OWNER’S MANUAL
Micro Hi-Fi System
Please read this manual carefully before operating
your set and retain it for future reference.
XP16DAB(XP16DAB, XPS16F)
P/NO : MFL67307508
XP16DAB-AAUSLLK-ENG.indd 1
11. 08. 16
3:06
2
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within
an equilateral triangle is
intended to alert the user to the
presence of important operating
and maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
XP16DAB-AAUSLLK-ENG.indd 2
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service centre.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try
to open the enclosure. Visible laser radiation when
open. DO NOT STARE INTO BEAM.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
centre. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
11. 08. 16
3:06
Getting Started
This device is equipped with a portable battery or
accumulator.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
Disposal of your old appliance
1. When this crossed-out wheeled bin
symbol is attached to a product it
means the product is covered by
the European Directive 2002/96/EC.
LG Electronics hereby declares that this/
these product(s) is/are in compliance
with the essential requirements and
other relevant provisions of Directive
2004/108/EC, 2006/95/EC, and
2009/125/EC.
European representative :
LG Electronics Service Europe B.V.
Veluwezoom 15, 1327 AE Almere, The
Netherlands (Tel : +31–(0)36–547–8888)
1
Getting Started
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
3
y The appliance is not intended for use by young
children or infirm persons without supervision.
y Young Children should be supervised to ensure
that they do not play with appliance.
y If the appliance is supplied from a cord
extension set or an electrical portable outlet
device, the cord extension set on electrical
portable outlet device must be positioned so
that it is not subject to splashing or ingress of
moisture.
2. All electrical and electronic products
should be disposed of separately
from the municipal waste stream
via designated collection facilities
appointed by the government or
the local authorities.
3. The correct disposal of your
old appliance will help prevent
potential negative consequences
for the environment and human
health.
4. For more detailed information about
disposal of your old appliance,
please contact your city office,
waste disposal service or the shop
where you purchased the product.
XP16DAB-AAUSLLK-ENG.indd 3
11. 08. 16
3:06
4
Table of Contents
Table of Contents
1
Getting Started
2
5
5
5
5
5
5
6
7
7
Safety Information
Unique Features
Accessories
Playable file Requirement
– MP3/WMA music file requirement
– Compatible USB Devices
– USB device requirement
Remote control
Front panel
Rear panel
2
Connecting
8
8
8
8
8
Connecting to speakers
– Attaching the speakers to the unit
Optional Equipment Connection
– USB Connection
– PORT. IN Connection
3
Operating
9
9
9
10
10
10
Basic Operations
– CD/ USB Operations
– Selecting a folder
Other Operations
– Programmed Playback
– Displaying file information
(ID3 TAG)
– Turn off the sound temporarily
Radio Operations
– Listening to the radio
– Presetting the Radio Stations
– Deleting all the saved stations
– Improving poor FM reception
– Listening to the DAB
– Aligning the service names
– DAB scan
– Deleting all of the saved DAB scan
stations
Sound adjustment
– Setting the surround mode
10
10
10
10
10
11
11
11
11
11
11
11
XP16DAB-AAUSLLK-ENG.indd 4
12
12
13
13
13
13
Advanced Operations
– Compatible iPod/iPhone
– Listening to music from your external
device
– Recording to USB
– Pausing recording
– To select recording bit rate and speed
4
Troubleshooting
15
Troubleshooting
5
Appendix
16
17
17
17
17
Specifications
Maintenance
– Handling the Unit
– Notes on Discs
Trademarks and Licenses
11. 08. 16
3:06
Getting Started
Unique Features
5
Compatible USB Devices
• MP3 Player : Flash type MP3 player.
USB Direct Recording
• The USB function of this unit does not support
all USB devices.
Portable In
Listens to music from your portable device. (MP3,
Notebook, etc)
USB device requirement
Made for iPod
• Devices which require additional program
installation when you have connected it to a
computer, are not supported.
Enjoy music from iPod with simple connection.
• Do not extract the USB device while in operation.
1
Getting Started
Records music to your USB device.
• USB Flash Drive : Devices that support USB2.0 or
USB1.1.
• For a large capacity USB, it may take longer than
a few minute to be searched.
Accessories
• To prevent data loss, back up all data.
