LG | CM1530 | LG CM1530 Owner’s Manual

ENGLISH
OWNER’S MANUAL
Micro Hi-Fi System
Please read this manual carefully before operating your set and retain it
for future reference.
CM1530 (CM1530, CMS1530F)
CM1530-FU_AAUSLLK_ENG_6418.indd 1
2013-06-05
9:20:20
1
Getting Started
2
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within
an equilateral triangle is
intended to alert the user to the
presence of important operating
and maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CM1530-FU_AAUSLLK_ENG_6418.indd 2
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service centre.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not
try to open the enclosure.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
centre. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
2013-06-05
9:20:20
Getting Started
This device is equipped with a portable battery or
accumulator.
yy The appliance is not intended for use by young
children or infirm persons without supervision.
yy Young Children should be supervised to
ensure that they do not play with appliance.
yy If the appliance is supplied from a cord
extension set or an electrical portable outlet
device, the cord extension set on electrical
portable outlet device must be positioned so
that it is not subject to splashing or ingress of
moisture.
1
Getting Started
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
3
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
CM1530-FU_AAUSLLK_ENG_6418.indd 3
2013-06-05
9:20:20
4
Table of Contents
Table of Contents
1
Getting Started
2
Safety Information
6
Unique Features
6Accessories
6
Playable file Requirement
6
– MP3/WMA music file requirement
7
– Compatible USB Devices
7
– USB device requirement
8
Remote Control
9
Front Panel
10 Back Panel (Case1)
10 Back Panel (Case2)
2Connecting
11
11
11
11
12
12
12
3Operating
13
13
13
14
14
14
14
15
15
15
15
15
16
16
16
16
Basic Operations
– CD/ USB Operations
– Selecting a folder
Other Operations
– Programmed Playback
– Displaying file information (ID3 TAG)
– Turn off the sound temporarily
Radio Operations
– Listening to the radio
– Improving poor FM reception
– Presetting the Radio Stations
– Deleting all the saved stations
Sound adjustment
– Setting the surround mode
Listening to music from your external
device
Auto Power Down
Connecting the speakers to the unit
– Case1 : Connecting the speakers to
the unit
– Case2 : Attaching the speakers to the
unit
Antenna Connection
Optional Equipment Connection
– USB Connection
– PORT. IN Connection
CM1530-FU_AAUSLLK_ENG_6418.indd 4
2013-06-05
9:20:20
Table of Contents
5
4Troubleshooting
17Troubleshooting
1
5Appendix
18 Trademarks and Licenses
19Specifications
20Maintenance
20 – Handling the Unit
20 – Notes on Discs
2
3
4
5
CM1530-FU_AAUSLLK_ENG_6418.indd 5
2013-06-05
9:20:20
6
Getting Started
Unique Features
1
Playable file
Requirement
Portable In
Getting Started
Listens to music from your portable device. (MP3,
Notebook, etc)
Radio
MP3/WMA music file
requirement
Listens to the radio.
MP3/ WMA file compatibility with this unit is limited
as follows.
USB
yy Sampling Frequency : 8 - 48 kHz (MP3), 8 - 48 kHz
(WMA)
Listens to music from your USB device.
yy Bit rate : 32 - 384 kbps (MP3), 32 - 384 kbps
(WMA)
yy Maximum files : Under 999
yy File extensions : “.mp3”/ “.wma”
Accessories
yy CD-ROM file format : ISO 9660/JOLIET
Please check and identify the supplied accessories.
Remote Control (1)
Battery (1)
CM1530-FU_AAUSLLK_ENG_6418.indd 6
yy We recommend that you use “Easy-CD Creator”,
which creates an ISO 9660 file system.
yy You have to set the disc format option
to [Mastered] in order to make the discs
compatible with the LG players when formatting
rewritable discs. When setting the option to Live
File System, you cannot use it on LG players.
