LG | 50PS80FD | LG 42PQ60D Owner’s Manual

ENGLISH
PLASMA TV
OWNER’S MANUAL
4 2 P Q 6* * *
5 0 P Q 6* * *
50PS3***
5 0 P S 8* * *
60PS8***
Please read this manual carefully before operating
your TV.
Retain it for future reference.
Record the model number and serial number of the
TV.
Refer to the label on the back cover and quote this
information.
To your dealer when requiring any service.
Trade Mark of the DVB Digital Video
Broadcasting Project (1991 to 1996)
I D N u m b e r ( s ) : 6422: 42PQ60D-GA
6493: 50PQ60D-GA
6492: 50PS80FD-GA
6767: 50PS30FD-GA
6766: 60PS80FD-GA
HDMI TM , the HDMI logo and HighDefinition Multimedia Interface
are trademarks or registered
trademarks of HDMI Licensing.
ACCESSORIES
■
Image shown may differ from your TV.
RATIO
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the
dealer where you purchased the TV.
RATIO
TIO
FREEZE
Owner’s Manual
Batteries
Cable management clip
Remote Control
(Refer to p.9)
(Only 50/60PS8***)
x2
x4
Power Cord
Protection cover
Bolts for stand assembly
Cable Holder
(Refer to p.13)
(Refer to p.8)
(Except for 60PS8***)
(Refer to p.9)
Wall Mounting Bracket
(Separate purchase)
This item is not included for all models.
* Lightly wipe any stains
or fingerprints on the
surface of the TV with
the polishing cloth.
Polishing Cloth Do not use excessive force.
Polishing cloth for This may cause scratching
use on the screen. or discolouration.
AW-50PG60MS
(Except for 60PS8***)
AW-60PG60MS
(Only 60PS8***)
Ferrite Core
(This item is not included for
all models.)
Use of ferrite core (This item is not included for all models.)
Ferrite core can be used to reduce the electromagnetic
wave when connecting the power cord.
The closer the location of the ferrite core to the power
plug, the better it is.
Install the power plug closely.
1
CONTENTS
ACCESSORIES
............................................
1
PREPARATION
CONTENTS
Front Panel Controls..................................................... 4
Back Panel Information ................................................ 6
Stand Installation........................................................... 8
Back Cover for Wire Arrangement ............................ 9
Careful installation advice ..................................... 10
Swivel Stand ...................................................................11
Desktop Pedestal Installation................................ 11
Wall Mount: Horizontal Installation ........................ 12
Not Using the desk-type stand.................................13
Antenna Connection................................................... 14
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup ...................................................... 15
DVD Setup..................................................................... 18
VCR Setup..................................................................... 20
AV Output Setup ........................................................ 22
Digital Audio Out Setup............................................ 23
Other A/V Source Setup........................................... 24
Usb Setup...................................................................... 25
PC Setup........................................................................ 26
- Screen Setup for PC Mode ...............................30
WATCHING TV / PROGRAMME CONTROL
Remote Control Key Functions ............................... 34
Turning on the TV....................................................... 36
Programme Selection ................................................ 36
Volume Adjustment ................................................... 36
Quick Menu ................................................................. 37
On-Screen Menus Selection and Adjustment..... 38
Auto Programme Tuning............................................ 39
Manual Programme Tuning (In Digital Mode)..... 40
Manual Programme Tuning (In Analogue Mode) ... 41
Programme Edit ........................................................... 43
Software Update.......................................................... 45
Diagnostics ................................................................... 46
Selecting the Programme List .................................. 47
2
Favourite Programme Setup...................................... 48
Input List........................................................................ 49
Input Label .................................................................... 50
Simple manual............................................................... 51
................................................................. 52
AV Mode........................................................................ 55
Initializing (Reset to original factory settings) .....56
TO USE A USB DEVICE
When connecting the a USB device ...................... 57
Photo List ...................................................................... 58
Music List........................................................................62
Movie List .......................................................................65
DivX Registration Code..............................................69
Deactivation...................................................................70
EPG (ELECTRONIC PROGRAMME
GUIDE) (IN DIGITAL MODE)
Switch on/off EPG ...................................................... 71
Select a Programme.................................................... 71
Button Function in NOW/NEXT Guide Mode ....... 71
Button Function in 8 Day Guide Mode..................72
Button Function in Date Change Mode................ 72
Button Function in Extended Description Box......... 73
Button Function in Remind Setting Mode......................... 73
Button Function in Schedule List Mode................ 73
MHEG (MULTIMEDIA AND HYPERMEDIA INFORMATION CODING EXPERT
GROUP) (IN DIGITAL MODE)
Switch on MHEG ......................................................... 74
Select a Programme.................................................... 74
Button Function in NOW/NEXT Guide Mode ......75
Button Function in Listing Mode .............................. 75
PICTURE CONTROL
Set Password & Lock System................................. 103
Block Programme ...................................................... 104
Parental Control (In Digital Mode only)............. 105
External Input Blocking.............................................106
Key Lock ...................................................................... 107
CONTENTS
Picture Size (Aspect Ratio) Control....................... 76
Picture Wizard................................................................78
Energy Saving ................................................................79
Preset Picture Settings
- Picture Mode-Preset............................................ 80
Manual Picture Adjustment
- Picture Mode-User option................................. 81
Picture Improvement Technology........................... 82
Expert Picture Control............................................... 83
Picture Reset................................................................. 86
Image Sticking Minimization (ISM) Method .........87
Demo Mode.................................................................. 88
Mode Setting.................................................................89
PARENTAL CONTROL / RATINGS
TELETEXT
Switch on/off ............................................................. 108
SIMPLE Text................................................................ 108
TOP Text...................................................................... 108
FASTEXT...................................................................... 109
Special Teletext Functions ...................................... 109
APPENDIX
SOUND & LANGUAGE CONTROL
Auto Volume Leveler................................................... 90
Clear Voice II..................................................................91
Preset Sound Settings - Sound Mode................... 92
Sound Setting Adjustment -User Mode.................93
SRS TruSurround XT .................................................. 93
Balance........................................................................... 94
TV Speakers On/ Off Setup......................................95
Selecting Digital Audio Out ......................................96
Audio Reset ....................................................................97
Stereo Reception (In Analogue Mode Only) ............98
Speaker Sound Output Selection .......................... 98
Language Selection (In Digital Mode only)......... 99
Troubleshooting ......................................................... 110
Maintenance ............................................................... 112
Product Specifications.............................................. 113
IR Codes....................................................................... 114
External Control Device Setup............................... 116
Open Source Software Notice............................... 123
Open Source License ............................................... 124
TIME SETTING
Clock Setup................................................................ 100
Auto On/ Off Time Setting .................................... 101
Sleep Timer Setting .................................................. 102
3
PREPARATION
FRONT PANEL CONTROLS
■
Image shown may differ from your TV.
PREPARATION
CAUTION
When the TV cannot be turned on with the remote control, press the main power button on the TV.
(When the power is turned off with the main power button on the TV, it will not be turned on with the
remote control).
G Do not step on the glass stand or subject it to any impact.
It may break, causing possible injury from fragments of glass, or the TV may fall.
G Do not drag the TV. The floor or the product may be damaged.
G
42/50PQ6***
P
PROGRAMME
P
VOLUME
OK
OK
MENU
MENU
INPUT
INPUT
Remote Control
Sensor
MENU
INPUT
OK
P
Intelligent Sensor
Adjusts picture according to the surrounding
conditions
Power/Standby Indicator
• Illuminates red in standby mode.
• The LED is off while the TV remains on.
4
POWER
50/60PS8***
PROGRAMME
P
Intelligent Sensor
Adjusts picture according
to the surrounding conditions.
Remote Control
Sensor
PREPARATION
P
VOLUME
OK
OK
MENU
MENU
INPUT
Power/Standby Indicator
• Illuminates red in standby mode.
• The LED is off while the TV remains on.
INPUT
POWER
50PS3***
Remote Control
Sensor
Intelligent Sensor
Adjusts picture according
to the surrounding
conditions.
Power/Standby Indicator
• Illuminates red in standby mode.
• Illuminates blue when the TV is switched on.
MENU
INPUT
INPUT
INPUT
MENU
OK
OK
INPUT
MENU
P
P
OK
MENU
OK
VOLUME
P
PROGRAMME
POWER
5
3
PREPARATION
A
VIDEO L/MONO AUDIO R S-VIDEO
BACK PANEL INFORMATION
Image shown may differ from your TV.
Only 42/50PQ6***, 50PS3***
PREPARATION
R
AV IN 2
1
11
3
3
2
2
COMPONENT IN
AUDIO IN
(RGB/DVI)
AV
IN1
4
5
6
7
OUT
1
2
9
8
7
AV IN 2
10
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
7
Audio/Video Input (AV IN1 / AV IN2)
Connect audio/video output from an external
device to these jacks.
2
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of equipment.
Use to connect to a Digital Audio Component.
Use an Optical audio cable.
8
AV Output
Connect second TV or monitor to the AV OUT
socket on the TV.
9
Component Input
Connect a component video/audio device to
these jacks.
10
Antenna Input
Connect RF antenna to this jack.
11
USB Input
Connect USB storage device to this jack.
3
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
4
HDMI Input
Connect a HDMI signal to HDMI IN or DVI (VIDEO)
signal to HDMI/DVI port with DVI to HDMI cable.
5
RGB IN Input
Connect the output from a PC.
6
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
NENT IN
1
COMPONENT IN
6
VARIABLE AUDIO OUT
R - AUDIO - L
R-AUDIO-L(MONO)
VIDEO
VIDED
1
L/MONO
MONO AUDIO R
VIDEO L/
4
4
AV IN 2
1
11
3
3
COMPONENT IN
AUDIO IN
(RGB/DVI)
IN1
4
5
6
OUT
7
VIDEO
R -AUDIO-L
)
(
1
R - AUDIO - L
R-AUDIO-L(MONO)
2
VIDEO
VIDED
AV
1
2
7
2
AV IN 2
9
8
L/MONO
MONO AUDIO R
VIDEO L/
4
USB IN
4
2
PREPARATION
VIDEO L/MONO AUDIO R
Only 50/60PS8***
10
7
Audio/Video Input (AV IN1 / AV IN2)
Connect audio/video output from an external
device to these jacks.
2
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of equipment.
Use to connect to a Digital Audio Component.
Use an Optical audio cable.
8
AV Output
Connect second TV or monitor to the AV OUT
socket on the TV.
9
Component Input
Connect a component video/audio device to
these jacks.
10
Antenna Input
Connect RF antenna to this jack.
11
USB Input
Connect USB storage device to this jack.
3
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
4
HDMI Input
Connect a HDMI signal to HDMI IN or DVI (VIDEO)
signal to HDMI/DVI port with DVI to HDMI cable.
5
RGB IN Input
Connect the output from a PC.
6
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
OMPONENT IN
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
COMPONENT IN
1
7
PREPARATION
STAND INSTALLATION (Except for 60PS8***)
■
Image shown may differ from your TV
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can
tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion
of the tightening part of the bolt.
PREPARATION
Only 42/50PQ6***, 50PS3***
1
Carefully place the TV screen side down on a cushioned
surface to protect the screen from damage.
2
Assemble the TV as shown.
3
1
Carefully place the TV screen side down on a cushioned
surface to protect the screen from damage.
2
Assemble the TV as shown.
3
Fix the 4 bolts securely using the holes in the
back of the TV.
Fix the 4 bolts securely using the holes in the
back of the TV.
! NOTE
FRONT
8
Only 50PS8***
G
FRONT
When assembling the stand, make sure to distinguish
and assemble the front and rear side of the stand correctly.
BACK COVER FOR WIRE ARRANGEMENT
■
Image shown may differ from your TV.
After Connecting the cables as necessary, install CABLE
HOLDER as shown and bundle the cables.
PREPARATION
CABLE HOLDER
Only 50/60PS8***
After Connecting the cables as necessary, install
CABLE HOLDER as shown and bundle the cables.
To connect additional equipment, see the
E x t e r n a l e q u i p m e n t S e t u p section.
1
2
Install the C A B L E M A N A G E M E N T C L I P as shown.
CABLE HOLDER
CABLE MANAGEMENT CLIP
How to remove the cable management clip
Hold the C A B L E M A N A G E M E N T C L I P with both hands and pull it upward.
! NOTE
G
Do not use the CABLE MANAGEMENT CLIP to lift the TV.
- If the TV is dropped, you may be injured or the TV may be damaged.
9
PREPARATION
CAREFUL INSTALLATION ADVICE
You should purchase necessary components to fix the TV safety and secure to the wall from a hardware supplier.
Position the TV close to the wall to avoid the possibility of it falling when pushed.
A The instructions shown below are a safer way to set up the TV, by fixing it to the wall, avoiding the possibility
of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.
A
A
PREPARATION
1
1
2
2
1
Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen then bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
2
Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the
wall.
3
3
Use a sturdy rope or wire to tie the product for alignment. It is safer to tie the rope so it becomes horizontal between the wall and the product.
! NOTE
G
G
G
10
When moving the TV undo the cords first.
Use a platform or cabinet strong and large enough to support the size and weight of the TV.
To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.
SWIVEL STAND
After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit
your viewing position.
PREPARATION
A
A
The TV can be installed in various ways such as on a wall, or on a desktop etc.
The TV is designed to be mounted horizontally.
EARTHING
Ensure that you connect the earth wire to prevent possible
electric shock. If grounding methods are not possible, have
a qualified electrician install a separate circuit breaker.
Do not try to earth the TV by connecting it to telephone
wires, lightening rods or gas pipes.
Power Supply
Circuit breaker
DESKTOP PEDESTAL INSTALLATION
For adequate ventilation allow a clearance of 4” (10cm) all around the TV.
4 inches
4 inches
4 inches
4 inches
11
INPUT
MENU
OK
P
PREPARATION
WALL MOUNT: HORIZONTAL INSTALLATION
We recommend the use of a LG Brand wall mounting bracket when mounting the TV to a wall.
We recommend that you purchase a wall mounting bracket which supports VESA standard.
A LG recommends that wall mounting be performed by a qualified professional installer.
A
A
PREPARATION
Model
4 inches
4 inches
4 inches
4 inches
4 inches
42PQ6***
50PQ6***
50PS3***
50PS8***
60PS8***
VESA Standard
(A * B)
Screw Quantity
400 * 400 M6
4
400 * 400 M6
4
400 * 400 M6
4
400 * 400 M6
4
600 * 400 M8
4
A
B
! NOTE
Should Install wall mount on a solid wall perpendicular to the floor.
Should use a special wall mount, if you want to install it to ceiling or slanted wall.
G The surface that wall mount is to be mounted on should be of sufficient strength to support the weight of TV set;
e.g. concrete, natural rock, brick and hollow block.
G Installing screw type and length depends on the wall mount used. Further information, refer to the instructions
included with the mount.
G LG is not liable for any accidents or damage to property or TV due to incorrect installation:
- Where a non-compliant VESA wall mount is used.
- Incorrect fastening of screws to surface which may cause TV to fall and cause personal injury.
- Not following the recommended Installation method.
G
G
12
NOT USING THE DESK-TYPE STAND
■
Image shown may differ from your TV.
When installing the wall-mounted unit, use the protection cover.
PREPARATION
PROTECTION COVER
Insert the P R O T E C T I O N C O V E R into the TV until clicking sound.
13
PREPARATION
■
To prevent damage do not connect to the mains outlet until all connections are made between the devices.
ANTENNA CONNECTION
For optimum picture quality, adjust antenna direction.
■ An antenna cable and converter are not supplied.
COMPONENT IN
EXTERNAL EQUIPMENT SETUP
VIDEO L/MONO AUDIO R S-VIDEO
HDMI IN 3
■
Wall
Antenna
Socket
AV IN 3
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
RF Coaxial Wire (75 ohm)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
COMPONENT IN
Outdoor
Antenna
(VHF, UHF)
UHF
Signal
Amplifier
Antenna
VHF
■
COMPONENT IN
■
In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the
antenna as shown above.
If signal needs to be split for two TVs, use an antenna signal splitter for connection.
14
EXTERNAL EQUIPMENT SETUP
To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.
This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 42/50PQ6*** models.
■
■
Image shown may differ from your TV.
■
HD RECEIVER SETUP
■
This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive
Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.
Connecting with a component cables
2
Connect the audio output of the digital set-top box to
the C O M P O N E N T I N A U D I O jacks on the TV.
3
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
COMPONENT IN
Connect the video outputs (Y, PB, PR) of the digital set
top box to the C O M P O N E N T I N V I D E O jacks on the
TV.
1
2
1
4
Select C o m p o n e n t 1 input source using the I N P U T
button on the remote control.
If connected to C O M P O N E N T I N 2 input, select
C o m p o n e n t 2 input source.
Signal
Component
HDMI
480i/576i
O
X
480p/576p
O
O
720p/1080i
O
O
1080p
O
O
(50Hz/60Hz only)
(24Hz/30Hz/50Hz/60Hz)
2
EXTERNAL EQUIPMENT SETUP
1
15
EXTERNAL EQUIPMENT SETUP
Connecting a set-top box with an HDMI cable
EXTERNAL EQUIPMENT SETUP
1
Connect the digital set-top box to H D M I / D V I I N 1,
H D M I I N 2 , H D M I I N 3 or H D M I I N 4(Only
50/60PS8***) jack on the TV.
2
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
3
42/50PQ6***, 50PS3***
2
1
Select H D M I 1, H D M I 2 , H D M I or H D M I I N 4(Only
50/60PS8***) input source using the I N P U T button
on the remote control.
! NOTE
G
1
Check that your HDMI cable is version 1.3 or higher.
If the HDMI cables don’t support HDMI version 1.3, flicker
ing or no screen display can result. Please use the latest
cables that support at least HDMI version 1.3.
50/60PS8***
3
2
1
1
16
Connecting with an HDMI to DVI cable
COMPONENT IN
VIDEO
IN1
Select H D M I 1 input source using the I N P U T button
on the remote control.
1
OUT
1
2
50/60PS8***
3
COMPONENT IN
AUDIO IN
(RGB/DVI)
2
AV
VIDEO
VIDEO
1
R - AUDIO - L
R-AUDIO-L(MONO)
COMPONENT IN
4
AV
1
R - AUDIO - L
Turn on the digital set-top box. (Refer to the owner’s
manual for the digital set-top box.)
2
VIDEO
3
AUDIO IN
(RGB/DVI)
EXTERNAL EQUIPMENT SETUP
2
Connect the audio output of the digital set-top box to
the A U D I O I N ( R G B / D V I ) jack on the TV.
42/50PQ6***, 50PS3***
R-AUDIO-L(MONO)
Connect the digital set-top box to H D M I / D V I I N 1
jack on the TV.
COMPONENT IN
1
IN1
1
OUT
1
2
17
EXTERNAL EQUIPMENT SETUP
DVD SETUP
EXTERNAL EQUIPMENT SETUP
1
Connect the video outputs (Y, PB, PR) of the DVD to the
C O M P O N E N T I N V I D E O jacks on the TV.
2
Connect the audio outputs of the DVD to the
C O M P O N E N T I N A U D I O jacks on the TV.
3
Turn on the DVD player, insert a DVD.
4
Select C o m p o n e n t 1 input source using the I N P U T
button on the remote control.
If connected to C O M P O N E N T I N 2 input, select
C o m p o n e n t 2 input source.
5
Refer to the DVD player's manual for operating
instructions.
COMPONENT IN
Connecting with a component cables
1
2
1
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV
Video output ports
on DVD player
18
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
2
Connecting the HDMI cable
3
Select H D M I 1, H D M I 2, H D M I 3 or H D M I 4(Only
50/60PS8***) input source using the I N P U T button on
the remote control.
42/50PQ6***, 50PS3***
2
1
Refer to the DVD player's manual for operating
instructions.
1
! NOTE
G The
TV can receive video and audio signals simultaneously
when using a HDMI cable.
G If the DVD does not support Auto HDMI, you must set the
output resolution appropriately.
G Check that your HDMI cable is version 1.3 or higher.
If the HDMI cables don’t support HDMI version 1.3, flickering
or no screen display can result. Please use the latest cables that
support at least HDMI version 1.3.
EXTERNAL EQUIPMENT SETUP
2
Connect the HDMI output of the DVD to the
H D M I / D V I I N 1, H D M I I N 2, H D M I I N 3 or H D M I
I N 4(Only 50/60PS8***) jack on the TV.
50/60PS8***
3
2
1
1
19
COMPONENT IN
1
AV IN 1
AV OUT
VIDEO
VIDEO
L
L/MONO
EXTERNAL EQUIPMENT SETUP
AUDIO
AUDIO
R
R
VCR SETUP
■
To avoid picture noise (interference), allow adequate distance between the VCR and TV.
R - AUDIO - L
EXTERNAL EQUIPMENT SETUP
R AUDIO L(MON
COMPONENT IN
Connecting with a RF Cable
IN1
OUT
1
2
ANT OUT
S-VIDEO
ANT IN
OUTPUT
SWITCH
VIDEO
L
R
1
Wall Jack
2
Antenna
20
1
Connect the A N T O U T socket of the VCR to the A N T E N N A I N socket on the TV.
2
Connect the antenna cable to the A N T I N socket of the VCR.
3
Press the P L A Y button on the VCR and match the appropriate channel between the TV and VCR for
viewing.
Connecting with an RCA cable
V I D E O jacks between TV and
Connect the A U D I O/V
VCR. Match the jack colours (Video = yellow, Audio Left
= white, and Audio Right = red)
2
Insert a video tape into the VCR and press PLAY on
the VCR. (Refer to the VCR owner’s manual.)
1
3
Select A V 2 input source using the I N P U T button on
the remote control.
If connected to A V I N 1 input, select A V 1 input
source.
2
! NOTE
S-VIDEO
G
If you have a mono VCR, connect the audio cable from the
VCR to the A U D I O L / M O N O jack of the TV.
VIDEO
OUTPUT
SWITCH
L
R
ANT IN
EXTERNAL EQUIPMENT SETUP
1
ANT OUT
21
EXTERNAL EQUIPMENT SETUP
AV OUTPUT SETUP
The TV has a special signal output capability which allows you
to hook up the second TV or monitor.
COMPONENT IN
VIDEO
1
R - AUDIO - L
See the Operating Manual of the second TV or monitor
for further details regarding that device’s input settings.