Please check and identify the supplied accessories.
• If you use a USB extension cable or USB hub, the
USB device is not recognized.
• Using NTFS file system is not supported. (Only
FAT(16/ 32) file system is supported.)
• This unit is not supported when the total
number of files is 1 000 or more.
Remote Control (1)
Battery (1)
Playable file
Requirement
• External HDD, Card readers, Locked devices, or
hard type USB devices are not supported.
• USB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
MP3/WMA music file
requirement
MP3/ WMA file compatibility with this unit is limited
as follows :
y Sampling Frequency : 32 - 48 kHz (MP3), 32 - 48
kHz (WMA)
y Bit rate : 32 - 320 kbps (MP3), 40 - 320 kbps
(WMA)
y Maximum files : Under 999
y File extensions : “.mp3”/ “.wma”
y CD-ROM file format : ISO9660/ JOLIET
y We recommend that you use “Easy-CD Creator”,
which creates an ISO 9660 file system.
XP16DAB-AAUSLLK-ENG.indd 5
11. 08. 16
3:06
6
Getting Started
Remote
control
1
• • • • • • a • • • • •
Z ENTER :
POWER : Switches the unit ON
or OFF.
- Stops playback or recording.
- Choose an item(iPod).
EQ : Chooses sound impressions.
d/M (Play/Pause) : Starts or
pauses playback.
Getting Started
? : The button is not available
for any function.
OPEN/CLOSE : Opens and
closes the disc tray.
• • • • • • b • • • • •
PRESET/FOLDER W/S :
Searches for a folder of MP3/
WMA files. When a CD/ USB
containing MP3/ WMA files in
several folders is being played,
press PRESET/FOLDER W/S
to select the folder you want to
play. Choose a ‘preset number’
for a radio station.
FUNCTION : Selects the
function and input source.
VOLUME W/S : Adjusts
speaker volume.
@ MUTE : Mutes the sound.
• • • • • • c • • • • •
Battery Installation
PROGRAM/MEMO :
- For storing radio stations if
you have saved radio stations
using PROGRAM/MEMO,
you can scroll through them
and select one.
- Listens to your tracks in any
order.
X REC : USB direct recording.
• • • • • • d • • • • •
DAB INFO. :
- DAB radio type.
- Changes the display
information of DAB channel.
SORT/SCAN:
- Searches radio stations by
radio type.
- Aligning the service names
DAB band scanning.
? : The button is not available
for any function.
INFO : Checks information
about your music. MP3 files
often come with tags. The tag
gives the Title, Artist, Album or
Time information.
MENU/REPEAT :
Remove the battery cover on
the rear of the Remote Control,
and insert one (size AAA)
battery with 4 and 5 matched
correctly.
- Listens to your tracks
repeatedly or randomly. (only
in CD/USB)
- Move to the previous
menu(iPod).
TUN. -/+ : Selects the radio
station.
Cc/vV (Skip/
Search):
- Skips Fast backward or
Forward.
- Searches for a section within
a track.
XP16DAB-AAUSLLK-ENG.indd 6
11. 08. 16
3:06
Getting Started
7
a Remote sensor
Front panel
b 1/!(Power ON/OFF)
c FUNC.
Selects the function or input source.
1
e T/PRE. +
Starts playback and pauses.
Chooses a preset number for a radio station.
16
f I STOP/PRE. Stops playback or recording.
Chooses a preset number for a radio station.
1/!
12
2
11
1
R
3
g MEMO
On the CD/USB mode, you can make your own
playlist.
On FM mode, you can save radio stations.
4
6
5
13
9
10
8
7
Getting Started
d EQ
Chooses sound impressions.
h REC.
Recording to USB.
15
i Y(Skip/Search)/ TUN. -
14
j U(Skip/Search)/ TUN. +
k R(Open/Close)
You can use it when inserting or removing CDs.
l Display window
m VOLUME
Rear panel
n PORT. IN
o USB Port
You can play or recording sound files by
connecting the USB device.
p iPod dock
q FM/(DAB) ANTENNA
r Power cord
s Speaker terminal
17
19
18
XP16DAB-AAUSLLK-ENG.indd 7
11. 08. 16
3:06
8
Connecting
Connecting to
speakers
Optional Equipment
Connection
16
12
2
Attaching the speakers to the
unit
2
Connecting
To connect the cable to the unit, press each plastic
finger pad to open the connection terminals on the
unit. Insert the wire and release the finger pad.
