LG | V9120W | LG V9120W Owner’s Manual

DVD PLAYER/
VIDEO CASSETTE
RECORDER
OWNER'S MANUAL
MODEL
:
V9120W
PAL
Before
adjusting this product,
booklet carefully and
connecting, operating
please read
completely.
this instruction
or
Notes
CAUTION
copyrights:
It is forbidden
RISK OF ELECTRIC SHOCK
DO NOT OPEN
via cable,
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
on
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
law to copy, broadcast, show, broadcast
in public, or rent copyright material without
by
play
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on
some discs. This product incorporates copyright protection
technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of this
copyright
protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disassembly is prohibited.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE
The exclamation mark within
an
equilateral
trian-
gle is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: Do not install this
such
as a
book
case or
equipment
in
a
confined space
WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO
BE DISPLAYED IN THE PICTURE. IN CASE OF 625 PROGRESSIVE SCAN PICTURE
MENDED THAT THE USER SWITCH THE CONNECTION
TO THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET COMPATIBILITY
WITH THIS MODEL
similar unit.
PROBLEMS, IT IS RECOM-
DVD
625p
PLAYER, PLEASE CONTACT
OUR CUSTOMER SERVICE CENTER.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
SERIAL NUMBER: The serial number is found
of this unit. This number is
and retain this
guide
as a
the back
to this unit and not avail-
unique
able to others. You should record
on
requested
information here
permanent record of your pur-
chase.
Model No.
Serial No.
___________________________________
___________________________________
CAUTION:
This
Player employs a Laser System.
To ensure proper use of this product, please read this
owner's manual carefully and retain for future reference,
should the unit require maintenance, contact an authorized
service location-see service procedure.
Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazDigital
Video Disc
ardous
radiation exposure.
To prevent direct exposure to laser
not
try
This unit
as
vases, shall be
placed
on
the
operate both
front
2.
are
helpful
panel
to turn
on
on
this unit.
on
the remote control when
you want to control the DVD.
The DVD indicator will light on the front
display
apparatus.
panel
to show that the DVD is selected.
VCR Button
Press the VCR button
display
4.
or
DVD Button
Press DVD button
3.
in
the remote control
on
the remote control when
you want to control the VCR.
The VCR indicator will light on the front
panel
to show that the VCR is selected.
DVD/VCR Button
Press the DVD/VCR button
toggle
2
this
POWER Button
Press the POWER button
WHEN OPEN AND INTERLOCKS DEFEATED.
such
set of controls to
following buttons
successfully controlling each part.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION
CAUTION: The apparatus shall not be exposed to water,
dripping or splashing and that no objects filled with liquids,
uses one
DVD and VCR. The
to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
controlling
unit
1.
beam, do
notes on
Important
on
the front
panel
control between the DVD and the VCR.
to
Contents
PlayingaDVDorVideoCD...............27-29
Introduction...................4
SymbolUsedinthisManual...............4
AbouttheSymbolDisplay..............4
NotesonDiscs..........................4
HandlingDiscs........................4
StoringDiscs.........................4
CleaningDiscs........................4
TypesofPlayableDiscs...................5
Regionalcode..........................5
Disc-relatedterms.......................6
FrontPanel.............................7
DisplayWindow.........................7
RemoteControl.........................8
RearPanel.............................9
GeneralFeatures.......................27
MovingtoanotherTITLE...............27
.27
Moving to another CHAPTER/TRACK
.
.
.
.
.
Search.............................27
.27
ChangingtheAudioChannel
Still Picture and Frame-by-Frame Playback
.28
SlowMotion.........................28
Random............................28
.
.
.
.
.
.
.
.
.
.
.
.
RepeatA-B..........................28
Repeat.............................28
3DSurround.........................28
TimeSearch.........................28
Zoom..............................29
MarkerSearch.......................29
SpecialDVDFeatures...................29
TitleMenu..........................29
DiscMenu..........................29
InstallationandSetup
.
.
.
.
.
.
.
.
.10
.
CameraAngle.......................29
.29
ChangingtheAudioLanguage
.
Connecting to a TV & Decoder (or Satellite) .10
.11
Connecting to Optional Equipment
.12-16
BeforeOperation-VCRpart.
.12
Tuning in a video channel on your TV
.12
Using your VCR for the very first time
.13
SettingtheclockManually.
Tosetthecoloursystem..............13
.14
Howtousingthemainmenu.
.14
Tuning in TV Stations Automatically
.15
TuninginTVStationsManually.
.16
Changing the order of TV Stations
DeletingTVstations..................16
.17-21
BeforeOperation-DVDpart.
On-ScreenDisplay......................17
InitialSettings.......................18-21
GeneralOperation....................18
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
LANGUAGE.........................18
MenuLanguage....................18
DiscAudio/Subtitle/Menu.
.18
DISPLAY...........................19
.
.
.
.
.
.
.
.
.
.
TVAspect.........................19
DisplayMode......................19
ProgressiveScan...................19
TVOutputSelect....................19
AUDIO.............................20
.20
DolbyDigital/DTS/MPEG.
.20
SampleFreq.(Frequency)
.20
DynamicRangeControl(DRC).
Vocal.............................20
OTHERS...........................21
PBC.............................21
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
AutoPlay..........................21
DivX(R)VOD.......................21
LOCK(ParentalControl)................22
Rating............................22
.22
Password(SecurityCode).
.
.
.
.
.
.
.
.
.
.
.
AreaCode.........................22
.
.
.
.
.
.
.
.
.
Subtitles............................29
.30
PlayinganAudioCDorMP3/WMADisc
.31
AudioCDandMP3/WMADiscFeatures
Pause..............................31
.
.
.
.
.
.
.
.
.
.
.
MovingtoanotherTrack................31
RepeatTrack/All/Off...................31
Search.............................31
Random............................31
RepeatA-B..........................31
3DSurround.........................31
ProgrammedPlayback.....................32
.32
RepeatProgrammedTracks.
.32
ErasingaTrackfromProgramList
.32
Erasing the Complete Program List
ViewingaJPEGDisc......................33
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SlideShow..........................33
StillPicture..........................33
MovingtoanotherFile.................33
Zoom..............................33
Torotatepicture......................33
To listen to MP3/WMA music watching picture
.33
.34
PlayingaDVDVRformatDisc.
.
.
.
.
.
.
.
.
.
.
.
.
.
MaintenanceandService.................34
PlayingaDivXMovieDisc................35
Additional Features-VCR part
.
.
.
.
.
.
.
.
.
.36-37
.
OnScreenDisplay....................36
TapeCounterMemoryStop.............36
Lock(ChildLock).....................36
.36
VideoDoctor(Self-Diagnosis).
Hi-FiStereoSoundSystem.............37
.
.
.
.
.
.
.
.
.
.
AdditionalFeatures.....................38
LastSceneMemory...................38
ScreenSaver........................38
VideoModeSetting...................38
Controlling other TVs with the remote control 38
CopyingfromDVDToVCR...............39
.39
Recording from another video recorder
.
.
.
.
Operation....................23
Reference....................40
Playingatape.......................23-25
.23
CM(CommercialMessage)Skip
OPR (Optimum Picture Response)
.23
.24
InstantTimerRecording(ITR).
Timer recording using On Screen Display .25-26
LanguageCodes.......................40
CountryCodes.........................40
Troubleshooting........................41
Specification..........................42
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3
Introduction
To
proper use of this product, please read this
owner's manual carefully and retain for future
ensure
reference.
provides
information
on
the
operation
and maintenance of your DVD player. Should the unit
require service, contact an authorized service location.
Discs
on
Handling
This manual
Symbol
Notes
Discs
Do not touch the
the
disc
on
by
playback side of the disc. Hold
edges so that fingerprints do not get
the
the surface. Never stick paper
or
tape
on
the disc.
Used in this Manual
The
lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk
of
electric shock.
The exclamation
point alerts you to the
presence of important operating and
maintenance / servicing instructions.
Indicates hazards
unit itself
or
likely
to
other material
cause
harm to the
damage.
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Note:
Indicates
special
notes and
operating
features.
Tip:
Indicates
tips
and hints for
A section whose title has
is
applicable only
symbol.
DVD
VCD
Do not
strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
DVD and finalized DVD±R/RW
use
Selecting
Video CDs
MP3
MP3 Discs
DivX
of the
spray intended for older
Audio CDs
JPEG
the task easier.
following symbols
represented by the
one
to the disc
CD
WMA
making
the
You must select
VCR)
to view
on
vinyl
records.
Viewing Source
of your output
the TV screen.
one
sources
(DVD
If you want to view DVD deck output source:
Press DVD until DVD indicator in the display window
or
?
WMA Discs
and
JPEG Discs
output
source
of DVD deck is viewed
on
lights
the TV
screen.
If you want to view VCR deck output source:
Press VCR until VCR indicator in the display window
?
DivX Discs
and
output
source
of VCR deck is viewed
on
lights
the TV
screen.
Notes:
About the
"
?
Symbol Display
"
may appear on your TV display during
operation and indicates that the function explained in
this owner's manual is not available
DVD video disc.
4
on
that
specific
If you insert a disc while the DVD+VCR is in the
VCR mode, the DVD+VCR will switch to DVD mode
automatically.
?
If you insert a cassette tape without prevention tab
while the DVD+VCR is in the DVD mode, the
DVD+VCR will switch to VCR mode
automatically.
Types
of
Playable
Discs
Regional
code
This DVD
player
is
designed and
playback of region
DVD
manufactured for
(8cm/12cmdisc)
encoded DVD software. This unit
only
Video CD
(VCD)
(8cm/12cmdisc)
DVD discs labeled "4"
Notes
Audio CD
?
(8cm/12cmdisc)
on
Regional
can
"ALL".
clearly
a
globe
visible
on
with
the
one or more
cover.
This number must match your DVD
code or the disc cannot play.
addition, this unit plays DivX file, DVD -R, DVD +R,
DVD -RW, DVD +RW, SVCD, and CD-R / CD-RW that
contains audio titles, MP3, WMA, and/or JPEG files.
play
4
Codes
Most DVD discs have
numbers in it
or
"4"
player's regional
In
This indicates
?
If you try to play a DVD with a different region code
from your player, the message "Check Regional
Code" appears
on
the TV
screen.
product feature that is
capable of playing DVD-RW discs
recorded with Video Recording format.
a
Notes:
?
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD -R, DVD +R,
DVD -RW, DVD +RW) disc itself, some CD-R/RW
(or DVD -R, DVD +R, DVD -RW, DVD +RW) discs
cannot be played on the unit.
?
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
?
Do not
irregularly shaped CDs (e.g.,
heart-shaped or octagonal) since they may
(the
use
result in
malfunctions.
Notes
on
DVDs and Video CDs
Some
playback operations of DVDs and Video CDs
may be intentionally programmed by software
manufacturers. This unit plays DVDs and Video CDs
according to disc content designed by the software
manufacturer, therefore some playback features may
not be available
or
other functions may be added.
Manufactured under license from
Dolby
Laboratories.
are
"Dolby" and the double-D symbol
trademarks of Dolby Laboratories.
DTS and DTS
Digital Out
Digital Theater Systems,
are
trademarks of
Inc.
5
Disc-related terms
PBC:
DVD±R/DVD±RW
version 2.0 disc formats. PBC allows you to interact
with the system via menus, search functions, or other
DVD -R and DVD +R
Playback Control (Video CD only)
Playback control is available for Video CD (VCD)
are
two different standards for
recordable DVD drives and discs. This format allows
information to be recorded onto the DVD disc
DVD +RW and DVD -RW
once.
re-writable
two standards for
media, meaning the DVD
erased and re-recorded.
4.38
are
Gigabytes
much. There
only
Single-sided
content
discs
can
can
hold
and double-sided discs hold twice
are no
dual
layer single
be
as
sided recordable
discs.
