LG CM9730 Owner’s Manual

Add to my manuals
34 Pages

advertisement

LG CM9730 Owner’s Manual | Manualzz
ENGLISH
OWNER’S MANUAL
SUPER POWER
MINI Hi-Fi SYSTEM
Please read this manual carefully before operating your set and retain it
for future reference.
CM9730 (CM9730, CMS9730F)
CM9730-FB_DAUSLLS_ENG.indd 1
2013-03-21 �� 2:04:00
1
2
Getting Started
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with
arrowhead symbol within an
equilateral triangle is intended to
alert the user to the presence of
uninsulated dangerous voltage
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service centre.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not
try to open the enclosure.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing the
product on a bed, sofa, rug or other similar surface.
This product should not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, should be placed on the
apparatus.
CM9730-FB_DAUSLLS_ENG.indd 2
2013-03-21 �� 2:04:01
Getting Started
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
1
Getting Started
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
centre. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
3
You have to set the disc format option to [Mastered]
in order to make the discs compatible with the LG
players when formatting rewritable discs. When
setting the option to Live File System, you cannot
use it on LG players.
(Mastered/Live File System : Disc format system for
Windows Vista)
yy The appliance is not intended for use by young
children or infirm persons without supervision.
yy Young Children should be supervised to ensure
that they do not play with appliance.
yy If the appliance is supplied from a cord extension
set or an electrical portable outlet device, the
cord extension set on electrical portable outlet
device must be positioned so that it is not
subject to splashing or ingress of moisture.
CM9730-FB_DAUSLLS_ENG.indd 3
2013-03-21 �� 2:04:01
4
Table of Contents
Table of Contents
1
Getting Started
3Operating
2
Safety Information
6
Unique Features
6Accessories
7
Playable file Requirement
7
– MP3/WMA music file requirement
7
– Compatible USB Devices
7
– USB device requirement
8
Remote control
10 Front panel
12 Rear panel
17
17
17
2Connecting
22
22
13
13
13
14
15
15
15
16
16
Connecting to speakers
– Attaching the high channel speakers
to the unit
– Attaching the low channel speakers to
the unit
– Attaching the speaker light cables to
the unit
Optional Equipment Connection
– AUX IN Connection
– PORT. IN Connection
– USB Connection
– Antenna Connection
CM9730-FB_DAUSLLS_ENG.indd 4
18
19
19
20
20
21
24
24
24
24
24
25
25
25
25
25
25
25
26
26
26
27
27
28
28
28
28
Basic Operations
– CD/USB Operations
– Selecting a folder and
an MP3/WMA file
– Deleting an MP3/WMA file
Playback effect
– SMART DJ playback
– DJ effect
– AUTO DJ playback
– JUKE BOX Playback
(Program play)
Using a Bluetooth® wireless technology
– Listening to music stored on the
Bluetooth devices
Radio Operations
– Listening to the radio
– Improving poor FM reception
– Presetting the Radio Stations
– Deleting all the saved stations
Other Operations
– Turn off the sound temporarily
– Displaying file information
(ID3 TAG)
– DEMO
– Using Microphone
– Switching on and off the speaker light
– Auto Power Down
Sound adjustment
– Setting the surround mode
– Setting the USER EQ
Setting the Clock
– Using your player as an alarm clock
– Sleep Timer Setting
– Dimmer
Advanced Operations
– Recording to USB
2013-03-21 �� 2:04:01
Table of Contents
4Troubleshooting
5
1
30Troubleshooting
30 – General
5Appendix
31 Trademarks and Licenses
32 General specifications
33Maintenance
33 – Notes on Discs
33 – Handling the Unit
2
3
4
5
CM9730-FB_DAUSLLS_ENG.indd 5
2013-03-21 �� 2:04:01
6
Getting Started
Unique Features
1
Bluetooth®
Accessories
Please check and identify the supplied accessories.
Getting Started
Listens to music stored on your bluetooth device.
Portable In
Listens to music from your portable device. (MP3,
Notebook, etc)
Remote Control (1)
Batteries (2)
FM Antenna (1)
Non skid pads (4)
Playback effects
Listens to music with various sound and playback
effects.
USB Direct Recording
Records music to your USB device.
CM9730-FB_DAUSLLS_ENG.indd 6
2013-03-21 �� 2:04:01
Getting Started
Playable file
Requirement
MP3/WMA file compatibility with this unit is limited
as follows.
yy Sampling frequency : within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
yy Bit rate : within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
Compatible USB Devices
yy MP3 Player : Flash type MP3 player.
yy USB Flash Drive :
Devices that support USB2.0 or USB1.1.
yy The USB function of this unit does not support
all USB devices.
USB device requirement
yy Devices which require additional program
installation when you have connected it to a
computer, are not supported.
1
Getting Started
MP3/WMA music file
requirement
7
yy Do not extract the USB device while in operation.
yy Maximum files : Under 999
yy For a large capacity USB, it may take longer than
a few minute to be searched.
yy Maximum folders : Under 99
yy To prevent data loss, back up all data.
yy File extensions : “.mp3”/ “.wma”
yy CD-ROM file format : ISO 9660/ JOLIET
yy If you use a USB extension cable or USB hub, the
USB device is not recognized.
yy We recommend that you use Easy-CD Creator,
which creates an ISO 9660 file system.
yy Using NTFS file system is not supported. (Only
FAT(16/ 32) file system is supported.)
yy This unit is not supported when the total
number of files is 1 000 or more.
yy External HDD, Card readers, Locked devices, or
hard type USB devices are not supported.
yy USB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
yy Some USB may not work with this unit.