11
1
USB Connection
13
VOL
-
3
FUNC.
T
6
EQ
4
5
Connect the USB Memory (or MP3 player, etc.) to
the USB port on the front of the unit.
7
MEMO
Y
U
REC.
8
10
9
Connect the black stripe of each wire to the
terminals marked - (minus) and the other end to
the terminals marked + (plus).
PORT IN
, Note
Removing the USB Device from the unit
1. Choose a different function/mode or
press Z twice in a row.
2. Remove the USB device from the unit.
3. You can only recharge your iPod
through USB port. To listen to music on
iPod, refer to the page 12.
> Caution
The speakers contain magnet parts, so color
irregularity may occur on the TV screen or PC
monitor screen. Please use the speakers far
away from either TV screen or PC monitor.
16
PORT. IN Connection
12
2
11
1
Connect an output (earphone or line out) of
portable device (MP3 or PMP etc) to the
PORT. IN connector.
13
VOL
-
3
FUNC.
7
MEMO
T
6
Y
9
EQ
4
REC.
8
5
U
10
PORT IN
XP16DAB-AAUSLLK-ENG.indd 8
11. 08. 16
3:06
Operating
Basic Operations
9
Selecting a folder
1. Press PRESET/FOLDER W/S on the remote
control repeatedly until a desired folder appears.
CD/ USB Operations
1. Insert the disc by pressing OPEN/CLOSE or
connect the USB device to the USB port.
2. Press d/M on the remote control or T on the
unit to play it. The first file of folder will play.
2. Select the CD or USB function by pressing
FUNCTION on the remote control or FUNC. on
the unit.
3. Select a file (or track) you want to play by
pressing Cc/vV.
To
Do this
Press Z on the remote control or
Stop
I on the unit.
Press d/M on the remote control
Playback
or T on the unit.
During playback, press d/M on the
Pause
remote control or Ton the unit.
During playback, press Y/U
on the unit or Cc/vV
on the remote control to go to the
Skipping to next track/ file or to return to the
the next/ beginning of the current track/ file.
previous
track/ file Press Cc on the remote
control or Y on the unittwice
briefly to step back to the previous
track/ file.
Press and hold Y/U on the
Searching unit or Cc/vV on the
for a section remote control during playback
within a track and release it at the point you want
to listen to.
Press MENU/REPEAT on the
remote control repeatedly, the
Playing
display change in the following
repeatedly or
order, RPT1 -> RPT DIR (only MP3/
randomly
WMA) -> RPT ALL -> RANDOM ->
OFF
Operating
XP16DAB-AAUSLLK-ENG.indd 9
3
11. 08. 16
3:06
10
Operating
Other Operations
Radio Operations
Programmed Playback
Listening to the radio
The program function enables you to store your
favorite files from any disc or USB device.
1. Press FUNCTION until TUNER (FM/ DAB) appears
in the display window. The last received station
is tuned in.
A program can contain 20 tracks.
1. Insert a CD or USB and wait for it to be order.
2. Press PROGRAM/MEMO on the remote control
or Press MEMO on the unit in stop status.
3. Press Y/U on the unit or
Cc/vV on the remote control in
stop status.
3
Operating
4. Press PROGRAM/MEMO on the remote control
or MEMO on the unit again to save and select a
next track.
2. [FM]
Press and hold TUN.-/+ for about two seconds
until the frequency indication starts to change.
Scanning stops when the unit tunes in a station.
Or
Press TUN.-/+ repeatedly.
[DAB]
Press TUN.-/+ and press d/M.
5. Press d/M on the remote control or T on the
unit to play the programmed music files.
3. Adjust the volume by rotating VOLUME on
the front panel or by pressing VOL +/- on the
remote control.
6. To clear your selection, press Z on the remote
control or I on the unit twice.
Presetting the Radio Stations
, Note
The programs are also cleared when the disc
or USB device is removed, the unit is powered
off or the function is switched to others.
Displaying file information
(ID3 TAG)
While playing an MP3 file containing file
information, you can display the information by
pressing INFO.
