LG 55UB83000GI, 40UB800T, 49UB830T-TG, 49UB83000GI, 60UB820T-TH, 60UB830T-TG, 49UB700T, 49UB820T, 49UB829Y, 55UB700T Quick Setup guide

LG 55UB83000GI, 40UB800T, 49UB830T-TG, 49UB83000GI, 60UB820T-TH, 60UB830T-TG, 49UB700T, 49UB820T, 49UB829Y, 55UB700T Quick Setup guide
SMART TV Quick Setup Guide
*MBM64101621*
* Image shown may differ from your TV.
* Image shown on a PC or mobile phone may vary depending on the OS(Operating System).
Network Setting
Troubleshooting Network Problems
Premium Apps are pre-installed on the TV. These may vary by country.
1
Wireless Network Connection
(Home) button to access the
Press the
Home menu. Select SETTINGS and press
Wheel(OK).
4
1
The device automatically tries to connect to the
network available(wired network first).
(Home) button to access the
Press the
Home menu. Select SETTINGS and press
Wheel(OK).
Check the router or consult your Internet
service provider.
Network Status
Network Connection
TV


Wireless router
SETTINGS
SETTINGS
or
LG wireless
dongle
2
SETTINGS
Network Status
2
Select the NETWORK → Network Connection
menu.
Network Connection
Wireless : AAA
Wireless router
NOTE
Wireless : CCC
Soft AP
Miracast™ / Intel’s WiDi
Wi-Fi Direct
My TV Name
My TV Name
Wired Network Connection
Wi-Fi Direct
Refresh List
Wireless : 22222
Miracast™ / Intel’s WiDi
yy LG wireless dongle is required to use Wi-Fi network.
yy Do not remove the wireless dongle while the wireless network is working.
Soft AP
Manual Setup
Wireless : 11111
If you want to connect your TV to a wireless
router, select the network you want and enter the
password.
: NETCAST4
Check the TV or the router.
TV
Enjoy various Smart TV features through network.
To connect to a wired network:
To connect to a wireless network:
Connect a LAN cable to the back of TV.
Requires a wireless router or access point.
5
Start Connection
Gateway
DNS
Internet
1
The connected network is displayed.
Select Complete to confirm the network connection.
If you select the Other Network List, the network
list available is displayed.
Network Connection
Network is connected.
Wireless : AAA
Select [Other Network List] to connect to another network.
Complete
P/NO : MBM64101621 (1505 -REV01)
Printed in Korea
1 Unplug the power cord of the AP, cable modem
and try to connect after 5 seconds.
2 Initialize(Reset) the AP or cable modem.
3 Check that the MAC address of the TV/router
is registered with your Internet service provider.
(The MAC address displayed on the right
pane of the network status window should be
registered with your Internet service provider.)
4 Check the router manufacturer’s website to
make sure your router has the latest firmware
version installed.
When an ✔ appears TV.
or
Wired router
Internet
Forgot your password? Contact your AP manufacturer.
Connect to your wired or wireless network.
Internet connection
DNS
Network Status
Wireless : AAA
Enter security key of network.
Network Connection
: NETCAST4
Follow the instructions below that correlate to your
network status.
Network Connection
3 Select the Start Connection.
Gateway
When an ✔ appears TV, Gateway and DNS.
Network Status
Wireless : BBB
Network Status
TV
Network Connection
Wired Network
Network Connection
Select the NETWORK → Network Status menu.
NETWORK
Choose the network you want.
NETWORK
3 Contact internet companies or AP
companies.
If you select Cancel or it fails to connect to the
network, the network list available is displayed.
Choose the network you want.
SETTINGS
Internet
1 Unplug the power cord of the AP, cable modem
and try to connect after 5 seconds.
2 Initialize(Reset) the AP or cable modem.
SETTINGS
Cancel
DNS
When an ✔ appears TV and Gateway.
SETTINGS
Connecting to the network.
Gateway
Other Network List
Check the connection status of TV, AP and
cable modem.
2 Power off and power on TV, AP and cable
modem.
3 If you are using a static IP, enter IP directly.
4 Contact internet companies or AP companies.
Additional points to check when using a
yy
wireless connection
1 Check the password for the wireless
connection in the router settings window.
2 Change the router SSID (network name) or
the wireless channel.
Please call LG Customer Service if you experience any problems.
SMART TV Quick Setup Guide
Updating the TV Firmware
Miracast Setting
(Home) →
SETTINGS → SUPPORT → Software Update
Uses Software Update to check and obtain the latest version.
It is also possible to check manually for available updates.
Miracast allows a portable device to securely send video and sound to TV wirelessly.
SETTINGS
Installing & Setting
1 Install the SmartShare PC SW program on your PC.
2 Go to www.lg.com. Then, select your region.
3 Select SUPPORT. Then, search for your model.
Software Update
Check Update Version
5 You can run the program when installation is complete.
yy SmartShare service is only available if TV and other devices are connected via a single AP (Router).
The device which is applied MiracastTM and intel's WiDi
technology can be shown on the TV.
On
MiracastTM / Intel's WiDi
Set it to On.
If an update is available, a prompt will appear to perform the update.
Device Name
a
Connection
Connection
TAAAA
1 Miracast is set to On( a ) on your TV and portable device.
Go to the Network settings to set the Miracast.
2 When your portable device is detected, select the device.
Automatic update mode If an update is available, the update automatically starts without prompting.
4 Select Drivers & Software or SOFTWARE UPDATE. Then, select SmartShare PC SW.
NOTE
MiracastTM / Intel's WiDi
Checks the version installed and when an update is available, the download process
can be performed manually.
NOTE
yy When the update starts, the update progress window appears for a short time and disappears.
yy The latest version can be obtained via digital broadcast signals or internet connections.
yy Changing the programme while downloading the software via digital broadcast signal interrupts the download
process. Returning to the initial programme allows downloading to resume.
yy If software is not updated, certain functions may not work properly.
Wi-Fi Direct Setting
SmartShare Connection to Smartphone
WiDi (Wireless Display) Setting
WiDi represents Wireless Display. Intel’s WiDi (Wireless Display) technology enables easy and fast connection
without wires or internet network for mirrored and dual monitor display on your TV. You can sit back and experience
your favorite movies, videos, photos, online shows and more in full HD on your TV with great image clarity and
sound.
1
Intel's WiDi is set to On. Connect your laptop to AP. (Without AP, it is possible to this function; it is
recommended to connect to AP.) Your laptop runs the Intel WiDi programme.
2
It detects LG Smart TVs available, which supports WiDi. In the list, select the TV you want and click Connect.
Enter the PIN number( a ) shown on the screen into the input field( b ) on your laptop and then click Continue.
(Home) →
SETTINGS → NETWORK → Wi-Fi Direct
The Wi-Fi Direct function supports wireless connection technology. With SmartShareTM, you can share files or
screens of devices connected to Wi-Fi Direct.
SETTINGS
1 Check that Wi-Fi is enabled on your smartphone. To use SmartShare, both devices must on the same local
network.
2 Install/run the app for sharing content on your smartphone (It's called SmartShare on LG phones).
3 Enable your smartphone to share content files with other devices.
4 Open SmartShare application.
(Home) → SmartShare.
5 Select the file type you want to play (movie, audio or photo).
6 Select a movie, music or photo file to play on the TV.
7 Play the media file to view and enjoy it on your TV.
1
Wi-Fi Direct
On
Wi-Fi Direct
Device Name
TAAAA
BBBB
a
Connection