AV
VIDED
EXTERNAL EQUIPMENT SETUP
2
AUDIO IN
(RGB/DVI)
Connect the second TV or monitor to the TV’s AV OUT
jacks.
R-AUDIO-L(MONO)
1
IN1
OUT
1
2
! NOTE
G
G
Only Digital, Analogue, AV1, AV2 mode can be used for AV
out. Component, RGB, HDMI input sources cannot be used
for AV out.
We recommend to use the AV OUT jacks for VCR recording.
COMPONENT IN
VIDEO
22
L
R
DIGITAL AUDIO OUT SETUP
Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port.
If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL
AUDIO OUT terminal on the back of TV to a DVD Home Theater (or amp).
1
Connect one end of an optical cable to the TV Digital
Audio (Optical) Output port.
1
VIDEO
R - AUDIO - L
Set the “TV Speaker option - Off ” in the AUDIO
menu.(Gp .95). Refer to the external audio equipment
instruction manual for operation.
VIDED
3
AV
R-AUDIO-L(MONO)
Connect the other end of the optical cable to the
digital audio (optical) input on the audio equipment.
IN1
CAUTION
G Do
not look into the optical output port. Looking at the
laser beam may damage your vision.
2
OUT
1
2
EXTERNAL EQUIPMENT SETUP
2
COMPONENT IN
AUDIO IN
(RGB/DVI)
! NOTE
G
When connecting with external audio equipments, such as
amplifiers or speackers, please turn the TV speakers off.
23
EXTERNAL EQUIPMENT SETUP
OTHER A/V SOURCE SETUP
Camcorder
Video Game Set
L
R
3
EXTERNAL EQUIPMENT SETUP
VIDEO
1
2
24
1
V I D E O jacks between TV and external equipment. Match the jack colours .
Connect the A U D I O/V
(Video = yellow, Audio Left = white, and Audio Right = red)
2
Select A V 2 input source with using the I N P U T button on the remote control.
If connected to A V I N 1 input, select A V 1 input source.
3
Operate the corresponding external equipment.
Refer to external equipment operating guide.
USB SETUP
After connecting the U S B I N jacks, you use the
U S B function. (G p .57)
1
EXTERNAL EQUIPMENT SETUP
2
Connect the USB device to the U S B I N jack on
the TV.
3
1
2
25
EXTERNAL EQUIPMENT SETUP
PC SETUP
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
Connecting with a D-sub 15 pin cable
AV OUT
R
3
Turn on the PC and the TV.
4
Select R G B input source using the INPUT button on
the remote control.
26
VIDEO
IN1
1
RGB OUTPUT
T
R - AUDIO - L
Connect the PC audio output to the A U D I O I N
( R G B / D V I ) jack on the TV.
AUDIO
R
2
L
AUDIO
EXTERNAL EQUIPMENT SETUP
L/MONO
Connect the RGB output of the PC to the R G B I N
( P C ) jack on the TV.
VIDEO
VIDEO
VIDEO
AV
1
R-AUDIO-L(MONO)
AV IN 1
COMPONENT IN
AUDIO IN
(RGB/DVI)
OUT
2
AUDIO
1
2
Connecting with an HDMI to DVI cable
IN1
OUT
1
Select H D M I 1 input source using the INPUT button
on the remote control.
1
2
50/60PS8***
3
COMPONENT IN
AUDIO IN
(RGB/DVI)
2
AV
VIDEO
VIDEO
1
R - AUDIO - L
R-AUDIO-L(MONO)
COMPONENT IN
4
COMPONENT IN
VIDEO
Turn on the PC and the TV.
R - AUDIO - L
3
AV
1
VIDEO
Connect the PC audio output to the A U D I O I N
( R G B / D V I ) jack on the TV.
AUDIO IN
(RGB/DVI)
2
EXTERNAL EQUIPMENT SETUP
2
42/50PQ6***, 50PS3***
R-AUDIO-L(MONO)
Connect the DVI output of the PC to the H D M I / D V I
I N 1 jack on the TV.
COMPONENT IN
1
IN1
1
OUT
1
2
27
EXTERNAL EQUIPMENT SETUP
Supported Display Resolution
HDMI/DVI-DTV mode
RGB-PC, HDMI/DVI-PC mode
EXTERNAL EQUIPMENT SETUP
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
720x400
31.468
70.08
640x480
31.649
59.94
640x480
31.469
59.94
31.469
60
800x600
37.879
60.31
31.47
59.94
1024x768
48.363
60.00
31.50
60
1280x768
47.78
59.87
720x576
31.25
50.00
1360x768
47.72
59.80
1280x720
37.50
50.00
1280x1024
63.98
60.02
44.96
59.94
45.00
60
65.317
59.979
28.125
50.00
33.72
59.94
33.75
60
(Except for 42/50PQ6***)
1400x1050
(Except for 42/50PQ6***)
1920x1080
28
720x480
66.587
59.934
1920x1080
27.00
24.00
33.750
30
56.25
50.00
67.433
59.94
67.50
60
! NOTE
G
G
G
G
We recommend using 1024x768(42PQ6***),
1360x768, 60Hz(50PQ6***), 1920x1080,
60Hz(50PS3***, 50/60PS8***) for the PC
mode, this should provide the best picture quality.
Connect the signal cable from the monitor output port of the PC to the RGB (PC) port of the
TV or the signal cable from the HDMI output
port of the PC to the HDMI IN (or HDMI/DVI
IN) port on the TV.
G
G
G
G
G
G
G
Connect the audio cable from the PC to the
Audio input on the TV. (Audio cables are not
included with the TV).
If using a sound card, adjust PC sound as
required.
If required, adjust the settings for Plug and Play
functionality
If the graphic card on the PC does not output
analogue and digital RGB simultaneously, connect
only one of either RGB or HDMI IN (or
HDMI/DVI IN) to display the PC output on the
TV.
If the graphic card on the PC does output analogue
and digital RGB simultaneously, set the TV to either
RGB or HDMI; (the other mode is set to Plug and
Play automatically by the TV.)
DOS mode may not work depending on the video
card if you use an HDMI to DVI cable.
If you use too long an RGB-PC cable that is too
long, there may be interference on the screen.
We recommend using under 5m of cable. This
provides the best picture quality.
EXTERNAL EQUIPMENT SETUP
G
Avoid keeping a fixed image on the set’s screen
for prolonged periods of time. The fixed image
may become permanently imprinted on the
screen; use a screen saver when possible.
There may be interference relating to resolution,
vertical pattern, contrast or brightness in PC
mode. Change the PC mode to another resolution or change the refresh rate to another rate or
adjust the brightness and contrast on the menu
until the picture is clear.
If the refresh rate of the PC graphic card can not
be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.
The synchronization input waveform for
Horizontal and Vertical frequencies are separate.
29
EXTERNAL EQUIPMENT SETUP
Screen Setup for PC mode
Screen Reset
Returns Position, Size and Phase to the factory default settings.
This function works in the following mode : RGB[PC].
EXTERNAL EQUIPMENT SETUP
SCREEN
PICTURE
Move
OK
100
• Brightness
70
• Colour
70
• Tint
0
• Advanced Control
• Picture Reset
Screen
Screen
1 MENU
2
Auto Config.
50
• Sharpness
Prev.
Resolution
E
• Contrast
Move
Position
R
G
Size
To Set
Yes
No
Phase
Reset
Select P I C T U R E.
OK
Select S c r e e n.
OK
Select R e s e t.
OK
Select Y e s.
3
4
5
OK
Run R e s e t.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
30
Adjustment for screen Position, Size, Phase
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually.
This function works in the following mode : RGB[PC].
Move
Prev.
Resolution
E
• Contrast
Move
OK
100
• Brightness
50
• Sharpness
70
• Colour
70
• Tint
0
Auto Config.
Position
R
Size
G
• Advanced Control
Phase
• Picture Reset
Screen
Screen
1 MENU
Reset
EXTERNAL EQUIPMENT SETUP
SCREEN
PICTURE
Select P I C T U R E.
2
OK
3
OK
4
5
OK
Select S c r e e n.
Select P o s i t i o n, S i z e or P h a s e.
Make appropriate adjustments.
OK
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
31
EXTERNAL EQUIPMENT SETUP
Selecting Resolution
To view a normal picture, match the resolution of RGB mode and selection of PC mode.
This function works in the following mode: RGB[PC]
EXTERNAL EQUIPMENT SETUP
SCREEN
PICTURE
Move
Resolution
E
• Contrast
100
• Brightness
70
• Colour
70
• Tint
Auto Config.
50
• Sharpness
0
Move
Prev.
OK
1024 x 768
1280 x 768
1360 x 768
Position
R
G
Size
• Advanced Control
• Picture Reset
Screen
Screen
1 MENU
2
Phase
Reset
Select P I C T U R E.
OK
Select S c r e e n.
OK
Select R e s o l u t i o n.
3
4
OK
Select the desired resolution.
5
OK
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
32
Auto Configure (RGB [PC] mode only)
Automatically adjusts the picture position and minimizes image instability. After adjustment, if the image is
still not correct, your TV is functioning properly but needs further adjustment.
SCREEN
PICTURE
Move
100
• Brightness
Auto Config.
50
• Sharpness
70
• Colour
70
• Tint
0
• Advanced Control
• Picture Reset
Screen
Screen
1 MENU
Prev.
Resolution
E
• Contrast
Move
OK
Select P I C T U R E.
Position
R
G
Size
To Set
Yes
No
Phase
EXTERNAL EQUIPMENT SETUP
Auto configure
This function is for automatic adjustment of the screen position, size, and phase The displayed image will be
unstable for a few seconds while the auto configuration is in progress.
Reset
• If the position of the image is still not correct,
try Auto adjustment again.
2
• If picture needs to be adjusted again after Auto
OK
Select S c r e e n.
OK
Select A u t o C o n f i g ..
OK
Select Y e s.
adjustment in RGB (PC), you can adjust the
P o s i t i o n, S i z e or P h a s e.
3
4
5
OK
Run A u t o C o n f i g ..
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
33
WATCHING TV / PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
ENERGY Adjust the power saving mode of the TV.
SAVING
ENERGY SAVING
RATIO Selects your desired picture format.
RATIO
RA
TIO
POWER Switches the TV on from standby or off to standby.
INPUT External input mode rotate in regular sequence.
TV/RAD Selects Radio, TV and DTV channel.
WATCHING TV / PROGRAMME CONTROL
Q. MENU Select the desired quick menu source. (Aspect Ratio,
Clear Voice II, Picture Mode, Sound Mode, Audio, Sleep
Timer, Favourite, USB Device.) (G p .3 7)
MENU Selects a menu.
Clears all on-screen displays and returns to TV viewing
from any menu.
GUIDE Shows programme schedule. (G p .7 1)
THUMBSTICK Allows you to navigate the on-screen menus and adjust
(Up/Down/Left/ the system settings to your preference.
Right)
OK Accepts your selection or displays the current mode.
RETURN(EXIT) Allows the user to move return one step in an interactive application, EPG or other user interaction function.
INFO i Shows the present screen information.
Press the MENU button and then INFO button to enter
the Simple Manual menu.
AV MODE It helps you select and set images and sounds when
connecting AV devices. (G p . 5 5)
Coloured These buttons are used for teletext (on T E L E T E X T
buttons models only) , P r o g r a m m e e d i t.
1
FREEZE
1
TELETEXT These buttons are used for teletext.
BUTTONS For further details, see the ‘Teletext’ section. (G p . 1 0 8)
SUBTITLE Recalls your preferred subtitle in digital mode.
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu appears
at the screen. (G p .5 2)
34
FREEZE Pause the present picture at the screen. (It doesn’t work
at USB Mode.)
The TV Returns to normal viewing automatically if no signal is received or no operation is performed for 5 minutes.
ENERGY SAVING
VOLUME UP Adjusts the volume.
/DOWN
RATIO
RA
TIO
MARK Check and un-check programmes in the USB menu.
FAV Displays the selected favourite programme.
MUTE Switches the sound on or off.
PAGE Move from one full set of screen information to the next
UP/DOWN one.
0~9 number Selects a programme.
button Selects numbered items in a menu.
LIST Displays the programme table.
Q.VIEW Returns to the previously viewed programme.
SIMPLINK / Controls SIMPLINK or USB menu(Photo LIst and Music
USB Menu List or Movie List).
control buttons
WATCHING TV / PROGRAMME CONTROL
Programme Selects a programme.
UP/DOWN
Installing Batteries
FREEZE
■
Open the battery compartment cover on the back and install the
batteries matching correct polarity (+with +,-with -).
■
Install two 1.5V AAA batteries. Do not mix old or used batteries
with new ones.
■
Close cover.
35
WATCHING TV / PROGRAMME CONTROL
TURNING ON THE TV
- When your TV is turned on, you will be able to use its features.
1
Firstly, connect the power cord correctly and check the main power on the TV.
At this stage, the TV switches to standby mode.
2
In standby mode to turn TV on, press the INPUT or P D E button on the TV or press the POWER, INPUT, P
or NUMBER button on the remote control and the TV will switch on.
WATCHING TV / PROGRAMME CONTROL
Initializing setup
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the
M o d e S e t t i n g, A u t o T u n i n g.
Note:
a. If you close without completing the initial setting, the Initial Setting menu can be displayed again.
b. Press the RETURN button to change the current OSD to the previous OSD.
c. For those countries without confirmed DTV broadcasting standards, some DTV features might not
work, depending on the DTV broadcasting environment.
H o m e U s e” mode is the optimal setting for home environments, and is the TV's default mode.
d. "H
S t o r e D e m o" mode is the optimal setting for store environments. If a user modifies image quality
e. "S
S t o r e D e m o” mode initializes the product to the image quality set by us after a certain period
data, “S
of time.
H o m e U s e , S t o r e D e m o) can be changed by executing Mode Setting in the O P T I O N
f. The mode (H
menu.
PROGRAMME SELECTION
1
Press the P
number.
or NUMBER buttons to select a programme
VOLUME ADJUSTMENT
1
Press the
+ or - button to adjust the volume.
If you wish to switch the sound off, press the MUTE button.
You can cancel this function by pressing the MUTE,
+ , - or AV Mode button.
36
QUICK MENU
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
Q.Menu (Quick Menu) is a menu of features which users might use frequently.
F
Aspect Ratio
A u d i o : Selects the sound output.
S l e e p T i m e r : Sets the sleep timer.
F a v o u r i t e : Selects the favourite programme.
U S B D e v i c e : Selects “Eject” in order to eject USB
device.
G
16:9
1Q. MENU
2
WATCHING TV / PROGRAMME CONTROL
A s p e c t R a t i o: Selects your desired picture format.
For Zoom Setting, select 14:9, Zoom and Cinema
Zoom in Ratio Menu. After completing Zoom
Setting, the display goes back to Q.Menu.
C l e a r V o i c e I I : By differentiating the human
sound range from others, it helps users listen to
human voices better.
P i c t u r e M o d e : Selects your desired Picture
Mode.
S o u n d M o d e : It is a feature to automatically set
the sound combination which it deems the best for
the images being watched. Selects your desired
Sound Mode.
Display each menu.
Select your desired Source.
3
OK
• Press the Q . M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
37
WATCHING TV / PROGRAMME CONTROL
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
SETUP
Move
PICTURE
OK
Move
Auto Tuning
Aspect Ratio
Manual Tuning
Picture Wizard
Programme Edit
Software Update
Move
Auto Volume
Picture Mode
Diagnostics
: Off
: Off
• Level
: Vivid
Balance
• Contrast
100
Sound Mode
WATCHING TV / PROGRAMME CONTROL
Move
Audio Language
Subtitle Language
Hard of Hearing(
50
• SRS TruSurround XT : Off
• Treble
50
• Colour
70
• Bass
50
E
TIME
Set ID
Move
OK
Move
OK
Clock
Off Time
SETUP
PICTURE
AUDIO
TIME
Input Label
: Off
R
70
: English
: On
+
L
• Sharpness
OK
) : Off
Key Lock
Simple Manual
-
• Brightness
: English
SIMPLINK
3
0
: Standard
E
OPTION
OK
: Off
Clear Voice II
Energy Saving
: On
AUDIO
OK
: 16:9
OPTION
:1
INPUT
LOCK
: Off
On Time
: Off
Sleep Timer
: Off
USB
E
LOCK
Lock System
Move
OK
Move
OK
USB
Antenna
Photo List
Set Password
AV1
Music List
Block Programme
AV2
Movie List
Component1
DivX Reg. Code
Component2
Deactivation
Parental Guidance
: Off
INPUT
: Blocking Off
Input Block
RGB
HDMI1
HDMI2
E
1 MENU
2
OK
Display each menu.
Select a menu item.
3
OK
38
Move to the pop up menu.
• Press the I N F O button, you can check the S i m p l e M a n u a l Menu.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
AUTO PROGRAMME TUNING
Use this to automatically find and store all available programmes.
When you start auto programming, all previously stored service information will be deleted.
The maximum number of programmes that can be stored is 500. But the number may differ slightly depending
on broadcasting signals.
SETUP
Move
OK
SETUP
Auto Tuning
Manual Tuning
Manual Tuning
Programme Edit
Software Update
Move
OK
Programme Edit
: On
Diagnostics
Software Update
Diagnostics
: On
Check your antenna connection.
The previous channel information
will be updated during Auto
Tuning.
Automatic Numbering
Start
Close
1 MENU
Select S E T U P.
• Use NUMBER buttons to input a 4-digit pass-
O n’.
word in L o c k S y s t e m ‘O
2
• If you wish to keep on auto tuning select S t a r t
OK
Select A u t o T u n i n g.
OK
Select S t a r t.
3
WATCHING TV / PROGRAMME CONTROL
Auto Tuning
using the
button. Then, press the OK button. Otherwise select C l o s e.
• A u t o m a t i c N u m b e r i n g: Decide whether to
use the programme numbers as sent by broadcasting stations for tuning.
4
OK
Run A u t o t u n i n g.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
39
WATCHING TV / PROGRAMME CONTROL
MANUAL PROGRAMME TUNING (IN DIGITAL MODE)
Manual Tuning lets you manually add a programme to your programme list.
SETUP
Move
SETUP
OK
Auto Tuning
Auto Tuning
Manual Tuning
Manual Tuning
Programme Edit
WATCHING TV / PROGRAMME CONTROL
Software Update
Programme Edit
: On
Software Update
Diagnostics
Move
OK
F
DTV
G
Your receiver will add this
channel to your channel list.
: UHF
On CH.
21
Diagnostics
Bad
Normal
Good
Add
Close
1 MENU
Select S E T U P.
• Use NUMBER buttons to input a 4-digit pass-
O n’.
word in L o c k S y s t e m ‘O
2
Select M a n u a l T u n i n g.
OK
3
Select D T V.
OK
4
Select the desired channel number.
5
OK
Select update or add if signal present.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
40
MANUAL PROGRAMME TUNING (IN ANALOGUE MODE)
Manual Tuning lets you manually tune and arrange the stations in whatever order you desire.
SETUP
Move
SETUP
OK
Move
Auto Tuning
Auto Tuning
Manual Tuning
Manual Tuning
Programme Edit
Programme Edit
: On
Software Update
Diagnostics
TV
F
G
Storage
Diagnostics
1
: On
Syetem
BG
Band
V/UHF
Channel
0
Search
F G
Name
C 01
Store
Close
1 MENU
6
Select S E T U P.
Select V / U H F or C a b l e.
7
2
OK
or
Select M a n u a l T u n i n g.
1
2
3
4
5
6
7
8
9
Select the desired
channel number.
0
8
3
OK
Select T V.
Commence searching.
9
4
or
1
2
3
4
5
6
8
9
7
OK
Select the desired programme number on.
WATCHING TV / PROGRAMME CONTROL
Software Update
OK
Select S t o r e.
0
5
Select a TV system.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
O n’.
• Use NUMBER buttons to input a 4-digit password in L o c k S y s t e m ‘O
• B G : PAL B/G (Europe / East Europe / Asia / New Zealand / M.East / Africa / Singapore)
I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa)
D K : PAL D/K (East Europe / China / Africa / CIS)
B / B : Australia
• To store another channel, repeat steps 4 to 9.
41
WATCHING TV / PROGRAMME CONTROL
SETUP
Move
OK
SETUP
Auto Tuning
Auto Tuning
Manual Tuning
Manual Tuning
Programme Edit
Programme Edit
Software Update
: On
Diagnostics
Software Update
Move
OK
F
TV
G
Storage
: On
System
BG
Band
V/UHF
Diagnostics
1
Channel
0
Search
F G
Name
C 01
Store
WATCHING TV / PROGRAMME CONTROL
Close
A
Assigning a station name
You can assign a station name with five characters to each programme number.
1 MENU
Select S E T U P.
2
5
OK
Select M a n u a l T u n i n g.
OK
6
3
Select the position and make
your choice of the second character, and so on.
You can use an the alphabet A
to Z , the number 0 to 9 , +/ -,
and blank.
OK
Select C l o s e.
OK
Select S t o r e.
Select T V.
OK
7
4
OK
Select N a m e.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
42
PROGRAMME EDIT
When a programme number is skipped, it means that you will be unable to select it using P
viewing.
button during TV
If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or
select it in the Programme edit menu.
This function enables you to skip the stored programmes.
You can change the programme number using “Move”function, if “Automatic Numbering” is unchecked when you
start Auto Tuning.
SETUP
Move
DTV
The HITS
OK
Auto Tuning
801 TMF
802 UKTV Br’tldeas
803 ftn
804 Ideal World
Manual Tuning
Programme Edit
Edit
Programme
Software Update
RADIO
800 The HITS
: On
TV
805 4TVinteractive
806 ITV Play
807 Film4
808 E4+1
809 Sky News
810 Sky Spts News 811 Sky THREE
Diagnostics
812 Sky Text
813 tvtv DIGITAL
814 Dave
815 smileTV
E
Pr. Change
Navigation
P
Page Change
Previous
Skip
1 MENU
Select S E T U P.
• Use NUMBER buttons to input a 4-digit pass-
WATCHING TV / PROGRAMME CONTROL
800
O n’.
word in L o c k S y s t e m ‘O
2
OK
Select P r o g r a m m e E d i t.
3
OK
4
Enter the P r o g r a m m e E d i t.
Select a programme to be
stored or skipped.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
43
WATCHING TV / PROGRAMME CONTROL
IN DTV/RADIO MODE
A
Skipping a programme number
1
• When programmes are to be skipped, the
skipped programme shows in blue and these
programmes will not be selected by the P
buttons during TV viewing.
Select a programme number to be skipped.
2
BLUE Turn the programme number to blue.
3
• If you wish to select a skipped programme, directly
enter the programme number with the NUMBER buttons or select it in the programme edit or EPG.
BLUE Release.
WATCHING TV / PROGRAMME CONTROL
IN TV MODE
This function enables you to delete or skip the stored programmes.
You can also move some channels and use other programme numbers.
A
Deleting a programme
1
Select a programme number to be deleted.
2
RED Turn the programme number to red.
RED Delete. BLUE Release.
• The selected programme is deleted, all the fol-
lowing programmes are shifted up one
Moving a programme
A
3
1
Select a programme number to be moved.
2
GREEN
A
GREEN Release.
Turn the programme number to green.
Skipping a programme number
1
Select a programme number to be skipped.
2
BLUE Turn the programme number to blue.
3
BLUE Release.
44
3
• When a programme number is skipped it means
that you will be unable to select it using the P
button during normal TV viewing.
• If you wish to select a skipped programme, directly
enter the programme number with the NUMBER buttons or select it in the programme edit or EPG.
SOFTWARE UPDATE
Software Update means software can be downloaded through the digital terrestrial broadcasting system.
SETUP
Move
SETUP
OK
Auto Tuning
Manual Tuning
Manual Tuning
Software Update
On
:: On
Software Update
Diagnostics
Diagnostics
4
OK
Save.
* When setting “Software Update”
Occasionally, a transmission of
updated digital software information will result in the following
menu on the TV screen.
Software update is available.
Would you like to download now?
(approximately 30 Min ~ 2 hours)
Your TV software is updated when you turn off the TV
using the remote control or local key.
Do not unplug!
Yes
No
Simple Update :for current
update stream
The new software is updated at the time below.
00/00/0 00:00
Would you like to download now?
Yes
Select the Y e s using the
button and you will see the following picture.
After the Software Update is
complete, the System restarts.
Software downloading progress.
Ver. ff.ff.ff.ff.
G
Ver. 0.0.00.01
27%
Hide
i
New Software is successfully installed.
WATCHING TV / PROGRAMME CONTROL
OK
Select S o f t w a r e U p d a t e.
OK
Off
On
:: On
On
On
Select O n or O f f.
• If you select O n, a user confirm message box will be displayed to notify that new software is found.
3
Select S E T U P.
2
OK
Programme Edit
Programme Edit
1 MENU
Move
Auto Tuning
Stop
When the power is turned off, downloading
starts.
When the power is turned on while updating, the progress status is displayed.
No
Schedule Update : for scheduled
update stream
When the Software Update
O f f", the message to
menu is "O
O n" appears.
change it to "O
- During Progress of a Software Update, please note the following:
• Power to the TV must not be interrupted.
• The TV must not be switched off.
• The antenna must not be disconnected.
• After Software Update, you can confirm the updated software version in Diagnostics menu.
• It may take hours to download the software, so make sure that the power stays on during the download.
45
WATCHING TV / PROGRAMME CONTROL
DIAGNOSTICS
This function enables you to view information on the Manufacturer, Model/Type and Software Version.
This displays the information and signal strength of the tuned *MUX.
This displays the signal information and service name of the selected MUX.
(*MUX: A higher directory of channels in digital broadcasting (a single MUX contains multiple channels.))
Engineering Diagnostics
SETUP
Move
Manufacturer : LG Electronics Inc.
Model/Type : 42PQ60D
Software Version : V1.01.00
OK
Auto Tuning
WATCHING TV / PROGRAMME CONTROL
Manual Tuning
CH 30
CH 31
Programme Edit
Software Update
: On
Diagnostics
Prev.
1 MENU
Exit
Select D i a g n o s t i c s.
OK
OK
MENU
Select S E T U P.
2
3
Popup
Display Manufacturer, Model/Type and Software Version.
4
OK
Display the information of Channel.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
46
SELECTING THE PROGRAMME LIST
You can check which programmes are stored in the memory by displaying the programme list.
Mini Glossary
Programme List
Displayed when the
Locked Programme.
801 TMF
802 UKTV Br’tldeas
803 ftn
Displaying programme LIST
A
1
Display the Programme List.
LIST
A
have been set up to be skipped by auto programming or in the programme edit mode.
• Some programmes with the channel number
shown in the programme LIST indicate there is
no station name assigned.
Selecting a programme in the programme list
1
2
A
• You may find some blue programmes. These
WATCHING TV / PROGRAMME CONTROL
Exit
Select a programme.
OK
TV/RAD
The mode will be switched between
TV, DTV, and Radio from the program
you are currently watching.
Switch to the chosen programme number.
Paging through a programme list
1
P
P
A
G
E
Turn the pages.
2
LIST
Return to normal TV viewing.
47
WATCHING TV / PROGRAMME CONTROL
FAVOURITE PROGRAMME SETUP
A
Selecting favourite programme
Favorite programmes is a convenient feature that lets you quickly scan up to programmes of your choice without
having to wait for the TV to scan through all the in-between programmes.
To tune to a favorite programme, press the F A V(Favorite)button repeatedly.
F
G
Favourite
WATCHING TV / PROGRAMME CONTROL
Favourite
1
P
or
1
2
3
4
5
6
7
8
9
0
2Q. MENU
3
Select your desired
programme.
4Q. MENU
Select F a v o u r i t e.
Select F a v o u r i t e .
Return to TV viewing.
• This will automatically include the selected programme into your favourite programme list.
A
Displaying the favourite programme list
Favourite List
1 MARK
801 TMF
FAV
802 UKTV Br’tldeas
803 ftn
Exit
48
Display the Favourite Programme List.
INPUT LIST
HDMI and AV1, 2 can be recognized by a detect pin and thus enabled only when an external device approves voltage.
By using T V / R A D button, you can move from External Input to RF Input and to the last watched programme in DTV/RADIO/TV
mode.
AV1
AV2
Component1
Component2
HDMI4
HDMI3
HDMI2
HDMI1
RGB
(Only 50/60PS8***)
1
OK
INPUT
Select the input source.
• You can also adjust INPUT menu.
INPUT
Move
Antenna
AV1
AV2
OK
• A n t e n n a : Select it when watching the DTV/TV.
• A V : Select it when watching the VCR or external
equipment.
• C o m p o n e n t : Select it when using the DVD or the
Digital set-top box depends on connector.
• R G B :Select it when using PC depends on connector.
• H D M I : Select it when using DVD, PC or Digital
set-top box depend on connector.
WATCHING TV / PROGRAMME CONTROL
Antenna
Component1
Component2
RGB
HDMI1
HDMI2
E
49
WATCHING TV / PROGRAMME CONTROL
INPUT LABEL
Selects a label for each input source.
OPTION
Move
OK
AV1
OPTION
Move
Audio Language
: English
Audio Language
: English
Subtitle Language
: English
Subtitle Language
: English
Hard of Hearing(
) : Off
Hard of Hearing(
) : Off
G
Component1
Component2
RGB
WATCHING TV / PROGRAMME CONTROL
Input Label
Input Label
SIMPLINK
: On
SIMPLINK
: On
HDMI1
Key Lock
Simple Manual
: Off
Key Lock
Simple Manual
: Off
HDMI2
Set ID
:1
Set ID
:1
E
F
OK
AV2
HDMI3
E
(Only 50/60PS8***)
HDMI4
Close
1 MENU
Select OPTION.
2
OK
Select Input Label.
OK
Select the source.
3
4
Select the label.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
50
SIMPLE MANUAL
You can easily and effectively access the TV information by viewing a simple manual on the TV.
During the Simple Manual operation, audio will be muted.
OPTION
Move
Audio Language
Subtitle Language
: English
WATCHING TV / PROGRAMME CONTROL
Hard of Hearing(
OK
: English
) : Off
Input Label
SIMPLINK
: On
Key Lock
Simple
Simple Manual
Manual
: Off
Set ID
:1
E
1 MENU
Select OPTION.
2
OK
Select Simple Manual.
OK
Select the part of the manual you want to see.
3
• Press the R E T U R N button to return to normal TV viewing.
51
WATCHING TV / PROGRAMME CONTROL
This function operates only with devices with the SIMPLINK logo.
Please check the SIMPLINK logo.
This TV might not function properly when using it with other products with HDMI-CEC function.
This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings.
O f f”.
If you do not want SIMPLINK menu,select “O
WATCHING TV / PROGRAMME CONTROL
OPTION
Move
Audio Language
Subtitle Language
Hard of Hearing(
OPTION
Move
Audio Language
: English
Subtitle Language
) : Off
Input Label
Hard of Hearing(
OK
: English
: English
) : Off
Input Label
SIMPLINK
SIMPLINK
On
:: On
SIMPLINK
SIMPLINK
Key Lock
Simple Manual
: Off
Key Lock
Simple Manual
:1
Set ID
Set ID
E
1 MENU
OK
: English
:: On
On
: Off
Off
On
On
:1
E
Select O P T I O N.
2
OK
Select S I M P L I N K.
OK
Select O n or O f f.
3
4
OK
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
52
Connecting to Home Theater with the SIMPLINK logo.
42/50PQ6***, 50PS3***
AV
2
R-AUDIO-L(MONO)
Connect the Digital Audio output terminal on the back
of the TV and the Digital Audio input terminal of the
Home Theater using optical cables.
VIDEO
IN
2
1
/DVI IN
IN1
1
1
2
2
When you select or operate a media device with home theater function, the speaker automatically switches to home theater speaker
(HT speaker).
Home Theater
50/60PS8***
! NOTE
COMPONENT IN
AV
3
2
VIDEO
VIDEO
1
/DVI IN
R - AUDIO - L
Connect the HDMI/DVI IN or HDMI IN terminal of the TV to
the rear terminal (HDMI terminal) of the SIMPLINK device with
the HDMI cable.
G When you switch the Input source using the INPUT button on
the remote control, you can stop the operation of a device controlled by SIMPLINK.
G
AUDIO IN
(RGB/DVI)
IN
R-AUDIO-L(MONO)
G
Select Home Theater in the Speaker menu by pushing
the S I M P L I N K button.
OUT
IN1
1
OUT
1
2
WATCHING TV / PROGRAMME CONTROL
3
COMPONENT IN
AUDIO IN
(RGB/DVI)
VIDEO
Connect the H D M I / D V I I N 1, H D M I I N 2 , H D M I I N 3 or
H D M I I N 4 (Only 50/60PS8***) terminal on the back of the
TV and the HDMI output terminal of the Home Theater using
HDMI cables.
R - AUDIO - L
1
2
Home Theater
53
WATCHING TV / PROGRAMME CONTROL
SIMPLINK Functions
SIMPLINK Menu
button and then OK button to select the desired SIMPLINK source.
1
T V v i e w i n g : Switch to the previous TV programme
regardless of the current mode.
2
D I S C p l a y b a c k : Select and play connected discs.
When multiple discs are available, the titles of discs are
conveniently displayed at the bottom of the screen.
1
2
E
Press the
E
WATCHING TV / PROGRAMME CONTROL
Disc playback
Control connected AV devices by pressing the
, OK, G, A, l l, FF and GG buttons.
Direct Play
After connecting AV devices to the TV, you can directly control the devices and play media without additional settings.
Select AV device
Enables you to select one of the AV devices connected to the TV and operate it.
Power off all devices
When you switch off the TV, all connected devices are turned off.
Switch audio-out
Offers an easy way to switch audio-out.
Sync Power on
When the equipment with Simplink function connected HDMI terminal starts to play, The TV will change automatically to turn
on mode.
* A device, which is connected to the TV through an HDMI cable but does not support SIMPLINK, does not provide this function.
Note: To operate SIMPLINK, an HDMI cable over Version 1.3 with *CEC function should be used. (*CEC: Consumer Electronics
Control).
Selected Device
When device is not connected (displayed in gray)
3
5
E
H D D R e c o r d i n g s p l a y b a c k : Play and control
recordings stored in HDD.
4
E
5
Audio Out to Home theater/Audio Out to TV:
Select Home theater or TV speaker for Audio Out.
• Home theater: Only one supported at a time
• DVD, Recorder: Up to three supported at a time.
• VCR: Only one supported at a time
54
When a device is connected
(displayed in bright colour)
E
4
V C R p l a y b a c k : Play and control the connected
VCR.
E
3
Change Device
OK
AV MODE
You can select the optimal images and sounds when connecting AV devices to external input.
Off
Cinema
Sport
Game
Off
Cinema
Game
Sport
WATCHING TV / PROGRAMME CONTROL
1AV MODE
Disables the AV MODE.
Optimizes video and audio for watching movies.
Optimizes video and audio for watching sports events.
Optimizes video and audio for playing games.
Press the AV MODE button repeatedly to select the desired source.
2
OK
• If you select C i n e m a in AV mode, C i n e m a will be selected both for
P i c t u r e M o d e and S o u n d M o d e in P I C T U R E menu and A U D I O
menu respectively.
O f f” in AV mode, the picture and image which you ini• If you select “O
tially set will be selected.
55
WATCHING TV / PROGRAMME CONTROL
INITIALIZING
(RESET TO ORIGINAL FACTORY SETTINGS)
This function initializes all settings.
D a y and
N i g h t of the P i c t u r e M o d e cannot be initialized.
But the settings of
It is useful to initialize the product or when you move to other city or country.
When the Factory Reset is completed, you must restart the Initializing setup.
O n", the message to enter the password appears.
When the L o c k S y s t e m menu is "O
Move
OK
OPTION
E
SIMPLINK
: On
SIMPLINK
: On
Key Lock
: Off
Key Lock
: Off
Set ID
:1
Set ID
ISM Method
: Normal
ISM Method
Demo Mode
: On
Demo Mode
Mode Setting
: Store Demo
Factory Reset
Factory
Reset
2
OK
OK
Simple Manual
Simple Manual
1 MENU
Move
E
WATCHING TV / PROGRAMME CONTROL
OPTION
Select O P T I O N.
Mode Setting
Factory
FactoryReset
Reset
: 1 settings and channel
All user
settings
will be reset. Still
: Normal
Continue?
: On
: Store Demo
Yes
No
O n", if you forget your password,
• In L o c k S y s t e m "O
press '7', '7', '7', '7' on the remote control handset.
Select F a c t o r y R e s e t.
3
OK
Select Y e s.
OK
Start Factory Reset.
4
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
56
TO USE A USB DEVICE
When connecting a USB device
When you connect a USB device, this pop up menu is displayed, automatically.
“POP UP MENU” will not be displayed while the OSD including Menu, EPG or Schedule list is activated.
When the Pop Up menu does not appear, you can select Music List, Photo List or Movie List in the USB
menu.
In USB device, you can not add a new folder or delete the existing folder.
1 Connect the USB device to the U S B
I N jack
3
on the TV.
• Only photo(JPEG), music (MP3) and movie(DAT, MPG, MPEG, VOB,
AVI, DIVX, MP4, MKV, TS, TRP, TP) are supported.
When removing the USB device
USB memory stick
Select the USB Device menu before removing the
USB device.
2
Select P H O T O L I S T, M U S I C L I S T or
MOVIE LIST
1Q. MENU
Select Eject.
PHOTO LIST
MUSIC LIST
MOVIE LIST
OK
OK
Precautions when using the USB device
Only a USB storage device is recognizable.
If the USB storage device is connected through a USB hub, the device is not recognizable.
G A USB storage device using an automatic recognition programme may not be recognized.
G A USB storage device which uses its own driver may not be recognized.
G The recognition speed of a USB storage device may depend on each device.
G Please do not turn off the TV or unplug the USB device when the connected USB storage device is working. When such
device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged.
G Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may
cause the product to malfunction or fail to be played. Never forget to use only a USB storage device which has
normal music files, image files or movie files.
G Please use only a USB storage device which was formatted as a FAT32 file system, NTFS file system provided with
the Windows operating system. In case of a storage device formatted as a different utility programme which is
not supported by Windows, it may not be recognized.
G Please connect power to a USB storage device(over 0.5A) which requires an external power supply. If not, the
device may not be recognized.
G Please connect a USB storage device with the cable offered by the device maker. If you use a cable which is not
offered by the device maker or an excessively long cable (max 5m), the device may not be recognized.
G Some USB storage devices may not be supported or operated smoothly.
G File alignment method of USB storage device is similar to Window XP and filename can recognize up to 100 English characters.
G Be sure to back up important files since data stored in a USB memory device may be damaged. We will not be
responsible for any data loss.
G If the USB HDD does not have an external power source, the USB device may not be detected. So be sure to
connect the external power source.
- Please use a power adaptor for an external power source. We do not guarantee an USB cable for an external
power source.
G Data in a USB storage device cannot be deleted in the NTFS file system.
G If your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can use up to 4
partitions or USB memory devices.
G Only the FAT32 file system supports the delete function.
G If a USB memory device is connected to a USB multi-card reader, its volume data may not be detected.
G If the USB memory device does not work properly, disconnect and reconnect it.
G How fast a USB memory device is detected differs from device to device.
G If the USB is connected in Standby Mode, specific hard disk will automatically be loaded when the TV is turned on.
G The recommended capacity is 1TB or less for a USB external hard disk and 32GB or less for USB memory.
G Any device with more than the recommended capacity may not work properly.
G If a USB external hard disk with a "Energy Saving" function does not work, turn the hard disk off and on again to
make it work properly.
G USB storage devices below USB 2.0 are supported as well. But they may not work properly in the movie list.
G
G
TO USE A USB DEVICE
2
3
57
TO USE A USB DEVICE
! NOTE
■
Image shown may differ from your TV.
G In order to avoid losing the USB memory stick, use
the USB connector(sold separately) to fix the USB
memory stick to the USB connector holder of the TV.
USB connector holder
USB Input
Port
USB Connector (sold separately)
- Fix the one end of the USB connector to
the USB memory stick and the other end
to the USB connector holder.
PHOTO LIST
TO USE A USB DEVICE
You can view photo files on USB storage device.
The On Screen Display may be different from your TV. Images are an example to assist with the TV operation.
When you are watching the photo by the Photo List function, you can not change the picture mode.
PHOTO(*.JPEG) supporting file
Baseline : 64 x 64 ~ 15360 x 8640
Progressive : 64 x 64 ~ 1920 x 1440
• You can play JPEG files only.
• Non-supported files are displayed in the form of predefined icon.
Screen Components
1 MENU
2
OK
Select U S B.
Select Photo List.
OK
2
1
Moves to upper level folder
2
Current page/Total pages
3
Total number of marked photos
4
Photo List
Page 2/3
Drive1
JMJ001
Corresponding buttons on the
remote control
Up Folder
Navigation
58
No Marked
Up Folder
1366x768, 125KB
1
3
Popup Menu
4
KY103
09/10/2008
KY101
09/10/2008
KY104
09/10/2008
KY102
09/10/2008
KY105
09/10/2008
JMJ001
09/10/2008
JMJ005
09/10/2008
JMJ002
09/10/2008
JMJ006
09/10/2008
JMJ003
09/10/2008
JMJ007
09/10/2008
JMJ004
09/10/2008
JMJ008
09/10/2008
Page Change
MARK
Mark
Exit
Photo Selection and PopUp Menu
Photo List
Page 2/3
Drive1
No Marked
Up Folder
KR103
09/10/2008
KR101
09/10/2008
KR104
09/10/2008
KR102
09/10/2008
KR105
09/10/2008
JMJ001
09/10/2008
JMJ005
09/10/2008
JMJ002
09/10/2008
JMJ006
09/10/2008
JMJ003
09/10/2008
JMJ007
09/10/2008
JMJ004
09/10/2008
JMJ008
09/10/2008
JMJ001
1366x768, 125KB
Up Folder
Navigation
Popup Menu
Page 2/3
Drive1
MARK
JMJ001
KR101
Up Folder
Navigation
1
Popup Menu
Exit
No Marked
Up Folder
1366x768, 125KB
Mark
09/10/2008
KR103
09/10/2008
KR104
09/10/2008
1366x768, 125KB
KR102
09/10/2008
KR105
09/10/2008
JMJ001
View
09/10/2008
JMJ005
09/10/2008
JMJ002
09/10/2008
JMJ006
09/10/2008
JMJ003
09/10/2008
JMJ007
09/10/2008
JMJ004
09/10/2008
JMJ008
09/10/2008
Mark All
Delete
Close
Page Change
MARK
Mark
Exit
G
View : Display the selected item.
Mark All : Mark all photos on the screen.
G Unmark All : Deselect all marked photos.
G D e l e t e or Delete Marked(FAT32 file system only)
: Delete the selected photo item.
G C l o s e : Close the pop-up menu.
G
TO USE A USB DEVICE
Photo List
Page Change
Select the target folder or drive.
• Use the P
2
3
4
Select the desired photos.
OK
OK
Show the PopUp menu.
OK
Select the desired PopUp menu.
button to navigation in the
photo page.
• Use the M A R K button to mark or unmark a
photo. When one or more photos are marked,
you can view each marked photo or a slide
show of the marked photos. If no photos are
marked, you can view every individual photo in
the folder or a slide show of all photos in the
folder.
• Press the R E T U R N button to return to normal TV viewing.
59
TO USE A USB DEVICE
How to view photo
Detailed operations are available on full-sized photo view screen.
Photo List
Page 2/3
Drive1
No Marked
Up Folder
KR103
09/10/2008
KR101
09/10/2008
KR104
09/10/2008
KR102
09/10/2008
KR105
09/10/2008
JMJ001
09/10/2008
JMJ005
09/10/2008
JMJ002
09/10/2008
JMJ006
09/10/2008
JMJ003
09/10/2008
JMJ007
09/10/2008
JMJ004
09/10/2008
JMJ008
09/10/2008
JMJ001
1366x768, 125KB
Up Folder
Navigation
Popup Menu
TO USE A USB DEVICE
Photo List
Page 2/3
Drive1
Page Change
MARK
JMJ001
KR101
Up Folder
Navigation
1
Popup Menu
Exit
No Marked
Up Folder
1366x768, 125KB
Mark
09/10/2008
KR103
09/10/2008
KR104
09/10/2008
1366x768, 125KB
KR102
09/10/2008
KR105
09/10/2008
JMJ001
View
09/10/2008
JMJ005
09/10/2008
JMJ002
09/10/2008
JMJ006
09/10/2008
JMJ003
09/10/2008
JMJ007
09/10/2008
JMJ004
09/10/2008
JMJ008
09/10/2008
Mark All
Delete
Close
Page Change
MARK
Mark
Select the target folder or drive.