You can preset 50 stations for FM/ DAB.
Before tuning, make sure that you have turned
down the volume.
1. Press FUNCTION until the TUNER (FM/ DAB)
appears in the display window.
2. [FM]
Select the desired frequency by using
TUN.-/+.
[DAB]
Press TUN. -/+ and press d/M.
3. Press PROGRAM/MEMO a preset number will
flash in the display window.
Turn off the sound temporarily
4. Press PRESET/FOLDER W/S on the remote
control to select the preset number you want.
Press @ MUTE button on your remote to mute
your unit.
You can mute your unit, for example, to answer the
telephone, the mute symbol “@” is displayed in
the display window of unit.
5. Press PROGRAM/MEMO. The station is stored.
6. Repeat the steps 2 to 5 to store other stations.
7. Press PRESET/FOLDER W/S repeatedly on the
remote control to select the preset station you
want.
Deleting all the saved stations
1. Press and hold PROGRAM/MEMO for two
seconds. “ERASE ALL” will flash up on the unit
display.
2. Press PROGRAM/MEMO to erase all saved radio
stations.
XP16DAB-AAUSLLK-ENG.indd 10
11. 08. 16
3:06
Operating
Improving poor FM reception
Press d/M on the remote control. This will change
the tuner from stereo to mono and usually improve
the reception.
Listening to the DAB
You can change the display information of the
currently broadcasting DABchannel. Press
DAB INFO. on the remote control repeatedly, the
display changes in the following order,
SERVICE -> PTY NAME -> FREQ -> DLS -> QUALITY
-> ENSEMBLE
Select a display mode and then press C/V,
the initials of the servicename are displayed.
Displays the Name of the channel for
the current broadcast.
PTY NAME
Displays the Type of the channel for
the current broadcast.
FREQ
Displays the frequency of the channel
for the current broadcast.
DLS
It displays the current Scroll of the
channel which is selected.
QUALITY
It displays the current strength of the
broadcast signal.
ENSEMBLE
Displays the Ensemble of the channel
for the current broadcast.
Aligning the service names
Press SORT/SCAN on the remote control to display
the sorting mode of DAB broadcastings. Then, press
the button once again to change the mode.
Sound adjustment
Setting the surround mode
This system has a number of pre-set surround
sound fields. You can select a desired sound mode
by using EQ.
The displayed items for the Equalizer may be
different depending on sound sources and effects.
On Display
Description
AUTO EQ
Sets the sound equalizer on the
mode that is the most similar to
the genre which is included in
the MP3 ID3 tag of song files.
POP
CLASSIC
ROCK
This program lends an
enthusiastic atmosphere to the
sound, giving you the feeling
you are at an actual pop, classic
or rock concert.
BASS BLAST
BYPASS
3
Operating
SERVICE
11
Reinforce the treble, bass and
surround sound effect.
You can enjoy the sound
without equalizer effect.
, Note
Maybe you need reset the surround mode,
after switching the input, sometimes even
after the sound track changed.
Default sort: The service names are aligned in a
scanning order.
Name sort:
The service names are aligned in an
alphabetical order.
DAB scan
Press SORT/SCAN on the remote control for longer
than 3 seconds, all of the DAB bands are scanned.
Then press it again, scanning will be cancelled.
Deleting all of the saved DAB
scan stations
Press and hold DAB INFO. on the remote control for
3 seconds. “DAB INIT” will be displayed. Press
DAB INFO. to erase all the saved stations.
XP16DAB-AAUSLLK-ENG.indd 11
11. 08. 16
3:06
12
Operating
Advanced Operations
Choosers a
item
-
Z
ENTER
You can enjoy the sound with your iPod. For details
about iPod, refer to the iPod User Guide.
Compatible iPod/iPhone
1. Connect the iPod firmly.
y We recommend installing the latest software
version.
y The unit supports the models as follows/ iPod
nano 1 G, 2 G, 3 G, 4 G, 5 G, 6 G/
iPod classic/ iPod 4 G, 5 G/
iPod touch 2 G, 3 G, 4 G/ iPhone 3 G, 4. For some
models, the unit may not operate depending on
the firmware version.
y Depending on your iPod’s software version, you
may not control your iPod from the player.
3
1/!
