LG | 60PS40FD | LG 42PQ20D Owner’s Manual

ENGLISH
PLASMA TV
OWNER’S MANUAL
PLASMA TV MODELS
4 2 P Q 2* * *
5 0 P Q 2* * *
4 2 P Q 6* * *
5 0 P Q 6* * *
5 0 P S 3* * *
6 0 P S 4* * *
60PS6***
Please read this manual carefully before operating
your TV.
Retain it for future reference.
Record the model number and serial number of the
TV.
Refer to the label on the back cover and quote this
information.
To your dealer when requiring any service.
Trade Mark of the DVB Digital Video
Broadcasting Project (1991 to 1996)
I D N u m b e r ( s ) : 6028: 42PQ20D-AA
6027: 50PQ20D-AA
6043: 42PQ60D-AA
6042: 50PQ60D-AA
6339: 50PS30FD-AA
6610: 60PS40FD-AA
6765: 60PS60FD-AA
This product qualifies for ENERGY STAR
Home Use
in the “factory default (H
mode)” setting and this is the setting in
which power savings will be achieved.
Changing the factory default picture setting or enabling other features will
increase power consumption that could
exceed the limits necessary to qualify for
Energy Star rating.
HDMI TM , the HDMI logo and HighDefinition Multimedia Interface
are trademarks or registered
trademarks of HDMI Licensing.
ACCESSORIES
RAT
IO
ENER
GY
Owner's
Manual
SAVIN
G
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the
dealer where you purchased the TV.
■ Image shown may differ from your TV.
or
ZE
EE
FR
Except for
60PS4***
RA
TIO
Batteries
Owner’s Manual
Remote Control
x2
x4
Power Cord
Protection Cover
(Refer to p.8)
Bolts for stand assembly
(Except for 60PS4***, 60PS6***)
(Refer to p.8)
Cable Holder
(Refer to p.8)
This item is not included for all models.
Polishing Cloth
Ferrite Core
(This item is not included for
all models.)
Polishing cloth for use on the screen.
* Lightly wipe any stains or fingerprints on the surface
of the TV with the polishing cloth.
Cable management clip
(Refer to p.8)
(Only 60PS4***, 60PS6***)
Do not use excessive force. This may cause scratching
or discolouration.
Wall Mounting Bracket
(Separate purchase)
AW-50PG60MS
(Except for 60PS4***, 60PS6***)
AW-60PG60MS
(Only 60PS4***, 60PS6***)
Use of ferrite core (This item is not included for all models.)
Ferrite core can be used to reduce the electromagnetic
wave when connecting the power cord.
The closer the location of the ferrite core to the power
plug, the better it is.
Install the power plug closely.
1
CONTENTS
ACCESSORIES
........................................
1
PREPARATION
CONTENTS
Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . 4
Back Panel Information . . . . . . . . . . . . . . . . . . . . 7
Stand Installation . . . . . . . . . . . . . . . . . . . . . . . . . 8
Not Using the desk-type stand . . . . . . . . . . . . . . .8
Back Cover for Wire Arrangement . . . . . . . . . . . . . 8
Careful installation advice . . . . . . . . . . . . . . . . . . . 9
Swivel Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Desktop Pedestal Installation . . . . . . . . . . . . . . . 10
Wall Mount: Horizontal Installation . . . . . . . . . . . 11
Antenna Connection . . . . . . . . . . . . . . . . . . . . . . 12
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . 13
DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
AV Output Setup . . . . . . . . . . . . . . . . . . . . . . . . 20
Digital Audio Out Setup . . . . . . . . . . . . . . . . . . 20
Other A/V Source Setup . . . . . . . . . . . . . . . . . . 21
Usb Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
- Screen Setup for PC Mode . . . . . . . . . . . . . 26
Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Selecting the Programme Table . . . . . . . . . . . . . 47
Input List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Input Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
AV Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Initializing (Reset to original factory settings) . . .54
TO USE A USB DEVICE
When connecting a USB device . . . . . . . . . . . . . 55
Photo List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Music List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Movie List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
DivX Registration Code . . . . . . . . . . . . . . . . . . . . . . . .67
Deactivation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
EPG (ELECTRONIC PROGRAMME
GUIDE) (IN DIGITAL MODE)
- Switch on/off EPG . . . . . . . . . . . . . . . . . . . . 69
- Select Programme . . . . . . . . . . . . . . . . . . . . 69
- Button Function in NOW/NEXT Guide Mode . . 70
- Button Function in 7 Day Guide Mode . . . . 70
- Button Function in Date Change Mode . . . . 71
- Button Function in Extended Description Box . . 71
- Button Function in Remind Setting Mode . . . . . . . . 72
- Button Function in Schedule List Mode . . . . 72
WATCHING TV / PROGRAMME CONTROL
Remote Control Key Functions . . . . . . . . . . . . . 30
Turning on the TV . . . . . . . . . . . . . . . . . . . . . . . 34
Programme Selection . . . . . . . . . . . . . . . . . . . . 34
Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . 34
Quick Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
On-Screen Menus Selection and Adjustment . . 36
Auto Programme Tuning . . . . . . . . . . . . . . . . . . . 37
Manual Programme Tuning (In Digital Mode) . . 38
Manual Programme Tuning (In Analogue Mode) . . 39
Programme Edit . . . . . . . . . . . . . . . . . . . . . . . . . 41
In DTV/Radio Mode . . . . . . . . . . . . . . . . . . . . . . 42
In TV Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Software Update . . . . . . . . . . . . . . . . . . . . . . . . 44
2
PICTURE CONTROL
Picture Size (Aspect Ratio) Control . . . . . . . . . 73
ENERGY SAVING . . . . . . . . . . . . . . . . . . . . .75
Preset Picture Settings
- Picture Mode-Preset . . . . . . . . . . . . . . . . . . . 76
Manual Picture Adjustment
- Picture Mode-User option . . . . . . . . . . . . . . 77
Picture Improvement Technology . . . . . . . . . . . 78
Expert Picture Control . . . . . . . . . . . . . . . . . . . . 80
Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Image Sticking Minimization (ISM) Method . . . 84
Demo Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Mode Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Auto Volume Leveler . . . . . . . . . . . . . . . . . . . . . . 87
Preset Sound Settings - Sound Mode . . . . . . . . 88
Sound Setting Adjustment -User Mode . . . . . . 89
SRS TruSurround XT . . . . . . . . . . . . . . . . . . . . . 90
Clear Voice II . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
TV Speakers On/ Off Setup . . . . . . . . . . . . . . . 93
Selecting Digital Audio Out . . . . . . . . . . . . . . . . 94
Audio Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Stereo Reception (In Analogue Mode Only) . . . . . . . . . . . . . 96
Speaker Sound Output Selection . . . . . . . . . . . 96
Switch on/off . . . . . . . . . . . . . . . . . . . . . . . . . . 105
SIMPLE Text . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
TOP Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
FASTEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Special Teletext Functions . . . . . . . . . . . . . . . . 106
CONTENTS
SOUND CONTROL
TELETEXT (IN DIGITAL MODE ONLY)
APPENDIX
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 107
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Product Specifications . . . . . . . . . . . . . . . . . . . 110
IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
External Control Device Setup . . . . . . . . . . . . . 113
TIME SETTING
Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Auto On/ Off Timer Setting . . . . . . . . . . . . . . . 98
Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . 99
PARENTAL CONTROL / RATINGS
Set Password & Lock System . . . . . . . . . . . . . . 100
Block Programme . . . . . . . . . . . . . . . . . . . . . . . .101
Parental Control (In Digital Mode Only) . . . . . 102
Input Block . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
3
PREPARATION
FRONT PANEL CONTROLS
■
Image shown may differ from your TV.
CAUTION
G When
PREPARATION
the TV cannot be turned on with the remote control, press the main power button on the TV
(When the power is turned off with the main power button on the TV, it will not be turned on with the
remote control.)
42/50PQ6***, 60PS6***
P
PROGRAMME
P
VOLUME
OK
OK
MENU
MENU
INPUT
INPUT
Remote Control
Sensor
MENU
INPUT
OK
P
Intelligent Sensor
Adjusts picture according to the surrounding
conditions
Power/Standby Indicator
• Illuminates red in standby mode.
• The LED is off while the TV remains on.
4
POWER
42/50PQ2***
Remote Control
Sensor
PREPARATION
Intelligent Sensor
Adjusts picture according
to the surrounding
conditions
Power/Standby Indicator
• Illuminates red in standby mode.
• Illuminates blue when the TV is
switched on.
INPUT
INPUT
INPUT
MENU
50PS3
MENU *** OK
OK
P
OK
MENU
INPUT
MENU
P
OK
PROGRAMME
VOLUME
POWER
P
Remote Control
Sensor
Intelligent Sensor
Adjusts picture according
to the surrounding
conditions.
Power/Standby Indicator
• Illuminates red in standby mode.
• Illuminates blue when the TV is switched on.
MENU
INPUT
INPUT
INPUT
MENU
OK
OK
INPUT
MENU
P
P
OK
MENU
OK
VOLUME
P
PROGRAMME
POWER
5
PREPARATION
■
Image shown may differ from your TV.
60PS4***
PREPARATION
Remote Control Sensor
POWER Button
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates green when the TV is
switched on.
MENU
INPUT
INPUT
MENU
INPUT
6
P
OK
P
OK
MENU
INPUT
OK
MENU
OK
P
VOLUME
PROGRAMME
3
A
Image shown may differ from your TV.
R
AV IN 2
1
11
3
3
2
PREPARATION
VIDEO L/MONO AUDIO R S-VIDEO
BACK PANEL INFORMATION
2
COMPONENT IN
AUDIO IN
(RGB/DVI)
AV
IN1
4
5
6
7
OUT
1
VARIABLE AUDIO OUT
R - AUDIO - L
R-AUDIO-L(MONO)
VIDEO
VIDED
1
2
9
8
L/MONO
MONO AUDIO R S-VIDEO
VIDEO L/
4
12
7
AV IN 2
10
7
Audio/Video Input (AV IN1 / AV IN2)
Connect audio/video output from an external
device to these jacks.
2
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of equipment.
Use to connect to a Digital Audio Component.
Use an Optical audio cable.
8
AV Output
Connect second TV or monitor to the AV OUT
socket on the TV.
9
Component Input
Connect a component video/audio device to
these jacks.
10
Antenna Input
Connect RF antenna to this jack.
11
USB Input
Connect USB storage device to this jack.
12
S-Video Input
Connect S-Video out from an S-VIDEO device.
3
4
5
6
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
HDMI Input
Connect a HDMI signal to HDMI IN or DVI (VIDEO)
signal to HDMI/DVI port with DVI to HDMI cable.
RGB IN Input
Connect the output from a PC.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
COMPONENT IN
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
COMPONENT IN
1
7
PREPARATION
STAND INSTALLATION
(Except for 60PS4***, 60PS6***)
■
■
Image shown may differ from your TV.
When assembling the desk type stand, check whether the
bolt is fully tightened. (If not tightened fully, the product
can tilt forward after the product installation.) If you
tighten the bolt with excessive force, the bolt can deviate
from abrasion of the tightening part of the bolt.
PREPARATION
1
NOT USING THE DESK-TYPE STAND
■ Image shown may differ from your TV.
When installing the wall-mounted unit, use the protection cover. Insert
the P R O T E C T I O N C O V E R into the TV until clicking sound.
Carefully place the TV screen side down on a cushioned
surface to protect the screen from damage.
protection cover
BACK COVER FOR WIRE
ARRANGEMENT
■
Image shown may differ from your TV.
After Connecting the cables as necessary, install
CABLE HOLDER as shown and bundle the cables.
2
Assemble the TV as shown.
CABLE HOLDER
Only 60PS4***, 60PS6***
3
Fix the 4 bolts securely using the holes in the
back of the TV.
Install the C A B L E M A N A G E M E N T C L I P as shown.
CABLE
MANAGEMENT CLIP
How to remove the cable management clip
Hold the C A B L E M A N A G E M E N T C L I P with both
hands and pull it upward.
! NOTE
G
When assembling the stand,
make sure to distinguish and
assemble the front and rear
side of the stand correctly.
FRONT
! NOTE
8
G
Do not use the CABLE MANAGEMENT CLIP to
lift the TV.
- If the TV is dropped, you may be injured or the
TV may be damaged.
CAREFUL INSTALLATION ADVICE
You should purchase necessary components to fix the TV safety and secure to the wall from a hardware supplier.
Position the TV close to the wall to avoid the possibility of it falling when pushed.
A The instructions shown below are a safer way to set up the TV, by fixing it to the wall, avoiding the possibility
of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.
A
A
2
2
1
Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen then bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
2
Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the
wall.
PREPARATION
1
1
3
3
Use a sturdy rope or wire to tie the product for alignment. It is safer to tie the rope so it becomes horizontal between the wall and the product.
! NOTE
G
G
G
When moving the TV undo the cords first.
Use a platform or cabinet strong and large enough to support the size and weight of the TV.
To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.
9
PREPARATION
SWIVEL STAND
After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit
your viewing position.
PREPARATION
A
A
The TV can be installed in various ways such as on a wall, or on a desktop etc.
The TV is designed to be mounted horizontally.
EARTHING
Ensure that you connect the earth wire to prevent possible
electric shock. If grounding methods are not possible, have
a qualified electrician install a separate circuit breaker.
Do not try to earth the TV by connecting it to telephone
wires, lightening rods or gas pipes.
Power Supply
Circuit breaker
DESKTOP PEDESTAL INSTALLATION
For adequate ventilation allow a clearance of 4” (10cm) all around the TV.
4 inches
4 inches
4 inches
10
INPUT
MENU
OK
P
4 inches
WALL MOUNT: HORIZONTAL INSTALLATION
We recommend the use of a LG Brand wall mounting bracket when mounting the TV to a wall.
We recommend that you purchase a wall mounting bracket which supports VESA standard.
A LG recommends that wall mounting be performed by a qualified professional installer.
A
A
4 inches
4 inches
4 inches
4 inches
Model
VESA
(A * B)
42PQ2***
50PQ2***
42PQ6***
50PQ6***
50PS3***
60PS4***
60PS6***
400* 400
400* 400
400* 400
400* 400
400* 400
600* 400
600* 400
Standard
Screw Quantity
M6
M6
M6
M6
M6
M8
4
4
4
4
4
4
M8
4
PREPARATION
4 inches
A
B
! NOTE
Should Install wall mount on a solid wall perpendicular to the floor.
Should use a special wall mount, if you want to install it to ceiling or slanted wall.
G The surface that wall mount is to be mounted on should be of sufficient strength to support the weight of TV set;
e.g. concrete, natural rock, brick and hollow block.
G Installing screw type and length depends on the wall mount used. Further information, refer to the instructions
included with the mount.
G LG is not liable for any accidents or damage to property or TV due to incorrect installation:
- Where a non-compliant VESA wall mount is used.
- Incorrect fastening of screws to surface which may cause TV to fall and cause personal injury.
- Not following the recommended Installation method.
G
G
11
PREPARATION
■
To prevent damage do not connect to the mains outlet until all connections are made between the devices.
ANTENNA CONNECTION
For optimum picture quality, adjust antenna direction.
An antenna cable and converter are not supplied.
COMPONENT IN
PREPARATION
HDMI IN 3
■
VIDEO L/MONO AUDIO R S-VIDEO
■
Wall
Antenna
Socket
AV IN 3
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
RF Coaxial Wire (75 ohm)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
COMPONENT IN
Outdoor
Antenna
(VHF, UHF)
UHF
Signal
Amplifier
Antenna
VHF
■
COMPONENT IN
■
In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the
antenna as shown above.
If signal needs to be split for two TVs, use an antenna signal splitter for connection.
12
EXTERNAL EQUIPMENT SETUP
To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.
This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 42/50PQ6*** models.
■
■
Image shown may differ from your TV.
■
HD RECEIVER SETUP
■
This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive
Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.
Connect the video outputs (Y, PB, PR) of the digital set
top box to the C O M P O N E N T I N V I D E O jacks on the
TV.
2
Connect the audio output of the digital set-top box to
the C O M P O N E N T I N A U D I O jacks on the TV.
3
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
4
Select C o m p o n e n t 1 input source using the I N P U T
button on the remote control.
If connected to C O M P O N E N T I N 2 input, select
C o m p o n e n t 2 input source.
Signal
Component
HDMI
480i/576i
O
X
480p/576p
O
O
720p/1080i
O
O
1080p
O
O
(50Hz/60Hz only)
(24Hz/30Hz/50Hz/60Hz)
1
2
1
2
EXTERNAL EQUIPMENT SETUP
1
COMPONENT IN
Connecting with a component cables
13
EXTERNAL EQUIPMENT SETUP
Connecting a set-top box with an HDMI cable
EXTERNAL EQUIPMENT SETUP
1
Connect the digital set-top box to H D M I / D V I I N 1,
H D M I I N 2 or H D M I I N 3 jack on the TV.
2
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
3
Select H D M I 1, H D M I 2 or H D M I 3 input source using
the I N P U T button on the remote control.
2
1
1
! NOTE
G
Check your HDMI cable is over version 1.3.
If the HDMI cables don’t support HDMI version 1.3, it can
cause flickers or no screen display. In this case use the latest
cables that supprot HDMI version 1.3.
IN1
3
4
14
Turn on the digital set-top box. (Refer to the owner’s
manual for the digital set-top box.)
Select H D M I 1 input source using the I N P U T button
on the remote control.
COMPONENT IN
Connect the audio output of the digital set-top box to
the A U D I O I N ( R G B / D V I ) jack on the TV.
VIDEO
2
AV
1
R - AUDIO - L
Connect the digital set-top box to H D M I / D V I I N 1
jack on the TV.
VIDEO
1
AUDIO IN
(RGB/DVI)
2
R-AUDIO-L(MONO)
COMPONENT IN
Connecting with an HDMI to DVI cable
1
OUT
2
1
DVD SETUP
Connect the video outputs (Y, PB, PR) of the DVD to the
C O M P O N E N T I N V I D E O jacks on the TV.
2
Connect the audio outputs of the DVD to the
C O M P O N E N T I N A U D I O jacks on the TV.
3
Turn on the DVD player, insert a DVD.
