LG | 42LC2DR | LG 42LC2DR Owner’s Manual

PLASMA TV LCD TV
LCD TV MODEL
42LC2DR
42LB2DE
47LB2DE
PLASMA TV MODEL
50PB2DR
Please read Information Manual included together
before reading this manual and operating your set.
DVB is a registered trademark
of the DVB Project
(42/47LB2DE ONLY)
P/NO : 38289U0569D (0702-REV05)
1
CONTENTS
CONTENTS
INTRODUCTION
SPECIAL FUNCTIONS
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Home Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Front & Back Panel Information (For 50PB2DR) . 8-9
Front & Back Panel Information (For 42LC2DR) . 10-11
Remote Control Key Functions . . . . . . . . . . . . . . . . . . . 12-13
DVR (Digital Video Recorder)
INSTALLATION
Swivel Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Attaching the TV to a wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Back Cover for Wire Arrangement . . . . . . . . . . . . . . . . 16-17
Desktop Pedestal Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
CONNECTIONS & SETUP
Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
HDSTB Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-22
VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-24
Another A/V Source Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Digital Audio Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
External A/V Source Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-29
PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-33
BASIC OPERATION
Turning the TV On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Initializing setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Programme Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
2
Timeshift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-38
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39-41
Manual Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Recorded TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43-48
Scheduled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
HDD Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Record Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
PIP/POP/Twin Picture
Watching PIP/POP/Twin Picture . . . . . . . . . . . . . . . . . . . . . . . 52
Selecting an Input Signal Source
for PIP/Twin Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
TV Program Selection for PIP . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Moving the PIP sub picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Swapping PIP/Twin Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Adjusting Main and Sub Picture Sizes
for Twin Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
POP(Picture-out-of-Picture: Programme Scan) . . . . . . . . . . 55
TELETEXT
Switch On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Simple Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Top Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Fastext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Special Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
EPG (Electronic Programme Guide)
Switch on/off EPG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Select a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
TV MENU
Time Setting
On Screen Menus Selection and Adjustment
....
59
Auto Programme Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Manual Programme Tuning . . . . . . . . . . . . . . . . . . . . . . . . . 61-62
Fine tuning (In Analogue mode only) . . . . . . . . . . . . . . . 63
Assigning a station name (In Analogue mode only) . . . . 64
Programme Edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65-66
Calling up the Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Digital signal strength (In Digital mode only) . . . . 68
Main Picture Source Selection . . . . . . . . . . . . . . . . . . . . . . . . . 69
Aux. Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Booster (In Digital mode only) . . . . . . . . . . . . . . . . . . . . . . . . . 71
Picture Adjustment
Picture Status Memory (PSM) . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Adaptive Picture Mode (APM) . . . . . . . . . . . . . . . . . . . . . . . . . 73
Brightness Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Manual Picture Control (PSM-User Option) . . . . . 74
XD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Colour Temperature Control . . . . . . . . . . . . . . . . . . . . . . . 76-77
- Auto Colour Temperature Control . . . . . . . . . . . . . . . . . . 76
- Manual Colour Temperature Control . . . . . . . . . . . . . . 77
Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78-79
- Cinema . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
- Black Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Video Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Audio Adjustment
Sound Status Memory (SSM) . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Manual Sound Control (SSM-User Option) . . . . 82-83
Auto Volume Leveller (AVL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
TV Speakers On/Off Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Stereo Reception (In Analogue mode only) . . . . . . 87
Sound output selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Optional Features
CONTENTS
Setup(Programme)
Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Manual Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
On/Off Time Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Auto Sleep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Subtitle (In Digital mode only) . . . . . . . . . . . . . . . . . . . . . . . . . 93
Child Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Picture Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
XD Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
ISM (Image Sticking Minimization) Method
(50PB2DR only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Low Power (50PB2DR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Front Index (50PB2DR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Lock Adjustment
Setting Up Your password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Lock System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Set Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Block Programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Parental Guidance (In Digital mode only) . . . . . . . . 103
Aux. Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
APPENDIX
External Control Device Setup . . . . . . . . . . . . . . . . .104-110
IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111-112
Programming the Remote Control . . . . . . . . . . . . . . . . . 113
Programming Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114-115
Troubleshooting Checklist . . . . . . . . . . . . . . . . . . . . . . . . 116-117
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
After reading this manual, keep it handy for future reference.
3
INTRODUCTION
FEATURE OF THIS TV
What is a Plasma TV?
INTRODUCTION
Using plasma is the best way to achieve flat panel
displays with excellent image quality and large screen
sizes that are easily viewable. The Plasma TV can be
thought of as a descendant of the neon lamp and or
a series of fluorescent lamps.
How does it work?
Plasma TV is an array of cells, known as pixels, which
are comprised of three sub-pixels, corresponding to
the colors red, green, and blue. Gas in a plasma state
is used to react with phosphors in each sub-pixel to
produce colored light (red, green, or blue). These
phosphors are the same types used in Cathode Ray
Tube (CRT) devices such as televisions and common
computer monitors.
Plasma TV offers a rich, dynamic display because
each sub-pixel is individually controlled by advanced
electronics to produce over 16 million different colors. This means that you get perfect images that are
easily viewable in a display that is fewer than five
inches thick.
160° - Wide angle range of vision
Your flat panel plasma screen offers an exceptionally
broad viewing angle of over 160 degrees. This means
that the display is clear and visible to viewers anywhere in the room.
Wide Screen
The wide screen offers a theater-like experience in
your own home.
Multimedia
Connect your plasma display to a PC and use it for
conferencing, games, and Internet browsing. The
Picture-in-Picture feature allows you to view your PC
and video images simultaneously.
Versatile
The light weight and thin size makes it easy to install
your plasma display in a variety of locations where
conventional TVs do not fit.
4
The Plasma TV Manufacturing Process: a few
minute colored dots may be present on the
Plasma TV screen
The Plasma TV is composed of 0.9 to 2.2 million
cells. A few cell defects will normally occur in the
Plasma TV manufacturing process. Several tiny,
minute colored dots visible on the screen should be
acceptable. This also occurs in other Plasma TV
manufacturers' products. The tiny dots appearing
does not mean that this Plasma TV is defective. Thus
a few cell defects are not sufficient cause for the
Plasma TV to be exchanged or returned. Our production technology minimizes these cell defects during the manufacture and operation of this product.
Cooling Fan Noise-This feature is not available for all models.
In the same way that a fan is used in a PC computer
to keep the CPU (Central Processing Unit) cool, the
Plasma TV is equipped with cooling fans to cool the
Monitor and improve its reliability. Therefore, a certain level of noise could occur while the fans are
operating and cooling the Plasma TV.
The fan noise doesn't have any negative effect on
the Plasma TV's efficiency or reliability. The noise
from these fans is normal during the operation of
this product. We hope you understand that a certain
level of noise from the cooling fans is acceptable and
is not sufficient cause for the Plasma TV to be
exchanged or returned.
FOR LCD TV
INTRODUCTION
If the TV feels cold to the touch, there may be a
small “flicker” when it is turned on. This is normal,
there is nothing wrong with TV.
Some minute dot defects may be visible on the
screen, appearing as tiny red, green, or blue spots.
However, they have no adverse effect on the monitor's performance.
Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so
may produce some temporary distortion effects on
the screen.
On Disposal
a. The fluorescent lamp used in this product contains a small amount of mercury.
b. Do not dispose of this product with general
household waste.
c. Disposal of this product must be carried out in
accordance to the regulations of your local
authority.
5
INTRODUCTION
ACCESSORIES
Ensure that the following accessories are included with your product. If an accessory is missing, please contact the dealer where you purchased the product.
INPUT
D/A
MODE
TV
POWER
INPUT
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
INTRODUCTION
MENU
PIP INPUT
LIVE TV
EXIT
Owner's Manual
INFO
MARK
OK
TIME
SHIFT
TIME
SHIFT
Q.VIEW
VOL
PR
PAGE
MUTE
1.5V 1.5V
1
2
3
4
5
6
7
8
9
0
FAV
INDEX
TIME
REVEAL
I/II
APM
SLEEP
ADJUST
LIST
SIZE
?
Owner’s Manual
Batteries
Remote Control
Power Cord
* lightly wipe stained spot on the exterior only with the
cleansing cloths for the product exterior if there is
stain or fingerprint on surface of the exterior.
Polishing Cloth
Polish the screen with the cloth.
* Do not wipe roughly when removing stain. Please be
aware that excessive force may cause scratch or discoloration.
For 50PB2DR
2-Wall brackets
2-eye-bolts
For 42LC2DR/42LB2DE/47LB2DE
2-TV Bracket Bolts
6
2-TV Brackets,
2-Wall Brackets
Cable Management
(Refer to p.17)
Twister Holder
Arrange the wires
with the twister holder.
HOME MENU
This menu is a contents guide.
In the HOME Menu, you can access the recorded list of DVR, the TV Guide,
the DVR recording schedule, Manual Recording of the DVR or the TV Menu.
INTRODUCTION
INPUT
D/A
MODE
TV
POWER
INPUT
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
INFO
PIP INPUT
DVR
Guide G p.58
MENU
LIVE TV
EXIT
TIME
SHIFT
G p.36
MARK
Schedule G p.49
TIME
SHIFT
OK
TV Menu
G p.59
Q.VIEW
VOL
PR
PAGE
7
INTRODUCTION
FRONT & BACK PANEL INFORMATION
This is a representation of the front panel of model 50PB2DR.
■
Image shown may be somewhat different from your TV.
INTRODUCTION
Front Panel Controls
PROGRAMME
(D,E)Button
PR
PR
VOL
VOL
PR
OK
PR
VOL
PR
VOL
OK
VOLUME (F,G)
Button
OK Button
OK
PR
MENU
MENU
INPUT
INPUT
MENU Button
VOL Button
INPUT
VOL
OK
MENU
OK
PR
OK
MENU
INPUT
MENU
(POWER) Button
INPUT
MENU
VOL
INPUT
INPUT
OK
Remote Control Sensor
MENU
INPUT
Power Standby Indicator
Illuminates red in standby mode.
When the TV is turned on, the indicator blinks
white and then illuminates white before the picture is displayed.
INDEX
8
Digital, Analogue
AV mode
Component mode
HDMI1/DVI or HDMI2 mode
This manual explains the features available on the 50PB2DR.
■
Image shown may be somewhat different from your TV.
Back Connection Panel
AUDIO R S-VIDEO
AUDIO Input
Connections are available for listening to
stereo sound from an external device.
VIDEO
L/MONO
VIDEO Input
Connects the video signal from a video
device.
INTRODUCTION
AV IN 2
10
AV OUT
1
2
AV OUT
3
(
) (MONO)
VIDEO
VIDEO AUDIO AUDIO S-VIDEO
AV INAV
1
4
5
HDMI IN
HDMI IN
2
1 (DVI)
S-VIDEO
IN 1
VIDEO
VIDEOAUDIO
COMPONENT
IN
COMPONENT
6
8
DIGITAL AUDIO
RS-232C IN
OUT
(CONTROL & SERVICE)
OPTICAL
2
ANTENNA
IN
AUDIO (RGB/DVI)
7
RGB (PC/DTV)
IN
9
REMOTE
CONTROL IN
RGB IN
DIGITAL AUDIO
RS-232C IN
OPTICAL
OUT
(CONTROL & SERVICE)
AUDIO
RGB IN
REMOTE
CONTROL IN
AUDIO (RGB/DVI)
ANTENNA
IN
1 (DVI)
RGB (PC/DTV)
1
AV OUT
Connect a second TV or monitor.
6
RS-232C IN (CONTROL &SERVICE) PORT
Connect to the RS-232C port on a PC.
2
AV (Audio/Video) IN 1
Connect audio/video output from an external
device to these jacks.
S-VIDEO
Connect S-Video out from an S-VIDEO device.
7
ANTENNA IN
Connect antenna signals to this jack.
8
RGB/AUDIO IN
Connect the output from a set-top box or PC to
the appropriate input port.
9
Remote Control Port
Connect your wired remote control.
10
Power Cord Socket
For operation with AC power.
Caution: Never attempt to operate the TV on DC
power.
3
COMPONENT IN
Connect a component video/audio device to
these jacks.
4
HDMI IN
Connect a HDMI signal.
Or DVI(VIDEO)signal to the this port with a
HDMI to DVI cable.
5
DIGITAL AUDIO OUT OPTICAL
Connect digital audio from various types of
equipment. Note: In standby mode, these ports
do not work.
9
INTRODUCTION
FRONT & BACK PANEL INFORMATION
This is a front panel of 42LC2DR/42LB2DE/47LB2DE.
■
Image shown may be somewhat different from your TV.
Front Panel Controls
42LC2DR
INTRODUCTION
PR
PROGRAMME
(D,E)Button
VOL
VOLUME (F,G)
Button
OK Button
OK
MENU
MENU Button
INPUT
INPUT Button
R
Remote Control Sensor
(POWER) Button
Power Standby Indicator
Illuminates red in standby mode.
When the TV is turned on, the indicator
blinks white and then illuminates white
before the picture is displayed.
42/47LB2DE
Remote Control Sensor
Power Standby Indicator
• illuminates red in standby mode.
• illuminates white when the set is
switched on.
INPUT
MENU
POWER INPUT MENU
Button Button Button
10
OK
VOL
VOLUME
OK
F
G)Buttons
(
,
Button
PR
PROGRAMME
(E,D)Buttons
This is the back panel of 42LC2DR/42LB2DE/47LB2DE.
■
Image shown may be somewhat different from your TV.
Back Connection Panel
L/MONO
AUDIO
R
S-VIDEO
VIDEO Input
Connects the video signal from a
video device.
VIDEO
AC IN
AV IN 2
10
42LC2DR
(
1
)
AUDIO
2 S-VIDEO
AV IN 1
4
HDMI IN
VIDEO
HDMI IN
3
(MONO)
VIDEO
AUDIO
S-VIDEO
AUDIO
COMPONENT IN
AV IN 1
6
RS-232C IN
DIGITAL AUDIO
(CONTROL & SERVICE)
OUT
OPTICAL
2
5
42/47LB2DE
AV OUT
AV OUT
VIDEO
REMOTE
CONTROL IN
RGB IN
RS-232C IN
DIGIT AUDIO
DIGITAL
(CONTROL &ANTENNA
SERVICE)
OUT
AUDIO (RGB/DVI)
OPTICAL
2
VIDEO
AUDIO
COMPONENT IN
8
9
RGB IN
REMOTE
CONTROL IN
7
IN
1 (DVI)
INTRODUCTION
AUDIO Input
Connections are available for listening to stereo sound from an
external device.
RGB (PC/DTV)
AUDIO (RGB/DVI)
ANTENNA
IN
1 (DVI)
RGB (PC/DTV)
1
AV OUT
Connect a second TV or monitor.
6
RS-232C IN (CONTROL &SERVICE) PORT
Connect to the RS-232C port on a PC.
2
AV (Audio/Video) IN 1
Connect audio/video output from an external
device to these jacks.
S-VIDEO
Connect S-Video out from an S-VIDEO device.
7
ANTENNA IN
Connect cable signals to this jack.
8
RGB/AUDIO IN
Connect the output from a set-top box or PC to
the appropriate input port.
9
Remote Control Port
Connect your wired remote control.
10
Power Cord Socket
For operation with AC power.
Caution: Never attempt to operate the TV on DC
power.
3
COMPONENT IN
Connect a component video/audio device to
these jacks.
4
HDMI IN
Connect a HDMI signal.
Or DVI(VIDEO)signal to the this port with a
HDMI to DVI cable.
5
DIGITAL AUDIO OUT OPTICAL
Connect digital audio from various types of
equipment. Note: In standby mode, these ports
do not work.
11
INTRODUCTION
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
D/A INPUT Selects digital or analogue mode.
(Digital TV /
Analogue TV)
INPUT
D/A
INTRODUCTION
INPUT External input modes rotate in regular sequence: Digital,
Analogue, AV1-2, Component 1-2, RGB-DTV (or RGBPC), HDMI1/DVI, HDMI2.
POWER Switches the set between ON and STANDBY.
ARC Selects your desired picture format. G p.95
+/-
mode control
buttons
MODE
TV
POWER
INPUT
VCR
BRIGHT
ARC
DVD
PIP
1
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
INFO
PIP INPUT
Adjusts brightness on screen. G p.73
It returns to the default settings brightness by changing
mode source.
Use for DVR record or trick play. G p.42, 43, 49
Controls the
mode.
For further details, see the D V R section.
VCR/DVD Control some video cassette recorders or DVD players
control buttons ("RECORD" button is not available for DVD player).
MENU
LIVE TV
EXIT
MARK
OK
TIME
SHIFT
TIME
SHIFT
OK Accepts your selection or displays the current mode.
THUMBSTICK
(Up/Down/Left
Right/OK)
Adjusts menu settings.
Selects menu item.
VOLUME +/- Increase/decrease the sound level.
Q.VIEW
VOL
PR
MUTE
Q.VIEW Returns to the previously viewed programme.
MUTE Switches the sound on or off.
PROGRAMME +/- Selects a programme.
PAGE Move from one full set of screen information to the next
UP/DOWN
one.
NUMBER button
LIST Displays the programme list. G p . 6 7
FAV (FAVOURITE) Displays the selected favourite programmes.
I/II Selects the sound output or the audio mode. G p . 8 7
APM Concurrently, compare with the Dynamic, Standard, Mild,
User1 and User2 on the screen. G p . 7 3
SLEEP Sets the sleep timer. G p . 9 1
ADJUST Adjust the screen Resolution, position, clock, and phase. G p . 3 3
12
1
2
3
4
5
6
7
8
9
LIST
0
FAV
SIZE
INDEX
TIME
REVEAL
I/II
APM
SLEEP
ADJUST
?
PAGE
TV, VCR, DVD, Selects the remote operating mode: TV, VCR, DVD. Select other operating modes, for the
remote to operate external devices.
GUIDE Shows a programme schedule. G p . 5 8
INTRODUCTION
INFO Shows the present screen information.
PIP Switches to PIP, POP and Twin picture modes or off mode. G p.52-55
PIP PR +/- Selects a programme for the sub picture.G p . 5 3
SWAP Alternates between main and sub picture in PIP/Twin picture mode.G p . 5 4
PIP INPUT Selects the input mode for the sub picture.G p . 5 3
COLOUR They are used as per the indications or functions displayed on the TV screen in the case of
Button Text displays (Teletext, EPG) and programme edit.
EXIT Returns to TV viewing from any menu.
MENU Selects a menu.
Enter to the
LIVE TV
mode.
When playing the recorded program: Return to the last selected input source.
When delaying: Return to the last selected input source.
MARK Selects the wanted functions.
1
TELETEXT These buttons are used for teletext.
BUTTONS Text button is used to enable teletext services while other buttons are for teletext functions.