Automatically connect without asking
No
yy When you connect the TV and laptop, you should set up TV mode for “Live TV” and “external input”. If not,
your computer cannot detect LG Smart TV.
If Wi-Fi Direct is set to On, a list of available devices
appears.
»»
SETTINGS → NETWORK
To use Wi-Fi Direct, go to
and set Wi-Fi Direct( a ) to On.
[Intel's WiDi] Request connection
SETTINGS
[TAAAA]
Do you want to request a connection?
Yes
NOTE
2
Enter the PIN of TV to device.
When you are prompted to request connection, select Yes.
Wi-Fi Direct is now connected to your TV.

PIN : ********
********
b
a
Remain: 80 second(s)
Cancel
* If you are not using Wi-Fi Direct to minimize the interference between Wi-Fi devices, it is recommended to set
Wi-Fi Direct( a ) to Off. You can only use devices that support Wi-Fi Direct.
TV Screen
3
Notebook Screen
The wireless environment may affect the screen display. If the connection is poor, the Intel WiDi connection may
be********
lost.
* LG TV is not need to register.
* For more information on Intel WiDi, visit http://intel.com/go/widi.
* A list of Intel's WiDi devices does not appear on the TV screen. Please check the list on your laptop.
Please call LG Customer Service if you experience any problems.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement