LG | 50PC3D | LG 50PC3D Owner’s Manual

PLASM TV
PLASMA TV MODEL
50PC3D
Please read
before
DVB is
a
registered trademark
Project
of the DVB
Information Manual
reading this
manual and
P/NO
:
included
operating your
38289U0569E
together
set.
(0608-REV01)
9U0569E-1_50PC3D
06/8/29
2:51
PM
1
Page
R
is
R
a
trademark of SRS Labs, Inc.
TruSurround XT
technology
is
incorporated
Manufactured under license from
bol
are
HDMI
trademarks of
TM
,
the HDMI
registered
LG's
own
Dolby
logo
and
Dolby
under license from SRS Labs, Inc.
Laboratories.
"Dolby"
and the double-D sym-
Laboratories.
High-Definition
trademark of HDMI
Multimedia Interface is
a
trademark
or
Licensing."
special digital image generator. It consists of full digital image
picture quality factors.
processor,
APM mode & 6 different main
1
9U0569E-1_50PC3D
06/8/29
2:51
PM
Page
2
CONTENTS
CONTE S
INTRODUCTION
TV MENU
Accessories......................................................5
On Screen Menus Selection and
Controls/ConnectionOptions......................6-7
RemoteControlKeyFunctions.......................8-9
Setup(Programme)
Adjustment
.
.
.
.
.
31
AutoProgrammeTuning..................................32
ManualProgrammeTuning.........................33-34
INSTALLATION
WireArrangement...........................................10
AttachingtheTVtoawall................................11
DesktopPedestalInstallation............................12
.35
Finetuning(InAnaloguemodeonly).
Assigning a station name (In Analogue mode only) 36
ProgrammeEdit.........................................37-38
CallinguptheProgrammeTable.......................39
Digital signal strength (In Digital mode only) 40
Booster(InDigitalmodeonly).........................41
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
CONNECTIONS & SETUP
Video
AntennaConnection........................................13
HDSTBSetup...........................................14-16
VCRSetup................................................17-18
AVOutSetup.................................................19
DigitalAudioOutput.......................................20
ExternalA/VSourceSetup...............................21
DVDSetup................................................22-23
PCSetup...................................................24-27
Adjustment
PictureStatusMemory(PSM)..........................42
AdaptivePictureMode(APM).........................43
BrightnessAdjustment....................................43
Manual Picture Control (PSM-User Option)
44
.
.
.
.
.
XD.................................................................45
ColourTemperatureControl......................46-47
-AutoColourTemperatureControl..................46
.47
-ManualColourTemperatureControl.
.
.
.
.
.
.
.
.
.
.
.
.
Advanced.................................................48-49
-Cinema........................................................48
BASIC OPERATION
TurningtheTVOn..........................................28
Initializingsetup..............................................28
VolumeAdjustment.........................................29
ProgrammeSelection.......................................29
-BlackLevel....................................................49
VideoPreset..................................................50
Audio
Adjustment
SoundStatusMemory(SSM)..........................51
Manual Sound Control (SSM-User Option)
52-53
AutoVolumeLeveller(AVL)..............................54
.
.
.
.
Balance...........................................................55
SPECIAL FUNCTIONS
EPG
(Electronic Programme Guide)
-Switchon/offEPG........................................30
-Selectaprogramme......................................30
TVSpeakersOn/OffSetup..............................56
Stereo Reception (In Analogue mode only)
57
Soundoutputselection...................................57
.
Time
.
.
.
.
.
Setting
AutoClockSetup............................................58
ManualClockSetup........................................59
On/OffTimeSetup........................................60
SleepTimer....................................................61
AutoSleep......................................................62
2
06/8/29
9U0569E-1_50PC3D
Optional
2:51
PM
Page
3
Features
MainPictureSourceSelection..........................63
Subtitle
(In Digital
mode
only) .........................64
ChildLock.....................................................65
PictureFormat............................................66
CONTE S
XDDemo...................................................67
ISM
(Image Sticking Minimization)
Method
.
.
.
.
.
.
.
.
.
.
68
LowPower......................................................69
Lock
Adjustment
SettingUpYourpassword................................70
LockSystem....................................................70
SetPassword...................................................71
BlockProgramme............................................72
Parental Guidance (In Digital mode only)
73
.
.
.
.
.
.
.
.
.
Aux.Block.......................................................73
APPENDIX
ExternalControlDeviceSetup....................74-79
IRCodes..................................................80-81
ProgrammingtheRemoteControl..................82
ProgrammingCodes.................................83-84
TroubleshootingChecklist..........................85-86
ProductSpecifications.....................................87
After
reading
this manual,
keep
it
handy
for future reference.
3
06/8/29
9U0569E-1_50PC3D
2:51
PM
4
Page
INTRODUCTION
What is
a
Plasma TV?
is the best way to achieve flat
Using plasma
with excellent
displays
sizes that
thought
a
easily
are
of
The Plasma TV
as a
image quality
and
panel
large screen
viewable. The Plasma TV
descendant of the
series of fluorescent
neon
can
lamp
be
and
or
lamps.
INTRODUC
computer
array of
as
monitors.
Plasma TV offers
each
cells, known
sub-pixel
a
rich, dynamic display because
controlled
is
advanced
individually
by
produce over 16 million different colors. This means that
you get perfect images that are
easily viewable in a display that is fewer than five
electronics to
160°
-
Wide
angle
manufacturers'
products.
that this Plasma TV is defective. Thus
a
mean
few cell defects
range of vision
the manufacture and
ing
Cooling
your
a
theater-like
experience
in
Multimedia
Connect your
plasma display
to
a
PC and
use
it for
conferencing, games, and Internet browsing. The
Picture-in-Picture feature allows you to view your PC
and video
images simultaneously.
Versatile
The
light weight and thin size makes it easy to install
your plasma display in a variety of locations where
conventional TVs do not fit.
appearing
for the
cause
In the
to
same
keep
operation
of this
product.
Fan Noise
way that
fan is used in
a
a
PC
computer
the CPU
Plasma TV is
Monitor and
(Central Processing Unit) cool, the
equipped with cooling fans to cool the
improve its reliability. Therefore, a cer-
tain level of noise could
and
cooling
occur
while the fans
are
the Plasma TV.
during
the
operation
of
product.
hope you understand that a certain
level of noise from the cooling fans is acceptable and
exchanged
Wide Screen
offers
dots
returned. Our proexchanged
duction technology minimizes these cell defects dur-
We
is not sufficient
room.
home.
tiny
or
this
screen
The
not sufficient
are
Plasma TV to be
from these fans is normal
own
should be
screen
in other Plasma TV
The fan noise doesn't have any negative effect on
the Plasma TV's efficiency or reliability. The noise
panel plasma screen offers an exceptionally
viewing angle of over 160 degrees. This means
the display is clear and visible to viewers any-
The wide
the
on
occurs
broad
where in the
4
This also
Your flat
that
the
does not
operating
inches thick.
present
few
a
on
composed of 0.9 to 2.2 million
cells. A few cell defects will normally occur in the
Plasma TV manufacturing process. Several tiny,
acceptable.
pixels, which
are
comprised of three sub-pixels, corresponding to
the colors red, green, and blue. Gas in a plasma state
is used to react with phosphors in each sub-pixel to
produce colored light (red, green, or blue). These
phosphors are the same types used in Cathode Ray
Tube (CRT) devices such as televisions and common
an
Process:
The Plasma TV is
minute colored dots visible
How does it work?
Plasma TV is
Manufacturing
minute colored dots may be
Plasma TV screen
or
cause
for the Plasma TV to be
returned.
9U0569E-1_50PC3D
06/8/29
2:51
PM
Page
5
ACCESSORIES
Ensure that the
following
tact the dealer where you
accessories
are
purchased
the
included with your
If
product.
an
accessory is
missing, please
con-
product.
INPUT
D/A
TV
POWER
INPUT
DVD
ARC
TEXT
VCR
PSM
LIST
GUIDE
MENU
EXIT
Owner's Manual
INFO
I/II
SLEEP
OK
Q.VIEW
VOL
PR
MUTE
1.5V 1.5V
123
456
789
APM
Owner's Manual
2-Wall brackets
Batteries
0
FAV
Remote Control
Power Cord
INTRODUC
2-eye-bolts
5
9U0569E-1_50PC3D
06/8/29
2:51
PM
Page
6
INTRODUCTION
CONTROLS
Here shown may be somewhat different from your TV.
