................................8
.
.
.
.
.
.
.
.
.
.
.
.
Connections............................9-10
StillPicture.........................20
ConnectingtoaTV.......................9
.10
ConnectingtoOptionalEquipment.
BeforeOperation.......................11-14
GeneralExplanation......................11
On-ScreenDisplay.......................11
InitialSettings........................12-14
12
Initial Settings General Operation.
Language..........................12
Toflipthepicture.....................20
Torotatepicture......................20
.20
NotesonJPEGRecordings.
ProgrammedPlayback.....................21
Programmed Playback with Audio CD and
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Picture.............................12
Sound.............................13
Others.............................13
ParentalControl......................14
.
.
.
.
.
.
.
.
.
.
.
MP3/WMADisc.........................21
ProgrammedPlaybackwithVideoCD.
RepeatProgrammedTracks
ErasingaTrackfromProgramList.
ErasingtheCompleteProgramList.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.21
.21
.21
.21
AdditionalInformation.....................22
LastConditionMemory...................22
ScreenSaver...........................22
Operation
.15-17
OperationwithDVDandVideoCD.
PlayingaDVDandVideoCD...............15
.
.
.
.
.
.
.
GeneralFeatures........................15
MovingtoanotherTITLE...............15
15
Moving to another CHAPTER/TRACK
.
.
.
.
.
Search.............................15
Still Picture and
Frame-by-Frame Playback
.
16
SlowMotion.........................16
VideoModeSetting......................22
22
Controlling other TVs with the remote control
SystemSelect..........................22
.
.
.
Reference
Troubleshooting..........................23
LanguageCodeList.......................24
CountryCodeList.........................25
Specifications............................26
Random...........................16
Repeat............................16
RepeatA-B.........................16
About the
symbols
for instructions
TimeSearch........................16
3DSurround........................16
Indicates hazards
Zoom..............................17
itself
MarkerSearch.......................17
SpecialDVDFeatures....................17
TitleMenu..........................17
DiscMenu..........................17
or
likely to cause
damage.
harm to the unit
other material
Indicates
special operating
Indicates
tips
and hints for
features of this unit.
making
the task easier.
CameraAngle.......................17
.17
ChangingtheAudioLanguage.
.17
ChangingtheAudioChannel.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Subtitles...........................17
3
INTRODUC
Before Use
Playable
Disc-related terms
Discs
Title
The main film content
(8cm/12cmdisc)
or
can
Audio CD
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
play
a
DVD±R, DVD±RW, Kodak
Track
--
--
the conditions of the
recording equipment or the CD-R/RW (or DVD±R/±RW) disc itself,
some CD-R/RW (or DVD±R/±RW) discs cannot be
played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
Notes
(Video
Sections of
on
on
enabling
On
only)
piece
assigned
musical
on a
a
video CD
track number,
you to locate the track you want.
video CD with PBC
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
moving pictures
and still
you to locate the scene you want.
A scene is composed of one or several tracks.
other functions may be added.
Refer also to the instructions supplied with the DVDs
with the
or
and Video CDs. Some DVDs made for business purposes may not be played on the unit.
code of the DVD
player
and DVDs
player is designed and manufactured
4
playback of region "4" encoded DVD software. The region code on the labels of some
DVD discs indicates which type of player can play those
discs. This unit can play only DVD discs labeled "4" or
"ALL". If you try to play any other discs, the message
"Check Regional Code" will appear on the TV screen.
Some DVD discs may not have a region code label even
though their playback is prohibited by area limits.
4
or a
Scene
Types
for
CD and audio CD
picture
audio CD. Each track is
or an
playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be available
This DVD
a
easily.
DVDs and Video CDs
Some
Regional
enabling
you to locate it
Notes
Depending
feature content
(VCD)
(8cm/12cmdisc)
PICTURE CD, SVCD, and CD-R or CD-RW that contains
audio titles, MP3, WMA or JPEG files.
--
accompanying
or
additional feature content, or music album.
Each title is assigned a title reference number
Video CD
(8cm/12cmdisc)
In addition, this unit
(DVD only)
DVD
There
of video CDs
are
two
types of video CDs:
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
Video CDs
PBC
system via
menus, search
functions,
typical computer-like operations. Moreover,
of high resolution can be played if they are
or
still
other
pictures
included in
the disc.
Video CDs not
equipped
with PBC
(Version 1.1)
Operated
way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
in the
same
Before Use
(Continued)
Storing
Precautions
After
the unit
Handling
When
shipping the unit
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
The
When
setting up the unit
The picture and sound of a
nearby TV, VCR, or radio
during playback. In this case, position
may be distorted
the unit away from the TV, VCR,
unit after removing the disc.
To
keep
Do not
near
or
radio,
or
turn off the
volatile
liquids,
contact with the unit for a
leave marks
such
as
on
long period
Cleaning
discs
Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the centure
ter out.
plastic products in
of time. They will
the surface.
soft, dry cloth. If the surfaces
soft cloth
lightly
solution. Do not
benzine,
light, as there may be a considerable temperature
increase inside the car.
insecticide spray,
or
To clean the cabinet
a
store the disc in its case.
the unit
Cleaning
Use
playing,
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
the exterior surfaces clean
use
the unit. Do not leave rubber
use a
discs
or
are
moistened with
a
extremely dirty,
detergent
mild
strong solvents such as alcohol,
thinner, as these might damage the surface
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
records.
vinyl
use
About
Symbols
of the unit.
About the
To obtain
clear
picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Discs
DVD
VCD2.0
Handling
Hold the disc
on
playback side of the disc.
by the edges so that fingerprints
the surface.
Do not stick paper
during operation.
explained in this owner's
that specific DVD video disc.
symbols
screen
for instructions
of the following symbol is
represented by the symbol.
one
to the disc
DVD
Video CDs with the PBC
(playback control)
function.
discs
VCD1.1
Do not touch the
get
on
A section whose title has
applicable only
Notes
symbol display
"
or
tape
on
the disc.
Video CDs without the PBC
(playback control)
function.
will not
CD
Audio CDs.
MP3
MP3 disc.
WMA
WMA disc.
JPEG
JPEG disc.
5
INTRODUC
Front Panel and
Display
Window
POWER
Switches the
player ON
and OFF.
PLAY(N)
playback.
Starts
PAUSE(X)
Pauses playback. Press repeatedly
frame-by-frame playback.
STOP
(
x
for
) Stops playback.
Reverse Scan/Skip ( m / . )
Go to previous chapter / track or to the
beginning.
Press and hold for two seconds for fast
Forward Skip/Scan ( > / M
Go to the next chapter / track.
reverse
)
search.
OPEN/CLOSE(Z)
Opens or closes the disc tray.
Press and hold for two seconds for fast
forward search.
Disc
Tray
Insert
a
disc here.
Display
window
Shows the current status of the
player.
Point the DVD
Display
Remote Sensor
remote control
here.
Player
Window
Indicates current
function
DVD
player
(Play, Pause)
DVD inserted
Indicates repeat mode
CD Audio CD inserted
VCD Video CD inserted
SVCD
Super
MP3 MP3
or
Indicates
Video CD inserted
DTS and
of the current disc.
WMA disc inserted
CHP/TRK
current
Indicates
chapter
or
encoding
Dolby digital
Indicates total
time/elapsed
playing
time
track number
S VCD DVD
CHP
MP3
CD TRK
6
AD
B
ALL
Remote Control
OPEN / CLOSE
Opens
TV Control Buttons
and closes the disc tray.
TV POWER:
POWER
Turns the TV
Switches DVD
Player ON
and OFF.
0-9 number buttons
Selects numbered items in
a menu.
CLEAR
Removes
track number
on
the
program list or a mark
MARKER SEARCH
on
the
a
menu.
