ENGLISH
OWNER’S MANUAL
300 W Sound bar system
Please read this manual carefully before operating your set and retain it
for future reference.
NB3530A (NB3530A, S33A1-D)
NB3530A-NB_DAUSLLK_ENG_1484.indd 1
2013-02-08
11:51:54
1
Getting Started
2
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with
arrowhead symbol within an
equilateral triangle is intended to
alert the user to the presence of
uninsulated dangerous voltage
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
NB3530A-NB_DAUSLLK_ENG_1484.indd 2
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
centre. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
2013-02-08
11:51:54
Getting Started
This device is equipped with a portable battery or
accumulator.
NB3530A-NB_DAUSLLK_ENG_1484.indd 3
yy The appliance is not intended for use by young
children or infirm persons without supervision.
yy Young Children should be supervised to ensure
that they do not play with appliance.
yy If the appliance is supplied from a cord extension
set or an electrical portable outlet device, the
cord extension set on electrical portable outlet
device must be positioned so that it is not
subject to splashing or ingress of moisture.
2013-02-08
1
Getting Started
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
3
11:51:54
4
Getting Started
Table of Contents
1
Getting Started
1
Getting Started
2
Safety Information
6
Unique features
6
– Auto power down
6
– Portable In
6
– Speaker ez (easy) setup
6
– LG Sound Sync
6Introduction
6
– Symbols used in this manual
6Accessories
7
Remote control
8
Front panel
8
Rear panel
9
Mounting the main unit on a wall
11 Setting up
11 – Pairing wireless subwoofer
2Connecting
12
12
12
13
13
13
13
Optional equipment connection
– PORT. (Portable) IN connection
– OPTICAL In connection
– USB connection
– Playable file
– Compatible USB devices
– USB device requirement
NB3530A-NB_DAUSLLK_ENG_1484.indd 4
3Operating
14
14
14
14
14
14
14
15
15
15
15
16
17
18
Basic operations
– USB operation
Other operations
– DRC (Dynamic range control)
– AV Sync
– Displaying file and input source
– Turn off the sound temporarily
– AUTO POWER On/Off
– Auto power down
– Sleep timer setting
– Dimmer
– LG Sound Sync
Using Bluetooth® technology
– Listening to music stored on the
Bluetooth devices
19 Sound adjustment
19 – Setting the surround mode
19 – Auto volume On/Off
19 – Adjust the woofer level settings
20 Controlling a TV with the supplied remote
control
20 – Setting up the remote to control your
TV
2013-02-08
11:51:54
Table of Contents
5
1
4Troubleshooting
21Troubleshooting
2
5Appendix
22 Trademarks and licenses
22Maintenance
22 – Handling the unit
23Specifications
3
4
5
NB3530A-NB_DAUSLLK_ENG_1484.indd 5
2013-02-08
11:51:54
6
Getting Started
Unique features
1
Auto power down
Accessories
Please check and identify the supplied accessories.
Getting Started
This unit will automatically turn itself off for saving
energy consumption.
Portable In
Listen to music from your portable device. (MP3,
Notebook, etc)
Remote control (1)
Batteries (2)
Wall Mount Bracket
Installation Template
(1)
Wall bracket (1)
Optical cable (1)
Cable ties for arranging
cables (2)
Speaker ez (easy) setup
Listen to sounds from TV, DVD or Digital device
with vivid 2.1 or 2.0 ch mode.
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.
Introduction
Symbols used in this manual
,,Note
Indicates special notes and operating features.
,,Tip
Indicates tip and hints for making the task easier.
>>Caution
Indicates cautions for preventing possible damages
from abuse.
NB3530A-NB_DAUSLLK_ENG_1484.indd 6
2013-02-08
11:51:56
Getting Started
Remote control
7
• • • • • • • • • • a • • • • • • • • • •
1 (Power): Switches the unit ON or OFF.
FUNCTION: Changes input sources.
OPTICAL: Changes input source to optical directly.
MUTE
: Mutes the sound.