Front Panel Controls
INTRODUC
PROGRAMME
PR
(D,E)Button
VOLUME
VOL
(F,G)
Button
OK
OK Button
MENU
MENU Button
INPUT
INPUT Button
Remote Control Sensor
(POWER)
Power Standby Indicator
Illuminates red in standby mode.
When the TV is turned
on,
the indicator blinks white and
then illuminates white before the
6
picture
is
displayed.
Button
9U0569E-1_50PC3D
06/8/29
2:51
PM
Page
7
CONNECTION OPTIONS
Here shown may be somewhat different from your TV.
Back Connection Panel
AUDIO
Input
Connections
available for listening to
an external device.
are
stereo sound from
VIDEO
Input
Connects the video
signal
from
a
video
device.
10
INTRODUC
AV OUT
1
MONO
2
V DEO
AUD O
S-V DEO
V DEO
AVIN1
AUD O
3
COMPONENT IN
6
4
5
HDMI/DVI IN
DIG TAL AUDIO
RS-232C IN
OUT
(CONTROL & SERV CE)
8
9
REMOTE
RGB IN
CONTROL N
7
OPT CAL
AUD O
RGB/DV
)
ANTENNA
IN
RGB
1
Connect
2
6
AV OUT
AV
a
second TV
(Audio/Video)
7
output from
an
8
S-VIDEO
3
these
a
to
Connect
10
Or
the this port with
a
HDMI to DVI cable.
5
signals
to this
jack.
output from
settop box
a
or
PC to
appropriate input port.
Remote Control Port
Power Cord Socket
For
HDMI
signal.
DVI(VIDEO)signal to
a
PC.
Connect your wired remote control.
jacks.
HDMI/DVI IN
on a
RGB/AUDIO IN
the
9
component video/audio device
port
PORT
ANTENNA IN
Connect the
S-VIDEO device.
COMPONENT IN
Connect
4
an
(CONTROL &SERVICE)
Connect cable
externa
jacks.
Connect S-Video out from
RS-232C IN
Connect to the RS-232C
monitor.
IN 1
Connect audio/video
device to these
or
PC/DTV)
operation
with AC power.
Caution: Never
attempt
to
operate the
TV
on
DC
power.
DIGITAL AUDIO OUT OPTICAL
Connect
digital
equipment.
audio from various types of
standby mode, these ports
Note: In
do not work.
7
06/8/29
9U0569E-1_50PC3D
2:51
PM
8
Page
INTRODUCTION
REMOTE CONTROL KEY FUNCTIONS
When
using
the remote control, aim it at the remote control
D/A INPUT Selects
digital
or
analogue
sensor on
the TV.
mode.
INPUT
(Digital TV /
Analogue TV)
INPUT
D/A
External
modes rotate in
input
regular
Analogue, AV1-2, Component 1-2,
PC), HDMI/DVI.
INTRODUC
sequence: Digital,
RGB-DTV (or RGB-
INPUT
DVD
ARC
VCR
TEXT
POWER
PSM
GUIDE
Selects your desired
+/-
Adjusts brightness
picture
mode
format. G
on screen.
It returns to the default
G
p.66
p.43
settings brightness by changing
LIST
source.
MENU
EXIT
VCR/DVD Control
OK
some
("RECORD"
video cassette recorders
your selection
Accepts
or
Adjusts
menu
settings.
(Up/Down/Left
Right)
Selects
menu
item.
Programme +/-
displays
DVD
players
player).
OK
the current mode.
Q.VIEW
Increase/decrease the sound level.
to the
previously
Switches the sound
Selects
on or
viewed programme.
off.
MUTE
123
456
programme.
APM
FAV
8
PR
789
a
NUMBER button
APM
I/II
SLEEP
VOL
Q.VIEW Returns
MUTE
or
button is not available for DVD
THUMBSTICK
VOLUME +/-
INFO
Switches the set between ON and STANDBY.
ARC
control buttons
TV
POWER
Concurrently, compare with the Dynamic, Standard, Mild,
User1 (or User2) on the screen. G p.43
(FAVOURITE) Displays
the selected favourite programmes.
0
FAV
9U0569E-1_50PC3D
06/8/29
2:51
PM
Page
TV, DVD, VCR, Selects the
Adjust
the
GUIDE
Shows
a
COLOURE
Button
programme schedule.
Shows the present
screen
information.
are used as
per the indications
EPG and programme edit.
LIST
Displays
Selects
viewing
from any
operating modes,
for the
or
to the
mode
G
room.
only)
p.42
G
p.30
(In Digital
mode
only)
functions
displayed
on
the TV
screen
in the
case
of
INTRODUC
menu.
the programme table. G p.39
a menu.
I/II Selects the sound output
Installing
(In Digital
They
Returns to TV
SLEEP
mode: TV, VCR, DVD. Select other
factory preset picture according
EXIT
MENU
operating
Select the subtitle on/off. G p.64
PSM
INFO
remote
operate external devices.
remote to
TEXT
9
Sets the
sleep
timer. G
or
the audio mode. G p.57
p.61
Remote control effective range
Batteries
NPUT
D/A
POWER
NPUT
battery compartment
matching
polarity (+with +,-with )
Open
cover on
side and install the batteries
the back
correct
.
used batteries with
Close
cover.
new ones.
Use
30
-
Install two 1.5V AA batteries. Don't mix old
LIST
or
a
TV
DVD
ARC
TEXT
the
VCR
PP
GUDE INFO
MENU
III
remote control up to 7 meters distance and
degree (left/right)
within the
receiving
unit
scope.
Dispose
of used batteries in
a
recycle
bin to
preserve environment.
9
9U0569E-1_50PC3D
06/8/29
2:51
PM
Page
10
INSTALLATION
WIRE ARRANGEMENT
INSTAL O
1
Hold the CABLE MANAGEMENT with both hands and
2
Connect the cables
To connect
3
10
an
as
pull
it backward
as
shown.
necessary.
additional
equipment,
Install the CABLE MANAGEMENT
see
as
the Connections &
shown.
Setup
section.
9U0569E-1_50PC3D
06/8/29
2:51
PM
11
Page
ATTACHING THE TV TO A WALL
Set it up close to the wall
so
the
The instructions shown below is
doesn't fall
over
hurting people.
don't climb
when it is
hang
doesn't fall
when it is
over
safer way to set up the
a
product,
in the forward direction. It will
pulled
It will also
on or
product
pushed
backwards.
which is to fix it
on
the wall
prevent the product from damage caused by fall. Please make
from the
so
the
product
prevent the product from falling forward and
sure
that children
product.
INSTAL O
Insert the
*
If your
eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.
product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.
Insert the
eye-bolts
and
tighten
them
securely
Secure the wall brackets with the bolts
the wall. Match the
Ensure the
height
eye-bolts
or
in the upper holes.
(not provided
as
parts of the product,
of the bracket that is mounted
brackets
are
Use
a
on
must
purchase separately )
product.
on
the wall to the holes in the
tightened securely.
sturdy
rope
be
(must
safer to tie the rope
so
it
purchased separately) to secure the TV. It is
horizontally between the wall and the TV.
runs
11
9U0569E-1_50PC3D
06/8/29
2:51
PM
Page
12
INSTALLATION
DESKTOP PEDESTAL INSTALLATION
For proper
ventilation, allow
a
clearance of 4inches
on
each side from the wall.
4 inches
INSTAL O
4 inches
4 inches
4 inches
CAUTION
G Ensure
12
adequate
ventilation
by following
the clearance recommendations.
06/8/29
9U0569E-1_50PC3D
2:51
PM
13
Page
CONNECTIONS & SETUP
ANTENNA CONNECTION
Wall Antenna Socket
For
or
Outdoor Antenna without
optimum picture quality, adjust
a
Cable Box Connections.
antenna direction if needed.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Wall
Antenna
CONETIS&UP
Socket
RF Coaxial Wire
Outdoor
(75 ohm)
ANTENNA
IN
Antenna
(VHF, UHF)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
UHF
Antenna
Signal
Amplifier
VHF
ANTENNA
IN
To
improve
the
picture quality
If the antenna needs to be
split
If the antenna is not installed
!
in
a
poor
signal
area,
for two TV's, install
properly,
please purchase
a
a
signal amplifier
and install
properly.