4
Select C o m p o n e n t 1 input source using the I N P U T
button on the remote control.
If connected to C O M P O N E N T I N 2 input, select
C o m p o n e n t 2 input source.
5
Refer to the DVD player's manual for operating
instructions.
1
2
1
2
EXTERNAL EQUIPMENT SETUP
1
COMPONENT IN
Connecting with a component cables
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV
Video output ports
on DVD player
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
15
EXTERNAL EQUIPMENT SETUP
Connecting with a S-Video cable
1
EXTERNAL EQUIPMENT SETUP
16
2
Connect the S-VIDEO output of the DVD to the S V I D E O input on the TV.
Connect the audio outputs of the DVD to the A U D I O
input jacks on the TV.
3
Turn on the DVD player, insert a DVD.
4
Select A V 2 input source using the I N P U T button on
the remote control.
5
Refer to the DVD player's manual for operating
instructions.
HDMI IN 3
VIDEO
S-VIDEO
L
R
OUTPUT
SWITCH
1
2
ANT IN
ANT OUT
2
Connecting the HDMI cable
1
Connect the HDMI output of the DVD to the
H D M I / D V I I N 1, H D M I I N 2, or H D M I I N 3 jack on
the TV.
Select H D M I 1, H D M I 2 or H D M I 3 input source using
the I N P U T button on the remote control.
3
Refer to the DVD player's manual for operating
instructions.
1
1
! NOTE
G The
TV can receive video and audio signals simultaneously
when using a HDMI cable.
G If the DVD does not support Auto HDMI, you must set the
output resolution appropriately.
G Check that your HDMI cable is version 1.3 or higher.
If the HDMI cables don’t support HDMI version 1.3, flickering or no screen display can result. Please use the latest
cables that support at least HDMI version 1.3.
EXTERNAL EQUIPMENT SETUP
2
2
17
AV IN 1
AV OUT
VIDEO
VIDEO
L
L/MONO
EXTERNAL EQUIPMENT SETUP
AUDIO
AUDIO
R
R
VCR SETUP
To avoid picture noise (interference), allow adequate distance between the VCR and TV.
COMPONENT IN
■
R - AUDIO - L
EXTERNAL EQUIPMENT SETUP
R AUDIO L(MON
Connecting with a RF Cable
IN1
OUT
1
2
ANT OUT
S-VIDEO
ANT IN
OUTPUT
SWITCH
VIDEO
L
R
1
Wall Jack
2
Antenna
18
1
Connect the A N T O U T socket of the VCR to the A N T E N N A I N socket on the TV.
2
Connect the antenna cable to the A N T I N socket of the VCR.
3
Press the P L A Y button on the VCR and match the appropriate channel between the TV and VCR for
viewing.
Connecting with an RCA cable
1
V I D E O jacks between TV and
Connect the A U D I O/V
VCR. Match the jack colours (Video = yellow, Audio Left
= white, and Audio Right = red)
1
3
Insert a video tape into the VCR and press PLAY on
the VCR. (Refer to the VCR owner’s manual.)
2
Select A V 2 input source using the I N P U T button on
the remote control.
If connected to A V I N 1 input, select A V 1 input
source.
S-VIDEO
R
OUTPUT
SWITCH
! NOTE
G
L
VIDEO
ANT IN
ANT OUT
If you have a mono VCR, connect the audio cable from the
VCR to the A U D I O L / M O N O jack of the TV.
EXTERNAL EQUIPMENT SETUP
2
Connecting with a S-Video cable
Connect the audio outputs of the VCR to the A U D I O
input jacks on the TV.
3
Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
4
Select A V 2 input source with using the I N P U T button on
the remote control.
! NOTE
G
S-VIDEO
L
R
ANT IN
USB IN
VIDEO
HDMI IN 3
2
Connect the S-VIDEO output of the VCR to the S V I D E O input on the TV set. The picture quality is
improved; compared to normal composite (RCA cable)
input.
OUTPUT
SWITCH
1
ANT OUT
2
S-VIDEO
1
2
If both S-VIDEO and VIDEO sockets have been connected to
the S-VHS VCR simultaneously, only the S-VIDEO can be
received.
19
EXTERNAL EQUIPMENT SETUP
AV OUTPUT SETUP
The TV has a special signal output capability which allows you
EXTERNAL EQUIPMENT SETUP
2
VIDED
VIDEO
1
R - AUDIO - L
1
Connect the second TV or monitor to the TV’s AV OUT
jacks.
R-AUDIO-L(MONO)
to hook up the second TV or monitor.
AV
IN1
OUT
See the Operating Manual of the second TV or monitor
for further details regarding that device’s input settings.
! NOTE
G
G
Only Digital, Analogue mode can be used for AV out.
Component, RGB, HDMI input sources cannot be used for
AV out.
We recommend to use the AV OUT jacks for VCR recording.
VIDEO
L
R
DIGITAL AUDIO OUT SETUP
Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port.
If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL
AUDIO OUT terminal on the back of TV to a DVD Home Theater (or amp).
Connect one end of an optical cable to the TV Digital
Audio (Optical) Output port.
CAUTION
G Do
not look into the optical output port. Looking at the
laser beam may damage your vision.
! NOTE
G
20
When connecting with external audio equipments, such as
amplifiers or speackers, please turn the TV speakers off.
1
IN1
2
COMPONENT IN
Set the “TV Speaker option - Off ” in the AUDIO
menu.(Gp .92). Refer to the external audio equipment
instruction manual for operation.
VIDEO
3
AV
R - AUDIO - L
Connect the other end of the optical cable to the
digital audio (optical) input on the audio equipment.
COMPONENT IN
VIDED
2
AUDIO IN
(RGB/DVI)
R-AUDIO-L(MONO)
1
OUT
1
2
OTHER A/V SOURCE SETUP
Camcorder
Video Game Set
R
3
L
1
EXTERNAL EQUIPMENT SETUP
VIDEO
2
1
V I D E O jacks between TV and external equipment. Match the jack colours .
Connect the A U D I O/V
(Video = yellow, Audio Left = white, and Audio Right = red)
2
Select A V 2 input source with using the I N P U T button on the remote control.
If connected to A V I N 1 input, select A V 1 input source.
3
Operate the corresponding external equipment.
Refer to external equipment operating guide.
21
EXTERNAL EQUIPMENT SETUP
USB SETUP
3
EXTERNAL EQUIPMENT SETUP
22
1
1
Connect the USB device to the U S B I N jack on the TV.
2
2 connecting the U S B I N jacks, you use the U S B function. (G p .55)
After
PC SETUP
AV I
VIDEO
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
L/MONO
COMPONENT IN
VIDEO
R
VIDEO
AV
VIDEO
AUDIO
AV OUT
AUDIO IN
(RGB/DVI)
Connecting with a D-sub 15 pin cable
R - AUDIO - L
IN1
2
Connect the PC audio output to the A U D I O I N
( R G B / D V I ) jack on the TV.
3
Turn on the PC and the TV.
4
Select R G B input source using the INPUT button on
the remote control.
OUT
1
1
EXTERNAL EQUIPMENT SETUP
2
2
AUDIO
RGB OUTPUT
Connecting with a HDMI to DVI cable
2
AV
1
2
Connect the PC audio output to the A U D I O I N
( R G B / D V I ) jack on the TV.
3
Turn on the PC and the TV.
4
Select H D M I 1 input source using the INPUT button
on the remote control.
R - AUDIO - L VIDEO
1
Connect the DVI output of the PC to the H D M I / D V I
I N 1 jack on the TV.
COMPONENT IN
AUDIO IN
(RGB/DVI)
VIDEO
R
Connect the RGB output of the PC to the R G B I N
( P C ) jack on the TV.
R-AUDIO-L(MONO)
AUDIO
R-AUDIO-L(MONO)
L
1
IN1
OUT
1
2
DVI-PC OUTPUT
AUDIO
1
23
EXTERNAL EQUIPMENT SETUP
Supported Display Resolution
HDMI/DVI-DTV mode
RGB-PC, HDMI/DVI-PC mode
EXTERNAL EQUIPMENT SETUP
24
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
720x400
31.468
70.08
640x480
31.469
59.94
640x480
31.469
59.94
31.469
60.00
800x600
37.879
60.31
31.47
59.94
1024x768
48.363
60.00
31.50
60.00
31.25
50.00
37.50
50.00
44.96
59.94
1280x768
47.78
59.87
1360x768
47.72
59.8
1920x1080
(RGB-PC)
66.587
59.93
1920x1080
(HDMI-PC)
67.50
60.00
720x480
720x576
1280x720
1920x1080
45.00
60.00
28.125
50.00
33.72
59.94
33.75
60.00
27.000
24.00
33.75
30
56.25
50.00
67.433
59.94
67.50
60
! NOTE
G Avoid
G Connect
the audio cable from the PC to the
Audio input on the TV. (Audio cables are not
included with the TV).
G If using a sound card, adjust PC sound as
required.
G If required, adjust the settings for Plug and Play
functionality
G If the graphic card on the PC does not output
analogue and digital RGB simultaneously, connect
only one of either RGB or HDMI IN (or HDMI/DVI
IN) to display the PC output on the TV.
G If graphic card on the PC does output analogue
and digital RGB simultaneously, set the TV to
either RGB or HDMI; (the other mode is set to
Plug and Play automatically by the TV.)
G DOS mode may not work depending on the video
card if you use a HDMI to DVI cable.
G If you use too long an RGB-PC cable, there may
be interference on the screen. We recommend
using under 5m of cable. This provides the best
picture quality.
EXTERNAL EQUIPMENT SETUP
keeping a fixed image on the set’s screen
for prolonged periods of time. The fixed image
may become permanently imprinted on the
screen; use a screen saver when possible.
G There may be interference relating to resolution,
vertical pattern, contrast or brightness in PC
mode. Change the PC mode to another resolution
or change the refresh rate to another rate or
adjust the brightness and contrast on the menu
until the picture is clear.
If the refresh rate of the PC graphic card can not
be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.
G The synchronization input waveform for
Horizontal and Vertical frequencies are separate.
G We recommend using 1024x768, 60Hz
(42PQ6***/42PQ2***)/1360x768, 60Hz
(50PQ6***/50PQ2***)/1920x1080, 60Hz
(50PS3***/60PS4***/60PS6***) for the PC
mode, they provide the best picture quality.
G Connect the signal cable from the monitor output
port of the PC to the RGB (PC) port of the TV or
the signal cable from the HDMI output port of the
PC to the HDMI IN (or HDMI/DVI IN) port on the
TV.
25
EXTERNAL EQUIPMENT SETUP
Screen Setup for PC mode
Screen Reset
Returns Position, Size and Phase to the factory default settings.
This function works in the following mode : RGB[PC].
EXTERNAL EQUIPMENT SETUP
PICTURE
Move
SCREEN
OK
E
• Contrast
90
• Brightness
50
• Sharpness
70
• Colour
60
• Tint
0
RETURN Prev.
Auto Config.
Position
R
• Advanced Control
• Picture Reset
Move
Resolution
To Set
G
Size
Phase
Screen
Screen
Reset
1 MENU
2
G
Select P I C T U R E.
OK
Select S c r e e n.
OK
Select R e s e t.
OK
Select Y e s.
3
4
5
OK
Run R e s e t.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
26
Adjustment for screen Position, Size, Phase
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually.
This function works in the following mode : RGB[PC].
Move
SCREEN
OK
RETURN Prev.
Move
E
• Contrast
90
• Brightness
50
• Sharpness
70
• Colour
60
• Tint
0
Resolution
Auto Config.
D
Position
R
G
F
G
E
G
Size
• Advanced Control
• Picture Reset
Phase
Screen
Screen
EXTERNAL EQUIPMENT SETUP
PICTURE
Reset
1 MENU
Select P I C T U R E.
2
OK
Select S c r e e n.
OK
Select P o s i t i o n, S i z e or P h a s e.
3
4
Make appropriate adjustments.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
27
EXTERNAL EQUIPMENT SETUP
Selecting Resolution
To view a normal picture, match the resolution of RGB mode and selection of PC mode.
This function works in the following mode: RGB[PC]
EXTERNAL EQUIPMENT SETUP
SCREEN
PICTURE
Move
Resolution
E
• Contrast
90
• Brightness
50
• Sharpness
70
• Colour
• Tint
G
Auto Config.
RETURN Prev.
1024 x 768
1280 x 768
1360 x 768
Position
60
0
Move
OK
R
G
Size
• Advanced Control
• Picture Reset
Phase
Screen
Screen
Reset
1 MENU
2
Select P I C T U R E.
OK
Select S c r e e n.
OK
Select R e s o l u t i o n.
3
4
Select the desired resolution.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
28
Auto Configure (RGB [PC] mode only)
Automatically adjust the picture position and minimizes image instability. After adjustment, if the image is
still not correct, your TV is functioning properly but needs further adjustment.
SCREEN
PICTURE
Move
RETURN Prev.
Resolution
E
• Contrast
90
• Brightness
50
• Sharpness
70
• Colour
60
• Tint
Move
OK
0
Auto Config. G
Position
R
G
To Set
Size
• Advanced Control
• Picture Reset
Phase
EXTERNAL EQUIPMENT SETUP
Auto configure
This function is for automatic adjustment of the screen position, size, and phase The displayed image will be
unstable for a few seconds while the auto configuration is in progress.
Screen
Screen
Reset
1 MENU
2
Select P I C T U R E.
OK
Select S c r e e n.
OK
Select A u t o C o n f i g ..
OK
Select Y e s.
• If the position of the image is still not correct,
try Auto adjustment again.
• If picture needs to be adjusted again after Auto
adjustment in RGB (PC), you can adjust the
P o s i t i o n, S i z e or P h a s e.
3
4
5
OK
Run A u t o C o n f i g ..
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
29
WATCHING TV / PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS
(Only 42/50PQ2***)
When using the remote control, aim it at the remote control sensor on the TV.
TV/RAD Selects Radio, TV and DTV channel.
POWER
AV MODE It helps you select and set images and sounds when connecting AV devices.(G p . 5 3)
ENERGY SA
SAVING
VING
AV
V MODE
POWER Switches the TV on from standby or off to standby.
INPUT External input mode rotate in regular sequence.
WATCHING TV / PROGRAMME CONTROL
ENERGY Adjust the power saving mode of the TV.
SAVING
LIST
0~9 number Selects a programme.
button Selects numbered items in a menu.
Q.VIEW
Q.VIEW Returns to the previously viewed programme.
MUTE
LIST Displays the programme table.
THUMBSTICK Allows you to navigate the on-screen menus and adjust
(Up/Down/Left/Right) the system settings to your preference.
OK Accepts your selection or displays the current mode.
MENU Selects a menu.
Clears all on-screen displays and returns to TV viewing
from any menu.
MENU
RETURN / EXIT
RETURN(EXIT) Allows the user to move return one step in an interactive
application, EPG or other user interaction function.
1
Q.MENU INFO
i
Coloured These buttons are used for teletext (on T E L E T E X T
buttons models only) , P r o g r a m m e e d i t.
GUIDE MARK
FAV
1
TELETEXT These buttons are used for teletext.
BUTTONS For further details, see the ‘Teletext’ section.(G p . 1 0 6)
SUBTITLE Recalls your preferred subtitle in digital mode.
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu appears
at the screen.(G p . 4 9)
30
VOLUME UP Adjusts the volume.
/DOWN
POWER
ENERGY SA
SAVING
VING
AV
V MODE
MUTE Switches the sound on or off.
PAGE Move from one full set of screen information to the next
UP/DOWN one.
LIST
Q.VIEW
MUTE
SIMPLINK / Controls SIMPLINK or USB menu(Photo List and Music
USB Menu List.)
control buttons
Q. MENU Select the desired quick menu source. (Aspect Ratio,
Picture Mode, Sound Mode, Audio, Sleep Timer, USB
Eject.)(G p . 3 5)
INFO i Shows the present screen information.
WATCHING TV / PROGRAMME CONTROL
Programme Selects a programme.
UP/DOWN
GUIDE Shows programme schedule.(G p . 6 9)
MENU
FAV Displays the selected favourite programme.
RETURN / EXIT
MARK Check and un-check programmes in the USB menu.
Q.MENU INFO
i
GUIDE MARK
FAV
Installing Batteries
■
■
■
Open the battery compartment cover on the back and install the
batteries matching correct polarity (+with +,-with -).
Install two 1.5V AAA batteries. Do not mix old or used batteries
with new ones.
Close cover.
31
WATCHING TV / PROGRAMME CONTROL
(Except for 42/50PQ2***)
ENERGY Adjust the power saving mode of the TV.
SAVING
ENERGY SAVING
RATIO Selects your desired picture format.
RATIO
RA
TIO
POWER Switches the TV on from standby or off to standby.
INPUT External input mode rotate in regular sequence.
TV/RAD Selects Radio, TV and DTV channel.
WATCHING TV / PROGRAMME CONTROL
Q. MENU Select the desired quick menu source. (Aspect Ratio,
Picture Mode, Sound Mode, Audio, Sleep Timer, USB
Eject.) (G p .3 5)
MENU Selects a menu.
Clears all on-screen displays and returns to TV viewing
from any menu.
GUIDE Shows programme schedule. (G p .6 9)
THUMBSTICK Allows you to navigate the on-screen menus and adjust
(Up/Down/Left/ the system settings to your preference.
Right)
OK Accepts your selection or displays the current mode.
RETURN(EXIT) Allows the user to move return one step in an interactive application, EPG or other user interaction function.
INFO i Shows the present screen information.
AV MODE It helps you select and set images and sounds when
connecting AV devices. (G p . 5 3)
Coloured These buttons are used for teletext (on T E L E T E X T
buttons models only) , P r o g r a m m e e d i t.
1
FREEZE
1
TELETEXT These buttons are used for teletext.
BUTTONS For further details, see the ‘Teletext’ section. (G p . 1 0 6)
SUBTITLE Recalls your preferred subtitle in digital mode.
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu appears
at the screen. (G p .4 9)
32
FREEZE Pause the present picture at the screen. (It doesn’t work
at USB Mode.)
The TV Returns to normal viewing automatically if no signal is received or no operation is performed for 5 minutes.
ENERGY SAVING
VOLUME UP Adjusts the volume.
/DOWN
RATIO
RA
TIO
MARK Check and un-check programmes in the USB menu.
FAV Displays the selected favourite programme.
MUTE Switches the sound on or off.
PAGE Move from one full set of screen information to the next
UP/DOWN one.
0~9 number Selects a programme.
button Selects numbered items in a menu.
LIST Displays the programme table.
Q.VIEW Returns to the previously viewed programme.
SIMPLINK / Controls SIMPLINK or USB menu(Photo LIst and Music
USB Menu List or Movie List).
control buttons
WATCHING TV / PROGRAMME CONTROL
Programme Selects a programme.
UP/DOWN
Installing Batteries
FREEZE
■
Open the battery compartment cover on the back and install the
batteries matching correct polarity (+with +,-with -).
■
Install two 1.5V AAA batteries. Do not mix old or used batteries
with new ones.
■
Close cover.
33
WATCHING TV / PROGRAMME CONTROL
TURNING ON THE TV
- When your TV is turned on, you will be able to use its features.
WATCHING TV / PROGRAMME CONTROL
1
First, connect power cord correctly and check the main power(
2
Set ID: Off
In standby mode to turn TV on, press the INPUT or P D E button on the TV or press the
POWER button on the remote control and the TV will switch on.
Set ID: On
In standby mode to turn TV on, press the INPUT or P D E button on the TV or press the
POWER, INPUT, P
or NUMBER button on the remote control and the TV will switch on.
Initializing setup
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the
M o d e S e t t i n g, A u t o t u n i n g.
Note:
a. If you close without completing the initial setting, the Initial Setting menu can be displayed again.
b. Press the RETURN button to change the current OSD to the previous OSD.
H o m e U s e” mode is the optical setting for home environments, and is the TV's default mode.
c “H
S t o r e D e m o" mode is the optimal setting for store environments. If a user modifies image quality data,
d. "S
S t o r e D e m o” mode initializes the product to the image quality set by us after a certain period of time.
“S
H o m e U s e , S t o r e D e m o) can be changed by executing M o d e S e t t i n g in the O P T I O N
e. The mode (H
menu.
PROGRAMME SELECTION
1
Press the P
number.
or NUMBER buttons to select a programme
VOLUME ADJUSTMENT
1
Press the
+ or - button to adjust the volume.
If you wish to switch the sound off, press the MUTE button.
You can cancel this function by pressing the MUTE,
+ or - , AV Mode button.
34
) on the TV.
QUICK MENU
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
Q.Menu (Quick Menu) is a menu of features which users might use frequently.
• A s p e c t R a t i o: Selects your desired picture format.
• S l e e p T i m e r : Sets the sleep timer.
• U S B E j e c t : Selects “Eject” in order to eject USB
For Zoom Setting, select 14:9, Zoom and Cinema
Zoom in Ratio Menu. After completing Zoom Setting,
the display goes back to Q.Menu.
• P i c t u r e M o d e : Selects your desired Picture Mode.
• S o u n d M o d e : It is a feature to automatically set the
sound combination which it deems the best for the
images being watched. Selects your desired Sound
Mode.
• A u d i o : Selects the sound output.
device.
Aspect Ratio
F
16:9 G
Zoom Setting
Picture Mode
Standard
Sound Mode
Standard
Audio
L+R
Sleep Timer
Off
Eject
USB Eject
WATCHING TV / PROGRAMME CONTROL
Q.Menu
Close
1Q. MENU
Display each menu.
2
OK
or
Select your desired Source.
3
OK
• Press the Q . M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
35
WATCHING TV / PROGRAMME CONTROL
ON-SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
SETUP
Move
PICTURE
OK
Auto Tuning
Move
Programme Edit
Software Update
: 14:9
Energy Saving : Intelligent Sensor
Clear Voice I I
Picture Mode
: On
Diagnostics
Move
Auto Volume
Aspect Ratio
Manual Tuning
AUDIO
OK
: Off
• Level
: Standard
• Contrast
90
Balance
• Brightness
50
Sound Mode
WATCHING TV / PROGRAMME CONTROL
Move
Subtitle
70
• SRS TruSurround XT : Off
• Treble
50
• Bass
50
0
R
G
E
TIME
OK
: Off
: Off
ISM Method
: Normal
Demo Mode
: Off
Mode Setting
Move
OK
Move
OK
Clock
SETUP
: On
Set ID
R
60
Input Label
Key Lock
R
L
• Colour
: Off
SIMPLINK
L
: Standard
E
OPTION
3
0
• Sharpness
• Tint
OK
: Off
: Home Use
OPTION
PICTURE
AUDIO
LOCK
TIME
INPUT
Off Time
: Off
On Time
: Off
Sleep Timer
: Off
USB
E
LOCK
Lock System
Move
OK
INPUT
Move
OK
USB
Antenna
Photo List
Set Password
AV1
Music List
Block Programme
AV2
Movie List
Component1
DivX Reg. Code
Component2
Deactivation
Parental Guidance
: Off
: Off
Input Block
RGB
HDMI1
HDMI2
E
(Except for 42/50PQ2***)
1 MENU
2
OK
Display each menu.
Select a menu item.
3
• Press the M E N U button to return to normal TV viewing.
OK
36
Move to the pop up menu.
• Press the R E T U R N button to move to the previous menu screen.
AUTO PROGRAMME TUNING
Use this to automatically find and store all available programmes.
When you start auto programming, all previously stored service information will be deleted.
The maximum number of programmes that can be stored is 500. But the number may differ slightly depending
on broadcasting signals.
Move
OK
SETUP
Auto Tuning
Auto Tuning
Manual Tuning
Manual Tuning
OK
Programme Edit
Programme Edit
Software Update
Move
: On
Diagnostics
Software Update
Diagnostics
: On
All service-information will be updated.
Continue?
Yes
1 MENU
Select S E T U P.
No
• Use NUMBER buttons to input a 4-digit pass-
O n’.
word in L o c k S y s t e m ‘O
2
OK
Select A u t o T u n i n g.
OK
Select Y e s.
OK
Run A u t o T u n i n g.
WATCHING TV / PROGRAMME CONTROL
SETUP
• If you wish to keep on auto tuning select Y e s
using the
button. Then, press the OK button. Otherwise select N o.
3
4
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
37
WATCHING TV / PROGRAMME CONTROL
MANUAL PROGRAMME TUNING (IN DIGITAL MODE)
Manual Tuning lets you manually add a programme to your programme list.
SETUP
Move
SETUP
OK
WATCHING TV / PROGRAMME CONTROL
Auto Tuning
Auto Tuning
Manual Tuning
Manual Tuning
Programme Edit
Software Update
Programme Edit
: On
Software Update
Diagnostics
Move
OK
F
DTV
G
Your receiver will add this
channel to your channel list.
: UHF
On CH.
43
Diagnostics
Bad
Normal
Good
Update
Close
1 MENU
Select S E T U P.
• Use NUMBER buttons to input a 4-digit pass-
O n’.
word in L o c k S y s t e m ‘O
2
Select M a n u a l T u n i n g.
OK
3
Select D T V.
OK
4
Select the desired channel number.
5
OK
Select update or add if signal present.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
38
MANUAL PROGRAMME TUNING (IN ANALOGUE MODE)
Manual Tuning lets you manually tune and arrange the stations in whatever order you desire.
SETUP
Move
SETUP
OK
Move
Auto Tuning
Auto Tuning
Manual Tuning
Manual Tuning
Programme Edit
Programme Edit
: On
Software Update
Diagnostics
Diagnostics
TV
F
Storage
G
1
: OnBand
V/UHF
Channel
0
Search
F G
Name
C 00
Store
Close
1 MENU
Select S E T U P.
5
Select V / U H F or C a b l e.
6
2
OK
or
Select M a n u a l T u n i n g.
1
2
3
4
5
6
7
8
9
Select the desired
channel number.
0
7
3
OK
4
Commence searching.
Select T V.
8
or
1
2
3
4
5
6
7
8
9
Select the desired programme number on.
WATCHING TV / PROGRAMME CONTROL
Software Update
OK
OK
Select S t o r e.
0
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
O n’.
• Use NUMBER buttons to input a 4-digit password in L o c k S y s t e m ‘O
• To store another channel, repeat steps 4 to 8.
39
WATCHING TV / PROGRAMME CONTROL
SETUP
Move
SETUP
OK
Move
Auto Tuning
Auto Tuning
Manual Tuning
Manual Tuning
Programme Edit
Programme Edit
Software Update
: On
F
Software Update
Diagnostics
OK
Diagnostics
TV
G
Storage
3
: OnBand
V/UHF
Channel
0
Search
F G
Name
C 02
Store
WATCHING TV / PROGRAMME CONTROL
Close
A
Assigning a station name
You can assign a station name with five characters to each programme number.
1 MENU
Select S E T U P.
2
5
OK
Select M a n u a l T u n i n g.
OK
6
3
OK
Select C l o s e.
OK
Select S t o r e.
Select T V.
OK
Select the position and make
your choice of the second character, and so on.
You can use an the alphabet A
to Z , the number 0 to 9 , +/ -,
and blank.
7
4
OK
Select N a m e.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
40
PROGRAMME EDIT
When a programme number is skipped, it means that you will be unable to select it using P
button during TV
viewing.
If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or
select it in the Programme edit menu.
This function enables you to skip the stored programmes.
SETUP
Move
ABC TV Sydney
OK
RADIO
Manual Tuning
Programme Edit
Favourite List
: On
Diagnostics
TV
2 7 Digital
9 Nine Digital
Auto Tuning
Software Update
DTV
1 ABC TV Sydney
10 ABC2
11 ABC TV
12 ABC HDTV
13 ABC TV 1
14 ABC TV 2
70 7 HD Digital
71 7 Digital 1
72 7 Digital 2
73 7 Digital 3
77 7 Guide
90 Nine Digital HD
99 Nine Guide
100 ABC TV 3
E
FAV Favourite
Pr. Change
Navigation
P
Page Change
RETURN Previous
Skip
1 MENU
Select S E T U P.
WATCHING TV / PROGRAMME CONTROL
1
• Use NUMBER buttons to input a 4-digit pass-
O n’.
word in L o c k S y s t e m ‘O
2
OK
Select P r o g r a m m e E d i t.
3
OK
4
Enter the P r o g r a m m e E d i t.
Select a programme to be
stored or skipped.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
41
WATCHING TV / PROGRAMME CONTROL
IN DTV/RADIO MODE
A
Skipping a programme number
1
Select a programme number to be skipped.
2
BLUE Turn the skipped programme number to blue.
3
BLUE Release the skipped programme.
WATCHING TV / PROGRAMME CONTROL
42
A
• When programmes are to be skipped, the
skipped programme shows in blue and these
programmes will not be selected by the P
buttons during TV viewing.
• If you wish to select a skipped programme, directly
enter the programme number with the NUMBER buttons or select it in the programme edit or EPG.
Selecting favourite programme
1
MARK
FAV
Select your favourite programme
number.
• This will automatically include the selected pro-
gramme into your favourite programme list.
IN TV MODE
This function enables you to delete or skip the stored programmes.
You can also move some channels and use other programme numbers.
A
Deleting a programme
1
Select a programme number to be deleted.
• The selected programme is deleted, all the fol-
lowing programmes are shifted up one position.
2
RED Turn the deleted programme number to red.
RED Release the deleted programme.
A
Moving a programme
1
Select a programme number to be moved.
2
Turn the moved programme number to YELLOW.
YELLOW
3
YELLOW Release the moved programme.
A
WATCHING TV / PROGRAMME CONTROL
3
Skipping a programme number
1
Select a programme number to be skipped.
2
BLUE Turn the skipped programme number to blue.
3
• When a programme number is skipped it means
that you will be unable to select it using the P
button during normal TV viewing.
• If you wish to select a skipped programme, directly
enter the programme number with the NUMBER buttons or select it in the programme edit or EPG.
BLUE Release the skipped programme.
A
Selecting a Favourite Programme
1
MARK
FAV
Select your favourite programme number.
• The selected programme will be added to the
favourite programme list.
43
WATCHING TV / PROGRAMME CONTROL
SOFTWARE UPDATE
Software Update means software can be downloaded through the digital terrestrial broadcasting system.
SETUP
Move
OK
Auto Tuning
Manual Tuning
Manual Tuning
Programme Edit
WATCHING TV / PROGRAMME CONTROL
Software Update
Select S E T U P.
2
Select S o f t w a r e U p d a t e.
OK
Select O n or O f f.
• If you select O n, a user confirm
message box will be displayed to
notify that new software is
found.
3
OK
4
OK
44
Save.
Move
Programme Edit
On
:: On
Diagnostics
1 MENU
SETUP
Auto Tuning
Software Update
Diagnostics
Off
On
:: On
On
On
OK
* When setting “Software Update”
Occasionally, a transmission of
updated digital software information will result in the following
menu on the TV screen.
After the Software Update is
complete, the System restarts.
When the power is turned off, downloading
starts.
When the power is turned on while updating, the progress status is displayed.
- During Progress of a Software Update, please note the following:
• Power to the TV must not be interrupted.
• The TV must not be switched off.
• The antenna must not be disconnected.
• After Software Update, you can confirm the updated software version in Diagnostics menu.
• It may take an hour to download the software, so make sure that the power stays on during the download.
WATCHING TV / PROGRAMME CONTROL
When the Software Update
O f f", the message to
menu is "O
O n" appears.
change it to "O
Select the Y E S using the
button and you will see the following picture.
45
WATCHING TV / PROGRAMME CONTROL
DIAGNOSTICS
This function enables you to view information on the Manufacturer, Model/Type and Software Version.
This displays the information and signal strength of the tuned *MUX.
This displays the signal information and service name of the selected MUX.
(*MUX: A higher directory of channels in digital broadcasting (a single MUX contains multiple channels.))
WATCHING TV / PROGRAMME CONTROL
Engineering Diagnostics
SETUP
Move
Manufacturer : LG Electronics Inc.
Model/Type : 42PQ60D-AA
Software Version : V1.23.0
OK
Auto Tuning
Manual Tuning
Ch 8
Ch 9A
Programme Edit
Software Update
: On
Diagnostics
Ch 43
RETURN
1 MENU
MENU
Exit
Select D i a g n o s t i c s.
OK
OK
Popup
Select S E T U P.
2
3
Prev.
Display Manufacturer, Model/Type and Software Version.
4
OK
Display the information of Channel.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
46
SELECTING THE PROGRAMME TABLE
You can check which programmes are stored in the memory by displaying the programme table.
Mini Glossary
Displayed when the
Locked Programme.
Programme List
1 ABC TV Sydney
9 Nine Digital
10 ABC 2
A
Exit
Displaying programme LIST
1
Display the PROGRAMME LIST.
LIST
A
2
Select a programme.
OK
TV/RAD
From the programme you are currently watching, the mode will change
from TV to DTV to Radio.
Switch to the chosen programme number.
Paging through a programme list
1
P
A
have been set up to be skipped by auto programming or in the programme edit mode.
• Some programmes with the channel number
shown in the programme LIST indicate there is
no station name assigned.
Selecting a programme in the programme list
1
A
• You may find some blue programmes. These
WATCHING TV / PROGRAMME CONTROL
RETURN
P
A
G
E
Turn the pages.
2
LIST
Return to normal TV viewing.
Displaying the favourite programme table
1 MARK
Display the Favourite Programme table.
FAV
47
WATCHING TV / PROGRAMME CONTROL
INPUT LIST
HDMI and AV1, 2 can be recognized by a detect pin and thus enabled only when an external device approves voltage.
By using T V / R A D button, you can move from External Input to RF Input and to the last watched programme in
DTV/RADIO/TV mode.
Antenna
AV1
WATCHING TV / PROGRAMME CONTROL
HDMI3
AV2
HDMI2
HDMI1
Component2
RGB
1
Select the input source.
OK
INPUT
• You can also adjust INPUT menu.
INPUT
Move
Antenna
AV1
AV2
Component1
Component2
RGB
HDMI1
HDMI2
E
48
Component1
OK
• A n t e n n a : Select it when watching the DTV/TV.
• A V : Select it when watching the VCR or external
equipment.
• C o m p o n e n t : Select it when using the DVD or the
Digital set-top box depends on connector.
• R G B :Select it when using PC depends on connector.
• H D M I : Select it when using DVD, PC or Digital settop box depend on connector.
This function operates only with devices with the SIMPLINK logo.
Please check the SIMPLINK logo.
The product might not function properly when using it with other products with HDMI-CEC function.
This allows you to control and play other AV devices connected to the display through HDMI cable without
additional cables and settings.
O f f”.
If you do not want SIMPLINK menu, select “O
OPTION
Move
Subtitle
OK
: Off
Input Label
OPTION
Move
Subtitle
: Off
Input Label
Off
:: On
On
On
On
: Off
SIMPLINK
SIMPLINK
On
:: On
SIMPLINK
SIMPLINK
Key Lock
: Off
Key Lock
Set ID
: Off
Set ID
ISM Method
: Normal
ISM Method
: Normal
Demo Mode
: Off
Demo Mode
: Off
: Home Use
Mode Setting
Mode Setting
E
OK
: Off
: Home Use
E
1 MENU
WATCHING TV / PROGRAMME CONTROL
SIMPLINK function is not supported by HDMI IN 3 input.
Select O P T I O N.
2
OK
Select S I M P L I N K.
OK
Select O n or O f f.
3
4
OK
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
49
WATCHING TV / PROGRAMME CONTROL
Connecting to Home Theater with the SIMPLINK logo.
AV
IN
WATCHING TV / PROGRAMME CONTROL
3
R - AUDIO - L
/DVI IN
Connect the Digital Audio output terminal on the back
of the TV and the Digital Audio input terminal of the
Home Theater using optical cables.
VIDEO
2
1
2
IN1
1
COMPONENT IN
AUDIO IN
(RGB/DVI)
VIDEO
Connect the H D M I / D V I I N 1 or H D M I I N 2 terminal on the back of the TV and the HDMI output terminal of the Home Theater using HDMI cables.
R-AUDIO-L(MONO)
1
OUT
1
2
2
Select Home Theater in the Speaker menu by pushing the
S I M P L I N K button.
