LG | NS8421P | LG NS8421P Owner’s Manual

NS8421TPC_HA2ALL
Stylish DVD
System
Micro
OWNER'S MANUAL
MODEL
:
NS8421P
(Sub woofer: NW-840AT
Speaker: NS-820)
Before
connecting, operating
please
read this instruction booklet
or
adjusting this product,
carefully and completely.
SERIAL NUMBER:
CAUTION
You
can
find the serial number
This number is
To reduce the risk of electric
shock, do
not remove the cover or back
product.
There
the back of the unit.
others. You should record
requested
and retain this
permanent record of your
Model No.
are no user-
serviceable parts inside. Refer
to qualified service personnel.
on
to this unit and not available to
guide
as a
information here
purchase.
Warning:
of this
unique
servicing
Serial No.
______________________________
______________________________
Date of Purchase_________________________
Warning:
To reduce the risk of fire
Notes
or
electric shock, do not expose this
to
product
rain,
or
dripping
moisture. Do
as
vases,
on
Copyrights:
It is forbidden by law to copy, broadcast, show,
broadcast via cable, play in public, or rent copyrighted
material without permission. This product features the
splashing water,
not place objects
or
filled with water such
on
the
protection function developed by Macrovision.
Copy protection signals are recorded on some discs.
When recording and playing the pictures of these
discs picture noise will appear. This product
incorporates copyright protection technology that is
protected by method claims of certain U.S. patents
and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use
of this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
copy
product.
Warning:
This digital video disc player
employs a laser system. Use of controls,
adjustments, or the performance of
procedures other than those specified
herein may result in hazardous radiation
exposure.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
prevent direct exposure to
Warning:
laser beam, do not open the enclosure.
Visible laser radiation when open.
To
Warning:
Never stare
directly
into the
PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE
SCAN PICTURE PROBLEMS, IT IS ECOMMENDED
THAT THE USER SWITCH THE CONNECTION TO
ARE QUESTIONS REGARDING OUR TV SET
Caution: Do not install this product in
2
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
THE 'STANDARD DEFINITION' OUTPUT. IF THERE
laser beam.
confined space such
similar unit.
COMPATIBLE WITH THIS PRODUCT AND MAY
as a
book
case or
a
COMPATIBILITY WITH THIS MODEL 525p AND 625p
DVD PLAYER, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER.
Contents
Operation.......................20
PlayingaDVDorVideoCD.............20
PlaybackSetup...................20
Introduction......................4
SymbolusedinthisManual..............4
AbouttheSymbolDisplay............4
NotesonDiscs........................4
HandlingDiscs......................4
StoringDiscs........................4
CleaningDiscs......................4
TypesofPlayableDiscs.................5
Regionalcode........................5
Disc-relatedterms.....................6
FrontPanel...........................7
DisplayWindow........................7
RemoteControl........................8
GeneralFeatures.....................20
MovingtoanotherTITLE..............20
.20
Moving to another CHAPTER/TRACK
.
.
.
Search............................20
ChangingtheAudioChannel
Still Picture and Frame-by-Frame Playback
.
.
.
.
.
.
.
.
.
.
.
.20
.21
SlowMotion........................21
Random...........................21
RepeatA-B........................21
Repeat............................21
3DSurround.......................21
TimeSearch........................21
Zoom...........................22
MarkerSearch...................22
RemoteControlOperation..............8
Remote Control Battery Installation
.8
Speakers.............................9
SpecialDVDFeatures.................22
Checking the contents of DVD discs: Menus .22
InstallationandSetup.............10
CameraAngle.....................22
.22
ChangingtheAudioLanguage
.
.
.
.
.
.
TitleMenu........................22
DiscMenu........................22
.10
DisplayWindowofSubwoofer
.10
Antenna(Aerial)Connections
SettingupthePlayer..................11
DVDPlayerConnections...............11
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Video and Audio Connections to Your TV
AudioConnectiontoYourTV
2.1 Channel Speakers Connections
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.11
.11
.12
ConnectingtoDVDplayer.............12
.12
Connecting to an optional equipment
.12
SoundAdjustmentofSpeakers
.13
PresettingtheRadioStations
ListeningtotheRadio.................13
.14
Audio Connection to Optional Equipment
On-ScreenDisplay....................15
.15
Playback Status/Restrictions
InitialSettings........................16
GeneralOperation...................16
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
LANGUAGE.......................16
?MenuLanguage...................16
?DiscAudio/Subtitle/Menu
.16
DISPLAY..........................17
.
.
.
.
.
.
.
.
AUDIO...........................17
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.18
.18
.18
?Vocal............................18
OTHERS..........................18
?PBC............................18
?
.
.
.
.
.
.
?AutoPlay........................18
?
B.L.E.
...........................18
LOCK(ParentalControl)..............19
?Rating..........................19
.19
?Password(SecurityCode).
?CountryCode.....................19
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
MovingtoanotherTrack.............24
RepeatTrack/All/Off................24
Search...........................24
Random..........................24
RepeatA-B.......................24
3DSurround.......................24
ProgrammedPlayback................25
.25
RepeatProgrammedTracks
.25
Erasing a Track from Program List
.25
Erasing the Complete Program List
ViewingaJPEGDisc..................26
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SlideShow........................26
StillPicture.........................26
MovingtoanotherFile................26
Zoom.............................26
.
?TVAspect.......................17
?DisplayMode.....................17
?ProgressiveScan...................17
?DolbyDigital/DTS/MPEG.
?SampleFreq.(Frequency).
Dynamic Range Control (DRC)
.
Subtitles.........................22
.23
Playing an Audio CD or MP3/WMA Disc
.24
Audio CD and MP3 / WMA Disc Features
Pause...........................24
Torotatepicture.....................26
To listen to music watching picture
.26
.27
PlayingaDVDVRformatDisc
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
MaintenanceandService...............27
AdditionalFeatures...................28
LastSceneMemory..................28
ScreenSaver.......................28
SystemSelect........................28
Reference.......................29
LanguageCodes.......................29
CountryCodes........................29
Troubleshooting.......................30
Specifications.........................31
.
3
Introduction
To
proper use of this product, please read this
owner's manual carefully and retain for future
About the
Symbol Display
ensure
reference.
"
"
may appear on your TV display during
and indicates that the function explained in
operation
this owner's manual is not available
This manual
provides
information
on
the
operation
on
that
specific
DVD video disc.
and maintenance of your DVD player. Should the unit
require service, contact an authorized service location.
Notes
Symbol
Used in this Manual
Handling
The
lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk
of
Discs
on
Discs
Do not touch the
the
disc
on
by
the
playback side of the disc. Hold
edges so that fingerprints do not get
the surface. Never stick paper
or
tape
on
the disc.
electric shock.
The exclamation
point alerts you to the
presence of important operating and
maintenance / servicing instructions.
Indicates hazards
unit itself
or
likely
to cause harm to the
other material
damage.
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
Note:
Indicates
special
notes and
operating
features.
Tip:
Indicates
tips
and hints for
A section whose title has
is
applicable only
symbol.
4
making
one
to the disc
the task easier.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
of the
following symbols
represented by the
DVD
DVD and finalized DVD±R/RW
VCD
Video CDs
CD
Audio CDs
MP3
MP3 Discs
WMA
WMA Discs
JPEG
JPEG Discs
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
vinyl
records.
Types
of
Playable
Discs
Regional
code
This DVD
player
manufactured for
DVD
is
designed and
playback of region
encoded DVD software. This unit
(8cm/12cmdisc)
play only
DVD discs labeled "4"
"4"
can
or
"ALL".
4
Video CD
(VCD)
(8cm/12cmdisc)
Notes
Audio CD
?
on
Regional
Most DVD discs have
numbers in it
(8cm/12cmdisc)
Codes
clearly
a
globe
visible
on
number must match your DVD
code or the disc cannot play.
In addition, this unit
plays
DVD -R, DVD +R,
?
DVD -RW, DVD +RW, Kodak Picture CDs, SVCD, and
CD-R / CD-RW that contains audio titles, MP3, WMA,
and/or JPEG files.
with
the
one or more
cover.