2-Way Signal Splitter.
contact your dealer for assistance.
NOTE
G The TV will let you know when the
analogue, cable,
and
digital
programme
scans are
complete.
13
06/8/29
9U0569E-1_50PC3D
2:51
PM
Page
14
CONNECTIONS & SETUP
HDSTB SETUP
This TV
Digital Over-the-air/Cable signals
digital signals from a digital set-top box or
can
do receive
without
receive
other
an
external
digital
box. However, if you
external device, refer to the figure as
digital set-top
shown below.
This TV supports HDCP
(High-bandwidth Digital
Contents
Protection) protocol
for
Digital
Contents
(480p,720p,1080i).
When
cable
connecting Component
1. How to connect
Y
Connect the video
1
CONETIS&UP
outputs
( Y, PB, PR) of the
top box to the COMPONENT IN VIDEO 1
the set. Match the
jack
digital
jacks
PB
PR
L
R
set
on
colors
(Y=green,PB=blue,andPR=red)
1
Connect the audio
2
output of the digital set-top box
the COMPONENT IN AUDIO 1
2. How to
Turn
on
jacks
on
2
to
the set.
use
the
( Refer to
digital set-top
box.
the owner's manu-al for the
digital set-top
box. )
S-VIDEO
VIDEO
ADO
COMPONENT IN
Select
button
Component
on
1
input
source
using
the INPUT
the remote control.
If connected to COMPONENT IN 2
Component
14
with
2
input
input,
select
source.
Signal
Component 1/2
RGB-DTV, HDMI
480i
Yes
No
480p
Yes
Yes
576 i
Yes
No
576 p
Yes
Yes
720p
Yes
Yes
1080i
Yes
Yes
06/8/29
9U0569E-1_50PC3D
When
2:51
PM
connecting
Page
15
D-sub
cable
15pin
1. How to connect
RGB IN
Connect the RGB
1
output of the digital set-top box
(PC DTV) jack on the set.
RGB
Connect the audio
2
outputs of the set-top box
AUDIO(RGB DVI) jack on the
2. How to
Turn
to the
AUDIO
RGB
to the
(RGB/DVI)
(PC DTV)
set.
use
the
on
REMOTE
CONTROL IN
digital set-top
box.
( Refer to the owner's manual for the
digital set-top
Select RGB-DTV
using
box. )
1
button
When
on
input
source
with
2
the INPUT
the remote control.
connecting
HDMI cable
1. How to connect
RGB OUTPUT
Connect the
1
jack
No
2
on
the
IN
audio connection is necessary.
digital set-top
HDMI/DVI IN
box.
the owner's manual for the
Select HDMI
!
DVI
CONETIS&UP
use
(Refer to
button
box to HDMI
R
the set.
separated
2. How to
Turn
on
digital set-top
L
on
DVI
input
source
digital set-top box.)
with
using
RS-2
DIGITAL AUDIO
OUT
(CONTROL
OPTICAL
the INPUT
the remote control.
NOTE
G If the
box supports Auto HDMI function, the
resolution
of
the source device will be automatically
output
digital set-top
set to
G If the
1280x720p.
digital set-top
HDMI, you need
To
1
box
does not support Auto
output resolution appropriately.
player
to set the
get the best picture quality, adjust the output resolution
of the
source
device to
HDMI-DTV OUTPUT
1280x720p.
15
9U0569E-1_50PC3D
06/8/29
2:51
PM
16
Page
CONNECTIONS & SETUP
When
HDMI to DVI cable
connecting
RGB IN
DIGITAL AUDIO
OUT
HDMI/DVI IN
ANTENNA
RS-232C IN
IN
(CONTROL &SERVICE)
AUDIO
(RGB/DVI)
OPTICAL
RGB
2
1
CONETIS&UP
L
DVI-DTV OUTPUT
R
1. How to connect
1
Connect the DVI
2
Connect the audio
2. How to
Turn
on
output of the digital set-top box
to the HDMI
output of the digital set-top box
to the
DVI
IN
jack
on
the set.
AUDIO(RGB DVI) jack
use
the
digital set-top
Select HDMI
16
(PC/DTV)
DVI
input
box.
( Refer
source
with
to the owner's manual for the
using
the INPUT button
on
digital set-top
box. )
the remote control.
on
the set.
REM
CONTR
06/8/29
9U0569E-1_50PC3D
2:51
PM
Page
17
VCR SETUP
To avoid
picture
If the 4:3
screen.
When
picture
This
does not
noise
(interference),
leave
format is used; the fixed
is
phenomenon
the product bearing
common
cover
connecting
with
adequate
images
on
distance between the VCR and TV.
the sides of the
screen
may remain visible
to all manufactures and in consequence the manufactures
this
an
an
on
warranty
phenomenon.
antenna
RGB IN
ANTENNA
IN
REMOTE
CONTROL IN
1
AUDIO
RGB
ANT OUT
S-VIDEO
ANT IN
OUTPUT
SWITCH
VIDEO
L
R
(RGB/DVI)
(PC/DTV)
Wall
2
Jack
Antenna
1. How to connect
1
Connect the RF antenna out socket of the VCR to the Antenna socket
2
Connect the antenna cable to the RF antenna in socket of the VCR.
2. How to
Set VCR
Insert
a
the
on
CONETIS&UP
the set.
use
output switch
to 3
or
4 and then tune TV to the
video tape into the VCR and press PLAY
on
same
the VCR.
programme number.
( Refer to
the VCR owner's manual. )
17
9U0569E-1_50PC3D
06/8/29
2:51
PM
18
Page
CONNECTIONS & SETUP
When
connecting
with
a
RCA cable
L
VIDEO
R
S-VIDEO
ANT IN
OUTPUT
SWITCH
ANT OUT
1. How to connect
Connect the AUDIO / VIDEO
1
white, and
between TV and
jacks
VCR. Match the
jack colors(Video
Audio Right
red)
=
yellow,
Audio Left
1
=
=
AV OUT
2. How to
Insert
a
use
video tape into the VCR and press PLAY
the
on
MONO
( Refer to the VCR owner's manual. )
VCR.
AUO
VIDEO
VID
S-VIDEO
CO
AVIN1
Select AV1
input
with
source
the INPUT button
using
on
the remote control.
CONETIS&UP
!
If connected to AV IN2 select AV2
input
,
NOTE
source.
G If you have
a mono
VCR,
con-
nect the audio cable from the
VCR to the AUDIO
L(MONO) jack of the
When
connecting
with
an
set.
S-Video cable
1. How to connect
Connect the S-VIDEO
1
input
pared
on
the set. The
to normal
input jacks
on
picture quality
composite ( RCA
Connect the audio
2
output of the VCR to the
S-VIDEO
is
improved;
cable ) input.
outputs of the
VIDEO
L
R
S-VIDEO
ANT IN
OUT
SCH
ANT OUT
com
VCR to the AUDIO
1
2
the set.
AV OUT
2. How to
Insert
a
use
video tape into the VCR and press PLAY
the VCR owner's manual. )
on
the VCR.
( Refer to
Select AV1
input
source
with
using
the INPUT button
MONO
VIDEO
on
AUO
S-V
VIDE
O
COM
AVIN1
the
remote control.
If connected to AV IN2, select AV2
input
source.
CAUTION
G Do not connect to both Video
!
NOTE
G The
picture quality is improved: ; compared
composite (RCA cable) input.
18
and S-Video at the
to normal
same
time. In
the event that you connect both
Video and the S-Video cables,
only
the S-Video will work.
9U0569E-1_50PC3D
06/8/29
2:51
PM
Page
19
AV OUT SETUP
The TV has
a
special signal output capability
which allows you to hook up the second TV
or
monitor.
1. How to connect
1
2
Connect the second TV
TV's AV OUT
See the
or
monitor to the
VIDEO
jacks.
Operating
for further details
Manual of the second TV
regarding
that device's
or
L
R
S-VIDEO
monitor
input settings.
1
!
G
NOTE
Digital, Component1-2, RGB-PC/RGB-DTV, HDMI/DVI
input sources cannot be used for AV out.