* For further details, see the ‘Teletext’ section. G p.56-57
Remote control effective range
Installing Batteries
■
■
■
Open the battery compartment cover on the back
side and install the batteries matching correct
polarity (+with +,-with -).
■
Install two 1.5V AA batteries. Don’t mix old or
used batteries with new ones.
Use a remote control up to 7 meters distance and 30
degree (left/right) within the receiving unit scope.
■
Dispose of used batteries in a recycle bin to preserve environment.
Close cover.
INPUT
D/A
POWER
INPUT
MODE
TV
VCR
INPUT
D/A
POWER
MODE
TV
BRIGHT
ARC
DVD
INPUT
VCR
BRIGHT
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
INFO
ARC
DVD
PIP INPUT
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
INFO
PIP INPUT
13
INSTALLATION
SWIVEL STAND
This features is available on the 50PB2DR.
1
Separate the CABLE MANAGEMENT from TV.
And loosen the shaft bolt counterclockwise completely.
INSTALLATION
SHAFT bolt
CABLE MANAGEMENT
The TV can be conveniently swivelled on its stand 20° to the left or right
to provide the optimum viewing angle.
This features is available on the 42LC2DR/42LB2DE/47LB2DE.
30°
14
30°
The TV can be conveniently swivelled on its stand
30° to the left or right to provide the optimum
viewing angle.
ATTACHING THE TV TO A WALL
■
Image shown may be somewhat different from your TV.
Set it up close to the wall so the product doesn’t fall over when it is pushed backwards.
The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product
doesn’t fall over when it is pulled in the forward direction. It will prevent the product from falling forward and
hurting people. It will also prevent the product from damage caused by fall. Please make sure that children
don’t climb on or hang from the product.
■
42LC2DR/42LB2DE/47LB2DE
INSTALLATION
50PB2DR
Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.
* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.
Insert the eye-bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately ) on
the wall. Match the height of the bracket that is mounted on the wall to the holes in the product.
Ensure the eye-bolts or brackets are tightened securely.
■
Use a sturdy rope (must be purchased separately) to secure the TV. It is
safer to tie the rope so it runs horizontally between the wall and the TV.
15
INSTALLATION
BACK COVER FOR WIRE ARRANGEMENT
This features is available on the 50PB2DR.
1
Hold the CABLE MANAGEMENT with both hands and pull it backward as shown.
45°
INSTALLATION
2
Connect the cables as necessary.
To connect additional equipment, see the Connections & Setup section.
3
Install the CABLE MANAGEMENT as shown.
! NOTE
G
16
Do not hold the CABLE MANAGEMENT when moving the product.
- If the product is dropped, you may be injured or the product may be broken.
This features is available on the 42LC2DR/42LB2DE/47LB2DE.
■
Image shown may be somewhat different from your TV.
1
Connect the cables as necessary.
After connecting the cables neatly, arrange the cables to the Cable Holder.
To connect an additional equipment, see the Connections & Setup section.
INSTALLATION
AC IN
2
Install the CABLE MANAGEMENT as shown.
CABLE MANAGEMENT
How to remove the CABLE
MANAGEMENT
G
AC IN
Hold the CABLE MANAGEMENT
with both hands and pull it upward.
AC IN
3
Bundle the cables using the supplied twister holder.
! NOTE
G
AC IN
Do not hold the CABLE MANAGEMENT
when moving the product.
- If the product is dropped, you may be
injured or the product may be broken.
TWISTER HOLDER
17
INSTALLATION
DESKTOP PEDESTAL INSTALLATION
For proper ventilation, allow a clearance of 4inches on each side from the wall.
50PB2DR
42LC2DR/42LB2DE/47LB2DE
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
R
CONNECTIONS & SETUP
CAUTION
G
■
Ensure adequate ventilation by following the clearance recommendations.
Image shown may be somewhat different from your TV.
Power Supply
Short-circuit
Breaker
GROUNDING
Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods
are not possible, have a qualified electrician install a separate circuit breaker.
Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
18
4 inches
CONNECTIONS & SETUP
ANTENNA CONNECTION
Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections.
For optimum picture quality, adjust antenna direction if needed.
AV OUT
(
VIDEO
HDMI IN
Outdoor
Antenna
(VHF, UHF)
)
S-VIDEO
AUDIO
AV IN 1
DIGITAL AUDIO
RS-232C IN
OUT
(CONTROL & SERVICE)
2
RGB IN
AUDIO (RGB/DVI)
ANTENNA
IN
1 (DVI)
ANTENNA
IN
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
RGB (PC/DTV)
UHF
Antenna
VHF
Signal
Amplifier
ANTENNA
IN
To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.
■ If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.
■ If the antenna is not installed properly, contact your dealer for assistance.
■
! NOTE
G
AUDI
COMPONENT IN
OPTICAL
RF Coaxial Wire (75 ohm)
VIDEO
CONNECTIONS & SETUP
Wall
Antenna
Socket
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
The TV will let you know when the analogue and digital programme scans are complete.
19
REMOT
CONTRO
CONNECTIONS & SETUP
HDSTB SETUP
This TV can receive Digital Over-the-air signal without an external digital set-top box. However, if you do
receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown
below.
When connecting Component cable
1. How to connect
Y
CONNECTIONS & SETUP
1
PB
1
2
PR
L
R
Connect the video outputs (Y, PB, PR) of the digital set
top box to the COMPONENT IN VIDEO 1 jacks on
the set. Match the jack colors
(Y = green, PB = blue, and PR = red)
2
Connect the audio output of the digital set-top box to
the COMPONENT IN AUDIO 1 jacks on the set.
2. How to use
■
Turn on the digital set-top box.
(Refer to the owner’s manu-al for the digital set-top box.)
S-VIDEO
■
■
Select C o m p o n e n t 1 input source using the INPUT button
on the remote control.
VIDEO
AUDIO
COMPONENT IN
If connected to COMPONENT IN 2 input, select
C o m p o n e n t 2 input source.
Signal
Component 1/2
480i
Yes
No
No
480p
Yes
Yes
576i
Yes
No
Yes
ANTENNA
IN
576p
Yes
Yes
Yes
720p
Yes
Yes
Yes
1080i
Yes
Yes
Yes
1080p
24p/30p
No
Yes
RGB-DTV
HDMI
No
(24, 30, 50, 60 Hz)
(42/47LB2DE only)
* In some resolution (1080p), the PIP, Twin Picture, TV Guide, and some other functions are not available.
20
When connecting D-sub 15pin cable
1. How to connect
RGB IN
1
2
Connect the RGB output of the digital set-top box to the
R G B ( P C / D T V ) jack on the set.
REMOTE
CONTROL IN
AUDIO (RGB/DVI)
ANTENNA
IN
RGB (PC/DTV)
Connect the audio outputs of the digital set-top box to the
A U D I O ( R G B / D V I ) jack on the set.
2. How to use
■
1
Select R G B - D T V input source using the I N P U T button
on the remote control.
2
When connecting HDMI cable
1. How to connect
RGB OUTPUT
1
2
L
CONNECTIONS & SETUP
■
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
R
Connect the digital set-top box to H D M I I N jack on
the set.
No separated audio connection is necessary.
AUDIO
2. How to
use
VIDEO
COMPONENT IN
■
■
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
Select H D M I 1 / D V I or H D M I 2 input source using the
I N P U T button on the remote control.
HDMI IN
RS-2
DIGITAL AUDIO
(CONTROL
OUT
OPTICAL
2
1 (DVI)
! NOTE
G
If the digital set-top box supports Auto HDMI function, the
output resolution of the source device will be automatically
set to 1280x720p.
G
If the digital set-top box player does not support Auto HDMI
function, you need to set the output resolution appropriately.
To get the best picture quality, adjust the output resolution
of the source device to 1280x720p.
A
1
HDMI-DTV OUTPUT
21
CONNECTIONS & SETUP
When connecting HDMI to DVI cable
RGB IN
HDMI IN
RS-232C IN
DIGITAL AUDIO
(CONTROL & SERVICE)
OUT
AUDIO (RGB/DVI)
OPTICAL
ANTENNA
IN
2
RGB (PC/DTV)
1 (DVI)
2
1
CONNECTIONS & SETUP
DVI-DTV OUTPUT
L
R
1. How to connect
1
Connect the DVI output of the digital set-top box to the H D M I I N 1 ( D V I ) jack on the set.
2
Connect the audio output of the digital set-top box to the A U D I O ( R G B / D V I ) jack on the set.
2. How to use
22
■
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
■
Select H D M I 1 / D V I input source using the I N P U T button on the remote control.
REM
CONTR
VCR SETUP
To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
■ If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the
screen. This phenomenon is common to all manufactures and in consequence the manufactures warranty
does not cover the product bearing this phenomenon.
■
When connecting with an antenna
RGB IN
REMOTE
CONTROL IN
AUDIO (RGB/DVI)
1
RGB (PC/DTV)
ANT OUT
S-VIDEO
ANT IN
OUTPUT
SWITCH
2
VIDEO
L
R
Wall Jack
Antenna
CONNECTIONS & SETUP
ANTENNA
IN
1. How to connect
1
Connect the RF antenna out socket of the VCR to the A n t e n n a socket on the set.
2
Connect the antenna cable to the RF antenna in socket of the VCR.
2. How to use
■
Match the appropriate programme between the TV and VCR for viewing.
■
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
23
CONNECTIONS & SETUP
When connecting with an RCA cable
VIDEO
1. How to connect
1
L
R
(
VIDEO
S-VIDEO
ANT IN
OUTPUT
SWITCH
ANT OUT
)
AUDIO
AV IN 1
VIDEO jacks between TV and
Connect the AUDIO/V
VCR. Match the jack colors(Video = yellow, Audio Left =
white, and Audio Right = red)
1
AV OUT
2. How to use
■
CONNECTIONS & SETUP
■
■
Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
Select A V 1 input source using the I N P U T button on the
remote control.
If connected to A V I N 2, select A V 2 input source.
(MONO)
VIDEO
! NOTE
G
If you have a mono VCR, connect the audio cable from the
VCR to the A U D I O
L ( M O N O ) jack of the set.
ANTENNA
IN
1. How to connect
2
Connect the S-VIDEO output of the VCR to the S-VIDEO
input on the set. The picture quality is improved; com
pared to normal composite (RCA cable) input.
VIDEO
■
AUDIO
ANT OUT
1
S-VIDEO
VIDE
COM
CAUTION
G
Do not connect to both Video
and S-Video at the same time. In
the event that you connect both
Video and the S-Video cables,
(
)
only the S-Video
will work.
AUDIO
24
OUTPUT
SWITCH
AV IN 1
If connected to AV IN2, select A V 2 input source.
The picture quality is improved: ; compared to normal
composite (RCA cable) input.
ANT IN
(MONO)
Select A V 1 input source using the INPUT button on the
remote control.
! NOTE
S-VIDEO
AV OUT
Insert a video tape into the VCR and press PLAY on the VCR.
(Refer to the VCR owner’s manual.)
G
R
2
VIDEO
■
L
Connect the audio outputs of the VCR to the AUDIO
input jacks on the set.
2. How to use
■
CO
IN
When connecting with an S-Video cable
1
VID
S-VIDEO
AUDIO
AV INANTENNA
1
S-VIDEO
AV INANTENNA
1
IN
ANOTHER A/V SOURCE SETUP
The TV has a special signal output capability which allows you to hook up a second TV or monitor.
1. How to connect
1
Connect the second TV or monitor to the
TV’s AV OUT jacks.
2
See the Operating Manual of the second TV or monitor
for further details regarding that device’s input settings.
VIDEO
G
We recommend to use the AV OUT jacks for VCR recording.
S-VIDEO
AV OUT
(MONO)
VIDEO
AUDIO
S-VIDEO
AV IN 1
CONNECTIONS & SETUP
Component1-2, RGB-PC/RGB-DTV, HDMI/DVI, DTV input
sources cannot be used for AV out.
R
1
! NOTE
G
L
ANTENNA
IN
25
CONNECTIONS & SETUP
DIGITAL AUDIO OUTPUT
Send the TV’s audio to external audio equipment via the Digital Audio Output (Optical) port.
1. How to connect
1
2
Connect one end of an optical cable to the TV Digital
Audio (Optical) Output port.
Connect the other end of the optical cable to the digital audio (optical) input on the audio equipment.
HDMI IN
RS-232C IN
DIGITAL AUDIO
(CONTROL & SERVICE)
OUT
OPTICAL
PTICAL
2
1 (DVI)
CONNECTIONS & SETUP
3
Set the “TV Speaker option - Off” in the AUDIO
menu. (G p.86). See the external audio equipment
instruction manual for operation.
! NOTE
G
When connecting with external audio equipment, such
as amplifers or speakers, please turn the TV speakers
off. (G p.86)
CAUTION
G
26
1
Do not look into the optical output port. Looking at the
laser beam may damage your vision.
2
EXTERNAL A/V SOURCE SETUP
Camcorder
1. How to connect
1
Video Game Set
VIDEO jacks between TV and
Connect the AUDIO/V
external equipment. Match the jack colors.(Video = yellow,
Audio Left = white, and Audio Right = red)
VIDEO
L
R
2. How to use
■
Operate the corresponding external equipment.
AUDIO R S-VIDEO
If connected to AV IN2 input, select A V 2 input source.
L/MONO
■
AV IN 2
i.e)50PB2DR
1
CONNECTIONS & SETUP
Select A V 1 input source using the INPUT button on the
remote control.
VIDEO
■
27
CONNECTIONS & SETUP
ANTENNA
OUT
ANTENNA
IN
DVD SETUP
When connecting Component cables
1. How to connect
1
CONNECTIONS & SETUP
2
Connect the video outputs (Y, PB, PR) of the DVD to the
C O M P O N E N T I N V I D E O 1 jacks on the set.
Match the jack colors (Y = green, PB = blue, and PR = red).
Y
Connect the audio outputs of the DVD to the C O M P ON E N T I N A U D I O 1 jacks on the set.
PB
PR
L
1
2
2. How to use
■
■
■
■
Turn on the DVD player, insert a DVD.
Select C o m p o n e n t 1 input source using the INPUT button on the remote control.
O
S-VIDEO
VIDEO
Refer to the DVD player's manual for operating instructions.
ANTENNA
OUT
To get better picture quality, connect a DVD player to the componentANTENNA
input
ports as shown below.
IN
Component ports on the TV
Video output ports
on DVD player
Y
PB
PR
Y
Pb
Pr
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
AUDIO
COMPONENT IN
If connected to C O M P O N E N T I N 2 input, select
C o m p o n e n t 2 input source.
Component Input ports
28
R
When connecting with an S-Video cable
AUDIO
1. How to connect
1
Connect the S-VIDEO output of the DVD to the
S-VIDEO input on the set.
2
Connect the audio outputs of the DVD to the AUDIO
input jacks on the set.
L
R
2
S-VIDEO
1
AV OUT
2. How to use
Turn on the DVD player, insert a DVD.
(MONO)
VIDEO
■
■
■
Select A V 1 input source using the I N P U T button on the
remote control.
AUDIO
S-VIDEO
AV IN 1
If connected to A V I N 2, select A V 2 input source.
Refer to the DVD player's manual for operating instructions.
When connecting HDMI cable
ANTENNA
OUT
1. How to connect
1
Connect the HDMI output of the DVD to the
H D M I I N jack on the set.
2
No separate audio connection is necessary.
CONNECTIONS & SETUP
■
ANTENNA
IN
RS-2
DIGITAL AUDIO
(CONTRO
OUT
HDMI IN
OPTICAL
2
2. How to use
■
■
1 (DVI)
Select H D M I 1 / D V I or H D M I 2 input source with using
the INPUT button on the remote control.
Refer to the DVD player's manual for operating instructions.
1
! NOTE
G
If the DVD supports Auto HDMI function, the DVD output
resolution will be automatically set to 1280x720p.
G
If the DVD does not support Auto HDMI, you need to set
the output resolution appropriately.
To get the best picture quality, adjust the output resolution
of the DVD to 1280x720p.
ANTENNA
OUT
HDMI-DVD OUTPUT
29
CONNECTIONS & SETUP
PC SETUP
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
The TV perceives 640x480, 60Hz as DTV 480p based on the PC graphic card. If necessary, change the
screen scanning rate for the graphic card accordingly.
When connecting D-sub 15pin cable
1. How to connect
1
Connect the RGB output of the PC to the R G B
(PC/DTV) jack on the set.
RGB IN
CONNECTIONS & SETUP
AUDIO (RGB/DVI)
2
Connect the PC audio output to the AUDIO
(RGB/DVI) jack on the set.
ANTENNA
ENNA
IN
N
RGB (PC/DTV)
2. How to use
■
■
■
Turn on the PC and the set.
Select RGB-PC input source in main input option of SETUP
menu.(G p.69)
2
1
Once you select RGB-PC in main input option of Special
menu, INPUT button is also available for this purpose.
! NOTE
G
30
Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or
brightness in PC mode. If noise is present, change the PC
output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the
VIDEO menu until the picture is clear. If the refresh rate of
the PC graphic card can not be changed, change the PC
graphic card or consult the manufacturer of the PC
graphic card.
AUDIO
RGB OUTPUT
REMOTE
CONTROL IN
When connecting HDMI to DVI cable
RGB IN
HDMI IN
REMOTE
CONTROL IN
RS-232C IN
DIGITAL AUDIO
(CONTROL & SERVICE)
OUT
AUDIO (RGB/DVI)
OPTICAL
ANTENNA
IN
2
RGB (PC/DTV)
1 (DVI)
2
DVI-PC OUTPUT
AUDIO
CONNECTIONS & SETUP
1
1. How to connect
1
Connect the DVI output of the PC to the H D M I I N 1 ( D V I ) jack on the set.
2
Connect the PC audio output to the AUDIO (RGB/DVI) jack on the set.
2. How to use
■
Turn on the PC and the set
■
Select H D M I 1 / D V I input source using the INPUT button on the remote control.
! NOTE
G
If the PC has a DVI output and no HDMI output, a separated audio connection is necessary.
31
CONNECTIONS & SETUP
! NOTES
G
G
To get the best picture quality, adjust the HDMI
to 1920x1080, 60Hz (42/47LB2DE only).
To get the the best picture quality, adjust the PC
graphics card to 1024x768, 60Hz.
CONNECTIONS & SETUP
G
Depending on the graphics card, DOS mode may
not work if a HDMI to DVI Cable is in use.
G
When Source Devices are connected with
HDMI/DVI Input, the output PC Resolution(VGA,
SVGA, XGA), Position and Size may not fit on the
Screen. As shown in the picture below, press the
ADJUST button to adjust the screen Position of
the TV SET and contact a PC graphics card service center.
When Source Devices connected with HDMI/DVI
Input, output TV SET Resolution (480p, 576p,
720p, 1080i) and TV SET Display fit EIA/CEA861-B Specification to Screen. If not, refer to the
Manual of HDMI/DVI Source Devices or contact
your service center.