Exit
1/17
Slideshow
3
OK
OK
4
5
60
Select the desired photos.
Show the PopUp menu.
Select V i e w.
OK
The selected photo is displayed in
full size.
Delete
Option
Hide
The aspect ratio of a photo may change the size of the photo displayed on the screen in full size.
Press the R E T U R N button to move to the previous menu screen.
• Use the P
photo page.
2
BGM
button to navigation in the
6
OK
Select the Slideshow , B G M,
D e l e t e , Option or H i d e.
(Rotate),
• Use
1/17
Slideshow
BGM
Delete
Option
Hide
button to select the previous or
next photo.
• Use
button to select and control the
menu on the full-sized screen.
S l i d e s h o w : When no picture is selected, all photos in the current
folder are displayed during slide show. If some photos are selected,
those photos are displayed in a slide show.
■ Set the time interval of the slide show in O p t i o n.
G
B G M (Background Music) : Listen to music while viewing photos in
full size.
■ Set the Music Folder for BGM in Options before using this function.
G
TO USE A USB DEVICE
G
( R o t a t e ) : Rotate photos.
Rotates the photo 90°, 180°, 270°, 360° clockwise.
■ It can not be rotate when the width of a picture is bigger than
supported height.
■
G
D e l e t e (FAT32 file system only) : Delete photos.
G
O p t i o n : Set values for S l i d e S p e e d and M u s i c F o l d e r for
B G M.
■ Use
button and O K button to set values. Then go to
OK
O
and press K to save the settings.
■ You cannot change M u s i c F o l d e r while BGM is playing.
Press F G to set the time interval between slides.
Slide Speed
Fast
Music Folder
Music
OK
G
Cancel
H i d e : Hide the menu on the full-sized screen.
■ To see the menu again on the full-sized screen, press O K button
to display.
61
TO USE A USB DEVICE
MUSIC LIST
You can play music files on USB storage device.
Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by this model.
Music file on your USB device can be played by this unit.
The On Screen Display may be different from your TV. Images are an example to assist with the TV operation.
MUSIC (*.MP3) supporting file
Bit rate 32 ~ 320
• Sampling rate MPEG1 Layer3 : 32kHz, 44.1kHz, 48kHz
• Sampling rate MPEG2 Layer3 : 16kHz, 22.05kHz, 24kHz
• Sampling rate MPEG2.5 Layer3 : 8kHz, 11.025kHz, 12kHz
TO USE A USB DEVICE
Screen Components
1 MENU
2
OK
Select U S B.
Select Music List.
OK
3
1
2
Preview: If any album jacket
for the file(Album Art Image)
exists, this jacket is displayed.
Moves to upper level folder
Music List
1
4
Page 2/3
No Marked
Music
Title
Duration
Up Folder
3
Current page/Total pages
4
Total number of marked music
title
01:34
00:00/01:34
5
Corresponding buttons on
the remote control
2
03:23
Up Folder
Navigation
04:28
Popup Menu
5
62
Page Change
MARK
Mark
Exit
Music Selection and PopUp Menu
As shown, up to 6 music titles are listed per page.
Music List
Music
Duration
Title
Up Folder
01:34
00:00/01:34
03:23
Up Folder
Navigation
04:28
Popup Menu
Page Change
MARK
Mark
Exit
No Marked
Page 2/3
Music
Title
4395KB
1Kbps
Up Folder
Play
Play with Photo
Mark All
Delete
Close
00:00/01:34
04:28
Up Folder
Navigation
1
2
3
4
Popup Menu
Page Change
MARK
Mark
Select the target folder or drive.
Select the desired music title
OK
OK
Show the PopUp menu.
OK
Exit
TO USE A USB DEVICE
Music List
P l a y (During stop) : Play the selected music
titles.
One playback of a piece of music finishes, the
next selected one will be played. When there
are no selected music titles to play, the next
one in the current folder will be played. If you
go to a different folder and press the O K button, the current music in playback will stop.
G P l a y M a r k e d : Play the selected music titles.
Once a music finishes playing, the next selected one will be played automatically.
G S t o p P l a y (During playback) : Stop the playing music titles.
G P l a y w i t h P h o t o : Start playing the selected
music titles and then move to the Photo List.
G M a r k A l l : Mark all music titles in the folder.
G U n m a r k A l l : Deselect all marked music titles.
G D e l e t e or Delete Marked(FAT32 file system only)
: Delete the selected music titles.
G C l o s e : Close the pop-up menu.
G
No Marked
Page 2/3
• Use the P
button to navigate up/down
in the music page.
• Use M A R K button to mark or unmark a music.
When one or more music files are marked, the
marked music title will be played in sequence.
For example, if you want to listen to only one
music repeatedly, just mark the music only and
play it. If no music is marked, all the music in
the folder will be played in sequence.
Select the desired PopUp menu.
• Press the R E T U R N button to return to normal TV viewing.
63
TO USE A USB DEVICE
■
If you don't press any button for a while during the playing, the play information box (as shown in the below) will
float as a screen saver.
■
The ‘Screen Saver’?
Screen saver is to prevent screen pixel damage due to an
fixed image remaining on the screen for a extended period
of time.
! NOTE
TO USE A USB DEVICE
64
When a music file is played,
is displayed behind the title.
G A damaged or corrupted music does not play but displays 00:00 in playtime.
G A music downloaded from a paid service with copyright protection does not start but displays inappropriate information in playtime.
G If you press O K, A buttons, screen saver is stopped.
G The P L A Y ( G) , P a u s e ( I I ) , A, GG, FF buttons on the remote control are also available in this mode.
G You can use the GG button to select the next music and the FF button to select the previous music.
G
MOVIE LIST
You can play movie files on a USB storage device.
The movie list is activated once USB is detected. It is used when playing movie files on TV.
Displays the movies in the USB folder and supports Play.
Allows playback of all movies in the folder and user desired files.
It is a movie list that displays folder information and movie file.
The On Screen Display may be different from your TV. Images are an example to assist with the TV operation.
TO USE A USB DEVICE
Movie(*.dat/*.mpg/*.mpeg/*.ts/*.trp/*.tp/*.vob/*.mkv/*.mp4/*.avi/*.divx) supporting file
Video format :DivX3.11, DivX4.12, DivX5.x, DivX6, Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid 1.10beta-1/beta-2, Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC
Audio format : AC3(Dolby Digital), AAC, Mpeg, MP3, LPCM, HEAAC
Bit rate : within 32 ~ 320kbps(MP3)
Subtitle format : *.smi/*.srt/*.sub(MicroDVD, SubViewer1.0/2.0)/*.ass/*.ssa/*.txt(TMPlayer)/*.psb(PowerDivx)
• Some user-created subtitles may not work properly.
• Some special characters are not supported in subtitles.
• HTML tags are not supported in subtitles.
• Subtitles in languages other than the supported languages are not available.
• Time information in an external subtitle file should be arranged in ascending order to be played.
• The screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the audio language is changed.
• A damaged movie file may not be played correctly, or some player functions may not be usable.
• Movie files produced with some encoders may not be played correctly.
• If the video and audio structure of recorded file is not interleaved, either video or audio is outputted.
• HD videos with a maximum of 1920x1080@25/30P or 1280x720@50/60P are supported, depending on the frame.
• Videos with resolutions higher than 1920X1080@25/30P or 1280x720@50/60P may not work properly
depending on the frame.
• Movie files other than the specified types and formats may not work properly.
• Max bitrate of playable movie file is 20Mbps.
• We do not guarantee smooth playback of profiles encoded level 4.1 or higher in H.264.
• DTS Audio codec is not supported.
• A movie file more than 30GB in file size is not supported for playback.
• A DivX movie file and its subtitle file must be located in the same folder.
• A video file name and its subtitle file name must be identical for it to be displayed.
• Playing a video via a USB connection that doesn’t support high speed may not work properly.
• USB storage devices below USB 2.0 are supported as well. But they may not work properly in the movie list.
• Files encoded with GMC(Global Motion Compensation) may not be played.
• Only the files saved in ASCII CODE is supported for the external subtitles of the movie.
• Only 500 alphabets and 500 numbers are supported for each line of the subtitle.
• Only 10,000 of sync blocks can be supported within the subtitle file.
• When you are watching the movie by Movie List function, you can adjust an image by E n e r g y S a v i n g and
A V M o d e key on the remote control. User setup for each image mode does not operate.
65
TO USE A USB DEVICE
File
Extension name
mpg, mpeg, vob
Video Decoder
Audio Codec
Resolution
MPEG1, MPEG2
AC3,MPEG,MP3,LPCM
dat
MPEG1
AC3,MPEG,MP3,LPCM
ts,trp,tp
MPEG2, H.264/AVC
AC3,AAC,MPEG
mp4
MPEG4 SP, MPEG4 ASP, Divx 3.11, Dvix 4.12, Dvix 5.x
AC3,HEAAC,
AAC,MPEG,MP3,LPCM
Dvix 6, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03
Xvid 1.10–beta 1, Xvid 1.10-beta 2, H.264/AVC
avi
MPEG 2, MPEG 4 SP, MPEG4 ASP, Divx 3.11, Divx 4, Divx 5, Divx 6
AC3,HEAAC,AAC,MPEG,
Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10–beta 1
1920x1080@30p
MP3,LPCM
Xvid 1.10–beta 2, H.264/AVC
mkv
MPEG 1, MPEG 2, MPEG 4 SP , MPEG4 ASP, H.264/AVC
divx
MPEG 2, MPEG 4 SP, MPEG4 ASP, Divx 3.11, Divx 4, Divx 5, Divx 6
AC3,HEAAC,AAC,MPEG,MP3,LPCM
AC3,HEAAC,AAC,MPEG,
Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10–beta 1
TO USE A USB DEVICE
MP3,LPCM
Xvid 1.10–beta 2, H.264/AVC
Screen Components
1 MENU
2
Select U S B.
OK
OK
2
1
Moves to upper level folder
2
Current page/Total pages
3
Total number of marked movie
title
4
Movie List
Select Movie List.
3
Page 2/3
No Marked
movie
Title
Duration
Up Folder
Corresponding buttons on
the remote control
640x480, 720KB
1
Up Folder
Navigation
Popup Menu
4
66
Page Change
MARK
Mark
Exit
Movie Selection and PopUp Menu
Movie List
No Marked
Page 2/3
movie
Duration
Title
Up Folder
1:340, 120KB
Up Folder
Navigation
Popup Menu
Movie List
Page Change
MARK
Mark
Exit
No Marked
Page 2/3
movie
Play
Mark All
Delete
Close
Up Folder
Navigation
1
2
Popup Menu
Page Change
MARK
Mark
Select the target folder or drive.
Select the desired movie title
OK
3
OK
Exit
TO USE A USB DEVICE
1366x768, 125KB
1:340, 120KB
Play : Play the selected movie.
Divx Play is executed while screen changes.
G M a r k A l l : Mark all Movie in the folder.
G U n m a r k A l l : Deselect all marked movies.
G D e l e t e or Delete Marked(FAT32 file system only)
: Delete the selected Movie item.
G C l o s e : Close the pop-up menu.
G
Duration
Title
Up Folder
• Use the P
button to navigation in the
movie page.
• Use M A R K button to mark or unmark a movie.
When one or more movie files are marked, the
marked movies will be played in sequence.
Show the PopUp menu.
4
OK
Select the desired PopUp menu.
• Press the R E T U R N button to return to normal TV viewing.
! NOTE
G
In the case of files not supported, a message regarding non-supported file is displayed.
67
TO USE A USB DEVICE
Using the Movie List function, play
Picture Size
F
Full
G
1
Audio Language
Subtitle Language
Off
. Sync
0
. Position
0
Close
P i c t u r e S i z e : Selects your desired picture
format during movie play.
G Audio Language & Subtitle Language :
Changes the Language Group of the
audio/subtitle during movie play.
G S y n c : Adjusts the time synchronisation of
the subtitle from -10 secs ~ +10 secs by steps
of 0.5 secs during movie play.
G P o s i t i o n : Changes the position of the subtitle either up or down during movie play.
G
Option
TO USE A USB DEVICE
! NOTE
G
In Singapore and New Zealand, the only language
supported for subtitles is English.
Using the remote control
When playing,
FF
/ GG
repeatedly, press the R E W( FF) button to speed up FF(x2) -> FFF(x4) ->
FFFF(x8) -> FFFFF(x16) ->FFFFFF(x32) .
repeatedly, press the F F( GG) button to speed up GG(x2)-> GGG(x4) -> GGGG(x8)
-> GGGGG(x16) -> GGGGGG(x32).
■
II
During playback, press the P a u s e ( I I) button.
Still screen is displayed.
■If no buttons are pressed on the remote control for 10 minutes after pausing, the TV
returns to the playback state.
■ Press the P a u s e ( I I ) button and then use the F F ( GG ) button for slow motion.
■
■
P L A Y ( G)
Pressing these buttons repeatedly increases the fast forward/reverse speed.
When using the
or
button during playback a cursor indicating the position
can be viewed on the screen.
Press the P L A Y ( G) button to return to normal playback.
Press the E N E R G Y S A V I N G button repeatedly to increase the brightness of your
screen.(Refer to p. 77)
AV MODE
68
Press the A V M O D E button repeatedly to select the desired source.(Refer to p. 55)
DIVX REGISTRATION CODE
Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or
purchased at www.divx.com/vod.
With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed. (Only DivX
files matched with the registration code of the purchased TV are playable.)
USB
Move
OK
USB
Photo List
Photo List
Music List
Music List
Movie List
Movie List
DivX
DivXReg.
Reg.Code
Code
DivX
DivX Reg.
Reg. Code
Code
Deactivation
Deactivation
Move
i
OK
DivX(R) Video On Demand
Your registration Code is: xxxxxxxxxx
To learn more visit www.divx.com/vod.
Close
TO USE A USB DEVICE
1 MENU
Select U S B.
2
Select D i v X R e g . C o d e.
OK
3
• Press the M E N U button to return to normal TV viewing.
OK
Display D i v X R e g . C o d e.
• Press the R E T U R N button to move to the previous menu screen.
“DivX Certified to play DivX video up to HD 1080p, including premium content”
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is
an official DivX Certified device that plays DivX video. Visit www.divx.com for
more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX certified® device must be registered in order to play DivX Video-on-Demand(VOD) content. To generate the
registration code, locate the DivX VOD section in the device setup menu. Go to
vod.divx.com with this code to complete the regitsration process and learn more
about DivX VOD.
! NOTE
Movie files are supported as follows
Resolution : under 1920x1080 WxH pixels
Frame rate : under 30 frames/sec(1920x1080), under 60 frames/sec(under 1280x720)
G Video Codec : MPEG 1, MPEG 2, MPEG 4, DivX 3.11, DivX 4.12, DivX 5.x, DivX 6,
Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10-beta1, Xvid 1.10-beta2, H.264/AVC
G
69
TO USE A USB DEVICE
DEACTIVATION
The purpose of deactivation is to allow deactivation of devices for users who have activated all the available
devices through the web_server and are blocked from activating more devices. DivX VOD allowed the consumer to
activate up to 6 devices under one account, but to replace or deactivate any of those devices, the consumer had
to contact DivX Support and request deletion. Now with this added feature, consumers will be able to deactivate
the device themselves and hence better manage their DivX VOD devices.
USB
Move
OK
USB
Photo List
Photo List
Music List
Music List
Movie List
Movie List
DivX Reg. Code
DivX Reg. Code
Deactivation
Deactivation
Move
i
OK
DivX(R) Video On Demand
Do you want to deactivate your device?
Yes
TO USE A USB DEVICE
1 MENU
2
Select D e a c t i v a t i o n.
OK
Select Y e s.
4
OK
Close
Select U S B.
OK
3
No
i DivX(R) Video On Demand
This device is deactivated.
Your deactivation code is: xxxxxxxx
To learn more visit www.divx.com/vod.
Display D e a c t i v a t i o n.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
70
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
(Only Singapore)
This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options.
The EPG supplies information such as programme listings, start and end times for all available services. In addition,
detailed information about the programme is often available in the EPG (the availability and amount of these programme
details will vary, depending on the particular broadcaster).
This function can be used only when the EPG information is broadcast by broadcasting companies
The EPG displays the programme details for next 8 days.
Shows the present screen information.
Displayed with a Teletext Programme.
Displayed with a DTV Programme.
Displayed with a Subtitle Programme.
Displayed with a Radio Programme.
Displayed with a Scramble Programme.
Displayed with a MHEG Programme.
Displayed with a Dolby Programme.
Displayed with a AAC Programme.
Displayed with a Dolby Digital PLUS
Programme.
❉❚
Aspect ratio of broadcasting programme.
Aspect ratio of broadcasting programme.
576i/p, 720p, 1080i/p : Resolution of broadcasting programme
Switch on/off EPG
1GUIDE
Switch on or off EPG.
1
or
P
Select desired programme.
2
OK
The EPG will disappear after moving to
a selected program.
Button Function in NOW/NEXT Guide Mode
You can view a program being broadcasted and one scheduled to follow.
Programme Guide
1 YLE TV1
❉❚
YELLO
YELLOW Enter Timer Remind setting mode.
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
BLUE Enter Timer Remind list mode.
ALL
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
NOW
1 YLE TV1
Your World Today
4 TV..
Legenen om Den....
Naturtimmen
Lyssna
Glamour
8 YLE24
❉❚
❉❚
FAV Favourite
P
The EPG will disappear after moving to a
selected program.
Mode
Select NOW or NEXT Programme.
GUIDE
Select the Broadcast Programme.
TV/RAD
Page Up/Down.
Keno
World Business
Fantomen
Kritiskt
ABC
Tänään otsikoissa
E
❉❚
OK
NEXT
That ’70s show
2 YLE TV2
5 YLE FST
6 CNN
6 Apr. 2007 15:09
E
RED Change EPG mode.
INFO
i Information
Pr. Change
TV/RAD RADIO
Schedule
or
Switch off EPG.
Schedule List
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
Select a programme
Select TV or RADIO Programme.
Detail information on or off
71
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
Button Function in 8 Day Guide Mode
Programme Guide
1 YLE TV1
❉❚
ALL
❉❚
❉❚
❉❚
GREEN Enter Date setting mode.
14:00
15:00
Kungskonsumente
Antigues Roadshow
Mint Extra
TV2: Farmen The Drum
The Drum
You Call The Hits
Fashion Essentials
...
... ...
Tänään otsikoissa
2 YLE TV2
❉❚
❉❚
4 TV..
❉❚
❉❚
❉❚
5 YLE FST
6 CNN
❉❚
❉❚
❉❚
YELLO
YELLOW Enter Timer Remind setting mode.
6 Apr. (Fri.)
1 YLE TV1
❉❚
❉❚
❉❚
❉❚
8 YLE24
❉❚
❉❚
6 Apr. 2007 15:09
E
RED Change EPG mode.
...
E
FAV❉❚ Favourite
INFO
i Information
Pr. Change
Date
Mode
TV/RAD RADIO
Schedule
Schedule List
BLUE Enter Timer Remind list mode.
Page Up/Down.
P
OK
The EPG will disappear after moving to
a selected program.
GUIDE
Switch off EPG.
or
Select Programme.
TV/RAD
Select TV or RADIO Programme.
Select the Broadcast Programme.
Button Function in Date Change Mode
Programme Guide
❉❚
1 YLE TV1
ALL
6 Apr. 2007 15:09
6 Apr. (Fri.)
14:00
E
❉❚
E
GREEN Switch off Date setting mode.
E
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
72
Detail information on or off
15:00
E
OK
Change to the selected date.
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
Select a date.
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
Switch off Date setting mode.
GUIDE
or
Switch off EPG.
1 YLE TV1
2 YLE TV2
4 TV..
5 YLE FST
6 CNN
8 YLE24
...
Kungskonsumente
Antigues Roadshow
Mint Extra
TV2: Farmen The Drum
The Drum
You Call The Hits
Fashion Essentials
...
... ...
Tänään otsikoissa
E
Date. Change
Date Exit
Button Function in Extended Description Box
❉❚
Information
Text Up/Down.
❉❚
6 Apr. 2007 15:09
❉❚
6 Apr. 2007
YELLO
YELLOW Enter Timer Remind setting mode.
The detail information on or off.
or
GUIDE
E
Switch off EPG.
INFO
i Info. Exit
Schedule
Button Function in Remind Setting Mode
Change to Guide or Schedule mode.
Remind Programme
22/ Dec. 2006 10:06
Programme
Date
Start Time
E
Select Remind.
Function setting.
10 ABC2
22
Dec.
10 : 47
E
Cancel
Save
OK
Save Timer Remind.
Button Function in Schedule List Mode
If you’ve created a schedule list, a scheduled program is displayed at the scheduled time even when you are
watching a different program at the time.
Only the Up/Down/OK/Return keys will work when a popup window is open.
Schedule List
Page1/1
Start Date
GREEN Add new Timer Watching setting mode.
6 May
6 May
Fri. 6 Apr. 2007 15:09
Start Time
16:00
Title
Friend1
18:00
Friend2
Friend2
16:00
Modify
Delete
BLUE or
GUIDE
Switch off EPG.
OK
Delete All
Change to Guide mode.
Remind
DTV 19 Dave
(Fri.)06/05/2007
16:00
D
E
Select your desired Option(Modify/Delete/Delete All).
Move
Close
Modify/Delete
New Remind
P
Page Change
Exit
Programme Guide
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
Select Programme, Date or Start time.
Select S c h e d u l e L i s t.
P
Page Up/Down.
73
MHEG (MULTIMEDIA AND HYPERMEDIA INFORMATION
CODING EXPERT GROUP)(IN DIGITAL MODE)
(Only New Zealand)
This feature is enabled only in New Zealand.
- In New Zealand, pressing the Guide key will display MHEG EPG provided by New Zealand on the screen.
This system has an MHEG(Multimedia and hypermedia information coding expert group) to help your navigation
through all the possible viewing options.
Shows the present screen information.
Displayed with a Teletext Programme.
Displayed with a DTV Programme.
Displayed with a Subtitle Programme.
Displayed with a Radio Programme.
Displayed with a Scramble Programme.
Displayed with a MHEG Programme.
Displayed with a Dolby Programme.
❉❚
Displayed with a AAC Programme.
