LG | FFH-786A | LG FFH-786A Owner’s Manual

AP_FFH-786(Eng)-A052T
MINI COMPO
System
OWNER'S MANUAL
MODEL
:
FFH-786A
FE-786E
Please read this manual
carefully
before
operating your
set.
Retain it for future reference.
Designs
and
notice for
specifications
improvement.
are
subject
to
change
without
Precautions
CAUTION
CAUTION
Use of controls
or
adjustments or performance
specified herein may
cedures other than those
RISK OF ELECTRIC
in hazardous radiation
of proresult
exposure.
SHOCK DO NOT OPEN
Laser
CAUTION:TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE
ting
component in this product is capable of emit-
radiation
exceeding
the limit for Class 1.
COVER(OR BACK)
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION:INVISIBLE LASER RADIATION WHEN
OPEN AND INTERLOCKS DEFEATED. AVOID
EXPOSURE TO BEAM.
VARNING:OSYNLIG LASERSTRALNING NAR
DENNA DEL AR OPPNAD STRALEN AR FARLIG.
Attention:Quand
Explanation Graphical Symbols:
The
s'exposer
lightning flash with arrowhead symbol,
an equilateral triangle is intended to
within
alert the
user
to the presence of uninsulated
dangerous voltage
within the
product's
point
within
an
is intended to alert the
equilateral
user
on
the interior.
enclo-
that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
triangle
l'appareil est ouvert, ne pas
radiations invisibles du faisceau laser.
This label is located
sure
The exclamation
aux
to the
presence of
important operating and maintenance(servicing) instructions in the literature
accompanying the appliance.
This
CLASS 1
LASER
KLASSE 1
LASER
PRODUKT
LUOKAN 1
LASER
LAITE
KLASS 1
LASER APPARAT
CLASSE 1
PRODUIT
Compact Disc player
product.
is classified
PRODUCT
as a
LASER
CLASS 1
LASER
WARNING
The CLASS 1 LASER PRODUCT label is located
TO REDUCE THE RISK OF FIRE OF ELECTRIC
the exterior.
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
To avoid electrical
shock, do
not open the
Refer
qualified
personnel only.
The
servicing
to
apparatus shall
splashing
such
as
and that
cabinet,
not be
exposed to dripping or
objects filled with liquids,
be placed on the apparatus.
no
vases, shall
Warning:
Do not install this
a
book
2
case or
equipment
similar unit.
in
a
confined space such
on
Table of Contents
INTRODUCTION
OPERATION
Precautions...............................2
Presettingtheradiostations.................11
TableofContents..........................3
Listeningtotheradio......................12
BeforeUse................................4
TapePlayback............................13
BasicPlayback..........................13
ToStopPlay...........................13
TapeCounterReset......................13
.13
ToPlayFastRewindorFastForward.
Dubbing...............................13
SafetyPrecautions........................4
NotesonDiscs..........................4
NotesonRemoteControl...................4
.
FrontPanel/RearPanel.....................5
RemoteControl............................6
DisplayWindow............................6
.
.
.
.
.
.
Recording...............................14
BasicSetting...........................14
14
Recording from Radio, CD or Auxiliary source
.14
CDtoTapeSynchronizedRecording.
.
Connections..............................7
.
SpeakerSystemConnection................7
Antenna(Aerial)Connections................7
OPTICAL (Digital audio out jack) connection
(OPTIONAL)............................7
BEFORE OPERATION
SettingtheVoltage(OPTIONAL).
.
.
.
.
.
.
.
.
.
.
.
.
.
.8
.
.
.
.
.
.
.
CDPlayback.............................15
BasicPlayback..........................15
ToPausePlay..........................15
ToStopPlay...........................15
ToSkippingtheTrack.....................15
.15
ToPlayFastRewindorFastForward.
.
.
.
.
.
.
.
ToGotothenextdiscs....................15
SettingtheCLOCK.........................8
SleepFunction............................8
UsingMicrophone(OPTIONAL)...............8
ToSelectadiscdirectly...................15
.16
ToReplacediscsduringPlayback.
ToRepeatPlay.........................16
ToProgramPlay........................17
.
.
.
.
.
.
.
.
.
TimerFunction............................9
AudioAdjustment.........................10
VolumeAdjustment......................10
SoundQualityAdjustment.................10
MUTE................................10
Reference
Troubleshooting..........................18
Specifications............................19
SURROUND...........................10
DISPLAYMODE.........................10
XDSS
(Extreme Dynamic
Sound
System)
.
.
.
.
.
10
About the
symbols
DEMO................................10
Indicates hazards
DIMMER..............................10
itself
Reception
of RDS
(Radio
Data
System)
or
for instructions
likely to cause
damage.
harm to the unit
other material
Stations
-OPTIONAL............................10
Indicates
special operating
AuxiliaryFunction.........................10
Indicates
tips
and hints for
features of this unit.
making
the task easier.
