LG | LST-5100P | LG LST-5100P Owner’s Manual

Definition
High
Television Receiver
OWNER'S MANUAL
MODEL
:
LST-5100P
Before
connecting, operating
adjusting this product,
manual carefully and completely.
please
read this owner's
or
Precautions
Safety
CAUTION:
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
RISK OF ELECTRIC SHOCK
COVER
DO NOT OPEN
(OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED SERVICE PERSONNEL.
THE LIGHTNING FLASH WITH ARROWHEAD
SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED
TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC
SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE
PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE
(SERVICING)
INSTRUCTIONS IN THE LITERA-
TURE ACCOMPANYING THE APPLIANCE.
WARNING
TO PREVENT FIRE OR SHOCK
The
apparatus shall
shall be
placed
not be
the
on
HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
exposed
to
dripping
or
splashing
and that
no
objects
filled with
liquids,
such
as
vases,
apparatus.
WARNING: Do not install this
equipment
CAUTION: TO PREVENT ELECTRIC
in
a
confined space such
as a
book
case or
similar unit.
SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY
INSERT.
CAUTION
DO NOT ATTEMPT TO MODIFY THIS PRODUCT IN ANY WAY WITHOUT WRITTEN AUTHORIZATION FROM LG
ELECTRONICS CORPORATION. UNAUTHORIZED MODIFICATION COULD VOID THE USER'S AUTHORITY TO
OPERATE THIS PRODUCT.
THIS EQUIPMENT IS INTENDED TO RECEIVE AND DECODE SIGNALS TRANSMITTED ACCORDING TO DVB
AND IS INTENDED TO BE USED WITH AN APPROPRIATE ANTENNA AND DISPLAY DEVICE THAT YOU MUST
PROVIDE.
CAUTION:
The
?
?Y
?
appliance
is not intended for
oung Children should be
If the
set
appliance
on
electrical
moisture.
2
is
use
by
young children
supervised
to
ensure
that
or
they
infirm persons without
do not
play
with
supervision.
appliance.
supplied from a cord extension set or an electrical portable outlet device, the cord extension
portable outlet device must be positioned so that it is not subject to splashing or ingress of
IMPORTANT SAFETY INSTRUCTIONS
CAUTION:
PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS INSTALLATION
AND OPERATING GUIDE AND THOSE MARKED ON THE UNIT. RETAIN THIS GUIDE FOR
FUTURE REFERENCE.
This set has been
designed and manufactured to assure personal safety. Improper use can result in electric shock
or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for
installation, use, and servicing.
This unit does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET
COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read these instructions.
and operinstructions should be read before the product is
-
All these
safety
ating
operated.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles,
and the
point
where
they
exit from
the apparatus.
2.
these instructions.
Keep
use
-
The
safety, operating
and
instructions should be retained for future refer-
11.
Only
use
attachments/accessories
specified by
the manufacturer.
ence.
3. Heed all
warnings. All warnings on the product and
operating instructions should be adhered to.
in the
-
4. Follow all
instructions.
All
-
operating
and
use
instructions should be followed.
5. Do not use this
For examapparatus
ple: near a bath tub, wash bowl, kitchen sink, laundry
tub, in a wet basement; near a swimming pool; etc.
near
water.
--
12. Use
6. Clean
only
the wall
with
dry
Unplug this product from
cleaning. Do not use liquid
cloth.
outlet before
only the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with appa-
--
ratus. When
used, use caution when
moving the cart/ apparatus combination to avoid
cleaners.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
-
Slots and
provided for
ventilation, to ensure reliable operation of the product,
and to protect it from over- heating. The openings
should never be blocked by placing the product on a
bed, sofa, rug or other similar surface. This product
should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided
and
the
openings
in the cabinet
manufacturer's
are
instructions
have
been
adhered to.
8. Do not install
near
any heat
sources
ators, heat registers, stoves,
(including amplifiers)
such
as
radi-
injury
13.
from
a
cart is
tip-over.
this apparatus
when unused for long
Unplug
during lightning
periods of time.
storms or
14. Refer all
servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as powersupply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
other apparatus
that produce heat.
or
9. Do not defeat the
safety purpose of the polarized or
grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not
fit
into
your outlet, consult an electrician
replacement of the obsolete outlet.
for
3
INTRODUC
Table of Contents
INTRODUCTION
NORMAL OPERATION
SafetyPrecautions.........................2
InformationDisplays....................27-28
ProgrammeBannerDisplay................27
.28
ProgrammeInformationDisplay.
ProgrammeGuide.........................29
NormalOperation.........................30
30
ProgrammeSelection................
Programme Selection ................30
30
Volume
V olume Adjustment..................
Adjustment ..................30
30
Signal...........................
Signal ...........................30
TeletextOperation......................31-32
IMPORTANTSAFETYINSTRUCTIONS.
.
.
.
.
.
.
.
.3
.
TableofContents..........................4
Front Panel Controls and
5
Display Window
RemoteControlKeyFunctions...............6
Unpacking HDTV Receiver and
Accessories/Connection Overview.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
7
ConnectionPanelOverview..................8
.
.
.
.
.
.
.
.
.
.
.
INSTALLATION
Connections............................9-15
REFERENCE
AntennaConnections......................9
Programming
AnalogMonitorConnections...............10
HD Monitor Component (YPbPr) Connections
11
theTV...................................33
HDMonitorRGBConnections..............12
Troubleshooting..........................36
Specifications............................37
.
HDMonitorDVI-HDTVConnections.
.
.
.
.
.
.
.
.
.
.13
the Remote Control to
RemoteControlCodesforTVs.
.
.
.
Operate
.
.
.
.
.
.
.
.34-35
VCRConnections.......................14
.15
Amplifier(Receiver)Connections.
SettingtheDisplayFormat..................16
.
.
.
.
.
.
.
.
.
.
About the
MENU OPERATION
InitialSettings............................17
GeneralOperation.......................17
SetupMenuOptions.....................18-19
InitialSettings..........................17
AutoProgramme........................18
ProgrammeEdit.........................18
SignalStrength.........................19
AudioMenuOptions....................20-21
AudioOption...........................20
DigitalAudioOutput......................20
AudioVariable..........................21
SpecialMenuOptions...................22-23
AspectRatio...........................22
ClockSet..............................23
Caption...............................23
24-26
Lock (Parental Control) Menu Options
LockSystem...........................24
ChangePIN............................24
BlockProgramme.......................25
.
.
.
.
.
.
ParentalGuidance.......................26
4
symbols
for instructions
Indicates hazards
itself
or
other
likely to cause
material damage.
Indicates
special operating
Indicates
tips
and hints for
Manufactured under license from
and the double-D
symbol
harm to the unit
features of this unit.
making
Dolby
the task easier.
Laboratories.
trademarks of
Dolby,
Dolby
Laboratories. Confidential unpublished works. Copyright
1992-1997 Dolby Laboratories. All rights reserved.
are
Front Panel Controls and
Display
Window
ArrowButtons(3/4/1/2)
Allow you to navigate on-screen menus and to adjust the system settings and preferences. Use
the arrow keys to move to a menu option and then use the
(SELECT) button to access it.
If no menu is displayed,the LEFT/RIGHT arrows control the volume setting and the
UP/DOWN
arrows
select programmes.
POWER
Turns the HDTV Receiver
on or
INTRODUC
off.
Remote Control Sensor
Receives
signals
Display
from the remote control.
Window
DISPLAY FORMAT
Sets the
output resolution
to formats and chooses the correct
display
format for your TV.
MENU
Shows the main
the screen.You
menu on
normal
viewing by pressing
can
return to
the EXIT button.
SELECT
If the main
the
displayed, pressing the
(SELECT) button will activate
selected MENU option. If the
(SELECT) button is pressed while you
are in normal viewing, the Programme Banner will be displayed.
menu
is
EXIT
Clears all
normal
Resolution Indicator
Indicates
Connection Indicator
output resolution.
1080i
720p
displays and returns to
viewing from any menu.
on-screen
Indicates
576p
576i
DVI
RGB
output connection.