(Mastered/Live File System : Disc format system
for Windows Vista)
2013-06-05
9:20:21
Getting Started
7
Compatible USB Devices
yy MP3 Player : Flash type MP3 player.
yy USB Flash Drive :
Devices that support USB1.1 or USB2.0
1
Getting Started
yy The USB function of this unit does not support
all USB devices.
USB device requirement
yy Devices which require additional program
installation when you have connected it to a
computer, are not supported.
yy Do not extract the USB device while in operation.
yy For a large capacity USB, it may take longer than
a few minute to be searched.
yy To prevent data loss, back up all data.
yy If you use a USB extension cable or USB hub, the
USB device is not recognized.
yy Using NTFS file system is not supported. (Only
FAT(16/ 32) file system is supported.)
yy This unit is not supported when the total
number of files is 1 000 or more.
yy External HDD, Card readers, Locked devices, or
hard type USB devices are not supported.
yy USB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
yy Some USB may not work with this unit.
CM1530-FU_AAUSLLK_ENG_6418.indd 7
2013-06-05
9:20:21
8
Getting Started
Remote Control
• • • • • • a • • • • • • POWER : Switches the unit ON or
OFF.
EQ : Chooses sound impressions.
1
Getting Started
? : The button is not available for
any function.
• • • • • • b • • • • • • PRESET/FOLDER W/S :
-- Searches for a folder of MP3/
WMA files. When a CD/ USB
containing MP3/ WMA files in
several folders is being played,
press PRESET/FOLDER W/S
to select the folder you want to
play.
REPEAT(MENU) :
Listens to your tracks/files
repeatedly or randomly.
Cc/vV (Skip/Search) :
-- Skips Fast backward or Forward.
-- Searches for a section within a
track/file.
TUN. -/+ : Selects the radio
station.
Z ENTER : Stops playback.
d/M (Play/Pause) : Starts or
pauses playback.
? : The button is not available for
any function.
-- Choose a preset number for a
radio station.
FUNCTION : Selects the function
and input source.
@MUTE : Mutes the sound.
VOLUME W/S : Adjusts speaker
volume.
Battery Installation
• • • • • • c • • • • • • INFO : Sees informations about
your music. MP3 files often come
with ID3 tags. The tag gives
the Title, Artist, Album or Time
information.
PROGRAM/MEMO :
-- Stores radio stations.
-- Creates a playlist you want to
listen to.
Remove the battery cover on the
rear of the Remote Control, and
insert one (size AAA) battery with
4 and 5 matched correctly.
CM1530-FU_AAUSLLK_ENG_6418.indd 8
2013-06-05
9:20:21
Getting Started
9
Front Panel
1
Getting Started
a 1/!(Power ON/OFF)
b Remote Sensor
f FUNC.
Selects the function and input source.
cOPEN
Uses it when inserting or removing a CD.
EQ
Chooses sound impressions.
dDisplay Window
gPORT.IN
Listens to music from your portable device.
e PRESET -/+
Selects preset numbers.
TUNING -/+
Tunes in the desired radio.
USB Port
Plays the audio files by connecting the USB
device.
d/M (Play/Pause)
Starts or pauses playback.
I (Stop)
Stops playback.
C/V (Skip)
- Searches backward or forward.
- Skips to the previous/next track/file.
Volume Knob
Adjusts volume of speaker.
CM1530-FU_AAUSLLK_ENG_6418.indd 9
2013-06-05
9:20:21
10
Getting Started
Back Panel (Case1)
aPower cord
b FM ANTENNA
1
cSPEAKERS connector (R/L)
Getting Started
Back Panel (Case2)
aPower cord
b FM ANTENNA
cSPEAKERS terminal (R/L)
CM1530-FU_AAUSLLK_ENG_6418.indd 10
2013-06-05
9:20:22
Connecting
Connecting the
speakers to the unit
Case1 : Connecting the
speakers to the unit
Connect the speaker cable plugs to the SPEAKER
connector.
colour
Speaker
Red
Front
White
Front
>>Caution
The speakers contain magnet parts, so colour
irregularity may occur on the TV screen or PC
monitor screen. Please use the speakers far
away from either TV screen or PC monitor.