3
INTRODUC
Before Use
shipping
ture
the unit
The
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
To
near
use
volatile
liquids,
such
as
the unit. Do not leave rubber
contact with the unit for
leave marks
Cleaning
a
insecticide spray,
or
long period
plastic products in
of time. They will
the surface.
on
a
Notes
soft, dry cloth. If the surfaces
soft cloth
use a
solution. Do not
benzine,
or
use
thinner,
are
moistened with
lightly
a
extremely dirty,
mild detergent
strong solvents, such
as
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for
the unit
To clean the cabinet
Use
ter out.
the surface clean
keep
Do not
discs
Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the cen-
the unit
Handling
When
Cleaning
Precautions
Safety
these
as
might damage
alcohol,
the surface
of the unit.
on
analog
Remote Control
Remote Control
Distance: About 23 ft
on
Discs
Handling
Angle:
and press
(7 m)
from the front of the
sensor.
About 30° in each direction of the front of the
sensor.
discs
Hold the disc
playback side of the disc.
the
by
edges so that fingerprints
Remote control
Do not touch the
on
sensor
the buttons.
remote
get
Operation Range
Point the remote control at the remote
remote
Notes
records.
Detach the
will not
installation
battery
of the remote
the surface.
Do not stick paper
battery
or
tape
on
the disc.
R03
(size AAA)
and
cover on
the
control, and insert
rear
two
batteries with
aligned correctly.
Caution
Do not mix old and
Storing
After
types
discs
playing,
store the disc in its
case.
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sunas there may be a considerable
increase inside the car.
light,
4
temperature
of batteries
new
batteries. Never mix different
(standard, alkaline, etc.).
Front Panel/Rear Panel
AM
2019
12
34
18
56
21
FM
1615
78
910
FM
AM
17
22
RL
14
11
13
12
L+
-
23
-
R+
262524
1.
CD DOOR
2.
FM MODE/RIF button
3.
?
?
PLAY MODE button
COUNTER RESET
:
12.
PUSH OPEN
position
13.
PUSH OPEN
position
OPTIONAL
(COUNTER)
button
14.
:
OPTIONAL
?
DEMO button
4.
POWER
5.
?
6.
16.
SURROUND button
?
EQUALIZER
?
XDSS button
?
CLOCK button
?
TIMER button
TAPE B
(DECK B)
6.3mm
(EQ)
-
OPTIONAL
(DISC1, DISC2, DISC3)
button
17.
DISC SKIP
18. CD OPEN/
(D.SKIP)
button
CLOSE(CD
?
CD SYNC. button
button
)
?
NORMAL DUBBING button
?
HIGH DUBBING button
(OPTIONAL)
SET (CLOCK/ TIMER) button
COUNTER RESET button (COUNTER)
CD PAUSE (CD ) button
FUNCTION SELECT indicators
or
:
OPTIONAL
20.
REMOTE SENSOR
21. ANTENNA TERMINAL
22. AUXILIARY INPUT JACK
buttons
(TAPE, CD, TUNER/BAND, AUX)
23. SPEAKER TERMINAL
MULTI JOG SHUTTLE
24. OPTICAL
10. HEADPHONE SOCKET
(PHONES):
RECORD/ RECORD PAUSE
6.3mm
REC
(
)
button
(Digital
audio out
jack)
25. VOLTAGE SELECT SWITCH
26.
:
:
OPTIONAL
OPTIONAL
POWER CORD
TUNING button
?
TUNING
button
?
FAST FORWARD
(
?
REWIND
?
PRESET
?
OPTIONAL
DISC SELECTION PLAY buttons
RDS button
?
-
(MIC VOL.)
PROG./ MEMO button
?
11.
(MIC):
(DECK A)
?
?
9.
MIC VOLUME KNOB
TAPE A
?
?
8.
MIC SOCKET
?
-
15. VOLUME DOWN/UP knob
button
(STANDBY/ON)
19.
7.
?
-
(
(
)
/
)
FORWARD PLAY
?
BACKWARD PLAY
?
STOP
)/
button
button
?
(
)
button
(
)
(
button
)
button
:
OPTIONAL
CLEAR button
5
INTRODUC
Remote Control
1.
1
17
16
X
2345
XDSS button
2.
POWER button
3.
TUNER/BAND button
4.
AUX button
5.
PRESET
6.
CD FUNCTION buttons
15
)
PLAY/ PAUSE
(
CD
button
?
REWIND/ FAST FORWARD
STOP(
?CDSKIP(
13
6
(
12
78
?
