LG | LX-M150 | LG LX-M150 Owner’s Manual

AP_LX-M150A(ENG)
3/2/06
9:54
PM
1
Page
AP_LX-M150A(ENG)_112S
MICRO HI-FI SYSTEM
OWNER'S MANUAL
MODEL: LX-M150
(LX-M150A/D/X
Please read this manual
,
LXS-M150)
carefully
before
operating your
set.
Retain it for future reference.
Designs
and
notice for
specifications
improvement.
are
subject
to
CD-R/RW
change
without
3/2/06
AP_LX-M150A(ENG)
9:54
PM
Page
2
CAUTION:INVISIBLE LASER RADIATION
CAUTION
WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM.
RISK OF ELECTRIC
CAUTION:TO REDUCE THE RISK OF ELEC-
NAR DENNA
AR FARLIG.
TRIC SHOCK DO NOT REMOVE
Attention:Quand
BACK)
LASERSTRALNING
AR OPPNAD STRALEN
VARNING:OSYNLIG
SHOCK DO NOT OPEN
COVER(OR
NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
DEL
l'appareil
est
ouvert,
ne
pas s'exposer aux radiations invisibles du
faisceau laser.
SERVICE PERSONNEL.
This label is located
on
the interior.
Explanation Graphical Symbols:
The
lightning flash with arrowhead
symbol, within an equilateral triangle is intended to alert the user to
the presence of uninsulated dangerous voltage within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation
lateral
user
triangle
point
operating
an
equi-
is intended to alert the
important
maintenance(servicing)
instructions in the literature accompanying the appliance.
TO REDUCE THE RISK OF FIRE OF ELEC-
SHOCK, DO NOT EXPOSE THIS APPLI-
ANCE TO RAIN OR MOISTURE.
To avoid electrical
shock,
do not open the cabi-
net, Refer servicing to qualified
personnel only.
classified
the exterior.
on
CAUTION
Use of controls
of
procedures
or
adjustments
other than those
performance
specified here-
or
in may result in hazardous radiation exposure.
Laser
component in this product is capable of
radiation
CAUTION
Most
concerning
appliances
the limit for Class 1.
exceeding
the Power Cord
recommend
they
branch circuits. Check the
ping
this owner's manual to be certain.
Warning:Do
not install this
fined space such
a
book
equipment
case or
in
a con-
similar unit.
be
placed
upon a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
The
apparatus shall not be exposed to dripor splashing and that no objects filled
with liquids, such as vases, shall be placed
on the apparatus.
CLASS
as a
The CLASS 1 LASER PRODUCT label is
emitting
WARNING
TRIC
Compact Disc player is
product.
1 LASER
located
within
to the presence of
and
This
specification
page of
Do not overload wall outlets. Overloaded wall
outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or
cracked wire insulation
are
dangerous. Any
of
these conditions could result in electric shock
or
fire.
Periodically examine the cord of your
appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use
of the appliance, and have the cord replaced
with an exact replacement part by an authorized
servicer.
Protect the power cord from physical or
abuse, such as being twisted,
mechanical
kinked, pinched, closed in
a
door,
or
walked
upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the
appliance.
2
AP_LX-M150A(ENG)
3/2/06
9:54
PM
3
Page
Contents
1Introduction......................4
About the
.4
Symbols for instructions
NotesonTapes...................4
.
.
.
.
NotesonDiscs...................4
Handlingdiscs..................4
Storingdiscs....................4
Cleaningdiscs..................4
.4
Adjusting the voltage -OPTIONAL.
-
.
.
.
Front/RearPanel.................5
RemoteControl...................6
Remote Control
.6
battery installation
.6
Operation Range
DisplayWindow...................7
Remote Control
.
.
.
.
.
.
2Installation........................8
.8
SpeakerSystemConnection.
.8
(Aerial) Connections
AuxiliaryFunction.................9
AudioAdjustment..................9
VolumeAdjustment...............9
XDSS (Extreme Dynamic Sound System)
.9
Antenna
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Recording......................14
BasicSetting..................14
Recording from Radio,CD or Auxiliary
source.......................14
CD to Tape Synchronized Recording .14
CDPlayback..................15-16
BasicPlayback.................15
ToPausePlayBack..............15
ToStopPlay...................15
ToSkippingtheTrack.............15
To
Play
Fast Rewind
or
Fast Forward. 15
ToRepeatPlay.................15
To check the MP3 file information
.