This
player's regional
If you try to play a DVD with a different region code
from your player, the message "Check Regional
Code" appears on the TV screen.
This indicates
capable
a product feature that is
playing DVD-RW discs
with Video Recording format.
of
recorded
Notes:
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD -R, DVD +R,
DVD -RW, DVD +RW) disc itself, some CD-R/RW
(or DVD -R, DVD +R, DVD -RW, DVD +RW) discs
cannot be played on the unit.
?
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
?
?
(the
irregularly shaped CDs (e.g., heartoctagonal) since they may result in
Do not
use
shaped
or
malfunctions.
Notes
on
DVDs and Video CDs
Some
playback operations
of DVDs and Video CDs
may be intentionally programmed by software
manufacturers. This unit plays DVDs and Video CDs
according
to disc content
manufacturer, therefore
designed by the software
playback features may
some
not be available or other functions may be added.
Manufactured under license from
Dolby
"Dolby", "Pro Logic", and the
symbol are trademarks of Dolby
Laboratories.
double-D
Laboratories.
DTS and DTS
Digital
Digital Out
Systems,
Theater
are
trademarks of
Inc.
5
PBC:
Playback Control (Video CD only)
Playback control is available for Video CD (VCD)
Disc-related terms
DVD±R/DVD±RW
DVD -R and DVD +R
are
two different standards for
recordable DVD drives and discs. This format allows
information to be recorded onto the DVD disc
DVD +RW and DVD -RW
once.
re-writable media,
are
only
two standards for
meaning the DVD content can be
Single-sided discs can hold
erased and re-recorded.
4.38
Gigabytes
much. There
and double-sided discs hold twice
are no
dual
layer single
sided recordable
(Video CD)
with
quality
CDs.
Title
(DVD only)
generally a distinct section of a DVD disc. For
example the main feature could be title 1, a
documentary describing how the film was made could
A title is
A VCD holds up to 74 minutes (650 MB disc) or 80
minutes (700 MB disc) of MPEG-1 full-motion video
along
typical computer-like operations. Moreover, still
pictures of high resolution can be played if they are
included in the disc. Video CDs not equipped with
PBC (Version 1.1) operate in the same way as audio
as
discs.
VCD
version 2.0 disc formats. PBC allows you to interact
with the system via menus, search functions, or other
stereo sound.
MPEG
be title 2, and cast interviews could be title 3. Each
assigned a reference number enabling you to
locate it easily.
title is
Chapter (DVD only)
chapter is a segment
A
MPEG is
an
international standard for video and audio
compression. MPEG-1 is used in encoding video for
VCD and provides for multichannel surround sound
coding such as PCM, Dolby Digital, DTS and MPEG
audio.
film
On
MP3 is
audio
popular compression format used for digital
files that yields very high near-CD quality.
a
WMA
Windows media audio file. A type of
developed by Microsoft Corp.
coding
/
decoding
of
a
a
title such
series. Each
as a scene
in
a
is
may not be recorded.
Scene
MP3
interview in
chapter
assigned a chapter number, enabling you to locate the
chapter you want. Depending on the disc, chapters
or one
(VCD)
video CD with PBC
(playback control) functions,
pictures are divided into
sections called "scenes". Each scene is displayed in
the menu screen and assigned a scene number,
enabling you to locate the scene you want. A scene is
composed of one or several tracks.
a
moving pictures
and still
Track
JPEG
Expert Group. JPEG is a compressed
that allows you to save images with no limit
Joint Pictures
file format
on
the number of colors.
A distinct element of audiovisual information, such
as
the
picture or sound track for a specific language
(DVD), or a musical piece on a video or audio CD.
Each track is assigned a track number, enabling you
to locate the track you want. DVD discs allow one
track of video
of audio.
6
(with multiple angles)
and several tracks
Front Panel
POWER
Switches the
player ON
and OFF.
PLAY(N)
playback.
OPEN/CLOSE(Z)
Opens
or
Starts
closes the disc tray.
PA
SOP
Display
window
Shows the current status of the
player.
Disc
Tray
Insert
a
Remote Sensor
disc here.
Point the DVD
Player
remote control here.
STOP
Display
(
x
) Stops playback.
Window
Indicates current
function
player
(Play, Pause)
DVD inserted
CD Audio CD inserted
Indicates repeat mode
VCD Video CD inserted
SVCD
Super
Video CD inserted
Indicates
DTS and
encoding
Dolby digital
of the current disc.
CHP/TRK
current
Indicates
chapter
or
Indicates total
time/elapsed
playing
time
track number
S VCD
CHP
AD
B
CD TRK
ALL
7
Remote Control
OPEN/CLOSE
Opens
?
Switches DVD
(DVD Player)
Player ON
?
and OFF.
?
track number
on
the
program menu or a mark
MARKER SEARCH
on
the
a
?EQ
Selects the 4 types of sound
?
menu.
MARKER
Turns off
point during playback.
SEARCH
MARKER SEARCH
or
volume of
speakers.
?
menu.
PRESET +/-
Sets the radio
SCAN(m/M)
Search backward
sound.
speaker
VOL +/-
Adjusts
?
Displays
quality.
MUTE
?
?
Marks any
FM/AM
Selects FM and AM.
a menu.
CLEAR
Removes
ST/MN
Selects STEREO and MONO.
0-9 number buttons
Selects numbered items in
(subwoofer)
Switches subwoofer ON and OFF.
and closes the disc tray.
POWER
POWER
?
forward.
frequency
channel.
INPUT
Selects the DVD/ TUNER/ AUX
PAUSE/STEP(X)
playback temporarily/ press
repeatedly for frame-by-frame
playback.
mode.
Pauses
?
LEVEL +/-
Uses to
adjust
sound level of
subwoofer.
PLAY(N)
playback.
?
Starts
TUNING +/-
Selects the radio
frequency.
DVD MENU
Accesses
menu on a
bBvV(left/right/up/down)
Selects
an
item in the
menu
?
menu.
ENTER
Confirms
SKIP(./>)
Go to next chapter or track. Returns
to beginning of current chapter or
track or go to previous chapter or
DVD disc.
track.
?
selection.
STOP(x)
Stops playback.
DISPLAY
Accesses On-Screen
display.
AUDIO
Selects
an
audio
a
subtitle
a
DVD
RETURN
Removes the setup menu,
?
language.
ANGLE
Selects
camera
angle
?
?
if
or removes
setup
?
Remote Control
Operation
Point the remote control at the remote
sensor
and
video
image.
REPEAT
remote
AAA AAA
new
batteries and
types of batteries such
standard, alkaline, etc.
never
as
title all.
A-B
sequence.
Battery installation
battery cover on
Detach the
press the buttons.
8
the program list.
ZOOM
Repeat
mix different
on
Repeat chapter, track,
?
Do not mix old and
track
menu.
tracks in random order.
Remote Control
a
Enlarges
?
RANDOM
Plays
PROGRAM
Places
?
Accesses
displays
the video CD with PBC.
available
SETUP
title menu, if available.
Displays
language (DVD).
SUBTITLE
Selects
TITLE
?
the
rear
of the
control, and insert two batteries
(size AAA)
with
and
aligned correctly.
Speakers
1
1
Remote Sensor
Point the subwoofer remote control here.
2
3
8
player.
MEMORY/ SET/ CLEAR
Selects the MEMORY/ SET/ CLEAR
3
7
function.
4
5
Introducin
window
Display
Shows the current status of the
2
4
-
TUNING
+
Selects the radio
6
5
frequency.
DVD/ TUNER/ AUX
Selects the DVD/ TUNER/ AUX mode.
6
-
VOLUME
Adjusts
7
+
volume of
speakers.
Power indicator
Lights
turned
8
green when the DVD
player
is
on.
STANDBY/ON
Switches the subwoofer ON and OFF.
9
SPEAKER Connectors
Connect the left and
right speakers
to
these terminals.
9
10
RESET
This button is used to solve the
as
problem
following symptom;
When the power can not on, even if
power cord is connected to the outlet.
?
10
?
When the window
display
does not
display.
?
When the subwoofer does not operate
normally.
15
11
FM/ AM antenna
jacks (OPTIONAL)
Connect the FM/AM antenna cables from
the
OPTIONAL
12
14
of subwoofer.
DVD and AUX IN
(L/R) jacks
Connect the audio output cable from the
DVD player and an external unit (Audio
11
13
rear
system, TV/Monitor, VCR etc.)
to these
terminals.
12
13
AC Power Cord
Plug
14
into the power
source.
Main POWER switch
Switches the main power of subwoofer
ON and OFF.
*
15
Setting
the
voltage (OPTIONAL)
If your set is equipped with a voltage selector at the
back side, be sure to set it to your local power
supplied before connecting the AC power cord.
15
VOLTAGE SELECT SWITCH
:
OPTIONAL
9
Installation and
Setup
window of Sub woofer
Display
1
2
3
6
1
Turns off
2
speaker
sound indicator.
FM/AM, Sound level, PRESET
or
VOLUME etc.
indicator.
3
Indicator the current radio
Antenna
4
5
4
Indicators current
5
FM/STEREO
6
Indicator the current stereo effect.
E.Q.(Equalizer)
mode.
Indicator.
receiving
frequency.
(Aerial) Connections
Connect the
supplied
FM/AM antennas for
listening
to the radio.
(OPTIONAL)
AM
loop antenna
(aerial) (Supplied)
FM external
75
coaxial
antenna(aerial)
(not supplied)
AM
cable
(MW) loop
(aerial)
(Supplied)
FM external
(aerial)
(not supplied)
antenna
FM indoor
antenna(aerial)
antenna
AM
For AM
the
Position
it for the
best
loop
(MW) reception, connect
antenna (aerial) to the
terminal marked AM
FM 75
reception
FM wire antenna
(supplied)
Notes:
?To
?
?
10
Be
prevent noise pickup, keep the AM loop
After
to
antenna away from the unit and other
extend the FM wire antenna.
fully
connecting
sure
the FM wire antenna,
keep
it
as
horizontal
as
possible.
components.
Setting
The
up the
Player
nearby TV, VCR, or radio
may be distorted during playback. If this occurs,
position the player away from the TV, VCR, or radio,
or turn off the unit after removing the disc.
picture
and sound of
a
Video and Audio Connections to Your TV
Make
sure
the DVD
TV and not to
to the video in
video cable
Player Connections
devices
jack
on
directly
to the
jack on the DVD
using the
the TV
(V).
S-Video: Connect the S-VIDEO OUT
your TV and other equipment there are
various ways you can connect the player. Please refer
to the manuals of your TV, stereo system or other
Depending
is connected
Video: Connect the VIDEO OUT
player
DVD
player
VCR, otherwise the DVD image could
be distorted by the copy protection system.
a
DVD
on
Player
to the S-Video in
the S-Video cable
Component
necessary for additional connection
information.
as
jack
on
jack
the
on
the TV
using
(S).
Video
(Color Stream ): Connect
the
COMPONENT VIDEO OUT/PROGRESSIVE
SCAN jacks on the DVD Player to the
corresponding in jacks on the TV using
cable (C).
an
Y Pb Pr
Progressive Scan (ColorStream pro):
If your television is a high-definition or
"digital ready" television, you may take
advantage of the DVD Player's progressive
scan output for the highest video resolution
possible.
If your TV does not accept the Progressive
Scan format, the picture will appear
scrambled if you try Progressive Scan on
the DVD Player.
?
?
Notes:
?
?
Set the
Progressive to "On" on the setup
progressive signal, see page 17.
menu
for
Set the progressive to "Off" by removeing any disc
from the unit and close the disc tray. see that "no
disc" is displayed on the display window. Then press
STOP and hold it for five seconds before
releasing
it.
?
Progressive
scan
video connections
does not work with the
analog
(yellow VIDEO OUT jack).
Audio Connection to Your TV:
Connect the left and
right AUDIO OUT jacks of the
Player to the audio left and right IN jacks on the
TV (A) using the audio cables. Do not connect the
DVD Player's AUDIO OUT jack to the phono in jack
(record deck) of your audio system.
DVD
11
2.1 Channel
Speakers
Connecting
Connections
1.
Connecting
1.
3.
player
Right AUDIO OUT jacks on
right in jacks
(DVD) on your subwoofer (A).
Connect the speakers using the supplied speaker
cords by matching the colors of the terminals and
those of the cords. (L, R).
To enjoy the sound from the DVD player, press
INPUT
Player
on
optional equipment
an
Connect the Left and
Right AUDIO OUT jacks on
optional equipment (VCR, CD Player, TV,
AUDIO, etc.) to the audio left and right in jacks
(DVD) on your subwoofer (A).
To enjoy the sound from an optional equipment,
an
Connect the Left and
the DVD
2.
to DVD
to
to the audio left and
the remote control to select
source
2.
press INPUT on the remote control to select
of the subwoofer to AUX.
source
Sub woofer
of
the sub woofer to DVD.
Notes:
--
Be
sure
to match the
speaker
cord to the
the components: 3 to 3
appropriate
and # to #. If the cords are reversed, the sound
will be distorted and will lack base.
terminal
--
If you
use
front
rating, adjust
--
on
speakers
the volume
with low maximum
carefully to
speakers.
excessive output on the
Do not disassemble the front
cover
input
avoid
of
OPTIONAL
supplied
speaker.
--
The sound is muted
during playing
back
a
disc
recorded DTS.
A
R
L
AUDIO OUTPUT
VCR
or
Sound
optional equipment
Adjustment
POWER switch
(rear
of
Speakers
of the
subwoofer)
When
OPTIONAL
pressing the upper part of the power switch,
power is ON. Pressing the lower part turns OFF the
power.
Master Volume of
Press VOL +/-
on
speakers
the remote control
on
the sub woofer to increase
level of
or
or
VOLUME +/-
decrease the sound
speakers.
Press MUTE to mute sound of your
speakers.
Sound Level of subwoofer
Press LEVEL +/-
on
the
remote control increase or
decrease the sound level of subwoofer.
In addition,
adjust
the volume to
enjoy
more
powerful
sound.
Source of subwoofer
Press INPUT
TUNER
auxiliary
12
or
on
AUX
the remote control
on
channel.
or press DVD,
the sub woofe to select an
Presetting
You
can
the Radio Stations
Listening
preset 50 stations for FM and AM. Before
make
Press FM/AM to select the
1.
that you have turned down the
volume to the minimum.
tuning,
to the Radio
frequency (AM
or
FM)
you want.
Every time you press this button, AM and FM
sure
changes alternately.
1.
Press FM/AM to select the
frequency (AM
or
The last received station is tuned in.
FM)
you want.
Every time you press this button, AM and FM
Press PRESET
2.
-
2.
Select
station you want
TUNING (-)/(+) buttons.
a
Tuning
-
in
(-)/(+) repeatedly
preset station you
changes alternately.
automatically
(-)/(+) for
Press TUNING
by pressing
Each time you press the button, the unit tunes in
preset station at a time.
one
3.
more
to select the
want.
Adjust
than 0.5 second.
Scanning stops when the unit tunes in a stations.
Tuning in manually
Press TUNING (-)/(+) briefly and repeatedly.
-
by pressing VOL (-)/(+)
repeatedly.
the volume
remote control
To listen to
non-preset radio stations
or automatic tuning in step
Use manual
?
on
the
2 on
left.
3.
Press MEMORY/ SET/ CLEAR
A
preset number will flash in the
on
the sub woofer.
display
For automatic
?
window.
on
the front
tuning,
panel.
press and hold TUNING
(-)/(+)
To turn off the radio
4.
Press PRESET
(-)/(+)
to select the
preset number
you want.
5.
Press POWER
or
Press MEMORY/ SET/ CLEAR
again.
?
Press ST/MN
Repeat steps
1
(or 2)
to 5 to store other
so
noisy
that "STEREO"
display window. There will
the reception will improve.
stations.
the unit off
STANDBY/ON) to turn
(DVD).
For your reference
If an FM program is
The station is stored.
6.
(
select another function mode
be
no
disappears
stereo
in the
effect, but
Press ST/MN
again
to
restore the stereo effect.
To delete all the memorized stations
?
