LG | DZ9811P | LG DZ9811P Owner’s Manual

DZ9811CPD_NA4NRL_ENG
DVD
Player
OWNER'S MANUAL
MODEL: DZ9811P
Before
connecting, operating or adjusting this product, please
instruction booklet carefully and completely.
read this
12
MONTH
GUARANTEE
P/NO
:
3834RD0065S
Safety
Precautions
CAUTION
CAUTION
appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no
additional outlets or branch circuits. Check the specification page of this owner's
CAUTION: THESE SERVICING INSTRUCTIONS ARE FOR USE BY
manual to be certain.
SERVICE PERSONNEL ONLY. TO REDUCE THE RISK
Do not overload wall outlets. Overloaded wall
OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING
outlets, extension cords, frayed power cords,
OTHER THAN THAT CONTAINED IN THE OPERATING
INSTRUCTIONS UNLESS YOU ARE
QUALIFIED
insulation
TO DO SO.
the apparatus.
on
outlets, loose
or
damaged
or
or
wall
damaged
cracked wire
dangerous. Any of these conditions could result in
electric shock or fire. Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact
replacement part by an authorized servicer.
Caution: The apparatus should not be exposed to water (dripping or
splashing) and no objects filled with liquids, such as vases, should be
placed
the Power Cord
Most
RISK OF ELECTRIC SHOCK
DO NOT OPEN
QUALIFIED
concerning
are
Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to
plugs,
CAUTION: This
To
maintenance,
Use of
contact
an
This number is
requested
purchase.
authorized service center.
controls, adjustments,
or
the
performance
of
procedures
Serial No.
enclosure. Visible laser radiation when open. DO NOT STARE INTO
BEAM.
a
bookcase
or
in
a
unique
to
on
confined space such
as
similar unit.
2
appliance.
the bottom of this unit.
this unit and not available to others. You should record
information here and retain this
Model No.
specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the
equipment
where the cord exits the
guide
as a
permanent record of your
other
than those
WARNING: Do not install this
point
SERIAL NUMBER: The serial number is found
owner's manual
proper
and retain for future reference. Should the unit require
ensure
carefully
product employs a Laser System.
use of this product, please read this
wall outlets, and the
___________________________________
___________________________________
Table of Contents
Introduction
SafetyPrecautions......................................................2
PlayinganAudioCDandMP3/WMADisc..................................13
MP3/WMAdisc compatibilitywiththisplayerislimitedasfollows
.13
TableofContents.......................................................3
AudioCDandMP3/WMADiscFeatures................................14
BeforeUse..........................................................4-5
?Pause........................................................14
SymbolusedinthisManual...........................................4
AbouttheSymbolDisplay.........................................4
?MovingtoanotherTrack.........................................14
NotesonDiscs.....................................................4
RemoteControlBatteryInstallation.....................................4
?RepeatTrack/All/Normal........................................14
?RepeatA-B...................................................14
MaintenanceandService..............................................5
?Search.......................................................14
TypesofPlayableDiscs..............................................5
ViewingaJPEGdisc...................................................15
?MovingtoanotherFile..........................................15
?Torotatepicture................................................15
.
.
.
.
.
.
.
.
.
?Random......................................................14
FrontPanel............................................................6
RemoteControl........................................................7
?StillPicture...................................................15
SettingupthePlayer...................................................8-9
DVDPlayerConnections..............................................8
AudioConnectiontoOptionalEquipment.................................9
Advanced
.
?Zoom........................................................15
.15
?JPEGdisccompatibilitywiththisplayerislimitedasfollows.
ProgrammedPlayback..................................................16
?ErasingaTrackfromprogramlist..................................16
.
Operations
GeneralFeatures...................................................10-16
Initial
On-ScreenDisplay.................................................10
MovingtoanotherCHAPTER/TRACK.................................10
.
.
.
.
.
.
.
.
.
.
Settings
InitialSettings.................................................17-22
GeneralOperation..................................................17
SlowMotion......................................................10
LANGUAGE.....................................................17
TitleMenu.......................................................10
DISPLAY........................................................18
DiscMenu.......................................................10
AUDIO..........................................................19
ChangingtheAudioLanguage........................................10
LOCK(ParentalControl)..........................................20-21
Search...........................................................10
OTHERS.........................................................22
StillPictureandFrame-by-FramePlayback...............................10
MarkerSearch.....................................................11
Reference
RepeatA-B.......................................................11
Repeat...........................................................11
AdditionalInformation..................................................23
ControllingotherTVswiththeremotecontrol................................23
Troubleshooting.......................................................24
LanguageCodes.......................................................25
Random..........................................................11
Zoom...........................................................12
CameraAngle.....................................................12
AreaCodes...........................................................26
Subtitles.........................................................12
Specifications.........................................................27
ChangingtheAudioChannel..........................................12
LastSceneMemory................................................12
ScreenSaver......................................................12
SystemSelect.....................................................12
3
Introducin
Before Use
To
proper use of this product, please read this
and retain for future reference.
ensure
carefully
owner 's
manual
About the
"
Symbol Display
"
may appear
provides information on the operation and maintenance of
player. Should the unit require service, contact an authorized
on
your LCD
This manual
that the function
your DVD
service location.
specific
DVD video disc.
Notes
on
Used in this Manual
Symbol
constitute
a
The exclamation
operating
alerts you to the presence of
and maintenance / servicing instructions.
Indicates hazards
material
Storing
point
likely
to
cause
After
important
harm to the unit itself
or
on
that
on
side of the disc. Hold the disc
the surface. Never stick paper
by
or
the
tape
edges
on
so
that
the disc.
the disc in its
never
case.
leave it in
a
Do not expose the disc to direct
parked
car
exposed
to
direct
sunlight
sunlight.
or
Discs
Fingerprints
damage.
store
of heat and
Cleaning
other
manual is not available
Discs
playing,
sources
playback
do not get
fingerprints
risk of electric shock.
owner 's
Discs
Do not touch the
lightning flash symbol alerts you to the presence of
dangerous voltage within the product enclosure that may
in this
and indicates
Discs
Handling
The
explained
display during operation
and dust
distortion. Before
on
the disc
playing,
poor picture quality and sound
clean the disc with a clean cloth. Wipe the disc from
can cause
the center out.
strong solvents such as alcohol, benzine, thinner, commercially
available cleaners, or anti-static spray intended for older vinyl records.
