LG | 26LS3500 | LG 22LS3500 Owner’s Manual

OWNER’S MANUAL
LED LCD TV
Please read this manual carefully before operating
your set and retain it for future reference.
LS35**
LS37**
P/NO : MFL67360802 (1203-REV02)
Printed in Korea
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
ENG
TABLE OF CONTENTS
3
LICENSES
3
OPEN SOURCE SOFTWARE NOTICE
4
SAFETY INSTRUCTIONS
10
INSTALLATION PROCEDURE
10
ASSEMBLING AND PREPARING
10
13
14
15
15
16
18
19
Unpacking
Parts and buttons
Lifting and moving the TV
Setting up the TV
- Attaching the stand
Mounting on a table
Mounting on a wall
Tidying cables
20
MAKING CONNECTIONS
20
21
21
22
22
23
23
Antenna connection
Adapter connection
HDMI connection
Component connection
Composite connection
USB connection
Headphone connection
24
REMOTE CONTROL
25
USING THE USER GUIDE
26
MAINTENANCE
26
26
26
Cleaning your TV
- Screen, frame, cabinet and stand
- Power cord
26
TROUBLESHOOTING
27
ENVIRONMENTAL INFORMATION
27
WEEE
28
SPECIFICATIONS
WARNING
yy If you ignore the warning message, you may
be seriously injured or there is a possibility
of accident or death.
CAUTION
yy If you ignore the caution message, you may
be slightly injured or the product may be
damaged.
NOTE
yy The note helps you understand and use
the product safely. Please read the note
carefully before using the product.
LICENSES / OPEN SOURCE SOFTWARE NOTICE
3
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays
DivX video. Visit divx.com for more information and software tools to convert your
files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or
its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274”
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com .
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping and handling) upon email request to
opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the
product.
ENGLISH
ENG
LICENSES
4
SAFETY INSTRUCTIONS
ENGLISH
ENG
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
Do not place the TV and remote control in the following environments:
yy
--A location exposed to direct sunlight
--An area with high humidity such as a bathroom
--Near any heat source such as stoves and other devices that produce heat
--Near kitchen counters or humidifiers where they can easily be exposed to steam
or oil
--An area exposed to rain or wind
--Near containers of water such as vases
Otherwise, this may result in fire, electric shock, malfunction or product deformation.
Do not place the product where it might be exposed to dust.
yy
This may cause a fire hazard.
Mains plug is the disconnecting device. The plug must remain readily operable.
yy
Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or
yy
covered with dust, dry the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.
Make sure to connect the power cable to the grounded current. (Except for devices
yy
which are not grounded.)
You may be electrocuted or injured.
Fix the power cable completely.
yy
If the power cable is not fixed completely, a fire can break out.
Ensure the power cord does not come into contact with hot objects such as a
yy
heater.
This may cause a fire or an electric shock hazard.
Do not place a heavy object, or the product itself, on power cables.
yy
Otherwise, this may result in fire or electric shock.
Bend antenna cable between inside and outside building to prevent rain from
yy
flowing in.
This may cause water damaged inside the Product and could give an electric
shock.
When mounting a TV it on the wall, make sure not to install TV by hanging power
yy
and signal cables on the back of the TV.
It may cause fire, electric shock.
SAFETY INSTRUCTIONS
Do not drop the product or let it fall over when connecting external devices.
yy
Otherwise, this may result in injury or damage to the product.
Des
icca
nt
Keep the packing anti-moisture material or vinyl packing out of the reach of
yy
children.
Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the
patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause
suffocation. Keep it out of the reach of children.
Do not let your children climb or cling onto the TV.
yy
Otherwise, the TV may fall over, which may cause serious injury.
Dispose of used batteries carefully to protect a child from eating them.
yy
In case that it eats them, take it to see a doctor immediately.
Do not insert a conductor (like a metal chopstick) into one end of the power cable
yy
while the other end is connected to the input terminal on the wall. Additionally, do
not touch the power cable right after plugging into the wall input terminal.
You may be electrocuted.(Depending on model)
Do not put or store inflammable substances near the product.
yy
There is a danger of explosion or fire due careless handling of the inflammable
substances.
Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the
yy
product, or inflammable objects such as paper and matches. Children must pay
particular attention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into the
product, unplug the power cord and contact the service centre.
Do not spray water on the product or scrub with an inflammable substance (thinner
yy
or benzene). Fire or electric shock accident can occur.