Press and hold MEMORY/ SET/ CLEAR
on
the front
panel for about two seconds, "CLEAR" appears in the
display window and then press CLEAR again, the
stations
are
deleted.
preset number will flash. To
the preset number, follow the steps 4-5.
moment and then a
To recall
?
Use ST/MN function to switch to
stereo
?
When
Press and hold PRESET
or
(-)/(+)
until the desired
press it
repeatedly.
mono reception
reception is distorted by noise.
recording the MW(AM) broadcast, beat
noises may
Sound
presets
preset number appears
antennas.
Notes:
For your reference
If all stations have already been entered, FULL
message will appear in the display window for a
change
To improve reception
Reposition the supplied
?You
If it does, press ST/MN
once.
Quality Adjustment
can
using
occur.
if
choose between 4 fixed sound
the EQ button
on
FLAT
linear
ROCK
more
impressions
the remote control.
frequency
response
POP
bass, more treble
less bass, less treble
CLASSIC
for orchestral music
MUTE
Press MUTE to
temporarily stop
the sound such
as
when you answer the telephone. The MUTE indicator
flashes in the display window.
13
Audio Connection to
Connect the DVD
player
Optional Equipment
to your
optional equipment
for audio output.
Rear of DVD
Amplifier equipped with 2-channel analog stereo
or Dolby Pro Logic ll / Pro Logic: Connect the left
and right AUDIO OUT jacks on the DVD player to the
audio left and right IN jacks on your amplifier, receiver,
or stereo system, using the audio cables (A).
Amplifier equipped with 2-channel digital stereo
(PCM) or audio / video receiver equipped with a
multi-channel decoder (Dolby DigitalTM, MPEG 2,
or DTS): Connect one of the DVD Player's DIGITAL
AUDIO OUT jacks (OPTICAL O or COAXIAL X) to the
corresponding in jack on your amplifier. Use an
optional digital (optical O or coaxial X) audio cable.
player
Digital Multi-channel
digital multi-channel
sound quality. For this
A
/ video receiver that
formats
O
X
A
sound
connection
provides
you need
multi-channel audio
supports
supported by
a
one or more
your DVD
player
the best
of the audio
such
as
MPEG
2, Dolby Digital and DTS. Check the receiver manual
and the
logos
on
the front of the receiver.
Notes:
?
If the audio format of the
match the
OPTICAL
produces
COAXIAL
DIGITAL INPUT
AUDIO INPUT
?
Amplifier (Receiver)
a
does not
Six Channel
Digital Surround Sound via a digital
only be obtained if your receiver
equipped with a Digital Multi-channel decoder.
connection
?To
see
can
is
the audio format of the current DVD in the
on-screen
14
digital output
of your receiver, the receiver
strong, distorted sound or no sound at all.
capabilities
display,
press AUDIO.
On-Screen
You
can
the
use
general playback status on the TV
can be changed using the menu.
on-screen display:
display
the
Some items
screen.
To
Display
Press DISPLAY
1.
The selected item is
Press b / B to
3.
an
item.
inputting
change
the title
Chapter
the
setting. You can
appropriate (e.g.
number).
For
press ENTER to execute the
some
also
functions,
setting.
?
Some discs may not
shown below.
If
no
provide
pressed for 10 seconds,
display disappears.
Repeat
title
A-B
Repeat
sequence
#1:1/9
Enter
Marker
the
0:20:09
language
Digital Audio
Output mode
b/Bor
AUDIO
ABC
1 ENG
Resume
Action
play
from this
prohibited
or
b/Bor
SUBTITLE
InstaliodSeup
b/Bor
1/3
ANGLE
3D SUR
b/B
Example: On-Screen Display during
playing VCD
Marker Search
123456789
B, Numbers
Numbers, ENTER
and
Selection Method
Items
a
b /
Audio
Sound
B, Numbers
ENTER
Time search
Angle
Playback Status/Restrictions
Title
1/12
all of the features
button is
on-screen
b /
ENTER
Number
Subtitle language
Notes:
?
1/3
highlighted.
the number buttons if
use
Selection Method
Items
Title Number
during playback.
Press v / V to select
2.
Example: On-Screen Display during
playing DVD Video
menu
point
not available
Track Number
(or PBC mode)
Time search
1/3
B, Numbers
ENTER
0:20:09
Numbers
ENTER
b/Bor
Audio Channel
Sound
b /
AUDIO
3D SUR
b/B
15
Initial
LANGUAGE
Settings
LANGUAGE
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 16 to 19.
To
display
the
Menu
Language
a
To go back to the
display.
on
previous
level:
the remote control.
Operation
2.
Use v / V to select the desired
move
alternate
menu
appears.
option
the selected item,
move
as
well
as
option
then
to the third level.
additional steps.
Press SETUP, RETURN,
menu.
Original:
Refers to the
disc
recorded.
was
Setup
menu
and
or
on-screen
DVD
original language
Other: To select another
PLAY to exit the
Setup
track
in which the
language, press number
corresponding 4digit number according to the language code list in the
reference chapter. If you enter the wrong language
code, press CLEAR.
Use v / V to select the desired setting then press
ENTER to confirm your selection. Some items
require
for the
buttons then ENTER to enter the
Use v / V to select the second desired
press B to
5.
Setup
setting for
setting(s).
language
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
then press
to the second level. The screen shows
the current
Select
Select the
Press SETUP. The
4.
Original
Disc Audio / Subtitle / Menu
1.
3.
Off
Disc Menu
Move
Select
B to
Disc Subtitle
screen.
To go to the next level:
Press B on the remote control.
General
Original
A second press of
menu.
SETUP will take you back to initial
Press b
English
Language
Disc Audio
and exit the Menu:
display
Press SETUP to
16
Menu
DISPLAY
Notes:
At this
DISPLAY
TV
16:9
Aspect
Mode
Display
Progressive
Off
Move
TV
a
16:9: Select when
Display
Display
Mode
Mode
standard 4:3 TV is connected.
5.
16:9 wide TV is connected.
a
Pressing
DVD
works
setting
Component
unit
when the TV
only
Aspect
upper and
Panscan:
Automatically displays
the wide
picture
and cuts off the
portions
that do not
bands
on
the
on
fit.
Progressive Scan
highlight
Enter.
ENTER will set the
player
to
Progressive
InstaliodSeup
Once the
setting for progressive scan output is
image will only be visible on a progressive
compatible TV or monitor. If you set Progressive
entered,
scan
screen
is
Caution:
Displays a wide picture with
lower portions of the screen.
the entire
displaying
goes to a black screen, your
may not be compatible to
mode.
scan
mode is set to "4:3".
Letterbox:
video
4. When the confirm menu appears on your screen
Cancel is highlighted as default. Use the b / B
buttons to
4:3: Select when
only
screen
Select
DVD
Aspect
the
television/display
progressive scan.
In this case the player will time out after 10-12
seconds if no other keys are pressed. After the
times out, the player will automatically return to
standard format, and your picture will return.
Widescreen
Scan
point
video. If your
an
Scan to On in error, you must reset the unit. First,
remove the disc in the DVD Player. Next, press STOP
( x ) again and hold it for five seconds before
releasing it. The video output will be restored to the
standard setting, and a picture will once again be
visible on a conventional analog TV or monitor.
DVD
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with
a progressive scan signal, set Progressive Scan to
AUDIO
Each DVD disc has
Set the
a variety of audio output options.
player's AUDIO options according to the type
of audio system you
use.
On.
To Turn ON
progressive
scan:
AUDIO
Connect component out of the DVD to the
your monitor/television, set your television
to
input
or
of
monitor
Component Input.
1. Select
"Progressive Scan"
on
the DISPLAY
menu
Dolby Digital
Bitstream
DTS
Bitstream
MPEG
PCM
Sample Freq.
48 kHz
DRC
On
Vocal
On
then press B.
DISPLAY
Move
TV
Select
Aspect
Display
Mode
Progressive
Scan
On
Off
Prev.
2. Select "On"
using
Move
Enter
the v / V buttons.
3. Press ENTER to confirm your selection.
The confirm menu will appear.