YPBPR
Standby Indicator
Lights when the HDTV
Receiver is turned off.
Character Indicators
Indicates programme
number, volume level,
etc.
5
Remote Control
Key
Functions
POWER
Turns the HDTV Receiver ON and
OFF.
TV Control Buttons
-
-
-
Numbers
Chooses programmes and enters
programming information.
PREV.
Turns to the
previous
programme.
AUDIO
Selects
programme's audio language
options if available.
CC
Selects
mode if available.
caption
ARC
Changes
the
picture aspect
ratio.
SIGNAL
Shows the
signal strength
of the
current programme.
MENU
Accesses
or
closes main
menu.
MUTE
Pressing
pages through
the
GREEN buttons
Programme
Guide
menu.
TEXT
Switches between teletext mode and
normal TV
viewing.
MIX
Selects the
screen
background for teletext
(Opaque, User Transparency,
Transparency).
CANCEL
Hides the teletext
screen
except
page number.
INDEX
Moves to Index
is not
screen.
present,
Temporarily turns TV
OFF, press again to restore.
moves
If Index page
to page 100.
sound
LIST
the programme list.
Displays
GUIDE
the
Displays
Programme
Guide.
INFO
Shows the current station and
programme information
on
the
screen.
EXIT
Removes all
returns to TV
on-screen
viewing
displays
from any
menu.
VOL +/volume.
PR +/memorized programmes.
these buttons pages
a
Pressing
through the
Teletext
menu.
(SELECT)
Completes the programme number
input and promptly tunes to selected
programme.
FAV.
to the favorite programme.
Changes
SIZE
Enlarges
the text size to double in
the teletext mode.
SUBPAGE
Searches the
sub-page using
the
sub-code.
FREEZE
Freezes the current
image during TV
viewing. Pressing the button again
returns the image to live video.
Holds the teletext display and stops
the automatic page change in the
teletext mode.
REVEAL
Displays
6
and
ARROWButtons(3/4/1/2)
Selects options in a menu.
Selects
or
source.
MUTE:
COLOR Buttons
application.
off.
PR +/--: Selects TV's programme.
VOL +/--: Adjusts TV's volume.
temporarily.
on/off temporarily.
That
It's for teletext
RED
-
on or
TV/AV: Selects the TV's
Changes
Pauses the audio
is, volumes
-
POWER: Turns the TV
concealed information.
Unpacking
HDTV Receiver and Accessories/Connection Overview
Make sure you have received all the accessories listed below with the
High
High
Definition Television Receiver.
INTRODUC
Definition Television Receiver
The HDTV Receiver is
sending
the
signals
capable
of
receiving signals
from over-the-air antenna
sources
and
to your TV.
Included with the Receiver
the
are
Audio Cable
following
accessories.
Video Cable
Component (YPbPr)
Cable
RF Cable
Remote Control
2 AAA Batteries
Audio/Video Jacks and Cables
The Audio/Video
jacks provide
excellent
picture
and sound
quality. They
are
used for
making most Audio/Video connections between components. The
Audio/Video jacks may be color coded (yellow for video, red for right audio,
and white for left audio). If your component has only one input for audio
(mono), connect it to the left (white L/mono) audio jack on the HDTV
Receiver.
Component Out Jacks and Cables
Component Cables are used to connect the HDTV Receiver to an industry
standard YPbPr compatible HD Monitor (green for Y, blue for Pb, and red
for Pr). Remember to connect the left and right audio cables. The YPbPr
Component jacks carry only the picture signals, not the sound.
ANT LOOP OUT
Jack, and RF Cable
ANT LOOP OUT
and the TV and
provides an RF connection between the
provides the signal of ANT IN jack to TV.
HDTV Receiver
Remote Control
In addition to the HDTV
Receiver, the
remote control
can
be
programmed
to
control many other devices.
Remote Control
Operation Range
Point the remote control at the remote
Distance: About 7
Angle:
m
sensor
and press the buttons.
from the front of the remote
sensor.
About 30° in each direction of the front of the remote
sensor.
AAA
Remote Control
AAA
Battery
Remove the
batteries
and
Installation
battery cover on the rear of the
(size AAA) with
aligned correctly. Reinstall cover.
remote
control, and insert
two
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (stan-
dard, alkaline, etc.).
7
Connection Panel Overview
ANT IN
Connect to HDTV
signal source;external/internal
antenna.
DVI OUT
Connect to
a
TV with DVI-DTV
connector.
AUTHORIZED SERVICE ONLY
Is used
only
for authorized service purposes.
COMPONENT VIDEO OUT
Connect to
a
TV with YPbPr
inputs.
Variable AUDIO OUT
Connect to
a
(Left/Right)
TV, Amplifier, Receiver
or
Stereo
System.
OPTICAL
(Digital audio out jack)
Connect to digital (optical)audio
equipment.
S-VIDEO OUT
Connect to
a
TV with S-Video
inputs.
VIDEO OUT
Connect to
a
TV with video
COAXIAL
Connect
(Digital audio out jack)
to digital (coaxial) audio equipment.
RGB OUT
Connect to
a
TV with RGB-DTV
inputs.
ANT LOOP OUT
RF
output
to TV 's "Antenna In
Do not touch the inner
Electrostatic
8
"
pins
discharge may
of the
cause
jack
the
or
other devices.
panel.
permanent damage to the
jacks
on
inputs.
rear
unit.
Connections
Antenna Connections
1
Connect the "Antenna" to the "ANT IN"
jack
on
the HDTV Receiver
using
a
coaxial RF cable.
ote
There
might
antenna to
2
be
an
some areas
where the
signal strength
could be too
attenuator. Screw the attenuator onto the "ANT IN"
Connect the "ANT LOOP OUT"
jack
on
high.
jack.
If so, you may need to connect the
the HDTV Receiver to the "Antenna In"
jack
on
your TV
using
a
coaxial
RF cable.
Antenna
Antenna
Wall Jack Panel
TV
or
Other Device Connection Panel
ANTENNA
S-VIDEO
INPUT
INPUT
COMPONENT VIDEO INPUT
Pr
Pb
Y
VIDEO
INPUT
L
AUDIO INPUT
L
R
HDTV Receiver Connection Panel
9
INSTAL O
Connections
Display
?
?
?
(Continued)
Formats Overview
The HDTV Receiver offers various
display formats and multiple video outputs.When the HDTV Tuner
to A/V systems, the HDTV Tuner can provide video signal formats 1080i, 720p, 576p, and 576i.
1080i, 720p, 576p, and 576i modes are available for component video (YPbPr)outputs.
1080i, 720p, and 576p modes are available for RGB and DVI outputs.
?
576i mode is available for
VIDEO, S-VIDEO, and COMPONENT VIDEO outputs.
?
The HDTV Tuner has two
digital
audio
signal
audio
outputs;Dolby Digital
to OPTICAL and COAXIAL audio
is connected
5.1 and PCM.The HDTV Tuner sends out
outputs when digital broadcasts
are
received
being
by
a
digital
the HDTV
Tuner.
Analog
Monitor Connections
Antenna
TV Connection Panel
Antenna
ANTENNA
Wall Jack Panel
INPUT
L
S-VIDEO
VIDEO
INPUT
AUDIO INPUT
INPUT
R
L
OR
OR
HDTV Receiver Connection Panel
Connect the "Antenna" to the "ANT IN"
1
jack
on
the HDTV Receiver
using
a
coaxial RF cable.
ote
There
might
antenna to
be
an
some areas
where the
could be too
attenuator. Screw the attenuator onto the "ANT IN"
Connect the "ANT LOOP OUT"
2
signal strength
jack
on
high. If so, you may need
jack. (Refer to page 9.)
the HDTV Receiver to the "Antenna In"
jack
on
to connect the
your TV
using
a
coaxial
RF cable.
Connect the "AUDIO OUT" and "VIDEO OUT"
3 using RCA-type
(The Output
cables. If your
Selection must be
jacks
the HDTV Receiver to the "A/V IN"
jacks on
TV is equipped with an S-Video jack, use the S-VIDEO OUT jack.
set to YPbPr, refer to Display Format Setup on page 16.)
on
your TV
ote
When
using Composite
VIDEO OUT
(yellow connector)
appear and operate if 576i format is selected.
