LG | 37LC7D | LG 26LC7D Owner’s Manual

I D N u m b e r : 4616: 26LC7D(26LC7D-AB)
4624: 32LC7D(32LC7D-AB)
4623: 37LC7D(37LC7D-AB)
4622: 42LC7D(42LC7D-AB)
ACCESSORIES
INPUT
D/A
MODE
ACCESSORIES
Ensure that the following accessories are included with your product. If an accessory is missing, please contact the dealer where you purchased the product.
TV
POWER
INPUT
VCR
BRIGHT
DVD
SIMPLINK
RATIO TEXT
i
SUBTITLE
INFO
MENU
EXIT
i
GUIDE
LIST
FAV
OK
Q.VIEW
VOL
PR
PAGE
MUTE
1
4
1.5V 1.5V
7
2
5
8
3
6
9
APM
0
SLEEP
SIZE
INDEX
TIME
?
REVEAL
Owner’s Manual
Batteries
I/II
Remote Control
Power Cord
* Slightly wipe stained spot on the exterior only with
the polishing cloth if there is stain or fingerprint on
the exterior.
Polishing Cloth
Polish the screen with the cloth.
* Do not wipe roughly when removing stain. Please be
aware that excessive force may cause scratch or discoloration.
This feature is not available for all models.
Cable Management
This feature is not available for all models.
2-TV Bracket Bolts
2-TV Brackets,
2-Wall Brackets
Twister Holder
4-bolts for stand assembly
Arrange the wires
with the twister holder.
See below for detail information.
(Refer to p.6)
1
CONTENTS
A C C E S S O R I E S .....................................................1
PREPARATION
CONTENTS
Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Back Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Stand Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Attaching the TV to a Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Back Cover for Wire Arrangement.................................................... 8
Desktop Pedestal Installation.................................................................... 9
Wall Mount: Horizontal installation ............................................ 10
Antenna Connection ............................................................................................ 11
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup.................................................................................................. 12
DVD Setup ............................................................................................................................ 15
VCR Setup............................................................................................................................. 18
Other A/V Source Setup ............................................................................. 21
PC Setup ................................................................................................................................. 22
- Screen Setup for PC Mode................................25
AV Output Setup ...................................................................................................... 26
Digital Audio Output Setup ................................................................... 27
Key Lock................................................................................................................................... 45
SIMPLINK ............................................................................................................................... 47
Digital Signal Strength..................................................................................... 48
PICTURE CONTROL
Picture Size(Aspect Ratio) Control . . . . . . . . . . . . . . . . . . . 49
Preset Picture Settings
- PSM - Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
- Auto Colour Tone Control
(Warm/Medium/Cool) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
- Adaptive Picture Mode(APM) . . . . . . . . . . . . . . . . . . . . . . 52
Manual Picture Adjustment
- PSM - User Option...................................................................................... 53
- Colour Tone - User Option........................................................... 54
Brightness Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
XD - Picture Improvement Technology ............................... 56
Advanced - Cinema ............................................................................................... 57
Advanced - Black(Darkness) Level............................................... 58
Picture Preset .................................................................................................................. 59
XD Demo ............................................................................................................................... 60
SOUND & LANGUAGE CONTROL
WATCHING TV/PROGRAMME CONTROL
Remote Control Key Functions ......................................................... 28
Turning on the TV ................................................................................................... 30
Initializing Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Programme Selection .......................................................................................... 31
Volume Adjustment ............................................................................................. 31
EPG(Electronic Programme Guide) . . . . . . . . . . . . . . . . . . . 32
On Screen Menus Selection and Adjustment .......... 35
Auto Programme Tuning................................................................................ 36
Manual Programme Tuning ....................................................................... 37
Fine Tuning........................................................................................................................... 39
Assigning a Station Name .......................................................................... 40
Programme Edit............................................................................................................ 41
Calling Up the Programme List.......................................................... 43
Input Source Selection ................................................................................... 44
2
Auto Volume Leveller(AVL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Preset sound settings - SSM Mode . . . . . . . . . . . . . . . . . . . 62
Sound Setting Adjustment - User Mode . . . . . . . . . . . 63
Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
TV Speakers ON/OFF Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
I/II
- Stereo/Dual Reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
- Speaker Sound Output Selection . . . . . . . . . . . . . . . . . 67
Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
TIME SETTING
PARENTAL CONTROL/RATINGS
CONTENTS
Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Auto On/Off Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Sleep Timer Setting............................................................................................... 72
Auto Shut - Off Setting .................................................................................................. 73
Set Password & Lock System . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Programme Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Parental Guidance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
External Input Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
TELETEXT
Switch On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Simple Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
TOP Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Fastext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Special Teletext Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
APPENDIX
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Programming the Remote Control . . . . . . . . . . . . . . . . . . 85
IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
External Control Through RS-232C . . . . . . . . . . . . . . . . . .90
After reading this manual, keep it handy for future reference.
3
PREPARATION
FRONT PANEL CONTROLS
■
■
This is a simplified representation of the front panel. Image shown may be somewhat different from your TV.
If your product has a protection film attached, remove the film and then wipe the product with a polishing
cloth.
PREPARATION
PR
PROGRAMME
(D,E)Button
VOL
VOLUME (F,G)
Button
OK
OK Button
MENU
MENU Button
INPUT
INPUT Button
R
(POWER) Button
Remote Control Sensor
Power Standby Indicator
• Illuminates red in standby mode.
• Illuminates green when the set is switched on.
4
This is a simplified representation of the back panel. Image shown may be somewhat different from your TV.
S-VIDEO
Connect S-Video out from an S-VIDEO device.
VIDEO
S-VIDEO
VIDEO L/MONO AUDIO R
L/MONO AUDIO R
S-VIDEO
1
RGB IN
1
2
VARIABLE
AUDIO OUT
COMPONENT IN
HDMI/DVI IN
2
HDMI IN
COMPONENT IN
1
2
5
4
RGB IN
6
RGB (PC)
ANTENNA
IN
DIGITAL
AUDIO OUT
AUDIO
(RGB/DVI)
REMOTE
CONTROL IN
OPTICAL
PTICAL
VIDEO
RS-232C IN
(CONTROL & SERVICE)
AV OUT
R AUDIO L/MONO VIDEO
AV IN 1
2
RS-232C IN
(CONTROL&SERVICE)
1
3
COMPONENT IN
RGB IN
HDMI/DVI IN
2
AV OUT
R AUDIO L/MONO VIDEO
2
RS-232C IN
(CONTROL&SERVICE)
1
AV IN 1
AV OUT
HDMI IN
AUDIO
1 (DVI)
VIDEO
S-VIDEO VIDEO
AUDIO
(MONO) AUDIO
AV IN 1
10
AUDIO Input
Connections are available for listening to stereo
sound from an external device.
VIDEO Input
Connects the video signal from a video device.
AV IN 2
AV IN 2
HDMI/DVI IN
PREPARATION
VARIABLE AUDIO OUT
8
ANTENNA
IN
2
DIGITAL
AUDIO OUT
OPTICAL
COMPONENT IN
Connect a component video/audio device to
these jacks.
8
AV (Audio/Video) IN 1
Connect audio/video output from an external
device to these jacks.
S-VIDEO
Connect S-Video out from an S-VIDEO device.
RS-232C IN (CONTROL &SERVICE) PORT
Connect to the RS-232C port on a PC.
9
AV OUT
Connect a second TV or monitor.
Remote Control Port
Connect your wired remote control.
10
Power Cord Socket
For operation with AC power.
Caution: Never attempt to operate the TV on DC
power.
RGB/AUDIO IN
Connect the output from a set top box or PC to
the appropriate input port.
AV OUT
VIDEO
RS-232C IN
(CONTROL & SERVICE)
3
(
) AUDIO
4
5
ANTENNA IN
Connect antenna signals to this jack.
6
DIGITAL AUDIO OUT
Connect digital audio from various types of
equipment. Note: In standby mode, these ports
do not work.