11
10
A
A
)
button
)
button
)
/
REPEAT button
DISPLAY MODE button
8.
CLOCK button
9.
TAPE FUNCTION buttons
?
RECORD/ RECORD PAUSE
?
BACKWARD PLAY
?
?
FORWARD PLAY
FAST FORWARD
?
REWIND
(
)
(
)
:
button
OPTIONAL
button
)
(
(
button
)
(
TAPE STOP button
?
?
button
)
/
7.
9
A
button
?
?
14
(
)
(
)
button
button
TAPE-A/B SELECT button
10. DIMMER button
11. SLEEP button
12. DISC SKIP
(D.SKIP)
button
13. PROGRAM button
14. VOLUME CONTROL
(
PATTERN
15. EQUALIZER
) button
(EQ PATT.)
button
16. MUTE button
17. SURROUND
(SURR.)
button
Display Window
12345678
910
11
20
A
12
13
19 18 17
16
15
14
1.
PLAY/ PAUSE indicator
2.
PROGRAM indicator
?
TAPE PLAY DIRECTION indicator
3.
REPEAT indicator
?
TAPE A/B SELECT indicator
4.
SLEEP indicator
5.
TIMER indicator
13.
14.
?
PLAY MODE SELECT indicator
?
RECORD / RECORD PAUSE indicator
?
NORMAL DUBBING indicator
?
HIGH DUBBING indicator
6.
FM STEREO RECEIVING indicator
7.
CD SYNC. indicator
15. MUTE indicator
8.
MEMORY indicator
16. LEVEL indicator
9.
RDS indicator
17. SURROUND indicator
(OPTIONAL)
10. CD TRACK indicator
18. MIC
11. CD TRACK OVER indicator
19. DISC Number indicator
12. AUTO TUNING RECEIVING indicator
20. XDSS indicator
6
indicator
-
OPTIONAL
Connections
Connection
Speaker System
Connect the
speakers using the supplied speaker cords by matching the colors of the terminals and those
possible surround sound, adjust the speaker parameters (distance, level, etc.).
of the
cords. To obtain the best
RL
Red
INTRODUC
L+
-
Black
-
R+
Right speaker
Left
speaker
to
and
Red
Notes
?
Be
to match the
sure
are
speaker
cord to the
appropriate
terminal
on
the
components:
+
+
--
to
--.
If the cords
reversed, the sound will be distorted and will lack base.
?
If you use front
the speakers.
?
Do not disassemble the front
Antenna
speakers
with low maximum
cover
of
the volume
input rating, adjust
carefully
to avoid excessive
output
on
supplied speaker.
(Aerial) Connections
Connect the
supplied FM/AM antennas for listening to the radio.
loop antenna to the AM antenna connector.
the FM wire antenna (or FM "T" antenna) to the FM 75Ω/300Ω
?
Connect the AM
?
Connect
For
the
coaxial connector.
AM(MW) reception, connect
loop antenna (aerial) to the
terminal marked AM
FM external
AM(MW) loop
antenna (aerial)
antenna(aerial)
(not supplied)
coaxial cable
300
AM
loop antenna (aerial)
(Supplied)
FM external
antenna(aerial)
(not supplied)
FM indoor
antenna(aerial)
AM
AM
Position
it for the
best
FM 75
FM
reception
Notes
?
To
prevent noise pickup, keep the AM loop
?
Be
sure
?
After
fully
connecting
OPTICAL
antenna away from the unit and other
components.
extend the FM wire antenna.
to
the FM wire antenna,
(Digital
audio out
keep
jack)
it
as
horizontal
as
possible.
connection
(OPTIONAL)
Connecting to an amplifier equipped
or Dolby Surround.
with two channel
analog
stereo
Connect the unit's DIGITAL AUDIO OUT
corresponding
(optical) audio
in
jack
on
your
jacks (OPTICAL) to the
an optional digital
amplifier.
RL
Use
cable.
Amplifier
OPTICAL
COAXIAL
DIGITAL INPUT
L
R
AUDIO INPUT
7
the
Setting
Voltage (OPTIONAL)
If your set is equipped with a voltage selector at the back
the AC power cord.
side, be
to set it to your local power
sure
supplied
before
connecting
the CLOCK
Setting
1
Press CLOCK.
(If
CLOCK for
-
2
the clock is
The hours
Select
24 hour
a
turning
requires setting, press
more than 2 seconds.)
begin to blink.
cycle
When the
To
Use MULTI JOG SHUTTLE to set the correct
5
Press SET.
cycle by
hours.
Use MULTI JOG SHUTTLE to set the correct
6
minutes.
7
the
8
for about 5 seconds.
(24HR)
or
Press SET to confirm the selected hour
cycle.
Press SET and the correct time is shown
on
display.