SCAN(m/M)
Search backward
or
forward.
PAUSE/STEP(X)
playback temporarily/ press
repeatedly for frame-by-frame
playback.
Pauses
PLAY(N)
playback.
Starts
on or
off.
TV PR/CH +/--:
Selects TV's channel.
INTRODUC
TV VOL +/--:
Adjusts
TV's volume.
AV:
Selects the TV's
source.
SKIP(./>)
Go to next chapter or track.
Returns to beginning of current
chapter or track or go to previous chapter or track.
STOP(x)
Stops playback.
TITLE
title menu, if available.
Displays
DVD MENU
Accesses
menu on a
DVD disc.
bBvV(left/right/up/down)
Selects
-
an
item in the
?
RETURN
Removes the setup menu, disthe video CD with PBC.
plays
menu.
?
ENTER
Confirms
menu
?
selection.
DISPLAY
?
Accesses On-Screen
display.
AUDIO
Selects
an
audio
language (DVD) or
(CD).
audio channel
an
SUBTITLE
Selects
a
subtitle
a
DVD
?
language.
ANGLE
Selects
?
camera
angle
?
SETUP
or removes
setup
MARKER SEARCH
menu.
?
PROGRAM
Places
a
track
on
the program
list.
?
ZOOM
Enlarges
?
video
image.
REPEAT
Repeat chapter, track, title,
all.
?
?
Accesses
point during play-
SEARCH
Displays
if
available
MARKER
Marks any
back.
menu.
A-B
Repeat
?
RANDOM
Plays
?
sequence.
*
tracks in random order.
This button is not available.
7
Rear Panel
COAXIAL
Connect to
(Digital audio out jack)
digital (coaxial) audio equipment.
AUDIO OUT
Connect to
stereo
(Left / Right)
amplifier, receiver,
an
or
system.
VIDEO OUT
Connect to
a
TV with video
inputs.
COMPONENT VIDEO OUT/PROGRESSIVE SCAN
Connect to
a
TV with Y Pb Pr
(Y
Pb
Pr)
inputs.
S-VIDEO OUT
Connect to
a
TV with S-Video
inputs.
OPTICAL DIGITAL OUT
Connect to
(Digital audio out jack)
digital (optical) audio equipment.
AC Power Cord
Plug
Do not touch the inner
rear
permanent damage
Remote Control
Operation
Point the remote control at the remote
sensor
and
press the buttons.
Remote Ccontrol
Battery
Detach the
installation
battery
cover on
the
rear
of
the remote control, and insert two
AAA AAA
batteries
(size AAA)
aligned correctly.
Do not mix old and
mix different
with
new
and
batteries and
types of batteries such
standard, alkaline, etc.
8
pins of the jacks on the
discharge may cause
Electrostatic
panel.
never
as
into the power
to the unit.
source.
Connections
Tips
Depending
Progressive Scan (ColorStream Pro)
If your television is
your TV and other equipment you wish
to connect, there are various ways you could connect
the player. Use only one of the connections
on
video resolution
Please refer to the manuals of your TV, VCR, Stereo
or other devices as necessary to make the
best connections.
reproduction, connect
jacks to the audio in jacks
the
player's
of your
audio/video equipment.
amplifier, receiver, stereo or
See "Connecting to Optional Equipment" on
--
Make
the DVD
directly to the
input channel.
Do not connect the DVD Player's AUDIO OUT jack to
the phono in jack (record deck) of your audio system.
Do not connect your DVD Player via your VCR. The
DVD image could be distorted by the copy protection
sure
Player
1
is connected
--
2
Make
the
one
of the
capabilities
--
following connections, depending
existing equipment.
--
of your
in
jacks on the DVD Player
jacks on the TV using the
to
Connect the Left and
Right AUDIO OUT jacks of
Player to the audio left/right in jacks on the
(A) using the audio cables.
the DVD
Notes
--
to a TV
on
corresponding
Pb Pr cable (C).
TV
system.
Connecting
possible.
PROGRESSIVE SCAN
Y
TV. Tune the TV to the correct video
--
"digital ready"
Connect the COMPONENT VIDEO OUT/
the
page 10.
Caution
or
If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try
Progressive Scan on the DVD Player.
System
For better sound
high-definition
television, you may take advantage of the DVD
Player's progressive scan output for the highest
described below.
AUDIO OUT
a
connection
Set the
Progressive to "On" on the setup
progressive signal, see page 12.
Set the Progressive to "Off" by removing
menu
STOP and hold it for five seconds before
relesasing it.
analog video
for
any disc
from the unit and close the disc tray. See that "no
disc" is displayed on the display window. Then press
does not work with the
Progressive
scan
connections
(yellow VIDEO OUT jack)
or
S-VIDEO
connection.
Video connection
1
2
Connect the VIDEO OUT
the video in
jack
jack on the DVD Player to
using the video cable (V).
the TV
on
Connect the Left and
Right AUDIO OUT jacks of
Player to the audio left/right in jacks on the
(A) using the audio cables.
the DVD
TV
S-Video connection
1
Connect the S-VIDEO OUT
to the S-Video in
cable
2
on
the DVD
using
Player
the S-Video
(S).
Connect the Left and
Right AUDIO OUT jacks of
Player to the audio left/right in jacks on the
(A) using the audio cables.
Component
Video
(Color Stream )
connection
Connect the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN
the
Pr
2
jack
the TV
the DVD
TV
1
jack
on
corresponding
cable (C).
in
jacks on the DVD Player to
jacks on the TV using an Y Pb
Connect the Left and
Right AUDIO OUT jacks of
Player to the audio left/right in jacks on the
(A) using the audio cables.
the DVD
TV
Note
If the TV has
an
S-video
input, connect the DVD player
using an S-video cable,
video
cable.
yellow
with the S-video cable. When
do not connect the
9
PREATION
Connections
Connecting
(Continued)
Optional Equipment
to
Notes
--
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic ll/
Pro Logic
Connect the Left and
DVD
Player to the
amplifier, receiver,
cables (A).
Right AUDIO OUT jacks on the
right in jacks on your
stereo system, using the audio
audio left and
or
Connecting to an amplifier equipped with two
digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2, or DTS)
Connect
one of the DVD Player's DIGITAL AUDIO
jacks (OPTICAL O or COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (optical O or coaxial X) audio cable.
OUT
You will need to activate the
2 (See "Digital
Digital
Audio
Output"
player's digital output.
page 13).
on
Multi-channel sound
A
digital multi-channel
sound quality. For this
connection
provides
the best
you need a multi-channel
Audio/Video receiver that supports one or more of the
supported by your DVD Player (MPEG 2,
Dolby Digital and DTS). Check the receiver manual and
the logos on the front of the receiver.
audio formats
Caution:
Due to the DTS
will be in DTS
Licensing agreement, the digital output
digital out when DTS audio stream is
selected.
Rear of DVD
O
player
X
OPTICAL
A
COAXIAL
DIGITAL INPUT
Amplifier (Receiver)
10
digital output does not match
capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
the
--
--To
see
screen
channel
1
If the audio format of the
R
L
AUDIO INPUT
the audio format of the current DVD in the
display,
press AUDIO.
on-
Before
General
Operation
Temporary
Explanation
This manual
gives basic instructions for operating the
Player. Some DVDs require specific operation or
allow only limited operation during playback. When this
occurs, the symbol
appears on the TV screen, indithat
the
cating
operation is not permitted by the DVD
Player or is not available on the disc.