Antenna Connection
Be sure to fully extend the FM wire antenna.
2
Connecting
Connect the red cable plug to the R connector and
the the white one to the L connector.
11
Case2 : Attaching the
speakers to the unit
To connect the cable to the unit, press each plastic
finger pad to open the connection terminals on the
unit. Insert the wire and release the finger pad.
Connect the black stripe of each wire to the
terminals marked - (minus) and the other end to
the terminals marked + (plus).
CM1530-FU_AAUSLLK_ENG_6418.indd 11
2013-06-05
9:20:22
12
Connecting
Optional Equipment
Connection
PORT. IN Connection
Connect an output (earphone or line out) of
portable device (MP3 or PMP etc) to the
PORT. IN connector.
USB Connection
Connect the USB Memory (or MP3 player, etc.) to
the USB port on the front of the unit.
2
Connecting
MP3 player,etc..
,,Note
yy Removing the USB Device from the unit
1. Choose a different function/mode or
press Z ENTER on the remote control
or I on the unit twice in a row.
2. Remove the USB device from the unit.
CM1530-FU_AAUSLLK_ENG_6418.indd 12
2013-06-05
9:20:23
3Operating
Operating
Basic Operations
CD/ USB Operations
1. Insert the disc by pressing OPEN or connect the
USB device to the USB port.
2. Select the CD or USB function by pressing
FUNCTION on the remote control or FUNC. on
the unit.
3. Select a track/file you want to play by pressing
Cc/vV on the remote control or
C/V on the unit.
To
Stop
Selecting a folder
1. In stop status,press PRESET/FOLDER W/S on
the remote control repeatedly until a desired
folder appears.
2.Press d/M to play it. The first file of folder will
be played. (During playback, if you selecting a
folder you want, this step is not necessary.)
,,Note
yy USB and CD Folders/Files are recognized as
below.
Directory
*ROOT
File
File_04
File_05
During playback, press vV on
the remote control or V on the
unit to go to the next track/file.
Playing less than 2 seconds, press
Skipping to
Cc on the remote control
the next/
or C on the unit to go to the
previous
previous track/file.
track/file
Playing after 3 seconds, press
Cc on the remote control
or C on the unit to go to the
beginning of the track/file.
Press and hold Cc/vV
Searching on the remote control or C/
for a section V on the unit during playback
within a track and release it at the point you want
to listen to.
Press REPEAT(MENU) on the
remote control repeatedly, the
Playing
display will be changed in the
repeatedly or following order.
randomly
RPT1 -> RPT DIR(MP3/WMA only)
-> RPT ALL -> RANDOM -> OFF
3
File_03
Operating
Playback
Pause
Do this
Press Z ENTER on the remote
control or I on the unit.
Press d/M.
During playback, press d/M.
13
File_06
File_07
File_08
File_09
File_10
File_01
File_02
yy Files and folders will be presented in order
recorded and may be presented differently
according to the record circumstances.
yy *ROOT : the first screen you can see when a
computer recognize the USB is “ROOT”
yy Folders will be presented as the following
order;
FAT(USB) : FILE_01 -> FILE_02 -> FILE_03 ->
FILE_04 -> FILE_05 -> FILE_06 -> FILE_07
-> FILE_08 -> FILE_09 -> FILE_10
CD : FILE_01 -> FILE_02 -> FILE_03 ->
FILE_04 -> FILE_05 -> FILE_08 -> FILE_09
-> FILE_06 -> FILE_07 -> FILE_10
,,Note
yy The DTS is not supported.
yy If you play back disc with scratches /
imperfections on surface you may
experience some noise or possible failure to
read or detect disc.
CM1530-FU_AAUSLLK_ENG_6418.indd 13
2013-06-05
9:20:23
14
Operating
Other Operations
Programmed Playback
The program function enables you to store your
favourite files from any disc or USB device.