Do not allow a impact shock or any objects to fall into the product, and do not drop
yy
onto the screen with something.
You may be injured or the product can be damaged.
Never touch this product or antenna during a thunder or lighting storm.
yy
You may be electrocuted.
Never touch the wall outlet when there is leakage of gas, open the windows and
yy
ventilate.
It may cause a fire or a burn by a spark.
ENGLISH
ENG
Do not plug too many electrical devices into a single multiple electrical outlet.
yy
Otherwise, this may result in fire due to over-heating.
5
6
SAFETY INSTRUCTIONS
ENGLISH
ENG
Do not disassemble, repair or modify the product at your own discretion.
yy
Fire or electric shock accident can occur.
Contact the service center for check, calibration or repair.
If any of the following occur, unplug the product immediately and contact your local
yy
service centre.
--The product has been impacted by shock
--The product has been damaged
--Foreign objects have entered the product
--The product produced smoke or a strange smell
This may result in fire or electric shock.
If you don’t intend to use the product for a long time, unplug the power cable from
yy
the product.
Covering dust can cause a fire, or insulation deterioration can cause electric
leakage, electric shock or fire.
Apparatus shall not be exposed to dripping or splashing and no objects filled with
yy
liquids, such as vases, shall be placed on the apparatus.
SAFETY INSTRUCTIONS
Install the product where no radio wave occurs.
yy
There should be enough distance between an outside antenna and power lines to
yy
keep the former from touching the latter even when the antenna falls.
This may cause an electric shock.
Do not install the product on places such as unstable shelves or inclined surfaces.
yy
Also avoid places where there is vibration or where the product cannot be fully
supported.
Otherwise, the product may fall or flip over, which may cause injury or damage to
the product.
If you install the TV on a stand, you need to take actions to prevent the product
yy
from overturning. Otherwise, the product may fall over, which may cause injury.
If you intend to mount the product to a wall, attach VESA standard mounting interface (optional
yy
parts) to the back of the product. When you install the set to use the wall mounting bracket (optional
parts), fix it carefully so as not to drop.
Only use the attachments / accessories specified by the manufacturer.
yy
When installing the antenna, consult a qualified service man.
yy
This may create a fire hazard or an electric shock hazard.
5~7 times
We recommend that you maintain a distance of at least 5 to 7 times the diagonal
yy
screen size when watching TV.
If you watch TV for a long period of time, this may cause blurred vision.
Only use the specified type of battery.
yy
This could cause damage to the remote control.
Do not mix new batteries with old batteries.
yy
This may cause the batteries to overheat and leak.
Make sure there are no objects between the remote control and its sensor.
yy
Signal from the remote control may be disturbed by sun light or other strong light.
yy
In this case, darken the room.
When connecting external devices such as video game consoles, make sure the
yy
connecting cables are long enough.
Otherwise, the product may fall over, which may cause injury or damage the
product.
ENGLISH
ENG
CAUTION
7
8
SAFETY INSTRUCTIONS
ENGLISH
ENG
Do not turn the product On/Off by plugging-in or unplugging the power plug to the
yy
wall outlet. (Do not use the power plug for switch.)
It may cause mechanical failure or could give an electric shock.
Please follow the installation instructions below to prevent the product from
yy
overheating.
--The distance between the product and the wall should be more than 10 cm.
--Do not install the product in a place with no ventilation (e.g., on a bookshelf or in
a cupboard).
--Do not install the product on a carpet or cushion.
--Make sure the air vent is not blocked by a tablecloth or curtain.
Otherwise, this may result in fire.
Take care not to touch the ventilation openings when watching the TV for long
yy
periods as the ventilation openings may become hot. This does not affect the
operation or performance of the product.
Periodically examine the cord of your appliance, and if its appearance indicates damage or
yy
deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact
replacement part by an authorized servicer.
Prevent dust collecting on the power plug pins or outlet.
yy
This may cause a fire hazard.
Protect the power cord from physical or mechanical abuse, such as being twisted,
yy
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.
Do not press strongly upon the panel with a hand or sharp object such as nail,
yy
pencil or pen, or make a scratch on it.
Avoid touching the screen or holding your finger(s) against it for long periods of
yy
time. Doing so may produce some temporary distortion effects on the screen.
When cleaning the product and its components, unplug the power first and wipe it
yy
with a soft cloth. Applying excessive force may cause scratches or discolouration.
Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or
industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the
product and its panel.