Aspect ratio of broadcasting programme.
Aspect ratio of broadcasting programme.
MHEG (MULTIMEDIA AND HYPERMEDIA INFORMATION CODING EXPERT GROUP)
74
Switch on MHEG
1GUIDE
Switch on the MHEG.
Select a programme
1
Preview the Broadcast Programme Information.
2
3
change to desired channel.
OK
The MHEG will disappear after moving
to a selected channel.
576i, 720p, 1080i : Resolution of broadcasting
programme
Button Function in NOW/NEXT Mode
Select the Broadcast Programme Information.
Select Channel.
YELLO
YELLOW Change to Next Week or Prev Day.
BLUE Change to Next Day or Today.
Next Week
EPG/Guide
OK
GUIDE
The MHEG will disappear after moving
to a selected channel.
19
Change to Now/Next mode.
Switch off MHEG.
Today
EPG/Guide
Button Function in Listing Mode
You can view a channel being broadcasted and one scheduled to follow.
Select desired channel.
OK
GUIDE
The MHEG will disappear after moving to a
selected channel.
Change to Listing mode.
1
TV ONE
Now 2.30pm
Next 3.00pm
Neighbours
Jojo’s Circus
2
TV2
Now 2.30pm
Next 3.00pm
Neighbours
Jojo’s Circus
3
TV3
Now 2.00pm
Next 3.00pm
Oprah
Rugrats
4
C4
Now 2.00pm
Next 4.00pm
The Officaial NZ Top 40
Vodafone Select Live
Now 12.00am
Next 3.00pm
News : Te Kaea
Advice: Ask Your Auntie
5
Switch off MHEG.
Detail information on or off.
2.33pm Tue 12 Feb
What’s on now/next.
MHEG (MULTIMEDIA AND HYPERMEDIA INFORMATION CODING EXPERT GROUP)
Detail information on or off.
75
PICTURE CONTROL
PICTURE SIZE (ASPECT RATIO) CONTROL
You can watch the screen in various picture formats; 16:9, Just Scan,
Original, 4:3, 14:9, Zoom and Cinema Zoom.
If a fixed image is displayed on the screen for a long time, that fixed image
may become imprinted on the screen and remain visible.
You can adjust the enlarge proportion using
button.
This function works in the following signal.
1Q. MENU
Select A s p e c t R a t i o.
2
T U R E menu.
• For Zoom Setting, select 1 4 : 9, Z o o m and
Select the desired picture format.
PICTURE CONTROL
• 16:9
The following selection will allow you to adjust the picture horizontally, in linear proportion, to fill the entire
screen(useful for viewing 4:3 formatted DVDs).
C i n e m a Z o o m in Ratio Menu. After completing
Zoom Setting, the display goes back to Q.Menu.
• Original
When your TV receives a wide screen signal it will automatically change to the picture format broadcast.
Original
• Just Scan
Following Selection will lead to you view the
picture of best quality without loss of original
picture in high resolution image.
Note : If there is noise in original Picture, You
can see the noise at the edge.
Just Scan
76
• You can also adjust Aspect Ratio in the P I C-
• 4:3
The following selection will allow you to view a picture
with an original 4:3 aspect ratio, gray bars will appear
on both the left and right of the screen.
• Zoom
The following selection will allow you to view
the picture without any alteration, while filling
the entire screen. However, the top and bottom of the picture will be cropped.
• 14:9
You can view a picture format of 14:9 or a general TV
programme in the 14:9 mode. The 14:9 screen is
viewed in the same way as in 4:3, but is magnified to
the left and right.
• Cinema Zoom
Choose Cinema Zoom when you want to
enlarge the picture in correct proportion.
Note:When enlarging or reducing the picture,
the image may become distorted.
Cinema Zoom. The adjustment range is 1~16.
E or D button: Move the screen.
PICTURE CONTROL
F or G button: Adjust enlarge proportion of
! NOTE
G
G
G
G
You can only select 4 : 3, 1 6 : 9 (Wide), 1 4 : 9, Z o o m / C i n e m a Z o o m in Component mode.
You can only select 4 : 3, Original, 1 6 : 9 (Wide), 1 4 : 9, Z o o m / C i n e m a Z o o m in HDMI mode.
You can only select 4 : 3, 1 6 : 9 (Wide) in RGB mode only.
In DTV/HDMI/Component (over 720p) mode, J u s t S c a n is available.
77
PICTURE CONTROL
PICTURE WIZARD
This feature lets you adjust the picture quality of the original image.
Use this to calibrate the screen quality by adjusting the Black and White Level etc. General users can calibrate the
screen quality by easily following each stage.
When you adjust the image to Low, Recommended or High, you can see the changed result as an example.
In RGB-PC/HDMI-PC/DVI-PC mode, the changed Colour, Tint and H/V Sharpness values are not applied.
Picture Wizard
PICTURE
Move
Aspect Ratio
OK
With Picture Wizard, you can adjust the picture quality of the
original image.
: 16:9
Picture Wizard
Energy Saving
Picture Mode
: Off
: Vivid
• Contrast
100
• Brightness
50
• Sharpness
70
• Colour
70
Previous
E
PICTURE CONTROL
1 MENU
Select P I C T U R E.
2
OK
3
OK
4
OK
OK
Next
• If you stop the setting before the final stage, the
changes will not be applied
• The adjustment value is saved to Expert1.
Select P i c t u r e W i z a r d.
Adjust B l a c k l e v e l , W h i t e l e v e l , C o l o u r , T i n t , H S h a r p n e s s ,
V S h a r p n e s s.
MARK
FAV
Select input source to apply the settings.
5
OK
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
78
ENERGY SAVING
It reduces the TV’s power consumption.
The default factory setting complies with the E n e r g y S t a r requirements and is adjusted to the comfortable
level to be viewed at home.
You can increase the brightness of your screen by adjusting the E n e r g y S a v i n g l e v e l or by setting the
P i c t u r e M o d e.
When adjusting Energy Saving in MHEG mode, the Energy Saving setting is applied after MHEG is finished.
PICTURE
Move
Aspect Ratio
OK
Aspect Ratio
: 16:9
Picture Wizard
Energy Saving
Saving :Off
Energy
Off
Picture Wizard
Picture Mode
Picture Mode
Move
OK
: 16:9
EnergySaving
Saving : :Off
Off
Energy
: Vivid
: Vivd
Intelligent Sensor
F
Low
G
Off
Off
• Contrast
100
• Contrast
Minimum
100
• Brightness
50
• Brightness
50Medium
• Sharpness
70
• Sharpness
70Maximum
• Colour
70
• Colour
70
E
E
PICTURE CONTROL
1 MENU
PICTURE
Select P I C T U R E.
2
OK
3
OK
Select
E n e r g y S a v i n g.
Select I n t e l l i g e n t S e n s o r ,
O f f , M i n i m u m , M e d i u m or
M a x i m u m.
• Intelligent Sensor
Select L o w, M i d d l e or H i g h .
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
• You can also adjust this feature by selecting E n e r g y S a v i n g button on the remote control.
79
PICTURE CONTROL
PRESET PICTURE SETTINGS
Picture Mode-Preset
Vivid
Standard
Cinema
Sport
Game
Strengthen the contrast, brightness, colour and sharpness for vivid picture.
The most general screen display status.
Optimizes video for watching movies.
Optimizes video for watching sports events.
Optimizes video for playing games.
PICTURE
Aspect Ratio
Move
OK
: 16:9
Aspect Ratio
Picture Wizard
Energy Saving
Picture
PictureMode
Mode
PICTURE
Move
OK
: 16:9
Picture Wizard
: Off
Energy Saving
: :Vivid
Vivid
• Contrast
Picture
PictureMode
Mode
: Off
: :Vivid
Vivid
100
• Contrast
• Brightness
50
• Brightness
• Sharpness
70
• Sharpness
• Colour
70
• Colour
E
E
Vivid
Vivid
Standard
100
Cinema
50
Sport
70
Game
70
Expert1
Expert2
1 MENU
PICTURE CONTROL
2
OK
3
OK
Select P I C T U R E.
Select P i c t u r e M o d e.
Select V i v i d, S t a n d a r d, C i n e m a,
S p o r t or G a m e.
• P i c t u r e M o d e adjusts the TV for the best picture appearance. Select the preset value in the P i c t u r e
M o d e menu based on the programme category.
• When the Intelligent sensor function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.
• You can also adjust P i c t u r e M o d e in the Q . M e n u.
80
MANUAL PICTURE ADJUSTMENT
Picture Mode-User option
Contrast
Adjusts the signal level between black and white in the picture. You may use Contrast when the bright part of the picture is saturated.
Brightness
Adjusts the base level of the signal in the picture.
Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Colour
Adjusts intensity of all colours.
Tint
Adjusts the balance between red and green levels.
PICTURE
Aspect Ratio
Move
PICTURE
OK
: 16:9
Aspect Ratio
Picture Wizard
Energy Saving
Picture
PictureMode
Mode
Move
OK
: 16:9
Picture Wizard
: Off
Energy Saving
: :Vivid
Vivid
Picture
PictureMode
Mode
: Off
: :Vivid
Vivid
100
• Contrast
• Brightness
50
• Brightness
• Sharpness
70
• Sharpness
• Colour
70
• Colour
E
E
Vivid
Vivid
Standard
100
Cinema
50
Sport
70
Game
70
Expert1
Expert2
1 MENU
Select P I C T U R E.
2
PICTURE CONTROL
• Contrast
Select P i c t u r e M o d e.
OK
3
Select V i v i d, S t a n d a r d, C i n e m a, S p o r t
or G a m e.
OK
4
OK
Select C o n t r a s t, B r i g h t n e s s, S h a r p n e s s,
C o l o u r or T i n t.
OK
Make appropriate adjustments.
5
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
! NOTE
G
G
You cannot adjust colour, sharpness and tint in the RGB-PC mode.
When the E x p e r t 1 / 2 is selected, you can select C o n t r a s t, B r i g h t n e s s, H S h a r p n e s s , V
S h a r p n e s s, C o l o u r or T i n t .
81
PICTURE CONTROL
PICTURE IMPROVEMENT TECHNOLOGY
You can calibrate the screen for each Picture Mode or set the video value according to the special video screen.
You can set the video value differently for each input.
To reset to the factory default screen after making adjustments to each video mode, execute the “Picture Reset”
function for each Picture Mode.
Image shown may differ from your TV.
PICTURE
Move
PICTURE
OK
Move
OK
E
• Contrast
• Brightness
• Contrast
100
70
• Colour
70
• Sharpness
• Colour
Dynamic
70 Colour
• Brightness
50
• Sharpness
100
Colour Temperature
50
Dynamic
70 Contrast
AdvancedControl
Control
••Advanced
R
Noise0 Reduction
AdvancedControl
Control
••Advanced
Gamma
• Picture Reset
• Picture Reset
• Tint
0
R
• Tint
G
F
Medium
G
High
High
G
Medium
Medium
Black Level
Auto
Screen
Screen
Film Mode
Off
E
Close
PICTURE CONTROL
1 MENU
Select P I C T U R E.
2
OK
3
OK
Select A d v a n c e d C o n t r o l.
Select your desired Source.:
C o l o u r T e m p e r a t u r e, D y n a m i c C o n t r a s t , D y n a m i c C o l o u r , N o i s e R e d u c t i o n , G a m m a ,
B l a c k L e v e l, F i l m M o d e, C o l o u r G a m u t, E d g e E n h a n c e r or x v Y C C . ( R e f e r t o p . 8 4~8
85)
4
Make appropriate adjustments.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
82
EXPERT PICTURE CONTROL
By segmenting categories, E x p e r t 1 and E x p e r t 2 provide more categories which users can set as they see fit,
offering the optimal picture quality for users.
This may also be used to help a professional optimize the TV performance using specific videos.
Image shown may differ from your TV.
PICTURE
Aspect Ratio
Move
Picture
Picture Mode
Mode
: Off
Vivid
Standard
:: Vivid Expert1
Cinema
• Contrast
80
Sport
• Brightness
50
OK
G
G
Medium
Auto
On
• Tint
Screen
Expert2
0 R
Colour Standard
••Expert
Expert Control
Colour Gamut
• Picture Reset
Edge Enhancer
E
G
Off
• Colour Film Mode
50
Game
• Sharpness
50
Expert1
Expert1
• Colour
50
E
Off
F
Move
Noise Reduction
• Contrast
80
Gamma
• Brightness
R 50
R
Black Level
• Sharpness
50
Picture Wizard
Energy Saving
Dynamic Contrast
PICTURE
OK
: 16:9
G
SD
Standard
Off
xvYCC
Auto
E
Close
PICTURE CONTROL
1 MENU
Select P I C T U R E.
2
OK
Select P i c t u r e M o d e.
3
OK
Select
OK
Select E x p e r t C o n t r o l.
OK
Select your desired Source.
E x p e r t 1 or
E x p e r t 2.
4
5
6
Make appropriate adjustments.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
83
PICTURE CONTROL
*This feature is not available for all models.
Colour Temperature
(Warm/Medium/Cool)
■
Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to make picture bluish.
■
Adjusts the contrast to keep it at the best level according to the brightness of the
screen. The picture is improved by making bright parts brighter and dark parts darker.
■
Adjusts screen colours so that they look livelier, richer and clearer. This feature
enhances hue, saturation and luminance so that red, blue, green and white look more
vivid.
Noise Reduction
(Off/Low/Medium/High)
■
Reduces screen noise without compromising video quality.
Gamma
(Low/Medium/High)
■
You can adjust brightness of dark area and middle gray level area of the picture.
• L o w : Make dark and middle gray level area of the picture brighter.
• M e d i u m: Express original picture levels.
• H i g h: Make dark and middle gray level area of the picture darker.
Dynamic Contrast
(Off/Low/High)
Dynamic Colour
(Off/Low/High )
Black Level
(Low/High)
PICTURE CONTROL
• L o w : The picture of the screen gets darker.
• H i g h : The picture of the screen gets brighter.
• A u t o : Realizing the black level of the screen and set it to High or Low automatically.
■
■
Film Mode
(On/Off)
■
■
■
Set black level of the screen to proper level.
This function enables to select 'Low' or 'High' in the following mode: AV(NTSC-M), HDMI
or Component. Otherwise, 'Black level' is set to 'Auto'.
You can watch a cinema-like video by eliminating judder effect.
Use this function when you watch movies.
This function can work when TruMotion is off.
• S t a n d a r d : Mode to reproduce original colour according to the standard of
Colour Gamut
(Wide/Standard )
84
input signal independent of the display characteristics.
W
• i d e : Mode to use and set the rich colour area of the display.
■ Maximize the utilization for colour area that can be expressed.
Edge Enhancer
(On/Off)
■
Shows clearer and distinctive yet natural corners of the video.
xvYCC
(Auto/off/on)
■
This is the function to express richer colour.
This function is enabled in "Picture mode - Cinema, Expert" when xvYCC signal is
inputted through HDMI
■
Colour Standard
(SD/HD)
■
■
White Balance
(Medium/Warm/Cool)
Converts the colour of a different video to HD colour. This function is set for SD
video (BT-601) and HD video (BT-709) colour format.
This is the function to adjust the overall colour of the screen to the feeling you want.
a. • Method : 2 Points
• Pattern: Inner, Outer
• Red/Green/Blue Contrast, Red/Green/Blue Brightness:
The adjustment range is -50 ~ +50.
b. • Method : 20 Point IRE
• Pattern: Inner / Outer
• IRE (Institute of Radio Engineers) is the unit to display the size of the video signal and can be set among 5, 10, 15 - 100, You can adjust Red, Green or Blue
according to each setting.
• Red/Green/Blue: The adjustment range is -50 ~ +50.
Colour Management
System
As the tool used by the experts to make adjustments by using the test patterns, this
does not affect other colours but can be used to selectively adjust the 6 colour
areas (Red/Green/Blue/Cyan/Magenta/Yellow).
Colour difference may not be distinctive even when you make the adjustments for
the general video.
■ Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
• Red/Green/Blue/Yellow/Cyan, Magenta Colour : The adjustment range
is -30 ~ +30.
• Red/Green/Blue/Yellow/Cyan/Magenta Tint : The adjustment range is
-30 ~ +30.
■ This feature is disable in RGB-PC and HDMI (PC) mode.
■
PICTURE CONTROL
85
PICTURE CONTROL
PICTURE RESET
Settings of the selected picture modes return to the default factory settings.
PICTURE
Move
PICTURE
OK
E
100
OK
• Contrast
100
• Brightness
50
• Brightness
• Sharpness
70
• Colour
70
• Sharpness
70
? All picture setting will be resetted.
• Colour
70
continue?
G
• Tint
0 R
• Tint
0
R
G
• Advanced Control
Screen
50
• Advanced Control
Yes
PictureReset
Reset
••Picture
PictureReset
Reset
••Picture
PICTURE CONTROL
1 MENU
Move
E
• Contrast
No
Screen
Select P I C T U R E.
2
OK
Select P i c t u r e R e s e t.
OK
Select Y e s or N o.
3
4
OK
Initialize the adjusted value.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
86
IMAGE STICKING MINIMIZATION (ISM) METHOD
A frozen or still picture displayed on the screen for prolonged periods will result in a ghost image remaining
even when you change the image. Avoid allowing a fixed image to remain on the screen for prolonged periods.
Normal
If image sticking is never a problem, ISM is not necessary - set to Normal.
White Wash
White wash removes permanent images from the screen.
Note: An excessive permanent image may be impossible to clear entirely with White Wash.
Orbiter
Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the
screen. To avoid a permanent image on the screen, the screen will move every 2 minutes.
Colour Wash
The colour block with the screen moved a little and the white pattern are alternately displayed. It is difficult to sense the afterimage occurred while the temporary afterimage is removed and the colour pattern is
operating.
OPTION
Move
OK
OPTION
OK
E
E
: On
SIMPLINK
: On
Key Lock
: Off
Key Lock
: Off
Simple Manual
Set ID
:1
Set ID
ISM
ISM Method
Method
: Normal
ISM Method
Normal
::Normal
Demo Mode
: On
Demo Mode
: On
Mode Setting
: Store Demo
Mode Setting
Factory Reset
Select O P T I O N.
Factory Reset
:1
Normal
Orbiter
: Store Demo
Colour Wash
White Wash
PICTURE CONTROL
Simple Manual
1 MENU
Move
SIMPLINK
• If you do not need this function, set N o r m a l .
2
OK
Select I S M M e t h o d.
3
Select N o r m a l , O r b i t e r , C o l o u r W a s h or W h i t e W a s h .
OK
4
OK
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
87
PICTURE CONTROL
DEMO MODE
Display the slide show to explain the various logo of this TV.
It is not possible to use D e m o M o d e in H o m e U s e mode.
In S t o r e D e m o, D e m o M o d e is automatically set to O n.
Once D e m o M o d e is set to O f f in S t o r e D e m o, D e m o M o d e does not run and only the screen is reset.
The screen is reset automatically after 5 minutes in D e m o M o d e.
OPTION
Move
OK
OPTION
Move
OK
E
E
SIMPLINK
: On
SIMPLINK
: On
Key Lock
: Off
Key Lock
: Off
Simple Manual
Simple Manual
Set ID
:1
Set ID
:1
ISM Method
: Normal
Demo
DemoMode
Mode
: On
On
ISM Method
Demo
DemoMode
Mode
: Normal
: On
On
Off
Off
Mode Setting
: Store Demo
Mode Setting
: Store
On
On Demo
On(LED
On(LED On)
On)
Factory Reset
Factory Reset
On(LED Off)
Only 42/50PQ6***,
50PS3***
PICTURE CONTROL
1 MENU
Only 50/60PS8***
Select OPTION.
2
OK
Select Demo Mode.
OK
Select O n to show the various logo of TV.
OK
Return to TV viewing.
If you want to stop the demo, press any button. (except for
+ , - button)
MUTE,
3
4
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
88
MODE SETTING
H o m e U s e ” mode for the best picture in your home environment.
We recommend setting the TV to “H
S t o r e D e m o ” mode is an optimal setting for displaying at stores..
“S
OPTION
Move
OK
OPTION
Move
OK
E
SIMPLINK
: On
SIMPLINK
Key Lock
: Off
Key Lock
:1
Set ID
ISM Method
: Normal
ISM Method
Demo Mode
: On
Demo Mode
Store
Demo
::Store
Demo
Mode
ModeSetting
Setting
ModeSetting
Setting
Mode
Factory Reset
Selecting
the environment.
:1
Choose
the setting mode you want.
: Normal
: On
StoreDemo
Demo
:: Store
Store
Demo
Factory Reset
E
Home Use
Select [Home Use] to use this TV at home. To use
this TV at store, select [Store Demo].
PICTURE CONTROL
1 MENU
: Off
Simple Manual
Simple Manual
Set ID
: On
Select OPTION.
2
OK
Select Mode Setting.
3
Select Store Demo or Home Use.
OK
4
OK
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
89
SOUND & LANGUAGE CONTROL
AUTO VOLUME LEVELER
AVL automatically remains on the same level of volume if you change programmes.
Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time
the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments
for each program.
If sound quality or volume is not at the level you want, it is recommended to use a separate home theater system
or amp to cope with different user environments.
AUDIO
Auto Volume
Clear Voice II
Move
Auto Volume
Clear Voice II
: Off
• Level
Balance
Sound Mode
3
-
+
0
L
R
2
OK
Move
OK
Off
Off
: :Off
Off
: Off
On
• Level
3
-
+
0
L
R
Balance
Sound Mode
: Standard
: Standard
• SRS TruSurround XT : Off
• SRS TruSurround XT : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
E
1 MENU
AUDIO
OK
::Off
Off
E
Select A U D I O.
Select A u t o V o l u m e.
SOUND & LANGUAGE CONTROL
3
OK
Select O n or O f f.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
90
CLEAR VOICE II
By differentiating the human sound range from others, it helps users listen to human voices better.
AUDIO
Move
AUDIO
OK
Auto Volume
: Off
Auto Volume
ClearVoice
VoiceIIII
Clear
Off
: :Off
Clear Voice II
• Level
Balance
Sound Mode
3
-
+
0
L
R
Sound Mode
: Standard
: Off
Off
Off
On
3
-
+
0
L
R
: Standard
• SRS TruSurround XT : Off
• SRS TruSurround XT : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
Select A U D I O.