ANTENNA
IN
RGB IN
RGB (PC)
AUDIO
(RGB/DVI)
COMPONENT IN
REMOTE
CONTROL IN
OPTICAL
HDMI/DVI IN
ANTENNA
IN
RGB IN
RGB (PC)
AUDIO
(RGB/DVI)
COMPONENT IN
DIGITAL
AUDIO OUT
DIGITAL
AUDIO OUT
REMOTE
CONTROL IN
OPTICAL
VIDEO
OUT
RS-232C IN
(CONTROL & SERVICE)
VIDEO
OUT
AV OUT
S-VIDEO VIDEO
AV IN 1
REMOTE
CONTROL IN
7
AV OUT
HDMI/DVI IN
Connect a HDMI signal.
Or DVI(VIDEO)signal to the this port with a
HDMI to DVI cable.
1
9
RS-232C IN
(CONTROL & SERVICE)
AUDIO OUT
AUDIO OUT
5
V IN 1
7
1
MI/DVI IN
■
VIDEO L/MONO AUDIO R
UDIO
BACK PANEL INFORMATION
PREPARATION
STAND INSTALLATION
Carefully place the product screen side down on
a cushioned surface that will protect product and
screen from damage.
2
Assemble the product stand with the product as
shown.
3
Install the 4 bolts securely, in the back of the
product in the holes provided.
PREPARATION
1
6
ATTACHING THE TV TO A WALL
This Feature is not available for all models.
Set it up close to the wall so the product doesn’t fall over when it is pushed backwards.
A The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the
product doesn’t fall over when it is pulled in the forward direction. It will prevent the product from
falling forward and hurting people. It will also prevent the product from damage caused by fall. Please
make sure that children don’t climb on or hang from the product.
A
A
2
1
Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.
(If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
2
Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) on
the wall. Match the height of the bracket that is mounted on the wall.
PREPARATION
1
3
Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the
product. It is safer to tie the rope so it becomes horizontal between the wall and the product.
3
! NOTE
G
G
G
When moving the product to another place undo the ropes first.
Use a product holder or a cabinet that is big and strong enough for the size and weight of the product.
To use the product safely make sure that the height of the bracket that is mounted on the wall is same
as that of the product.
7
PREPARATION
BACK COVER FOR WIRE ARRANGEMENT
Connect the cables as necessary.
To connect additional equipment, see the External Equipment Setup section.
2
Install the CABLE MANAGEMENT as shown.
PREPARATION
1
How to remove the CABLE
MANAGEMENT
G
Hold the CABLE MANAGEMENT
with both hands and pull it upward.
CABLE MANAGEMENT
3
Bundle the cables using the supplied twister holder.
(This Feature is not available for all models.)
! NOTE
G
TWISTER HOLDER
8
Do not hold the CABLE MANAGEMENT
when moving the product.
- If the product is dropped, you may be
injured or the product may be broken.
■
Image shown may be somewhat different from your TV.
Power Supply
PREPARATION
Short-circuit
Breaker
GROUNDING
Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods
are not possible, have a qualified electrician install a separate circuit breaker.
Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
DESKTOP PEDESTAL INSTALLATION
For proper ventilation, allow a clearance of 4inches on each side from the wall.
4 inches
4 inches
4 inches
4 inches
R
CAUTION
G
Ensure adequate ventilation by following the clearance recommendations.
9
PREPARATION
WALL MOUNT: HORIZONTAL INSTALLATION
For proper ventilation, allow a clearance of 4" on each side and from the wall.
Detailed installation instructions are available from your dealer.
PREPARATION
4 inches
4 inches
4 inches
4 inches
4 inches
10
■
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.
ANTENNA CONNECTION
Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections.
For optimum picture quality, adjust antenna direction if needed.
PREPARATION
VIDEO L/MONO AUDIO R
S-VIDEO
AV IN 3
AV 1
HDMI/DVI IN
1
Wall
Antenna
Socket
AV 2
RGB IN
HDMI IN
2
ANTENNA
IN
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
AUDIO
VIDEO
COMPONENT IN
VARIABLE
AUDIO OUT
ANTENNA
IN
Outdoor
Antenna
(VHF, UHF)
RF Coaxial Wire (75 ohm)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Antenna
ANTENNA
IN
UHF
VHF
Signal
Amplifier
To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.
If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.
■ If the antenna is not installed properly, contact your dealer for assistance.
■
■
! NOTE
G
The TV will let you know when the analogue, cable, and digital programme scans are complete.
11
EXTERNAL EQUIPMENT SETUP
HD RECEIVER SETUP
This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you
do receive digital signals from a digital set-top box or other digital external device, refer to the figure as
shown below.
This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,
576p, 720p, 1080i, 1080p).
RGB IN
HDMI/DVI IN
When connecting with a Component cables
DI
AUD
RGB (PC)
EXTERNAL EQUIPMENT SETUP
COMPONENT IN
1
Connect the video outputs (Y, PB, PR) of the digital2 set
top box to the COMPONENT IN VIDEO 1 jacks on
the set. Match the jack colors
1 (DVI)
(Y = green, PB = blue, and PR = red)
2
Connect the audio output of the digital set-top box to
the COMPONENT IN AUDIO 1 jacks on the set.
3
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
4
(CO
VIDEO
AUDIO
1
2
S-
Select C o m p o n e n t 1 input source using the INPUT
button on the remote control.
If connected to COMPONENT IN 2 input, select
C o m p o n e n t 2 input source.
Y
Signal
Component 1/2
HDMI1/DVI, HDMI2
480i
Yes
No
480p
Yes
Yes
576i
Yes
No
576p
Yes
Yes
720p
Yes
Yes
1080i
Yes
Yes
1080p
No
Yes
PB
PR
L
R
RGB IN
HDMI/DVI IN
12
RGB (PC)
AUDIO
(RGB/DVI)
COMPONENT IN
2
DIGITAL
AUDIO OUT
RGB IN
RGB (PC)
DIGITAL
AUDIO OUT
AUDIO
(RGB/DVI)
When connecting with HDMI cable
COMPONENT IN
1
RGB IN
Connect the digital set-top box to H D M I / D V I I N 1 or
2 jack on the set.
HDMI/DVI IN
RGB (PC)
AUDIO
(RGB/DVI)
DIGITAL
AUDIO OUT
COMPONENT IN
VIDEO
2
No separate audio connection is necessary.
AUDIO
4
Select H D M I 1 / D V I or H D M I 2 input source using the
I N P U T button on the remote control.
1(DVI)
VIDEO
1
! NOTE
G
If the digital set-top box supports Auto HDMI function, the
output resolution of the source device will be automatically
set to 1280x720p.
G
If the digital set-top box player does not support Auto
HDMI, you need to set the output resolution appropriately.
To get the best picture quality, adjust the output resolution
of the source device to 1280x720p.
HDMI-DTV OUTPUT
AUDIO
EXTERNAL EQUIPMENT SETUP
3
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
2
13
EXTERNAL EQUIPMENT SETUP
When connecting HDMI to DVI cable
ANTENNA
IN
RGB (PC)
AUDIO
(RGB/DVI)
REMOTE
CONTROL IN
DIGITAL
AUDIO OUT
OPTICAL
VIDEO
AV OUT
RGB IN
HDMI/DVI IN
RS-232C IN
(CONTROL & SERVICE)
COMPONENT IN
2
EXTERNAL EQUIPMENT SETUP
1 (DVI)
VIDEO
14
S-VIDEO VIDEO
(MONO) AUDIO
2
1
DVI-DTV OUTPUT
AUDIO
AV IN 1
AUDIO
L
R
1
Connect the DVI output of the digital set-top box to the H D M I/DVI IN 1 jack on the set.
2
Connect the audio output of the digital set-top box to the A U D I O ( R G B / D V I ) jack on the set.
3
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
4
Select H D M I 1 / D V I input source using the I N P U T button on the remote control.
DVD SETUP
RGB IN
HDMI/DVI IN
DIGI
AUDIO
RGB (PC)
When connecting Component cables
COMPONENT IN
1
(C
1 (DVI)
VIDEO
2
Connect the audio outputs of the DVD to the C O M P ON E N T I N A U D I O 1 jacks on the set.
3
Turn on the DVD player, insert a DVD.
4
Select C o m p o n e n t 1 input source using the INPUT
button on the remote control.
If connected to C O M P O N E N T I N 2 input, select
C o m p o n e n t 2 input source.
5
Refer to the DVD player's manual for operating instructions.