AV OUT
G We recommend to
use
the AV OUT
jacks
for VCR
recording.
MONO
()
VIDEO
AUDIO
S-VIDEO
CONETIS&UP
19
06/8/29
9U0569E-1_50PC3D
2:51
PM
Page
20
CONNECTIONS & SETUP
DIGITAL AUDIO OUTPUT
Send the TV's audio to external audio
equipment
via the
Digital
Audio
Output ( Optical ) port.
1. How to connect
Connect
1
Audio
( optical ) input
optical
on
Set the "TV
cable to the TV
Digital
optical
the audio
-
"
cable to the
as
RS-232C IN
DIGITAL AUDIO
OUT
(CONTROL&SERVICE)
digi-
equipment.
1
in the AUDIO
audio
equipment
NOTE
G When
HDMI/DVI IN
PTICAL
Speaker option Off
menu.
G
( p.56 ). See the external
instruction manual for operation.
2
connecting
amplifers
(G p.56)
or
with external audio
speakers, please
equipments,
turn the TV
such
speakers
off.
CAUTION
G Do not look into the
laser beam may
20
an
( Optical ) Output port.
tal audio
3
CONETIS&UP
end of
Connect the other end of the
2
!
one
optical output port. Looking
damage your vision.
at the
9U0569E-1_50PC3D
06/8/29
2:51
PM
Page
21
EXTERNAL A/V SOURCE SETUP
Camcorder
1. How to connect
1
Video Game Set
Connect the AUDIO/VIDEO
external
equipment.
Audio Left
=
white, and Audio
between TV and
jacks
Match the
jack
Right
colors. ( Video
=
=
yellow,
red )
VIDEO
2. How to
L
R
use
Select AV1
input
source
with
using
the INPUT button
on
the remote control.
If connected to AV IN2
input,
select AV2
input
source.
1
R
Operate
the
corresponding
external
equipment.
AUDIO
VIDEO
AVIN2
L/M NO
CONETIS&UP
21
9U0569E-1_50PC3D
06/8/29
2:51
PM
Page
22
CONNECTIONS & SETUP
DVD SETUP
When
cable
connecting Component
1. How to connect
Connect the video
1
Match the
jack colors (Y
Connect the audio
2
CONETIS&UP
outputs (Y, PB, PR) of the
COMPONENT IN VIDEO1
Turn
on
Select
button
green, PB
=
outputs of the
NENT IN AUDIO1
2. How to
jacks
on
jacks
on
=
DVD to the
Y
PB
PR
L
blue, and PR
=
red).
DVD to the C O M P O-
1
2
the set.
use
the DVD
player,
Component
on
1
insert
input
a
DVD.
source
with
using
the INPUT
the remote control.
VIDEO
S-VIDEO
ADO
COMPONENT IN
If connected to COMPONENT IN 2
Component
2
input
Refer to the DVD
input,
select
source.
player's
manual for
operating
instruc-
ANTENNA
OUT
tions.
Component Input ports
To
get better picture quality,
Component ports
on
on
DVD
player
connect
the TV
Video output ports
22
R
the set.
a
DVD
player
to the
YP B
PR
Y
Pb
Pr
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
component input ports
as
shown below.
06/8/29
9U0569E-1_50PC3D
When
2:51
PM
23
Page
connecting with
an
S-Video cable
AUDIO
L
R
S-VIDEO
1. How to connect
Connect the S-VIDEO
1
S-VIDEO
input
Connect the audio
2
input jacks
output of the
DVD to the
the set.
on
outputs of the
1
2
DVD to the AUDIO
the set.
on
AV OUT
2. How to
Turn
on
use
the DVD
player,
insert
MONO
DVD.
a
VIDEO
AUO
O
S-V
AVIN1
Select AV1
input
with
source
using
the INPUT button
on
the remote control.
If connected to AV IN2 select AV2
input
,
Refer to the DVD
When
player's
connecting
manual for
source.
CONETIS&UP
ANTENNA
OUT
operating
instructions.
HDMI cable
1. How to connect
Connect the HDMI
1
HDMI
No
2
DVI
IN
separated
output of the
jack
on
DVD to the
the set.
audio connection is necessary.
HDMI/DVI IN
DIGITAL AUDIO
OUT
(CO
OPTICAL
2. How to
use
Select HDMI
ton
on
DVI
with
source
using
the INPUT but-
the remote control.
Refer to the DVD
!
input
player's
manual for
operating
instructions.
1
NOTE
G If the DVD
supports
resolution will be
Auto HDMI
automatically
G If the DVD does not
support
the output resolution
To
function, the DVD output
set to
1280x720p.
Auto HDMI, you need to set
HDMI-DVD OUTPUT
appropriately.
get the best picture quality, adjust the output resolution
of the DVD to
1280x720p.
23
06/8/29
9U0569E-1_50PC3D
2:51
PM
Page
24
CONNECTIONS & SETUP
PC SETUP
This TV
provides Plug
and
Play capability, meaning
that the PC
The TV
screen
perceives 640x480, 60Hz as DTV 480p based
scanning rate for the graphic card accordingly.
When
connecting
D-sub
15pin
on
adjusts automatically
the PC
graphic
to the TV's
card. If necessary,
settings.
change
the
RGB IN
REMOTE
CONTROL IN
cable
1. How to connect
Connect the RGB
1
( PC
DTV ) jack
on
output of the
PC to the RGB
ENNA
N
the set.
AUDIO
CONETIS&UP
2
Connect the PC audio
to the
AUDIO
RGB
( RGB
2. How to
Turn
output
(RGB/DVI)
DVI ) ack
on
V)
the set.
use
the PC and the set.
on
2
Select RGB-PC
input
source
in main
input option
of
1
Special
menu.( G p.63)
Once you select RGB-PC in main
input option
of
Special
menu, INPUT button is also available for this purpose.
!
NOTE
G Check the
image
on
your TV. There may be noise associ-
ated with the resolution, vertical pattern, contrast or
brightness in PC mode. If noise is present, change the PC
output
to another
another rate
VIDEO
the PC
graphic
graphic
24
resolution, change the refresh
rate to
brightness and contrast on the
menu until the
picture is clear. If the refresh rate of
card
can not be
graphic
changed, change the PC
card
card.
the
or
adjust
or
consult the manufacturer of the PC
AUDIO
RGB OUTPUT
06/8/29
9U0569E-1_50PC3D
When
2:51
PM
connecting
Page
25
HDMI to DVI cable
RGB IN
DIGITAL AUDIO
OUT
HDMI/DVI IN
ANTENNA
IN
RS-232C IN
(CONTROL &SERVICE)
REMOTE
CONTROL IN
AUDIO (RGB/DVI)
OPTICAL
RGB
1
(P
/DTV)
2
DVI-PC OUTPUT
AUDIO
1. How to connect
1
Connect the DVI
2
Connect the PC audio
2. How to
Turn
on
output
PC to the HDMI
to the AUDIO
DVI
( RGB
IN
DVI )
jack
jack
on
on
the set.
the set.
use
the PC and the set
Select HDMI
!
output of the
CONETIS&UP
DVI
input
source
with
using
the INPUT button
on
the remote control.
NOTE
G If the PC has
a
DVI
G If the PC does not
best
output and
support
picture quality, adjust
no
HDMI
output,
a
separated
Auto DVI, you need to set the
the output resolution of PC
audio connection is necessary.
output resolution appropriately. To get the
card's output resolution to 1024x768,
graphics
60Hz.
25
9U0569E-1_50PC3D
06/8/29
2:51
PM
26
Page
CONNECTIONS & SETUP
!
NOTES
get the the best picture quality, adjust the
graphics card to 1024x768, 60Hz.
G To
G
Depending
on
not work if
a
the
graphics card,
PC
DOS mode may
HDMI to DVI Cable is in
use.
Specification
connected with
are
G If the
Screen. As shown in the
ADJUST button
to
picture below,
adjust
the TV SET and contact
the
a
PC
screen
press the
Position of
graphics
card
ser-
vice center.
G When Source Devices connected with
CONETIS&UP
Input, output
1080i)
TV SET Resolution
and TV SET
Display
HDMI/DVI
(480p, 720p,
fit EIA/CEA-861-B
Supported Display Specifications (RGB/HDMI-PC )
Resolution
Horizontal
Vertical
Frequency(KHz)
Frequency(Hz)
31.468
70.09
31.469
59.94
37.861
72.80
37.500
75.00
35.156
56.25
37.879
60.31
48.077
72.18
46.875
75.00
640x350
640x480
800x600
Input.