CM9730-FB_DAUSLLS_ENG.indd 7
2013-03-21 �� 2:04:02
8
Getting Started
Remote control
• • • • • • • • • • a • • • • • • • • • •
1 (Power) : Switches the unit ON or OFF.
B (Open/Close) : Opens and closes the disc tray.
PRESET.FOLDER W/S :
1
Getting Started
-- Searches for a folder of MP3/WMA files. When
a CD/USB containing MP3/WMA files in several
folders is being played, press PRESET.FOLDER
W/S to select the folder you want to play.
-- Chooses a preset number for a radio station.
FUNCTION : Selects the function and input source.
MUTE @ : Mutes the sound.
VOL +/- : Adjusts speaker volume.
TUNER MEMORY :
-- Stores radio stations.
-- Deletes all the saved stations.
USB REC : USB direct recording.
SLEEP : Sets the system to turn off automatically at
a specified time.
(Dimmer : The display window will be darkened by
half.)
Battery Installation
Remove the battery cover on the rear of the
Remote Control, and insert two (size AAA) batteries
with 4 and 5 matched correctly.
CM9730-FB_DAUSLLS_ENG.indd 8
2013-03-21 �� 2:04:02
Getting Started
9
• • • • • • • • • • c • • • • • • • • • •
REPEAT (MENU) : Listens to your tracks/files
repeatedly or randomly.
0 to 9 numerical buttons : Selects numbered tracks,
files, or preset number.
TUNING-/+ : Selects the radio stations.
INFO : Sees informations about your music. An MP3
file often come with ID3 tag. The tag gives the Title,
Artist, Album or Time information.
C/V (Skip/Search) :
-- Skips Fast backward or Forward.
-- Searches for a section within a track/file.
? : The button is not available for any function.
Z ENTER :
• • • • • • • • • • d • • • • • • • • • •
-- Stops playback or recording.
CLOCK : For setting the clock and checking the
time.
-- Cancels DELETE function.
-- Starts or pauses playback.
TIMER : With the TIMER function you can turn CD,
USB play and TUNER reception on or off at a desired
time.
-- Selects STEREO/MONO.
SET : Confirms the setting.
SOUND EFFECT : Chooses sound impressions.
SMART DJ : Selects SMART DJ mode. (For more
information refer to the page 19)
d/M (Play/Pause) :
AUTO DJ : Selects the AUTO DJ mode. (For more
information refer to the page 20)
JUKE BOX :
DELETE :
-- Selects JUKE BOX mode.
-- Deletes MP3/WMA files.
-- Makes your favourites list.
-- Deletes a song on JUKE BOX list.
EFFECT LEVEL +/- : Adjusts SMART DJ effect sound
level.
CM9730-FB_DAUSLLS_ENG.indd 9
1
Getting Started
• • • • • • • • • • b • • • • • • • • • •
2013-03-21 �� 2:04:02
10
Getting Started
Front panel
a
1
d
i
j
e f
g
h
Getting Started
bc
k
aSMART DJ
SPK LIGHT / DEMO
- Changes lighting effects.
- Shows demo.
Selects SMART DJ mode. (For more information
refer to the page 19)
b1/!(Power)
cDJ EFFECT
Selects DJ effect. (For more information refer to
the page 20)
dDisplay window
eBASS BLAST
Selects the BASS BLAST or BYPASS sound
directly.
fCLOCK
For setting the clock and checking the time.
TIMER
With the TIMER function you can turn CD, USB
play and TUNER reception on or off at a desired
time.
SET
Confirms the setting.
CM9730-FB_DAUSLLS_ENG.indd 10
l
gUSB 1/2 Port
You can play or record sound files by
connecting the USB device.
USB REC
Records to USB.
hENTER
Selects a folder when searching a file.
iAUTO DJ
Selects the AUTO DJ mode. (For more
information refer to the page 20)
jBASS/MIDDLE/TREBLE
Adjusts the sound level when setting USER EQ.
kLG EQ
Chooses sound impressions.
lPORT. IN jack
MIC jack
MIC VOL.
2013-03-21 �� 2:04:03
Getting Started
m
n
p q
o
r
11
s
1
Getting Started
t
u
v
w x
mDJ EFFECT CONTROL
sMULTI JOG, FILE SEARCH
y
- Sets the clock time.
nUSB (USB SKIP)
- Selects a folder and a file on CD/USB function.
tJUKE BOX
Makes a sound on DJ effect mode.
Selects the USB 1/2 function.
oT
- Makes your favourites list.
- Starts or pauses playback.
- Switches on and off JUKE BOX.
- Selects Stereo/Mono.
DJ LEVEL
I
Selects DJ effect level between low, middle, and
high.
Stops playback or cancels DELETE function.
uCD
Y/U
- Skips Fast backward or Forward.
Selects the CD function.
- Searches for a section within a track/file.
vDisc tray
MASTER VOLUME
wR (Open/Close)
Adjusts speaker volume.
xTUNER
pUSER EQ
Controls sound register.
- FOLDER
Moves to folder and file in selection mode.
- DELETE
Deletes MP3/WMA files. (USB only)
Deletes a song on JUKE BOX list.
qBluetooth indicator
Lights up when bluetooth device is connected
to the unit.
rBLUETOOTH/AUX/PORT.IN
Selects BLUETOOTH, AUX, or PORT. IN function.
CM9730-FB_DAUSLLS_ENG.indd 11
Selects the TUNER function.
yFILE MANAGEMENT
2013-03-21 �� 2:04:03
12
Getting Started
Rear panel
a
1
Getting Started
b c
d
e
a Power cord
>>Caution
f
g
b AUX IN connectors (L/R)
c ANTENNA (FM)
yy Connect the power cord to wall outlet
directly if possible. Or when you use an
extension cable, it is highly recommended
to use an extension cable of 110 V / 15 A
or 230 V / 15 A, otherwise the unit may not
operate properly because of the lack of
power supply.
d SPEAKER LIGHT
yy Do not overload the extension cord with
excessive electrical load.
f Cooling fan
CM9730-FB_DAUSLLS_ENG.indd 12
e RIGHT SPEAKER
LOW CHANNEL
Connects banana plugs.
HIGH CHANNEL
Connects speaker’s cables.
g LEFT SPEAKER
LOW CHANNEL
Connects banana plugs to the speaker
terminal.
HIGH CHANNEL
Connects speaker’s cables.
2013-03-21 �� 2:04:04
Connecting
13
Connecting to speakers
Connect the black stripe of each wire to the terminals marked - (minus) and the other end to the terminals
marked + (plus).
Right speaker
Grey
Red
2
Speaker light
cable
Banana
plug
Speaker light
cable
Connecting
Speaker
cable
Speaker
cable
Banana
plug
Blue
White
: Red
: Black
Left speaker
Attaching the high channel
speakers to the unit
Attaching the low channel
speakers to the unit
1. Loosen the knob by turning it counter
clockwise.
1. Remove a protective cab.
2. Insert the bare part of the wire into the hole in
side of each terminal.
2. Insert the banana plug into the corresponding
terminal.
3. Tighten the knob by turning it clockwise to
secure the wire.
Colour
HIGH CHANNEL
Red
RIGHT SPEAKER
White
LEFT SPEAKER
CM9730-FB_DAUSLLS_ENG.indd 13
Colour
LOW CHANNEL
Grey
RIGHT SPEAKER
Blue
LEFT SPEAKER
2013-03-21 �� 2:04:05
14
Connecting
>>Caution
yy Do not try to lift the speaker alone. It needs
two persons to lift the speaker. Otherwise
it may result in the speaker malfunction
and cause personal injury and/or property
damage.
2
Attaching the speaker light
cables to the unit
To connect the speaker light cable to the unit,
insert the cable to SPEAKER LIGHT connectors on
the unit.
yy When you connect the speakers to the unit,
make sure to connect the speaker’s cable
and plug to the corresponding speaker
terminal.
Connecting
yy The speakers must be placed at a distance
of about 20 cm from the unit for preventing
the vibration caused by the speakers.
20 cm
20 cm
yy Check the volume level before playing
music to prevent infirm, child, and pregnant
women from being shocked by the sudden
and loud sound from the unit.
yy Do not use the unit in a limited space.
It may damage a person’s hearing. It is
recommended to use it in a wide space.
yy Be careful to make sure children not to put
their hands or any objects into the *speaker
duct.
*Speaker duct: A hole for plentiful bass
sound on speaker cabinet (enclosure).
>>Caution
yy Make sure arrows on the ends of cables are
facing upwards.
yy Make sure to connect the cables to
connectors tightly on the unit.
yy The speakers contain magnet parts, so
Colour irregularity may occur on the TV
screen or PC monitor screen. Please use the
speakers far away from either TV screen or
PC monitor.
yy Make sure to install the speaker with other
people in order to prevent it from falling
and causing injuries to the installer.
CM9730-FB_DAUSLLS_ENG.indd 14
2013-03-21 �� 2:04:05
Connecting
Optional Equipment
Connection
15
PORT. IN Connection
Connect an output (earphone or line out) of
portable device (MP3 or PMP etc) to the
PORT. IN connector.
AUX IN Connection
Connect an output of auxiliary device(Camcoder,
TV, Player, etc) to the AUX IN (L/R) connector.
2
Connecting
If your device has only one output for audio(mono),
connect it to the left (white) audio jack on the unit.
Portable cable
Audio cable
MP3 player etc.
Listening to music from your
portable player or external device
The unit can be used to play the music from many
types of portable player or external device.
1. Connect the portable player to the PORT. IN
connector of the unit.
DVD, Blu-ray player etc.
Or
Connect the external device to the AUX IN
connector of the unit.
2. Turn the power on by pressing 1/!.
3. Select the PORTABLE or AUX function by
pressing FUNCTION on the remote control or
BLUETOOTH/AUX/PORT.IN on the unit.
4. Turn on the portable player or external device
and start it playing.
CM9730-FB_DAUSLLS_ENG.indd 15
2013-03-21 �� 2:04:06
16
Connecting
USB Connection
Antenna Connection
Connect a USB device (or MP3 player, etc.) to the
USB ports on the unit.
Connect the supplied FM antenna for listening to
the radio.
USB device
Connect the FM wire antenna to the FM antenna
connector.
2
Connecting
FM antenna
,,Note
Removing the USB device from the unit :
1. Choose a different function/mode or
press Z ENTER on the remote control
or I on the unit twice in a row.
2. Remove the USB device from the unit.
,,Note
Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep it
horizontal.
CM9730-FB_DAUSLLS_ENG.indd 16
2013-03-21 �� 2:04:07
3Operating
Operating
Basic Operations
CD/USB Operations
1. Insert the disc by pressing B(R) or connect
the USB device to the USB port.
2. Select the CD or USB function by pressing CD or
USB on the unit or FUNCTION on the remote
control.
To
(1) By using C/V buttons :
Press C/V to go to the
next track/file or to return to the
Skipping to
beginning of the current track/file.
the next/
Press C twice briefly to step
previous
back to the previous track/file.
track/file
(2) By using FILE SEARCH knob :
Rotate FILE SEARCH on the unit
and press d/M to play the track/
file.