Operating
R
, Note
VOL
-
+
FUNC.
I
T
EQ
MEMO
Y
U
REC.
y If this unit displays an error message, follow
the message. An error message “ERROR”.
If you turn this unit on, with your ipod
connected or docked it will automatically turn
on and recharging will start.
2. Press FUNC. on the unit or FUNCTION on the
remote control to select iPod function. You can
operate your iPod through an iPod’s display
by using the supplied remote control and also
control on your iPod.
15
14
PORT IN
5V 0 500mA
To
/ The battery needs to be charged.
/ If you charge the battery while iPod
is extremely low in power, it may take
longer to be charged.
y iPod does not support recording function
when connected.
Do this
ON UNIT
ON REMOTE
Pauses or
restart
T
d/M
Skip
Y/U
Cc/
vV
Search
Press and hold
Y/U
Press and hold
Cc/
vV
-
MENU/REPEAT
Move to the
Previous
- Your iPod is not connected firmly.
- This unit recognizes your iPod as an
unknown device.
- Your iPod is exceptionally low in power.
y Depending on your iPod’s software version,
it may not be possible to control your iPod
from this unit. We recommend installing the
latest software version.
y If you use an application, make a call, or
send and receive SMS text message, etc. on
iPod touch or iPhone, disconnect it from
iPod dock of this unit and then use it.
y If you have a problem with your iPod, please
visit www.apple.com/support/ipod.
menu
Move to the
desired item
XP16DAB-AAUSLLK-ENG.indd 12
-
PRESET/
FOLDER
W/S
11. 08. 16
3:06
Operating
13
Listening to music from your
external device
To select recording bit rate
and speed
This unit can be used to play music from many
types of external device.
(Refer to the page 8)
1. Press REC. on the unit or X REC on the remote
control for longer than 3 seconds.
1. Connect the external device to the PORT. IN
connector of the unit.
2. Turn the power on by pressing 1/! (Power).
3. Select the PORTABLE function by pressing
FUNC. on the unit or FUNCTION on the remote
control.
4. Turn the external device and start it playing.
Recording to USB
2. Select a function by pressing FUNC. on the unit
or FUNCTION on the remote control.
One track recording - You can record to USB
after playing a file you want.
All tracks recording - You can record to USB after
stop.
3. Press REC. on the unit or X REC on the remote
control again to select the recording speed.
4. Press Y/U on the unit or Cc/
vV on the remote control to select a
desired recording speed; (Only AUDIO CD)
X1 SPEED
- You can listen to music while recording it.
X2 SPEED
- You can just record the music file.
5. Press REC. on the unit or X REC on the remote
control to finish the setting.
3
Operating
1. Connect the USB device to the unit.
2. Use Y/U on the unit or Cc/
vV or remote control to select the bit
rate.
6. To stop recording, press I on the unit or Z on
the remote control.
Program list recording - After showing the
programmed list, you can record it to USB.
3. Start the recording by pressing REC. on the unit
or X REC on the remote control.
4. To stop recording, press Z on the remote
control or I on the unit.
Pausing recording
During recording, press REC. on the unit or X REC
on the remote control to pause recording. Press it
again to restart recording. (Only Radio, Portable)
XP16DAB-AAUSLLK-ENG.indd 13
11. 08. 16
3:06
14
Operating
, Note
• You can check the recording percentage
rate for the USB record on the display
window during the recording. (MP3/ WMA
CD Only)
• During recording MP3/ WMA, there is no
sound.
• When you stop recording during playback,
the file that has been recorded at that time
will be stored. (AUDIO CD Only)
• Do not remove the USB device or turn
off the unit during USB recording. If not,
an incomplete file may be made and not
deleted on PC.
3
Operating
• If USB recording does not work, the
message like “NO USB”, “ERROR”, “FULL” or “NO
REC” is displayed on the display window.
• Multi card reader device or External HDD
can not be used for USB recording.
• A file is recorded by about 512 Mbyte when
you record for a long term.
• When you stop recording during playback,
the file will not be stored.
• You may not store more than 999 files.
• It’ll be stored as follows.
AUDIO CD
MP3/ WMA
The other
source*
* : TUNER, PORTABLE and the like.
* The DAB function does not support recording
function.