1024x768
*
26
RGB-PC mode
60.00
56.476
70.06
60.023
75.02
only:
640x350
ser-
or
if there is
signal"
not connected
poor cable connecis displayed in the HDMI/DVI
a
In this case, that Video Resolution is not
supported.
If "Invalid Format" is
the Source Device manual
or
displayed,
refer to
contact your service
center.
G Avoid
keeping a fixed image on the screen for a
long period of time. The fixed image may become
permanently imprinted on the screen.
G The
synchronization input form for Horizontal
frequencies is separate.
and Vertical
Supported Display Specifications (RGB/HDMI-DTV)
Horizontal
Vertical
Frequency(KHz)
Frequency(Hz)
720x576
31.25
50.00
720x480
31.47
59.94
31.50
60.00
Resolution
1280x720
1920x1080
48.363
contact your
HDMI/DVI Source Device is
tion, "No
HDMI/DVI Input, the output PC Resolution(VGA,
SVGA, XGA), Position and Size may not fit on the
or
vice center.
to the Cable
G When Source Devices
to Screen. If not, refer to the Manual
of HDMI/DVI Source Devices
37.50
50.00
44.96
59.94
45.00
60.00
28.125
50.00
33.72
59.94
33.75
60.00
06/8/29
9U0569E-1_50PC3D
Screen
2:51
PM
Setup for
Page
27
PC mode
Overview
This function works in the
following
mode:
Component1, Component2, RGB-PC, RGB-DTV,
Note: Some
HDMI/DVI.
or
signal from some graphics boards may
position, size and phase manually.
not function
properly.
If the results
are
unsatisfactory, adjust
your monitor's
Adjustment for
screen
Position, Clock, Phase
Position G
1
Press the OK button and then
use
D
E button to select
or
Clcok
D
Position
,
Clock ,or Phase
Phase
.
F
G
E
Reset
Press the G button and then
2
make
use
DEFG button to
appropriate adjustments.
The Phase
adjustment
The Phase
only
Close
range is -32
works in
+32
~
Component 1-2,
.
123
RGB-PC and
RGB-DTV mode.
The Clock
The Clock
adjustment
only
range is -50
+50
This function is to
Position
~
.
left/right
prefer.
to
works in RGB-PC mode.
adjust picture
up/down as you
This function is to minimize any
vertical bars or stripes visible on
Clock
3
and
the
Press the OK button.
screen
horizontal
background.
screen
CONETIS&UP
And the
size will
also
change.
This
Phase
function
remove
Initializing (Reset to original factory values)
To initialize the
adjusted
clear
or
allows you to
any horizontal noise and
sharpen
acters. In
the
image
of char-
HDMI/DVI-PC mode,
PHASE is not available.
values
This function allows you to return to the good picture reproduction programmed at the factory and cannot be change.
Position
1
Press the OK button and then
Reset
use
D
or
E button to select
Clcok
Initialize
.
Phase
Reset
Press the G button and then
2
Ye
use
F
or
Settings
G
G button to select
s.
Close
123
3
Press the OK button.
27
06/8/29
9U0569E-1_50PC3D
2:51
PM
Page
28
BASIC OPERATION
TURNING THE TV ON
INPUT
D/A
If your TV will be turned
on,
you will be able to
its features.
use
DVD
ARC
VCR
TEXT
Ensure the power cord is connected
1
GUIDE
INFO
mode.
standby
INPUT, PR +/-button
standby mode, press the
POWER
INPUT
D A INPUT PR
on the TV or
press the
,
,
+
PSM
correctly.
When connected to power the TV switches to
In
TV
POWER
INPUT
/
-
,
Number
(0 9) button
~
on
,
LIST
,
MENU
I/II
EXIT
the remote control.
SLEEP
OK
Select the
2
viewing
source
by using
the INPUT button
on
the remote control.
Q.VIEW
This TV is
last set to,
programmed
even
to remember which mode it
VOL
was
PR
MUTE
if you turn the TV off.
123
BASICOPERTN
456
When finished
3
using
the TV,
press the POWER button
the remote control. The TV reverts to
!
on
789
mode.
standby
0
APM
FAV
NOTE
G If you intend to be away
power
plug
on
vacation, disconnect the
from the wall power outlet.
INITIALIZING SETUP
Installation Guide
If the OSD
Screen
is
the
(On
Display) displayed
figure 1 after turning on the set, you can adjust the Auto
Programme tuning, Time Zone selection or Password setting.
1
on
Welcome
screen
as
The
to
Following
complete
process
initial
guides
you
settings. This
initial setup appears the first
time you turn the TV
settings
once
can
be
on.
changed
The
in
menu
entered.
Next
!
NOTE
G It will
automatically disappear
unless a button is pressed.
28
after approx. 40 seconds
Figure
1.
06/8/29
9U0569E-1_50PC3D
VOLUME
2:51
PM
Page
29
ADJUSTMENT
INPUT
D/A
TV
POWER
INPUT
DVD
ARC
Adjust
1
the volume to suit your
Press the VOL + /
-
personal preference.
button to
adjust
TEXT
the volume.
LIST
VCR
PSM
GUIDE
MENU
EXIT
INFO
I/II
SLEEP
OK
2
If you want to switch the sound off, press the MUTE button.
Q .VIEW
VOL
You
3
I/II
can
or
cancel the Mute function
VOL +
/
by pressing
the MUTE
PR
,
MUTE
button.
-
BASICOPERTN
PROGRAMME SELECTION
Q .VIEW
VOL
PR
MUTE
finds all programmes available through
inputs, and stores them in memory
the programme list.
Automatically
antenna
or
cable
on
123
456
789
APM
1
Press the PR+ /
-
or
NUMBER buttons to select
0
FAV
a
programme number.
29
SPECIAL FUNCTIONS
EPG
-
In
(ELECTRONIC
EPG
PROGRAMME
GUIDE)
INPUT
D/A
Digital Mode Only
This system has an Electronic Programme Guide
tion through all the possible viewing options.
The EPG
supplies
information such
as
(EPG)
programme
to
help
listings,
your
naviga-
DVD
ARC
VCR
TEXT
This function
can
be used
depending
only
on
the
PSM
GUIDE
INFO
start and end times
for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these
programme details will vary,
TV
POWER
INPUT
LIST
I/II
MENU
EXIT
particular broadcaster).
when the EPG information is broadcasted
SLEEP
OK
by
broadcasting companies.
Switch on/off EPG
Programme
Press the GUIDE button to switch
on
EPG.
11 TEN
Press the GUIDE
return to TV
or
EXIT button
again
to switch off EPG and
Guide
The Bold And The Beautiful
Mon 15 Dec 4:59PM
4:30PM~4:59PM
Digital
The
story of the glamerous ferrester family: ther loves,tragedies, triumphs
and
struggles for
viewing.
power in the fashion
TV
11 TEN
Digital
12 TEN
SPECIALFUNTO
/
industry.
NOW
HD
NEXT
The Bold And The Beauti...
TEN News
The Bold And The Beauti...
TEN News
13 TEN
Digital
1
No Information
No Information
14 TEN
Digital
2
No Information
No Information
15 TEN
Digital
3
No Information
No Information
16 TEN
Digital
4
No Information
No Information
Pr.Change
Select
a
Radio
More Info
programme
EPG
Press the DEFG button to select desired programme, then
press the OK button to display the selected programme.
Programme
Guide
TEN News
11 TEN
Mon Dec. 15 4:59PM
Digital
4:30PM~4:59PM
RON WILSON and JESSICA ROWE
national and
overseas news.
present a comprehensive coverage of local,
sport and the latest weather with TIM
Includes
BAILEY.
CC
i
Remote Control Buttons
RED
GREEN
30
Subtitle
Digital
16:9 576i
Information
Function
Shows the TV
Radio programmes
The detail information on or off
or
Back
TV MENU
ON SCREEN MENUS SELECTION AND
Your TV's OSD
( On
Screen
Display )
may differ
1
Press the MENU button and then
2
Press the G button and then
SETUP
use
use
D
slightly
or
ADJUSTMENT
from what is shown in this manual.
E button to select the each
DEFG button to
display
menu.
the available
menus.
PICTURE
Auto programme
PSM
Manual programme
Colour temperature
Programme edit
XD
Signal strength
Advanced
Booster
Video preset
Set ID
LOCK
TVMENU
AUDIO
Lock system
Set
SSM
password
AVL
Block programme
Parental
Balance
guidance
TV
Speaker
Aux. block
SPECIAL
TIME
Input
Subtitle
Child lock
ARC
XD demo
ISM method
Auto clock
Manual clock
Off time
On time
Sleep
timer
Auto
sleep
Low power
31
TV MENU
SETUP(Programme)
AUTO PROGRAMME TUNING
INPUT
D/A
to 100 TV stations
Up
bers
to
(0
use
to
can
99).
the PR+ /
by
programme
num-
or
-
preset the stations, you will be able
NUMBER buttons to scan the stations you
Stations
can
required
to
programmed.
be stored in this set
Once you have
be tuned
automatic
using
or
TV
POWER
INPUT
DVD
ARC
VCR
TEXT
PSM
GUIDE
INFO
manual
modes.
A
password
programme
If you
is
menu
gain
access
to Auto programme
if the Lock system is turned
forgot your password,
'7', '7', '7', '7'
press
or
Manual
on.
LIST
on
the remote
I/II
MENU
EXIT
con-
SLEEP
trol.
In
Australia, if
station
no
gramme number is
see
'Assigning
a
name can
assigned
be
assigned
and stored
-----
as
station name' section to
to
a
followed
assign
OK
station, the pro-
by
a
the station
number
name.
Auto programme
1
Press the MENU button and then D
select the SETUP
or
Manual programme
E button to
Programme edit
menu.
Signal strength
Booster
Set ID
2
TVMENU
/
Press the G button and then D
Auto
programme
E button to select
or
.
1
3
Press the G button to select
Select the
button
SETUP
or
beginning
from
Storage
Auto programme
Manual programme
programme number with the DE
NUMBER buttons.
D
E
Storage from
0
G
To start
Programme edit
Signal strength
Booster
Set ID
(
PROGAME
G
.
4
Press the G button to select To
start
.
23
)
5
Press the O K button to
All receivable stations
begin
are
auto
programming.
Auto programme
stored.
Manual programme
G
Storage from
stop
auto
When auto
programming
Programme
the
programming,
edit
'Programme
menu
is
Signal strength
press the OK button.
G
Processing
Programme edit
To
0
To start
All of
se
Auto programme...
will be
26%
Booster
completed,
appears
on
the
the
screen.
5 channels found
Set ID
(OK)
Press
See
digital
to start
programme
scan.
Edit' section to edit the stored proMENU
gramme.
Press
(OK)
Prev
to
start.
45
6
32
Press EXIT button to return to normal TV
viewing.
MANUAL PROGRAMME TUNING
INPUT
D/A
In
Digital
Mode
DVD
ARC
VCR
TEXT
Manual programme lets you
manually
add
a
TV
POWER
INPUT
PSM
GUIDE
INFO
programme to
your programme list.
LIST
I/II
MENU
EXIT
SLEEP
OK
Auto programme
1
Press the M E N U button and then
to select the SETUP
use
D
or
E button
Manual programme
Programme edit
menu.
Signal strength
Booster
Set ID
2
Press the G button and then
select Manual programme
use
D
or
E button to
.
1
3
Press the G button and then
use
D
or
E button to
select the progaramme number you want to add.
Auto programme
Manual programme
Programme edit
Signal strength
4
Press the OK button to store the programme. When
Booster
the programme number you want to add is already
added in programme list, the message "Already pro-
Set ID
grammed
channel. Do you
want
to
G
Select the
digital
channel
for manual
(
7
Signal strength
update?"
2
.
section to edit the stored programme.
Auto programme
Manual programme
Select the
Programme edit
channel
Signal strength
Booster
Press EXIT button to return to normal TV
PROGAME
)
.
When the programme is stored, the Programme edit
menu
appears on the screen. See the 'Programme Edit'
5
SETUP
scanning
will appear. If you want to keep on manual programming, select YES with using F / G button Then,
press the OK button. Otherwise select NO
TVMENU
/
viewing.
Set ID
digital
for manual
D
E
scanning
7
Signal strength
34
33
TV MENU
SETUP(Programme)
MANUAL PROGRAMME TUNING
Continued
INPUT
D/A
In
Analogue
Mode
DVD
ARC
VCR
TEXT
Manual programme lets you
manually
PSM
GUIDE
INFO
tune and arrange the sta-
tions in whatever order you desire. Also you
name
TV
POWER
INPUT
can
assign
station
a
with five characters to each programme number.
LIST
MENU
I/II
EXIT
1
2
Press the MENU button and then
to select the SETUP
D
use
or
SLEEP
E button
OK
menu.
Press the G button and then
select Manual programme
use
D
or
E button to
Auto programme
.
Manual programme
Programme edit
Signal strength
3
TVMENU
4
Press the G button to select Band
button to select V
UHF
or
Cable
Press the D
.
as
Set ID
required.
Press the G button to select Channel. Press the D
or
1
E button to select the desired channel number.
Auto programme
Manual programme
/
SETUP
Booster
E
or
5
(
Press the G button to select Search
E button to
commence
searching.
If
.
a
Press the D
or
station is found
the search will stop.
G
Band
V/UHF
Programme edit
Channel
Signal strength
Search
Up/Down
Booster
Fine
Up/Down
Set ID
Name
1
-----
0
Storage
PROGAME
6
)
If this station is the
one
required,
press the F
or
G
2
button to select
Storage. Select the desired pronumber
with the D or E button.
gramme
Auto programme
7
Press the OK button to store it.
D
E
Manual programme
Band
Programme edit
Channel
Signal strength
Search
Up/Down
Booster
Fine
Up/Down
Set ID
Name
To store another station,
repeat steps
G
1
-----
Storage
8
V/UHF
0
3 to 7.
Press
(OK)
to store.
34567
9
34
Press EXIT button to return to normal TV
viewing.
FINE TUNING
-
In
Analogue Mode only
INPUT
D/A
Normally
fine
tuning
is
only
necessary if
The
finely tuned programme will be
number during programme selection.
reception
indicated
by
is poor.
a
yellow
TV
POWER
INPUT
DVD
ARC
VCR
TEXT
PSM
LIST
GUIDE
MENU
INFO
I/II
EXIT
SLEEP
OK
Auto programme
1
Press the MENU button and then
to select the SETUP
use
D
or
E button
Manual programme
Programme edit
menu.
Signal strength
Booster
Set ID
2
Press the G button and then
use
D
E button
or
select Manual programme.
TVMENU
1
3
4
Press the G button and then F
select Fine
Press the D
picture
5
or
G button to
Auto programme
Manual programme
.
or
E button to fine tune for the best
G
Band
V/UHF
Programme edit
Channel
Signal strength
Search
Up/Down
Booster
Fine
Up/Down
Set ID
Name
and sound.
/
1
SETUP
(
-----
0
Storage
2
Press the OK button to store.
PROGAME
)
Auto programme
6
Press EXIT button to return to normal TV
viewing.
Manual programme
Band
Programme edit
Channel
Signal strength
Search
Booster
Fine
Set ID
Name
V/UHF
D
E
Up/Down
G
-----
Storage
Press
1
Up/Down
(OK)
0
to store.
345
35
TV MENU
SETUP(Programme)
ASSIGNING A STATION NAME
-
In
Analogue Mode only
INPUT
D/A
You
can
assign
a
station
name
with the characters to each
programme number.
TV
POWER
INPUT
DVD
ARC
VCR
TEXT
PSM
LIST
GUIDE
MENU
INFO
I/II
EXIT
SLEEP
OK
Auto programme
1
Press the MENU button and then
to select the SETUP
use
D
or
E button
Manual programme
menu.
Programme edit
Signal strength
Booster
Set ID
2
TVMENU
Press the G button and then
use
D
or
E button to
select Manual programme.
1
3
Press the G button and then
select Name
use
F
or
G button to
Auto programme
.