Press CLOCK at any time to
display
the time
Function
Sleep
1
12 hour
4
MULTI JOG SHUTTLE.
(12HR)
3
or
and hold
sleep
timer is
specify
used, the power is automatically turned off after the specified time has elapsed.
the time
delay
before the power is
turned off, press SLEEP.
In the
display
window you
for
can see
about 5 seconds. This
means
turns off
after 90 minutes.
automatically
Each time the button is
that the
2
pressed the time interval
by 10 minutes. i.e.
80...70... etc.
Select the desired time to turn off.
remaining
time until the power is
turned off.
While the
briefly.
played
system
before it turns off is reduced
To check the
sleep
The time
function is active press SLEEP
remaining until it turns off is dis-
for about 5 seconds.
Note
If you press SLEEP while the
the SLEEP time is reset.
To cancel the
sleep
sleep
time is
displayed,
timer mode
If you wish to stop the function, press the SLEEP button
repeatedly until 10 appears, and then press SLEEP
once again while 10 is displayed.
Using Microphone (OPTIONAL)
You
can sing to a music
microphone to the unit.
source
by connecting
For your reference
can record during
a
You
Refer to the
Connect your
MIC socket.
microphone (not supplied)
1
2 Play
along
accompaniment.
3 Sing
Adjust
microphone
by turning
a
to the
Notes
?
music you want.
volume
When not
using
the
knob to minimum
?
with the
the
using microphone.
"Recording" explanation section.
MIC
VOLUME KNOB.
?
or
microphone,
set the MIC volume
turn off the MIC and
remove
the
microphone from the MIC socket.
If the microphone is set too near the speaker, a
howling sound may be produced. In this case, move
the microphone away from the speaker or decrease
the sound level by using the MIC volume control.
If sound through the microphone is extremely loud, it
may be distorted. In this case, turn the MIC volume
control toward minimum.
8
Timer Function
With the TIMER function you can have the radio reception and
and recording turned on and off at the time desired.
1
Press CLOCK to check the current time.
CD
recording,
play, tape play
2
you want to correct the previous
memorized TIMER setting, press and hold the
(If
"TIMER" button
The
previous
more
than 2
seconds.)
memorized timer
on
time and
"TIMER" appears in the display. Each function
TUNER-CD-TAPE flashes in the display
Press SET when the desired function is
3 flashing.
If you select the TUNER:
PLAY and REC flash in the
alternately
display
window
for about 3 seconds. Press SET to
operating mode.
recording and play
TUNER play only
If you have selected the CD
ignore step
5
Press SET.
12
Set the minute to switch off
13
Press SET.
BEFORPATIN
MULTI
by turning
MULTI JOG SHUTTLE.
the volume level
by turning
MULTI
Press SET.
"TIMER" appears in the display window
the timer setting has been completed.
previous
memorized
Switch the system off.
The selected function is
switched
and
or
TAPE, ignore
5.
To cancel
6
Set the hour to switch
7
Press SET to confirm the hour to switch
by turning
MULTI
JOG SHUTTLE.
The minute 'ON'
check the timer
select the timer set
setting
or
pressed
cancel. You
can
you can
also check the
status.
check the timer, press the TIMER
that "TIMER" appears in the display window.
To cancel the TIMER, press the TIMER button so that
button
or
so
"TIMER"
display
or
Each time the TIMER button is
timer
on
automatically
and off at the time set.
on
preset number
To activate
8
by turning
JOG SHUTTLE.
14 Adjust
16
TUNER;
If you have selected the CD
step
11
TAPE,
with MULTI JOG SHUTTLE and press SET.
The hour "ON" display flashes.
?
Set the hour to switch off
display.
4.
When you have selected the
Select the
or
flashes in the
10
15
REC: TUNER
PLAY:
now
JOG SHUTTLE.
confirm the desired
?
play
:
window in turn.
4
source
on.
setting
mode.
auxiliary
Press SET to confirm the minute to switch
9
The hour 'OFF'
Press "TIMER" to enter the timer
or
disappears
in the
display
window.
on.
flashes.
Set the minute to switch
on
by turning
MULTI
JOG SHUTTLE.
9
Audio
Adjustment
Volume
?
the sound
?
level,
level,
decrease it
Sound
or
on
(
press the VOLUME CONTROL
the remote control.
(
-
You
to
)
can
button
(EQ
desired sound mode
on
the front
by using
panel).
impressions.
the EQ PATT.
ROCK
→
POP
→
changes
as
VOCAL
→
↑
SALSA
←
Headphone
Connect
JAZZ
←
CLASSIC
←
Jack
headphone plug ( 6.3mm) into the
headphone jack.