17
Dolby Digital
/ DTS / MPEG
OTHERS
DVD
Bitstream: Select "Bitstream" if you connect the
DVD Player's DIGITAL OUT jack to an amplifier or
other
equipment
with
Dolby Digital, DTS
a
The PBC, Auto
and B.L.E.
Play
settings
can
be
changed.
or
OTHERS
MPEG decoder.
PBC
MPEG): Select when
connected to a two-channel digital stereo amplifier.
DVDs encoded in Dolby Digital or MPEG will be
automatically downmixed to two-channel PCM
PCM
(for Dolby Digital
/
Auto
On
Off
Play
B.L.E.
On
audio.
Off
not
(for DTS): If you select "Off", the DTS signal is
output through the DIGITAL OUT jack.
PBC
Sample Freq. (Frequency)
Set
DVD
If your receiver or amplifier is NOT capable of
96 kHz signals, select 48 kHz. When this
handling
choice is made, this unit automatically converts any
96 kHz signals to 48 kHz so your system can decode
them.
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz. When this choice is made,
this unit passes each type of
any further processing.
signal through
without
Playback Control (PBC)
amplifier
to
verify
On:V ideo CDs with PBC
(DRC)
DVD
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
Off:V ideo CDs with PBC
way
Auto
You
as
Play
can
If Auto
Play
play
DVD
player will
longest playback time and
automatically.
On: Auto
Play
function is active.
Off: Auto
Play
function is not active.
Play
function may not work for
Notes:
The Auto
On:
multi-channel karaoke DVD is
The karaoke channels
normal stereo sound.
(Black
on
the disc mix into
Level
Expansion)
and monitor's
Expanded
DVDs.
VCD
playback pictures. Set
ability.
grey scale.
Off: Standard grey scale.
some
DVD
(0
(7.5
IRE cut
off)
IRE cut
off)
Note:
The B.L.E. function works NTSC system
18
same
mode is set to On, this DVD
back the title
preference
playing.
the
set up the DVD Player so a DVD disc
starts playing whenever the DVD is
To select the black level of
a
played
automatically
effect.
when
are
to
DVD
B.L.E.
only
played according
Audio CDs.
This allows you to listen to a movie at a lower volume
losing clarity of sound. Set DRC to On for this
without
Set to On
are
search for title that has the
With the DVD format, you can hear a program's
soundtrack in the most accurate and realistic
Vocal
to On or Off.
the PBC.
then
Control
VCD
inserted.
Check the documentation for your
its capabilities.
Dynamic Range
Select
Move
only.
your
LOCK (Parental
4. Press ENTER to confirm your rating
press SETUP to exit the menu.
Control)
selection, then
LOCK
Password
Rating
Unlock
Password
New
Country
Code
You
can
(Security Code)
enter or
change password.
US
1. Select Password on the LOCK menu then press B.
2. Follow
step
"New" is
Move
Input
DVD
Some movies contain
that may not be suitable
of these discs contain
scenes
for children to view.
Many
parental control information that applies to the
complete disc or to certain scenes on the disc. Movies
and scenes are rated from 1 to 8, depending on the
country. Some discs offer
more
suitable
scenes as an
parental
access
If you
2.
control feature allows you to block
"Rating"
on
the LOCK
menu
then
Input a 4-digit code and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press CLEAR.
Rating
Press SETUP to
rating
1-8:
from 1 to 8
using
then press ENTER.
Input
the
the
can
Setup
clear it
using
menu.
number "210499" and the
6-digit
InstaliodSeup
Code
display
a new
Country
Code
code
as
security
the v / V buttons.
described above.
DVD
Enter the code of the
Rating, Password and Country Code
features, you must input the 4-digit security code
you created. If you have not yet entered a security
code you are prompted to do so.
2. To access the
a
4-digit code,
verify.
to
forget your Security
Enter
3.
press B.
3. Select
new
again
code is cleared.
rating you input, thereby
from being able to view
your children
material you believe is unsuitable.
1. Select
it
If you forget your security code you
the following steps:
to scenes below the
preventing
or
4. Press SETUP to exit the menu.
1.
alternative.
The
(Rating). "Change"
Select
3. Enter the
Rating
2 as shown left
highlighted.
country/area
whose standards
used to rate the DVD video disc, based
list in the reference chapter.
were
1.
Select
"Country Code"
on
the LOCK
on
menu
the
then
press B.
2.
Follow step 2
3.
Select the first character
4.
Shift the
as
cursor
shown left
(Rating).
using
v / V buttons.
using B button and select
using v / V buttons.
the
second character
Rating one (1) has the most
rating eight (8) is the least
restrictions and
5.
restrictive.
Press ENTER to confirm your country code
selection.
Unlock
If you select unlock, parental control is not active
and the disc plays in full.
Notes:
If you set
the same
scenes
rating for the player, all disc scenes with
rating or lower are played. Higher rated
are not played unless an alternate scene is
available
a
on
the disc. The alternative must have the
rating or a lower one. If no suitable alternative
found, playback stops. You must enter the 4-digit
password or change the rating level in order to play
same
is
the disc.
19
Operation
Playing
DVD
a
or
Video CD
General Features
Note:
Unless stated otherwise, all
Playback Setup
Turn
1.
on
the TV and select the video
connected to the DVD
Turn
2.
the
on
input
source
player.
the audio system (if applicable) and select
source connected to the DVD player.
input
Press OPEN/CLOSE to open the disc tray and
load your chosen disc in the tray, with the
3.
playback
side down.
Press OPEN/CLOSE to close the tray. Playback
starts automatically. If playback does not start,
4.
press PLAY.
In
Moving
to another TITLE
When
disc has
a
the disc
menu
might
Use the bBvVbuttons to select the
title/chapter
you want to view, then press ENTER to start.
Press TITLE or DVD MENU to return to the menu
stopped
B to
You
menu screen.
Off
"PBC"
(See
operating
may differ. Follow the instructions on
You also may set PBC to
the each
on
page
can
?
a
another
DVDs may have a region code. Your player does
not play discs that have a region code different from
4
The
region
code for this
playback
(0-9) or
number
use b
/
to another title.
player
on a
more
disc has
than
its number while
Press SKIP .
more
than
track, you
one
chapter/track
beginning
?
one
chapter
can move
or a
to
follows:
as
>
briefly during playback
chapter/track or to return to the
the current chapter/track.
or
to
of
Press SKIP . twice
briefly
to
step back
to the
previous chapter/track.
?To go
to any chapter during DVD playback,
DISPLAY
and press v / V to select the
press
chapter/track icon. Then, input the chapter/track
directly
numberoruseb/B.
Search
1.
Press SCAN
2.
Press SCAN
is
3.
(m
or
M) during playback.
(m
required speed.
or
M) repeatedly
DVD; X2, X4, X16
or
Video CD; X2, X4
or
to select the
X100
X8
To exit SEARCH mode, press PLAY.
Changing
the Audio Channel
Press AUDIO
repeatedly during playback to hear
(Stereo, Left, or Right).
different audio channel
20
to
can move
select the next
18).
parental control is set and the disc is not within
the rating settings you must input the password.
(See "Lock Menu" on page 19.)
player.
(four).
use
is
title
If
your
appropriate
play any title by inputting
is stopped.
disc has
Notes:
?
title, you
When
Use the number buttons to select the track you
and
one
to another CHAPTER/TRACK
want to view and press RETURN to return to the
settings
than
Moving
?
procedures
then the
move
screen.
Menu
described
appear
instead:
menu screen.
more
another title. Press DISPLAY while
playback
some cases,
operations
the remote control. Some features may also be
available on the Setup menu.
a
Still Picture and
Frame-by-Frame Playback
Repeat
You
1.
2.
Press PAUSE/STEP
?
?
player
will
(X) during playback.
now
Use the SCAN
(m
or
M)
to select the
?
required
?
t 1/16, t 1/8, t 1/4,
speed:
(backward),
(forward).
t 1/2
or
T 1/16, T 1/8, T 1/4,
or
T 1/2
or
?
-
Repeat Chapter/Title/Off
chapter.
the current
:
does not
Track
All
play repeatedly.
Repeat
Track/All/Off
repeats the current track
repeats all the tracks on a disc.
