LG | 32LK510B | LG 32LK510BPTA Owner’s Manual

*MFL70400502*
(1803-REV01)
www.lg.com
LK51*, LK52*, LK53*
LK51*
LK52*
LK53*
LK55*
1
2-A
32LK51*, 32LK52*, 43LK53*
2-B
3
32LK53*
a
AAA
A
AAA
B
a
X2
(M4 X L16)
b X5
(M3 X L10)
LK55*
4
5-A
5-B
32LK51*, 32K52*
DC-IN
(19 V
32/43LK53*
)
3
1
2
2
1
LK55*
1
2
3
4
a
électrique.
A
B
5
6
‫ﻣﻮﺍﺭﺩ ﺍﻳﻤﻨﯽ ﻭ ﻣﺮﺟﻊ‬
7
b
Tiếng Việt
Đọc phần An toàn và Tham khảo.
1
2
Để biết thông tin về nguồn điện và mức tiêu thụ điện, hãy tham khảo nhãn dán trên sản phẩm.
: Depending on model /
/ Selon le modèle / Dependendo do modelo /
/
/
/ Tùy theo kiểu sản phẩm
ANTENNA /
CABLE IN
RADIO
ANTENNA IN
Satellite IN
HDMI IN
USB IN
AUDIO
A
VIDEO
0
1
E
2
VIDEO/Y
PB
PR
L/MONO AUDIO R
COMPONENT IN
D
B
VIDEO L/MONO AUDIO R
G
F
A
B
VIDEO/Y
OPTICAL DIGITAL
AUDIO OUT
D
E
32LK526BPTA
472
/
168
/
(kg)
441
84
/
472
/
168
/
/
441
4.90
19 V
2.0
/
739
F G
F
(mm)
32LK510BPTA
739
32LK510BPVD
32LK510BYVD
Power requirement /
/
/
Power requirement /
/
H/P OUT
C
C
PB
PR
L/MONO AUDIO R
AV IN
84
/
2.0 A
19
5.10
19 V
2.2
/
4.85
5.05
2.2 A
19
32LK536BPTB
742
472
180
445
86.5
5.55
43LK5360PTA
975
612
188
571
85.2
8.2
8.1
32LK558BPTF
739
472
168
461
92.6
5.90
5.85
Power requirement /
/
/
/
/
/
/
5.50
OWNER’S MANUAL
Safety and Reference
LED TV*
*D
isclaimer
LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain
it for future reference.
*MFL70343102*
(1803-REV01)
www.lg.com
Copyright © 2018 LG Electronics Inc. All Rights Reserved.
India region only. (Below sentence is not applicable for above 1920 X 1080 resolution TV models.)
ATTENTION:
ENGLISH
This product is qualified for the BEE Star rating in the ‘Home’ Mode.
The Objectives of Star Labeling Program is designed to promote energy efficient products and practices.
When the television is initially set up, it is designed to meet the BEE Star Labeling requirements while maintaining optimum picture quality.
• Changes to certain functionalities of this television (TV Guide, Picture/sound etc) may change the power consumption.
• Depending upon such changed setting (eg., Retail mode), the power consumption may vary which possibly could exceed the stated
energy consumption.
To reset the television to Star rating qualified settings, select ‘Home’ mode from the initial set-up procedure in ‘factory settings’ under the
‘Set-up’ menu.
2
Warning! Safety
instructions
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk
of electric shock to persons.
This symbol is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING : TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
•• TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS
WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
•• Do not place the TV and/or remote control in the following
environments:
-- Keep the product away from direct sunlight.
-- An area with high humidity such as a bathroom
-- Near any heat source such as stoves and other devices that
produce heat.
-- Near kitchen counters or humidifiers where they can easily be
exposed to steam or oil.
-- An area exposed to rain or wind.
-- Do not expose to dripping or splashing and do not place objects
filled with liquids, such as vases, cups, etc. on or over the
apparatus (e.g., on shelves above the unit).
-- Near flammable objects such as gasoline or candles, or expose
the TV to direct air conditioning.
-- Do not install in excessively dusty places.
Otherwise, this may result in fire, electric shock, combustion/
explosion, malfunction or product deformation.
ENGLISH
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
•• Ventilation
-- Install your TV where there is proper ventilation. Do not install in
a confined space such as a bookcase.
-- Do not install the product on a carpet or cushion.
-- Do not block or cover the product with cloth or other materials
while unit is plugged in.
•• Take care not to touch the ventilation openings. When watching
the TV for a long period, the ventilation openings may become hot.
•• Protect the power cord from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a door, or walked upon.
Pay particular attention to plugs, wall outlets, and the point where
the cord exits the device.
•• Do not move the TV whilst the Power cord is plugged in.
•• Do not use a damaged or loosely fitting power cord.
•• Be sure do grasp the plug when unplugging the power cord. Do not
pull on the power cord to unplug the TV.
•• Do not connect too many devices to the same AC power outlet as
this could result in fire or electric shock.
•• Disconnecting the Device from the Main Power
-- The power plug is the disconnecting device. In case of an
emergency, the power plug must remain readily accessible.
•• Do not let your children climb or cling onto the TV. Otherwise, the
TV may fall over, which may cause serious injury.
•• Outdoor Antenna Grounding (Can differ by country):
-- If an outdoor antenna is installed, follow the precautions below.
An outdoor antenna system should not be located in the vicinity
of overhead power lines or other electric light or power circuits,
or where it can come in contact with such power lines or circuits
as death or serious injury can occur.
Be sure the antenna system is grounded to provide some
protection against voltage surges and built-up static charges.
Section 810 of the National Electrical Code (NEC) in the U.S.A.
provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes and requirements for the grounding electrode.
Antenna grounding according to the National Electrical Code,
ANSI/NFPA 70
3
ENGLISH
•• Grounding (Except for devices which are not grounded.)
-- TV with a three-prong grounded AC plug must be connected to
a three-prong grounded AC outlet. Ensure that you connect the
earth ground wire to prevent possible electric shock.
•• Never touch this apparatus or antenna during a lightning storm.
You may be electrocuted.
•• Make sure the power cord is connected securely to the TV and wall
socket if not secured damage to the Plug and socket may occur and
in extreme cases a fire may break out.