Home Theater
G
When you select or operate a media device with home theater
function, the speaker automatically switches to home theater
speaker (HT speaker).
! NOTE
Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the SIMPLINK device
with the HDMI cable.
G When you switch the Input source using the INPUT button on the remote control, you can stop the operation of a device
controlled by SIMPLINK
G When the unit is connected to SIMPLINK Home Theater, set to Variable Out and turn off the TV Speaker to operate the
Home Theater Speaker. At this time, the maximum volume of the Home Theater Speaker is set to the TV volume.
G
50
SIMPLINK Functions
Disc playback
Control connected AV devices by pressing the
, OK, G, A, l l, FF and GG buttons.
Direct Play
After connecting AV devices to the TV, you can directly control the devices and play media without additional settings.
Select AV device
Enables you to select one of the AV devices connected to the TV and operate it.
Switch audio-out
Offers an easy way to switch audio-out.
Sync Power on
When the equipment with Simplink function connected HDMI terminal starts to play, The TV will change automatically to turn on
mode.
* A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not provide this function.
Note: To operate SIMPLINK, an HDMI cable over Version 1.3 with *CEC function should be used. (*CEC: Consumer Electronics
Control).
SIMPLINK Menu
Press the
button and then OK button to select the desired SIMPLINK source.
1
T V v i e w i n g : Switch to the previous TV programme
regardless of the current mode.
2
D I S C p l a y b a c k : Select and play connected discs.
When multiple discs are available, the titles of discs are
conveniently displayed at the bottom of the screen.
3
V C R p l a y b a c k : Play and control the connected
VCR.
4
H D D R e c o r d i n g s p l a y b a c k : Play and control
recordings stored in HDD.
5
Audio Out to Home theater/Audio Out to TV:
Select Home theater or TV speaker for Audio Out.
WATCHING TV / PROGRAMME CONTROL
Power off all devices
When you switch off the TV, all connected devices are turned off.
1
2
Selected Device
3
When device is not connected (displayed in gray)
4
5
When a device is connected
(displayed in bright colour)
• Home theater: Only one supported at a time
• DVD, Recorder: Up to two supported at a time
• VCR: Only one supported at a time
51
WATCHING TV / PROGRAMME CONTROL
INPUT LABEL
Selects a label for each input source.
AV1
OPTION
Move
Subtitle
OK
: Off
Move
Subtitle
: Off
Input Label
Input Label
G
Component1
Component2
SIMPLINK
Key Lock
: Off
Key Lock
: Off
Set ID
: Off
Set ID
: Off
ISM Method
: Normal
ISM Method
: NormalHDMI2
Demo Mode
: Off
Demo Mode
: Off
Mode Setting
: Home Use
Mode Setting
WATCHING TV / PROGRAMME CONTROL
E
: On
F
OK
AV2
: On
SIMPLINK
1 MENU
OPTION
RGB
HDMI1
HDMI3
: Home Use
E
Close
Select OPTION.
2
OK
Select Input Label.
3
OK
Select the source.
4
Select the label.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
52
AV MODE
You can select the optimal images and sounds when connecting AV devices to external input.
Off
Cinema
Sport
Game
Off
Cinema
Game
Sport
Press the AV MODE button repeatedly to select the desired source.
WATCHING TV / PROGRAMME CONTROL
1AV MODE
Disables the AV MODE.
Optimizes video and audio for watching movies.
Optimizes video and audio for watching sports events.
Optimizes video and audio for playing games.
2
OK
• If you select C i n e m a in AV mode, C i n e m a will be selected both for
P i c t u r e M o d e and S o u n d M o d e in P I C T U R E menu and A U D I O
menu respectively.
O f f” in AV mode, the picture and image which you ini• If you select “O
tially set will be selected.
53
WATCHING TV / PROGRAMME CONTROL
Initializing
(Reset to original factory settings)
This function initializes all settings.
D a y and
N i g h t of the P i c t u r e M o d e cannot be initialized.
But the settings of
It is useful to initialize the product or when you move to other city.
When the Factory Reset is completed, you must restart the Initializing setup.
O n", the message to enter the password appears.
When the L o c k S y s t e m menu is "O
WATCHING TV / PROGRAMME CONTROL
OPTION
Move
OK
OPTION
Move
Input Label
Input Label
: On
SIMPLINK
Key Lock
: Off
Key Lock
: Off
Set ID
: Off
Set ID
: Off
ISM Method
: Normal
ISM Method
: Normal
Demo Mode
: Off
Demo Mode
: Off
Mode Setting
:Home Use
Mode Setting
:Home Use
SIMPLINK
: On
All user settings and channel setting will
be reset. Still Continue?
Yes
No
Factory Reset
Reset
Factory
Factory Reset
E
E
1 MENU
Select O P T I O N.
2
OK
Select F a c t o r y R e s e t.
O n", if you forget your password,
• In L o c k S y s t e m "O
press '7', '7', '7', '7' on the remote control handset.
3
OK
Select Y e s.
4
OK
Start Factory Reset.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
54
TO USE A USB DEVICE
When connecting a USB device
When you connect a USB device, this pop up menu is displayed, automatically.
If the Pop Up menu does not appear, you can select Music List or Photo List or Movie List(Except for
42/50PQ2***) in the USB menu.
“POP UP MENU” will not be displayed while the OSD including Menu, EPG or Schedule list is activated.
In USB device, you can not add a new folder or delete the existing folder.
■ Image shown may differ from your TV.
1 Connect the USB device to the U S B
IN
jacks on the side of TV.
USB memory stick
• This TV Supports on JPEG and MP3 and SD Divx.
When removing the USB device
2
Select P H O T O L I S T or M U S I C
L I S T or M O V I E L I S T(Except for
42/50PQ2***).
1Q. MENU
Select Eject.
2
PHOTO LIST
3
MUSIC LIST
MOVIE LIST
OK
OK
TO USE A USB DEVICE
Select the USB Eject menu before removing the
USB device.
Precautions when using the USB device
Only a USB storage device is recognizable.
If the USB storage device is connected through a USB hub, the device is not recognizable.
G A USB storage device using an automatic recognition programme may not be recognized.
G A USB storage device which uses its own driver may not be recognized.
G The recognition speed of a USB storage device may depend on each device.
G Please do not turn off the TV or unplug the USB device when the connected USB storage device is working.
When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged.
G Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may cause
the product to malfunction or fail to be played. Never forget to use only a USB storage device which has normal
music files or image files.
G Please use only a USB storage device which was formatted as a FAT16, FAT32, NTFS file system provided with the
Windows operating system. In case of a storage device formatted as a different utility programme which is not supported by Windows, it may not be recognized.
Data in a USB storage device cannot be deleted in the NTFS file system.
G Please connect power to a USB storage device which requires an external power supply. If not, the device may not
be recognized.
G Please connect a USB storage device with cable is offered by USB maker. If connected with cable is not offered by
USB maker or an excessively long cable, the device may not be recognized.
G Some USB storage devices may not be supported or operated smoothly.
G Maximum of 999 files and folders can be recognized.
G Data in a USB storage device cannot be aligned.
Up to 128 English characters can be recognized as a file name.
G Please back up the important file because a data of USB device may be damaged. Data management is consumer's
responsibility and in consequence the manufactures does not cover the product bearing data damage.
G If the USB is connected in Standby Mode, specific hard disk will automatically be loaded when the TV is turned on.
G The recommended capacity is 1TB or less for a USB external hard disk and 32GB or less for USB memory.
G Any device with more than the recommended capacity may not work properly.
G If a USB external hard disk with a “Power Saving” function does not work, turn the hard disk off and on again to
make it work properly.
G
G
55
TO USE A USB DEVICE
PHOTO LIST
The On Screen Display may be different from your TV.
Images are an example to assist with the TV operation.
PHOTO(*.JPEG) supporting file
Baseline: 15360 x 8640
Progressive format : 1024 x 768
• You can play JPEG files only.
• Only baseline scan is supported among JPEG (SOF0, SOF1 only).
• Non-supported files are displayed in the form of bitmap.
TO USE A USB DEVICE
Screen Components
1 MENU
2
OK
Select U S B.
2
1
Moves to upper level folder
2
Current page/Total pages
3
Total number of marked photos
4
Usable USB memory
5
Corresponding buttons on the
remote control
Page 1/2
photo
1460x970
1
Up Folder
Navigation
3
4
USB Device
Photo List
1460 X 970, 93KB
Option
5
56
Select Photo List.
OK
No Marked
Free Space 150MB
Up Folder
KY103
KY101
KY104
KY102
KY105
JMJ001
JMJ005
JMJ002
JMJ006
JMJ003
JMJ007
JMJ004
JMJ008
P
Page Change
MARK
Mark
RETURN
Exit
Photo Selection and PopUp Menu
USB Device
Photo List
Page 1/2
photo
1460x970
1460 X 970, 93KB
Up Folder
Navigation
Option
No Marked
Free Space 150MB
Up Folder
KR103
KR101
KR104
KR102
KR105
JMJ001
JMJ005
JMJ002
JMJ006
JMJ003
JMJ007
JMJ004
JMJ008
P
Page Change
MARK
Mark
RETURN
Exit
Photo List
Page 1/2
photo
1460x970
No Marked
Free Space 150MB
Up Folder
KR103
KR101
KR102
JMJ001
JMJ002
1460 X 970, 93KB
Up Folder
Navigation
1
View : Display the selected item.
Option
JMJ003
KR104
1460 x 970, 93KB
KR105
View
JMJ005
Mark All
JMJ006
Delete
JMJ007
Close
JMJ004
P
Page Change
Mark All : Mark all photos on the screen.
G Unmark All : Deselect all marked photos.
G D e l e t e : Delete the selected photo item.
G C l o s e : Close the pop-up menu.
G
JMJ008
MARK
Mark
RETURN
Exit
TO USE A USB DEVICE
G
USB Device
Select the target folder or drive.
• Use the P
2
3
4
Select the desired photos.
OK
OK
Show the PopUp menu.
OK
button to navigation in the
photo page.
• Use the M A R K button to mark or unmark a
photo. When one or more photos are marked,
you can view individual photos or a slide show
of the marked photos. If no photos are marked,
you can view all photos individually or all photos in the folder in a slide show.
Select the desired PopUp menu.
• Press the R E T U R N button to return to normal TV viewing.
57
TO USE A USB DEVICE
Set up the menu in Full-Sized Screen
You can change the settings to display photos stored on a USB device, on a full-sized screen.
Detailed operations are available on full-sized photo view screen.
USB Device
Photo List
Page 1/2
photo
1460x970
1460 X 970, 93KB
Up Folder
TO USE A USB DEVICE
Navigation
Option
No Marked
Free Space 150MB
Up Folder
KR103
KR101
KR104
KR102
KR105
JMJ001
JMJ005
JMJ002
JMJ006
JMJ003
JMJ007
JMJ004
JMJ008
P
Page Change
MARK
Page 1/2
photo
1460x970
No Marked
Exit
Free Space 150MB
Up Folder
KR103
KR101
KR102
JMJ001
JMJ002
1460 X 970, 93KB
JMJ003
KR104
1366x768, 125KB
KR105
View
JMJ005
Mark All
JMJ006
Delete
Option
P
Page Change
1/17
JMJ007
Close
JMJ004
Up Folder
1
RETURN
USB Device
Photo List
Navigation
Mark
Slideshow
MARK
Mark
Select the target folder or drive.
3
OK
OK
4
5
58
Select the desired photos.
Show the PopUp menu.
Select V i e w.
OK
Delete
Option
Hide
JMJ008
RETURN
Exit
The aspect ratio of a photo may change the
size of the photo displayed on the screen in
full size.
Press the R E T U R N button to move to the previous menu screen.
• Use the P
photo page.
2
BGM
The selected photo is displayed in
full size.
button to navigation in the
6
OK
Select the Slideshow , B G M,
D e l e t e , Option or H i d e.
• Use
(Rotate),
button to select the previous or
next photo.
1/17
Slideshow
BGM
Delete
Option
• Use
button to select and control the
menu on the full-sized screen.
Hide
S l i d e s h o w : When no picture is selected, all photos in the current
folder are displayed during slide show. If some photos are selected,
those photos are displayed in a slide show.
■ Set the time interval of the slide show in O p t i o n.
G
B G M : Listen to music while viewing photos in full size.
■ Set the BGM device and album in O p t i o n .
G
( R o t a t e ) : Rotate photos.
■ Rotates the photo 90°, 180°, 270°, 360° clockwise.
G
D e l e t e : Delete photos.
G
O p t i o n : Set values for S l i d e S p e e d and M u s i c F o l d e r.
■ Use
button and O K button to set values. Then go to
OK
and press O K to save the settings.
■ You cannot change M u s i c F o l d e r while BGM is playing.
TO USE A USB DEVICE
G
Press F G to set the time interval
between slides.
Slide Speed
Fast
Music Folder
Music
OK
G
Cancel
H i d e : Hide the menu on the full-sized screen.
■ To see the menu again on the full-sized screen, press O K button
to display.
• Press the R E T U R N button to move to the previous menu screen.
59
TO USE A USB DEVICE
MUSIC LIST
Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by this model.
Music file on your USB device can be played by this unit.
The On Screen Display may be different from your TV. Images are an example to assist with the TV operation.
MUSIC (*.MP3) supporting file
Bit rate 32 ~ 320kbps
• Sampling rate MPEG1 layer 3: 32 kHz, 44.1 kHz, 48 kHz.
TO USE A USB DEVICE
Screen Components
1 MENU
2
OK
Select U S B.
Select Music List.
OK
2
1
Moves to upper level folder
2
Current page/Total pages
3
Total number of marked music
title
4
Usable USB memory
5
Corresponding buttons on
the remote control
4
USB Device
Music List
Page 2/3
No Marked
music
Free Space 150MB
Title
Duration
Up Folder
■ 00:00 / 01:34
1
Up Folder
Navigation
Option
5
60
3
P
Page Change
MARK
Mark
RETURN
Exit
Music Selection and PopUp Menu
As shown , up to 6 music titles are listed per page.
USB Device
Music List
No Marked
Page 2/3
Free Space 150MB
Duration
Title
music
Up Folder
■ 00:00 / 01:34
Navigation
Option
P
Page Change
MARK
Mark
RETURN
Exit
No Marked
Page 2/3
Free Space 150MB
Duration
Title
music
Up Folder
4395KB
1Kbps
Play
Play with Photo
Mark All
■ 00:00 / 01:34
Delete
Close
Up Folder
Navigation
1
2
3
4
Option
P
Page Change
MARK
Mark
RETURN
Exit
Select the target folder or drive.
Select the desired music title
OK
OK
Show the PopUp menu.
OK
TO USE A USB DEVICE
USB Device
Music List
P l a y (During stop) : Play the selected music titles.
Once a music finishes playing, the next selected one
will be played. When there are no selected music
titles to play, the next one in the current folder will
be played. If you go to a different folder and press
the O K button, the current music in playback will
stop.
G P l a y M a r k e d : Play the selected music titles. Once
a music finishes playing, the next selected one will
be played automatically.
G S t o p P l a y (During playback) : Stop the playing
music titles.
G P l a y w i t h P h o t o : Start playing the selected
music titles and then move to the Photo List.
G M a r k A l l : Mark all music titles in the folder.
G U n m a r k A l l : Deselect all marked music titles.
G D e l e t e : Delete the selected music titles.
G C l o s e : Close the pop-up menu.
G
Up Folder
• Use the P
button to navigation in the
music page.
• Use M A R K button to mark or unmark a music.
When one or more music files are marked, the
marked music title will be played in sequence.
For example, if you want to listen to only one
music repeatedly, just mark the music only and
play it. If no music is marked, all the music in
the folder will be played in sequence.
Select the desired PopUp menu.
• Press the R E T U R N button to return to normal TV viewing.
61
TO USE A USB DEVICE
TO USE A USB DEVICE
62
■
If you don't press any button for a while during the playing, the play information box (as shown in the below) will
float as a screen saver.
■
The ‘Screen Saver’?
Screen saver is to prevent screen pixel damage due to an
fixed image remaining on the screen for a extended period
of time.
! NOTE
When a music file is played,
is displayed behind the title.
G A damaged or corrupted music does not play but displays 00:00 in playtime.
G A music downloaded from a paid service with copyright protection does not start but displays inappropriate information in playtime.
G If you press O K, A buttons, screen saver is stopped.
G The P L A Y ( G) , P a u s e ( I I ) , A, GG, FF buttons on the remote control are also available in this mode.
G You can use the GG button to select the next music and the FF button to select the previous music.
G
MOVIE LIST (Except for 42/50PQ2***)
The movie list is activated once USB is detected. It is used when playing movie files on TV.
Displays the movies in the USB folder and supports Play.
Allows playback of all movies in the folder and user desired files.
Video editing is not supported but files can be deleted.
It is a movie list that displays folder information and Divx file.
Supports up to four drives.
Extension name
Video Codec
Audio Codec
mpg, mpeg, vob, dat
MPEG1, MPEG2
AC3,MPEG,MP3,PCM
Avi, divx, m4v
MPEG4-SP, MPEG4-ASP, Divx 3.xx, Dvix 4.xx, Dvix 5.xx
AC3,MPEG,MP3,PCM
TO USE A USB DEVICE
MOVIE(*.avi/*.Divx) supporting file
Video format : MPEG1, MPEG2, MPEG4(Doesn’t support Microsoft MPEG 4-V2, V3), DivX 3.xx, DivX
4.xx, DivX 5.xx, DivX VOD(DRM), XviD, DivX 6.xx(Playback)
Audio format : Mpeg, Mp3, PCM, Dolby Digital
Sampling frequency : within 32k~48 khz
Bit rate : 32k~320 kbps
Subtitle format : *.smi/ *.srt/ *.sub(MicroDVD, SubViewer 2.0)/ *.ass/ *.ssa/*.txt(DVD Subtitle System)
• DivX may not be played depending on its types or recording methods.
• If the video and audio structure of recorded file is not interleaved, either video or audio is outputted.
• Maximum FPS (Frame Per Second) can be reached only at SD level. FPS is 25 FPS (720*576) or 30
FPS (720*480) depending on Resolution.
• Max bitrate of playable DivX is 4Mbps.
• Files more than 25 FPS or 30 FPS or higher may not be played properly.
• A DivX movie file and its subtitle file must be located in the same folder.
• A video file name and its subtitle file name must be identical for it to be displayed.
• Playing a video via a USB connection that doesn’t support high speed may not work properly.
• USB storage devices below USB 2.0 are supported as well. But they may not work properly in the
movie list.
• Files encoded with GMC(Global Motion Compensation) may not be played.
• When you’re watching the movie by using M o v i e L i s t and P h o t o L i s t function, an image mode
setup doesn’t operate.
Resolution
720x576@25p
720x480@30p
Dvix 6.xx(Playback), Xvid
63
TO USE A USB DEVICE
Screen Components
1 MENU
2
OK
Select U S B.
OK
2
1
Moves to upper level folder
2
Current page/Total pages
3
TO USE A USB DEVICE
Total number of marked movie
title
4
Usable USB memory
5
Corresponding buttons on
the remote control
Select Movie List
3
4
USB Device
Movie List
Page 2/3
No Marked
movie
Free Space 1.8GB
Title
Duration
Up Folder
The Aviator_(2004)_5CH_AV3_1CD
The Aviator_(2004)_5CH_AV3_2CD
704 x 400, 34MB
1
Up Folder
Navigation
Option
Scent of a woman.(1992).Dvdrip
01:34:45
The Incredibles [REPACK_AC3_5.0c-CiM
01:15:30
The Incredibles [REPACK_AC3_5.0c-CiM
01:30:20
Page Change
MARK
Mark
RETURN
Exit
5
! NOTE
G
64
Use the left/right ( / ) keys to move to a specific frame forward or backward while playing a movie.
(The left/right ( / ) keys may not work properly for some files while playing a movie.)
Movie Selection and PopUp Menu
As shown , up to 6 movie titles are listed per page.
USB Device
Movie List
Page 2/3
No Marked
movie
Free Space 1.8GB
Duration
Title
Up Folder
The Aviator_(2004)_5CH_AV3_1CD
The Aviator_(2004)_5CH_AV3_2CD
Scent of a woman.(1992).Dvdrip
704 x 400, 34MB
Navigation
01:15:30
The Incredibles [REPACK_AC3_5.0c-CiM
01:30:20
Option
Page Change
MARK
Mark
RETURN
Exit
P r e v i e w: Displays the preview video of the
current file.
G P l a y : Play the selected movie titles. Divx Play
is executed while screen changes.
G M a r k A l l : Mark all movie titles in the folder.
G U n m a r k A l l : Deselect all marked movie titles.
G P l a y M a r k e d : Play the selected movie titles.
Once a movie finishes playing, the next selected one will be played automatically.
G D e l e t e : Delete the selected movie titles.
G C l o s e : Close the pop-up menu.
G
USB Device
Movie List
Page 2/3
No Marked
movie
Free Space 1.8GB
Duration
Title
Up Folder
The Aviator_(2004)_5CH_AV3_1CD
704x400, 34MB
704 x 400, 34MB
Up Folder
Navigation
1
2
The Aviator_(2004)_5CH_AV3_2CD
Play
Scent of a woman.(1992).Dvdrip
01:34:45
Mark All
The Incredibles [REPACK_AC3_5.0c-CiM
Delete 01:15:30
Close 01:30:20
The Incredibles [REPACK_AC3_5.0c-CiM
Option
Page Change
MARK
Mark
RETURN
Exit
TO USE A USB DEVICE
Up Folder
01:34:45
The Incredibles [REPACK_AC3_5.0c-CiM
Select the target folder or drive.
Select the desired movie titles.
OK
3
OK
Show the PopUp menu.
4
OK
Select the desired PopUp menu.
• Press the R E T U R N button to return to normal TV viewing.
! NOTE
G
In the case of files not supported, a message regarding non-supported file is displayed.
65
TO USE A USB DEVICE
Using the Movie List function, play
Picture Size
F
Full Screen
Subtitle Language
---
Audio Language
1/1
Subtitle File
---
. Language
Latin 1
. Sync
0
. Position
0
• Option
G
OK
1
• When DivX is playing, if you press the
Select the desired option.
TO USE A USB DEVICE
R E D button, this message is displayed.
2
Select P i c t u r e S i z e , S u b t i t l e L a n g u a g e ,
Audio Language, Subtitle File,
L a n g u a g e , S y n c or P o s i t i o n .
OK
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
Using the remote control
When playing,
FF
/ GG
repeatedly, press the R E W( FF) button to speed up FF -> FFF -> FFFF ->
FFFFF ->FFFFFF .
repeatedly, press the F F( GG) button to speed up GG-> GGG -> GGGG -> GGGGG
-> GGGGGG.
■
II
During playback, press the P a u s e( I I ) button.
■ Still screen is displayed.
■
P L A Y ( G)
66
Pressing these buttons repeatedly increases the fast forward/reverse speed.
When using the
or
button during playback a cursor indicating the position
can be viewed on the screen.
Press the P L A Y( G) button to return to normal playback.
DIVX REGISTRATION CODE (Except for 42/50PQ2***)
Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or
purchased at www.divx.com/vod.
With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed. (Only DivX
files matched with the registration code of the purchased TV are playable.)
USB
Move
USB
OK
Photo List
Photo List
Music List
Music List
Movie List
Movie List
DivX
DivX Reg.
Reg. Code
Code
DivX Reg. Code
Deactivation
Deactivation
Move
i
OK
Div X(R) Video On Demand
Your registration code is : xxx xxxxxxx
To learn more visit www.divx.com/vod
Close
TO USE A USB DEVICE
1 MENU
Select U S B.
2
OK
Select Divx Reg. Code.
3
• Press the M E N U button to return to normal TV viewing.
Display D i v x R e g . C o d e.
• Press the R E T U R N button to move to the previous menu screen.
“DivX Certified to play DivX video, including premium content”
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is
an official DivX Certified device that plays DivX video. Visit www.divx.com for
more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX certified® device must be registered in order to play DivX Video-on-Demand(VOD) content. To generate the
registration code, locate the DivX VOD section in the device setup menu. Go to
vod.divx.com with this code to complete the regitsration process and learn more
about DivX VOD.
! NOTE
Supported movie file
Resolution : under 25 frames/sec(720x576 WxH pixels).
Frame rate : under 30 frames/sec(720x480)
Video Codec : MPEG1, MPEG2, MPEG4(Doesn’t support Microsoft MPEG4-V2, V3), DivX3.xx, DivX4.xx, DivX5.xx, DivX
VOD(DRM), XviD, DivX6.xx(Playback).
GWhen loading, some buttons may not work.
G
67
TO USE A USB DEVICE
DEACTIVATION (Except for 42/50PQ2***)
Delete the existing authentication information to receive a new DivX user authentication for TV.
Once this function is executed, a DivX user authentication is required again to see DivX DRM files.
USB
Move
OK
USB
Move
Photo List
Music List
Music List
Movie List
Movie List
DivX Reg. Code
Deactivation
Deactivation
DivX Reg. Code DivX(R) Video On Demand
Deactivation
Deactivation
Do you want to deactivate your device?
TO USE A USB DEVICE
Yes
1 MENU
OK
Photo List
No
Select U S B.
2
OK
Select Deactivation.
3
OK
OK
Select Y e s or N o.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
68
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing
options.
The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of
these programme details will vary, depending on the particular broadcaster).
This function can be used only when the EPG information is broadcast by broadcasting companies
The EPG displays the programme details for next 7 days.
Switch on/off EPG
1 ABC TV Sydney
22/ Dec 2006 00:00
22/Dec. (Fri.)
11:00
10:00
E
d
1 ABCTVSy...
d
7 7 Digital
d
d
d
d
The...
Bob the builder spe... ...
I Dream - Li...
No Information
9 NineDigital
No Information
10 ABC2
Telet... ... Boohbah...
Fra... ... ...
11 ABC TV
No Information
12 ABCHDTV ... Bob the builder ... ... ...
Out There
G
G
...
G
E
TV/RAD RADIO
Mode
Select a programme
1
or
2
OK
P
Select desired programme.
Display the selected programme.
FAV Favourite
Date
INFO i Information
Remind Programme
Pr. Change
Schedule List
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
Switch on or off EPG.
ALL
E
1GUIDE
Programme Guide
69
EPG (ELECTRONIC PROGRAMME GUIDE)
Button Function in NOW/NEXT Guide Mode
You can view a program being broadcasted and one scheduled to follow.
Programme Guide
RED Change EPG mode.
1 ABC TV Sydney
YELLO
YELLOW Enter Timer Remind setting mode.
BLUE Enter Schedule list mode.
22/ Dec. 2006 10:05
E
ALL
NOW
NEXT
d
1 ABCTVSy...
The Wiggles show
Bob The Builder Special
d
7 7 Digital
d
9 NineDigital
No Information
No Information
d
d
10 ABC2
11 ABC TV
No Information
No Information
Franny’s Feet: Wond...
d
12 ABC HD
The Wiggles show
The Wiggles show
This is Daniel Cook
Bob The Builder Special
Bob The Builder Special
E
TV/RAD RADIO
FAV Favourite
INFO i Information
Mode
OK
Pr. Change
Schedule List
Remind Programme
Change to the selected programme.
Select NOW or NEXT Programme.
GUIDE
Switch off EPG.
or
Select the Broadcast Programme.
Page Up/Down.
Detail information on or off.
Button Function in 7 Day Guide Mode
RED Change EPG mode.
Programme Guide
1 ABC TV Sydney
ALL
22/ Dec 2006 10:05
E
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
P
22/Dec. (Fri.)
11:00
10:00
E
GREEN Enter Date setting mode.
d
1 ABCTVSy...
d
7 7 Digital
d
d
YELLO
YELLOW Enter Timer Remind setting mode.
d
d
The...
Bob the builder spe... ...
I Dream - Li...
No Information
9 NineDigital
No Information
10 ABC2
Telet... ... Boohbah...
Fra... ... ...
11 ABC TV
No Information
12 ABCHDTV ... Bob the builder ... ... ...
Out There
G
G
...
G
E
TV/RAD RADIO
Mode
FAV Favourite
Date
INFO i Information
Remind Programme
BLUE Enter Schedule list mode.
OK
Change to the selected programme.
Select NOW or NEXT Programme.
Select the Broadcast Programme.
P
70
Select TV or RADIO Programme.
TV/RAD
Page Up/Down.
GUIDE
TV/RAD
or
Switch off EPG.
Select TV or RADIO Programme.
Detail information on or off
Pr. Change
Schedule List
Button Function in Date Change Mode
Programme Guide
1 ABC TV Sydney
ALL
22/ Dec 2006 10:05
E
GREEN Switch off Date setting mode.
22/Dec. (Fri.)
11:00
10:00
E
OK
Change to the selected date.
d
1 ABCTVSy...
d
7 7 Digital
d
d
Select a date.
d
d
The...
Bob the builder spe... ...
I Drean - Li...
No Information
9 NineDigital
No Information
10 ABC2
Telet... ... Boohbah...
Fra... ... ...
11 ABC TV
No Information
12 ABCHDTV ... Bob the builder ... ... ...
Out There
G
G
...
G
E
Date. Change
Date Exit
Switch off Date setting mode.
GUIDE
or
Switch off EPG.
Text Up/Down.
YELLO
YELLOW Enter Timer Remind setting mode.
Information
22/ Dec. 2006 10:05
22/ Dec. 2006
The detail information on or off.
GUIDE
or
Switch off EPG.
INFO i Info. Exit
Remind Programme
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
Button Function in Extended Description Box
71
EPG (ELECTRONIC PROGRAMME GUIDE)
Button Function in Remind Setting Mode
YELLO
YELLOW Change to Guide or Schedule list mode.
22/ Dec. 2006 10:06
Programme
Save Timer Remind.
Date
Start Time
E
OK
Remind Programme
10 ABC2
22
Dec.
10 : 47
E
Save
Cancel
Select Programme, Date or Start time.
Function setting.
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
72
Button Function in Schedule List Mode
If you’ve created a schedule list, a scheduled program is displayed at the scheduled time even when you are
watching a different program at the time.
YELLO
YELLOW Add new Manual Timer setting mode.
Schedule List
22/Dec. 2006 10:06
Title
Time
GREEN Enter S c h e d u l e L i s t editing mode.
Date
22 Dec.
Programme
RED Delete the selected item.
Delete
BLUE Change to Guide mode.
Select S c h e d u l e L i s t.
Edit
New
Guide
PICTURE CONTROL
PICTURE SIZE (ASPECT RATIO) CONTROL
You can watch the screen in various picture formats; 16:9, Just Scan,
Original, 4:3, 14:9, Zoom and Cinema Zoom.
If a fixed image is displayed on the screen for a long time, that fixed image
may become imprinted on the screen and remain visible.
You can adjust the enlarge proportion using
button.
This function works in the following signal.
1Q. MENU
Select A s p e c t R a t i o.
• You can also adjust Aspect Ratio in the P I C-
T U R E menu.
• For Zoom Setting, select 1 4 : 9, Zoom and
2
OK
Select the desired picture format.
• Original
When your TV receives a wide screen signal it will automatically change to the picture format broadcast.
PICTURE CONTROL
• 16:9
The following selection will allow you to adjust the picture horizontally, in linear proportion, to fill the entire
screen(useful for viewing 4:3 formatted DVDs)
Cinema Zoom in Ratio Menu. After completing
Zoom Setting, the display goes back to Q.Menu.
Original
• Just Scan
Following Selection will lead to you view the
picture of best quality without loss of original
picture in high resolution image.
Note : If there is noise in original Picture,
You can see the noise at the edge.
• 4:3
The following selection will allow you to view a picture
with an original 4:3 aspect ration, gray bars will appear
on both the left and right of the screen.
Just Scan
73
PICTURE CONTROL
• 14:9
You can view a picture format of 14:9 or a general TV
programme in the 14:9 mode. The 14:9 screen is
viewed in the same way as in 4:3, but is magnified to
the left and right.
• Cinema Zoom
Choose Cinema Zoom when you wish the picture to be altered, both horizontally extended
and vertically cropped. The picture adopting a
compromise between alteration and screen
coverage.
The adjustment range is 1-16.
• Zoom
The following selection will allow you to view
the picture without any alteration, while filling
the entire screen. However, the top and bottom of the picture will be cropped.
PICTURE CONTROL
! NOTE
G
G
G
74
You can only select 4 : 3, 1 6 : 9 (Wide), 1 4 : 9, Z o o m , C i n e m a Z o o m in Component (under
720p) mode.
You can only select 4 : 3, 1 6 : 9 (Wide) in RGB/HDMI[PC] mode only.
In HDMI/Component (over 720p) or DTV (over 576p) mode, J u s t S c a n is available.
ENERGY SAVING
It reduces the plasma display’s power consumption.
The default factory setting complies with the Energy Star requirements and is adjusted to the comfortable level
to be viewed at home.
You can increase the brightness of your screen by adjusting the Energy Saving level or by setting the Picture
Mode.
PICTURE
Aspect Ratio
Move
PICTURE
OK
: 16:9
Aspect Ratio
EnergySaving
Saving: :Intelligent
IntelligentSensor
Sensor
Energy
Picture Mode
Picture Mode
90
• Contrast
90Minimum
• Brightness
50
• Brightness
50Medium
• Sharpness
70
• Sharpness
70Maximum
• Colour
60
• Colour
60
0
R
G
• Tint
3
OK
F
Low
G
Off
0
R
G
E
Select P I C T U R E.
Select
• When the Intelligent sensor function is on, the
most suitable picture is automatically adjusted
according to the surrounding conditions.
• I n t e l l i g e n t S e n s o r : Adjusts picture according to the surrounding conditions.
E n e r g y S a v i n g.
PICTURE CONTROL
OK
: Standard
• Contrast
E
2
OK
Energy
Intelligent Sensor
EnergySaving
Saving: :Intelligent
IntelligentSensor
Sensor
: Standard
• Tint
1 MENU
Move
: 16:9
Select I n t e l l i g e n t S e n s o r, O f f ,
Minimum, Medium or
Maximum.
When the I n t e l l i g e n t S e n s o r is selected,
4
OK
Select L o w , M i d d l e or H i g h.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
75
PICTURE CONTROL
PRESET PICTURE SETTINGS
Picture Mode-Preset
■
Image shown may differ from your TV.
Vivid
Standard
Cinema
Sport
Game
Enhances contrast, colour and resolution.
Displays the standard-quality screen.
Optimizes video for watching movies.
Optimizes video for watching sports events.
Optimizes video for playing games.
PICTURE
Aspect Ratio
Move
PICTURE
OK
: 16:9
Aspect Ratio
Energy Saving : Intelligent Sensor
Picture Mode
Mode : Standard
Picture
: Standard
Standard
Standard
• Contrast
90
• Contrast
90Cinema
• Brightness
50
• Brightness
50Sport
• Sharpness
70
• Sharpness
70Game
• Colour
60
• Colour
60Expert1
• Tint
0
R
OK
Energy Saving : Intelligent Sensor
Vivid
Picture Mode
Mode : Standard
Picture
: Standard
• Tint
G
PICTURE CONTROL
E
1 MENU
Move
: 16:9
0Expert2
E
Select P I C T U R E.
• Picture Mode adjusts the TV for the best pic-
2
OK
3
OK
Select P i c t u r e M o d e.
Select V i v i d, S t a n d a r d, C i n e m a,
S p o r t or G a m e .
ture appearance. Select the preset value in the
Picture Mode menu based on the programme
category.
• You can also adjust P i c t u r e M o d e in the Q .
M e n u.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
76
MANUAL PICTURE ADJUSTMENT
Picture Mode-User option
• Contrast
Adjusts the difference between light and dark levels in the picture.
• Brightness
Increases or decreases the amount of white in the picture.
• Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
• Colour
Adjusts intensity of all colours.
• Tint
Adjusts the balance between red and green levels.
PICTURE
Aspect Ratio
Move
PICTURE
OK
: 16:9
Aspect Ratio
Energy Saving : Intelligent Sensor
Move
Energy Saving : Intelligent Sensor
Vivid
Picture Mode
Mode : Standard
Picture
: Standard
Picture
: Standard
Picture Mode
Mode : Standard
90
• Contrast
90
• Brightness
50
• Brightness
50
• Sharpness
70
• Sharpness
70
• Colour
60
• Colour
60
0
R
• Tint
G
E
E
0
Standard
Standard
Cinema
Sport
Game
Expert1
Expert2
1 MENU
Select P I C T U R E.