Otherwise, this may result in fire, electric shock or product damage (deformation,
corrosion or breakage).
As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power
yy
source even if you turn off this unit by SWITCH.
When unplugging the cable, grab the plug and unplug it.
yy
If the wires inside the power cable are disconnected, this may cause fire.
When moving the product, make sure you turn the power off first. Then, unplug the
yy
power cables, antenna cables and all connecting cables.
The TV set or power cord may be damaged, which may create a fire hazard or
cause electric shock.
SAFETY INSTRUCTIONS
Contact the service center once a year to clean the internal parts of the product.
yy
Accumulated dust can cause mechanical failure.
Refer all servicing to qualified service personnel. Servicing is required when the
yy
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
If the product feels cold to the touch, there may be a small “flicker” when it is turned
yy
on. This is normal, there is nothing wrong with product.
The panel is a high technology display product with resolution of two million to six
yy
million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue
or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and
does not affect the performance and reliability of the product.
This phenomenon also occurs in third-party products and is not subject to
exchange or refund.
You may find different brightness and colour of the panel depending on your
yy
viewing position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel. It is not related with
the product performance, and it is not malfunction.
Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video
yy
game) for a prolonged time may cause damage to the screen, resulting in retention of the image,
which is known as image sticking. The warranty does not cover the product for image sticking.
Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours
for LCD, 1 or more hours for Plasma).
Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of
the panel.
This phenomenon also occurs in third-party products and is not subject to exchange or refund.
Generated Sound
yy
“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by
plastic thermal contraction due to tempera-ture and humidity. This noise is common for products
where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is
generated from a high-speed switching circuit, which supplies a large amount of current to operate a
product. It varies depend-ing on the product.
This generated sound does not affect the performance and reliability of the product.
ENGLISH
ENG
When moving or unpacking the product, work in pairs because the product is
yy
heavy.
Otherwise, this may result in injury.
9
10 INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
ENGLISH
ENG
NOTE
y y Image shown may differ from your TV.
y y Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
y y The available menus and options may differ from the input source or product model that you are
using.
y
y New features may be added to this TV in the future.
y y The TV can be placed in standby mode in order to reduce the power consumption. And the TV should
be turned off if it will not be watched for some time, as this will reduce energy consumption.
y
y The energy consumed during use can be significantly reduced if the level of brightness of the picture
is reduced, and this will reduce the overall running cost.
INSTALLATION PROCEDURE
1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
CAUTION
y y Do not use any unapproved items to ensure the safety and product life span.
y y Any damages or injuries by using unapproved items are not covered by the manufacturer’s warranty.
y y Some models have a thin film attached on to the screen and this must not be removed.
NOTE
y y The items supplied with your product may vary depending on the model.
y y Product specifications or contents of this manual may be changed without prior notice due to upgrade
of product functions.
y y For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick
and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory
stick does not fit into your TV’s USB port.
B
B
A
A
*A <
= 10 mm
*B <
= 18 mm
ASSEMBLING AND PREPARING
ENGLISH
ENG
or
11
Remote control and
batteries (AAA)
(See p. 24)
Owner’s manual
Polishing cloth
(Depending on model)
Use this to remove dust
from the cabinet.
Cable holder
(Depending on model)
(See p. 19)
Screw for assembly
2EA, P4 x 20
(Only 22LS35**, 22LS37**)
(See p. 15)
Screw for assembly
2EA, M4 x 14
(Only 26LS35**, 26LS37**)
(See p. 15)
Screw for assembly
4EA, P4 x 16
4EA, M4 x 14
(Only 32LS35**, 32LS37**)
(See p. 15)
Screw for fixing
(Only 32LS35**, 32LS37**)
(See p. 17)
Power Cord
DC Adapter
(Only 22/26LS35**,
22/26LS37**)
(See p. 21)
Isolator
(Depending on model)
(See p. 12)
Stand Body / Stand Base
(Only 22/26LS35**, 22/26LS37**)
(See p. 15)
Stand Body / Stand Base
(Only 32LS35**, 32LS37**)
(See p. 15)
12 ASSEMBLING AND PREPARING
ENGLISH
ENG
NOTE
yy Antenna Isolator Installation Guide
-- Use this to install TV in a place where there is a voltage difference between TV Set and GND of
antenna signal.
»» If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact
might be heated and excessive heat might cause an accident.