10
or
S-video
outputs from HDTV Receiver, MENU will only
Connections
HD Monitor
(Continued)
Component (YPbPr) Connections
Antenna
HD
Ready
INSTAL O
TV Connection Panel
Antenna
ANTENNA
Wall Jack Panel
AUDIO INPUT
COMPONENT VIDEO INPUT
INPUT
Pr
b
Y
L
VIDEO
INPUT
R
OR
HDTV Receiver Connection Panel
1
Connect the "Antenna" to the "ANT IN"
jack
on
the HDTV Receiver
using
a
coaxial RF cable.
ote
There
might
antenna to
2
be
an
some areas
where the
signal strength
could be too
attenuator. Screw the attenuator onto the "ANT IN"
Connect the "ANT LOOP OUT"
jack
on
high. If so, you may need
jack. (Refer to page 9.)
the HDTV Receiver to the "Antenna In"
jack
on
to connect the
your TV
using
a
coaxial
RF cable.
Connect the "COMPONENT OUT"
3 using RCA-type
cables.
jacks on the HDTV Receiver to the "COMPONENT IN" jacks of your TV
(The Output Selection must be set to YPbPr, refer to Display Format Setup on page
16.)
Connect the L/R "AUDIO OUT"
4 RCA-type
jacks
on
the HDTV Receiver to the L/R "AUDIO IN"
jacks
on
your TV
using
cables.
ote
1080i, 720p, 576p, and 576i modes
are
available for
component video (YPbPr) outputs.
11
Connections
(Continued)
HD Monitor RGB Connections
Antenna
HD
Ready
TV Connection Panel
Antenna
Wall Jack Panel
ANTENNA
S-VIDEO
INPUT
INPUT
RGB INPUT
VIDEO
INPUT
AUDIO INPUT
R
L
OR
HDTV Receiver Connection Panel
Connect the "Antenna" to the "ANT IN"
11
jack
on
the HDTV Receiver
using
a
coaxial RF cable.
ote
There
might
antenna to
be
an
some areas
where the
signal strength
could be too
attenuator. Screw the attenuator onto the "ANT IN"
2
Connect the "ANT LOOP OUT"
3
Connect the "RGB OUT"
jack
on
high. If so, you may need
jack. (Refer to page 9.)
the HDTV Receiver to the "Antenna In"
jack
on
to connect the
your TV
using
a
coaxial
RF cable.
connector.
(The Output
jack
on
Selection must be set to
Connect the L/R "AUDIO OUT"
4 RCA-type
the HDTV Receiver to the "RGB IN for DTV"
jacks
on
RGB, refer
the HDTV Receiver to the L/R "AUDIO IN"
cables.
ote
1080i, 720p, and 576p modes
12
are
to
jack of your TV using VGA-type
Display Format Setup on page 16.)
available for RGB
outputs.
jacks
on
your TV
using
Connections
(Continued)
HD Monitor DVI-HDTV Connections
Antenna
HD
Ready
TV Connection Panel
Antenna
Wall Jack Panel
ANTENNA
S-VIDEO
INPUT
INPUT
DVI-HDTV INPUT
L
INSTAL O
VIDEO
INPUT
AUDIO INPUT
R
OR
HDTV Receiver Connection Panel
1
Connect the "Antenna" to the "ANT IN"
jack
on
the HDTV Receiver
using
a
coaxial RF cable.
ote
There
might
antenna to
be
an
where the
some areas
signal strength
could be too
attenuator. Screw the attenuator onto the "ANT IN"
high. If so, you may need
jack. (Refer to page 9.)
2
Connect the "ANT LOOP OUT"
3
Connect the "DVI OUT"
jack
connector.
Selection must be set to
jack
on
the HDTV Receiver to the "Antenna In"
jack
on
to connect the
your TV
using
a
coaxial
RF cable.
(The Output
the HDTV Receiver to the "DVI IN for DTV"
on
Connect the L/R "AUDIO OUT"
4 RCA-type
jacks
on
DVI, refer
to
jack of your TV using
Display Format Setup on page 16.)
the HDTV Receiver to the L/R "AUDIO IN"
jacks
on
DVI-D
your TV
type
using
cables.
ote
?
1080i, 720p, and 576p modes
?ADVI-HDTV
input
find out if the TV
?
is
or
Some HD Monitors
are
outputs.
compliant with EIA-861 specifications. Check your TV or monitor's
monitor's DVI input is compliant with these specifications.
designed for PC applications using DVI-D may not work with this connection.
one
that is
available for DVI
user
manual to
13
Connections
(Continued)
VCR Connections
VCR Connection Panel
VIDEO
INPUT
AUDIO INPUT
R
LL
HDTV Receiver Connection Panel
Connect the L/R "AUDIO OUT"
VCR
using RCA-type
cables.
(If
jacks
and "VIDEO OUT"
your VCR is
equipped
jack
with
on
an
the HDTV Receiver to the "A/V in"
S-Video
jack,
use
the "S-Video"
jacks
jack.)
on
your
Caution
Output Selection is set to YPbPr and
display onto the tape during recording if:
the programme is changed with PR (+/--)
the sound level is adjusted with VOL (+/--)
or by pressing the
(SELECT) button, etc.
If the
576i
display
format is selected, the VCR will record
ote
The
14
caption signal
is recorded when the
display
format
settings
are
set to 576i.
(Refer
to page
16.)
an onscreen
Connections
(Continued)
Amplifier (Receiver) Connections
Amplifier (Receiver)
L
R
INSTAL O
Connection Panel
COAXIAL
IO IN
OPTICAL
DIGITAL INPUT
OR
HDTV Receiver Connection Panel
Connecting
to an
amplifier equipped
Connect the Left and
Right
amplifier, receiver,
stereo
or
with two channel
AUDIO OUT
analog
jacks on the HDTV Receiver
system, using the supplied audio cables.
stereo or
Dolby Surround
to the audio left and
Connecting to an amplifier equipped with two channel digital stereo (PCM)
receiver equipped with a multi-channel decoder (Dolby DigitalTM)
Connect
one
input jack
on
Digital
A
digital
of the HDTV Receiver's DIGITAL AUDIO OUT
your
amplifier.
Use
an
or
jacks (OPTICAL or COAXIAL)
optional digital (optical or coaxial) audio cable.
in
jacks
on
your
to an Audio/ Video
to the
corresponding
Multi-channel sound
multi-channel connection
receiver that
right
supports
provides
one or more
the receiver manual and the
logos
the best sound
of the audio formats
on
quality. For this
supported by your
you need a multi-channel Audio/Video
HDTV Receiver (Dolby Digital). Check
the front of the receiver.
15
the
Setting
Display
Format
The HDTV Receiver
MAT button
on
olution may be
provides several display formats. The DISPLAY FORthe front panel changes the output resolution. The output resconverted from the original broadcast format.
Format
Display
Setup
Press DISPLAY FORMAT
once on
the front
panel.
display window.
1
output signal
appear
the type
Monitor that the
Depending
2 nected to, press DISPLAY
The current
will
in the
of
on
FORMAT
HDTV Receiver is
con-
/ 2
repeatedly on the front
panel to select desired output connector. (YPbPr, RGB, or DVI.)
Press MENU button if you wish to exit the display format setting.
3
DISPLAY FORMAT
Use SELECT
the front
panel
to confirm your
output
connector
selection.
The current
4
on
or 1
output resolution will appear in the display window.
the type of Monitor that the HDTV Receiver is connected to, press DISPLAY FORMAT or 1 / 2 repeatedly on the front
panel to select desired output resolution. (1080i, 720p, 576p, 576i)
Depending
on
Press MENU button if you wish to return to the
mode.
Press
(SELECT)
5 tion selection.
Display
Format
on
the front
panel
output
connector
to confirm your
setting
output resolu-
setup is finished.
otes
?
You
can
exit
Display
Format
Setup
mode
by pressing
EXIT
on
the front
panel.
?
The S-VIDEO and VIDEO OUT
jacks' signals
are
converted from all for-
mats to 576i format.
?
Display
Format modes
When
using Composite video or S-video outputs from HDTV Receiver,
screen display will only appear and operate if 576i format is selected.
Input Signal
format
1080i
all formats
1080i
720p
all formats
720p
576p
all formats
576p
576i
all formats
576i
OUTPUT CONNECTION
AVAILABLE FORMATS
COMPONENT VIDEO OUT
1080i/720p/576p/576i
RGB OUT
1080i/720p/576p
DVI OUT
1080i/720p/576p
VIDEO OUT
All formats converted to 576i
S-VIDEO OUT
All formats converted to 576i
16
Output Signal
format
on-
Initial
Settings
In this
system, there
menu
vided. Most
menus
several ways to customize the settings proconsist of three levels to set up the options, but some
require greater depth
ton, only the first and
are
for the
variety
of
settings.
second level of the
displayed by pressing
(SELECT). If a menu
has more than three levels, the pop-up dialogue box will be displayed as the
fourth or fifth level. For navigating the menu levels, you will see 2
on the
right side of the menu label to help you go to the next level.
screen.
The third level
menu
If you press the MENU butsystem will appear on the TV
be
can
"
To show and
remove
the Menu:
Press the MENU button
the remote control to
on
press of the MENU button
TV viewing.
To go to the next level:
Press
(SELECT)" (or
"
"
"
or a
2
")
display
the
A second
menu.
press of the EXIT button will take you back to
on
the remote control.
To go back to the previous level:
Press MENU (or 1 ") on the remote control.
"
General
1
2
3
4
5
6
Operation
Press MENU.
The main
Use
3
/
4
menu
will appear.
to select the desired menu
While the desired
menu
option
option.
is selected, press 2
or
(SELECT)
to move to the second level.
Use
3
/
Press 2
Some
4
to select the second menu
or
menu
(SELECT) to
options require
move
remote control to return to
to the third level.
additional
Press MENU to return to the
option.
steps.
previous menu
TV viewing.
or
press EXIT
on
the
ote
If your TV is in zoom mode, the menu screen may be cut off.
In this case, set the TV's zoom mode to normal to display the
menu
properly.
17
MENUOPRATI
Setup
Menu
Options
ote
PIN is needed to access the SETUP
to
menu
if
is set
[Lock System] option
[On].
Auto
Programme
finds all programmes (digital), and stores all the active programmes found on the programme list. Inactive or weak programmes may
not appear on the list.
Automatically
1
Press MENU to
the
display
on-screen menu.
2
Select the SETUP
3
Select the Auto
4
Select the "1.DTV"
5
When programme search is complete, the lowest programme
ber found appears on the TV screen.
move
/
4
then press
Programme using
3
/
using
menu
3
(SELECT)
or 2
to
to the second level.
4
then press
(SELECT)
the third level.
2 to move to
/
then press
(SELECT).
The programme search process begins. You can stop the process
pressing
(SELECT), MENU or EXIT.
Programme
or
using
3
4
by
num-
Edit
Programme Edit allows you to add or skip programmes from the programme list
in memory manually and create your own favorite list of favorite programmes.
1
Press MENU to
Select the SETUP
menu
2
Select
Programme
3 Programme
move
on-screen menu.
using
3
/
4
then press
(SELECT)
or 2
to
to the second level.
the
Edit
To
the
display
skip
Select
a
When
a
a
menu
Edit
using
3
/
4
then press
(SELECT)
or
2.
appears.
programme
programme on the programme editing menu then press blue
button to skip the programme. The skipped programme number will dim.
programme number is skipped it means that you will be unable
to select it using the PR (+/-) button during normal TV viewing. If you
want to select the
programme, directly enter the programme
number with the number buttons or select it in the Programme List
skipped
menu.
To block
Select
or
are
Select
jacks' signals
FAVOURITE LIST:
a
programme
on
the surf list.
output signals.
4
18
a
yellow
the programme editing menu then press FAV. to
add the programme to the FAVOURITE LIST.
Only the programmes on the programme editing menu can be added to
blocked. Press EXIT button to
restore the
a
To create
1080i, the VIDEO OUT
and S-VIDEO OUT
programme
programme on the programme editing menu then press
button to block the programme. (See page 25 for more details.)
Note: If you access this menu
when resolution is set to 576p,
720p,
a
Press MENU to return to the
remote control to return to
previous screen
TV viewing.
or
press EXIT
on
the
Setup
Menu
Options
ote
PIN is needed to access the SETUP
to
if
menu
[Lock System] option
is set
[On].
Signal Strength
Shows the
the correct
1
strength
position
bar for
incoming signal
to
help
adjust
the antenna to
from your location.
Press MENU to
display
Select the SETUP
menu
the
on-screen menu.
using
3
/
4
then press
2
Select
Signal Strength using
3 signal strength
displayed.
previous
4
viewing.
the
The
you
3
(SELECT)
or
2.
/ 4.
bar will be
Press MENU to return to the
screen or
press EXIT
on
the
remote control to return to TV
ip
You
can
also view
signal strength
bar
by pressing SIGNAL
on
the remote
control.
19
MENUOPRATI
Audio Menu
Options
Audio
Option
The Audio
gramme
1
Option allows
being received.
Press MENU to
you to select
the
display
2
Select the AUDIO
3
Select the Audio
4
Select the desired mode
on-screen menu.
using
menu
audio stream for the TV pro-
an
Option using
using
Dolby Digital: Dolby Digital
/
3
/
3
4
then press
(SELECT)
or
2.
4
then press
(SELECT)
or
2.
/ 4.
3
audio stream is received.
MPEG: MPEG audio stream is received.
5
Press MENU to return to the
remote control to return to
previous menu
TV viewing.
or
press EXIT
on
the
otes
If the selected audio stream is not
?
cally
received, original audio
selected.
You cannot
change the "Audio Option" setting
picture grade is SD (Standard Definition).
?
Digital
Audio
system you
programme's digital
digital
Audio
Output according
to the
the
display
on-screen menu.
2
Select the AUDIO
3
Select the
4
Select the desired audio output
menu
Digital Audio
(SELECT) or 2.
using
Out
3
/
4
then press
option using
using
3
3
/
4
(SELECT)
Receiver's
other
2.
then press
/ 4.
Select
PCM: Select when the HDTV Receiver's DIGITAL OUT
nected to
or
"Dolby Digital" if you connected the HDTV
DIGITAL OUT jack to a Dolby Digital decoder (or an amplifiequipment with a Dolby Digital decoder).
Dolby Digital:
5
type of audio
use.
Press MENU to
er or
when the current
Output
Sets the HDTV Receiver's
1
stream will be automati-
a
2-channel
digital
stereo
is
con-
amplifier.
Press MENU to return to the
remote control to return to
jack
previous menu
TV viewing.
or
press EXIT
on
the
otes
?
If you select the
HDTV Receiver
CAL and
?
?
20
"Dolby Digital"
and current audio stream is not
outputs the "PCM" signal from
"Dolby Digital", the
DIGITAL AUDIO OUT jacks (OPTI-
COAXIAL).
The "Digital Audio Out" is fixed to "PCM" when the "Audio Option" is set to "MPEG",
You cannot change the "Digital Audio Out" setting when the current programme's
digital picture grade is SD (Standard Definition).
Audio Menu
Options
Audio Variable
If the audio variable
decreased with
front
er.1
panel.
menu
is set to
by pressing
If set to
VOL
(+/--)
on
Off, audio volume
Press MENU to
display
the
2
3
Select Audio Variable
4
Select
5
Press MENU to return to the
menu
using
using
Audio Variable
can
be increased/
the remote control
can
not be controlled
or 1
by
/ 2
on
the
HDTV receiv-
on-screen menu.
Select the AUDIO
an
On, audio volume
3
/
3
/
4
4
then press
then press
option (On
or
(SELECT)
Off) using
previous menu
TV viewing.
remote control to return to
(SELECT)
or
3
or
2.