VCD
A VCD holds up to 74 minutes (650 MB disc) or 80
minutes (700 MB disc) of MPEG-1 full-motion video
with
quality
CDs.
Title
(DVD video discs only)
A title is generally a distinct section of a DVD disc. For
example the main feature could be title 1, a documentary describing how the film was made could be title 2,
and cast interviews could be title 3. Each title is
(Video CD)
along
typical computer-like operations. Moreover, still
pictures of high resolution can be played if they are
included in the disc. Video CDs not equipped with
PBC (Version 1.1) operate in the same way as audio
assigned
easily.
a
reference number
enabling
stereo sound.
Chapter (DVD video discs only)
A chapter is a segment of a title such
MPEG
MPEG is
an
you to locate it
international standard for video and audio
compression. MPEG-1 is used in encoding video for
VCD and provides for multichannel surround sound
coding such as PCM, Dolby Digital, DTS and MPEG
film
or one
interview in
a
series. Each
as a scene
chapter
in
a
is
assigned a chapter number, enabling you to locate the
chapter you want. Depending on the disc, chapters
may not be recorded.
audio.
Scene
MP3
On
MP3 is
audio
popular compression format used for digital
files that yields very high near-CD quality.
a
WMA
Windows media audio file. A
developed by
Microsoft
type of coding / decoding
(VCD)
video CD with PBC
(playback control) functions,
moving pictures and still pictures are divided into
sections called "scenes". Each scene is displayed in
the menu screen and assigned a scene number,
enabling you to locate the scene you want. A scene is
composed of one or several tracks.
a
Corp.
Track
JPEG
A distinct element of audiovisual
Joint Pictures
Expert Group.
file format that allows you to
on the number of colors.
JPEG is
save
compressed
images with no limit
a
information, such
the
picture or sound track for a specific language
(DVD), or a musical piece on a video or audio CD.
Each track is assigned a track number, enabling you
to locate the track you want. DVD discs allow
DivX
track of video
DivX is the
name
which is based
on
of
a
revolutionary
the
new
MPEG-4
standard for video.You will be able
movies
6
using
this DVD
new
player.
video codec
compression
to play DivX
as
of audio.
(with multiple angles)
one
and several tracks
Front Panel
POWER
Tape Eject
Switches the unit to ON
OFF.
or
Reverse
Go to
Skip/Scan, Rewind (
)
beginning of current chapter/track or
Press and hold for two seconds for
Rewinds the
a
fast
to PREVIOUS
reverse
chapter/track.
search.
tape.
Forward
Go to
Skip/Scan, Fast-Forward (
NEXT chapter/track.
Press and hold for two seconds for
Winds the
STOP
Disc
a
)
fast forward search.
tape forwards.
(
A
) Stops playback.
Tray
Insert
a
disc here.
PAUSE/STEP
( /
)
playback temporarily /
repeatedly for frame-by-frame playback.
Pause
press
DVD/VCR Selector
DVD OPEN/CLOSE
Opens
Display
DVD to VCR
Copy
or
VCR Record
(
)
closes the disc
Tape Compartment
tray.
Audio IN
window
Jacks
Shows the current status of the unit.
Button
(L/R)
Video IN Jack
Remote Sensor
PLAY
Starts
( G)
playback.
Display
Channel
Point the remote control here.
Selectors.
Window
Child Lock is
Indicates
Indicates the
engaged
repeat mode.
DVD+VCR is in timer
timer
recording
Progressive
a
VCR
disc is loaded in the
DVD deck and flashes when
no
or a
VCR deck is selected.
A disc is loaded in the DVD deck.
when
is
recording
programmed.
A Cassette is in the VCR deck.
Scan is set to On mode.
(Lights
Programme
recording
is
engaged.
DVD to VHS copy is in progress.
disc is
Indicates TV mode.
loaded.)
(See
Notes
on
page
24.)
DVD deck is selected.
DVD
VCR
P
REC
TV
Indicates total
playing time/elapsed
time/current time
7
Remote Control
POWER
Switch this unit ON or OFF.
DVD/VCR select button
Selects operational mode of
remote control.
OPEN/CLOSE
EJECT
Open or close the the disc
-
-
(see
-
VCR: Rewinds the
STOP
mode, for fast
TV VOL +/--:
tape during the
reverse
( )
Pause playback temporarily /
press repeatedly for frame-byframe playback.
PLAY (G)
Starts playback.
STOP(A)?
Stops playback.
?
Access
the
with PBC.
Displays
?
?
?
?
Play
language (DVD).
subtitle
a
LOCK
language.
input sources
(Child Lock)
on
into
tape.
and off.
TITLE
Display
the title
menu
of the disc if
available.
DISC MENU
of a DVD disc.
PROGRAM
Access or remove program menu.
MARKER
Mark any point during playback.
?
?
?
Repeat sequence.
recording speed of
SEARCH
Display MARKER SEARCH
?
tape.
RANDOM/CM SKIP
tracks in random order.
CM SKIP
?
-
audio
Switch the Child Lock
ENTER/OK
menu selection.
the
an
REC/ITR
Record your
-
Select the
video CD
?
-
-
a
?
Select channel programme of VCR.
To adjust tracking.
To control vertical tremble during
picture still.
-
of
ANGLE
Select DVD camera angle if available
ZOOM
Enlarge video image.
menu
A-B/LP
menu
?
PR/TRK(+/-)
menu
menu.
SUBTITLE
Select
FGDE(left/right/up/down)
Access
setup
AUDIO
Select
counter.
Acknowledge
or remove
RETURN
DISPLAY
CLK/CNT
Access the On-Screen Display.
Shows you the current time or
-
off TV sound.
SETUP/ i
?
item in the
on or
TV's volume.
SKIP(./>)
Go to next chapter or track. Returns to
beginning of current chapter or track
or go to previous chapter or track.
search.
an
Adjusts
MUTE: Turns
picture
search and Advances the tape during
the STOP mode, fast forward picture
Select
source.
TV PR +/--: Selects TV's channel.
forward.
PAUSE/STEP
recording
off the TV.
on or
TV AV: Selects the TV's
(m/M)
or
for
38)
p.
TV POWER: Turns
BACKWARD / FORWARD
DVD: Search backward
source
TV Control Buttons
TV/VCR
Switch between your TV's tuner
and the VCR's internal tuner.
-
Tape Eject.
AV
Select input
into tape.
0-9 numerical buttons
Select numbered items in a menu.
tray.
?
-
-
menu.
CLEAR
Clear
a
track number
on
the
program menu or a mark on the
MARKER SEARCH menu.
Reset tape counter to zero.
REPEAT
Repeat chapter, track, title, all.
-
?
Remote Control
Remote control
Operation
Point the remote control at the remote
sensor
mix different
Detach the
battery
of the remote
new
batteries and
types of batteries such
dard, alkaline, etc.
8
installation
and
press the buttons.
Do not mix old and
battery
never
as
stan-
AAA AAA
batteries
cover on
the
control, and insert
(size AAA)
aligned correctly.
with
and
rear
two
Rear Panel
AERIAL
Connect the aerial
this
using
jack.
AUDIO IN
Receive
(Left/Right) (VCR IN AV1)
the audio signals from an external
source
to VCR.
AUDIO OUT
Connect to
(Left/Right) (DVD/VCR OUT)
an amplifier, receiver or stereo system.
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
(DVD
EXCLUSIVE
Connect to
a
(Y
Pb
Pr)
OUT)
TV with Y Pb Pr
inputs.
AUDIO OUT
Connect to
(Left/Right) (DVD EXCLUSIVE OUT)
an amplifier, receiver or stereo system.
AC Power Cord
Connect to
a
power
source.
OPTICAL
(Digital audio out jack)
(DVD EXCLUSIVE OUT)
Connect to digital (optical) audio equipment.
S-VIDEO OUT
Connect to
a
(DVD
EXCLUSIVE
TV with S-Video
OUT)
input.
COAXIAL
Connect
(Digital audio out jack) (DVD EXCLUSIVE OUT)
to digital (coaxial) audio equipment.
VIDEO OUT
Connect to
VIDEO IN
(DVD/VCR OUT)
a TV with video inputs.
(VCR
IN
Receive the video
AV1)
signals
from
an
external
source
to VCR.
RF.OUT
Connect to your TV
using
this
jack.
Do not touch the inner
panel. Electrostatic
damage to the unit.
pins of the jacks on the rear
discharge may cause permanent
9
Installation and
Setup
Progressive Scan
Tips:
If your television is
high-definition or "digital ready"
television, you may take advantage of the DVD
Player's progressive scan output for the highest video
resolution possible.
your TV and other equipment you
wish to connect, there are various ways you could
connect the unit.
Depending
on
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make the
best connections.
For better sound reproduction, connect this unit's
AUDIO OUT jacks to the audio in jacks of your
amplifier, receiver, stereo or audio/video equipment.
See "Connecting to optional equipment" on page 11.
Caution:
Make
this unit is connected
Set the TV to the correct video
directly to the
input channel.
Do not connect this unit's AUDIO OUT
phono
in
Make
of your audio
jack (record deck)
Connecting
jack
TV.
to the
system.
to a TV & Decoder
of the
following connections, depending
on the capabilities of your existing equipment.
When using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, set TV's input to COMone
PONENT VIDEO.
When using the S-VIDEO OUT
input to S-VIDEO.
Basic connection
1.
jack,
set the TV'
a
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled if you try
Progressive Scan on the DVD Player.
1.
Connect the COMPONENT/ PROGRESSIVE SCAN
VIDEO OUT
sponding
2.
sure
connection
jacks on the DVD Player
jacks on the TV using the
in
to the
corre-
Y Pb Pr cable.
Right AUDIO OUT jacks of the
audio left/right in jacks on the TV
Connect the Left and
DVD
Player
to the
using
the audio cables.
Notes:
Progressive to "On" on the setup
progressive signal, see page 19.
Set the
does not work with the
Progressive
scan
connections
(yellow
VIDEO OUT
jack)
or
menu
for
analog
video
S-VIDEO
connection.
Rear of this unit
(DVD
exclusive out
connection)
s
(AV)
Connect the VIDEO
OUT to the video in
jack on this unit's DVD/VCR
jack on the TV using the video
cable.
2.
Connect the Left and
AUDIO
Right
unit's DVD/VCR OUT to the audio
on
the TV
using
the audio cables.
Basic connection
1.
jacks of this
left/right in jacks
(RF)
Connect the RF antenna cable from your indoor/
outdoor antenna to AERIAL jack on the rear panel
Rear of TV
AERIAL
VIDEO
INPUT
COMPONENT VIDEO INPUT
/PROGRESSIVE SCAN
of this unit.
2.
Connect the
RF.OUT
jack
Pr
the
panel
Input.
rear
television's Antenna
S-VIDEO INPUT
Y
RF antenna cable from the
supplied
on
Pb
AUDIO INPUT
of this unit to your
DVD exclusive out connection
Component
1.
Video
(Color Stream )
connection
Connect the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks on the DVD Player to
the
corresponding
in
jacks
on
the TV
using
the
Y Pb Pr cable.
2.
Connect the Left and
Right
AUDIO OUT
the DVD
the TV
Player to the audio left/right
using the audio cables.
in
jacks of
jacks on
S-Video connection
Rear of this unit
1.
Connect the S-VIDEO OUT
S-Video
input jack
on
the
jack on this unit to the
TV using the S-Video
cable.
2.
Connect the Left and
the DVD
the TV
10
Right
AUDIO OUT
Player to the audio left/right
using the audio cables.
in
jacks of
jacks on
(Basic connection)
Note:
If the TV has
with the S-video cable.
input, connect the DVD player
When using an S-video cable, do
not connect the
video cable.
an
S-video
yellow
Connecting
Optional Equipment
to
Connecting to an amplifier equipped with
channel analog stereo or Dolby Pro Logic
II /Pro Logic
two
Connect the Left and
this
Right
and right
unit to the audio left
er, receiver
or
AUDIO OUT
stereo
jacks
on
in
jacks on your amplifisystem, using the audio cables.