G
Supported Display Specifications (RGB/HDMI-PC )
G
G
G
If the HDMI/DVI Source Device is not connected
to the Cable or if there is a poor cable connection, "No signal" is displayed in the HDMI/DVI
Input. In this case, that Video Resolution is not
supported. If "Invalid Format" is displayed, refer to
the Source Device manual or contact your service
center.
Avoid keeping a fixed image on the screen for a
long period of time. The fixed image may become
permanently imprinted on the screen.
The synchronization input form for Horizontal
and Vertical frequencies is separate.
If you select HDMI/DVI, HDMI2 input source in
main input option of SETUP menu and set HDMIPC 1920 x 1080 in your PC format, you can get
best picture quality with matching 1:1pixel
(42/47LB2DE only).
Supported Display Specifications (RGB/HDMI-DTV)
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
640x350
31.468
70.09
720x576
31.25
50.00
640x480
31.469
37.861
37.500
59.94
72.80
75.00
720x480
31.47
31.50
59.94
60.00
720x400
31.46
70.08
1280x720
37.50
44.96
45.00
50.00
59.94
60.00
1920x1080i
28.125
33.72
33.75
50.00
59.94
60.00
27.00
33.75
56.25
67.50
24.00
30.00
50.00
60.00
800x600
1024x768
35.156
37.879
48.077
46.875
56.25
60.31
72.18
75.00
48.363
56.476
60.023
60.00
70.06
75.02
1280x768
47.776
59.870
1360x768
47.720
59.799
1366x768
47.130
59.65
1920x1080
(42/47LB2DE only)
1920x1080p
(42/47LB2DE only)
* HDMI-DTV mode only: 1920x1080p(42/47LB2DE only)
67.500
60.00
* RGB-PC mode only: 640x350, 720x400
* HDMI-PC mode only: 1920x1080(42/47LB2DE only)
32
G
Screen Setup for External Input Mode
Overview
When Component, RGB or HDMI/DVI are selected in Main Input, the
following restrictions apply.
In HDMI/DVI-PC and HDMI/DVI-DTV mode, only P o s i t i o n is available.
In Component and RGB-DTV mode, C l o c k is not available.
After connecting RGB-PC to PC input and checking the screen quality.
When you change the resolution, select the proper resolution in present
input to see the best picture appearance.
8
9
LIST
0
FAV
SIZE
INDEX
TIME
REVEAL
I/II
APM
SLEEP
ADJUST
?
Resolution G
1280 x 768
1360 x 768
Position
1366 x 768
Clock
Phase
1
Press the ADJUST button and then use D or E button to
select Resolution, Position, Clock, or Phase.
Reset
Close
2
3
Press the O K button and then use D / E or F
button to make appropriate adjustments.
■ The P h a s e adjustment range is -32 ~ +32.
■ The C l o c k adjustment range is -30 ~ +30.
1
/G
Press the O K button.
Initializing (Reset to original factory values)
2
3
Resolution This function allows you select
resolution of XGA/WXGA. (Up
to 1366x768, 60Hz)
Position This function is to adjust picture to
left/right and up/down as you prefer.
Clock
This function is to minimize any vertical bars or stripes visible on the
screen background. And the horizontal screen size will also change.
Phase
This function allows you to remove
any horizontal noise and clear or
sharpen the image of characters.
CONNECTIONS & SETUP
Adjustment for screen Resolution, Position, Clock,
Phase, Reset
7
To initialize the adjusted values.
Resolution
1
Press the ADJUST button and then use D or E button to
select Reset.
2
Press the O K button and then use F or G button to
select Y e s.
3
Press the O K button.
Position
Initialize Settings
Clock
Phase
Yes
No
Reset
MENU
Prev
F G Select
1
OK
2
3
33
BASIC OPERATION
TURNING THE TV ON
INPUT
D/A
MODE
TV
POWER
INPUT
VCR
BRIGHT
ARC
Ensure the power cord is connected correctly.
When connected to power the TV switches to standby mode.
■ In standby mode, press the
, INPUT, P R + / - button
on the TV or press the POWER, INPUT, D/A INPUT, LIVE T V,
PR + / -, Number (0~9
9 ) button on the remote control.
1
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
Select the viewing source by using the INPUT button on
the remote control.
■ This TV is programmed to remember which mode it was
last set to, even if you turn the TV off.
BASIC OPERATION
When finished using the TV, press the POWER button on
the remote control. The TV reverts to standby mode.
3
PIP INPUT
LIVE TV
EXIT
MARK
OK
TIME
SHIFT
2
INFO
TIME
SHIFT
Q.VIEW
VOL
PR
MUTE
1
2
3
4
5
6
7
8
9
LIST
0
FAV
! NOTE
G
If you intend to be away on vacation, disconnect the
power plug from the wall power outlet.
INITIALIZING SETUP
If the OSD (On Screen Display) is displayed on the screen
as figure 1 after turning on the set, you can adjust the Auto
Programme tuning, Time Zone selection or Password setting.
1
Installation Guide
Welcome
The Following process guides you to
complete initial settings. This initial
setup appears the first time you
turn the TV on. The settings can be
! NOTE
G
G
34
It will automatically disappear after approx. 40 seconds
unless a button is pressed.
This OSD (On Screen Display) is displayed only once
when you purchase TV and turn it on.
changed in menu once entered.
Next
Figure 1.
PAGE
VOLUME ADJUSTMENT
OK
TIME
SHIFT
TIME
SHIFT
Q.VIEW
VOL
Adjust the volume to suit your personal preference.
1
Press the V O L + / - button to adjust the volume.
PR
PAGE
MUTE
1
2
3
4
5
6
7
8
9
LIST
0
FAV
SIZE
INDEX
TIME
REVEAL
I/II
APM
SLEEP
ADJUST
?
2
If you want to switch the sound off, press the M U T E button.
3
You can cancel the Mute function by pressing the M U T E,
I / I I or VOL + / - button.
BASIC OPERATION
PROGRAMME SELECTION
Q.VIEW
VOL
PR
PAGE
MUTE
Automatically finds all programmes available through
antenna or cable inputs, and stores them in memory on
the programme list.
1
Press the P R + / - or NUMBER buttons to select a
programme number.
1
2
3
4
5
6
7
8
9
LIST
0
FAV
SIZE
INDEX
TIME
REVEAL
I/II
APM
SLEEP
ADJUST
?
35
SPECIAL FUNCTIONS
DVR (DIGITAL VIDEO RECORDER)
TIMESHIFT
INPUT
D/A
MODE
TV
POWER
INPUT
VCR
BRIGHT
ARC
This function allows the unit to automatically record live
TV and make it available for reviewing at any time.
With Timeshift turned on, you may pause and rewind normal TV viewing at any time without missing any of the live
broadcast.
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
INFO
PIP INPUT
LIVE TV
EXIT
MARK
OK
TIME
SHIFT
TIME
SHIFT
Manual record
1
SPECIAL FUNCTIONS / DVR (DIGITAL VIDEO RECORDER)
36
Press the M E N U button and then use D or E button
to select the D V R menu.
Schedule list
Recorded TV
Timeshift mode
HDD format
Record quality
2
Press the G button and then use D or E button to
select the Timeshift mode.
1
3
Press the G button and then use D or E button to
select O n or O f f.
Manual record
Schedule list
Recorded TV
4
Press E X I T button to return to normal TV viewing.
Timeshift mode
HDD format
G
Off
On
Record quality
2
3
Using the Timeshift function
1
1
2
4
3
After selecting the Timeshift Mode On, press the O K button.
The ‘Progress Bar’?
This function indicates a possible DVR reshowing
section, a current on-screen and real on-broadcasting position, a section of section-recording.
As soon as Timeshift starts, a progress bar indicating the
current recording status is displayed in the bottom of the
screen.
■ Press the E X I T button to hide the ‘Progress Bar’ or press
the O K button to display the 'Progress Bar'.
■ This function is preserved even change a programme on
progressing the Timeshift.
■
2 Current save time.
3 30 minute intervals from Timeshift start time.
(Total - 2 hours).
4 Indicates current Timeshift position.
When finished with the Timeshift function, enter the
option menu and turn Timeshift Mode O f f.
! NOTE
G
DVR (Digital Video Recorder) : A device which
records and plays broadcast program contents
onto a hard disk in TV or SET TOP BOX.
G
If available hard-disk space is low when Timeshift
is initiated, the oldest information is deleted.
G
In order to save hard-disk space, nothing is saved
when there is no signal.
G
The total storage space of the hard-disk is
250GB(42LC2DR/50PB2DR), 160GB(42/47LB2DE).
10GB minimum is reserved for Timeshift.
G
When turning power on, it may take up to 3 minutes to initialize the HDD.
G
Because an analog broadcast is transfered to a
digital signal, video that contains rapid movement
may show "cross stripes". This happens when the
analog signal is compressed and then restored in
the digital signal. The unit will attempt to reduce
this excessive picture noise.
G
When using the PIP/POP mode, Timeshift is
stopped.
G
Timeshift is available in AV1-2, Antenna,
Component1-2 mode.
G
Timeshift is not available for Audio only programmes.
G
In 42/47LB2DE models, when the set is connected to 1080p external equipment, Timeshift is
stopped.
SPECIAL FUNCTIONS / DVR (DIGITAL VIDEO RECORDER)
2
1 Status of current displayed video.
37
SPECIAL FUNCTIONS
DVR (DIGITAL VIDEO RECORDER)
Using the Timeshift function, play
INPUT
D/A
When using Timeshift, there are diverse playback options.
MODE
TV
POWER
INPUT
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
INFO
PIP INPUT
Indicates that the current broadcast and displayed video differ.
MENU
LIVE TV
EXIT
Forth and Back
+/- Directly View
Stop
Play
Frame by
Frame
Pause
MARK
Slow
Motion
OK
Using the remote control
You can shift playback to any point within the recorded program.
SPECIAL FUNCTIONS / DVR (DIGITAL VIDEO RECORDER)
When playing, press the R E W (
->
->
) button.
■
Press
■
Pressing these buttons repeatedly increases the fast forward/reverse speed.
to speed up.
Press the
or
button to move back and forth within the current program.
■ Press the
button to jump about 30 seconds forward.
■ Pressing the
button to jump about 8 seconds backward.
) button.
During playback, press the Pause(
■ Still screen is displayed.
■ Repetedly press the P a u s e (
) button to advance frame by frame.
■ Press the P a u s e (
) button and then the F F (
) button for slow motion
(as indicated by
.)
■
When using the F or G button during playback the cursor can be viewed on
the screen.
Press the PLAY(
LIVE TV
38
->
) or FF(
) button to return to normal playback.
If you want to return to the last selected input mode, press the L I V E T V button.
RECORDING
Use this function to record the program you are watching on the main screen
(Analogue or Digital broadcast.)
Instant Record
This function records the currently displayed programme.
1
Select the desired programme to record and then press the button.
During recording
is displayed. Use this feature to record up to 2
hours of programming.
2
If you want to stop recording, press the
stop.
button. And then recording will
3
You can add/subtract recording time by pressing the
button while recording. Press the F or G button repeatedly to add/subtract to the recording
time. Each time you press F or G button the recording duration changes as
shown below.
+ 10 m i n -> + 2 0 m i n -> + 3 0 m i n -> + 4 0 m i n -> + 5 0 m i n -> + 1 h r
No Change
- 10 m i n -> - 2 0 m i n -> - 3 0 m i n -> - 4 0 m i n -> - 5 0 m i n -> - 1 h r
SPECIAL FUNCTIONS / DVR (DIGITAL VIDEO RECORDER)
While recording, if you press the
button before 10
seconds of recording time has passed, this message is
displayed.
■ If you press the
button after more than 10 seconds
of recording time has passed, this message is displayed.
■
39
SPECIAL FUNCTIONS
DVR (DIGITAL VIDEO RECORDER)
The extra recording time added to the existing setting
equals the final recording time.
After adjusting the recording time, select O K. Press the O K
button to check the adjusted recording time. The progress
bar will be displayed.
4
3
Total recording duration
Elapsed recording time
SPECIAL FUNCTIONS / DVR (DIGITAL VIDEO RECORDER)
40
Recording stops when the selected duration is reached or
when you press the
button.
Note: Although recording has stopped, the Timeshift feature remains active.
5
! NOTE
G
When recording, if the available storage space
becomes low, the recording will be automatically
stopped.
G
Recordings of less than 10 seconds will not be
saved.
G
To save disk space while recording analog or di-
G
If you press Record while watching a broadcast
(with content-protected program) using the
Timeshift function, recording begins from that
point.
gital broadcasts, no data is saved if there is no
signal.
G
The recording function will not initiate for a
copy-protected program.
G
The displayed time differs slightly from the actual
time.
G
In no signal or film source, the displayed time
slightly differ from the actual time.
The recording can not be used with content-protected programs on progressing Timeshift.
G
If you record for a long time, in a state of the
Analogue signal is weak, remained recording time
may be short.
Watching & Record
While recording, you can change programmes or inputs without
disturbing the recording.
After starting an Instant Record or Reserved Record,
change the programme or input.
1
■
When changing to the programme being recorded in
Watch & Record, the screen is changed to Instant Record
state or Reserved Record state.
G
When a digital broadcast is being recorded, another
digital broadcast cannot be watched.
G
When a component input source is being recorded,
another programme or source cannot be watched.
CAUTION
G
if you turn the power off while recording, the message
shown below is displayed.
Timer recording in progress.
Do you want to record after tuning off?
G
If you select Yes, recording continues and the power is
turned off.
G
If you select No, recording stops and then power is turned
off.
SPECIAL FUNCTIONS / DVR (DIGITAL VIDEO RECORDER)
! NOTE
41
SPECIAL FUNCTIONS
DVR (DIGITAL VIDEO RECORDER)
MANUAL RECORDING
INPUT
D/A
MODE
TV
POWER
INPUT
VCR
BRIGHT
This function is used to perform reserved recording.
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
INFO
PIP INPUT
LIVE TV
EXIT
MARK
OK
1
SPECIAL FUNCTIONS / DVR (DIGITAL VIDEO RECORDER)
42
2
Press the
button to display H O M E menu. Use the
D or E button to select the Manual Rec and then use the
O K or G button.
Manual Rec screen is displayed as shown below.
Use the D E F G buttons to set the Input, Programme,
D a t e, Start Time, End Time, Frequency.
G
I n p u t : Select the input source from the available options
(Digital, Analogue, AV1-2, Component1-2).
G
P r o g r a m m e : Select either the current programme or a
scanned programme.
G
D a t e : You can select a date up to one month in the
future. The max duration is 8 hours.
G
S t a r t T i m e / E n d T i m e : Ensure you have set AM or PM
correctly.
G
F r e q u e n c y : Choose either Once, Daily, Weekly, Weekday,
Weekend.
3
After setting the Manual Rec , press the O K button.
1
2
RECORDED TV
INPUT
D/A
MODE
TV
POWER
INPUT
1
VCR
BRIGHT
You can view the recorded program list at a glance.
ARC
Press the
button to display H O M E menu.
Use the D or E button to select the Recorded TV and then
use the O K or G button.
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
INFO
PIP INPUT
LIVE TV
EXIT
MARK
OK
Q.VIEW
VOL
3
1
Usable HDD
1
2
3
4
5
Folder List
Current page/Total pages
Marked thumbnail photo
number
Direct Buttons
2
4
PAGE
SPECIAL FUNCTIONS / DVR (DIGITAL VIDEO RECORDER)
Screen Components
PR
5
43
SPECIAL FUNCTIONS
DVR (DIGITAL VIDEO RECORDER)
Recorded programme Selection and PopUp Menu
The thumbnail recorded list is shown above.
1
Use the PR +/- button for page up/down navigation.
2
Use the
button to move or delete from the list. A
is
displayed next to the thumbnail photo if an item is marked.
3
Use D E F G buttons to navigate the appropriate thumbnail photo, then press the O K button to open the pop-up
menu.
MARK
G
Play : Begin playback of selected recorded program.
SPECIAL FUNCTIONS / DVR (DIGITAL VIDEO RECORDER)
G Mark All : mark all recorded programmes on the current
folder.
G
1
2
Unmark All : Change marked recorded programmes to
unmarked recorded programmes.
G M o v e : Move recorded programme saved in HDD to a
different folder.
4
G
Delete : Delete the selected recorded programs.
G
Rename : Edit recorded programme title.
G
Cancel : Close the Pop-up menu.
Press E X I T button to return to TV viewing or press
button to return to the H O M E menu.
■
■
If the HDD has a problem performing a function
(Recording) related to the DVR, select Y e s or N o to initialize HDD.
If you select Y e s, the Recorded List (Recording) will be
deleted. If you select N o, the DVR may not function properly.
3
If the temperature is below zero (0°C), a warning message
is displayed to protect the HDD from error and the DVR
from incorrect operation.
4
44
Folder List
Select a desired folder in the folder list and then press the O K
button to view the detailed menu.
G
Create: Create new folder.
G
Delete: Delete folder (except ‘My TV’).
G
Rename: Edit folder name (except ‘MyTV’).
Use the D
E F G
and O K buttons to edit folder name.
Move the cursor to OK and press the O K button to save.
G
Cancel: Close the detailed menu.
Blocks any recorded programmes that you do not want to
watch or that you do not want another person to watch.
1
Use D E
gramme.
2
Press the BLUE button to block or unblock it.
F G
buttons to select the desired recorded pro-
! NOTE
G
If you change your password, change the password
in Set pasword option of LOCK menu.
SPECIAL FUNCTIONS / DVR (DIGITAL VIDEO RECORDER)
Block/Unblock for the recorded programme
45
SPECIAL FUNCTIONS
DVR (DIGITAL VIDEO RECORDER)
Playing recorded programs
You can play the selected program in the recorded program list.
The ‘Progress Bar’?
1
Play a recorded program.
2
While playing, You can see a diversified playback screen as shown below.
At first, an icon showing current playback mode is displayed as marking
. Then press the O K button to display the progress bar.
■ To stop displaying the recorded programs icon, press the E X I T button.
■
1
2
3
4
5
This function indicates a possible DVR
reshowing section, a current on-screen
and real on-broadcasting position, a
section of section-recording.
1 Indicates movement of recorded
program.
2 Indicates status of recorded program.
3 Indicates elasped playback time.
4 Indicates total playback time.
5 Indicates a quarter of program runtime.
6 Indicates current playback position.
6
Using the remote control
You can shift playback to any point within the recorded program.
SPECIAL FUNCTIONS / DVR (DIGITAL VIDEO RECORDER)
When playing, press the R E W (
Press
■
Pressing these buttons repeatedly increases the fast forward/reverse speed.
■
■
or
->
to speed up.
button to move back and forth within the current program.
Press the
button to jump about 30 seconds forward.
Pressing the button to jump about 8 seconds backward.