Press REPEAT(MENU) on the
Playing
remote control repeatedly. Refer
repeatedly or
to the note for details about the
randomly
display change.
CM9730-FB_DAUSLLS_ENG.indd 17
,,Note
yy The display changes in the following order.
USB
MP3/WMA CD
Audio CD
REPEAT TRK
REPEAT TRK
REPEAT TRK
REPEAT *DIR
REPEAT DIR
-
REPEAT ALL
REPEAT ALL
REPEAT ALL
RANDOM
RANDOM
RANDOM
OFF
OFF
OFF
*DIR : Directory
yy When you play JUKE BOX list, only REPEAT
TRACK and REPEAT ALL are available.
yy Even after restarting the unit or switching
one function to another, you can listen to
music from the point where it’s last been
played.
yy The next file name is displayed every 30
seconds. (Except RANDOM play, AUTO DJ
RANDOM play, the last file of playlist, etc.)
3
Operating
Do this
Press Z ENTER on the remote
Stop
control or I on the unit.
Press d/M on the remote control
Playback
or T on the unit.
Press d/M on the remote control
Pause
or T on the unit during playback.
Searching Press C/V on the remote
for a section control or Y/U on the unit
within a track/ during playback and release it at
file
the point you want to listen to.
Selecting Press 0 to 9 numerical buttons on
a track/file the remote control to go to the
directly
desired file or track directly.
During playback,
17
yy If you leave the disc tray open for 5 minutes,
it will close automatically.
Selecting a folder and
an MP3/WMA file
On the unit
1.Press FOLDER and rotate FILE SEARCH until a
desired folder appears.
2.Press ENTER and rotate FILE SEARCH until a
desired file appears. Press T to play it.
On the remote control
1.Press PRESET.FOLDER W/S repeatedly until a
desired folder appears.
2.Press d/M to play it. The first file of folder will
play.
2013-03-21 �� 2:04:07
18
Operating
,,Note
yy CD / USB Folders/Files are recognized as
below.
Deleting an MP3/WMA file
You can delete file, folder or format by pressing
DELETE. This function is supported only in stop
status. (USB only)
1. -Select the file you want to delete and press
DELETE.
-Select the folder you want to delete by
pressing FOLDER and rotating FILE SEARCH
and press DELETE.
-Press and hold DELETE to format the USB
device.
Or
Press DELETE repeatedly during selecting the
MP3/WMA file.
3
Operating
The display changes in the following order.
- DEL FILE? : Deletes file
- DEL FOLDER : Deletes folder
- FORMAT? : Formats USB
2. To delete file/folder or format, press d/M on the
remote control or press T on the unit.
yy If there is no file in a folder, the folder will
not appear.
yy Folders will be presented as the following
order;
ROOT FOLDER 1 FOLDER 3 FOLDER
7 FOLDER 8 FOLDER 5 FOLDER 6
yy File will be played from $ file No.1 to $ file
No.14 one by one.
yy Files and folders will be presented in order
recorded and may be presented differently
according to the record circumstances.
3. If you want to exit the current mode, press
Z ENTER on the remote control or press I on
the unit.
>>Caution
yy Do not extract the USB device during
operation. (play, delete, etc.)
yy Regular back up is recommended to
prevent data loss.
yy The delete function may not be supported
according to the USB status. (lock, etc.)
yy *ROOT : The first screen you can see when a
computer recognize the USB is “ROOT”.
CM9730-FB_DAUSLLS_ENG.indd 18
2013-03-21 �� 2:04:07
Operating
Playback effect
,,Note
yy Find sound and playback effects below.
Description
Auto effect
Auto effect blends
various sound effects
to fit the mood
automatically. It includes
flanger, phaser, delay,
and chorus.
Cross fade
It playbacks to
seamlessly fade from
one song into the
beginning of another.
Back spin
It playbacks a section of
music fast in reverse.
Loop
To cancel it, press SMART DJ repeatedly until
“SMART DJ OFF” appears on the display window.
You can listen to music as usual.
It repeats a section of
music.
Beat box
It inserts a beat box
during playback.
Adjusting the effect level
Voice
sampling
It inserts a sound during
playback.
SMART DJ playback
SMART DJ plays music with various sound and
playback effects : auto effect, cross fade, back spin,
loop, beat box, and voice sampling.
It plays repeatedly all the music in the USB device
and gives various effects randomly.
You can enjoy it with 2 types of genre : ELECTRO
and HOUSE. Press SMART DJ repeatedly. The
display window changes each time you press
SMART DJ as followings : SMART DJ OFF -> SMART
DJ ELECTRO -> SMART DJ HOUSE.
You can adjust SMART DJ effect sound level
between LOW, MIDDLE, and HIGH. As the effect
level moves from LOW to HIGH, SMART DJ effect
appears more frequently and makes the sound feel
more powerful.
On SMART DJ mode, press DJ LEVEL repeatedly
on the unit or EFFECT LEVEL +/- on the remote
control. The display window changes as followings :
MIDDLE -> HIGH -> LOW.
3
Operating
Effect
The unit supports various sound and playback
effects : SMART DJ, AUTO DJ, DJ EFFECT, and JUKE
BOX playback.
19
yy SMART DJ is supported only on USB
function.
yy You can identify the effect by hearing the
sound, not by display window.
yy It is recommended to play only electronic
and house music on SMART DJ mode.
SMART DJ is optimized to enjoy electronic
and house music.
yy If the function changes to the others or turn
off and on the unit on SMART DJ mode,
SMART DJ will be turned off.
yy If you record your music you are listening
to on SMART DJ mode, SMART DJ will be
turned off and the music will be recorded
without any sound effect.
yy If SMART DJ is turned off, you should turn it
on again to enjoy the effect.
yy It is impossible to operate SMART DJ and
AUTO DJ at the same time. If you select one,
another will be turned off automatically.