AUDIO
1
Y
PB
2
PR
L
S-
EXTERNAL EQUIPMENT SETUP
Connect the video outputs (Y, PB, PR) of the2 DVD to the
C O M P O N E N T I N V I D E O 1 jacks on the set.
Match the jack colours (Y = green, PB = blue, and PR = red).
R
Component Input ports
To get better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV
Video output ports
on DVD player
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
15
EXTERNAL EQUIPMENT SETUP
HDMI/DVI IN
RGB IN
DIGITAL
AUDIO OUT
RGB (PC)
When connecting
with an S-Video cable
COMPONENT IN
2
1 (DVI)
DVI)
VIDEO
AUDIO
S-VIDEO VIDEO
EXTERNAL EQUIPMENT SETUP
1
S-VIDEO
16
(MONO)
AUDIO
AV IN 1
AUDIO
2
L
R
AUDIO
1
Connect the S-VIDEO output of the DVD to the S-VIDEO input on the set.
2
Connect the audio outputs of the DVD to the AUDIO input jacks on the set.
3
Turn on the DVD player, insert a DVD.
4
Select A V 1 input source using the I N P U T button on the remote control.
If connected to A V I N 2 input, select A V 2 input source.
5
Refer to the DVD player's manual for operating instructions.
When connecting HDMI cable
1
RGB IN
HDMI/DVI IN
RGB (PC)
COMPONENT IN
COMPONEN
No separate audio connection is necessary.
2
3
Select HDMI1/DVI or HDMI 2 input source using the
INPUT button on the remote control.
4
Refer to the DVD player's manual for operating instructions.
A
(R
1 (DVI)
VIDEO
1
EXTERNAL EQUIPMENT SETUP
2
Connect the HDMI output of the DVD to the
H D M I / D V I I N 1 or 2 jack on the set.
AUDIO
HDMI-DVD OUTPUT
! NOTE
G
If the DVD supports Auto HDMI function, the DVD output
resolution will be automatically set to 1280x720p.
G
If the DVD does not support Auto HDMI, you need to set
the output resolution appropriately.
To get the best picture quality, adjust the output resolution
of the DVD to 1280x720p.
17
COMPONENT IN
1 (DVI)
EXTERNAL EQUIPMENT SETUP
VIDEO
AUDIO
VIDEO
(
)
AUDIO
AV IN 1
2
VCR SETUP
■
■
To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the
screen. This phenomenon is common to all manufacturers and in consequence the manufacturer’s warranty
does not cover the product bearing this phenomenon.
HDMI/DVI IN
When connecting with an antenna
2
ANTENNA
IN
RGB IN
RGB (PC)
AUDIO
(RGB/DVI)
REMOTE
CONTROL IN
1
DIGITAL
AUDIO OUT
OPTICAL
S-VIDEO
ANT IN
OUTPUT
SWITCH
2
VIDEO
L
R
VIDEO
RS-232C IN
(CONTROL & SERVICE)
COMPONENT IN
ANT OUT
AV OUT
HDMI/DVI
DVI IN
AV IN 1
EXTERNAL EQUIPMENT SETUP
18
1 (DVI)
2
AUDIO
1 (DVI)
VIDEO
AUDIO
S-VIDEO VIDEO
(MONO) AUDIO
Wall Jack
Antenna
1
Connect the RF antenna out socket of the VCR to the A N T E N N A I N socket on the set.
2
Connect the antenna cable to the RF antenna in socket of the VCR.
3
Set VCR output switch to 3 or 4 and then tune TV to the same programme number.
4
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
HDMI/DVI IN
RGB IN
DIGITAL
AUDIO OUT
RGB (PC)
COMPONENT IN
2
When connecting with an RCA cable
AV IN 1
AUDIO
1 (DVI)
VIDEO
1
AUDIO
S-VIDEO VIDEO
Connect the AUDIO/V
VIDEO jacks between TV and
VCR. Match the jack colours(Video = yellow, Audio Left =
white, and Audio Right = red)
Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
3
Select A V 1 input source using the I N P U T button on
the remote control.
If connected to A V I N 2, select A V 2 input source.
AUDIO
1
VIDEO
L
R
S-VIDEO
ANT IN
OUTPUT
SWITCH
ANT OUT
EXTERNAL EQUIPMENT SETUP
2
(MONO)
! NOTE
G
HDMI/DVI IN
If you have a mono VCR, connect the audio cable from the
VCR to the A U D I O
L ( M O N O ) jack of the set.
ANTENNA
IN
RGB IN
DIGITAL
AUDIO OUT
RGB (PC)
COMPONENT IN
2
1 (DVI)
VIDEO
AUDIO
19
EXTERNAL EQUIPMENT SETUP
HDMI/DVI IN
RGB IN
DIGITAL
AUDIO OUT
RGB (PC)
When connecting with an S-Video cable
COMPONENT IN
2
1
EXTERNAL EQUIPMENT SETUP
2
1 (DVI)
Connect the S-VIDEO
output of the VCR to the S-VIDEO
VIDEO
input on the set.
AUDIO
S-VIDEO VIDEO
(MONO)
AUDIO
AV IN 1
AUDIO
Connect the audio outputs of the VCR to the AUDIO
input jacks on the set.
2
1
3
Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
4
Select A V 1 input source using the INPUT button on
the remote control.
If connected to A V I N 2 input, select A V 2 input
source.
S-VIDEO
VIDEO
L
R
ANT IN
OUTPUT
SWITCH
ANT OUT
CAUTION
! NOTE
G
20
The picture quality is improved: ; compared to normal
composite (RCA cable) input.
G
Do not connect to both Video
and S-Video at the same time. In
the event that you connect both
Video and the S-Video cables,
only the S-Video will work.
OTHER A/V SOURCE SETUP
Select A V 2 input source using the INPUT button on
the remote control.
If connected to AV IN1 input, select A V 1 input source.
3
Operate the corresponding external equipment.
Video Game Set
VIDEO
L
S-VIDEO
L/MONO
MONO AUDIO R
VIDEO L/
2
Camcorder
1
R
EXTERNAL EQUIPMENT SETUP
1
Connect the AUDIO/V
VIDEO jacks between TV and
external equipment. Match the jack colours.(Video = yellow, Audio Left = white, and Audio Right = red)
AV IN 2
21
EXTERNAL EQUIPMENT SETUP
PC SETUP
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
The TV perceives 1024x768, 60Hz as DTV 720p based on the PC graphic card. If necessary, change the
screen scanning rate for the graphic card accordingly.
When connecting D-sub 15pin cable
EXTERNAL EQUIPMENT SETUP
RGB IN
AUDIO
(RGB/DVI)
1
DIGITAL
Connect theAUDIO
RGB
output of the PC to the R G B
OUT
(P C ) jack on the set.
ANTEN
IN
RGB IN
HDMI/DVI IN
RGB (PC)
REMOTE
CONTROL IN
2
Connect the PC audio output to the AUDIO
(RGB/DVI) j ack on the set.
2
(DVI)
VIDEO
VIDEO
3
Turn on the PC and the set.
4
Select RGB-PC input source in input option of Special
menu.
AUDIO
1
5
AUDIO
2
Once you select RGB-PC in input option of Special
menu, INPUT button is also available for this purpose.
! NOTE
G
22
Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or
brightness in PC mode. If noise is present, change the PC
output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the
VIDEO menu until the picture is clear. If the refresh rate of
the PC graphic card can not be changed, change the PC
graphic card or consult the manufacturer of the PC
graphic card.
OPTICA
RS-232C IN
(CONTROL & SERVICE)
COMPONENT IN
COMPONENT IN
DIGITAL
DIGITA
AUDIO OUT
AUDIO
(RGB/DVI)
RGB OUTPUT
AUDIO
S-VIDEO VIDEO
(MON
When connecting HDMI to DVI cable
ANTENNA
IN
RGB (PC)
AUDIO
(RGB/DVI)
REMOTE
CONTROL IN
DIGITAL
AUDIO OUT
OPTICAL
HDMI/DV
VIDEO
AV OUT
RGB IN
HDMI/DVI IN
RS-232C IN
(CONTROL & SERVICE)
COMPONENT IN
2
1
DVI-PC
OUTPUT
AUDIO
S-VIDEO VIDEO
(MONO) AUDIO
AV IN 1
VIDEO
2
L
EXTERNAL EQUIPMENT SETUP
AUDIO
1 (DVI)
R
1
Connect the DVI output of the PC to the H D M I / D V I I N 1 jack on the set.
