LG | HR598D | LG HR598D Owner’s Manual

OWNER’S MANUAL
Twin HD Recorder/
Blu-ray Combo
Please read this manual carefully before operating
your set and retain it for future reference.
MODELS
HR599D/HR598D
P/NO : MFL62320946
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK) NO USERSERVICEABLE PARTS INSIDE REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing) instructions
in the literature accompanying the product.
Cautions and Warnings
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service centre.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try
to open the enclosure. Visible laser radiation when
open. DO NOT STARE INTO BEAM.
1
Safety Information
1
Safety Information
I
Safety Information
Safety Information
CAUTION concerning the Power Cord
Notes on Copyrights
Most appliances recommend they be placed upon a
dedicated circuit;
• Recording equipment should be used only for
lawful copying and you are advised to check
carefully what is lawful copying in the area
in which you are making a copy. Copying of
copyright material such as films or music is
unlawful unless permitted by a legal exception or
consented to by the rights owner.
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact
replacement part by an authorized service centre.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention
to plugs, wall outlets, and the point where the cord
exits the appliance. To disconnect power from the
mains, pull out the mains cord plug. When installing
the product, ensure that the plug is easily accessible.
This device is equipped with a portable battery or
accumulator.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
• This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation
and other rights owners. Use of this copyright
protection technology must be authorized by
Macrovision Corporation, and is intended for
home and other limited viewing uses only, unless
otherwise authorized by Macrovision corporation.
Reverse engineering or disassembly is prohibited.
• CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 625 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION
TO THE ‘STANDARD DEFINITION’ OUTPUT. IF
THERE ARE QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS MODEL 625p UNIT
PLEASE CONTACT OUR CUSTOMER SERVICE
CENTRE.
• Because AACS (Advanced Access Content System)
is approved as content protection system for BD
format, similar to use of CSS (Content Scramble
System) for DVD format, certain restrictions are
imposed on playback, analogue signal output,
etc., of AACS protected contents. The operation of
this product and restrictions on this product may
vary depending on your time of purchase as those
restrictions may be adopted and/or changed by
AACS after the production of this product.
• Furthermore, BD-ROM Mark and BD+ are
additionally used as content protection systems
for BD format, which imposes certain restrictions
including playback restrictions for BD-ROM
Mark and/or BD+ protected contents. To obtain
additional information on AACS, BD-ROM Mark,
BD+, or this product, please contact an authorized
Customer Service Centre.
•
Safety Information
• Many BD-ROM/DVD discs are encoded with
copy protection. Because of this, you should only
connect your player directly to your TV, not to a
VCR. Connecting to a VCR results in a distorted
picture from copy-protected discs.
• Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs
and other materials may subject you to civil and/
or criminal liability.
1
Safety Information
• This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Macrovision, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
Contents
Contents
1
Safety Information
3
3
4
5
6
Cautions and Warnings
2
Connections to Your TV
14
Antenna connection to your
TV and this unit
15
HDMI Connection
16
Component Video
Connection
16
Composite connection
17
Resolution Setting
18
Connecting to an Amplifier
Preparation
18
Connecting to an Amplifier
via HDMI Output
8
19
Connecting to an Amplifier
via Digital Audio Output
(Coaxial)
Connecting to an Amplifier
via 2 Channel Audio Output
Introduction
8
About the “ ” Symbol
Display
8
Symbols Used in this
Manual
19
8
Supplied Accesorries
20
9
Playable Discs
20
Wired network connection
Wired Network Setup
Wireless Network
Connection
10
File compatibility
21
11
Regional Code
22
11
AVCHD (Advanced Video
Codec High Definition)
11
Certain System
Requirements
11
7
Installation
14
1
2
3
Compatibility Notes
12
Remote control
13
Main Unit
22
Connecting to your Home Network
Wireless Network Setup
26
USB device connection
27
Home Menu Overview
28
Settings
28
Adjust the Setup Settings
29
Settings for Digital TV
29
Selecting a Region
29
Scanning programmes
automatically
30
Scanning programmes
manually
31
Setting the DTV Lock
System
31
Adjusting DTV Rating level
Contents
32
Setting the antenna power
32
Setting the permanent
Timeshift
32
Setting a recording storage
location
33
[DISPLAY] Menu
34
[LANGUAGE] Menu
35
[AUDIO] Menu
36
[LOCK] Menu
37
[NETWORK] Menu
38
[DTV] Menu
39
[OTHERS] Menu
6
Troubleshooting
74
General
75
Picture
75
Sound
76
Network
77
Recording
Appendix
3
78
42
Using the Digital TV functions
79
46
Recording TV programmes
80
Language code List
50
General Playback
81
Trademarks and Licenses
54
Advanced Playback
82
Network Software Update
56
On-Screen display
82
58
Enjoying BD-LIVE
82
59
Playing movie files and VR disc
84
Audio Output Specifications
60
Viewing a photo
86
Video Output Resolution
62
Listening to music
87
Specifications
63
Playing content via your home
network
87
87
TV Recording
68
Using [Copy] features
87
Connectors
69
Playing YouTube™ videos
87
Maintenance
72
Notes on Discs
72
Handling the Unit
73
About the hard disk drive
HDD
2
Controlling a TV with the Supplied
Remote Control
Operation
5
1
7
78
4
Setting up the remote to
control your TV
Area Code List
Network update notification
4
5
Software Update
6
General
System
88
Important Information Relating to
Network Services
89
Open source software notice
7
1
2
3
4
Contents
2
Preparation
Introduction
About the “ ” Symbol Display
“ ” may appear on your TV display during
operation and indicates that the function
explained in this owner’s manual is not
available on that specific media.
Symbols Used in this Manual
MUSIC
Music files contained on a Disc
MUSIC-N
Music files on a DLNA server or
PC
PHOTO
Photo files contained on a
DLNA server, PC or Disc
MOVIE-M
Movie files contained on a
HDD/USB
MUSIC-M
Music files contained on a
HDD/USB
PHOTO-M
Photo files contained on a
HDD/USB
REC
Titles recorded via this unit
NOTE
5
Indicates special notes and operating features.
6
Indicates caution for preventing possible
damages from abuse.
Supplied Accesorries
CAUTION
A section whose title has one of the following
symbols are applicable only to the disc
represented by the symbol.
7
BD
Video cable (1)
Audio cables (1)
Remote control (1)
Batteries (2)
Nero MediaHome4
Essentials software
CD-ROM (1)
RF cable (1)
BD-ROM disc
DVD
DVD-Video, DVD±R/RW in
Video mode or VR mode and
finalized
AVCHD
DVD±R/RW in AVCHD format
ACD
Audio CDs
MOVIE
Movie files contained on a Disc
MOVIE-N
Movie files on a DLNA server or
PC
Preparation
Playable Discs
Blu-ray Disc
- Discs such as movies that can
be purchased or rented.
- BD-R/RE discs that contain
Movie, Music or Photo files.
DVD±R (8 cm / 12 cm disc)
- Video mode and finalized only
- Supports the dual layer disc
also
- Finalized AVCHD format
- DVD±R discs that contain
Movie, Music or Photo files.
DVD-RW (8 cm / 12 cm disc)
- VR mode, Video mode and
finalized only
- Finalized AVCHD format
- DVD-RW discs that contain
Movie, Music or Photo files.
DVD+RW (8 cm / 12 cm disc)
- Video mode and finalized only
- Finalized AVCHD format
- DVD+RW discs that contain
Movie, Music or Photo files.
Audio CD (8 cm / 12 cm disc)
CD-R/RW (8 cm / 12 cm disc)
- CD-R/RW discs that contain
audio titles, Movie, Music or
Photo files.
NOTE
• Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD-R/RW)
disc itself, some CD-R/RW (or DVD±R/RW) discs
cannot be played on the unit.
• Depending on the recording software & the
finalization, some recorded discs (CD-R/RW or
DVD±R/RW) may not be playable.
2
• BD-R/RE, DVD±R/RW and CD-R/RW discs
recorded using a personal computer or a DVD or
CD Recorder may not play if the disc is damaged
or dirty, or if there is dirt or condensation on the
player’s lens.
Preparation
DVD-VIDEO (8 cm / 12 cm disc)
Discs such as movies that can be
purchased or rented.
• If you record a disc using a personal computer,
even if it is recorded in a compatible format,
there are cases in which it may not play because
of the settings of the application software used
to create the disc. (Check with the software
publisher for more detailed information.)
• This unit requires discs and recordings to meet
certain technical standards in order to achieve
optimal playback quality.
• Pre-recorded DVDs are automatically set to
these standards. There are many different
types of recordable disc formats (including
CD-R containing MP3 or WMA files) and these
require certain pre-existing conditions to ensure
compatible playback.
• Hybrid disc have both BD-ROM and DVD (or CD)
layers on one side. On such discs, BD-ROM layer
will be only played back in this player.
• Customers should note that permission is
required in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
should always be sought from the copyright
owner.
• You have to set the disc format option to
[Mastered] in order to make the discs compatible
with the LG players when formatting rewritable
discs. When setting the option to Live System,
you cannot use it on LG player. (Mastered/Live
File System : Disc format system for windows
Vista)Vista)
10
Preparation
File compatibility
NOTE
Overall
• HD movie files contained on the CD or USB
1.0/1.1 may not played properly. BD, DVD or USB
2.0 are recommended to play back HD movie
files.
Available Files extensions: “.jpg”, “.jpeg”, “.png”,
“.avi”, “.divx”, “.mpg”, “.mpeg”, “.mkv”, “.mp4”, “.mp3”,
“.wma”
2
•
Available file extensions differ depending
on the DLNA servers.
•
The file name is limited to 180 characters.
• This player supports H.264/MPEG-4 AVC profile
Main, High at Level 4.1. For a file with higher
level, the warning message will appear on the
screen.
Preparation
• This player does not support the file that are
recorded with GMC*1 or Qpel*2. Those are video
encoding techniques in MPEG4 standard, like
DivX or XVID have.
•
Depending on the size and number of the
files, it may take several minutes to read the
contents on the media.
Maximum Files/Folder: Less than 2000 (total
number of files and folders)
CD-R/RW, DVD±R/RW, BD-R/RE Format:
ISO 9660+JOLIET, UDF and UDF Bridge format
MOVIE
Available resolution size: 1920 x 1080 (W x H)
pixels
Playable subtitle: SubRip (.srt / .txt), SAMI
(.smi), SubStation Alpha (.ssa/.txt), MicroDVD
(.sub/.txt), VobSub (.sub), SubViewer 1.0 (.sub),
SubViewer 2.0 (.sub/.txt), DVD Subtitle System
(.txt)
Playable Codec format: “DIVX3.xx”, “DIVX4.
xx”, “DIVX5.xx”, “XVID”, “DIVX6.xx” (Standard
playback only), H.264/MPEG-4 AVC, DIVX-HD,
MPEG1 SS, MPEG2 PS, MPEG2 TS
Playable Audio format: “Dolby Digital”, “DTS”,
“MP3”, “WMA”, “AAC”, “AC3”
•
Not all the WMA and AAC Audio formats are
compatible with this unit.
Sampling frequency: within 32-48KHz (WMA),
within 16-48KHz (MP3)
Bit rate: within 20-320Kbps (WMA), within
32-320Kbps (MP3)
*1GMC – Global Motion Compensation
*2Qpel ­– Quarter pixel
MUSIC
Sampling frequency: between 8 - 48KHz
(WMA), within 11 - 48KHz (MP3), 44.1 and
48KHz (LPCM)
Bit rate: between 8 - 320 kbps (WMA, MP3),
768Kbps and 1.536Mbps (LPCM)
NOTE
• This unit cannot support the ID3 Tag embedded
MP3 file.
• The total playback time indicated on the screen
may not be correct for VBR files.
PHOTO
Recommended size:
Less than 4,000 x 3,000 x 24 bit/pixel
Less than 3,000 x 3,000 x 32 bit/pixel
•
Progressive and lossless compression photo
image files are not supported.
•
Depending on the size and number of the
photo files, it may take several minutes to
read the contents of the media.
Preparation
Regional Code
This unit has a regional code printed on the
rear of the unit. This unit can play only BD-ROM
or DVD discs labelled same as the rear of the
unit or “ALL”.
AVCHD (Advanced Video Codec
High Definition)
This player can playback AVCHD format
discs. These discs are normally recorded and
used in camcorders.
•
The AVCHD format is a high definition
digital video camera format.
•
The MPEG-4 AVC/H.264 format is capable
of compressing images at higher efficiency
than that of the conventional image
compressing format.
•
Some AVCHD discs use the “x.v.Color”
format.
•
This player can playback AVCHD discs using
“x.v.Color” format.
•
Some AVCHD format discs may not play,
depending on the recording condition.
•
AVCHD format discs need to be finalized.
•
“x.v.Color” offers a wider colour range than
normal DVD camcorder discs.
Certain System Requirements
For high definition video playback:
•
High definition display that has
COMPONENT or HDMI input jacks.
•
BD-ROM disc with high definition content.
•
HDMI or HDCP capable DVI input on your
display device is required for some content
(as specified by disc authors).
•
For up-conversion of standard definition
DVD, a HDMI or HDCP capable DVI input
on your display device is required for copy
protected content.
For Dolby® Digital Plus, Dolby TrueHD and DTSHD multi-channel audio playback:
•
An amplifier/receiver with a built-in (Dolby
Digital, Dolby Digital Plus, Dolby TrueHD,
DTS or DTS-HD) decoder.
•
Main, centre, surround speakers and
subwoofer as necessary for chosen format.
Compatibility Notes
•
Because BD-ROM is a new format,
certain disc, digital connection and other
compatibility issues are possible. If you
experience compatibility problems, please
contact an authorized Customer Service
Centre.
•
Viewing high-definition content and upconverting standard DVD content may
require a HDMI-capable input or HDCPcapable DVI input on your display device.
•
Some BD-ROM and DVD discs may restrict
the use of some operation commands or
features.
•
Dolby TrueHD, Dolby Digital Plus and DTSHD are supported with maximum 7.1
channels if you use HDMI connection for
the audio output of the unit.
•
You can use a USB device that is used
to store some disc related information,
including downloaded on-line content. The
disc you are using will control how long this
information is retained.
2
Preparation
•
11
12
Preparation
Remote control
OPEN/
CLOSE
2
Preparation
CLEAR
GUIDE
REC.
TIMER
REC.
• • • • • • a• • • • • • 1 (Power): Switches the unit ON
or OFF.
TIME SHIFT: Activates pause live
TV/playback (timeshift) for a live TV
programme (only working in HDD
mode).
OPEN/CLOSE (Z): Opens and
closes the disc tray.
0-9 numerical buttons: Select
numbered options in a menu.
CLEAR: Removes a mark on the
search menu or a number when
setting the password.
REPEAT: Repeats a desired section
or sequence.
• • • • • • b• • • • • • DISC MENU
REC.LIST
FAV
EDIT
PAGE
MARKER
SEARCH
ZOOM
TEXT
AUDIO
SUBTITLE
AV/INPUT
VOL
PR
VOL
PR
Battery Installation
Remove the battery cover
on the rear of the Remote
Control, and insert two R03
(size AAA) batteries with
and matched correctly.
./>: Go to next or previous
chapter/track/file.
m/M: Searches backward or
forward.
x : Stops playback.
B : Starts playback.
X : Pauses playback or recording.
• • • • • • c• • • • • • GUIDE: Displays the EPG menu.
PR (U/u): Scans up or down
through memorized programmes.
REC. (z): Starts recording and
copying.
PR LIST: Displays the programme
list.
TIMER REC.: Display [Timer
Recording] menu.
HOME ( ): Accesses or removes
the HOME menu.
INFO/DISPLAY ( ): Displays or
exits On-Screen Display.
U/u/I/i (left/right/up/down):
Navigates on-screen displays.
ENTER ( ): Acknowledges
menu selection or displays the
programme list.
RETURN (O): Exits the menu or
back to previous step.
TITLE/POPUP: Displays the DVD
title menu or BD-ROM’s popup
menu, if available.
DISC MENU/REC.LIST: Accesses
menu on a disc or switches
between Title List-Playlist menu.
• • • • • • d• • • • • • FAV.: Displays the favourite
programme list.
PAGE (-/+): Moves to next or
previous page of contents/TV list.