The speakers are automatically disconnected when
you plug in the headphones (not supplied).
a
stereo
or
DEMO
again. During
demonstration in power-on status you
by using the other buttons.
can
cancel it
DIMMER
window
display
by
half in
power-on status. Press DIMMER once, and the display
is darken, and if you press it once more, the display will
darken by half too. To cancel it press the button again.
of RDS
Reception
Stations
(Radio Data System)
OPTIONAL
-
What is RDS?
MUTE
RDS
Press MUTE to mute your unit.
You can mute your unit in order, for
the
display.
it, press POWER
This function is darken the
SAMBA
?
Press DEMO in power off state to demonstrate the
function in the
To cancel
Each you press the button the indication
follows.
FLAT
as
DEMO
choose between 8 fixed sound
a
changes
XDSSOFF→XDSS1ON→XDSS2ON
Quality Adjustment
Select
Each you press the button the indication
follows.
-
To activate stereo sound
-
treble, bass and surround
effect.
to increase the
)
(Extreme Dynamic Sound System)
Press XDSS to reinforce
-
counterclockwise to decrease it.
or
Press VOLUME CONTROL
sound
?
XDSS
Adjustment
Tu r n VOLUME DOWN/UP knob clockwise to increase
telephone,
(Radio
introduced
example,
to
"MUTE" indicator flashes in the
answer
display
window.
Data
normal radio
tion
signal.
including
is
a
system gradually being
radio station
This data contains various informa-
station/ transmitter
information and
SURROUND
System)
FM in many countries, where by an
inaudible stream of data is transmitted in addition to the
on
a
identification, traffic
list of alternative
being
frequencies
for the
received.
To activate surround mode
?
You
?
Select
can
a
choose between 6 fixed sound
desired surround mode
impressions.
by using the
SURROUND button.
?
Each you press the button the indication
follows.
changes
as
1
2
Press TUNER/BAND
Select
a
repeatedly
desired station
by pressing
MOVIE HIGH
←
MOVIE LOW
←
MUSIC HIGH
←
MUSIC LOW
3
DISPLAY MODE
Whenever you press DISPLAY
the
spectrum change
with 6
MODE, you
types
in the
can
enjoy
display.
Auxiliary
10
Connect
an
Press the RDS to recall the
name
(PS)
after
frequency.
Notes
?
?
1
2
received, the dis-
shows the program service
RDS indicator appears.
play
↑
TUNING
/.
When the RDS transmission is
SURROUND OFF → SIMULATED LOW → SIMULATED HIGH
to select FM.
RDS is
only available for FM reception.
(PROGRAM SERVICE) NAME is displayed
automatically when a RDS station is received.
The PS
Function
auxiliary
device i.e. TV
or
VCR, via the
rear
mounted AUX
phone jacks.
Notes
Press AUX.
You
can
see
also record from the
Recording
Section.
auxiliary input
source,
Presetting
You
preset
can
the radio stations
30 stations for FM and AM. Before
tuning,
make
sure
that you have turned down the volume to the
minimum.
/
PRESET(
)
X
TUNER/
OPERATION
BAND
PRESET
(
)
PROG./MEMO
TUNER/
MULTI JOG
BAND
SHUTTLE
STOP
CLEAR
)/
/
TUNING
1
(
Press POWER to turn
on
To tune in
the unit.
station
2
a
station with
Tu r n MULTI JOG SHUTTLE in
Press TUNER/BAND until the FM
in the
or
AM appears
display window.
To clear all the memorized stations
Press and hold PROG./MEMO
And then every time you press TUNER/BAND,
FM and AM changes alternately.
4
Press TUNING
/
panel until the frequency
change, then release.
Scanning stops when the
the front
signal
3 to tune in the
manually.
about two
3
weak
a
step
the front
on
panel
for
seconds, "CLEAR" appears in the display win-
dow and then press
CLEAR
again,
the stations
are
cleared.
For your reference
If all stations have already been
indication starts to
entered, FULL message
will appear in the display window for a moment and then
a preset number will flash. To change the preset number,
unit tunes in
follow the
on
a
steps
5-6
on
the left side.
station.
To recall
5
Press PROG./MEMO
A
on
the front
preset number will flash in the
/
6PressPRESET(
control)
the remote
panel.
display window.
)(orPRESET(
to select the
)on
preset number
you want.
7
8
Press PROG./MEMO
-
on
the front
panel again.
presets
PressandholdPRESET( / )(orPRESET(
)
on the remote control) until the desired preset number
appears or press it repeatedly.
Tuning
in
automatically
Press TUNING
Tuning
in
/
.
manually
Tu r n MULTI JOG SHUTTLE.
The station is stored.
Repeat steps
3 to 6 to store other stations.