) button.
During playback, press the Pause (
■ Still screen is displayed.
■ Repetedly press the P a u s e (
) button to advance frame by frame.
■ Press the P a u s e (
) button and then the F F (
) button for slow motion
(as indicated by
).
After using G to rewind while playing, press the F button to return to the prior
screen.
Press the PLAY(
LIVE TV
) button to return to a normal playback.
When playing the recorded program: Return to the last selected input source.
When delaying: Return to the last selected input source.
If you press the STOP(
46
->
) button.
■
Press the
->
) or F F (
) button, you can watch TV.
Editing a section
You can save the desired screen in the recorded program list after editing the
recorded program.
1
2
At the point you wish to start editing, press the button.
■ The progress bar will show the edited section as red.
■ It is possible to search (
or
), and pause while editing the section.
When you wish to stop, press the
Stop editing the section.
button.
■
If you repeat steps 1,2, it is possible to edit more programs.
4
If you press the
button to stop the recorded program playback, this
message is displayed as shown below.
G
Save : Save contents of the edited
section and finish the playback of
the recorded program.
G
Undo : Don't save contents of the edited section and finish the
playback of the recorded program.
G
Cancel : The screen returns to playback.
! NOTE
G
It is possible to play the recording / reserved
recording.
G
You may hear noise from the hard-disk during
playback of the recorded program. This is normal
and does not indicate a problem.
G
When saving the content of the edited section,
delete the portion not selected.
G
When power fails during editing, the program may
)
not be saved or edited. Press the S T O P (
button after checking the recording list.
G
You can edit up to 10 sections.
G
You must select at least 10 seconds for the edited portion to be saved.
SPECIAL FUNCTIONS / DVR (DIGITAL VIDEO RECORDER)
3
47
SPECIAL FUNCTIONS
DVR (DIGITAL VIDEO RECORDER)
On playing the recorded programme, repeat a section
You can set the recording to repeat the same section.
At the point you wish to start, press the
1
■
The following symbol will appear:
MARK
button.
.
MARK
SPECIAL FUNCTIONS / DVR (DIGITAL VIDEO RECORDER)
48
2
At the point you wish to finish, press the
button.
■ The following symbol appears:
.
■ Repeatedly play the marked section.
■ You can not make sections of less than 5 seconds.
■ The progress bar for the repeated section will be shown in blue.
3
Press the
MARK
button to stop playing the repeat section.
! NOTE
G
It is possible to search using (
/
).
Pause to edit a section while repeating.
G
When the progress bar is out of the repeat section using the F or
button, the repeat section playing will be stop.
G
SCHEDULED
This function is available to use in DVR menu.
1
Schedule screen is displayed as shown.
Use D or E button to select recorded programme.
Recorded programme Selection and PopUp Menu
1
Use D or E button to select the recorded programme you want.
2
Press the O K button to open the pop-up menu.
3
G
Modify : Modify the schedule of the recorded program
selection.
G
Delete : Delete the recorded program.
G
Delete All : Delete all recorded programs.
Press E X I T button to return to TV viewing or press
to return to the H O M E menu.
1
button
SPECIAL FUNCTIONS / DVR (DIGITAL VIDEO RECORDER)
2
Press the
button to display H O M E menu.
Use the D or E button to select the Schedule and then use
the O K or G button.
49
SPECIAL FUNCTIONS
DVR (DIGITAL VIDEO RECORDER)
HDD FORMAT
INPUT
D/A
MODE
TV
POWER
INPUT
VCR
BRIGHT
Erases all programs and initializes the hard drive.
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
PIP INPUT
LIVE TV
EXIT
TIME
SHIFT
INFO
MARK
OK
TIME
SHIFT
Manual record
1
Press the M E N U button and then use
to select the D V R menu.
D
or E button
Schedule list
Recorded TV
Timeshift mode
HDD format
Record quality
SPECIAL FUNCTIONS / DVR (DIGITAL VIDEO RECORDER)
50
2
Press the G button and then use D or E button to
select HDD Format.
1
3
Press the O K or G button.
Select Y e s or N o to format HDD as shown below.
Manual record
Schedule list
Do you want to format HDD?
‘Yes’ will delete all recorded programmes.
Recorded TV
Timeshift mode
HDD format
Record quality
G
Selection ( G or
) leads you
to delete all programmes from
list and initialize HDD.
- If you select Y e s , the Recorded List (Recording) will
be deleted. Even if you select N o , the DVR may not
function if there are problems with the hard drive.
4
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
2
3
RECORD QUALITY
INPUT
D/A
MODE
TV
POWER
INPUT
VCR
BRIGHT
This function is available on Manual record.
In Analogue, AV1-2, Component 1-2 mode, this function is
also available.
The record quality always works best on Timeshift and
Instant record.
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
INFO
PIP INPUT
LIVE TV
EXIT
MARK
OK
TIME
SHIFT
TIME
SHIFT
Manual record
1
Press the M E N U button and then use
to select the D V R menu.
D
or E button
Schedule list
Recorded TV
Timeshift mode
HDD format
Record quality
1
3
Press the G button and then use D or E button to
select B e s t, H i g h or Basic.
Manual record
Schedule list
Recorded TV
4
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
Only for manual record and
analogue source (analogue
broadcast AV1, AV2,
Component1, Component2)
Timeshift mode
HDD format
Record quality
G
Best
High
Basic
2
3
SPECIAL FUNCTIONS / DVR (DIGITAL VIDEO RECORDER)
2
Press the G button and then use D or E button to
select Record quality.
51
SPECIAL FUNCTIONS PIP / POP / Twin Picture
INPUT
D/A
PIP lets you view 2 different inputs (sources) on your TV screen
at the same time. One source will be large and the other source
will be shown in a smaller inset image.
Twin Picture mode splits the screen into two images, allowing
two picture sources to be shown on the TV screen at the same
time. Each source is given half the screen.
MODE
TV
POWER
INPUT
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
INFO
PIP INPUT
LIVE TV
EXIT
TIME
SHIFT
MARK
OK
Watching PIP/POP/Twin Picture
Press the P I P button to access the sub picture.
Each press of PIP changes the PIP options as shown below.
PR 2
SPECIAL FUNCTIONS / PIP / POP / TWIN PICTURE
PR 3
PR 4
PIP Mode
POP Mode
PIP Off
Twin picture Mode
! NOTE
G
G
52
When the sub picture size is 1/2 of the main picture, the picture quality may deteriorate.
The motion of the sub picture can be unnatural because the set displays full screen by synchronizing
the main picture source when the refresh rate between the main picture source and the sub picture
source is different in PIP mode.
TIME
SHIFT
Selecting an Input Signal Source for PIP/Twin Picture
Use the P I P I N P U T button to select the input source for the sub picture. Each press of PIP INPUT changes the
PIP source.
Main Picture Source
Available Sub Picture Sources
Digital
Analogue, AV1, and AV2
Analogue
Analogue, Digital, AV1, and AV2
AV1-2, Component1-2, RGB, HDMI/DVI
Digital, Analogue, AV1-2
TV Program selection for PIP
1
Select the Digital or Analogue option on the Sub input menu or with the
PIP INPUT button. Use the PIP PR+ / PIP PR- button to select a programme
for the sub picture.
Moving the PIP sub picture
1
In PIP mode, press the D E F G buttons to move the sub
picture to a different location on the screen.
SPECIAL FUNCTIONS / PIP / POP / TWIN PICTURE
2
Press the P I P button.
53
SPECIAL FUNCTIONS
PIP / POP / Twin Picture
Swapping the PIP/Twin Picture
1
Repeatedly, use the S W A P button to switch the main and sub pictures.
■
When the main picture is in Digital, Analogue or AV modes, swapping is available.
SWAP
PIP
Main Picture
SPECIAL FUNCTIONS / PIP / POP / TWIN PICTURE
SWAP
Twin
Picture
Main Picture
Sub Picture
Adjusting Main and Sub Picture Sizes for Twin Picture
1
Use the D E F G buttons to change main and sub picture
sizes in Twin Picture mode.
■
54
Sub Picture
If the screen is adjusted to the maximal size, the large
screen is filled with entire program vertically as shown.
POP (Picture-out-of-Picture : Programme Scan)
Use POP to search the programs of all the memorized programmes
one-by-one on the 3 PIP screen display, (while the main picture
source remains the current programme). The pictures of all the
programmed programmes are searched with the 3 POP screens.
PR 2
Press the P I P button to activate the POP mode while in P I P
mode.
1
P r o g r a m m e s e l e c t i o n : Use F button to enlarge the
selected programme being searched on the PIP screen to
shift it for viewing on the Main screen.
■ P I P s e l e c t i o n : Use D or E button to select one of 3
PIP screen pictures in P O P mode.
■ When watching Analogue TV on Main picture, Digital TV
channels are scanned as the Sub pictures. However, when
watching Digital TV on Main picture, only Analogue TV
channels are scanned as the Sub picture.
PR 3
■
! NOTE
G
Run Auto programme before using POP mode.
SPECIAL FUNCTIONS / PIP / POP / TWIN PICTURE
Press the E X I T button to cancel POP mode.
2
PR 4
55
SPECIAL FUNCTIONS TELETEXT
* This feature is not available in all countries.
- Teletext is a free service broadcast by some TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics.
- The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext)
consists of a number of pages which are selected by directly entering the corresponding page number. TOP and
FASTEXT are more modern methods allowing quick and easy selection of teletext information.
Switch On/Off
Press the T E X T button to switch to teletext. The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the T E X T or E X I T button to switch off teletext.
SIMPLE Text
* This feature is not available in all countries.
■
Page selection
SPECIAL FUNCTIONS / TELETEXT
1
2
Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you
press a wrong number, you must complete the three digit number and then re-enter the correct page
number.
The P R +/-- button can be used to select the preceding or following page.
TOP Text
* This feature is not available in all countries.
- The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field
denotes the next group and the blue field indicates the next block.
A Block / group / page selection
1
With the B L U E button you can progress from block to block.
2
Use the yellow button to proceed to the next group with automatic overflow to the next block.
3
With the G R E E N button you can proceed to the next existing page with automatic overflow to the next group.
Alternatively the P R + button can be used.
4
The red button permits to return to previous selection. Alternatively the P R - button can be used.
A Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page by entering it as a three digit number using
the NUMBER buttons in TOP mode.
56
FASTEXT
- The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button.
A
Page selection
1. Press the i button to select the index page.
2. You can select the pages which are colour coded along the bottom line with the same coloured buttons.
3. Corresponding to the SIMPLE teletext mode, you can select a page by entering its three digit page number
with the NUMBER buttons in FASTEXT mode.
4. The P R +/-- button can be used to select the preceding or following page.
Special Teletext Functions
?
SIZE
Selects double height text.
Press this button to enlarge the top half of the
page.
Press this button again to enlarge the bottom
half of the page.
Press this button again to return to the normal
display.
TIME
a. When viewing a TV programme, press this
button to display the time at the top right
hand corner of the screen. Press this button
again to remove the display.
b. In the teletext mode, press this button to
select a sub page number. The sub page
number is displayed at the bottom of the
screen. To hold or change the sub page,
press the R E D, G R E E N, or P R +/-- buttons.
Press this function again to exit.
SPECIAL FUNCTIONS / TELETEXT
REVEAL
Press this button to display concealed information, such as solutions of riddles or puzzles.
Press this button again to remove the information from the display.
57
SPECIAL FUNCTIONS EPG(ELECTRONIC PROGRAMME GUIDE)
INPUT
D/A
- In Digital Mode Only
MODE
TV
POWER
INPUT
VCR
BRIGHT
ARC
This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options.
The EPG supplies information such as programme listings, start and end times
for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these
programme details will vary, depending on the particular broadcaster).
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
INFO
PIP INPUT
LIVE TV
EXIT
TIME
SHIFT
MARK
TIME
SHIFT
OK
This function can be used only when the EPG information is broadcast by
broadcasting companies.
Switch on/off EPG
SPECIAL FUNCTIONS / EPG
Press the G U I D E button to switch on EPG.
Press the G U I D E or E X I T button again to switch off EPG and
return to TV viewing.
Programme Guide
The Bold And The Beautiful
11 TEN Digital 4:30PM~4:59PM
Mon 15 Dec 4:59PM
The story of the glamerous ferrester family: ther loves,tragedies, triumphs
and struggles for power in the fashion industry.
TV
NOW
NEXT
11 TEN Digital
The Bold And The Beauti...
TEN News
12 TEN HD
The Bold And The Beauti...
TEN News
13 TEN Digital 1
No Information
No Information
14 TEN Digital 2
No Information
No Information
15 TEN Digital 3
No Information
No Information
16 TEN Digital 4
No Information
No Information
Pr.Change
Radio
More Info
Select a programme
Press the D E F G buttons to select desired programme, then
press the O K button to display the selected programme.
Programme Guide
TEN News
11 TEN Digital 4:30PM~4:59PM
Mon 15 Dec 4:59PM
RON WILSON and JESSICA ROWE present a comprehensive coverage of local,
national and overseas news. Includes sport and the latest weather with TIM
BAILEY.
CC Subtitle
i
Remote Control Buttons Function
RED
Shows the TV or Radio programmes
GREEN
The detail information on or off
58
Digital
16:9 576i
Information
Back
TV MENU
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.
1
Press the M E N U button and then use D or E button to select each menu.
2
Press the G button and then use D
E F G
buttons to display the available menus.
SETUP
PICTURE
Auto programme
PSM
Manual programme
Colour temperature
Programme edit
XD
Signal strength
Advanced
Main input
Video preset
Sub input
Aux. label
Booster
Set ID
AUDIO
Manual record
SSM
Schedule list
AVL
Recorded TV
Balance
Timeshift mode
TV Speaker
TV MENU
DVR
HDD format
Record quality
LOCK
TIME
SPECIAL
Lock system
Subtitle
Auto clock
Set password
Child lock
Manual clock
Block programme
ARC
Off time
Parental guidance
Aux. block
Demo
On time
ISM method
Sleep timer
Low power
Auto sleep
Front index
Only 50PB2DR
59
TV MENU
SETUP(PROGRAMME)
AUTO PROGRAMME TUNING
INPUT
D/A
MODE
TV
POWER
INPUT
I n D i g i t a l M o d e : It depends on the each digital programme.
I n A n a l o g u e M o d e : Up to 100 TV stations can be stored in this
set by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the P R + /
- or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
A password is required to gain access to Auto programme or Manual
programme menu if the Lock system is turned on.
If you forgot your password, press ‘7’, ‘7’, ‘7’, ‘7’ on the remote control.
In Australia, if no station name can be assigned to a station, the programme number is assigned and stored as ----- followed by a number
see ‘Assigning a station name’ section to assign the station name.
1
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
INFO
PIP INPUT
LIVE TV
EXIT
MARK
OK
TIME
SHIFT
TIME
SHIFT
Auto programme
Press the M E N U button and then D or E button to
select the SETUP menu.
Manual programme
Programme edit
Signal strength
Main input
TV MENU / SETUP ( PROGRAMME )
2
Sub input
Press the G button and then D or E button to select
A u t o p r o g r a m m e.
Aux. label
Booster
Set ID
1
3
Press the G button to select S t o r a g e f r o m.
Select the beginning programme number with the D or
button or NUMBER buttons.
Auto programme
E
Manual programme
G
Storage from
0
To start
Programme edit
Signal strength
Main input
Sub input
4
Press the G button to select T o s t a r t.
Aux. label
Booster
Set ID
5
Press the O K button to begin auto programming.
All receivable stations are stored.
To stop auto programming, press the O K button.
When auto programming is completed, the
P r o g r a m m e e d i t menu appears on the screen. See
the ‘Programme Edit’ section to edit the stored programme.
2
Auto programme
Storage from
Manual programme
To start
Programme edit
Signal strength
0
G
Processing
Auto programme...
All of service-information
will be updated.
26 %
5 channels found
Main input
Sub input
Press (OK) to start
digital programme scan.
Aux. label
Booster
Set ID
MENU Prev
Press
(OK) to start.
4
6
60
Press E X I T button to return to normal TV viewing.
3
5
MANUAL PROGRAMME TUNING
INPUT
D/A
MODE
TV
POWER
INPUT
In Digital Mode
VCR
BRIGHT
ARC
Manual programme lets you manually add a programme to
your programme list.
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
INFO
PIP INPUT
LIVE TV
EXIT
MARK
OK
TIME
SHIFT
TIME
SHIFT
Auto programme
1
Press the M E N U button and then use D or E button
to select the S E T U P menu.
Manual programme
Programme edit
Signal strength
Main input
Sub input
2
Press the G button and then use D or E button to
select M a n u a l p r o g r a m m e.
Aux. label
Booster
1
3
Press the G button and then use D or E button to
select the programme number you want to add.
Auto programme
Manual programme G
Programme edit
Signal strength
4
Press the O K button to store the programme. When
the programme number you want to add is already
added in programme list, the message “ A l r e a d y p r ogrammed channel. Do you want to update?”
will appear. If you want to keep on manual programming, select YES with using F / G button . Then,
press the O K button. Otherwise select N O.
When the programme is stored, the Programme edit
menu appears on the screen. See the ‘Programme Edit’
section to edit the stored programme.
Main input
Sub input
Booster
Set ID
2
Auto programme
Manual programme
Signal strength
Main input
5
7
Signal strength
Aux. label
Programme edit
Press E X I T button to return to normal TV viewing.
Select the digital
channel
for manual scanning
TV MENU / SETUP ( PROGRAMME )
Set ID
Sub input
Select the digital
channel
for manual scanning
D
E
7
Signal strength
Aux. label
Booster
Set ID
3
4
61
TV MENU
SETUP(PROGRAMME)
MANUAL PROGRAMME TUNING Continued
INPUT
D/A
MODE
TV
POWER
INPUT
In Analogue Mode
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
INFO
PIP INPUT
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
MENU
LIVE TV
EXIT
1
Press the M E N U button and then use D or E button
to select the SETUP menu.
2
Press the G button and then use D or E button to
select M a n u a l p r o g r a m m e.
MARK
OK
TIME
SHIFT
TIME
SHIFT
Auto programme
Manual programme
Programme edit
Signal strength
3
Press the G button to select B a n d. Press the D or E
button to select V / U H F or C a b l e as required.
Main input
Sub input
Aux. label
Booster
TV MENU / SETUP ( PROGRAMME )
Set ID
4
Press the G button to select C h a n n e l. Press the D
or E button to select the desired channel number.
1
Auto programme
5
Press the G button to select S e a r c h. Press the D or
E button to commence searching. If a station is found
the search will stop.
Manual programme G
Band
Programme edit
Channel
V/UHF
Signal strength
Search
Up/Down
Main input
Fine
Up/Down
Sub input
Name
Aux. label
Storage
1
----0
Booster
Set ID
6
If this station is the one required, press the F or G
button to select Storage. Select the desired programme number with the D or E button.
