LG | 42LG61YD | LG 42LG61YD Owner’s Manual

LCD TV
OWNER’S MANUAL
LCD TV MODELS
2 6 L G 3* * *
3 2 L G 3* * *
3 7 L G 3* * *
4 2 L G 3* * *
3 2 L G 5* * *
4 2 L G 5* * *
4 7 L G 5* * *
DVB is a registered trademark
of the DVB Project
I D N u m b e r ( s ) : 5281: 26LG30D-AA
5282: 32LG30D-AA
5283: 37LG30D-AA
5284: 42LG30D-AA
5583: 32LG50FD-AD
5524: 47LG50FD-AD
5525: 42LG50FD-AD
5463: 47LG50FD-AA
5464: 42LG50FD-AA
5285: 32LG60UD-AA
5461: 47LG60FD-AA
5462: 42LG60FD-AA
5459: 42LG61YD-AC
5582: 47LG61YD-AC
5457: 52LG65YD-AC
5458: 47LG65YD-AC
5454: 52LG70YD-AA
5455: 47LG70YD-AA
5456: 42LG70YD-AA
3 2 L G 6* * *
4 2 L G 6* * *
4 7 L G 6* * *
5 2 L G 6* * *
4 2 L G 7* * *
4 7 L G 7* * *
5 2 L G 7* * *
Please read this manual carefully before operating
your TV.
Retain it for future reference.
Record model number and serial number of the TV.
Refer to the label on the back cover and quote this
information.
To your dealer when requiring service.
ACCESSORIES
Ensure that the following accessories are included with your TV.
■
If an accessory is missing, please contact the dealer where you purchased the TV.
■
Image shown may differ from your TV.
Owner’s Manual
ACCESSORIES
■
Power Cord
Batteries
This feature is not available for all models.
* Lightly wipe any stains or fingerprints on
the surface of the TV with the polishing
cloth.
Polishing Cloth
Polishing cloth for use on
the screen.
Do not use excessive force. This may cause
scratching or discolouration.
Remote Control
Only 32/42/47/52LG6***
(32LG6*** only)
3EA
Cable management clip
Protection cover
(Refer to p.12)
4EA
bolts for stand assembly
(Refer to p. 8)
Only 26/32/37/42LG3***, 32/42/47LG5***, 42/47/52LG7***
(26/32/42LG3***, 32/42LG5*** only)
(26/32/37LG3*** only)
x4
or
x4
Bolts for stand assembly
(Refer to p.9)
1-screw for stand fixing
(Refer to p.9)
Protection Cover
(Refer to p.12)
1
CONTENTS
ACCESSORIES
............................................
1
PREPARATION
CONTENTS
Front Panel Controls..................................................... 4
Back Panel Information ................................................ 6
Stand Installation........................................................... 8
Attaching the TV to a Desk......................................... 9
Please set it up carefully so the product
doesn’t fall over............................................................ 10
Back Cover for Wire Arrangement........................... 11
Swivel Stand ................................................................. 11
Not Using the Desk-type Stand ............................. 12
Desktop Pedestal Installation ................................... 13
Wall Mount: Horizontal Installation ........................ 13
Antenna Connection................................................... 14
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup ...................................................... 15
DVD Setup..................................................................... 18
VCR Setup..................................................................... 21
AV Output Setup ........................................................ 23
Digital Audio Out Setup............................................ 24
Other A/V Source Setup .......................................... 25
Usb in Setup................................................................. 25
PC Setup........................................................................ 26
- Screen Setup for PC Mode .............................. 29
WATCHING TV / PROGRAMME CONTROL
Remote Control Key Functions ............................... 34
Turning on the TV....................................................... 36
Programme Selection ................................................ 36
Volume Adjustment ................................................... 36
Quick Menu ................................................................. 37
On-Screen Menus Selection and Adjustment..... 38
Auto Programme Tuning............................................ 39
Manual Programme Tuning (In Digital Mode)..... 40
Manual Programme Tuning (In Analogue Mode) ... 41
Programme Edit ........................................................... 43
Booster........................................................................... 46
Software Update.......................................................... 47
2
Diagnostics ................................................................... 48
Selecting the Programme Table............................... 49
Input List........................................................................ 50
................................................................. 51
Input Label .................................................................... 53
AV Mode........................................................................ 54
TO USE THE USB DEVICE
When connecting the USB device.......................... 55
Photo List ...................................................................... 56
Music List........................................................................60
EPG (ELECTRONIC PROGRAMME
GUIDE) (IN DIGITAL MODE)
- Switch on/off EPG ............................................... 63
- Select Programme ................................................ 63
- Button Function in NOW/NEXT Guide Mode 64
- Button Function in 7 Day Guide Mode.......... 64
- Button Function in Date Change Mode......... 64
- Button Function in Extended Description Box . 65
- Button Function in Remind Setting Mode................. 65
- Button Function in Remind List Mode ............. 65
PICTURE CONTROL
Picture Size (Aspect Ratio) Control ...................... 66
Preset Picture Settings
- Picture Mode-Preset............................................ 68
- Auto Colour Tone Control
(Cool/Medium/Warm) ........................................ 69
Manual Picture Adjustment
- Picture Mode-User option................................. 70
- Picture Mode-Expert Control ........................... 71
Picture Improvement Technology........................... 72
Advanced - Film Mode/Real Cinema ..................... 73
Advanced - Black(Darkness) Level.......................... 74
Advanced - Trumotion.................................................75
TruMotion Demo ..........................................................76
Eye Care..........................................................................77
Picture Reset................................................................. 78
Power Indicator..............................................................79
APPENDIX
Auto Volume Leveller.................................................. 80
Preset Sound Settings - Sound Mode ................... 81
Sound Setting Adjustment -User Mode ............... 82
Balance........................................................................... 83
TV Speakers On/ Off Setup..................................... 84
Selecting Digital Audio Out ..................................... 85
Audio Reset................................................................... 86
Stereo Reception
(In Analogue Mode Only)......................................... 87
Speaker Sound Output Selection........................... 87
Troubleshooting........................................................... 98
Maintenance ............................................................. 100
Product Specifications ............................................. 101
Programming the Remote Control ....................... 103
IR Codes ...................................................................... 105
External Control Device Setup ...............................107
CONTENTS
SOUND & LANGUAGE CONTROL
TIME SETTING
Clock Setup .................................................................. 88
Auto On/ Off Timer Setting..................................... 89
Auto Shut-off Setting ................................................. 90
Time Zone Setup......................................................... 91
Sleep Timer Setting..................................................... 91
PARENTAL CONTROL / RATINGS
Set Password & Lock System................................... 92
Block Programme......................................................... 93
Parental Control .......................................................... 94
Key Lock......................................................................... 95
TELETEXT
Switch on/off ............................................................... 96
SIMPLE Text .................................................................. 96
TOP Text........................................................................ 96
FASTEXT ........................................................................ 97
Special Teletext Functions......................................... 97
3
PREPARATION
FRONT PANEL CONTROLS
■
■
Image shown may differ from your TV.
If your TV has a protection film attached, remove the film and then wipe the product with a polishing cloth.
PREPARATION
32/42/47/52LG6***
P
P
PROGRAMME
VOLUME
OK
Intelligent Sensor
OK
Adjusts picture according to the
surrounding conditions
MENU
MENU
INPUT
INPUT
POWER
Remote Control Sensor
Power/Standby Indicator
• Illuminates red in standby mode.
• Illuminates White when the TV is switched on.
Note: You can adjust P o w e r I n d i c a t o r in the
OPTION menu.
Only 42LG61**
Intelligent Sensor
Adjusts picture according to the
surrounding conditions
4
P
26/32/37/42LG3***, 32/42/47LG5***
P
PROGRAMME
VOLUME
-
OK
PREPARATION
+
Intelligent Sensor
Adjusts picture according to the
surrounding conditions.
(32/42/47LG5*** only)
OK
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates blue when the TV is switched on.
Note: You can adjust Power Indicator in the
MENU
MENU
INPUT
INPUT
OPTION menu.
Remote Control Sensor
POWER Button
42/47/52LG7***
P
Intelligent Sensor
Adjusts picture according to the
surrounding conditions.
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates blue when the TV is switched on.
Note: You can adjust Power Indicator in the
OPTION menu.
Remote Control Sensor
PROGRAMME
VOLUME
OK
MENU
INPUT
OK
MENU
INPUT
POWER Button
5
PREPARATION
BACK PANEL INFORMATION
■
Image shown may differ from your TV.
32/42/47/52LG6***
4
PREPARATION
USB Input
HDMI Input
Connect a HDMI signal to
HDMI IN.
S-Video Input
Connect S-Video out from
an S-VIDEO device.
2
3
1
4
RGB IN
VIDEO (RGB/DVI)
AV IN
8
9
AV OUT
AUDIO
VIDEO
AV IN
Audio/Video Input
Connect audio/video
output from an external
device to these jacks.
5
6
2
1
AUDIO
COMPONENT IN
AUDIO
RGB IN(PC)
HDMI/DVI IN
RGB IN
6
1
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
2
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
3
RGB Input
Connect the output from a PC.
4
HDMI Input
Connect a HDMI signal to HDMI IN.
Or DVI(VIDEO)signal to HDMI/DVI port with DVI
to HDMI cable.
5
Component Input
Connect a component video/audio device to
these jacks.
7
6
OPTICAL DIGITAL AUDIO OUT
Connect digital audio from various types of equipment.
Note: In standby mode, these ports do not work.
7
Antenna Input
Connect RF antenna to this jack.
8
RGB/DVI Audio Input
Connect the audio from a PC.
9
AV OUT
Connect second TV or monitor to the AV OUT
socket on the set.
Image shown may differ from your TV.
42/47/52LG7***
26/32/37/42LG3***, 32/42/47LG5***
USB
3 SERVICE ONLY
■
USB Input
(Service only)
PREPARATION
3
USB Input
HDMI Input
Connect a HDMI signal
to HDMI IN.
S-Video Input
Connect S-Video out
from an S-VIDEO device.
2
RGB(PC)
AUDIO
(RGB/DVI)
HDMI/DVI IN
DIGITAL VIDEO OUT
AUDIO OUT
AUDIO OUT
1
(DVI)
AV IN 1
2
2
1
VIDEO
AUDIO
5
RGB IN
RGB(PC)
2
1
(DVI)
1
COMPONENT IN
6
5
AV IN 2
1
2
3
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
HDMI Input
Connect a HDMI signal to HDMI IN.
Or DVI(VIDEO)signal to HDMI/DVI port with DVI
to HDMI cable.
RGB/Audio Input
Connect the monitor output from a PC to the
appropriate input port.
4
Antenna Input
Connect RF antenna to this jack.
5
Component Input
Connect a component video/audio device to
these jacks.
6
9
OPTICAL
AUDIO
VIDEO
8
DIGITAL VIDEO OUT
AUDIO OUT
RS-232C IN
(CONTROL & SERVICE)
2
7
6
AUDIO
(RGB/DVI)
HDMI/DVI IN
VIDEO
COMPONENT IN
4
ANTENNA IN
8
9
OPTICAL
RS-232C IN
(CONTROL & SERVICE)
3
2
ANTENNA IN
RGB IN
AV IN 2
26/32/37/42LG3***, 32/42/47LG5***
4
3
AV IN 1
42/47/52LG7***
AV IN 2
AV IN 2
AV IN 2
1
Audio/Video Input
Connect audio/video
output from an external
device toAVthese
jacks.
IN 2
AUDIO OUT
VIDEO
7
AV IN 2
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
7
Audio/Video Input(AV IN 1)
Connect audio/video output from an external
device to these jacks.
8
OPTICAL DIGITAL AUDIO OUT
Connect digital audio from various types of equipment.
Note: In standby mode, these ports do not work.
9
AUDIO/VIDEO OUT
Connect second TV or monitor to the
AUDIO/VIDEO OUT socket on the set.
(
)
7
(
)
(
)
PREPARATION
STAND INSTALLATION (Only 32LG6***)
■
Image shown may differ from your TV.
When assembling the desk type stand, check whether the bolt is fully tightened.
(If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with
excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.
PREPARATION
1
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
3
Assemble the TV as shown.
2
Assemble the parts of the S t a n d B o d y with
C o v e r B a s e of the TV.
4
Fix the 4 bolts securely using the holes in the
back of the TV.
Stand Body
Cover Base
8
(Only 26/32/37LG3***)
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
3
Assemble the TV as shown.
2
Assemble the parts of the S t a n d B o d y with
the C o v e r B a s e of the TV.
4
Fix the 4 bolts securely using the holes in the
back of the TV.
PREPARATION
1
Stand Body
Cover Base
ATTACHING THE TV TO A DESK (Only 26/32/42LG3***, 32/42LG5***)
The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing
injury or damaging the product. Use only an attached screw.
Stand
1-Screw
(provided as parts of the product)
Desk
! WARNING
G
To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation
instructions. Tipping, shaking, or rocking the machine may cause injury.
9
PREPARATION
PLEASE SET IT UP CAREFULLY SO THE PRODUCT
DOESN’T FALL OVER.
You should purchase necessary components to fix the TV to the wall on the market.
Position the TV close to the wall to avoid the possibility of it falling when pushed.
A The instructions shown below are a safer way to set up the TV, which is to fix it to the wall, avoiding the
possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury.
This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.
A
A
PREPARATION
1
1
2
2
1
Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen then bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
2
Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the
wall.
3
3
Use a sturdy rope to tie the product. It is safer to tie the rope so it becomes horizontal between
the wall and the product.
! NOTE
G
G
G
10
When moving the TV undo the cords first.
Use a platform or cabinet strong and large enough to support the size and weight of the TV.
To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.
BACK COVER FOR WIRE ARRANGEMENT
■
Image shown may differ from your TV.
32/42/47/52LG6***
1
PREPARATION
2
Align the hole with the tab on the C A B L E M A N A G E M E N T C L I P.
Turn the C A B L E M A N A G E M E N T C L I P as shown.
Note: This cable management can be broken by excessive pressure.
Connect the cables as necessary.
To connect additional equipment, see the E x t e r n a l E q u i p m e n t S e t u p section.
SWIVEL STAND
This feature is not available for all models.
After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit
your viewing position.
11
PREPARATION
26/32/37/42LG3***, 32/42/47LG5***, 42/47/52LG7***
Connect the cables as necessary.
To connect additional equipment, see the
External Equipment Setup section of the manual.
2
Open the C A B L E M A N A G E M E N T C L I P as
shown and manage the cables.
3
Fit the C A B L E M A N A G E M E N T C L I P as
shown.
PREPARATION
1
CABLE MANAGEMENT CLIP
NOT USING THE DESK-TYPE STAND
When installing the wall-mounted unit, use the protection cover for desk-type stand installation.
■ Image shown may differ from your TV.
32/42/47/52LG6***
After removing the protection paper from the
protection cover, adhere it to the TV as shown.
12
26/32/37/42LG3***,
32/42/47LG5***, 42/47/52LG7***
Insert the P R O T E C T I O N C O V E R into the TV
until clicking sound.
A
A
The TV can be installed in various ways such as on a wall, or on a desktop etc.
The TV is designed to be mounted horizontally.
EARTHING
Ensure that you connect the earth wire to prevent possible
electric shock. If grounding methods are not possible, have a
qualified electrician install a separate circuit breaker.
Do not try to earth the TV by connecting it to telephone
wires, lightening rods or gas pipes.
Power Supply
PREPARATION
Circuit breaker
DESKTOP PEDESTAL INSTALLATION
For adequate ventilation allow a clearance of 4” (10cm) all around the TV.
4 inches
4 inches
4 inches
4 inches
WALL MOUNT: HORIZONTAL INSTALLATION
For adequate ventilation allow a clearance of 4” (10cm) all around the TV. We recommend that you
use a wall mounting bracket of LG brand when mounting the TV to a wall.
4 inches
4 inches
4 inches
4 inches
4 inches
13
PREPARATION
■
To prevent damage do not connect to the mains outlet until all connections are made between the devices.
ANTENNA CONNECTION
■
■
For optimum picture quality, adjust antenna direction.
An antenna cable and converter are not supplied.
A
PREPARATION
Wall
Antenna
Socket
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
RF Coaxial Wire (75 ohm)
Outdoor
Antenna
(VHF, UHF)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
UHF
Antenna
Signal
Amplifier
VHF
■
■
14
In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the
antenna as shown above.
If signal needs to be split for two TVs, use an antenna signal splitter for connection.
EXTERNAL EQUIPMENT SETUP
To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.
This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 42LG6***/42LG7*** model.
■
■
Image shown may differ from your TV.
■
HD RECEIVER SETUP
■
This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive
Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.
Connecting with a component cable
Connect the video outputs (Y, PB, PR) of the digital set
top box to the C O M P O N E N T I N V I D E O jacks on the TV.
2
Connect the audio output of the digital set-top box to
the C O M P O N E N T I N A U D I O jacks on the TV.
3
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
4
Select C o m p o n e n t 1 input source using the I N P U T button on the remote control.