•• Do not insert metallic or inflammable objects into the product. If a
foreign object is dropped into the product, unplug the power cord
and contact the customer service.
•• Do not touch the end of the power cord while it is plugged in. You
may be electrocuted.
•• If any of the following occur, unplug the product
immediately and contact your local customer service.
-- The product has been damaged.
-- If water or another substance enters the product (like an AC
adapter, power cord, or TV).
-- If you smell smoke or other odors coming from the TV
-- When lightning storms or when unused for long periods of time.
Even the TV is turned off by remote control or button, AC power
source is connected to the unit if not unplugged in.
•• Do not use high voltage electrical equipment near the TV (e.g., a
bug zapper). This may result in product malfunction.
•• Do not attempt to modify this product in any way without written
authorization from LG Electronics. Accidental fire or electric shock
can occur. Contact your local customer service for service or repair.
Unauthorized modification could void the user’s authority to
operate this product.
•• Use only an authorized attachments / accessories approved by
LG Electronics. Otherwise, this may result in fire, electric shock,
malfunction, or product damage.
•• Never disassemble the AC adapter or power cord. This may result in
fire or electric shock.
4
•• Handle the adapter carefully to avoid dropping or striking it. An
impact could damage the adapter.
•• To reduce the risk of fire or electrical shock, do not touch the TV
with wet hands. If the power cord prongs are wet or covered with
dust, dry the power plug completely or wipe dust off.
•• Batteries
-- Store the accessories (battery, etc.) in a safe location out of the
reach of children.
-- Do not short circuit, disassemble, or allow the batteries to
overheat. Do not dispose of batteries in a fire. Batteries should
not be exposed to excessive heat.
•• Moving
-- When moving, make sure the product is turned off, unplugged,
and all cables have been removed. It may take 2 or more people
to carry larger TVs. Do not press or put stress on the front panel
of the TV. Otherwise, this may result in product damage, fire
hazard or injury.
•• Keep the packing anti-moisture material or vinyl packing out of the
reach of children.
•• Do not allow an impact shock, any objects to fall into the product,
and do not drop anything onto the screen.
•• Do not press strongly upon the panel with a hand or a sharp
object such as a nail, pencil, or pen, or make a scratch on it. It may
cause damage to screen.
•• Cleaning
-- When cleaning, unplug the power cord and wipe gently with a
soft/dry cloth. Do not spray water or other liquids directly on the
TV. Do not clean your TV with chemicals including glass cleaner,
any type of air freshener, insecticide, lubricants, wax (car,
industrial), abrasive, thinner, benzene, alcohol etc., which can
damage the product and/or its panel. Otherwise, this may result
in electric shock or product damage.
Preparing
Separate Purchase
B
B
A
A
* A <
= 10 mm
* B <
= 18 mm
•• Use a certified cable with the HDMI logo attached.
•• If you do not use a certified HDMI cable, the screen may not display
or a connection error may occur. (Recommended HDMI Cable Types)
-- High-Speed HDMI®/TM Cable (3 m or less)
-- High-Speed HDMI®/TM Cable with Ethernet (3 m or less)
•• How to use the ferrite core (Depending on model)
-- Use the ferrite core to reduce the electromagnetic interference in
the power cord. Wind the power cord on the ferrite core once.
Separate purchase items can be changed or modified for quality
improvement without any notification. Contact your dealer to buy these
items. These devices only work with certain models.
The model name or design may be changed depending on the upgrade
of product functions, manufacturer’s circumstances or policies.
(Depending on model)
ENGLISH
•• If the TV is turned on for the first time after it was shipped from the
factory, initialization of the TV may take a few minutes.
•• Image shown may differ from your TV.
•• Your TV’s OSD (On Screen Display) may differ slightly from that
shown in this manual.
•• The available menus and options may differ from the input source
or product model that you are using.
•• New features may be added to this TV in the future.
•• The device must be easily accessed to a location outlet near the
access. Some devices are not made by turning on / off button,
turning off the device and unplugging the power cord.
•• The items supplied with your product may vary depending on the
model.
•• Product specifications or contents of this manual may be changed
without prior notice due to upgrade of product functions.
•• For an optimal connection, HDMI cables and USB devices should
have bezels less than 10 mm thick and 18 mm width. Use an
extension cable that supports
if the USB cable or USB
memory stick does not fit into your TV’s USB port.
Wall Mounting Bracket
Make sure to use screws and wall mount bracket that meet the VESA
standard. Standard dimensions for the wall mount kits are described in
the following table.
A
B
Model
VESA (A x B) (mm)
Standard screw
Number of screws
Wall mount bracket
32/43LK51*
32/43LK52*
32/43LK53*
32/43LK55*
200 x 200
M6
4
LSW240B
MSW240
49LK51*
49LK52*
300 x 300
M6
4
OLW480B
MSW240
[TV side]
[Wall side]
10 cm (+ / -2 cm)
5
Lifting and moving the TV
Please note the following advice to prevent the TV from being scratched
or damaged and for safe transportation regardless of its type and size.
ENGLISH
•• It is recommended to move the TV in the box or packing material
that the TV originally came in.
•• Before moving or lifting the TV, disconnect the power cord and all
cables.
•• When holding the TV, the screen should face away from you to
avoid damage.
•• Avoid touching the screen at all times, as this may result in
damage to the screen.
•• Do not move the TV by holding the cable holders, as the
cable holders may break, and injuries and damage to the
TV may occur.
•• When attaching the stand to the TV set, place the screen
facing down on a cushioned table or flat surface to protect
the screen from scratches.
Mounting on the Table
1 Lift and tilt the TV into its upright position on a table.
• Leave a 10 cm (minimum) space from the wall for proper
ventilation.
•• Hold the top and bottom of the TV frame firmly. Make sure not to
hold the transparent part, speaker, or speaker grill area.
10 cm
10 cm
10 cm
10 cm
10 cm
•• When transporting a large TV, there should be at least 2 people.
•• When transporting the TV by hand, hold the TV as shown in the
following illustration.
•• When transporting the TV, do not expose the TV to jolts or excessive
vibration.