2
Connect the PC audio output to the AUDIO (RGB/DVI) jack on the set.
3
Turn on the PC and the set.
4
Select HDMI1/DVI input source using the INPUT button on the remote control.
! NOTE
G
If the PC has a DVI output and no HDMI output, a separate audio connection is necessary.
G
If the PC does not support Auto DVI, you need to set the output resolution appropriately. To get the
best picture quality, adjust the PC graphics card's output resolution to 1024x768, 60Hz.
23
(DVI)
EXTERNAL EQUIPMENT SETUP
! NOTES
EXTERNAL EQUIPMENT SETUP
G
To get the the best picture quality, adjust the PC
graphics card to 1280x768, 60Hz.
G
Depending on the graphics card, DOS mode may
not work if a HDMI to DVI Cable is in use.
G
When Source Devices are connected with
HDMI/DVI Input, the output PC Resolution(VGA,
SVGA, XGA), Position and Size may not fit on the
Screen. As shown in the picture below, press the
OK button to adjust the screen Position of the TV
SET and contact a PC graphics card service center.
When Source Devices connected with HDMI/DVI
Input, output TV SET Resolution (480p, 576p,
720p, 1080i, 1080p) and TV SET Display fit
EIA/CEA-861-B Specification to Screen. If not,
G
Supported Display Specifications (RGB/HDMI-PC )
G
G
Supported Display Specifications (HDMI-DTV)
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
720x400
31.468
70.08
720x576
31.25
50.00
640x480
31.469
37.500
59.94
75.00
720x480
31.47/31.50
59.94/60.00
1280x720
44.96/45.00
37.50
59.94/60.00
50.00
1920x1080i
28.125
33.72/33.75
50.00
59.94/60.00
1920x1080p
67.432/67.500
56.25
26.97/27.00
33.71/33.75
59.939/60.00
50.00
23.97/24.00
29.97/30.00
37.879
46.875
60.31
75.00
1024x768
48.363
56.476
60.023
60.00
70.06
75.02
1280x768
47.776
59.870
1360x768
47.720
59.799
1366x768
47.13
59.65
800x600
24
G
refer to the Manual of HDMI/DVI Source Devices
or contact your service centre.
If the HDMI/DVI Source Device is not connected
to the Cable or if there is a poor cable connection, "No signal" is displayed in the HDMI/DVI
Input. In this case, that Video Resolution is not
supported. If "Invalid Format" is displayed, refer to
the Source Device manual or contact your service
centre.
Avoid keeping a fixed image on the screen for a
long period of time. The fixed image may become
permanently imprinted on the screen.
The synchronization input form for Horizontal
and Vertical frequencies is separate.
Screen Setup for PC mode
Overview
This function works in the following mode:
Component1, Component2, RGB-PC, HDMI1/DVI or HDMI2.
Resolution function works only RGB-PC mode.
(1024/1280/1360/1366x768, 60Hz)
Note: Some signal from some graphics boards may not function properly. If the results are unsatisfactory, adjust
your monitor’s position, size and phase manually.
Resolution G
1024 x 768
1280 x 768
Position
1360 x 768
Clock
1
Press the O K button and then use D or E button to select
R e s o l u t i o n , P o s i t i o n, C l o c k, or P h a s e.
1366 x 768
Phase
Reset
2
The P h a s e adjustment range is - 3 2 ~ + 3 2.
The P h a s e only works in RGB-PC mode.
■ The C l o c k adjustment range is - 5 0 ~ + 5 0.
The C l o c k only works in RGB-PC mode.
■
3
Close
Press the G button and then use D or E or F or G button to make appropriate adjustments.
Press the O K button.
Initializing (Reset to original factory values)
1
2
3
Resolution This function allows you select
resolution of XGA/WXGA. (Up
to 1366x768, 60Hz)
Position This function is to adjust picture to
left/right and up/down as you prefer.
Clock
This function is to minimize any vertical bars or stripes visible on the
screen background. And the horizontal screen size will also change.
Phase
This function allows you to remove
any horizontal noise and clear or
sharpen the image of characters. In
HDMI/DVI-PC mode, PHASE is not
available.
EXTERNAL EQUIPMENT SETUP
Adjustment for screen Resolution, Position,
Clock and Phase
To initialize the adjusted values
This function allows you to return to the good picture reproduction programmed at the factory and cannot be change.
Resolution
1
Press the O K button and then use D or E button to select
R e s e t.
Position
Initialize Settings
Clock
Phase
2
Press the G button and then use F or G button to select
Y e s.
Yes
MENU
3
Press the O K button.
No
Reset
Prev
F G Select
1
OK
2
3
25
EXTERNAL EQUIPMENT SETUP
AV OUTPUT SETUP
The TV has a special signal output capability which allows you to hook up a second TV or monitor.
RGB IN
DIGITAL
AUDIO OUT
RGB (PC)
REMOTE
ONTROL IN
1
Connect the second TV or monitor to the
TV’s AV OUT jacks.
OPTICAL
VIDEO
AV OUT
HDMI/DVI IN
RS-232C IN
NTROL & SERVICE)
COMPONENT IN
2
2
VIDEO
AUDIO
IDEO VIDEO
(MONO)
AV IN 1
EXTERNAL EQUIPMENT SETUP
26
AUDIO
See the Operating Manual of the second TV or monitor
1 (DVI)
for further
details regarding that device’s input settings.
AUDIO
1
! NOTE
G
Digital, Component1-2, RGB-PC, HDMI1/DVI, HDMI2
input sources cannot be used for AV out.
G
We recommend to use the AV OUT jacks for VCR recording.
VIDEO
L
R
S-VIDEO
DIGITAL AUDIO OUTPUT SETUP
Send the TV’s audio to external audio equipment via the Digital Audio Output (Optical) port.
Connect one end of an optical cable to the TV Digital
Audio (Optical) Output port.
O
DVI)
REMOTE
CONTROL IN
DIGITAL
AUDIO OUT
OPTICAL
PTICAL
VIDEO
AV OUT
1
IN
RGB IN
RGB (PC)
RS-232C IN
(CONTROL & SERVICE)
COMPONENT IN
N
2
VIDEO
3
1
Connect the other end of the optical cable to the digi(DVI)
tal audio (optical) input on the 1audio
equipment.
Set the “TV Speaker option - Off” in the AUDIO
menu. See the external audio equipment instruction
manual for operation.
AUDIO
S-VIDEO VIDEO
2
AUDIO
(MONO)
AUDIO
EXTERNAL EQUIPMENT SETUP
2
AV IN 1
HDMI/DVI IN
! NOTE
G
When connecting with external audio equipments, such
as amplifiers or speakers, please turn the TV speakers
off.
CAUTION
G
Do not look into the optical output port. Looking at the
laser beam may damage your vision.
27
WATCHING TV/PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
D/A INPUT Selects digital or analogue mode.
(Digital TV /
Analogue TV)
INPUT
D/A
MODE
TV
POWER
INPUT
POWER Switches the set between ON and STANDBY.
WATCHING TV/PROGRAMME CONTROL
SIMPLINK See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu appears
at the screen G p. 46-47
BRIGHT Adjusts brightness on screen.
It returns to the default settings brightness by changing
mode source.
VCR
BRIGHT
SIMPLINK
DVD
RATIO TEXT INFO
1
SUBTITLE
MENU
EXIT
!
INPUT External input modes rotate in regular sequence: Digital,
Analogue, AV1-2, Component 1-2, RGB-PC,
HDMI1/DVI, HDMI2.
GUIDE
LIST
FAV
VCR/DVD Control some video cassette recorders or DVD players
control buttons ("RECORD" button is not available for DVD player).
OK
OK Accepts your selection or displays the current mode.
THUMBSTICK Adjusts menu settings.
(Up/Down/Left
Right) Selects menu item.
VOLUME Increase/decrease the sound level.