If connected to C O M P O N E N T I N 2 input, select C o m p o n e n t 2 input source.
EXTERNAL EQUIPMENT SETUP
1
1
VIDEO
AUDIO
COMPONENT IN
or
AUDIO
1
VIDEO
COMPONENT IN
2
1
2
1
2
Signal
Component
HDMI
480i/576i
Yes
No
480p/576p
Yes
Yes
720p/1080i
Yes
Yes
1080p
Yes
Yes
(50/60Hz only)
(24Hz/30Hz/50Hz/60Hz)
2
15
EXTERNAL EQUIPMENT SETUP
Connecting a set-top box with an HDMI cable
EXTERNAL EQUIPMENT SETUP
1
Connect the digital set-top box to H D M I / D V I I N 1,
H D M I I N 2, H D M I I N 3 or H D M I I N 4(only
32/42/47/52LG6***) jack on the TV.
2
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
3
Select H D M I 1, H D M I 2, H D M I 3 or H D M I 4(only
32/42/47/52LG6***) input source using the I N P U T
button on the remote control.
HDMI/DVI IN
HDMI/DVI IN
2
1
(DVI)
or
1
1
16
Connecting with an HDMI to DVI cable
Connect the digital set-top box to H D M I / D V I I N 1 jack on the TV.
2
Connect the audio output of the digital set-top box to the A U D I O ( R G B / D V I ) jack on the TV.
3
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
4
Select H D M I 1 input source using the I N P U T button on the remote control.
RGB IN
AU
O
AUDIO
(RGB/DVI)
RGB(PC)
HDMI/DVI IN
B IN
HDMI/DVI IN
1
(DVI)
RGB IN
AV OUT
AUDIO
VIDEO (RGB/DVI)
Y
AUDIO
(C
2
2
PB
EXTERNAL EQUIPMENT SETUP
1
PR
L
R
1
AUDIO
VIDEO
COMPONENT IN
2
1
or
2
2
1
17
EXTERNAL EQUIPMENT SETUP
DVD SETUP
Connecting with a component cable
1
Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O jacks on the TV.
2
Connect the audio outputs of the DVD to the
C O M P O N E N T I N A U D I O jacks on the TV.
EXTERNAL EQUIPMENT SETUP
3
Turn on the DVD player, insert a DVD.
4
Select C o m p o n e n t 1 input source using the I N P U T button on the remote control.
If connected to C O M P O N E N T I N 2 input, select C o m p o n e n t 2 input source.
5
Refer to the DVD player's manual for operating instructions.
2
1
AUDIO
VIDEO
or
AUDIO
1
VIDEO
COMPONENT IN
COMPONENT IN
1
2
2
1
2
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV
Video output ports
on DVD player
18
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
Connecting with a S-Video cable
Connect the S-VIDEO output of the DVD to the S V I D E O input on the TV.
2
Connect the audio outputs of the DVD to the A U D I O
input jacks on the TV.
3
Turn on the DVD player, insert a DVD.
4
Select A V input source using the I N P U T button on
the remote control.
5
Refer to the DVD player's manual for operating instructions.
VIDEO
S-VIDEO
L
R
OUTPUT
SWITCH
1
ANT IN
ANT OUT
2
EXTERNAL EQUIPMENT SETUP
1
AV
V IN
19
EXTERNAL EQUIPMENT SETUP
Connecting the HDMI cable
1
Connect the HDMI output of the DVD to the
H D M I / D V I I N 1, H D M I I N 2, H D M I I N 3 or H D M I
I N 4(only 32/42/47/52LG6***) jack on the TV.
EXTERNAL EQUIPMENT SETUP
2
Select H D M I 1, H D M I 2, H D M I 3 or H D M I 4(only
32/42/47/52LG6***) input source using the I N P U T
button on the remote control.
3
Refer to the DVD player's manual for operating
instructions.
! NOTE
G The
TV can receive video and audio signals simultaneously when using a HDMI cable.
G If the DVD does not support Auto HDMI, you must set
the output resolution appropriately.
HDMI/DVI IN
HDMI/DVI IN
2
1
(DVI)
or
1
1
20
VCR SETUP
To avoid picture noise (interference), allow adequate distance between the VCR and TV.
■ Typically a frozen still picture from a VCR. If 4:3 picture format is used for an extended period the fixed
images on the sides of the screen may remain visible.
■
Connecting with a RF Cable
S-VIDEO
ANT IN
OUTPUT
SWITCH
VIDEO
L
EXTERNAL EQUIPMENT SETUP
ANT OUT
R
1
Wall Jack
2
or
Antenna
ANTENNA IN
ANT OUT
S-VIDEO
ANT IN
OUTPUT
SWITCH
VIDEO
L
R
1
VIDEO OUT
IN
ERVICE)
VIDEO
AUDIO OUT
Wall Jack
/MONO
AUDIO
2
Antenna
1
Connect the A N T O U T socket of the VCR to the A N T E N N A I N socket on the TV.
2
Connect the antenna cable to the A N T I N socket of the VCR.
3
Press the P L A Y button on the VCR and match the appropriate channel between the TV and VCR for
viewing.
AV IN
21
EXTERNAL EQUIPMENT SETUP
Connecting with a RCA cable
EXTERNAL EQUIPMENT SETUP
1
V I D E O jacks between TV and
Connect the A U D I O/V
VCR. Match the jack colours (Video = yellow, Audio Left
= white, and Audio Right = red)
2
Insert a video tape into the VCR and press PLAY on
the VCR. (Refer to the VCR owner’s manual.)
3
Select A V input source using the I N P U T button on
the remote control.
AV
V IN
! NOTE
G
S-VIDEO
If you have a mono VCR, connect the audio cable from the
VCR to the A U D I O L / M O N O jack of the TV.
L
R
OUTPUT
SWITCH
VIDEO
Connect the S-VIDEO output of the VCR to the S V I D E O input on the TV set. The picture quality is
improved; compared to normal composite (RCA cable)
input.
ANT IN
ANT OUT
2
Connect the audio outputs of the VCR to the A U D I O
input jacks on the TV.
3
Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
4
Select A V input source with using the I N P U T button on
the remote control.
! NOTE
G
If both S-VIDEO and VIDEO sockets have been connected to
the S-VHS VCR simultaneously, only the S-VIDEO can be
received.
S-VIDEO
L
R
OUTPUT
SWITCH
1
AV
V IN
22
VIDEO
Connecting with a S-Video cable
1
AV IN
1
ANT IN
ANT OUT
2
AV OUTPUT SETUP
The TV has a special signal output capability which allows you
to hook up the second TV or monitor.
Connect the second TV or monitor to the TV’s AV OUT
jacks.
2
See the Operating Manual of the second TV or monitor
for further details regarding that device’s input settings.
EXTERNAL EQUIPMENT SETUP
1
! NOTE
G
G
Component, RGB, HDMI input sources cannot be used for
AV out.
We recommend to use the AV OUT jacks for VCR recording.
RGB IN
1
RS-232C IN
(CONTROL & SERVICE)
AUDIO OUT
R
or
AUDIO
AV IN 1
VIDEO (RGB/DVI)
DIGITAL VIDEO OUT
AUDIO OUT
OPTICAL
I)
AV OUT
AUDIO
AUDIO
ANTENNA IN
VIDEO
/MONO
AUDIO
1
VIDEO
L
R
S-VIDEO
S-VIDEO
VIDEO
L
R
23
EXTERNAL EQUIPMENT SETUP
DIGITAL AUDIO OUT SETUP
A
Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port.
Connect one end of an optical cable to the TV Digital
Audio (Optical) Output port.
1
EXTERNAL EQUIPMENT SETUP
2
Connect the other end of the optical cable to the digital audio (Optical) input on the audio equipment.
3
Set the “TV Speaker option - Off ” in the AUDIO
menu.(Gp .84). Refer to the external audio equipment
instruction manual for operation.
1
2
CAUTION
G Do
not look into the optical output port. Looking at the
laser beam may damage your vision.
or
! NOTE
G
When connecting with external audio equipments, such as
amplifiers or speakers, please turn the TV speakers off.
ANTENNA IN
IN
DIGITAL VIDEO OUT
AUDIO OUT
AUDIO
(RGB/DVI)
OPTICAL
RS-232C IN
(CONTROL & SERVICE)
AUDIO OUT
2
R
1
AUDIO
1
ONENT IN
2
24
AV IN 1
L
R
VIDEO
/MONO
AUDIO
OTHER A/V SOURCE SETUP
Camcorder
Video Game Set
VIDEO
L
R
AV
V IN
1
V I D E O jacks between TV and external equipment. Match the jack colours .
Connect the A U D I O/V
(Video = yellow, Audio Left = white, and Audio Right = red)
2
Select A V input source with using the I N P U T button on the remote control.
3
Operate the corresponding external equipment.
Refer to external equipment operating guide.
EXTERNAL EQUIPMENT SETUP
1
USB IN SETUP
Only 32/42/47/52LG6***, 42/47/52LG7***
1
Connect the USB device to the U S B I N jacks on the
side of TV.
1
2
After connecting the U S B I N jacks, you use the U S B
function. (G p .55)
25
EXTERNAL EQUIPMENT SETUP
PC SETUP
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
Connecting with a D-sub 15 pin cable
EXTERNAL EQUIPMENT SETUP
1
Connect the RGB output of the PC to the R G B I N
( P C ) jack on the TV.
2
Connect the PC audio output to the A U D I O
( R G B / D V I ) jack on the TV.
3
Turn on the PC and the TV
4
Select R G B input source using the INPUT button on
the remote control.
RGB IN
HDMI/DVI IN
RGB IN
RGB IN(PC)
HDMI/DVI IN
RGB IN
2
1
RS
(CONTR
2
Y
PB
1
(DVI)
PR
1
AUDIO
RGB IN
VIDEO (RGB/DVI)
AV OUT
AUDIO
AUDIO
COMPONENT IN
or
2
2
2
1
AUDIO
R
L
VIDEO
RGB OUTPUT
RGB OUTPUT
26
DIGITA
AUDIO
OPTIC
AUDIO
(RGB/DVI)
RGB(PC)
AUDIO
Connecting with a HDMI to DVI cable
2
Connect the PC audio output to the A U D I O
( R G B / D V I ) jack on the TV.
3
Turn on the PC and the TV.
4
Select H D M I 1 input source using the INPUT button
on the remote control.
RGB IN
RGB(PC)
HDMI/DVI IN
B IN
HDMI/DVI IN
RGB IN
VIDEO (RGB/DVI)
1
(DVI)
PB
PR
R
L
1
AUDIO
VIDEO
COMPONENT IN
AV OUT
AUDIO
1
RS-232C IN
(CONTROL & SERVICE)
2
2
Y
AUDIO
DIGITAL VIDEO OU
AUDIO OUT
OPTICAL
AUDIO
(RGB/DVI)
AV IN 1
Connect the DVI output of the PC to the H D M I / D V I
I N 1 jack on the TV.
EXTERNAL EQUIPMENT SETUP
1
VIDEO
2
or
2
1
AUDIO
DVI-PC OUTPUT
DVI-PC OUTPUT
AUDIO
27
EXTERNAL EQUIPMENT SETUP
Supported Display Resolution
RGB-PC, HDMI-PC mode
EXTERNAL EQUIPMENT SETUP
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
720x400
31.468
70.08
640x480
31.469
59.94
800x600
37.879
60.31
48.363
60.00
1024x768
56.470
70.00
1280x768
47.78
59.87
1360x768
47.72
59.8
1366x768
1280x1024
47.56
59.6
63.595
60.0
1920x1080
66.647
59.988
Only 42/47LG6***, 32/42/47LG5***, 42/47/52LG7***
! NOTE
G To
enjoy vivid picture and sound, connect a PC to the
TV.
G Avoid keeping a fixed image on the set’s screen for
prolonged periods of time. The fixed image may
become permanently imprinted on the screen; use a
screen saver when possible.
G Connect the PC to the RGB (PC) or HDMI IN (or
HDMI/DVI IN) port of the TV; change the resolution.
G There may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode.
Change the PC mode to another resolution or change
the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is
clear. If the refresh rate of the PC graphic card can not
be changed, change the PC graphic card or consult
the manufacturer of the PC graphic card.
G The synchronization input waveform for Horizontal
and Vertical frequencies are separate.
G Connect the signal cable from the monitor output
port of the PC to the RGB (PC) port of the TV or the
signal cable from the HDMI output port of the PC to
the HDMI IN (or HDMI/DVI IN) port on the TV.
G Connect the audio cable from the PC to the Audio
input on the TV. (Audio cables are not included with
the TV).
28
G If
using a sound card, adjust PC sound as required.
TV uses a VESA Plug and Play Solution. The TV
provides EDID data to the PC system with a DDC protocol. The PC adjusts automatically when using this
TV.
G DDC protocol is preset for RGB (Analogue RGB),
HDMI (Digital RGB) mode.
G If required, adjust the settings for Plug and Play functionality
G If the graphic card on the PC does not output analogue and digital RGB simultaneously, connect only
one of either RGB or HDMI IN (or HDMI/DVI IN) to
display the PC output on the TV.
G If graphic card on the PC does output analogue and
digital RGB simultaneously, set the TV to either RGB
or HDMI; (the other mode is set to Plug and Play
automatically by the TV.)
G DOS mode may not work depending on the video
card if you use a HDMI to DVI cable.
G If you use too long an RGB-PC cable, there may be
interference on the screen. We recommend using
under 5m of cable. This provides the best picture
quality.
G This
Screen Setup for PC mode
Screen Reset
Returns Position, Size and Phase to the factory default settings.
This function works in the following mode : RGB[PC].
Move
SCREEN
OK
RETURN Prev.
E
Resolution
• Contrast
50
• Brightness
50
• Sharpness
50
• Colour
50
• Tint
Move
0
Auto Config.
Position
To Set
R
G
Size
• Advanced Control
• Picture Reset
Phase
Screen
Screen
Reset
1 MENU
2
G
EXTERNAL EQUIPMENT SETUP
PICTURE
Select P I C T U R E.
OK
Select S C R E E N.
OK
Select R e s e t.
OK
Select Y e s.
OK
Run R e s e t.
3
4
5
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
29
EXTERNAL EQUIPMENT SETUP
Adjustment for screen Position, Size, Phase
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the
picture phase manually.
This function works in the following mode : RGB[PC].
EXTERNAL EQUIPMENT SETUP
PICTURE
Move
SCREEN
OK
E
• Contrast
50
• Brightness
50
• Sharpness
50
• Colour
50
RETURN Prev.
Move
Resolution
Auto Config.
D
• Tint
0
Position
R
G
F
G
E
G
Size
• Advanced Control
• Picture Reset
Phase
Screen
Screen
Reset
1 MENU
Select P I C T U R E.
2
OK
Select S C R E E N.
OK
Select P o s i t i o n, S i z e or P h a s e.
3
4
Make appropriate adjustments.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
30
Selecting Resolution
To view a normal picture, match the resolution of RGB mode and selection of PC mode.
This function works in the following mode:
RGB[PC](1024/1280/1360/1366x768, 60Hz)
Move
E
• Contrast
Resolution
50
• Sharpness
50
• Tint
G
50
• Brightness
• Colour
Move
Auto Config.
Position
50
0
RETURN Prev.
OK
R
G
1024 x 768
1280 x 768
1360 x 768
1366 x 768
Size
• Advanced Control
• Picture Reset
Phase
Screen
Screen
Reset
1 MENU
2
EXTERNAL EQUIPMENT SETUP
SCREEN
PICTURE
Select P I C T U R E.
OK
Select S C R E E N.
OK
Select R e s o l u t i o n.
3
4
Select the desired resolution.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
31
EXTERNAL EQUIPMENT SETUP
Auto Configure (RGB [PC] mode only)
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still
not correct, your TV is functioning properly but needs further adjustment.
SCREEN
PICTURE
Move
RETURN Prev.
Resolution
• Contrast
50
• Brightness
50
• Sharpness
50
• Colour
50
• Tint
Move
OK
E
EXTERNAL EQUIPMENT SETUP
Auto configure
This function is for automatic adjustment of the screen position, clock, and phase The displayed image will
be unstable for a few seconds while the auto configuration is in progress.
0
Auto Config. G
Position
R
G
To Set
Size
• Advanced Control
• Picture Reset
Phase
Screen
Screen
Reset
1 MENU
Select P I C T U R E.
• If the position of the image is still not correct,
try Auto adjustment again.
2
• If picture needs to be adjusted again after Auto
OK
Select S C R E E N.
OK
Select A u t o C o n f i g ..
adjustment in RGB (PC), you can adjust the
P o s i t i o n, S i z e or P h a s e.
3
4
OK
Select Y e s.
OK
Run A u t o C o n f i g ..
5
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
32
Initializing
(Reset to original factory settings)
This function operates in current mode.
To initialize the adjusted value.