•• When transporting the TV, keep the TV upright, never turn the TV
on its side or tilt towards the left or right.
•• Do not apply excessive pressure to cause flexing / bending of frame
chassis as it may damage screen.
•• When handling the TV, be careful not to damage the protruding
buttons.
6
(Depending on model)
2 Connect the power cord to a wall outlet.
Securing TV to the Wall
ENGLISH
•• Do not apply foreign substances (oils, lubricants, etc.) to
the screw parts when assembling the product. (Doing so
may damage the product.)
•• If you install the TV on a stand, you need to take actions
to prevent the product from overturning. Otherwise, the
product may fall over, which may cause injury.
•• Do not use any unapproved items to ensure the safety and
product life span.
•• Any damage or injuries caused by using unapproved items
are not covered by the manufacturer’s warranty.
•• Make sure that the screws are inserted correctly and
fastened securely. (If they are not fastened securely
enough, the TV may tilt forward after being installed.)
Do not use too much force and over tighten the screws;
otherwise screw may be damaged and not tighten
correctly.
•• If a television is not positioned in a sufficiently stable
location, it can be potentially hazardous due to falling.
Many injuries, particularly to children, can be avoided by
taking simple precautions such as:
-- Using cabinets or stands recommended by the
manufacturer of the television.
-- Only using furniture that can safely support the
television.
-- Ensuring the television is not overhanging the edge of
the supporting furniture.
-- Not placing the television on tall furniture (for
example, cupboards or bookcases) without anchoring
both the furniture and the television to a suitable
support.
-- Not standing the televisions on cloth or other
materials placed between the television and
supporting furniture.
-- Educating children about the dangers of climbing on
furniture to reach the television or its controls.
(Depending on model)
1 Insert and tighten the eye-bolts, or TV brackets and bolts on the
back of the TV.
• If there are bolts inserted at the eye-bolts position, remove the
bolts first.
2 Mount the wall brackets with the bolts to the wall. Match the
location of the wall bracket and the eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.
Make sure to keep the rope horizontal with the flat surface.
•• Use a platform or cabinet that is strong and large enough to
support the TV securely.
•• Brackets, bolts and ropes are not provided. You can obtain
additional accessories from your local dealer.
7
Mounting to the Wall
ENGLISH
Attach an optional wall mount bracket at the rear of the TV carefully
and install the wall mount bracket on a solid wall perpendicular to
the floor. When you attach the TV to other building materials, please
contact qualified personnel. LG recommends that wall mounting be
performed by a qualified professional installer. We recommend the use
of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with
cables connected. When you do not use LG’s wall mount bracket, please
use a wall mount bracket where the device is adequately secured to the
wall with enough space to allow connectivity to external devices. It is
advised to connect all the cables before installing fixed wall mounts.
10 cm
10 cm
•• When installing the wall mounting bracket, it is recommended to
cover the stand hole using tape, in order to prevent the influx of
dust and insects. (Depending on model)
Stand hole
m
10 c
10 cm
10 cm
(Depending on model)
•• Remove the stand before installing the TV on a wall mount
by performing the stand attachment in reverse.
•• For more information of screws and wall mount bracket,
refer to the Separate Purchase.
•• If you intend to mount the product to a wall, attach VESA
standard mounting interface (optional parts) to the back
of the product. When you install the set to use the wall
mounting bracket (optional parts), fix it carefully so as
not to drop.
•• When mounting a TV on the wall, make sure not to install
the TV by hanging the power and signal cables on the back
of the TV.
•• Do not install this product on a wall if it could be exposed
to oil or oil mist. This may damage the product and cause
it to fall.
Connections
Connect various external devices to the TV and switch input modes to
select an external device. For more information of external device’s
connection, refer to the manual provided with each device.
Antenna/Cable
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
•• Use a signal splitter to use more than 2 TVs.
•• If the image quality is poor, install a signal amplifier properly to
improve the image quality.
•• If the image quality is poor with an antenna connected, try to
realign the antenna in the correct direction.
•• An antenna cable and converter are not supplied.
Satellite dish
Connect the TV to a satellite dish to a satellite socket with a satellite RF
cable (75 Ω). (Depending on model)
8
Other connections
Listening to the Radio
Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.
(Only LK526*)
•• Supported HDMI Audio format (Depending on model) :
DTS (44.1 kHz, 48 kHz),
Dolby Digital / Dolby Digital Plus (32 kHz, 44.1 kHz, 48 kHz),
PCM (32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz)
ENGLISH
HDMI
(Only LK526*)
Connect the terrestrial antenna to RADIO ANTENNA IN to listen to
crisp radio without having to install a separate antenna.
Connect an FM antenna cable to the radio antenna port.
•• When connecting the FM antenna cable, straighten the
cable completely and set it in a position that delivers good
reception.
External Devices
Available external devices are: Blu-ray player, HD receivers, DVD players,
VCRs, audio systems, USB storage devices, PC, gaming devices, and
other external devices.
•• The external device connection may differ from the model.
•• Connect external devices to the TV regardless of the order of the
TV port.
•• If you record a TV program on a Blu-ray/DVD recorder or VCR, make
sure to connect the TV signal input cable to the TV through a DVD
recorder or VCR. For more information of recording, refer to the
manual provided with the connected device.
•• Refer to the external equipment’s manual for operating
instructions.
•• If you connect a gaming device to the TV, use the cable supplied
with the gaming device.
•• In PC mode, there may be noise associated with the resolution,
vertical pattern, contrast or brightness. If noise is present, change
the PC output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the PICTURE
menu until the picture is clear.
•• In PC mode, some resolution settings may not work properly
depending on the graphics card.
•• Improving radio broadcast reception: If the reception
(Forced Mono)
is poor in stereo mode, press the
button on your remote control. This may improve the radio
reception.
1 Press (HOME) and select FM Radio.
2 Listen to the radio by using the following menus/buttons.
1
2
4
3
5
Adapter
(Depending on model)
•• Please be sure to connect the TV to the AC-DC power
adapter before connecting the TV’s power plug to a wall
power outlet.
No.
Description
1
Current time.
2
Current preset number.
3
Audio mode. (Stereo, Mono, Forced Mono)
4
Current radio frequency.
5
Available buttons on the remote control.