Notes:
If the audio format of the
the
capabilities of
produce a strong,
To
see
digital output
does not match
your receiver, the receiver will
distorted sound or no sound at all.
the audio format of the current DVD in the
On-Screen
Display,
press AUDIO.
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2 or DTS)
1.
Connect this unit's DIGITAL AUDIO OUT
(COAXIAL or OPTICAL) to
jack on your amplifier. Use
optical) audio cable.
2.
jack
the corresponding in
a digital (coaxial or
You will need to activate this unit's
"AUDIO"
(See
Digital
on
page
digital output.
20).
Multi-channel sound
A
digital multi-channel
sound quality. For this
connection
provides
the best
you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your unit (MPEG 2, Dolby
Digital and DTS). Check the receiver manual and the
logos on the front of the receiver.
Warning:
Due to the DTS
output will be in
Licensing agreement, the digital
DTS digital out when DTS audio
stream is selected.
Rear of this unit
2 channel
analog
stereo
Both DVD and
or
Dolby
Pro
Logic
II / Pro
Logic
connection
Digital
DVD exclusive out
VCR out
multi-channel
connection
(DVD exclusive
out connection)
COAXIAL
AUDIO INPUT
DIGITAL INPUT
OPTICAL
DIGITAL INPUT
Amplifier (Receiver)
11
Before
in
Tuning
Operation-VCR part
video channel
a
on
TV
your
Notes:
The
output frequency of this video recorder (VCR)
RF
by
another TV
torted, you
station,
or
if the
already
picture is dis-
change
8 will show you how
your VCR. Stages 5
change the output frequency of your VCR.
Your TV receives
signals
You
8.
VCR
video channel built into
Turn
on
Insert
video
pre-recorded
tape into your VCR
watch video's. Don't worry if you don't have a
video-tape to play at this stage! If you switch your
on
and continue
ing video playback
bright blue screen.
3.
stages 3
4, instead of
~
tune your TV until you
Tune this channel until the video
picture
see a
is
sharp
If you have used a AUDIO and VIDEO cables you
will not have to tune your TV, simply select the AV
channel. The AV channel is
4.
video
playback
Store this channel
I
on
the front of your VCR when you
so
appears.
Store this channel
on
that
on
already pre-tuned
for
your TV.
your TV.
You will need to look at the TV instruction book if
stages 1
on
stages
4. Select
~
a
5
6.
TV channel number
your TV. If you do not tune in a dedicated video
channel on your TV you will be unable to view and
record video tapes!
on
Using your VCR
for the very
first time
Following picture will display on the TV screen
when you have just connected your video
recorder for the very first time.
To make
tuning
3 to 4
shown "ACMS"
as
TV
stations, please follow stages
(see p.14).
more
Pr-12
(3/4)
on
the front of your VCR for
than 4 seconds.
RF68 will appear in the display window.
The following picture will be displayed on the TV
screen.
12
ACMS
on
displayed).
Press PROG.
screen
that you have correctly installed your VCR
and successfully tuned in a dedicated video channel
~
which you wish to watch video's.
Make sure that your VCR is in standby pressing
POWER on the remote control (only the clock will
be
blue
sure
8 if you cannot
obtain clear video playback as described in
Only
carry out
bright
your TV.
you do not know how to do this.
5.
a
see-
and the sound is clear.
optimum
which you wish to
Note:
and press PLAY on the remote control.
Select a TV channel number on which you wish to
VCR
on
your VCR.
on
your TV.
a
TV channel number
Tune this channel
Make
2.
a
have finished.
that you have correctly installed your
described earlier in this book.
Press POWER to turn
Select
Press
sure
as
RCA lead.
watch video's.
.
Make
a
a
your TV and tune it in so that
you may watch video tapes. If you have used a
AUDIO and VIDEO cables then your TV should
1.
to select another video
can
VCR with
on
already have a dedicated
it, usually called AV
(3/ 4)
also set it to "OFF" if there is any
interference when your TV is connected to the
from the video recorder
like another TV station. You have to select
channel number
Press PROG.
channel. You may select any channel number
between 28 and 68.
to
~
(VCR)
7.
the transmitter channel of
can
68
PSET
R
is set at UHF channel 68. If channel 68 is
used
CHANNEL
ACMS
Setting
the clock
Manually
The clock in your VCR controls time and date
settings for your VCR.
1.
Press i.
Press 1
or
2 to select SET.
Press OK.
To set the colour
system
1.
Press i.
2.
The main
3.
Press 1
or
2 to select the SYSTEM and press OK.
4.
Press 3
or
4 to select
menu
will appear
on
the TV
according
screen.
to the COLOUR
system used.
HHMNDDMMYY
:.
-
-
--
--
--
---
.
SET
fOSD
ON
OFF
2.
Use the v
or
V on
the remote control to alter the
HOURS, MINUTES, DAY, MONTH and YEAR.
5.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
The
of the week will appear
when you enter the year.
day
Press 1
or
2 to select the RF AUDIO.
Press 3
or
4 to select
:.
00101
.
to the RF AUDIO
used.
automatically
fOSD
HHMNDDMMYY
8
according
ON
OFF
SAT
6.
SET
3.
If you make a mistake press 1
correct details.
4.
Press i.
or
Press i to
remove
the
menus
from the TV
screen.
2 and enter the
13
How to
using
This VCR
easily be programmed by using
displayed on screen.
the
menu
can
menus
The
the main
controlled from the Remote
menus are
Control Handset.
1.
Switch
your TV set and video recorder
the POWER button.
on
pressing
2.
by
menu
will appear
on
the TV
Tuning
Automatically
If the TV broadcast
signal
is weak your VCR
may not detect the necessary information and
will not be able to store them correctly. To overcome
this
turn to the MANUAL TUNING
problem please
section
Press i button.
The main
in TV Stations
on
page 15.
1.
Press POWER to turn
2.
Press i button.
your DVD+VCR.
on
screen.
The main menu will appear on the TV
Press 1 or 2 to select the ACMS.
screen.
Press OK.
SET
SYS
fOSD
ON
OFF
ACMS
Pr-12
SET
REC
Timer
recording setting (see p. 25).
PR SET Manual tuning setting (see p. 15).
ACMS ACMS (Automatic Channel Memory
System) (see p. 14).
SET Date & clock setting (see p. 13).
SYS To set the Colour TV System (see p. 13).
(Dr.) To check a problem with your VCR
(see p. 36).
F.OSD ON/OFF To display the operational
-
Pr-12
fOSD
ON
OFF
Pr-12
ACMS
-
-
3.
Press OK
again
to start the automatic
tuning
process.
-
-
-
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
-
mode of your VCR
(see
(OPR)
-
p.
S
36).
Pr-12
ACMS
To
improve the playback picture
(see p. 23).
Tip:
You
14
The TV STATION TABLE will appear when
is completed.
save
your
settings.
can
Press 1 and 2 to select the desired
Press OK and press 3
4.
4.
Press i to
change the menu language on the DVD
setup menu. (See the Menu Language on page 18.)
3.
E
Press i to
remove
the
or
menu.
4 to select.
menus
from the TV
screen.
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
MOVE
:
DELETE
:
,
tuning
in TV Stations
Tuning
In certain
areas
of the
Manually
country broadcast signals
CH
04
C04
may be too weak for your DVD+VCR's automatic
tuning process to find or assign TV stations
PR
:
AV
PSET
R
You must tune in these weaker broadcast stations
6.
in order for your DVD+VCR to store
Press i.
The main
Press 1
will appear on the TV
2 to select the PR SET.
menu
or
Press 2 to select STATION
so
that you may
name
your TV station.
Press OK.
them.
1.
STATION
CHANNEL/CABLE
correctly.
manually
MFT
7.
screen.
Use 3
or
station
name.
Use 1
Press OK.
or
4 to select letters and numbers for the
2 to
move
back and forth between
characters.
Press OK.
PR
CH
01
MFT
STATION
00
PR-03
Pr-12
ACMS
SET
SYS
fOSD
CHANNEL/CABLE
ON
OFF
:
AV
PR
CH
MFT
04
C04
00
STATION
PSET
R
2.
PSET
R
Press i.
The station table will appear.
3.
Press 3
8.
Press
i, confirm the station placement.
4 to select the programme number that
you want to tune (for example, PR 04).
or
PR
01
C01
00
PR-01
02
C02
00
PR-02
03
C03
00
PR-03
--
--
-----
--
--
-----
--
--
-----
--
--
-----
05
06
07
08
PSET
R
MOVE
:
DELETE
:
CH
04
C04
STATION
MFT
00
PSET
R
If you wish to
stages 3 8.
,
manually
tune other stations
repeat
-
4.
Press OK.
Press AV to select C
(Standard stations)
or
S
(Cable stations):
C02
-
C69, S01
-
tune,
use 3 or
S41.
4 to find the
MFT
STATION
--
----
04
PR-01
02
C02
00
PR-02
03
C03
00
PR-03
07
required
08
station.
PSET
R
Press i
Your
CH
00
06
9.
PR
C01
05
Enter the channel number of station that you want
to
01
CHANNEL/CABLE
:
--
--
-----
--
--
-----
--
--
-----
--
--
-----
MOVE
:
DELETE
:
,
again.
new
TV station has
now
been tuned into your
DVD+VCR.
AV
P
SET
R
5.
Searching
will
stop when it locates
a
stations.
Press 2 to select MFT.
Control the fine
tuning
of the station
by using
3 or
4.
15
the order of TV Stations
Changing
After
tuning TV stations into your VCR you may
wish to change the order in which they are
stored without having to retune them against!
The instructions given on this page will show you
how you can simply move them into your desired
Deleting
After
TV stations into your VCR you may
wish to delete a station.
tuning
how you
stations.
1.
order.
1.
TV Stations
can
Press 1
The main
Press 1
will appear on the TV
2 to select the PR SET.
menu
or
delete any unwanted TV
Press i.
The main
Press i.
easily
will appear on the TV
2 to select the PR SET.
menu
or
screen.
Press OK.
screen.
Press OK.
PR
CH
01
MFT
STATION
00
PR-03
Pr-12
SET
ACMS
SYS
fOSD
PR
CH
MFT
STATION
00
PR-03
01
CHANNEL/CABLE
ON
OFF
:
AV
PSET
R
Pr-12
ACMS
SET
SYS
fOSD
CHANNEL/CABLE
ON
OFF
:
AV
P
SET
R
2.
2.
Press i.
3.
Press 3
Press i.
Press 3
4 to select the
or
you want to
Press 2.
move
PR
4 to select the
you want to delete.
programme number
(for example,
or
02
C02
00
PR-02
03
C04
00
PR-04
05
01
C01
00
PR-01
01
C01
00
PR-01
06
02
C02
00
PR-02
02
C02
00
PR-02
07
03
05
06
07
08
C04
PR-04
04
00
--
--
-----
05
--
--
-----
06
--
--
-----
07
--
--
-----
08
PSET
R
MOVE
:
DELETE
:
08
C04
00
--
C03
--
PR
01)
-----
00
PR-03
--
--
-----
--
--
-----
--
--
-----
PR-04
--
--
-----
--
--
-----
--
--
-----
--
--
-----
PSET
R
4.
PSET
R
,
(for example,
03).
04
04
programme number
MOVE
:
DELETE
:
,
Press 1.
After
a
short
while, the selected station will be
deleted.
3.
Press 3
4 to select the
or
you want to
move
to
programme number
(for example,
01
C01
00
PR-01
02
C02
00
PR-02
03
C04
00
PR-04
04
--
--
PR
If you wish to delete other TV stations
stages 3 4.
05).
-
02
03
07
08
04
05
--
--
-----
--
--
-----
--
--
-----
06
07
08
PSET
R
4.
5.