DVD
On-Screen
General
screen.
playback
1
2
3
CHAPT
TRACK
ALL
AB
OFF
Display
Repeat
Title
Repeat Chapter
Repeat
Track
Repeat
All Tracks
Repeat
A-B
Resume
displayed on the TV
changed on the menu.
can
be
display operation
Press DISPLAY
(non-PBC
Video CDs
(non-PBC
only)
Video CDs
only)
Repeat Off
status can be
Some items
On-screen
TITLE
Feedback Field Icons
Action
play
from this
prohibited
or
point
not available
Notes
Some discs may not
provide all of the features on the
display example shown below.
If no button is pressed for 10 seconds, the on-screen
display disappears.
during playback.
on-screen
Press 3/4 to select
an
The selected item will be
Press 1/2 to
change
The number buttons
numbers
(e.g.,
title
item.
highlighted.
the
can
setting
of
an
item.
be also be used for
number).
press ENTER to execute the
For
some
setting
functions,
setting.
DVD
Items
Function (Press 3/4 to select desired item)
Title Number
1/3
Chapter
Number
1 /12
Time search
0:20:09
Audio language
and Digital Audio
Output
D
mode
Subtitle language
Angle
Sound
VCD2.0
1 ENG
5.1 CH
ABC
Shows the current title number and total number of
to the desired title number.
Numbers ENTER
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
Numbers ENTER
Shows the elapsed playing time, and
searches the point by the elapsed time directly.
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes the setting.
Shows the current subtitles language, and
changes the setting.
1/1
Shows the current angle number and total number of
angles, and changes the angle number.
Shows the current sound mode, and
changes the setting.
1/2,or
1/2,or
Numbers ENTER
1/2,or
AUDIO
1/2,or
SUBTILE
1/2,or
ANGLE
1/2
VCD1.1
Items
Function (Press 3/4 to select desired item)
Track Number
1/4
Time
Shows the current track number, total number of tracks
and PBC On mode, and skip to the desired track number.
0:20:09
Shows the elapsed playing time (Display only)
STER.
Shows the audio channel, and
changes the audio channel.
Audio Channel
Sound
titles, and skips
OFF
NORM.
Selection Method
NORM.
Shows the current sound mode, and
changes the setting.
Selection Method
1
/2,or
Numbers ENTER
--
1
/2,or
AUDIO
1/2
11
PREATION
Before
Initial
You
Operation (Continued)
Picture
Settings
set your own Personal Preferences on the
can
player.
TV
Aspect
nected.
Initial
General
Settings
Operation
The setup
Displays
menu
above and below the
appears.
Scan
is
English
16:9 Wide: Select when
German
Rating
Russian
Disc Audio
4:3
Letterbox
Polish
Disc Subtitle
4:3
Panscan
Hungarian
Disc Menu
16:9 Wide
Code
Aspect
Audio
Country
Chinese
Output
Digital
Press 3/4 to select the desired item.
will show the current
well
as
setting for the
setting(s).
While the desired item is
selected, press 2, then
Press ENTER to confirm
selection.
additional
Press
or
PLAY to exit the
menu.
Language
Language
Progressive Scan
DVD
Disc Audio
Off
Disc Subtitle
On
Disc Menu
original language set for the disc is selected.
Other : To select another language, press number buttons to
enter the corresponding 4-digit number according to the language code list on page 24. If you enter the wrong language
:
The
Rating
Country
Aspect
Menu Language
Progressive
Digital
Disc Subtitle
English
Disc Menu
German
Rating
Russian
Code
Language
Progressive
Digital
Polish
Scan
Audio
Output
Caution
Italian
French
Once the
setting for progressive scan output is entered,
image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
Chinese
an
Others
Select
you
to On in error, you must reset the unit.
Language
a
see
1)
for the setup menu. This is the
when you press SETUP.
language
Disc Audio
English
Disc Subtitle
German
Disc Menu
Russian
Rating
Polish
TV
Code
Aspect
Menu
Language
Progressive
12
Scan
Hungarian
Remove any disc from the unit and close the disc
on the display
tray. See that "no disc" is displayed
menu
window.
2)
Country
Output
Others
Other--------
Menu
Scan
Hungarian
Aspect
Menu
Audio
Original
Disc Audio
TV
Code
TV
code, press CLEAR.
Country
DVD
Progressive
provides the highest quality
pictures with less flickering.
If you are using the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks, but are connecting the
DVD Player to a standard (analog) television, set
Progressive Scan to Off.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
Subtitle.
Original
Output
Others
for the disc's Menu, Audio, and
language
Scan
Scan Video
3/4 to select the desired
items
Audio
alternate
3
setting.
your
4 Some
require
steps.
SETUP, RETURN,
5 setup
a
Code
Progressive
as
16:9 wide TV is connected.
Aspect
Menu Language
Other--------
screen
a
TV
Others
selected item,
sides of the
Rating
French
Scan
style (Both
cut
Italian
Language
Progressive
played
off).
back in that
Disc Menu
Digital
con-
bars
conventional TV set is
Disc Subtitle
Menu
Disc
masking
style
picture are
TV
Select
a
with
Original
Country
The
standard 4:3 TV is
images
picture.
connected. The video material formatted in the Pan &
Disc Audio
2
a
theatrical
4:3 Panscan: Select when
Press SETUP.
1
DVD
4:3 Letterbox: Select when
Press STOP and hold it for five seconds before
releasing
it. The video
standard
setting
visible
on a
output will be restored
to the
picture will once again be
conventional analog TV or monitor.
and
a
Before
Operation (Continued)
Sound
Others
Audio
Digital
Output
Each DVD disc has
Set the
of audio output
variety
options.
player's Digital Audio Output according to the
a
type of audio system you
use.
DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM"
The DRC, Vocal, PBC and Auto
be changed.
Play settings
Press 3/4 to select the desired item and press
ENTER. The setting of the selected item is changed
between On and Off.
if you connected the DVD Player's DIGITAL OUT jack to
a Dolby Digital decoder (or an amplifier or other equip-
Disc Audio
DRC
On
Disc Subtitle
Vocal
On
ment with a
Disc Menu
PBC
Rating
Auto
Dolby Digital decoder).
Stream/PCM: Select "Stream/PCM" if you connected
the DVD Player's DIGITAL OUT jack to an amplifier or
other
DTS decoder,
MPEG decoder.
equipment
decoder
or
with
a
PCM: Select when connected to
a
Country
TV
Dolby Digital
recorded
on the Dolby Digital, MPEG1,
recording system.
Disc Audio
DOLBY
DIGITAL
Disc Subtitle
Stream/PCM
Disc Menu
PCM
digital
or
MPEG2
/PCM
Rating
Country
Code
TV
Aspect
Menu Language
Progressive
Digital
Scan
Audio
Language
Digital
amplifier.
player outputs sounds in the
PCM 2ch format when you play a DVD video disc
Sample Freq.
48 KHz
96KHz
Output
Off
Code
Progressive
2-channel
On
Play
Aspect
Menu
The DVD
stereo
can
Scan
Audio
Output
Others
Dynamic Range Control (DRC)
With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation
thanks to
possible,
digital
audio
technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the
quietest ones). Then, you may
losing clarity
at a lower volume without
listen to
a
movie
of sound. Set
DRC to On for this effect.
Others
Vocal
Sample Frequency
To
Sample Frequency setting, first select
the desired Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is
made, this unit will automatically convert any 96KHz
signals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
made, this unit will pass each type of signal through
without any further processing.
change
the
Set Vocal to On
only
DVD is
The karaoke channels
playing.
when
a
multi-channel karaoke
on
the disc will
mix into normal stereo sound.
PBC
Set
Playback Control (PBC)
On: Video CDs with PBC
are
Off: Video CDs with PBC
are
to On or Off.
played according to the PBC.
played the same way as Audio
CDs.
Auto
You
Play
can
ically
set up the DVD
starts
If Auto
Play
search
a
play
DVD
playing
Player
so a
DVD disc automat-
whenever the DVD is inserted.
mode is set to On, this DVD player will
playback time is long most and then
title that
back the title
automatically.