:
Off
-
:
:
does not
play repeatedly.
a
Video CD with PBC, you must set PBC to Off
use the repeat function (See
the setup menu to
"PBC" on page 18).
If you press SKIP
(>) once during Repeat
Chapter (Track) playback, the repeat playback
(N).
Note:
cancels.
Slow motion
playback
in
reverse
is not
possible
with
Video CDs.
3D Surround
To
Random
produce
a
3D surround effect that simulates multi-
channel audio from two stereo
Press RANDOM
on
again
the TV
speakers (instead of
speakers normally required for multi-channel
from a home theater system).
the five+
Press RANDOM during playback. The unit
automatically begins random playback and
RANDOM appears
2.
Off
On
?
To exit Slow Motion mode, press PLAY
to select a desired
Title: repeats the current title.
on
a Video CD, the Slow speed changes: T
1/16, T 1/8, T 1/4 or T 1/2 (forward).
1.
disc.
Notes:
With
3.
Chapter: repeats
Video CDs
go into PAUSE mode.
?
2.
during playback
DVD Video Discs
Slow Motion
The DVD
on a
repeat mode.
To exit still motion mode, press PLAY.
Press PAUSE/STEP
title/chapter/all/track
a
Press REPEAT
?
1.
play
can
the remote control
during
playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly.
on
audio
screen.
to normal.
1.
Press DISPLAY
2.
Use v or V to select the sound
The sound
Tip:
By pressing SKIP
>
during random playback, the
(track) and resumes random
3.
during playback.
option
will be
option.
highlighted.
UseborBtotoselect"3DSUR".
To turn off the 3D Surround effect, select "Normal".
unit selects another title
playback.
Time Search
Note:
On
Video CD with PBC, You must set PBC to Off
a
the setup menu to use the random function
"PBC" on page 18).
Repeat
2.
a
sequence.
again
B" appears
Press A-B
again
"
A
the TV
Press DISPLAY
during playback. The
elapsed playing time.
and the
time search
Press v / V to select the time clock icon and "-:--:appears.
Input
the
required
start time in
seconds from left to
right.
hours, minutes, and
If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
point.
screen
at any chosen time on the disc:
"
-
screen.
at your chosen end
briefly on
repeat sequence begins.
3.
3.
starting point.
playing
box shows the
-"
Press A-B
-
To start
2.
Press A-B at your chosen
appears briefly on the TV
"A
on
1.
A-B
To repeat
1.
(See
4.
Press ENTER to confirm.
Playback
starts from the
selected time.
to cancel.
21
Zoom
Use
to
zoom
enlarge
Press ZOOM
1.
the video
image.
during playback
or
still
playback
to
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
screen
DVD Features
Checking
the contents of DVD discs: Menus
DVDs may offer menus that allow you to access
special features. To use the disc menu, press DVD
MENU.
Each press of the ZOOM button changes the TV
in the sequence: 400% size
1600% size
2.
Special
Input
the
B v V buttons to
corresponding
highlight your
number
or use
the b
selection. Then press
ENTER.
→
normal size
→
Title Menu
Use the bBvVbuttons to
3.
zoomed
4.
To
move
the
through
Press TITLE. If the current title has
1.
picture.
resume
normal
playback,
repeatedly.
CLEAR button
press ZOOM
or
2.
on some
DVDs.
3.
Marker Search
To enter
You
start
can
To enter
points.
point
the TV
screen
subtitle
a menu,
the
Otherwise, the disc
offers features such
menu
angles,
as camera
options,
and
Press TITLE to exit.
Press DVD MENU and the disc
from up to nine memorized
marker, press MARKER at the
playback
desired
may appear.
screen.
Disc Menu
Marker
a
menu
spoken language and
chapters for the title.
Note:
Zoom may not work
appears
The
on
the
menu
a
on
the disc. The Marker icon appears
to enter up to nine
Press DVD MENU
on
Camera
briefly. Repeat
menu
is
displayed.
to exit.
Angle
If the disc contains
markers.
again
scenes
recorded at different
angles, you can change to a different camera
angle during playback. Press ANGLE repeatedly
during playback to select a desired angle. Note that
the number of the current angle appears on the
display.
camera
To Recall
or
1.
During
disc
search
menu
2.
3.
Clear
a
Marked Scene
playback,
appears
press SEARCH. The marker
on the screen.
Within 10 seconds, press b / B to select
number that you want to recall or clear.
Press ENTER and
marked
scene.
playback
a
marker
starts from the
Or, Press CLEAR and the marker
Tip:
The
angle
scenes
indicator will blink
recorded at different
angle switching
is
on
the TV
angles
screen
as an
during
indication that
possible.
number is erased from the list.
4.
You
on
any marker by
the marker search menu.
can
play
inputting
its number
Changing
the Audio
Press AUDIO
different audio
Language
repeatedly during playback
language or audio track.
to hear a
With DVD-RW discs recorded in VR mode that have
both
a
main and
Bilingual audio channel, you can
(L), Bilingual (R), or a mix of
Bilingual) by pressing AUDIO.
a
switch between Main
both
(Main
+
Subtitles
Press SUBTITLE
repeatedly during playback
languages.
the different subtitle
22
to see
Playing
an
Audio CD
or
MP3/WMA Disc
MP3 / WMA disc
limited
The DVD
player can play MP3/WMA formatted
recordings on CD-ROM, CD-R, or CD-RW discs.
?
with this
player
is
Sampling frequency: within 8 48 kHz (MP3),
48kHz (WMA)
Bit rate: within 32 320kbps (MP3),
40
192kbps (WMA)
The player cannot read an MP3/WMA file that has
a file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
-
within 22
?
compatibility
follows:
as
-
-
-
Audio CD
?
Once you insert an audio CD a menu appears on the
TV screen. Press v / V to select a track then press
PLAY or ENTER and playback starts.
?
?
AUDIO CD
0:00:00
1/12
List
Program
Track1
Track2
creates an ISO 9660 file
Track3
system.
Track4
?
Track5
File
names
should have
a
maximum of 8 letters
Track6
and must
Track7
Track8
?
They
.mp3 or .wma extension.
contain special letters such as /
incorporate
should not
an
?*:"<>letc.
?
MP3 / WMA
1.
Press v / V to select
a
folder, and press ENTER
Press v / V to select a track then press PLAY
ENTER. Playback starts.
or
MUSIC
0:00:00
the disc should be
player requires
discs and
recordings
to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files) and
1/104
Program
List
on
less than 999.
This DVD
to see the folder contents.
2.
The total number of files
these
require certain pre-existing conditions (see
above) to ensure compatible playback.
1-Music1
2-Music2
3-Music3
4-Music4
Operation
5-Music5
Customers should note that
6-Music6
7-Music7
required
permission
is
in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
Note:
should
Displays path
of track from the disc
on
the TV
screen.
always
be
sought
from the
copyright
owner.
Tip:
?
If you
are
in
a
file list
on
the MP3/WMA
want to return to the Folder
highlight
?
list,
use
menu
and
the v / V to
and press ENTER.
PressandholdV/vtogotothenext/previous
page.
?
On
a CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MP3/WMA
or
JPEG word
on
top of the
menu
is
highlighted.
23
Audio CD and MP3 / WMA Disc
Random
Features
1.
Press RANDOM
during playback. Random
Playback begins immediately and RANDOM
appears
Pause
2.
1.
Press PAUSE/STEP
2.
To return to
on
menu screen.
To return to normal
repeatedly
during playback.
the
playback, press RANDOM
disappears from the
until RANDOM
menu screen.
press
playback, press PLAY,
PAUSE/STEP again.
ENTER
or
Tip:
By pressing SKIP
Moving
to another Track
Press SKIP
1.
(.
>) briefly during playback
track or to return to the beginning
Press SKIP . twice
3.
previous
track.
You
play
can
random
during
playback,
resumes
the
random
playback.
or
to go to the next
of the current track.
2.
>
unit selects another track and
to go back to the
briefly
Repeat
1.
A-B
To repeat a sequence during disc playback press
A-B at your chosen starting point. The Repeat icon
and "A" appear
any track
by inputting
its number.
2.
on
the
menu screen.