CM9730-FB_DAUSLLS_ENG.indd 19
2013-03-21 �� 2:04:08
20 Operating
DJ effect
AUTO DJ playback
It allows you to enjoy DJ effect such as scratch
sound and several kinds of voices yourself.
Auto DJ blends the end of one song into the
beginning of another for seamless playback.
It equalizes volume across tracks/files for
uninterrupted playback.
1.Press DJ EFFECT on the unit. The display
window changes each time you press DJ
EFFECT as followings : OFF -> SCRATCH ->
VOICE 1 -> VOICE 2 -> VOICE 3.
Display
Window
Description
SCRATCH
You can hear two kinds of
scratch sound depending on
the direction in which you turn
DJ EFFECT CONTROL.
VOICE
1/2/3
You can hear only one kind of
the sound regardless of the
direction in which you turn DJ
EFFECT CONTROL.
3
Operating
2.Turn DJ EFFECT CONTROL clockwise or
counterclockwise during playback.
To cancel it, press DJ EFFECT until “DJ EFFECT OFF”
appears on the display window.
Press AUTO DJ on the remote control or unit
repeatedly, the display changes as followings.
RANDOM (AUTO DJ RANDOM) -> REPEAT ALL
(AUTO DJ SEQUENTIAL) -> (AUTO DJ OFF)
Mode
OFF
Display
Window
(AUTO DJ OFF)
Description
-
RANDOM
RANDOM
(AUTO DJ
RANDOM)
The music is
played randomly
on this mode.
REPEAT
REPEAT ALL
(AUTO DJ
SEQUENTIAL)
The music is
played repeatedly
on this mode.
,,Note
yy It is not supported on the AUTO DJ mode to
search for a section within a track/file or to
play repeatedly or randomly.
yy During AUTO DJ mode, it is not available to
press PRESET.FOLDER W/S on the remote
control or FOLDER on the unit.
yy If you move to other functions or stop the
music using I on the unit (or Z ENTER on
the remote control) on AUTO DJ mode,
AUTO DJ function will be disable.
yy AUTO DJ function is not supported in the
music file whose length is less than 60
seconds.
yy During recording, AUTO DJ function is not
available.
yy Only AUTO DJ SEQUENTIAL is selected when
played JUKE BOX list.
CM9730-FB_DAUSLLS_ENG.indd 20
2013-03-21 �� 2:04:08
Operating
JUKE BOX Playback
(Program play)
JUKE BOX function enables you to store your
favourite tracks/files from any disc or USB device.
Up to 100 tracks/files can be stored for each device.
Making JUKE BOX list
It is supported only on stop status.
1. Press and hold JUKE BOX to enter the edit
mode.
2. Select a track/file by pressing C/V on the
remote control or by turning FILE SEARCH on
the unit.
3.Press JUKE BOX to save the track/file.
5.Press JUKE BOX once again.
To play the JUKE BOX list, press d/M after you
make the list.
Enjoying JUKE BOX
Press JUKE BOX twice on stop status. “JUKE BOX
ON” appears on the display window. To play JUKE
BOX list, press d/M on the remote control or T
on the unit.
Deleting JUKE BOX list
Deleting function is worked only on the edit mode.
Refer to “Making JUKE BOX list” step 1.
To delete each song on JUKE BOX list, press DELETE
while a song is selected.
To delete all the songs on JUKE BOX list, press Z
ENTER on the remote control or I on the unit.
,,Note
yy To check the status of JUKE BOX, press JUKE
BOX once. You can also check it by the word
“PROG.” on the display window.
yy If there is no JUKE BOX list, “JUKE BOX NONE”
appears on the display window when you
press JUKE BOX.
yy JUKE BOX is switched off in the case below.
-- Changing the function to the others.
-- Turning off and on the unit.
-- Operating the numeric buttons on the
remote control.
-- Playing a file by using FOLDER and MULTI
JOG.
3
Operating
4. Repeat steps 2 to 3 to store the other tracks/
files.
21
yy JUKE BOX list is cleared in the case below.
-- Removing the disc or the USB device.
-- Deleting or recording music files in the
USB device.
To cancel it, press JUKE BOX twice. “JUKE BOX OFF”
appears on the display window.
CM9730-FB_DAUSLLS_ENG.indd 21
2013-03-21 �� 2:04:08
22 Operating
Using a Bluetooth®
wireless technology
About Bluetooth®
Bluetooth® is wireless communication technology
for short range connection.
The available range is within 10 meters. (The sound
may be interrupted when the connection interfered
by the other electronic wave or you connect the
bluetooth in the other rooms.)
3
Operating
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges. A
mobile phone with Bluetooth® wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth® wireless technology.
Available Devices : Mobile phone, MP3, Laptop,
PDA.
Bluetooth® Profiles
In order to use Bluetooth® wireless technology,
devices must be able to interpret certain profiles.
This unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
Listening to music stored on
the Bluetooth devices
Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed,
it does not need to be performed again.
1. Select the Bluetooth function by using the
FUNCTION or BLUETHOOTH/AUX/PORT.IN.
“BT READY” appears on the display window.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device. Your unit appears as “LG AUDIO CM9730”.
3. Enter the PIN code.
PIN code : 0000
4. When this unit is successfully connected with
your Bluetooth device, “PAIRED” will appear on
the display window and bluetooth indicator will
be lit up.
,,Note
Depending on the Bluetooth device type,
some device have a different pairing way.
5. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
,,Note
yy Sound from the main set can be distorted
if you raise the volume of Bluetooth device
up to two-thirds or more.
yy When you use the bluetooth function,
adjust the volume of a bluetooth device to
a proper level to listen to.
CM9730-FB_DAUSLLS_ENG.indd 22
2013-03-21 �� 2:04:08
Operating 23
,,Note
yy The sound may be interrupted when
the connection interfered by the other
electronic wave.
yy You cannot control the Bluetooth device
with this unit.
yy Pairing is limited one Bluetooth device per
one unit and multi-pairing is not supported.
yy Although the distance between your
Bluetooth and the set is less than 10 m,
there are obstacles between both, your
Bluetooth device cannot be connected.
yy Depending on the type of the device,
you may not be able to use the Bluetooth
function.
yy The electrical malfunction due to devices
using same frequency such as Medical
equipment, Microwaves or wireless
LAN devices, the connection will be
disconnected.
3
Operating
yy When not connected the Bluetooth,
“BLUETOOTH” and “BT READY” appears on
the control panel.
yy When someone stands and interrupts
communication between Bluetooth device
and the player, the connection will be
disconnected.
yy If the gotten away of the distance between
Bluetooth and the unit, the sound quality
is lower and lower. The connection will
disconnect when the space between the
Bluetooth and the unit gets out of the
operating range of Bluetooth.
yy The device with Bluetooth® wireless
technology is disconnected, if you turn off
the main unit or put the device away from
the main unit more than 10 m.
yy Bluetooth connection will be disconnected
When the function changes to the others.
yy If the Bluetooth device is disconnected, you
should connect the Bluetooth device to
your unit.
CM9730-FB_DAUSLLS_ENG.indd 23
2013-03-21 �� 2:04:08
24 Operating
Radio Operations
Presetting the Radio Stations
Be sure that both FM aerials are connected. (Refer
to the page 16)
Before tuning, make sure to turn down the volume.
Listening to the radio
1.Press TUNER on the unit or FUNCTION on the
remote control until FM appears in the display
window.
The last received station is tuned in.
3
Operating
2. Auto tuning :
Press and hold TUNING-/+ on the remote
control or Y/U on the unit for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
Or
Manual tuning :
Press TUNING-/+ on the remote control or
Y/U on the unit repeatedly.
3. Adjust the volume by rotating volume knob on
the unit or by pressing VOL +/- on the remote
control repeatedly.
Improving poor FM reception
Press T on the unit or d/M on the remote
control. This will change the tuner from stereo to
mono and usually improve the reception.
CM9730-FB_DAUSLLS_ENG.indd 24
You can preset 50 stations for FM.
1.Press TUNER on the unit or FUNCTION on the
remote control until FM appears in the display
window.
2.Press TUNING-/+ on the remote control or
Y/U on the unit to select a desired
frequency.
3.Press TUNER MEMORY. A preset number will
blink in the display window.
4.Press PRESET.FOLDER W/S to select the
preset number you want.
5.Press TUNER MEMORY. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESET.FOLDER W/S or 0 to 9 numerical
buttons.
Deleting all the saved stations
1. Press and hold TUNER MEMORY for two
seconds.
“ERASE ALL” will flash up on the unit display.
2.Press TUNER MEMORY to erase all the saved
radio stations.
2013-03-21 �� 2:04:08
Operating 25
Other Operations
Turn off the sound temporarily
Press MUTE@ to mute your unit.
You can mute your unit, for example, to answer
the telephone, the mute icon “Q” is blinked in the
display window.
Displaying file information
(ID3 TAG)
DEMO
In the power off state, it demonstrates the function
on display window with a demo sound and a
display by pressing SPEAKER LIGHT/DEMO.
To cancel the DEMO, press it again.
,,Note
yy While DEMO, this unit will keep DEMO
status even if you unplug the power cord
connection.
yy You can enjoy other functions during
the DEMO. Then the DEMO will pause to
temporary.
- Without
input key in 10 sec, the DEMO will
play back automatically.
1. Connect your microphone to the MIC jack.
2. Play the music you want.
3. Sing along with the accompaniment. Adjust
the microphone volume by rotating MIC VOL.
clockwise or unclockwise on the unit.
,,Note
yy When not using the microphone, set the
MIC VOL. to minimum or turn off the MIC
and remove the microphone from the
MIC jack.
yy If the microphone is set too near the
speaker, a howling sound may be produced.
In this case, move the microphone away
from the speaker or decrease the sound
level by using the MIC VOL..
yy If sound through the microphone is
extremely loud, it may be distorted. In this
case, rotate MIC VOL. to minimum.
3
Operating
While playing an MP3 file containing file
information, you can display the information by
pressing INFO.
Using Microphone
Switching on and off the
speaker light
You can select various types of the speaker light by
pressing SPK LIGHT/DEMO on the unit.
To turn off the light, press SPK LIGHT/DEMO
repeatedly until the light will be turned off.
Auto Power Down
This unit will power itself down to save electric
consumption in the case main unit is not
connected to external device and is not used for 25
minutes.
Also this unit will power down if no input is
connected using the analogue input after six hours.
CM9730-FB_DAUSLLS_ENG.indd 25
2013-03-21 �� 2:04:08
26 Operating
Sound adjustment
Setting the surround mode
This system has a number of pre-set surround
sound fields. You can select a sound mode you
want by using SOUND EFFECT on the remote
control.
The displayed items for the Equalizer may be
different depending on sound sources and effects.
3
,,Note
yy On some speakers, sound may not be heard
or heard in low sound depending on the
sound mode.
yy Maybe you need to reset the surround
mode, after switching the input, sometimes
even after the sound track/file changed.
yy By pressing BASS BLAST on the unit you
can directly select the BYPASS or
BASS BLAST sound.
Setting the USER EQ
Operating
On Display
Description
NATURAL
You can enjoy comfortable and
natural sound.
You can listen to music with equalizer by adjusting
the sound level yourself.
1.Press USER EQ. “USER EQ” is displayed.
Local
Specialization
equalizer
Regionally optimized sound
effect. (FORRO/FUNK/
SERTANEJO/DANGDUT/ARABIC/
PERSIAN/INDIA/REGUETON/
MERENGUE/SALSA/SAMBA/
CUMBIA/AFRO HIP HOP)
AUTO EQ
Realizes the sound equalizer that
is the most similar to the genre
of which is included in the MP3
ID3 tag of song files.
POP
CLASSIC
JAZZ
ROCK
This program lends an
enthusiastic atmosphere to the
sound, giving you the feeling
you are at an actual rock pop,
jazz or classic concert.
MP3 - OPT
This function is optimized
for compressible MP3 file. It
improves the treble sound.
BASS BLAST
Reinforces the treble, bass and
surround sound effect.
LOUDNESS
Improves the bass and treble
sound.
BYPASS
2. Turn the BASS, MIDDLE, and TREBLE knobs to
adjust the sound level.
3. To finish the setting, press SET.
You can enjoy the sound
without equalizer effect.
CM9730-FB_DAUSLLS_ENG.indd 26
2013-03-21 �� 2:04:08
Operating 27
Setting the Clock
Using your player as an alarm
clock
1. Turn the unit on.
1. Turn the unit on.
2.Press CLOCK.
2.Press TIMER. Each of functions flashes.
3. Select time mode by turning MULTI JOG on the
unit or press C/V on the remote control.
3.Press SET when the function you want to be
woken by is showing.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4.Press SET to confirm your selection.
6.Press SET.
7. Select the minutes by turning MULTI JOG on
the unit or press C/V on the remote
control.
8.Press SET.
5. The “OFF TIME” will be displayed. Turn MULTI
JOG on the unit or press C/V on the
remote control to change the hours and
minutes and press SET to save.
3
6.Turn MULTI JOG on the unit or press C/
V on the remote control to change the
volume and press SET to save. The clock icon
"(“ shows that the alarm is set.
Operating
5. Select the hours by turning MULTI JOG on the
unit or press C/V on the remote control.
4. “ON TIME” will be displayed. Turn MULTI JOG
on the unit or press C/V on the remote
control to change the hours and minutes and
press SET to save.
7.Press TIMER button 2 times. You can check the
setting status.
,,Note
yy If you set the clock time, you can check the
time by pressing CLOCK even when the
player is turned off.
yy If you set the clock time and alarm, you
can check the alarm icon “(“ by pressing
CLOCK even when the player is turned off.
yy If you set the clock time and alarm, you
can check the alarm icon “(“ and setting
informaiton by pressing TIMER even when
the unit is turned off.
yy To reset the time, press and hold CLOCK
or TIMER. And then follow the setting step
from 3.
CM9730-FB_DAUSLLS_ENG.indd 27
2013-03-21 �� 2:04:08
28 Operating
Sleep Timer Setting
Press SLEEP repeatedly to select delay time
between 10 and 180 minutes. After the delay time,
the unit will be turned off.
To cancel the sleep function, press SLEEP
repeatedly until “SLEEP 10” appears, and then press
SLEEP once again while “SLEEP 10” is displayed.
,,Note
yy You can check the remaining time before
the unit is turned off.
yy Press SLEEP. The remaining time appears in
the display window.
3
Advanced Operations
Recording to USB
You can record a various sound source to USB.
(CD, USB, AUX, PORTABLE, FM)
1. Connect the USB device to the unit.
2. Select a function in which you want to record
by using CD, USB, TUNER, or BLUETOOTH/
AUX/PORT.IN on the unit or FUNCTION on the
remote control.
One track/file recording - You can record to USB
after playing a track/file you want.
Operating
Dimmer
All tracks/files recording - You can record to USB
after stop.
Press SLEEP once. The display window will
be darkened by half. To cancel it, press SLEEP
repeatedly until dim off.
JUKE BOX list recording - After showing the
JUKE BOX list, you can record it to USB.
(Refer to the page 21)
3.Press
USB REC on the unit or USB REC on
the remote control.
- If you connect both USB1 and USB2, press
T to record to USB1 or press I to record to
USB2.
4. To stop recording, press I on the unit or
Z ENTER on the remote control.
Pausing recording
During recording, press
USB REC on the
unit or USB REC on the remote control to pause
recording. Press it again to restart recording.
(TUNER/AUX/PORTABLE only)
CM9730-FB_DAUSLLS_ENG.indd 28
2013-03-21 �� 2:04:08
Operating 29
To select recording bit rate and
speed
1.Press
USB REC on the unit or USB REC on
the remote control for longer than 3 seconds.
2.Press C/V on the remote control or
Y/U on the unit to select a bit rate.
3.Press
USB REC on the unit or USB REC on
the remote control again to select the recording
speed.
4.Press C/V on the remote control or
Y/U on the unit to select a desired
recording speed. (AUDIO CD only)
X1 SPEED
- You can listen to music while recording it.
5.Press
USB REC on the unit or USB REC on
the remote control to finish the setting.
Dubbing USB to USB
You can do dubbing a various sound source in
USB1 to USB2 on USB function.
1. Connect a USB device including desired sound
files to USB1.
2. Connect another USB device to USB2.
3.Press
USB REC on the unit or USB REC on
the remote control.
4. To stop recording, press I on the unit or
Z ENTER on the remote control.
yy You can check the recording percentage
rate for the USB record on the display
window during the recording. (MP3/WMA,
CD Only)
yy During recording MP3/WMA, there is no
sound.
yy For stable recording, the output sound level
goes down on its own when you record
music from CD to USB.
yy You can only change volume level between
MIN and 10 during recording. It will be kept
even after recording.
yy When you stop recording during playback,
the file that has been recorded at that time
will be stored. (Except MP3/WMA files)
yy Do not remove the USB device or turn off
the unit during USB recording. If does not,
an incomplete file may be made and not
deleted on PC.
3
Operating
X2 SPEED
- You can just record the music file.
,,Note
yy It is not supported to record music stored
on bluetooth device.
yy If USB recording does not work, the
message like “NO USB”, “ERROR”, “USB FULL”
or “NO REC” is displayed on the display
window.
yy Multi card reader device or External HDD
can not be used for USB recording.
yy A file is recorded by about 512 Mbyte when
you record for a long term.
yy You may not store more than 999 files.
yy It’ll be stored as follows.
The making of unauthorized copies of copyprotected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
CM9730-FB_DAUSLLS_ENG.indd 29
AUDIO CD
MP3/WMA
The other
source*
* : TUNER, AUX and the like.
2013-03-21 �� 2:04:09
4Troubleshooting
30 Troubleshooting
Troubleshooting
General
Problem
Cause & Solution
yy The power cord is not plugged in. Plug in the power cord.
No Power.
No sound.
yy Check whether electricity failed.
Check the condition by operating other electronic devices.
yy Check whether you select right function.
Press FUNCTION and check the selected function.
yy If not, connect speaker cables correctly.
Speaker cables connected correctly.
yy An unplayable disc is inserted. Check the playable disc.
4
The unit does not start
playback.
yy No disc is inserted. Insert a disc.
yy The disc is dirty. Clean the disc. (Refer to the page 33)
Troubleshooting
yy The disc is inserted upside down.
Place the disc with the label or printed side facing upwards.
yy The antenna is positioned or connected poorly.
Connect the antenna securely.
Radio stations cannot be
tuned in properly.
yy The signal strength of the radio station is too weak.
Tune to the station manually.
yy No stations have been preset or preset stations have been cleared (when
tuning by scanning preset channels).
Preset some radio stations, see page 24 for details.
yy The remote control is too far from the unit.
Operate the remote control within about 23 ft (7 m).
The remote control does yy There is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
not work properly.
yy The batteries in the remote control are exhausted.
Replace the batteries with new ones.
No speaker light
CM9730-FB_DAUSLLS_ENG.indd 30
yy Check whether the speaker light cables are connected to the unit correctly.
Connect the speaker light cables to the unit correctly.
yy Check the speaker light effects by pressing SPK LIGHT/DEMO.
2013-03-21 �� 2:04:09
5Appendix
Appendix
31
Trademarks and
Licenses
Bluetooth® wireless technology is a system
which allows radio contact between electronic
devices within a max. range of 10 meters.
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges.
A mobile phone with Bluetooth® wireless
technology can be operated via the Cascade
if the connection was made via Bluetooth®
wireless technology.
The Bluetooth® word mark and logos are owned
by the Bluetooth® SIG, Inc. and any use of such
marks by LG Electronics is under license.
Other trademarks and trade names are those of
their respective owners.
5
Appendix
CM9730-FB_DAUSLLS_ENG.indd 31
2013-03-21 �� 2:04:10
32 Appendix
General specifications
General
Power requirements
Refer to the main label.
Power consumption
Refer to the main label.
Dimensions (W x H x D)
(542 x 308 x 421) mm
Net Weight (Approx.)
9.85 kg
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Operating humidity
5 % to 90 %
Bus Power Supply
USB DC 5 V 0 500 mA
Inputs
AUX IN
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
PORT. IN
1.2 Vrms (3.5 mm stereo jack)
Tuner
FM Tuning Range
5
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
CD
Appendix
Frequency Response
40 to 20 000 Hz
Signal-to-noise ratio
75 dB
Dynamic range
80 dB
Amplifier
Output
575 W x 4 (8 Ω at 1 kHz, THD 10 %)
Front speaker
Type
Low channel
1 Way 1 speaker
High channel
2 way 2 speaker
Impedance
8Ω
Rated Input Power
575 W
Max. Input power
1150 W
Net Dimensions (W x H x D)
(520 x 720 x 499) mm
Net Weight
35.5 kg
yy Design and specifications are subject to change without notice.
CM9730-FB_DAUSLLS_ENG.indd 32
2013-03-21 �� 2:04:10
Appendix 33
Maintenance
Notes on Discs
Handling Discs
Never stick paper or tape on the disc.
Storing Discs
Handling the Unit
When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
Keeping the exterior surfaces clean
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Do not use volatile liquids such as insecticide spray
near the unit. Wiping with strong pressure may
damage the surface. Do not leave rubber or plastic
products in contact with the unit for a long period
of time.
Cleaning Discs
Cleaning the unit
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the centre to out.
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available cleaners,
or anti-static spray intended for old vinyl records.
Maintaining the Unit
CM9730-FB_DAUSLLS_ENG.indd 33
5
Appendix
The unit is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
For details, please contact your nearest authorized
service centre.
2013-03-21 �� 2:04:10
CM9730-FB_DAUSLLS_ENG.indd 34
2013-03-21 �� 2:04:10

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • 2300 W Black
  • Optical disc player
  • 75 Ω
  • Bluetooth
  • USB port
  • MP3 playback
  • Equalizer

Related manuals

Download PDF

advertisement