OK
• Level
Balance
E
E
1 MENU
Move
: Off
O n” for C l e a r V o i c e I I, S R S
• If you select “O
T r u S u r r o u n d X T feature will not work.
• Select levels from ‘-6’ to ’+6’.
OK
Select C l e a r V o i c e I I.
OK
Select O n or O f f.
3
Adjustment for Clear Voice Level With selecting On
4
OK
Select L e v e l.
OK
Make desired adjustment.
5
SOUND & LANGUAGE CONTROL
2
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
91
SOUND & LANGUAGE CONTROL
PRESET SOUND SETTINGS-SOUND MODE
You can select your preferred sound setting; Standard, Music, Cinema, Sport or Game and you can also adjust
the Treble, Bass.
Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound
options based on the programme content.
Standard, Music, Cinema, Sport and Game are preset for optimum sound quality at the factory.
Standard
Music
Cinema
Sport
Game
Offers standard-quality sound.
Optimizes sound for listening to music.
Optimizes sound for watching movies.
Optimizes sound for watching sports events.
Optimizes sound for playing games.
AUDIO
Auto Volume
Clear Voice II
Move
Auto Volume
: Off
Clear Voice II
• Level
Balance
Sound Mode
Mode
Sound
AUDIO
OK
: Off
3
-
+
0
L
R
: Standard
Balance
• SRS TruSurround XT : Off
50
• Bass
50
E
SOUND & LANGUAGE CONTROL
1 MENU
Select A U D I O.
OK
: Off
• Level
Sound Mode
• Treble
Move
: Off
:: Standard
Standard
3
-
0
L
+
R
Standard
Standard
Music
• SRS TruSurround XT - : Off
Cinema
• Treble
50 Sport
• Bass
50
Game
E
+
+
+
• You can also adjust S o u n d M o d e in the Q .
M e n u.
2
OK
Select S o u n d M o d e.
3
OK
Select S t a n d a r d , M u s i c , C i n e m a , S p o r t or G a m e.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
92
SOUND SETTING ADJUSTMENT -USER MODE
AUDIO
Move
AUDIO
OK
Auto Volume
: Off
Auto Volume
Clear Voice II
: Off
Clear Voice II
• Level
Balance
Sound
Sound Mode
Mode
3
-
+
0
L
R
: :Standard
Standard (User)
2
: Off
Balance
Sound Mode
OK
: Off
• Level
3
-
0
L
+
R
Standard
Standard (User)
::Standard
Standard (User)
• SRS TruSurround XT : Off
Music
• SRS TruSurround XT :Cinema
Off
• Treble
50
• Treble
50
Sport
• Bass
50
• Bass
50
Game
E
E
1 MENU
Move
Select A U D I O.
OK
Select S o u n d M o d e.
OK
Select S t a n d a r d , M u s i c , C i n e m a , S p o r t or G a m e.
OK
Select T r e b l e or B a s s.
OK
Set the desired sound level.
3
4
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
SRS TRUSURROUND XT
Select this option to sound realistic.
1 MENU
2
Select A U D I O.
OK
Select S R S T r u S u r r o u n d X T.
OK
Select O n or O f f.
S R S T r u S u r r o u n d X T : TruSurround XT is a
patented SRS technology that solves the problem of playing 5.1 multicannel content over two
speakers.
SOUND & LANGUAGE CONTROL
5
3
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
G
G
is a trademark of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs, Inc.
93
SOUND & LANGUAGE CONTROL
BALANCE
You can adjust the sound balance of the speakers to preferred levels.
AUDIO
Auto Volume
Clear Voice II
Move
Auto Volume
: Off
Clear Voice II
• Level
Balance
Balance
Sound Mode
AUDIO
OK
: Off
3
-
+
0
LL
RR
: Standard
3
L-
Balance
00L L
Balance
Sound Mode
OK
: Off
• Level
: Standard
• SRS TruSurround XT : Off
• SRS TruSurround XT : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
E
1 MENU
Move
: Off
R+
0
R
F
R
L
R
G
Close
E
Select A U D I O.
SOUND & LANGUAGE CONTROL
2
OK
Select B a l a n c e.
3
OK
Make desired adjustment.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
94
TV SPEAKERS ON/ OFF SETUP
You can adjust the TV internal speaker status.
In A V, C O M P O N E N T, R G B and H D M I 1 with HDMI to DVI cable, the TV speaker can be operational even
when there is no video signal.
If you wish to use an external Hi-Fi system, turn off the TV’s internal speakers.
AUDIO
Move
AUDIO
OK
E
Sound Mode
0
OK
Balance
0
L
• SRS TruSurround XT : Off
• SRS TruSurround XT : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
: On
R
: Standard
• Reset
Digital Audio Out : PCM
TVSpeaker
Speaker
On
TV
:: On
Off
On
On
Select A U D I O.
SOUND & LANGUAGE CONTROL
2
R
Sound Mode
• Reset
1 MENU
L
: Standard
Digital Audio Out : PCM
TV Speaker
Speaker
TV
OK
E
Balance
Move
Select T V S p e a k e r.
3
OK
Select O n or O f f.
! NOTE
G
When the TV speaker is turned off while the Simplink home theater is operating, the sound output automatically switches to the Home theater speaker, but when the TV speaker is turned on, the sound output
the TV speaker.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
95
SOUND & LANGUAGE CONTROL
SELECTING DIGITAL AUDIO OUT
This function allows you to select your preferred Digital Audio Output.
The TV can only output DOLBY Digital if a channel is broadcast with Dolby Digital audio.
When Dolby digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF(Sony Philips Digital
InterFace) output to Dolby Digital.
If Auto is selected in the digital audio out menu when dolby digital is not available, SPDIF output will be
PCM(Pulse-code modulation).
Even if both Dolby Digital and Audio language have been set in a channel which broadcast Dolby Digital Audio,
only Dolby Digital will be played.
AUDIO
Move
AUDIO
OK
Move
E
Sound Mode
SOUND & LANGUAGE CONTROL
1 MENU
2
OK
0
L
R
Balance
: Standard
0
Sound Mode
L
• SRS TruSurround XT : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
• Reset
• Reset
DigitalAudio
AudioOut
Out : :PCM
PCM
Digital
DigitalAudio
AudioOut
Out : :PCM
PCM
Digital
TV Speaker
TV Speaker
: On
: On
Auto
PCM
PCM
Manufactured under license from
Dolby Laboratories. “Dolby “and
the double-D symbol are trademarks of Dolby Laboratories.
Select A U D I O.
Select D i g i t a l A u d i o O u t.
R
: Standard
• SRS TruSurround XT : Off
3
OK
OK
E
Balance
• There is a possibility that when HDMI mode,
some DVD players do not make SPDIF sound.
At that time, set the output of the digital audio
of the DVD player to PCM. (In HDMI, Dolby
Digital Plus is not supported).
Select A u t o or P C M.
Item
Auto(Speaker On)
Auto(Speaker Off)
PCM
Audio Input
MPEG
DD
DD+
HE-AAC
MPEG
DD
DD+
HE-AAC
PCM
Digital Audio output
PCM
DD
DD
PCM
PCM
DD
DD
DD
PCM
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
96
AUDIO RESET
Settings of the selected Sound Mode return to the default factory settings.
AUDIO
Move
AUDIO
OK
Move
E
E
Balance
0
Sound Mode
L
: Standard
R
Balance
0
Sound Mode
• SRS TruSurround XT : Off
1 MENU
2
OK
OK
• Treble
50
• Bass
•• Reset
Reset
50
R
• SRS TruSurround XT : Off
i
• Treble
Resetting
sound mode50configuration...
• Bass
•• Reset
Reset
Digital Audio Out : PCM
Digital Audio Out : PCM
TV Speaker
TV Speaker
: On
L
: Standard
50
: On
Select A U D I O.
Select R e s e t.
SOUND & LANGUAGE CONTROL
3
OK
Initialize the adjusted value.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
97
SOUND & LANGUAGE CONTROL
STEREO RECEPTION (IN ANALOGUE MODE ONLY)
When a programme is selected, the sound information for the station appears with the programme number
and station name.
1Q. MENU
Select A u d i o.
2
Select the sound output.
OK
A
SOUND & LANGUAGE CONTROL
98
Broadcast
On Screen Display
Mono
MONO
Stereo
STEREO
NICAM (Only Singapore & New Zealand)
NICAM (Only Singapore & New Zealand)
Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of
sound is improved.
SPEAKER SOUND OUTPUT SELECTION
In AV, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers.
Select the sound output.
L + R : Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio
R input is sent to the right loudspeaker.
L + L : Audio signal from audio L input is sent to left and right loudspeakers.
R + R : Audio signal from audio R input is sent to left and right loudspeakers.
LANGUAGE SELECTION (IN DIGITAL MODE ONLY)
The Audio function allows selection of a preferred language.
If audio data in a selected language is not broadcast, the default language audio will be played.
Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed.
When the languages you selected as the primary for Audio Language and Subtitle Language are not supported,
you can select language in secondary category.
1 MENU
1 MENU
Select O P T I O N.
2
2
Select A u d i o L a n g u a g e or
S u b t i t l e L a n g u a g e.
OK
Select O P T I O N.
OK
3
Select Hard of Hearing(
).
3
Select your desired language.
OK
OK
Select O n or O f f.
4
OK
Save.
• Press the R E T U R N button to move to the previous menu screen.
1Q. MENU
2
Audio Language OSD Information
Display
N.A
Select A u d i o
Select an audio language.
3
< Subtitle Language Selection >
G When two or more subtitle languages are broadcast, you
can select the subtitle language with the SUBTITLE button
on the remote control.
button to select a subtitle language.
G Press the
Status
Not Available
MPEG Audio
Dolby Digital Audio
Audio for “Visual Impaired”
Audio for “Hearing Impaired”
Dolby Digital Plus Audio
AAC Audio
Select L+R, L+L or R+R.
SOUND & LANGUAGE CONTROL
< Audio Language Selection >
G When two or more audio languages are broadcast, you can
select the audio language.
Subtitle Language OSD Information
Display
N.A
Status
Not Available
Teletext Subtitle
Subtitle for “Hard of Hearing”
- The audio/subtitles can be displayed in a simpler form with 1 to 3 characters broadcast by the service provider.
- When you select supplementary Audio (Audio for “Visual/Hearing Impaired”) the TV may output a part of the Main audio.
99
TIME SETTING
CLOCK SETUP
The clock is set automatically when receiving a digital signal. (You can set the clock manually only if the TV has no
DTV signal.)
You must set the time correctly before using on/off timer function.
TIME
Move
OK
Clock
TIME
Move
Clock
Clock
Off Time
: Off
Off Time
: Off
On Time
: Off
On Time
: Off
Sleep Timer
: Off
Sleep Timer
: Off
OK
Date
01
Month
Mar
Year
2008
Hour
16
Minute
09
Close
1 MENU
TIME SETTING
2
Select T I M E.
OK
Select C l o c k.
OK
Select either the year, month, date or time option.
3
4
Set the year, month, date or time option.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
100
AUTO ON/OFF TIME SETTING
The Off time function automatically switches the TV to standby at a preset time.
Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode
unless a button has been pressed.
The Off time function overrides the On time function if both are set to the same time.
The TV must be in standby mode for the On time to work.
TIME
Move
TIME
OK
Clock
Move
Clock
Off Time
: Off
On Time
: Off
Off Time
On Time
Off
Sleep Timer
: Off
On Time
Sleep Timer
OK
1 Mar. 2007 16:09
:
Repeat
F
Off
: Off
Hour
00
: Off
00
: OffMinute
Input
G
Antenna
Programme
TV1
Volume
30
Close
1 MENU
• To cancel O n / O f f T i m e function, select O f f.
• For On Time function only
1
2
OK
Select R e p e a t.
3
Select O f f, O n c e, D a i l y, M o n ~ F r i,
M o n ~ S a t, S a t ~ S u n or S u n.
4
5
Select Antenna, A V, Component, RGB or
HDMI.
Set the programme.
TIME SETTING
OK
Select I n p u t.
Select O f f T i m e or O n T i m e.
2
3
4
Select T I M E.
Adjust volume level at
switch-on.
Set the hour.
6
Set the minutes.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
101
TIME SETTING
SLEEP TIMER SETTING
You do not have to remember to switch the TV off before you go to sleep.
The sleep timer automatically switches the TV to standby after the preset time has elapsed.
1Q. MENU
2
Select S l e e p T i m e r.
Select O f f, 1 0, 2 0, 3 0, 6 0, 9 0, 1 2 0, 1 8 0 or 2 4 0 m i n..
• When you switch the TV off, the preset sleep timer is cancelled.
• You can also adjust S l e e p T i m e r in the T I M E menu.
TIME SETTING
102
PARENTAL CONTROL / RATINGS
SET PASSWORD & LOCK SYSTEM
Enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset.
If a channel is locked, enter the password to unlock it temporarily.
LOCK
Move
Lock
LockSystem
System
OK
:: Off
Off
Move
Lock System
Off
::Off
Off
Off
Set Password
Set Password
On
Block Programme
Block Programme
Parental Guidance
: Blocking Off
Input Block
1 MENU
LOCK
Select L O C K.
Parental Guidance
OK
: Blocking Off
Input Block
• If you forget your password, press ‘7’, ‘7’, ‘7’, ‘7’
on the remote control handset.
2
Select L o c k S y s t e m.
OK
Select O n.
3
4
OK
OK
5
1
2
3
4
5
6
7
8
9
0
Set the password.
Input a 4-digit password.
Be sure to remember this number!
Re-enter new password for confirm.
• Press the M E N U button to return to normal TV viewing.
PARENTAL CONTROL / RATINGS
OK
• Press the R E T U R N button to move to the previous menu screen.
103
PARENTAL CONTROL / RATINGS
BLOCK PROGRAMME
Blocks any programme that you do not want to watch or that you do not want your children to watch.
O n”.
It is available to use this function in L o c k S y s t e m ”O
Enter a password to watch a blocked programme.
800
LOCK
Lock System
Move
The HITS
DTV
OK
: Off
Set Password
Block Programme
Parental Guidance
: Blocking Off
RADIO
TV
800 The HITS
801 TMF
802 UKTV Br’tldeas
803 ftn
804 Ideal World
805 4TVinteractive
806 ITV Play
807 Film4
808 E4+1
809 Sky News
810 Sky Spts News 811 SKY THREE
Input Block
812 Sky Text
Pr. Change
Navigation
P
813 tvtv DIGITAL
Page Change
Previous
Block/Unblock
1 MENU
Select L O C K.
2
OK
Select B l o c k P r o g r a m m e.
3
OK
Enter the B l o c k P r o g r a m m e.
PARENTAL CONTROL / RATINGS
4
GREEN Select a programme to be locked.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
104
PARENTAL CONTROL (IN DIGITAL MODE ONLY)
This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate.
A password is required to gain access to this menu.
This set is programmed to remember which option it was last set to even if you switch the set off.
Prevents children from watching certain adult’s TV programmes, according to the ratings limit set.
Enter a password to watch a blocked programme.
LOCK
Move
Lock System
OK
: Off
LOCK
Lock System
Set Password
Set Password
Block Programme
Block Programme
Parental Guidance
Guidance
Parental
Blocking Off
Off
: Blocking
Parental Guidance
Input Block
Input Block
Move
OK
: Off
Blocking Off : Permits all
programmes
Block All
Blocking
Off
:: Blocking
Off
G
PGR
M
AO
AV
R
10 and above
11 and above
12 and above
13 and above
14 and above
15 and above
16 and above
17 and above
18 and above
Blocking Off
Blocking Off
(Only New Zealand)
1 MENU
Blocking Off : Permits all
programmes
(Only Singapore)
Select L O C K.
2
Select P a r e n t a l G u i d a n c e.
OK
Make appropriate adjustments.
PARENTAL CONTROL / RATINGS
OK
3
4
OK
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
105
PARENTAL CONTROL / RATINGS
EXTERNAL INPUT BLOCKING
Enables you to block an input.
O n”.
It is available to use this function in L o c k S y s t e m ”O
AV1
LOCK
Lock System
Move
OK
: Off
Lock System
Set Password
Set Password
Block Programme
Block Programme
Parental Guidance
LOCK
: Blocking Off
Input
Input Block
Block
F
AV2
Move
Component1
: Off
Component2
G
OK
Off
Off
RGB
Off
Parental Guidance HDMI1
: Blocking Off
Input Block
Off
Off
Off
HDMI2
Off
HDMI3
Off
HDMI4
Off
(Only 50/60PS8***)
Close
1 MENU
Select L O C K.
2
OK
Select I n p u t B l o c k.
OK
Select input source.
OK
Select O n or O f f.
3
PARENTAL CONTROL / RATINGS
4
5
OK
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
106
KEY LOCK
The TV can be set so that the remote control is required to control it. This feature can be used to prevent unauthorized viewing.
OPTION
Move
OPTION
Move
Audio Language
: English
Audio Language
Subtitle Language
: English
Subtitle Language
Hard of Hearing(
Country
) : Off
: New Zealand
Input Label
Hard of Hearing(
Country
OK
: English
: English
) : Off
: New Zealand
Input Label
SIMPLINK
: On
SIMPLINK
: On
Key Lock
: Off
Key Lock
Lock
Key
: Off
: Off
Off
Off
On
Simple Manual
E
1 MENU
OK
Simple Manual
E
Select O P T I O N.
O n’, if the TV is turned off, press the r / I,
• In K e y L o c k ‘O
OK
Select K e y L o c k.
) button on the TV or
INPUT, P D or E(or P
POWER, INPUT, P
or NUMBER buttons on the
remote control then the set will be turned on.
Key Lock On ’
• With the K e y L o c k O n, the display ‘
appears on the screen if any button on the front panel is
pressed while viewing the TV. (Except for r / I button)
OK
Select O n or O f f.
2
3
OK
PARENTAL CONTROL / RATINGS
4
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
107
TELETEXT
This feature is not available in all countries.
Teletext is a free service broadcast by most TV stations which
gives up-to-the-minute information on news, weather, television
programmes, share prices and many other topics.
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
SWITCH ON/OFF
Press the T E X T button to switch to teletext. The initial page or last
page viewed appears on the screen.
Two page numbers, TV station name, date and time are displayed on
the screen headline. The first page number indicates your selection,
while the second shows the current page displayed.
Press the T E X T button to switch off teletext. The previous mode
reappears.
FREEZE
SIMPLE TEXT
A
Page selection
1
Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you
press a wrong number, you must complete the three digit number and then re-enter the correct page number.
The P
button can be used to select the preceding or following page.
2
TOP TEXT
The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field
denotes the next group and the blue field indicates the next block.
TELETEXT
A
Block / group / page selection
1
4
With the blue button you can progress from block to block.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
With the green button you can proceed to the next existing page with automatic overflow to the next group.
Alternatively the P button can be used.
The red button returns to the previous selection. Alternatively the P button can be used.
A
Direct page selection
2
3
108
As with SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER
buttons in TOP mode.
FASTEXT
The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button.
A Page selection
1
2
3
4
Press the T . O P T button and then use
button to select i menu. Display the index page.
You can select the pages which are colour coded along the bottom line with corresponding coloured buttons.
AS with SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode.
The P
button can be used to select the preceding or following page.
SPECIAL TELETEXT FUNCTIONS
■
Press the T . O P T button and then use
button to select the Text Option menu.
i
A Index
Select the each index page.
Text Option
Index
Time
A Time
When viewing a TV programme, select this menu to display the time at the top right hand
corner of the screen.
In the teletext mode, press this button to select a sub page number. The sub page number is
displayed at the bottom of the screen. To hold or change the sub page, press the
RED/GREEN,
or NUMBER buttons.
Hold
Reveal
Update
Close
A Hold
?
A Reveal
Select this menu to display concealed information, such as solutions to riddles or puzzles.
TELETEXT
Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages. The number of
sub pages and the sub page displayed is, usually, shown on the screen below the time. When this menu is selected the
stop symbol is displayed at the top left-hand corner of the screen and the automatic page change is inactive.
A Update
Displays the TV picture on the screen while waiting for a new teletext page. The display will appear at the top left hand
corner of the screen. When the updated page is available then display will change to the page number. Select this menu
again to view the updated teletext page.
109
APPENDIX
TROUBLESHOOTING
The TV does not operate properly.
Check to see if there is any object between the TV and the remote control causing
an obstruction. Ensure you are pointing the remote control directly at the TV.
A Ensure that the batteries are installed with correct polarity (+ to +, - to -).
A Install new batteries.
A
The remote control
does not work
Power is suddenly
turned off
Is the sleep timer set?
A Check the power control settings. Has the Power supply been interrupted.
A If the TV is switched on and there is no input signal, it will switch off automatically after 15 minutes.
A
The video function does not work.
Check whether the TV is switched on.
A Try another channel. The problem may be with the broadcast.
A Is the power cord inserted correctly into the mains?
A Check your antenna direction and/or location.
A Test the mains outlet by plugging another TV into the same outlet.
A
No picture & No sound
Picture appears slowly
after switching on
A
This is normal, the image is muted during the TV startup process. Please contact
your service centre, if the picture has not appeared after five minutes.
Adjust Colour in menu option.
A Allow a sufficient distance between the TV and the VCR.
A Try another channel. The problem may be with the broadcast.
A Are the video cables installed properly?
A Activate any function to restore the brightness of the picture.
A
No or poor colour
or poor picture
Horizontal/vertical bars
or picture shaking
APPENDIX
Poor reception on
some channels
Lines or streaks
in pictures
No picture
when connecting HDMI
110
A
Check for local interference such as an electrical appliance or power tool.
Station or cable channel experiencing problems, tune to another station.
Station signal is weak, reposition the antenna to receive weaker stations.
A Check for sources of possible interference.
A
A
A
Check antenna (Change the position of the antenna).
A
Check that your HDMI cable is version 1.3 or higher.
If the HDMI cables don’t support HDMI version 1.3, flickering or no screen display
can result. Please use the latest cables that support at least HDMI version 1.3.
The audio function does not work.
A
Picture OK & No sound
A
A
A
No output from one
of the speakers
+ or - button.
Press the
Sound muted? Press MUTE button.
Try another channel. The problem may be with the broadcast.
Are the audio cables installed properly?
A
Adjust B a l a n c e in menu option.
Unusual sound from
inside the TV
A
A change in ambient humidity or temperature may result in an unusual noise
when the TV is switched on or off and does not indicate a fault with the TV.