Do not
DVD and finalized DVD±R/RW
Video CDs.
Audio CDs.
use
Remote Control
MP3 discs.
Detach the
WMA discs.
batteries (size
JPEG discs.
NOTE
Indicates
special
notes and
operating
features.
TIP
Indicates
tips
and hints for
A section whose title has
to the disc
represented by
battery
making
one
the
the task easier.
of the
following symbols
symbol.
is
applicable only
4
Battery Installation
cover on
AAA) with
the
rear
and
of the remote control, and insert two
aligned correctly.
Before Use (Continued)
Maintenance and Service
Refer to the information in this
Types of Playable Discs
chapter
before
contacting
a
This unit
service
and CD-R
technician.
Video CD, Audio CD, DVD±R, DVD±RW, SVCD,
CD-RW that contains audio titles, MP3, WMA or JPEG files.
plays DVD,
or
Manufactured under license from
Handling
When
Please
"Pro
the
carton
packing materials. If you need to ship
the unit as it was originally packed at
?
Do not
use
volatile
liquids
such
as
?
insecticide spray
near
the unit.
?
?
Do not leave rubber
period
Depending
plastic products in contact with
they leave marks on the surface.
or
of time. since
the unit for
a
long
Do not
damage
Do not
strong solvents such
use
on
as
alcohol, benzine,
or
thinner,
as
these
use a
player
disc drive parts
on
is
are
the
Regional
of
high-tech, precision device. If the optical pick-up lens
dirty or worn, the picture quality could be diminished.
a
operating environment, regular inspection
recommended after every 1,000 hours of
For
details, please
CDs
(e.g., heart-shaped
or
the recorded
since
octagonal)
they
might
the Unit
Maintaining
irregularly shaped
or
DVDs and Video CDs
code
This DVD
Depending
the
playback operations of DVDs and Video CDs may be intentionally
programmed by software manufacturers. This unit plays DVDs and Video CDs
according to disc content designed by the software manufacturer, therefore some
playback features may not be available or other functions may be added.
the surface of the unit.
The DVD
or
Some
player, use a soft, dry cloth. If the surfaces are extremely dirty,
lightly moistened with a mild detergent solution.
use
recording equipment
may result in malfunctions.
the unit
To clean the
soft cloth
the conditions of the
(or DVD±R/±RW) disc itself, some CD-R/RW
(or DVD±R/±RW) discs cannot be played on the unit.
Do not attach any seal or label to either side (the labeled side
side) of a disc.
Notes
Cleaning
on
CD-R/RW
the exterior surfaces clean
Keeping
and the double-D
NOTES
and
original shipping
maximum protection, re-pack
save
Logic",
Laboratories.
the unit
shipping
the unit, for
the factory.
?
the Unit
Dolby Laboratories. "Dolby",
symbol are trademarks of Dolby
contact your nearest
is
"4" encoded DVD software. This unit
If you try to
your
are
player,
screen.
use.
authorized service center.
5
and manufactured for
designed
DVD discs labeled "4"
and
and maintenance
region
player
play
a
or
playback
can play only
"ALL".
DVD with
a
different
the message "Check
region code from
Regional Code" appears on
4
the TV
Introducin
Front Panel
POWER
Switches the
player
ON and OFF.
PLAY(N)
Starts playback.
OPEN/CLOSE(Z)
STOP(x)
Stops playback.
Opens
Disc
or
closes the disc tray.
Tray
Insert
a
disc here.
Remote Sensor
Point the DVD
Player remote
control
here.
Display
window
Shows the current status of the
player.
6
Remote Control
POWER
DISPLAY
Switches DVD
Player
ON and
Accesses On-Screen
OFF.
?
and closes the disc tray.
?
?
Playlist
track number
or a
mark
on
the
MARKER SEARCH
?
menu.
or
a
subtitle
DVD
language.
camera
angle
or removes
?
setup
REPEAT
Repeat chapter, track,
PAUSE/STEP(X)
Pauses playback temporarily/
press repeatedly for frame-byframe playback.
?
PLAY(N)
Starts playback.
title all.
A-B
tracks in random order.
DVD disc.
TV Control Buttons
?
bBvV
Selects
?
an
item in the
Turns the TV
menu.
Confirms
on or
off.
TV PR/CH +/--:
ENTER
menu
Selects TV's channel.
selection.
Removes the
menu,
MARKER
?
point during
SEARCH
Displays
MARKER SEARCH
menu.
PROGRAM
Places
a
track
on
the program
list.
?
ZOOM
Enlarges
7
setup
the video CD with
Marks any
?
TV POWER:
(left/right/up/down)
RETURN
playback.
This button is not available.
menu on a
title menu,
if available.
Displays
?
?*
DVD MENU
TITLE
PBC.
sequence.
RANDOM
Plays
STOP(x)
Stops playback.
displays
Repeat
?
Accesses
if
menu.
forward.
source.
SKIP(./>)
Go to next chapter or track.
Returns to beginning of current
chapter or track or go to
previous chapter or track.
SETUP
Accesses
SCAN(m/M)
Search backward
language
available
the
on
audio
ANGLE
Selects
CLEAR
a
Selects the TV's
an
a
TV's volume.
AV:
SUBTITLE
Selects
a
menu.
Removes
display.
(DVD).
0-9 number buttons
Selects numbered items in
Adjusts
AUDIO
Selects
OPEN / CLOSE
Opens
TV VOL +/--:
video
image.
Introducin
up the
Setting
DVD
Player
Player Connections
?
your TV and other equipment there are various ways you
connect the player. Please refer to the manuals of your TV, stereo
Depending
can
system
or
on
other devices
as
necessary for additional connection
?
information.