EDIT: Displays an editing menu
A/B/C/D: Used for [MOVIE],
[PHOTO] and [MUSIC] menu. The
function of each button will be
described on-screen, and changes
depending on the screen being
displayed.
MARKER: Marks any point during
playback.
SEARCH: Displays or exits the
search menu.
ZOOM: Displays or exits the
[Zoom] menu.
TEXT: Switches between teletext
mode and normal TV viewing.
AUDIO: Selects an audio language
or audio channel.
SUBTITLE: Selects a subtitle
language.
TV Control Buttons: See page 78.
Preparation
13
Main Unit
2
a 1 (Power)
g z (Recording)
b Disc Tray
h lII/iil (Skip)
c Remote Sensor
i Z (Open/Close)
d Display window
j RESET
Press this button to reboot.
e ill (Play/Pause)
f s (Stop)
a ANTENNA IN
b HDMI OUT (1080p)
c LAN port
d DIGITAL AUDIO OUT (COAXIAL)
e 2CH AUDIO OUT (Left/Right)
f VIDEO OUT
k
k USB Port
g AC IN connector
Connect the supplied power cord.
h ANTENNA OUT (TO TV)
i COMPONENT VIDEO OUT (Y PB PR)
Preparation
j
14
Installation
3
Installation
Connections to Your
TV
3
Installation
Make one of the following connections,
depending on the capabilities of your existing
equipment.
•
Antenna connection (page 14)
•
HDMI connection (page 15)
•
Component Video connection (page 16)
•
Composite connection (page 16)
Antenna connection to your TV
and this unit
Connect one end of the RF cable to ANTENNA
OUT(TO TV) jack on the unit and other end to
ANTENNA IN jack on your TV. Passes the signal
from the ANTENNA IN jack to your TV/monitor.
Connect the Terrestrial TV antenna to the
ANTENNA IN jack on the unit. If you want to
use an indoor antenna, use one with a signal
amplifier rated at 5V, 100mA and set [Antenna
Feed 5V] to [ON] in the setup menu (See page
32).
Antenna Connection
NOTE
• Depending on your TV and other equipment
you wish to connect, there are various ways you
could connect the player. Use only one of the
connections described in this manual.
Rear of this unit
ANTENNA
• Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make
the best connections.
• Make sure the player is connected directly to
the TV. Tune the TV to the correct video input
channel.
• Do not connect the player’s AUDIO OUT jack to
the phono in jack (record player) of your audio
system.
• Do not connect your player via your VCR. The
image could be distorted by the copy protection
system.
RF Cable
TV
Installation
HDMI Connection
NOTE
If you have a HDMI TV or monitor, you can
connect it to this unit using a HDMI cable
(Type A, Version 1.3). Connect the HDMI
jack on the unit to the HDMI jack on a HDMI
compatible TV or monitor.
• If a connected HDMI device does not accept
the audio output of the unit, the HDMI device’s
audio sound may be distorted or may not
output.
• When you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to “Resolution Setting” on page 17.)
HDMI Connection
• Select the type of video output from the HDMI
OUT jack using [HDMI Color Setting] option on
the [Setup] menu (see page 34).
Rear of this unit
• When the HDMI connection with HDCP is not
verified, TV screen is changed to black screen.
In this case, check the HDMI connection, or
disconnect the HDMI cable.
• If there is noise or lines on the screen, please
check the HDMI cable (length is generally
limited to 4.5m).
TV
Additional Information for HDMI
•
When you connect a HDMI or DVI
compatible device make sure of the
following:
- Try switching off the HDMI/DVI device
and this player. Next, switch on the
HDMI/DVI device and leave it for around
30 seconds, then switch on this player.
- The connected device’s video input is set
correctly for this unit.
- The connected device is compatible with
720x576p, 1280x720p, 1920x1080i or
1920x1080p video input.
•
Not all HDCP-compatible HDMI or DVI
devices will work with this player.
- The picture will not be displayed properly
with non-HDCP device.
- This player does not playback and TV
screen is changed to black screen.
Set the TV’s source to HDMI (refer to TV’s
Owner’s manual).
3
Installation
• Changing the resolution when the connection
has already been established may result in
malfunctions. To solve the problem, turn off the
player and then turn it on again.
HDMI Cable
15
16
Installation
Component Video Connection
Connect the COMPONENT VIDEO OUT jacks
on the unit to the corresponding input jacks
on the TV using Y PB PR cables. Connect the left
and right AUDIO OUT jacks of the unit to the
audio left and right IN jacks on the TV using
the audio cables.
Component Connection
When you use COMPONENT VIDEO OUT
connection, you can change the resolution for the
output. (Refer to “Resolution setting” on page 17.)
Composite connection
Rear of this unit
3
NOTE
Installation
Connect the VIDEO OUT jack on the Recorder
to the video in jack on the TV using the video
cable supplied. Connect the Left and Right
AUDIO OUT jacks on the Recorder to the audio
left/right in jacks on the TV using the supplied
audio cables.
Video/Audio Connection
Rear of this unit
Audio Cable
Component Cable
Audio
Cable
Video Cable
TV
TV
Installation
Resolution Setting
The unit provides several output resolutions for
HDMI OUT and COMPONENT VIDEO OUT jacks.
You can change the resolution using [Setup]
menu.
17
5. Use U/u to select the desired resolution
then press ENTER ( ) to confirm your
selection.
1. Press HOME.
2. Use U/u/I/i to select the [Setup] and
press ENTER ( ).
The [Setup] menu appears.
3
Installation
3. Use U/u to select [DISPLAY] option then
press ENTER ( ) or i to move to the
second level.
4. Use U/u to select the [Resolution] option
then press ENTER ( ) or i to move to the
third level.
18
Installation
Connecting to an
Amplifier
Make one of the following connections,
depending on the capabilities of your existing
equipment.
3
•
HDMI Audio connection (page 18)
•
Digital Audio connection (page 19)
•
2CH Analogue Audio connection (page 19)
Connecting to an Amplifier via
HDMI Output
Connect the player’s HDMI OUT jack to the
corresponding in jack on your amplifier using
a HDMI cable. You will need to activate the
player’s digital output. (See “[AUDIO] Menu” on
pages 35-36.)
HDMI Audio Connection
Rear of this unit
Installation
Since many factors affect the type of audio
output, see “Audio Output Specifications” for
details (pages 84-85).
About Digital Multi-channel sound
A digital multi-channel connection provides
the best sound quality. For this, you need
a multi-channel Audio/Video Receiver that
supports one or more of the audio formats
supported by your unit. Check the receiver
manual and the logos on the front of the
receiver. (PCM Stereo, PCM Multi-Ch, Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, DTS
and/or DTS-HD)
HDMI Cable
Amplifier/Receiver
HDMI
Cable
TV
Connect the amplifier’s HDMI output jack to
HDMI input jack on your TV using a HDMI cable
if your amplifier has HDMI output jack.
Installation
Connecting to an Amplifier via
Digital Audio Output
Connecting to an Amplifier via
2 Channel Audio Output
Connect the player’s DIGITAL AUDIO OUT
(COAXIAL) jack to the corresponding in jack
(COAXIAL) on your amplifier.
Use an optional digital (coaxial) audio cable.
You will need to activate the unit’s digital
output. (See “[AUDIO] Menu” on page 35-36.)
Connect the Left and Right 2CH AUDIO OUT
jacks on the unit to the audio left and right
in jacks on your amplifier, receiver, or stereo
system, using audio cables.
19
2CH Analogue Audio Connection
Digital Audio Connection
Rear of this unit
3
Rear of this unit
Installation
Audio Cable
Coaxial Cable
Amplifier/Receiver
Amplifier/Receiver
20
Installation
Connecting to your
Home Network
This unit can be connected to a local area
network (LAN) via the LAN port on the rear
panel or the internal wireless module.
By connecting the unit to a broadband
home network, you have access to services
such as software updates, My Media, BD-Live
interactivity and streaming services.
3
Installation
Wired network connection
Using a wired network provides the best
performance, because the attached devices
connect directly to the network and are not
subject to radio frequency interference.
Please refer to the documentation for your
network device for further instructions.
Connect the player’s LAN port to the
corresponding port on your Modem or Router
using a commercially available LAN or Ethernet
cable (CAT5 or better with RJ45 connector).
In the example configuration for wired
connection below, this player would be able to
access content from either of the PCs.
NOTE
• When plugging or unplugging the LAN cable,
hold the plug portion of the cable. When
unplugging, do not pull on the LAN cable but
unplug while pressing down on the lock.
• Do not connect a modular phone cable to the
LAN port.
• Since there are various connection
configurations, please follow the specifications
of your telecommunication carrier or internet
service provider.
• If you want to access content from PCs or DLNA
servers, this unit must be connected to the same
local area network with them via a router.
Wired Network Connection
Router
Broadband
Service
WAN
LAN 1
PC
LAN 2
LAN 3
PC
LAN Cable
Rear of this unit
Installation
21
Wired Network Setup
If there is a DHCP server on the local area
network (LAN) via wired connection, this player
will automatically be allocated an IP address.
After making the physical connection, a small
number of home networks may require the
player’s network setting to be adjusted. Adjust
the [NETWORK] setting as follow.
Preparation
Before setting the wired network, you need to
connect the broadband internet to your home
network.
If there is no DHCP server on the network and you
want to set the IP address manually, select [Static]
then set the [IP Address], [Subnet Mask], [Gateway]
and [DNS Server] using U/u/I/i and numerical
buttons. If you make a mistake while entering a
number, press CLEAR to clear the highlighted part.
4. Select [OK] and press ENTER ( ) to apply
network settings.
5. The unit will ask you to test the network
connection. Select [OK] and press ENTER
( ) to complete the network connection.
2. The [CONNECTION SETTING] menu will
appear on the screen. Use U/u to select the
[Wired] and press ENTER ( ).
6. If you select [Test] and press ENTER( )
at step 5 above, the network connection
status is displayed on the screen.
You can also test it on the [Connection
Status] in the [Setup] menu.
3. Use U/u/I/i to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically
3
Installation
1. Select [Connection Setting] option in the
[Setup] menu then press ENTER ( ).
NOTE
22
Installation
Wireless Network Connection
Another connection option is to use an Access
Point or a wireless router. In the example
configuration for wireless connection below,
this unit would be able to access content from
either of the PCs.
The network configuration and connection
method may vary depending on t he
equipment in use and the network
environment.
3
Installation
This player is equipped with an IEEE 802.11n
(2.4 GHz band only) wireless module, which
also supports the 802.11b/g standards. For the
best wireless performance, we recommend
using a IEEE 802.11n certified Wi-Fi network
(access point or wireless router).
Available WiFi standards:
802.11b / 802.11g / 802.11n (single-band
2.4 GHz)
Wireless Network Connection
Front of this unit
Refer to the setup instructions supplied with
your access point or wireless router for detailed
connection steps and network settings.
NOTE
Wired internet connection is strongly
recommended. Using the [My Media] features,
network update and video streaming services
(such as YouTube Videos) with wireless network
can be affected by household devices using radio
frequencies.
Wireless Network Setup
For the wireless network connection, the
player needs to be set up for network
communication. This adjustment can be done
from the [Setup] menu. Adjust the [NETWORK]
setting as follows. Setting up the access
point or the wireless router is required before
connecting the player to the network.
PREPARATION
Wireless
Communication
PC
Before setting the wireless network, you need
to:
- ­connect the broadband internet to the
wireless home network.
- ­set the access point or wireless router.
- ­note the SSID and security code of the
network.
1. Select the [Connection Setting] option in
the [Setup] menu then press ENTER ( ).
or wireless router
WAN
Broadband
Service
Installation
2. The [CONNECTION SETTING] menu appears
on the screen. Use U/u to select [Wireless]
and press ENTER ( ).
23
NOTE
• WEP security mode generally have 4 keys
available on an access point or wireless router’s
setting. If your access point or wireless router
uses WEP security, enter the security code of the
key “No.1” to connect on your home network.
• An Access Point is a device that allows you to
connect to your home network wirelessly.
3. Selects [OK] and press ENTER ( ) to
continue. The new connection settings
reset the current network settings.
If you have security on your access point
or wireless router, verify that the WEP or
WPA key that was entered into the player
matches the router’s information exactly.
You need to input the security code as
necessary.
[Push Button] – If your access point or
wireless router supports Push Button
Configuration method, select this option
and press the Push Button on your access
point or wireless router within 120 counts.
You do not need to know the access point
name (SSID) and security code of your
access point or wireless router.
5. Use U/u/I/i to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
3
Installation
4. The unit scans all available access points or
wireless routers within range and displays
them as a list. Use U/u to select an access
point or wireless router on the list, and then
press ENTER ( ).
[Manual] – Your access point may not be
broadcasting its access point name(SSID).
Check your router settings through your
computer and either set your router to
broadcast SSID, or manually enter the
access point name(SSID) in [Manual].
24
Installation
NOTE
Notes on Network Connection:
•
Many network connection problems during
set up can often be fixed by re-setting the
router or modem. After connecting the
player to the home network, quickly power
off and/or disconnect the power cable of
the home network router or cable modem.
Then power on and/or connect the power
cable again.
•
Depending on the internet service provider
(ISP), the number of devices that can
receive internet service may be limited by
the applicable terms of service. For details,
contact your ISP.
•
Our company is not responsible for
any malfunction of the player and/or
the internet connection feature due to
communication errors/malfunctions
associated with your broadband internet
connection, or other connected equipment.
•
The features of BD-ROM discs made
available through the Internet Connection
feature are not created or provided
by our company, and our company is
not responsible for their functionality
or continued availability. Some disc
related material available by the Internet
Connection may not be compatible with
this player. If you have questions about such
content, please contact the producer of the
disc.
•
Some internet content may require a higher
bandwidth connection.
•
Even if the unit is properly connected and
configured, some internet content may
not operate properly because of internet
congestion, the quality or bandwidth of
your internet service, or problems at the
provider of the content.
•
Some internet connection operations may
not be possible due to certain restrictions
set by the Internet service provider (ISP)
supplying your broadband Internet
connection.
If there is no DHCP server on the network and you
want to set the IP address manually, select [Static]
then set the [IP Address], [Subnet Mask], [Gateway]
and [DNS Server] using U/u/I/i and numerical
buttons. If you make a mistake while entering a
number, press CLEAR to clear the highlighted part.
6. Select [OK] and press ENTER ( ) to apply
network settings.
3
7. The unit will ask you to test the network
connection. Select [OK] and press ENTER
( ) to complete the network connection.
Installation
8. If you select [Test] and press ENTER
( ) at step 7 above, the network
connection status is displayed on the
screen.
You can also test it on the [Connection
Status] in the [Setup] menu.
Installation
•
Any fees charged by an ISP including,
without limitation, connection charges are
your responsibility.
•
A 10 Base-T or 100 Base-TX LAN port is
required for wired connection to this player.
If your internet service does not allow for
such a connection, you will not be able to
connect the unit.
You must use a Router to use xDSL service.
•
A DSL modem is required to use DSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with
your ISP, you may not be able to use the
internet connection feature contained in
this player or you may be limited to the
number of devices you can connect at the
same time. (If your ISP limits subscription
to one device, this player may not be
allowed to connect when a PC is already
connected.)
•
The use of a “Router” may not be allowed
or its usage may be limited depending on
the policies and restrictions of your ISP. For
details, contact your ISP directly.
•
The wireless network operate at 2.4GHz
radio frequencies that are also used by
other household devices such as cordless
telephone, Bluetooth® devices, microwave
oven, and can be affected by interference
from them.
•
Turn off all unused network equipment in
your local home network. Some devices
may generate network traffic.
•
For the purpose of the better reception,
place the player asclose as possible to the
access point.
•
In some instances, placing the access point
or wireless router at least 1.5 ft (0.45m)
above the floor may improve the reception.
•
Move closer to the access point if possible
or re-orient the player so there is nothing
between it and the access point.
The reception quality over wireless depends
on many factors such as type of the access
point, distance between the player and
access point, and the location of the player.
•
Set your access point or wireless router to
Infrastructure mode. Ad-hoc mode is not
supported.
3
Installation
•
•
25
26
Installation
USB device
connection
This unit can play movie, music and photo files
contained on a USB device.
Playback content in the USB
device
3
1. Insert a USB device in to the USB port until
it fits into place.
Installation
Wireless Network Connection
5. Select a file using U/u/I/i, and press B or
ENTER ( ) to play the file.
6. Withdraw the USB device carefully after
exiting the USB mode.
NOTE
• This unit supports USB flash memory/external
HDD formatted in FAT16, FAT32 and NTFS when
accessing files (music, photo, movie). However,
for BD-Live, only FAT16 and FAT32 formats are
supported. Please use the Internal Flash Memory
or USB flash memory/external HDD formatted in
either FAT16 or FAT32 when using BD-Live.
• The USB device can be used for local storage for
enjoying BD-Live discs from the Internet.
• This unit can support up to 4 partitions of the
USB device.
• Do not extract the USB device during operation
(play, recording, etc.).
• A USB device which requires additional
programme installation when you have
connected it to a computer, is not supported.
• USB device: USB device that supports USB1.1
and USB2.0.
2. Press HOME.
3. Select [Movie], [Photo] or [Music],
using U/u/I/i, and press ENTER ( ).
• Movie, Music and photo files can be played.
For details of operations on each file, refer to
relevant pages.
• Regular back up is recommended to prevent
data loss.
• If you use a USB extension cable or USB HUB, the
USB device may not be recognized.
• Some USB device may not work with this unit.
• Digital camera and mobile phone are not
supported.
4. Select the [USB] option using
I/i, and press ENTER ( ).
• The USB Port on this unit cannot be connected
to a PC. The unit cannot be used as a storage
device.
• Unformatted media cannot be used.
Please format before using.
• If USB HDD cannot be recognized, try another
different USB cable.
• Some USB cables may not supply enough
current for normal USB operation.
Installation
Home Menu Overview
To access numerous functions of the unit, press
HOME on the remote.
Basic button operations
HOME : Accesses or removes the Home Menu.
U/u/I/i : Used to navigate on-screen displays.
ENTER ( ) : Acknowledges menu selection.
RETURN (O) : Exits the menu.
27
YouTube
Shows YouTube videos streamed from the
Youtube server via the internet to your TV.
(page 69-71)
Copy
Copies media files by connecting to various
storage devices. (page 68)
Timer Record
Displays [Timer Record] menu. (page 47)
Setup
Displays [Setup] menu. (page 28-41)
3
Installation
DTV
You can watch digital broadcasts.
(page 29-31)
Movie
Starts video media’s playback or displays
the [MOVIE] menu.
Photo
Displays [PHOTO] menu. (page 60-62)
Music
Displays [MUSIC] menu. (page 62-63)
Rec.List
Displays the Recording List menu. (page 52)
My Media
Displays and play the shared contents from
the selected server or PC. (page 63-67)
28
Installation
Settings
4. Use U/u to select a second setup option,
and press ENTER ( ) or i to move to the
third level.
Adjust the Setup Settings
You can change the settings of the unit in the
[Setup] menu.
1. Press HOME.
5. Use U/u to select a desired setting, and
press ENTER ( ) to confirm your selection.
3
Installation
2. Use U/u/I/i to select [Setup] and press
ENTER ( ). The [Setup] menu appears.
3. Use U/u to select a first setup option,
and press ENTER ( ) or i to move to the
second level.
Installation
Settings for Digital TV
To use DTV functions, this recorder needs some
settings in advance.
Selecting a Region
1. Press HOME.
2. Use U/u/I/i to select [Setup], and press
ENTER ( ).
3. Use U/u to select [DTV] , and press ENTER (
).
Scanning programmes
automatically
All available digital TV or radio programmes are
searched for and stored automatically based
on the selected region.
1. Display [Setup] menu.
2. Use U/u/I/i to select [Auto Programming]
and press ENTER ( ).
3. Use U/u to select [Auto Scan] and press
ENTER ( ) to start the programme
scanning.
3
Installation
4. Use U/u to select [Region] and press ENTER
( ).
5. Use U/u to select a region where you
operate this unit, and press ENTER ( ).
NOTE
If the [DTV Lock System] option is set to [On], this
function is not available (page 31).
29
Select [Cancel] and press ENTER ( ) to cancel.
NOTE
• This option is not available while recording or if
the [Permanent Timeshift] option is set to [On].
• If the [DTV Lock System] option is set to [On],
this function is not available (page 31).
30
Installation
Scanning programmes
manually
Scans digital TV or radio programmes and adds
the detected programmes to the programme
list.
1. Display [Setup] menu.
2. Use U/u/I/i to select [Auto Programming]
and press ENTER ( ).
3. Use U/u to select [Manual Scan] and press
ENTER ( ) to display the [Manual Scan]
menu.
Editing Programme List
You can remove any digital TV or radio
programs stored on this recorder using the
[Program edit] menu.
1. Display [Setup] menu.
2. Use U/u/I/i to select [Program Edit] and
press ENTER ( ).
3. Use U/u to select [DTV] and press ENTER to
display the [Edit - TV] menu.
4. Press yellow coloured (C) button to toggle
between the TV and Radio programme lists.
3
Installation
4. Use I/i to select the desired multiplexer
(MUX), and press ENTER( ) to start
scanning.
OR
If you know the programme bandwidth and
frequency, use I/i to select the desired
[Bandwidth], and fill the [Frequency] field in
using the numerical buttons.
5. Press ENTER ( ) to start programme
scanning.
NOTE
• This option is not available while recording or
the [Permanent Timeshift] option is the [Setup]
menu is set to [On].
• If the [DTV Lock System] option is set to [On],
this function is not available (page 31).
[Edit - TV] or [Edit - Radio] menu shows the
signal strength ( ) and quality ( ) of the
current programme at the bottom.
5. Use U/u to select a programme you want
to delete from the list, and press blue
coloured (D) button.
If you do not want to remove the
programme, select [No] and press ENTER
( ) on the popup menu.
6. Press RETURN (O) to return to the TV
screen.
NOTE
This option is not available while recording or if the
[Permanent Timeshift] option is set to [On].
Installation
31
Setting the DTV Lock System
Allows you to activate or deactivate all of the
lock schemes previously set. When the [DTV
Lock System] is set to [Off ], the [TV Rating]
option is not effective.
1. Display [Setup] menu.
2. Use U/u/I/i to select [LOCK] and press
ENTER ( ).
3. Use U/u to select [DTV Lock System] and
press ENTER ( ).
5. Use U/u to select [On] and press ENTER ( )
to activate the DTV Lock system.
Adjusting DTV Rating level
Viewing of some digital TV programmes can
be limited according to the age limit you set.
1. Display [Setup] menu.
2. Use U/u to select [LOCK] and press ENTER.
3. Use U/u to select [DTV Rating] and press
ENTER ( ).
4. Input the password using numerical
buttons.
If you have not set your password
yet, input “0000” and press ENTER (
Allow All
You can view all programs.
3
Refer to the table below for the rating levels.
Rating Level
P
C
G
PG
M
MA
AV
R
Age
5-6
7-8
9-10
11-12
13-14
15-16
17
18
Block All
All programs are locked. To view a
programme, you must input the 4-digit
password you have created.
NOTE
If the [DTV Lock System] is set to [Off ] in the [Setup]
menu, the [DTV Rating] option is not available.
Installation
4. Input the password using numerical
buttons.
If you have not set your password yet, input
“0000” and press ENTER ( ).
5. Use U/u to set the limitation level and press
ENTER ( ).
32
Installation
Setting the antenna power
If you are using indoor antenna with a signal
amplifier rated at DC 5V, 100mA, the recorder
can supply power through ANTENNA IN jack.
3. Use U/u to select [Permanent Timeshift]
and press ENTER ( ).
1. Display [Setup] menu.
2. Use U/u/I/i to select [Antenna Feed 5V]
and press ENTER ( ).
3. Use U/u to select [On], and press ENTER
( ) to supply antenna power.
4. Use U/u to select [On] to apply permanent
timeshift.
3
Installation
Setting a recording storage
location
You can set the storage location where you
want to store the DTV recordings.
1. Display [Setup] menu.
NOTE
The [Antenna Feed 5V] option must be set to [Off ]
when your indoor antenna is supplied the power
from the mains. If you set the [Antenna Feed 5V]
option to [On] for the indoor antenna which is
supplied power from the mains, it may cause
serious defect to this unit.
2. Use U/u to select [OTHERS], and press
ENTER ( ).
3. Use U/u to select [REC Device] and press
ENTER ( ).
Setting the permanent
Timeshift
You can set the Time Shift function
automatically without pressing TIME SHIFT
button. The timeshift will start after Digital TV
tuner mode is started.
1. Display [Setup] menu.
2. Use U/u to select [DTV], and press ENTER
( ).
4. Use U/u to select a storage location, and
press ENTER ( ).
NOTE
This option is not available while recording.
Installation
[DISPLAY] Menu
TV Aspect Ratio
Select a TV aspect ratio option according to
your TV type.
[4:3 Letter Box]
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking
bars above and below the picture.
[16:9 Original]
Select when a 16:9 wide TV is connected.
The 4:3 picture is displayed with an original
4:3 aspect ratio, with black bars appearing
at the left and right sides.
[16:9 Full]
Select when a 16:9 wide TV is connected.
The 4:3 picture is adjusted horizontally (in a
linear proportion) to fill the entire screen.
NOTE
You cannot select [4:3 Letter Box] and [4:3 Pan
Scan] option when the resolution is set to higher
than 720p.
Resolution
Sets the output resolution of the Component
and HDMI video signal. Refer to page 17 and
86 for details about the resolution setting.
[Auto]
If the HDMI OUT jack is connected to
TVs providing display information (EDID),
this automatically selects the resolution
best suited to the connected TV. If the
COMPONENT VIDEO OUT only is connected,
this changes the resolution to 1080i as
default resolution.
[1080p]
Outputs 1080 lines of progressive video.
[1080i]
Outputs 1080 lines of interlaced video.
[720p]
Outputs 720 lines of progressive video.
[576p]
Outputs 576 lines of progressive video.
[576i]
Outputs 576 lines of interlaced video.
1080p Display Mode
When the resolution is set to 1080p, select
[24Hz] for smooth presentation of film material
(1080p/24Hz) with a HDMI-equipped display
compatible with 1080p/24Hz input.
3
Installation
[4:3 Pan Scan]
Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV
screen. Both sides of the picture are cut off.
33
34
Installation
NOTE
• When you select [24Hz], you may experience
some picture disturbance when the video
switches video and film material. In this case,
select [50Hz].
• Even when [1080p Display Mode] is set to
[24Hz], if your TV is not compatible with
1080p/24Hz, the actual frame frequency of the
video output will be 50Hz to match the video
source format.
3
• When the 1080p/24Hz video source is output
via HDMI connection, the VIDEO OUT and
COMPONENT VIDEO OUT will not output any
video signal.
Installation
HDMI Color Setting
Select the type of output from the HDMI OUT
jack. For this setting, please refer to the manual
of your display device.
[YCbCr]
Select when connecting to a HDMI display
device.
[RGB]
Select when connecting to a DVI display
device.
[LANGUAGE] Menu
Display Menu
Select a language for the [Setup] menu and
on-screen display.
Disc Menu/Disc Audio/Disc Subtitle
Select the language you prefer for the audio
track (disc audio), subtitles, and the disc menu.
[Original]
Refers to the original language in which the
disc was recorded.
[Other]
Press ENTER ( ) to select another language.
Use number buttons then press ENTER ( )
to enter the corresponding 4-digit number
according to the language code list on
page 80.
[Off] (Disc Subtitle only)
Turn off Subtitle.
NOTE
Depending on the disc, your language setting may
not work.
DTV Audio
Digital channels sometimes provide multiple
audio tracks, often in a different language.
You can set a default audio language with this
setting. If provided by the broadcaster, you can
also select a different audio language while
viewing TV by pressing AUDIO repeatedly. (See
“Selecting DTV audio language” on page 43.)
Installation
DTV Subtitle
Digital channels sometimes provide subtitles,
often in a different language. You can set a
default subtitle language with this setting, if
DTV subtitles are provided by the broadcaster.
Press SUBTITLE repeatedly to select a subtitle
language while viewing digital TV.
(See “Selecting DTV subtitle language” on page
44.)
[AUDIO] Menu
[Primary Pass-Thru]
Select if you connect this unit’s DIGITAL
AUDIO OUT and HDMI OUT jack to a device
with LPCM, Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, DTS and DTS-HD decoder.
NOTE
• When [HDMI] option is set to [PCM Multi-Ch],
the audio may output as PCM Stereo if the PCM
Multi-Ch information is not detected from HDMI
device with EDID.
• If the [Digital Output] option is set to
[Re-encode], the Re-encode audio is output for
BD-ROM discs with secondary audio and the
original audio is output for the other discs (like
[Primary Pass-Thru]).
NOTE
Since many factors affect the type of audio output,
see “Audio Output Specifications” on pages 84-85
for details.
Digital Output
Select the output sound format when a device
equipped with a HDMI or Digital Audio input
jack is connected to the HDMI OUT or DIGITAL
AUDIO OUT jack on this unit.
[PCM Stereo]
Select if you connect this unit’s HDMI OUT
or DIGITAL AUDIO OUT jack to a device with
two-channel digital stereo decoder.
[PCM Multi-Ch] (HDMI only)
Select if you connect this unit’s HDMI OUT
jack to a device with multi-channel digital
decoder.
[Re-Encode]
Select if you connect this unit’s HDMI OUT
or DIGITAL AUDIO OUT jack to a device with
a DTS decoder.
Sampling Freq.
[192KHz]
Select this if your A/V Receiver or Amplifier
is capable of handling 192 KHz signals.
[96KHz]
Select this if your A/V Receiver or Amplifier
is NOT capable of handling 192 KHz signals.
When this choice is made, this unit
automatically converts any 192 KHz signals
to 96 KHz so your system can decode them.
[48KHz]
Select this if your A/V Receiver or Amplifier
is NOT capable of handling 192 KHz and 96
KHz signal. When this choice is made, this
unit automatically converts any 192 KHz
and 96 KHz signals to 48 KHz so your system
can decode them.
Check the documentation for your A/V
Receiver or Amplifier to verify its capabilities.
3
Installation
Each disc has a variety of audio output options.
Set the player’s Audio options according to the
type of audio system you use.
35
36
Installation
DRC (Dynamic Range Control)
When a file encoded in Dolby Digital or Dolby
Digital Plus is playing back, you may wish to
compress the dynamic range of the audio
output (the difference between the loudest
sounds and the quietest ones). This allows you
to listen to a movie at a lower volume without
losing clarity of sound. Set [DRC] to [On] for
this effect.
NOTE
3
The DRC setting can be changed only when a
disc is not inserted or the unit is in complete stop
mode.
[LOCK] Menu
The [LOCK] settings affect only BD and DVD
playback.
To access any features in the [LOCK] settings,
you must enter the 4-digit security code you
have created.
If you have not entered a password yet, you are
prompted to do so. Enter a 4-digit password
twice, and press ENTER ( ) to create a new
password.
Password
Installation
You can create or change the password.
[New]
Enter a 4-digit password twice, and press
ENTER ( ) to create a new password.
[Change]
Enter the current password and press ENTER
( ). Enter a 4-digit password twice, and
press ENTER ( ) to create a new password.
If you forget your password
If you forget your password, you can clear it
using the following steps:
1. Remove any disc that might be in the
player.
2. Select [Password] option in the [Setup]
menu.
3. Use Number buttons to enter “210499”. The
password is cleared.
NOTE
If you make a mistake before pressing ENTER, press
CLEAR. Then input the correct password.
Installation
DVD Rating
Blocks playback of rated DVD based on their
content. (Not all discs are rated.)
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select unlock, parental control is not
active and the disc plays in full.
BD Rating
[255]
All BD-ROM can be played.
[0-254]
Prohibits play of BD-ROM with
corresponding ratings recorded on them.
[NETWORK] Menu
The [NETWORK] settings are needed to use
the software update feature, BD Live and My
Media.
Connection Setting
If your home network environment is ready
to be connected to the unit, the unit needs
to be set to the wired or wireless network
connection for network communication. (See
“Connecting to your Home Network” on pages
20-25.)
Connection Status
If you want to check the network status on
this unit, select the [Connection Status] option
and press ENTER ( ) to check whether a
connection to the network and the internet
has been established.
BD-LIVE connection
Area Code
Enter the code of the area whose standards
were used to rate the DVD video disc, based
on the list on page 79.
DTV Lock System
Allows you to set up specific programs and
ratings through blocking schemes. Also
allows you to activate or disable all of the
lock schemes previously set up. A password
is required to gain access to the lock menu
options. When the DTV Lock System is set to
[OFF], the [DTV Rating] is not effective. (See
“Setting the DTV Lock System” on page 31.)
DTV Rating
You can set the rating to block out all the
programs with rating above a specified level.
(See “Adjusting TV Rating level” on pages 31.)
You can restrict Internet access when BD-LIVE
functions are used.
[Permitted]
Internet access is permitted for all BD-LIVE
contents.
[Partially permitted]
Internet access is permitted only for BDLIVE contents which have content owner
certificates. Internet access and AACS
Online functions are prohibited for all BDLIVE contents without a certificate.
[Prohibited]
Internet access is prohibited for all BD-LIVE
contents.
3
Installation
Set an age limit for BD-ROM play. Use number
buttons to input an age limit for BD-ROM
viewing.
37
38
Installation
[DTV] Menu
Region
Select a region where you operate this
recorder. Refer to page 29 for more information.
Auto Programming
This option scans a programme and sets the
available programmes. Refer to page 29-30 for
more information.
3
Program Edit
Installation
This option allows you to edit the TV or Radio
programmes. Refer to page 30 for more
information.
Time
The clock must be set in order to use timer
recording.
[Auto]
Select a programme that broadcasts
a clock signal and the clock will be set
automatically. If the time that has been
automatically set is not correct when
compared your local time, you can set
additional time option. Select an option
relative to GTM in [Time Zone].
[Manual]
If there is no channel that broadcasts a
clock signal in your area, you can set the
time and date manually. Use I/i to select
each field, and input correct time and date
using U/u, and press ENTER ( ).
Antenna Feed 5V
If you are using an indoor antenna, use one
with a signal amplifier rated at DC 5V, 100mA
and set this option to [On]. Refer to page 32 for
more information.
Permanent Timeshift
Set this option to [On] to use the Time Shift
function automatically without pressing the
TIME SHIFT button. The timeshift will start after
TV viewing is started. Refer to page 32 for more
information.
Installation
[OTHERS] Menu
Power Save Mode
Selects whether this recorder is in power
save mode when the power is turned off. This
option is not available when a timer recording
is set.
[On]
The front panel display is off and only
signals arriving at the antenna input are
passed through when the recorder is
turned off.
REC Device
This option sets the storage where your TV
recording will be stored. Select an option
between [HDD] or [USB], and press ENTER ( )
to set. Refer to page 32 for more information.
NOTE
• When you select [USB], make sure that there is
sufficient space for the recording on the USB
device.
• This option is not available while recording.
BD Storage Select
This player can store some BD-ROM disc
related information, including downloaded online content such as movie trailers and special
features into the internal Flash Memory or an
USB device.
[Built-In Storage]
Store the downloaded Blu-ray disc content
on the Internal Flash Memory.
[USB Storage]
Store the downloaded Blu-ray disc content
on the connected USB device.
3
BD Storage Clear
Removes the BD contents from the built-in
storage or the connected USB storage.
[Built-In Storage]
Delete all the downloaded contents from
the built-in storage.
[USB Storage]
Delete all the downloaded contents from
the connected USB storage.
NOTE
If you select USB Storage, playback, copying and
recording on the USB device is disabled.
Installation
[Off]
Turns off the [Power Save Mode] function.
39
40
Installation
HDD Format
DivX VOD
Everything recorded on the HDD will be
erased.
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, Inc. This is an official
DivX Certified device that plays DivX video.
Visit www.divx.com for more information and
software tools to convert your files into DivX
video.
1. Press HOME.
2. Use U/u/I/i to select [Setup] in the
[Home] menu, and press ENTER ( ).
3. Use U/u to select [OTHERS] option from the
[Setup] menu, and press ENTER ( ).
4. Use U/u to select [HDD Format], and press
ENTER ( ) to display the sub-options.
3
5. Use I/i to select [OK], and press ENTER
( ).
Installation
Select [Cancel] and press ENTER ( ) to
cancel.
Warning message appears on the screen.
6. Use U/u to adjust the buffer for timeshift
function, and press ENTER ( ) while [Next]
option is highlighted.
This option is available only when you are
formatting the HDD.
Select [Back] and press ENTER ( ) to return
to the previous menu.
7. Use I/i to select the [Format], and press
ENTER ( ) to start the HDD format.
Select [RETURN] and press ENTER ( ) to
return to the previous menu.
8. After HDD format is finished, press ENTER
( ) to reboot the recorder.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to
play DivX Video-on-Demand (VOD) content.
To generate the registration code, locate the
DivX VOD section in the device setup menu.
Go to vod.divx.com with this code to complete
the registration process and learn more about
DivX VOD.
[DivX reg. Code]
Displays the registration code of your player.
[Deactivate]
Deactivate your unit and display the
deactivation code.
NOTE
All the downloaded videos from DivX VOD with the
unit’s registration code can only be played on the
unit’s internal hard disk drive or USB device.
Factory Set
You can reset the unit to its original factory
settings.
NOTE
If you reset the unit to its original factory settings
using [Factory Set] option, you have to set the
network settings activation again.
Installation
Software Update
Disclaimer Notice
You can update the software by connecting
the unit directly to the software update server
(see page 82-83).
Press ENTER ( ) to view the notice of Network
Service Disclaimer on page 88.
41
Software Update (DTV)
You can also update to the latest software
through the built in digital tuner.
NOTE
• DTV antenna must be connected to the
ANTENNA IN jack on the rear panel.
• Stop recording before using update function.
2. Use U/u/I/i to select [Setup] in the Home
menu, and press ENTER ( ).
3. Use U/u to select [OTHERS] option from the
[Setup] menu, and press ENTER ( ).
4. Use U/u to select [Software Update (DTV)],
and press ENTER ( ) to display the
sub-options.
5. Use U/u to select [Operation mode], and
press ENTER ( ).
6. Use I/i to select [Yes], and press ENTER
( ) to search for a new update.
The recorder will check for the newest
update.
If there is no update available, the Message,
“No software” appears.
7. Press ENTER ( ) to select [Yes], and press
ENTER ( ) to start software update.
8. When the update is completed, the
message, “Update is complete.” will appear,
and the power will turn off automatically
after 5 seconds.
9. Turn the power back on. The system now
operates with the new version.
Installation
1. Press HOME.
3
42
Operation
4
Operation
Using the Digital TV
functions
You can watch and record the digital TV
programmes or playback the recorded TV
programmes you want to watch using this
unit.
Changing Digital TV
programmes
Generally, press PR (U/u) or U/u to select the
programme position, or entering a programme
number using numerical buttons. If you want
to change the programme on the programme
list, follow the instruction as below.
1. While watching DTV, press ENTER ( ) or PR
LIST.
4
Operation
Viewing the Digital TV
Viewing the Digital TV broadcasting on the TV
screen.
NOTE
• DTV antenna connection is required. (page 14)
• DTV settings such as [Auto Programming] in the
[Setup] menu may be required. (page 29)
2. Press yellow coloured (C) button to toggle
menu between [TV List] and [Radio List].
1. Press 1 (POWER) to turn on the recorder.
3. Use U/u to select a desired programme,
and press ENTER ( ).
2. Use U/u/I/i to select [DTV] on the HOME
menu and press ENTER ( ).
4. Press RETURN (O) to exit the programme
list.
Operation
Setting favourite programmes
You can set the storage location where you
want to store the DTV recordings.
1. While watching DTV, press ENTER ( ) or PR
LIST
43
Viewing the programme
information
You can view a description of the programme
being broadcast.
2. Press yellow coloured (C) button to toggle
menu between [TV List] and [Radio List].
3. Use U/u to select a programme you want
to add on the Favourite List.
4. Press green coloured (B) button to set the
programme as a favourite programme.
1. While watching DTV, press INFO/DISPLAY to
display the programme information.
The mark appears for the favourite
programmes.
To cancel the favourite programmes, select
a programme with mark, and press red
coloured button.
5. Press A coloured (Red) button to display the
favourite programme list.
Selecting DTV audio language
Some digital programmes may broadcast
several audio languages or encoding methods.
You can select an audio language or an
encoding method when it is available.
1. While watching DTV, press AUDIO.
On the Favourite List menu, press yellow
coloured (C) button to toggle menu
between TV FAV List and Radio FAV List.
2. Use I/i to select an audio language or an
encoding method, and press ENTER ( ).
4
Operation
2. Press INFO/DISPLAY again to close the
programme information.
44
Operation
Selecting DTV subtitle
language
Viewing the EPG (Electronic
Programme Guide) Display
Some digital programmes may broadcast
several subtitle languages. You can select a
subtitle language when it is available.
The Electronic Programme Guide is a guide
showing the programme schedule for a day or
more at a time.
1. While watching DTV, press SUBTITLE.
1. Press GUIDE while watching Digital TV.
2. Use I/i to select a subtitle language, and
press ENTER ( ).
NOTE
4
You can find a programme that supports subtitle
language on the programme information.
For the programmes with subtitle, SUB icon
appears on the programme information.
The EPG screen appears and it updates
automatically if the EPG data is acquired
successfully.
2. Select an item using I/i and adjust the
selected item using U/u.
The adjustable items are c , d and e.
c
d
e
a
Operation
b
a Shows the Live Digital TV programme
that you have chosen on the programme
field.
b Indicates the detailed information of the
currently selected programme.
c Indicates the currently selected date.
Use U/u to select a different date.
d Indicates the current programme name.
Use U/u to change the programme.
e Indicates the programme guide of
the selected programme. Shows the
start time, end time and title of the
programme.
NOTE
Digital Services availability and contents may differ
depending on the broadcaster.
Operation
Using the timeshift function
manually
You can pause a Live TV broadcast, then
continue watching the programme at a
later time. This is useful when you receive an
unexpected call or visitor while watching TV.
The following are operating steps when the
[Permanent Timeshift] option is set to [Off ].
1. Press TIME SHIFT while watching a TV
broadcast. The picture pauses, and the
recorder starts recording the current TV
programme to the HDD.
2. Press B to resume watching the
programme.
Press INFO/DISPLAY to display the progress
of timeshift.
Using the permanent timeshift
If you set the [Permanent Timeshift] option
to [On], live TV broadcast will automatically
be recorded to the HDD without pressing
the TIME SHIFT button. The timeshift will start
automatically when the Digital TV tuner mode
is started.
Refer to “Setting the permanent Timeshift”
on page 32 to set the [Permanent Timeshift]
option.
1. Press 1 (POWER) to turn on the unit.
2. Use U/u/I/i to select [DTV] and press
ENTER.
The timeshift function will automatically
start.
Press . / > to move the starting
point or the ending point of timeshift.
Press . / > to move the starting
point or the ending point of timeshift.
Press m / M to playback of timeshift
fast forward or fast reverse.
Press m / M to playback of timeshift
fast forward or fast reverse.
Press M while in pause mode to slow
down the timeshift playback speed. Press
M repeatedly to change the playback
speed.
Press M while in pause mode to slow
down the timeshift playback speed.
Press M repeatedly to change the
playback speed.
3. Press HOME to exit from the DTV viewing.
3. Press x to cancel the timeshift.
Timeshift cannot be saved as a recorded
title.
4
Operation
45
46
Operation
Using the teletext (Viewing
Teletext)
Teletext service may not be broadcast in
your area.
Many Digital TV programmes broadcast
information via their text service, and this
recorder has access to dedicated text
programmes transmitted by the broadcasters.
Recording TV
programmes
You can record Digital TV programmes, and
store them on the HDD or USB device.
PREPARATION
- Select the recording location using [REC
Device] option on the SETUP menu. (page
32).
- Connect a USB device, if [REC Device]
option is set to [USB].
4
Operation
1. Press TEXT while watching TV.
Normal Recording
2. Use green or yellow coloured (B or C)
button to select a page.
1. Use PR (U/u) or U/u to select a programme
you want to record.
2. Press z REC to start recording.
You can also select a page by entering a
three digit number with the numerical
buttons.
3. Press TEXT to exit the teletext screen.
NOTE
Additionally, you now have four coloured buttons
to navigate through the content of the page. The
use of these coloured buttons will be displayed on
the screen.
Press X to pause recording, press X again
to resume recording.
You can watch another programme while
recording.
3. Press x to stop recording.
To stop recording, you must move to the
programme being recorded before pressing
x.
NOTE
• TV recordings will be stored in the [REC] folder
of the storage you’ve set in the [REC Device].
• Only HDD type USB storages are Available for
USB recording. Flash type USB storages are not
available for recording.
Operation
Dual Programme Recording
You can record two Digital TV programmes at
the same time.
1. Use PR (U/u) or U/u to select a programme
you want to record.
2. Press z REC to start recording.
3. Use PR (U/u) or U/u to select another
programme you want to record.
3. Select an item using I/i and adjust it using
U/u.
The adjustable items are listed below.
PR
Sets the programme position.
Date
Sets the date.
Start
Sets the start time.
End
Sets the end time.
Repeat
Choose a desired repeat mode.
(Once, Everyday, Mon-Fri,
Mon-Sat or Weekly)
4. Press z REC to start recording.
While recording two programmes
simultaneously, you can only watch the
programmes being recorded.
NOTE
• The timer recording can be set from 3 minutes
after the current time.
5. Press x to stop recording.
To stop recording, you must move to the
programme being recorded before pressing
x.
• Timer recording is not available on a USB device.
5. Select [OK] then press ENTER ( ).
You can set the timer for a total of 32
programmes, up to 30 days in advance.
If you input the wrong information, an
error message will appear and the timer
recording cannot be made.
Select [Cancel] and press ENTER ( ) to
cancel.
1. While watching TV, press TIMER REC.
4
Operation
4. Press ENTER ( ) and the confirm message
appears.
Timer Recording (Manual)
2. Use U/u to select [NEW], and press ENTER
( ).
47
48
Operation
Timer Recording (EPG)
Canceling a timer recording
You can also set the timer based on the
information provided by the EPG.
You can cancel a timer recording before the
timer recording actually starts.
1. While watching TV, press GUIDE.
1. While watching TV, press TIMER REC.
2. Use U/u to select a schedule you want to
cancel.
3. Press the blue coloured (D) button.
4. Use I/i to select [Delete one], and press
ENTER ( ).
2. Use I/i to select date field, and select the
date of recording schedule using U/u.
4
3. Use I/i to select programme field, and set
the programme using U/u.
Operation
4. Use I/i to select the programme list, and
select a programme you want to record
using U/u.
5. Press z REC..
For the successfully scheduled programme,
a red bullet mark appears.
A red bullet mark may not appear for
unavailable programme to record.
6. Press RETURN (O) to return to the TV
viewing.
7. Press TIMER REC, and check whether the
schedule is registered properly or not.
Select [Cancel] and press ENTER ( ) to
cancel.
Select [Delete all] and press ENTER ( ) to
delete whole schedules.
Operation
Checking a timer history
Instant Timer Recording
You can check if the timer recording is
completed or not on the [Timer Record
History] menu. The [Result] column shows “OK”
or ”Fail”.
You can set the recording time instantly to
stop the recording automatically.
1. While watching TV, press TIMER REC.
2. Press yellow coloured (C) button to display
the [Timer Record History] menu.
49
1. Use PR (U/u) or U/u to select a programme
you want to record.
2. Press z REC. to start recording.
3. While recording, press z REC. repeatedly to
set the recording duration.
Continue (Normal recording) => 10M =>
20M => 30M => 60M => 90M => 120M =>
Continue
4. Press x to stop recording.
To delete an item, select an item and press
ENTER ( ). And select [OK] and press ENTER
( ) to delete the history.
Editing a timer recording
You can edit a pre-scheduled timer recording
before the timer recording actually starts.
1. While watching TV, press TIMER REC.
2. Use U/u to select a schedule you want to
edit.
3. Press ENTER ( ) to display the [Timer
Record] menu.
3. Follow the steps 3-5 from “Timer Recording
(Manual)” on page 47 to complete the
editing.
4
Operation
50
Operation
General Playback
5. Select the [Data] option using I/i, and
press ENTER ( ).
Playing Discs
1. Press OPEN/CLOSE(Z) and place a disc on
the disc tray.
This step is needed only when a disc and/or
a USB device is connected simultaneously
to this unit.
6. Select a file using U/u/I/i, and press B or
ENTER ( ) to play the file.
2. Press OPEN/CLOSE(Z) to close the disc tray.
4
Operation
For most Audio CD, BD-ROM and
DVD-ROM discs, playback starts
automatically.
3. Press HOME.
NOTE
4. Select [Movie], [Photo] or [Music] using
U/u/I/i, and press ENTER ( ).
• Playback functions described in this manual are
not always available in every files and media.
Some functions can be restricted depending on
many factors.
• Depending on the BD-ROM titles, a USB device
connection may be needed for proper playback.
Operation
Playing HDD or USB
The unit can play movie, music and photo files
on the HDD or USB.
Before playing movie, music or photo files, read
“File requirement” on page 10.
1. Press HOME.
2. Use U/u/I/i to select [Movie], [Photo]
or [Music] in the [Home] menu, and press
ENTER.
To stop playback
Press x during playback.
To pause playback
Press X during playback.
Press X repeatedly to play back Frame-byFrame.
To scan forward or backward
[USB]
Displays media (Movie, Music, Photo) files
stored in a connected USB device.
To skip to the next/previous chapter/track/file
4. Use I/i to select a media type (Movie,
Music or Photo).
5. Use U/u to select a file you want to play.
Use U/u to select a folder, and press ENTER.
A list of files and sub-folders in the folder
appears.
If you want to move to the upper directory,
press RETURN (O) or use U/u to select and
press ENTER ( ).
Press INFO/DISPLAY while selecting a movie
file to display the detailed file information.
6. Press B or ENTER ( ) to play the selected
file.
During playback, press . or > to go to
the next chapter/track/file or to return to the
beginning of the current chapter/track/file.
Press . twice briefly to step back to the
previous chapter/track/file.
In the [My Media] menu, there may be many
types of media files in the current folder
together. In this case, press . or > to go
to the previous or next media file of the same
type.
Using the disc menu
BD
DVD
AVCHD
To display the disc menu
The menu screen may be displayed first after
loading a disc which contains a menu. If you
want to display the disc menu during playback,
press DISC MENU.
Use U/u/I/i buttons to navigate through
menu items.
4
Operation
[HDD]
Displays media (Movie, Music, Photo) files
stored in HDD.
Press m or M to play fast forward or fast
reverse during playback.
You can change the various playback speeds
by pressing m or M repeatedly.
While the playback is paused, press M
repeatedly to play various speed of slow
motion.
3. Select a storage type using I/i and press
ENTER.
51
52
Operation
To display the Pop-up menu
Some BD-ROM discs contain a Pop-up menu
that appears during playback.
Press TITLE/POPUP during playback, and use
U/u/I/i buttons to navigate through menu
items.
Resume playback
Sorting the recorded titles
REC
1. Press HOME.
2. Use I/i to select [Rec. List], and press
ENTER ( ).
3. Press red coloured (A) button to access the
sorting menu.
BD DVD AVCHD MOVIE MOVIE-N
ACD MUSIC MUSIC-N REC
MOVIE-M MUSIC-M
This unit remembers the point where you
pressed the x. depending on the disc.
If “Xx (Resume Stop)” appears on the screen
briefly, press B to resume playback (from the
scene point).
4
Operation
If you press x twice or unload the disc (“x”
appears on the screen.), the unit will clear the
stopped point.
4. Use U/u to select a sorting method from
[Latest], [Time] or [Title Name].
Latest : sorted by recorded date.
NOTE
• The resume point may be cleared when a
button is pressed (for example; 1 (POWER),
OPEN/CLOSE, etc).
• On BD-Video discs with BD-J, the resume
playback function does not work.
• If you press x once during BD-ROM interactive
title playback, the unit will be in Complete Stop
mode.
Time : sorted by recorded time in numerical
order.
Title Name : by title name in alphabetical
order.
Operation
Playing selected files
REC
MOVIE-M
MUSIC-M PHOTO-M
Naming a file
REC
MOVIE-M
MUSIC-M PHOTO-M
You can play only selected files, using the
MARKER on the file list.
You can rename the selected file on HDD or
USB.
1. Follow the steps 1-5 from “Playing HDD or
USB” on page 51 to select files.
1. Follow the steps 1-5 from “Playing HDD or
USB” on page 51 to select a file.
2. Press MARKER when the required file is
highlighted.
2. Press EDIT to display the option menu.
You can mark multiple files using MARKER
button.
3. Press EDIT to display option menu.
53
3. Use U/u to select [Rename], and press
ENTER ( ) to display the virtual keyboard.
4. Use U/u/I/i to select a character, and
press ENTER to confirm your selection
To unmark all marked files, select the
[Unmark ALL] on the option menu.
4. Use U/u to select [Select play], and press
ENTER ( ) to play selected files.
4
REC
MOVIE-M
MUSIC-M PHOTO-M
You can delete files/folders from the HDD or
USB.
Select [Alphabet Capital], [Alphabet Small]
or [Symbol], and press ENTER ( ) to change
the character set of the virtual keyboard
1. Follow the steps 1-5 from “Playing HDD or
USB” on page 51 to select a file.
[Space] – Inserts a space at the cursor
position.
2. Press EDIT to display option menu.
[Delete] – Delete a previous character
at the cursor position.
3. Use U/u to select [Delete], and press ENTER
to delete the file.
If you want to delete multiple files and/or
folders from the HDD or USB, press MARKER
on each file, folder and select the [Select
Delete] on the option menu.
To unmark all marked files, select the
[Unmark ALL] on the option menu.
[ /
right.
] – Moves cursor to the left or
[OK] – Complete naming.
[Cancel] – Cancels the naming, and
return to the previous menu.
5. Use U/u/I/i to select [OK] and press
ENTER ( ) to complete the naming process.
Operation
Delete a file/folder from the
list
54
Operation
Advanced Playback
Repeat Playback
NOTE
• If you press > once during Repeat Chapter/
Track playback, the repeat playback cancels.
• This function may not work on some disc or title.
BD DVD AVCHD ACD MUSIC
MUSIC-N REC
During playback, press REPEAT repeatedly to
select a desired repeat mode.
4
BDs/DVDs/Movie files
A- – Selected portion will be repeated
continually.
Chapter – The current chapter will be
played back repeatedly.
Title – The current title will be played
back repeatedly.
Track – The current track or file will be
played back repeatedly.
Operation
To return to normal playback, press REPEAT
repeatedly to select [Off ].
Audio CDs/Music files
– The current track or file will be
played back repeatedly.
– All the tracks or files will be played
back repeatedly.
– The tracks or files will be played back
in random order.
– All the tracks or files will be
played back repeatedly in random order.
– Selected portion will be repeated
continually. (Audio CD only)
To return to normal playback, press CLEAR.
REC (File recordings)
– The current file will be played back
repeatedly.
– All files in the current directory will
be played back repeatedly.
Repeating a specific portion
BD
DVD AVCHD ACD
This unit can repeat a portion you have
selected.
1. During playback, press REPEAT to select [A-]
at the beginning of the portion you wish to
repeat.
2. Press ENTER ( ) at the end of the portion.
Your selected portion will be repeated
continually.
3. To return to normal playback, press REPEAT
repeatedly to select [Off ]
NOTE
• You cannot select a portion less than 3 seconds.
• This function may not work on some disc or title.
Enlarge the playback image
BD DVD AVCHD MOVIE MOVIE-N
PHOTO
1. During playback or pause mode, press
ZOOM to display the [Zoom] menu.
2. Use green or yellow coloured (B or C)
buttons to zoom out or in on the still image.
You can move through the zoomed picture
using U/u/I/i buttons.
3. Press RETURN (O) to exit the [Zoom]
menu.
Operation
Marker Search
BD
DVD AVCHD MOVIE MOVIE-N
You can start playback from up to nine
memorized points.
To enter a marker
1. During playback, press MARKER at the
desired point. The Marker icon appears on
the TV screen briefly.
55
Changing content list view
MOVIE MOVIE-N ACD
MUSIC-N PHOTO
MUSIC
On the [Movie], [Music], [Photo] and [My
Media] menu, you can change the content list
view.
Method
Press INFO/DISPLAY button repeatedly.
2. Repeat step 1 to add up to nine markers.
To recall a marked scene
1. Press SEARCH and the search menu appears
on the screen.
2. Press a number button to select a marker
number that you want to recall. Playback
starts from the marked scene.
4
Operation
To delete a Marker
1. Press SEARCH and the search menu appears
on the screen.
2. Press u to highlight a marker number.
Use I/i to select a marked scene that you
want to delete.
3. Press CLEAR and the marked scene is erased
from the search menu.
NOTE
• This function may not work depending on discs,
titles.
• All marked points are cleared if the title is in
complete stop (x) mode, the title is changed or
if you unload the disc.
NOTE
The equalizer will disappear when you change the
music contents list view.
56
Operation
Last Scene Memory
BD
DVD
This unit memorizes the last scene from the
last disc that is viewed. The last scene remains
in memory even if you remove the disc from
the unit or switch off the unit. If you load a disc
that has the scene memorized, the scene is
automatically recalled.
NOTE
• Last Scene Memory function for a previous disc
is erased once a different disc is played.
• This function may not work depending on the
disc.
On-Screen display
You can display and adjust various information
and settings concerning the content.
Displaying content information
on-screen
1. During playback, press INFO/DISPLAY
to show various playback information.
a
b
c
4
Screen Saver
d
Operation
The screen saver appears when you leave the
player in Stop mode for about five minutes.
The screen saver also appears when you are
playing music for about five minutes, but the
unit may not be turned off.
e
f
a Title – Current title number/total
number of titles.
b Chapter – Current chapter number/
total number of chapters.
c Time – Elapsed playing time/Total
playback time.
d Audio – Selected audio language or
channel.
e Subtitle – Selected subtitle.
f Angle – Selected angle/total number
of angles.
2. Select an option using U/u.
3. Use I/i to adjust the selected option
value.
4. Press RETURN(O) to exit the On-Screen
display
Operation
NOTE
Hearing different audio
BD
DVD AVCHD MOVIE MOVIE-N
• If no button is pressed for a few seconds, the onscreen display disappears.
1. During playback, press INFO/DISPLAY to
display the playback menu.
• A title number cannot be selected on some
discs.
2. Use U/u to select the [Audio] option.
• Available items may differ depending on discs
or titles.
3. Use I/i to select desired audio language,
audio track or audio channel.
• If BD interactive title is playing back, some
setting information is displayed on the screen
but prohibited to be changed.
Playing from selected time
BD
DVD AVCHD MOVIE MOVIE-N
1. Press INFO/DISPLAY during playback. The
time search box shows the elapsed playing
time.
For example, to find a scene at 2 hours, 10
minutes, and 20 seconds, enter “21020”.
3. Press ENTER ( ) to start playback from
selected time.
NOTE
NOTE
• Some discs allow you to change audio selections
only via the disc menu. If this is the case, press
TITLE/POPUP or DISC MENU button and choose
the appropriate audio from the selections on
the disc menu.
• Immediately after you have switched sound,
there may be a temporary discrepancy between
the display and actual sound.
• On BD-ROM disc, the multi audio format (5.1CH
or 7.1CH) is displayed with [MultiCH] in the onscreen display.
Selecting a subtitle language
BD
DVD AVCHD MOVIE MOVIE-N
1. During playback, press INFO/DISPLAY to
display the playback menu.
2. Use U/u to select the [Subtitle] option.
• This function may not work on some disc or
titles.
3. Use I/i to select the desired subtitle
language.
• This function may not work on some [My Media]
content depending on the file type and ability
of the DLNA server.
4. Press RETURN(O) to exit the On-Screen
display.
NOTE
Some discs allow you to change subtitle selections
only via the disc menu. If this is the case, press
TITLE/POPUP or DISC MENU button and choose
the appropriate subtitle from the selections on the
disc menu.
4
Operation
2. Select the [Time] option and then input
the required start time in hours, minutes,
and seconds from left to right.
57
58
Operation
Watching from a different
angle
BD
DVD
If the disc contains scenes recorded at different
camera angles, you can change to a different
camera angle during playback.
1. During playback, press INFO/DISPLAY to
display the playback menu.
2. Use U/u to select the [Angle] option.
3. Use I/i to select the desired angle.
4. Press RETURN(O) to exit the On-Screen
display.
4
Enjoying BD-LIVE
This unit allows you to enjoy functions such as
picture-in-picture, secondary audio and Virtual
packages, etc., with BD-Video supporting
BONUSVIEW (BD-ROM version 2 Profile 1
version 1.1/ Final Standard Profile). Secondary
video and audio can be played from a disc
compatible with the picture-in-picture
function. For the playback method, refer to the
instructions in the disc.
In addition to the BONUSVIEW function, BDVideo supporting BD-Live (BD-ROM version
2 Profile 2) that has a network extension
function allows you to enjoy more functions
such as downloading new movie trailers by
connecting this unit to the internet.
Operation
1. Check the network connection and settings
(pages 20-25).
2. Insert a USB storage device to the USB port
on the front panel.
A USB storage device is needed to
download bonus content.
USB device connection
Operation
3. Press HOME, and set the [BD-LIVE
connection] option on the [Setup] menu
(page 37).
Depending on the disc, the BD-Live
function may not operate if [BD-LIVE
connection] option is set to [Partially
Permitted].
4. Insert a BD-ROM with BD-LIVE.
The operations are different depending on
the disc. Refer to the manual supplied with
the disc.
59
Playing movie files
and VR discs
You can play DVD-RW discs that are recorded
in Video Recording (VR) format and movie files
contained on a disc/HDD/USB device.
1. Press HOME.
CAUTION
NOTE
4
2. Select [Movie] using I/i, and press ENTER
( ).
3. Select the [Data] option using I/i, and
press ENTER ( ).
• Some BD-LIVE contents may be restrictively
accessed in some territories by contents
provider’s own decision.
• It may take up to several minutes to load and
start enjoying BD-LIVE contents.
• Special video data, etc. may be played back
while they are being downloaded to a USB
Flash Drive using one function of BD-LIVE. The
playback may be paused depending on the
communication environment. Some functions
may be disabled to prevent skipping to sections
that have not been downloaded, etc.
This step is needed only when a disc and/or
a USB device is connected simultaneously
on this unit.
4. Select a file using U/u/I/i, and press B or
ENTER ( ) to play the file.
Operation
Do not extract the connected USB device while
content is being downloaded or a Blu-ray disc is
still in the disc tray. Doing so may damage the
connected USB device and BD-LIVE features may
not operate properly with the damaged USB
device anymore. If the connected USB device
seems damaged from such an action, you can
format the connected USB device from the PC and
reuse it with this unit.
60
Operation
NOTE
Viewing a photo
• The file requirements are described on page 10.
• You can use various playback functions. Refer to
pages 50-58.
• Unfinalized DVD VR format discs may not be
played in this unit.
• Some DVD-VR disc are made with CPRM data by
DVD RECORDER. This unit cannot support these
kinds of discs.
What is CPRM?
CPRM is a copy protection system (with
scramble system) only allowing the recording of
‘copy once’ broadcast programs. CPRM stands
for Content Protection for Recordable Media.
4
Selecting a subtitle file
MOVIE MOVIE-N
Operation
If the names of the movie file and subtitle file
are the same then the, subtitle file is played
automatically when playing the movie file.
You can view photo files using this unit.
1. Press HOME.
2. Select [Photo] using I/i, and press ENTER
( ).
3. Select the [Data], [HDD] or [USB] option
using I/i, and press ENTER ( ).
This step is needed only when a disc and/or
a USB device is connected simultaneously
on this unit.
4. Select a file using U/u/I/i, and press
ENTER ( ) to view the photo.
If the name of the subtitle file is different
from the movie file name, you need to select
the subtitle file on the [Movie] menu before
playing the movie.
1. Use U/u/I/i to select the subtitle file you
wish to play in the [Movie] menu.
Disc/Network menu
2. Press ENTER ( ).
HDD/USB menu
Press ENTER ( ) again to deselect the
subtitle file. The selected subtitle file will be
displayed when you play the movie file.
Operation
To play a slideshow
61
Options for PHOTO menu
Press B to start the slideshow.
a
To stop a slideshow
Press x during slideshow.
To pause a slideshow
Press X during slideshow.
Press B to re-start the slideshow.
To skip to the next/previous photo
b
c
d
e
f
g
h
Options for My Media menu
a
While viewing a photo in full screen, press
I/i to go to the previous or next photo.
NOTE
• The file requirements are described on page 10.
Options while viewing a photo
You can use various options during viewing a
photo in full screen.
1. While viewing a photo in full screen, press
INFO/DISPLAY to display the option menu.
2. Select an option using U/u/I/i.
Options or HDD/USB menu
Prev
Press . to move to the previous
file.
Next Press > to move to the next file.
90°
Press U/u to rotate the picture
clockwise or counter clockwise.
Stop Press x to stop the slideshow.
Hide Press RETURN (O) to hide the
control icons. To show the icons
again, press INFO/DISPLAY.
b
e
f
g
h
a Current photo/Total number of photos
Use I/i to advance to the previous or
next file.
b Slide Show – Press ENTER ( ) to start or
pause the slide show.
c Music –Press ENTER ( ) to play or pause
the background music. This option is
available after the background music is
selected using [Music Select] option. This
option is not available on [My Media]
menu.
d Music Select – Selects the background
music.This option is not available on [My
Media] menu.
1) Press ENTER ( ) and the menu will
appear.
2) Use U/u/I/i to select a media or
folder where there are music file(s).
3) Press ENTER ( ) to confirm your
selection.
e Rotate – Press ENTER ( ) to rotate the
picture clockwise. This option is not
available during slide show operation.
4
Operation
• You can use various playback functions. Refer to
pages 50-58.
62
Operation
f Zoom – Use green or yellow buttons to
zoom in or out of the picture. You can
move through the zoomed picture using
U/u/I/i buttons. Press RETURN (O) to
exit the [Zoom] menu and return to the
normal picture size.
• The zoom function can be operated by
the ZOOM button on the remote control.
4
Operation
g Setting – Use U/u to select an option
between [Effect] or [Delay].
Use I/i to adjust and press ENTER ( ) to
set the selected option.
[Effects] – You can apply various effects
during a photo slide show.
OFF : Slide Show without any effect.
Random : Slide show effects are applied
randomly.
Slide : Reveals a photo in a sliding motion
from various directions.
Door : Photo will be appear like door
opening.
Lattice : Photo will be appear from tiled
pieces to full screen image
[Delay] – You can set the photo delaying
time between slides in a Slide Show.
Listening to music
This unit can play Audio CDs and music files
1. Press HOME.
2. Select [Music] using I/i, and press ENTER
( ).
3. Select the [Data], [HDD] or [USB] option
using I/i, and press ENTER ( ).
This step is needed only when a disc and/or
a USB device is connected simultaneously
on this unit.
4. Select a music file or audio track using
U/u/I/i, and press ENTER ( ) to play the
music.
h Hide – Press ENTER ( ) to exit the option
menu. To access the menu again, press
ENTER ( ).
NOTE
The options c and d are not available for the
photo files in the [My Media] menu.
Disc/Network menu
3. Press RETURN (O) to exit the option menu.
HDD/USB menu
Operation
NOTE
• The file requirements are described on page 10.
63
Playing content via
your home network
• You can use various playback functions. Refer to
pages 50-58.
• For the files that are contained on a disc or USB
device, you can enter the file number using
the numbered buttons (0-9) to go directly to a
specific file.
• You can advance to the previous or next file by
pressing . or > during viewing a photo
file in full screen.
• You can start the slide show without accessing
the option menu by pressing B during viewing
a photo file in full screen.
• Use U/u/I/i to select a folder then press ENTER
and you can view the files in the folder. If you
want to move to the upper or lower directory,
use U/u to move to the desired directory.
• Depending on the DLNA server, the file name
displayed on the screen may differ from the
original file name.
Accessing a DLNA media
server
1. Check the network connection and settings.
Refer to pages 20-25.
2. Press HOME.
3. Select [My Media] using U/u/I/i, and
press ENTER ( ).
4. Select a DLNA media server from the list
using U/u, and press ENTER ( ).
Listening to music during slide
show in [My Media]menu
You can view photos as a slide show while
listening to music content on [My Media]
menu.
1. Press HOME and select [My Media] in the
[Home Menu].
2. Select a server from the list and press ENTER
to display the shared folders from the server.
3. Select a music file from the menu and press
B to play the music.
4. Use U/u/I/i to select a photo file from the
menu and press ENTER ( ) to display in full
screen.
5. Select [SlideShow] option and press ENTER
( ) to start slide show.
NOTE
• Depending on the media server, this player may
need to get the permission from the server.
• If you want to re-scan for available media
servers, press the blue coloured button
4
Operation
• If there is a code that is impossible to express in
the file name, it may be displayed as illegible.
The play can browse and play content on
your PC and DLNA certified media servers
connected on your home network.
64
Operation
5. Select a file using U/u/I/i, and press
ENTER ( ) to play the file.
About Nero MediaHome 4
Essentials
Nero MediaHome 4 Essentials is a software for
sharing movie, music and photo files stored
on your computer to this player as a DLNAcompatiable digital media server.
NOTE
• The Nero MediaHome 4 Essentials CD-ROM is
designed for PCs and should not be inserted in
this player or in any product other than a PC.
NOTE
• The supplied Nero MediaHome 4 Essentials CDROM is a customized software edition only for
sharing files and folders to this player.
• The file requirements are described on page 10.
• The supplied Nero MediaHome 4 Essentials
software does not support the following
functions: Transcoding, Remote UI, TV control,
Internet services and Apple iTunes
• You can use various playback functions. Refer to
pages 50-58.
4
Operation
• Because the compatibility and available playback
functions on the [My Media] menu are tested
on the bundle DLNA server (Nero MediaHome
4 Essentials) environment, file requirements and
playback functions on the [My Media] menu
may differ depending on media servers.
• The file requirements on page 11 are not always
compatible. There may be some restrictions due
to the file’s features and media server’s ability.
• If there is an unplayable music file in the [My
Media] menu, the player will skip the file and
play the next file.
• Playing movie subtitle files is only possible on
DLNA media server created by supplied Nero
MediaHome 4 Essentials software on this player
package.
• This manual explains operations with the
English version of Nero MediaHome 4 Essentials
as examples. Follow the explanation referring to
the actual operations of your language version.
Installing Nero MediaHome 4
Essentials
Before you install Nero MediaHome 4
Essentials, check the system requirement
shown below.
•
Windows® XP (Service Pack 2 or higher),
Windows Vista® (no Service Pack required),
Windows® XP Media Centre Edition 2005
(Service Pack 2 or higher), Windows Server®
2003
•
Windows Vista® 64-bit edition (application
runs in 32-bit mode)
•
Hard drive space: 200 MB hard drive space
for a typical installation of Nero MediaHome
stand-alone
•
1.2 GHz Intel® Pentium® III or AMD
Sempron™ 2200+ processors
•
Memory: 256 MB RAM
• The subtitle file name and movie file name have
to be the same and located in the same folder.
• The playback and operating quality of the [My
Media] function may be affected by your home
network condition.
• The files from removable media such as USB
drive, DVD-drive etc. on your media server may
not be shared properly.
Operation
•
Graphics card with at least 32 MB video
memory, minimum resolution of 800 x 600
pixels, and 16-bit colour settings
•
Windows® Internet Explorer® 6.0 or higher
•
DirectX® 9.0c revision 30 (August 2006) or
higher
•
Network environment: 100 Mb Ethernet,
WLAN (IEEE 802.11b/g/n)
Start up your computer, and insert the Nero
MediaHome 4 Essentials CD-ROM into your
computer’s CD-ROM drive. An installation
wizard will walk you through the quick and
uncomplicated installation process. To install
Nero MediaHome 4 Essentials, proceed as
follows:
1. Close all Microsoft Windows programs and
exit any anti-virus software that may be
running.
3. Click [Nero MediaHome 4 Essentials]. The
installation is prepared and the installation
wizard appears.
4. Click the [Next] button to display the serial
number input screen. Click [Next] to go to
the next step.
5. If you accept all conditions, click [I accept
the License Conditions] check box and click
[Next]. Installation is not possible without
this agreement.
6. Click [Typical] and click [Next]. The
installation process is started.
7. If you want to take part in the anonymous
collection of data, select the check box and
click the [Next] button.
8. Click the [Exit] button to complete the
installation.
Sharing files and folders
On your computer, you must share the folder
that contains the movie, music and/or photo
content to play them using [My Media]
features.
This part explains the procedure for selecting
the shared folders on your computer.
1. Double-click the “Nero MediaHome 4
Essentials” icon on the desktop.
2. Click [Network] icon on the left and define
your network name in the [Network name]
field. The Network name you enter will be
recognized by your player.
3. Click [Shares] icon on the left.
4. Click [Local Folders] tab on the [Shares]
screen.
5. Click [Add] icon to open the [Browse Folder]
window.
6. Select the folder containing the files you
want to share. The selected folder is added
to the list of shared folders.
7. Click [Start Server] icon to start the server
NOTE
• If the shared folders or files are not displayed on
the player, click the folder on the [Local Folders]
tab and click [Rescan Folder] at the [More]
button.
• Visit www.nero.com for more information and
software tools
4
Operation
2. Insert the Nero MediaHome 4 Essentials
CD-ROM into your computer’s CD-ROM
drive.
65
66
Operation
Accessing a share folder from
your PC
NOTE
1. Start your PC that is connected on your
local area network.
• The file requirements are described on page 10.
• You can use various playback functions. Refer to
pages 50-58.
2. On your PC, share folders which contain
movie, photo or audio files.
• The thumbnail of the unplayable files can be
displayed in the [My Media] menu, but those
cannot be played on this player.
3. On the player, check the network
connection and settings.
4. press HOME.
• If there is an unplayable music file in the [My
Media] menu, the player will skip the file and
play the next file.
5. Select [My Media] using U/u/I/i, and
press ENTER ( ).
• The subtitle file name and movie file name have
to be the same and located at the same folder.
6. Select a share folder from the list using U/u,
and press ENTER ( ).
• The playback and operating quality of the [My
Media] function may be affected by your home
network condition.
• The files on a removable media such as USB
drive, DVD-drive etc. on your PC may not be
shared properly.
4
Operation
• You may experience connection problems
depending on your PC’s environment.
PC requirements
NOTE
Depending on the share folder, this player may
need to input network user ID and password for
accessing the folder.
7. Select a file using U/u/I/i, and press
ENTER ( ) to play the file.
•
Windows® XP (Service Pack 2 or higher),
Windows Vista® (no Service Pack required)
•
1.2 GHz Intel® Pentium® III or AMD
Sempron™ 2200+ processors
•
Network environment: 100 Mb Ethernet,
WLAN (IEEE 802.11b/g/n).
NOTE
If you use Windows® XP or Windows Vista®, visit link
below for more information on file share settings.
Operation
Entering a network user ID and the
password
Depending on your PC’s environment, you
may need to enter a network user ID and the
password for accessing a shared folder.
1. The keyboard menu appears automatically
if the network user ID and the password are
required.
2. Use U/u/I/i to select a character then
press ENTER ( ) to confirm your selection
on the keyboard menu.
67
3. When you finish entering the network user
ID and password, select [OK] using U/u/I/
i and press ENTER ( ) to access the folder.
The network user ID and password will be
remembered after accessing the folder
for your convenience. If you do not want
the network user ID and password to be
remembered, press A colored (Red) button
to un-tick the [Remember] check box
before accessing the folder.
To enter a letter with an accent mark, select
the letter from the extended character set.
Example: Select “D” and then press INFO/
DISPLAY to display the extended character
set. Use I/i to select “D” or “Ď” and then
press ENTER ( ).
4
Operation
[OK]
Click on this button when all characters
have been successfully entered.
[Clear]
Clear all entered characters.
[Space]
Inserts a space at the cursor position.
[Backspace]
Deletes the previous character at the cursor
position.
[ABC / abc / #+-=&]
Change the keyboard menu settings to
capital letter, small letters or symbols.
68
Operation
Using [Copy] features
NOTE
• If you try to copy or move a corrupt file, the
copy or move procedure will be stopped.
You can move or copy files to other storage
media or folders. You can delete files also.
• If you copy or move a files/folders to a FAT16/
FAT32 formatted storage, copy or move capacity
is limited to 4GB.
Copying or moving files/folders
1. Press HOME.
2. Use U/u/I/i to select [Copy], and press
ENTER ( ).
3. Use U/u to select a storage media you want
to copy or move file from, and press i.
Deleting files/folders
1. Press HOME.
2. Use I/i to select [Copy], and press ENTER
( ).
3. Use U/u to select a storage that contains
files to delete, and press i.
4. Use U/u to select [Trash Can], and press
ENTER ( ).
4
Operation
4. Use U/u to select a storage media you want
to copy or move to, and press ENTER ( ).
5. Use U/u to select file/folder you want to
copy or move, and press MARKER.
Repeat this step to mark additional files and
folders.
5. Use U/u to select file/folder you want to
delete, and press MARKER.
6. Press i to select the destination field.
Repeat this step to mark additional files and
folders.
7. Use U/u to select the directory you want to
copy or move to, and press REC.
6. Press i.
8. Use I/i to select [Copy] or [Move], and
press ENTER ( ).
7. Use I/i to select [OK], and press ENTER
( ).
Select [Cancel] to cancel copying or
moving.
Select [Cancel] to cancel deleting.
Operation
Playing YouTube™
videos
69
About the YouTube™ menu
There are various options on the YouTube
menu. Use U/u/I/i to select an option
and press ENTER ( ) to select the options as
described below.
You can browse, search and watch YouTube™
videos over the internet on your TV via your
unit.
Watch YouTube™ videos on your
TV
1. Press HOME.
Featured – The featured videos list will be
displayed.
2. Press U to select the option menu bar.
Recent Videos – The most recently updated
videos list will be displayed.
3. Use I/i to select an option and press
ENTER ( ) to search for videos.
4. Use I/i to select a video and press ENTER
( ) or B to play the video.
Button
Operation
B or ENTER Starts playback of the video
with content detail.
INFO/
DISPLAY
Toggle between playback in
full screen and playback screen
with content detail.
X
To pause a video while it is
playing. To resume playing a
paused video, press B again.
x
Stops the video and displays
related videos list.
./>
Skip the playback forward or
backward .
Most Viewed – The most viewed videos list
will be displayed. The period option appears
at the bottom of the screen.
Top Rated – The best rated videos list from
YouTube server will be displayed. The period
option appears at the bottom of the screen.
Search – The keyboard menu will be
displayed. See “Searching videos” on page 70
for more detail.
History – The videos list that you previously
played on this unit will be displayed.
Maximum of 25 videos can be stored.
Favorites – This option will appear only when
the unit is in sign-in status. Displays the videos
list that is arranged in the YouTube server with
your account. Some videos may not appear
on the [Favorites] list, even if the videos are
arranged in the server.
Sign in (Sign Out) – Displays the keyboard
menu to sign in or returns to the signout status. See “Sign in with your YouTube
account” on page 71 for more details.
4
Operation
2. Use U/u/I/i to select [YouTube™], and
press ENTER ( ).
70
Operation
Local site – Choose which country’s videos
you would like to view. The countries listed on
the [Local Site] menu may differ from those
listed on the YouTube web site.
NOTE
• The YouTube™ menu can display 5 videos in the
videos list. Press red or blue button to display
next/previous 5 videos.
Searching videos
You can search for videos by entering search
words of up to 128 characters.
1. Use I/i to select [Search] option from the
menu and press ENTER ( ) to display the
keyboard menu.
• If you select the [Most Viewed] or [Top Rated]
option in the YouTube menu, the period options
appear at the bottom of the screen. Use U/u/I/
i to select a period option and press ENTER
( ) to display the videos list within the selected
period.
• The videos list located using this player may be
different from the list when searching via a PC.
4
When you are entering a character, a
maximum of 5 suggestion words will be
displayed.
Operation
[OK] – Click on this button when all
characters have been successfully entered.
[Clear] – Clear all entered characters.
[Space] – Inserts a space at the cursor
position.
[Backspace] – Deletes the previous
character at the cursor position.
[ABC / abc / #+-=&] – Change the
keyboard menu settings to capital letters,
small letters or symbols.
NOTE
To enter a letter with an accent mark:
1. Select a letter using U/u/I/i on the keyboard
menu.