11
Listening
to the radio
Preset radio stations in the units memory first
/
PRESET(
(see "Presetting
radio stations"
on
the
previous page).
)
X
TUNER/
BAND
PRESET
FM MODE/RIF
(
VOLUME
()
)
POWER
VOLUME DOWN/
TUNER/
UP KNOB
BAND
/
TUNING
1
2
Press TUNER/BAND until AM
the
display
or
FM appears in
function mode
The last received station is tuned in.
Press PRESET
the remote
( / ) (or PRESET
control) repeatedly to select
preset station you
To turn off the radio
Press POWER to turn the unit off
window.
?
the
VOLUME
DOWN/UP KNOB
on
the remote
(or pressing VOLUME (
control) repeatedly.
)
?
For manual
see
"Tuning
in
manually"
on
?
the
12
previous
page.
see
"Tuning
in
improve reception
Reposition the supplied
Use FM MODE/RIF
tion is distorted
the
?
previous
page.
For automatic tuning,
To
antennas.
(Radio
function to switch the
non-preset radio stations
tuning,
noisy
Notes
?
To listen to
select another
in the
?
3
or
AUX).
so that "STEREO" disappears
display window. There will be no stereo effect,
but the reception will improve. Press FM MODE/RIF
again to restore the stereo effect.
want.
by rotating
or
Press FM MODE/RIF
Each time you press the button, the unit tunes in
preset station at a time.
the volume
TAPE
For your reference
If an FM program is
on
one
Adjust
(CD,
automatically"
on
When
recording
noises
occur.
by
If it
mono
Interference
reception
Filter)
if stereo recep-
noise.
the
MW(AM) or LW broadcast, beat
does, press FM MODE/RIF once.
Tape Playback
/
PLAY(
)
X
NOR./ HIGH
DUBBING
TAPE
/
PLAY(
/
)
STOP(
TAPE-A/B
STOP
(
)/
CLEAR
/
Basic
1
To
Playback
Press TAPE
repeatedly or TAPE-A/B
to select TAPE
Stop Play
Press
STOP(
) during playback.
AorTAPEB.
TAPE" appears in the
("NO
Tape Counter
display window.)
Reset
Press COUNTER
cassette TAPE A
2
Open
3
Insert
PUSH OPEN
Playing
(or B) by pushing
position.
4
two cassette with the
Press PLAY
(
or
:
to
(or B).
OPTIONAL).
display
win-
Play
Fast Rewind
or
Fast Forward
After
on
/
pressing and holding
/
on the remote control
panel or
during playback, press PLAY ( ) at the point you
the front
want.
Dubbing
AUTO STOP DECK (TAPE A/B)
After auto stop deck plays only front side,
automatically.
AUTO REVERSE DECK (TAPE A
You
tape side
the bottom and then close the TAPE A
in
dow.
To
one or
time
during playback.
appears "TAP A(or B) 0000"
can
pressing
Pressing
or
This function shows how to record from
the unit
B): OPTIONAL
select direction of the cassette you want
2
Function
Display
Twice
Three
times
a
playback tape
a
blank
Press NOR./ HIGH DUBBING
Pressing
After the cassette of TAPE A
DUBBING
plays front and
automatically.
reverse
six times
reverse
plays
follow.
Function
Display
Normal
speed
dubbing
Double
speed
dubbing
side, stops
After the cassette of TAPE A
plays
to dub.
tape.
as
HIGH
B
tape.
B.
?Cassette TAPE B- Insert
DUBBING
or
or TAPE-A/
NOR.
B
or
Press TAPE
to
?Cassette TAPE A- Insert
plays front or reverse (backward
play) side, stops automatically.
After
For th
1
by
PLAY MODE.
After the cassette of TAPE A
Once
stops
tape
repeatedly
or
B
To
stop dubbing, Press STOP (
).
front and
side, stops automatically.
cassette of TAPE A and B
a
six times
reverse
repeatedly front and
side, stops automatically.
13
)
OPERATION
Recording
Wind the
tape
Use
normal
You
only
can
to the
point recording
starts.
tapes.
record from cassette deck B
PRESET
(
/
only.
)/PLAY (
)
X
TUNER/
BAND
CD SYNC.
/
PLAY(
CD, TUNER/
)
BAND
TAPE
STOP(
STOP
(
)/
)
CLEAR
REC
/
Basic
1
Setting
Press CD
or
TUNER/BAND.
To Pause
recording
To pause the
recording,
PAUSE
"
2
the cassette TAPE B and insert
cassette into the cassette
To set the
a
blank
or
REC" flashes in
To
Open
REC
(
press RECORD/ RECORD
) button again.
display
window.
Stop recording
Press TAPE
STOP(
).
compartment.
recording direction :OPTIONAL
repeatedly to set the recording
CD to
Tape Synchronized Recording
Press PLAY MODE
The CD
a
complete
direction.
and
a
cassette.