On: Auto
Off:
Play function is activated.
Auto Play function is not activated.
Note
The Auto
Play
function may not work for
some
DVDs.
13
PREATION
Before
Operation (Continued)
Parental Control
Rating
DVD
Enter the code of
DVD
Movies on DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain
Code
Country
the disc. These
scenes on
scenes are
8
Disc Subtitle
7
Disc Menu
6
are
Rating
Country
TV
Country
TV
Code
Menu
Progressive
Digital
Digital
1
1
Country
the setup
Output
Change
Others
Code
using
Country
2
step
3
Select
4
Shift
5
6 selection,
1
"Rating"
on
the
Setup
menu
using
the
3/4 buttons.
3 of
the
"Rating"
While
3
When you have not entered a password yet.
Enter a 4-digit password using the numbered but-
"Rating"
is selected, press 2.
tons to create a
personal 4-digit security password.
then press ENTER. Enter the 4-digit password
again and press ENTER to verify.
When you have already entered a password;
Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security password, then press ENTER.
Select
a
rating from 1
(1) has the
tons. One
unless
an
the code is
Changing
the
4-digit
code
Enter the
new 4-digit code, then press
exactly the same code a second
fy by pressing ENTER.
ENTER.
5
Enter
time and veri-
6
Press SETUP to exit the
scenes
scene
scenes
will not be
is available
same
Press ENTER to confirm your
14
is necessary when
the 4-digit code"
4
using the 3/4 butplayback restrictions.
playback restrictions.
not
on
rating
played
If you
If you
1-2 as shown above to the left
forget your 4-digit
forget
your
(Rating).
menu.
password,
code
to clear the current pass-
the disc.
1
Press SETUP to
or a
2
Use the Number buttons to enter the
display
the setup
menu.
6-digit
number
"210499".
The
4-digit password is cleared.
display for a moment.
3
rating selection,
to exit the menu.
Steps
word, follow the procedure below.
no
5 then press SETUP
4-digit password
changed (see "Changing
below.).
suitable alternative is found, playback will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
one.
If
Note
Confirmation of the
to 8
The alternative must have the
lower
Press ENTER to confirm your country code
then press SETUP to exit the menu.
least
rated
alternative
button and select the
3/4 buttons.
3
1 to 8: Some discs contain
played. Higher
the 3/4 buttons.
Enter the old code, then press ENTER.
Select Change using 3/4 buttons then press
ENTER.
suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will
be
using
Follow
Unlock: If you select Unlock, Parental Control is
not active. The disc will play in full.
Ratings
left.
1
has the most
Eight (8)
using 2
using
on
2
If you make a mistake before pressing ENTER, press
CLEAR and enter 4-digit security password again.
4
cursor
second character
2
on
Code is selected, press 2.
the first character
Select
the 3/4 buttons
menu.
Follow
Unlock
Output
Select
While
2
Scan
Audio
Scan
Audio
Others
3
Language
Language
Progressive
4
Aspect
Code
Aspect
Menu
5
Rating
US
Disc Menu
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Disc Audio
were
Code Set
Disc Subtitle
The Parental Control feature allows
country-dependent.
whose standards
country/area
Disc Audio
rated
from 1 to 8, and alternatively, more suitable scenes
available for selection on some discs. Ratings are
a
used to rate the DVD video disc, referring to the list
(See "Country Code List", page 25.).
Enter
a new
code
as
"P CLr" appears
shown above to the left
on
the
(Rating).
Operation
Playing
with DVD and Video CD
Playback Setup
Turn
on
General Features
DVD and Video CD
a
DVD
VCD2.0
the TV and select the video
nected to the DVD
Note
VCD1.1
input
source con-
player.
available
Audio system: Turn on the audio system and select
the input source connected to the DVD player.
1
Unless stated otherwise, all operations described
the remote control. Some features may also be
Moving
Press OPEN/CLOSE to open the disc tray.
When
Load
your
2 playback
chosen disc in the tray, with the
Press OPEN/CLOSE to close the tray.
appears on the TV screen, and
If
playback
press PLAY.
In some cases, the disc
disc has
playback
does not start,
Moving
The
might
When
is
loading
a
DVD
Use the 1 234 buttons to select the title/chapter you
want to view, then press ENTER to start playback.
Press TITLE
or
title, you
can move
to
num-
to another CHAPTER/TRACK
a
title
1 /12
DVD MENU to return to the
on a
more
chapter/track
displayed
may be displayed first after
Video CD which offer a menu.
or
one
1/3
appear
menu screen
DVD
than
more
1/3
DVD
follows:
as
VCD1.1
DVD
menu
disc has
a menu screen
menu.
Press DISPLAY, then press the appropriate
(0-9) to select a title number.
instead.
If
Setup
bered button
3 READING
automatically.
a
the
to another TITLE
another title
side down.
starts
on
use
menu
disc has
than
as
one
more
than
track, you
one
chapter
can move
or a
to another
follows:
Press SKIP .
or > briefly during
playback to select the next chapter/track or to return
to the beginning of the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
press DISPLAY. Then, press 3/4 to select the
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
screen.
VCD2.0
Use the number buttons to select the track you want
to view.
Press RETURN to return to the
Menu
setting
and the exact
menu screen.
operating procedures
for
two-digit numbers, press
(0-9)in rapid succession.
may differ depending on the disc.
Follow the instructions on the each menu screen.
Search
You also may set PBC to Off under setup. See page
13.
1 Press SCAN m
using
the
Note
For
menu
The
player
DVD
will
now
VCD2.0
or
M
the numbered buttons
VCD1.1
during playback.
go into SEARCH mode.
2 Press SCAN m
Notes
--
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
the
4-digit
code must
be entered and/or the disc must be authorized
--
"Parental Control",
DVDs may have a
Your
player
will not
different from your
player is 4 (four).
(see
page 14).
region code.
on
play discs that have a region code
player. The region code for this
or M repeatedly to select the
required speed: mX2, mX4, mX16, mX100
(backward) or MX2, MX4, MX16, MX100
(forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8, (backward) or MX2, MX4, MX8,
(forward).
3 To exit SEARCH mode, press PLAY.
15
OPERATION
with DVD and Video CD
Operation
General Features
Still Picture and
VCD2.0
DVD
Video CDs
(continued)
1 To
Frame-by-Frame playback
VCD1.1
The
2 To
can advance the picture frame-by-frame by pressing PAUSE/STEP repeatedly on the remote control.
VCD2.0
DVD
VCD1.1
2 Press SCAN
Repeat
(m or M) during PAUSE
player will enter SLOW mode.
(m
or
a
the TV
on
screen.
Video CD with PBC, you must set PBC to Off on the
menu to use the Repeat function. See page 13.
Repeat
mode.
speed changes:
a
4. To exit Slow Motion
A-B
A*
T 1/8,
DVD
AB
To repeat
VCD2.0
VCD1.1
OFF
sequence in
a
a
title:
1 Press A-B at your chosen
"
*
A
briefly
appears
2 Press A-B
on
starting point.
the TV
screen.
at your chosen end
again
point.
"A B" appears
briefly on the TV screen, and the repeat
sequence begins ("AsB" appears the display window).
mode, press PLAY (N).
3 To cancel the sequence, press A-B.
Note
Slow motion
Video CDs.
in
playback
Random
reverse
during playback
The "RANDOM" appears
2 To return to normal
possible
>
on
Time Search
in
or
stop mode.