The selected programme will be moved to the
new programme number.
move
other TV stations
repeat
-
01
C01
00
PR-01
02
C02
00
PR-02
03
C04
00
PR-04
04
06
07
08
--
--
-----
--
--
-----
--
--
-----
--
--
-----
PSET
R
5.
16
Press i to
remove
--
C03
the
00
PR-04
--
-----
MOVE
:
DELETE
:
menus
,
from the TV
screen.
Press i to
remove
00
PR-03
--
--
-----
--
--
-----
--
--
-----
--
--
-----
PSET
R
Press OK.
If you wish to
stages 1 4.
C02
-----
05
06
repeat
the
MOVE
:
DELETE
:
menus
,
from the TV
screen.
Before
Operation-DVD part
On-Screen
You
Display
the
general playback status on the TV
screen. Some items can be changed using the menu.
To use the on-screen display:
display
can
Press DISPLAY
1.
The selected item is
Press b / B to
3.
an
inputting
Title Number
the
change
the title
Chapter
highlighted.
For
number).
some
also
If
no
provide
button is
on-screen
Playback
Title
A-B
for 10
1/12
functions,
B, Numbers
ENTER
0:20:09
Numbers, ENTER
b/Bor
AUDIO
InstaliodSeup
setting.
all of the features
seconds, the
pressed
display disappears.
language
ABC
b/Bor
1 ENG
SUBTITLE
Angle
b/Bor
1/3
ANGLE
Sound
3D SUR
b/B
Status/Restrictions
Example: On-Screen Display during
playing VCD
Repeat
title
Repeat
sequence
Selection Method
Items
1/9
b /
language
and Digital Audio
Output mode
Notes:
?
B, Numbers
Audio
Subtitle
Some discs may not
shown below.
Number
Time search
setting. You can
appropriate (e.g.
press ENTER to execute the
?
1/3
b /
ENTER
item.
the number buttons if
use
Selection Method
Items
during playback.
Press v / V to select
2.
Example: On-Screen Display during
playing DVD Video
Enter
a
Marker
Track Number
MARKER SEARCH
123456789
Marker Search
menu
(or
PBC
1/3
Action
play
from this
prohibited
or
ENTER
Numbers
0:20:09
point
not available
B, Numbers
mode)
Time search
Resume
b /
ENTER
b/Bor
Audio Channel
STEREO
Sound
AUDIO
3D SUR
b/B
Example: On-Screen Display during
playing divx movie disc
Selection Method
Items
Track Number
1/3
b /
B, Numbers
ENTER
Time search
0:20:09
Audio
language
and Digital Audio
Output mode
Subtitle
Sound
language
b/Bor
1
MP3
ABC
Numbers, ENTER
ENG
AUDIO
b/Bor
SUBTITLE
3D SUR
b/B
17
Initial
LANGUAGE
Settings
LANGUAGE
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 18 to 22.
To
display
display
the
Disc Subtitle
Off
Disc Menu
Original
2.
Use v / V to select the desired
alternate
Setup
menu
appears.
option then press
to the second level. The screen shows
the selected
item,
Use v / V to select the second desired
press B to
move
as
well
option
as
then
Select
a
language
for the
Use v / V to select the desired
5.
Press SETUP
then press
ENTER to confirm your selection. Some items
require additional steps.
setting
PLAY to exit the
Original:
Refers to the
disc
recorded.
was
Setup
menu
and
on-screen
DVD
Setup
menu.
original language
Other: To select another
track
in which the
language, press number
buttons then ENTER to enter the corresponding 4-digit
number according to the language code list in the
reference chapter. If you enter the wrong language code,
press CLEAR.
to the third level.
4.
or
Language
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
Press SETUP. The
setting for
setting(s).
Select
Select the
1.
the current
Menu
Disc Audio / Subtitle / Menu
Operation
move
Move
display.
To go back to the previous level:
Press b on the remote control.
18
Original
screen.
To go to the next level:
Press B on the remote control.
3.
Disc Audio
A second press of
menu.
SETUP will take you back to initial
B to
English
Language
and exit the Menu:
Press SETUP to
General
Menu
4. When the confirm
DISPLAY
Cancel is
DISPLAY
TV
16
Aspect
Display
Mode
Progressive
menu
:
to
9Wide
highlighted
highlight Enter.
as
appears on your screen
default. Use the b button
Widescreen
Scan
5.
Off
Pressing
scan
ENTER will set this unit to
Progressive
mode.
Caution:
Once the
Move
TV
:
Select
DVD
Aspect
4:3
setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan to
Select when
a
On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc tray.
See that "DISC" is displayed on the display window.
standard 4:3 TV is connected.
16:9 Wide: Select when
16:9 wide TV is connected.
a
2)
Press STOP and hold it for five seconds before
Display
Display
DVD
Mode
Mode
setting
works
only
when the TV
InstaliodSeup
output will be restored to the
standard setting and a picture will once again be
visible on a conventional analog TV or monitor.
releasing
it. The video
Aspect
mode is set to "4:3".
LetterBox: Displays a wide picture with bands
upper and lower portions of the screen.
on
the
Panscan: Automatically displays the wide picture on the
entire screen and cuts off the portions that do not fit.
Progressive
Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
To turn On
progressive
scan:
Connect
component out of this unit to the input of your
monitor/television, set your television or monitor to
Component Input.
1. Select
"Progressive
Scan"
on
the DISPLAY
menu
then press B.
DISPLAY
TV
Aspect
Display
Mode
Progressive
Scan
On
Off
Prev.
2. Select "On"
using
Move
Enter
the v / V buttons.
3. Press ENTER to confirm your selection.
The confirm menu will appear.
Note:
If your TV does not accept the Progressive Scan format,
the picture will appear scrambled if you try Progressive
Scan
on
the DVD
Player.
19
AUDIO
Each DVD disc has
Set this unit AUDIO
audio
system you
variety of audio output options.
options according to the type of
a
use.
AUDIO
Dolby Digital
Bitstream
DTS
Bitstream
MPEG
PCM
Sample Freq.
48KHz
DRC
On
Vocal
On
Move
Dolby Digital
Select
DVD
/ DTS / MPEG
DivX
Bitstream: Select "Bitstream" if you connect the
DVD Player's DIGITAL OUT jack to an amplifier or
other
equipment
with
Dolby Digital,
a
DTS
or
MPEG decoder.
PCM
MPEG): Select when
connected to a two-channel digital stereo amplifier.
DVDs encoded in Dolby Digital or MPEG will be
automatically downmixed to two-channel PCM
(for Dolby Digital
/
audio.
Off
not
(for DTS): If you select "Off", the DTS signal
output through the DIGITAL OUT jack.
is
DVD
Sample Freq. (Frequency)
If your receiver or amplifier is NOT capable of handling 96 kHz signals, select 48 kHz. When this choice
is
made, this unit automatically converts any 96 kHz
signals to 48 kHz so your system can decode them.
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz. When this choice is made,
this unit passes each type of
any further processing.
signal through
Check the documentation for your
its capabilities.
Dynamic Range
With the DVD
Control
format, you
amplifier
DVD
(DRC)
can
hear
a
without
to
verify
DivX
program's
soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology.
However, you may wish to compress the dynamic
range of the audio output (the difference between the
loudest sounds and the
quietest ones).
This allows
you to listen to a movie at a lower volume without
losing clarity of sound. Set DRC to On for this effect.
Vocal
DVD
Set to On
playing.
only
when
multi-channel karaoke DVD is
The karaoke channels
normal stereo sound.
20
a
on
the disc mix into
OTHERS
The
DivX(R)
PBC, Auto Play and DivX(R) VOD settings
can
be
changed.
You
VOD
DivX
display the DivX DRM (Digital Rights
Management) Registration code for your unit only.
can
OTHERS
PBC
Auto
DivX(R)
On
Off
Play
Your
DivX(R)
Video On Demand
VOD
Select
registration
code is
To learn
more
:
XXXXXXXX
visit
www.divx.com/vod
(Done)
Move
Select
The
PBC
Set
Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rent an
VCD
Playback
Control
(PBC)
On: Video CDs with PBC
to On
are
or
encrypt
Off.
played according
to the
PBC.
Off: Video CDs with PBC
are
played
the
same
way
as
Audio CDs.
Auto
You
Play
move
Notes:
If you rent the DivX VOD file, it has several
viewing limits as shown below.
?
Display
DVD
set up the DVD Player so a DVD disc automatically starts playing whenever the DVD is inserted.
Play
mode is set to
play
back the title
longest playback
automatically.
On: Auto
Play
function is active.
Off: Auto
Play
function is not active.
Play
function may not work for
DivX(R)
can
options
of
watch the file.
VOD Rental
This rental has 3 views left.
Do you want to
On, this DVD player will
search for title that has the
then
the number which you
View
can
If Auto
InstaliodSeup
file.
use one
of your 3 views now?
time and
(Yes) (No)
?
The rental has been
expired.
Notes:
The Auto
some
DVDs.
Rental
Expired
(Done)
?
Display
the authorization
error.
Authorization Error
This
player is not authorized
to play this video.
(Done)
21
LOCK
Password
(Parental Control)
You
LOCK
Rating
Unlock
Password
New
Area Code
AU
(Security Code)
enter
can
2. Follow
step
Input
Move
shown left
4-digit code,
again to verify.
it
that may not be suitable
of these discs contain
scenes
Many
parental control information that applies to the
complete disc or to certain scenes on the disc. Movies
and scenes are rated from 1 to 8, depending on the
country. Some discs offer
suitable
more
scenes as an
control feature allows you to block
to scenes below the rating you input, there
new
1.
Press SETUP to
2.
Input
the
6-digit
display
Enter
a new
code
1. Select
Enter the code of the
"Rating"
on
the LOCK
menu
then
Setup
clear it
using
menu.
security
Rating, Password and Country Code
features, you must input the 4-digit security code
you created. If you have not yet entered a security
code you are prompted to do so.
the
Input a 4-digit code and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press CLEAR.
rating
a
from 1 to 8
using
1.
tions and
Rating one (1)
rating eight (8) is
the least restrictive.
Unlock
If you select
and the disc
unlock, parental control is
plays
not active
in full.
Notes:
rating for the player, all disc scenes with
rating or lower are played. Higher rated
are not played unless an alternate scene is
a
on
the disc. The alternative must have the
rating or a lower one. If no suitable alternative
found, playback stops. You must enter the 4-digit
password or change the rating level in order to play
same
is
the disc.
4. Press ENTER to confirm your rating
press SETUP to exit the menu.
selection, then
whose standards
disc, based
on
the
chapter.
Select "Area Code"
on
the LOCK
menu
then press
2.
Follow
3.
Select the first character
4.
Press ENTER and select the second character
using
the v / V buttons.
has the most restric-
country/area
B.
5.
1-8:
described above.
DVD
list in the reference
access
as
used to rate the DVD video
were
press B.
available
the
can
by
Area Code
scenes
menu.
number "210499" and the
your children from being able to view
material you believe is unsuitable.
If you set
the same
or
then press ENTER.
If you forget your security code you
the following steps:
3.
preventing
Rating
(Rating). "Change"
code is cleared.
parental
3. Select
then press B.
forget your Security Code
If you
alternative.
2. To
menu
Select
DVD
for children to view.
22
as
the LOCK
4. Press SETUP to exit the
Some movies contain
access
2
on
highlighted.
3. Enter the
The
change password.
1. Select Password
"New" is
Rating
or
step
2
as
shown left
(Rating).
using
v / V buttons.
v / V buttons.
Press ENTER to confirm your
selection.
country code
Operation
Playing
You will
only
a
Logic search:
During fast forwarding
tape
be able to load and
eject video
rewinding press and hold
FORWARD or BACKWARD the picture will be
played back at 7 times normal playback speed.
cassettes
when your VCR is plugged into the mains.
Your VCR may also playback recordings from NTSC
tapes (on
PAL
Getting
a
better
When
cassette is inserted and
a
5.
TV).
picture
playback started,
the
automatic
tracking function works to get the best possible picture automatically. If the quality of the recording is
poor, repeatedly press TRK + or on the remote control
to manually adjust the tracking until any distortions have
to switch automatic
1.
Make
back
tracking
on
on
as
Turn
on
again.
reduce them with TRK
that you have correctly connected your
described earlier in this book.
your TV.
Press POWER to turn
may appear on the picture according to the status
of tape. If distortions can be seen in the picture,
the remote control
sure
VCR
6.
2.
Press PLAY to start
facing
your tape.
video cassette which has had its
cassette will start
removed, playback of the
automatically.
AUTO TRACKING
Your VCR will
give
3.
the best
automatically adjust
picture quality.
Press PAUSE/STEP to still
Press PAUSE/STEP
the
tracking
to
2 Press 60 seconds
picture.
repeatedly to advance
3 Press 90 seconds
a
4 Press 120 seconds
the
5 Press 150 seconds
down at about 1/19 times the normal
OPR
be
playback
for up to 5 minutes. After 5
minutes your VCR will stop the tape to prevent
damaging the tape or your VCR
paused
Still
picture quality can
pressing TRK + or
be
improved slightly by
playing
your tape.
Double
speed playback
Press the "N (X2)" button during normal
playback. The tape will play back at double speed
1.
Press i.
2.
Press 1
3.
Press OK.
4.
Press
normal
(X2)"
Response)
3
or
2 to select OPR.
or 4
repeatedly
to select:
OFF, SOFT
or
SHARP.
and without sound.
Press the "N
Picture
automatically improves playback picture
quality by adjusting your VCR to the condition of the
tape. Please note that the OPR icon ( ) will only
appear in play that mode when playing a tape.
-.
Press PLAY to continue
(Optimum
This feature
.
4.
1 Press 30 seconds
6 Press 180 seconds
can
Operation
(Commercial Message) Skip:
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then
resume normal playback.
While tape is playing press CM SKIP on the remote
control to skip commercial (or another programme
material).
Repeatedly press CM SKIP to skip:
tape frame by frame.
If you press FORWARD, the picture will be slowed
Tapes
playback.
CM
away from you.
playing
If you load a
record protection tab
-.
tape is reached, your VCR will
stop playback automatically, rewind, stop, eject the
tape.
on
arrow
or
If the end of the
The video cassette should have the window side
up and the
Press STOP to end
+
Press EJECT.
your VCR.
Insert the video cassette into your VCR.
facing
playback, Shuttle :
During playing back or still picture press F or G.
You can reach the following playback speeds.
(-7xplay, -3xplay, -play, still, 1/19 slow, play,
2xplay, 7xplay). To switch off the slow motion and
Slow motion
shuttle, press the desired function.
During slow motion and shuttle, the noise bars
-
been removed. Press numbered 0
or
button to return to
playback
Please note you may
at
playing
speed
5.
Picture search:
a
only
set OPR when
tape.
Press i return to
screen.
back press either FORWARD or
BACKWARD and this will enable you to rapidly
During playing
wind the
tape (7 times normal playback) and
where you are on the tape.
see
Pr-12
PSET
R
ACMS
OFF
SOFT
SHARP
fOSD
ON
OFF
23
Instant Timer
5.
Recording (ITR)
Your VCR allows you to make
variety of simple methods:
recordings using
Your VCR
runs
6.
7.
will record up to 180 minutes using Standard Play
(SP); using LP you will be able to record up to 360
minutes. Please note there will be
picture
1.
and sound
Make
VCR
quality
Insert
a
your VCR.
The video cassette should have the window side
up and the arrow facing away from you.
Press PR + or to select the programme number
facing
3.
-
you wish to record.
You may also directly select programme number
using the numbered buttons on the remote
4.
paused for up to 5 minutes; RECP
will be displayed when a tape is paused. After 5
minutes your VCR will stop recording to prevent
damaging the tape or your VCR.
8.
can
EJECT will appear
seconds.
AV 1 for
VIDEO
from AUDIO L/R
recording
(VCR IN AV1)
terminals
on
(VCR
the
IN
rear
AV1)/
of your
unit.
AV 2 for
recording
from AUDIO IN
VIDEO IN terminals
on
(L(MONO)/R)/
the front of your unit.
the TV
If you do not wish to record
screen
for
few
a
on a
tape (this
can
happen quite easily by accident!) remove the
protection tab on the back edge of the video
It is
press AV until the socket you wish to record from
is displayed.
on
Notes:
If you wish to record directly from the AUDIO L/R
(VCR IN AV1)/ VIDEO (VCR IN AV1) or AUDIO IN
repeatedly
recording.
Press EJECT.
cassette.
VIDEO IN terminals
be
Press STOP to end
control.
(L(MONO)/R)/
24
If you press PAUSE/STEP
unit will
enter the record pause mode and ITR is cancelled.
Tapes
your VCR.
video cassette with protection tab into
unwanted
recording.
during ITR, this
loss in
on
recording
Press PAUSE/STEP to continue
that you have correctly connected your
described earlier in this book.
as
Press PAUSE/STEP to avoid
scenes.
sure
Press POWER to turn
2.
when
slight
using LP.
a
recording.
press will increase the record time by 30 minutes
until you reach a maximum of 9 hours.
which
enables you to record up to twice the amount of
time on a video cassette. For example an E-180
Press REC/ITR to start
RECORD will appear on the TV screen.
Press REC/ITR several times. Each successive
out.
incorporates Long Play (LP)
or
produce improved picture and sound quality, however LP will provide twice as much recording time as SP.
Instant Timer
video cassette
Long Play
SP will
a
Recording (ITR) start recording
immediately for a set period of time or until the
Press LP if you wish to record in
Standard Play.
possible to record on a video cassette
record protection tab removed by covering
with self adhesive
with the
the hole
tape.
Remember you can record one programme while
watching another by starting your instant recording,
press TV/VCR to appear TV indicator in the display
window and then selecting a different channel on
your TV.
recording using On
Screen Display
Timer
PR
DATE
TIME
PR-03
You may set up to seven timer record events
within one month of the current date.
::
--
--
-~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
SUMOTUWETHFRSA
Note:
Before
setting
the timer make
set the DVD+VCR clock
sure
correctly
that you have
and you know
which stations you have tuned TV stations
your DVD+VCR.
6.
Use v/V/1/2 buttons to enter the
Insert
a
video cassette with
protection
on
Please note your DVD+VCR uses a 24 hour clock.
e.g. 1pm will be displayed as 13:00.
2.
up and the
facing
arrow
DATE
PR-03
tab into
your DVD+VCR.
The video cassette should have the window side
facing
away from you.
).
7.
Press OK.
41 4 ::
00 1 5
SP
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Press B to select the
Press v
PR
DATE
(SP, IP,
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
SP
--
SP
--
Use the PR/TRK
(v/V)
necessary, to
,
PR-03
the timer record event.
setting
tape is left and
SP
--
PR
Press OK to start
tape speed
LP).
speed from SP to LP, if
complete recording the program.
SP
--
or
V to select the desired
switches
SP
--
or
recording speed.
IP mode determines how much
SP
--
DELETE:
4.
TIME
Press i.
Press1or2toselectREC(
3.
start
and end times of the programme that you wish to
record.
PR
1.
recording
to enter the station that
DATE
TIME
41 4 ::
00 1 5 30
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
you wish to record then press 2.
PR
DATE
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
Note:
If all timer record events
full press v or V to
select the event that you wish to remove and replace.
Press b to delete the event.
5.
Use the PR/TRK
are
(v/V)
to enter the date of the
programme.
If you press OK before
select
one
of the
entering the date you may
following automated recording
features.
Press 1
or
2 to
select, then press OK
DLY To record every day (except
Sunday) at the same time.
SU~SATo record at the
same
to confirm.
Saturday
and
time every week.
25
recording using On
Screen Display (Continued)
Timer
8.
Press i to set another timer record event and
follow
3 to 8.
steps
Check that the timer event details
Press i return to
correct.
screen.
If PLEASE CHECK is
you have entered
and will need to re-enter the data.
incorrectly
9.
are
displayed,
Press POWER to switch your DVD+VCR to Timer
Standby mode.
The timer
will appear in the display
window while your DVD+VCR waits to make the
symbol (
)
recording.
10. Press POWER to end timer
recording.
Notes:
The DVD+VCR will
Timer
power off when
ends.
Recording
During
automatically
timer
recording standby mode, the DVD
cannot be operated. To use the
VCR mode
and
DVD+VCR, press POWER. After you use the DVD
or VCR, press POWER again to put the VCR into
timer
If at
mode.
recording standby
later date you wish to delete or change any
of the settings in timer event memory you may do
so
a
without
mation
Use v
delete
having to enter all the timer event inforagain. Simply display the timer event screen.
or
or
V to select the event that you wish to
change.
Press b to delete the event...or
Press OK to
then press b or B to
Start and End times and
change;
Station, Date,
Press v
recording speed.
or
select;
V to enter the correct
information.
If Timer record events
Make
ing
sure
Overlap...
that the
events do not
preset times of the timer recordoverlap. If they do, the earlier pro-
gramme will
always
Example:
Programme
1 is
be
given priority.
programmed
to start at 16:00 and
programmed
to start at 16:30 and
end at 17:00.
Programme
end
2 is
at 17:30.
(In this case, Programme 1 will be recorded in its
entirety, but only the last 30 minutes of Programme
2 will be recorded.)
To watch
a
DVD while
performing
press DVD to select DVD mode.
26
a
timer
recording,
Playing
a
DVD
or
General Features
Video CD
Note:
Playback Setup
Turn
1.
on
the TV and select the video
connected to the DVD
Turn
2.
the
on
the audio
input
source
input
source
player.
system (if applicable) and select
connected to the DVD
player.
Press OPEN/CLOSE to open the disc tray and
load your chosen disc in the tray, with the
3.
side down.
playback
Press OPEN/CLOSE to close the
4.
starts
automatically.
If
playback
tray. Playback
does not start,
press PLAY.
In
some
cases, the disc
menu
might
Unless stated
Moving
to another TITLE
When
disc has
a
title/chapter
you want to view, then press ENTER to start.
Press TITLE or DISC MENU to return to the menu
screen.
and
stopped
then the
b / B to
move
You
(See
on
page
?
can
title
operating
21).
another
?
To watch
a
The
region
code for this
is 4
more
disc has
than
one
chapter/track
Press .
than
more
track, you
one
chapter
can move
or a
to
follows:
as
briefly during playback to select
the next chapter/track or to return to the beginning
of the current chapter/track.
?
Press
ous
or
>
. twice
briefly
to
step back
to the
previ-
chapter/track.
To go
directly
to any
chapter during
DVD
playback,
press DISPLAY and press v / V to select the
chapter/track icon. Then, input the chapter/track
numberoruseb/B.
Search
1.
Press m
or
M
during playback.
2.
Press m
or
M
repeatedly
to select the
required
speed.
DVD
during
timer
DVD, DivX disc; X2, X4, X16
Video CD; X2, X4 or X8
recording standby
mode, press POWER and DVD
mode.
player
on a
?
?
DVDs may have a region code. Your player does
not play discs that have a region code different from
a
disc has
parental control is set and the disc is not within
the rating settings you must input the password.
(See "Lock Menu" on page 22.)
player.
(four).
its number while
When
If
your
to
to another title.
to another CHAPTER/TRACK
Notes:
?
can move
playback is
appropriate number (0-9) or use
Moving
may differ. Follow the instructions on
the each menu screen. You also may set PBC to
"PBC"
title, you
one
play any title by inputting
playback is stopped.
procedures
Off
than
another title. Press DISPLAY while
Use the number buttons to select the track you
want to view and press RETURN to return to the
settings
more
appear
Use the b B v V buttons to select the
Menu
use
the remote control. Some features may also be
available on the Setup menu.
instead:
menu screen.
otherwise, all operations described
to switch to DVD
3.