2.
or
/ 4.
press EXIT
on
the
otes
?
Before
setting
the Audio Variable to
TV's volume to
hearing
?
The
Off, make sure that you have turned down the
the minimum. Otherwise, sudden high volume sound may cause
speaker damage.
volume of digital audio out
or
on
HDTV Receiver
can
not be
adjusted
on
the
HDTV Receiver.
21
MENUOPRATI
Special
Menu
Options
Ratio
Aspect
Lets you choose the
screen
format
according
to the
screen
ratio.
Press MENU.
1
The main
menu
appears.
2
Use
3
/
4
to select the SPECIAL menu then press 2 or
to move to the second level.
3
Use
3
/
4
4
Press 2
Aspect
option.
to move to the third level.
(SELECT)
or
Ratio
3/4toselectanoption.
5Use
6
to select the
(SELECT)
Press MENU to return to the
remote control to return to
previous menu
TV viewing
or
press EXIT
on
the
otes
?
If the programme format is High Definition (16:9) and HDTV Receiver's
resolution is 576p or 576i, the Aspect Ratio is set to Auto, Letter Box, or
Pan & Scan.
If the programme format is High Definition
Receiver's resolution is 1080i or 720p, the
?
16:9,
or
Zoom.
If you select
?
(16:9) and and HDTV
Aspect Ratio is set to Auto, 4:3,
"Auto", the aspect ratio will be changed by programme
auto-
matically.
ip
?
While
watching TV,
you can change the picture aspect ratio using ARC on
the remote control. To view a high definition picture with 4:3 normal TV,
use the ARC button on the remote control to change the wide mode (Auto,
Letter
Box,
?T
o
view
button
a
on
or
high
Pan & Scan
definition
o
view
ton
on
16:9,
22
a
picture
the remote control to
(Auto, 4:3, 16:9,
?T
).
or
standard definition
Zoom).
change
(16:9) TV,
use
the ARC
the wide mode in the
cycle
Zoom).
the remote control to
or
with wide
picture
change
with wide
(16:9) TV,
use
the wide mode in the
the ARC but-
cycle (Auto, 4:3,
Special
Menu
Options
Clock Set
Enables the
adjust the time zone. Normally, your
signals transmitted by DTV stations. Choosing your time
rent time automatically.
1
to
user
Press MENU to
display
2
Select the SPECIAL
3
Use
4
Use
3
/
4
menu
using
3
/
then press
4
option
sets the
(SELECT)
then press 2
cur-
or 2.
or
to move to the third level.
to select On or Off then press
If you select Off, the clock is not set.
3
zone
using
on-screen menu.
to select the Clock Set
(SELECT)
/
the
clock is set
(SELECT).
4
5IfyouselectOn,use3/4tosetTimeZone.
6
Press MENU to return to the
remote control to return to
previous menu
TV viewing.
or
press EXIT
on
the
ote
?
There
are cases
where the TV station does not
time information
?
You have
no
causing the HDTV Receiver
way to manually set the clock.
send,
to set
sends wrong date and/or
incorrect time.
or
an
Caption
If the
Caption option is set to On, Closed Caption is displayed when
receiving TV programme with Closed Caption signal.
If the Caption option is set to Off, Closed Caption is not displayed.
ote
Caption
will appear
only
if
provided by
the broadcaster.
ip
?
?
If
available, you
can
also select
CC button
repeatedly
If
are
captions
on
a
closed
caption
while
viewing TV,
press
the remote control.
available, the DTV caption icon (
appears on the proGuide to indicate that you can
)
gramme information display, Programme
select one of those caption options with the CC button.
23
MENUOPRATI
Lock
(Parental Control)
Menu
Lock
Options
System
Allows you to set up specific programmes and ratings through blocking
schemes. Also allows you to activate or disable all of the lock schemes
previ-
set up. A PIN number is required to gain access to the LOCK menus.
When the Lock System is set to Off, the Programme and Programme Rating
ously
are
not effective.
Press MENU.
1
The main
2
appears.
to select the LOCK then press 2 or
to the second level.
Use
3
/
menu
4
When you have not entered
PIN number
a
Enter "0000" PIN number
using
When you have
entered
already
a
PIN
4-digit PIN number using the
personal 4-digit security PIN number.
3
/
to select the Lock
4
yet;
number;
numbered buttons to confirm the
System option.
3
(SELECT)
4
3/4toselectanoption(OnorOff).
5Use
previous
6
viewing.
Press 2
to move
the numbered buttons.
Enter the
Use
(SELECT)
to move to the third level.
or
Press MENU to return to the
menu or
press EXIT
on
the
on
the
remote control to return to TV
PIN
Change
Changes
the PIN number.
Follow
1
2
3
4
5
6
Use
3
steps 1-2
/
Press 2
as
shown above
to select the
4
Change
(SELECT)
or
Enter the
new
Enter the
same
(Lock System).
PIN
option.
to move to the third level.
4-digit
code.
code
again
to
verify.
Press MENU to return to the
remote control to return to
If you
forget your
If you
forget your
procedure below.
PIN
previous menu
TV viewing.
or
press EXIT
PIN number
number,
1. Press MENU. The main
to clear the current PIN
number, follow the
menu
appears.
2. Use 3 / 4 to select the LOCK then press 2
or
(SELECT)
to
move
the second level.
3. Use the Number buttons to enter the
The
4-digit
4. Enter
verify.
24
4-digit
number "7777".
PIN number is cleared.
a new
PIN number
using
number buttons then enter it
again
to
to
Lock
(Parental Control)
Menu
Block
Options (Continued)
Programme
Blocks any programme that you do not want to view or that you do not want
your kids to watch. If you tune in a blocked programme, a black screen with
a
pop-up box will appear. This
menu can
override
Programme
Edit
set-
menu
tings (page 18).
1
2
Press MENU.
The main
appears.
to select the LOCK then press 2 or
to the second level.
Use
3
/
menu
When you have not entered
a
PIN number
Enter "0000" PIN number
using
When you have
entered
already
a
3
/
4
to select the Block
yet;
PIN;
4-digit PIN number using the
personal 4-digit security PIN number.
3
to move
the numbered buttons.
Enter the
Use
(SELECT)
4
numbered buttons to confirm the
Programme
then press 2
or
(SELECT).
The programme list
screen
appears.
4Use3/4/1/2toaprogrammeontheblockprogrammemenu.
Press
(SELECT)
5 programme
to block or unblock the programme
720p,
or
1080i, the VIDEO OUT
and S-VIDEO OUT
are
jacks' signals
blocked. Press EXIT button to
restore the
output signals.
mark will appear to the
blocked programme.
Repeat step
3 to block
4 programme list
5
the block
menu.
The
Note: If you access this menu
when resolution is set to 576p,
on
or
right
of the station
name
to indicate the
unblock additional programmes in the
menu.
Press MENU to return to the
remote control to return to
previous menu
TV viewing.
or
press EXIT
on
the
25
MENUOPRATI
Lock
(Parental Control)
Menu
Options (Continued)
Parental Guidance
You
set the
can
specified
1
2
ratings
to block out all the programmes with
ratings
above
a
level.
Press MENU.
The main
appears.
to select the LOCK then press 2 or
to the second level.
Use
3
/
menu
4
When you have not entered
a
PIN number
Enter "0000" PIN number
using
When you have
entered
already
a
PIN
4-digit PIN number using the
personal 4-digit security PIN number.
3
/
4
to select the Parent
3
(SELECT)
4
4Use3/4toselectarating.
Press 2
G
yet;
number;
numbered buttons to confirm the
guidance option.
to move to the third level.
or
Content is not offensive to most viewers.
(General Audiences):
PG
to move
the numbered buttons.
Enter the
Use
(SELECT)
(Parental
Guidance
Recommended):
Content is such that
parents
may not want their children to view the programme.
M
(Mature Audience 15+): Mature Audience only.
specifically designed to be viewed by adults and
This programme is
therefore may be
unsuitable for children under 15.
MA
(Mature
Only. This
15+): Mature Adult only.Mature Audience
specifically designed to be viewed by adults
Adult Audience
programme is
and therefore may be unsuitable for children under 15.