2. Press INFO/DISPLAY to display the extended
character set.
3. character set. Use I/i to select a character then
press ENTER.
2. When you finish entering the search words,
select [OK] and press ENTER ( ) to display
the related videos list.
Operation
NOTE
Available languages to enter on the keyboard
menu are as follows:
English, Spanish, Italian, French, German, Dutch,
Portuguese, Swedish, Polish and Czech.
71
This unit can automatically store up to 5 IDs
which were previously signed-in. The IDs list
appears when you select the [Sign In] option.
Sign in with your YouTube™
account
To watch videos from your [Favorites] video list
on the YouTube server with your account, you
need to sign in with your YouTube account.
1. Use I/i to select the [Sign In] option from
the menu and press ENTER ( ) to display
the keyboard menu.
Refer to the step 1 from “Searching Videos”
on page 70 for using the virtual keyboard.
3. When you finish entering the ID and the
password, select [OK] and press ENTER ( )
to sign in.
4. If you want to sign out, select the [Sign Out]
from the YouTube menu and press ENTER
( ).
Select the [X] symbol and press ENTER ( ) to
delete the stored ID.
4
Operation
2. Use U/u/I/i to select a character then
press ENTER ( ) to confirm your selection
on the keyboard menu.
Select a stored ID on the list and press ENTER
( ) to display the keyboard menu with the
selected ID is entered. You will then only need
to enter the password to sign in.
72
Maintenance
5
Maintenance
Notes on Discs
Handling the Unit
Handling Discs
When shipping the unit
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints
do not get on the surface. Never stick paper or
tape on the disc.
Please save the original shipping carton and
packing materials. If you need to ship the unit,
for maximum protection, re-pack the unit as it
was originally packed at the factory.
Storing Discs
Keeping the exterior surfaces clean
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of
heat and never leave it in a parked car exposed
to direct sunlight.
5
Cleaning Discs
Maintenance
Fingerprints and dust on the disc can cause
poor picture quality and sound distortion.
Before playing, clean the disc with a clean
cloth. Wipe the disc from the centre to out.
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available
cleaners, or anti-static spray intended for older
vinyl records.
•
Do not use volatile liquids such as
insecticide spray near the unit.
•
Wiping with strong pressure may damage
the surface.
•
Do not leave rubber or plastic products in
contact with the unit for a long period of
time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If
the surfaces are extremely dirty, use a soft
cloth lightly moistened with a mild detergent
solution. Do not use strong solvents such as
alcohol, benzine, or thinner, as these might
damage the surface of the unit.
Maintaining the Unit
The unit is a high-tech, precision device. If
the optical pick-up lens and disc drive parts
are dirty or worn, the picture quality could be
diminished. For details, please contact your
nearest authorized service centre.
Maintenance
About the hard disk drive HDD
The internal hard disk drive (HDD) is a fragile
piece of equipment. Please use the recorder
following the guidelines below to protect
against possible HDD failure.
Do not move the recorder while it is on.
•
Do not use the unit with a damaged HDD.
The product can be damaged.
•
Install and use the recorder on a stable,
level surface.
•
Do not use the recorder in excessively hot
or humid places, or in places that may be
subject to sudden changes in temperature.
Sudden changes in temperature can cause
condensation to form inside the recorder.
This can be a cause of HDD failure.
•
While the recorder is switched on, do not
unplug from the wall socket or switch the
electricity off from the breaker switch.
•
Do not move the recorder immediately
after switching it off. If you need to move
the recorder, please follow the steps below:
1. After the message “OFF” is shown in the
display, wait at least two minutes.
2. Unplug from the wall socket.
3. Move the recorder.
•
If there’s a power failure while the recorder
is on, there is a chance that some data on
the HDD will be lost.
•
The HDD is very delicate. If used improperly
or in an unsuitable environment, it is
possible that the HDD will fail after a few
years of use. Signs of problems include
playback unexpectedly freezing and
noticeable block noise (mosaic) in the
picture. However, sometimes there will be
no warning signs of HDD failure.
•
If the HDD fails, playback of recorded
material will not be possible. In this case it
will be necessary to replace the HDD.
The manufacturer disclaims responsibility
for loss of data contained in HDD.
•
The HDD capacity displayed on your TV
screen may not match exactly the capacity
printed on your HDD.
5
Maintenance
•
•
73
74
Troubleshooting
6
Troubleshooting
General
6
Troubleshooting
Symptoms
Cause & Solution
The Power does not turn
on.
•
Plug the power cord into the wall outlet securely.
The unit does not start
playback.
•
Insert a playable disc. (Check the disc type, color system, and
regional code.)
•
Place the disc with the playback side down.
•
Place the disc on the disc tray correctly inside the guide.
•
Clean the disc.
•
Cancel the Rating function or change the rating level.
The angle cannot be
changed.
•
Multi-angles are not recorded on the DVD Video being
played.
Cannot play movie, photo
or audio files.
•
The files are not recorded in a format that the unit can play.
•
The unit does not support the codec of the movie file.
The remote control does
not work properly.
•
The remote control is not pointed at the remote sensor of
the unit.
•
The remote control is too far from the unit.
•
There is an obstacle in the path between the remote control
and the unit.
•
The batteries in the remote control are exhausted.
Troubleshooting
75
Picture
Symptoms
Cause & Solution
There is no picture.
•
Select the appropriate video input mode on the TV so the
picture from the unit appears on the TV screen.
•
Connect the video connection securely.
•
Check the [HDMI Color Setting] in the [Setup] menu is
set to the appropriate item that conforms to your video
connection.
•
Your TV may not support the resolution you have set on the
unit. change the resolution to one that your TV accepts.
•
The player’s HDMI OUT jack is connected to a DVI device that
does not support copyright protection.
•
You are playing a disc recorded in a colour system that is
different from your TV.
•
Set the resolution to one that your TV accepts.
Picture noise appears
Sound
Symptoms
Cause & Solution
There is no sound or the
sound is distorted.
•
Connect the audio connection securely.
•
The input source setting on the amplifier or the connection
to the amplifier is incorrect.
6
•
The unit is in scan, slow motion, or pause mode.
•
The sound volume is low.
•
Check that the connected amplifier is compatible with the
audio format output from the player.
•
The player’s HDMI OUT jack is connected to a DVI device.
The DVI jack does not accept audio signal.
Troubleshooting
•
Check the device connected to the player’s HDMI OUT jack is
compatible with the audio format output from the unit.
76
Troubleshooting
Network
Symptoms
Cause & Solution
BD-LIVE feature does not
work.
•
The connected USB storage may not have enough space.
Connect the USB storage with at least 1GB free space.
•
Ensure that the unit is correctly connected to the local area
network and can access the internet (see pages 20-25).
•
Your broadband speed may not be fast enough to use the
BD-Live features. Contact your Internet Service Provider
(ISP) and increase the broadband speed to suit the unit’s
requirements.
•
The [BD-LIVE connection] option in the [Setup] menu is set
to [Prohibited]. Set the option to [Permitted].
Streaming video services
(such as YouTube™, etc.)
are often stop or “buffer”
during playback.
•
Your broadband service speed may not be fast enough to
stream video services. Contact your Internet Service Provider
(ISP) and increase the broadband speed is recommended.
Shared folder or files from
your PC or a media server
are not displayed on the
[My Media] menu.
•
The firewall or anti-virus software on your media server is
running. Turn off the firewall or anti-virus software running
on your PC or media server.
•
The unit is not connected to the local area network that your
PC or the media server are connected.
Cannot connect the player •
to the access point or
wireless LAN router.
The wireless communication may be interrupted from
household devices that are using radio frequencies. Move
the player away from them.
6
Troubleshooting
Customer Support
You can update the unit using the latest software to enhance the products operation and/or
add new features. To obtain the latest software for this unit (if updates have been made), please
visit http://lgservice.com or contact LG Electronics customer care centre.
Troubleshooting
77
Recording
Solution
Cannot record or does not
record successfully.
•
Check the remaining space on the HDD.
•
If your source is copy-protected, you cannot record it using
this recorder.
•
If you set a DTV rating for the recorder and higher rated
digital programs are received, the programme cannot be
recorded. Change the DTV rating level in order to record it.
•
Clock is not set to correct time.
•
The start time of the timer recording is past.
•
Two timer recordings may have overlapped, in which case
only the earlier one will record completely.
•
When setting the recording programme, make sure you set
the recorder’s built-in tuner, not the TV’s built-in tuner.
•
If the the HDD is damaged, the recording may not complete
successfully.
Stereo Audio Record and/
Playback is not present.
•
TV is not Stereo-compatible.
•
Broadcast programme is not in stereo format.
You cannot enter a timer
programme when.
•
A recording is already underway.
•
The time you’re trying to set has already passed.
•
There are already 32 timer programs set.
•
The earlier programme takes priority.
•
The recorder can record 2 channels simultaneously but do
not make overlapping timer recordings, if you do, the earlier
programme takes priority.
Timer record does not
record successfully.
If two or more timer
programs overlap.
6
Troubleshooting
Symptoms
OPEN/
CLOSE
78
Appendix
7
Appendix
CLEAR
GUIDE
REC.
Controlling a TV with
the Supplied Remote
Control
TIMER
REC.
DISC MENU
REC.LIST the buttons
You can control your TV using
EDIT
FAV
PAGE
below.
MARKER
SEARCH
ZOOM
TEXT
AUDIO
SUBTITLE
AV/INPUT
VOL
PR
VOL
PR
By pressing
You can
1 (TV POWER)
Turn the TV on or off.
AV/INPUT
Switch the TV’s input
source between the TV
and other input sources.
7
PR U/u
Appendix
Scan up or down
through memorized
channels.
VOL +/–
Adjust the volume of
the TV
NOTE
Depending on the unit being connected, you may
not be able to control your TV using some of the
buttons.
Setting up the remote to
control your TV
You can operate your TV with the supplied
remote control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down 1 (TV POWER) button,
press the manufacturer code for your TV
with the numerical buttons (see the table
below).
Manufacturer
Code Number
LG
1(Default), 2
Zenith
1, 3, 4
GoldStar
1, 2
Samsung
6, 7
Sony
8, 9
Hitachi
4
2. Release the 1 (TV POWER) button to
complete setting.
Depending on your TV, some or all buttons
may not function on the TV, even after
entering the correct manufacturer code. When
you replace the batteries in the remote, the
code number you have set may be reset to
the default setting. Set the appropriate code
number again.
Appendix
79
Area Code List
Choose an area code from this list.
Area
Afghanistan Code Area
AF Fiji Code Area
Code Area
Code
FJ Monaco MC Singapore SG
SK
Argentina AR Finland FI Mongolia MN Slovak Republic Australia AU France FR Morocco MA Slovenia Austria AT Germany DE Nepal NP South Africa ZA
Belgium BE Great Britain GB Netherlands NL South Korea KR
Bhutan BT Greece GR Netherlands
GL Antilles Bolivia BO Greenland Brazil BR Hong Kong Cambodia KH Hungary Canada CA India Chile CL Indonesia China CN Israel Colombia CO Italy Congo CG Jamaica Costa Rica CR Japan Croatia HR Kenya Czech Republic CZ Kuwait Denmark DK Libya Ecuador EC Luxembourg Egypt EG Malaysia El Salvador SV Maldives Ethiopia ET Mexico HK New Zealand HU Nigeria IN Norway ID Oman IL Pakistan IT Panama JM Paraguay JP Philippines KE Poland KW Portugal LY Romania LU Russian
Federation MY
Saudi Arabia MV
Senegal MX
Spain SI
ES
AN Sri Lanka NZ Sweden LK
NG Switzerland NO Taiwan CH
SE
TW
OM Thailand PK Turkey TH
PA Uganda PY Ukraine UG
PH United States PL Uruguay TR
UA
US
UY
PT Uzbekistan RO Vietnam UZ
Zimbabwe ZW
RU
VN
SA
SN
7
Appendix
80
Appendix
Language code List
Use this list to input your desired language for the following initial settings: [Disc Audio],
[Disc Subtitle] and [Disc Menu].
Language
7
Code Language
Code Language
Code Language
Code
Afar 6565
French 7082
Lithuanian 7684
Sindhi 8368
Afrikaans 6570
Frisian 7089
Macedonian 7775
Singhalese 8373
Albanian 8381
Galician 7176
Malagasy 7771
Slovak 8375
Ameharic 6577
Georgian 7565
Malay 7783
Slovenian 8376
Arabic 6582
German 6869
Malayalam 7776
Spanish 6983
Armenian 7289
Greek 6976
Maori 7773
Sudanese 8385
Assamese 6583
Greenlandic 7576
Marathi 7782
Swahili 8387
Aymara 6588
Guarani 7178
Moldavian 7779
Swedish 8386
Azerbaijani 6590
Gujarati 7185
Mongolian 7778
Tagalog 8476
Bashkir 6665
Hausa 7265
Nauru
7865
Tajik 8471
Basque 6985
Appendix
Hebrew 7387
Nepali 7869
Tamil 8465
Bengali; Bangla 6678
Hindi 7273
Norwegian 7879
Telugu 8469
Bhutani 6890
Hungarian 7285
Oriya 7982
Thai 8472
Bihari 6672
Icelandic 7383
Panjabi 8065
Tonga 8479
Breton 6682
Indonesian 7378
Pashto, Pushto 8083
Turkish 8482
Bulgarian 6671
Interlingua 7365
Persian 7065
Turkmen 8475
Burmese 7789
Irish 7165
Polish 8076
Twi 8487
Byelorussian 6669
Italian 7384
Portuguese 8084
Ukrainian 8575
Chinese 9072
Japanese 7465
Quechua 8185
Urdu 8582
Croatian 7282
Kannada 7578
8590
6783
Kashmiri 7583 Rhaeto-Romance 8277
Uzbek Czech Vietnamese 8673
Danish 6865
Kazakh 7575
Rumanian 8279
Volapük 8679
8285
Dutch 7876
Kirghiz 7589
Russian Welsh 6789
English 6978
Korean 7579
Samoan 8377
Wolof 8779
8365
Esperanto 6979
Kurdish 7585
Sanskrit Xhosa 8872
Estonian 6984
Laothian 7679
Scots Gaelic 7168
Yiddish 7473
Faroese 7079
Latin 7665
Serbian 8382
Yoruba 8979
Zulu 9085
Fiji 7074
Latvian, Lettish 7686
Serbo-Croatian 8372
Finnish 7073
Lingala Shona 7678
8378
Appendix
Trademarks and
Licenses
81
DLNA and DLNA CERTIFIED are trademarks and/or
service marks of Digital Living Network Alliance.
“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.
“Blu-ray Disc” is a trademark.
“BD-LIVE” logo is a trademark of Blu-ray Disc
Association.
This product is licensed under the AVC patent
portfolio licence and VC-1 patent portfolio licence
for the personal and non-commercial use of a
consumer to (i) encode video in compliance with
the AVC Standard and VC-1 Standard (“AVC/VC-1
Video”) and/or (ii) decode AVC/VC-1 Video that was
encoded by a consumer engaged in a personal and
non-commercial activity and/or was obtained from a
video provider licensed to provide AVC/VC-1 Video. No
licence is granted or shall be implied for any other use.
Additional information may be obtained from MPEG
LA, LLC. See http://www.mpegla.com.
“BONUSVIEW” is trademark of Blu-ray Disc Association.
DivX is a registered trademark of DivX, Inc., and is used
under licence.
Java and all Java-based trademarks and logos
are trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and other
countries.
YouTube is a trademark of Google Inc.
Manufactured under licence from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
“DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation.
The Wi-Fi CERTIFIED Logo us a certification mark of the
Wi-Fi Alliance.
“x.v.Color” is a trademark of Sony Corporation.
7
Appendix
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC.
Manufactured under licence under U.S. Patent #’s:
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616;
6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 &
other U.S. and worldwide patents issued & pending.
DTS is a registered trademark and the DTS logos,
Symbol, DTS-HD and DTS-HD Master Audio are
trademarks of DTS, Inc. © 1996-2008 DTS, Inc. All Rights
Reserved.
82
Appendix
Network Software
Update
Network update notification
From time to time, performance improvements
and/or additional features or services may be
made available to units that are connected to
a broadband home network. If there is new
software available and the unit is connected
to a broadband home network, the player will
inform you about the update as follows.