-- You can improve the safety when watching TV by efficiently removing power voltage from TV
antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall,
mount it on the TV. Avoid disconnecting the antenna Isolator after installation.
-- Before starting, be sure that the TV antenna is connected.
1. Connect to TV.
Wall
ANTENNA/
CABLE IN
Cable / Antenna
or
Isolator
2. Connect to Set-Top box.
Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.
“Equipment connected to the protective earthing of the building installation through the mains connection
or through other equipment with a connection to protective earthing - and to a cable distribution system
using coaxial cable, may in some circumstances create a fire hazard. Connection to a cable distribution
system has therefore to be provided through a device providing electrical isolation below a certain
frequency range (galvanic isolator, see EN 60728-11)”
W
hen applying the RF Isolator, a slight loss of signal sensitivity can occur.
ASSEMBLING AND PREPARING
ENGLISH
ENG
Parts and buttons
Screen
Remote control and
intelligent1 sensors
Power indicator
Speakers
OK
SETTINGS
Touch Button
INPUT
Touch buttons2
Description
Scrolls through the saved programmes.
H
Adjusts the volume level.
H
13
OK ꔉ
Selects the highlighted menu option or confirms an input.
SETTINGS
Accesses the main menu, or saves your input and exits the menus.
INPUT
Changes the input source.
/I
Turns the power on or off.
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.
14 ASSEMBLING AND PREPARING
ENGLISH
ENG
Lifting and moving the TV
Please note the following advice to prevent the
TV from being scratched or damaged and for safe
transportation regardless of its type and size.
yy When transporting a large TV, there should be
at least 2 people.
yy When transporting the TV by hand, hold the TV
as shown in the following illustration.
CAUTION
yy Avoid touching the screen at all times, as
this may result in damage to the screen.
yy It is recommended to move the TV in the box
or packing material that the TV originally came
in.
yy Before moving or lifting the TV, disconnect the
power cord and all cables.
yy When holding the TV, the screen should face
away from you to avoid damage.
yy Hold the top and bottom of the TV frame firmly.
Make sure not to hold the transparent part,
speaker, or speaker grill area.
yy When transporting the TV, do not expose the
TV to jolts or excessive vibration.
yy When transporting the TV, keep the TV upright,
never turn the TV on its side or tilt towards the
left or right.
ASSEMBLING AND PREPARING
15
Setting up the TV
Image shown may differ from your TV.
22/26LS35**, 22/26LS37**
Stand Body
1
1
4EA
Stand Body
Stand Base
ew(Stand+Head)Screw(Stand+Head)
M4 x 14
x 14
2
Stand Base
2
3
3
4EA
Model
22LS35**,
22LS37**
ENGLISH
ENG
Screw(Stand+Head)
M4 x 14
32LS35**, 32LS7**
Attaching the stand
26LS35**,
26LS37**
Standard screw
P4 x 20
M4 x 14
Number of screw
2EA
2EA
M4 x 14
P4 x 16
16 ASSEMBLING AND PREPARING
ENGLISH
ENG
CAUTION
yy When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect the
screen from scratches.
yy Tighten the screws firmly to prevent the TV
from tilting forward. Do not over tighten.
Mounting on a table
1 Lift and tilt the TV into its upright position on a
table.
-- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
NOTE
Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
10 cm
10 cm
m
10 c
10 cm
2 Connect the power cord to a wall outlet.
CAUTION
yy Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
ASSEMBLING AND PREPARING
(Only 32LS35**, 32LS37**)
Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
To secure the TV to a table, insert and tighten the
supplied screw on the rear of the stand.
WARNING
yy To prevent TV from falling over, the TV
should be securely attached to the floor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause injury.
Securing the TV to a wall
(This feature is not available for all models.)
1 Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
-- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
CAUTION
yy Make sure that children do not climb on or
hang on the TV.
NOTE
yy Use a platform or cabinet that is strong and
large enough to support the TV securely.
yy Brackets, bolts and ropes are not provided.
You can obtain additional accessories from
your local dealer.
ENGLISH
ENG
Securing the TV to a table
17
18 ASSEMBLING AND PREPARING
ENGLISH
ENG
Using the Kensington security system
(Depending on model)
The Kensington security system connector is
located at the rear of the TV. For more information
of installation and using, refer to the manual
provided with the Kensington security system or
visit http://www.kensington.com.
Connect the Kensington security system cable
between the TV and a table.