UP/DOWN
Q.VIEW
VOL
Q.VIEW Returns to the previously viewed programme.
PR
MUTE
1
2
3
4
5
6
7
8
9
APM
0
SLEEP
SIZE
INDEX
TIME
MUTE Switches the sound on or off.
PROGRAMME Selects a programme.
UP/DOWN
PAGE UP/DOWN Move from one full set of screen information to the next
one.
NUMBER button Selects a programme. Selects numbered items in a menu.
APM Concurrently, compare with the Dynamic, Standard, Mild,
User1 and User2 on the screen.
SLEEP Sets the sleep timer.
I/II Selects the sound output or the audio mode.
28
?
REVEAL
I/II
PAGE
TV, VCR, DVD Selects the remote operating mode: TV, VCR, DVD. Select other operating modes, for the
remote to operate external devices.
RATIO Selects your desired picture format.
!
INFOoo Shows the present screen information.
GUIDE Shows a programme schedule.
EXIT Returns to TV viewing from any menu.
SUBTITLE Recalls your preferred subtitle in digital mode.
MENU Selects a menu.
LIST Displays the programme table.
FAV Displays the selected favourite programmes.
(FAVOURITE)
1
TELETEXT These buttons are used for teletext.
BUTTONS Text button is used to enable teletext services while other buttons are for teletext functions.
* For further details, see the ‘Teletext’ section.
Installing Batteries
WATCHING TV/PROGRAMME CONTROL
Coloured They are used as per the indications or functions displayed on the TV screen in the case of
buttons Text displays (Teletext, EPG) and programme edit.
Remote control effective range
R
INPUT
D/A
MODE
TV
POWER
INPUT
VCR
BRIGHT
DVD
SIMPLINK
■
Install two 1.5V AA batteries. Don’t mix old or
used batteries with new ones.
Close cover.
RATIO TEXT
INFO
GUIDE
!
■
Open the battery compartment cover on the back
side and install the batteries matching correct
polarity (+with +, -with -).
!
■
■
Use a remote control up to 7 meters distance and
30 degree (left/right) within the receiving unit
scope.
■
Dispose of used batteries in a recycle bin to
preserve environment.
29
WATCHING TV/PROGRAMME CONTROL
TURNING ON THE TV
INPUT
D/A
MODE
TV
POWER
INPUT
VCR
BRIGHT
If your TV will be turned on, you will be able to use its features.
DVD
SIMPLINK
Ensure the power cord is connected correctly.
When connected to power the TV switches to standby mode.
■ In standby mode, press the
, INPUT, P R (D or E)
button on the TV or press the POWER, INPUT, D/A
INPUT, PR (+ or - ), Number (0~9
9 ) button on the
remote control.
1
SUBTITLE
LIST
MENU
FAV
OK
WATCHING TV/PROGRAMME CONTROL
Q.VIEW
VOL
PR
MUTE
When finished using the TV, press the POWER button on
the remote control. The TV reverts to standby mode.
3
GUIDE
EXIT
Select the viewing source by using the INPUT button on
the remote control.
■ This TV is programmed to remember which mode it was
last set to, even if you turn the TV off.
2
INFO
!
RATIO TEXT
1
2
3
4
5
6
7
8
9
APM
0
SLEEP
! NOTE
G
If you intend to be away on vacation, disconnect the
power plug from the wall power outlet.
INITIALIZING SETUP
Installation Guide
If the OSD (On Screen Display) is displayed on the screen
as figure 1 after turning on the set, you can adjust the Auto
Programme tuning, Time Zone selection or Password setting.
1
Welcome
The Following process guides you
to complete initial settings. This
initial setup appears the first
time you turn the TV on. The
settings can be changed in menu
once entered.
Next
! NOTE
G
30
It will automatically disappear after approx. 40 seconds
unless a button is pressed.
Figure 1.
PAGE
PROGRAMME SELECTION
Q.VIEW
VOL
Automatically finds all programmes available through
antenna or cable inputs, and stores them in memory on
the programme list.
1
Press the P R + or - or NUMBER buttons to select a
programme number.
PAGE
MUTE
1
2
3
4
5
6
7
8
9
APM
0
SLEEP
SIZE
INDEX
TIME
?
I/II
REVEAL
INPUT
D/A
MODE
TV
POWER
INPUT
VCR
BRIGHT
DVD
SIMPLINK
1
Press the V O L + or - button to adjust the volume.
RATIO TEXT
SUBTITLE
INFO
MENU
EXIT
!
Adjust the volume to suit your personal preference.
GUIDE
WATCHING TV/PROGRAMME CONTROL
VOLUME ADJUSTMENT
PR
LIST
FAV
OK
2
If you want to switch the sound off, press the M U T E button.
Q.VIEW
VOL
3
You can cancel the Mute function by pressing the M U T E,
I / I I or VOL + or - button.
PR
PAGE
MUTE
1
2
3
4
5
6
7
8
9
APM
0
SLEEP
SIZE
INDEX
TIME
?
REVEAL
I/II
31
WATCHING TV/PROGRAMME CONTROL
EPG (ELECTRONIC PROGRAMME GUIDE)
- In Digital Mode Only
INPUT
D/A
MODE
TV
POWER
INPUT
VCR
BRIGHT
SIMPLINK
The EPG supplies information such as programme listings, start and end times
for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these
programme details will vary, depending on the particular broadcaster).
RATIO TEXT
SUBTITLE
INFO
MENU
EXIT
WATCHING TV/PROGRAMME CONTROL
The EPG displays the programme description for next 7 days.
Switch on/off EPG
1
Press the G U I D E button to switch on EPG.
2
Press the G U I D E or E X I T button again to switch off EPG and return to TV viewing.
Select a programme
1
32
Press the D or E or F or G buttons to select desired programme, then press the O K
button to display the selected programme.
GUIDE
LIST
FAV
OK
This function can be used only when the EPG information is broadcasted by
broadcasting companies.
!
This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options.
DVD
Button Function in NOW/NEXT Guide Mode
Function
Change to 7Day’s EPG Guide
Shows the Schedule List
Selects the Radio programmes
Select the Broadcasting Programme
Switch off EPG
The detail information on or off
Button Function in 7 Days Guide Mode
Remote Control Buttons
GREEN
RED
YELLOW
BLUE
D/E/F/G
EXIT
Page Move
Day Move
INFO i
WATCHING TV/PROGRAMME CONTROL
Remote Control Buttons
GREEN
YELLOW
BLUE
D/E/F/G
EXIT
INFO i
Function
Change to Now/Next Guide
Enter Timer Reservation/Cancel setting mode
Shows the Schedule List
Selects the Radio programmes
Select the Broadcasting Programme
Switch off EPG
Selects the page
Selects the day
The detail information on or off
33
WATCHING TV/PROGRAMME CONTROL
Button Function in Extended Description Box
Digital
WATCHING TV/PROGRAMME CONTROL
Remote Control Buttons Function
Change to the selected channel
INFO i
The detail information on or off
Button Function in Reservation Setting Mode
Schedule List
Remote Control Buttons Function
YELLOW
Change to Guide
PR +/ Page Up/Down
Delete the selected item
34
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.
1
Press the M E N U button and then use D or E button to select the each menu.
2
Press the G button and then use D or E or F or G buttons to display the available menus.
SETUP
PICTURE
PSM
Manual programme
Color Temperature
Programme edit
XD
Signal strength
Advanced
Set ID
Video preset
LOCK
AUDIO
Lock system
SSM
Set password
AVL
Block programme
Balance
Parental guidance
TV Speaker
WATCHING TV/PROGRAMME CONTROL
Auto programme
Aux. block
SPECIAL
TIME
Input
Auto clock
Subtitle
Manual clock
Child lock
Off time
ARC
On time
XD demo
Sleep timer
SIMPLINK
Auto sleep
35
POWER
WATCHING TV/PROGRAMME CONTROL
AUTO PROGRAMME TUNING
SUBTITLE
WATCHING TV/PROGRAMME CONTROL
Up to 100 TV stations can be stored in this set by programme numbers (0 to 99). Once you have preset the stations, you will be able
to use the P R + or - or NUMBER buttons to scan the stations you
programmed. Stations can be tuned using automatic or manual
modes.