.
.15
ToProgramPlay................16
AboutMP3....................16
4MaintenanceandService.
.
.
.
.
.
.
.
.
.
.
.17
Troubleshooting..................17
5Reference........................18
Specifications....................18
.
MUTE.........................9
SoundQualityAdjustment
.
.
.
.
.
.
.
.
.
.9
3Operation......................10-13
SettingtheClock..................10
SleepFunction.................10
TimerFunction...................11
RDSFunction-OPTIONAL.
.
.
.
.
.
.
.
.
.12
AboutRDS....................12
RDSTuning...................12
RDSDisplayOptions............12
.12
ProgrammeSearch(PTY)
.13
Presetting the Radio Stations
ListeningtotheRadio.............13
TapePlayback...................14
BasicPlayback.................14
ToStopPlay...................14
ToPausePlay..................14
To Play Rewind or Fast Forward
.14
AutoStopDeck.................14
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3
AP_LX-M150A(ENG)
3/2/06
9:54
PM
Page
4
1. Introduction
About the
symbols
Indicates hazards
unit itself
or
for instructions
likely to
cause
other material
harm to the
Notes
Handling discs
Do not touch the
damage.
the disc
Indicates
special operating
features of this
unit.
Notes
Discs
on
get
on
by
the
playback side of the disc. Hold
edges so that fingerprints do not
the surface. Never stick paper
or
tape
on
the disc.
on
on
Tapes
apes
Preventing overwriting
the
Removing
screwdriver)
tab(s)
will
a
recording
of the cassette
prevent accidental
(with
a
small
erasure.
Storing discs
After
Side A
Tab for side A
playing,
store the disc in its
case.
Do not
expose the disc to direct sunlight or sources of
heat and never leave it in a parked car exposed
to direct
sunlight.
Cleaning discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the
Tab for side B
To record
adhesive
again,
cover
the hole of the tab with
disc from the center out.
tape.
Adhesive
tape.
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available
cleaners, or anti-static spray intended for older
vinyl
records.
Adjusting
the
voltage
-
OPTIONAL
If your unit is equipped with a voltage selector at
the back side, be sure to set it to your local
power
cord.
4
supplied
before
connecting
the AC power
AP_LX-M150A(ENG)
3/2/06
9:54
PM
Page
5
Front / Rear Panel
1
17
16
Introducin
22
2
15
3
14
4
OPTIONAL
AM
13
5
12
6
FM
GND
11
7
21
8
18
L
20
R
10
19
9
1.
CD DOORZ
2.
POWER
11.?CD
3.
Remote Control Sensor
4.
POWER
5.
VOLUME CONTROL KNOB
6.
HEADPHONE SOCKET
(1STANDBY/ON)
button
12.
PLAY/PAUSE
(CDB /X )
?
PRESET
?
CD SKIP/SEARCH
indicator
(+/-)
?
(
PHONE):
13.
?
TUNING
?
FUNCTION SELECT
?
TUNER/BAND button
?
RDS
?
MODE/RIF button
(TUNER/
CLOCK button
?
TIMER button
?
REPEAT button
?
PROGRAM/MEMORY button
?
STOP/CLEAR button
8.
CASSETTE Holder
9.
?
RECORD
?PLAY(
?
(z)
(+/-)
buttons -TUNER
REWIND
(m )
-
CD/ TAPE
(FUNCTION)
button
/AUX)
(OPTIONAL)/SET
button
14. EQUALIZER PATTERN (EQ) button
15. DISPLAY
button
B ) button
(.m/M>)
buttons
3.5mm
7.
button
buttons
-
16. XDSS button
TAPE
17. CD
TAPE
button
?
FAST FORWARD
?
STOP/EJECT(x/Z)
?
PAUSE( X )
-
( M)
TAPE
button
button
button -TAPE
10. TAPE button DOOR
-
OPEN/CLOSE(Z) (OPEN/CLOSE)
18. VOLTAGE SELECT SWITCH
-
TAPE
TAPE
:
button
OPTIONAL
19. POWER CORD
20. SPEAKER TERMINAL
21. AUXILIARY INPUT SOCKET (AUX)
22. ANTENNA TERMINAL
5
AP_LX-M150A(ENG)
3/2/06
9:54
PM
Page
6
Remote control
11
1
1.