Press A-B
again at your chosen end point. The
icon and "A-B" appear on the menu
screen, and the sequence begins to play
Repeat
Repeat
You
1.
can
Track/All/Off
play
a
track/all
on a
Press REPEAT when
repeatedly.
disc.
playing
a
disc. The repeat
3.
icon appears.
To exit the sequence and return to normal play,
press A-B again. The Repeat icon disappears from
the
2.
Press REPEAT to select
?
?
?
a
Track: repeats the current track
repeats all the tracks on a disc.
All:
Off(No display):
does not
menu screen.
desired repeat mode.
play repeatedly.
3D Surround
To
produce
a
3D surround effect that simulates multi-
channel audio from two stereo
speakers (instead of
speakers normally required for multi-channel
from a home theater system).
Note:
the five+
If you press SKIP (>) once during Repeat Track
playback, the repeat playback cancels.
audio
1.
Press AUDIO
during playback.
"3D SUR" appears
2.
Search
24
1.
Press SCAN
2.
Press SCAN
3.
To exit SEARCH mode, press PLAY.
(m
or
M) during playback.
(m or M)repeatedly to select the
required speed: X2, X4, X8 backward or forward.
To return to normal
repeatedly
on
the
playback, press AUDIO
disappears from the
until "3D SUR"
menu screen.
menu screen.
1.
Insert
a
(Audio CD)
999
or
stops after all of the tracks
have
You
1.
MP3/WMA
menu
can
appears
as
below.
2.
1/12
0:00:00
List
Program
1/104
?
Program
List
Track1
Track8
Track2
Track3
1-Music1
Music16
Track3
Track12
2-Music2
Music8
Music5
Track4
Track7
3-Music3
Music9
Track5
Track6
4-Music4
Music1
Track6
Track9
5-Music5
Music7
Track7
Track10
6-Music6
Music6
Track8
Track1
7-Music7
Music3
Audio CD Menu
?
list
Tracks
title/chapter/all/track
playing
a
on a
disc.
disc. The repeat
a
desired repeat mode.
Track: repeats the current track
repeats all the tracks on programmed list.
Off(No display):
does not
play repeatedly.
Note:
If you press SKIP (>) once during Repeat Track
playback, the repeat playback cancels.
playback
is
1.
The program menu appears. Press
RETURN to exit the menu.
stopped.
2.
Video CD with PBC, you must set PBC to Off
the setup menu to use the
(See "PBC" on page 18).
on
programmed playback
"
list.
Repeat
Track2
Track3
Track3
Track4
Track4
Track1
"
Program
Program
Track2
Program
List
"
Press CLEAR. Or, select
icon then Press
ENTER to place the selected track on the Program
Select
1/4
Track1
Track from
Use vVbBto select the track that you wish to
from the Program list.
Erasing
VIDEO CD
List
a
erase
Note:
0:11:07
a
Program
All:
Erasing
a
play
the
on
MP3/WMA Menu
Video CD: Press PROGRAM while
On
in
once.
Press REPEAT to select
MUSIC
0:00:00
played
Press REPEAT when
?
AUDIO CD
Playback begins
icon appears.
Audio CD and MP3/WMA Discs:
or
ENTER to start.
Repeat Programmed
disc.
Audio CD
or
the order in which you programmed the tracks and
"PROG." appears on the display window. Playback
The program function enables you to store your
favorite tracks from any disc in the player memory. A
program can contain 99 tracks
tracks (MP3/WMA).
Press PLAY
5.
Programmed Playback
the
to erase additional tracks on the list.
Complete Program
Operation
List
", then press ENTER. The
for the disc is erased.
complete
Note:
The programs
removed.
are
also cleared when the disc is
Video CD Menu
2.
Select
3.
Press PROGRAM. Or, select
icon then
ENTER to place the selected track on the Program
track
on
the List.
"
list.
Repeat
You
can
""
4.
a
to
place
"
additional tracks
on
the list.
add all tracks in the disc. Select
icon then press ENTER.
Select the track you want to start playing on the
Program list. Press and hold v / V to move to the
next /
previous
page.
25
Viewing
a
JPEG Disc
Moving
Using this DVD Player you can view Kodak PICTURE
CDs and discs with JPEG files.
1.
Insert
disc and close the tray. The PHOTO
on the TV screen.
a
appears
menu
JPEG
to another File
Press SKIP
(. or >) or cursor (v or V) once
viewing a picture to advance to the next or
previous file.
while
Zoom
JPEG
Use
zoom
(see
22
to enlarge
page)
PHOTO
List
Preview
JPEG Folder 1
the
photo image.
JPEG Folder 2
II
JPEG Folder 3
To rotate
JPEG Folder 4
JPEG Folder 5
picture
JPEG Folder 6
Press b / B
JPEG Folder 7
during showing
JPEG Folder 8
picture
clockwise
or
To listen to MP3 music
2.
Press v / V to select
a
folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the previous Folder
list,
use
the v / V buttons
the remote to
Slide Show starts from the selected file if
While
to the
or
PLAY.
Speed
is not Off.
viewing a file, you can press STOP
previous menu (PHOTO menu).
?
listering
to MP3 music files
disc.
containing
the two types of file in
player.
display PHOTO
3.
Press v / V to select
4.
Use B to select
Playback
STOP is
starts. The
a
photo
menu.
file.
icon then press ENTER.
playback will continue until
pressed.
Tip:
PressandholdV/vtogotothenext/previous
There
you
can
listen
picture are included in the same disc,
only MP3 music during watching
picture.
four Slide
: >>> (Fast),
Speed options
>> (Normal), > (Slow) and II (Off).
Use vVbBto highlight the Speed. Then, use b /
B to select the option you want to use then press
are
JPEG disc
limited
?
with this
player
is
Depending
upon the size and number of JPEG
a long time for the DVD player
to read the disc's contents. If you don't see an on-
a disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MP3/WMA
JPEG word
on
top of the
menu
is
screen
highlighted.
after several minutes,
some
of the
---
2048
?
JPEG
display
files may be too large
reduce the resolution of
the JPEG files to less than 5M pixels as 2760 x
Press RETURN, information of file is hidden.
Slide Show
compatibility
follows:
as
files, it could take
On
or
same
JPEG
watching picture
files while
Press TITLE to
ENTER.
?
to rotate the
picture
When MP3 and
page.
?
the
on
2.
to move
Tip:
?
display
Insert the disc
1.
the
If you want to view a particular file, press
v / V to highlight a file and press ENTER
option
can
recorded
and press ENTER.
highlight
3.
on
You
a
counter clockwise.
pixels
and burn another disc.
The total number of files and folders
on
the disc
should be less than 999.
Use vVbBto
press ENTER.
Still Picture
highlight
the
(Slide Show)
then
?
Some discs may be incompatible due to a
recording format or the condition of disc.
different
JPEG
?
Ensure that all the selected files have the
extensions when
1.
Press PAUSE/STEP
The
2.
player
will
now
during
slide show.
?
go into PAUSE mode.
To return to the slide show, press PLAY
PAUSE/STEP again.
or
If the files have
rename
press
?
File
them
names
are
Windows
26
into the CD
".jpg"
layout.
".jpe" or ".jpeg" extensions, please
".jpg" file.
as
without
able to be read
the files
copying
by
shown
Explorer.
".jpg"
extension will not be
this DVD
as
JPEG
player.
image
Even
though
files in
DVD VR format Disc
Playing
a
This unit will
play
DVD-R/RW discs recorded
Maintenance and Service
using
using
the DVD-Video format that have been finalized
a
?
This unit will
Insert
menu
play DVD-RW discs recorded using
Recording (VR) format.
disc and close the tray. The TITLE LIST
appears on the TV screen.
a
When
shipping
Please
?
save
?
Press v / V to select
ENTER and
a
playback
track then press PLAY
or
Do not
use
near
packing
volatile
liquids
such
as
insecticide
the unit.
or plastic products in contact
long period of time. since they
Do not leave rubber
with the unit for
a
leave marks
the surface.
on
the unit
player, use a soft, dry cloth. If the
extremely dirty, use a soft cloth lightly
with a mild detergent solution.
To clean the
played
in
player.
surfaces
Do not
DVD RECORDER.
or
kinds of discs and
are made with CPRM data by
Player does not support these
display the "CHECK DISC".