To exit SEARCH
Changing
X100
mode, press PLAY.
the Audio Channel
Press AUDIO
different
or
repeatedly during playback to hear
audio channel (Stereo, Left, or Right).
a
27
Still Picture and
Frame-by-Frame Playback
Repeat
You
Press PAUSE/STEP
1.
the remote control
during
playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly.
To exit still motion
2.
on
mode,
title/chapter/all/track on a disc.
REPEAT during playback to select a desired
play
can
Press
a
repeat mode.
DVD Video Discs
press PLAY.
?
Slow Motion
Repeat Chapter/Title/Off
Chapter: repeats the current chapter.
?
Title:
?
Off
repeats the
does not
:
-
current title.
play repeatedly.
Video CDs, Divx discs Repeat Track/All/Off
?
Track : repeats the current track
-
Press PAUSE/STEP
1.
The DVD
Use m
2.
player
or
(X) during playback.
will
now
M to select the
1/16, t 1/8, t 1/4,
1/16, T 1/8, T 1/4,
With
go into PAUSE mode.
or
t
or
T
required speed:
1/2 (backward), or
1/2 (forward).
t
T
discs, Video CD, the Slow speed
changes: T 1/16, T 1/8, T 1/4 or T 1/2
To exit Slow Motion
playback
in
reverse
is not
with
possible
Video CDs and DivX Discs.
If you press > once during Repeat Chapter
playback, the repeat playback cancels.
The unit
in
mode.
during playback
stop
automatically begins random playback
or
and RANDOM appears
Press RANDOM
again
To
produce
a
3D surround effect that simulates
the TV
on
1.
Press DISPLAY
2.
Use 3
screen.
or
to normal.
3.
during playback.
4 to select the sound
The sound
option
will be
option.
highlighted.
Use1or2totoselect"3DSUR".
To turn off the 3D Surround
Tip:
By pressing
another title
>
during random playback, the unit selects
(track) and resumes random playback.
Note:
Video CD with
menu
to
use
PBC, You
must set PBC to Off
the random function
(See
on
"PBC"
on
the
1.
playing
at any chosen time
box shows the
2.
on
Press DISPLAY
page
21).
effect, select "Normal".
Time Search
To start
setup
(Track)
speakers (instead
of the five+ speakers normally required for multi-channel audio from a home theater system).
Press RANDOM
a
play repeatedly.
multi-channel audio from two stereo
Random
On
does not
:
3D Surround
Slow motion
2.
Off
disc.
on a
mode, press PLAY.
Note:
1.
?
repeats all the tracks
:
Notes:
?
(forward).
3.
All
?OnaVideoCDwithPBC,youmustsetPBCtoOffonthe
setup menu to use the repeat function (See "PBC" on
page 21).
Divx
a
?
the disc:
during playback. The
elapsed playing time.
time search
Press v / V to select the time clock icon and
"-:--:--" appears.
Repeat
To
1.
2.
3.
28
A-B
repeat
a
3.
starting point.
again at your chosen
"A B" appears briefly on the TV
repeat sequence begins.
again
"
A
*
required
start time in
to cancel.
end
4.
point.
screen
and the
hours, minutes, and
If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
"
screen.
Press A-B
Press A-B
the
seconds from left to
sequence.
Press A-B at your chosen
appears briefly on the TV
Input
right.
Press ENTER to confirm.
selected time.
Playback
starts from the
Zoom
Use
1.
to
zoom
the video
enlarge
Press ZOOM
image.
during playback
still
or
playback
to
1600% size
screen
→
fit mode
→
the
can
100% size
when
screen
zoomed
4.
To
through
normal
playback,
press ZOOM repeat-
?
may appear.
menu, the
Otherwise, the disc
screen.
offers features such
subtitle
a
angles,
as camera
options,
and
Press TITLE to exit.
3.
press CLEAR button.
or
Disc Menu
Notes:
?
menu
spoken language and
chapters for the title.
the
picture.
resume
edly
move
appears
menu
on
the
menu
The
2.
Use the bBvVbuttons to
corresponding number or use the b
to highlight your selection. Then press
Press TITLE. If the current title has
Normal, Enhanced,
and Maximum.
3.
the
ENTER.
1.
image appears on
you're playing a DVD movie.
Press 3/4 to select between
Input
Title Menu
the way the
change
the contents of DVD discs: Menus
B v V buttons
Screen fit mode:
You
Checking
MENU.
Each press of the ZOOM button changes the TV
screen in the sequence: 100% size → 400% size
→
DVD Features
DVDs may offer menus that allow you to access
special features. To use the disc menu, press DISC
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
2.
Special
Zoom may not work on some DVDs.
Screen fit mode is available for playing the DVD
Press DISC MENU and the disc
Press DISC MENU
again
is
menu
displayed.
to exit.
disc, VR disc and movie file.
Camera
Marker Search
Angle
If the disc contains
To enter
You
Marker
a
start
can
from up to nine memorized
marker, press MARKER at the
desired
point
the TV
screen
a
angles, you can change to a different camera
angle during playback. Press ANGLE repeatedly
during playback to select a desired angle. Note that
the number of the current angle appears on the
display.
camera
playback
To enter
points.
recorded at different
scenes
the disc. The Marker icon appears
briefly. Repeat to enter up to nine
on
on
markers.
To Recall
1.
2.
or
Clear
During
disc
search
menu
Within 10
a
Marked Scene
press SEARCH. The marker
appears on the screen.
playback,
seconds, press
b / B to select
number that you want to recall
3.
Press ENTER and
marked
Changing
scene.
playback
or
a
You
clear.
starts from the
Or, press CLEAR and the marker
on
any marker by
the marker search menu.
can
play
inputting
Language
Press AUDIO
different
repeatedly during playback
audio language or audio track.
to hear
a
marker
number is erased from the list.
4.
the Audio
its number
Subtitles
Press SUBTITLE
the different
repeatedly during playback
subtitle languages.
to
see
Note:
?
The subtitle file of the DivX file is
smi,
?
displayed only
srt and sub.
If there is
no
information
not read in the DivX
file,
or
"
1
there is
"
or
etc.
a
code that
are
can
displayed.
29
Playing
Audio CD
an
or
MP3/WMA
MP3 / WMA disc
limited
Disc
?
as
compatibility
with this
player
is
follows:
within 8
48 kHz (MP3),
Sampling frequency:
within 32 48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32
192kbps (WMA)
The player cannot read an MP3/WMA file that has
a file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
-
-
The DVD
player can play MP3/WMA formatted
recordings on CD-ROM, CD-R, or CD-RW discs.
?
-
-
?
Audio CD
Once you insert an audio CD a menu appears on the
TV screen. Press v / V to select a track then press
PLAY
or
ENTER and
playback
?
?
starts.
AUDIO CD
1/12
0:52:07
List
Program
creates
Track1
an
Track2
?
Track3
Track4
File
names
and must
Track5
Track6
?
Track7
Clear All
Track8
PROGRAM
They
ISO 9660 file
system.
should have
a
incorporate
an
should not contain
maximum of 8 letters
.mp3 or .wma extension.
special letters such as /
?*:"<>letc.
Edit
?
The total number of files
on
the disc should be
less than 650.
MP3 / WMA
1.
Press v / V to select
to
2.
folder, and press ENTER
a
the folder contents.
see
Press v / V to select
ENTER.
Playback
track then press PLAY
a
or
starts.
player requires
discs and
recordings
to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files) and
MUSIC
0:00:00
This DVD
1/12
these
List
require certain pre-existing conditions (see
above) to ensure compatible playback.
Program
1-Music1
2-Music2
Customers should note that
3-Music3
4-Music4
required
5-Music5
6-Music6
DISPLAY
Info
PROGRAM
Edit
should
ID3 TAG
?
When
track
owner.
playing
titles, you
If there is
the
containing
information such
as
the information
by pressing
[ Song, Artist, Album, Comment, Genre ]
DISPLAY.
?
file
a
no
can see
information, "No ID3 TAG" appear
on
menu screen.
Tip:
?
If you
are
in
a
file list
return to the Folder
on
list,
the MUSIC
menu
the v / V to
use
and want to
and
highlight
press ENTER.
?
Press DISC MENU to
?
On
?
CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
a
PHOTO word
on
When
a
playing
titles, you
30
to the next page.
move
top of the
file
can see
menu
containing
is
highlighted.
information such
the information
is
in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
Clear All
7-Music7
permission
by pressing
as
track
DISPLAY.
always
be
sought
from the
copyright
Audio CD and MP3 / WMA Disc
Random
Features
1.
Pause
1.
2.
Press PAUSE/STEP
press
Moving
1.
playback, press PLAY,
PAUSE/STEP again.
ENTER
or
or
the next track
>
to
or
2.
To return to normal
until
repeatedly
playback, press RANDOM
RANDOM disappears from the
menu screen.
Tip:
to another Track
Press .
during playback or when
playback is stopped. Random Playback begins
immediately and RANDOM appears on the menu
screen.
during playback.
To return to
Press RANDOM
briefly during playback to go to
return to the beginning of the
By pressing
>
during
another track and
random
resumes
playback, the
random playback.
unit selects
current track.
2.
Press . twice
briefly
to go back to the
Repeat
previous
track.
3.
In
case
of audio
CD,
Repeat
You
1.
can
1.
To
2.
Press A-B
again at your chosen end point.
The Repeat icon and "A-B" appear on the menu
screen, and the sequence begins to play
repeatedly.
3.
To exit the sequence and return to normal play,
press A-B again. The Repeat icon disappears from
to go
enter the track number
buttons
directly to any track,
using the numbered
(0-9).
Track/All/Off
play
a
track/all
on a
Press REPEAT when
disc.
playing
a
disc. The
repeat
icon appears.
2.
?
?
?
a
desired
does not
To
repeat playback
during Repeat
Track
menu screen.
playback,
produce
a
3D surround effect that simulates
multi-channel audio from two stereo
speakers (instead
of the five+ speakers normally required for
multi-channel audio from a home theater system).
play repeatedly.
Note:
once
a
3D Surround
repeats the current track
All: repeats all the tracks on a disc.
Off(No display):
repeat
repeat mode.
Track:
If you press >
sequence during disc playback press
A-B at your chosen starting point. The Repeat icon
and "A" appear on the menu screen.
the
Press REPEAT to select
A-B
the
cancels.
1.
Press AUDIO
during playback.
"3D SUR." appears
2.
Search
Press m
or
M
during playback.
2.
Press m
or
M
repeatedly
speed: X2, X4,
3.
X8
To exit SEARCH
to select the
backward
or
the
menu screen.
To return to normal
repeatedly
1.
on
until
playback, press AUDIO
"3D SUR." disappears from
the
menu screen.
required
forward.
mode, press PLAY.
31
Repeat Programmed
Programmed Playback
1.
A program
1.
Insert
2.
memory.
contain 30 tracks.
can
a
player
Press REPEAT when
Press REPEAT to select
?
disc.
?
?
Audio CD or MP3/WMA Discs:
AUDIO CD or MUSIC menu appears.
2.
mark will appear to the right of the word
"Program" on the right side of the menu screen.
Note:
disappear
to exit
the
0:52:07
1.
mark will
MUSIC
List
E
Program
Track1
Track5
Track2
Track7
1-Music1
4-Music4
Track3
Track4
2-Music2
6-Music6
Track4
Track1
3-Music3
1-Music1
2-Music2
4-Music4
Track6
5-Music5
Track7
6-Music6
Clear All
Track8
E
Program
Track5
Clear All
7-Music7
DISPLAY
Audio CD Menu
PROGRAM
Info
setup
menu
"PBC"
on
to
the
use
must set PBC to Off
on
programmed playback
E
Program
Track1
Track5
Track2
Track2
Track3
Track3
Track4
Track1
Track5
Clear All
Video CD Menu
3.