Video and Audio Connections to Your TV
Make
sure
the DVD
VCR, otherwise the
player is connected directly to the TV and not
DVD image could be distorted by the copy
to
?
Video: Connect the VIDEO OUT
on
the TV
using
jack
on
the DVD
the video cable
player
to the
(V).
?
Component
Video
(Color Stream ):
Connect the COMPONENT
VIDEO OUT/PROGRESSIVE SCAN jacks
the
Set the
Progressive
to
"On"
on
the setup
menu
for
progressive signal,
page 18.
Set the progressive to "Off"
see
?
jack
(ColorStream
NOTES
a
protection system.
video in
Scan
pro):
If your television is a high-definition or "digital ready" television,
you may take advantage of the DVD Player's progressive scan
output for the highest video resolution possible.
If your TV does not accept the Progressive Scan format,
the picture will appear scrambled if you try Progressive Scan
on the DVD Player.
Progressive
corresponding
in
jacks
on
the TV
using
on
an
the DVD
Player
Y Pb Pr cable
by removeing any disc from the unit and
disc tray. see that "no disc" is displayed on the display window. Then
STOP and hold it for five seconds before releasing it.
Progressive scan does not work with the analog video connections
(yellow VIDEO OUT jack).
to
Rear of TV
(C).
AUDIO INPUT
Audio Connection to Your TV:
Pr
right AUDIO OUT jacks of the DVD Player to the
audio left and right IN jacks on the TV (A) using the audio cables. Do
not connect the DVD Player's AUDIO OUT jack to the phone in jack
(record deck) of your audio system.
Pb
VIDEO
INPUT
Y
Connect the left and
C
AV
Rear of DVD
8
player
close the
press
Setting
up the
Player (continued)
Audio Connection to
Connect the DVD
player
Rear of DVD
Amplifier equipped with 2-channel analog stereo or Dolby Pro Logic
ll / Pro Logic: Connect the left and right AUDIO OUT jacks on the DVD
player to the audio left and right IN jacks on your amplifier, receiver, or
stereo system, using the audio cables (A).
Optional Equipment
to your
optional equipment
for audio output.
Amplifier equipped with 2-channel digital stereo (PCM) or audio /
video receiver equipped with a multi-channel decoder (Dolby
DigitalTM, MPEG 2, or DTS): Connect one of the DVD Player's
DIGITAL AUDIO OUT jacks (COAXIAL X) to the corresponding in
jack on your amplifier. Use an optional digital (coaxial X) audio cable.
player
Digital Multi-channel sound
A digital multi-channel connection provides
the best sound
quality.
For this you need a multi-channel audio / video receiver that supports
one or more of the audio formats supported by your DVD player such
MPEG
logos
X
as
2, Dolby Digital and DTS. Check the receiver manual and the
on
the front of the receiver.
A
NOTES
?
If the audio format of the
receiver, the receiver
?
Six Channel
Digital
digital output does not match the capabilities
produces a strong, distorted sound or no sound at
Surround Sound via
obtained if your receiver is
?To
COAXIAL
DIGITAL INPUT
AUDIO INPUT
see
9
with
digital connection can only be
a Digital Multi-channel decoder.
the audio format of the current DVD in the
AUDIO.
Amplifier (Receiver)
equipped
a
of your
all.
on-screen
display,
press
Introducin
General Features
On-Screen
Title Menu
Display
Some items
can
be
changed using
1.
Press DISPLAY
2.
Press b /B to select
the
Checking
menu.
DVDs may offer menus that allow you to
the disc menu, press TITLE.
during playback.
an
item.
Input
The selected item is
3.
highlighted.
change the setting.
Press v /V to
can
also
02/04
:
02/04
:
the number buttons if
the title
Press DVD MENU and the disc
number).
Title(Track) Number,
Chapter
appropriate
Number
Press DVD MENU
0:08:20
(DVD
disc
:
Changing
only)
Moving
to another CHAPTER/TRACK
When
title
one
on a
track, you
disc has
more
than
chapter or
chapter/track as
to another
can move
Press SKIP .
one
language
a
disc has
more
follows:
2.
or
>
Press PAUSE/STEP
(X) during playback.
The
go into PAUSE mode.
will
now
again
menu
is
displayed.
to exit.
the Audio
or
Language
repeatedly during playback
to hear
a
different audio
audio track.
1.
Press SCAN
2.
Press SCAN
3.
To exit Search
(m
or
M) during playback.
(m or M) repeatedly
DVD; X2, X4, X16 or X32
Video CD; X2, X4 or X8
Still Picture and
to select the
required speed.
mode, press PLAY.
Frame-by-Frame Playback
Use the SCAN M to select the
T 1/16, T 1/8, T 1/4,
3.
highlight
Search
Slow Motion
player
the bBvVbuttons to
use
than
briefly during playback to select the next
chapter/track or to return to the beginning of the current chapter/track.
Press SKIP . twice briefly to step back to the previous chapter/track.
1.
or use
features. To
Time search
Press AUDIO
a
number
corresponding
special
Disc Menu
use
(e.g. inputting
the
access
your selection. Then press ENTER.
Press ENTER.
You
the contents of DVD discs: Menus
To exit slow motion
or
T
required speed:
1/2 (forward).
during playback. Advance
picture frame-by-frame by pressing PAUSE/STEP repeatedly.
Press PAUSE/STEP
mode, press PLAY.
on
the remote control
Press PLAY to exit still motion mode.
10
the
General Features (continued)
Marker Search
Repeat
To enter
Press REPEAT
Marker
a
from up to nine memorized points. To enter a
marker, press MARKER at the desired point on the disc. The Marker
icon appears on the TV screen briefly. Repeat to enter up to nine
You
can
start
playback
?
1.
Clear
During
disc
appears
on
a
Marked Scene
playback,
TV the
3.
press SEARCH. The marker search
?
menu
?
screen.
playback
a
You
can
search
play
any marker
starts from the marked
by inputting
1.
repeat
scene.
2.
its number
on
the marker
Video CD with PBC, you must set PBC to Off
the repeat function (See "PBC" on page 22).
On
?