OPTION
Subtitle
Move
OK
: Off
Input Label
OPTION
Subtitle
Move
OK
: Off
Input Label
SIMPLINK
: On
SIMPLINK
: On
Key Lock
: Off
Key Lock
: Off
Set ID
:1
Set ID
: 1 Enter Password
Power Indicator
Power Indicator
Factory Reset
Factory Reset
* * * *
Cancel
1 MENU
2
OK
Select O P T I O N.
EXTERNAL EQUIPMENT SETUP
O n", the message to enter the password appears.
When the L o c k S y s t e m menu is "O
O n", if you forget your password,
• In L o c k S y s t e m "O
press '7', '7', '7', '7' on the remote control handset.
Select F a c t o r y R e s e t.
3
OK
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
33
WATCHING TV / PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
1
MODE Selects the remote operating modes.
POWER Switches the TV on from standby or off to standby.
1
INPUT External input mode rotate in regular sequence.
Switches the TV on from standby.
TV/RAD Selects Radio, TV and DTV channel.
WATCHING TV / PROGRAMME CONTROL
Q. MENU Select the desired quick menu source.
MENU Selects a menu.
Clears all on-screen displays and returns to TV viewing
from any menu.
GUIDE Shows programme schedule.
THUMBSTICK Allows you to navigate the on-screen menus and adjust
(Up/Down/Left the system settings to your preference.
Right)
OK Accepts your selection or displays the current mode.
RETURN(EXIT) Allows the user to move return one step in an interactive application, EPG or other user interaction function.
INFO i Shows the present screen information.
AV MODE It helps you select and set images and sounds when
connecting AV devices.
Coloured These buttons are used for teletext (on T E L E T E X T
buttons models only) , P r o g r a m m e e d i t.
2
2
TELETEXT These buttons are used for teletext.
BUTTONS For further details, see the ‘Teletext’ section.
SUBTITLE Recalls your preferred subtitle in digital mode.
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu appears
at the screen.
34
VOLUME UP Adjusts the volume.
/DOWN
MARK Check and un-check programmes in the USB menu.
FAV Displays the selected favourite programme.
MUTE Switches the sound on or off.
PAGE Move from one full set of screen information to the next
UP/DOWN one.
0~9 number Selects a programme.
button Selects numbered items in a menu.
LIST Displays the programme table.
Q.VIEW Returns to the previously viewed programme.
SIMPLINK / Controls SIMPLINK or USB menu( Photo List and Music
USB Menu List).
control buttons
WATCHING TV / PROGRAMME CONTROL
Programme Selects a programme.
UP/DOWN
Installing Batteries
■
Open the battery compartment cover on the back and install the
batteries matching correct polarity (+with +,-with -).
■
Install two 1.5V AAA batteries. Do not mix old or used batteries
with new ones.
■
Close cover.
35
WATCHING TV / PROGRAMME CONTROL
TURNING ON THE TV
- When your TV is turned on, you will be able to use its features.
1
Firstly, connect the power cord correctly.
At this stage, the TV switches to standby mode.
2
)button on the TV or
In standby mode to turn TV on, press the r / I, INPUT or P D or E(or P
press the POWER, INPUT, P
or NUMBER button on the remote control and the TV will switch on.
Initializing setup
WATCHING TV / PROGRAMME CONTROL
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the
S e l e c t M o d e, T i m e Z o n e , A u t o p r o g r a m m e t u n i n g.
Note:
a. It will automatically disappear after approx. 40 seconds unless a button is pressed.
b. Press the RETURN button to change the current OSD to the previous OSD.
c. For those countries without confirmed DTV broadcasting standards, some DTV features might not
work, depending on the DTV broadcasting environment.
d. "Home” mode is the optimal setting for home environments, and is the TV's default mode.
e. "In-Store" mode is the optimal setting for store environments. If a user modifies image quality data,
“In-Store” mode initializes the product to the image quality set by us after a certain period of time.
(Only 26/32/37LG3***, 32/42/47LG5***, 32LG6***, 42/47LG60**)
f. "In-Store" mode is an optimal setting for a display at stores. “In-Store” mode initializes the product to
the image quality set and operates TruMotion Demo after a certain period of time.
When used at home, select “Home” mode.(Only 42/47LG61**, 47/52LG65**, 42/47/52LG7***)
g. The mode (Home, In-Store) can be changed by executing Factory Reset in the OPTION menu.
PROGRAMME SELECTION
1
Press the P
number.
or NUMBER buttons to select a programme
VOLUME ADJUSTMENT
1
Press the
+ or - button to adjust the volume.
If you wish to switch the sound off, press the MUTE button.
You can cancel this function by pressing the MUTE,
+ or - button.
36
QUICK MENU
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
Q.Menu (Quick Menu) is a menu of features which users might use frequently.
• S o u n d M o d e : It is a feature to automatically set the
For Zoom Setting, select 14:9, Zoom1 and Zoom2 in
Ratio Menu. After completing Zoom Setting, the display goes back to Q.Menu.
• B a c k l i g h t: Adjusts screen brightness.
It returns to the default settings brightness by
changing mode source.
• P i c t u r e M o d e : Selects your desired Picture Mode.
sound combination which it deems the best for the
images being watched. Selects your desired Sound
Mode.
• A u d i o : Selects the sound output.
• S l e e p T i m e r : Sets the sleep timer.
• U S B E j e c t : Select “USB Eject” in order to eject USB
device. (Only 32/42/47/52LG6***, 42/47/52LG7***)
Only 26/32/37/42LG3***,
32/42/47LG5***
Only 32/42/47/52LG6***,
42/47/52LG7***
Q.Menu
Q.Menu
Aspect Ratio
Aspect Ratio
16:9
16:9
Zoom Setting
Zoom Setting
Backlight
F
0
Backlight
G
F
0
Picture Mode
Standard
Picture Mode
Standard
Sound Mode
Standard
Sound Mode
Standard
Audio
Audio
MONO
Sleep Timer
USB Eject
MONO
Sleep Timer
Off
Eject
G
WATCHING TV / PROGRAMME CONTROL
• A s p e c t R a t i o: Selects your desired picture format.
Off
Close
Close
1Q. MENU
Display each menu.
2
OK
3
or
Select your desired Source.
• Press the Q . M E N U button to return to normal TV viewing.
OK
• Press the R E T U R N button to move to the previous menu screen.
37
WATCHING TV / PROGRAMME CONTROL
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
The OSD mainly use pictures for the 42LG60** model.
SETUP
Move
PICTURE
OK
Move
AUDIO
OK
Auto Tuning
Aspect Ratio : 16:9
Auto Volume
Manual Tuning
Picture Mode : Standard
Balance
Programme Edit
• Backlight
80
Sound Mode
Move
OK
: Off
0
L
R
: Standard
Booster
: On
• Contrast
90
• 120Hz
0
-
+
Software Update
: On
• Brightness
50
• 200Hz
0
-
+
• Sharpness
60
• 500Hz
0
-
+
• Colour
60
• 1.2KHz
0
-
+
• 3KHz
0
-
+
Diagnostics
• Tint
0
R
G
E
WATCHING TV / PROGRAMME CONTROL
OPTION
Subtitle
Move
E
TIME
OK
: Off
Input Label
SIMPLINK
Move
OK
Clock
SETUP
: On
PICTURE
AUDIO
TIME
Off Time
: Off
On Time
: Off
Key Lock
: Off
Sleep Timer
: Off
Set ID
:1
Auto Sleep
: Off
Time Zone
: NSW/ACT
Power Indicator
Factory Reset
OPTION
LOCK
Move
Lock System
OK
INPUT
INPUT
Move
USB
OK
USB
Antenna
Photo List
Set Password
AV
Music List
Block Programme
Component1
Parental Guidance
: Off
LOCK
:R
Move
OK
Component2
RGB
HDMI1
HDMI2
HDMI3
E
1 MENU
Display each menu.
2
Only 32/42/47/52LG6***, 42/47/52LG7***
Select a menu item.
OK
• Press the M E N U button to return to normal TV viewing.
3
OK
Move to the pop up menu.
• Press the R E T U R N button to move to the previous menu screen.
! NOTE
G
G
G
38
It is possible to use T r u M o t i o n, T r u M o t i o n D e m o in 4 2 / 4 7 L G 6 1* *, 4 7 / 5 2 L G 6 5* *, 4 2 / 4 7 / 5 2 L G 7* * *
models only.
It is not possible to use B o o s t e r in Analogue mode.
It is not possible to use INPUT and USB menu in 2 6 / 3 2 / 3 7 / 4 2 L G 3* * *, 3 2 / 4 2 / 4 7 L G 5* * * models.
AUTO PROGRAMME TUNING
Use this to automatically find and store all available programmes.
When you start auto programming, all previously stored service information will be deleted.
SETUP
Move
OK
Manual Tuning
Manual Tuning
Programme Edit
Booster
: On
Booster
Software Update
: On
Software Update
Diagnostics
Diagnostics
Select S E T U P.
Move
OK
All service-information will be updated.
Continue?
: On
: Onf
Yes
No
• Use NUMBER buttons to input a 4-digit pass-
O n’.
word in L o c k S y s t e m ‘O
2
• If you wish to keep on auto tuning select Y E S
OK
Select A u t o T u n i n g.
OK
Select Y e s.
OK
Run A u t o t u n i n g.
using the
button. Then, press the OK button. Otherwise select N O.
3
WATCHING TV / PROGRAMME CONTROL
Auto Tuning
Programme Edit
1 MENU
SETUP
Auto Tuning
4
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
39
WATCHING TV / PROGRAMME CONTROL
MANUAL PROGRAMME TUNING (IN DIGITAL MODE)
Manual Tuning lets you manually add a programme to your programme list.
SETUP
Move
SETUP
OK
WATCHING TV / PROGRAMME CONTROL
Auto Tuning
Auto Tuning
Manual Tuning
Manual Tuning
Programme Edit
Programme Edit
Booster
: On
Booster
Software Update
: On
Software Update
Diagnostics
Move
F
OK
DTV
G
Your receiver will add this
channel to your channel list.
: On
: VHF
On CH.
8
Diagnostics
Bad
Normal
Good
ADD
Close
1 MENU
Select S E T U P.
• Use NUMBER buttons to input a 4-digit pass-
O n’.
word in L o c k S y s t e m ‘O
2
OK
Select M a n u a l T u n i n g.
OK
Select D T V.
3
4
Select the desired channel number.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
40
MANUAL PROGRAMME TUNING (IN ANALOGUE MODE)
Manual Tuning lets you manually tune and arrange the stations in whatever order you desire.
SETUP
Move
OK
SETUP
Auto Tuning
Auto Tuning
Manual Tuning
Manual Tuning
Programme Edit
Programme Edit
Move
OK
TV
F
: On
Booster
: OnBand
Software Update
: On
Software Update
: OnChannel
Diagnostics
3
V/UHF
0
Fine
F G
Search
F G
Name
C 02
Store
Close
1 MENU
Select S E T U P.
5
Select V / U H F or C a b l e.
6
2
OK
or
Select M a n u a l T u n i n g.
1
2
3
4
5
6
7
8
9
Select the desired
channel number.
0
7
3
OK
WATCHING TV / PROGRAMME CONTROL
Booster
Diagnostics
G
Storage
Commence searching.
Select T V.
8
4
or
1
2
3
4
5
6
7
8
9
Select the desired programme number on.
OK
Select S t o r e.
0
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
O n’.
• Use NUMBER buttons to input a 4-digit password in L o c k S y s t e m ‘O
• To store another channel, repeat steps 4 to 9.
41
WATCHING TV / PROGRAMME CONTROL
SETUP
Move
SETUP
OK
Move
F
OK
TV
G
Auto Tuning
Auto Tuning
Storage
Manual
Manual Tuning
Tuning
Manual
Manual Tuning
Tuning
Band
V/UHF
Channel
: On
Fine
: On
Search
F G
Name
C 02
Programme Edit
Programme Edit
Booster
: On
Booster
Software Update
: On
Software Update
Diagnostics
Diagnostics
3
0
F G
Store
Close
WATCHING TV / PROGRAMME CONTROL
A
Assigning a station name
You can assign a station name with five characters to each programme number.
1 MENU
5
Select S E T U P.
2
OK
Select M a n u a l T u n i n g.
OK
6
3
OK
Select C l o s e
Select T V.
OK
7
OK
4
OK
A
Select the position and make
your choice of the second character, and so on.
You can use an the alphabet A
to Z , the number 0 to 9 , +/ -,
and blank.
Select S t o r e
Select N a m e.
Fine Tuning
Normally fine tuning is only necessary if reception is poor.
1 MENU
Select S E T U P.
4
OK
Select M a n u a l T u n i n g.
5
OK
Select T V.
6
2
3
Select F i n e.
Fine tune for the best picture and
sound.
OK
Select S t o r e
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
42
PROGRAMME EDIT
When a programme number is skipped, it means that you will be unable to select it using P
viewing.
button during TV
If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or
select it in the Programme edit menu.
This function enables you to skip the stored programmes.
Move
TEN Digital
TV
DTV
1 TEN Digital
OK
7 7 Digital
Auto Tuning
Manual Tuning
Programme Edit
Booster
: On
Software Update
: On
Favourite List
Diagnostics
Radio
2 ABC TV Sydney
9 Nine Digital
10 TEN Digital
11 TEN Guide
12 TEN HD
20 ABC HDTV
21 ABC2
22 ABC TV
70 7 HD Digital
71 7 Digital 1
72 7 Digital 2
73 7 Digital 3
77 7 Guide
90 Nine Digital HD
E
FAV Favourite
Pr. Change
Navigation
P
Page Change
RETURN Previous
Skip
1 MENU
Select S E T U P.
• Use NUMBER buttons to input a 4-digit
WATCHING TV / PROGRAMME CONTROL
1
SETUP
O n’.
password in L o c k S y s t e m ‘O
2
OK
Select P r o g r a m m e E d i t.
3
OK
4
Enter the P r o g r a m m e E d i t.
Select a programme to be
stored or skipped.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
43
WATCHING TV / PROGRAMME CONTROL
(IN DTV/RADIO MODE)
A
Skipping a programme number
Select a programme number to be skipped.
2
BLUE
Turn the skipped programme number to blue.
3
BLUE
WATCHING TV / PROGRAMME CONTROL
44
Release the skipped programme.
• When programmes are to be skipped, skipped
programme shows in blue and these programmes will not be selected by the P
buttons during TV viewing.
• If you wish to select a skipped programme, directly
enter the programme number with the NUMBER buttons or select it in the programme edit or EPG.
1
A
Selecting favourite programme
1
MARK
FAV
Select your favourite programme number.
• This will automatically include the selected pro-
gramme into your favourite programme list.
(IN TV MODE)
This function enables you to delete or skip the stored programmes.
You can also move some channels and use other programme numbers.
A
Deleting a programme
1
Select a programme number to be deleted.
• The selected programme is deleted, all the fol-
lowing programmes are shifted up one
2
RED
Turn the deleted programme number to red.
RED
A
Release the deleted programme.
Moving a programme
1
Select a programme number to be moved.
2
Turn the moved programme number to YELLOW.
YELLOW
3
YELLOW
A
Release the moved programme.
Skipping a programme number
1
Select a programme number to be skipped.
2
BLUE
Turn the skipped programme number to blue.
3
BLUE
A
WATCHING TV / PROGRAMME CONTROL
3
• When a programme number is skipped it means
that you will be unable to select it using the P
button during normal TV viewing.
• If you wish to select a skipped programme, directly
enter the programme number with the NUMBER buttons or select it in the programme edit or EPG.
Release the skipped programme.
Selecting a Favourite Programme
1
MARK
FAV
Select your favourite programme number.
• The selected programme will be added to the
favourite programme list.
45
WATCHING TV / PROGRAMME CONTROL
BOOSTER (IN DIGITAL MODE)
If reception is poor select Booster to On.
When the signal is strong, select "Off".
SETUP
Move
OK
SETUP
WATCHING TV / PROGRAMME CONTROL
Auto Tuning
Auto Tuning
Manual Tuning
Manual Tuning
Programme Edit
OK
Programme Edit
Booster
:: On
On
Booster
Software Update
: On
Software Update
Diagnostics
1 MENU
Move
Off
:: On
On
On
On
: On
Diagnostics
Select S E T U P.
2
Select B o o s t e r.
OK
3
Select O n or O f f.
OK
4
OK
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
46
SOFTWARE UPDATE
Software Update means software can be downloaded through the digital terrestrial broadcasting system.
SETUP
Move
SETUP
OK
Auto Tuning
Manual Tuning
Manual Tuning
Programme Edit
: On
Booster
Software Update
On
:: On
Software Update
OK
Diagnostics
Select O n or O f f.
• If you select O n, a user confirm message box will be displayed to notify that new software is found.
3
Select S E T U P.
OK
Select S o f t w a r e U p d a t e.
4
OK
: On
Off
On
:: On
On
On
Save.
* When setting “Software Update”
Occasionally, a transmission of
updated digital software information will result in the following
menu on the TV screen.
When the Software Update
O f f”, the message to
menu is “O
O n” appears.
change it to “O
Select the Y E S using the
button and you will see the following picture.
After the Software Update is
complete, the System restarts.
WATCHING TV / PROGRAMME CONTROL
2
OK
Programme Edit
Booster
Diagnostics
1 MENU
Move
Auto Tuning
When the power is turned off,
downloading starts.
When the power is turned on while
updating, the progress status is displayed.
- During Progress of a Software Update, please note the following:
• Power to the TV must not be interrupted.
• The TV must not be switched off.
• The antenna must not be disconnected.
• After Software Update, you can confirm the updated software version in Diagnostics menu.
47
WATCHING TV / PROGRAMME CONTROL
DIAGNOSTICS
This function enables you to view information on the Manufacturer, Model/Type and Software Version.
This displays the information and signal strength of the tuned MUX.
This displays the signal information and service name of the selected MUX.
Engineering Diagnostics
SETUP
Move
Manufacturer : LG Electronics Inc.
Model/Type : 42LG60FD
Software Version : V2.00.0
OK
Auto Tuning
WATCHING TV / PROGRAMME CONTROL
Manual Tuning
D
Booster
: On
CH 30
CH 34
Software Update
: On
CH 36
Programme Edit
Diagnostics
CH 38
CH 54
CH 60
E
RETURN
1 MENU
MENU
Exit
Select D i a g n o s t i c s.
OK
OK
Popup
Select S E T U P.
2
3
Prev.
Display Manufacturer, Model/Type and Software Version.
4
OK
Display the information of Channel.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
48
SELECTING THE PROGRAMME TABLE
You can check which programmes are stored in the memory by displaying the programme table
Mini Glossary
Programme List
Displayed when the
Locked Programme.
1 TEN Digital
9 Nine Digtal
72 7 Digital 2
A
Exit
Displaying programme LIST
1
Display the PROGRAMME LIST.
LIST
A
2
Select a programme.
OK
TV/RAD
From the programme you are currently watching, the mode will change
from TV to DTV to Radio.
Switch to the chosen programme number.
Paging through a programme list
1
P
A
have been set up to be skipped by auto programming or in the programme edit mode.
• Some programmes with the channel number
shown in the programme LIST indicate there is
no station name assigned.
Selecting a programme in the programme list
1
A
• You may find some blue programmes. These
WATCHING TV / PROGRAMME CONTROL
RETURN
P
A
G
E
Turn the pages.
2
LIST
Return to normal TV viewing.
Displaying the favourite programme table
1 MARK
Display the Favourite Programme table.
FAV
49
WATCHING TV / PROGRAMME CONTROL
INPUT LIST
HDMI and AV can be recognized by a detect pin and thus enabled only when an external device approves voltage.
By using T V / R A D button, you can move from External Input to RF Input and to the last watched programme in DTV/RADIO/TV
mode.
1
Select the input source.
OK
INPUT
Only 32/42/47/52LG6***
WATCHING TV / PROGRAMME CONTROL
AV
Component1
Component2
RGB
HDMI4
HDMI3
HDMI2
HDMI1
Antenna
Only 26/32/37/42LG3***, 32/42/47LG5***, 42/47/52LG7***
AV1
AV2
Component1
Component2
HDMI3
HDMI2
HDMI1
RGB
Antenna
• You can also adjust INPUT menu.
Only 42/47/52LG7***
Only 32/42/47/52LG6***
INPUT
Move
INPUT
Antenna
Antenna
AV
AV1
Component1
AV2
Component2
Component1
RGB
Component2
HDMI1
RGB
HDMI2
HDMI1
HDMI3
Move
HDMI2
E
50
OK
E
OK
• A n t e n n a : Select it when watching the DTV/TV.
• A V : Select it when watching the VCR or external
equipment.
• C o m p o n e n t : Select it when using the DVD or
the Digital set-top box depends on connector.
• R G B :Select it when using PC depends on connector.
• H D M I : Select it when using DVD, PC or Digital
set-top box depend on connector.
This function operates only with devices with the SIMPLINK logo.
Please check the SIMPLINK logo.
The product might not function properly when using it with other products with HDMI-CEC function.
This allows you to control and play other AV devices connected to the display through HDMI cable without
additional cables and settings.
O f f”.
If you do not want SIMPLINK menu, select “O
OPTION
Subtitle
Move
OK
: Off
Input Label
OPTION
Move
Subtitle
: Off
Input Label
On
:: On
SIMPLINK
SIMPLINK
Key Lock
: Off
Key Lock
Off
On
:: On
On
On
: Off
Set ID
:1
Set ID
:1
SIMPLINK
SIMPLINK
Power Indicator
Power Indicator
Factory Reset
Factory Reset
OK
1 MENU
Select O P T I O N.
2
OK
Select S I M P L I N K.
WATCHING TV / PROGRAMME CONTROL
SIMPLINK function is not supported by HDMI IN 3(only 26/32/37/42LG3***, 32/42/47LG5***,
42/47/52LG7***) and HDMI IN 4(only 32/42/47/52LG6***) input.
3
OK
Select O n or O f f.
4
• Press the M E N U button to return to normal TV viewing.
OK
Save.
• Press the R E T U R N button to move to the previous menu screen.
! NOTE
Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the SIMPLINK device
with the HDMI cable.
G After connecting the HDMI terminal for the home theatre with the SIMPLINK function using the above method, connect
the DIGITAL AUDIO OUT terminal on the back of the TV to the DIGITAL AUDIO IN terminal on the back of the SIMPLINK device with the OPTICAL cable.
G When operating an external device with SIMPLINK, press the TV button from the MODE buttons on the remote control.
G When you switch the Input source using the INPUT button on the remote control, you can stop the operation of a device
controlled by SIMPLINK
G When you select or operate a media device with home theatre function, the speaker automatically switches to home theatre speaker (HT speaker).
G
51
WATCHING TV / PROGRAMME CONTROL
SIMPLINK Functions
Disc playback
Control connected AV devices by pressing the
(The Ô button does not provide such functions.)
, OK, G, A, l l, FF and GG buttons.
Direct Play
After connecting AV devices to the TV, you can directly control the devices and play media without additional settings.
Select AV device
Enables you to select one of the AV devices connected to the TV and operate it.
Power off all devices
When you switch off the TV, all connected devices are turned off.
WATCHING TV / PROGRAMME CONTROL
Switch audio-out
Offers an easy way to switch audio-out.
Sync Power on
When you play the connected AV device, TV will automatically turn on.
* A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not provide this function.
SIMPLINK Menu
Press the
button and then OK button to select the desired SIMPLINK source.
1
T V v i e w i n g : Switch to the previous TV programme
regardless of the current mode.
2
D I S C p l a y b a c k : Select and play connected discs.
When multiple discs are available, the titles of discs are
conveniently displayed at the bottom of the screen.
3
V C R p l a y b a c k : Play and control the connected
VCR.
4
H D D R e c o r d i n g s p l a y b a c k : Play and control
recordings stored in HDD.
5
Audio Out to Home theatre/Audio Out to TV:
Select Home theatre or TV speaker for Audio Out.
1
2
Selected Device
3
When device is not connected
(displayed in gray)
4
When a device is connected
(displayed in bright colour)
5
F G
• H o m e t h e a t r e: Only one supported at a time
• D V D , R e c o r d e r: Up to three supported at a time
• V C R: Only one supported at a time
52
Change Device
OK
INPUT LABEL
Selects a label for each input source.
OPTION
Move
Subtitle
OK
: Off
Input Label
OPTION
Subtitle
Move
: Off
Input Label
SIMPLINK
: On
SIMPLINK
Key Lock
: Off
Key Lock
: Off
Set ID
:1
Set ID
:1
Power Indicator
Power Indicator
Factory Reset
Factory Reset
: On
F
G
OK
F
Component2
Component1
RGB
Component2
HDMI1
RGB
HDMI2
HDMI1
HDMI3
HDMI2
HDMI4
HDMI3
Only 32/42/47/52LG6***
G
OK
AV2
Close
1 MENU
AV1
Component1
Close
Only 26/32/37/42LG3***,
32/42/47LG5***,
42/47/52LG7***
Select OPTION.
WATCHING TV / PROGRAMME CONTROL
AV
2
OK
Select Input Label.
3
OK
Select the source.
4
Select the label.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
53
WATCHING TV / PROGRAMME CONTROL
AV MODE
You can select the optimal images and sounds quickly.
WATCHING TV / PROGRAMME CONTROL
1AV MODE
Off
Cinema
Game
Sport
Press the AV MODE button repeatedly to select the desired source.
2
OK
• If you select C i n e m a M o d e in A V m o d e, C i n e m a mode will be
selected both for P i c t u r e M o d e and S o u n d M o d e in P I C T U R E
menu and A U D I O menu respectively.
O f f” in A V m o d e, the picture and image which you ini• If you select “O
tially set will be selected.
54
TO USE THE USB DEVICE
This function is not available for all models.
When connecting the USB device
When you connect a USB device, this screen is displayed, automatically.
In USB device, you can not add a new folder or delete the existing folder.
1 Connect the USB device to the U S B
IN
jacks on the side of TV.
• It doesn’t support USB HDD
• This TV Supports on JPEG and MP3.
When removing the USB device
USB memory stick
Select the USB Eject menu before removing the
USB device.
Select P H O T O L I S T or M U S I C L I S T
Select USB Eject.
2
OK
PHOTO LIST
MUSIC LIST
3
OK
TO USE THE USB DEVICE
1Q. MENU
2
Precautions when using the USB device
Only a USB memory stick is recognizable.
G It does not support Card Reader device.
G If the USB storage device is connected through a USB hub, the device is not recognizable.
G A USB storage device using an automatic recognition programme may not be recognized.
G A USB storage device which uses its own driver may not be recognized.
G If an unsupported USB device is connected, the device may cause the product to malfunction or down.
G The recognition speed of a USB storage device may depend on each device.
G Please do not turn off the TV or unplug the USB device when the connected USB storage device is working.
When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged.
G Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may
cause the product to malfunction or fail to be played. Never forget to use only a USB storage device which has
normal music files or image files.
G Please use only a USB storage device which was formatted as a FAT32 file system provided with the Windows
operating system. In case of a storage device formatted as a different utility programme which is not supported
by Windows, it may not be recognized.
G Please connect power to a USB storage device which requires an external power supply. If not, the device may
not be recognized.
G Please connect a USB storage device with cable is offered by USB maker. If connected with cable is not offered
by USB maker or an excessively long cable, the device may not be recognized.
G Some USB storage devices may not be supported or operated smoothly.
G File alignment method of USB storage device is similar to Window XP and filename can recognize up to 100
English characters.
G Please back up the important file because a data of USB device may be damaged. Data management is consumer's responsibility and in consequence the manufactures does not cover the product bearing data damage.
G
55
TO USE THE USB DEVICE
PHOTO LIST
The On Screen Display may be different from your TV. Images are an example to assist with the TV operation.
PHOTO(*.JPEG) supporting file
Baseline: 7680 x 4320
• You can play JPEG files only.
• Only baseline scan is supported among JPEG (SOF0, SOF1 only).
Screen Components
TO USE THE USB DEVICE
2
1 MENU
OK
Select U S B.
Select Photo List.
OK
2
1
Moves to upper level folder
2
Current page/Total pages
3
4
Usable USB memory
5
Corresponding buttons on the
remote control
Page 2/3
Drive1
JMJ001
1366x768, 125KB
1
Up Folder
Navigation
4
USB Device
PHOTO LIST
Total number of marked photos
3
Option
No Marked
Free Space 150MB
Up Folder
KY103
KY101
KY104
KY102
KY105
JMJ001
JMJ005
JMJ002
JMJ006
JMJ003
JMJ007
JMJ004
JMJ008
Page Change
MARK
Mark
RETURN
Exit
5
• Non-supported files are displayed in the
form of bitmap.
PHOTO LIST
USB Device
Page 2/3
Drive1
JMJ001
0 x 0, 0KB
Up Folder
Navigation
56
Option
No Marked
Free Space 150MB
Up Folder
KR103
KR101
KR104
KR102
• Some files may be displayed the preview
image by icon only.
PHOTO LIST
USB Device
Page 2/3
Drive1
JMJ001
No Marked
Free Space 150MB
Up Folder
KR103
KR101
KR104
KR105
KR102
KR105
JMJ001
JMJ005
JMJ001
JMJ005
JMJ002
JMJ006
JMJ002
JMJ006
JMJ003
JMJ007
JMJ003
JMJ007
JMJ004
JMJ008
Page Change
MARK
Mark
1366x768, 125KB
Up Folder
RETURN
Exit
Navigation
Option
JMJ004
Page Change
JMJ008
MARK
Mark
RETURN
Exit
Photo Selection and PopUp Menu
PHOTO LIST
USB Device
Page 2/3
Drive1
JMJ001
1366x768, 125KB
Up Folder
KR103
KR101
KR104
KR102
KR105
JMJ001
JMJ005
JMJ002
JMJ006
JMJ003
JMJ007
MARK
No Marked
Exit
RETURN
Free Space 150MB
Up Folder
KR103
KR101
KR102
JMJ001
JMJ002
1366x768, 125KB
Up Folder
Navigation
Mark
USB Device
Page 2/3
Drive1
JMJ001
1
JMJ008
Page Change
Option
JMJ003
KR104
G
1366x768, 125KB
KR105
View
JMJ005
Mark All
JMJ007
Close
JMJ004
Page Change
JMJ008
MARK
Mark
Mark All : Mark all photos on the screen.
G Unmark All : Deselect all marked photos.
G D e l e t e : Delete the selected photo item.
G C l o s e : Close the pop-up menu.
G
JMJ006
Delete
View : Display the selected item.
RETURN
Exit
TO USE THE USB DEVICE
Option
PHOTO LIST
Free Space 150MB
JMJ004
Up Folder
Navigation
No Marked
Select the target folder.
• Use the P
2
3
4
Select the desired photos.
OK
OK
Show the PopUp menu.
OK
button to navigation in the
photo page.
• Use the M A R K button to mark or unmark a
photo. When one or more photos are marked,
you can view individual photos or a slide show
of the marked photos. If no photos are marked,
you can view all photos individually or all photos in the folder in a slide show.
Select the desired PopUp menu.
• Press the R E T U R N button to return to normal TV viewing.
57
TO USE THE USB DEVICE
Set up the menu in Full-Sized Screen
You can change the settings to display photos stored on a USB device, on a full-sized screen.
Detailed operations are available on full-sized photo view screen.
PHOTO LIST
USB Device
Page 2/3
Drive1
JMJ001
1366x768, 125KB
TO USE THE USB DEVICE
Option
PHOTO LIST
Up Folder
KR103
KR101
KR104
KR102
KR105
JMJ001
JMJ005
JMJ002
JMJ006
JMJ003
JMJ007
JMJ008
Page Change
MARK
Mark
RETURN
Exit
USB Device
Page 2/3
Drive1
JMJ001
No Marked
Free Space 150MB
Up Folder
KR103
KR101
KR102
JMJ001
JMJ002
1366x768, 125KB
JMJ003
KR104
1366x768, 125KB
KR105
View
JMJ005
Mark All
JMJ006
Delete
JMJ007
Close
JMJ004
Up Folder
Navigation
Free Space 150MB
JMJ004
Up Folder
Navigation
No Marked
Option
Page Change
JMJ008
MARK
Mark
Loading
RETURN
Exit
Slideshow
1/17
Delete
Option
Close
The aspect ratio of a photo may change the size of the photo displayed on the screen in full size.
Press the R E T U R N button to move to the previous menu screen.
1
Select the target folder.
• Use the P
photo page.
2
3
OK
OK
4
5
58
Select the desired photos.
Show the PopUp menu.
Select V i e w
OK
The selected photo is displayed in
full size.
button to navigation in the
6
Select the Slideshow ,
(Rotate),
OK
D e l e t e, Option or Close
• Use
Loading
Slideshow
G
1/17
Delete
Option
Close
button to select the previous
or next photo.
• Use
button to select and control
the menu on the full-sized screen.
G
■
( R o t a t e ) : Rotate photos.
Rotates the photo 90° clockwise.
G
D e l e t e : Delete photos.
G
O p t i o n : Set values for S l i d e S p e e d.
■ Use
button and O K button to set values. Then go to
OK
and press O K to save the settings.
G
TO USE THE USB DEVICE
S l i d e s h o w : When no picture is selected, all photos in the current
folder are displayed during slide show. When selected, the selected
photos are displayed during slide show.
■ Set the time interval of the slide show in O p t i o n.
C l o s e : Hide the menu on the full-sized screen.
■ To see the menu again on the full-sized screen, press O K button
to display.
Press F G to set the time interval between
slides.
Slide Speed
OK
Fast
Close
5
59
TO USE THE USB DEVICE
MUSIC LIST
Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be
supported by this model.
Music file on your USB device can be played by this unit.
The On Screen Display may be different from your TV. Images are an example to assist with the TV
operation.
MUSIC (*.MP3) supporting file
Bit rate 32 ~ 320
• Sampling rate MPEG1 layer 3: 32 kHz, 44.1 kHz, 48 kHz.
• It plays under 100Mb.
TO USE THE USB DEVICE
Screen Components
1 MENU
2
Select U S B.
OK
OK
2
1
Moves to upper level folder
2
Current page/Total pages
3
Total number of marked music
titles
4
Usable USB memory
5
Corresponding buttons on
the remote control
3
4
USB Device
MUSIC LIST
Page 2/3
No Marked
Music
Free Space 150MB
Title
Duration
Up Folder
00:00 / 03:47
1
Up Folder
Navigation
Option
5
60
Select Music List.
Page Change
MARK
Mark
RETURN
Exit
Music Selection and PopUp Menu
As shown , up to 6 music titles are listed per page.
MUSIC LIST
USB Device
Page 2/3
No Marked
Music
Free Space 150MB
Duration
Title
Up Folder
00:00 / 03:47
Up Folder
Navigation
Option
MARK
Mark
Exit
RETURN
USB Device
Page 2/3
No Marked
Free Space 150MB
Duration
Title
Music
Up Folder
4395KB
1Kbps
Play
Mark All
Delete
00:00 / 03:47
Close
Up Folder
Navigation
1
2
3
4
Option
Page Change
MARK
Mark
RETURN
Exit
Select the target folder.
Select the desired music title.
OK
OK
Show the PopUp menu.
OK
TO USE THE USB DEVICE
MUSIC LIST
Page Change
P l a y (During stop) : Play the selected music
titles.
Once a music finishes playing, the next selected one will be played. When there are no
selected music titles to play, the next one in
the current folder will be played. If you go to a
different folder and press the O K button, the
current music in playback will stop.
G P l a y M a r k e d : Play the selected music titles.
Once a music finishes playing, the next selected one will be played automatically.
G S t o p P l a y (During playback) : Stop the playing music titles.
G M a r k A l l : Mark all music titles in the folder.
G U n m a r k A l l : Deselect all marked music titles.
G D e l e t e : Delete the selected music titles.
G C l o s e : Close the pop-up menu.
G
• Use the P
button to navigation in the
music page.
• Use M A R K button to mark or unmark a music.
When one or more music files are marked, the
marked music title will be played in sequence.
For example, if you want to listen to only one
music repeatedly, just mark the music only and
play it. If no music is marked, all the music in
the folder will be played in sequence.
Select the desired PopUp menu.
• Press the R E T U R N button to return to normal TV viewing.
61
TO USE THE USB DEVICE
TO USE THE USB DEVICE
62
■
If you don't press any button for a while during the playing, the play information box (as shown in the below) will
float as a screen saver.
■
The ‘Screen Saver’?
Screen saver is to prevent screen pixel damage due to an
fixed image remaining on the screen for a extended period
of time.
! NOTE
When music is playing,
is displayed in back of the music title.
G A damaged or corrupted music does not play but displays 00:00 in playtime.
G A music downloaded from a paid service with copyright protection does not start but displays inappropriate information in playtime.
G If you press O K, A buttons, screen saver is stopped.
G The P L A Y ( G) , P a u s e ( I I ) , A, GG, FF buttons on the remote control are also available in this mode.
G You can use the GG button to select the next music and the FF button to select the previous music.
G
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing
options.
The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of
these programme details will vary, depending on the particular broadcaster).
This function can be used only when the EPG information is broadcast by broadcasting companies
The EPG displays the programme details for next 7 days.
Programme Guide
E
Switch on/off EPG
1/ Mar. 2006 15:09
1 TEN Digital
1GUIDE
ALL
Switch on or off EPG.
1 TEN Digital
1/Mar.
14:00
The Oprah W...
7 7 Digital
12 TEN HD
No Informa...
The Oprah W...
The Oprah W...
The Oprah W...
Ready Steady Cook
Ready Steady Cook
Ready Steady Cook
G
G
G
No Informa...
No Informa...
No Informa...
G
G
G
E
TV/RAD Radio
Mode
Select a programme
1
or
2
OK
P
Select desired programme.
Display the selected programme.
FAV Favourite
Date
INFO
Information
Remind Programme
Pr. Change
Remind List
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
11 TEN Guide
Ready Steady Cook
No Information
No Information
9 Nine Digital
10 TEN Digital
15:00
E
63
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
Button Function in NOW/NEXT Guide Mode
RED
Change EPG mode.
YELLO
YELLOW
Enter Timer Remind setting mode.
BLUE
Enter Timer Remind list mode.
Select the Broadcast Programme.
GUIDE
OK
Change to the selected programme.
Page Up/Down.
P
or
Select TV or RADIO Programme.
TV/RAD
Detail information on or off
Select NOW or NEXT Programme.
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
Button Function in 7 Day Guide Mode
RED
GREEN
Change EPG mode.
YELLO
YELLOW
Enter Timer Remind setting mode.
BLUE
Enter Timer Remind list mode.
OK
Select the Broadcast Programme.
Enter Date setting mode.
Page Up/Down.
P
GUIDE
or
Switch off EPG.
Select TV or RADIO Programme.
TV/RAD
Change to the selected programme.
Detail information on or off
Select NOW or NEXT Programme.
Button Function in Date Change Mode
GREEN
Switch off Date setting mode.
OK
Change to the selected date.
Select a date.
64
Switch off EPG.
Switch off Date setting mode.
GUIDE
or
Switch off EPG.
Button Function in Extended Description Box
The detail information on or off.
Text Up/Down.
Enter Timer Remind setting mode.
YELLO
YELLOW
GUIDE
or
Switch off EPG.
Button Function in Remind Setting Mode
OK
Select Service, Date or Start time.
Change to Guide or Timer list mode.
Function setting.
Save Timer Remind.
Button Function in Remind List Mode
YELLO
YELLOW
GREEN
RED
Add new Manual Timer setting mode.
Enter R e m i n d L i s t editing mode.
Delete the selected item.
BLUE
Change to Guide mode.
Select R e m i n d L i s t.
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
YELLO
YELLOW
65
PICTURE CONTROL
PICTURE SIZE (ASPECT RATIO) CONTROL
You can watch the screen in various picture formats; 16:9, Just Scan,
Original, 4:3, 14:9 and Zoom1/2.
If a fixed image is displayed on the screen for a long time, that fixed image
may become imprinted on the screen and remain visible.
You can adjust the enlarge proportion using
button.
This function works in the following signal.
1Q. MENU
Select A s p e c t R a t i o.
• You can also adjust Aspect Ratio in the P I C-
T U R E menu.
• For Zoom Setting, select 1 4 : 9, Z o o m 1 and
2
OK
Select the desired picture format.
PICTURE CONTROL
• 16:9
The following selection will allow you to adjust the picture horizontally, in linear proportion, to fill the entire
screen(useful for viewing 4:3 formatted DVDs)
Z o o m 2 in Ratio Menu. After completing Zoom
Setting, the display goes back to Q.Menu.
• Original
When your TV receives a wide screen signal it will automatically change to the picture format broadcast.
Original
• Just Scan
Following Selection will lead to you view the
picture of best quality without loss of original
picture in high resolution image.
Note : If there is noise in original Picture,
You can see the noise at the edge.
Just Scan
66
• 4:3
The following selection will allow you to view a picture
with an original 4:3 aspect ration, gray bars will appear
on both the left and right of the screen.
• 14:9
You can view a picture format of 14:9 or a general TV
programme in the 14:9 mode. The 14:9 screen is
viewed in the same way as in 4:3, but is magnified to
the left and right.
• Zoom2
Choose Zoom 2 when you wish the picture to
be altered, both horizontally extended and
vertically cropped. The picture adopting a
compromise between alteration and screen
coverage.
• Zoom1
The following selection will allow you to view
the picture without any alteration, while filling
the entire screen. However, the top and bottom of the picture will be cropped.
PICTURE CONTROL
! NOTE
G
G
G
G
You can only select 4 : 3, 1 6 : 9 (Wide), 1 4 : 9, Z o o m 1 / 2 in Component, HDMI mode.
You can only select 4 : 3, 1 6 : 9 (Wide) in RGB mode only.
In HDMI/Component (over 720p) mode, J u s t S c a n is available.
J u s t S c a n function only operates in DTV HD level(576p or above).
67
PICTURE CONTROL
PRESET PICTURE SETTINGS
Picture Mode-Preset
PICTURE
Move
PICTURE
OK
Aspect Ratio : 16:9
Move
OK
Aspect Ratio : 16:9
Picture
Picture Mode
Mode :: Standard
Standard
Picture
Picture Mode
Mode :: Standard
Standard
• Backlight
80
• Backlight
80
• Contrast
90
• Contrast
90
• Brightness
50
• Brightness
50
• Sharpness
60
• Sharpness
60
• Colour
60
• Colour
60
• Tint
0
R
• Tint
G
E
0
E
Intelligent Sensor
Vivid
Standard
Standard
Cinema
R
Sport G
Game
Expert1
Expert2
PICTURE CONTROL
1 MENU
Select P I C T U R E.
• P i c t u r e M o d e adjusts the TV for the best picture
2
OK
3
OK
Select P i c t u r e M o d e.
Select I n t e l l i g e n t S e n s o r(except
26/32/37/42LG3***), V i v i d,
S t a n d a r d, C i n e m a, S p o r t or
Game.
appearance. Select the preset value in the P i c t u r e
M o d e menu based on the programme category.
• When the Intelligent sensor function is on, the most
suitable picture is automatically adjusted according
to the surrounding conditions.
• You can also adjust P i c t u r e M o d e in the Q. Menu.
• I n t e l l i g e n t S e n s o r (except 26/32/37/42LG3***)
: Adjusts picture according to the surrounding conditions.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
68
Auto Colour Tone Control (Cool/Medium/Warm)
Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to
cool to see less intense colours with more blue.
PICTURE
Move
PICTURE
OK
Move
OK
E
E
• Contrast
90
• Contrast
90
Colour Temperature
• Brightness
50
• Brightness
50
Fresh Contrast
• Sharpness
60
• Sharpness
60
Fresh Colour
• Colour
60
• Colour
60
• Tint
0
R
• Tint
G
• Advanced Control
• Picture Reset
Screen
0
• Advanced Control
• Picture Reset
Screen
F
G
High
High
Noise Reduction
R
Medium
Medium
G
Gamma
Medium
Black Level
Auto
Eye Care
Off
Film Mode
Off
Close
PICTURE CONTROL
1 MENU
Select P I C T U R E.
2
OK
Select A d v a n c e d C o n t r o l.
3
OK
4
Select C o l o u r T e m p e r a t u r e.
Select either C o o l, M e d i u m or W a r m.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
69
PICTURE CONTROL
MANUAL PICTURE ADJUSTMENT
Picture Mode-User option
• Backlight
To control the brightness of the screen, adjust the brightness of LCD panel.
• Contrast
Adjusts the difference between light and dark levels in the picture.
• Brightness
Increases or decreases the amount of white in the picture.
• Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
• Colour
Adjusts intensity of all colours.
• Tint
Adjusts the balance between red and green levels.
It is not available to use this function in “II n t e l l i g e n t S e n s o r”.
PICTURE
Move
PICTURE
OK
Aspect Ratio : 16:9
Move
OK
Aspect Ratio : 16:9
PICTURE CONTROL
Picture
Picture Mode
Mode :: Standard
Standard
Intelligent Sensor
Picture
Picture Mode
Mode :: Standard
Standard
• Backlight
80
• Backlight
80
Vivid
• Contrast
90
• Contrast
90
Standard
Standard
• Brightness
50
• Brightness
50
Cinema
• Sharpness
60
• Sharpness
60
Sport
• Colour
60
• Colour
60
• Tint
0
R
G
• Tint
E
0
E
Game
R
Expert1G
Expert2
1 MENU
Select P I C T U R E.
2
Select P i c t u r e M o d e.
OK
3
OK
Select V i v i d, S t a n d a r d, C i n e m a, S p o r t or G a m e.
OK
Select B a c k l i g h t, C o n t r a s t, B r i g h t n e s s, S h a r p n e s s, C o l o u r or T i n t.
OK
Make appropriate adjustments.
4
5
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
! NOTE
G
70
You cannot adjust colour, sharpness and tint in the RGB-PC mode.
Picture Mode-Expert Control
By segmenting categories, E x p e r t 1 and E x p e r t 2 provide more categories which users can set as they see fit,
offering the optimal picture quality for users.
Move
PICTURE
OK
Move
Aspect Ratio : 16:9
Contrast
• Contrast Fresh 50
Picture
Picture Mode
Mode :: Standard
Expert1
• BrightnessNoise50
Reduction
• Backlight
• Contrast
• Brightness
• Sharpness
• Colour
• Tint
E
Vivid
50
Standard
50
Cinema
50
Sport
50
Game
50
Expert1
Expert1
0 R
Expert2
OK
E
PICTURE
F
• SharpnessGamma
50
Screen
G
Low
• Colour
G
Off
Low
50
Black Level
• Tint
0
Film Mode
Advanced
Control
•• Expert
Control
Colour Standard
• Picture Reset
White Balance
Auto
Off
HD
Warm
• Red Contrast
0
E
Close
PICTURE CONTROL
1 MENU
Select P I C T U R E.
2
OK
Select P i c t u r e M o d e.
3
OK
Select E x p e r t 1 or E x p e r t 2.
OK
Select E x p e r t C o n t r o l.
OK
Select your desired Source.
4
5
6
Make appropriate adjustments.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
71
PICTURE CONTROL
PICTURE IMPROVEMENT TECHNOLOGY
Fresh Contrast
Optimizes the contrast automatically according to the brightness of the reflection.
Fresh Colour
Adjusts the colour of the reflection automatically to reproduce as close as possible natural colours.
Noise Reduction
Removes interference up to the point where it does not damage the original picture.
G a m m a.
High gamma values display whitish images and low gamma values display high contrast images.
PICTURE
Move
PICTURE
OK
Move
E
E
• Contrast
90
• Contrast
• Brightness
50
• Brightness
• Sharpness
60
• Sharpness
• Colour
PICTURE CONTROL
• Tint
OK
• Colour
60
0
R
• Tint
G
50
Colour Temperature
50
Fresh Contrast
50
Fresh Colour
50
Noise
0 Reduction
• Advanced Control
Gamma
• Advanced Control
• Picture Reset
• Picture Reset Black Level
Screen
Screen
Medium
F
High
G
High
Medium
Medium
Auto
Eye Care
Off
Film Mode
Off
Close
1 MENU
Select P I C T U R E.
2
OK
Select A d v a n c e d C o n t r o l.
OK
Select F r e s h C o n t r a s t, F r e s h C o l o u r, N o i s e R e d u c t i o n or G a m m a.
3
4
Select your desired Source.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
72
ADVANCED - FILM MODE/REAL CINEMA
To set the TV up for the best picture quality for viewing films.
This feature operates only in TV, AV and Component 480i/576i/1080i mode.(Film Mode only)
PICTURE
Move
PICTURE
OK
Move
OK
E
E
• Contrast
90
• Brightness
50
• Sharpness
60
• Colour
60
• Contrast
50
Colour Temperature
• Brightness
50
Fresh Contrast
• Sharpness
50
Fresh Colour 50
• Colour
Colour Temperature
Medium
High
Fresh Contrast
High
Fresh Colour
Medium
High
High
Noise Reduction 0
• Tint
Medium
Noise Reduction
Medium
• Advanced Control
• Advanced
Gamma Control
Medium
Gamma
Medium
• Picture Reset
• Picture
BlackReset
Level
• Tint
0
R
G
Screen
Screen
Eye Care
Film Mode
Black Level
Auto
F
Close
Off
Auto
Eye Care
Off
G
Real Cinema
Off
F
Off
G
Close
1 MENU
2
OK
3
OK
4
Select P I C T U R E.
PICTURE CONTROL
Only 42/47LG61**,
47/52LG65**,
42/47/52LG7***
Select A d v a n c e d C o n t r o l.
Select F i l m M o d e.(or R e a l C i n e m a(Only 42/47LG61**, 47/52LG65**, 42/47/52LG7***)).
Select O n or O f f.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
73
PICTURE CONTROL
ADVANCED - BLACK(DARKNESS) LEVEL
When you view a film this function adjusts the TV to best picture quality.
This function works in the following mode: AV (NTSC-M), HDMI or Component .
PICTURE
Move
PICTURE
OK
Move
OK
E
E
• Contrast
90
• Contrast
• Brightness
50
• Brightness
• Sharpness
60
• Colour
60
50 Temperature
Colour
• Advanced Control
50
Fresh Contrast
• Sharpness
50
Fresh Colour
• Colour
50
Noise Reduction
• Tint
0
Gamma
• Advanced Control
• Picture Reset
• Picture ResetBlack Level
• Tint
0
R
G
Screen
Screen
Medium
High
High
Medium
Medium
Auto
Eye Care
Off
Film Mode
Off
Close
PICTURE CONTROL
1 MENU
Select P I C T U R E.
• L o w : The reflection of the screen gets darker.
• H i g h : The reflection of the screen gets
brighter.
2
• A u t o : Realizing the black level of the screen
OK
Select A d v a n c e d C o n t r o l.
OK
Select B l a c k L e v e l.
and set it to High or Low automatically.
3
4
Select L o w or H i g h.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
74
ADVANCED - TRUMOTION
(Only 42/47LG61**, 47/52LG65**, 42/47/52LG7***)
It is used for the best picture quality without any motion blur or judder when you enter a quick image or Film
Source.
This feature is disable in RGB-PC,HDMI-PC mode.
PICTURE
Move
PICTURE
OK
Move
E
E
• Contrast
90
• Contrast
• Brightness
50
• Brightness
• Sharpness
60
• Sharpness
• Colour
60
• Tint
0
R
Medium
50 Contrast
Fresh
50 Colour
Fresh
High
High
50
Noise Reduction
• Colour
50
Gamma
• Tint
0
Black Level
• Advanced Control
• Picture Reset Eye Care
G
• Advanced Control
• Picture Reset
Screen
OK
Colour Temperature
Screen
Medium
Medium
Auto
Off
Film Mode
TruMotion
Off
F
High
G
Close
Select P I C T U R E.
• High
Provides smoother picture movement.
• Low
2
OK
3
OK
4
Select A d v a n c e d C o n t r o l.
Select T r u M o t i o n.
Provides smooth picture movement. Use this setting for standard use.
• Off
Use this setting when "High" and "Low" setting
result in noise.
PICTURE CONTROL
1 MENU
Select O f f, L o w or H i g h.
• If you enable "TruMotion", noise may appear on the screen.
• If this occurs, set "TruMotion" to "Off".
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
75
PICTURE CONTROL
TRUMOTION DEMO
(Only 42/47LG61**, 47/52LG65**, 42/47/52LG7***)
Use it to see the difference between TruMotion Demo on and TruMotion Demo off.
It’s not available to use this function in RGB[PC], HDMI[PC] mode.
PICTURE
Move
OK
E
• Brightness
50
• Sharpness
60
• Colour
60
• Tint
0
R
G
• Advanced Control
• Picture Reset
Screen
TruMotion
TruMotion Demo
Demo
PICTURE CONTROL
1 MENU
TruMotion On
TruMotion Off
RETURN
Exit
LG’s Advanced TruMotion 100Hz technology provides ima LG’s Advanced TruMotion 100Hz technology provides im
Select P I C T U R E.
2
OK
Select T r u M o t i o n D e m o .
OK
Display T r u M o t i o n O n or T r u M o t i o n O f f .
3
• To stop T r u M o t i o n D e m o, press the R E T U R N button.
76
EYE CARE
It helps you adjust brightness when the screen is too bright to prevent dazzling.
PICTURE
Move
PICTURE
OK
Move
OK
E
E
• Contrast
90
• Contrast
90 Colour Temperature
• Brightness
50
• Brightness
50
• Sharpness
60
• Sharpness
60
• Colour
60
• Colour
60
• Tint
0
R
G
• Tint
High
Fresh Colour
High
Noise Reduction
Medium
0
• Advanced ControlGamma
Black Level
• Picture Reset
• Advanced Control
• Picture Reset
Screen
Medium
Fresh Contrast
Screen
Eye Care
Medium
Auto
F
Film Mode
Off
G
Off
Close
2
OK
3
OK
4
PICTURE CONTROL
1 MENU
Select P I C T U R E.
Select A d v a n c e d C o n t r o l.
Select E y e C a r e.
Select O n or O f f.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
77
PICTURE CONTROL
PICTURE RESET
Settings of the selected picture modes return to the default factory settings.
PICTURE
Move
PICTURE
OK
OK
E
E
• Contrast
90
• Contrast
90
• Brightness
50
• Brightness
50
• Sharpness
60
• Sharpness
60
• Colour
60
• Tint
0
i
R
G
0
R
G
• Advanced Control
• Picture Reset
Screen
Resetting
video configuration...
• Colour
60
• Tint
• Advanced Control
PICTURE CONTROL
1 MENU
Move
• Picture Reset
Screen
Select P I C T U R E.
2
OK
Select P i c t u r e R e s e t.
3
OK
Initialize the adjusted value.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
78
POWER INDICATOR
It helps you adjust the brightness of moving LED and sound when power is turned on.
OPTION
Subtitle
Move
OK
: Off
OPTION
Subtitle
Move
OK
: Off
Input Label
Input Label
SIMPLINK
: On
SIMPLINK
: On
Key Lock
: Off
Key Lock
Set ID
:1
Set ID
: Off
Sound
:Startup
1
Power
Power Indicator
Indicator
Power
Power Indicator
Indicator
Standby Light
Factory Reset
Factory Reset
Power Light
On
Demo Mode
Off
F
Low
Low
Close
Only 32/42/47/52LG6***
Standby Light
On
F
Power Light
G
Off
Close
Only 26/32/37/42LG3***,
32/42/47LG5***,
42/47/52LG7***
PICTURE CONTROL
1 MENU
G
Select O P T I O N.
2
OK
Select P o w e r I n d i c a t o r.
3
OK
Select S t a r t u p S o u n d, S t a n d b y L i g h t, P o w e r L i g h t or D e m o M o d e.
4
Select your desired Source.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
79
SOUND & LANGUAGE CONTROL
AUTO VOLUME LEVELLER
AVL automatically remains on the same level of volume if you change programmes
AUDIO
AutoVolume
Volume
Auto
Move
Off
:: Off
Balance
AutoVolume
Volume
Auto
0
Sound Mode
L
SOUND & LANGUAGE CONTROL
2
OK
R
: Standard
Move
Off
:: Off
OK
Off
OnL
0 On
Balance
Sound Mode
R
: Standard
• 120Hz
0
-
+
• 120Hz
0
-
+
• 200Hz
0
-
+
• 200Hz
0
-
+
• 500Hz
0
-
+
• 500Hz
0
-
+
• 1.2KHz
0
-
+
• 1.2KHz
0
-
+
• 3KHz
0
-
+
• 3KHz
0
-
+
E
1 MENU
AUDIO
OK
E
Select A U D I O.
Select A u t o V o l u m e.
3
OK
Select O n or O f f.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
80
PRESET SOUND SETTINGS-SOUND MODE
You can select your preferred sound setting; SRS TruSurround XT, Clear Voice, Standard, Music, Cinema, Sport or
Game and you can also adjust the frequency of the equalizer.
Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound
options based on the programme content.
SRS TruSurround XT, Clear Voice, Standard, Music, Cinema, Sport and Game are preset for optimum sound quality at the factory.
AUDIO
Auto Volume
Move
: Off
Balance
Sound Mode
AUDIO
OK
Auto Volume
0
L
R
OK
: Off
Balance
Sound Mode
Standard
: Standard
Move
0
L
R
: Standard
: Standard
• 120Hz
0
-
+
• 120Hz
0
-
+
SRS TruSurround
XT
• 200Hz
0
-
+
• 200Hz
0
-
+
Clear Voice
• 500Hz
0
-
+
• 500Hz
0
-
Standard
Standard+
• 1.2KHz
0
-
+
• 1.2KHz
0
-
Music
+
• 3KHz
0
-
+
• 3KHz
0
-
Cinema
+
E
E
Sport
Game
Select A U D I O.
• You can also adjust S o u n d M o d e in the Q .
M e n u.
2
OK
Select S o u n d M o d e.
3
OK
Select S R S T r u S u r r o u n d X T, C l e a r V o i c e, S t a n d a r d ,
M u s i c , C i n e m a , S p o r t or G a m e.
SOUND & LANGUAGE CONTROL
1 MENU
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
81
SOUND & LANGUAGE CONTROL
SOUND SETTING ADJUSTMENT -USER MODE
Adjusting the audio equalizer.
AUDIO
Auto Volume
Move
Balance
Sound
Sound Mode
Mode
AUDIO
OK
: Off
Auto Volume
0
L
R
Balance
Sound Mode
Mode
Sound
: Standard
Standard (User)
Move
OK
: Off
0
L
R
: Standard (User)
: Standard
• 120Hz
0
-
+
• 120Hz
0
- SRS
• 200Hz
0
-
+
• 200Hz
0
-
+
Clear Voice
• 500Hz
0
-
+
• 500Hz
0
-
Standard
Standard+(User)
• 1.2KHz
0
-
+
• 1.2KHz
0
-
Music
+
• 3KHz
0
-
+
• 3KHz
0
-
Cinema
+
E
E
+
TruSurround
XT
Sport
Game
1 MENU
Select A U D I O.
SOUND & LANGUAGE CONTROL
2
Select S o u n d M o d e.
OK
3
Select S R S T r u S u r r o u n d X T, C l e a r V o i c e, S t a n d a r d , M u s i c ,
C i n e m a , S p o r t or G a m e.
OK
4
5
OK
Select a frequency band.
OK
Set the desired sound level.
R
G
G
82
is a trademark of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs, Inc.
TruSurround XT
BALANCE
You can adjust the sound balance of the speakers to preferred levels.
AUDIO
Move
Auto Volume
Balance
Balance
0
Sound Mode
AUDIO
OK
: Off
Auto Volume
0
L
R
: Standard
Balance
Sound Mode
OK
0
: Standard
0
L
Balance
L
0
R
F
L
R
G
R
• 120Hz
0
-
+
• 120Hz
0
-
• 200Hz
0
-
+
• 200Hz
0
-
+
• 500Hz
0
-
+
• 500Hz
0
-
+
• 1.2KHz
0
-
+
• 1.2KHz
0
-
+
• 3KHz
0
-
+
• 3KHz
0
-
+
E
+
Close
E
SOUND & LANGUAGE CONTROL
1 MENU
Move
: Off
Select A U D I O.
2
OK
Select B a l a n c e.
3
OK
Make desired adjustment.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
83
SOUND & LANGUAGE CONTROL
TV SPEAKERS ON/ OFF SETUP
You can adjust the TV internal speaker status.
In A V, C O M P O N E N T, R G B and H D M I 1 with HDMI to DVI cable, the TV speaker can be operational even
when there is no video signal.
If you wish to use an external Hi-Fi system, turn off the TV internal speakers.
AUDIO
Move
AUDIO
OK
Move
OK
E
E
• 500Hz
0
-
+
• 500Hz
0
-
+
• 1.2KHz
0
-
+
• 1.2KHz
0
-
+
• 3KHz
0
-
+
• 3KHz
0
-
+
• 7.5KHz
0
-
+
• 7.5KHz
0
-
+
• 12KHz
0
-
+
• 12KHz
0
-
+
• Reset
Digital Audio Out
TV Speaker
Speaker
TV
: PCM
: On
Off
• Reset
Digital Audio Out
TV Speaker
Speaker
TV
: PCM
Off
:: On
Off
On
On
SOUND & LANGUAGE CONTROL
1 MENU
2
OK
Select A U D I O.
Select T V S p e a k e r.
3
OK
Select O n or O f f.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
84
SELECTING DIGITAL AUDIO OUT
This function allows you to select your preferred Digital Audio Output.
The TV can only output DOLBY Digital if a channel is broadcast with Dolby Digital audio.
When Dolby digital is available, selecting Dolby Digital in the Digital Audio Out menu will set SPDIF output to
Dolby Digital
If Dolby Digital is selected in the digital audio out menu when dolby digital is not available, SPDIF output will be
PCM.
Even if both Dolby Digital and Audio language have been set in a channel which broadcast Dolby Digital Audio,
only Dolby Digital will be played.
AUDIO
Move
AUDIO
OK
Move
E
OK
E
2
• 500Hz
0
-
+
• 500Hz
0
-
+
• 1.2KHz
0
-
+
• 1.2KHz
0
-
+
• 3KHz
0
-
+
• 3KHz
0
-
+
• 7.5KHz
0
-
+
• 7.5KHz
0
-
+
• 12KHz
0
-
+
• 12KHz
0
-
+
• Reset
Digital Audio
Audio Out
Out
PCM
Digital
:: PCM
Digital
Digital Audio
Audio Out
Out
• Reset
: PCM
TV Speaker
TV Speaker
: On
: On
PCM
Manufactured under license from
Dolby Laboratories. “Dolby “and
the double-D symbol are trademarks of Dolby Laboratories.
Select A U D I O.
• There is a possibility that when HDMI mode,
some DVD players do not make SPDIF sound.
At that time, set the output of the digital audio
of the DVD player to PCM.
Select D i g i t a l A u d i o O u t.
3
OK
Dolby
Dolby Digital
Digital
Select D o l b y D i g i t a l or P C M.
SOUND & LANGUAGE CONTROL
1 MENU
OK
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
85
SOUND & LANGUAGE CONTROL
AUDIO RESET
Settings of the selected Sound Mode return to the default factory settings.
AUDIO
Move
AUDIO
OK
Move
E
E
• 200Hz
0
-
+
• 200Hz
0
-
+
• 500Hz
0
-
+
• 500Hz
0
-
+
• 1.2KHz
0
-
+
• 1.2KHz
0
-
+
• 3KHz
0
-
+
• 7.5KHz
0
-
+
• 7.5KHz
0
-
+
• 12KHz
0
-
+
• 12KHz
0
-
+
•• Reset
Reset
Digital Audio Out
1 MENU
SOUND & LANGUAGE CONTROL
2
OK
OK
: PCM
i
+
Resetting
• 3KHzsound mode
0 - configuration...
••Reset
Reset
Digital Audio Out
: PCM
Select A U D I O.
Select R e s e t.
3
OK
Initialize the adjusted value.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
86
STEREO RECEPTION (IN ANALOGUE MODE ONLY)
When a programme is selected, the sound information for the station appears with the programme number
and station name.
1Q. MENU
Select A u d i o.
2
Select the sound output.
OK
A
Broadcast
On Screen Display
Mono
MONO
Stereo
STEREO
Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of
sound is improved.
In AV, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers.
Select the sound output.
SOUND & LANGUAGE CONTROL
SPEAKER SOUND OUTPUT SELECTION
L + R : Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio
R input is sent to the right loudspeaker.
L + L : Audio signal from audio L input is sent to left and right loudspeakers.
R + R : Audio signal from audio R input is sent to left and right loudspeakers.
87
TIME SETTING
CLOCK SETUP
The clock is set automatically when receiving a digital signal. (You can set the clock manually only if the TV has no
DTV signal.)
You must set the time correctly before using on/off timer function.
TIME
Move
TIME
OK
Move
Clock
Clock
Clock
Clock
Off Time
OK
Date
: Off
Off Time
: Off
On Time
: Off
On Time
: Off
Sleep Timer
: Off
Sleep Timer
: Off
Auto Sleep
: Off
Auto Sleep
: Off
Time Zone
: NSW/ACT
Time Zone
01
Month
Mar.
Year
2008
Hour
16
Minute
: NSW/ACT
09
Close
TIME SETTING
1 MENU
2
OK
3
OK
4
Select T I M E.
Select C l o c k.
Select either the year, date, or time option.
Set the year, date, and time options.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
88
AUTO ON/OFF TIMER SETTING
The Off time function automatically switches the TV to standby at a preset time.
Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode
unless a button has been pressed.
The Off time function overrides the On timer function if both are set to the same time.
The TV must be in standby mode for the On timer to work.
TIME
Move
TIME
OK
Clock
Move
Clock
Off Time
: Off
Off Time
OK
1/Mar. 2007 16:09
:
On Time
: Off
On Time
Off
Sleep Timer
: Off
On Time
Repeat
: Off
: OffHour
Auto Sleep
: Off
Sleep Timer
: OffMinute
00
Time Zone
: NSW/ACT
Auto Sleep
: Off
Mode
: NSW/ACT
Programme
TV
Time Zone
F
Off
G
00
1
Volume
30
Close
1 MENU
Select T I M E.
• To cancel O n / O f f T i m e function, select O f f.
• For On Time function only
OK
OK
2
3
OK
Select R e p e a t.
3
4
Select M o d e.
Select O f f T i m e or O n T i m e.
Select O f f, O n c e, D a i l y, M o n ~ F r i,
M o n ~ S a t, S a t ~ S u n or S u n.
5
4
Select T V, D T V or R a d i o.
TIME SETTING
1
2
Set the programme.
Adjust volume level at
switch-on.
Set the hour.
6
Set the minutes.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
89
TIME SETTING
AUTO SHUT-OFF SETTING
If the TV is switched on and there is no input signal, it will switch off automatically after 10 minutes.
TIME
Move
OK
Clock
1 MENU
2
OK
TIME
Move
OK
Clock
Off Time
: Off
Off Time
: Off
On Time
: Off
On Time
: Off
Sleep Timer
: Off
Sleep Timer
: Off
Auto Sleep
: Off
Auto Sleep
: Off
Time Zone
: NSW/ACT
Time Zone
Off
On
On
: NSW/ACT
Select T I M E.
Select A u t o S l e e p.
TIME SETTING
3
OK
Select O f f or O n.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
90
TIME ZONE SETUP
When you select a Time Zone city, the TV time is set by the time offset information based on Time Zone and
GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a
digital signal.
1 MENU
2
OK
Select T I M E.
Select T i m e Z o n e.
3
OK
4
OK
Select your viewing area time zone.
Confirm it.
You do not have to remember to switch the TV off before you go to sleep.
The sleep timer automatically switches the TV to standby after the preset time has elapsed.
1Q. MENU
2
OK
TIME SETTING
SLEEP TIMER SETTING
Select S l e e p T i m e r.
Select O f f, 1 0, 2 0, 3 0, 6 0, 9 0, 1 2 0, 1 8 0 or 2 4 0 M i n.
• When you switch the TV off, the preset sleep timer is cancelled.
• You can also adjust S l e e p T i m e r in the T I M E menu.
91
PARENTAL CONTROL / RATINGS
SET PASSWORD & LOCK SYSTEM
Enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset.
LOCK
Move
Lock
Lock System
System
LOCK
Move
Lock System
Off
Off: :Off
Set Password
Set Password
On
On
Block Programme
Block Programme
Parental Guidance
1 MENU
OK
: Off
: Off
: Off
Select L O C K.
Parental Guidance
OK
: Off
• If you forget your password, press ‘7’, ‘7’, ‘7’, ‘7’
on the remote control handset.
PARENTAL CONTROL / RATINGS
2
OK
Select L o c k S y s t e m.
OK
Select O n.
3
4
OK
OK
5
1
2
3
4
5
6
7
8
9
0
Set the password.
Input a 4-digit password.
Be sure to remember this number!
Re-enter new password for confirm.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
92
BLOCK PROGRAMME
Blocks any programmes that you do not want to watch or that you do not want your children to watch.
O n”.
It is available to use this function in L o c k S y s t e m ”O
1
TEN Digital
TV
DTV
1 TEN Digital
LOCK
Move
OK
9 Nine Digital
Radio
7 7 Digital
10 TEN Digital
11 TEN Guide
12 TEN HD
Set Password
70 7 HD Digital
71 7 Digital 1
Block
Block Programme
Program
72 7 Digital 2
73 7 Digital 3
Lock System
Parental Guidance
: Off
: Off
Pr. Change
Navigation
P
Page Change
Return Previous
Block/Unblock
1 MENU
Select L O C K.
2
Select B l o c k P r o g r a m m e.
OK
3
OK
4
GREEN
Select a programme to be locked.
PARENTAL CONTROL / RATINGS
Enter the B l o c k P r o g r a m m e.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
93
PARENTAL CONTROL / RATINGS
PARENTAL CONTROL
This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate.
A password is required to gain access to this menu.
This set is programmed to remember which option it was last set to even if you switch the set off.
Prevents children from watching certain adult’s TV programmes, according to the ratings limit set.
LOCK
Lock System
Move
OK
: Off
Set Password
Lock System
Move
OK
: Off
Set Password
Block Programme
Parental Guidance
Guidance
Parental
LOCK
Block Programme
: Off
Parental Guidance
F
R
G
Close
1 MENU
PARENTAL CONTROL / RATINGS
Select L O C K.
2
Select P a r e n t a l G u i d a n c e.
OK
3
OK
Make appropriate adjustments.
4
OK
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
94
KEY LOCK
The TV can be set so that the remote control is required to control it. This feature can be used to prevent unauthorized viewing.
OPTION
Subtitle
Move
OK
: Off
Input Label
1 MENU
: On
: Off
Key
Key Lock
Lock
SIMPLINK
: Off
:Off
Off
Set ID
:1
Set ID
On
:On
1
Power Indicator
Power Indicator
Factory Reset
Factory Reset
: On
Select O P T I O N.
O n’, if the TV is turned off, press the r / I,
• In K e y L o c k ‘O
Select K e y L o c k.
) button on the TV or
INPUT, P D or E(or P
POWER, INPUT, P
or NUMBER buttons on the
remote control then the set will be turned on.
Key Lock
• With the K e y L o c k O n, the display ‘
O n’ appears on the screen if any button on the front
panel is pressed while viewing the TV.
PARENTAL CONTROL / RATINGS
Select O n or O f f.
OK
OK
OK
: Off
SIMPLINK
Key Lock
3
4
Subtitle
Move
Input Label
2
OK
OPTION
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
95
TELETEXT
(IN DIGITAL MODE ONLY)
Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news,
weather, television programmes, share prices and many other topics.
The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information.
SWITCH ON/OFF
Press the T E X T button to switch to teletext. The initial page or last page viewed appears on the screen.
Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number
indicates your selection, while the second shows the current page displayed.
Press the T E X T button to switch off teletext. The previous mode reappears.
SIMPLE TEXT
A
Page selection
1
Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you
press a wrong number, you must complete the three digit number and then re-enter the correct page number.
The P
button can be used to select the preceding or following page.
2
TOP TEXT
TELETEXT
The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field
denotes the next group and the blue field indicates the next block.
A
Block / group / page selection
1
4
With the blue button you can progress from block to block.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
With the green button you can proceed to the next existing page with automatic overflow to the next group.
Alternatively the P button can be used.
The red button returns to the previous selection. Alternatively the P button can be used.
A
Direct page selection
2
3
As with SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER
buttons in TOP mode.
96
FASTEXT
The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button.
A Page selection
1
2
3
4
Press the T . O P T button and then use
button to select i menu. Display the index page.
You can select the pages which are colour coded along the bottom line with corresponding coloured buttons.
AS with SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode.
The P
button can be used to select the preceding or following page.
SPECIAL TELETEXT FUNCTIONS
■
Press the T . O P T button and then use
button to select the Text Option menu.
?
A REVEAL
Select this menu to display concealed information, such as solutions to riddles or puzzles.
A UPDATE
Displays the TV picture on the screen while waiting for a new teletext page. The display will appear at the top left
hand corner of the screen. When the updated page is available then display will change to the page number. Select
this menu again to view the updated teletext page.
A TIME
TELETEXT
When viewing a TV programme, select this menu to display the time at the top right hand corner of the screen.
In the teletext mode, press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the RED/GREEN,
or NUMBER buttons.
A HOLD
Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this menu is
selected the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change
is inactive.
i
A INDEX
Select the each index page.
97
APPENDIX
TROUBLESHOOTING
The TV does not operate properly.
Check to see if there is any object between the TV and the remote control causing
an obstruction. Ensure you are pointing the remote control directly at the TV.
A Ensure that the batteries are installed with correct polarity (+ to +, - to -).
A Ensure that the correct remote operating mode is set : TV, STB etc.
A Install new batteries.
A
The remote control
does not work
Power is suddenly
turned off
Is the sleep timer set?
A Check the power control settings. Has the Power supply been interrupted.
A Is Auto sleep activated on this station?
A
The video function does not work.
Check whether the TV is switched on.
Try another channel. The problem may be with the broadcast.
A Is the power cord inserted correctly into the mains?
A Check your antenna direction and/or location.
A Test the mains outlet by plugging another product into the same outlet.
A
A
No picture &No sound
Picture appears slowly
after switching on
A
This is normal, the image is muted during the TV startup process. Please contact
your service centre, if the picture has not appeared after five minutes.
Adjust Colour in menu option.
Allow a sufficient distance between the product and the VCR.
A Try another channel. The problem may be with the broadcast.
A Are the video cables installed properly?
A Activate any function to restore the brightness of the picture.
A
No or poor colour
or poor picture
Horizontal/vertical bars
or picture shaking
APPENDIX
Poor reception on
some channels
Lines or streaks
in pictures
No picture
when connecting HDMI
98
A
A
Check for local interference such as an electrical appliance or power tool.
Station or cable channel experiencing problems, tune to another station.
A Station signal is weak, reposition the antenna to receive weaker stations.
A Check for sources of possible interference.
A
A
Check antenna (Change the position of the antenna).
A
Check HDMI cable over version 1.3.
If the HDMI cables don’t support HDMI version 1.3, it can cause flickers or no
screen display. In this case use the latest cables that support HDMI version 1.3.
The audio function does not work.
A
Picture OK & No sound
A
A
A
No output from one
of the speakers
+ or - button.
Press the
Sound muted? Press MUTE button.
Try another channel. The problem may be with the broadcast.
Are the audio cables installed properly?
A
Adjust B a l a n c e in menu option.
Unusual sound from
inside
the product
A
A change in ambient humidity or temperature may result in an unusual noise
when the product is switched on or off and does not indicate a fault with the
product.
No sound
when connecting HDMI
or USB
A
Check HDMI cable over version 1.3.
Check USB cable over version 2.0.
A
*This feature is not available for all models.
There is a problem in PC mode. (Only PC mode applied)
The signal is out of range
(Invalid format)
Vertical bar or stripe on
background &
Horizontal Noise &
Incorrect position
Screen colour is unstable
or single colour
A
Adjust resolution, horizontal frequency, or vertical frequency.
A
Check the input source.
A
Use Auto configure or adjust clock, phase, or H/V position. (Option)
A
Check the signal cable.
Reinstall the PC video card.
A
APPENDIX
99
APPENDIX
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV.
Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1
A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water
and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it
to wipe the screen.
2
Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching on.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
A Do not to use a wet cloth.
A
Extended Absence
CAUTION
G
APPENDIX
100
If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power
cord to protect against possible damage from lightning or power surges.
PRODUCT SPECIFICATIONS
MODELS
Dimensions
(Width x Height
x Depth)
with stand
without stand
with stand
Weight
without stand
Power requirement
MODELS
Dimensions
with stand
(Width x Height
x Depth)
without stand
with stand
Weight
without stand
Power requirement
with stand
(Width x Height
x Depth)
without stand
with stand
Weight
without stand
Power requirement
32LG60UD-AA
42LG60FD-AA
805.6 x 626 x 333 mm
31.7 x 24.6 x 13.1 inches
1037.8 x 794.6 x 379.5 mm
40.9x 31.3 x 14.9 inches
1152.8 x 868.6 x 434.5 mm
45.4 x 34.2 x 17.1 inches
1280.1 x 944.7 x 430 mm
50.4 x 37.2x 16.9inches
805.6x 587.4x 96.2mm
31.7 x 23.1 x 3.7 inches
1037.8x 747x 80.8mm
40.9 x 29.4 x 3.2 inches
1152.8 x 820.8 x 79 mm
45.4 x 32.3x 3.1 inches
1280.1 x 896 x 89 mm
50.4x 35.5 x 3.5 inches
14.4 kg / 31.7 lbs
12.2 kg / 26.9 lbs
24.1 kg / 53.1 lbs
20.4 kg / 45 lbs
32.8 kg / 72.3 lbs
27.2 kg / 60 lbs
45 kg / 99.2 lbs
38.1kg / 84lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
52LG65YD-AC
47LG65YD-AC
47LG60FD-AA
42LG61**
47LG61**
42LG61YD-AC
47LG61YD-AC
1037.8 x 798 x 378 mm
40.9x 31.4 x 14.9 inches
1152.8 x 868.6 x 434.5 mm
45.4 x 34.2 x 17.1 inches
1037.8x 746.2x 45mm
40.9 x 29.4 x 1.8 inches
1152.8 x 820.8 x 79 mm
45.4 x 32.3x 3.1 inches
21.3 kg / 47 lbs
18 kg / 39.7 lbs
32.8 kg / 72.3 lbs
27.2 kg / 60 lbs
AC100-240V~ 50/60Hz
42LG7***
47LG7***
52LG7***
42LG70YD-AA
47LG70YD-AA
52LG70YD-AA
1026.2 x 734.0 x 293.4 mm
40.4 x 28.8 x 11.5 inches
1140.4 x 820.1 x 342.9 mm
44.8 x 32.2 x 13.5 inches
1284.4 x 898.6 x 342.9 mm
50.5 x 35.3 x 13.5 inches
1026.2 x 687.9 x 111.8 mm
40.4 x 27.0 x 4.4 inches
1140.4 x 764.8 x 129.0 mm
44.8 x 30.1 x 5.0 inches
1284.4 x 844.6 x 129.5 mm
50.5 x 33.2 x 5.0 inches
21.7 kg / 47.8 lbs
19.1 kg / 42.1 lbs
30.1 kg / 66.3 lbs
25.4 kg / 55.9 lbs
39.9 kg / 87.9 lbs
35.2kg / 77.6lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
PAL B/G, DVB-T
Program Coverage
VHF 0-12, UHF 20-75, CATV 02-44, DTV 06-12, 27-69
Environment
condition
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
75 ohm
APPENDIX
Television System
External Antenna Impedance
■
52LG6***
42LG6***
AC100-240V~ 50/60Hz
MODELS
Dimensions
47LG60**/
47LG65**
32LG6***
32 ~ 104°F (0 ~ 40°C)
Less than 80%
-4 ~ 140°F (-20 ~ 60°C)
Less than 85%
The specifications shown above may be changed without prior notice for quality improvement.
101
APPENDIX
MODELS
Dimensions
(Width x Height x Depth)
32LG3***
37LG3***
42LG3***
26LG30D-AA
32LG30D-AA
37LG30D-AA
42LG30D-AA
with stand
663.3 x 508.2 x 227.3 mm
26.1 x 20.1 x 9.0 inches
801.8 x 604.2 x 227.3 mm
31.5 x 23.7 x 8.9 inches
919.6 x 682.3 x 293.8 mm
36.2 x 26.8 x 11.5 inches
1032.8 x 742.3 x 293.8 mm
40.6 x 29.2 x 11.5 inches
without stand
663.3 x 449.8 x 80.0 mm
26.1 x 17.8 x 3.2 inches
801.8 x 544.1 x 79.0 mm
31.5 x 21.4 x 3.1 inches
919.6 x 610.3 x 89.0 mm
36.2 x 24.0 x 3.5 inches
1032.8 x 670.1 x 92.0 mm
40.6 x 26.3 x 3.6 inches
10.1 kg / 22.3 lbs
8.6 kg / 19.0 lbs
13.4 kg / 29.5 lbs
11.9 kg / 26.2 lbs
18.8 kg / 41.4 lbs
16.2 kg / 35.7 lbs
23.6 kg / 52.0 lbs
21.0 kg / 46.2 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
with stand
Weight
26LG3***
without stand
Power requirement
42LG5***
42LG50FD-AA
42LG50FD-AD
47LG5***
47LG50FD-AA
47LG50FD-AD
813.8 x 598.8 x 231.9 mm
32.1 x 23.6 x 9.2 inches
1034.0 x 735.0 x 294.0 mm
40.7 x 28.9 x 11.5 inches
1156.2 x 813.1 x 342.9 mm
45.5 x 32.0 x 13.5 inches
813.8 x 540.4 x 95.5 mm
32.1 x 21.3 x 3.8 inches
1034.0 x 663.0 x 92.0 mm
40.7 x 26.1 x 3.6 inches
1156.2 x 739.2 x 103.0 mm
45.5 x 29.1 x 4.0 inches
14.1 kg / 31.1 lbs
12.6 kg / 27.8 lbs
21.6 kg / 47.6.0 lbs
19 kg / 41.9 lbs
29.2 kg / 64.3 lbs
24.6 kg / 54.2 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
32LG5***
MODELS
Dimensions
with stand
(Width x Height x Depth)
without stand
Weight
with stand
without stand
Power requirement
Television System
PAL B/G, DVB-T
Program Coverage
VHF 0-12, UHF 20-75, CATV 02-44, DTV 06-12, 27-69
External Antenna Impedance
Operating Temperature
Environment condition Operating Humidity
Storage Temperature
APPENDIX
Storage Humidity
■
102
32LG50FD-AD
75 ohm
32 ~ 104°F (0 ~ 40°C)
Less than 80%
-4 ~ 140°F (-20 ~ 60°C)
Less than 85%
The specifications shown above may be changed without prior notice for quality improvement.
PROGRAMMING THE REMOTE CONTROL
The remote control is a multi brand or universal remote. It can be programmed. to operate most remote
controlled devices from other manufacturers.
Note that the remote control may not control all models from other brands.
Programming a code into a remote mode
1
Testing your remote control.
To find out whether your remote control can operate other components without programming, turn on a
component such as a STB and press the corresponding mode button (such as a S T B) on the remote control, while pointing at the component. Test the POWER and P
buttons to see if the component
responds correctly. If the component does not operate correctly, the remote control requires programming
to operate the device.
2
Switch on the component to be programmed, then press the corresponding mode button (such as S T B)
on the remote control. The remote control button of the desired device is illumintated.
3
Press the M E N U and M U TE buttons simultaneously, the remote control is ready to be programmed with
the code.
4
Enter a code number using the number buttons on the remote control. Programming code numbers for the
corresponding component can be found on the following pages. If the code is correct, the device will turn
off.
5
Press the M E N U button to store the code.
6
Test the remote control functions to see if the component responds correctly. If not, repeat from step 2.