2
Auto programme
7
8
Press the O K button to store it.
To store another station, repeat steps 3 to 7.
62
Press E X I T button to return to normal TV viewing.
V/UHF G
Band
Programme edit
Channel
Signal strength
Search
Up/Down
Main input
Fine
Up/Down
Sub input
Name
Aux. label
Storage
1
----0
Booster
Set ID
Press
3
9
D
E
Manual programme
(OK) to store.
4
5
6
7
FINE TUNING - In Analogue Mode only
INPUT
D/A
MODE
TV
POWER
INPUT
VCR
BRIGHT
Normally fine tuning is only necessary if reception is poor.
The finely tuned programme will be indicated by a yellow
number during programme selection.
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
INFO
PIP INPUT
LIVE TV
EXIT
MARK
OK
TIME
SHIFT
TIME
SHIFT
Auto programme
1
Press the M E N U button and then use
to select the S E T U P menu.
D
or E button
Manual programme
Programme edit
Signal strength
Main input
Sub input
2
Press the G button and then use D or E button to
select Manual programme.
Aux. label
Booster
1
3
4
Press the G button and then F or G button to
select F i n e.
Press the D or E button to fine tune for the best
picture and sound.
Auto programme
Manual programme G
Band
Programme edit
Channel
V/UHF
Signal strength
Search
Up/Down
Main input
Fine
Up/Down
Sub input
Name
Aux. label
Storage
1
----0
Booster
Set ID
5
Press the O K button to store.
2
TV MENU / SETUP ( PROGRAMME )
Set ID
Auto programme
6
Press E X I T button to return to normal TV viewing.
Manual programme
Band
Programme edit
Channel
V/UHF
Signal strength
Search
Main input
Fine
Sub input
Name
Aux. label
Storage
1
Up/Down
D
E
Up/Down G
----0
Booster
Set ID
Press
(OK) to store.
3
4
5
63
TV MENU
SETUP(PROGRAMME)
ASSIGNING A STATION NAME - In Analogue Mode only
INPUT
D/A
MODE
TV
POWER
INPUT
VCR
BRIGHT
You can assign a station name to each programme number.
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
INFO
PIP INPUT
LIVE TV
EXIT
MARK
OK
TIME
SHIFT
1
Press the M E N U button and then use
to select the SETUP menu.
D
TIME
SHIFT
Auto programme
or E button
Manual programme
Programme edit
Signal strength
Main input
Sub input
2
Press the G button and then use
select Manual programme.
D
or E button to
Aux. label
Booster
TV MENU / SETUP ( PROGRAMME )
Set ID
1
3
4
Press the G button and then use
select N a m e.
F
or G button to
Press the D or E button. You can use the numeric 0
to 9 , the alphabet A to Z + , - , and blank.
Auto programme
Manual programme G
Band
Programme edit
Channel
V/UHF
Signal strength
Search
Up/Down
Main input
Fine
Up/Down
Sub input
Name
Aux. label
Storage
1
----0
Booster
Set ID
5
Press the F or G button to select the position and
make your choice of the second character, and so on.
2
Auto programme
6
7
Press the O K button to store.
Press E X I T button to return to normal TV viewing.
Manual programme
Band
Programme edit
Channel
V/UHF
Signal strength
Search
Main input
Fine
Sub input
Name
Aux. label
Storage
1
Up/Down
Up/Down
D
E
0
Booster
Set ID
Press
(OK) to store.
3
64
G
-----
4
5
PROGRAMME EDIT
INPUT
D/A
MODE
TV
POWER
INPUT
This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or copy blank station data into the
selected programme number.
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
PIP INPUT
LIVE TV
EXIT
TIME
SHIFT
1
INFO
MARK
OK
TIME
SHIFT
Auto programme
Press the M E N U button and then use D or E button
to select the S E T U P menu.
Manual programme
Programme edit
Signal strength
Main input
Sub input
2
Press the G button and then use D or E button to
select Programme edit..
Aux. label
Booster
1
3
Press the G button.
Auto programme
Manual programme
Programme edit
4
Deleting a programme (In Analogue Mode Only)
a. Select a programme to be deleted with the D E
F G buttons.
b. Press the R E D button twice. The selected programme is deleted, all the following programmes
are shifted up one position.
■
Copying a programme (In Analogue Mode Only)
a. Select a programme to be copied with the D E F
G buttons.
b. Press the G R E E N button.
c. Move the programme to the desired programme
number with the D E F G buttons.
d. Press the G R E E N button again to copy the programme. All the following programmes are shifted
down one position.
Signal strength
Main input
G
Selection ( Gor ) leads
you to the programme edit
screen.
Sub input
Aux. label
Booster
Set ID
2
TV MENU / SETUP ( PROGRAMME )
Set ID
■
3
4
5
65
TV MENU
SETUP(PROGRAMME)
Moving a programme (In Analogue Mode Only)
a. Select a programme to be moved with D E F G
buttons.
b. Press the Y E L L O W button.
c. Move the programme to the desired programme
number with the D E F G buttons.
d. Press the Y E L L O W button again to release this
function.
■
INPUT
D/A
INPUT
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
Skipping a programme number
a. Select a programme number to be skipped with D
E F G buttons.
b. Press the B L U E button. The skipped programme
number turns to blue.
c. Press the B L U E button again to release the
skipped programme.
When a programme number is skipped it means that
you will be unable to select it using the P R + / - button during normal TV viewing. If you want to select
the skipped programme, directly enter the programme number with the NUMBER buttons or select
it in the programme edit or table menu.
■
TV MENU / SETUP ( PROGRAMME )
Selecting Favourite Programme
a. Select your favourite programme number with D E
F G buttons and then press the F A V button. It
will automatically include the selected programme
into your favourite programmes list and a heartmark will appear in front of that programme number. You can store up to 20 programmes.
■
5
66
Repeatedly press the F A V button to select stored
favourite programmes in normal TV viewing.
MODE
TV
POWER
INFO
PIP INPUT
LIVE TV
EXIT
MARK
OK
TIME
SHIFT
TIME
SHIFT
Q.VIEW
VOL
PR
MUTE
1
2
3
4
5
6
7
8
9
LIST
0
FAV
SIZE
INDEX
TIME
REVEAL
I/II
APM
SLEEP
ADJUST
?
PAGE
CALLING UP THE CHANNEL LIST
You can check the programmes stored in the memory by
displaying the channel list.
In digital mode, the programmes shown belong to the current channel.
In analogue mode, all memorized channels are shown.
INPUT
D/A
INPUT
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
Displaying programme list
MENU
Press the L I S T button to display the channel list.
The channel list appears on the screen.
INFO
PIP INPUT
LIVE TV
EXIT
■
MODE
TV
POWER
MARK
OK
TIME
SHIFT
TIME
SHIFT
Q.VIEW
VOL
PR
PAGE
MUTE
Channel List
2
3
4
5
6
7
8
9
LIST
0
FAV
SIZE
INDEX
TIME
REVEAL
I/II
APM
SLEEP
ADJUST
?
Selecting a programme in the programme list
button in the chan-
1
Select a programme with the D
nel list.
2
The set switches to the chosen programme number.
E
TV MENU / SETUP ( PROGRAMME )
1
67
TV MENU
SETUP(PROGRAMME)
DIGITAL SIGNAL STRENGTH - In Digital Mode only
INPUT
D/A
MODE
TV
POWER
INPUT
Reveals how strong your DTV signal is and whether you
need to adjust your antenna.
The higher the signal strength, the less likely you are to
experience picture degradation.
Digital TV Signals; May not be available in all areas, nor
broadcast all programmes.
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
INFO
PIP INPUT
LIVE TV
EXIT
MARK
OK
TIME
SHIFT
1
TIME
SHIFT
Auto programme
Press the M E N U button and then use D or E button to select the S E T U P menu.
Manual programme
Programme edit
Signal strength
Main input
Sub input
2
TV MENU / SETUP ( PROGRAMME )
68
Press the G button and then use D or E button to
select S i g n a l s t r e n g t h.
Aux. label
Booster
Set ID
1
3
View the on-screen signal strength monitor to see
the strength of the signal being received.
Auto programme
Manual programme
Programme edit
Bad
Normal
Good
Signal strength
Main input
Sub input
Aux. label
Booster
Set ID
2
MAIN PICTURE SOURCE SELECTION
INPUT
D/A
MODE
TV
POWER
INPUT
Alternatively you can select the Digital, Analogue, AV1-2,
Component 1-2, RGB-PC (or RGB-DTV), HDMI1/DVI, or
HDMI2 mode by pressing the INPUT button.
Press the D/A INPUT button to select digital or analogue
mode.
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
INFO
PIP INPUT
LIVE TV
EXIT
TIME
SHIFT
1
Press the M E N U button and then use
to select the SETUP menu.
D
MARK
OK
TIME
SHIFT
Auto programme
or E button
Manual programme
Programme edit
Signal strength
Main input
Sub input
2
Press the G button and then use
select Main input.
D
or E button to
Aux. label
Booster
1
3
Press the G button and then use D or E to select
Digital, Analogue, AV 1 , AV 2 , Component 1,
Component 2, RGB-PC, RGB-DTV, HDMI1/DVI, or
HDMI2.
■ To toggle between RGB-DTV and RGB-PC, select
RGB-DTV(or RGB-PC) and press G button.
Auto programme
Manual programme
Programme edit
Signal strength
Main input
Sub input
Aux. label
Booster
4
Press E X I T button to return to normal TV viewing.
G
TV MENU /
Set ID
Digital
Analogue
AV1
AV2
Component1
Component2
RGB-PC
HDMI1/DVI
HDMI2
Set ID
2
3
Sub Picture Source Selection
Select sources for the Sub Input in the
Setup menu.
See Page 53 for selecting the input
source for the sub picture by pressing
the PIP INPUT button.
69
TV MENU
SETUP(PROGRAMME)
AUX. LABEL
Sets a label for each input source which is in use when you
press INPUT button.
1
Press the M E N U button and then use D or E button to select the SETUP menu.
Auto programme
Manual programme
Programme edit
Signal strength
Main input
2
Sub input
Press the G button and then use D or E button to
select Aux. label.
Aux. label
Booster
TV MENU /
Set ID
3
4
Press the G button and then use D or E button to
select the source: AV1, AV2, Component1,
Component2, RGB, HDMI1/DVI or HDMI2.
Press the F or G button to select the label.
1
Auto programme
Manual programme
Programme edit
AV1
Signal strength
AV2
VCR
Main input
Component1
DVD
Component2
Set Top Box
Sub input
Aux. label
5
70
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
G
RGB
Booster
HDMI1/DVI
Set ID
HDMI2
Cable Box
PC
Game
Satellite
BOOSTER - In Digital Mode only
INPUT
D/A
MODE
TV
POWER
INPUT
If the reception is poor in the fringe areas, set B o o s t e r to
O n. When the picture condition is good, do not set
B o o s t e r to O n.
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
INFO
PIP INPUT
LIVE TV
EXIT
MARK
OK
TIME
SHIFT
1
TIME
SHIFT
Auto programme
Press the M E N U button and then use D or E button to select the S E T U P menu.
Manual programme
Programme edit
Signal strength
Main input
Sub input
2
Press the G button and then use D or E button to
select B o o s t e r.
Aux. label
Booster
1
3
Press the G button and then use D or E button to
select O f f or O n.
Auto programme
Manual programme
Programme edit
Signal strength
Main input
4
Press E X I T button to return to normal TV viewing.
Sub input
Aux. label
Booster
Set ID
G
Off
On
2
3
TV MENU / SETUP ( PROGRAMME )
Set ID
71
TV MENU PICTURE ADJUSTMENT
PICTURE STATUS MEMORY (PSM)
INPUT
D/A
MODE
TV
POWER
INPUT
This function adjusts the set to the best picture appearance.
When adjusting picture options (contrast, brightness, colour,
sharpness and tint) manually, PSM is automatically changed to
User.
Picture options Dynamic, Standard, and Mild are preset and
programmed for good picture quality at the factory and cannot
be changed.
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
PIP INPUT
LIVE TV
EXIT
MARK
OK
TIME
SHIFT
1
INFO
TIME
SHIFT
PSM
Press the M E N U button and then use D or E button
to select the PICTURE menu.
Colour temperature
XD
Advanced
Video preset
2
TV MENU / PICTURE ADJUSTMENT
72
Press the G button and then use D or E button to
select P S M.
1
3
4
Press the G button and then use D or E button to
select Dynamic, Standard, M i l d, User1, or User2.
Press E X I T button to return to normal TV viewing.
PSM
G
Dynamic
Colour temperature
Standard
XD
Mild
Advanced
User1
Video preset
User2
2
3
ADAPTIVE PICTURE MODE (APM)
VOL
PR
PAGE
MUTE
Allows you to select your preferred picture mode after compairing the four different picture (Dynamic, Standard, Mild, and
User1 (or User2)) settings.
1
2
3
4
5
6
7
8
9
LIST
0
FAV
SIZE
INDEX
TIME
REVEAL
I/II
APM
SLEEP
ADJUST
?
Press the A P M button once. The screen is divided into 4
sections.
1
Use the D E F G buttons to navigate between the 4
screen sections.
By pressing the O K button, you can select the desired
mode.
2
! NOTE
G
BRIGHTNESS ADJUSTMENT
Standard
Mild
User1
F
D
G
E
Navigate
Select
EXIT
Exit
1
INPUT
D/A
POWER
INPUT
Adjust the brightness using this button on the remote control.
1
Press the
2
Adjust the desired screen brightness.
2
MODE
TV
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
INFO
PIP INPUT
TV MENU / PICTURE ADJUSTMENT
G
While in the APM mode, only the POWER, A P M, O K, E X I T, D
E F G, V O L U M E D E, M U T E buttons on the remote control are usable.
APM screen will automatically disappear after approx. 40
seconds unless a button is pressed.
Dynamic
button.
1
2
73
TV MENU
PICTURE ADJUSTMENT
MANUAL PICTURE CONTROL
(PSM-User option)
INPUT
D/A
MODE
TV
POWER
INPUT
VCR
BRIGHT
ARC
You can adjust picture Contrast, Brightness,Colour,
Sharpness, and Tint options to the levels you prefer.
In NTSC AV, Component 60Hz, RGB-DTV 60Hz,
HDMI/DVI-DTV 60Hz, RGB-PC, HDMI/DVI-PC mode, Tint
is also available.
The adjustment for PICTURE menu (Contrast, Brightness,
Colour, Sharpness, and Tint) affect both the main and sub
picture in PIP, Twin Picture, or POP mode.
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
1
D
PIP INPUT
LIVE TV
EXIT
MARK
OK
TIME
SHIFT
Press the M E N U button and then use
to select the PICTURE menu.
INFO
TIME
SHIFT
PSM
or E button
Colour temperature
XD
Advanced
Video preset
2
Press the G button and then use
select P S M.
D
or E button to
TV MENU / PICTURE ADJUSTMENT
1
3
Press the G button and then use
select User 1 or User 2.
D
or E button to
PSM
Dynamic
Colour temperature
Standard
XD
Mild
Advanced
User 1
Video preset
4
G
user 2
Press the G button and then use D or E button to
select the desired picture option (Contrast,
Brightness, Colour, Sharpness, or T i n t).
2
5
6
Press the G button and then use
make appropriate adjustments.
F
or G button to
Press E X I T button to return to normal TV viewing.
3
User1
Contrast
85
Brightness
50
Colour
50
Sharpness
50
Tint
0
G
R
G
Press MENU to confirm.
4
Contrast
85 F
G
E
74
5
XD
INPUT
D/A
MODE
TV
POWER
INPUT
XD is LG Electronic’s unique picture improving technology
to display a real HD source through an advanced digital
signal processing algorithm.
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
INFO
PIP INPUT
When selecting PSM options (Dynamic, Standard and
Mild), XD is automatically changed to Auto.
But when selecting PSM options (User 1 and User 2), you
can choose the Auto / Manual.
MENU
When selecting the Manual, you can adjust the XD contrast, XD colour and XD noise.
1
LIVE TV
EXIT
MARK
OK
TIME
SHIFT
TIME
SHIFT
PSM
Press the M E N U button and then use D or E button
to select the P I C T U R E menu.
Colour temperature
XD
Advanced
Video preset
2
Press the G button and then use D or E button to
select X D.
3
Press the G button and then use D or E button to
select A u t o or M a n u a l.
Selecting the Manual
1. Press the G button and then use F or G button to select X D c o n t r a s t, X D c o l o u r or
X D n o i s e.
■ X D c o n t r a s t : Optimizing the contrast
automatically according to the brightness of
the reflection.
■ X D c o l o u r : Adjusting the colors of the
reflection automatically to reproduce as
closely as possible to natural colors.
■ X D n o i s e : Removing the noise up to the
point where it does not damage the original
picture.
2. Use the D or E button to select O n or O f f.
4
PSM
Colour temperature
XD
G
Manual
Advanced
Video preset
XD contrast On
XD colour
On
XD noise
On
2
TV MENU / PICTURE ADJUSTMENT
1
3
Press E X I T button to return to normal TV viewing.
75
TV MENU
PICTURE ADJUSTMENT
COLOUR TEMPERATURE CONTROL
INPUT
D/A
MODE
TV
POWER
INPUT
Auto Colour Temperature Control
VCR
BRIGHT
ARC
Choose one of three automatic color adjustments. Set to
warm to enhance hotter colors such as red, or set to cool
to see less intense colors with more blue.
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
MARK
OK
TIME
SHIFT
1
D
PIP INPUT
LIVE TV
EXIT
Press the M E N U button and then use
to select the PICTURE menu.
INFO
TIME
SHIFT
PSM
or E button
Colour temperature
XD
Advanced
Video preset
2
TV MENU / PICTURE ADJUSTMENT
76
Press the G button and then use
select Colour temperature.
D
or E button to
1
3
Press the G button and then use D or E button to
select either W a r m, Medium, C o o l, or U s e r.
PSM
Colour temperature
4
Press E X I T button to return to normal TV viewing.
G
Warm
XD
Medium
Advanced
Cool
Video preset
User
2
3
INPUT
D/A
MODE
TV
POWER
INPUT
VCR
BRIGHT
ARC
Manual Colour Temperature Control
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
INFO
PIP INPUT
You can also adjust the detailed settings (Red, Green, Blue)
by selecting the U s e r menu.
MENU
LIVE TV
EXIT
MARK
OK
TIME
SHIFT
TIME
SHIFT
PSM
Colour temperature
XD
1
Press the M E N U button and then use
to select the PICTURE menu.
2
Press the G button and then use
select Colour temperature.
D
D
or E button
Advanced
Video preset
or E button to
1
3
4
Press the G button and then use
select U s e r.
D
Press the G button and then use
select R e d, Green, or B l u e.