If you press SKIP (>)
repeat playback cancels.
a
the setup
menu
during Repeat Chapter (Track) playback,
starting point.
"A
"
appears
briefly
on
the
2.
screen.
at your chosen end
Press A-B
again
appears briefly
on
the TV
point.
screen
and the repeat sequence
to
use
the
during playback.
random
and Random appears
playback
To return to normal
playback,
Normal appears
the
on
on
automatically begins
the TV
press RANDOM
screen.
repeatedly
until
menu screen.
TIPS
begins.
?
again
The unit
Press RANDOM
a
Press A-B
once
on
Random
1.
"A B"
3.
play repeatedly.
?
menu.
sequence.
Press A-B at your chosen
TV
Off: does not
NOTES
Repeat A-B
To
AdvanceOprtios
chapter.
Track: repeats the current track
All: repeats all the tracks on a disc.
marker number that you
Or, Press CLEAR and the marker number is erased from the list.
4.
desired repeat mode.
Video CDs
Within 10 seconds, press b /B to select
want to recall or clear.
Press ENTER and
a
Title: repeats the current title.
Off: does not play repeatedly.
?
2.
the current
Chapter: repeats
?
?
or
to select
DVD Video Discs
markers.
To Recall
during playback
to cancel.
?
By pressing
SKIP >
and
random
On
resumes
a
during random playback,
playback.
Video CD with PBC, You must set PBC to Off
the random function
(See "PBC"
11
the unit selects another track
on
page
22).
on
the setup
menu
to
use
General Features (continued)
Zoom
Use
Changing
zoom
to
enlarge
the video
Press AUDIO
image.
Press ZOOM
2.
Each press of the ZOOM button changes the screen in the sequence:
200% → 300% → 400% → Normal (4 steps).
3
Use the b
4.
To
resume
B v V buttons to
normal
playback,
move
through
the zoomed
picture.
Last Scene
Memory
This
memorizes last
last
press CLEAR.
player
scene
player
or
Zoom may not work
Camera
on some
DVDs.
a
scene
from the last disc that is viewed. The
scene
is
automatically
recalled.
player does not memorize the scene of a
player before commencing to play the disc.
different
recorded at different
camera
angles,
you
disc if you switch off the
can
Screen Saver
angle during playback.
Press ANGLE repeatedly during playback to select a desired angle.
Note that the number of the current angle appears on the display.
to
different
RIGHT).
This
scenes
a
NOTE
Angle
If the disc contains
or
to hear
remains in memory even if you remove the disc from the
switch off the player. If you load a disc that has the scene
memorized, the
NOTE
change
repeatedly during playback
audio channel (Stereo, LEFT
to activate the Zoom function.
1.
during playback
the Audio Channel
camera
The
appears when you leave the DVD player in Stop mode
for about five minutes. If the Screen Saver is displayed for five minutes,
screen saver
the DVD
Player automatically
turns itself off.
Subtitles
Press SUBTITLE
subtitle
repeatedly during playback
languages.
to
display
System
the different
Select
You must select the
If
appropriate system mode for your TV system.
in the display window, press and hold PAUSE/STEP
disc appears
for more than 5 seconds to be able to select
no
(PAL, NTSC,
12
or
Auto).
a
system
Playing
Audio CD
an
or
MP3/WMA Disc
MP3 / WMA disc
Audio CD
Once you insert
an
audio CD
Press v / V to select
a
a menu
on
appears
track then press PLAY
or
the TV
?
playback
starts.
within 8
Sampling frequency:
within 32 48kHz (WMA)
?
001 / 022
CD
00:00
Normal
/00:00
TRACK 01
TRACK 05
Bit rate: within 8
-
320kbps (MP3),
192kbps (WMA)
DISPLAY
Program
List
PROGRAM
CD-R
?
If you record MP3 / WMA files using software that cannot create
(eg. Direct-CD) it is impossible to playback MP3 / WMA files.
Add
MP3 / WMA
physical
Press v / V to select
a
folder, and press PLAY
or
ENTER to
see
a
track then press PLAY
or
ENTER.
Playback
Normal
names
should have
use
a
should not contain
Music 02
Music 04
Music 05
PROGRAM
maximum of 8 letters and must
?
The total number of files
player requires
on
Add
TIPS
are
in
a
file list
the v / V to
on
the MUSIC
move
Press TITLE to
to
a
move
the
to
a
ENTER.
copyright
the next page.
previous
page.
CD with MP3/WMA and JPEG you
Press v / V to select
or
can
switch MP3/WMA and JPEG.
folder, and press ENTER
to
ISO 9660 file
incorporate
an
.mp3
letters such
as
/ ?
*
"
:
< >
l etc.
the disc should be less than 648.
recordings to meet certain technical
optimal playback quality. Pre-recorded DVDs
are
see
permission
is
required
in order to download
MP3 / WMA files and music from the Internet. Our company has no right
to grant such permission. Permission should always be sought from the
and want to return to the Folder list,
and press PLAY
highlight
Press DVD MENU to
menu
an
file system
discs and
Customers should note that
If you
which creates
a
automatically set to these standards. There are many different types of recordable
disc formats (including CD-R containing MP3 or WMA files) and these require
certain pre-existing conditions (see above) to ensure compatible playback.
Music 03
List
Easy-CD Creator,
special
standards in order to achieve
Music 01
Program
file extension other than
extension.
They
This DVD
DISPLAY
a
format should be ISO 9660
?
003 / 036
/00:00
File
or .wma
starts.
00:00
MP3/WMA file that has
an
system.
the
?
Press v / V to select
On
read
We recommend that you
folder contents.
?
-
player cannot
".mp3" / ".wma".
TRACK 06
?
as
(MP3),
?
TRACK 04
use
48 kHz
The
TRACK 03
?
-
?
TRACK 02
2.
is limited
player
-
32
1.
with this
follows:
screen.
ENTER to
compatibility
the folder contents.
13
owner.
AdvanceOprtios
Playing
an
Audio CD
or
MP3/WMA Disc (continued)
Audio CD and MP3 / WMA Disc Features
Repeat
You
Pause
1.
2.
Press PAUSE/STEP
a
track/all
on a
1.
Press REPEAT when
2.
Press REPEAT to select
playback, press PLAY,
PAUSE/STEP again.
ENTER
disc.
playing
?
?
to another Track
a
disc. The repeat icon appears.
desired repeat mode.
a
or
?
Moving
play
during playback.
To return to
press
can
Track/All/Normal
Track: repeats the current track
All: repeats all the tracks on a disc.
Normal: does not
play repeatedly.
NOTE
1.
Press SKIP
track
or
(.
>) briefly during playback to go
the beginning of the current track.
or
to return to
2.
Press SKIP . twice
3.
You
can
play
any track
to go back to the
briefly
by inputting
previous
to the next
If you press SKIP
cancels.
track.
its number.
1.
Random
2.
Press RANDOM
immediately
2.
during playback.
Random
and RANDOM appears
To return to normal
playback,
Normal appears
the
on
on
the
To
3.
until
playback,
the repeat
playback
a
Press A-B
again
on
at your chosen end
the
menu
point.
screen, and the
The
Repeat icon
sequence begins
and
to
play
To exit the sequence and return to normal
play,
press A-B
again.
menu screen.
Search
TIP
SKIP >
during
random playback.
By pressing
resumes
Track
repeatedly.
menu screen.
repeatedly
during Repeat
sequence during disc playback press A-B at your chosen
point. The Repeat icon and "A" appear on the menu screen.
repeat
"A B" appear
Playback begins
press RANDOM
once
Repeat A-B
starting
1.
(>)
random
playback,
the unit selects another track and
14
1.
Press SCAN
2.
Press SCAN
3.
To exit Search
(m
or
M) during playback.
(m
2X,4Xor8X
or
M) repeatedly
mode, press PLAY.
to select the
required speed.
Viewing
Using
JPEG Disc
a
this DVD
Player
you
can
view discs with JPEG files.
disc and close the tray.
The PHOTO menu appears on the TV
1.
Insert
JPEG
Still Picture
a
1.
screen.
during
The
go into PAUSE mode.
001 / 052
00:00
player
will
now
To return to the slide
2.
Normal
/00:00
slide show.
Press PAUSE/STEP
PAUSE/STEP
show, press PLAY, ENTER
or
press
again.
File 01
Zoom
File 02
File 03
File 04
Use
File 05
DISPLAY
Press v / V to select
2.
a
Program
List
PROGRAM
Add
folder, and press ENTER
A list of files in the folder appears. If you
return to the
to
previous
Folder list,
use
and press ENTER
highlight
in
are
or
a
PLAY.
or
on
the remote
PLAY.
While
viewing a picture, you can
previous menu (PHOTO menu).
press STOP to
move
?
move
to the next page.
Press TITLE to
to the
previous
On
a
move
Press v / V to select
Moving
To
or
r otate
(. or >)
previous file.
4.
To
through
press CLEAR
to select the 100%.
playback,
in the sequence:
the zoomed
or
picture.
press ZOOM
as
follows:
upon the size and number of JPEG files, it could take a long time
for the DVD player to read the disc's contents. If you don't see an on-screen
reduce the
display after several minutes, some of the files may be too large
Depending
to
see
viewing
the folder contents.
a
picture
pixels
as
2760
x
2048
pixels
and
burn another disc.
switch MP3/WMA and JPEG.
?
The total number of files and folders
?
Ensure that all the selected files have the
the CD
during showing
normal
move
resolution of the JPEG files to less than 2M
can
while
B v V buttons to
screen
JPEG disc compatibility with this player is limited
to the
to advance to
?
on
the disc should be less than 648.
".jpg"
extensions when
copying
into
layout.
If the files have
".jpe"
or
".jpeg" extensions, please
rename
them
as
".jpg"
file.
picture
Press b / B
resume
repeatedly
JPEG
once
to activate the Zoom function.
Use the b
during playback
---
folder, and press ENTER
to another File
Press SKIP
the next
a
image.
3
page.
CD with MP3/WMA and JPEG you
the video
Each press of the ZOOM button changes the
100% → 150% → 200% → 100%
?
Press DVD MENU to
enlarge
2.
TIPS
?
to
Press ZOOM
If you want to view a particular file, press v / V to highlight a file
and press ENTER or PLAY. Viewing the file proceeding starts.
3.
zoom
1.
file list and want to
the v / V buttons
JPEG
?
a
picture
to rotate the
picture
clockwise
File
names
without
player. Even
Explorer.
or
counter clockwise.
15
".jpg" extension will not be able to be read by this DVD
though the files are shown as JPEG image files in Windows
AdvanceOprtios
Programmed Playback
CD
MP3
WMA
The program function enables you to store your favorite tracks from any
disc in the player memory.
A program
can
contain 30 tracks
disc.
Insert
2.
Press v / V to select the desired file.
3.
Press PROGRAM
4.
Press DISPLAY.
(Audio CD, MP3
or
WMA.)
List
Program
menu
in the
appear.
Press v / V to select the track you want to start
Press DVD MENU to
move
Press TITLE to
to
move
the
to
001 / 022
CD
00:00
Normal
/00:00
Program
playing.
the next page.
previous
page.
003 / 036
List
00:00
/00:00
Program
List
Normal
Music 01
TRACK 01
Music 02
TRACK 02
Music 03
TRACK 03
Music 04
TRACK 04
Music 05
TRACK 05
Music 06
TRACK 06
DISPLAY
Return
CLEAR
DISPLAY
Delete
Audio CD Menu
5.
Press PLAY
6.
To
resume
or
Return
CLEAR
Delete
MP3/WMA Menu
ENTER to start.
normal
playback
Press DISPLAY then select
from
a
Track from program list
Use v / V to select the track that you wish to
the program list.
2.
Press CLEAR.
For details
during playback
stop mode.
Repeat press PROGRAM to place additional tracks on
the program list.
or
a
1.
(Audio CD, MP3/WMA).
1.
a
Erasing
programmed playback.
track of list and then press PLAY
or
ENTER.
16
on
Repeat
each
to
erase
erase
additional tracks
operation item,
on
from
the list.
refer to relevant page.
Initial
Settings
By using the Setup menu, you can make various adjustments to items
such as picture and sound. You can also set a language for the subtitles
and the Setup menu, among other things. For details on each Setup menu
item,
To
see
LANGUAGE
pages 17 to 22.
display
Menu
and exit the Menu:
Press SETUP to
display
you back to initial
the
InitalSengs
LANGUAGE
Language
English
Disc Audio
Original
Disc Subtitle
Off
Disc Menu
Original
A second press of SETUP will take
menu.
screen.
Move
Select
Exit
To go to the next level:
Press B
on
the remote control.
To go back to the
Press b
on
previous
level:
the remote control.
Menu
Language
Select
a
language
for the
Setup
Disc Audio / Subtitle / Menu
General
Operation
Select the
1.
Press SETUP. The
2.
Use b / B to select the desired
move
menu
to the second level. The
selected item,
3.
Setup
as
well
as
and the disc
appears.
then press V or ENTER to
shows the current setting for the
option
screen
alternate
option
code list in
move
to the third level.
4.
your selection. Some items
setting then press ENTER
require additional steps.
5.
Press
SETUP, RETURN
or
PLAY to exit the
Setup
to confirm
menu.
17
on-screen
display.
audio track
(disc audio), subtitles,
menu.
original language
in which the disc
was
recorded.
language, press number buttons then Press
enter the corresponding 4-digit number according to the language
the reference chapter. If you enter the wrong language code,
press CLEAR.
Use v / V to select the desired
and
DVD
prefer for the
Other: To select another
ENTER to
then press B to
you
Refers to the
Original:
setting(s).
Use v / V to select the second desired
language
menu
Initial
Settings (continued)
DISPLAY
Progressive
Progressive Scan
flickering. If you
DISPLAY
TV
4:3
Aspect
Display
Mode
Progressive
Letterbox
Scan
Scan
a
TV
Video
are
monitor that
or
Off
provides the highest quality pictures with less
using the Component Video jacks for connection
is compatible with a progressive scan signal, set
to
Scan to On. Press ENTER to confirm your selection.
The confirm menu will appear.
Progressive
Caution
Move
TV
Aspect
Select
If your TV does not accept the Progressive Scan format, the picture will
appear scrambled if you try Progressive Scan on the DVD Player.
If you set Progressive Scan to On in error, you must reset the unit.
Exit
DVD
4:3: Select when
a
16:9: Select when
standard 4:3 TV is connected.
a
1)
The
16:9 wide TV is connected.
2)
Display
Mode
Display
Mode
DVD
works
setting
only
when the TV
Aspect
mode is set to
"4:3".
LetterBox:
portions
of the
a
wide
picture
with bands
on
the upper and lower
screen.
Automatically displays the
off the portions that do not fit.
Panscan:
cuts
Displays
wide
Press B. Select "Off"
picture
on
the entire
screen
and
18
Setup
menu
using
the v / V buttons.
appears.
Press STOP and hold it for five seconds before
releasing it. The video
output will be restored to the standard setting and a picture will once
again be visible on a conventional analog TV or monitor.
Settings (continued)
Initial
AUDIO
Sample Freq. (Frequency)
Each DVD disc has
AUDIO
DVD
variety
options according to
a
of audio output options. Set the player's
the type of audio system you use.
If your receiver or amplifier is NOT capable of handling 96 KHz
select 48 KHz. When this choice is made, this unit automatically
converts any
96 KHz
signals
to 48 KHz
so
your
system
can
signals,
decode them.
AUDIO
Dolby Digital
Bitstream
DTS
Bitstream
MPEG
PCM
Sample Freq.
48KHz
DRC
Off
If your receiver or amplifier is capable of handling 96 KHz signals, select
96 KHz. When this choice is made, this unit passes each type of signal
through
without any further
processing.
Check the documentation for your
Move
Dolby Digital
/ DTS / MPEG
Select
Exit
DRC
PCM
DTS
or
DVD
to
a
digital stereo amplifier. DVDs encoded in Dolby Digital
will be automatically downmixed to two-channel PCM
(for DTS): If
through
you select "Off", the DTS
the DIGITAL OUT jack.
capabilities.
DVD
the audio output (the
quietest ones). This allows you to listen to a movie at a lower volume
without losing clarity of sound. Set DRC to On for this effect.
audio.
Off
its
you may wish to compress the dynamic range of
difference between the loudest sounds and the
MPEG decoder.
(for Dolby Digital / MPEG): Select when connected
MPEG
verify
technology. However,
two-channel
or
to
With the DVD format, you can hear a program's soundtrack in the most
accurate and realistic presentation possible, thanks to digital audio
Bitstream: Select "Bitstream" if you connect the DVD Player's
DIGITAL OUT jack to an amplifier or other equipment with a Dolby
Digital,
(Dynamic Range Control)
amplifier
signal
is not
output
19
InitalSengs
Initial
Settings (continued)
LOCK (Parental
Control)
1. Select
The
Rating
Unlock
Password
NEW
Area code
DE
Move
view.
scenes are
disc
rated from 1 to 8,
suitable
more
Select
Exit
scenes
Many
applies to the complete
scenes as an
or
to certain
depending
scenes on
on
the disc. Movies and
the country. Some discs offer
alternative.
?
one
(1) has the
rating eight (8)
is the least restrictive.
Unlock: If you select unlock,
plays in full.
parental
control is not active and the disc
NOTE
If you set
lower are
scene
or a
rating for the player, all disc scenes with
played. Higher rated scenes are not played
a
is available
lower
one.
If
same
unless
on
the disc. The alternative must have the
no
suitable alternative is found,
You must enter the
play
the
4-digit password
or
an
rating
or
alternate
same
a
4-digit
rating
playback stops.
change the rating level in order
rating selection,
then press SETUP to
again
a
or
mistake before
b
pressing ENTER
repeatedly to delete password
in each section, press CLEAR to
numbers one by one then
correct it.