9
Remote RS-232C setup
Using Button
To obtain the RS-232C external control setup information, please visit
www.lg.com. Download and read the manual. (Depending on model)
You can simply operate the TV functions, using the button. (Depending
on model)
ENGLISH
•• Do not drop the product or let it fall over when connecting
external devices. Otherwise, this may result in injury or
damage to the product.
•• When connecting external devices such as video game
consoles, make sure the connecting cables are long
enough. Otherwise, the product may fall over, which may
cause injury or damage the product.
Basic functions
Power On (Press)
Power Off (Press and Hold)
Menu Control (Press1)
Menu Selection (Press and Hold2)
1 You can access and adjust the menu by pressing the button when
TV is on.
2 You can use the function when you access menu control.
Adjusting the menu
When the TV is turned on, press the
the Menu items using the button.
button one time. You can adjust
Turns the power off.
Changes the input source.
Scrolls through the saved programmes.
Adjusts the volume level.
10
Using Remote Control
•• In Analogue TV and some countries, some remote control
buttons may not work.
Make sure to point the remote control toward the remote control sensor
on the TV.
ENGLISH
The descriptions in this manual are based on the buttons on the remote
control. Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries
(1.5 V AAA) matching the and ends to the label inside the
compartment, and close the battery cover. To remove the batteries,
perform the installation actions in reverse.
(POWER) Turns the TV on or off.
Selects Radio, TV and DTV programme.
Recalls your preferred subtitle in digital mode.
Audio descriptions function will be enabled. (Depending on
model)
Resizes an image.
(INPUT) Changes the input source.
Number buttons Enters numbers.
-- Pressing and holding the button accesses the Quick Access
menu.
Accesses the saved programmes list.
Returns to the previously viewed programme.
Adjusts the volume level.
Accesses your favourite programme list.
Shows programme guide.
(MUTE) Mutes all sounds.
-- Pressing and holding the button accesses the Accessibility
menu.
Scrolls through the saved programmes.
Moves to the previous or next screen.
Teletext buttons (
) These buttons are used for
teletext.
(HOME) Accesses the Home menu.
(Settings) Accesses the Settings menu.
Accesses the Quick menus.
Navigation buttons (up/down/left/right) Scrolls through menus
or options.
Selects menus or options and confirms your input.
Returns to the previous level.
Clears on-screen displays and returns to TV viewing.
Views the information of the current programme and screen.
Starts to record and displays record menu. (Only Time
MachineReady supported model) (Depending on model)
Control buttons (
) Controls media contents.
,
,
,
These access special functions in some
menus.
(Some buttons and services may not be provided depending on models
or regions.)
11
ENGLISH
Game remote functions
Settings
(Depending on model)
Game Hot Key works only in normal TV viewing mode. (Not in USB
Playback)
Automatically Setting Up Programme
1
2
(POWER) Turns TV on or off.
(HOME) Accesses the Home menu.
(Game) Opens Game menu.
(Input list) Changes the input source.
(Back) Returns to the previous level.
Clears on-screen displays and returns to TV viewing.
Adjusts the volume level.
Scrolls through the saved programmes.
1 Navigation buttons (up/down/left/right) Scrolls through
menus or options.
2 OK Game selection / Game play
•• Do not mix new batteries with old batteries. This may
cause the batteries to overheat and leak.
•• Failure to match the correct polarities of the battery may
cause the battery to burst or leak, resulting in fire, personal
injury, or ambient pollution.
•• This apparatus uses batteries. In your community there
might be regulations that require you to dispose of these
batteries properly due to environmental considerations.
Please contact your local authorities for disposal or
recycling information.
•• Batteries inside or inside the product shall not be exposed
to excessive heat such as sunshine, fire or the like.
12
(Settings) → Programmes → Auto Tuning
Automatically tunes the programmes.
•• If Input Source is not connected properly, programme registration
may not work.
•• Auto Tuning only finds programmes that are currently
broadcasting.
•• If Lock System is turned on, a pop-up window will appear asking
for password.
To select Picture Mode
(Settings) → Picture → Picture Mode Settings → Picture
Mode
Select the picture mode optimized for the viewing environment or the
programme.
•• Vivid: Heightens contrast, brightness and sharpness to display
vivid images.
•• Standard: Displays images in standard levels of contrast,
brightness and sharpness.
•• Eco / : [Depending on model]
The Energy Saver feature changes settings on the TV to reduce
power consumption.
•• Cinema / Game: Displays the optimum picture for movie, game.
•• Soccer / Cricket: [Depending on model]
Optimizes the video image for high and dynamic actions by
emphasizing primary colours such as white, grass, or sky blue.
••
Expert1 / Expert2: Menu for adjusting picture quality that
allows experts and amateurs to enjoy the best TV viewing. This
is the adjustment menu provided for ISF-certified picture tuning
professionals. (ISF logo can only be used on ISF-certified TVs.)
ISFccc: Imaging Science Foundation Certified Calibration Control
•• Depending on input signal, available range of picture modes may
differ.
••
Expert mode is for picture tuning professionals to control
and fine-tune using a specific image. For normal images, the
effects may not be dramatic.
•• The ISF function is only available on some models.
•• Changing Picture Mode may modify Energy Saving
and Motion Eye Care settings, which can also affect energy
consumption.
To set additional picture options
(Settings) → Picture → Picture Mode Settings
This feature allows you to adjust the selected picture mode in detail.
(Settings) → Picture → Picture Mode Settings → Picture
Options
Adjusts detailed setting for images.
•• Backlight: Controls the level of screen brightness by adjusting the
backlight. The closer to 100, the brighter the screen.
•• Contrast: Adjusts the contrast of the bright and dark areas of the
picture. The closer to 100, the higher the contrast.
•• Brightness: Adjusts the overall screen brightness. The closer to
100, the brighter the screen.
•• Sharpness: Adjusts the sharpness of the image. The closer to 50,
the sharper and clearer the image.
•• Colour: Tones down or up the colours displayed on the screen. The
closer to 100, the deeper the colour.
•• Tint: Adjusts the colour balance between red and green displayed
on the screen. The closer to Red 50, the more red the colour will be.
The closer to Green 50, the more green the colour will be.