AV
R
(Adult
Not for children under age 18.
and/or violence.
Blocking
26
15+)
(Restricted 18+):
sex
5
Audience strong violence
Off: Cancel the
Strong
elements of
blocking
Press MENU to return to the
remote control to return to
previous menu
TV viewing.
or
press EXIT
on
the
Information
Displays
ab
Programme
c
Banner
Display
The
Programme Banner appears
press the
(SELECT) button on
ed
whenever you tune to a
the remote control while
new
programme
viewing
a
or
pro-
gramme.
1
(SELECT) while watching a programme
The Programme Banner appears on the TV screen (programme number,
digital picture grade, audio, station name, and current time).
The Programme Banner can be displayed on the TV screen for a
Press
?
moment.
f
a) Programme number
Displays the current
b) Displays Analog
or
and Station
programme number and station
Audio Format
e)
Block information
the block information such
gramme blocked, audio
as
HD
(High Definition)
or
SD
only
or
as no
signal, rating blocked,
pro-
scrambled.
Date and Clock
Displays
2
such
type (Dolby Digital, MPEG I, MPEG II)
Indicates audio track is Dolby Digital, MPEG I, or MPEG II.
Displays
f)
name.
Digital broadcasting.
c) Digital Picture Grade
Displays the digital picture grade
(Standard Definition).
d)
name
the current date and clock.
(SELECT) again while the Programme Banner
Programme Banner disappears from the TV screen.
Press
The
is
displayed.
by
broadcast.
otes
?
Station
?
The scrambled programme may not be able to
name
and clock
are
displayed only
if
they
are
see
set up
the programme.
27
NORMALPETI
Information
abc
Displays (Continued)
d
e
f
g
Information
Programme
The
on
1
Display
Information appears whenever you press the INFO button
the remote control while viewing a programme.
Programme
Press INFO while
watching
a
programme
Information appears
Programme
a) Programme
on
the TV
screen.
title
Indicates title of current programme.
b)
Start Time and End Time
the start time and end time for the current programme.
Displays
c)
DTV
Icon
Caption
(
)
Indicates that the current programme contains
data service.
d)
Audio Format
e)
Block information
closed
caption
type (Dolby Digital, MPEG I, MPEG II)
Indicates audio track is Dolby Digital, MPEG I, or MPEG II.
the block information such
Displays
gramme blocked, audio
f)
digital
Content
Advisory
Content Advisory
Icon
only
(
or
as no
signal, rating blocked,
pro-
scrambled.
)
data is used for the
parental guide control to block
beyond predefined rating criteria set by users.
programmes that are
This icon means that the current programme contains content advisory data, and displays rating value of programme.
g)
Current
or
Next selection
Indicates the information is for current
change
2
between Current
Press INFO
The
or
or
or
next program. Use 1 / 2 to
Next.
EXIT while the
Programme
Information
Programme Information is displayed.
disappears from the TV screen.
ote
Station
28
name
and clock
are
displayed only
if
they
are
set up
by
broadcast.
Programme Guide
The
Programme Guide contains schedule and programme information for all
programmes. They also provide local over-the-air programmes information
including conventional digital programmes. Use the Programme Guide to find
programmes easily and conveniently and to view schedule and descriptive
programme information for the programmes.
To
Display
the
Programme
Guide
Press the GUIDE button
on
To Exit the
Guide
Programme
your remote control.
Press the EXIT button to return to the last programme you tuned to.
To
Navigate through programmes
Use 1 / 2 / 3 / 4
You
can move
RED
one
on
faster
page up
or
the Guides
your remote control to
navigate
the
guide
screen.
programmes by scrolling page-by-page with the
the remote control. Each button stroke scrolls
through
GREEN buttons
or
on
on
down.
To Tune to another current programme
Use 1 / 2 / 3 / 4 to select
You
To
can
watch the
Display
You
a
current programme then press
(SELECT).
programmed.
the Full Information window
program. Press INFO to
detail information window. To exit the detail information window, press
can
view detail informations for the
highlighted
display
INFO again.
29
NORMALPETI
Normal
Operation
PREV. button
Number buttons
Programme Selection
You
select
can
a
Number buttons
Use Number
(on
(0-9)
PREV. button
shown below.
as
programme
the remote
buttons to select
the remote
(on
control)
Press to return to the
a
programme
directly.
control)
programme you viewed. For example, if
the DTV Receiver is tuned to programme 55 and then you change to programme 56, pressing PREV. will return to programme 55.
FAV. button
(on
Press to scroll
on
the remote
(on
control)
your favorite programmes.
through
PR +/-- buttons
Use PR +/--
previous
the remote
control)
the remote control
HDTV Receiver
through
or 3
/ 4
or 3
on
/ 4
(on
the front
the front
panel
to
panel)
cycle
the
the programmes in memory.
LIST buttons
Press LIST
to select
a
on
the remote control and
Programme
List appears. Use 3 / 4
programme that you want to tune.
LIST button
PR +/-- buttons
FAV. button
Volume
VOL +/-- buttons
Adjusts
Adjustment
the volume of
analog
audio out
Audio Variable to On in the Audio
menu
on
to
HDTV Receiver. You must set
the Volume
use
Adjustment.
See
page 21.
VOL +/-- buttons
Use VOL +/--
on
the volume for
MUTE
(on
(on
the remote
control)
the remote control
analog
audio out
the remote
on
or 1
or 1
/ 2
on
/ 2
(on
the front
the front
panel
to
panel)
adjust
the HDTV Receiver.
control)
Press MUTE to turn off the volume for
analog/digital
audio out
on
the
HDTV Receiver.
otes
MUTE button
?
Before
Off, make sure that you have turned down the TV's
the minimum. Otherwise, sudden high volume sound may cause hearing
setting
volume to
Audio Variable to
speaker damage.
The volume of digital
or
?
audio out
on
HDTV Receiver
can
not be
adjusted
on
the
HDTV Receiver.
Signal
Shows the
signal strength bar for incoming signal to help you adjust the
antenna to the correct position for your location. You can view the signal
strength bar by pressing SIGNAL on the remote control.
SIGNAL button
30
Teletext
Operation
Teletext is
can
an
optional function,
therefore
those with the teletext
only
system
receive the teletext broadcast.
Teletext is
free service broadcast
a
the-minute information
prices
and many other
The teletext decoder
on
news,
by
some
TV stations which
gives up-to-
weather, television programmes, share
topics.
can
support the SIMPLE systems. SIMPLE (standard
teletext) consists of a number of pages
ing the corresponding page number.
which
selected
are
by directly
enter-
Teletext in Service
The HDTV Receiver
various
aspects such
This teletext
es
can
you access to teletext which is
text and graphics.
gives
as
be accessed
2
Press number
or
PR+/- buttons to select
720p,
1080i, the VIDEO OUT
and S-VIDEO OUT
are
jacks' signals
specific
servic-
Press TEXT to
3 pressing
4
a
service which broadcast
teletext.
access on
Follow the indications
or
teletext services and
the teletext.
on
teletext and
move
RED and GREEN buttons and so
Press TEXT
or
onto the next
step by
on.
EXIT to switch off teletext and return to TV
viewing.
blocked. Press EXIT button to
restore the
output signals.
Teletext on/off
1
Press TEXT to switch to teletext.
The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time
the
are
displayed
headline. The first page number indicates your
while the second shows the current page displayed.
2
screen
Press TEXT
or
on
selection,
EXIT to switch off teletext.
ote
If your TV is in zoom mode, the Teletext menu screen may be cut off.
In this case, set the TV's zoom mode to normal to display the menu
screen
properly.
Page
1.
in
which broadcast teletext.
1
Note: If you access this menu
when resolution is set to 576p,
by special
greatly improved
selection
Enter the desired page number
numbered buttons.
as a
three
digit
number with the
If
during selection you press a wrong number, you must complete
three digit number and then reenter the correct page number.
2.
Use PR
3.
Use RED/GREEN buttons to
(+/-)
buttons to select the
previous
move
or
the
next page.
up and down pages.