2
Select P i c t u r e M o d e.
OK
PICTURE CONTROL
• Contrast
• Tint
OK
: 16:9
3
OK
Select V i v i d, S t a n d a r d, C i n e m a, S p o r t or G a m e .
OK
Select C o n t r a s t, B r i g h t n e s s, S h a r p n e s s, C o l o u r or T i n t.
OK
Make appropriate adjustments.
4
5
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
! NOTE
G
G
You cannot adjust colour, sharpness and tint in the RGB/HDMI[PC] mode.
When the E x p e r t 1 / 2 is selected, you can select C o n t r a s t, B r i g h t n e s s, H S h a r p n e s s,
V S h a r p n e s s, C o l o u r or T i n t .
77
PICTURE CONTROL
PICTURE IMPROVEMENT TECHNOLOGY
You can calibrate the screen for each Picture Mode or set the video value according to the special
video screen.
You can set the video value differently for each input.
To reset to the factory default screen after making adjustment to each video mode, execute the
“Picture Reset” function for each Picture Mode.
PICTURE
Move
PICTURE
OK
Move
OK
E
E
• Contrast
90
• Contrast Colour
90Temperature
• Brightness
50
• BrightnessDynamic
50 Contrast
• Sharpness
70
• SharpnessDynamic
70 Colour
• Colour
60
• Colour
• Tint
0
R
G
• Advanced Control
PICTURE CONTROL
• Picture Reset
screen
screen
F
Medium
G
High
High
60
Noise Reduction
• Tint
0
Gamma
• Advanced Control
Black Level
• Picture Reset
Film Mode
Medium
Medium
Auto
Off
Colour Gamut
Standard
Edge Enhancer
Off
Close
1 MENU
Select P I C T U R E.
2
OK
Select A d v a n c e d C o n t r o l.
OK
Select your desired Source. : C o l o u r T e m p e r a t u r e , D y n a m i c C o n t r a s t ,
Dynamic Colour, Noise Reduction, Gamma, Black Level, Film Mode,
C o l o u r G a m u t or E d g e E n h a n c e r.
3
4
Make appropriate adjustments.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
78
■
Choose one of three automatic colour adjustments. Set to warm to
enhance hotter colours such as red, or set to cool to see less
intense colours with more blue.
■
Adjusts the contrast to keep it at the best level according to the brightness
of the screen. The resolution of gradation is improved by making bright
parts brighter and dark parts darker. This feature refers to dynamic contrast,
and enhances the feeling of presence that contrast controls are intended to
give by using dimming and other input signals.
Dynamic Colour
(Off/Low/High)
■
Adjusts screen colours so that they look livelier, richer and clearer. This
feature enhances hue, saturation and luminance so that red, blue, green
and white look more vivid.
Noise Reduction
(Off/Low/Medium/High)
■
Reduces screen noise without compromising video quality. This feature
is also used to reduce recursive noise and MPEG noise
(Mosquito/Block).
■
You can adjust brightness of dark area and middle gray level area of the
picture.
• Low : Make dark and middle gray level area of the picture brighten.
• Medium: Express original picture gradation.
• High: Make dark and middle gray level area of the picture darken.
Colour Temperature
(Cool/Medium/Warm)
Dynamic Contrast
(Off/Low/High)
Gamma
(Low/Medium/High)
Black Level
(Low/High)
Film Mode
(On/Off)
• High: The reflection of the screen gets brighter.
• Auto : Realizing the black level of the screen and set it to High or Low
automatically.
■ Makes dark parts on the screen look darker.
Set black level of the screen to proper level.
This function works in the following mode: AV (NTSC-M), HDMI or
Component .
This function enables to select “Low” or “High” in the following
mode : AV(NTSC-M), HDMI or Component. Otherwise, “Black level”
is set to “Auto”.
■
PICTURE CONTROL
• Low :The reflection of the screen gets darker.
Makes video clips recorded in film look more natural.
This feature operates only in TV, AV and Component
480i/576i/1080i mode.
■ Change
the colour gamut of the output image.
• Wide: Express rich colour tones using the maximum colour gamut available
in the TV regardless of the input image.
Colour Gamut
(Wide/Standard)
Edge Enhancer
(Off/On)
• Standard: Express accurate colour tones by changing the colour gamut to
meet international standards based on the input image data
(resolution/format).
■
Show clearer and distinctive yet natural corners of the video.
Emphasizes the frames of the video without over peaking.
79
PICTURE CONTROL
Expert Picture Control
By segmenting categories, E x p e r t 1 and E x p e r t 2 provide more categories which users can set as they see fit,
offering the optimal picture quality for users.
As the detail item for video quality experts to fine tune the video using specific videos, this may not be
effective for general videos.
PICTURE
Move
PICTURE
OK
Move
OK
E
Dynamic Contrast
• Brightness
50
Noise Reduction
• H sharpness 50
Aspect Ratio : 16:9
F
Medium
Black70
Level
Auto
• Tint
0
Film Mode
• Advanced
Control
Expert Control
Colour Standard
G
Off
SD
• Picture Reset
Colour Gamut
screen
G
Off
Gamma
• V sharpness
70
• Colour
Off
Standard
Edge Enhancer
Off
D
PICTURE CONTROL
Energy Saving : Intelligent Sensor
Vivid
Picture Mode
Mode :: Expert1
Expert1
Picture
Standard
• Contrast
80
Cinema
• Brightness
50
Sport
• H sharpness 50
Game
• V sharpness 50
Expert1
Expert1
• Colour
50 R
Expert2
E
Close
1 MENU
Select P I C T U R E.
2
OK
Select P i c t u r e M o d e.
3
OK
Select E x p e r t 1 or E x p e r t 2.
OK
Select E x p e r t C o n t r o l.
OK
Select your desired Source.
4
5
6
Make appropriate adjustments.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
80
■
Adjusts the contrast to keep it at the best level according to the brightness
of the screen. The resolution of gradation is improved by making bright
parts brighter and dark parts darker. This feature refers to dynamic contrast,
and enhances the feeling of presence that contrast controls are intended to
give by using dimming and other input signals.
■
Reduces screen noise without compromising video quality. This feature
is also used to reduce recursive noise and MPEG noise
(Mosquito/Block).
■
You can adjust brightness of dark area and middle gray level area of the
picture.
• Low : Make dark and middle gray level area of the picture brighten.
• Medium: Express original picture gradation.
• High: Make dark and middle gray level area of the picture darken.
Dynamic Contrast
(Off/Low/High)
Noise Reduction
(Off/Low/Medium/High)
Gamma
(Low/Medium/High)
• Low :The picture of the screen gets darker.
Black Level
(Low/High)
■
Makes video clips recorded in film look more natural.
This feature operates only in TV, AV and Component
480i/576i/1080i mode.
Select the international standard for the colour gamut that will be
applied when the colour gamut is set to Standard.
• SD: Increase colour accuracy by adjusting the output image to meet
the EBU (European Broadcasting Union) Colour Coordinate
Standard.
• HD: Increase colour accuracy by adjusting the output image to meet
ITU.BT-709 (High Definition Signal International Colour Coordinate
Standard).
■
Colour Standard
(SD/HD)
Colour Gamut
(Wide/Standard)
■ Change
PICTURE CONTROL
Film Mode
(On/Off)
• High: The picture of the screen gets brighter.
• Auto : Realizing the black level of the screen and set it to High or Low
automatically.
■ Makes dark parts on the screen look darker.
Set black level of the screen to proper level.
This function works in the following mode: AV (NTSC-M), HDMI or
Component .
This function enables to select “Low” or “High” in the following
mode : AV(NTSC-M), HDMI or Component. Otherwise, “Black level”
is set to “Auto”.
the colour gamut of the output image.
• Wide: Express rich colour tones using the maximum colour gamut available
in the TV regardless of the input image.
• Standard: Express accurate colour tones by changing the colour gamut to
meet international standards based on the input image data
(resolution/format).
Edge Enhancer
(Off/On)
■
Show clearer and distinctive yet natural corners of the video.
Emphasizes the frames of the video without over peaking.
81
PICTURE CONTROL
White Balance (Medium/Warm/Cool)
• Adjust white balance.
■
Pattern (Inner/Outer)
• Decide whether to use the Inner Pattern or External Pattern when adjusting white
balance.
■
White Balance
(Medium/Warm/Cool)
Red Gain/Green Gain/Blue Gain
• Adjust high-level white balance.
■
Red Offset/Green Offset/Blue Offset
• Adjust low-level white balance.
■
Colour (Red/Green/Blue/Yellow/Cyan/Magenta)
• Adjust colour saturation by area.
■ Tint (Red/Green/Blue/Yellow/Cyan/Magenta)
• Adjust colour tint by area.
■
Colour Management
System
PICTURE CONTROL
82
PICTURE RESET
Settings of the selected picture modes return to the default factory settings.
PICTURE
Move
PICTURE
OK
OK
E
E
• Contrast
90
• Contrast
90
• Brightness
50
• Brightness
50
• Sharpness
70
• Sharpness
70
• Colour
60
• Tint
0
i
R
G
R
0
G
• Picture Reset
Screen
Select P I C T U R E.
PICTURE CONTROL
• Advanced Control
• Picture Reset
Screen
• Colour
60
Resetting
video configuration...
• Tint
• Advanced Control
1 MENU
Move
2
OK
Select P i c t u r e R e s e t.
3
OK
Initialize the adjusted value.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
83
PICTURE CONTROL
IMAGE STICKING MINIMIZATION (ISM) METHOD
A frozen or still picture displayed on the screen for prolonged periods will result in a ghost image remaining even
when you change the image. Avoid allowing a fixed image to remain on the screen for prolonged periods.
Normal
If image sticking is never a problem, ISM is not necessary - set to Normal.
Orbiter
Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the
screen. To avoid a permanent image on the screen, the screen will move every 2 minutes.
Colour Wash
The colour block with the screen moved a little and the white pattern are alternately displayed. It is difficult to sense the afterimage occurred while the temporary afterimage is removed and the colour pattern is
operating.
White Wash
White wash removes permanent images from the screen.
Note: An excessive permanent image may be impossible to clear entirely with White Wash.
OPTION
Move
Subtitle
OPTION
OK
: Off
Move
Subtitle
PICTURE CONTROL
Input Label
OK
: Off
Input Label
SIMPLINK
: On
SIMPLINK
Key Lock
: Off
Key Lock
: Off
Set ID
: Off
Set ID
: Off
ISM
ISM Method
Method
: Normal
ISM Method
Method
ISM
Demo Mode
: Off
Demo Mode
: Home Use
Mode Setting
Mode Setting
E
: On
: Normal
Normal
: Off
E
: HomeOrbiter
Use
Colour Wash
White Wash
1 MENU
Select O P T I O N.
• If you do not need this function, set N o r m a l .
2
OK
Select I S M M e t h o d.
3
Select N o r m a l , O r b i t e r , C o l o u r W a s h
or W h i t e W a s h .
OK
4
OK
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
84
DEMO MODE
Use it to see the difference between XD Demo on and XD Demo off.
The screen is reset automatically after 5 minutes in D e m o M o d e.
Note: When you set up te TIme control, XD Demo menu is not available.
It’s not available to use this function in RGB mode.
OPTION
Move
Subtitle
OPTION
OK
: Off
Move
Subtitle
Input Label
OK
: Off
Input Label
SIMPLINK
: On
SIMPLINK
Key Lock
: Off
Key Lock
: Off
Set ID
: Off
Set ID
: Off
ISM Method
: Normal
ISM Method
: Normal
Demo Mode
Mode
Demo
Off
:: Off
Demo Mode
Mode
Demo
Off
:: Off
: Home Use
Mode Setting
Mode Setting
: On
E
E
XD ON
Off
: Home Use
On
XD OFF
PICTURE CONTROL
1 MENU
Select O P T I O N.
2
OK
Select D e m o M o d e.
3
OK
Select O n or O f f.
To stop the D e m o M o d e , press any button.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
85
PICTURE CONTROL
MODE SETTING
We recommend setting the TV to “Home Use” mode for the best picture in your home environment.
“Store Demo” mode is an optimal setting for displaying at stores.
Mode Settiing
OPTION
Move
Subtitle
OK
: Off
Selecting the environment.
Choose the setting mode you want.
Input Label
SIMPLINK
: On
Key Lock
: Off
Set ID
: Off
ISM Method
: Normal
Demo Mode
Mode Setting
Setting
Mode
: Off
::Home
Home Use
Use
Store Demo
Select [Home Use] to use this TV at home. To
use this TV at store, select [Store Demo].
E
PICTURE CONTROL
1 MENU
Home Use
Next
Select O P T I O N.
2
OK
Select M o d e S e t t i n g.
OK
Select S t o r e D e m o or H o m e U s e .
3
4
OK
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
86
SOUND CONTROL
AUTO VOLUME LEVELER
AVL automatically remains on the same level of volume if you change programmes.
Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time
the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments
for each programme.
AUDIO
Move
Auto Volume
Clear Voice I I
Auto Volume
: Off
• Level
Balance
Sound Mode
-
+
0
L
R
: Standard
OK
: Off
• Level
Balance
Sound Mode
OK
Off
On
On
3
-
+
0
L
R
: Standard
• SRS TruSurround XT : Off
• SRS TruSurround XT : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
E
SOUND CONTROL
2
Move
:: On
Off
Clear Voice I I
3
E
1 MENU
AUDIO
OK
Off
:: Off
Select A U D I O.
Select A u t o V o l u m e.
3
OK
Select O n or O f f.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
87
SOUND CONTROL
PRESET SOUND SETTINGS-SOUND MODE
You can select your preferred sound setting; Standard, Music, Cinema, Sport or Game and you can also adjust
Treble, Bass.
Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound
options based on the programme content.
Standard, Music, Cinema, Sport and Game are preset for optimum sound quality at the factory.
Standard
Music
Cinema
Sport
Game
Offers standard-quality sound.
Optimizes sound for listening to music.
Optimizes sound for watching movies.
Optimizes sound for watching sports events.
Optimizes sound for playing games.
AUDIO
Move
Auto Volume
Clear Voice I I
Balance
-
+
0
L
R
: Standard
: Off
• Level
Balance
3
-
0
• SRS TruSurround XT : Off-
• Treble
50
• Treble
50
-
• Bass
50
• Bass
50
-
E
+
Standard
Standard
Sound Mode
Mode :: Standard
Standard
Sound
• SRS TruSurround XT : Off
SOUND CONTROL
Select A U D I O.
OK
: Off
Clear Voice I I
3
E
1 MENU
Move
Auto Volume
: Off
• Level
Sound Mode
AUDIO
OK
: Off
Music
Cinema
Sport
+
+
+
Game
• You can also adjust S o u n d M o d e in the Q .
M e n u.
2
OK
Select S o u n d M o d e.
3
OK
Select S t a n d a r d , M u s i c , C i n e m a , S p o r t or G a m e.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
88
SOUND SETTING ADJUSTMENT -USER MODE
Adjusting the audio Treble and Bass.
AUDIO
Move
Auto Volume
Clear Voice I I
Balance
-
+
0
L
R
: Standard (User)
2
OK
OK
: Off
Clear Voice I I
3
: Off
• Level
Balance
3
-
0
• SRS TruSurround XT :
• Treble
50
• Treble
50
-
• Bass
50
• Bass
50
-
E
+
Standard
Standard (User)
Sound Mode
Mode :: Standard
Standard (User)
Sound
• SRS TruSurround XT : Off
E
1 MENU
Move
Auto Volume
: Off
• Level
Sound Mode
AUDIO
OK
: Off
Off-
Music
Cinema
Sport
+
+
+
Game
Select A U D I O.
Select S o u n d M o d e.
3
Select S t a n d a r d , M u s i c , C i n e m a , S p o r t or G a m e.
OK
Select T r e b l e , B a s s.
SOUND CONTROL
OK
4
5
OK
Set the desired sound level.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
89
SOUND CONTROL
SRS TRUSURROUND XT
Select this option to sound realistic.
1 MENU
2
Select A U D I O.
OK
Select S R S T r u S u r r o u n d X T.
OK
Select O n or O f f.
3
• S R S T r u S u r r o u n d X T : TruSurround XT is a
patented SRS technology that solves the problem
of playing 5.1 multicannel content over two
speakers.
SOUND CONTROL
G
G
is a trademark of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs, Inc.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
90
CLEAR VOICE II
By differentiating the human sound range from others, it helps users listen to human voices better.
AUDIO
Move
Auto Volume
Clear Voice I I
• Level
Balance
Sound Mode
OK
: Off
: Off
3
-
+
0
L
R
: Standard
Move
Auto Volume
: Off
Off
Clear Voice I I
:: Off
On
• Level
Balance
Sound Mode
OK
On
On
3
-
+
0
L
R
: Standard
• SRS TruSurround XT : Off
• SRS TruSurround XT : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
E
1 MENU
AUDIO
E
Select A U D I O.
• Select levels from ‘-6’ to ’6’.
OK
Select C l e a r V o i c e I I.
3
OK
Select O n or O f f.
When the C l e a r V o i c e I I is selected O n,
SOUND CONTROL
2
4
OK
Select the desired L e v e l.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
91
SOUND CONTROL
BALANCE
You can adjust the sound balance of the speakers to preferred levels.
AUDIO
Move
Auto Volume
Clear Voice I I
Balance
-
+
0
L
R
: Standard
: Off
• Level
Balance
Balance
Sound Mode
OK
: Off
Clear Voice I I
3
3
-
00
Balance
+
0
F
L
R
G
: Standard
• SRS TruSurround XT : Off
• SRS TruSurround XT : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
E
1 MENU
Move
Auto Volume
: Off
• Level
Sound Mode
AUDIO
OK
: Off
Close
E
Select A U D I O.
SOUND CONTROL
2
OK
Select B a l a n c e.
OK
Make desired adjustment.
3
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
92
TV SPEAKERS ON/ OFF SETUP
You can adjust the TV internal speaker status.
In A V 1, A V 2, C o m p o n e n t 1 , C o m p o n e n t 2, R G B and H D M I 1 with HDMI to DVI cable, the TV speaker can
be operational even when there is no video signal.
If you wish to use an external Hi-Fi system, turn off the TV internal speakers.
AUDIO
Move
AUDIO
OK
E
Sound Mode
0
OK
Balance
0
L
R
: Standard
• SRS TruSurround XT : Off
• SRS TruSurround XT : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
: On
OK
• Reset
Digital Audio Out : PCM
On
TV Speaker
: Off
Off
On
On
SOUND CONTROL
2
R
Sound Mode
Digital Audio Out : PCM
1 MENU
L
: Standard
• Reset
TV Speaker
Move
E
Balance
Select A U D I O.
Select T V S p e a k e r.
3
OK
Select O n or O f f.
! NOTE
G
When the TV speaker is turned off while the Simplink home theater is operating, the sound output automatically switches to the Home theater speaker, but when the TV speaker is turned on, the sound output
the TV speaker.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
93
SOUND CONTROL
SELECTING DIGITAL AUDIO OUT
This function allows you to select your preferred Digital Audio Output.
Auto - allows original output DOLBY Digital if a channel is broadcast with Dolby Digital audio.
PCM - forces stereo PCM output.
When Dolby digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF(Sony Philips Digital
InterFace) output to Dolby Digital.
If Auto is selected in the digital audio out menu when dolby digital is not available, SPDIF output will be
PCM(Pulse-code Modulation).
Even if both Auto and Audio language have been set in a channel which broadcast Dolby Digital Audio, only
Dolby Digital will be played.
The product includes the capability to convert HE-AAC audio to Dolby Digital. This allows best quality audio and
surround sound support for any high definition broadcast format. Select “Auto” and mute TV speakers to enable
this at digital output.
AUDIO
Move
AUDIO
OK
E
Sound Mode
0
L
: Standard
R
Balance
Sound Mode
SOUND CONTROL
2
OK
L
• SRS TruSurround XT : Off
50
• Treble
• Bass
50
• Bass
50
• Reset
Auto
Digital Audio Out : PCM
Digital Audio Out : PCM
TV Speaker
TV Speaker
: Off
Select A U D I O.
Select D i g i t a l A u d i o O u t.
OK
R
: Standard
• Treble
3
OK
0
• SRS TruSurround XT : Off
• Reset
1 MENU
Move
E
Balance
50
PCM
PCM
: Off
Manufactured under license from
Dolby Laboratories. “Dolby “and
the double-D symbol are trademarks of Dolby Laboratories.
• There is a possibility that when HDMI mode,
some DVD players do not make SPDIF sound.
At that time, set the output of the digital audio
of the DVD player to PCM. (In HDMI, Dolby
Digital Plus is not supported)
Select A u t o or P C M.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
94
AUDIO RESET
Settings of the selected Sound Mode return to the default factory settings.
Move
E
• Level
Balance
Sound Mode
AUDIO
OK
Clear Voice I I
: Off
3
-
+
0
L
R
• Treble
50
• Bass
50
-
• Reset
E
2
OK
3
-
+
0
L
R
: Standard
+
• Treble
50
-
+
+
• Bass
Reset
•• Reset
50
-
+
E
SOUND CONTROL
1 MENU
• Level
i
TruSurround XTsound
: On mode configuration...
• SRSResetting
• SRS TruSurround XT : Off
-
OK
: Off
Balance
Sound Mode
: Standard
Move
E
AUDIO
Clear Voice I I
Select A U D I O.
Select R e s e t.
3
OK
Initialize the adjusted value.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
95
SOUND CONTROL
STEREO RECEPTION (IN ANALOGUE MODE ONLY)
When a programme is selected, the sound information for the station appears with the programme number
and station name.
1Q. MENU
Select A u d i o.
2
Selects the sound output.
OK
A
Broadcast
On Screen Display
Mono
MONO
Stereo
MONO / STEREO
Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of
sound is improved. To switch back to stereo.
SOUND CONTROL
SPEAKER SOUND OUTPUT SELECTION
In AV, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers.
Select the sound output.
L + R : Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio R input is
sent to the right loudspeaker.
L + L : Audio signal from audio L input is sent to left and right loudspeakers.
R + R : Audio signal from audio R input is sent to left and right loudspeakers.
96
TIME SETTING
CLOCK SETUP
The clock is set automatically when receiving a digital signal. (You can set the clock manually only if the TV has no
DTV signal.)
You must set the time correctly before using on/off timer function.
When you select a Time Zone city, the TV time is set by the time offset information based on Time Zone and
GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a
digital signal.
Once Clock is set in DTV mode, you cannot change time.
TIME
Move
TIME
OK
Move
OK
Date
Clock
Clock
Clock
Clock
Off Time
: Off
Off Time
: Off
On Time
: Off
On Time
: Off
Sleep Timer
: Off
Sleep Timer
: Off
F
01
Month
Jan.
Year
2009
Hour
00
Minute
00
Time Zone
G
NSW / ACT
GMT+10.0
Close
1 MENU
OK
3
OK
4
TIME SETTING
2
Select T I M E.
Select C l o c k.
Select either the year, month, date, time or Time Zone option.
Set the year, month, date, time and Time Zone options.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
97
TIME SETTING
AUTO ON/OFF TIMER SETTING
The Off time function automatically switches the TV to standby at a preset time.
Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode
unless a button has been pressed.
The Off time function overrides the On timer function if both are set to the same time.
The TV must be in standby mode for the On timer to work.
TIME
Move
TIME
OK
Clock
Move
Clock
01/Jan. 2006 00:00
Off Time
: Off
Off Time
:
On Time
: Off
On Time
: Off
Sleep Timer
: Off
OK
Sleep Timer
: Off
Repeat
F
Off
Hour
00
Minute
00
Mode
DTV
Programme
---
Volume
G
30
Close
1 MENU
Select T I M E.
TIME SETTING
• To cancel O n / O f f T i m e function, select O f f.
• For On Time function only
1
2
OK
OK
Select O f f T i m e or O n T i m e.
2
3
OK
Select R e p e a t.
3
4
Select O f f, O n c e, D a i l y, M o n ~ F r i,
M o n ~ S a t, S a t ~ S u n or S u n.
5
4
Select M o d e.
Select T V, A V 1~2 , C o m p o n e n t 1~2 ,
R G B or H D M I 1~3 .
Set the programme.
Adjust volume level at
switch-on.
Set the hour.
6
Set the minutes.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
98
SLEEP TIMER SETTING
You do not have to remember to switch the TV off before you go to sleep.
The sleep timer automatically switches the TV to standby after the preset time has elapsed.
TIME
Move
OK
Clock
TIME
Move
OK
Clock
Off Time
: Off
Off Time
On Time
: Off
On Time
Sleep Timer
Timer
Sleep
Off
:: Off
Sleep Timer
:
Standard
Off
: Off 10 min.
: Off 20 min.
30 min.
60 min.
90 min.
120 min.
180 min.
240 min.
1Q. MENU
OK
Select O f f, 1 0, 2 0, 3 0, 6 0, 9 0, 1 2 0, 1 8 0 or 2 4 0 m i n.
• When you switch the TV off, the preset sleep timer is cancelled.
• You can also adjust S l e e p T i m e r in the Q . M E N U.
TIME SETTING
2
Select S l e e p T i m e r.
99
PARENTAL CONTROL / RATINGS
SET PASSWORD & LOCK SYSTEM
Enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset.
Revitalize B l o c k P r o g r a m m e, P a r e n t a l G u i d a n c e and I n p u t B l o c k function.
LOCK
Move
Lock
Lock System
System
OK
: Off
: Off
Move
Off
Off: :Off
Set Password
Set Password
On
On
Block Programme
Block Programme
Parental Guidance
: Off
Input Block
1 MENU
LOCK
Lock System
Parental Guidance
OK
: Off
Input Block
Select L O C K.
• If you forget your password, press ‘7’, ‘7’, ‘7’, ‘7’ on the
remote control handset.
• If selecting O n, B l o c k P r o g r a m m e, P a r e n t a l
G u i d a n c e and I n p u t B l o c k operates.
2
PARENTAL CONTROL / RATINGS
OK
Select L o c k S y s t e m.
OK
Select O n.
3
4
OK
OK
5
1
2
3
4
5
6
7
8
9
0
Set the password.
Input a 4-digit password.
Be sure to remember this number!
Re-enter new password for confirm.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
100
BLOCK PROGRAMME
Blocks any programmes that you do not want to watch or that you do not want your children to watch.
O n”.
It is available to use this function in L o c k S y s t e m ”O
Enter a password to watch a blocked programme.
1
LOCK
Lock System
Move
ABC TV Sydney
OK
: Off
Set Password
Block
Block Programme
Programme
Parental Guidance
: Off
Input Block
DTV
RADIO
7 7 Digital
9 Nine Digital
10 ABC 2
11 ABC TV
12 ABC HDTV
13 ABC TV 1
14 ABC TV 2
70 7 HD Digital
71 7 Digital 1
72 7 Digital 2
14 TV4 Film
77 7 Guide
99 Nine Guide
Pr. Change
Navigation
TV
1 ABC TV Sydney
P
90 Nine Digital HD
100 ABC TV 3
Page Change
RETURN Previous
Block/Unblock
PARENTAL CONTROL / RATINGS
1 MENU
Select L O C K.
2
OK
Select B l o c k P r o g r a m m e.
3
OK
Enter the B l o c k P r o g r a m m e.
4
GREEN Select a programme to be locked.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
101
PARENTAL CONTROL / RATINGS
PARENTAL CONTROL (IN DIGITAL MODE ONLY)
This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate.
A password is required to gain access to this menu.
This TV is programmed to remember which option it was last set to even if you switch the TV off.
Prevents children from watching certain adult’s TV programmes, according to the ratings limit set
Enter a password to watch a rated programme.
LOCK
Lock System
Move
OK
: Off
Set Password
OK
Block Programme
: Off
: Off
Input Block
1 MENU
Move
: Off
Set Password
Block Programme
Parental Guidance
Guidance
Parental
LOCK
Lock System
Parental Guidance
Input Block
F
: Off
Off
G
Close
Select L O C K.
2
PARENTAL CONTROL / RATINGS
OK
Select P a r e n t a l G u i d a n c e.
OK
Make appropriate adjustments.
3
4
OK
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
102
INPUT BLOCK
Enables you to block an input.
LOCK
Lock System
Move
OK
: Off
Set Password
Lock System
Set Password
Block Programme
Parental Guidance
LOCK
Block Programme
: Off
Input Block
Parental Guidance
InputBlock
Block
Input
Move
OK
:AV1
Off
F
Off
AV2
Off
Component 1
: Off
Component 2
Off
RGB
Off
HDMI1
Off
G
Off
HDMI2
Off
HDMI3
Off
Close
1 MENU
Select L O C K.
2
Select I n p u t B l o c k.
OK
Select the source.
OK
Select O f f or O n.
PARENTAL CONTROL / RATINGS
OK
3
4
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
103
PARENTAL CONTROL / RATINGS
KEY LOCK
The TV can be set so that the remote control is required to control it. This feature can be used to prevent unauthorized viewing.
OPTION
Move
Subtitle
OK
: Off
Input Label
OPTION
Input Label
: On
SIMPLINK
Key
Key Lock
Lock
:: Off
Off
Key Lock
Off
:: Off
Off
Set ID
: Off
Set ID
On
: OffOn
ISM Method
: Normal
ISM Method
: Normal
Demo Mode
: Off
Demo Mode
: Off
: Home Use
Mode Setting
Select O P T I O N.
2
PARENTAL CONTROL / RATINGS
OK
Select K e y L o c k.
OK
Select O n or O f f.
3
OK
Save.
: On
: Home Use
E
E
4
OK
: Off
SIMPLINK
Mode Setting
1 MENU
Move
Subtitle
• Set ID: Off
O n’, if the TV is turned off, press
In K e y L o c k ‘O
the INPUT, P D or E button on the TV or POWER
buttons on the remote control then the set will be
turned on.
Set ID: On
O n’, if the TV is turned off, press
In K e y L o c k ‘O
the INPUT, P D or E button on the TV or
POWER, INPUT, P
or NUMBER buttons on
the remote control then the set will be turned on.
• With the K e y L o c k O n, the display ‘ X K e y L o c k
O n ’ appears on the screen if any button on the
front panel is pressed while viewing the TV. (Except
for r / I button)
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
104
TELETEXT
POWER
(IN DIGITAL MODE ONLY)
AV
V MODE
ENERGY SAVING
SAVING
LIST
Q.VIEW
This feature is not available in all countries.
Teletext is a free service broadcast by most TV stations which gives
up-to-the-minute information on news, weather, television programmes, share prices and many other topics.
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number
of pages which are selected by directly entering the corresponding
page number. TOP and FASTEXT are more modern methods allowing
quick and easy selection of teletext information.
SWITCH ON/OFF
MUTE
MENU
Q.MENU INFO
RETURN / EXIT
i
GUIDE
FAV
MARK
Press the T E X T button to switch to teletext. The initial page or last page
viewed appears on the screen.
Two page numbers, TV station name, date and time are displayed on the
screen headline. The first page number indicates your selection, while the
second shows the current page displayed.
Press the T E X T button to switch off teletext. The previous mode reappears.
FREEZE
SIMPLE TEXT
A
Page selection
1
Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you
press a wrong number, you must complete the three digit number and then re-enter the correct page number.
The P
button can be used to select the preceding or following page.
2
TOP TEXT
A
Block / group / page selection
1
4
With the blue button you can progress from block to block.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
With the green button you can proceed to the next existing page with automatic overflow to the next group.
Alternatively the P button can be used.
The red button returns to the previous selection. Alternatively the P button can be used.
A
Direct page selection
2
3
As with SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER
buttons in TOP mode.
TELETEXT
The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field
denotes the next group and the blue field indicates the next block.
105
TELETEXT
FASTEXT
The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button.
A Page selection
1
2
3
4
Press the T . O P T button and then use
button to select i menu. Display the index page.
You can select the pages which are colour coded along the bottom line with corresponding coloured buttons.
AS with SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode.
The P
button can be used to select the preceding or following page.
SPECIAL TELETEXT FUNCTIONS
■
Press the T . O P T button and then use
button to select the Text Option menu.
i
A Index
Select the each index page.
Text Option
Index
Time
Hold
A Time
When viewing a TV programme, select this menu to display the time at the top right hand
corner of the screen.
In the teletext mode, press this button to select a sub page number. The sub page number
is displayed at the bottom of the screen. To hold or change the sub page, press the
RED/GREEN,
or NUMBER buttons.
Reveal
Update
Close
TELETEXT
A Hold
Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this menu is
selected the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change
is inactive.
?
A Reveal
Select this menu to display concealed information, such as solutions to riddles or puzzles.
A Update
Displays the TV picture on the screen while waiting for a new teletext page. The display will appear at the
top left hand corner of the screen. When the updated page is available then display will change to the page
number. Select this menu again to view the updated teletext page.
106
APPENDIX
TROUBLESHOOTING
The TV does not operate properly.
Check to see if there is any object between the TV and the remote control causing
an obstruction. Ensure you are pointing the remote control directly at the TV.
A Ensure that the batteries are installed with correct polarity (+ to +, - to -).
A Install new batteries.
A
The remote control
does not work
Power is suddenly
turned off
Is the sleep timer set?
A Check the power control settings. Has the Power supply been interrupted.
A The TV goes into Standby mode automatically if no signal is received and no operation is performed for 15 minutes.
A
The video function does not work.
Check whether the TV is switched on.
A Try another channel. The problem may be with the broadcast.
A Is the power cord inserted correctly into the mains?
A Check your antenna direction and/or location.
A Test the mains outlet by plugging another TV into the same outlet.
A
No picture & No sound
Picture appears slowly
after switching on
A
This is normal, the image is muted during the TV startup process. Please contact
your service centre, if the picture has not appeared after five minutes.
Adjust Colour in menu option.
A Allow a sufficient distance between the TV and the VCR.
A Try another channel. The problem may be with the broadcast.
A Are the video cables installed properly?
A Activate any function to restore the brightness of the picture.
A
No or poor colour
or poor picture
Poor reception on
some channels
Lines or streaks
in pictures
No picture
when connecting HDMI
A
Check for local interference such as an electrical appliance or power tool.
Station or cable channel experiencing problems, tune to another station.
Station signal is weak, reposition the antenna to receive weaker stations.
A Check for sources of possible interference.
A
A
A
Check antenna (Change the position of the antenna).
A
Check that your HDMI cable is version 1.3 or higher.
If the HDMI cables don’t support HDMI version 1.3, flickering or no screen display
can result. Please use the latest cables that support at least HDMI version 1.3.
DIGITAL TELETEXT
Horizontal/vertical bars
or picture shaking
107
APPENDIX
The audio function does not work.
A
Picture OK & No sound
A
A
A
No output from one
of the speakers
+ or - button.
Press the
Sound muted? Press MUTE button.
Try another channel. The problem may be with the broadcast.
Are the audio cables installed properly?
A
Adjust B a l a n c e in menu option.
Unusual sound from
inside the TV
A
A change in ambient humidity or temperature may result in an unusual noise
when the TV is switched on or off and does not indicate a fault with the TV.
No sound when
connecting HDMI
or USB
A
Check HDMI cable over version 1.3.
Check USB cable over version 2.0.
A
*This feature is not available for all models.
There is a problem in PC mode. (Only PC mode applied)
The signal is out of range
(Invalid format)
Vertical bar or stripe on
background &
Horizontal Noise &
Incorrect position
Screen colour is unstable
or single colour
A
Adjust resolution, horizontal frequency, or vertical frequency.
A
Check the input source.
A
Use Auto configure or adjust clock, phase, or H/V position. (Option)
A
Check the signal cable.
Reinstall the PC video card.
A
There is a problem with PICTURE settings.
APPENDIX
108
When the user changes
the picture settings, the
TV automatically converts
back to the initial settings
after a certain period of
time.
A
It means that the TV is currently set to S t o r e D e m o mode.