A password is required to gain access to Auto programme or Manual
programme menu if the Lock system is turned on.
If you forgot your password, press ‘7’, ‘7’, ‘7’, ‘7’ on the remote control.
In Australia, if no station name can be assigned to a station, the programme number is assigned and stored as ----- followed by a number
see ‘Assigning a station name’ section to assign the station name.
MENU
LIST
FAV
EXIT
OK
Q.VIEW
VOL
PR
PAGE
MUTE
1
2
3
4
5
6
7
8
9
Auto programme
1
Manual programme
Press the M E N U button and then D or E button to
select the SETUP menu.
Programme edit
Signal strength
Set ID
2
Press the G button and then D or E button to select
A u t o p r o g r a m m e.
1
3
Press the G button to select S t o r a g e f r o m .
Select the beginning programme number with the D or
E button or NUMBER buttons.
Auto programme
G
Manual programme
Storage from
D
E
0
G
To start
Programme edit
Signal strength
Set ID
4
Press the G button to select T o s t a r t.
2
5
Press the O K button to begin auto programming.
All receivable stations are stored.
Auto programme
Manual programme
G
Storage from
To start
Programme edit
To stop auto programming, press the O K button.
When auto programming is completed, the
P r o g r a m m e e d i t menu appears on the screen. See
the ‘Programme Edit’ section to edit the stored programme.
Signal strength
0
G
Processing
Auto programme...
All of service-information
will be updated.
Set ID
26 %
5 channels found
Press (OK) to start
digital programme scan.
MENU Prev
Press
(OK) to start.
4
6
36
Press E X I T button to return to normal TV viewing.
3
5
MANUAL PROGRAMME TUNING
INPUT
D/A
POWER
MODE
TV
POWER
INPUT
VCR
BRIGHT
In Digital Mode
DVD
SIMPLINK
INFO
!
RATIO TEXT
GUIDE
Manual programme lets you manually add a programme to
your programme list.
SUBTITLE
MENU
LIST
FAV
EXIT
OK
1
Manual programme
Programme edit
Signal strength
Set ID
2
Press the G button and then use D or E button to
select M a n u a l p r o g r a m m e .
1
3
Press the G button and then use D or E button to
select the programme number you want to add.
Auto programme
Manual programme G
Programme edit
Signal strength
4
Press the O K button to store the programme. When
the programme number you want to add is already
added in programme list, the message “ A l r e a d y p r ogrammed channel. Do you want to update?”
will appear. If you want to keep on manual programming, select YES with using F or G button . Then,
press the O K button. Otherwise select N O.
When the programme is stored, the Programme edit
menu appears on the screen. See the ‘Programme Edit’
section to edit the stored programme.
Set ID
Auto programme
Manual programme
Signal strength
Set ID
5
7
Signal strength
2
Programme edit
Press E X I T button to return to normal TV viewing.
Select the digital
channel
for manual scanning
WATCHING TV/PROGRAMME CONTROL
Auto programme
Press the M E N U button and then use D or E button
to select the S E T U P menu.
Select the digital
channel
for manual scanning
D
E
7
Signal strength
3
4
37
WATCHING TV/PROGRAMME CONTROL
MANUAL PROGRAMME TUNING Continued
INPUT
D/A
POWER
MODE
TV
POWER
INPUT
VCR
BRIGHT
In Analogue Mode
DVD
SIMPLINK
INFO
!
RATIO TEXT
GUIDE
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
SUBTITLE
MENU
LIST
FAV
EXIT
WATCHING TV/PROGRAMME CONTROL
1
Press the M E N U button and then use D or E button
to select the SETUP menu.
2
Press the G button and then use D or E button to
select M a n u a l p r o g r a m m e .
OK
Auto programme
Manual programme
Programme edit
Signal strength
3
Press the G button to select B a n d. Press the D or E
button to select V / U H F or C a b l e as required.
4
Press the G button to select C h a n n e l . Press the D
or E button to select the desired channel number.
Set ID
1
Auto programme
5
Press the G button to select S e a r c h. Press the D or
E button to commence searching. If a station is found
the search will stop.
Manual programme G
Band
Programme edit
Channel
V/UHF
Signal strength
Search
Up/Down
Set ID
Fine
Up/Down
1
Name
-----
Storage
6
0
If this station is the one required, press the F or G
button to select Storage. Select the desired programme number with the D or E button.
2
Auto programme
7
Press the O K button to store it.
D
E
Band
Programme edit
Channel
Signal strength
Search
Up/Down
Set ID
Fine
Up/Down
1
Name
-----
Storage
8
38
0
To store another station, repeat steps 3 to 7.
Press
3
9
V/UHF G
Manual programme
Press E X I T button to return to normal TV viewing.
(OK) to store.
4
5
6
7
FINE TUNING - In Analogue Mode only
INPUT
D/A
POWER
MODE
TV
POWER
INPUT
VCR
BRIGHT
Normally fine tuning is only necessary if reception is poor.
The finely tuned programme will be indicated by a yellow
number during programme selection.
DVD
SIMPLINK
SUBTITLE
INFO
MENU
!
RATIO TEXT
GUIDE
LIST
FAV
EXIT
OK
1
Manual programme
Programme edit
Signal strength
Set ID
2
Press the G button and then use D or E button to
select Manual programme.
1
3
Press the G button and then F or G button to
select F i n e.
4
Press the D or E button to fine tune for the best
picture and sound.
5
Press the O K button to store.
Auto programme
Manual programme G
Band
Programme edit
Channel
V/UHF
Signal strength
Search
Up/Down
Set ID
Fine
Up/Down
1
Name
WATCHING TV/PROGRAMME CONTROL
Auto programme
Press the M E N U button and then use D or E button
to select the S E T U P menu.
-----
Storage
0
2
Auto programme
6
Press E X I T button to return to normal TV viewing.
Manual programme
Band
Programme edit
Channel
V/UHF
Signal strength
Search
Set ID
Fine
1
Up/Down
D
E
Name
-----
Storage
Press
Up/Down G
0
(OK) to store.
3
4
5
39
WATCHING TV/PROGRAMME CONTROL
ASSIGNING A STATION NAME - In Analogue Mode only
POWER
INPUT
D/A
MODE
TV
POWER
INPUT
VCR
BRIGHT
You can assign a station name to each programme number.
DVD
SIMPLINK
SUBTITLE
INFO
MENU
!
RATIO TEXT
GUIDE
LIST
FAV
EXIT
OK
WATCHING TV/PROGRAMME CONTROL
Auto programme
1
Press the M E N U button and then use D or E button
to select the SETUP menu.
Manual programme
Programme edit
Signal strength
Set ID
2
Press the G button and then use D or E button to
select Manual programme.
1
3
4
5
Press the G button and then use F or G button to
select N a m e.
Press the D or E button. You can use the numeric 0
to 9 , the alphabet A to Z + , - , and blank.
Auto programme
Manual programme G
Band
Programme edit
Channel
V/UHF
Signal strength
Search
Up/Down
Set ID
Fine
Up/Down
1
Name
-----
Storage
0
Press the F or G button to select the position and
make your choice of the second character, and so on.
2
Auto programme
6
Press the O K button to store.
Manual programme
Band
Programme edit
Channel
V/UHF
Signal strength
Search
Set ID
Fine
1
Up/Down
Up/Down
D
E
Name
Storage
7
0
Press E X I T button to return to normal TV viewing.
Press
(OK) to store.
3
40
G
-----
4
5
PROGRAMME EDIT
INPUT
D/A
MODE
TV
POWER
INPUT
VCR
BRIGHT
This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or copy blank station data into the
selected programme number.
DVD
SIMPLINK
INFO
SUBTITLE
!
RATIO TEXT
GUIDE
LIST
MENU
FAV
EXIT
OK
1
Manual programme
Programme edit
Signal strength
Set ID
2
Press the G button and then use D or E button to
select Programme edit..
1
3
Press the G button.
Auto programme
Manual programme
Programme edit
4
■ Deleting a programme (In Analogue Mode Only)
a. Select a programme to be deleted with the D or E
or F or G buttons.
b. Press the R E D button twice. The selected programme is deleted, all the following programmes
are shifted up one position.