1
Getting Started
W/S FOLDER: Searches for a folder of MP3/
WMA files. When an USB containing MP3/ WMA
files in several folders is being played,
press W/S FOLDER to select the folder you want
to play.
-/+ VOL: Adjusts speaker volume.
• • • • • • • • • • b • • • • • • • • • •
AUTO POWER: This function is automatically
turned on the unit.
AV SYNC: Synchronizes the audio and video.
INFO: Displays the file or input source information.
REPEAT: Listens to your files repeatedly or
randomly.
C/V (Skip/ Search) :
- Skips Fast backward or Forward.
- Searches for a section within a file.
Z: Stops playback.
d/M: Starts playback. / Pauses playback.
SOUND EFFECT: Selects a sound effect mode.
AUTO VOLUME: Turns on and off the AUTO
VOLUME mode.
WOOFER LEVEL: Sets the sound level of woofer.
• • • • • • • • • • c • • • • • • • • • •
Battery installation
Remove the battery cover on the rear of the
Remote Control, and insert two (size AAA) battery
with and matched correctly.
0 to 9 numerical buttons: Selects numbered files.
DRC: Sets DRC(Dynamic range control) function.
SLEEP: Sets the system to turn off automatically at
a specified time.
• • • • • • • • • • d • • • • • • • • • •
TV Control buttons: See page 20.
NB3530A-NB_DAUSLLK_ENG_1484.indd 7
2013-02-08
11:51:57
8
Getting Started
Front panel
1
A
B
C
D
E
Getting Started
G H
F
A 1/! (Standby/On)
B – / + (Volume)
Adjusts speaker volume.
C T (Play / Pause)
D I (Stop)
EF (Function)
Press it repeatedly to select other function.
F Speakers
G Display window
H USB Port
,,Note
Open USB cover by using your finger to
connect USB.
F
>>Caution
Precautions in using the touch buttons
yy Use the touch buttons with clean and dry
hands.
- In a humid environment, wipe out any
moisture on the touch buttons before
using.
yy Do not press the touch buttons hard to
make it work.
- If you apply too much strength, it can
damage the sensor of the touch buttons.
yy Touch the button that you want to work in
order to operate the function correctly.
yy Be careful not to have any conductive
material such as metallic object on the
touch buttons. It can cause malfunctions.
Rear panel
A
B
A PORT. (Portable) IN
NB3530A-NB_DAUSLLK_ENG_1484.indd 8
B OPTICAL IN 1/ 2
2013-02-08
11:51:58
Getting Started
Mounting the main
unit on a wall
2. When you mount it on a wall (concrete), use
the wall plugs (Not supplied). You should drill
some holes. A guide sheet (Wall Mount Bracket
Installation Template) is supplied to drill. Use the
sheet to check the point to drill.
ket Installation
Unit
Wall Mount Bracket
Installation Template
1
Getting Started
Wall Mount Brac
You can mount the main unit on a wall.
Prepare screws and brackets.
9
Template
,,Note
Screws and Wall Plugs are not supplied for
mounting the unit. We recommend the Hilti
(HUD-1 6 x 30) for the mounting. Please
purchase it.
Wall bracket
1. Match the TV’s BOTTOM EDGE of Wall Mount
Bracket Installation Template with the bottom
of TV and attach to the position.
TV
NB3530A-NB_DAUSLLK_ENG_1484.indd 9
2013-02-08
11:51:59
10
Getting Started
3. Remove the Wall Mount Bracket Installation
Template.
1
5. Hang the main unit onto the bracket as shown
below.
4. Fix it with screws (not supplied) as shown in the
illustration below.
Getting Started
>>Caution
yy Do not install this unit upside down. It can
damage the parts of this unit or be the
cause of personal injury.
yy Do not hang onto the installed unit and
avoid any impact to the unit.
yy Secure the unit firmly to the wall so that it
does not fall off. If the unit falls off, it may
result in an injury or damage to the product.
yy When the unit is installed on a wall, please
make sure that a child does not pull any of
connecting cables, as it may cause it to fall.
,,Note
Detach the unit from the bracket as shown
below.
NB3530A-NB_DAUSLLK_ENG_1484.indd 10
2013-02-08
11:52:00
Getting Started
Setting up
Pairing wireless subwoofer
LED Colour
Status
Yellow
The wireless subwoofer is
receiving the signal of the unit.
Yellow (blink)
The wireless subwoofer is trying
to connect.
Red
The Wireless subwoofer is in
standby mode.
Off (No
display)
The power cord of wireless
subwoofer is disconnected.
Setting up the wireless subwoofer
for the first time
1. Connect the power cord of the Wireless
subwoofer to the outlet.
2. Turn on the main unit : The main unit and
wireless subwoofer will be automatically
connected.
NB3530A-NB_DAUSLLK_ENG_1484.indd 11
Manually pairing wireless subwoofer
When the connection failed, you can see the red
LED on the subwoofer and cannot get sound from
the subwoofer. To solve this problem, follow the
steps below.
1. Press and hold I on the unit and MUTE on
the remote control simultaneously.
- “REMATE” appears on the display window.
2.Press PAIRING on back of the woofer.
- The Yellow LED will flicker.
3. Turn off and on the unit.
- If you see the yellow LED, it’ s successful.
1
Getting Started
LED indicator of wireless subwoofer
11
4. If you don’t see the yellow LED, try again Step 1
- Step 3.
,,Note
yy If you operate main unit then wireless
subwoofer sound within a few seconds in
standby mode.
yy Set the distance between this unit and
wireless subwoofer within 10 m (32 ft.).
yy Optimum performance can be
implemented only when the unit and
the Wireless subwoofer within distance
of 2 m (6 ft.) to 10 m (32 ft.) is used since
communication failure may occur if longer
distance is used.
yy It takes a few seconds (and may take longer)
for the unit and subwoofer to communicate
with each other.
2013-02-08
11:52:00
12
Connecting
Optional equipment
connection
OPTICAL In connection
Connect optical output of external devices to the
OPTICAL IN 1 or OPTICAL IN 2 connector.
PORT. (Portable) IN
connection
2
Connecting
To the digital
optical output jack of
external device
MP3 player, etc...
Speaker ez (easy) setup
Listens to sound from TV, DVD or Digital Device
with 2.1 or 2ch mode.
Listening to music from your
portable player
The unit can be used to play the music from many
types of portable player or external devices.
1. Connect the portable player to the
PORT. (Portable) IN connector of the unit.
2. Turn the power on by pressing 1.
3. Select the PORTABLE function by pressing
FUNCTION.
4. Turn on the portable player or external device
and start playing it.
NB3530A-NB_DAUSLLK_ENG_1484.indd 12
1. Connect the OPTICAL 1 or OPTICAL 2 jack on
the back of the unit to optical out jack of your
TV (or digital device etc.)
2. Select the input source to OPTICAL 1 or
OPTICAL 2 directly by pressing OPTICAL.
3. Listen to sound with 2.1 or 2ch speaker.
4.Press OPTICAL repeatedly to exit from OPTICAL.
Function is retuned to previous one.
,,Tip
This unit turns on and selects OPTICAL function
directly even in power-off state. Press OPTICAL
on the remote control.
2013-02-08
11:52:01
Connecting
USB connection
Compatible USB devices
Insert USB memory device to the USB port on the
unit.
yy MP3 Player : Flash type MP3 player.
13
yy USB Flash Drive : Devices that support USB1.1.
yy The USB function of this unit does not support
some USB devices.
USB device requirement
yy Do not extract the USB device while in operation.
yy For a large capacity USB, it may take longer than
a few minutes to be searched.
2
Connecting
yy Devices which require additional program
installation connected to a computer, are not
supported.
yy To prevent data loss, back up all data.
Removing the USB Device from the unit.
1. Choose a different function mode or press Z
on the remote control or I on the unit twice
in a row.
yy This unit is not supported when the total
number of files is 1000 or more.
yy The unit’s USB Port cannot be connected to PC.
The unit can not be used as a storage device.
2. Remove the USB device from the unit.
yy The exFAT file system is not supported on this
unit.
Playable file
yy Depending on some devices, it may not be able
to recognize the followings on this unit.