The making of unauthorized copies of copyprotected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
XP16DAB-AAUSLLK-ENG.indd 14
11. 08. 16
3:06
Troubleshooting
15
Troubleshooting
Problem
Cause & Correction
• The power cord is not plugged in. Plug in the power cord.
No Power.
• Check whether electricity failed. Check the condition by operating other
electronic devices.
• Check whether you select right function. Press FUNCTION and check the
selected function.
No sound.
• Speaker cables are not connect correctly. Connect the speaker cables
correctly.
• The volume is set to minimum. Use the volume controller to adjust the
volume.
• An unplayable disc is inserted. Insert a playable disc.
• No disc is inserted. Insert a disc.
The unit does not start
playback.
• The disc is dirty. Clean the disc. (Refer to the page 17)
• The antenna is positioned poorly. Adjust its position.
Radio stations cannot
be tuned in properly.
• The signal strength of the radio station is too weak. Tune to the station
manually.
4
Troubleshooting
• The disc is inserted upside down. Place the disc with the label or printed
side facing upwards.
• No stations have been preset or preset stations have been cleared (when
tuning by scanning preset channels). Preset some radio stations, see page 10
for details.
• The remote control is not pointed at the remote sensor of the unit. Point
the remote control at the remote sensor of the unit.
• The remote control is too far from the unit. Operate the remote control
within about 16 ft (5 m).
The remote control
does not work properly. • There is an obstacle in the path of the remote control and the unit. Remove
the obstacle.
• The battery in the remote control is exhausted. Replace the battery with
new one.
iPod does not work.
XP16DAB-AAUSLLK-ENG.indd 15
•
Check whether the player is connected to the unit correctly. Connect it to
the unit correctly.
11. 08. 16
3:06
16
Appendix
Specifications
General
Power supply
100 - 240 V ~ 50 - 60 Hz or 200 - 240 ~ 50/60Hz
Power consumption
20 W
Net Weight
2.0 kg
External dimensions (W x H x D)
164 x 209 x 201 mm
Operating conditions Temperature 5 °C to 35 °C (41 °F to 95 °F)
Operating humidity
5 % to 85 %
Tuner
FM Tuning Range
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
Amplifier
Output Power
5W+5W
CD
Frequency Response
40 Hz to 20 kHz
Signal-to-noise ratio
70 dB
5
Dynamic range
55 dB
Appendix
USB
USB Version
Bus Power Supply
USB 2.0 or USB 1.1
DC 5 V
500 mA
iPod DC 5 V 0 1 A
Speakers
Type
1 Way 1 Speaker
Impedance
6Ω
Rated Input Power
5W
Max. Input Power
10 W
Net Dimensions (WxHxD)
140 x 206 x 148 mm
Net Weight(1EA)
1.3 kg
• Design and specifications are subject to change without notice.
XP16DAB-AAUSLLK-ENG.indd 16
11. 08. 16
3:06
Appendix
Maintenance
17
Notes on Discs
Handling Discs
Handling the Unit
Never stick paper or tape on the disc.
When shipping the unit
Storing Discs
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Keeping the exterior surfaces clean
Cleaning Discs
Do not use volatile liquids such as insecticide spray
near the unit.
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available cleaners,
or anti-static spray intended for older vinyl records.
Wiping with strong pressure may damage the
surface.
Do not leave rubber or plastic products in contact
with the unit for a long period of time.
Cleaning the unit
Trademarks and
Licenses
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
The unit is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
For details, please contact your nearest authorized
service centre.
iPod is a trademark of Apple Inc., registered in
the U.S. and other countries.
iPhone is a trademark of Apple Inc. “Made
for iPod” and “Made for iPhone” mean that
an electronic accessory has been designed
to connect specifically to iPod or iPhone
respectively, and has been certified by the
developer to meet Apple performance standards.
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards.
Please note that the use of this accessory with
iPod, iPhone may affect wireless performance.
Appendix
Maintaining the Unit
5
The ‘DAB Digital Radio‘ logo and the stylised ‘r‘
mark® and © Digital One Ltd.”
XP16DAB-AAUSLLK-ENG.indd 17
11. 08. 16
3:06
XP16DAB-AAUSLLK-ENG.indd 18
11. 08. 16
3:06
Download PDF

advertising