31
NORMALPETI
Teletext
Operation (Continued)
Special
Teletext Functions
MIX button
the teletext pages superimposed on the TV
To switch the TV picture off press this button again.
Displays
picture.
CANCEL button
Hides the teletext
screen
except page number.
INDEX button
Selects the index page.
SIZE button
Selects double
Press this
height text.
button to enlarge
to
the bottom half of the page. Press this button
enlarge
the normal
the
top half of the page. Press this button again
again
to return to
display.
SUBPAGE button
In teletext
mode, press this button
to select
sub page number. The sub
at the bottom of the screen. To hold or change the
a
page number is displayed
sub page, press the number buttons. Press this button
tion. (Refer to "Page selection" on page 30.)
?
again
to exit this func-
Use SUBPAGE button.
1)
Press SUBPAGE. The sub page number is
the screen.
2)
Enter the desired page number as a 4-digit number using number buttons. (ex press 0 0 0 9 for page 09.)
If you press a wrong number during selection, press SUBPAGE then
displayed
at the bottom of
enter the correct page number.
FREEZE button
the automatic page change which will
of 2 or more sub pages. When this button is
Stops
occur
if
pressed
teletext page consists
the stop symbol is dis-
a
played at the top left-hand corner of the screen and the
change is inhibited. To continue press this button again.
automatic page
REVEAL button
Press this button to
dles
or
display.
32
puzzles.
display
concealed
Press this button
information, such
again
to
remove
as
solutions of rid-
the information from the
Programming
the Remote Control to
Operate
The HDTV Receiver remote control is
trol that
can
be
to
programmed
the TV
a
operate
multi-brand
or
universal remote
con-
most remote-controllable TVs from
other manufacturers.
ote
The remote control may not be able to control all models of other brands.
1
Test your remote control.
To find out whether your remote control
gramming, turn on the TV and press the TV
pointing at the TV. Use the TV POWER and
the TV responds properly. If not, the remote
ming.
Turn
on
the TV to be
TV without prothe remote control while
operate
can
on
a
TV PR +/-- buttons to
control
requires
see
if
program-
programmed.
2
3
holding
4
5 properly. not, repeat
Find the manufacturer code for your TV.
(Refer
to pages
34-35)
While
down TV POWER button, press the number buttons
to select the manufacturer code for your TV.
Te st the remote control functions to see if the device
If
You
can
control your TV
from
using
step 3-4.
the buttons below.
By pressing
You
POWER
Turn the TV
TV/AV
Switch the TV's
input
responds
can
on or
off.
input
source
between the TV and other
sources.
PR +/--
Scans up
VOL +/--
Adjust
MUTE
Temporarily
or
down
through
memorized programmes.
the volume of the TV.
turns TV sound
OFF, press again
to restore.
33
REF NC
Remote Control Codes for TVs
BRANDS
CODES
BRANDS
CODES
BRANDS
CODES
ADMIRAL
137 204
ELBE
058 144 157 160
HITACHI
011 013 015 017
ADYSON
159 219
AKAI
009 010 108 132
192 246
021 022 023 024
ELBIT
108 248
028 029 030 035
133 135 139 140
ELECTROVENDA
108
039 040 041 048
156 174 175
ELEKTRONIKA
108
053 054 055 056
064 086 108 110
ELIN
108
057 120 127 128
155 171
ELITE
064 149
129 134 135 140
ALBA
009 060 064
ELMAN
144
143 145 147 151
ALLSTAR
108
ELTA
010 171
156 159 173 193
AMSTRAD
006 025 157
EMERSON
108 204
219
AMWAY
108
ESC
108
HYPER
009 159 163 171
ANITECH
010 049 108 185
ETRON
133
ICE
009 010 064 108
219
EUROPHON
144 159
ANTECNO
064
EXPERT
089
ARC EN CIEL
173 179 239
FENNER
171
ASA
087 102 108 235
FERGUSON
078 079 080 160
INGERSOLL
171
236
182 195 198 199
INNO HIT
159 189 237
ASBERG
185
200 201 202
INTERBUY
010
ASORA
171
FINLANDIA
194 195
INTERCORD
233
ATLANTIC
089 197
FINLUX
008 087 102 104
INTERFUNK
108 109 113 130
AUDIOSONIC
085
105 107 108 140
133 134 135 137
AUTOVOX
159 163 197
144 159 161 174
141 146 147 148
BANK
232
189 235 236
165 179 210
BEKO
045 085 086 108
FIRST-LINE
144
250
FISHER
086 208 222 233
BESTAR
086
FORMENTI
108 149
IRRADIO
163 235 237
BLAUPUNKT
031 091 092 096
FRABA
108
ITC
144 159
097 098 099 210
FRONTECH
136 171 220
ITS
009 010 064 171
253
FUBA
073 109
ITT
141 151 186
BONDSTEC
163
FUJITSU GENERAL 088 159 197
JVC
009 169
BOSCH
210
FUNAI
010
KAIDO
136
BRANDT
173 179 225 239
GALAXIS
108 185
KAPSCH
089 147 148 197
GALERIA
171
KARCHER
084 108
AKURA
ELECTRONIQUE
171
IMPERIAL
043 049 108 139
144 154 165 255
INTERVISION
010 086 108 132
144 166
BRIONVEGA
204
GBC
137 144 171
KATHREIN
109
BSR
144
GEC
011 108 129 147
KAWA
009
BUSH
009 136 139 144
159 189
KENDO
060 108 137 157
064 137 144 164
KENNEDY
197
171
KNEISSEL
108
232
GELOSO
CENTURY
165 204
CGE
139 165 210
GENERAL
171
KONKA
009
CIE
025 108 170
GENERAL TECHNIC
171
KORTING
086 204 209
CLATRONIC
009 010 064 108
GOLDHAND
159 171
KUBA
233
144 149 159 164
GOLDSTAR
038 050 108 110
KUBA ELECTRONIC
233
165 171 185
136 144 159 163
KURA
134
CLARIVOX
033
166 171 191 219
LENCO
108 170
CONDOR
108 149 191
237
LG
001(Default)
CONIC
219
CONTEC
CONTINENTAL
GOODMANS
038
009 064 108 109
050 108 110 136
171 222
110 120 159 170
144 159 163 166
173 179 225 239
171
171 191 219 237
EDISON
GORENJE
086
LIESENKOTTER
108 210
COSMOS
108
GPM
010 064
LIFETEC
010 064 108 170
CROSLEY
165 204
GRANADA
027 105 108 111
LOEWE
109 113 204 205
CROWN
084 085 086 108
121 134 140 159
LOGIK
070 227
144 171 185
162 167 187 194
LUMA
137 197
195 238
LUXOR
102 104 132 133
CS-ELECTRONICS 064
DAEWOO
051 108 120 127
GRUNDIG
091 092 093 094
134 135 138 140
170
095 097 098 100
143 145 153 156
DANSAI
010 219
101 172 232 238
174 186 237
DE GRAAF
108 134
HCM
010 108 159 171
M ELECTRONIC
103 104
DECCA
070 108 159 161
HIFIVOX
173 179 239
MAGNADYNE
163 164 204
162 184 189 190
HINARI
010 064 108 133
MAGNAFON
199
171
MAGNASONIC
108
204
MARANTZ
108
206
DECCAVIDEO
108
HIT
DUAL
233
MARSHAL
064
DUMONT
204
MATSUI
009 016 025 060
061 062 063 070
108 131 136 152
154 159 171 172
34
Remote Control Codes for TVs
(Continued)
BRANDS
CODES
BRANDS
CODES
BRANDS
CODES
MERRIT
132
PROFEX
108 136 171
SPECTRA
170
METZ
047 092 097 098
PROFITRONIC
108
STARLITE
108 171
100 101 108 204
QUELLE
002 010 014 019
STARLUX
171
207 254
025 059 060 072
STERN
088 089 137 157
075 076 077 097
084 086 087 088
113 204 222 224
092 097 098 100
SUNSTAR
108 171
240