1 Press DISPLAY
screen.
press RANDOM
the TV screen.
again.
play
during Random playback, the
(track) and resumes Random
OnaVideoCDwithPBC,youmustsetPBCtoOffon
to use the Random function. See
TRACK
VCD1.1
ALL
DVD Video Discs
Repeat Chapter/Title/Off
Repeat Chapter icon appears
Repeat
on
the TV
currently playing,
Repeat Title icon appears
on
on
the number buttons to enter
hours, minutes, and
starts from the selected time on the disc. If you enter
playback will continue from the current point.
DVD
VCD2.0
VCD1.1
the TV
the TV
3D SUR
can
produce
five
more
speakers, instead of the
speakers normally required to listen to
multi-
channel audio from
screen.
third time.
screen.
3D Surround effect, which
playback from two
conventional stereo
1 Press DISPLAY
a
a
simulates multi-channel audio
a
2 Use 3
or 4
The sound
a
home theater system.
during playback.
to select the sound
option
will be
option.
highlighted.
3Use1or2totoselect"3DSUR".
To turn off the 3D Surround effect, select "NORM".
16
sec-
in the box.
invalid time,
This unit
screen.
press REPEAT
mode, press REPEAT
Repeat Off icon appears
use
right
3D Surround
REPEAT.
repeat the title
second time.
elapsed playing time of the
OFF
repeat the currently playing chapter, press
2 To
dis-
4 Within 10 seconds, press ENTER to confirm the start
time.
NORM.
-
on-screen
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
Playback
TITLE
CHAPT
The
at
screen.
start time. Enter
required
onds from left to
an
VCD2.0
the
3 Within 10 seconds,
Note
This function only works with DVD Karaoke discs and
video CD without PBC.
DVD
during playback.
on
The Time Search box shows the
the
Repeat
appears
playing
2 Within 10 seconds, press 3/4 to select the Time
Search icon in the on-screen display.
The "-:--:--" appears in the Time Search box.
playback.
menu
-:--:--
current disc.
unit selects another title
the setup
page 13.
0:20:09
DVD
The Time Search function allows you to start
any chosen time on the disc.
VCD1.1
the TV
on
with
playback,
The "NORMAL" appears
Tips
By pressing SKIP
is not
VCD2.0
Karaoke DVD
1 Press RANDOM
The
All icon appears
to select the
M)
Video CD, the Slow
T 1/4 or T 1/2 (forward).
The
a
Repeat mode, press REPEAT a third time.
Repeat Off icon appears on the TV screen.
The
"
3 To exit
screen.
repeat the disc currently playing, press REPEAT
setup
required
speed: t 1/16, t 1/8, t 1/4, or t 1/2 (backward), or T 1/16, T 1/8, T 1/4, or T 1/2 (forward).
The
the TV
3 To exit
On
1 Press PAUSE/STEP (X) during playback.
The recorder will now go into PAUSE mode.
1 To
on
Note
Slow Motion
With
press REPEAT.
currently playing,
Repeat Track icon appears
The
2 You
3 Use the SCAN
repeat the track
second time.
1 Press PAUSE/STEP during playback.
The player will now go into PAUSE mode.
The DVD
Track/All/Off
Repeat
-
or
with DVD and Video CD
Operation
General Features
Zoom
VCD2.0
DVD
(continued)
during playback
or
still
playback
If you press ZOOM repeatedly, the
increases up to six steps.
2 Use the 1 234 buttons to
discs: Menus
to
DVDs may offer menus that allow you to access special
features. To use the disc menu, press DVD MENU.
magnification level
move
the zoomed
through
picture.
the
resume
normal
playback
or
the contents of DVD Video
Checking
activate the Zoom function.
3 Press CLEAR to
return to
paused image.
Then, press the appropriate number button to select
option. Or, use the 1 234 buttons to highlight your
selection, then press ENTER.
Title Menu
1 Press TITLE.
screen.
Note
function may not work for
zoom
2 The
DVDs.
some
VCD2.0
DVD
menu, the menu will appear on the
menu can
remove
list
menu
may appear.
angles, spoken language
chapters for the title.
camera
options,
and
the title menu, press TITLE
again.
VCD1.1
Disc Menu
MARKER SEARCH
1/9
a
Otherwise, the disc
and subtitle
3 To
Marker Search
an
DVD
If the current title has
The
DVD
VCD1.1
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
DVD Features
Special
DVD
1 Press DVD MENU.
You
can
start
playback
from
a
memorized
point. Up
The disc
to
menu
nine points can be memorized.
To enter a mark, follow these steps.
2 To
1
Camera
During disc playback, press MARKER when
playback reaches the spot that you want to
2
Repeat step
on
the TV
briefly.
screen
1 to enter up to nine Marker
points
on a
disc.
To Recall
a
displayed.
the disc menu, press DVD MENU
Angle
If the disc contains
memorize.
The Marker icon will appear
remove
is
DVD
scenes
again.
1/1
recorded at different
camera
angles, you can change to a different camera angle
during playback.
Press ANGLE repeatedly during playback to select
desired angle.
The number of the current
Marked Scene
angle appears
on
the
a
display.
1 ENG
1
disc
During
playback,
The MARKER SEARCH
press SEARCH.
menu
will appear
on
2 Within 10 seconds, press 1/2 to select
number that you want to recall.
a
the
screen.
Marker
3 Press ENTER.
will start from the Marked
Playback
4 To
remove
scene.
the MARKER SEARCH menu, press
SEARCH.
To clear
1
a
During
playback,
The MARKER SEARCH
2
the Audio
Press AUDIO
repeatedly during playback
language or audio track.
to hear a
Changing
the Audio Channel
VCD2.0
Press AUDIO
repeatedly during playback to hear
(STER., LEFT or RIGHT).
different audio
Language
5.1 CH
VCD1.1
a
dif-
ferent audio channel
Marked Scene
disc
D
DVD
Changing
Subtitles
press SEARCH.
menu
will appear
on
the
screen.
Press 1/2 to select the Marker number that you want
DVD
ABC
1 ENG
Press SUBTITLE repeatedly
different subtitle languages.
during playback
to see the
to erase.
3
Press CLEAR.
The Marker number will be erased from the list.
4
Repeat steps
5
To remove the MARKER SEARCH menu, press
SEARCH.
Note
If
appears, the feature is not available
on
the disc.
2 and 3 to erase additional Marker
numbers.
17
OPERATION
with Audio CD and MP3/WMA Disc
Operation
Playing an Audio CD and
MP3
CD
The DVD
MP3/WMA Disc
Notes
MP3/WMA
Insert
play
Recordings
files that have
The
player
can
not read an MP3 file that has a file
extension other than
".mp3".
a
About
An WMA file is
JPEG
Press 3/4 to select the MP3/WMA then press
ENTER.
The MP3/WMA menu appears on the TV screen.
1.
2.
4.
Program
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Clear All
Folder8
5.
OFF
00:00
Microsoft audio
Media
3
4
Press 3/4 to select
ENTER.
compatibility
track then press PLAY
or
move
is
-
-
CD Creator", which creates an ISO9660 file system.
single session disc requires MP3/WMA files in the
A
6.
File
no
MP3/WMA file in the 1st
or use a new one.
names
and must
should be named
incorporate ".mp3"
e.g. "********.MP3"
the current track's elapsed playing
time will appear on the display window and menu.
Playback will stop at the end of the disc.
Press DVD MENU to
player
track, it cannot playback MP3/WMA files. If you wish
to playback MP3/WMA files, format all the data in
Playback starts.
During playback,
Press TITLE to
with this
follows:
Sampling Frequency / only at 44.1kHz (MP3),
44.1kHz (WMA)
Bit rate / within 32 320kbps (MP3),
32
128kbps (WMA)
CD-R physical format should be "ISO 9660"
If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
"Direct-CD" etc., it is impossible to playback
MP3/WMA files. We recommend that you use "Easy-
the disc
a
offers double the audio
the MP3 format.
first track. If there is
Press 3/4 to select a folder, and ENTER.
A list of files in the folder appears.
Audio)
compression
-
3.
MP3 WMA
as
22.05
to the MP3/WMA-JPEG
move
a
MP3/WMA Disc
limited
Press RETURN to
choice menu.
WMA(Window Media Audio)
technology.
WMA(Windows
compression of
MP3 WMA
2
compressed by using the
layer-3 file-coding scheme. We call
the ".mp3" file extension "MP3 files".
MPEG1 audio
right.
on
disc and close the tray.
Audio CD; Audio CD menu appears on the TV
screen go to step 4.
MP3/WMA disc; The MP3/WMA-JPEG choice
menu appears on the TV screen. Go to step 2
1
Recordings
An MP3 file is audio data
MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW discs.
Before playing MP3/WMA recordings, read the notes on
can
MP3/WMA
About MP3
WMA
Player
on
or
using
or
8 letters
or
less
".wma" extension
"********.WMA".
7.
Donotusespecialletterssuchas"/:*?"<>"etc.
8.
Total number of files
on
the disc should be less than
650.
to the next page.
move
to the
previous page.
This DVD
player requires discs/recordings
to meet
certain technical standards in order to achieve
Program
CD
Program
MP3 WMA
TRACK01
TRACK02
TRACK 1.mp3
TRACK03
TRACK 2.mp3
TRACK 5.mp3
TRACK06
TRACK 6.mp3
TRACK07
TRACK 7.mp3
Clear All
TRACK08
STER.
NORM.
Audio CD
menu
0: 56: 18
Clear All
TRACK 8.mp3
00:00
1
If you
are
use
MP3/WMA
in
return to the
To
5
18
a
menu
file list and want to return to the Folder
the 3/4 to
and
highlight
previous menu screen.
stop playback
at any other
optimal
automatically
types
(including CD-R containing
MP3 or WMA files). That require certain pre-existing
conditions (see above) to insure compatible playback.
OFF
Tip
list,
are
of recordable disc formats
TRACK 4.mp3
TRACK05
Pre-recorded DVDs
set to these standards. There are many different
TRACK 3.mp3
TRACK04
playback quality.
press ENTER to
time, press STOP.
Customers should also note that
required
permission
is
in order to download MP3/WMA files and
music from the Internet. Our company has no
grant such permission. Permission should
to
always
be
sought
from the
copyright
owner.
right
Operation
Pause
with Audio and MP3/WMA Disc
MP3
CD
1 Press PAUSE/STEP
WMA
Repeat
during playback.
2 To return to
playback,
PAUSE/STEP again.
press PLAY
or
MP3
CD
WMA
or
>
Press SKIP . twice
vious track.
step back
briefly
to
to return to the
to the pre-
of audio CD, to go directly to any track, enter
using the numbered buttons (0-9)
the track number
during playback.
Repeat Track/All/Off
"
appears
on
the
at your chosen end
again
menu screen.
point.
MP3
CD
3 To exit the sequence and return to normal
A-B again.
The
3D Surround
This unit
WMA
more
Repeat icon and "TRACK" appears
the
on
Repeat icon and "OFF" appears
can
on
the
screen,
play,
CD
produce
a
3D Surround effect, which
speakers normally required
channel audio from
1 Press DISPLAY
menu
press
menu screen.
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five
repeat the track currently playing, press REPEAT.
The
2 Press A-B
*
Repeat icon and "A B" appears on the menu
and the sequence begins to play repeatedly.
briefly during
or
1 To
Repeat icon and "A
The
playback to go to the next track
beginning of the current track.
case
CD
ing point.
to another Track
Press SKIP .
In
A-B
To repeat a sequence.
1 During disc playback, press A-B at your chosen start-
press
The
Moving
(Continued)
a
or
to listen to multi-
home theater system.
during playback.
screen.
2 To
repeat all tracks
on a
disc, press REPEAT
2 Use 1
a sec-
ond time.
The
"ALL" appears
Repeat icon and
on
the
or
The sound
2 to select the sound
option
will be
option.
highlighted.
3Use3or4totoselect"3DSUR".
menu screen.
To turn off the 3D Surround effect, select "NORM".
3 To cancel
The
Repeat mode, press REPEAT a third time.
Repeat icon and "OFF" appears on the menu screen.
Search
1 Press SCAN m
The
player
MP3
CD
will
now
or
M
Changing
the Audio Channel
CD
Press AUDIO repeatedly during playback to hear a
different audio channel (STER., LEFT, or RIGHT).
WMA
during playback.
go into SEARCH mode.
2 Press SCAN m
or M repeatedly to select the
required speed: mX2, mX4, mX8 (backward)
MX2, MX4, MX8 (forward).
Search speed and direction
are
indicated
on
the
or
menu
screen.
3 To exit SEARCH mode, press PLAY.
Random
MP3
CD
1 Press RANDOM
WMA
during playback
or
when
playback
is
stopped.
The unit automatically begins Random
"RAND." appears on the menu screen.
Playback
and
playback, press RANDOM repeatdisappears on the menu screen.
2 To return to normal
edly
until "RAND."
19
OPERATION
Operation
Viewing
with JPEG Disc
JPEG disc
a
Moving
JPEG
Player can play discs with JPEG files and
Kodak picture CD. Before playing JPEG recordings,
read the notes on JPEG Recordings on right.
This DVD
Insert
1
a
or
>
appears
on
during viewing a picture
previous file.
Still Picture
1 Press PAUSE/STEP
menu
once
to advance to the next file or to the
disc and close the tray.
The MP3/WMA-JPEG choice
TV
to another File
Press SKIP .
the
screen.
slide show.
during
go into PAUSE mode.
2 To return to the slide show, press PLAY or press
PAUSE/STEP again.
The
player
will
now
MP3 WMA
To
JPEG
2
menu
appears
on
the TV
picture
Press 3/4 during showing a picture
picture horizontally or a vertically.
Press 3/4 to select the JPEG then press
ENTER.
The JPEG
the
flip
To rotate
screen.
Press 1/2
JPEG
picture
Folder1
Folder2
to
flip
the
picture
during showing
clockwise
or
a
picture
to rotate the
counter clockwise.
Folder3
Folder4
Folder5
Notes
Folder6
Folder7
on
JPEG
Recordings
Folder8
Slide
Speed
Depending
Off
upon the size and number of the JPEG
a long time for the DVD player to
files, it could take
Press 3/4 to select
and ENTER.
3 A list of files in the folderfolder,
appears.
Press RETURN to
choice menu.
a
move
to the MP3/WMA-JPEG
If you
are
in
a
file list and want to return to the Folder
the 3/4 buttons
the remote to
on
highlight
and press ENTER to return to the
"
previous
menu screen.
If
want to view
you
4 highlight
a
particular file, press
file and press ENTER
the file proceeding starts.
a
or
Viewing
During viewing a file, press RETURN
the previous menu (JPEG menu).
Press TITLE to
3/4 to
PLAY.
to move to
Picture1.jpg
Picture2.jpg
Picture3.jpg
Picture4.jpg
Picture5.jpg
Picture6.jpg
Picture7.jpg
1024X768
Slide
Speed
5/32
Off
1024X768
Picture5.jpg
Tip
are three viewing Slide Speed options: Fast,
Normal, Slow, and Off. Press 1/2 to highlight the Slide
There
Speed
then press 3/4 to select the
option
you want to
use, and press ENTER.
To
at
other time, press STOP.
viewing
any
5 Thestop
JPEG
appears.
menu
20
---
reduce the resolution of the JPEG files
pixels
and burn another disc.
on
the disc should
be less than 650.
Some disc may be incompatible due to different
recording format or condition of disc.