Manual programme
/
SETUP
(
4
Press the D
to
PROGAME
)
5
9
,
the
or
E button. You
alphabet
Press the F
or
A to Z+
can use
-
,
,
the numeric 0
Band
V/UHF
Channel
Signal strength
Search
Up/Down
Booster
Fine
Up/Down
Set ID
Name
and blank.
G button to select the
G
Programme edit
1
-----
0
Storage
position
make your choice of the second character, and
and
2
so on.
Auto programme
6
Press the O K button to store.
Manual programme
Band
Programme edit
Channel
Signal strength
Search
Booster
Fine
Set ID
Name
V/UHF
Up/Down
D
E
Storage
7
Press EXIT button to return to normal TV
1
Up/Down
-----G
0
viewing.
Press
(OK)
to store.
345
36
PROGRAMME EDIT
INPUT
D/A
This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers
or
TV
POWER
INPUT
DVD
ARC
VCR
TEXT
PSM
GUIDE
copy blank station data into the
INFO
selected programme number.
LIST
MENU
I/II
EXIT
SLEEP
OK
Auto programme
1
Press the MENU button and then
to select the SETUP
use
D
or
E button
Manual programme
Programme edit
menu.
Signal strength
Booster
Set ID
2
Press the G button and then
select Programme edit.
use
D
or
E button to
.
1
3
Press the G button.
Auto programme
Manual programme
Programme edit
Deleting
4
a.
Select
a
a
programme
(In Analogue
Mode
Only)
programme to be deleted with the DE
Signal strength
Booster
G
Selection ( G or
) leads
you to the programme edit
screen.
b. Press the R E D button twice. The selected programme is deleted, all the following programmes
shifted up
one
position.
SETUP
(
Set ID
FG button.
are
TVMENU
/
2
PROGAME
)
Copying
a.
Select
a
a
programme
(In Analogue
programme to be
copied
Mode
Only)
with the DEF
G button.
b. Press the GREEN button.
c.
Move the programme to the desired programme
number with the DEFG button.
d. Press the GREEN button
again
to copy the pro-
gramme. All the following programmes
down one position.
are
shifted
345
37
TV MENU
SETUP(Programme)
INPUT
Moving
a.
Select
a
Mode
(In Analogue
programme
Only)
programme to be moved with DEFG
a
button.
b. Press the YELLOW button.
c.
D/A
TV
POWER
INPUT
DVD
ARC
VCR
TEXT
PSM
GUIDE
INFO
Move the programme to the desired programme
number with the DEFG button.
d. Press the YELLOW button
to release this
again
function.
LIST
MENU
EXIT
Skipping
a.
Select
a
SLEEP
programme number
programme number to be
a
I/II
skipped
with D
OK
EFG button.
b. Press the BLUE button. The
skipped
programme
number turns to blue.
c.
Q.VIEW
Press the B L U E button
again
VOL
to release the
PR
MUTE
skipped
When
a
programme.
programme number is
skipped
it
means
that
butyou will be unable to select it using the PR+ /
ton during normal TV viewing. If you want to select
123
-
the
skipped
programme,
directly
enter the pro-
gramme number with the NUMBER buttons
TVMENU
it in the programme edit
Selecting
/
a.
SETUP
Favourite
or
table
or
select
menu.
Programme
Select your favourite programme number with DE
FG button and then press the F A V button. It will
include the selected programme into
your favourite programmes list and a heartmark will
appear in front of that programme number. You can
automatically
(
PROGAME
store up to 10 programmes.
)
5
38
Repeatedly
press the F A V button to select stored
favourite programmes in normal TV
viewing.
456
789
APM
0
FAV
CALLING UP THE PROGRAMME TABLE
check the programmes stored in the memory
displaying the programme list.
You
can
by
INPUT
D/A
TV
POWER
INPUT
DVD
ARC
VCR
TEXT
PSM
GUIDE
INFO
programme list
Displaying
Press the L I S T button to
table
display
the
Programme
LIST
menu.
MENU
EXIT
The programme table appears
on
the
I/II
SLEEP
screen.
OK
!
NOTE
Q.VIEW
G You may find
They
or
blue programmes.
have been set up to be skipped
VOL
PR
some
MUTE
by
auto
programming
in the programme edit mode.
123
G Some programmes with the channel number shown in the
programme LIST indicate there is
no
station
name
456
assigned.
789
APM
Selecting
a
programme in the programme table
0
FAV
TVMENU
/
1
Select
a
programme with the DEFG button.
SETUP
(
2
The set switches to the chosen programme number.
PROGAME
)
Paging through
a
programme table
Press the PR+ /
-
button to
changes
current page
1
into
2
Press the LIST button to return to normal TV
previous/next
page.
viewing.
39
TV MENU
SETUP(Programme)
DIGITAL SIGNAL STRENGTH
-
In
Digital Mode only
INPUT
D/A
Reveals how strong your DTV
need to adjust your antenna.
signal
is and whether you
TV
POWER
INPUT
DVD
ARC
VCR
TEXT
PSM
GUIDE
INFO
The
higher the signal strength, the less likely you are to
experience picture degradation.
Digital TV Signals; May not be available in all areas, nor
broadcast all programmes.
LIST
MENU
I/II
EXIT
SLEEP
OK
Auto programme
1
Press the MENU button and then
ton to select the SETUP
use
D
or
E but-
Manual programme
Programme edit
menu.
Signal strength
Booster
Set ID
2
TVMENU
/
SETUP
(
Press the G button and then
select
Signal strength
use
D
or
E button to
.
1
3
View the
the
on-screen
strength
of the
signal strength monitor to
signal being received.
see
Auto programme
Manual programme
Programme edit
Bad
Normal
Good
Signal strength
Booster
Set ID
PROGAME
)
40
2
BOOSTER
-
Digital Mode only
In
INPUT
D/A
If the
reception
is poor at the
fringed area of TV signal,
picture condition is
TV
POWER
INPUT
DVD
ARC
VCR
select Booster to On. When the
good,
do not select Booster to On
TEXT
PSM
GUIDE
INFO
.
LIST
MENU
I/II
EXIT
SLEEP
OK
Auto programme
1
Press the MENU button and then
ton to select the SETUP
use
D
or
E but-
Manual programme
Programme edit
menu.
Signal strength
Booster
Set ID
2
Press the G button and then
select
Booster
use
D
or
E button to
.
1
3
Press the G button and then
select Off
or
On
use
D
or
E button to
Auto programme
Manual programme
.
Programme edit
SETUP
Signal strength
Booster
4
Press E X I T button to return to normal TV
viewing.
Set ID
TVMENU
/
G
Off
On
(
23
PROGAME
)
41
TV MENU
PICTURE
ADJUSTMENT
PICTURE STATUS MEMORY
(PSM)
INPUT
D/A
TV
POWER
INPUT
This function
adjusts
the set to the best
picture
appearance.
DVD
ARC
When
adjusting picture options (contrast, brightness, colour,
sharpness and tint) manually, PSM is automatically changed to
TEXT
VCR
PSM
GUIDE
INFO
User.
options Dynamic, Standard, and
programmed for good picture quality at
Picture
be
Mild
the
are
preset and
and cannot
factory
changed.
LIST
MENU
EXIT
SLEEP
OK
1
2
TVMENU
You
Press the PSM button
appearance
repeatedly to
setup option: Dynamic
User1 ,or
User2
also
use
,
picture
Standard
,
Mild
,
.
Press the E X I T button to
can
select the
the PICTURE
save
and return to TV
menu
to
adjust
PSM
viewing.
.
/
PICTUREADJSMN
42
PSM
PSM
Colour temperature
Colour temperature
Standard
XD
XD
Mild
Advanced
Advanced
User1
Video preset
Video preset
User2
G
Dynamic
I/II
ADAPTIVE PICTURE MODE
VOL
(APM )
123
Allows you to select your preferred picture mode after compairing the four different picture (Dynamic, Standard, Mild, and
User1
PR
MUTE
456
(or User2)) settings.
789
0
APM
Press the A P M button at
1
once.
The
screen
FAV
is divided to
4-split.
Use the DEFG button to
2
By pressing
4
navigate
the OK button, you
can
screen.
select the desired
mode.
!