No sound when
connecting HDMI
or USB
A
Check HDMI cable over version 1.3.
Check USB cable over version 2.0.
A
*This feature is not available for all models.
There is a problem in PC mode. (Only PC mode applied)
The signal is out of range
(Invalid format)
Vertical bar or stripe on
background &
Horizontal Noise &
Incorrect position
Screen colour is unstable
or single colour
A
Adjust resolution, horizontal frequency, or vertical frequency.
A
Check the input source.
A
Use Auto configure or adjust clock, phase, or H/V position. (Option)
A
Check the signal cable.
Reinstall the PC video card.
A
There is a problem with PICTURE settings.
A
It means that the TV is currently set to S t o r e D e m o mode.
To switch to H o m e u s e mode you should do the followings:
From the TV Menu, choose O P T I O N -> Choose M o d e S e t t i n g -> Choose
H o m e u s e. Now, you have completed switching to the H o m e u s e mode.
APPENDIX
When the user changes
the picture settings, the
TV automatically converts
back to the initial settings
after a certain period of
time.
111
APPENDIX
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV.
Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1
A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water
and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it
to wipe the screen.
2
Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching on.
Cleaning the Cabinet
A
A
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
Do not to use a wet cloth.
Extended Absence
CAUTION
G
APPENDIX
112
If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power
cord to protect against possible damage from lightning or power surges.
PRODUCT SPECIFICATIONS
42PQ6***
50PQ6***
50PS3***
42PQ60D-GA
50PQ60D-GA
50PS30FD-GA
with stand
1031.2 x 720.9 x 308 mm
40.6x 28.4 x 12.1 inches
1228.8 x 824.6 x353 mm
48.3 x 32.4 x 13.8 inches
1216.7 x 818.1 x 353.0 mm
47.9 x 32.2x 13.9inches
without stand
1031.2 x 656.7 x 80.8 mm
40.6 x 25.9 x 3.2 inches
1228.8 x 772 x 78.9 mm
48.3 x 30.3 x 3.1 inches
1216.7x 759.1 x 83.0 mm
47.9 x 29.9 x 3.3 inches
with stand
without stand
25.3 kg / 55.7 lbs
23.3 kg / 5.3 lbs
35 kg / 77.1 lbs
32,5 kg / 71.6 lbs
35.4 kg / 78.0 lbs
32.8 kg / 72.3 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
MODELS
Dimensions
(Width x Height x Depth)
Weight
Power requirement
Power Consumption
50PS8***
60PS8***
50PS80FD-GA
60PS80FD-GA
with stand
1228.0 x 835.8 x 309 mm
48.4 x 32.9x 12.2inches
1465.4 x 986.4 x371 mm
57.7 x 38.8 x 14.6 inches
without stand
1228.0x 795.1 x 78.9 mm
48.4 x 31.3 x 3.1 inches
1465.4 x 926.7 x 82.1 mm
57.7 x 36.5 x 3.2 inches
with stand
without stand
38.3 kg / 84.4 lbs
34.3kg / 75.6 lbs
53.6 kg / 118.7 lbs
46.6 kg / 102.7 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
MODELS
Dimensions
(Width x Height x Depth)
Weight
Power requirement
Power Consumption
32 ~ 104°F (0 ~ 40°C)
Less than 80%
Operating Temperature
Environment condition
Operating Humidity
Storage Temperature
-4 ~ 140°F (-20 ~ 60°C)
Less than 85%
Storage Humidity
Supported movie files
Refer to p. 65~66
Analogue
Digital
Television System
External Antenna Impedance
■
PAL B/G, DK, I
UHF 21-69
BG: VHF/UHF 1-69, CATV 01-47
I: VHF/UHF 1-69, CATV 01-47
DK: VHF/UHF 1-69, CATV 01-47
75 ohm
75 ohm
APPENDIX
Programme Coverage
DVB-T
The specifications shown above may be changed without prior notice for quality improvement.
113
APPENDIX
IR CODES
1. How to Connect
A
Connect your wired remote control to the Remote Control port on the TV.
2. Remote Control IR Codes
A
Output waveform
Single pulse, modulated with 37.917KHz signal at 455KHz
Carrier frequency
Tc
FCAR = 1/Tc = fOSC/12
Duty ratio = T1/Tc = 1/3
T1
A
Configuration of frame
1st frame
Lead code
Low custom code
High custom code
Data code
Data code
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
Repeat frame
Repeat code
A
Tf
Lead code
9 ms
4.5 ms
A
Repeat code
0.55 ms
9 ms
A
2.25 ms
Bit description
Bit ”0”
Bit ”1”
0.56 ms
0.56 ms
APPENDIX
2.24 ms
1.12 ms
A
Frame interval: Tf
The waveform is transmitted as long as a key is depressed.
Tf
Tf
Tf=108ms @455KHz
114
Code (Hexa)
08
0B
f0
45
43
AB
07
06
40
41
44
28
AA
30
02
03
00
01
1E
09
10 ~19
53
1A
72
71
63
61
20
21
39
7E
95
65
79
Function
POWER
INPUT
TV/RAD
Q.MENU
MENU
GUIDE
Left ( )
Right ( )
Up ( )
Down ( )
OK( )
RETURN/EXIT
INFO i
AV MODE
+
P
P
FAV(MARK)
MUTE
Number Key 0~9
LIST
Q.VIEW
RED Key
GREEN Key
YELLOW Key
BLUE Key
TEXT
T.OPT(T.Option)
SUBTITLE
SIMPLINK
ENERGY SAVING
FREEZE
RATIO
Note
R/C BUTTON (POWER ON/OFF)
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
APPENDIX
115
APPENDIX
EXTERNAL CONTROL DEVICE SETUP
RS-232C Setup
Connect the RS-232C (serial port) input jack to an
external control device (such as a computer or an A/V
control system) to control the product’s functions
externally.
Connect the serial port of the control device to the
RS-232C jack on the product back panel.
Note: RS-232C connection cables are not supplied
with the product.
Type of Connector; D-Sub 9-Pin Male
No.
Pin Name
1
2
3
4
5
6
7
8
9
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
1
5
6
9
No Connection
RS-232C Configurations
7-Wire Configurations (Standard RS-232C cable)
APPENDIX
116
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
8
7
D-Sub 9
D-Sub 9
TXD
RXD
GND
DSR
DTR
CTS
RTS
3-Wire Configurations(Not standard)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
7
8
D-Sub 9
D-Sub 9
TXD
RXD
GND
DTR
DSR
RTS
CTS
Set ID
Use this function to specify a set ID number.
Refer to ‘Real Data Mapping’. G p .121
OPTION
Move
OK
OPTION
OK
E
E
SIMPLINK
: On
SIMPLINK
: On
Key Lock
: Off
Key Lock
: Off
Set ID
ID
Set
::11
Simple Manual
Set ID
ID
Set
::11
ISM Method
: Normal
ISM Method
: Normal
Demo Mode
: On
Demo Mode
: On
Mode Setting
: Store Demo
Mode Setting
: Store Demo
Simple Manual
F
1
G
Close
Factory Reset
Factory Reset
1 MENU
Move
Select O P T I O N.
2
OK
3
OK
Select S e t I D.
Adjust Set ID to choose the desired TV ID number.
The adjustment range of SET ID is 1~99.
APPENDIX
• Press R E T U R N to move to the previous menu screen.
117
APPENDIX
Communication Parameters
Baud rate : 9600 bps (UART)
Data length : 8 bits
A Parity : None
Stop bit : 1 bit
Communication code : ASCII code
A Use a crossed (reverse) cable.
A
A
A
A
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
Command Reference List
COMMAND COMMAND
DATA
1
2
(Hexadecimal)
01. Power
02. Aspect Ratio
03. Screen Mute
04. Volume Mute
05. Volume Control
06. Contrast
07. Brightness
08. Colour
09. Tint
10. Sharpness
11. OSD Select
12. Remote control lock mode
13. Treble
14. Bass
15. Balance
16. Colour Temperature
17. ISM Method
18. Energy Saving
19. Auto Configuration
20. Tune Command
21. Programme Add/Skip
22. Key
23. Input select (Main)
APPENDIX
118
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
j
j
j
m
m
m
x
a
c
d
e
f
g
h
i
j
k
l
m
r
s
t
u
p
q
u
a
b
c
b
00 ~ 01
Refer to p. 119
00 ~ 01
00 ~ 01
00 ~ 64
00 ~ 64
00 ~ 64
00 ~ 64
00 ~ 64
00 ~ 64
00 ~ 01
00 ~ 01
00 ~ 64
00 ~ 64
00 ~ 64
00 ~ 02
Refer to p. 121
00 ~ 04
01
Refer to p. 121
00 ~ 01
Key Code
Refer to p. 122
* [Command 1] : First command to control the TV.
(j, k, m or x)
* [Command 2] : Second command to control the TV.
: You can adjust the set ID to choose
* [Set ID]
desired monitor ID number in option
menu. Adjustment range is 1 ~ 99.
When selecting Set ID ‘0’, every connected set is controlled.
Set ID is indicated as decimal (1~99) on
menu and as Hexa decimal (0x0~0x63)
on transmission/receiving protocol.
: To transmit command data.
* [DATA]
Transmit ‘FF’ data to read status of command.
: Carriage Return
* [Cr]
ASCII code ‘0x0D’
[
]
:
ASCII
code ‘space (0x20)’
*
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The set transmits ACK (acknowledgement) based on
this format when receiving normal data. At this time, if
the data is data read mode, it indicates present status
data. If the data is data write mode, it returns the
data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* The set transmits ACK (acknowledgement) based on
* When setting the 17 ~ 23, a menu does not appear on screen. this format when receiving abnormal data from
* Note : During USB operations such as Dvix or EMF, all commands except Power(ka) and Key(mc) are not executed and
non-viable functions or communication errors.
treated as NG.
Data 00: Illegal Code
APPENDIX
01. Power (Command: k a)
0 4 . V o l u m e M u t e (C o m m a n d : k e )
G To control Power On/Off of the set.
G To control volume mute on/off.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
You can also adjust mute using the MUTE button on
remote control.
Transmission
Data 00 : Power Off
Ack
[k][e][ ][Set ID][ ][Data][Cr]
01 : Power On
G To show Power On/Off.
Data 00 : Volume mute on (Volume off)
01 : Volume mute off (Volume on)
Ack
Transmission
[e][ ][Set ID][ ][OK/NG][Data][x]
[a][ ][Set ID][ ][OK/NG][Data][x]
[k][a][ ][Set ID][ ][FF][Cr]
0 5 . V o l u m e C o n t r o l (C o m m a n d : k f )
Ack
G To adjust volume.
[a][ ][Set ID][ ][OK/NG][Data][x]
* Similarly, if other functions transmit ‘0xFF’ data based
on this format, Acknowledgement data feed back presents status about each function.
* OK Ack., Error Ack. and other message may display on
the screen when TV is power On.
0 2 . A s p e c t R a t i o (C o m m a n d : k c ) ( M a i n P i c t u r e S i z e )
G To adjust the screen format. (Main picture format)
You can also adjust the screen format using the
A s p e c t R a t i o in the Q.MENU. or PICTURE menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 01
02
04
06
Ack
:
:
:
:
Normal screen (4:3)
Wide screen (16:9)
Zoom
Original
07 : 14:9
09 : Just Scan
10~1F : Cinema Zoom 1~16
You can also adjust volume with the VOLUME buttons on
remote control.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 121.
Ack
[f][ ][Set ID][ ][OK/NG][Data][x]
0 6 . C o n t r a s t (C o m m a n d : k g )
G To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 121.
Ack
[g][ ][Set ID][ ][OK/NG][Data][x]
[c][ ][Set ID][ ][OK/NG][Data][x]
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
* In DTV/HDMI (1080i 50Hz/60Hz, 720p 50Hz/60Hz,
1080p 24Hz/30Hz/50Hz/60Hz), Component( 720p,
1080i, 1080p 50Hz/60Hz) mode, Just Scan is available.
0 3 . S c r e e n M u t e (C o m m a n d : k d )
0 7 . B r i g h t n e s s (C o m m a n d : k h )
G To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’ See page 121.
Ack
[h][ ][Set ID][ ][OK/NG][Data][x]
Transmission
0 8 . C o l o u r (C o m m a n d : k i )
G To adjust the screen colour.
You can also adjust colour in the PICTURE menu.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 00 : Screen mute off (Picture on)
Video mute off
01 : Screen mute on (Picture off)
10 : Video mute on
Ack
[d][ ][Set ID][ ][OK/NG][Data][x]
* In case of video mute on only, TV will display On Screen
Display(OSD). But, in case of Screen mute on, TV will not
display OSD.
[k][i][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 121.
Ack
APPENDIX
G To select screen mute on/off.
[i][ ][Set ID][ ][OK/NG][Data][x]
119
APPENDIX
0 9 . T i n t (C o m m a n d : k j )
G To adjust the screen tint.
You can also adjust tint in the PICTURE menu.
13. Treble (Command: k r)
G To adjust treble.
Transmission
You can also adjust treble in the AUDIO menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
[k][r][ ][Set ID][ ][Data][Cr]
Data Red : 00 ~ Green : 64
* Refer to ‘Real data mapping 1’. See page 121.
Ack
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’ See page 121.
[j][ ][Set ID][ ][OK/NG][Data][x]
Ack
[r][ ][Set ID][ ][OK/NG][Data][x]
1 4 . Bass (Command: k s)
1 0 . S h a r p n e s s (C o m m a n d : k k )
G To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’ See page 121.
Ack
[k][ ][Set ID][ ][OK/NG][Data][x]
G To adjust bass.
You can also adjust bass in the AUDIO menu.
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’ See page 121.
Ack
[s][ ][Set ID][ ][OK/NG][Data][x]
1 5 . B a l a n c e (C o m m a n d : k t )
G To adjust balance.
1 1 . O S D S e l e c t (C o m m a n d : k l )
G To select OSD (On Screen Display) on/off when controlling remotely.
You can also adjust balance in the AUDIO menu.
Transmission
Transmission
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 121.
Ack
[k][l][ ][Set ID][ ][Data][Cr]
Data 00 : OSD off
Ack
01 : OSD on
[k][t][ ][Set ID][ ][Data][Cr]
[t][ ][Set ID][ ][OK/NG][Data][x]
[l][ ][Set ID][ ][OK/NG][Data][x]
1 6 . C o l o u r T e m p e r a t u r e (C o m m a n d : k u )
1 2 . Remote control lock mode ( C o m m a n d : k m )
G To lock the front panel controls on the monitor and
remote control.
Transmission
APPENDIX
120
Temperature in the PICTURE menu.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
[k][m][ ][Set ID][ ][Data][Cr]
Data 00 : Lock off
Ack
G To adjust colour temperature. You can also adjust Colour
01 : Lock on
[m][ ][Set ID][ ][OK/NG][Data][x]
* If you are not using the remote control, use this mode.
When main power is on/off, external control lock is
released.
* Local Power Key will work properly.
Data 00: Medium 01:Cool
Ack
02: Warm
[u][ ][Set ID][ ][OK/NG][Data][x]
17. ISM Method (Command: j p)
19. Auto Configure(Command: j u)
G To adjust picture position and minimize image shaking
G To control the ISM method. You can also adjust ISM
Method in OPTION menu.
Transmission
automatically. It works only in RGB (PC) mode.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
[j][p][ ][Set ID][ ][Data][Cr]
Data 01: To set
Ack
Data 02: Orbiter
04: White wash
08: Normal
20: Colour Wash
[u][ ][Set ID][ ][OK/NG][Data][x]
20.Tune Command (Command: m a)
Ack
G Select channel to following physical number.
[p][ ][Set ID][ ][OK/NG][Data][x]
Transmission
[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr]
18. Energy Saving (Command: j q)
G To reduce the power consumption of the TV. You can also
adjust Energy Saving in OPTION menu.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Power Saving
Function
Level
Description
7 6 5 4
3 2 1 0
0 0 0 0 Low Power
0 0 0 0
Off
0 0 0 0 Low Power
0 0 0 1
Minimum
0 0 0 0 Low Power
0 0 1 0
Medium
0 0 0 0 Low Power
0 0 1 1
Maximum
0 0 0 1 Intelligent Sensor 0 0 0 0
Low
0 0 0 1 Intelligent Sensor 0 0 0 1
Middle
0 0 0 1 Intelligent Sensor 0 0 1 0
High
Ack
[q][ ][Set ID][ ][OK/NG][Data][x]
Data00 : High channel data
Data01 : Low channel data
ex. No. 47 -> 00 2F (2FH)
No. 394 -> 01 8A (18AH),
DTV No. 0 -> Don’t care
Data020x00 : Analogue Main
0x10 : DTV Main
0x20 : Radio
Channel data range
Analogue - Min: 00 ~ Max: 63 (0~99)
Digital - Min: 00 ~ Max: 3E7 (0~999)
Ack
[a][ ][Set ID][ ][OK/NG][Data][x]
Data Min: 00 ~ Max: 7DH
21. Programme Add/Skip(Command: m b)
G To set skip status for the current Programme.
Transmission
[m][b][ ][Set ID][ ][Data][Cr]
Data 00 : Skip
01 : Add
Ack
[b][ ][Set ID][ ][OK/NG][Data][x]
* Real data mapping 1
00 :
Step 0
A : Step 10 (Set ID 10)
F : Step 15 (Set ID 15)
10 : Step 16 (Set ID 16)
64 : Step 100
73 : Step 115
74 : Step 116
C7: Step 199
28 :0
4E : +38
4F : +39
50 : +40
APPENDIX
6E : Step 110
* Real data mapping 2
00 :-40
01 :-39
02 :-38
FE : Step 254
FF : Step 255
121
APPENDIX
22. Key(Command: m c)
G To send IR remote key code.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data Key code - Refer to page 151.
Ack
[c][ ][Set ID][ ][OK/NG][Data][x]
2 3 . I n p u t s e l e c t (C o m m a n d : x b )
(Main Picture Input)
G To select input source for main picture.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data Structure
MSB
0
LSB
0
0
0
0
0
0
External Input
Input Number
External Input
Data
0
0
0
0
DTV
0
0
0
1
Analogue
0
0
1
0
AV
0
1
0
0
Component
0
1
1
0
RGB
1
0
0
1
HDMI
Input Number
Data
0
0
0
0
Input1
0
0
0
1
Input2
0
0
1
0
Input3
0
0
1
1
Input4
Ack
[b][ ][Set ID][ ][OK/NG][Data][x]
APPENDIX
122
0
Open source software notice
The following GPL executables and LGPL/MPL libraries used in this product are subject to the
GPL2.0/LGPL2.1/MPL1.1 License Agreements:
GPL EXECUTABLES:
• Linux kernel 2.6
• busybox
• lzo
LGPL LIBRARIES:
• uClibc
MPL LIBRARIES:
• Nanox
LG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of performing
such distribution, such as the cost of media, shipping and handling upon e-mail request to LG Electronics at:
opensource@lge.com
This offer is valid for a period of three(3) years from the date of the distribution of this product by LG
Electronics.
You can obtain a copy of the GPL, LGPL, MPL licenses from http://www.gnu.org/licenses/old-licenses/gpl2.0.html, http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html, http://www.mozilla.org/MPL/MPL-1.1.html.
Also you can obtain the translation of GPL, LGPL licenses from http://www.gnu.org/licenses/old-licenses/gpl2.0-translations.html, http://www.gnu.org/licenses/old-licenses/lgpl-2.1-translations.html.
This software is based in part on the work of the Independent JPEG Group copyright © 1991 – 1998, Thomas
G. Lane.
This product includes
• libpng library : copyright © 2004 Glenn Randers-Pehrson
• Zlib compression library: Copyright © 1995-2002 Jean-loup Gailly and Mark Adler.
• Tinyxml library : copyright (c) 2000-2006 Lee Thomason
APPENDIX
123
APPENDIX
OPEN SOURCE LICENSE
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU
General Public License is intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users. This General Public License applies to most of the Free
Software Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License
instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to
make sure that you have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it if you want it, that you can change the software or
use pieces of it in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software,
or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all
the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show
them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal
permission to copy, distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so that any problems introduced by others will not
reflect on the original authors' reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors
of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we
have made it clear that any patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
APPENDIX
124
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it
may be distributed under the terms of this General Public License. The "Program", below, refers to any such program
or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that
is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into
another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is
addressed as "you".
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope.
The act of running the Program is not restricted, and the output from the Program
is covered only if its contents constitute a work based on the Program (independent of having been made by running
the Program). Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of
any warranty; and give any other recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in
exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the
Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you
also meet all of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any
change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the
Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this
License.
c) If the modified program normally reads commands interactively when run, you must cause it, when started running
for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may
redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception:
if the Program itself is interactive but does not normally print such an announcement, your work based on the
Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the
Program, and can be reasonably considered independent and separate works in themselves, then this License, and its
terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same
sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on
the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this
License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable
form under the terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under
the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than
your cost of physically performing source distribution, a complete machine-readable copy of the corresponding
source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software
interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This
alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.)
APPENDIX
The source code for a work means the preferred form of the work for making modifications to it. For an executable
work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs,
unless that component itself accompanies the executable.
125
APPENDIX
If distribution of executable or object code is made by offering access to copy from a designated place, then offering
equivalent access to copy the source code from the same place counts as distribution of the source code, even though
third parties are not compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License.
Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate
your rights under this License. However, parties who have received copies, or rights, from you under this License will
not have their licenses terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not ccept
this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate
your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the
Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a
license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You
may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible
for enforcing compliance by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you
may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the
Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it
and this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest
validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution
system, which is implemented by public license practices. Many people have made generous contributions to the wide
range of software distributed through that system in reliance on consistent application of that system; it is up to the
author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Program under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to
time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems
or concerns.
Each version is given a distinguishing version number. If the Program specifies a version number of this License which
applies to it and "any later version", you have the option of following the terms and conditions either of that version or of
any later version published by the Free Software Foundation. If the Program does not specify a version number of
this License, you may choose any version ever published by the Free Software Foundation.
APPENDIX
126
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different,
write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to
the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals
of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software
generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING
THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE
QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING
BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to
achieve this is to make it free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most
effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to
where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public
License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later
version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the
implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the
Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions;
type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License.
Of course, the commands you use may be called something other than `show w' and `show c'; they could even be
mouse-clicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer"
for the program, if necessary. Here is a sample; alter the names:
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
APPENDIX
Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker.