Option 1:
1. The update menu will appear on the screen
when you turn on the player.
2. Use I/i to select a desired option and
then press ENTER ( ).
Option 2:
If the software update is available from the
update server, the “Software Update” icon
appears at the bottom of the Home menu.
Press blue colored (D) button to start the
update procedure. (see page 82-83 for more
detail)
Software Update
You can update the player using the latest
software to enhance the products operation
and/or add new features. You can update the
software by connecting the unit directly to the
software update server.
CAUTION
• Before updating the software in your player,
remove any disc and USB Device from the player.
• Before updating the software in your player, turn
the player off and then turn it back on.
• During the software update procedure, do
not turn off the player or disconnect AC
power, or do not press any button.
• If you cancel the update, turn off the power and
turn it on for stable performance.
• This unit cannot be updated to previous
software version.
[OK]
Starts the software update.
7
Appendix
[Cancel]
Exits the update menu and displays it next
booting.
1. Check the network connection and settings
(page 20-25).
2. Select [Software Update] option in the
[Setup] menu then ENTER ( ).
[Hide]
Exits the update menu and it does not
appear until next software is uploaded in
the update server.
The unit will check for the newest update.
Appendix
CAUTION
Pressing ENTER while checking for the update will
end the process.
NOTE
If there is no update available, the Message, “No
update is found.” appears. Press ENTER to return to
the [Home Menu].
3. If newer version exists, the message “A
new update was found. Do you want to
download it?” appears.
83
CAUTION
Do not turn off the power during the software
update.
NOTE
If the software includes the driver update, disc tray
may open during the process.
8. When update is completed, the message,
“Update is complete.” will appear, and the
power will turn off automatically after 5
seconds.
9. Turn the power back on. The system now
operates with the new version.
10.After completing the update process,
repeat procedures 1-4 in Step 4 and check if
there are no more updates available.
NOTE
4. Select OK to download the update.
(Selecting [Cancel] will end the update.)
5. The player starts downloading the newest
update from the server. (Downloading
will take about 80 seconds at the network
speed of 4Mbps Speed.)
6. When downloading is completed, the
message, “Download is complete. Do you
want to update?” appears.
7
Appendix
7. Select OK to start updating.
(Selecting [Cancel] will end the update and
downloaded file will not be re-usable. To
update software the next time, the software
update procedure has to be started from
the beginning again.)
The Software Update function may not work
properly depending on your internet environment.
In this case, you can obtain the latest software from
the authorized LG Electronics Service Centre then
update your player. Refer to “Customer Support” on
page 76.
84
Appendix
Audio Output Specifications
Jack/Setting
Source
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
DTS-HD
Linear PCM 2ch
Linear PCM 5.1ch
Linear PCM 7.1ch
Analogue
Output Stereo
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
Digital Output (DIGITAL AUDIO OUT) *5
PCM Stereo/ PCM
Multi-Ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
Jack/Setting
Source
7
Re-encode*3 *6
DTS
DTS
DTS
DTS
DTS
DTS
DTS
DTS
Primary Pass-Thru *1
Dolby Digital
Dolby Digital
Dolby Digital
DTS
DTS
PCM 2ch
PCM 2ch
PCM 2ch
Digital Output (HDMI OUT)
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
DTS-HD
Linear PCM 2ch
Linear PCM 5.1ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM Multi-Ch *3
PCM 5.1ch
PCM 7.1ch
PCM 7.1ch
PCM 5.1ch
PCM 7.1ch
PCM 2ch
PCM 5.1ch
Linear PCM 7.1ch
PCM 2ch
PCM 7.1ch
PCM Stereo
*1The secondary and interactive audio may
not be included in the output bitstream if
[Digital Output] option is set to [Primary
Pass-Thru]. (Except LPCM Codec : the output
always include interactive and secondary
audio.)
Appendix
*2 This player automatically selects the HDMI
audio according to the decoding capability
of the connected HDMI device even though
[Digital Output] option is set to [Primary
Pass-Thru].
*3 The [PCM Multi-Ch]/[Primary Pass-Thru]
setting of the [Digital Output] option and
[Re-encode] setting of the [Digital Output]
option cannot be set together.
Re-encode*6
DTS
DTS
DTS
DTS
DTS
DTS
DTS
DTS
Primary Pass-Thru *1 *2
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
DTS-HD
Linear PCM 2ch
Linear PCM 5.1ch
Linear PCM 7.1ch *4
If you set them together, the [Digital
Output] option is set to [PCM Stereo]
automatically.
*4 The LPCM audio recorded at 192kHz
sampling frequency will be outputted as
stereo sound.
*5 On the PCM audio output, the sampling
frequency of Digital Output is limited to 96
kHz.
Appendix
85
*6 If the [Digital Output] option is set to [Reencode], the audio output is limited to 48
kHz and 5.1Ch. If the [Digital Output] option
is set to [Re-encode], the DTS Re-encode
audio is outputted for BD-ROM discs, and
the original audio is outputted for the other
discs (like [Primary Pass-Thru]).
•
If [Digital Output] option is set to [PCM
Multi-CH] and [Primary Pass-Thru] while
playback Dolby Digital Plus or TrueHD
audio, audio output is limited to “PCM 2ch”.
•
If the HDMI connection is version 1.3
and Dolby Digital Plus/Dolby TrueHD is
outputted from HDMI OUT jack, DIGITAL
AUDIO OUT jack is limited to “PCM 2ch”
(When the Digital Output are connected
simultaneously).
•
The audio is outputted as PCM 48 kHz/16
bit for MP3/WMA file and PCM 44.1kHz/16
bit for Audio CD while playback.
•
The Dolby TrueHD audio recorded on some
Blu-ray discs consists of Dolby Digital and
TrueHD audio. Dolby Digital audio is output
through DIGITAL AUDIO OUT jacks and
“DD” displays on the screen if TrueHD audio
is not output (for example, when [Digital
Output] is set to [PCM Stereo] and [Primary
Pass-Thru])
7
Appendix
86
Appendix
Video Output Resolution
When the non-copy protected media is playing back
Video Out
Resolution
HDMI OUT
COMPONENT VIDEO OUT
HDMI connected
HDMI disconnected
576i
576i
576i
576p
576p
576p
720p
720p
720p
1080i
1080i
1080i
1080p/24Hz
1080p / 24Hz
576i
1080i
1080p / 50Hz
1080p / 50Hz
576i
1080i
When the copy protected media is playing back
Video Out
Resolution
HDMI OUT
576i
•
576i
576p
576p
720p
576i
576p
1080i
1080i
576i
576p
1080p/24Hz
1080p / 24Hz
576i
576p
1080p / 50Hz
1080p / 50Hz
576i
576p
This unit supports simultaneous output of
all video out jacks.
•
For the 576i resolution setting, real output
resolution of HDMI OUT will change to
576p.
•
If you select a resolution manually and then
connect the HDMI jack to TV and your TV
does not accept it, the resolution setting is
set to [Auto].
Appendix
•
HDMI disconnected
576i
720p
HDMI OUT connection
7
COMPONENT VIDEO OUT
HDMI connected
If you select a resolution that your TV
does not accept, the warning message
will appear. After resolution change,
if you cannot see the screen, please
wait 20 seconds and the resolution will
automatically revert back to the previous
resolution.
576p
•
The 1080p video output frame rate may
be automatically set to either 24Hz or
50Hz depending both on the capability
and preference of the connected TV and
based on the native video frame rate of the
content on the BD-ROM disc.
COMPONENT VIDEO OUT
Connection
BD, DVD could prevent up-scaling on analogue
output.
VIDEO OUT connection
The resolution of the VIDEO OUT jack is always
outputted at 576i resolution.
Appendix
Specifications
ANALOGUE AUDIO OUT:
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x
1
General
DIGITAL OUT (COAXIAL):
0.5 V (p-p), 75 Ω, RCA jack x 1
Power requirements:
AC 200-240 V, 50/60 Hz
Power consumption:
ANTENNA IN:
USB Port:
40W
Operating temperature:
Operating humidity:
4.4 kg
Antenna input, 75 ohms
4 pin (USB 2.0 standard)
Dimensions (W x H x D):
Approx. 430 x 49 x 295 mm) without foot
Net Weight (Approx.):
System
Laser:
5 °C to 35 °C)
Semiconductor laser,
wavelength:
5 % to 90 %
Television system:
DVB-T Standard Compliant
405nm / 650 nm
Signal system:
Standard PAL colour TV system
Frequency response:
TV Recording
20 Hz to 20 kHz
(48 kHz, 96 kHz, 192 kHz sampling)
Recording format:
TS (Transport Stream format)
Signal-to-noise ratio:
Recordable media:
Hard Disk Drive (HR599D: 500GB/
HR598D: 250GB), USB 2.0 HDD
Harmonic distortion:
Audio recording format:
87
More than 100 dB
(Analogue OUT connectors only)
Dynamic range:
Dolby Digital (2CH)
More than 95 dB
Wireless LAN (internal antenna):
Integrated IEEE 802.11n (Draft 2.0) wireless
networking access, compatible with
802.11b/g Wi-Fi networks.
VIDEO OUT:
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
COMPONENT VIDEO OUT:
(Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x
1, (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
Bus Power Supply (USB):
•
DC 5V
500mA
Design and specifications are subject to
change without notice.
7
Appendix
LAN port:
Ethernet jack x 1, 10BASE-T/100BASE-TX
Connectors
HDMI OUT (video/audio):
19 pin (HDMI standard, Type A)
Less than 0.008%
88
Appendix
Important Information
Relating to Network
Services
PLEASE READ CAREFULLY. USE OF THE NETWORK
SERVICES IS SUBJECT TO THE FOLLOWING TERMS
AND CONDITIONS.
Use of the Network Services requires an Internet
connection which is sold separately and for which
you are solely responsible. The Network Services may
be limited or restricted depending upon the quality,
capabilities and technical limitations of your Internet
service.
The Network Services belong to third parties and
may be protected by copyright, patent, trademark
and/or other intellectual property laws. The Network
Services are provided solely for your personal and
noncommercial use. Unless expressly authorized by
the respective content owner or service provider,
you shall not modify, copy, republish, upload, post,
transmit, translate, sell, create derivative works,
exploit, or distribute in any manner or medium any
content or services accessible through this product.
7
Appendix
LG IS NOT RESPONSIBLE FOR YOUR USE OF
THE NETWORK SERVICES. THE NETWORK
SERVICES ARE PROVIDED “AS IS.” TO THE FULLEST
EXTENT PERMISSIBLE BY LAW, LG MAKES NO
REPRESENTATIONS OR WARRANTIES OF ANY KIND
WHATSOEVER (i) FOR THE ACCURACY, VALIDITY,
TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY
NETWORK SERVICE MADE AVAILABLE THROUGH
THIS PRODUCT; OR (ii) THAT THE NETWORK SERVICES
ARE FREE OF VIRUSES OR OTHER COMPONENTS
THAT MAY INFECT, HARM, OR CAUSE DAMAGE TO
THIS PRODUCT, YOUR COMPUTER, TELEVISION,
OTHER EQUIPMENT, OR ANY OTHER PROPERTY. LG
EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO, WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
UNDER NO CIRCUMSTANCES AND UNDER NO
LEGAL THEORY, WHETHER IN CONTRACT, TORT,
STRICT LIABILITY OR OTHERWISE, SHALL LG BE
LIABLE TO YOU OR ANY THIRD PARTY FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, STATUTORY,
CONSEQUENTIAL OR OTHER DAMAGES OR
ATTORNEY FEES OR EXPENSES RELATING TO OR
ARISING OUT OF THE NETWORK SERVICES EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR
IF SUCH DAMAGES COULD HAVE BEEN REASONABLY
FORESEEN.
The Network Services may be terminated or
interrupted at any time, and LG makes no
representation or warranty that any Network Service
will remain available for any period of time. Use of the
Network Services may be subject to additional terms
and conditions of the respective third party service
provider. The Network Services are transmitted by
third parties by means of networks and transmission
facilities over which LG has no control. LG EXPRESSLY
DISCLAIMS ANY RESPONSIBILITY OR LIABILITY
FOR ANY INTERRUPTION OR SUSPENSION OF ANY
NETWORK SERVICE.
LG shall be neither responsible nor liable for
customer service related to the Network Services.
Any question or request should be made directly to
the respective Network Service providers.
“Network Service(s)” means the third party services
accessible through this product including but
not limited to all data, software, links, messages,
video and other content found thereon or used in
connection therewith.
“LG” means LG Electronics, Inc. its parent company
and all of their respective subsidiaries, affiliates and
related companies worldwide.
Appendix
Open source software
notice
89
• ntp : copyright © David L. Mills 1992-2006
• OpenSSL library :
– cryptographic software written by Eric Young
(eay@cryptsoft.com).
– software written by Tim Hudson (tjh@cryptsoft.
com).
The following GPL executables and LGPL libraries
used in this product are subject to the GPL2.0/
LGPL2.1 Licence Agreements:
GPL EXECUTABLES: Linux kernel 2.6, bash, busybox,
dhcpcd, mkdosfs, mtd-utils, net-tools, ntfsprogs,
gdbserver, procps, samba-3.0.25b, sysutils, tinylogin,
udftools, wireless-tools
LGPL LIBRARIES: uClibc, DirectFB, ebase, iconv,
cairo, gnutls, libcrypt, libgpg-err, libusb, mplib, neon,
qDecoder
gSOAP Public License 1.3 LIBRARY: gsoap
LG El ectronics offers to provide source code to
you on CD-ROM for a charge covering the cost of
performing such distribution, such as the cost of
media, shipping and handling upon e-mail request
to LG Electronics at: opensource@lge.com
This offer is valid for a period of three(3) years from
the date of the distribution of this product by LG
Electronics.
You can obtain a copy of the GPL, LGPL licenses from
http://www.gnu.org/licenses/old-licenses/gpl2.0.html and http://www.gnu.org/licenses/oldlicenses/lgpl-2.1.html .
Also you can obtain a copy of gSOAP public licence
from http://www.cs.fsu.edu/~engelen/license.
html.
All rights reserved.
Permission is hereby granted, free of charge, to
any person obtaining a copy of this software and
associated documentation files (the “Software”), to
deal in the Software without restriction, including
without limitation the rights to use, copy, modify,
merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to
whom the Software is furnished to do so, subject to
the following conditions:
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT. IN NO EVENT
SHALL THE AUTHORS OR COPYRIGHT HOLDERS
BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
7
Appendix
This product includes
• expat library : copyright © 2006 expat maintainers.
• freetype library: copyright © 2003 The FreeType
Project (www.freetype.org).
• giflib: Copyright © 1997 Eric S. Raymond
• jpeg: This software is based in part on the work of
the Independent JPEG Group copyright © 1991 –
1998, Thomas G. Lane.
• libcurl library : Copyright (c) 1996 - 2008, Daniel
Stenberg, daniel@haxx.se
• libnet : (c) 1998 - 2004 Mike D. Schiffman mike@
infonexus.com
• libpcap
• libpng library: copyright © 2004 Glenn RandersPehrson
• miniUPnP client: Copyright © 2005-2006, Thomas
BERNARD
– software developed by the OpenSSL Project for
use in the OpenSSL Toolkit. (http://www.openssl.
org)
• portmap : copyright © 1990 The Regents of the
University of California
• regex : Copyright © 1992, 1993, 1994, 1997 Henry
Spencer
• strace :
copyright © 1991, 1992 Paul Kranenburg
copyright © 1993 Branko Lankester
copyright © 1993 Ulrich Pegelow
copyright © 1995, 1996 Michael Elizabeth Chastain
copyright © 1993, 1994, 1995, 1996 Rick Sladkey
copyright © 1999,2000 Wichert Akkerman
• Tinyxml : copyright © 2000-2006 Lee Thomason
• UPnP SDK : Copyright (c) 2000-2003 Intel
Corporation
• WPA Supplicant : Copyright © 2003-2007, Jouni
Malinen <j@w1.fi> and contributors
• xml2 : copyright © 1998-2003 Daniel Veillard
• Zlib compression library: Copyright © 1995-2002
Jean-loup Gailly and Mark Adler.
As an Energy Star® Partner,
LG has determined that this
product or product models
meet the Energy Star®
guidelines for energy efficiency.
Energy Star® is a U.S. registered mark.
Download PDF