•• Colour Temperature: Adjusts the colour temperature from cold
to warm.
•• Depending on input signal or other picture settings, the range of
detailed items for adjustment may differ.
To set advanced controls
(Settings) → Picture → Picture Mode Settings → Advanced
Controls / Expert Controls
Calibrates the screen for each picture mode; or adjusts picture settings
for a special screen.
•• Dynamic Contrast: Adjusts the contrast to the optimal level
according to the brightness of the image.
•• Dynamic Colour: Adjusts colours to make the image appear in
more natural colours.
•• Preferred Colour: Adjust the colours of skin, grass and sky to your
personal preferences.
•• Gamma: Sets the gradation curve according to the output of
picture signal in relation to the input signal.
•• Colour Gamut: Selects the range of colours that can be expressed.
•• Colour Filter: Filters a specific colour spectrum in RGB colours to
fine-tune colour saturation and hue accurately.
•• White Balance: Adjusts the overall tone of the screen as desired.
•• Colour Management System: This is a system that experts use
when they adjust colour with a test pattern. They can select from
six colour areas (Red / Green / Blue / Cyan / Magenta / Yellow)
without affecting other colours. For normal images, adjustments
may not result in noticeable colour changes.
•• Depending on input signal or other picture settings, the range of
detailed items for adjustment may differ.
ENGLISH
Fine-tuning Picture Mode
•• Noise Reduction: Eliminates noise in the picture.
•• MPEG Noise Reduction: Eliminates noise generated while
creating digital picture signals.
•• Black Level: Adjusts the brightness and contrast of the screen
to suit the black level of the input picture by using the blackness
(black level) of the screen.
•• Real Cinema: Optimizes the screen for movie viewing.
•• Motion Eye Care: Automatically adjusts brightness and reduces
image blur based on image data to reduce eyestrain.
•• Depending on input signal or other picture settings, the range of
detailed items for adjustment may differ.
Resetting picture settings
(Settings) → Picture → Picture Mode Settings → Picture
Reset
Resets picture settings that the user customizes. Each picture mode is
reset. Select the picture mode you wish to reset.
To use Energy Saving feature
(Settings) → Picture →
Energy Saving
Reduces power consumption by adjusting screen brightness.
•• Auto: [Depending on model]
The TV sensor detects the ambient lighting and automatically
adjusts the screen brightness.
•• Off: Turns off the Energy Saving mode.
•• Minimum / Medium / Maximum: Applies the pre-set
Energy Saving mode.
•• Screen Off: Screen is turned off and only sound is played. Press
any button except Power button on the remote control to turn the
screen back on.
•• Depending on the Energy Saving (Auto / Maximum), you
may not be able to adjust the Backlight.
In this case, navigate to (Settings) → Picture →
Energy
Saving and set to Off or Minimum.
13
ENGLISH
To use Eye Comfort Mode feature
Using the Sound Effect function
(Settings) → Picture → Additional Settings → Eye Comfort
Mode
If you turn this option on, colour temperature will be automatically
adjusted to reduce eye strain.
(Settings) → Sound → Sound Mode Settings
The user can select various sound effects.
•• On: Automatically adjusts the screen colour temperature.
•• Off: Turns off the Eye Comfort Mode.
Capturing the TV screen
(Depending on model)
You can capture your TV screen.
1 Connect the USB device to the USB port on the side or back of the TV.
2 During watch the live broadcast, press the
button. (Only DTV)
3 Press the SCREEN CAPTURE button left corner of the screen. (or
press the
(Red) button on the Remote Control.)
4 Screen-captured image will be saved in connected USB device.
•• Applies to digital broadcasting.
•• You can view screen-captured images in the My Media → ’Screen
Capture’ Folder.
•• The captured image is saved in the same size as the original image.
Selecting Sound Mode
(Settings) → Sound → Sound Mode Settings → Sound
Mode
Adjusts TV audio to an optimal level based on a selected sound mode.
•• Standard: Optimizes the sound for all types of content.
•• Clear Voice: Boosts voice clarity from the TV.
•• Music / Bollywood: [Depending on model] Optimizes the sound
for music.
•• Cinema: Optimizes the sound for cinemas.
•• Soccer / Cricket: [Depending on model] Optimizes the sound for
sports.
•• Game: Optimizes the sound for gameplay.
Adjusting audio balance
(Settings) → Sound → Sound Mode Settings → Balance
Adjust the volume of the left and right speakers.
14
•• Virtual Surround: Enjoy an immersive soundscape with the
virtual multi-channel surround sound effect.
•• Equalizer: Set the desired sound by adjusting the equalizer
directly.
•• Reset: Reset the sound effect settings.
•• This is only available if Sound Mode is set to Standard.
To use TV Speaker
(Settings) → Sound → Sound Out → Internal TV Speaker
[Depending on model]
Sound is output through the TV speaker.
To use External Speaker
(Settings) → Sound → Sound Out → Audio Out (Optical)
[Depending on model]
Sound is output through the speaker connected to the optical port.
•• SimpLink is supported.
To use Internal TV Speaker + Audio Out
(Optical)
(Settings) → Sound → Sound Out → Internal TV Speaker +
Audio Out (Optical)
[Depending on model]
Audio is played through the TV’s built-in speakers and the audio device
connected to the digital optical audio output port simultaneously.
To connect and use LG audio device
(Settings) → Sound → Sound Out → LG Sound Sync
(Optical)
[Depending on model]
Connect LG audio device with the
logo to the optical digital audio
output port. LG audio device allows you to enjoy rich powerful sound
easily.
To use Digital Sound Out
Item
Auto
PCM
Audio Input
Digital Audio Output
MPEG
Dolby Digital
Dolby Digital Plus
HE-AAC
All
PCM
Dolby Digital
Dolby Digital
Dolby Digital
PCM
•• Supported DTV Audio: MPEG, Dolby Digital, Dolby Digital Plus,
HE-AAC
To use Headphone
(Settings) → Sound → Sound Out → Wired Headphones
[Depending on model]
Sound is output through the headphone connected to the earphone/
headphone port.
To synchronize audio and video
(Settings) → Sound → AV Sync Adjustment
[Depending on model]
Synchronizes video and audio directly when they do not match. If you
set AV Sync Adjustment to on, you can adjust the sound output (TV
speakers or External Speaker) to the screen image.
•• If you select the Bypass, Outputs the broadcast signals or the
sound from external devices without any audio delay. The audio
may be output before the video because of the time the TV takes to
process the video input.
Using Music Catch
(Depending on model)
It is a function you can use to record the music from the TV any time.
1 Connect the USB device to the USB port on the side or back of the TV.
2 During watch the Live broadcast, press the
button.
3 Press the START MUSIC RECORDING button right corner of the
screen.
4 If you want to stop the music recording, press the STOP MUSIC
RECORDING button.
ENGLISH
(Settings) → Sound → Sound Out → Internal TV Speaker +
Audio Out (Optical) → Digital Sound Out
[Depending on model]
Sets up Digital Sound Out.
•• If there is not enough remaining space in the USB device, Music
Catch may not work properly. To use Music Catch function, you need
the USB device which has at least 100 MB.
•• Stored files can be viewed in the My Media → ’Music Catch’
Folder, and you can open them on your PC or portable devices.
•• Recorded files are stored in .wav format.
•• If you switch apps or input during recording, recording
automatically ends and the recorded files will be saved.
•• With the Music Catch function, you can play a music for up to two
hours.
•• If the USB device is removed by force while music recording, the
music recording will not complete properly.
To use SIMPLINK
[Depending on model]
SIMPLINK is a feature that enables you to control and manage various
multimedia devices conveniently via the SIMPLINK menu.
1 Connect the TV’s HDMI IN terminal and the SIMPLINK device’s HDMI
output terminal using an HDMI cable.
•• [Depending on model]
For home theatre units with a SIMPLINK function, connect HDMI
terminals as above, and use an optical cable to connect Optical
Digital Audio Out from the TV to Optical Digital Audio In of the
SIMPLINK device.
2 Select (Settings) → General → SIMPLINK.
SIMPLINK menu window appears.
3 In SIMPLINK Setting window, set SIMPLINK function to On.
4 Configure the Auto Power Sync settings to on or off.
•• You can also set the SIMPLINK in (HOME) → Inputs →
SIMPLINK. In SIMPLINK menu window, selects the device you
want to control.
•• This function is only compatible with devices with the SIMPLINK
logo.
•• To use the SIMPLINK function, you need to use a high-speed HDMI®
cable (with CEC (Consumer Electronics Control) feature added).
High-speed HDMI® cables have the No. 13 pin connected for
information exchange between devices.
•• If you switch to another input, the SIMPLINK device will stop.
•• If a third-party device with the HDMI-CEC function is also used, the
SIMPLINK device may not work normally.
•• [Depending on model]
If you select or play media from the device with a home theatre
function, the HT Speaker (Speaker) is automatically connected.
Be sure to connect with an optical cable (sold separately) to use the
HT Speaker (Speaker) function.
15
SIMPLINK function description
ENGLISH
•• Direct Play: Plays the multimedia device on the TV instantly.
•• Controlling devices with the TV remote control: Manages the
multimedia device with the TV remote control.
•• Main Power Off: If Auto Power Sync is set to on in the SIMPLINK
settings and turn off your TV, the devices connected to your TV via
SIMPLINK will also be turned off.
•• Main Power On: If Auto Power Sync is set to on in the SIMPLINK
settings, turning on a SIMPLINK-linked device will turn the TV on.
(Behavior may vary depending on connected device.)
•• Speaker: [Depending on model]
Select speaker either on the home theatre unit or the TV.
To set password
(Settings) → Safety → Set Password
Sets or changes the TV password.
•• The initial password is set to ‘0000’.
To return Reset to Initial Settings
(Settings) → General → Reset to Initial Settings
All stored information is deleted and TV settings are reset.
The TV turns itself off and back on, and all settings are reset.
•• When Lock System is in place, a pop-up window appears and asks
for password.
•• Do not turn off the power during initialization.
16
To remove the USB device
Select the connected USB HDD from (HOME) → Inputs and select
the Eject button to disconnect the USB HDD storage device.
When you see a message that the USB device has been removed,
separate the device from the TV.
•• Once a USB device has been selected for removal, it can no longer
be read. Remove the USB storage device and then re-connect it.
Using a USB storage device - warning
•• If the USB storage device has a built-in auto recognition
programme or uses its own driver, it may not work.
•• Some USB storage devices may not work or may work incorrectly.
•• Use only USB storage devices formatted with the Windows FAT32
or NTFS File System.
•• For external USB HDDs, it is recommended that you use devices
with a rated voltage of less than 5 V and a rated current of less
than 500 mA.
•• It is recommended that you use USB memory sticks of 32 GB or less
and USB HDDs of 2 TB or less.
•• If a USB HDD with power-saving function does not work properly,
turn the power off and on. For more information, refer to the user
manual of the USB HDD.
•• Data in the USB storage device can be damaged, so be sure to back
up important files to other devices. Data maintenance is the user’s
responsibility and the manufacturer is not responsible for data loss.