Pressing
Function
Display
Recording
Once
1
front side.
synchro recording function dubs
programmed titles automatically into
Press CD SYNC. in stop mode.
"
REC" flashes and
display
""
displays
in the
window.
Twice
Recording
Three times
reverse
front and
2
side.
Four times
Recording
from
Radio, CD
or
Auxiliary
source
1
Press RECORD/ RECORD PAUSE
)
button
(
REC
or
14
If you wish to record from the desired
Press
PLAY( ) on the
recording begins.
commencing
?
The function
recording.
.
REC" flashes and holds the cassette in pause
mode.
The
synchronized recording is started
matically after about 7 seconds.
the desired track with
"
2
The
front
panel.
auto-
Notes
?
CD
CD
/
track, select
before
synchro recording.
change is not possible during
CD
Playback
X
PLAY/ PAUSE
CD OPEN/
CLOSE(
DISC
/
)
OPERATION
D.SKIP
POWER
PLAY(
()
)
1,2,3
STOP(
CD PAUSE
STOP
(
)/
(CD
)
D.SKIP
)
CLEAR
/
Basic
To Pause
Playback
Press POWER to turn
1
on
the unit.
(CD ) or PLAY/ PAUSE (
during playback.
Press the CD button to enter the CD mode.
To
If
Press
no
disc is entered in the disc
DISC" indicator is
Press CD
3
drawer,
the "NO
displayed.
)
and
place
the
?
on
the left
is
(DISC 1)
played
With the label side up
Skipping
of the
an
8cm(3 inch) disc, put
it onto the inner circle
tray.
Press CD
the Track
on
on
the front
button
CD SKIP
button
)
to close the disc
CD
the front
panel
the remote control
is pressed once midway through a track, the
player returns to the start of that track. When it
pressed again, a track is skipped each time the
button is pressed.
Play
Fast Rewind
and
or
/
pressing
front
panel
during playback, press
holding
/
or
point
is
Fast Forward
After
on
on
the
the remote
PLAY
(
)
at the
you want.
Press D.SKIP
remote control.
or
To Go to the next discs
compartment.
5PressPLAY(
on
on
control
OPEN/CLOSE(CD
panel
the remote control to go to the
When TUNING
To
Note
play.
resume
) during playback.
Press TUNING
or
DISC 1
it to
again
next track.
first.
?
To load
STOP(
SKIP
disc into the disc tray.
The disc
on
Stop Play
To
OPEN/CLOSE(CD
)
the remote control
Press this button
2
4
Play
Press CD PAUSE
)orPLAY/PAUSE(
)onthe
To Select
during playing
a
disc
Press DISC 1, DISC 2
or
stopping.
directly
or
DISC 3
during playing
or
stopping.
When you press DISC 1-3 before playing a disc, the unit
will automatically start playing the selected disc.
15
CD
Playback (Cont'd)
X
CD
OPEN/CLOSE(
)
REPEAT
To
Replace
You
can
discs
during Playback
open the disc tray
check what discs are to be
discs without
1
during playing a disc to
played next and replace
interrupting playback of the current disc.
Press the CD OPEN/CLOSE
(CD
).
To
Repeat Play
To
play
-
"REPEAT 1"
To
The disc
tray is opened. Two disc compartments
appear. Even if the unit is playing a disc, it doesn't
stop playing.
2
discs in the compartments with
ones.
-
The unit
plays
the disc in the left
compartment
disc, and then the
right compartment.
Press CD OPEN/CLOSE
(CD
one
in the
tray
?
at the
more
same
than
).
door,
all tracks
on
all discs
window.
repeatedly
during playback.
DISC"appears in the display
once more
window.
repeat play
Press REPEAT several times
until
repeat indicators
Press REPEAT
on one
disc
?
as
you may
once during program play.
"REPEAT 1" appears in the display window.
(One track repeat)
Press REPEAT
-
to close CD
repeatedly.
Program repeat play
?
compact disc
disc
disappear.
time.
Do no push the disc tray
damage the unit.
16
one
once
again during playback.
DISC" appears in the display
"REPEAT ALL
Notes
place
play
To cancel
-
The CD door is closed.
Do not
one
"REPEAT 1
-
?
repeatedly.
during playback.
appears in the display window.
Press REPEAT
-
after the current
3
new
play
track
Press REPEAT
To
Replace
one
Press REPEAT
again during program play.
"REPEAT ALL DISC" appears in the display window. (All program repeat)
CD
Playback
X
PLAY/ PAUSE
()
PROGRAM
PROG./MEMO
CD STOP
()
PLAY(
/
)
STOP
(
)CLEAR
/
To
Program Play
You
can
To check program contents
arrange the order of the tracks
own program. The program
create your
the discs and
on
can
contain up
Press
-
to 20 tracks.