This General Public License does not permit incorporating your program into proprietary programs. If your program is a
subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is
what you want to do, use the GNU Lesser General Public License instead of this License.
127
APPENDIX
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301
USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not
allowed.
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public
License, version 2, hence the version number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU
General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the
software is free for all its users.
This license, the Lesser General Public License, applies to some specially designated software packages--typically
libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest
you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in
any particular case, based on the explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are
designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you
wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of
it in new free programs; and that you are informed that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to
surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the
library or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the
rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code
with the library, you must provide complete object files to the recipients, so that they can relink them with the library
after making changes to the library and recompiling it. And you must show them these terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which
gives you legal permission to copy, distribute and/or modify the library.
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the
library is modified by someone else and passed on, the recipients should know that what they have is not the original
version, so that the original author's reputation will not be affected by problems that might be introduced by others.
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a
company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder.
Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom
of use specified in this license.
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license,
the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary
General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free
programs.
When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits
such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more
lax criteria for linking other code with the library.
APPENDIX
We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the
ordinary General Public License. It also provides other free software developers Less of an advantage over competing
non-free programs. These disadvantages are the reason we use the ordinary General Public License for many
libraries. However, the Lesser license provides advantages in certain special circumstances.
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library,
so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more
frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to
gain by limiting the free library to free software only, so we use the Lesser General Public License.
In other cases, permission to use a particular library in non-free programs enables a greater number of people to use
a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many
more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.
128
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a
program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library.
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library". The former contains code derived from
the library, whereas the latter must be combined with the library in order to run.
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other program which contains a notice placed by the
copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public
License (also called "this License"). Each licensee is addressed as "you".
A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables.
The "Library", below, refers to any such software library or work which has been distributed under these terms. A
"work based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work
containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into
another language. (Hereinafter, translation is included without limitation in the term "modification".)
"Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete
source code means all the source code for all modules it contains, plus any associated interface definition files, plus
the scripts used to control compilation and installation of the library.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope.
The act of running a program using the Library is not restricted, and output from such a program is covered only if its
contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether
that is true depends on what the Library does and what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection
in exchange for a fee.
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library,
and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all
of these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of
any change.
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this
License.
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program
that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good
faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates,
and performs whatever part of its purpose remains meaningful.
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the
Library, and can be reasonably considered independent and separate works in themselves, then this License, and its
terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same
sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
APPENDIX
(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of
the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function
must be optional: if the application does not supply it, the square root function must still compute square roots.)
129
APPENDIX
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of derivative or collective works based on the Library.
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the
Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy
of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU
General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU
General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other
change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License
applies to all subsequent copies and derivative works made from that copy.
This option is useful when you wish to copy part of the code of the Library into a program that is not a library.
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a
medium customarily used for software interchange.
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent
access to copy the source code from the same place satisfies the requirement to distribute the source code, even
though third parties are not compelled to copy the source along with the object code.
5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being
compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative work of
the Library, and therefore falls outside the scope of this License.
However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library
(because it contains portions of the Library), rather than a "work that uses the library". The executable is therefore covered by this License. Section 6 states terms for distribution of such executables.
When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the
work may be a derivative work of the Library even though the source code is not.
Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library.
The threshold for this to be true is not precisely defined by law.
If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and
small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it
is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under
Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of
Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with
the Library itself.
6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library
to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that
the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications.
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its
use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the
user to the copy of this License. Also, you must do one of these things:
APPENDIX
130
a) Accompany the work with the complete corresponding machine-readable source code for the Library including
whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work
is an executable linked with the Library, with the complete machine-readable "work that uses the Library", as object
code and/or source code, so that the user can modify the Library and then relink to produce a modified executable
containing the modified Library. (It is understood that the user who changes the contents of definitions files in the
Library will not necessarily be able to recompile the application to use the modified definitions.)
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at
run time a copy of the library already present on the user's computer system, rather than copying library functions
into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as
long as the modified version is interface-compatible with the version that the work was made with.
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials
specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution.
d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to
copy the above specified materials from the same place.
e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.
For an executable, the required form of the "work that uses the Library" must include any data and utility programs
needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need
not include anything that is normally distributed (in either source or binary form) with the major components (compiler,
kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies
the executable.
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in
an executable that you distribute.
7. You may place library facilities that are a work based on the Library side-by-side in a single library together with
other library facilities not covered by this License, and distribute such a combined library, provided that the separate
distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that
you do these two things:
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other
library facilities. This must be distributed under the terms of the Sections above.
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and
explaining where to find the accompanying uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this
License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under
this License will not have their licenses terminated so long as such parties remain in full compliance.
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept
this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your
acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or
works based on it.
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a
license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties with this License.
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you
may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the
Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and
this License would be to refrain entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if written in the body of this License.
APPENDIX
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest
validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution
system which is implemented by public license practices. Many people have made generous contributions to the wide
range of software distributed through that system in reliance on consistent application of that system; it is up to the
author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot
impose that choice.
131
APPENDIX
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License
from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address
new problems or concerns.
Each version is given a distinguishing version number. If the Library specifies a version number of this License which
applies to it and "any later version", you have the option of following the terms and conditions either of that version or of
any later version published by the Free Software Foundation. If the Library does not specify a license version number,
you may choose any version ever published by the Free Software Foundation.
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software
Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing
and reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY,
TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF
ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY
AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU
ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT
NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU
OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries
If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it
free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms
(or, alternatively, under the terms of the ordinary General Public License).
To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source
file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a
pointer to where the full notice is found.
<one line to give the library's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General
Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option)
any later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General
Public License for more details.
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to
the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
APPENDIX
Also add information on how to contact you by electronic and paper mail.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer"
for the library, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a library for tweaking knobs) written by
James Random Hacker.
132
<signature of Ty Coon>, 1 April 1990
Ty Coon, President of Vice
MOZILLA PUBLIC LICENSE
Version 1.1
--------------1. Definitions.
1.0.1. "Commercial Use" means distribution or otherwise making the Covered Code available to a third party.
1.1. "Contributor" means each entity that creates or contributes to the creation of Modifications.
1.2. "Contributor Version" means the combination of the Original Code, prior Modifications used by a Contributor,
and the Modifications made by that particular Contributor.
1.3. "Covered Code" means the Original Code or Modifications or the combination of the Original Code and
Modifications, in each case including portions thereof.
1.4. "Electronic Distribution Mechanism" means a mechanism generally accepted in the software development community for the electronic transfer of data.
1.5. "Executable" means Covered Code in any form other than Source Code.
1.6. "Initial Developer" means the individual or entity identified as the Initial Developer in the Source Code notice
required by Exhibit A.
1.7. "Larger Work" means a work which combines Covered Code or portions thereof with code not governed by the
terms of this License.
1.8. "License" means this document.
1.8.1. "Licensable" means having the right to grant, to the maximum extent possible, whether at the time of the initial grant or subsequently acquired, any and all of the rights conveyed herein.
1.9. "Modifications" means any addition to or deletion from the substance or structure of either the Original Code or
any previous Modifications. When Covered Code is released as a series of files, a Modification is:
A. Any addition to or deletion from the contents of a file containing Original Code or previous Modifications.
B. Any new file that contains any part of the Original Code or previous Modifications.
1.10. "Original Code" means Source Code of computer software code which is described in the Source Code notice
required by Exhibit A as Original Code, and which, at the time of its release under this License is not already
Covered Code governed by this License.
1.10.1. "Patent Claims" means any patent claim(s), now owned or hereafter acquired, including without limitation,
method, process, and apparatus claims, in any patent Licensable by grantor.
1.11. "Source Code" means the preferred form of the Covered Code for making modifications to it, including all
modules it contains, plus any associated interface definition files, scripts used to control compilation and installation
of an Executable, or source code differential comparisons against either the Original Code or another well known,
available Covered Code of the Contributor's choice. The Source Code can be in a compressed or archival form,
provided the appropriate decompression or de-archiving software is widely available for no charge.
1.12. "You" (or "Your") means an individual or a legal entity exercising rights under, and complying with all of the
terms of, this License or a future version of this License issued under Section 6.1.
For legal entities, "You" includes any entity which controls, is controlled by, or is under common control with You.
For purposes of this definition, "control" means (a) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (b) ownership of more than fifty percent (50%) of the outstanding shares or beneficial ownership of such entity.
2.1. The Initial Developer Grant.
The Initial Developer hereby grants You a world-wide, royalty-free, non-exclusive license, subject to third party intellectual property claims:
(a) under intellectual property rights (other than patent or trademark) Licensable by Initial Developer to use,
reproduce, modify, display, perform, sublicense and distribute the Original Code (or portions thereof) with or
without Modifications, and/or as part of a Larger Work; and
APPENDIX
2. Source Code License.
133
APPENDIX
(b) under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use,
practice, sell, and offer for sale, and/or otherwise dispose of the Original Code (or portions thereof).
(c) the licenses granted in this Section 2.1(a) and (b) are effective on the date Initial Developer first distributes
Original Code under the terms of this License.
(d) Notwithstanding Section 2.1(b) above, no patent license is granted: 1) for code that You delete from the
Original Code; 2) separate from the Original Code; or 3) for infringements caused by: i) the modification of the
Original Code or ii) the combination of the Original Code with other software or devices.
2.2. Contributor Grant.
Subject to third party intellectual property claims, each Contributor hereby grants You a world-wide, royalty-free,
non-exclusive license
(a) under intellectual property rights (other than patent or trademark) Licensable by Contributor, to use, reproduce, modify, display, perform, sublicense and distribute the Modifications created by such Contributor (or portions thereof) either on an unmodified basis, with other Modifications, as Covered Code and/or as part of a
Larger Work; and
(b) under Patent Claims infringed by the making, using, or selling of Modifications made by that Contributor
either alone and/or in combination with its Contributor Version (or portions of such combination), to make, use,
sell, offer for sale, have made, and/or otherwise dispose of: 1) Modifications made by that Contributor (or portions
thereof); and 2) the combination of Modifications made by that Contributor with its Contributor Version (or portions of such combination).
(c) the licenses granted in Sections 2.2(a) and 2.2(b) are effective on the date Contributor first makes
Commercial Use of the Covered Code.
(d) Notwithstanding Section 2.2(b) above, no patent license is granted: 1) for any code that Contributor has deleted from the Contributor Version; 2) separate from the Contributor Version; 3) for infringements caused by: i)
third party modifications of Contributor Version or ii) the combination of Modifications made by that Contributor
with other software (except as part of the Contributor Version) or other devices; or 4) under Patent Claims
infringed by Covered Code in the absence of Modifications made by that Contributor.
3. Distribution Obligations.
3.1. Application of License.
The Modifications which You create or to which You contribute are governed by the terms of this License, including
without limitation Section 2.2. The Source Code version of Covered Code may be distributed only under the terms of
this License or a future version of this License released under Section 6.1, and You must include a copy of this
License with every copy of the Source Code You distribute. You may not offer or impose any terms on any Source
Code version that alters or restricts the applicable version of this License or the recipients' rights hereunder.
However, You may include an additional document offering the additional rights described in Section 3.5.
3.2. Availability of Source Code.
Any Modification which You create or to which You contribute must be made available in Source Code form under
the terms of this License either on the same media as an Executable version or via an accepted Electronic
Distribution Mechanism to anyone to whom you made an Executable version available; and if made available via
Electronic Distribution Mechanism, must remain available for at least twelve (12) months after the date it initially
became available, or at least six (6) months after a subsequent version of that particular Modification has been
made available to such recipients. You are responsible for ensuring that the Source Code version remains available
even if the
Electronic Distribution Mechanism is maintained by a third party.
3.3. Description of Modifications.
You must cause all Covered Code to which You contribute to contain a file documenting the changes You made to
create that Covered Code and the date of any change. You must include a prominent statement that the Modification
is derived, directly or indirectly, from Original Code provided by the Initial Developer and including the name of the
Initial Developer in (a) the Source Code, and (b) in any notice in an Executable version or related documentation in
which You describe the origin or ownership of the Covered Code.
APPENDIX
134
3.4. Intellectual Property Matters
(a) Third Party Claims.
If Contributor has knowledge that a license under a third party's intellectual property rights is required to exercise
the rights granted by such Contributor under Sections 2.1 or 2.2, Contributor must include a text file with the
Source Code distribution titled "LEGAL" which describes the claim and the party making the claim in sufficient
detail that a recipient will know whom to contact. If Contributor obtains such knowledge after the Modification is
made available as described in Section 3.2, Contributor shall promptly modify the LEGAL file in all copies
Contributor makes available thereafter and shall take other steps (such as notifying appropriate mailing lists or
newsgroups) reasonably calculated to inform those who received the Covered Code that new knowledge has
been obtained.
(b) Contributor APIs.
If Contributor's Modifications include an application programming interface and Contributor has knowledge of
patent licenses which are reasonably necessary to implement that API, Contributor must also include this information in the LEGAL file.
(c) Representations.
Contributor represents that, except as disclosed pursuant to Section 3.4(a) above, Contributor believes that
Contributor's Modifications are Contributor's original creation(s) and/or Contributor has sufficient rights to grant
the rights conveyed by this License.
3.5. Required Notices.
You must duplicate the notice in Exhibit A in each file of the Source Code. If it is not possible to put such notice in a
particular Source Code file due to its structure, then You must include such notice in a location (such as a relevant
directory) where a user would be likely to look for such a notice. If You created one or more Modification(s)
You may add your name as a Contributor to the notice described in Exhibit A. You must also duplicate this License
in any documentation for the Source Code where You describe recipients' rights or ownership rights relating to
Covered Code. You may choose to offer, and to charge a fee for, warranty, support, indemnity or liability obligations
to one or more recipients of Covered Code. However, You may do so only on Your own behalf, and not on behalf of
the Initial
Developer or any Contributor. You must make it absolutely clear than any such warranty, support, indemnity or liability obligation is offered by You alone, and You hereby agree to indemnify the Initial Developer and every Contributor
for any liability incurred by the Initial Developer or such Contributor as a result of warranty, support, indemnity or liability terms You offer.
3.6. Distribution of Executable Versions.
You may distribute Covered Code in Executable form only if the requirements of Section 3.1-3.5 have been met for
that Covered Code, and if You include a notice stating that the Source Code version of the Covered Code is available under the terms of this License, including a description of how and where You have fulfilled the obligations of
Section 3.2. The notice must be conspicuously included in any notice in an Executable version, related documentation or collateral in which You describe recipients' rights relating to the Covered Code. You may distribute the
Executable version of Covered Code or ownership rights under a license of Your choice, which may contain terms
different from this License, provided that You are in compliance with the terms of this License and that the license
for the Executable version does not attempt to limit or alter the recipient's rights in the Source Code version from
the rights set forth in this
License. If You distribute the Executable version under a different license You must make it absolutely clear that any
terms which differ from this License are offered by You alone, not by the Initial Developer or any Contributor. You
hereby agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial
Developer or such Contributor as a result of any such terms You offer.
3.7. Larger Works.
You may create a Larger Work by combining Covered Code with other code not governed by the terms of this
License and distribute the Larger Work as a single product. In such a case, You must make sure the requirements
of this License are fulfilled for the Covered Code.
4. Inability to Comply Due to Statute or Regulation.
If it is impossible for You to comply with any of the terms of this License with respect to some or all of the Covered
Code due to statute, judicial order, or regulation then You must: (a) comply with the terms of this License to the maximum extent possible; and (b) describe the limitations and the code they affect. Such description must be included in
the LEGAL file described in Section 3.4 and must be included with all distributions of the Source Code. Except to
the
extent prohibited by statute or regulation, such description must be sufficiently detailed for a recipient of ordinary
skill to be able to understand it.
5. Application of this License.
This License applies to code to which the Initial Developer has attached the notice in Exhibit A and to related
Covered Code.
6. Versions of the License.
6.2. Effect of New Versions.
Once Covered Code has been published under a particular version of the License, You may always continue to use
it under the terms of that version. You may also choose to use such Covered Code under the terms of any subsequent version of the License published by Netscape. No one other than Netscape has the right to modify the terms
applicable to Covered Code created under this License.
APPENDIX
6.1. New Versions.
Netscape Communications Corporation ("Netscape") may publish revised and/or new versions of the License from
time to time. Each version will be given a distinguishing version number.
135
APPENDIX
6.3. Derivative Works.
If You create or use a modified version of this License (which you may only do in order to apply it to code which is
not already Covered Code governed by this License), You must (a) rename Your license so that the phrases
"Mozilla", "MOZILLAPL", "MOZPL", "Netscape", "MPL", "NPL" or any confusingly similar phrase do not appear in
your license (except to note that your license differs from this License) and (b) otherwise make it clear that Your version of the license contains terms which differ from the Mozilla Public License and Netscape Public License. (Filling
in the name of the Initial Developer, Original Code or Contributor in the notice described in Exhibit A shall not of
themselves be deemed to be modifications of this License.)
7. DISCLAIMER OF WARRANTY.
COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE IS WITH YOU.
SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL DEVELOPER OR
ANY OTHER CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION.
THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY
COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER.
8. TERMINATION.
8.1. This License and the rights granted hereunder will terminate automatically if You fail to comply with terms herein and fail to cure such breach within 30 days of becoming aware of the breach. All sublicenses to the Covered
Code which are properly granted shall survive any termination of this License. Provisions which, by their nature,
must remain in effect beyond the termination of this License shall survive.
8.2. If You initiate litigation by asserting a patent infringement claim (excluding declatory judgment actions) against
Initial Developer or a Contributor (the Initial Developer or Contributor against whom You file such action is referred
to as "Participant") alleging that:
(a) such Participant's Contributor Version directly or indirectly infringes any patent, then any and all rights granted
by such Participant to You under Sections 2.1 and/or 2.2 of this License shall, upon 60 days notice from Participant
terminate prospectively, unless if within 60 days after receipt of notice You either: (i) agree in writing to pay
Participant a mutually agreeable reasonable royalty for Your past and future use of Modifications made by such
Participant, or (ii) withdraw Your litigation claim with respect to the Contributor Version against such Participant. If
within 60 days of notice, a reasonable royalty and payment arrangement are not mutually agreed upon in writing by
the parties or the litigation claim is not withdrawn, the rights granted by Participant to You under Sections 2.1 and/or
2.2 automatically terminate at the expiration of the 60 day notice period specified above.
(b) any software, hardware, or device, other than such Participant's Contributor Version, directly or indirectly
infringes any patent, then any rights granted to You by such Participant under Sections 2.1(b) and 2.2(b) are
revoked effective as of the date You first made, used, sold, distributed, or had made, Modifications made by that
Participant.
8.3. If You assert a patent infringement claim against Participant alleging that such Participant's Contributor Version
directly or indirectly infringes any patent where such claim is resolved (such as by license or settlement) prior to the
initiation of patent infringement litigation, then the reasonable value of the licenses granted by such Participant
under Sections 2.1 or 2.2 shall be taken into account in determining the amount or value of any payment or license.
8.4. In the event of termination under Sections 8.1 or 8.2 above, all end user license agreements (excluding distributors and resellers) which have been validly granted by You or any distributor hereunder prior to termination shall
survive termination.
9. LIMITATION OF LIABILITY.
APPENDIX
136
UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL DEVELOPER, ANY OTHER CONTRIBUTOR, OR
ANY DISTRIBUTOR OF COVERED CODE,OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY
PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER
INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER
FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH
PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULTING FROM SUCH PARTY'S
NEGLIGENCE TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO
NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS
EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU.
10. U.S. GOVERNMENT END USERS.
The Covered Code is a "commercial item," as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of
"commercial computer software" and "commercial computer software documentation," as such terms are used in 48
C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June
1995), all U.S. Government End Users acquire Covered Code with only those rights set forth herein.
11. MISCELLANEOUS.
This License represents the complete agreement concerning subject matter hereof. If any provision of this License
is held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This
License shall be governed by California law provisions (except to the extent applicable law, if any, provides otherwise),
excluding its conflict-of-law provisions. With respect to disputes in which at least one party is a citizen of, or an entity
chartered or registered to do business in the United States of America, any litigation relating to this License shall be
subject to the jurisdiction of the Federal Courts of the Northern District of California, with venue lying in Santa Clara
County, California, with the losing party responsible for costs, including without limitation, court costs and reasonable
attorneys' fees and expenses. The application of the United Nations Convention on Contracts for the International Sale
of Goods is expressly excluded. Any law or regulation which provides that the language of a contract shall be construed
against the drafter shall not apply to this License.
12. RESPONSIBILITY FOR CLAIMS.
As between Initial Developer and the Contributors, each party is responsible for claims and damages arising, directly or indirectly, out of its utilization of rights under this License and You agree to work with Initial Developer and
Contributors to distribute such responsibility on an equitable basis. Nothing herein is intended or shall be deemed to
constitute any admission of liability.
13. MULTIPLE-LICENSED CODE.
Initial Developer may designate portions of the Covered Code as "Multiple-Licensed". "Multiple-Licensed" means
that the Initial Developer permits you to utilize portions of the Covered Code under Your choice of the NPL or the alternative licenses, if any, specified by the Initial Developer in the file described in Exhibit A.
EXHIBIT A -Mozilla Public License.
``The contents of this file are subject to the Mozilla Public License Version 1.1 (the "License"); you may not use this
file except in compliance with the License. You may obtain a copy of the License at http://www.mozilla.org/MPL/
Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND,
either express or implied. See the License for the specific language governing rights and limitations under the License.
The Original Code is ______________________________________.
The Initial Developer of the Original Code is ________________________.
Portions created by ______________________ are Copyright (C) ______
_______________________. All Rights Reserved.
Contributor(s): ______________________________________.
[NOTE: The text of this Exhibit A may differ slightly from the text of the notices in the Source Code files of the
Original Code. You should use the text of this Exhibit A rather than the text found in the Original Code Source Code for
Your Modifications.]
APPENDIX
Alternatively, the contents of this file may be used under the terms of the _____ license (the "[___] License"), in
which case the provisions of [______] License are applicable instead of those above. If you wish to allow use of your
version of this file only under the terms of the [____] License and not to allow others to use your version of this file
under the MPL, indicate your decision by deleting the provisions above and replace them with the notice and other
provisions required by the [___] License. If you do not delete the provisions above, a recipient may use your version of
this file under either the MPL or the [___] License."
137
Download PDF

advertising