Copying a programme (In Analogue Mode Only)
a. Select a programme to be copied with the D or E
or F or G buttons.
b. Press the G R E E N button.
c. Move the programme to the desired programme
number with the D or E or F or G buttons.
d. Press the G R E E N button again to copy the programme. All the following programmes are shifted
down one position.
Signal strength
Set ID
G
Selection ( Gor ) leads
you to the programme edit
screen.
WATCHING TV/PROGRAMME CONTROL
Auto programme
Press the M E N U button and then use D or E button
to select the S E T U P menu.
2
■
3
4
5
41
WATCHING TV/PROGRAMME CONTROL
INPUT
D/A
MODE
TV
POWER
INPUT
VCR
BRIGHT
DVD
SIMPLINK
RATIO TEXT
INFO
SUBTITLE
!
Moving a programme (In Analogue Mode Only)
a. Select a programme to be moved with D or E or
F or G buttons.
b. Press the Y E L L O W button.
c. Move the programme to the desired programme
number with the D or E or F or G buttons.
d. Press the Y E L L O W button again to release this
function.
■
GUIDE
LIST
MENU
FAV
EXIT
Skipping a programme number
a. Select a programme number to be skipped with D
or E or F or G buttons.
b. Press the B L U E button. The skipped programme
number turns to blue.
c. Press the B L U E button again to release the
skipped programme.
When a programme number is skipped it means that
you will be unable to select it using the P R + or button during normal TV viewing. If you want to
select the skipped programme, directly enter the programme number with the NUMBER buttons or select
it in the programme edit or table menu.
■
WATCHING TV/PROGRAMME CONTROL
Q.VIEW
VOL
Selecting Favourite Programme
a. Select your favourite programme number with D or
E or F or G buttons and then press the F A V
button. It will automatically include the selected
programme into your favourite programmes list and
a heart mark will appear in front of that programme
number. You can store up to 10 programmes.
■
Repeatedly press the F A V button to select stored
favourite programmes in normal TV viewing.
PR
MUTE
1
2
3
4
5
6
7
8
9
APM
0
SLEEP
SIZE
INDEX
TIME
?
REVEAL
5
42
OK
I/II
PAGE
CALLING UP THE PROGRAMME LIST
INPUT
You can check the programmes stored in the memory by
displaying the programme list.
D/A
MODE
TV
POWER
INPUT
VCR
BRIGHT
SIMPLINK
DVD
INFO
!
RATIO TEXT
GUIDE
Displaying programme list
■
Press the L I S T button to display the Programme
table menu.
The programme list appears on the screen.
G
G
You may find some blue programmes.
They have been set up to be skipped by auto programming
or in the programme edit mode.
Some programmes with the channel number shown in the
programme LIST indicate there is no station name assigned.
MENU
FAV
OK
Q.VIEW
PR
VOL
MUTE
1
2
3
4
5
6
7
8
9
APM
0
SLEEP
SIZE
INDEX
TIME
?
Selecting a programme in the programme list
1
Select a programme with the D or E or F or G
buttons.
2
The set switches to the chosen programme number.
LIST
REVEAL
I/II
PAGE
WATCHING TV/PROGRAMME CONTROL
! NOTE
SUBTITLE
EXIT
Paging through a programme list
1
Press the P R + or - button to changes current page
into previous/next page.
2
Press the L I S T button to return to normal TV viewing.
43
WATCHING TV/PROGRAMME CONTROL
INPUT SOURCE SELECTION
INPUT
D/A
MODE
TV
POWER
INPUT
VCR
BRIGHT
Alternatively you can select the Digital, Analogue, AV1-2,
Component 1-2, RGB-PC, HDMI1/DVI or HDMI 2 mode
by pressing the INPUT button.
Press the D/A INPUT button to select digital or analogue
mode.
SIMPLINK
DVD
SUBTITLE
INFO
MENU
!
RATIO TEXT
GUIDE
LIST
FAV
EXIT
OK
WATCHING TV/PROGRAMME CONTROL
Input
1
Press the M E N U button and then use D or E button
to select the SPECIAL menu.
Subtitle
Child lock
ARC
XD demo
SIMPLINK
2
Press the G button and then use D or E button to
select Input.
1
3
Press the G button and then use D or E to select
Digital, Analogue, AV 1 , AV 2 , Component 1,
Component 2, RGB-PC, HDMI1/DVI or HDMI 2.
Input
Subtitle
Child lock
ARC
XD demo
POWER
4
Press E X I T button to return to normal TV viewing.
SIMPLINK
G
Digital
Analogue
AV1
AV2
Component1
Component2
RGB-PC
HDMI1/DVI
HDMI2
2
44
3
KEY LOCK
INPUT
D/A
POWER
MODE
TV
POWER
INPUT
VCR
BRIGHT
The TV can be set so that the remote control is needed to
control it. This feature can be used to prevent unauthorized viewing.
DVD
SIMPLINK
SUBTITLE
INFO
MENU
!
RATIO TEXT
GUIDE
LIST
FAV
EXIT
OK
1
Subtitle
Child lock
ARC
XD demo
SIMPLINK
Press the G button and then use D or E button to
select Child lock.
2
1
Press the G button and then use D or E button to
select O n or O f f.
3
Input
Subtitle
Child lock
ARC
Press E X I T button to return to normal TV viewing.
4
G
Off
WATCHING TV/PROGRAMME CONTROL
Input
Press the M E N U button and then use D or E button
to select the SPECIAL menu.
On
XD demo
SIMPLINK
2
3
! NOTE
G
With the lock on, the display ‘ C h i l d l o c k : O n ’
appears on the screen if any button on the front
panel is pressed while viewing the TV.
G
The display ‘ C h i l d l o c k : O n ’ will not appear on
the screen if any button on the front panel is
pressed while displaying the menus.
45
WATCHING TV/PROGRAMME CONTROL
This operates only for the devices with the SIMPLINK
logo. Please check the SIMPLINK logo.
INPUT
D/A
MODE
TV
POWER
INPUT
VCR
BRIGHT
SIMPLINK
DVD
RATIO TEXT
INFO
!
This allows you to control and play other AV devices
connected to the display through HDMI cable without
additional cables and settings.
GUIDE
If you do not want SIMPLINK menu, select “Off ”.
SUBTITLE
MENU
LIST
FAV
EXIT
WATCHING TV/PROGRAMME CONTROL
OK
1
Press the M E N U button and then use D or E
button to select the S P E C I A L menu.
Input
Subtitle
Child lock
ARC
XD demo
2
Press the G button and then use D or E button
to select SIMPLINK.
3
Press the G button and then use D or E button
to select O n or O f f.
SIMPLINK
1
Input
Subtitle
Child lock
4
Press E X I T button to return to normal TV viewing.
ARC
XD demo
SIMPLINK
G
Off
On
POWER
2
46
3
SIMPLINK Functions
Disc playback
Control connected AV devices by pressing the D or E or F or G, O K buttons and buttons for play, stop, pause, fast
reverse, fast forward, chapter skip.(The
button does not provide such functions)
Direct Play
After connecting AV devices to TV, you can directly control the devices and play media without additional settings.
Select AV device
Enables you to select one of AV devices connected to TV and play it.
Power off all devices
When you power off TV, all connected devices are turned off.
* A device, which is connected to TV through HDMI cable but does not support Simplink, does not provide this function.
SIMPLINK Menu
Press the D or E or F or G button and then O K button to select the desired SIMPLINK source.
1
T V v i e w i n g : Switch to the previous TV programme
regardless of the current mode.
2
D I S C p l a y b a c k : Select and play discs. When multiple
discs are available, the titles of the discs are conveniently displayed at the bottom of the screen.
3
1
V C R p l a y b a c k : Play and control the connected VCR.
5
H D D R e c o r d i n g s p l a y b a c k : Play and control
recordings stored in HDD.
Audio Out to Home theatre/Audio Out to TV :
Select Home theatre or TV speaker for Audio Out.
Selected Device
2
3
4
G
4
5
G When
no device is
connected (displayed
in gray)
WATCHING TV/PROGRAMME CONTROL
Switch audio-out
Offers an easy way to switch audio-out.
G When
a device is
connected (displayed
in bright colour)
! NOTE
Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the
SIMPLINK device with the HDMI cable.
G After connecting the HDMI terminal for the home theater with SIMPLINK function in the above method,
connect the VARIABLE AUDIO OUT terminal on the back of the TV to the VARIABLE AUDIO IN terminal
on the back of the SIMPLINK device with the VARIABLE AUDIO OUT cable.
G When operating the external device with SIMPLINK, press the TV button among the MODE button on the
remote controller.
G When you switch the Input source with the INPUT button on the remote controller, you can stop the
operation of device controlled by SIMPLINK.
G When you select or operate the media device with home theater function, the speaker automatically
switches to home theater speaker (HT speaker).
G
47
WATCHING TV/PROGRAMME CONTROL
DIGITAL SIGNAL STRENGTH - In Digital Mode only
INPUT
D/A
POWER
MODE
TV
POWER
INPUT
VCR
BRIGHT
Reveals how strong your DTV signal is and whether you
need to adjust your antenna.
The higher the signal strength, the less likely you are to
experience picture degradation.
Digital TV Signals; May not be available in all areas, nor
broadcast all programmes.
DVD
SIMPLINK
SUBTITLE
INFO
MENU
!
RATIO TEXT
GUIDE
LIST
FAV
EXIT
OK
WATCHING TV/PROGRAMME CONTROL
Auto programme
1
Press the M E N U button and then use D or E button to select the S E T U P menu.
Manual programme
Programme edit
Signal strength
Set ID
2
Press the G button and then use D or E button to
select S i g n a l s t r e n g t h .
1
3
View the on-screen signal strength monitor to see
the strength of the signal being received.
Auto programme
Manual programme
Programme edit
Bad
Normal
Good
Signal strength
4
Press E X I T button to return to normal TV viewing.
Set ID
2
48
PICTURE CONTROL
PICTURE SIZE(ASPECT RATIO)CONTROL
INPUT
D/A
MODE
TV
POWER
INPUT
VCR
BRIGHT
DVD
SIMPLINK
RATIO TEXT
INFO
!
You can watch TV in various picture formats; Auto, 4:3, 16:9 (Wide), 14:9,
Zoom and Cinema zoom.
GUIDE
! NOTE
G
SUBTITLE
MENU
EXIT
LIST
FAV
OK
Press the RATIO button repeatedly to select the desired picture format.
■
You can also adjust A R C in the SPECIAL menu.
Auto
Zoom
Selects the proper picture proportion to
match the source’s image. (4:3 4:3, 16:9
16:9)
Choose Zoom when you want to view the
picture without any alteration. However, the
top and bottom portions of the picture will be
cropped.
You can move the Zoom screen using D or E
button. The adjustment range is -16 - +16.
4:3
Choose 4:3 when you want to view a picture
with an original 4:3 aspect ratio.
Cinema Zoom
16:9
Adjust the picture horizontally, in a linear proportion to fill the entire screen.
14:9
The screen size is, more enlarged at both
sides, to create a spectacular view.
You can move the 14:9 screen using D or E
button. The adjustment range is -10 - +10.
WATCHING TV/PROGRAMME CONTROL
1
If a fixed image is displayed on the screen for a long time, it image may
become imprinted on the screen and remain visible.
This phenomenon is common to all manufacturers and in consequence the
manufacturer’s warranty does not cover the product bearing this phenomenon.
Choose Cinema Zoom when you want to
enlarge the picture in correct proportion.
Note: When enlarging or reducing the picture,
the
image may become distorted.
POWER
You can adjust the enlarge proportion of
Cinema Zoom using D or E button.
The adjustment range is 1-16.
! NOTE
G
G
In HDMI/DVI-PC and RGB-PC mode, 4:3 and 16:9 is available.
Auto: When your TV receives the wide screen signal, it will be automatically changed to the picture format
sent. (Not available in all countries)
49
PICTURE CONTROL
PRESET PICTURE SETTINGS
INPUT
D/A
POWER
MODE
TV
POWER
INPUT
VCR
PSM - PRESET
BRIGHT
DVD
SIMPLINK
This function adjusts the set to the best picture appearance.
When adjusting picture options (contrast, brightness, colour,
sharpness and tint) manually, PSM is automatically changed to
User.
Picture options Dynamic, Standard, and Mild are preset and
programmed for good picture quality at the factory and cannot
be changed.
SUBTITLE
INFO
MENU
!
RATIO TEXT
GUIDE
LIST
FAV
EXIT
OK
PICTURE CONTROL
PSM
1
Press the M E N U button and then use D or E button
to select the PICTURE menu.
Colour temperature
XD
Advanced
Video preset
2
Press the G button and then use D or E button to
select P S M.
1
3
4
Press the G button and then use D or E button to
select Dynamic, Standard, M i l d, User1, or User2.
Press E X I T button to return to normal TV viewing.
PSM
G
Dynamic
Colour temperature
Standard
XD
Mild
Advanced
User1
Video preset
User2
2
50
3
INPUT
D/A
POWER
MODE
TV
POWER
INPUT
VCR
BRIGHT
AUTO COLOUR TONE CONTROL
(WARM/MEDIUM/COOL)
DVD
SIMPLINK
Choose one of three automatic colour adjustments. Set to
warm to enhance hotter colours such as red, or set to cool
to see less intense colours with more blue.
SUBTITLE
INFO
MENU
!
RATIO TEXT
GUIDE
LIST
FAV
EXIT
OK
PSM
Colour temperature
XD
Advanced
Video preset
2
Press the G button and then use D or E button to
select Colour temperature.
1
3
Press the G button and then use D or E button to
select either W a r m, Medium, C o o l, or U s e r.
PSM
Colour temperature
4
Press E X I T button to return to normal TV viewing.
PICTURE CONTROL
1
Press the M E N U button and then use D or E button
to select the PICTURE menu.
G
Warm
XD
Medium
Advanced
Cool
Video preset
User
2
3
51
PICTURE CONTROL
ADAPTIVE PICTURE MODE (APM)
INPUT
MODE
TV
POWER
D/A
INPUT
VCR
BRIGHT
Press the A P M button once. The screen is divided to 4
sections.
1
DVD
RATIO TEXT
GUIDE
SUBTITLE
INFO
MENU
!
Allows you to select your preferred picture mode after comparing the four different picture (Dynamic, Standard, Mild, and
User1 (or User2) settings.
SIMPLINK
LIST
FAV
EXIT
OK
Use the D or E or F or G buttons to navigate between
the 4 screen sections.
By pressing the O K button, you can select the desired
mode.
2
PICTURE CONTROL
Q.VIEW
PR
VOL
PAGE
MUTE
! NOTE
G
G
While in the APM mode, only the POWER, A P M, O K, E X I T, D
or E or F or G, VOLUME + or -, M U T E buttons on the
remote control are usable.
APM screen will automatically disappear after approx. 40
seconds unless a button is pressed.
1
2
3
4
5
6
7
8
9
APM
0
SLEEP
SIZE
INDEX
TIME
?
I/II
REVEAL
Dynamic
Standard
Mild
User1
F
D
G
E
Navigate
Select
EXIT
Exit
1
52
2
MANUAL PICTURE ADJUSTMENT
INPUT
D/A
POWER
MODE
TV
POWER
INPUT
VCR
PSM - USER OPTION
BRIGHT
DVD
SIMPLINK
INFO
!
RATIO TEXT
GUIDE
You can adjust picture Contrast, Brightness,Colour,
Sharpness, and Tint options to the levels you prefer.
SUBTITLE
MENU
LIST
FAV
EXIT
OK
PSM
Colour temperature
XD
Advanced
Video preset
2
Press the G button and then use D or E button to
select P S M.
1
3
Press the G button and then use D or E button to
select User 1 or User 2.
PSM
Dynamic
Colour temperature
Standard
XD
Mild
Advanced
User 1
Video preset
4
G
user 2
Press the G button and then use D or E button to
select the desired picture option (Contrast,
Brightness, Colour, Sharpness, or T i n t).
2
5
6
PICTURE CONTROL
1
Press the M E N U button and then use D or E button
to select the PICTURE menu.
Press the G button and then use F or G button to
make appropriate adjustme
Download PDF

advertising