A program can contain 20 tracks/files.
1. Insert a CD or a USB and wait for it to be
ordered.
2.Press PROGRAM/MEMO on the remote control
in stop status.
3.Press Cc/vV to select a track/file.
3
4.Press PROGRAM/MEMO again to save.
5. Repeat steps 3-4 to select a next track/file.
Displaying file information
(ID3 TAG)
While playing an MP3 file containing file
information, you can display the information by
pressing INFO.
Turn off the sound temporarily
Press @MUTE on the remote control to mute
your sound.
You can mute your sound, for example, to answer
the telephone, the mute symbol “ ” is displayed in
the display window.
To cancel it, press @MUTE again or change the
volume level.
Operating
6.Press d/M to play the programmed music
tracks/files.
7. To clear your selection, press Z on the remote
twice.
,,Note
The programs are also cleared when the disc
or USB device is removed, the unit is powered
off or the function is switched to others.
CM1530-FU_AAUSLLK_ENG_6418.indd 14
2013-06-05
9:20:23
Operating
Radio Operations
Listening to the radio
1.Press FUNCTION on the remote control or
FUNC. on the unit until FM appears in the
display window.
The last received station is tuned in.
2. Auto tuning : Press TUN.-/+ on the remote
control or TUNING -/+ on the unit for about 2
seconds until the frequency indication starts
changing, then release. scanning stops when
the unit tunes in a station.
Manual tuning: Press TUN.-/+ on the remote
control or TUNING -/+ on the unit repeatedly.
Improving poor FM reception
Press d/M on the remote control. This will change
the tuner from stereo to mono. Then the reception
will be better than before.
CM1530-FU_AAUSLLK_ENG_6418.indd 15
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure to turn down the volume.
1.Press FUNCTION on the remote control or
FUNC. on the unit until FM appears in the
display window.
2. Select the desired frequency by pressing
TUN.-/+ on the remote control or TUNING -/+
on the unit.
3.Press PROGRAM/MEMO. A preset number will
blink in the display window.
4.Press PRESET/FOLDER W/S to select the
preset number you want.
5.Press PROGRAM/MEMO. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESET/FOLDER W/S.
3
Operating
3. Adjust the volume by using VOLUME W/S on
the remote control or rotate Volume knob on
the unit.
15
Deleting all the saved stations
1. Press and hold PROGRAM/MEMO for two
seconds. “ERASE” will blink in the display
window.
2.Press PROGRAM/MEMO to erase all saved radio
stations.
2013-06-05
9:20:23
16
Operating
Sound adjustment
Setting the surround mode
This system has a number of pre-set surround
sound fields. You can select a desired sound mode
by using EQ.
The displayed items for the Equalizer may be
different depending on sound sources and effects.
3
Operating
On Display
Description
AUTO EQ
Sets the sound equalizer on the
mode that is the most similar to
the genre which is included in
the MP3 ID3 tag of song files.
POP
CLASSIC
JAZZ
ROCK
This program lends an
enthusiastic atmosphere to the
sound, giving you the feeling
you are at an actual pop,classic,
jazz or rock concert.
BYPASS
You can enjoy the sound
without equalizer effect.
BASS BLAST
(BASS)
Reinforces the treble, bass and
surround sound effect.
Listening to music
from your external
device
The unit can be used to play the music from many
types of external device. (Refer to the page 12)
1. Connect the external device to the PORT. IN
connector of the unit.
2. Turn the power on by pressing 1/!.
3. Select the PORTABLE function by pressing
FUNC. on the unit.
4. Turn the external device and start playing
music.
Auto Power Down
This unit will be power itself off to save electronic
consumption in the case main unit is not
connected to external device and is not used for 25
minutes. So does this unit after 6 hours since Main
unit has been connected to other device using
analogue input.
,,Note
Maybe you need to reset the surround mode,
after switching the input, sometimes even
after the sound track changed.