POWER button
2.P RESET (
10
3.
2
buttons
)
/
CD FUNCTION buttons
9
?
CD PLAY/ PAUSE
?
CD
?
8
STOP( x )
( B / [] )
buttons
button
CD SKIP/SEARCH
(.m/M>)
buttons
?
3
4.
7
REPEAT button
?
EQUALIZER PATTERN
?
XDSS button
5.
NUMBER buttons
6.
MP3 file information
4
(EQ PATT.)
button
display (MP3 Info)
button
5
6
7.
PROGRAM button
8.
SLEEP button
9.
VOLUME CONTROL
(
/
)
buttons
10. MUTE button
11
Remote control
battery installation
Detach the
the
rear
battery
AAA)
TUNER/BAND button
?
AUX button
Remote Control
cover on
of the remote
trol, and insert
?
.
con-
two R03
batteries with
(size
?
Distance: About 23 ft
remote
?
Angle:
(7 m)
About 30° in each direction of the front of
the remote
Caution: Do not mix old and
alkaline, etc.).
6
new
batteries.
types of batteries (standard,
from the front of the
sensor.
,
Never mix different
sensor
and press the buttons.
and
aligned corectly.
Operation Range
Point the remote control at the remote
sensor.
AP_LX-M150A(ENG)
3/2/06
Display
Window
9:54
PM
Page
7
13
1
Introducin
12
2
3
11
4
10
5
6
9
7
8
1.P LAY/ PAUSE indicator
8.
MEMO. indicator
2.
FUNCTION indicators
9.
TIMER indicator
3.
MP3 indicator
10. SLEEP indicator
4.
CD REPEAT indicator
11
5.
?
PROGRAM indicator
12. XDSS indicator
?
RECORD/ RECORD PAUSE indicator
13.?FM
6.
CD SYNCHRO RECORDING indicator
7.
RDS indicator
:
.
MUTE indicator
?
STEREO indicator
FM STEREO RECEIVING indicator
OPTIONAL
7
3/2/06
AP_LX-M150A(ENG)
9:54
PM
8
Page
2. Installation
Speaker System
Connect the
speaker
Connection
cords to the
speaker
terminals.
red
L
black
R
Right speaker
Left
red
speaker
otes
Be
?
sure
to match the
If the cords
?
are
speaker cord to the appropriate terminal on the components:
reversed, the sound will be distorted and will lack base.
If you use front speakers with low maximum
excessive output on the speakers.
Do not disassemble the front
?
cover
of
input rating, adjust
the volume
+
carefully
to
+
and
--
to avoid
supplied speaker.
(Aerial) Connections
Antenna
Connect the
supplied
FM/AM antennas for
listening
to the radio.
(OPTIONAL)
FM external
antenna
(aerial)
(not supplied)
FM indoor antenna
(aerial)
AM
loop antenna (aerial)
(Supplied)
Position it for
the best
AM
(MW) loop
(aerial)
(Supplied)
FM external
antenna
antenna
(aerial)
(not supplied)
coaxial
cable
For AM
AM
the
(MW) reception, connect
loop antenna (aerial) to the
terminal marked AM
FM 75
reception
300 ohms
AM
FM
FM wire antenna
(supplied)
otes
?T
8
o
prevent noise pickup, keep the AM loop
?
Be
?
After
antenna away from the unit and other
fully extend the FM wire antenna.
connecting the FM wire antenna, keep it
sure
to
as
horizontal
as
possible.
components.
to
--.
3/2/06
AP_LX-M150A(ENG)
9:54
Auxiliary
Function
1.
an
Connect
auxiliary
VCR, via the
rear
PM
Page
9
Sound
device i.e. TV
mounted AUX
?To
or
Select
Press AUX.
also record from the
can
see
source,
Recording
Volume
Adjustment
VOLUME CONTROL KNOB clockwise to
urn
increase the sound
to decrease it
?
on
level,
or
the front
Press VOLUME CONTROL
sound
()
/
XDSS
level,
or
on
: more
linear
:
frequency
Instal ion
response
bass, more treble
less bass, less treble
Headphone Socket
Connect a stereo headphone plug ( 3.5mm)
into the headphone jack.
The speakers are automatically disconnected
when you plug in the headphone.(not supplied)
counterclockwise
panel.
(
)
to increase the
the remote control.
(Extreme Dynamic
Press XDSS to reinforce
Sound
To
System)
treble, bass and the
surround effect. The "XDSS ON"
lights.
:
ROCK
press the VOLUME CONTROL
to decrease it
indicator
by using
CLASSIC: for orchestral music
?
Adjustment
FLAT
POP
auxiliary input
Section.
Audio
?T
desired sound mode
a
the EQ button.
ote
You
choose between 4 fixed sound
can
impressions.
sockets.
2.
activate stereo sound
You
phone
Quality Adjustment
or
"XDSS OFF"
cancel, press XDSS again.
MUTE
Press MUTE to mute your unit.
can mute your unit in order, for
You
in the
the
telephone,
display window.
answer
example,
to
"MUTE" indicator flashes
9
3/2/06
AP_LX-M150A(ENG)
9:54
PM
Page
10
3.Operation
Setting
1.
the Clock
Sleep
When the
Press CLOCK.
(If
Function
the clock
requires setting, press
CLOCK for more than 2 seconds.)
The hours begin to flash.
and hold
matically
elapsed.
sleep
timer is
used, the power is
turned off after the
specified
auto-
time has
-
2.
Select
1.
cycle or 24 hour cycle by
pressing TUNING (+/ -) on the front panel.
a
12 hour
To
specify
the time
power is turned
In the
display
delay
before the
off, press SLEEP.
window you
can see
for about 5 seconds.
This
means
that the
automatically
system
Each time the button is
(12HR)
pressed
the time
interval before it turns off is reduced
(24HR)
or
turns off
after 90 minutes.
by
10 minutes. i.e. 80...70... etc.
Select the desired time to turn off.
3.
Press SET to confirm the selected hour
4.
Use TUNING
(+/-)
correct hours
on
5.
Press SET.
6.
Use TUNING
cycle.
2.
the front
To check the
panel.
8.
(+/-)
on
buttons to set the
the front
panel.
ote
Press SET and the correct time is shown
on
display.
Press CLOCK at any time to
for about 3 seconds.
display
the time
off state.
10
If you press SLEEP while the sleep time is displayed, the SLEEP time is reset.
To cancel the
sleep timer
mode
If you wish to stop the function, press the SLEEP
button repeatedly until "SLEEP 10" appears, and
then press SLEEP once again while "SLEEP 10"
ote
The unit
sleep function is active press
briefly. The time remaining until it
off is displayed for about 5 seconds.
SLEEP
correct minutes
the
time until the
While the
turns
7.
remaining
power is turned off.
buttons to set the
can
also set the clock function in power
is
displayed.
AP_LX-M150A(ENG)
3/2/06
9:54
PM
11
Page
Timer Function
10. Press SET to confirm the hour to switch off.
With the TIMER function you can have the radio
reception and CD play turned on and off at the
11. Set the minute to switch off by pressing
time desired.
1.
2. Press TIMER to enter the time setting mode.
TUNER-CD flashes in the
display
window in
turn.
memorized
setting, press and hold the TIMER button
than 2 seconds.
previous
memorized timer
on
"TIMER" indicators appear in the
time and
(+/-)
buttons
the front
panel.
on
the front
panel.
14. Press SET.
"TIMER" appears in the display window and
setting has been completed.
the time
switched
To cancel
on
check the timer
or
Each time the TIMER button is
the time
flashing.
4.1.When you select the TUNER function,Select
previous memorized preset number with
(+/-) on the front panel and press
automatically
and off at the time set.
select the time set
display.
Press SET when the desired function is
the
TUNING
The selected function is
previous
TIMER
3.
on
15. Switch the system off.
For your reference
If you want to correct the
The
buttons
13. Adjust the volume level by pressing
For your reference
If you don't set clock, timer function doesn't work.
-
(+/-)
12. Press SET.
Press CLOCK to check the current time.
more
TUNING
setting
To activate
button
so
or
pressed
cancel. You
can
you can
also check
Operation
status.
time, press the TIMER
that "TIMER" appears in the display
or
check the
window.
To cancel the
TIMER, press the TIMER button
that "TIMER"
disappears
PRESET
in the
display
so
window.
SET.
-
"ON TIME" indicator appears for about 0.5
display window and then dis-
ote
seconds in the
The unit
appears.
off state.
can
also set the clock function in power
2.When you select the CD function,
"ON TIME" indicator appears for about
-
0.5seconds in the
display
window and then
disappears.
5.
6.
7.
Set the hour to switch
on
TUNING
on
(+/-)
buttons
by pressing
the front panel.
Press SET to confirm the hour to switch
Set the minute to switch
TUNING
(+/-)
buttons
on
on
on.
by pressing
panel.
the front
8.
Press SET to confirm the minute to switch
9.
Set the hour to switch off
(+/-)
buttons
on
the front
by pressing
panel.
on.
TUNING
11
3/2/06
AP_LX-M150A(ENG)
9:54
RDS Function
-
PM
12
Page
OPTIONAL
Programme
A
About RDS
This unit is
equipped with RDS (Radio
brings a wide range of
which
System),
tion to FM radio. Now in
RDS is
Data
informa-
use
system
information, a description of station
programme type text message about the station
a
network
or
specifics
that indicate the
The
(PTY)
benefit of RDS is its
broadcasts with
in many countries,
for transmitting station call signs
or
major
Search
following
ability to encode
Programme Type (PTY) codes
type of material being broadcast.
list shows the abbreviations used to
indicate each PTY
along
with
an
explanation
of
the PTY.
of musical selection and the correct
time.
RDS
Tuning
When
RDS
a
FM station is tuned in and it contains
data, the unit will automatically display the
station's call
sign and the RDS indicator will light
Display Window as well as indicators for
the programme type recognition (PTY), Radio
Text (RT), Clock Time (CT) and RDS services
programme (PS) if transmitted by the station.
in the
RDS
Display Options
The RDS
system is capable of transmitting a
variety of information in addition to the initial
call sign that appears when a station is first
tuned. In normal RDS operation the display will
wide
indicate the station name, broadcast network
Pressing RDS on the front panel
or
call letters.
enables you to
cycle through
the various data
You may search for
types in the sequence:
FREQUENCY
(PS
?
PTY
?
RT
RT
(Programme type recognition)-
of the programme
Window.
?
PTY
CT)
The
name
type is shown in the Display
(PTY) by following
Press TUNER/BAND to select FM mode.
Select
?
PS
the
required
mode
is
not
being
transmitted, the Display Window will show a
PTY NONE, RT NONE, CT NONE, PS NONE
message.
Press the RDS to select PTY mode.
4. To search for
a
different
PTY
5.
types.
When the PTY is
selected, press the
(.m/M>)
within 5 seconds.
The unit will go into an automatic search
mode and attempt to find the next station
with
acceptable signal strength
the desired PTY
12
PTY, press the PRESET
(+/-) while the last PTY in use is still
displayed to scroll through the list of available
ote
selected
is
appears.
3.
Some RDS stations may not choose to include
some of these additional features.If the data
for the
desired station
by pressing
(+/-). When the RDS transmission
received, the display shows the program
service name (PS) after RDS indicator
a
TUNING
text
Display Window.
(Programme Service name)- The name of
channel is shown in the Display Window.
steps:
1.
the unit to receive the actual time and show it in
the
specific Programme Type
2.
recognition)- The name of the
radio text is shown in the Display Window.
CT (Time controlled by the channel)- Enables
(Radio
a
these
type.
that matches
3/2/06
AP_LX-M150A(ENG)
Presetting
You
PM
13
Page
the Radio Stations
make
1.Press TUNER/BAND to select the FM
that you have turned
down the volume to the minimum.
tuning,
sure
1. Press TUNER/BAND to select the FM
or
AM
2.Press PRESET (+/-) (or PRESET (
the
panel until
to change,then
preset station you
-
when the unit tunes in
tion.
uning
in
automatically
(+/-) for more
Press TUNING
?T
the volume
/
()
uning
in
manually
(+/-) briefly
Press TUNING
?
For automatic
(+/-)
than 0.5 seconds.
on
the
A
repeatedly.
automatic tuning
tuning, press and
front panel.
in
or
Press POWER to turn the unit off
on
the front
step
2.
hold TUNING
4. Press PRESET (+/-) (or PRESET(
to select the
(CD,
or
TAPE
Operation
select
or
AUX).
panel
For your reference
?
control)
repeatedly.
radio stations
To turn off the radio
and
preset number will flash in the display window.
the remote
time.
a
by pressing VOLUME CONpanel or VOLUME
another function mode
3. Press PROGRAM/MEMO.
on
button, the unit
station at
non-preset
Use manual
)
the front
on
?
/
to select the
the remote control
on
To listen to
otes
?T
preset
one
TROL KNOB
sta-
a
AM
want.
Each time you press the
3.Adjust
release.
Scanning stops
control) repeatedly
the front
indication starts
frequency
the remote
tunes in
on
or
you want in the display window.
The last received station is tuned in.
you want in the display window.
Every time you press TUNER/BAND, FM and
AM changes alternately.
2. Press TUNING (+/-)
to the radio
Listening
50 stations for FM and AM.
preset
can
Before
9:54
/
preset
)on
If
an FM program is noisy
Press MODE/RIF so that STEREO
disappears in the display window. There will
"
num-
ber you want.
be
5. Press PROGRAM/MEMO.
no
stereo
improve.
The station is stored.
"
effect, but the reception will
Press MODE/RIF
again
to restore
the stereo effect.
6. Repeat steps 3 to 6 to store other stations.
?
To
improve reception Reposition
the
supplied
antennas.
To clear all the memorized stations
Press and hold PROGRAM/MEMO.
on
the front
seconds, "CLEAR" appears
in the display window and then press CLEAR,
panel
the stations
are
If all stations have
already
been
entered, FULL
the
To recall
preset number, follow the steps
(Radio
Interference
Filter)
reception if stereo
reception is distorted by noise.
recording the MW(AM) broadcast,
When
noises may
occur.
If it
beat
does, press MODE/RIF
once.
5-6.
presets
Press and hold PRESET
PRESET
desired
Use MODE/RIF
function to switch to MONO
?
message will appear in the display window for a
moment and then a preset number will flash. To
change
?
cleared.
For your reference
(or
otes
for about two
(
/
)
on
(+/-)
the remote
preset number appears
or
control) until the
repeatedly.
press it
13
AP_LX-M150A(ENG)
3/2/06
9:54
PM
Page
14
Tape Playback
Recording
Basic
Wind the
1.
2.
3.
Playback
Press FUNCTION
repeatedly
to appear
(Use only
TAPE indicator.
Basic
Open cassette deck by pushing
STOP/EJECT( x /Z) button.
1.
Insert
a
cassette with the
tape side
4.
Press PLAY
To
Stop Play
to the
2.
( B ).
Play
or
Fast Forward
pressing REWIND/FAST FORWARD
(bb/BB ) on the front panel during
playback or stopping.
stop deck plays only front side, the
stops automatically.
blank
a
compartment.
Radio, CD
or
Auxiliary
then press RECORD
For your reference
When you press RECORD
PLAY( B ) button is pressed
2.
(z) button,
automatically.
To pause recording
Press PAUSE (X) button
Press PAUSE
AUTO STOP DECK
unit
from
recording source, and
(z) button.
The recording begins.
(X) during playback.
button again it to resume play.
After
After auto
the cassette deck and insert
Press FUNCTION button to select desired
Play
Fast Rewind
TUNER/BAND
source
Press PAUSE
To
AUX)
(MP3/CD,
you want to record.
Recording
during playback.
starts.
Setting
Open
1.
Press this
point recording
tapes.)
cassette into the cassette
Press STOP/EJECT ( x/Z )
To Pause
to the
normal
Select the function
or
bottom and then close deck.
tape
(X)
button
during recording.
again to resume
recording.
3.
To
stop recording
Press STOP/EJECT ( x /Z).
CD to
Tape Synchronized Recording
The CD
plete
synchro recording function dubs a comprogrammed titles automatically
CD and
into
a
1.
When you select CD function, press
RECORD(z) button.
cassette.
"REC" appears and
display window.
"
"
displays
the
2.
The
synchronized recording is started
automatically after about 8 seconds.
otes
?
If you wish to record from the desired
select the desired track with CD
SKIP/SEARCH
commencing
?
The function
recording.
14
track,
(.m/M>) before
synchro recording.
change is not possible during
CD
in
3/2/06
AP_LX-M150A(ENG)
CD
9:54
PM
Page
15
To
Playback
Fast Rewind
Play
or
Fast Forward
After
Basic
1.
Playback
Press FUNCTION
to appear CD
repeatedly
indicator.
If
no
pressing CD SKIP/SEARCH
(.m / M>) buttons for more the
2 seconds on the front panel, then release
during playback,press PLAY ( B /[] ) at the point
you want.
disc is loaded then "NO DISC" is
displayed.
2.
Press CD OPEN/CLOSE
and
place
(
Z
ote
OPEN/CLOSE)
the disc into the disc
This function is not available to
tray.
ote
To
Repeat Play
To load
To
play
an
8cm(3 inch) disc, put
circle of the
it onto the inner
-
3.
Press CD OPEN/CLOSE
to close the disc
(ZOPEN/ CLOSE)
compartment.
Audio CD: "READING" appears in the
window,
of tracks and the
playing
-
time
are
4.
Press CD PLAY/ PAUSE
displayed.
once
"REPEAT ALL" appears in the
during playback.
disappears.
once more
indicator"
"Repeat
To check MP3 file information
Press the MP3 Info button
during
( B / [] ).
The information
(Title,
Artist
Play
( B / [] ) during playback.
resume play.
again
Press CD PLAY/ PAUSE
-
If there is
no
Album) of the
display window.
or
MP3 file will be shown in the
Press this button
MP3 file
playback.
-
To Pause
Operation
display.
repeat play
Press REPEAT
-
number of files is
repeatedly
during playback.
appears in the display.
"REPEAT 1"
To cancel
displayed.
MP3 CD: "READING" appears in the
display window, and then the total
MP3 file.
To play all tracks repeatedly
Press REPEAT again during playback.
display
and then the total number
a
track
one
Press REPEAT
tray.
play
information of the MP3
file, "NO
ID3 TAG" indicator will be shown in the
it to
display
window.
To
Stop Play
-
Press CD STOP
To
?
Skipping
( x ) during playback.
named
(BB >)
button
to go to the next track.
?
using English.
ote
the Track
Press the CD SKIP/SEARCH
The "MP3 file name" and "ID3 TAG" should be
This unit
can
play
a
contains audio titles
CD-R
or
or
CD-RW that
MP3 files.
(. bb ) button
pressed once midway through a track, the
player returns to the start of that track. When it
is pressed again, a track is skipped each time
the button is pressed.
When the CD SKIP/SEARCH
is
15
3/2/06
AP_LX-M150A(ENG)
To
9:54
PM
16
Page
About MP3
Program Play
You
can arrange the order of the tracks on the
discs and create your own program. The program
can contain up to 20 tracks.
1.
2.
Press PROGRAM/MEMO.
(or
the remote
stop mode.
control)
on
the
Press CD SKIP/SEARCH
PROGRAM
the remote
Repeat
5.
Press CD PLAY/ PAUSE
(or
PROGRAM
( B / [] ).
control)
on
the
(or
PROGRAM
on
the
remote
control)
STOP/CLEAR
on
on
the
(or
PROGRAM
on
the front
panel
or
compatibility with this unit is limited
follows:
Bit rate / 8
3.
CD-R
4.
If you record MP3 files using the software
which cannot create a FILE SYSTEM, for
/ 8
-
48kHz
320kbps
-
physical
format should be "ISO 9660"
example "Direct-CD" etc., it is impossible to
playback MP3 files. We recommend that you
use "Easy-CD Creator", which creates an
the
STOP( x )on
MP3 file that has not
2.
displayed.
stop mode. And then press
an
Sampling Frequency
To clear program contents
Press PROGRAM/MEMO.
not read
1.
stop mode.
-Atrack and program number will be
can
file extension.
MP3 Disc
as
To check program contents
remote
".mp3"
on
1~3.
Press PROGRAM/MEMO.
"MP3 files".
The unit
?
control).
4.
We call files that
(.m/M>)
Press PROGRAM/MEMO.
compressed by using
layer-3 file-coding scheme.
have the ".mp3" file extension
the MPEG1 audio
on
buttons to select the track you want.
3.
An MP3 file is audio data
?
ISO9660 file
5.
File
or
the remote control.
names
system.
should be named
less and must
using 30 letters
incorporate ".mp3" extension
e.g. "********.MP3".
To add program contents
1.
6.
the remote
(or PROGRAM on
control) repeatedly on the program
7.
stop mode until "Track Number" blinks.
2.
To
1.
Repeat
2.
on
the remote
-
to dis-
control)
modify.
program number you want to
2~4.
than 1000, it will
on
only
the disc
be shown up
About MULTI SESSION
contents
Press the PROGRAM/MEMO.
Repeat
more
to 999.
modify program
(or
play
Even if the total number of files
have
2~5.
PROGRAM
Donotusespecialletterssuchas"/:*?"<>"
etc.
Press PROGRAM/MEMO.
This function
recognizes the multi session disc
according to a disc of CD-ROM type.
ex) If there are MP3 files in the first session, the
MP3 file in the first session is only played.
If there are only MP3 files in the whole session, all of the MP3 files in the session
are
played.
If there is Audio CD in the first
session, only
the Audio CD in the first session is
16
played.
AP_LX-M150A(ENG)
3/2/06
9:54
PM
17
Page
4. Maintenance and Service
Troubleshooting
Cause
Symptom
No power.
?
Correction
The power cord is disconnected.
?
Plug
the power cord into the wall
outlet
No sound.
?
The audio cables
?
The power of the external
equipment is switched off.
connected
The unit does not
start
playback.
?
No disc
?
An
?
The disc is
or
are
not
?
securely.
jacks securely.
?
source
disc
or
tape is inserted.
placed upside
Switch
on
the external
source
equipment.
tape is inserted.
unplayable
securely.
Connect the audio cable into the
down.
?
Insert
a
disc
?
Insert
a
playable
?
Place the disc with the
tape.
or
disc
or
tape.
playback
side down.
?
The disc is not
placed
within the
?
guide.
The remote control
?
The disc is
?
The remote control is not
the remote
does not work
properly.
Place the disc
correctly
dirty.
sensor
pointed
at
?
There is
Clean the disc.
Point the remote control at the
?
Operate
?
The batteries in the remote
unit.
sensor
of the unit.
the remote control
within about 23 ft
an
obstacle in the
path
of the
tray
guide.
?
remote
The remote control is too far from the
the disc
?
of the unit.
?
on
inside the
?
(7 m).
Remove the obstacle.
remote control and the unit.
control
are
exhausted.
?
Replace
the batteries with
new
ones.
Mainte c andServic
17
3/2/06
AP_LX-M150A(ENG)
9:54
PM
18
Page
5. Reference
Specifications
[Genral]
Power
supply
Refer to the back
Power
consumption
20W
Mass
Frequency
Dynamic
[Tuner]
AM
(MW)
146 X 238 X 251mm
(WxHxD)
40
response
Signal-to-noise
FM
ratio
60 dB
87.5
Intermediate
10.7 MHz
Signal
Frequency
to Noise Ratio
55/50
65
-
74
MHz,
dB(MONO/STEREO)
10000 Hz
Tuning Range
522-1611kHzor530-1610kHz
Intermediate
450 kHz
Signal
Frequency
to Noise Ratio
-
35 dB
100
Power
-
1800 Hz
5W+5W
T.H.D
0.5%
Frequency Response
60
ratio
20000 Hz
-
60 dB
Tape Speed
4.75 Cm/sec
Wow Flutter
0.3%
F.F/REW Time
120sec
Frequency Response
250
Signal
to Noise Ratio
-
(MTT -111, JIS-WTD)
(C-60)
8000Hz
40dB(P/B)/38db(R/P)
Separation
32dB(P/B)/30dB(R/P)
Erase Ratio
50dB
Type
1
Impedance
4Ω
Frequency Response
100
Sound Pressure Level
88 dB/W
Rated
5W
Max.
Input
Input
Power
Power
Net Dimensions
Net
18
or
60
Channel
Designs
-
Frequency Response
Signal-to-noise
[Speakrs]
108.0 MHz
Tuning Range
Output
[TAPE]
18000 Hz
-
60 dB
range
Frequency Response
[Amp]
of the unit.
3kg
External dimensions
[CD]
panel
and
Way
-
1
Speaker
18000 Hz
(1m)
10W
148
(WxHxD)
Weight (1EA)
specifications
(MTT-5511)
x
238
x
183mm
1.4kg
are
subject
to
change without notice.
87.5
-
108.0 MHz
3/2/06
AP_LX-M150A(ENG)
P/NO
:
9:54
3834RH0112S
PM
Page
19
Download PDF

advertising