PROG./MEMO
control)
The
on
the
PROGRAM
(or
on
the remote
stop mode.
disc, track and program number will be displayed.
To clear program contents
1
Press PROG./MEMO
remote
control)
on
(or
PROGRAM
the
on
Press PROG./MEMO
control)
the stop mode.
on
the front
2
3
Press D.SKIP
(DISC1/2/3)
or
Press TUNING
/
SHUTTLE
panel
the front
on
or
or
5
6
Press PROG./MEMO
Press
MULTI JOG
the remote
CD
STOP(
)
on
on
the remote control.
the remote control to
(or
Press PROG./MEMO
(or
on
PROGRAM
the program
on
the remote
stop mode until
"Disc Number" blinks.
PROGRAM
2.
Repeat
To
modify program
1.
Press the PROG./MEMO
(or
remote
program number you want
the
on
control).
2~5on the left side.
control)
to modify.
Repeat 2~4on
to
contents
display
PROGRAM
on
the
the left side.
1~4.
PLAY(
remote
or
control) repeatedly
2.
Repeat
on
CD SKIP
select the track.
remote
PROGRAM
To add program contents
1.
/
4
panel
(or
stop mode. And then press CLEAR
DISC SELECTION PLAY
to select the disc.
on
the
) (or
PLAY/ PAUSE
(
)
on
the
control).
17
OPERATION
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
problem
before
Cause
Symptom
Correction
No power.
?
The power cord is disconnected.
?
No sound.
?
The audio cables
?
are
not connected
securely.
?
?
The power of the external
ment is switched off.
The
playback.
Plug the power
securely.
cord into the wall outlet
Connect the audio cable into the
jacks
securely.
Digital
Audio
to the wrong
The unit does not start
service.
contacting
Output
position.
source
equip-
?
Turn
the
on
equipment
is set
?
Set the
Digital Audio Output to the corposition, then turn on the unit again
by pressing POWER.
rect
?
No disc is inserted.
?
Insert
a
disc.
?
An
?
Insert
a
playable
?
The disc is
unplayable
connected with
the audio cable.
disc is inserted.
placed upside
down.
?
disc.
Place the disc with the
playback
side
down.
?
The disc is not
placed
within the
guide.
?
Place the disc
inside the
?
The disc is
?
The remote control is not
remote
The remote control
does not work
?
properly.
dirty.
sensor
?
pointed
at the
?
of the unit.
There is
an
obstacle in the
path
of the
tray correctly
Point the remote control at the remote
of the unit.
?
Operate the
23ft(7m).
?
Remove the obstacle.
?
Replace
unit.
?
the disc
Clean the disc.
sensor
The remote control is too far from the
on
guide.
remote control within about
remote control and the unit.
?
The batteries in the remote control
exhausted.
18
are
the batteries with
new ones.
Specifications
Power
[Genral]
Power
consumption
120W
(MW)
[Amp]
[TAPE]
Designs
of the unit.
H
273
x
Frequency response
Signal-to-noise ratio
Dynamic range
Tuning Range
Intermediate Frequency
Signal to Noise Ratio
40
18000 Hz
Frequency Response
60
Tuning Range
Intermediate Frequency
Signal to Noise Ratio
Frequency Response
Output Power
522-1611kHzor530-1610kHz
100W
T.H.D
0.15%
Frequency Response
Signal-to-noise ratio
Tape Speed
42
Wow Flutter
0.25%
F.F/REW Time
120sec
Frequency Response
Signal to Noise Ratio
Channel Separation
43dB
(W
x
x
D)
-
330
87.5
REF NC
108.0 MHz
-
61/58 dB
-
10000 Hz
450 kHz
35 dB
100
-
-
2000 Hz
+
100W
25000 Hz
80 dB
4.75cm/sec
125
-
(MTT -111, JIS-WTD)
(C-60)
8000Hz
50dB(P/B)/45dB(R/P)
55dB (MTT-5511)
3Way 3Speaker
6Ω
60-20000 Hz
86dB/W
Rated
100W
Power
Input
Max. Input Power
NetDimensions(WxHxD)
Net Weight
specifications
mm
10.7 MHz
Sound Pressure Level
are
360
70 dB
Type
Impedance
Frequency Response
and
x
70 dB
Erase Ratio
[Speakrs]
panel
10.5kg
External dimensions
FM
AM
Refer to the back
Mass
[CD]
[Tuner]
supply
subject
(1m)
200W
230x326x277mm
4.85
to
kg
change
without notice.
19
P/NO :3828R-A052T
Download PDF

advertising