Select
a
track
on
the
"List", then press ENTER
to
place the selected track on the "Program" list.
Repeat to place additional tracks on the list.
4.
Press B.
Select the track you want to start
"Program" list.
5.
Press PLAY
or
playing
list have
To
normal
resume
playback,
select
a
played
on
the
once.
playback
from
track of CD
and then press PLAY.
32
the
Playback begins
programmed the tracks.
the order in which you
Playback stops after all of the tracks
6.
on
ENTER to start.
"Program"
Program
stop mode
to
Edit mode.
move
to the
"Program"
list.
Repeat
to
erase
erase
additional tracks
the list.
the
Follow
Complete Program
as
steps
programmed
(or MP3/WMA) list
in
1-2 of
"Erasing
a
List
Track from
Program
above.
Use 3/4 to select "Clear
complete Program
All", then press ENTER.
for the disc will be erased.
Note:
The programs
removed.
VIDEO CD
List
Press PROGRAM in the
Press CLEAR.
2.
21).
page
:
4.
List"
Note:
the
the
List
Program
Use v/V to select the track that you wish to
from the "Program" list.
Erasing
menu.
PBC, you
during Repeat Track playback,
3.
The
Video CD with
once
Press B to
Video CD: Press PROGRAM while playback is
stopped. The program menu appears. Press
a
play repeatedly.
2.
1.
On
repeat mode.
Edit
MP3/WMA Menu
PROGRAM to exit the
does not
Track from
a
Video CD
on
PROGRAM Edit
desired
1/12
0:00:00
1/12
List
(See
Off(No display):
enter
Edit mode.
AUDIO CD
a
repeats the current track
All: repeats all the tracks on programmed list.
Erasing
again, then
the Program
repeat
repeat playback cancels.
E
Press PROGRAM
disc. The
Track:
If you press >
E
a
Note:
Press PROGRAM.
The
playing
icon appears.
The program function enables you to store your
favorite tracks from any disc in the
Tracks
are
also cleared when the disc is
Viewing
this DVD
Using
JPEG Disc
a
Player
you
can
Moving
view discs with JPEG
files.
1.
Insert
disc and close the
a
the TV
on
appears
tray. The PHOTO
menu
screen.
Press.or>orcursorborBoncewhile
Use
(see
Preview
List
JPEG Folder 1
to advance to the next
viewing a picture
previous file.
or
JPEG
Zoom
PHOTO
JPEG
to another File
the
to
enlarge
page)
zoom
29
photo image.
JPEG Folder 2
>>>
JPEG Folder 3
To rotate
JPEG Folder 4
JPEG Folder 5
picture
JPEG Folder 6
Press v / V
JPEG Folder 7
during showing
JPEG Folder 8
picture
clockwise
or
a
counter clockwise.
To listen to MP3/WMA music
2.
Press v / V to select
a
folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the previous Folder
list,
the v / V buttons
use
the remote to
and press ENTER.
highlight
3.
on
Viewing the file proceeding starts.
While viewing a file, you can press STOP
to the previous menu (PHOTO menu).
Slide Show
to
PLAY.
the
(Slide Show)
(Normal)
?
On
then
?
>
Speed options
(Slow).
(Fast),
: >>>
2.
Press TITLE to
3.
Press v / V to select
4.
Use B / V to select
on
top of the
2.
player
display
a
PHOTO
photo
menu.
file.
pressed.
JPEG disc
menu
is
limited
?
highlighted.
compatibility
now
during
slide show.
follows:
as
upon the size and number of JPEG
files, it could take a long time for the DVD player
to read the disc's contents. If you don't see an
Depending
2048
go into PAUSE mode.
To return to the slide
PAUSE/STEP
is
player
display
after several
minutes,
some
of
---
JPEG
will
with this
the files may be too large
reduce the resolution
of the JPEG files to less than 2M pixels as 2760 x
Press PAUSE/STEP
The
Operation
types of file in
icon then press ENTER.
starts. The playback will continue until
on-screen
1.
the two
Tip:
RETURN, information of file is hidden.
Still Picture
containing
>>
disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
Press
disc.
same
only the desired music watching picture,
programmed the desired tracks from the "MUSIC"
menu and then proceed as above.
a
PHOTO word
the
to MP3/WMA
To listen to
three Slide
and
on
listening
player.
STOP is
highlight
files while
Insert the disc
Playback
Tip:
are
display
move
press ENTER.
There
can
music files recorded
JPEG
Use vVbBto
?
You
the
or
watching picture
JPEG
1.
If you want to view a particular file, press
v / V to highlight a file and press ENTER
to rotate the
picture
show, press PLAY
or
?
press
pixels
and burn another disc.
The total number of files and folders
the disc
on
should be less than 650.
again.
?
Some discs may be incompatible due to a
different recording format or the condition of disc.
?
Ensure that all the selected files have the
extensions when
?
into the CD
If the files have
rename
?
copying
".jpg"
layout.
File
them
names
".jpe" or ".jpeg" extensions, please
as ".jpg" file.
without
able to be read
the files
are
Windows
by
shown
".jpg"
extension will not be
this DVD+VCR. Even
as
JPEG
image
though
files in
Explorer.
33
Playing
This unit will
play
DVD-R/RW discs recorded
the DVD-Video format that have been
a
?
using
finalized using
Refer to the information in this
contacting
This unit will
play DVD-RW discs recorded using
Recording (VR) format.
Insert
a
disc and close the
menu
appears
on
the TV
When
screen.
save
Do not
ENTER and
playback
Press TITLE to
move
track then press PLAY
or
starts.
to the list
menu.
near
volatile
liquids
such
as
insecticide
the unit.
plastic products in contact
long period of time. since they
or
with the unit for
a
leave marks
the surface.
Cleaning
on
the unit
To clean the
Note:
Unfinalized DVD-R/RW discs cannot be
played
in this
player.
?
use
Do not leave rubber
?
a
the
the exterior surfaces clean
spray
Press v / V to select
the unit
original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
?
?
service technician.
shipping
Keeping
3.
before
the Unit
Handling
Please
tray. The DVD-VR
DVD-VR
2.
a
chapter
DVD-recorder.
the Video
1.
Maintenance and Service
DVD VR format Disc
a
Some DVD-VR disc
RECORDER.
are
Player
made with CPRM data
does not
by
DVD
support these kinds of
discs.
player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution.
Do not
or
use
thinner,
strong solvents such
as
these
as
might damage
alcohol, benzine,
the surface of the
unit.
What is 'CPRM'?
CPRM is
only
scramble
copy protection system (with
system)
allowing the recording of 'copy once' broadcast
a
programs. CPRM stands for Content Protection for
Recordable Media.
This
player
is CPRM
compatible,
which
means
that you
record copy-once broadcast programs, but you cannot
then make a copy of those recordings. CPRM recordings
can
can
only
be made
on
DVD-RW discs formatted in VR
mode, and CPRM recordings
players
that
are
only
specifically compatible
can
be
played
on
with CPRM.
Maintaining
the Unit
The DVD
player is a high-tech, precision device.
optical pick-up lens and disc drive parts are dirty
worn, the picture quality could be diminished.
or
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
For
details, please
service center.
34
If the
use.
contact your nearest authorized
Playing
a
DivX Movie Disc
DivX disc
as
this DVD
Using
Insert
1.
a
appears
Player
you
can
disc and close the
on
the TV
play
compatibility
with this
player
is limited
follows:
DivX disc.
?
tray. The MOVIE
menu
Available resolution size of the DivX file is under
720x576
(W
x
H) pixel.
screen.
?
The file
name
of the DivX subtitle is available
by
56 characters.
MOVIE
0:00:00
List
?
Movie Folder 1
If there is
impossible code to
file, it may be displayed as
display.
"
Movie Folder 2
Movie Folder 3
Movie Folder 4
Movie Folder 5
express in the DivX
mark on the
"
_
Movie Folder 6
Movie Folder 7
?
Movie Folder 8
If the number of the screen frame is
over
30
per 1 second, this unit may not operate
normally.
Press v / V to select
2.
a
folder, and press ENTER.
?
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use the
v / V buttons
on
the remote to
If the file is recorded with
*
or
PLAY.
move
On
is
CD with
highlighted.
Operation
are
called
1-point, 2-point,
or
Xvid, have this option.
different levels of GMC
or
3-point
encoding, usually
GMC.
to the next page.
MP3/WMA, JPEG and MOVIE file, you can
switch MUSIC, PHOTO and MOVIE menu. Press TITLE
and MUSIC, PHOTO and MOVIE word on top of the menu
a
encoders, like DivX
There
Playable
?
GMC, the unit
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
MPEG4
Press STOP to exit.
Press DISC MENU to
audio is
GMC?
Tip:
?
or
supports only 1-point of the record level.
If you want to view a particular file, press
v / V to highlight a file and press ENTER
4.
interleaved, either video
outputted.
?
press ENTER.
3.
file is not
and
highlight
If the video and audio structure of recorded
DivX file
z ".avi ",
".mpg ", ".mpeg
Playable
Codec format
"
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ".
Playable
Audio format
z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
?
Sampling frequency: within 8 48 kHz (MP3),
-
within 32
?
Bit
32
48kHz
(WMA)
rate: within 8
320kbps (MP3),
192kbps (WMA)
-
-
-
35
Additional Features-VCR
On Screen
You may
part
Video Doctor
Display
the current time
easily display
tape
or
counter, amount of tape left, day, month, year, day of
programme channel, tape speed and operational mode of your VCR will appear on the TV
screen. If a recording is taking place these On Screen
week,
Displays
will not be recorded onto the
This feature informs you that there is a problem with your
DVD+VCR. These error messages will appear on the TV
screen.
1.
Press i.
Press1or2toselect
.
Press OK.
tape.
Press CLK/CNT to
1.
display.
repeatedly
Press CLK/CNT
The
display options.
tape
to
a
counter and the amount of
Press CLK/CNT
the TV
to
again
PSET
R
tape loaded.
majority of the
leaving only the
will clear
12
Pr-12
After 3 seconds the
Displays
the
cycle through
counter and amount of
tape left will appear if there is
2.
(Self-Diagnosis)
SET
SYS
fOSD
ON
OFF
On Screen
clock
tape left
remove
ACMS
the
on
all
or
tape
screen.
displays
ANTENNA CONNECT
from
HEAD STATUS
TAPE STATUS
NO. OF TIMER PROGRAMME
screen.
NEXT TIMER PROGRAMME
PLEASE CHECK
Tape Counter Memory Stop
The
i
displayed on the
the time by pressing
CLK/CNT on the remote control. The Digital Tape
Counter indicates the relative positions of recordings
Digital Tape Counter
display window instead of
on
1.
the
can
be
2.
Press CLEAR to set the counter to 0:00:00.
recording.
will display the
tape counter
in hours, minutes and seconds.
2.
Press STOP when
playback
or
actual
play
recording
time
problem.
is
NEXT TIMER PROGRAMME
O PR-01 26 10:00~11:00SP
Shows the current status of timer
Press BACKWARD.
tape will rewind and automatically stop when
the counter returns to 0:00:00.
3.
Lock
(Child Lock)
The control buttons
switched off
using
1.
on
the front of the unit
that your unit
the remote control.
so
can
only
be
can
be
operated
Press LOCK.
and SAFE will appear in the display window.
None of the buttons on the front of your unit will
work.
If any buttons
on
the front of your unit
SAFE will flicker in the
display
are
window for
pressed
a
few
seconds.
2.
36
jack securely.
Press LOCK
to switch off the child lock.
OFF will
in the
again
disappear
display
window.
place
NO. OF TIMER PROGRAMME
O2
Shows the number of timer recording.
complete.
The
a
TAPE STATUS
O NOT RECORDABLE:
Insert a tape with its protection tab in
start
The
to check
HEAD STATUS
O PLEASE CLEAN:
Clean your video heads.