To switch to H o m e U s e mode you should do the followings:
From the TV Menu, choose O P T I O N -> Choose M o d e S e t t i n g -> Choose
H o m e U s e.
Now, you have completed switching to the H o m e U s e mode.
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV.
Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1
A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water
and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it
to wipe the screen.
2
Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching on.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
A Do not to use a wet cloth.
A
Extended Absence
CAUTION
G
If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power
cord to protect against possible damage from lightning or power surges.
APPENDIX
109
APPENDIX
PRODUCT SPECIFICATIONS
MODELS
Dimensions
with stand
(Width x Height x Depth)
without stand
with stand
Weight
without stand
Power requirement
MODELS
Dimensions
50PQ20D-AA
50PS30FD-AA
60PS40FD-AA
1031.2 x 720.9 x 308.0 mm
40.6 x 28.4 x 12.1 inches
1216.7 x 818.1 x 353.0 mm
47.9 x 32.2 x 13.9 inches
1216.7 x 818.1 x 353.0 mm
47.9 x 32.2 x 13.9 inches
1468 x 1028.8 x 395.5 mm
57.7 x 40.5 x 15.5 inches
1031.2 x 656.7 x 80.8mm
40.6 x 25.9 x 3.2 inches
1216.7 x 759.0 x 83.0 mm
47.9 x 29.9 x 3.3 inches
1216.7 x 759.1 x 83.0 mm
47.9 x 29.9 x 3.3 inches
1468 x 949.5 x 88.5 mm
57.7 x 37.3 x 3.4 inches
24.8 kg / 54.7 lbs
22.7 kg / 50.1 lbs
33.7kg / 74.3 lbs
31.2 kg / 68.8 lbs
37.0 kg / 81.6 lbs
34.5 kg / 76.1 lbs
53.1 kg / 117 lbs
47.2 kg / 104 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
42PQ6***
50PQ6***
60PS6***
42PQ60D-AA
50PQ60D-AA
60PS60FD-AA
without stand
1031.2 x 656.7 x 80.8 mm
40.6 x 25.9 x 3.2 inches
1228.8 x 772 x 78.9 mm
48.3 x 30.3 x 3.1 inches
1465.4 x 903.2 x 82.1 mm
57.7 x 35.6 x 3.2 inches
with stand
25.3 kg / 55.7 lbs
23.3 kg / 5.3 lbs
35 kg / 77.1 lbs
32,5 kg / 71.6 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
51.3 kg / 113.1 lbs
45.5 kg / 100.3 lbs
AC100-240V~ 50/60Hz
PAL B/G, DVB-T
Programme Coverage
VHF 0-12, UHF 20-75, CATV 02-44, DTV 06-12, 27-69
External Antenna Impedance
Operating Temperature
Operating Humidity
Storage Temperature
APPENDIX
110
42PQ20D-AA
1465.4 x 982.6 x 395.5 mm
57.7 x 38.7 x 15.6 inches
Television System
Storage Humidity
■
60PS4***
1228.8 x 824.6 x353 mm
48.3 x 32.4 x 13.8 inches
Power requirement
Supported movie files
50PS3***
1031.2 x 720.9 x 308 mm
40.6x 28.4 x 12.1 inches
without stand
Environment condition
50PQ2***
with stand
(Width x Height x Depth)
Weight
42PQ2***
75 ohm
32 ~ 104°F (0 ~ 40°C)
Less than 80%
-4 ~ 140°F (-20 ~ 60°C)
Less than 85%
Refer to p. 63
The specifications shown above may be changed without prior notice for quality improvement.
IR CODES
1. How to Connect
A
Connect your wired remote control to the Remote Control port on the TV.
2. Remote Controls
A
Output waveform
Single pulse, modulated with 37.917KHz signal at 455KHz
Carrier frequency
Tc
FCAR = 1/Tc = fOSC/12
Duty ratio = T1/Tc = 1/3
T1
A
Configuration of frame
1st frame
Lead code
Low custom code
High custom code
Data code
Data code
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
Repeat frame
Repeat code
A
Tf
Lead code
9 ms
4.5 ms
A
Repeat code
0.55 ms
9 ms
Bit description
Bit ”0”
Bit ”1”
0.56 ms
0.56 ms
2.24 ms
1.12 ms
A
APPENDIX
A
2.25 ms
Frame interval: Tf
The waveform is transmitted as long as a key is depressed.
Tf
Tf
Tf=108ms @455KHz
111
APPENDIX
APPENDIX
112
Code (Hexa)
Function
08
0B
f0
45
43
AB
07
06
40
41
44
28
AA
30
02
03
00
01
1E
09
10 ~19
53
1A
72
71
63
61
20
21
39
7E
95
65
79
POWER
INPUT
TV/RAD
Q.MENU
MENU
GUIDE
Left ( )
Right ( )
Up ( )
Down ( )
OK( )
RETURN/EXIT
INFO i
AV MODE
+
P
P
FAV(MARK)
MUTE
Number Key 0~9
LIST
Q.VIEW
RED Key
GREEN Key
YELLOW Key
BLUE Key
TEXT
T.OPT(T.Option)
SUBTITLE
SIMPLINK
ENERGY SAVING
FREEZE(Exceptfor42/50PQ2***)
RATIO (Exceptfor42/50PQ2***)
Note
R/C BUTTON (POWER ON/OFF)
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
EXTERNAL CONTROL DEVICE SETUP
RS-232C Setup
Connect the RS-232C (serial port) input jack to an
external control device (such as a computer or an A/V
control system) to control the product’s functions
externally.
Connect the serial port of the control device to the
RS-232C jack on the product back panel.
Note: RS-232C connection cables are not supplied
with the product.
Type of Connector; D-Sub 9-Pin Male
No.
Pin Name
1
2
3
4
5
6
7
8
9
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
1
5
6
9
No Connection
RS-232C Configurations
7-Wire Configurations (Standard RS-232C cable)
TV
2
3
5
4
6
7
8
3
2
5
6
4
8
7
D-Sub 9
D-Sub 9
TXD
RXD
GND
DSR
DTR
CTS
RTS
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
7
8
D-Sub 9
D-Sub 9
TXD
RXD
GND
DTR
DSR
RTS
CTS
APPENDIX
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
3-Wire Configurations(Not standard)
113
APPENDIX
Set ID
Use this function to specify a set ID number.
Refer to ‘Real Data Mapping’. G p .118
OPTION
Move
Subtitle
OK
: On
Input Label
Move
Subtitle
OK
: On
Input Label
SIMPLINK
: On
SIMPLINK
Key Lock
: Off
Key Lock
: Off
Set ID
: Off
Set ID
: Off: 1
ISM Method
: Normal
ISM Method
: Normal
: Off
Demo Mode
: Off
: Home Use
Mode Setting
: Home Use
Demo Mode
Mode Setting
1 MENU
OPTION
E
: On
F
E
1
G
Close
Select O P T I O N.
2
OK
3
OK
Select S e t I D.
Adjust Set ID to choose the desired TV ID number.
The adjustment range of SET ID is 1~99.
APPENDIX
• Press R E T U R N to move to the previous menu screen.
114
Communication Parameters
Baud rate : 9600 bps (UART)
A Data length : 8 bits
A Parity : None
Stop bit : 1 bit
A Communication code : ASCII code
A Use a crossed (reverse) cable.
A
A
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
Command Reference List
COMMAND COMMAND
DATA
1
2
(Hexadecimal)
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
j
j
j
m
m
m
x
a
c
d
e
f
g
h
i
j
k
l
m
r
s
t
u
z
p
q
u
a
b
c
b
00 ~ 01
Refer to p. 116
Refer to p. 116
00 ~ 01
00 ~ 64
00 ~ 64
00 ~ 64
00 ~ 64
00 ~ 64
00 ~ 64
00 ~ 01
00 ~ 01
00 ~ 64
00 ~ 64
00 ~ 64
00 ~ 02
FF
Refer to p. 118
Refer to p. 118
01
Refer to p. 118
00 ~ 01
Refer to p. 119
Refer to p. 119
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The set transmits ACK (acknowledgement) based on
this format when receiving normal data. At this time, if
the data is data read mode, it indicates present status
data. If the data is data write mode, it returns the
data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* The set transmits ACK (acknowledgement) based on
this format when receiving abnormal data from
non-viable functions or communication errors.
When
setting
the
17
~
24,
a
menu
does
not
appear
on
screen.
*
* Note: During USB operation such as Dvix or EMF, all commands except Power(ka) and Key(mc) are not executed and Data 00: Illegal Code
treated as NG.
APPENDIX
01. Power
02. Aspect Ratio
03. Screen Mute
04. Volume Mute
05. Volume Control
06. Contrast
07. Brightness
08. Colour
09. Tint
10. Sharpness
11. OSD Select
12. Remote control lock mode
13. Treble
14. Bass
15. Balance
16. Colour Temperature
17. Abnormal Status
18. ISM Method
19. Energy Saving
20. Auto Configure
21. Tune Command
22. Channel Add/Skip
23. Key
24.Input select (Main)
* [Command 1] : First command to control the TV.
(j, k, m or x)
[Command
2]
:
Second
command to control the TV.
*
: You can adjust the set ID to choose
* [Set ID]
desired monitor ID number in option
menu. Adjustment range is 1 ~ 99.
When selecting Set ID ‘0’, every connected set is controlled.
Set ID is indicated as decimal (1~99) on
menu and as Hexa decimal (0x0~0x63)
on transmission/receiving protocol.
: To transmit command data.
* [DATA]
Transmit ‘FF’ data to read status of command.
[Cr]
:
Carriage
Return
*
ASCII code ‘0x0D’
: ASCII code ‘space (0x20)’
* [ ]
115
APPENDIX
01. Power (Command: k a)
0 4 . V o l u m e M u t e (C o m m a n d : k e )
G To control Power On/Off of the set.
G To control volume mute on/off.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
You can also adjust mute using the MUTE button on
remote control.
Transmission
Data 00 : Power Off
Ack
[k][e][ ][Set ID][ ][Data][Cr]
01 : Power On
G To show Power On/Off.
Data 00 : Volume mute on (Volume off)
01 : Volume mute off (Volume on)
Ack
Transmission
[e][ ][Set ID][ ][OK/NG][Data][x]
[a][ ][Set ID][ ][OK/NG][Data][x]
[k][a][ ][Set ID][ ][FF][Cr]
0 5 . V o l u m e C o n t r o l (C o m m a n d : k f )
Ack
G To adjust volume.
[a][ ][Set ID][ ][OK/NG][Data][x]
* Similarly, if other functions transmit ‘0xFF’ data based
on this format, Acknowledgement data feed back presents status about each function.
* OK Ack., Error Ack. and other message may display on
the screen when TV is power On.
[k][f][ ][Set ID][ ][Data][Cr]
0 2 . A s p e c t R a t i o (C o m m a n d : k c ) ( M a i n P i c t u r e S i z e )
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 118.
Ack
G To adjust the screen format. (Main picture format)
[f][ ][Set ID][ ][OK/NG][Data][x]
You can also adjust the screen format using the
A s p e c t R a t i o in the Q.MENU. or PICTURE menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 01 : Normal screen (4:3)
02 : Wide screen (16:9)
04 : Zoom
06 : Original
Ack
0 6 . C o n t r a s t (C o m m a n d : k g )
G To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission
07 : 14:9
[k][g][ ][Set ID][ ][Data][Cr]
09 : Just Scan
10~1F : Cinema Zoom 1~16 Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 118.
Ack
[c][ ][Set ID][ ][OK/NG][Data][x]
[g][ ][Set ID][ ][OK/NG][Data][x]
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
* In DTV(576p)/HDMI (1080i 50Hz/60Hz, 720p
50Hz/60Hz, 1080p 24Hz/30Hz/50Hz/60Hz),
Component( 720p, 1080i, 1080p 50Hz/60Hz) mode,
Just Scan is available.
0 7 . B r i g h t n e s s (C o m m a n d : k h )
G To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission
0 3 . S c r e e n M u t e (C o m m a n d : k d )
G To select screen mute on/off.
APPENDIX
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 00 : Screen mute off (Picture on)
Video mute off
01 : Screen mute on (Picture off)
Ack 10 : Video mute on
[d][ ][Set ID][ ][OK/NG][Data][x]
* In case of video mute on only, TV will display On Screen
Display(OSD). But, in case of Screen mute on, TV will not
display OSD.
116
You can also adjust volume with the VOLUME buttons on
remote control.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 118.
Ack
[h][ ][Set ID][ ][OK/NG][Data][x]
0 8 . C o l o u r (C o m m a n d : k i )
G To adjust the screen colour.
You can also adjust colour in the PICTURE menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 118.
Ack
[i][ ][Set ID][ ][OK/NG][Data][x]
0 9 . T i n t (C o m m a n d : k j )
14. Bass (Command: k s)
G To adjust the screen tint.
G To adjust bass.
You can also adjust tint in the PICTURE menu.
You can also adjust bass in the AUDIO menu.
Transmission
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data Red : 00 ~ Green : 64
* Refer to ‘Real data mapping 1’. See page 118.
Ack
[k][s][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 118.
Ack
[j][ ][Set ID][ ][OK/NG][Data][x]
[s][ ][Set ID][ ][OK/NG][Data][x]
1 0 . S h a r p n e s s (C o m m a n d : k k )
G To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 118.
Ack
[k][ ][Set ID][ ][OK/NG][Data][x]
15. Balance (Command: k t)
G To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 118.
Ack
[t][ ][Set ID][ ][OK/NG][Data][x]
1 1 . O S D S e l e c t (C o m m a n d : k l )
G To select OSD (On Screen Display) on/off when controlling remotely.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 00 : OSD off
Ack
01 : OSD on
[l][ ][Set ID][ ][OK/NG][Data][x]
1 2 . Remote control lock mode ( C o m m a n d : k m )
G To lock the front panel controls on the monitor and
remote control.
Transmission
G To adjust colour temperature. You can also adjust Colour
Temperature in the PICTURE menu.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 00: Medium 01:Cool
Ack
02: Warm
[u][ ][Set ID][ ][OK/NG][Data][x]
17. Abnormal State (Command: k z)
G To recognize an abnormal state.
[k][m][ ][Set ID][ ][Data][Cr]
Data 00 : Lock off
Ack
16. Colour Temperature (Command: k u)
01 : Lock on
[m][ ][Set ID][ ][OK/NG][Data][x]
13. Treble (Command: k r)
G To adjust treble.
You can also adjust treble in the AUDIO menu.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 118.
Ack
[r][ ][Set ID][ ][OK/NG][Data][x]
[k][z][ ][Set ID][ ][FF][ ][Cr]
Data FF : Read
Ack
[z][ ][Set ID][ ][OK/NG][Data][x]
Data 00: Normal (Power on and signal exist)
01: No signal (Power on)
02: Turn the TV off by remote control
03: Turn the TV off by sleep time function
04: Turn the TV off by RS-232C function
05: 5V down
06: AC down
07: Turn the TV off by Fan Alarm function
08: Turn the TV off by Off time function
09: Turn the TV off by Auto sleep function
a: Turn the TV off by AV board detection.
APPENDIX
* If you are not using the remote control, use this mode.
When main power is on/off, external control lock is
released.
* Local Power Key will work properly.
Transmission
* This function is “read only”.
117
APPENDIX
18. ISM Method (Command: j p)
21.Tune Command (Command: m a)
G To control the ISM method. You can also adjust ISM
G Select channel to following physical number.
Method in OPTION menu.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data 02: Orbiter
04: White wash
08: Normal
20 : Colour Wash
Ack
[p][ ][Set ID][ ][OK/NG][Data][x]
Transmission
[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr]
Data00 : High channel data
Data01 : Low channel data
ex. No. 47 -> 00 2F (2FH)
No. 394 -> 01 88 (188H),
DTV No. 0 -> Don’t care
Data020x00 : ATV Main
0x10 : DTV Main
0x20 : Radio
Channel data range
Analogue - Min: 00 ~ Max: 63 (0~99)
Digital - Min: 00 ~ Max: 3E7 (0~999)
19. Energy Saving
(Command: j q)
Ack
G To reduce the power consumption of the TV. You can also
Data Min: 00 ~ Max: FF
adjust Energy Saving in OPTION menu.
Transmission
[a][ ][Set ID][ ][OK/NG][Data][x]
[j][q][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: Minimum
02: Medium
03: Maximum
10 : Intelligent Sensor(Low)
11 : Intelligent Sensor(Middle)
12 : Intelligent Sensor(High)
Ack
[q][ ][Set ID][ ][OK/NG][Data][x]
22. Channel Add/Skip(Command: m b)
G To set skip status for the current Programme.
Transmission
[m][b][ ][Set ID][ ][Data][Cr]
Data 00 : Skip
01 : Add
Ack
[b][ ][Set ID][ ][OK/NG][Data][x]
20. Auto Configure(Command: j u)
G To adjust picture position and minimize image shaking
automatically. It works only in RGB (PC) mode.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 01: To set
Ack
[u][ ][Set ID][ ][OK/NG][Data][x]
* Real data mapping 1
00 :
Step 0
A : Step 10 (Set ID 10)
APPENDIX
F : Step 15 (Set ID 15)
10 : Step 16 (Set ID 16)
64 : Step 100
6E : Step 110
73 : Step 115
74 : Step 116
C7: Step 199
FE : Step 254
FF : Step 255
118
* Real data mapping 2
00 :-40
01 :-39
02 :-38
28 :0
4E : +38
4F : +39
50 : +40
23. Key(Command: m c)
G To send IR remote key code.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data Key code - Refer to page 112.
Ack
[c][ ][Set ID][ ][OK/NG][Data][x]
2 4 . I n p u t s e l e c t (C o m m a n d : x b )
(Main Picture Input)
G To select input source for main picture.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data Structure
MSB
0
LSB
0
0
0
0
0
0
External Input
Input Number
External Input
Data
0
0
0
0
DTV
0
0
0
1
Analogue
0
0
1
0
AV
0
1
0
0
Component
0
1
0
1
RGB
1
0
0
1
HDMI
Input Number
0
Data
0
0
0
0
Input1
0
0
0
1
Input2
0
0
1
0
Input3
[b][ ][Set ID][ ][OK/NG][Data][x]
APPENDIX
Ack
119
Download PDF