D
or E button to
Colour temperature
Warm
XD
Medium
Advanced
Cool
Video preset
User
G
or E button to
2
5
Press the G button and then use
make appropriate adjustments.
■
F
or G button to
3
User
Red
0
Green
0
Blue
0
G
TV MENU / PICTURE ADJUSTMENT
PSM
The adjustment range of R e d, G r e e n, or B l u e
is -20~ +20.
Press MENU to confirm.
6
4
Press E X I T button to return to normal TV viewing.
Red
0 F
G
E
5
77
TV MENU
PICTURE ADJUSTMENT
ADVANCED-CINEMA
INPUT
D/A
MODE
TV
POWER
INPUT
Set up the TV for the best picture appearance for viewing
movies.
This feature operates only in AV1-2 (480i, 576i) and
Component (480i, 576i) mode.
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
INFO
PIP INPUT
LIVE TV
EXIT
MARK
OK
TIME
SHIFT
TIME
SHIFT
PSM
1
Press the M E N U button and then use
to select the P I C T U R E menu.
D
or E button
Colour temperature
XD
Advanced
Video preset
2
TV MENU / PICTURE ADJUSTMENT
78
Press the G button and then use
select Advanced.
D
or E button to
1
3
Press the G button and then use
select Cinema.
D
or E button to
PSM
Colour temperature
XD
4
Press the G button and then use
select O n or O f f.
5
Press E X I T button to return to normal TV viewing.
D
or E button to
Advanced
Video preset
G
Cinema
Off
Black level
2
Auto
3
4
ADVANCED-BLACK LEVEL
INPUT
D/A
MODE
TV
POWER
INPUT
Adjusting the contrast and the brightness of the screen
using the black level of the screen.
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
INFO
PIP INPUT
This feature operates only in AV1, AV2, HDMI1/DVI or
HDMI2 mode.
MENU
LIVE TV
EXIT
MARK
OK
TIME
SHIFT
TIME
SHIFT
PSM
1
Press the M E N U button and then use
to select the P I C T U R E menu.
D
or E button
Colour temperature
XD
Advanced
Video preset
2
D
or E button to
1
3
Press the G button and then use
select Black Level.
D
or E button to
PSM
Colour temperature
XD
Advanced
4
Press the G button and then use
select A u t o, L o w, or H i g h.
■
■
■
5
D
or E button to
Auto
Realizing the black level of the screen and set it to
High or Low automatically.
Video preset
G
Cinema
Off
Black level
Auto
2
3
4
TV MENU / PICTURE ADJUSTMENT
Press the G button and then use
select Advanced.
Low
The Black Level of the screen gets darker.
High
The Black Level of the screen gets brighter.
Press E X I T button to return to normal TV viewing.
79
TV MENU
PICTURE ADJUSTMENT
VIDEO PRESET
INPUT
D/A
MODE
TV
POWER
INPUT
Use to quickly reset all the Picture menu options to their
original factory preset values.
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
MARK
OK
TIME
SHIFT
1
D
PIP INPUT
LIVE TV
EXIT
Press the M E N U button and then use
to select the P I C T U R E menu.
INFO
TIME
SHIFT
PSM
or E button
Colour temperature
XD
Advanced
Video preset
2
TV MENU / PICTURE ADJUSTMENT
80
Press the G button and then use
select Video preset.
D
or E button to
1
3
Press the G button to reset the picture menu options
to original values.
PSM
Colour temperature
XD
Advanced
Video preset
G
Selection ( G or
) presets
the video configuration.
2
3
TV MENU AUDIO ADJUSTMENT
SOUND STATUS MEMORY (SSM)
INPUT
D/A
MODE
TV
POWER
INPUT
SSM lets you enjoy the best sound without any special
adjustment because the TV sets the appropriate sound
options based on the programme content.
When adjusting sound options (treble and bass) manually,
SSM is automatically changed to User.
Standard, Music, Movie, and Sports are preset for good
sound quality at the factory and are not adjustable.
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
MARK
OK
TIME
SHIFT
1
D
PIP INPUT
LIVE TV
EXIT
Press the M E N U button and then use
to select the AUDIO menu.
INFO
TIME
SHIFT
SSM
or E button
AVL
Balance
TV speaker
2
Press the G button and then use
select S S M.
D
or E button to
3
Press the G button and then use D or E button to
select S t a n d a r d, M u s i c, M o v i e, S p o r t s, or U s e r.
SSM
4
Press E X I T button to return to normal TV viewing.
G
Standard
AVL
Music
Balance
Movie
TV speaker
Sports
User
2
TV MENU / AUDIO ADJUSTMENT
1
3
81
TV MENU
AUDIO ADJUSTMENT
MANUAL SOUND CONTROL
(SSM-User option)
INPUT
D/A
MODE
TV
POWER
INPUT
VCR
BRIGHT
ARC
Adjust the sound to suit your taste and room situations.
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
MARK
OK
TIME
SHIFT
1
D
PIP INPUT
LIVE TV
EXIT
Press the M E N U button and then use
to select the AUDIO menu.
INFO
TIME
SHIFT
SSM
or E button
AVL
Balance
TV speaker
2
Press the G button and then use
select S S M.
D
or E button to
TV MENU / AUDIO ADJUSTMENT
1
3
Press the G button and then use
select U s e r.
D
or E button to
SSM
Standard
AVL
Music
Balance
Movie
TV speaker
4
Sports
Press the G button and then use D or E button to
Treble, B a s s, or
select the desired sound option (T
Front Surround).
User
G
2
3
User
Treble
50
Bass
50
Front Surround
Press
MENU
G
Off
to confirm.
4
82
5
Press the G button and then use
make appropriate adjustments.
F
or G button to
6
Press E X I T button to return to normal TV viewing.
Front Surround
SRS TruSurround XT
TV MENU / AUDIO ADJUSTMENT
Selecting the F r o n t s u r r o u n d
Press the G button and then use F or G button to
select O f f , 3D Echo sound system or S R S(Sound
TruSurround XT .
Retrieval System)T
SRS TruSurround XT
Takes advantage of any multi-channel format without
needing to add extra speakers or equipment. Dialog clarity, bass enrichment, and the addition of stereo audio
enhancement produces an immersive sound experience
from standard stereo material.
3D Echo sound system
Creates a stunning simulated stereo effect from any mono
sound and a realistic three-dimensional sound with a very
wide and deep sound stage.
83
TV MENU
AUDIO ADJUSTMENT
AUTO VOLUME LEVELLER (AVL)
INPUT
D/A
MODE
TV
POWER
INPUT
AVL automatically keeps on an equal volume level even if
you change programmes.
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
MARK
OK
TIME
SHIFT
1
D
PIP INPUT
LIVE TV
EXIT
Press the M E N U button and then use
to select the AUDIO menu.
INFO
TIME
SHIFT
SSM
or E button
AVL
Balance
TV speaker
2
Press the G button and then use
select A V L.
D
or E button to
TV MENU / AUDIO ADJUSTMENT
1
3
Press the G button and then use
select O f f or O n.
D
or E button to
SSM
AVL
Balance
4
Press E X I T button to return to normal TV viewing.
G
Off
On
TV speaker
2
84
3
BALANCE
INPUT
D/A
MODE
TV
POWER
INPUT
Adjust the left/right sound of speaker to suit your taste
and room situations.
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
MARK
OK
TIME
SHIFT
1
D
PIP INPUT
LIVE TV
EXIT
Press the M E N U button and then use
to select the AUDIO menu.
INFO
TIME
SHIFT
SSM
or E button
AVL
Balance
TV speaker
2
Press the G button and then use
select Balance.
D
or E button to
3
Press the G button and then use
make appropriate adjustments.
F
or G button to
SSM
AVL
Balance
0
L
R
TV speaker
4
Press E X I T button to return to normal TV viewing.
2
Balance
0
L
TV MENU / AUDIO ADJUSTMENT
1
R
3
85
TV MENU
AUDIO ADJUSTMENT
TV SPEAKERS ON/OFF SETUP
INPUT
D/A
MODE
TV
POWER
INPUT
Turn the TV speakers off if using external audio equipment.
In AV1-2, Component1-2, RGB PC/DTV and HDMI/DVI
mode, the audio signal can be outputted even though
there is no video signal.
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
MARK
OK
TIME
SHIFT
1
D
PIP INPUT
LIVE TV
EXIT
Press the M E N U button and then use
to select the AUDIO menu.
INFO
TIME
SHIFT
SSM
or E button
AVL
Balance
TV speaker
2
TV MENU / AUDIO ADJUSTMENT
Press the G button and then use
select TV speaker.
D
or E button to
1
3
Press the G button and then use
select O f f or O n.
D
or E button to
SSM
AVL
4
Press E X I T button to return to normal TV viewing.
Balance
TV speaker
G
Off
On
2
86
3
STEREO RECEPTION - In Analogue Mode only
■
Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to
mono by pressing the I / I I button twice. In mono reception, the
clarity of sound is improved. To switch back to stereo, press the
I / I I button twice again.
Broadcast
On Screen Display
Mono
MONO
Stereo
MONO / STEREO
INPUT
D/A
MODE
TV
POWER
INPUT
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
INFO
PIP INPUT
LIVE TV
EXIT
MARK
TIME
SHIFT
TIME
SHIFT
OK
Q.VIEW
VOL
PR
PAGE
MUTE
In AV 1-2, Component 1-2, RGB-PC/DTV, HDMI1/DVI or HDMI2
mode, you can select output sound for the left and right loudspeakers.
Repeatedly press the I / I I button to select the sound output.
L+R: Audio signal from audio L input is sent to the left loud
speaker and audio signal from audio R input is sent to the right
loud speaker.
L+L: Audio signal from audio L input is sent to left and right loud
speakers.
R+R: Audio signal from audio R input is sent to left and right loud
speakers.
2
3
4
5
6
7
8
9
LIST
0
FAV
SIZE
INDEX
TIME
REVEAL
I/II
APM
SLEEP
ADJUST
?
TV MENU / AUDIO ADJUSTMENT
SOUND OUTPUT SELECTION
1
! NOTE
G
In digital mode, repeatedly press the I / I I button to
change the audio mode (MPEG or DOLBY DIGITAL).
87
TV MENU TIME SETTING
AUTO CLOCK SETUP
INPUT
D/A
MODE
TV
POWER
INPUT
The time is automatically set from a digital channel signal.
The digital channel signal includes information for the current time provided by the broadcasting station.
Set the clock manually, if the current time is set incorrectly
by the auto clock function.
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
INFO
PIP INPUT
LIVE TV
EXIT
MARK
OK
TIME
SHIFT
1
Press the M E N U button and then use
to select the T I M E menu.
D
TIME
SHIFT
Auto clock
or E button
Manual clock
Off time
On time
Sleep timer
Auto sleep
2
Press the G button and then use
select Auto clock.
D
or E button to
TV MENU / TIME SETTING
1
3
Press the G button and then use
select O n.
D
or E button to
Auto clock
Manual clock
Off time
G
Off
On
Time Zone
NSW/ACT
On time
4
5
Press the G button and then use D or E button to
select your viewing area time zone:
NSW/ACT, N T, T A S, W A, S A, Q L D, or V I C.
Sleep timer
Auto sleep
2
Press E X I T button to return to normal TV viewing.
Auto clock
Manual clock
Off time
Off
On
Time Zone
D
E
NSW/ACT
On time
Sleep timer
Auto sleep
3
88
4
MANUAL CLOCK SETUP
INPUT
D/A
MODE
TV
POWER
INPUT
If the current time setting is wrong, reset the clock manually.
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
1
Press the M E N U button and then use
to select the T I M E menu.
D
PIP INPUT
LIVE TV
EXIT
TIME
SHIFT
INFO
MARK
OK
TIME
SHIFT
Auto clock
or E button
Manual clock
Off time
On time
Sleep timer
Auto sleep
2
Press the G button and then use
select Manual clock.
D
or E button to
3
Press the G button and then use F or G to select
either the year, date, or time option. Once selected,
use the D or E button to set the year, date, and time
options.
Auto clock
Manual clock
Off time
On time
G
Year
Date
Time
---
---/ -: --
--
Sleep timer
4
Press E X I T button to return to normal TV viewing.
Auto sleep
2
TV MENU / TIME SETTING
1
3
89
TV MENU
TIME SETTING
ON/OFF TIME SETUP
INPUT
D/A
MODE
TV
POWER
INPUT
The time function operates only if the current time has
been set.
The Off-Time function overrides the On-Time function if
they are both set to the same time.
The TV must be in standby mode for the On-Time function
to work.
If you do not press any button within 2 hours after the TV
turns on with the On Time function, the TV will automatically revert to standby mode.
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
Press the M E N U button and then use
to select the T I M E menu.
D
PIP INPUT
LIVE TV
EXIT
MARK
OK
TIME
SHIFT
1
INFO
TIME
SHIFT
or E button
Auto clock
2
Press the G button and then use
select Off Time or On Time.
D
Manual clock
or E button to
Off time
On time
Sleep timer
Auto sleep
TV MENU / TIME SETTING
3
4
Press the G button and then use D or E button to
select O n.
■ To cancel the O n / O f f t i m e function, select O f f.
Press the G button and then use
set the hour.
or E button to
Auto clock
Manual clock
Off time
On Time
Sleep timer
5
6
Press the G button and then use
set the minutes.
Only On time
Press the G button and then use
the programme at turn-on.
Press the G button and then use
sound level at turn-on.
7
90
D
1
D
or E button to
Auto sleep
G
Off
On
Time
PR.
Vol
2
D
or E to select
D
or E to set the
Press E X I T button to return to normal TV viewing.
3
6
: 30 AM
0
17
ANALOGUE
4
5
6
Q.VIEW
SLEEP TIMER
VOL
PR
PAGE
MUTE
You don’t have to remember to switch the set off before you go
to sleep.
The sleep timer automatically switches the set to standby after
the preset time has elapsed.
1
2
3
4
5
6
7
8
9
LIST
0
FAV
SIZE
INDEX
TIME
REVEAL
I/II
APM
SLEEP
ADJUST
?
1
2
Press the SLEEP button repeatedly to select the number of minutes. First the
O f f option appears on the screen, followed by the following sleep timer
options : 10, 20, 30, 60, 90, 120, 180, and 240 minutes.
When the number of minutes you want is displayed on the screen, press the
SLEEP button. The timer begins to count down from the number of minutes
selected.
To check the remaining minutes before the TV turns off, press the SLEEP
button once.
4
To cancel the Sleep Timer, press the SLEEP button repeatedly to select O f f.
5
When you switch the set off, the set cancels the preset sleep time.
TV MENU / TIME SETTING
3
You can also set up the Sleep timer in the TIME menu.
■
Auto clock
Auto clock
Off
Manual clock
Manual clock
10 min
Off time
Off time
20 min
On time
On time
Sleep timer
Sleep timer
Auto sleep
Auto sleep
30 min
G
60 min
90 min
120 min
180 min
240 min
91
TV MENU
TIME SETTING
AUTO SLEEP
INPUT
D/A
MODE
TV
POWER
INPUT
If the TV set is on and there is no input signal, the TV
turns off automatically after 10 minutes.
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
MARK
OK
TIME
SHIFT
1
D
PIP INPUT
LIVE TV
EXIT
Press the M E N U button and then use
to select the T I M E menu.
INFO
TIME
SHIFT
Auto clock
or E button
Manual clock
Off time
On time
Sleep timer
Auto sleep
2
Press the G button and then use
select Auto sleep.
D
or E button to
TV MENU / TIME SETTING
1
3
Press the G button and then use
select O f f or O n.
D
or E button to
Auto clock
Manual clock
Off time
4
Press E X I T button to return to normal TV viewing.
On time
Sleep timer
Auto sleep
G
Off
On
2
92
3
TV MENU OPTIONAL FEATURES
SUBTITLE - In Digital Mode only
INPUT
D/A
MODE
TV
POWER
INPUT
You can select Subtitle on or off with the TEXT button in
DTV mode.
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
MARK
OK
TIME
SHIFT
1
D
PIP INPUT
LIVE TV
EXIT
Press the M E N U button and then use
to select the SPECIAL menu.
INFO
TIME
SHIFT
Subtitle
or E button
Child lock
ARC
Demo
ISM method
Low power
2
Press the G button and then use
select Subtitle.
D
or E button to
Front index
3
Press the G button and then use
select O f f or O n.
D
or E button to
Subtitle
Child lock
G
Off
On
ARC
Demo
4
Press E X I T button to return to normal TV viewing.
ISM method
Low power
Front index
2
3
TV MENU / OPTIONAL FEATURES
1
93
TV MENU
OPTIONAL FEATURES
CHILD LOCK
INPUT
D/A
MODE
TV
POWER
INPUT
The TV can be set so that the remote control is needed to
control it. This feature can be used to prevent unauthorized viewing.
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
MARK
OK
TIME
SHIFT
1
D
PIP INPUT
LIVE TV
EXIT
Press the M E N U button and then use
to select the SPECIAL menu.
INFO
TIME
SHIFT
Subtitle
or E button
Child lock
ARC
Demo
ISM method
Low power
TV MENU / OPTIONAL FEATURES
2
Press the G button and then use
select Child lock.
D
or E button to
3
Press the G button and then use
select O f f or O n.
D
or E button to
Subtitle
Child lock
G
Off
On
ARC
Demo
Press E X I T button to return to normal TV viewing.
4
ISM method
Low power
Front index
2
! NOTE
94
Front index
G
With the lock on, the display ‘ C h i l d l o c k : O n ’
appears on the screen if any button on the front
panel is pressed while viewing the TV.
G
The display ‘ C h i l d l o c k : O n ’ will not appear on
the screen if any button on the front panel is
pressed while displaying the menus.
PICTURE FORMAT
INPUT
D/A
MODE
TV
POWER
INPUT
You can watch TV in various picture formats; Auto, 4:3, 16:9 (Wide), 14:9,
Zoom, Cinema zoom and 1:1 Pixel.
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
INFO
PIP INPUT
! NOTE
G
If a fixed image is displayed on the screen for a long time, it may become
imprinted on the screen and remain visible.
This phenomenon is common to all manufactures and in consequence the
manufactures warranty does not cover the product bearing this phenomenon.
MENU
LIVE TV
EXIT
TIME
SHIFT
MARK
OK
TIME
SHIFT
Press the A R C button repeatedly to select the desired picture format.
1
■
You can also adjust A R C in the SPECIAL menu.
Zoom
Selects the proper picture proportion to
match the source’s image. (4:3 4:3, 16:9
16:9)
Choose Zoom when you want to view the
picture without any alteration. However, the
top and bottom portions of the picture will be
cropped.
You can move the Zoom screen using D or E
button. The adjustment range is -16 - +16.
4:3
Choose 4:3 when you want to view a picture
with an original 4:3 aspect ratio.
16:9
Adjust the picture horizontally, in a linear proportion to fill the entire screen.