When you are using software such as "Easy CD
Creator" to burn the jpeg files into the CD-R, ensure
that all the selected files have the ".jpg" extensions
when
copying
rename
File
move
Folder1
5/32
big
into the CD
layout.
If the files have
to the next page.
Press DVD MENU to move to the previous page.
JPEG
too
Total number of files and folders
use
"
are
to less than 2 mega
Tip
list,
read the disc's contents. If you don't see an ondisplay after several minutes, some of the files
screen
them
".jpg" extension will not be able to
player. Even though the files are
JPEG image files in windows explorer.
names
be read
shown
by
as
".jpe" or ".jpeg" extensions, please
as ".jpg" files.
without
this DVD
Programmed Playback
CD
VCD2.0
with Audio CD
Programmed Playback
function enables you to store your favorite
tracks from any disc in the player memory.
Program
Program
with Video CD
Note
On
a
setup
Video CD with PBC, you must set PBC to Off on the
menu to use the Program function. See page 13.
contain 30 tracks.
can
Press PROGRAM
1
WMA
Programmed Playback
and MP3/WMA Disc
The
MP3
VCD1.1
mode to enter the
during playback or in
Program Edit mode.
the stop
E
The
mark will appear to the right of the word
on the right side of the menu screen.
Program
OPERATION
Insert Video CD and close the tray.
1
2
Press PROGRAM while
The VCD
Program
menu
is
playback
stopped.
will appear.
Program
VCD
E
TRACK 1
TRACK 2
Note
TRACK 3
Press PROGRAM to exit the
Program
TRACK 4
Edit mode;
TRACK 5
TRACK 6
E
the
mark will
Select
2
disappear.
TRACK 7
track, then press ENTER
a
selected track
the
on
Clear All
TRACK 8
Program
to
place
the
list.
Note
2 to
Repeat step
Program list.
3
place
E
Program
CD
additional tracks
the
Program
MP3 WMA
TRACK 1
TRACK 12
TRACK 2
TRACK 8
TRACK 1.mp3
TRACK 3
TRACK 10
TRACK 2.mp3
TRACK 4
TRACK 3
TRACK 3.mp3
TRACK 7
TRACK 7.mp3
Clear All
TRACK 8
0: 56: 18
STER.
Audio CD
00:00
To repeat the track
programmed track you selected last is highlighted
on
Press 3/4 to select the track you want to start
5 playing.
left.
from
on
the TV
Tracks
currently playing,
Repeat icon and "TRACK" appears
The
screen.
press REPEAT.
on
the
menu
screen.
To repeat all tracks on the program list, press
REPEAT a second time.
Repeat icon and "ALL" appears on the menu screen.
Repeat mode, press REPEAT a third time.
The Repeat icon and "OFF" appears on the menu screen.
The
Press TITLE to
to the next page.
Press DVD MENU to move to the previous page.
move
Press PLAY to start.
6 Playback begins
in the order in which you programmed
the tracks and "PROG." appears on the menu screen.
Playback stops after all of the tracks
have played once.
To resume normal
playback,
on
normal
Repeat Programmed
menu
the program list.
7
resume
The "NORMAL" appears
OFF
Press 2.
The
steps 2-6 of "Programmed Playback with
Audio CD and MP3/WMA disc"
To
Clear All
3
MP3/WMA
menu
menu.
playback
4 programmed playback,
press PROGRAM.
TRACK 3.mp3
TRACK 8.mp3
NORM.
Program
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
Follow
PROGRAM to exit the
or
TRACK 2.mp3
TRACK 4.mp3
TRACK 6
Press RETURN
3
E
TRACK 8.mp3
TRACK 5
4
on
select
a
playback
on
the
Program list
programmed
(or MP3/WMA) list
and then press ENTER.
"PROG." indicator disappears
on
the
Erasing
a
menu screen.
Track from
Program
List
1 Press PROGRAM
MP3/WMA disc
Program
from
track of CD
To cancel
E
The
during playback (Audio CD and
only) or in the stop mode to enter the
Edit mode.
mark will appear.
2 Press 2 to
move
to the
Program
list.
3 Use 3/4 to select the track that you wish to
from the Program list.
erase
4 Press CLEAR.
The track will be erased from the
Erasing
the
1 Follow
steps
List"
as
Program list.
Complete Program
1-2 of
"Erasing
a
List
Track from
Program
above.
2 Use 3/4 to select "Clear All", then press ENTER.
The
complete Program for the disc
The programs
are
will be erased.
also cleared when the disc is removed.
21
Additional Information
Last Condition
DVD
This
CD
player
remote control
memorizes the
settings
user
for the last disc
that you have viewed. Settings remain in memory even
if you remove the disc from the player or switch off the
player.
If you load
a
disc that has its
settings
Notes
--
You
control the sound level,
can
Settings are stored in memory for use any time.
This player does not memorize settings of a disc if
you switch off the player before commencing to play
You
control the sound level,
can
Screen Saver
picture
screen saver
Player
in
appears when you leave the
holding down TV POWER button, press the
number buttons to select the manufacturer code for
While
1
2
for about five
If
minutes, the DVD
turn itself off.
them
Player
(see
the table
below).
Release TV POWER button.
After the Screen Saver has been
will
source, and
Code numbers of controllable TVs
stop mode for about five minutes.
engaged
automatically
input
code.
your TV
DVD
and
remote
power switch of non-LG TVs as well. If your TV is listed
in the table below, set the appropriate manufacturer
it.
The
input source,
supplied
power switch of your LG TV with the
control.
memo-
rized, the latest stop position is automatically recalled.
--
other TVs with the
Controlling
Memory
VCD1.1
more
than
one
one
code number is listed, try
entering
at a time until you find the one that works with
your TV.
Video Mode
VCD2.0
DVD
Setting
Manufacturer
Code Number
VCD1.1
LG / GoldStar
1
With certain discs, the
playback picture may be flickering or Dot Crawl is shown on straight lines. That
means Vertical interpolation or De-interlace is not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
(Default),
Zenith
1,3,4
Samsung
6,7
Sony
8,9
Hitachi
4
2
video mode.
Note
the video mode, press and hold DISPLAY
about 3 seconds during disc playback. The new video
To
change
mode number selected is
the TV
displayed
quality has improved.
procedure until picture quality
on
your TV, some or all buttons may not
the TV, even after entering the correct
manufacturer code.
Depending
function
screen.
Check whether the video
If not,
repeat the above
is
If you enter a new code number, the code number
entered will be erased.
previously
improved.
Video mode
MODE1
→
change
MODE2
→
When you replace the batteries of the remote, the
code number you have set may be reset to the
sequence:
MODE3
→
MODE1
default
If you turn off the power, the video mode will be back
to initial state (MODE1).
setting. Set
or
video
Descriptions
for Video Modes
material of the DVD video
material
(film
material) is determined from disc information.
source
the
appropriate
Select
You must select the
appropriate system mode for your
If
NO
DISC
system.
appears in the display window,
press and hold PAUSE on the front panel for more than
TV
MODE2: Suitable for
5 seconds to be able to select
material recorded
(PAL, NTSC,
MODE3:
playing film based content or video based
by the progressive scan method.
Suitable for playing video based content with compar-
atively little motion.
code number
again.
System
Detailed
MODE1: The
on
on
?
or
a
system
AUTO).
When the selected system does not coincide with the
system of your TV, normal color picture may not be
displayed.
AUTO:
Note
The video mode
setting only
works when the
Scan mode is set to "On" in the
Setup
menu.
Progressive
Select when DVD
NTSC:
is connected with
Select when DVD
player
is connected with
player
is connected with
NTSC-TV.
PAL:
Select when DVD
PAL-TV.
22
player
Multi system TV.