What is 'CPRM'?
CPRM is
protection system (with scramble
system) only allowing the recording of 'copy once'
a
copy
broadcast programs. CPRM stands for Content
Protection for Recordable Media.
player
is CPRM
compatible,
which
means
that
record copy-once broadcast programs, but
you cannot then make a copy of those recordings.
CPRM recordings can only be made on DVD-RW
can
discs formatted in VR mode, and CPRM recordings
can only be played on players that are specifically
compatible
are
moistened
Some DVD-VR disc
This
carton and
the exterior surfaces clean
Cleaning
Unfinalized DVD-R/RW discs cannot be
you
original shipping
starts.
Note:
this
the
the unit
factory.
spray
?
before
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
Keeping
?
chapter
service technician.
the Unit
Handling
at the
2.
a
DVD-recorder.
the Video
1.
Refer to the information in this
contacting
use
thinner,
strong solvents such
as
these
as
might damage
alcohol, benzine,
Operation
the surface of the
unit.
Maintaining
the Unit
The DVD
player is a high-tech, precision device.
optical pick-up lens and disc drive parts are dirty
worn, the picture quality could be diminished.
If the
or
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
For details,
please
use.
contact your nearest authorized
service center.
with CPRM.
27
Additional Features
Last Scene
This
player
Memory
memorizes last
even
if you
off the
remove
player.
scene
from the last disc
remains in memory
the disc from the player or switch
that is viewed. The last
scene
If you load
scene is
memorized, the
disc that has the
a
automatically
scene
recalled.
Note:
This
player
does not memorize the
you switch off the
the disc.
player
before
scene
of
commencing
a
disc if
to
play
Screen Saver
The
appears when you leave the DVD
mode for about five minutes. If the
screen saver
player
in
Stop
Screen Saver is
displayed
Player automatically turns
for five minutes, the DVD
itself off.
System Select
You must select the
appropriate system mode for your
system. If NO DISC appears in the display
window, press and hold PAUSE/STEP for more than 5
seconds to be able to select a system (PAL, NTSC, or
TV
AUTO).
28
Reference
Language Codes
Use this list to
input your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
following
initial
settings:
Language
Code
7678
Language
Singhalese
Code
7074
Language
Lingala
Code
6566
Language
Fiji
Code
Abkhazian
Afar
6565
Finnish
7073
Lithuanian
7684
Slovak
8375
Afrikaans
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
Ameharic
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Ta tar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volap k
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
Country
Choose
a
8373
8471
8479
Codes
country code from this list.
Country
Afghanistan
Argentina
Code
Code
Country
Malaysia
Code
ET
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
Country
Code
AR
Country
Ethiopia
Fiji
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
HU
AF
SG
SK
Chile
CL
Hong Kong
Hungary
Switzerland
CH
CN
India
IN
Nigeria
Norway
NG
China
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
UG
Croatia
HR
Jamaica
JM
Ukraine
UA
CZ
JP
PH
United States
US
DK
Japan
Kenya
Paraguay
Philippines
PY
Czech Republic
Denmark
KE
Poland
PL
Uruguay
UY
Ecuador
EC
Kuwait
KW
Portugal
PT
Uzbekistan
UZ
Egypt
EG
LY
Romania
RO
Vietnam
VN
El Salvador
SV
Libya
Luxembourg
LU
Russian Federation
RU
Zimbabwe
ZW
TR
29
Troubleshooting
Possible Cause
Symptom
No power.
?
The power is on, but
the DVD player does
not work.
No
picture.
?
The power cord is disconnected.
No disc is inserted.
Correction
?
?
Plug the power
securely.
Insert a disc. (Check that the DVD
audio CD indicator in the display
window is
?
The TV is not set to receive DVD
?
signal output.
?T he video cable is not connected
?
cord into the wall outlet
or
lit.)
Select the appropriate video
mode on the TV.
Connect the video cable
input
securely.
securely.
No sound.
?
The equipment connected with the
audio cable is not set to receive DVD
?
signal output.
?
?
The power of the equipment connected
with the audio cable is turned off.
The AUDIO
wrong
?
Sound level is too low.
?
options
position.
Speaker cords
securely.
not start
player does
playback.
?
?
The remote control
30
properly.
not connected
An
unplayable
are
not connected
?T urn
on the equipment connected with
the audio cable.
?
Set the
Digital Audio Output to the
position, then turn on the DVD
player again by pressing POWER.
correct
?
?
Connect them
Adjuts
disc is inserted.
the VOLUME to
?Connect them
to
?
securely.
higher
correctly,
than 0.
that is L
(left)
L, R (right) to R.
Insert
a
playable
disc.
(Check
the disc
type, color system, and regional code.)
?
does not work
set to the
The volume control is set to 0.
?Speaker cords
correctly.
The DVD
are
are
Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
?
The
rating
level is set.
The remote control is not pointed at
the remote sensor on the DVD player.
The remote control is too far from the
DVD player.
?
Cancel the rating function
the rating level.
or
change
?P oint the remote control at the remote
sensor of the DVD player.
?
Operate
the DVD
the remote control closer to
player.
Specifications
DVD
AUDIO OUT:
player
2.0Vrms(1KHz,0dB),600Ω, RCAjack(L,R)x1
General
Power
requirements: AC
Power
consumption:
110-240 V
,
DIGITAL OUT (COAXIAL):
0.5V(p-p),75Ω,RCAjackx1
50/60 Hz
12W
DIGITAL OUT
3 V
Dimensions
(Approx.):
360x39x242mm(WxHxD)withoutfoot
75
5 % to 90 %
Signal system:
Ω, sync negative, RCA jack
x
1
Mini DIN
4-pin
1
x
Dynamic range:
More than 90 dB
1
x
Speakers
Active subwoofer
Power
Refer to the back
panel of the
20W
1
Way
1
+
20W
-
2
Speaker
Way
2
Speaker
4Ω
8Ω
More than 80 dB
-
40000 Hz
45-180Hz
180
82 dB/W
83 dB/W
(1m)
-
(1m)
20W
-
40W
-
D)
Right Speakers
-
DVD, AUX
x
only)
unit.
50W
H
connectors
(DVD/CD)
Left and
40W
Rated
(ANALOG OUT
Harmonic distortion: Less than 0.008%
(Y) 1.0 V (p-p), 75 Ω,negative sync, RCA jack
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
Sound Pressure Level
ratio:
More than 100 dB
COMPONENT VIDEO OUT:
requirements
Power Output
Power consumption
Inputs
Type
Impedance
Signal-to-noise ratio
Frequency Response
nm
PA L/NTSC
CD:8Hzto20kHz
Signal-to-noise
(Y) 1.0 V (p-p), 75 Ω, negative sync,
(C)0.3V(p-p)75Ω
x
1
Frequency response:
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
S-VIDEO OUT:
Input Power
Max. Input Power
Net Dimensions (W
Net Weight
x
Laser:
VIDEO OUT:
Vp-p
(OPTICAL):
Ω, Optical connector
Semiconductor laser, wavelength 650
Outputs
1
75
System
Weight (Approx.): 1.95 kg
Operating temperature:
5 Cto35 C(41 Fto95 F)
Operating humidity:
(p-p),
240x330x322mm
106x230x106mm
7.4kg
0.8kg+0.8kg
Tuner
FM
108.0 MHz
Tuning Range
87.5
Intermediate
10.7 MHz
Frequency
Signal to Noise Ratio
Frequency Response
AM
-
60/55 dB
150
-
or
65
-
74
MHz, 87.5
-
108.0 MHz
(MONO/ STEREO)
10000 Hz
(MW)
Tuning Range
522-1611kHzor530-1610kHz
Intermediate
450 kHz
Frequency
Signal to Noise Ratio
Frequency Response
32 dB
150
-
1800 Hz
Accessories
Video cable
(1), Audio cable (2), Speaker cable (2),
(1), Batteries (2)
FM Antenna
(1),
AM Antenna
(1),
Remote control
Note:
Design
and
specifications
are
subject
to
change prior
notice.
31
P/NO
:
3834RD0030J
Download PDF

advertising