14:9
The screen size is, more enlarged at both
sides, to create a spectacular view.
You can move the 14:9 screen using D or E
button. The adjustment range is -10 - +10.
Cinema Zoom
Choose Cinema Zoom when you want to
enlarge the picture in correct proportion.
Note: When enlarging or reducing the picture,
the image may become distorted.
You can adjust the enlarge proportion of
Cinema Zoom using D or E button.
The adjustment range is 1-16.
1:1 Pixel
Displays the picture for 1080i or 1080p
source in the original size when parts of the
picture are cut off.
TV MENU / OPTIONAL FEATURES
Auto
! NOTE
G
G
G
In HDMI/DVI-PC and RGB-PC mode, 4:3 and 16:9 is available.
Auto: When your TV receives the wide screen signal, it will be automatically changed to the picture format
sent. (Not available in all countries)
In HDMI/DVI(1080i, 50/60Hz or 1080p, 50/60Hz)mode, 1:1 Pixel is available.
95
TV MENU
OPTIONAL FEATURES
XD DEMO
INPUT
D/A
MODE
TV
POWER
INPUT
Allows you to select your preferred picture mode after
compairing the four different picture (Dynamic, Standard,
Mild, and User1 (or User2)) settings.
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
PIP INPUT
LIVE TV
EXIT
MARK
OK
TIME
SHIFT
1
Press the M E N U button and then use
to select the SPECIAL menu.
D
INFO
TIME
SHIFT
Subtitle
or E button
Child lock
ARC
Demo
ISM method
Low power
2
Press the G button and then use
D e m o.
select
D
or E button to
Front index
TV MENU / OPTIONAL FEATURES
1
3
Press the G button to start
D e m o.
Subtitle
Child lock
4
Press E X I T button to stop
demo.
ARC
Demo
G
ISM method
Selection ( Gor ) leads you
Demo.
to the
Low power
Front index
2
Dynamic
Standard
Mild
User1
EXIT
96
Exit
3
ISM (Image Sticking Minimization) METHOD
INPUT
D/A
- 50PB2DR only
MODE
TV
POWER
INPUT
A frozen still picture from a PC/video game displayed on
the screen for prolonged periods will result in a fixed ghost
image. Use our unique method to minimize any fixed image
on the screen.
1
2
3
Press the M E N U button and then use D or E button
to select the S P E C I A L menu.
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
INFO
PIP INPUT
LIVE TV
MARK
OK
TIME
SHIFT
Press the G button and then use D or E button to
select either N o r m a l, W h i t e w a s h, O r b i t e r or
I n v e r s i o n.
TIME
SHIFT
Subtitle
Child lock
ARC
Demo
ISM method
Normal
If image sticking is never a problem, ISM is not necessary - set to Normal.
Low power
Front index
Orbiter
Orbiter may help prevent ghost images. However, it
is best not to allow any fixed image to remain on the
screen. To avoid a permanent image on the screen,
the image will move once per 2 minutes.
1
Subtitle
■
■
Inversion
Inversion will automatically invert the plasma display
panel color every 30 minutes.
White wash
White Wash removes permanent images from the
screen.
! NOTE
G
4
Child lock
ARC
Demo
ISM method
Low power
Front index
G
Normal
Orbiter
Inversion
White wash
2
TV MENU / OPTIONAL FEATURES
■
DVD
EXIT
Press the G button and then use D or E button to
select I S M m e t h o d.
■
VCR
BRIGHT
ARC
3
An excessive permanent image may be impossible
to clear entirely with White Wash. To return to normal viewing, press any button.
Press E X I T button to return to normal TV viewing.
97
TV MENU
OPTIONAL FEATURES
LOW POWER - 50PB2DR only
INPUT
D/A
MODE
TV
POWER
INPUT
Low power reduces the plasma display power consumption.
VCR
BRIGHT
ARC
DVD
PIP
TEXT
GUIDE
PIP PR-
PIP PR+
SWAP
MENU
MARK
OK
TIME
SHIFT
Press the M E N U button and then use D or E button
to select the S P E C I A L menu.
PIP INPUT
LIVE TV
EXIT
1
INFO
TIME
SHIFT
Subtitle
Child lock
ARC
Demo
ISM method
TV MENU / OPTIONAL FEATURES
2
Press the G button and then use D or E button to
select L o w p o w e r.
3
Press the G button and then use D or E button to
select O f f or O n.
Low power
Front index
1
Subtitle
■
When you select O n, the screen darkens.
Child lock
ARC
Demo
ISM method
Low power
4
Press E X I T button to return to normal TV viewing.
Front index
G
Off
On
2
98
3
FRONT INDEX - 50PB2DR only
Subtitle
Child lock
1
ARC
Press the M E N U button and then use D or E button
to select the S P E C I A L menu.
Demo
ISM method
Low power
Front index
2
1
Subtitle
3
Press the G button and then use D or E button to
select O f f , D a r k or B r i g h t.
Child lock
ARC
Demo
ISM method
Low power
4
Front index
Press E X I T button to return to normal TV viewing.
G
Off
Dark
Bright
2
3
TV MENU / OPTIONAL FEATURES
Press the G button and then use D or E button to
select F r o n t i n d e x.
99
TV MENU
LOCK ADJUSTMENT
SETTING UP YOUR PASSWORD
Set up is used to block specific programmes, ratings, and external
viewing sources.
A password is required to gain access to this menu.
1
Press the M E N U button and then use the D or E button
to select the L O C K menu. Then, press the G button.
■
■
Enter the password as requested.
The TV is set up with the initial
password “0-0-0-0”.
Enter
Password
Enter
Password
*
*
*
*
LOCK SYSTEM
TV MENU / LOCK ADJUSTMENT
Enables or disables the blocking scheme you set up previously.
1
After inputting the current password, use the D or E
button to choose L o c k s y s t e m.
Lock system
Set password
Block programme
Parental guidance
Aux. block
2
Press the G button and then use the D or E button
to select O n or O f f.
■
When you select O n, the Lock System is enabled.
1
Lock system
3
Press E X I T button to return to normal TV viewing.
Set password
G
Off
On
Block programme
Parental guidance
Aux. block
2
100
SET PASSWORD
Change the password by inputting a new password twice.
After inputting the password, use the D or E button
to choose S e t p a s s w o r d.
1
Lock system
Set password
Block programme
Parental guidance
Aux. block
Press the G button and then choose any 4 digits for
your new password next to New.
2
As soon as the 4 digits are entered, re-enter the same
4 digits on the C o n f i r m.
The new password is memorized.
1
Lock system
Set password
Block programme
G
New
Confirm
* * * *
* * * *
Parental guidance
Press E X I T button to return to normal TV viewing.
3
G
If you ever forget your password, key in ‘7’, ‘7’, ‘7’, ‘7’
on the remote control.
2
TV MENU / LOCK ADJUSTMENT
! NOTE
Aux. block
101
TV MENU
LOCK ADJUSTMENT
BLOCK PROGRAMME
Select a programme number that you wish to block.
1
After inputting the password, use the
to choose B l o c k p r o g r a m m e.
D
Lock system
or E button
Set password
Block programme
Parental guidance
Aux. block
2
Press the G button. You will now see a screen filled
with programme numbers and a preview picture.
1
3
TV MENU / LOCK ADJUSTMENT
Use D E F G buttons to select a programme and
then use the O K button to block or unblock it.
Lock system
Set password
Block programme
Parental guidance
4
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
Aux. block
G
Selection ( G or ) leads
you to the block programme
screen.
2
Move
3
102
PARENTAL GUIDANCE - In Digital Mode only
Prevents children from watching certain children's TV programs, according to the ratings limit set.
Lock system
1
After inputting the password, use the
to choose P a r e n t a l g u i d a n c e.
D
Set password
or E button
Block programme
Parental guidance
Aux. block
2
Press the G button and then use the
select G , P G, M , M A, A V or R .
D
or E to
G (General audiences)
■ PG (Parental guidance suggested)
■ M (Mature audiences)
■ MA (Mature adult audiences)
■ AV (Adult audiences)
■ R (Restricted)
■ Blocking Off (Permits all programmes)
■
3
1
Blocking off :
permits all programmes
Lock system
Set password
Block programme
Parental guidance
G
Aux. block
G
PG
M
MA
AV
R
Blocking Off
Press E X I T button to return to normal TV viewing.
AUX. BLOCK
Enables you to select a source to block from the external
source devices you have hooked up.
Lock system
Set password
Block programme
Parental guidance
Aux. block
or E button
1
After inputting the password, use the
to choose Aux. block.
2
Press the G button and then use the F or G button
to select a source.
3
Press the G button and then use the D or E button
to select O n or O f f on the each source.
D
1
Lock system
Set password
Block programme
Parental guidance
4
Press E X I T button to return to normal TV viewing.
TV MENU / LOCK ADJUSTMENT
2
Aux. block
G
AV1
AV2
Component1
Component2
On
On
Off
On
RGB
HDMI1/DVI
HDMI2
Off
On
On
2
3
103
APPENDIX
EXTERNAL CONTROL DEVICE SETUP
Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V
control system) to control the TV’s functions externally.
Note: RS-232C connection cables are not supplied with the TV.
RS-232C Setup
HDMI IN
RS-232C IN
DIGITAL AUDIO
(CONTROL & SERVICE)
OUT
OPTICAL
2
1 (DVI)
Type of Connector; D-Sub 9-Pin Male
APPENDIX
104
No.
Pin Name
1
2
3
4
5
6
7
8
9
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connection
1
5
6
9
RS-232C Configurations
7-Wire Configurations (Standard RS-232C cable)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
8
7
D-Sub 9
D-Sub 9
TXD
RXD
GND
DSR
DTR
CTS
RTS
3-Wire Configurations(Not standard)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
7
8
D-Sub 9
D-Sub 9
TXD
RXD
GND
DTR
DSR
RTS
CTS
Set ID
Use this function to specify a TV ID number.
Refer to ‘Real Data Mapping1’. See page 107.
1
Press the M E N U button and then use
to select the SETUP menu.
D
or E button
Auto programme
Manual programme
Programme edit
Signal strength
Press the G button and then use
select Set ID.
D
APPENDIX
2
Main input
or E button to
Sub input
Aux. label
Booster
Set ID
3
Press the G button and then use D or E button to
adjust Set ID to choose the desired TV ID number.
The adjustment range of Set ID is 1~99.
1
Auto programme
Manual programme
Programme edit
Signal strength
4
Press E X I T button to return to TV viewing or press
M E N U button to return to the previous menu.
Main input
Sub input
Aux. label
Booster
Set ID
Baud rate : 9600 bps (UART)
■ Data length : 8 bits
■ Parity : None
1
2
Communication Parameters
■
G
3
Stop bit : 1 bit
■ Communication code : ASCII code
■ Use a crossed (null modem) cable.
■
105
APPENDIX
Command Reference List
COMMAND1 COMMAND2
01. Power
k
a
DATA
(Hexadecimal)
COMMAND1 COMMAND2
DATA
(Hexadecimal)
0~1
17. Bass
k
s
0 ~ 64
18. Balance
k
t
0 ~ 64
02. Input Select
k
b
0~9
03. Aspect Ratio
k
c
See p.107
19. Colour Temperature
k
u
0~3
k
v
0 ~ C8
04. Screen Mute
k
d
0~1
20. Red Adjustment
05. Volume Mute
k
e
0~1
21. Green Adjustment
k
w
0 ~ C8
k
$
0 ~ C8
06. Volume Control
k
f
0 ~ 64
22. Blue Adjustment
07. Contrast
k
g
0 ~ 64
23. PIP Input Source
k
y
0~3
j
p
0~3
08. Brightness
k
h
0 ~ 64
24. ISM Method
09. Colour
k
i
0 ~ 64
25. Low Power
j
q
0~1
26. Orbiter Time
Setting
j
r
1 ~ FE
27. Orbiter Pixel
Setting
j
s
1~3
28. Channel Tuning
m
a
See~p.109
29. Send IR Code
m
c
See p.110
10. Tint
k
j
0 ~ 64
11. Sharpness
k
k
0 ~ 64
12. OSD Select
k
l
0~1
k
m
0~1
14. PIP/POP/Twin
k
n
0~3
15. PIP Position
k
q
0~3
16. Treble
k
r
0 ~ 64
13. Remote Control/
Key Lock
Only 50PB2DR model
APPENDIX
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] : First command to control the set.(j, k, m or x)
[Command 2] : Second command to control the set.
[Set ID] : You can adjust the Set ID to choose desired TV ID
number in Setup menu. Adjustment range is 1~ 99.
When selecting Set ID ‘0’, every connected the TV
is controlled. Set ID is indicated as decimal (1~
99) on menu and as Hexa decimal (0x0~ 0x63)
on transmission/receiving protocol.
[DATA] : To transmit command data.
Transmit ‘FF’ data to read status of comand.
[Cr] : Carriage Return
ASCII code ‘0x0D’
[ ] : ASCII code ‘space (0x20)’
106
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
The TV transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is
data read mode, it indicates present status data. If the data is
data write mode, it returns the data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
The TV transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable functions
or communication errors.
Data1: Illegal Code
Data2: Not supported function
Data3: Wait more time
0 1 . Power (Command2:a)
To control Power On/Off of the TV.
Transmission [k][a][ ][Set ID][ ][Data][Cr]
Data 0 : Power Off
Data 1 : Power On
Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
* In a like manner, if other functions transmit ‘FF’ data
based on this format, Acknowledgement data feedback
presents status about each function.
02. Input Select (Command2:b) (Main Picture Input)
To select input source for the TV.
Transmission [k][b][ ][Set ID][ ][Data][Cr]
Data 0: Digital
Data 5: Component 2
Data 1: Analogue
Data 6: RGB-DTV
Data 2: AV1
Data 7: RGB-PC
Data 3: AV2
Data 8: HDMI1/DVI
Data 4: Component 1
Data 9: HDMI2
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
To adjust volume.
You can also adjust volume with the volume buttons on
remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
Refer to ‘Real data mapping1’ as shown below.
Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]
07. Contrast (Command2:g)
To adjust screen contrast.
You can also adjust contrast in the Picture menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
Refer to ‘Real data mapping1’ as shown below.
Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
0 8 . Brightness (Command2:h)
To adjust screen brightness.
You can also adjust brightness in the Picture menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64(*transmit by Hexadecimal code)
Refer to ‘Real data mapping1’ as shown below.
Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
09. Colour (Command2:i)
To adjust the screen colour.
You can also adjust colour in the Picture menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
APPENDIX
03. Aspect Ratio (Command2:c) (Main picture format)
To adjust the screen format.
You can also adjust the screen format using the ARC
button on remote control or in the Special menu.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Date 0: Auto
1: 4:3
2: 16:9
3: 14:9 (-10) ~ D: 14:9 (0) ~ 17: 14:9 (10)
18: Zoom (-16) ~ 28: Zoom (0) ~ 38: Zoom (16)
39: Cinema Zoom (1) ~ 48: Cinema Zoom (16)
49: 1:1 Pixel
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
* In HDMI/DVI(1080i, 50/60 or
1080p, 50/60)mode, 1:1 Pixel is available.
06. Volume Control (Command2:f)
Refer to ‘Real data mapping1’ as shown below.
Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]
0 4 . Screen Mute (Command2:d)
To select screen mute on/off.
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data 0 : Screen mute off (Picture on)
Data 1 : Screen mute on (Picture off)
Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]
05. Volume Mute (Command2:e)
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 0 : Volume mute off (Volume on)
Data 1 : Volume mute on (Volume off)
Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]
*Real data mapping 1
0 : Step 0
A : Step 10 (SET ID 10)
F : Step 15 (SET ID 15)
10 : Step 16 (SET ID 16)
63 : Step 99 (SET ID 99)
64 : Step 100
Tint: R50 ~ G50, Balance: L50 ~ R50
107
APPENDIX
10. Tint (Command2:j)
To adjust the screen tint (only 60Hz).
You can also adjust tint in the Picture menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red : 0 ~ Green : 64
*Refer to ‘Real data mapping1’. See page 107.
Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]
15. PIP Position (Command2:q)
To select sub picture position for PIP.
Transmission [k][q][ ][Set ID][ ][Data][Cr]
Data 0: Right down on screen
Data 1: Right up on screen
Data 2: Left up on screen
Data 3: Left down on screen
Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]
11. Sharpness (Command2:k)
To adjust the screen sharpness.
You can also adjust sharpness in the Picture menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
*Refer to ‘Real data mapping1’. See page 107.
Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
16. Treble (Command2:r)
To adjust treble.
You can also adjust treble in the Audio menu.
Transmission [k][r][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code)
*Refer to ‘Real data mapping1’. See page 107.
Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
12. OSD Select (Command2:l)
To select OSD (On Screen Display) on/off.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 0: OSD off
Data 1: OSD on
Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]
* When setting “OSD - Off”, every OSD doesn’t display
on screen.
17. Bass (Command2:s)
To adjust bass.
You can also adjust bass in the Audio menu.
Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code)
*Refer to ‘Real data mapping1’. See page 107.
Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
13. Remote Control Lock Mode (Command2:m)
APPENDIX
To lock the remote control and the front panel controls
on the set.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 0: Lock off
Data 1: Lock on
Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
14. PIP / POP / Twin Picture (Command2:n)
To control the PIP (Picture-in-Picture)/POP/Twin picture. You can also control the PIP/POP/Twin picture
using the PIP button on the remote control.
Transmission [k][n][ ][Set ID][ ][Data][Cr]
Data 0: PIP off
2: POP
1: PIP
3: Twin picture
Acknowledgement [n][ ][Set ID][ ][OK/NG][Data][x]
18. Balance (Command2:t)
To adjust balance.
You can also adjust balance in the Audio menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code)
*Refer to ‘Real data mapping1’. See page 107.
Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
19. Colour Temperature (Command2:u)
To adjust colour temperature.
You can also adjust colour temperature in the Picture
menu.
Transmission [k][u][ ][Set ID][ ][Data][Cr]
Data 0: Medium 1: Cool 2: Warm 3: User
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
20. Red Adjustment(Command:v)
To adjust red in colour temperature
Transmission [k][v][ ][Set ID][ ][Data][Cr]
Data Min:0 ~ Max:C8
*Refer to "Real data mapping 2". See page 109.
Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]
108
21. Green Adjustment(Command:w)
25. Low Power (Command2:q)
To adjust green in colour temperature.
(Only 50PB2DR model)
Transmission [k][w][ ][Set ID][][Data][Cr]
Data Min:0 ~ Max:C8
*Refer to "Real data mapping 2" as shown below
Acknowledgement [w][ ][Set ID][ ][OK/NG][Data][x]
To reduce the power consumption of the set. You can
also adjust Low power in Special menu.
Transmission [ j ][q][ ][Set ID][ ][Data][Cr]
Data 0: low power off
1: low power on
Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]
22. Blue Adjustment(Command:$)
To adjust blue in colour temperature.