My Media supporting file
Supported Video Formats
•• Maximum: 1,920 x 1,080 @ 30p (Only Motion JPEG 640 x 480 @
30p)
Extension
Video
.asf, .wmv
Audio
Video
.avi
Audio
Video
.ts, .trp, .tp,
.mts, .m2ts
Audio
Video
.vob
.mp4, .m4v,
.mov
.mkv
motion JPEG
.mpg, .mpeg,
.mpe
.dat
.flv
.3gp
.rm2, .rmvb2
Audio
Video
Audio
Video
Audio
Video
Audio
Video
Audio
Video
Audio
Video
Audio
Video
Audio
Video
Audio
Codec
MPEG-4 Part2, Xvid, H.264/AVC,
VC1(WMV3, WVC1)
WMA Standard, WMA9(Pro), MP3, AAC,
AC3
MPEG-2, MPEG-4 Part2, Xvid, H.264/AVC
HE-AAC, LPCM, ADPCM, MPEG-1 Layer I,
MPEG-1 Layer II, Dolby Digital, MPEG-1
Layer III (MP3), DTS1
H.264/AVC, MPEG-2, H.265/HEVC
MPEG-1 Layer I, MPEG-1 Layer II, MPEG-1
Layer III (MP3), Dolby Digital, Dolby Digital
Plus, AAC, HE-AAC, DTS1
MPEG-1, MPEG-2
Dolby Digital, MPEG-1 Layer I, MPEG-1
Layer II, DVD-LPCM
MPEG-2, MPEG-4 Part2, Xvid, H.264/AVC
AAC, MPEG-1 Layer III (MP3), DTS1
MPEG-2, MPEG-4 Part2, Xvid, H.264/AVC
HE-AAC, Dolby Digital, MPEG-1 Layer III
(MP3), LPCM, DTS1
MJPEG
LPCM, ADPCM
MPEG-1, MPEG-2
MPEG-1 Layer I, MPEG-1 Layer II, Dolby
Digital, LPCM
MPEG-1, MPEG-2
MP2
Sorenson H.263, H.264/AVC
MP3, AAC, HE-AAC
H.264/AVC, MPEG-4 Part2
AAC, AMR(NB/WB)
RV30, RV40
AAC, HE-AAC, RA6(Cook)
Supported Audio Formats
File Format
MP3
AAC
M4A
WAV
WMA
WMA 10 Pro
OGG
Item
Bit rate
Sample freq.
Support
Bit rate
Sample freq.
Support
Bit rate
Sample freq.
Support
Bit rate
Sample freq.
Support
Bit depth
Bit rate
Sample freq.
Support
Bit rate
Channel /
Sample freq.
Support
Bit rate
Sample freq.
Support
Info
32 Kbps ~ 320 Kbps
16 kHz ~ 48 kHz
MPEG-1, MPEG-2, Layer2, Layer3
Free Format
8 kHz ~ 48 kHz
ADIF, ADTS
Free Format
8 kHz ~ 48 kHz
MPEG-4
64 kbps ~ 1.5 Mbps
8 kHz ~ 48 kHz
LPCM
8 bit / 16 bit / 24 bit
128 Kbps ~ 320 Kbps
8 kHz ~ 48 kHz
WMA7, WMA8, WMA9 Standard
~ 768 Kbps
M0: up to 2 Channel @ 48 kHz
(Except LBR mode),
M1: up to 5.1 Channel @ 48 kHz,
M2: up to 5.1 Channel @ 96 kHz
WMA 10 Pro
Free Format
8 kHz ~ 48 kHz
OGG Vorbis
ENGLISH
•• Maximum data transfer rate: 20 Mbps (Mega bit per second)
•• External supported subtitle formats : *.smi, *.srt, *.sub
(MicroDVD, SubViewer1.0/2.0), *.ass, *.ssa, *.txt (TMplayer), *.psb
(PowerDivX)
Supported Photo Formats
File Format
Item
Available
File Type
jpeg, jpg, jpe
Photo Size
BMP
1 Depending on model
2 Depending on country
Photo Size
Resolution
SOF0: Baseline
SOF1: Extend Sequential
SOF2: Progressive
Minimum: 64 (W) x 64 (H)
Maximum (Normal Type):
15,360 (W) x 8,640 (H)
Maximum (Progressive Type):
1,920 (W) x 1,440 (H)
Minimum: 64 (W) x 64 (H)
Maximum: 9,600 (W) x 6,400 (H)
Available
File Type
Interlace, Non-Interlace
Photo Size
Minimum: 64 (W) x 64 (H)
Maximum (Interlace):
1,200 (W) x 800 (H)
Maximum (Non-Interlace):
9,600 (W) x 6,400 (H)
PNG
* BMP and PNG format files may be slower to display than JPEG.
17
To see web manual
To obtain detailed User Guide information, please visit www.lg.com.
ENGLISH
Troubleshooting
Cannot control the TV with the remote control.
•• Check the remote control sensor on the product and try again.
•• Check if there is any obstacle between the product and the remote
control.
•• Check if the batteries are still working and properly installed (
to , to ).
No image display and no sound is produced.
•• Check if the product is turned on.
•• Check if the power cord is connected to a wall outlet.
•• Check if there is a problem in the wall outlet by connecting other
products.
The TV turns off suddenly.
•• Check the power control settings. The power supply may be
interrupted.
•• Check if the auto-off function is activated on the settings related
time.
•• If there is no signal while the TV is on, the TV will turn off
automatically after 15 minutes of inactivity.
When connecting to the PC (HDMI), no signal is detected.
•• Turn the TV off/on using the remote control.
•• Reconnect the HDMI cable.
•• Restart the PC with the TV on.
18
Abnormal Display
•• If the product feels cold to the touch, there may be a small “flicker”
when it is turned on. This is normal, there is nothing wrong with
product.
•• This panel is an advanced product that contains millions of pixels.
You may see tiny black dots and/or brightly coloured dots (red, blue
or green) at a size of 1 ppm on the panel. This does not indicate a
malfunction and does not affect the performance and reliability of
the product. This phenomenon also occurs in third-party products
and is not subject to exchange or refund.
•• You may find different brightness and colour of the panel
depending on your viewing position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel.
It is not related with the product performance, and it is not
malfunction.
•• Displaying a still image for a prolonged period of time may cause
image sticking. Avoid displaying a fixed image on the TV screen for
a long period of time.
Generated Sound
•• “Cracking” noise: A cracking noise that occurs when watching or
turning off the TV is generated by plastic thermal contraction due
to temperature and humidity. This noise is common for products
where thermal deformation is required.
•• Electrical circuit humming/panel buzzing: A low level noise is
generated from a high-speed switching circuit, which supplies a
large amount of current to operate a product. It varies depending
on the product. This generated sound does not affect the
performance and reliability of the product.
Specifications
(Depending on country)
Analogue TV
(Depending on Country)
Television system
DVB-T/T21
DVB-C
DVB-S/S2
PAL B/B, PAL B/G,
PAL D/K, PAL-I,
SECAM B/G, SECAM D/K,
NTSC-M
Programme coverage
VHF, UHF, C-Band, Ku-Band
VHF, UHF, CATV
Maximum number of
storable programmes
DVB-T/T2 & Analogue TV : 2,000
DVB-S/S2 : 6,000
External antenna
impedance
75 Ω
ENGLISH
Broadcasting Specifications
Digital TV
(Depending on Country&Model)
1 Only DVB-T2 support models.
FM RADIO (Only LK526*)
FM Tuning Range
87.50 to 108.00 MHz
Maximum number of storable programmes
99
AC/DC Adapter
32LK51*, 32LK520*
43/49LK51*, 32LK526*, 43/49LK52*
Manufacturer : Lien Chang
Model : LCAP45
Manufacturer : APD
Model : DA-48G19
Manufacturer : Chicony
Model : A16-048N2A
Manufacturer : Lien Chang
Model : LCAP40
Manufacturer : APD
Model : DA-65F19
Manufacturer : Chicony
Model : A16-065N4A
Input : AC 100 - 240 V ~ 50/60 Hz
Output : DC 19 V
2.53 A
Input : AC 100 - 240 V ~ 50/60 Hz
Output : DC 19 V
3.42 A
Environment condition
Operating Temperature
0 °C to 40 °C
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
Less than 85 %
•• The energy information provided with the product is indicated in accordance with the regulations of each country. (Depending on Country)
-- The Energy consumption is measured in accordance with IEC 62087.
•• Actual Energy consumption may vary depending on factors such as the type of video content being played and TV settings.
19
HDMI-DTV supported mode
Resolution
ENGLISH
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
31.46
31.50
31.47
31.50
31.25
37.50
45.00
44.96
28.12
33.75
33.72
56.25
67.50
67.43
27.00
26.97
33.75
33.71
59.94
60.00
59.94
60.00
50.00
50.00
60.00
59.94
50.00
60.00
59.94
50.00
60.00
59.94
24.00
23.97
30.00
29.97
640 x 480
720 x 480
720 x 576
1280 x 720
1920 x 1080
HDMI-PC supported mode
Use HDMI IN 1 for PC mode
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
640 x 350
31.46
70.09
720 x 400
31.46
70.08
640 x 480
31.46
59.94
800 x 600
37.87
60.31
1024 x 768
48.36
60.00
1152 x 864
54.34
60.05
1360 x 768
47.71
60.01
1280 x 10241
63.98
60.02
1920 x 1080
67.50
60.00
1
1 Except for 32LK51*, 32LK52*, 32LK53*, 32LK55*
20
Component port connecting
information
Component ports on the TV
Video output ports on DVD player
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
Signal
Component
480i / 576i
O
480p / 576p
O
720p / 1080i
O
1080p
O
(Only 50 Hz / 60 Hz)
Open Source Software
Notice Information
ENGLISH
To obtain the source code under GPL, LGPL, MPL, and other open source
licenses, that is contained in this product, please visit http://opensource.
lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM
for a charge covering the cost of performing such distribution (such
as the cost of media, shipping, and handling) upon email request to
opensource@lge.com.
This offer is valid for a period of three years after our last shipment of
this product. This offer is valid to anyone in receipt of this information.
Licenses
Supported licenses may differ by model.
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing Administrator, Inc. in the United States and other
countries.
(Only LK51*T*, LK52*T*, LK53*T*, LK55*T*)
For DTS patents, see http://patents.dts.com. Manufactured under
license from DTS Licensing Limited. DTS, the Symbol, &
DTS and the Symbol together, DTS 2.0 Channel, DTS 2.0+Digital Out,
DTS-HD, and DTS Virtual:X are registered trademarks
or trademarks of DTS, Inc. in the United States and/or other
countries. © DTS, Inc. All Rights Reserved.
Manufactured under license from Dolby Laboratories. Dolby, Dolby
Vision, Dolby Audio, Dolby Atmos, and the double-D symbol are
trademarks of Dolby Laboratories.
21
Regulatory
ENGLISH
WARNING!
Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to
children, can be avoided by taking simple precautions such as:
•• Using cabinets or stands recommended by the manufacturer of the television set.
•• Only using furniture that can safely support the television set.
•• Ensuring the television set is not overhanging the edge of the supporting furniture.
•• Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set
to a suitable support.
•• Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture.
•• Educating children about the dangers of climbing on furniture to reach the television set or its controls.
If your existing television set is being retained and relocated, the same considerations as above should be applied.
Symbols
Refers to alternating current(AC).
Refers to direct current(DC).
Refers to class II equipment.
Refers to stand-by.
Refer to “ON” (power).
Refers to dangerous voltage.
22
Environmental Information
(Only India)
ENGLISH
Disposal of your old appliance (as per e-waste Rules)
1. When this crossed out wheeled bin symbol is depicted on the product and its operator’s manual, it means the product is
covered by the e-waste Management and Handling Rules, 2011 and are meant to be recycled, dismantled, refurbished
or disposed off.
2. Do’s :
a. The product is required to be handed over only to the authorized recycler for disposal.
b. Keep the product in isolated area, after it becomes non-functional/unrepairable so as to prevent its accidental
breakage.
Don’t :
a. The product should not be opened by the user himself/herself, but only by authorized service personnel.
b. The product is not meant for re-sale to any unauthorized agencies/scrap dealer/kabariwalah.
c. The product is not meant for mixing into household waste stream.
d. Do not keep any replaced spare part(s) from the product in exposed area.
3. Any disposal through unauthorized agencies/person will attract action under Environment (Protection) Act 1986.
4. “This product is complied with the requirement of Hazardous Substances as specified under Rule 13 (1) & (2) of the
E-Waste (Management & Handling) Rules, 2011.”
5. To locate a nearest collection centre or call for pick-up (limited area only) for disposal of this appliance, please contact
Toll Free No. 1800-315-9999 / 1800-180-9999 for details. All collection centre and pick up facilities are done by third
LGE Internal parties
Use with
Only
LG Electronics India Pvt. Ltd. Merely as a facilitator. For more detailed information, please visit : http://
www.lg.com.
LGE
Internal Use Only
Œ•›Œ•ŠŒ
†Gw™–‹Œ‹GšŒ•›Œ•ŠŒ
( -
( -
“
,
.
)
)
-
23
Record the model number and serial number of the TV.
Refer to the label on the back cover and quote this
information to your dealer when requiring any service.
Model
Serial No.
Download PDF