Mounting on a wall
Attach an optional wall mount bracket at the rear
of the TV carefully and install the wall mount
bracket on a solid wall perpendicular to the
floor. When you attach the TV to other building
materials, please contact qualified personnel.
LG recommends that wall mounting be performed
by a qualified professional installer.
10 cm
10 cm
10 cm
10 cm
Make sure to use screws and wall mount
bracket that meet the VESA standard. Standard
dimensions for the wall mount kits are described in
the following table.
Separate purchase(Wall Mounting Bracket)
Model
VESA (A x B)
Standard screw
Number of screws
Wall mount bracket
22/26LS35**,
22/26LS37**
100 x 100
M4
4
LSW100B
Model
VESA (A x B)
Standard screw
Number of screws
Wall mount bracket
32LS35**, 32LS37**
200 x 100
M4
4
LSW100B
A
B
ASSEMBLING AND PREPARING
yy Disconnect the power first, and then move
or install the TV. Otherwise electric shock
may occur.
yy If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and
contact the local dealer or qualified
personnel.
yy Do not over tighten the screws as this may
cause damage to the TV and void your
warranty.
yy Use the screws and wall mounts that meet
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the manufacturer’s
warranty.
Tidying cables
Only 22/26LS35**, 22/26LS37**
1 Gather and bind the cables with the Cable
Holder.
NOTE
yy Use the screws that are listed on the VESA
standard screw specifications.
yy The wall mount kit includes an installation
manual and necessary parts.
yy The wall mount bracket is not provided. You
can obtain additional accessories from your
local dealer.
yy The length of screws may differ depending
on the wall mount. Make sure to use the
proper length.
yy For more information, refer to the manual
supplied with the wall mount.
Cable Holder
Only 32LS35**, 32LS37**
1 Gather and bind the cables with the Cable
Holder on the TV back cover.
Cable Holder
CAUTION
yy Do not move the TV by holding the cable
holder, as the cable holders may break, and
injuries and damage to the TV may occur.
ENGLISH
ENG
CAUTION
19
20 MAKING CONNECTIONS
ENGLISH
ENG
MAKING
CONNECTIONS
Antenna connection
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
Connect various external devices to the TV
and switch input modes to select an external
device. For more information of external device’s
connection, refer to the manual provided with each
device.
Available external devices are: HD receivers,
DVD players, VCRs, audio systems, USB storage
devices, PC, gaming devices, and other external
devices.
ANTENNA/
CABLE IN
NOTE
yy The external device connection may differ
from the model.
yy Connect external devices to the TV
regardless of the order of the TV port.
yy If you record a TV programme on a DVD
recorder or VCR, make sure to connect the
TV signal input cable to the TV through a
DVD recorder or VCR. For more information
of recording, refer to the manual provided
with the connected device.
yy Refer to the external equipment’s manual for
operating instructions.
yy If you connect a gaming device to the TV,
use the cable supplied with the gaming
device.
yy In PC mode, there may be noise associated
with the resolution, vertical pattern, contrast
or brightness. If noise is present, change
the PC output to another resolution, change
the refresh rate to another rate or adjust the
brightness and contrast on the PICTURE
menu until the picture is clear.
yy In PC mode, some resolution settings may
not work properly depending on the graphics
card.
NOTE
yy Use a signal splitter to use more than 2 TVs.
yy If the image quality is poor, install a signal
amplifier properly to improve the image
quality.
yy If the image quality is poor with an antenna
connected, try to realign the antenna in the
correct direction.
yy An antenna cable and converter are not
supplied.
MAKING CONNECTIONS
21
HDMI connection
(Only 22/26LS35**, 22/26LS37**)
Transmits the digital video and audio signals from
an external device to the TV. Connect the external
device and the TV with the HDMI cable as shown.
Choose any HDMI input port to connect. It does
not matter which port you use.
DC IN
DC Adapter
1 Connect the antenna cable to the antenna
input port on the TV.
2 Connect the DC adapter plug to the power
input jack on the TV.
3 Connect the power cord to the DC adapter first,
then plug the power cord into the wall power
outlet.
CAUTION
IN
DVD/ Blu-Ray / HD Cable
Box / HD STB / PC
yy Please be sure to connect the TV to the DC
power adapter before connecting the TV’s
power plug to a wall power outlet.
(*Not Provided)
HDMI
NOTE
yy It is recommended to use the TV with the
HDMI connection for the best image quality.
yy Use the latest High Speed HDMI™ Cable
with CEC (Customer Electronics Control)
function.
yy High Speed HDMI™ Cables are tested to
carry an HD signal up to 1080p and higher.
yy Supported DTV Audio: MPEG, Dolby Digital,
Dolby Digital Plus, HE-AAC
yy Supported HDMI Audio format : Dolby
Digital, PCM (Up to 192 KHz, 32k/44.1k/48k
/88k/96k/176k/192k, DTS Not supported.)
ENGLISH
ENG
Adapter connection
22 MAKING CONNECTIONS
ENGLISH
ENG
Component connection
Composite connection
Transmits analog video and audio signals from an
external device to the TV. Connect the external
device and the TV with a component cable as
shown.
Transmits analog video and audio signals from an
external device to the TV. Connect the external
device and the TV with the composite cable as
shown.
AV IN
VIDEO
Y
PB
VIDEO
PR
L/MONO AUDIO R
L
R
Y
AUDIO
COMPONENT IN
AV IN
VIDEO
PB
VIDEO
L/MONO AUDIO R
PR
COMPONENT IN
R
AUDIO
RED
WHITE
(*Not Provided)
RED
WHITE
YELLOW
RED
WHITE
RED
BLUE
GREEN
L
YELLOW
RED
WHITE
RED
BLUE
GREEN
(*Not Provided)
R
VIDEO
VIDEO
L
L (MONO) AUDIO R
AUDIO
DVD/ Blu-Ray / HD Cable Box
NOTE
yy If cables are installed incorrectly, it could
case the image to display in black and white
or with distorted colour.
DVD/ Blu-Ray / HD Cable Box / VCR
MAKING CONNECTIONS
Connect a USB storage device such as a USB
flash memory, external hard drive, or a USB
memory card reader to the TV and access the My
media menu to use various multimedia files.
(Only 22/26/32LS37**)
USB IN
H/P
Headphone connection
ENGLISH
ENG
USB connection
23
USB
(*Not Provided)
(*Not Provided)
Transmits the headphone signal from the TV to
an external device. Connect the external device
and the TV with the headphone as shown.
NOTE
AUDIO menu items are disabled when
yy
connecting a headphone.
Headphone impedance: 16 Ω
yy
Max audio output of headphone: 9 mW to 15
yy
mW
Headphone jack size: 0.35 cm
yy
24 REMOTE CONTROL
ENGLISH
ENG
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching
the
and
ends to the label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
yy Do not mix old and new batteries, as this may damage the remote control.
yy In Analogue TV and some countries, some remote control buttons may not work.
Make sure to point the remote control toward the remote control sensor on the TV.
ENERGY
TV/RAD
TV/RAD
SAVING
GUIDE
INFO
RATIO
LIST
Q.VIEW
Q.VIEW
Q.MENU
SETTINGS
Q.MENU
Navigation buttons
(up/down/left/right)
EXIT
EXIT
FAV
P
P
A
G
E
P
P
A
G
E
MUTE
PAGE
1 Coloured buttons
1
Control buttons
(‫‏‬
)‫‏‬
2
2 TELETEXT
BUTTONS
Adjusts the brightness of the screen to reduce
energy consumption.
Selects Radio, TV and DTV programme.
Shows programme guide.
Views the information of the current programme
and screen.
Resizes an image.
Changes the input source.
Accesses the saved programme list.
Returns to the previously viewed programme.
Accesses the main menus.
Accesses the Quick menus.
Scrolls through menus or options.
Moves to the previous or next screen.
Returns to the previous level.
Clears on-screen displays and return to TV
viewing.
Accesses your favourite programme list.
Accesses the AV devices connected with the
HDMI cable through HDMI-CEC.
Opens the SIMPLINK menu.
Moves to the previous or next screen.
These access special functions in some menus.
(
: Red,
: Green,
: Yellow,
: Blue)
Recalls your preferred subtitle in digital mode.
Controls the MY MEDIA menus, or the SIMPLINK
compatible devices (USB,SIMPLINK).
These buttons are used for teletext.
USING THE USER GUIDE
25
ENGLISH
ENG
USING THE USER GUIDE
User Guide allows you to more easily access the detailed TV information.
Press SETTINGS to access the main menus.
Press the RED button to access the Customer
Support menus.
Press the Navigation buttons to scroll to User
Guide and press OK.
1
2
3
User Guide
1
PROGRAMME Setting
PICTURE, SOUND Setting
OPTION
Advanced Function
OPTION > To set language
SETTING  OPTION  Language
You can select the language of the menu displayed on the screen and the
digital sound broadcasting.
y Menu Language : Selects a language for the display text.
y Audio Language [In Digital Mode Only] : Select the desired language
when watching digital broadcasting containg several
voice languages.
y Subtitle Language [In Digital Mode Only] : Use the Subtitle function when
two or more subtitle languages are broadcast.
✎ If subtitle data in a selected language is not
broadcast, the default language subtitle will
be displayed.
Information
PICTURE
AUDIO
SETUP
TIME
LOCK
OPTION
INPUT
MY MEDIA
Zoom In
Close
SETTING  OPTION  Language
You can select the language of the menu displayed on the screen and the
digital sound broadcasting.
y Menu Language : Selects a language for the display text.
y Audio Language [In Digital Mode Only] : elect the desired language when
watching digital broadcasting containg several voice
languages.
y Subtitle Language [In Digital Mode Only] : Use the Subtitle function when
two or more subtitle languages are broadcast.
✎ If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed.
Press OK() to set programme settings.
Customer Support
2
Exit

Software Update
Picture Test
Sound Test
2
Signal Test
Zoom Out
Close
Product/Service Info.
User Guide
Close
User Guide
3
2
To use input device
To use Energy Saving feature
PROGRAMME Setting
To set time options
PICTURE, SOUND Setting
OPTION
To set TV lock options
To set language
Advanced Function
To set country
Information
1
To set subtitle
1
Allows to select the category you want.
2
Allows to select the item you want.
You can use ꕌ/ꕍ to move between pages.
3
Allows to browse the description of the
function you want from the index.
1
Shows the description of the selected menu.
You can use ꕌ/ꕍ to move between pages.
2
Zooms in or out the screen.
26 MAINTENANCE / TROUBLESHOOTING
ENGLISH
ENG
MAINTENANCE
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
yy Make sure to turn the power off and disconnect the power cord and all other cables first.
yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall
outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
yy To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
yy To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
yy Avoid touching the screen at all times, as this may result in damage to the screen.
yy Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may result in
scratches and image distortions.
yy Do not use any chemicals as this may damage the product.
yy Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or
malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem
Solution
Cannot control
the TV with the
remote control.
yy Check the remote control sensor on the product and try again.
yy Check if there is any obstacle between the product and the remote control.
to , to ).
yy Check if the batteries are still working and properly installed (
No image display
and no sound is
produced.
yy Check if the product is turned on.
yy Check if the power cord is connected to a wall outlet.
yy Check if there is a problem in the wall outlet by connecting other products.
The TV turns off
suddenly.
yy Check the power control settings. The power supply may be interrupted.
yy Check if the Auto sleep feature is activated in the Time settings.
yy If there is no signal while the TV is on, the TV will turn off automatically after
15 minutes of inactivity.
ENVIRONMENTAL INFORMATION
27
ENGLISH
ENG
ENVIRONMENTAL INFORMATION
(India only)
WEEE
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it means the product
is covered by the e-waste (Management and Handling) Rules, 2011.
2. All electrical and electronic products should be disposed of separately from the
municipal waste stream via designated collection facilities appointed by the government
or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative
consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact your city office, waste
disposal service or the shop where you purchased the product.
5. This product does not contain any of the hazardous substances as specified in the rule 13 (1) and (2) of
the e-waste (Management and Handling) Rules, 2011.
i;kZoj.kh; tkudkjh
WEEE
vius iqjkus midj.k dk fuiVku
ƒ. tc ;g dkVs x;s ifg;s okys fcu dk fpg+u fdlh mRikn ds lkFk layXu gksrk gS rks bldk vFkZ gS mRikn
¼izca/ku vkSj gFkkyu½ fu;e „Œƒƒ ds varxZr lfEefyr fd;k x;k gSA
„. lHkh bysfDVªdy ,oa vkSj bysDVªkfud mRiknkas dks ljdkj ;k LFkkuh; vf/kdkfj;ksa }kjk fu;qDr uxjikfydk
ls vyx izkf/kd`r dh xbZ laxzg lqfo/kkvksa ds ek/;e ls fuiVk;k tkuk pkfg,A
/kkjk …. lgh rjhds ls vius iqjkus midj.kksa dk fuiVku okrkoj.k vkSj ekuoh; LokLF; dss fy, laHkkfor udkjkRed ifj.kkeksa dks jksdus esa enn djsxkA
†. vius iqjkus midj.kksa ds fuiVku ds lac/k esa vkSj vf/kd folr`r tkudkjh ds fy,] d`i;k vius uxj dk;kZy;]
ls vkius mRikn [kjhnk Fkk] ogka laidZ djsaA
‡. bl mRikn esa
fuiVku lsok ;k tgka ¼izca/ku vkSj gFkkyu½ fu;e] „Œƒƒ ds fu;e ƒ… ¼ƒ½ vkSj ¼„½ esa funsZ’kkuqlkj dksbZ Hkh gkfudkjd inkFkZ “kkfey ugha gSA
28 SPECIFICATIONS
ENGLISH
ENG
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
For the power supply and power consumption, refer to the label attached to the product.