APPENDIX
103
APPENDIX
HDSTB
Brand
ALPHASTAR DSR
AMPLICA
BIRDVIEW
CHANNEL MASTER
Codes
123
050
051
013
036
CHAPARRAL
008
CITOH
054
CURTIS MATHES
050
DRAKE
005
011
141
DX ANTENNA
024
ECHOSTAR
038
093
097
122
ELECTRO HOME
089
EUROPLUS
114
FUJITSU
017
133
GENERAL INSTRUMENT 003
031
HITACHI
139
APPENDIX
104
Brand
126 129
014 015 018
055
009 012 077
145
006 007 010
052 112 116
046
040
094
098
056
057
095
099
076
058
096
100
021 022 027
134
004 016 029
059 101
140
Codes
HOUSTON TRACKER 033
057
HUGHES
068
JANIEL
060
JERROLD
061
KATHREIN
108
LEGEND
057
LG
001
LUTRON
132
LUXOR
062
MACOM
010
065
MEMOREX
057
NEXTWAVE
028
NORSAT
069
PACE SKY SATELLITE 143
PANASONIC
060
PANSAT
121
PERSONAL CABLE
117
PHILIPS
071
PICO
105
PRESIDENT
019
PRIMESTAR
030
037 039 051
104
147
144
059 063 064
124 125
070
142
102
110 111
Brand
PROSAT
RCA
REALISTIC
SAMSUNG
SATELLITE SERVICE CO
Codes
072
066
043
123
028
085
SCIENTIFIC ATLANTA 032
SONY
103
STARCAST
041
SUPER GUIDE
020
TEECOM
023
088
137
TOSHIBA
002
UNIDEN
016
044
078
10
VIEWSTAR
115
WINEGARD
128
ZENITH
081
091
106
074
035 047 057
138
124 125
026 075 087
090 107 130
127
025
045
079
135
042 043
048 049
080 086
136
146
082 083 084
120
IR CODES
1. How to Connect
A
Connect your wired remote control to the Remote Control port on the TV.
2. Remote Control IR Codes
A
Output waveform
Single pulse, modulated with 37.917KHz signal at 455KHz
Carrier frequency
Tc
FCAR = 1/TC = fOSC/12
Duty ratio = T1/TC = 1/3
T1
A
Configuration of frame
1st frame
Lead code
Low custom code
High custom code
Data code
Data code
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
Repeat frame
Repeat code
A
Tf
Lead code
9 ms
4.5 ms
A
Repeat code
0.55 ms
9 ms
A
2.25 ms
Bit description
Bit ”0”
Bit ”1”
2.24 ms
1.12 ms
A
Frame interval: Tf
The waveform is transmitted as long as a key is depressed.
Tf
APPENDIX
0.56 ms
0.56 ms
Tf
Tf=108ms @455KHz
105
APPENDIX
Code (Hexa)
08
0B
f0
45
43
AB
07
06
40
41
44
28
AA
30
02
03
00
01
1E
09
10 ~19
53
1A
72
71
63
61
20
21
39
BD
7E
APPENDIX
106
Function
POWER
INPUT
TV/RADIO
Q.MENU
MENU
GUIDE
Left ( )
Right ( )
Up ( )
Down ( )
OK( )
RETURN
INFO i
AV MODE
+
P
P
FAV
MUTE
Number Key 0~9
LIST
Q.VIEW
RED Key
GREEN Key
YELLOW Key
BLUE Key
TEXT
T.Option
SUBTITLE
Ô(Record)
SIMPLINK
Note
R/C BUTTON (POWER ON/OFF)
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
EXTERNAL CONTROL DEVICE SETUP
RS-232C Setup
Connect the RS-232C (serial port) input jack to an external control device (such as a computer or
an A/V control system) to control the product’s functions externally.
Connect the serial port of the control device to the RS-232C jack on the product back panel.
Note: RS-232C connection cables are not supplied with the product.
AUDIO
RGB IN
AV OUT
ANTENNA IN
DIGITAL VIDEO OUT
AUDIO OUT
OPTICAL
AUDIO
(RGB/DVI)
AUDIO
AUDIO
VIDEO
VIDEO (RGB/DVI)
RGB IN(PC)
HDMI/DVI IN
RGB IN
COMPONENT IN
or
RS-232C IN
(CONTROL & SERVICE)
AUDIO OUT
2
L
R
1
AUDIO
NENT IN
AV IN 1
1
2
VIDEO
/MONO AUDIO
Type of Connector; D-Sub 9-Pin Male
Pin Name
1
2
3
4
5
6
7
8
9
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connection
1
5
6
9
APPENDIX
No.
107
APPENDIX
RS-232C Configurations
7-Wire Configurations (Standard RS-232C cable)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
8
7
D-Sub 9
D-Sub 9
TXD
RXD
GND
DSR
DTR
CTS
RTS
3-Wire Configurations(Not standard)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
7
8
D-Sub 9
D-Sub 9
TXD
RXD
GND
DTR
DSR
RTS
CTS
Set ID
Use this function to specify a set ID number.
Refer to ‘Real Data Mapping’. G p .112
OPTION
Subtitle
Move
OK
: Off
Input Label
1 MENU
OPTION
Subtitle
Move
OK
: Off
Input Label
SIMPLINK
: On
SIMPLINK
Key Lock
: Off
Key Lock
: Off
Set ID
:1
Set ID
:1
Power Indicator
Power Indicator
Factory Reset
Factory Reset
: On
F
1
G
Close
Select O P T I O N.
APPENDIX
2
OK
3
OK
Select S e t I D.
Adjust Set ID to choose the desired TV ID number.
The adjustment range of SET ID is 1~99.
• Press R E T U R N to move to the previous menu screen.
108
Communication Parameters
Baud rate : 9600 bps (UART)
Data length : 8 bits
A Parity : None
Stop bit : 1 bit
Communication code : ASCII code
A Use a crossed (reverse) cable.
A
A
A
A
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
Command Reference List
COMMAND COMMAND
DATA
1
2
(Hexadecimal)
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
j
j
m
m
m
m
x
a
c
d
e
f
g
h
i
j
k
l
m
t
u
z
u
v
a
b
c
g
b
00 ~ 01
Refer to p. 110
00 ~ 01
00 ~ 01
00 ~ 64
00 ~ 64
00 ~ 64
00 ~ 64
00 ~ 64
00 ~ 64
00 ~ 01
00 ~ 01
00 ~ 64
00 ~ 02
00 ~ a
01
Refer to p. 112
Refer to p. 112
00 ~ 01
Key Code
00 ~ 64
Refer to p. 113
* When setting the 15 ~ 22, a menu does not appear on
screen.
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The set transmits ACK (acknowledgement) based on
this format when receiving normal data. At this time, if
the data is data read mode, it indicates present status
data. If the data is data write mode, it returns the
data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* The set transmits ACK (acknowledgement) based on
this format when receiving abnormal data from
non-viable functions or communication errors.
APPENDIX
01. Power
02. Aspect Ratio
03. Screen Mute
04. Volume Mute
05. Volume Control
06. Contrast
07. Brightness
08. Colour
09. Tint
10. Sharpness
11. OSD Select
12. Remote control lock mode
13. Balance
14. Colour Temperature
15. Abnormal Status
16. Auto Configuration
17. Equalize
18. Tune Command
19. Channel Add/Skip
20. Key
21. Control Back Light
22. Input select (Main)
* [Command 1] : First command to control the TV.
(j, k, m or x)
* [Command 2] : Second command to control the TV.
: You can adjust the set ID to choose
* [Set ID]
desired monitor ID number in option
menu. Adjustment range is 1 ~ 99.
When selecting Set ID ‘0’, every connected set is controlled.
Set ID is indicated as decimal (1~99) on
menu and as Hexa decimal (0x0~0x63)
on transmission/receiving protocol.
: To transmit command data.
* [DATA]
Transmit ‘FF’ data to read status of command.
: Carriage Return
* [Cr]
ASCII code ‘0x0D’
[
]
:
ASCII code ‘space (0x20)’
*
Data 00: Illegal Code
109
APPENDIX
01. Power (Command: k a)
0 4 . V o l u m e M u t e (C o m m a n d : k e )
G To control Power On/Off of the set.
G To control volume mute on/off.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
You can also adjust mute using the MUTE button on
remote control.
Transmission
Data 00 : Power Off
Ack
[k][e][ ][Set ID][ ][Data][Cr]
01 : Power On
G To show Power On/Off.
Data 00 : Volume mute on (Volume off)
01 : Volume mute off (Volume on)
Ack
Transmission
[e][ ][Set ID][ ][OK/NG][Data][x]
[a][ ][Set ID][ ][OK/NG][Data][x]
[k][a][ ][Set ID][ ][FF][Cr]
0 5 . V o l u m e C o n t r o l (C o m m a n d : k f )
Ack
G To adjust volume.
[a][ ][Set ID][ ][OK/NG][Data][x]
* Similarly, if other functions transmit ‘0xFF’ data based
on this format, Acknowledgement data feed back presents status about each function.
* OK Ack., Error Ack. and other message may display on
the screen when TV is power On.
You can also adjust volume with the VOLUME buttons on
remote control.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
0 2 . A s p e c t R a t i o (C o m m a n d : k c ) ( M a i n P i c t u r e S i z e )
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 112.
Ack
G To adjust the screen format. (Main picture format)
[f][ ][Set ID][ ][OK/NG][Data][x]
You can also adjust the screen format using the
A s p e c t R a t i o in the Q.MENU. or PICTURE menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 01 : Normal screen (4:3)
02 : Wide screen (16:9)
04 : Zoom1
05
06
07
09
:
:
:
:
Zoom2
Original
14:9
Just Scan
0 6 . C o n t r a s t (C o m m a n d : k g )
G To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Ack
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 112.
Ack
[c][ ][Set ID][ ][OK/NG][Data][x]
[g][ ][Set ID][ ][OK/NG][Data][x]
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
* In HDMI/Component (over 720p) mode, J u s t S c a n is
available.
G To adjust screen brightness.
0 7 . B r i g h t n e s s (C o m m a n d : k h )
You can also adjust brightness in the PICTURE menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
0 3 . S c r e e n M u t e (C o m m a n d : k d )
G To select screen mute on/off.
APPENDIX
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 00 : Screen mute off (Picture on)
01 : Screen mute on (Picture off)
Ack
[d][ ][Set ID][ ][OK/NG][Data][x]
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 112.
Ack
[h][ ][Set ID][ ][OK/NG][Data][x]
0 8 . C o l o u r (C o m m a n d : k i )
G To adjust the screen colour.
You can also adjust colour in the PICTURE menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 112.
Ack
[i][ ][Set ID][ ][OK/NG][Data][x]
110
0 9 . T i n t (C o m m a n d : k j )
1 3 . B a l a n c e (C o m m a n d : k t )
G To adjust the screen tint.
G To adjust balance.
You can also adjust tint in the PICTURE menu.
Transmission
You can also adjust balance in the AUDIO menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
[k][t][ ][Set ID][ ][Data][Cr]
Data Red : 00 ~ Green : 64
* Refer to ‘Real data mapping 1’. See page 112.
Ack
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 112.
Ack
[j][ ][Set ID][ ][OK/NG][Data][x]
[t][ ][Set ID][ ][OK/NG][Data][x]
1 4 . C o l o u r T e m p e r a t u r e (C o m m a n d : k u )
G To adjust colour temperature. You can also adjust Colour
1 0 . S h a r p n e s s (C o m m a n d : k k )
G To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 112.
Ack
[k][ ][Set ID][ ][OK/NG][Data][x]
Temperature in the PICTURE menu.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 00: Medium 01:Cool
Ack
02: Warm
[u][ ][Set ID][ ][OK/NG][Data][x]
1 5 . A b n o r m a l S t a t e (C o m m a n d : k z )
G To recognize an abnormal state.
Transmission
[k][z][ ][Set ID][ ][FF][ ][Cr]
1 1 . O S D S e l e c t (C o m m a n d : k l )
G To select OSD (On Screen Display) on/off when
controlling remotely.
Data FF : Read
Ack
Transmission
Data 00: Normal (Power on and signal exist)
01: No signal (Power on)
02: Turn the TV off by remote control
03: Turn the TV off by sleep time function
04: Turn the TV off by RS-232C function
05: 5V down
06: AC down
07: Turn the TV off by Fan Alarm function
08: Turn the TV off by Off time function
09: Turn the TV off by Auto sleep function
a: Turn the TV off by AV board detection.
[k][l][ ][Set ID][ ][Data][Cr]
Data 00 : OSD off
Ack
01 : OSD on
[l][ ][Set ID][ ][OK/NG][Data][x]
1 2 . Remote control lock mode ( C o m m a n d : k m )
G To lock the front panel controls on the monitor and
[z][ ][Set ID][ ][OK/NG][Data][x]
* This function is “read only”.
[k][m][ ][Set ID][ ][Data][Cr]
1 6 . A u t o C o n f i g u r e (C o m m a n d : j u )
Data 00 : Lock off
Ack
G To adjust picture position and minimize image shaking
01 : Lock on
[m][ ][Set ID][ ][OK/NG][Data][x]
* If you are not using the remote control, use this mode.
When main power is on/off, external control lock is
released.
automatically. It works only in RGB (PC) mode.
Transmission
APPENDIX
remote control.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 01: To set
Ack
[u][ ][Set ID][ ][OK/NG][Data][x]
111
APPENDIX
17. Equalize (Command : j v)
1 8 . T u n e C om m a n d (C o m m a n d : m a )
G To adjust equalize.
G Select channel to following physical number.
Transmission
Transmission
[j][v][ ][Set ID][ ][Data][Cr]
[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr]
MSB
Data :
LSB
0
0
0
0
Frequency
Frequency : 0
1
2
3
4
5
6
Data : Step (0 ~ 31step)
Ack
0
0
0
0
Data
120Hz
200Hz
500Hz
1.2kHz
3kHz
7.5kHz
12kHz
Data00 : High channel data
Data01 : Low channel data
ex. No. 47 -> 00 2F (2FH)
No. 394 -> 01 88 (188H),
DTV No. 0 -> Don’t care
Data020x00 : ATV Main
0x10 : DTV Main
Channel data range
Analogue - Min: 00 ~ Max: 63 (0~99)
Digital - Min: 00 ~ Max: 3E7 (0~999)
Ack
[a][ ][Set ID][ ][OK/NG][Data][x]
Data Min: 00 ~ Max: FF
[v][ ][Set ID][ ][OK/NG][Data][x]
* Euqalize command expression
4
3
2
1
0
Frequency
7
6
5
0
0
0
120Hz
0
0
1
200Hz
19. Channel Add/Skip(Command: m b)
0
1
0
500Hz
G To set skip status for the current Programme.
0
1
1
1.2KHz
1
0
0
3KHz
1
0
1
7.5KHz
Data 00 : Skip
1
1
0
12KHz
Ack
[b][ ][Set ID][ ][OK/NG][Data][x]
Step
7
6
5
4
3
2
1
0
OSD
Value
0
0
0
0
0
-24
..
..
..
..
..
..
0
1
1
1
1
0
..
..
..
..
..
..
1
1
1
1
1
24
Transmission
[m][b][ ][Set ID][ ][Data][Cr]
* Real data mapping 1
APPENDIX
Ex) 500Hz, Step 20: [j][v][ ][Set ID][ ][54][Cr]
010 10100 => 01010100 = 54 (Hex)
00 :
3 bits of Frequency and 5 bits of Data (Step) makes 8
Bit (1 byte).
Change 8 bit to Hex value.
F : Step 15 (Set ID 15)
10 : Step 16 (Set ID 16)
* OSD Value = [(Step+1)*48/32-24]
Step 0
A : Step 10 (Set ID 10)
64 : Step 100
6E : Step 110
73 : Step 115
74 : Step 116
C7: Step 199
FE : Step 254
FF : Step 255
112
01 : Add
* Real data mapping 2
00 :-40
01 :-39
02 :-38
28 :0
4E : +38
4F : +39
50 : +40
20. Key(Command: m c )
G To send IR remote key code.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data Key code - Refer to page 106.
Ack
[c][ ][Set ID][ ][OK/NG][Data][x]
2 2 . I n p u t s e l e c t (C o m m a n d : x b )
(Main Picture Input)
G To select input source for main picture.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data Structure
MSB
0
2 1 . C o n t r o l B a c k L i g h t (C o m m a n d : m g )
G To Cont rol t he back light.
Transmission
[m][g][ ][Set ID][ ][Data][Cr]
Data : data Min: 00 ~ Max: 64 ( * transmit by Hexadecimal code)
Ack
LSB
0
0
0
0
0
0
External Input
Input Number
External Input
Data
0
0
0
0
DTV
0
0
0
1
Analogue
0
0
1
0
AV
0
1
0
0
Component
0
1
0
1
RGB-PC
1
0
0
1
HDMI/DTV-PC
0
[g][ ][Set ID][ ][OK/NG][Data][x]
Input Number
Data
0
0
0
0
Input1
0
0
0
1
Input2
0
0
1
0
Input3
0
0
1
1
Input4
Ack
[b][ ][Set ID][ ][OK/NG][Data][x]
APPENDIX
113
Download PDF