CM1530-FU_AAUSLLK_ENG_6418.indd 16
2013-06-05
9:20:23
Troubleshooting
17
Troubleshooting
Problem
Cause & Correction
yy The power cord is not plugged in. Plug in the power cord.
No Power.
yy Check whether electricity failed. Check the condition by operating other
electronic devices.
yy Check whether you select right function. Press FUNC. and check the selected
function.
No sound.
yy Speaker cables are not connected correctly. Connect the speaker cables
correctly.
yy The volume is set to minimum. Use the Volume Knob to adjust the volume.
yy An unplayable disc is inserted. Insert a playable disc.
The unit does not start
playback.
yy No disc is inserted. Insert a disc.
yy The disc is dirty. Clean the disc. (Refer to the page 20)
yy The antenna is positioned poorly. Adjust its position.
yy The signal strength of the radio station is too weak. Tune to the station
manually.
Radio stations cannot be
tuned in properly.
yy No stations have been preset or preset stations have been cleared (when
being tuned by scanning preset channels). Preset some radio stations, see
page15 for details.
4
Troubleshooting
yy The disc is inserted upside down. Place the disc with the label or printed side
facing upwards.
yy The remote control is not pointed at the remote sensor of the unit. Point the
remote control at the remote sensor of the unit.
yy The remote control is too far from the unit. Operate the remote control within
about 16 ft (5 m).
The remote control does
yy There is an obstacle in the path of the remote control and the unit. Remove
not work properly.
the obstacle.
yy The battery in the remote control is exhausted. Replace the battery with new
one.
CM1530-FU_AAUSLLK_ENG_6418.indd 17
2013-06-05
9:20:23
18
Appendix
Trademarks and
Licenses
5
Appendix
CM1530-FU_AAUSLLK_ENG_6418.indd 18
2013-06-05
9:20:23
Appendix
19
Specifications
General
Power supply
Refer to the main label.
Power consumption
Refer to the main label.
Net Weight
1.6 kg
External dimensions (W x H x D)
150 X 200 X 212 mm
Operating conditions Temperature 5 °C to 35 °C (41 °F to 95 °F)
Operating humidity
5 % to 85 %
Bus Power Supply
DC 5 V 0 500 mA
Inputs
PORT. IN
0.7 Vrms (3.5 mm stereo jack)
Tuner
FM Tuning Range
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
Amplifier
Output Power
5W+5W
T.H.D
10 %
5
Appendix
CD
Frequency Response
40 Hz to 20 kHz
Signal-to-noise ratio
70 dB
Dynamic range
55 dB
Speakers
Type
1way 1speaker
Impedance
6Ω
Rated Input Power
5W
Max. Input Power
10 W
Net Dimensions (WxHxD)
132 X 200 X 141 mm
Net Weight(1EA)
0.8 kg
yy Design and specifications are subject to change without notice.
CM1530-FU_AAUSLLK_ENG_6418.indd 19
2013-06-05
9:20:23
20 Appendix
Maintenance
Handling the Unit
Notes on Discs
Handling Discs
Never stick paper or tape on the disc.
When shipping the unit
Storing Discs
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Keeping the exterior surfaces clean
Cleaning Discs
Do not use volatile liquids such as insecticide spray
near the unit.
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available cleaners,
or anti-static spray intended for old vinyl records.
Wiping with strong pressure may damage the
surface.
Do not leave rubber or plastic products in contact
with the unit for a long period of time.
Cleaning the unit
5
Appendix
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
Maintaining the Unit
The unit is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
For details, please contact your nearest authorized
service centre.
CM1530-FU_AAUSLLK_ENG_6418.indd 20
2013-06-05
9:20:23
CM1530-FU_AAUSLLK_ENG_6418.indd 21
2013-06-05
9:20:23
CM1530-FU_AAUSLLK_ENG_6418.indd 22
2013-06-05
9:20:23
Download PDF