MODELS
22LS35**
26LS35**
32LS35**
22LS3500-TB
22LS350Y-TB
26LS3500-TB
26LS350Y-TB
32LS3500-TB
32LS350Y-TB
32LS3590-TC
32LS359Y-TC
523.0 x 376.0 x 140.0
627.0 x 442.0 x 162.0
755.0 x 530.0 x 239.0
627.0 x 402.0 x 30.1
755.0 x 479.0 x 45.8
Dimensions
(W x H x D)
With stand (mm)
Weight
With stand (kg)
3.5
5.0
9.1
Without stand (kg)
3.2
4.7
8.3
DC 24V, 1.4A
DC 24V, 1.8A
AC 100-240 V~ 50 / 60 Hz
22LS37**
26LS37**
32LS37**
22LS3700-TB
26LS3700-TB
32LS3700-TB
523.0 x 376.0 x 140.0
627.0 x 442.0 x 162.0
755.0 x 530.0 x 239.0
627.0 x 402.0 x 30.1
755.0 x 479.0 x 45.8
9.1
Without stand(mm) 523.0 x 339.0 x 31.6
Power requirement
MODELS
Dimensions
(W x H x D)
With stand (mm)
Weight
With stand (kg)
3.5
5.0
Without stand (kg)
3.2
4.7
8.3
DC 24V, 1.4A
DC 24V, 1.8A
AC 100-240 V~ 50 / 60 Hz
Without stand(mm) 523.0 x 339.0 x 31.6
Power requirement
Environment
condition
Operating Temperature
0 °C to 40 °C
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
Less than 85 %
SPECIFICATIONS
Television System
Programme
Coverage
Australia
Television System
Programme
Coverage
Indonesia,
Israel, Myanmar,
Sri Lanka
Television System
Programme
Coverage
South Africa
Television System
Programme
Coverage
Vietnam,
Malaysia
Television System
Programme
Coverage
Iran, Algeria,
Tunisia, Digital
model
Television System
Programme
Coverage
Analogue model,
India, Thailand,
--
Television System
Programme
Coverage
External Antenna
Impedance
Analogue TV
DVB-T
PAL/SECAM-B/G/D/K, PAL-I
UHF 21 to 69
DVB-T
VHF 06 to 12,
UHF 27 to 69
DVB-T
UHF 21 to 69
DVB-T
VHF 4 to 11, 13
UHF 21 to 68
DVB-T
VHF 6 to 12,
UHF 21 to 69
DVB-T
VHF 5 to 12,
UHF 21 to 69
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
PAL B/B
B/B : VHF/UHF 0 to 75, CATV : 2 to
44
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
-
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
-
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
75 Ω
75 Ω
ENGLISH
ENG
New Zealand,
Singapore
Digital TV
29
30 SPECIFICATIONS
ENGLISH
ENG
HDMI-DTV supported mode
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
720x480
31.469
31.5
31.25
59.94
60
50
37.5
44.96
45
33.72
33.75
28.125
26.97
27
33.716
33.75
56.25
67.43
67.5
50
59.94
60
59.94
60
50
23.97
24
29.976
30.00
50
59.94
60
720x576
1280x720
1920x1080
Component port connecting information
Component ports on the TV Y
PB
PR
Video output ports on DVD
player
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
Signal
480i/576i
480p/576p
720p/1080i
1080p
Component
O
O
O
O
(50 Hz / 60 Hz only)
(Only DTV)
Record the model number and serial number of
the TV.
Refer to the label on the back cover and quote
this information to your dealer when requiring any
service.
MODEL
SERIAL
Trade Mark of the DVB Digital Video
Broadcasting Project (1991 to 1996)
Download PDF