101 102 175
SUPERTECH
108 139 152 171
MITSUBISHI
197
MIVAR
044 042 159 235
RADIOLA
108
TADISTAR
108
MNARTT
007
RADIOTONE
010 085 108 171
TASHIKO
108 159 218
MTC
086 109 134
REDIFUSSION
187
TEC
108 139 144 159
MULTITECH
136 159 171 185
REVOX
109
MURPHY
232
REX
088 089 137 157
TECHLINE
185
NAONIS
137
158 164 197 246
TECHNISAT
108 165
NECKERMANN
037 059 060 092
247
TECNISON
108 171
170 171
098 100 101 108
RFT
064 085 135 204
TEKON
171
109 113 115 118
RITAR
138
TELEAVIA
173 178 179 225
119 134 135 137
ROADSTAR
108
143 157 159
ROSITA
171
NEI
064 108
SABA
079 146 147 173
NIKKAI
219
179 181 193 195
TELEOPTA
171
NIKKO
108
225 226 239
TELERNT
109
NOBLIKO
232 235
025 060 070 136
TELETECH
165 171
NOGAMATIC
173 179 239
159
TELETEXT
115
NOKIA
014 019 032 102
SAKIO
171
TELETON
088
103 104 108 132
SALORA
019 032 103 104
TELETON
089 134 159 197
133 134 135 138
132 133 134 135
TENSAI
064 108 144 149
140 141 145 146
137 138 140 142
147 148 156 174
143 145 150 156
TENSON
171
129 173 179 180
174 237 241
TESLA
204
THOMSON
052 078 079 134
NORDMENDE
SAISHO
239
TELEFUNKEN
079 177 179 181
193 195 200 210
171 191
181 193 195 225
SAMBERS
235
226 228 239
SAMSUNG
004 010 050 086
173 178 179 181
193 195 225 239
NORMN
108
108 117 126 171
NOVA
087
220 237
OCEANIC
032 103 104 135
SANY
193
026 028 066 072
140 156
SANYO
014 018 019 020
075 087 097 102
THORN
011 014 016 018
OKANO
108
032 034 071 086
108 116 135 141
ONWA
009 010 064
087 189 218 221
145 146 160
ORAVA
108
222 223
THORN-FERGUSON
160 188 200 227
ORBITER
086
009 064 088 108
TOSHIBA
012 016 026 036
ORION
025 059 060 061
133 141 159 163
062 064 070 108
233
TOWADA
144 185
010 064 108 144
TRISTAR
010 064
110 118 219
SCHNEIDER
SEG
037 222 232
OSAKE
106
159 165 171 185
TRIUMPH
025 219 236
OTTO-VERSAND
002 005 009 014
219
UHER 089
108 109 149 185
059 060 081 082
SEI-SINUDYNE
025 108 204 212
083 085 092 097
SELECO
088 089 137 157
ULTRAVOX
108 164 185 204
197 222
UNIVERSUM
174
098 100 101 108
197 233
109 111 113
SENTRA
064 133
UNIVOX
204
PAEL
235
SHARP
081 082 083 222
VESTEL
108
PANASONIC
002 003 005 167
SHINTOM
108
VIDEOSAT
165
168 229
SHINTOSHI
108
VIDEOTON
178 193
PATHE CINEMA
144
SHIVAKI
108
VIDEOWAY
230
PATHE MARCONI
173 179 225 239
SIAREM
204
VISION
108 149
PHILCO
090 108 139 144
SIEMENS
092 096 097 098
VOXSON
137 204
148 165 204
100 101 108 210
WALTHAM
178
065 066 067 068
218 219 221
WATSON
064 108 149 171
PHILIPS
069 092 108 109
SIESTA
085
WEGA
208 222
111 112 114 115
SILVER
010 064
WHITE
108 110 149
116 119 122 123
SINGER
108 164 204
WESTINGHOUSE
124 125 193 212
SINUDYNE
118 131
YOKO
251 252
SMARAGO
172
144 159 164 170
PIONEER
193
SOLAVOX
133
171
PRANDONI-PRINCE
137 235
SONOLOR
140 156
ZANUSSI 137 197
PRIMA
219
SONTEC
108
ZENITH 231
PRO VISION
108
SONY
072 074 211 212
010 064 108 136
213 214 215 216
217 222
35
REF NC
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
problem
before
Symptom
service.
Solution(s)
HDTV Receiver does
not turn
contacting
Plug
the power cord into
a
wall power outlet
securely.
on.
Fragmented picture
and
Check your antenna
input, location,
and
signal strength.
unclear sound.
No
picture.
Make
sure
the correct video
Make
sure
that the
format is selected.
display
right component type
is selected.
If HDTV Receiver is connected to your monitor or TV via the COMPONENT VIDEO
jacks on the back panel, the Output Selection must be set to YPbPr (refer to Display
Format
page 16.). Otherwise, you will probably see an abnormal picture.
If HDTV Receiver is connected to your monitor or TV via the RGB port on the back
Setup
on
panel,Output Selection must be set to RGB (refer to Display Format Setup on page
16.). Otherwise, you may not be able to see a picture.
Select the Auto Programme or Programme Edit functions if you have not already
done
so.
Check to make
is selected
on
The antenna
sure
all the cables
your TV.
For
installed
are
example,
Video 1
may be low.
antenna location and direction.
signal strength
Due to
copyright restrictions, you may
grammes in the high definition format.
For
Normal
picture
but
information about
more
correctly
and that the proper
2.
or
Check the
signal strength
not be able to view
connections, please refer
some
Make
sound.
sure
Picture is distorted.
Make
sure
to connections
Make
sure
Make
sure
the video
output is connected
Point the remote control
does not work
Operate
the remote control within 7
Remove
possible
Replace
exhausted batteries with
properly.
on
obstacles
the remote
to the TV.
the HDTV Receiver.
m.
blocking
the
signal.
new ones.
Reset the HDTV Receiver
36
the power
on
properly.
sensor on
operating normally.
cord, wait
at least 30
You
can
reset the HDTV Receiver
seconds, and then plug it in again.
as
follows:
adjust
the
definition pro-
the proper format is selected.
the proper aspect ratio is selected.
The remote control
Unplug
high
the TV is not muted.
Check that the HDTV receiver is connected
The HDTV Receiver is not
and
Check volume levels.
no
source
pages 9-14.
Specifications
Television
DVB-T Australian Standard
System
Frequency Range
RF
DVI
Loop
:
529.5 to 816.5 MHz
Video
Link connector
RCA
type Jack
connectors
RGB Out
(1), 15-pin connector
1080i, 720p, 576p RGB
S-Video Out
Output
Mini-DIN
(1), 4-pin
Video Out
Output
Audio
Digital
Analog
Audio
Dimension
(W
Audio Out
Output
x
(1), Typical
Composite
RCA
type Jack
connector
Coaxial, Optical (Dolby Digital, PCM output)
Output
Authorized Service Port
H X
9-pin
(2) (Variable Output Level)
Serial Port
(1)
360x60x262mm
D)
Weight
3.5
kg
110-240V, 50/60Hz
Power
Requirements
AC
Power
Consumption
15W
Humidity
0 to 99
Storage Temperature
-20 to 60
Operating Temperature
0 to 40
percent
non
degrees
degrees
condensing
Celsius
Celsius
RFcable....................1
Video and Audio
?
REF NC
(1)
Component Out (1 Set), Typical
1080i, 720p, 576p, 576i YPbPr
Output
576i
Acesori
75 ohm unbalanced
576i Y/C
Video
Enviroment
(1)
(1), DVI-D Single
1080i, 720p, 576p digital RGB
Output
S-Video
UHF
DVI-HDTV Out
Component
Input/O
177.5 to 226.5 MHz
Out To TV
Out
Output
RGB
:
ANT IN
Inputs
ANT
VHF
Compliant
(L/R) cable
Component (YPbPr) cable
.
.
.
.
.
.
.
.
.
.1
.1
RemoteControl..............1
Batteries(sizeAAA)...........2
Design
and
specifications
are
subject
to
change
without
prior
notice.
37
P/NO
:
3834RB0002J
Download PDF