?
most restrictions and
If you make
enter
view material you believe is unsuitable.
Rating
v / V buttons and press ENTER.
TIPS
parental control feature allows you to block access to scenes below
the rating you input, thereby preventing your children from being able to
1-8:
then press B.
a
4. Press ENTER to confirm your
exit the menu.
The
Rating
menu
password using the numbered buttons then press ENTER. Enter the
4-digit security password again to verify when the "Confirm
Password" section is highlighted. The "OK" will be highlighted.
If you have entered password already:
Enter a 4-digit password you have entered using the numbered
buttons. The "OK" will be highlighted.
that may not be suitable for children to
of these discs contain parental control information that
Some movies contain
the LOCK
3. If you have not entered password yet:
When the "New Password" section is highlighted, enter
DVD
Rating
on
rating from 1 to 8 using the
password widow will appear.
2. Select
LOCK
Rating
to
the disc.
20
If you enter the wrong
password,
you
can
not
proceed
to
the next step.
Initial
Password
You
can
Settings (continued)
(Security Code)
create
or
Area Code
change password.
1. Select Password
on
the LOCK
menu
then press B. The
"Change"
Enter the code of the
is
video disc, based
highlighted
2. Press ENTER then the
3. To make
a new
password
window will appear.
password:
When the "New Password" section is
highlighted,
enter
a
4-digit
password using the numbered buttons then press ENTER. Enter the
4-digit password again to verify when the "Confirm Password"
section is highlighted, then. The "OK" will be highlighted.
To change the password:
When the "Old Password" section is highlighted, enter the 4-digit
password you have created then press ENTER. The"New Password"
section will be highlighted. Enter a new 4-digit password using the
numbered buttons then press ENTER. Enter the new 4-digit security
password again to verify when the "Confirm Password" section is
highlighted. The "OK" will be highlighted.
4. Press SETUP to exit the
If you
forget
If you
forget
your
your
security
can
clear it
using
the
steps:
Remove any disc from the unit and close the disc tray.
See that "nodISC" is displayed on the display window.
2.
Press SETUP and
apears on the TV screen.
Use the numbered buttons to enter the 6-digit number "210499".
setup
See that "P-CLr" is
3.
Enter
a new
menu
displayed
password
as
on
the
display
Select "Area Code"
2.
Select the first character
3.
Shift the
on
the LOCK
using B
using
menu
used to rate the DVD
chapter.
then press B.
v / V buttons.
button and select the second character
using
ENTER, the password window will appear
ENTER, the password window will appear.
4.
Press
5.
If you have not entered password yet:
When the "New Password" section is highlighted, enter
a
4-digit
6. Press ENTER to confirm your Area Code selection, then press SETUP
to exit the menu.
following
1.
the list in the reference
1.
cursor
were
password using the numbered buttons then press ENTER. Enter the
4-digit security password again to verify when the "Confirm
Password" section is highlighted. The "OK" will be highlighted.
If you have entered password already:
Enter a 4-digit password you have entered using the numbered
buttons. The "OK" will be highlighted.
Code
code you
whose standards
v / V buttons then press
menu.
Security
on
area
window.
described above.
21
InitalSengs
Settings (continued)
Initial
OTHERS
Auto
The PBC, Auto
and B.L.E.
Play
settings
can
be
changed.
You
OTHERS
PBC
Auto
On
On
Play
B.L.E.
can
Select
set up the DVD
Player
so a
DVD disc
automatically
playing
whenever the DVD is inserted.
If Auto
Play mode is set to On, this DVD player will
longest playback time and then play back the
has the
Off
Move
Play
DVD
On: Auto
Play
function is activated.
Off: Auto
Play
function is not activated.
starts
search for title that
title
automatically.
Exit
NOTE
PBC
Set
The Auto
VCD
Playback
Control
(PBC)
On: Video CDs with PBC
Off: Video CDs with PBC
to On
are
are
or
Off.
B.L.E.
played according
played
the
same
monitor 's
as
Audio CDs.
On:
NOTES
?
PBC:
Playback
Playback control
Control
(Video
CD
(VCD)
version 2.0 disc formats.
resolution
equipped
?
can
be
with PBC
if
Use the number buttons to select the track you want to view and press
RETURN to return to the menu screen. Menu settings and operating procedures
may differ. Follow the instructions
PBC to Off.
on
ability.
Expanded
grey scale.
the each
menu screen.
(0 IRE
(7.5
cut
off)
IRE cut
The B.L.E. function works NTSC system
they are included in the disc. Video CDs not
(Version 1.1) operate in the same way as audio CDs.
played
Expansion)
level of playback pictures.
off)
NOTE
PBC allows you to interact with the system via menus, search functions,
or other typical computer-like operations. Moreover, still pictures of high
You also may set
22
some
DVDs.
Level
Off: Standard grey scale.
only)
is available for Video CD
(Black
function may not work for
To select the black
to the PBC.
way
Play
only.
Set your
preference
and
Additional Information
COPYRIGHTS:
It is forbidden
or
rent
by law to copy, broadcast, show, broadcast
copyrighted material without permission.
Controlling
via cable,
play
in
public,
You
can
other TVs with the remote control
control the sound level,
LG TV with the
This
product features the copy protection function developed by Macrovision.
Copy protection signals are recorded on some discs. When recording and playing the
pictures of these discs on a VCR, picture noise will appear.
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is intended for
home and other limited viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disassembly is prohibited.
You
can
supplied
input
Refrnce
remote control.
control the sound level,
input
source, and power switch of
well. If your TV is listed in the table below, set the
manufacturer code.
non-LG TVs
appropriate
source, and power switch of your
as
1.
While
down TV POWER button, press the number buttons to
select the manufacturer code for your TV (see the table below).
2.
Release TV POWER button.
holding
Code numbers of controllable TVs
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION
If
code number is listed, try entering them
until you find the one that works with your TV.
TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND
MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE
OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS
more
than
one
Manufacturer
Code Number
LG / GoldStar
1
Zenith
1,3,4
Samsung
6,7
Sony
8,9
Hitachi
4
one
at
a
time
RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE
'STANDARD DEFINITION' OUTPUT. IF THERE ARE
QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL
625p
525p
AND
DVD PLAYER,PLEASE CONTACT OUR CUSTOMER SERVICE
CENTER.
(Default),
2
NOTES
23
?
Depending on your TV, some or all buttons may
after entering the correct manufacturer code.
?
If you enter
erased.
?
When you replace the batteries of the remote, the code number you have set
may be reset to the default setting. Set the appropriate code number again.
a new
not
code number, the code number
function
previously
on
the TV,
even
entered will be
Troubleshooting
Possible Cause
Symptom
No power.
?
The power is on, but the
DVD player does not
?
Correction
The power cord is disconnected.
?
No disc is inserted.
?
picture.
Insert
a
disc.
cord into the wall outlet
(Check that the
audio CD indicator in the
work.
No
Plug the power
securely.
?
The TV is not set to receive DVD
signal
?
output.
?
The video cable is not connected
window is
lit.)
Select the
the TV.
appropriate
Connect the video cable
?
Select the correct
or
display
video
?
DVD
input
mode
on
securely.
securely.
No sound.
?
The
equipment
connected with the audio
cable is not set to receive DVD
?
The power of the equipment connected with
the audio cable is turned off.
The AUDIO
options
are
set to the wrong
?Turn
The DVD
start
player
playback.
does not
An
?
?
The
unplayable
rating
disc is inserted.
level is set.
on
The remote control does
not work
The remote control is not
remote
properly.
?
sensor on
the
pointed at
DVD player.
the
DVD
?
Cancel the
?
24
connected with the
(Check the disc
type, color system, and regional code.)
Insert
a
playable
rating
disc.
function
or
change
the
level.
Point the remote control at the remote
sensor
player.
equipment
Digital Audio Output to the
correct position, then turn on the DVD
player again by pressing POWER.
?
?
The remote control is too far from the
the
Set the
rating
?
so
audio cable.
position.
?
mode of the audio
you can listen to the sound
from the DVD player.
receiver
signal
output.
?
input
of the DVD
Operate the remote
DVD player.
player.
control closer to the
Language
Use this list to
Disc
Audio,
Codes
your desired language for the
Disc Subtitle, Disc Menu.
input
Language
Code
Abkhazian
following
Code
6566
Language
Fiji
Afar
6565
Afrikaans
initial
settings:
Code
7074
Language
Lingala
Code
7678
Language
Singhalese
Finnish
7073
Lithuanian
7684
Slovak
8375
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
Ameharic
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
8084
Twi
8487
Catalan
6765
Japanese
7465
Portuguese
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
25
8373
8471
8479
Refrnce
Area Codes
Choose
an area
Area
code from this list.
Code
Area
Code
Area
Code
Area
Code
ET
Malaysia
MY
Saudi Arabia
SA
AR
Ethiopia
Fiji
FJ
Maldives
MV
SN
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Heard and McDonald Islands HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
Chile
CL
Hong Kong
Hungary
HU
NG
Switzerland
CH
China
CN
India
IN
Nigeria
Norway
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
UG
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
Czech
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
KW
Portugal
PT
Uzbekistan
UZ
LY
Romania
RO
Vietnam
VN
LU
Russian Federation
RU
Zimbabwe
ZW
Afghanistan
Argentina
Republic
AF
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
Egypt
EG
El Salvador
SV
Libya
Luxembourg
26
SG
SK
Specifications
General
Power
Power
System
requirements:
AC 110-240 V
consumption:
8W
Dimensions
(Approx.):
430
Weight (Approx.):
1.9
,
50/60 Hz
Laser:
Semiconductor laser,
x
35
x
242
(W
mm
x
H
x
D)
Signal system:
without foot
650
Refrnce
nm
PAL/NTSC
Frequency response:
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
kg
Operating temperature:
5°Cto35°C(41°Fto95°F)
Operating humidity:
wavelength
CD:8Hzto20kHz
5 % to 90 %
Signal-to-noise
ratio:
More than 100 dB
Outputs
(ANALOG
OUT connectors
only)
Harmonic distortion: Less than 0.02%
VIDEO OUT:
1.0 V
(p-p),
75 Ω, sync
negative,
RCA jack
x
Dynamic
range:
More than 95 dB
1
(DVD/CD)
COMPONENT VIDEO OUT:
1.0 V
(Y)
(Pb)/(Pr)
75
(p-p),
Ω,negative sync, RCA jack
0.7 V (p-p), 75 Ω, RCA jack x 2
x
Accessories:
1
Video cable
AUDIO OUT:
2.0Vrms(1KHz,0dB),600Ω,RCAjack(L,R)x1
DIGITAL OUT
(COAXIAL):
0.5V(p-p),75Ω,RCAjackx1
27
(1),
Audio cable
(1),
Remote control
(1),
Batteries
(2)
12
MONTH
GUARANTEE
The
This
Express
and repair of any defective
componentry or faults in manufacture for the period specified in
the
Guarantee Decal above.
However,
accepts no liability where any goods fail to comply with this express guarantee because of any reasons beyond
control.
specifically
covers
replacement
at no cost to the
Faulty components will be replaced by
owner. Similarly all workshop labour costs needed to restore the
goods to their original working condition will be met by
Express
Guarantee
during the guarantee period.
This applies to work done in any approved
and specifically excludes travel time, freight
charges.
The conditions of this Express
carried out by an approved
Express
guarantee only apply if repairs
are
Service Centre in New Zealand.
This guarantee is not transferrable
Consumer Guarantee Act 1993.
except
as
provided by
the
Guarantee Service
guarantees the continued supply of spare parts for a period after the date of manufacture of
components and 3 years for cabinet and other cosmetic components.
If there is any conflict between this
of the Act shall apply.
or
Service Centre
any other related
Guarantee and the
provisions
not less than 5 years for electrical
of the Consumer Guarantee Act 1993, the
Model No:
Date Purchased:
Serial No:
Purchased from:
provisions
Download PDF

advertising