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
problem
before
service.
contacting
Cause
Symptom
Correction
No power.
The power cord is disconnected.
the power cord into the wall outlet
Plug
securely.
The power is on, but
the DVD player does
No disc is inserted.
Insert a disc. (Check that the DVD or,
audio CD indicator in the display
window is lit.)
not work.
No
The TV is not set to receive DVD
picture.
signal
output.
Select the
the TV
on
player
appropriate video input mode
the picture from the DVD
so
appears
on
the TV
Connect the video cable
The video cable is not connected
screen.
securely.
securely.
No sound.
The connected TV power is turned off.
Turn
The Progressive Scan is set to "On" on
the setup menu but is connected to a
standard(analog) television.
Set
The equipment connected with the
audio cable is not set to receive DVD
Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
signal output.
The audio cables
are
not connected
on
the TV.
Progressive Scan
(see page 12).
to "Off"
Connect the audio cable
securely.
securely.
The power of the equipment connected
with the audio cable is turned off.
The
Digital Audio Output
position.
is set to the
playback picture
is
The disc is
on
the
equipment
connected with
Set the
Digital Audio Output to the
position, then turn on the DVD
player again by pressing POWER.
correct
wrong
The
Turn
the audio cable.
Clean the disc.
dirty.
poor.
The DVD
not start
player does
playback.
No disc is inserted.
Insert a disc. (Check that the DVD, or
audio CD indicator in the DVD display is
lit.)
An
unplayable
disc is inserted.
Insert
a
playable
disc.
the disc
(Check
type, color system, and Regional code.)
The disc is
placed upside
The disc is not
The remote control
does not work
properly.
placed
Place the disc with the
down.
down.
within the
guide.
playback
Place the disc on the disc tray
inside the guide.
The disc is
dirty.
Clean the disc.
The
level is set.
Cancel the Rating function
the rating level.
Rating
The remote control is not pointed at the
remote sensor of the DVD player.
correctly
change
Point the remote control at the remote
of the DVD player.
sensor
the remote control within 23 ft
The remote control is too far from the
DVD player.
Operate
(7 m).
There is an obstacle in the path of the
remote control and the DVD player.
Remove the obstacle.
The batteries in the remote control
exhausted.
Replace
are
or
side
the batteries with
new ones.
23
OPERATION
Language Code
Enter the
(See
appropriate
12).
List
code number for the initial
settings
"Disc Audio", "Disc Subtitle" and/or "Disc Menu"
page
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Ameharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Rumanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volap k
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
24
Country Code
Enter the
appropriate
List
code number for the initial
setting "Country Code" (See
page
14).
Code
Country
Code
Country
Code
Country
Code
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Country
Seychelles
AE
United Arab Emirates
ES
Spain
LI
Liechtenstein
SD
Sudan
AF
ET
Ethiopia
LK
Sri Lanka
SE
Sweden
AG
Afghanistan
Antigua and Barbuda
FI
Finland
LR
Liberia
SG
Singapore
AI
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
(European
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
MK
Macedonia
ST
Saint Tome and
AZ
Azerbaidjan
GF
Georgia
French Guyana
ML
Mali
SU
Former USSR
BA
Bosnia-Herzegovina
GH
Ghana
MM
El Salvador
Barbados
GI
Gibraltar
MN
Myanmar
Mongolia
SV
BB
SY
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
MR
Mauritania
TF
BH
Bahrain
GQ
Guadeloupe (French)
Equatorial Guinea
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
TN
Tunisia
BS
Bahamas
GY
MZ
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
Malaysia
Mozambique
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
Georgia
& S. Sandwich
(USA)
Mayen
Islands
Republic
Principe
French Southern
Territories
(French)
Tobago
BZ
Belize
HR
Croatia
NG
Nigeria
TW
Taiwan
CA
Canada
HT
Haiti
NI
Nicaragua
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
CF
(Keeling) Islands
Central African Republic
ID
Indonesia
NO
Norway
UG
Uganda
CG
Congo
IE
Ireland
NP
Nepal
UK
United
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA Minor
CI
Ivory Coast
IN
India
NU
Niue
CK
Cook Islands
IO
British Indian Ocean
NZ
New Zealand
US
United States
CL
Chile
Territory
OM
Oman
UY
Uruguay
CM
Cameroon
IQ
Iraq
PA
Panama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
Polynesia (French)
Papua New Guinea
CS
Former Czechoslovakia
JM
Jamaica
PH
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape Verde
JP
Japan
PL
Poland
VI
Virgin Islands (British)
Virgin Islands (USA)
CX
Christmas Island
KE
Saint Pierre and
VN
Vietnam
Cyprus
KG
Kenya
Kyrgyzstan
PM
CY
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia
PR
Puerto Rico
WF
Wallis and Futuna Islands
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
Republic
Germany
Djibouti
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
DE
Anguilla
Kingdom
Outlying
Islands
Miquelon
City State
Grenadines
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman Islands
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
Republic
(French)
25
REF NC
Specifications
General
Power
Power
requirements
AC 110-240V
consumption
12W
Dimensions
Mass
(approx.)
,
50/60 Hz
430x39x242mm(WxHxD)withoutfoot
2.2
(approx.)
kg
Operating temperature
5˚C to 35˚C
Operating humidity
5%to90%
System
Laser
Semiconductor laser,
Signal system
PAL/NTSC
Frequency
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
response
wavelength
650
nm
CD:8Hzto20kHz
ratio
Signal-to-noise
(ANALOG OUT
More than 100dB
Harmonic distortion
Less than 0.008%
Dynamic
More than 100 dB
range
More than 95 dB
connectors
only)
(DVD)
(CD)
Outputs
VIDEO OUT
1
Vp-p
75
Ω, sync negative, RCA jack
x
1
S-VIDEO OUT
(Y)
(p-p),
(C)0.3V(p-p)75Ω
COMPONENT VIDEO OUT
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
Audio output
(digital audio)
0.5V(p-p),75Ω,RCAjackx1
Audio output
(optical audio)
3 V
Audio output
(analog audio)
2.0Vrms(1KHz,0dB),600Ω,RCAjack(L,R)x1
1.0 V
75
(p-p),
75
Ω, negative sync, Mini DIN 4-pin
Ω, Optical
connector
x
x
x
1
1
1
Accessory
Videocable.......................1
Audiocable.......................1
Remotecontrol....................1
Batteries.........................2
Design
and
specifications
are
Manufactured under license from
subject
to
change
without notice.
Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol
Laboratories.
DTS and DTS Digital Out
26
are
registered trademarks of Digital Theater Systems,
Inc.
are
trademarks of
Dolby
12
MONTH
GUARANTEE
The
Express
This specifically covers replacement and repair of any
defective componentry or faults in manufacture for the
Guarantee Decal above.
period specified in the
However,
accepts no liability where any goods
fail to comply with this express guarantee because of
control.
any reasons beyond
at no
Faulty components will be replaced by
cost to the owner. Similarly all workshop labour costs
needed to restore the goods to their original working
condition will be met by
during the guarantee
Guarantee
This applies to work done in any approved
Service Centre and specifically excludes travel
time, freight or any other related charges.
The conditions of this Express guarantee only
apply if repairs are carried out by an approved
Service Centre in New Zealand.
guarantee is not transferrable except as
provided by the Consumer Guarantee Act 1993.
This
period.
Express
Guarantee Service
guarantees the continued supply of spare parts for a period after the date of manufacture of not less than
5 years for electrical components and 3 years for cabinet and other cosmetic components.
If there is any conflict between this
Act 1993, the provisions of the Act shall
P/NO
:
Express Guarantee
apply.
and the
provisions of the Consumer Guarantee
Model No:
Date Purchased:
Serial No:
Purchased from:
3834RD0019J
Download PDF