Press CLK/CNT.
or
3 or 4
ANTENNA CONNECT
O PLEASE CHECK:
Connect the aerial into the
tape.
Press PLAY
Press
Press i to
remove
the
menus
recording.
from the TV
screen.
Hi-Fi Stereo Sound
Your VCR will record and
System
playback
Hi-Fi stereo
sound. This allows you to record and playback the
sound in several different ways. Video cassettes
recorded on your VCR will have a normal mono audio
track and two VHS Hi-Fi stereo audio tracks. These
stereo tracks allow you to make audio recordings in
Hi-Fi stereo or bilingual mode from a TV broadcast,
stereo audio
1.
system, video disc
or
another Hi-Fi VCR.
Your VCR allows you to enjoy broadcasts with
standard stereo, bilingual and mono sound. The
particular type of sound received or that recorded
will be briefly displayed on the TV screen for a
couple of seconds:
STEREO
Sound is
automatically
stereo and
mono
recorded
on
tracks of the video
the Hi-Fi
tape.
BIL
Both audio channels will be recorded
stereo tracks. The
will be recorded
on
primary language
the
mono
on
the Hi-Fi
channel
(left)
track of the video
tape.
MONO
The sound is recorded
mono
2.
track of the video
Press AUDIO
on
the Hi-Fi tracks and the
tape without any separation.
repeatedly
until the desired audio
mode appears.
3.
The choice is
MONO.
STEREO, LEFT, RIGHT and
In BIL
playback
the
primary language
output on the left channel and the secondary
channel is output simultaneously from the right
is
channel when audio
output is set to STEREO.
The primary language willbe output from both
channels when the audio
Please note that when
setting is MONO.
adjusting the tracking
control Hi-Fi stereo sound may revert to MONO.
37
Controlling
Additional Features
Last Scene
This
source, and
power switch of your LG TV with the supplied remote
control.
Memory
memorizes last
player
that is viewed. The last
scene
from the last disc
remains in memory
the disc from the player or switch
scene
if you remove
off the player. If you load
even
memorized, the
scene
is
a
disc that has the
can
control the sound
level, input
You
can
control the sound
level, input
power switch of non-LG TVs as
is listed in the table below, set the
player
manufacturer code.
1.
does not memorize the
player
before
disc if you
to play the disc.
scene
commencing
of
in
appears when you leave the DVD
mode for about five minutes.
Stop
Video Mode
Setting
down TV POWER
2.
(see
the table
Release TV POWER button.
If
more
them
than
one
one
at
a
code number is
1
Zenith
1,3,4
Samsung
6,7
not
Sony
8,9
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
Hitachi
4
video mode.
Note:
flickering
That
Dot Crawl is shown
or
means
To
Vertical
straight
on
interpolation
or
lines.
De-interlace is
the video
mode, press and hold
change
DISPLAY about 3 seconds during disc playback.
Video mode sequence:
MODE1 → MODE2 → MODE3
→
MODE1
:
The
video
MODE2
:
Description
source
material)
:
(film
materi-
is determined from disc information.
Suitable for
based material
MODE3
of each Video Mode
material of the DVD video
playing film based content or video
recorded by the progressive scan method.
Suitable for
comparatively
playing
video based content with
little motion.
Note:
The video mode
Progressive
menu.
setting only
works when the
Scan mode is set to "On"
on
the
Depending
function
setup
that works
on
(Default),
2
your TV, some or all buttons may not
the TV, even after entering the correct
on
manufacturer code.
?
If you enter a new code number, the code number
previously entered will be erased.
?
When you replace the batteries of the remote, the code
number you have set may be reset to the default setting.
Set the
MODE1
If you turn off the power, the video mode will return
to initial default state (MODE1).
Detailed
?
video mode number selected is
displayed
on the TV screen. Check whether the video quality
has improved. If not, repeat the above procedure
until picture quality is improved.
new
one
with your TV.
LG / GoldStar
discs, the playback picture may be
listed, try entering
time until you find the
Code Number
or
button, press the
below).
Manufacturer
With certain
38
holding
Code numbers of controllable TVs
screen saver
player
al
While
for your TV
a
Screen Saver
The
appropriate
number buttons to select the manufacturer code
switch off the
The
source, and
well. If your TV
scene
recalled.
automatically
You
Note:
This
other TVs with the remote control
appropriate
code number
again.
from DVD To VCR
Copying
This unit allows you to copy the contents of a DVD to
a VHS tape with a press of the COPY button.
Notes:
Be
sure
setup
to set
Scan" to "Off"
on
the
recorder
With this video recorder you can make recordings
from an external source, such as copying from
another video recorder
protected,
3.
In the
Insert Disc
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
Insert VHS Tape
Insert a blank VHS
videotape
following description, this video recorder will be
one used for recording and will be referred to as VCR
B. The other appliance will be used for playback and
will be referred to
the DVD to VHS Tape
Press the COPY button on the unit front
press the REC/ITR button.
If the DVD disc
to press the
IN
AV1)/VIDEO (VCR
IN
AV1) on the rear
(L(MONO)/R) /
or
appears, you may need
button manually to begin
menu
Play
VCR A.
of your unit or AUDIO IN
VIDEO IN on the front panel of your unit.
Copy
panel
as
VCR A should be connected to the AUDIO L/R
(VCR
panel
into the VCR deck.
The DVD will go into Play mode and the VCR
will go into Record mode.
2.
Insert the recorded
tape into VCR A and
a
blank
tape into VCR B.
3.
copying.
Note:
Press AV until the socket you wish to record from
is displayed. (VCR B)
AV 1 for
recording from AUDIO
(VCR IN AV1) terminals
L/R
VIDEO
on
(VCR
the
IN
rear
AV1)/
of your
unit.
If you press the REC/ITR
DVD mode.
4.
camcorder.
Note:
attempting to copy is copy
you may not be able to copy the disc.
are
1.
2.
or a
menu.
If the DVD you
1.
"Progressive
from another video
Recording
button, be
Stop the Copy Process
When the DVD is finished
end the copy.
sure
this unit in
4.
playing,
over
5.
and
over
To start
from AUDIO IN
on
on
(L(MONO)/R)/
the front of your unit.
press the REC/ITR
VCR A.
recording,
and PLAY
press STOP to
stop the Copy process manually
when the DVD movie ends, or the unit may
and record
recording
VIDEO IN terminals
You must
replay
AV 2 for
When you want to finish
on both video recorders.
copying,
on
VCR B
press the STOP
again.
39
Reference
Language Codes
Use this list to
your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
input
Language
Code
Abkhazian
following
Code
6566
Language
Fiji
Afar
6565
Afrikaans
initial
settings:
Code
7074
Language
Lingala
Code
7678
Language
Singhalese
Finnish
7073
Lithuanian
7684
Slovak
8375
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
Ameharic
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
8373
8471
8479
Area Codes
Choose
a area
Area
Code
Code
Area
Code
Area
Code
ET
Malaysia
MY
Saudi Arabia
SA
AR
FJ
Maldives
MV
SN
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
Chile
CL
Hong Kong
Hungary
HU
NG
Switzerland
CH
China
CN
India
IN
Nigeria
Norway
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
Republic
AF
Area
Ethiopia
Fiji
Afghanistan
Argentina
Czech
40
code from this list.
SG
SK
UG
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
KW
Portugal
PT
Uzbekistan
UZ
Egypt
EG
LY
Romania
RO
Vietnam
VN
El Salvador
SV
Libya
Luxembourg
LU
Russian Federation
RU
Zimbabwe
ZW
Troubleshooting
Check the
following guide
for the
possible
cause
or
VCR do not
problem
a
before
contacting
service.
Cause
Symptom
DVD
work
of
DVD
or
Correction
VCR button is not switched
Refer to page 2.
properly.
properly.
No power.
The power cord is disconnected.
the power cord into the wall
outlet securely.
The power is on, but
the DVD player does
not work.
No disc is inserted.
Insert a disc. (Check that the DVD or,
audio CD indicator in the display
window is lit.)
No
The TV is not set to receive DVD
Select the appropriate video input
mode on the TV so the picture from
the DVD player appears on the TV
picture.
signal output.
Plug
screen.
No sound.
The video cable is not connected
Connect the video cable into the
securely.
securely.
The Progressive Scan is set to "On"
on the setup menu but is connected
to a standard (analog) television.
Set
The equipment connected with the
audio cable is not set to receive DVD
Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
signal output.
The audio cables
are
not connected
picture
is
poor.
The DVD
not start
does
player
playback.
Turn on the equipment connected
with the audio cable.
The
Set the
is set to the
The disc is dirty.
The TV channels are not tuned in
An
unplayable
properly.
disc is inserted.
placed upside
down.
within the
placed
guide.
Video
tape
properly.
cannot be
jacks
The power of the equipment connected with the audio cable is turned off.
The disc is not
does not work
Connect the audio cable into the
securely.
The disc is
The remote control
Scan to "Off"
securely.
Digital Audio Output
wrong position.
The
Progressive
(see page 19).
jacks
Digital Audio Output to the
correct position, then turn on the DVD
player again by pressing POWER.
Clean the disc.
Check tuning, carry out
tuning again.
Insert a playable disc. (Check the disc
type and Regional code.)
Place the disc with the
down.
playback
Place the disc on the disc
rectly inside the guide.
The disc is
dirty.
Clean the disc.
The
level is set.
Cancel the Rating function
the rating level.
Rating
There is an obstacle in the path of the
remote control and this unit.
Remove the obstacle.
The batteries in the remote control
are exhausted.
Replace
Is the cassette
Eject
compartment empty?
the
the batteries with
tray
or
side
cor-
change
new ones.
tape in.
inserted.
No Hi-Fi sound
Audio mode is not set
properly.
Select "STEREO" by repeatedly pressing "AUDIO" on the remote control.
41
Specification
General
Power
requirements
AC
Power
consumption
17W
Dimensions
Mass
110-240V, 50/60 Hz
430 X 78.5 X 265
(approx.)
4.2
(approx.)
mm
(w/h/d)
kg
Operating temperature
5˚C to 35˚C
Operating humidity
5%to90%
Timer
24 hours
RF Modulator
UHF 28
(41˚F
to
95˚F)
display tape
-
68
(Adjustable)
System
Laser
Semiconductor
Video Head
laser, wavelength
Double azimuth 6
system
650
heads, helical scanning.
Signal system
PAL
Frequency
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
response
nm
CD:8Hzto20kHz
ratio
Signal-to-noise
More than 100dB
(ANALOG
Harmonic distortion
Less than 0.008%
Dynamic
More than 100 dB
range
More than 95 dB
OUT connectors
only)
(DVD)
(CD)
Inputs (VCR)
Audio
-6.0dBm,
more
Video
1.0
75
Vp-p,
than 47 kohms
ohms, unbalanced
Outputs (DVD)
VIDEO OUT
1
Vp-p 75 ohms, sync negative
(Y) 1.0 Vp-p 75 ohms, negative
(C) 0.3 Vp-p 75 ohms
S-VIDEO OUT
COMPONENT VIDEO OUT
sync., Mini Din
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
(Progressive Scan)
Audio
output (digital audio)
Audio output (optical audio)
0.5V(p-p),75Ω,RCAjackx1
3 V (p-p), 75 Ω, Optical connector
Audio
2.0 Vrms
output (analog audio)
(1 KHz,
0
dB),
x
4-pin
x
x
1
1
1
600 Ω, RCA
jack (L, R)x2
Outputs (VCR)
Audio
-6.0dBm, less than
Video
1.0Vp-p,
Design
and
specifications
are
Manufactured under license from
"DTS" and "DTS
42
Digital
Out"
are
subject
Dolby
to
change
Laboratories.
trademarks of
Digital
75
1 kohms
ohms, unbalanced
without notice.
"Dolby"
Theater
and the double-D
Systems,
Inc.
symbol
are
trademarks of
Dolby
Laboratories.
P/NO
:
3834RV0036Q
Download PDF

advertising