Transmission [k][$][ ][Set ID][ ][Data][Cr]
Data Min:0 ~ Max:C8
*Refer to "Real data mapping 2"as shown below
Acknowledgement [$][ ][Set ID][ ][OK/NG][Data][x]]
*Real data mapping 2
0 : -20
5 : -19
A : -18
5F: -1
64: 0
69: +1
C3 : +19
C8 : +20
23. PIP Input Select (Command2:y)
24. ISM Method (Command2:p)
(Only 50PB2DR model)
To control the ISM method. You can also adjust ISM
method in Special menu.
Transmission [ j ][p][ ][Set ID][ ][Data][Cr]
Data 0: Normal
Data 1: Orbiter
Data 2: Inversion
Data 3: White Wash
Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x]
(Only 50PB2DR model)
To adjust orbiter operation time term.
Transmission [ j ][r][ ][Set ID][ ][Data][Cr]
Data Min: 1~ Max: FE(*transmit by Hexadecimal code),
Unit: Second
*Refer to ‘Real data mapping1’. See page 107.
Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
27. Orbiter Pixel Setting (Command2:s)
(Only 50PB2DR model)
To adjust pixel number in orbiter function.
Transmission [ j ][s][ ][Set ID][ ][Data][Cr]
Data Min: 1~ Max: 3
*Refer to ‘Real data mapping1’. See page 107.
Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
28. Channel Tuning (Command: m a)
To tune channel to following programme number
Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1]
[ ][Data2][Cr]
APPENDIX
To select input source for sub picture in PIP/Twin picture
mode. You can also adjust input source for sub picture
using PIP INPUT button remote control.
Transmission [k][y][ ][Set ID][ ][Data][Cr]
Data 0: Digital
Data 2: AV1
Data 1: Analogue
Data 3: AV2
Acknowledgement [y][ ][Set ID][ ][OK/NG][Data][x]
26. Orbiter Time Setting (Command2:r)
Data 0: High channel data
Data 1: Low channel data
Data 2: 00: Analogue TV Main
: 01: Analogue TV Sub
: 10: Digital Main
: 11: Digital Sub
ex) Analogue TV Main: ma 0 00 01 00
Digital Sub: ma 0 00 0A 11
* Channel Data Range:
Analogue TV: 0 ~ 63
Digital TV: 0 ~ 3E7
109
APPENDIX
29. Send IR Code (Command: m c)
To send IR remote key code
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Data Key code: Refer to page 112.
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
* In this function, It’s unavailable to use the IR Code “08
(Power)” and C4 (Power On)”.
APPENDIX
110
IR CODES
1. How to Connect
■
Connect your wired remote control to the Remote Control port on the TV.
2. Remote Control IR Codes
■
Output waveform
Single pulse, modulated with 37.917KHz signal at 455KHz
Carrier frequency
Tc
FCAR = 1/TC = fOSC/12
Duty ratio = T1/TC = 1/3
T1
■
Configuration of frame
1st frame
Lead code
Low custom code
High custom code
Data code
Data code
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
Repeat frame
Repeat code
■
Tf
Lead code
■
APPENDIX
9 ms
4.5 ms
Repeat code
0.55 ms
9 ms
■
2.25 ms
Bit description
Bit ”1”
Bit ”0”
0.56 ms
0.56 ms
2.24 ms
1.12 ms
■
Frame interval: Tf
The waveform is transmitted as long as a key is depressed.
Tf
Tf
Tf=108ms @455KHz
111
APPENDIX
(Hexa)
Code
Function
Note
50
D/A INPUT
Remote control Button
0B
INPUT
Remote control Button
08
POWER
Remote control Button (Power On/Off) 5A
79
ARC
Remote control Button
0E
SLEEP
Remote control Button
10-19
Number Key 0-9
Remote control Button
1A
Q.VIEW
Remote control Button
09
MUTE
Remote control Button
02
VOL +
Remote control Button
03
VOL -
Remote control Button
00
PR +
Remote control Button
01
PR -
Remote control Button
1E
FAV
Remote control Button
40
D
Remote control Button
41
Function
D6
TV
Note
Discrete IR Code
(TV Input Selection)
AV1
Discrete IR Code
(AV1 Input Selection)
D0
AV2
Discrete IR Code
(AV2 Input Selection)
BF
COMPONENT1
D4
COMPONENT2
Discrete IR Code
(Component1 Input Selection)
Discrete IR Code
(Component2 Input Selection)
D5
RGB-PC
Discrete IR Code
(RGB-PC Input Selection)
D7
RGB-DTV
Discrete IR Code
(RGB-DTV Input Selection)
APPENDIX
E
Remote control Button
07
F
Remote control Button
06
G
Remote control Button
44
OK
Remote control Button
43
MENU
Remote control Button
5B
EXIT
Remote control Button
60
PIP
Remote control Button
72
PIP PR -
Remote control Button
71
PIP PR +
Remote control Button
63
SWAP
Remote control Button
61
PIP INPUT
Remote control Button
92
APM
Remote control Button
A9
GUIDE
Remote control Button
64
SIZE
Remote control Button
70
INDEX
Remote control Button
CB
ADJUST
Remote control Button
26
TIME
Remote control Button
BO
PLAY
Remote control Button
C6
HDMI1/DVI
Discrete IR Code
(HDMI/DVI Input Selection)
CC
HDMI2
Discrete IR Code
(HDMI2 Input Selection)
76
Ratio 4:3
Discrete IR Code
(Only 4:3 Mode)
77
Ratio 16:9
Discrete IR Code
(Only 16:9 Mode)
AF
Ratio Zoom
Discrete IR Code
(Only Zoom Mode)
C4
POWER ON
Discrete IR Code
(Only Power On)
C5
POWER OFF
Discrete IR Code
(Only Power Off)
2A
REVEAL
Remote control Button
BA
PAUSE
Remote control Button
20
TEXT
Remote control Button
B1
STOP
Remote control Button
72
RED
Remote control Button
BD
REC
Remote control Button
71
GREEN
Remote control Button
8F
REW
Remote control Button
63
YELLOW
Remote control Button
8E
FF
Remote control Button
61
BLUE
Remote control Button
7D
MARK
Remote control Button
0A
I/II
Remote control Button
7C
X-STUDIO
Remote control Button
AA
INFO
Remote control Button
9E
LIVE TV
Remote control Button
E1
Remote control Button
B2
GO TO PREV
Remote control Button
E0
Remote control Button
B3
GO TO NEXT
Remote control Button
53
112
Code
(Hexa)
LIST
Remote control Button
PROGRAMMING THE REMOTE CONTROL
The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-controllable devices of other manufacturers.
Note that the remote may not control all models of other brands.
Programming a code into a remote mode
1
2
To find out whether your remote can operate the device without programming, turn on the device such as a
VCR and press the corresponding mode button on the remote.
After that, press the POWER button. If the device is turned off then it responds properly and the remote
need not to be programmed. If not, the remote should be programmed to operate the device. The programming procedures are explained below.
Press the M E N U and M U T E button continuously at the same time for 2 seconds, the current selected
device button will be illuminated.
If you don't press any button for 20 seconds, the light on the mode button will be turned off. In that case,
you have to repeat from step 2.
Enter code numbers using the number button on the remote by referring the code table on the following
pages. When pressing the button, the light blinks. If the device turned off, the programming is successful.
4
Press the M E N U button to store the code. After blinking twice, this code is stored.
5
Test the remote functions to see if the device responds properly. If not, repeat from step 2.
APPENDIX
3
113
APPENDIX
PROGRAMMING CODES
VCRs
Brand
AIWA
AKAI
APPENDIX
114
Codes
034
016
125
AMPRO
072
ANAM
031
AUDIO DYNAMICS 012
BROKSONIC
035
CANON
028
CAPEHART
108
CRAIG
003
CURTIS MATHES 031
DAEWOO
005
065
112
DAYTRON
108
DBX
012
DYNATECH
034
ELECTROHOME 059
EMERSON
006
029
036
129
FISHER
003
FUNAI
034
GE
031
107
GO VIDEO
132
HARMAN KARDON
HITACHI
004
043
INSTANTREPLAY 031
JCL
031
JCPENNY
012
040
JENSEN
043
JVC
012
048
130
KENWOOD
014
047
LG (GOLDSTAR) 001
101
LLOYD
034
LXI
003
017
MAGIN
040
Brand
Codes
Brand
MAGNAVOX
031
067
012
069
101
027
031
003
033
101
045
013
013
049
151
034
024
012
048
043
053
066
133
SAMSUNG
043 046 124
146
MARANTZ
033
023
037
031
103
039 043
129
033
MARTA
MATSUI
MEI
MEMOREX
040
033
007
108
116
135
041
010 064
110 111
117 119
MGA
MINOLTA
MITSUBISHI
023 039 043
053
017
031
037
131
008
025
034
046
138
009
033
109
136
012
018
063
033
033
013
066
063 072
144 147
031
050
150
034
048
012
106
027
035
101
153
010
045
026 034
137 150
015 033
101
033 043
055 060
152
039 043
MTC
MULTITECH
NEC
NORDMENDE
OPTONICA
PANASONIC
PENTAX
PHILCO
PHILIPS
PILOT
PIONEER
PORTLAND
PULSAR
QUARTZ
QUASAR
RCA
REALISTIC
013 020
114 123
009 013 014
034 101 106
RICO
RUNCO
SALORA
013
063
031
031
067
101
013
108
072
011
033
013
040
107
145
003
031
053
058
148
014
033 034 041
068
031 033 067
030
033
010
034
102
046
020
020
051
014 031
053 072
134 139
059
045 046
059 061
040
034
023 039 043
054
070 074 083
140 145
020 031 033
034 067
033 034 054
071 101
021 048
014
066
020
041
109
147
008
033
054
075
033
062
140
145
034
063
144
010 014
034 040
101
Codes
032
105
113
125
SANSUI
022
SANYO
003
102
SCOTT
017
131
SEARS
003
013
031
101
SHARP
031
SHINTOM
024
SONY
003
056
077
SOUNDESIGN
034
STS
013
SYLVANIA
031
067
SYMPHONIC
034
TANDY
010
TATUNG
039
TEAC
034
TECHNICS
031
TEKNIKA
019
101
THOMAS
034
TMK
006
TOSHIBA
008
059
TOTEVISION
040
UNITECH
040
VECTOR RESEARCH 012
VICTOR
048
VIDEO CONCEPTS 012
VIDEOSONIC
040
WARDS
003
031
053
YAMAHA
012
ZENITH
034
058
040 102 104
107 109 112
115 120 122
043 048 135
007 010 014
134
037 112 129
008 009 010
014 017 020
042 073 081
054 149
009 031 052
057 058 076
078 149
033 034 059
034
043
039 043
033 070
031 033 034
013 042 047
082 112 131
101
034 046
013
033
054
034
048
072
017
034
131
039
056
080
024
040
043
101
VCRs
Brand
Codes
ABC
003
046
AJIN
112
ANTRONIK
014
ARCHER
005
CABLE STAR
026
CENTURION
092
CENTURY
007
CITIZEN
007
COLOUR VOICE 065
COMBANO
080
COMTRONICS
019
DIAMOND
023
EAGLE
020
EASTERN
057
ELECTRICORD
032
GE
072
GEMINI
008
GI
052
GOLDEN CHANNEL 030
HAMLIN
049
HITACHI
052
HOSPITALITY
070
JERROLD
002
009
004 039 042
052 053
007 014 024
Brand
LG (GOLDSTAR)
M-NET
MACOM
MAGNAVOX
MEMOREX
MOVIE TIME
NSC
090
081
030
OAK
PANASONIC
PARAGON
030 040
062 066
PHILIPS
022 025 054
074
050 055
055
077
003 004 008
010 052 069
Codes
Brand
074
001
037
033
010
100
028
015
073
016
044
100
REMBRANT
025
SAMSUNG
102 107 030
SCIENTIFIC ATLANTA 003 011 041
043 045 046
SHERITECH
022
SIGNAL
030
SIGNATURE
052
SL MARX
030
SPRUCER
047 078
STARCOM
002 004 008
STARGATE
008 030
TADIRAN
030
TAEKWANG
110
TAIHAN
105
TANDY
017
TEXSCAN
029
TOCOM
039 040 056
TOSHIBA
100
UNIKA
007 014 024
UNITED CABLE
004 053
UNIVERSAL
005 007 014
026 027 032
VIEWSTAR
012 015 018
087 088 089
ZENITH
100 114 060
006
065
PIONEER
034
076
POST NEWS WEEK016
PRUCER
059
PTS
011
073
PULSAR
100
RCA
047
REGAL
049
REGENCY
057
106 101 005
012 064 079
032
028 038 071
031 037 053
047
012 013 020
085 090
051 052 063
048 071 072
074
050
Codes
068
042
009
024
035
086
093
APPENDIX
DVD
Brand
Codes
APEX DIGITAL
022
DENON
020
GE
005
HARMAN KARDON
JVC
012
LG
001
MAGNAVOX
013
MARANTZ
024
014
006
027
010 016 025
Brand
Codes
Brand
Codes
MITSUBISHI
NAD
ONKYO
PANASONIC
PHILIPS
PIONEER
PROCEED
PROSCAN
002
023
008
003
013
004
021
005
RCA
SAMSUNG
SONY
THOMPSON
TOSHIBA
YAMAHA
ZENITH
005
011
007
005
019
009
010
017
009
026
006
015
006
008
018
016 025
006
115
APPENDIX
TROUBLESHOOTING CHECKLIST
The operation does not work normally.
Check to see if there is any object between the product and the remote control
causing obstruction. Ensure you are pointing the remote control directly at the TV.
■ Ensure that the batteries are installed with correct polarity (+ to +, - to -).
■ Ensure that the correct remote operating mode is set: TV, VCR etc.
■ Install new batteries.
■
The remote control
doesn’t work
Power is suddenly
turned off
Is the sleep timer set?
■ Check the power control settings. Power interrupted
■ No broadcast on station tuned with Auto off activated.
■
The operation does not work normally.
Check whether the product is turned on.
Try another channel. The problem may be with the broadcast.
■ Is the power cord inserted into wall power outlet?
■ Check your antenna direction and/or location.
■ Test the wall power outlet, plug another product’s power cord into the outlet
where the product’s power cord was plugged in.
■
■
No picture &No sound
APPENDIX
Picture appears slowly
after switching on
This is normal, the image is muted during the product startup process. Please
contact your service center, if the picture has not appeared after five minutes.
Adjust Color in menu option.
■ Keep a sufficient distance between the product and the VCR.
■ Try another channel. The problem may be with the broadcast.
■ Are the video cables installed properly?
■ Activate any function to restore the brightness of the picture.
■
No or poor color
or poor picture
Horizontal/vertical bars
or picture shaking
Poor reception on
some channels
Lines or streaks
in pictures
116
■
■
Check for local interference such as an electrical appliance or power tool.
■
Station or cable product experiencing problems, tune to another station.
Station signal is weak, reorient antenna to receive weaker station.
■ Check for sources of possible interference.
■ Check antenna (Change the direction of the antenna).
■
The audio function does not work.
Press the VOL or VOLUME button.
■ Sound muted? Press MUTE button.
■ Try another channel. The problem may be with the broadcast.
■ Are the audio cables installed properly?
■
Picture OK & No sound
No output from one
of the speakers
Unusual sound from
inside
the product
■
Adjust Balance in menu option.
■
A change in ambient humidity or temperature may result in an unusual noise
when the product is turned on or off and does not indicate a fault with the
product.
There is a problem in PC mode. (Only PC mode applied)
The signal is out of range
Screen color is unstable
or single color
Adjust resolution, horizontal frequency, or vertical frequency.
Check the input source.
■
Work the Auto configure or adjust clock, phase, or H/V position. (Option)
■
Check the signal cable.
Reinstall the PC video card.
■
APPENDIX
Vertical bar or stripe on
background &
Horizontal Noise &
Incorrect position
■
■
117
APPENDIX
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can
enjoy your new TV.
Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then
use it to wipe the screen.
1
Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
2
Cleaning the Cabinet
■
■
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
Please be sure not to use a wet cloth.
Extended Absence
CAUTION
G
APPENDIX
118
If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug
the power cord to protect against possible damage from lightning or power surges.
PRODUCT SPECIFICATIONS
50PB2DR
(50PB2DR-AC)
MODELS
54.4 x 35.9x 14.8 inches
41.5 x 32.0 x 11.9 inches
1382.0 x 913.0 x 377.0mm
1054.0 x 813.0 x 302.0 mm
54.4 x 33.4 x 4.9 inches
41.5 x 29.4x 5.4 inches
1382.0 x 848.5 x 125.0 mm
1054.0 x 746.0 x 136.8 mm
including stand
134.59 pounds / 61.05kg
90.95 pounds / 41.2 kg
excluding stand
105.93 pounds / 48.05 kg
76.4 pounds / 34.6 kg
Including stand
Dimensions
(Width x Height x Depth)
Weight
42LC2DR
(42LC2DR-AC)
Excluding stand
Power requirement
AC100-240V ~ 50/60Hz
Television System
PAL B/G, DVB-T
Program Coverage
VHF 0-12, UHF 20-75, CATV 02-44, DTV 06-12, 27-69
External Antenna Impedance
75 ohm
Operating Temperature
Environment condition
32 ~ 104°F (0 ~ 40°C)
Operating Humidity
Less than 80%
Storage Temperature
-4 ~ 140°F (-20 ~ 60°C)
Storage Humidity
42LB2DE
(42LB2DE-AA)
MODELS
1175.0 x 768.0 x 300.0mm
1280.0 x 828.0 x 315.0 mm
46.3 x 26.4 x 5.7 inches
50.0 x 28.3x 5.3 inches
1175.0 x 670.0 x 143.8 mm
1280.0 x 718.0 x 135.0 mm
including stand
96.3 pounds / 43.7kg
129.9 pounds / 58.9 kg
excluding stand
76.9 pounds / 34.9 kg
104.5 pounds / 47.4 kg
Excluding stand
Power requirement
AC100-240V ~ 50/60Hz
Television System
PAL B/G, DVB-T
Program Coverage
VHF 0-12, UHF 20-75, CATV 02-44, DTV 06-12, 27-69
External Antenna Impedance
75 ohm
Operating Temperature
Environment condition
32 ~ 104°F (0 ~ 40°C)
Operating Humidity
Less than 80%
Storage Temperature
-4 ~ 140°F (-20 ~ 60°C)
Storage Humidity
■
APPENDIX
50.0 x 32.6 x 12.4 inches
Dimensions
Weight
47LB2DE
(47LB2DE-AA)
46.3 x 30.2x 11.8 inches
Including stand
(Width x Height x Depth)
Less than 85%
Less than 85%
The specifications shown above may be changed without prior notice for quality improvement.
119
Download PDF

advertising