MP3/WMA file requirement
MP3/ WMA file compatibility with this unit is limited
as follows :
yy Sampling frequency : within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
yy Bit rate : within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
-- External HDD
-- Card readers
-- Locked devices
-- Hard type USB devices
-- USB hub
-- Using USB extension cable
yy Maximum files : Under 999
yy File extensions : “.mp3”/ “.wma”
yy A protected file by DRM(Digital rights
management) cannot be played on the unit.
NB3530A-NB_DAUSLLK_ENG_1484.indd 13
2013-02-08
11:52:02
14
Operating
Basic operations
Other operations
USB operation
DRC (Dynamic range control)
1. Connect the USB device to the USB port.
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [DRC ON] by using
DRC.
2. Select the USB function by pressing FUNCTION.
3. Select a file you want to play by pressing
C or V.
To
Stop
3
Playback
Pause
Operating
Skipping to the
next/previous
file
Do this
Press Z.
Press d/M.
Press d/M during playback.
During playback, press C
or V to go to the next file
or to return to the beginning
of the current file.
Press C twice briefly to
step back to the previous file.
Searching for a
section within a
file
Press and hold C/V
during playback and release it
at the point you want to listen
to.
Playing
repeatedly or
randomly
Press REPEAT on the remote
control repeatedly, the display
change in the following order,
RPT 1 RPT DIR (Directory)
RPT ALL RANDOM OFF.
Selecting files
directly
Press 0 to 9 numerical buttons
on the remote control to go
to the desired file directly.
Resume
playback
The unit memorizes the point
at which you've changed
function or the unit had been
turned off.
AV Sync
When receiving audio signals from TV, sound and
images may not be matched. In the case, this
function can adjust the delay time.
1.Press AV SYNC.
2.Use C/V to scroll up and down through
the delay amount, which you can set at
anything between 0 and 300 ms.
Displaying file and input
source
You can display various information on the USB and
OPTICAL IN 1/2 mode by pressing INFO.
USB : MP3/ WMA containing file information
OPTICAL IN 1/2 : Audio format, Audio channel
Turn off the sound temporarily
Press MUTE
to mute your unit.
You can mute your unit, for example, to answer
the telephone, the “ ” is displayed in the display
window.
To cancel it, press MUTE again on the remote
control or change the volume level.
,,Note
The resume point may be cleared when you
pull out the power cord or removing the USB
device from the unit.
NB3530A-NB_DAUSLLK_ENG_1484.indd 14
2013-02-08
11:52:02
Operating
15
AUTO POWER On/Off
Auto power down
Before operating this function, make sure that you
have selected OPTICAL IN and turn on the AUTO
POWER.
This unit will turn off itself to save electric
consumption in the case were main unit is not
connected to external device and is not used for 25
minutes.
This function automatically turns on/off the unit
when you turn on/off the external device (TV, DVD
Player, Blu-ray Disc Player, etc.) connected to this
unit by the optical cable.
So does this unit after six hours since Main unit has
been connected to other device using analogue
input.
When turning on the unit by this function, Optical
function is selected directly no matter what kind of
function has been selected before turning off it.
But the unit can turns on automatically based on
the [AUTO POWER] function you've set.
This function turns on or off each time you press
AUTO POWER.
Sleep timer setting
Operation
AUTO POWER ON
AUTO POWER function is
turned on.
AUTO POWER OFF
AUTO POWER function is
turned off.
,,Note
yy This function is intentionally designed to
turn off the unit after 1 minute of inactivity.
If you did not connect external devices with
optical cable or there is no digital audio
signal going to the unit, the unit will turn off
after 1 minute of inactivity if AUTO POWER
function is turned on.
yy Depending on the connected device by the
optical cable, this function may not operate.
yy Once AUTO POWER is set, the unit will
start as OPTICAL mode automatically next
time, no matter what kind of function you
selected before.
To check the remaining time, press SLEEP.
To cancel the sleep function, press SLEEP
repeatedly until “SLEEP 10” appears, and then press
SLEEP once again while “SLEEP 10” is displayed.
3
Operating
Display
Press SLEEP one or more times to select delay time
between 10 and 180 minutes, after the unit will
turn off.
,,Note
You can check the remaining time before the
Unit turns off.
Press SLEEP. The remaining time appears in
the display window.
Dimmer
Press SLEEP once. The display window will be
darken by half. To cancel it, press SLEEP repeatedly
until dim off.
yy It is not available to turn on the unit by
AUTO POWER function if you turn off the
unit directly.
yy AUTO POWER function is not supported on
LG Sound Sync (Wireless) mode.
NB3530A-NB_DAUSLLK_ENG_1484.indd 15
2013-02-08
11:52:03
16
Operating
LG Sound Sync
With wired connection
1. Connect your LG TV to the unit by using an
optical digital cable.
You can control some functions of this unit by
your TV's remote control with LG Sound Sync. It
is compatible with the LG TV that is supported LG
Sound Sync. Make sure of the LG Sound Sync logo
on your TV.
3
Controllable function by LG TV's remote control :
Volume up/down, mute
Operating
Refer to the TV's instruction manual for the details
of LG Sound Sync.
Make one of the following connections, depending
on the capabilities of your equipment.
Optical digital cable
,,Note
yy You can also use the remote control of
this unit while using LG Sound Sync. If you
use TV's remote control again, the unit
synchronizes with the TV.
yy When the connections failed, make sure of
the condition of the TV and power of it.
yy Make sure of the condition of this unit and
the connection in the cases below when
using LG Sound Sync.
-- Turned off the unit.
-- Changing the function to the others.
-- Disconnecting the optical digital audio
cable.
-- Disconnecting the wireless connection
caused by interference or a distance.
NB3530A-NB_DAUSLLK_ENG_1484.indd 16
2. Set up LG Sound Sync (Optical) on the TV. Refer
to the TV's instruction manual.
3. Turn on the unit.
4. Select OPTICAL 1 or OPTICAL 2 function.
You can see "LG OPT" on the display window if
connecting normally between this unit and your
TV.
,,Note
The amount of time to turn off this unit is
different depending on your TV when you set
AUTO POWER function to ON.
2013-02-08
11:52:04
Operating
With wireless connection
1. Set up LG Sound Sync (Wireless) on the TV. Refer
to the TV's instruction manual.
17
Using Bluetooth®
technology
2. Turn on the unit.
3. Select LG TV function.
"PAIRED" appears on the display window for about
3 seconds and then you can see "LG TV" on the
display window if connecting normally between
this unit and your TV.
,,Note
Once LG TV function is selected, the unit
connects automatically the TV which is
connected lately when restarting.
About Bluetooth®
Bluetooth® is wireless communication technology
for short range connection.
The available range is within 10 meters. (The sound
may be interrupted when the connection interfered
by the other electronic wave or you connect the
bluetooth in the other rooms.)
Available Devices : Mobile phone, MP3, Laptop,
PDA (This units be supported the Stereo Headset.)
3
Operating
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges. A
mobile phone with Bluetooth® wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth® wireless technology.
Bluetooth® profiles
In order to use Bluetooth® wireless technology,
devices must be able to interpret certain profiles.
This unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
NB3530A-NB_DAUSLLK_ENG_1484.indd 17
2013-02-08
11:52:04
18
Operating
Listening to music stored on
the Bluetooth devices
Pairing this unit and Bluetooth
device
Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed,
it does not need to be performed again.
3
1. Select the Bluetooth function by using the
FUNCTION.
Appears “BT” and then “BT READY” in display
window.
Operating
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device.Your unit appears as “LG SOUND BAR”.
3. Enter the PIN code.
PIN code : 0000
4. When this unit successfully paired with your
Bluetooth device, Bluetooth LED of this unit
lights up and appears “PAIRED”.
,,Note
Depending on the Bluetooth device type,
some device have a different pairing way.
5. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
,,Note
yy You should connect your Bluetooth device
to this unit again when you restart it.
yy The unit connects automatically to the
Bluetooth device which is connected last,
when you select Bluetooth function again
after changing to the other functions.
yy The sound may be interrupted when
the connection interfered by the other
electronic wave.
yy You cannot control the Bluetooth device
with this unit.
yy Pairing is limited one Bluetooth device per
one unit and multi-pairing is not supported.
yy Although the distance between your
Bluetooth and the set is less than 10 m,
there are obstacles between both, your
Bluetooth device cannot be connected.
yy Depending on the type of the device,
you may not be able to use the Bluetooth
function.
yy You can enjoy wireless system using phone,
MP3, Notebook, etc..
yy When not connected the Bluetooth, “BT
READY” appears on the display window.
yy The Electrical malfunction due to devices
using same frequency such as Medical
equipment, Microwaves or wireless
LAN devices, the connection will be
disconnected.
yy When someone stands and interrupts
communication between Bluetooth device
and the player, the connection will be
disconnected.
yy If the gotten away of the distance between
Bluetooth and the unit, the sound quality
is lower and lower the connection will
disconnect when the space between the
Bluetooth and the unit gets out of the
operating range of Bluetooth.
yy The device with Bluetooth® wireless
technology is disconnected, if you turn off
the main unit or put the device away from
the main unit more than 10 m.
NB3530A-NB_DAUSLLK_ENG_1484.indd 18
2013-02-08
11:52:04
Operating
Sound adjustment
,,Note
Setting the surround mode
yy In some of surround modes, some speakers,
there’s no sound or low sound. It depends
on the mode of surround and the source of
audio, it is not defective.
This system has a number of pre-set surround
sound fields. You can select a desired sound mode
by using SOUND EFFECT.
yy You may need to reset the surround mode,
after switching the input, sometimes even
after the sound file changed.
The displayed items for the equalizer may be
different depending on sound sources and effects.
On Display
NATURAL
You can enjoy comfortable
and natural sound.
You can enjoy the sound
without equalizer effect.
BASS
The BASS is Bass Blast. During
playback, reinforce the treble,
bass and surround sound
effect.
CLRVOICE
The CLRVOICE is Clear Voice.
This program make voice
sound clear, improving the
quality of voice sound.
GAME
The GAME is Game Equalizer.
You can enjoy more virtual
sound while playing video
games.
NIGHT
The NIGHT is Night Mode.
This may be useful when you
want to watch movies at low
volume late at night.
UPSCALER
The UPSCALER is MP3 UpScaling. When listening to
MP3 files or other compressed
music, you can enhance the
sound. This mode is available
only to 2 channel sources.
LOUDNESS
Improves the bass and treble
sound.
3D SOUND
3D Sound features deliver
sound creating a wider
spot so you can enjoy more
immersive and cinematic
surround sound.
NB3530A-NB_DAUSLLK_ENG_1484.indd 19
Auto volume On/Off
This unit supports Auto volume function that
automatically adjusts the volume level.
When the output sound is too loud or too low,
press AUTO VOLUME on the remote control. So
you can enjoy the sound with appropriate levels.
To cancel this function, press the button again.
Adjust the woofer level
settings
3
Operating
BYPASS
Description
19
You can adjust the sound level of woofer.
1.Press WOOFER LEVEL.
2.Press -/+ VOL to adjust the sound level of the
woofer.
2013-02-08
11:52:04
20 Operating
Controlling a TV with
the supplied remote
control
You can control your TV using the buttons below.
AV/INPUT
VOL +
PR/CH
VOL -
PR/CH
3
Operating
Button
Operation
MUTE
Turn the TV’s volume on or
off
AV/INPUT
Switch the TV’s input source
between the TV and other
input sources.
1 (TV POWER)
Turn the TV on or off.
VOL +/–
Adjust the volume of the
TV.
PR/CH W/S
Scan up or down through
memorized channels.
Setting up the remote to
control your TV
You can operate your TV with the supplied remote
control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down 1 (TV POWER) button, and
press the manufacturer code for your TV with
the numerical buttons (see the table below).
Manufacturer
Code Number
LG
1(Default), 2
Zenith
1, 3, 4
GoldStar
1, 2
Samsung
6, 7
Sony
8, 9
Hitachi
4
2. Release the 1 (TV POWER) button to complete
setting.
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code. When you replace the batteries
of the remote, the code number you have set may
be reset to the default setting. Set the appropriate
code number again.
,,Note
Depending on the unit being connected, you
may not be able to control your TV using some
of the buttons.
NB3530A-NB_DAUSLLK_ENG_1484.indd 20
2013-02-08
11:52:05
Troubleshooting
21
Troubleshooting
PROBLEM
No Power
No sound
No woofer sound
Display window is
dark.
CAUSE & CORRECTION
yy The power cord is unplugged.
Plug in the power cord.
yy Check the condition by operating other electronic devices.
yy Incorrect input source is selected.
Check the input source and select the correct input source.
yy The mute function is activated.
Press MUTE@ or adjust the volume level to cancel the mute function.
yy The power cord of woofer is not connected.
Plug the power cord into the wall outlet securely.
yy Pairing between the unit and woofer gets disconnected.
Connect the unit and woofer. (Refer to the page 11.)
yy The Dimmer or the Sleep function is activated.
Press SLEEP to cancel the function.
4
The remote control
does not work
properly.
Troubleshooting
yy The remote control is too far from the unit.
Operate the remote control within about 23 ft (7 m).
yy There is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
yy The batteries in the remote control is exhausted.
Replace the batteries with new one.
The Auto power on/ yy Depending on the connected device by the optical cable, this function may not
off function does not
operate.
work.
NB3530A-NB_DAUSLLK_ENG_1484.indd 21
2013-02-08
11:52:05
22 Appendix
Trademarks and
licenses
Maintenance
Handling the unit
When shipping the unit
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
Keeping the exterior surfaces clean
Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S.
and worldwide patents issued & pending. DTS,
the Symbol, & DTS and the Symbol together are
registered trademarks & DTS 2.0 Channel is a
trademark of DTS, Inc. Product includes software.
© DTS, Inc. All Rights Reserved.
5
Bluetooth® wireless technology is a system which
allows radio contact between electronic devices
within a max. range of 10 meters.
Appendix
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges.
A mobile phone with Bluetooth® wireless
technology can be operated via the Cascade if
the connection was made via Bluetooth® wireless
technology.
yy Do not use volatile liquids such as insecticide
spray near the unit.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in
contact with the unit for a long period of time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
The Bluetooth® word mark and logos are owned
by the Bluetooth® SIG, Inc. and any use of such
marks by LG Electronics is under license.
Other trademarks and trade names are those of
their respective owners.
NB3530A-NB_DAUSLLK_ENG_1484.indd 22
2013-02-08
11:52:06
Appendix 23
Specifications
General
Power requirements
AC 200 - 240 V, 50 / 60 Hz
Power consumption
40 W
Dimensions (W x H x D)
950 x 71 x 47 mm
Net Weight (Approx.)
2.5 kg
Operating temperature
41 °F to 95 °F (5 °C to 35 °C)
Operating humidity
5 % to 90 %
Bus Power Supply (USB)
DC 5 V 0 500 mA
Inputs
DIGITAL IN (OPTICAL IN)
3.0 Vrms (p-p), Optical jack x 2
PORT. IN
0.5 Vrms (3.5 mm stereo jack)
Amplifier
Stereo mode
80 W + 80 W (4 Ω at 1 kHz), THD 10%
Subwoofer
140 W (3 Ω at 60 Hz), THD 10%
5
Wireless subwoofer
AC 200 - 240 V, 50 / 60 Hz
Power consumption
40 W
Type
1 Way 1 Speaker
Impedance
3Ω
Rated Input Power
140 W
Max. Input Power
280 W
Dimensions (W x H x D)
170 x 360 x 316 mm
Net Weight
5.54 kg
Appendix
Power requirements
yy Designs and specifications are subject to change without prior notice.
NB3530A-NB_DAUSLLK_ENG_1484.indd 23
2013-02-08
11:52:06
NB3530A-NB_DAUSLLK_ENG_1484.indd 24
2013-02-08
11:52:06
Download PDF

advertising