NOTE
G While
operating
the
4-split,
any button
OK, EXIT, DEFG VOLUME DE
,
remote control
G APM
screen
will
seconds unless
are
,
Dynamic
Standard
Mild
User1
except POWER, APM,
MUTE button
on
the
D
F
G
E
Navigate
Select
EXIT
Exit
not usable.
automatically disappear
a button is
pressed.
12
after approx. 40
TVMENU
/
BRIGHTNESS
Adjust
the
brightness
ADJUSTMENT
with
using
this button
on
the remote control.
INPUT
D/A
2
Press the
Adjust
the desired
TV
INPUT
DVD
ARC
VCR
TEXT
1
POWER
PSM
GUIDE
INFO
button.
screen
PICTUREADJSMN
brightness.
12
43
TV MENU
PICTURE
ADJUSTMENT
MANUAL PICTURE CONTROL
( PSM-User option )
You
INPUT
D/A
adjust picture Contrast, Brightness,Colour,
Sharpness, and Tint options to the levels you prefer.
can
TV
POWER
INPUT
DVD
ARC
VCR
TEXT
PSM
GUIDE
INFO
In NTSC AV,
Component 60Hz, RGB-DTV 60Hz,
HDMI/DVI-DTV 60Hz, RGB-PC, HDMI/DVI-PC mode, Tint
is available.
The
adjustment for PICTURE menu (Contrast, Brightness,
Colour, Sharpness, and Tint) affect both the main and sub
picture in PIP or Twin Picture mode.
LIST
MENU
I/II
EXIT
SLEEP
OK
PSM
1
Press the MENU button and then
to select the PICTURE
use
D
E button
or
Colour temperature
XD
menu.
Advanced
Video preset
2
Press the G button and then
use
D
or
E button to
select PSM.
1
TVMENU
3
Press the G button and then
select User
1
or
User
2
use
D
or
E button to
PSM
Dynamic
Colour temperature
Standard
.
XD
Mild
Advanced
/
User 1
Video preset
PICTUREADJSMN
4
Press the G button and then
use
D
or
user
G
2
E button to
select the desired
picture option ( Contrast
Brightness, Colour, Sharpness, or Tint )
,
.
23
5
Press the G button and then
make
6
use
F
or
G button to
appropriate adjustments.
Press EXIT button to return to normal TV
viewing.
User1
Contrast
85
Brightness
50
Colour
50
Sharpness
50
Tint
Press MENU
G
R
0
G
to confirm.
4
Contrast
85
F
G
E
44
5
XD
INPUT
D/A
XD is LG Electronic's
unique picture improving technology
display a real HD source through an advanced digital
signal processing algorithm.
TV
POWER
INPUT
DVD
ARC
VCR
to
When
selecting PSM options (Dynamic, Standard
Mild), XD is automatically change to Auto.
But when
can
PSM
selecting
2),
you
LIST
choose the Auto / Manual.
When
PSM
GUIDE
INFO
and
1 and User
options (User
TEXT
MENU
I/II
EXIT
the Manual, you
trast, XD colour and XD noise.
selecting
can
adjust
the XD
SLEEP
conOK
PSM
1
Press the MENU button and then
to select the PICTURE
use
D
or
E button
Colour temperature
XD
menu.
Advanced
Video preset
2
Press the G button and then
select
use
D
or
E button to
X D.
1
3
Press the G button and then
select Auto
or
Manual
use
D
or
E button to
.
TVMENU
/
the Manual
Selecting
1. Press the G button and then
use
ton to select XD contrast, XD
XD
F
or
G but-
colour
or
noise.
XD
PSM
Colour temperature
XD
contrast:
Optimizing
automatically according
the contrast
to the
Video Preset
brightness
G
Manual
Advanced
of
the reflection.
XD contrast
On
XD colour
On
XD noise
On
XD colour:
Adjusting the colors of the
reflection automatically to reproduce as
closely as possible to the natural colors.
XD
PICTUREADJSMN
23
Removing the noise up to the
where it does not damage the original
noise
:
point
picture.
2. Use the D
4
or
E button to select On
or
Press E X I T button to return to normal TV
Off.
viewing.
45
TV MENU
PICTURE
ADJUSTMENT
COLOUR TEMPERATURE CONTROL
INPUT
D/A
Auto Colour
Temperature Control
DVD
ARC
VCR
TEXT
Choose
warm
to
one
of three automatic color
to enhance hotter colors such
see
less intense colors with
more
adjustments.
as
red,
TV
POWER
INPUT
PSM
GUIDE
INFO
Set to
set to cool
or
blue.
LIST
MENU
I/II
EXIT
SLEEP
OK
PSM
1
Press the MENU button and then
to select the PICTURE
use
D
E button
or
Colour temperature
XD
menu.
Advanced
Video preset
Press the G button and then
2
TVMENU
use
D
or
E button to
select Colour temperature.
1
3
Press the G button and then
,
/
use
D
or
E button to
select either Warm Medium Cool ,or User
,
.
PSM
Colour temperature
PICTUREADJSMN
46
Press EXIT button to return to normal TV
4
viewing.
G
Warm
XD
Medium
Advanced
Cool
Video preset
User
23
INPUT
D/A
Manual Colour
You
can
also
by selecting
adjust
the detailed
the User
INPUT
DVD
ARC
VCR
TEXT
Temperature Control
TV
POWER
PSM
GUIDE
INFO
settings (Red, Green, Blue)
menu.
LIST
MENU
I/II
EXIT
SLEEP
OK
PSM
Colour temperature
XD
1
Press the MENU button and then
to select the PICTURE
D
or
E button
Advanced
Video preset
menu.
Press the G button and then
2
use
use
D
or
E button to
select Colour temperature.
1
PSM
Colour temperature
3
Press the G button and then
select User
use
D
or
E button to
Warm
XD
Medium
Advanced
Cool
Video preset
User
.
G
TVMENU
/
4
Press the G button and then
select Red Green ,or Blue
,
use
D
or
E button to
.
23
User
Press the G button and then
5
make
The
use
F
or
G button to
appropriate adjustments.
adjustment
range of Red, Green,
or
Red
0
Green
0
Blue
0
G
Blue
is -20~+20.
Press MENU
PICTUREADJSMN
to confirm.
4
6
Press EXIT button to return to normal TV
viewing.
Red
0
F
G
E
5
47
TV MENU
PICTURE
ADJUSTMENT
ADVANCED-CINEMA
INPUT
D/A
Set up the TV for the best
picture
appearance for
viewing
TV
POWER
INPUT
DVD
ARC
VCR
movies.
TEXT
PSM
GUIDE
INFO
This feature operates only in AV1-2 60Hz and
Component480i mode.
LIST
I/II
MENU
EXIT
SLEEP
OK
PSM
1
Press the MENU button and then
to select the PICTURE
use
D
or
E button
Colour temperature
XD
menu.
Advanced
Video preset
Press the G button and then
2
TVMENU
use
D
or
E button to
select Advanced.
1
Press the G button and then
3
/
select Cinema
use
D
or
E button to
PSM
.
Colour temperature
XD
PICTUREADJSMN
48
Advanced
4
5
Press the G button and then
select On
or
use
D
or
E button to
Video preset
G
Off
Cinema
Black level
Auto
Off.
Press EXIT button to return to normal TV
viewing.
2
34
ADVANCED-BLACK LEVEL
INPUT
D/A
Adjusting the contrast and the brightness
using the black level of the screen.
This feature operates
mode.
only
in
AV1, AV2,
of the
screen
TV
POWER
INPUT
DVD
ARC
VCR
TEXT
PSM
GUIDE
INFO
HDMI/DVI
or
LIST
MENU
I/II
EXIT
SLEEP
OK
PSM
1
Press the MENU button and then
to select the PICTURE
use
D
or
Colour temperature
E button
XD
menu.
Advanced
Video preset
Press the G button and then
2
select Advanced
use
D
or
E button to
.
1
Press the G button and then
3
use
D
or
E button to
select Black level.
PSM
TVMENU
/
Colour temperature
XD
Advanced
Press the G button and then
4
select Auto Low ,or
,
High
use
D
or
E button to
Video preset
G
Off
Cinema
Black level
Auto
.
Auto
Realizing the black level of the
High or Low automatically.
screen
and set it to
Low
The reflection of the
screen
gets darker.
screen
gets brighter.
2
34
PICTUREADJSMN
High
The reflection of the
Press EXIT button to return to normal TV
5
viewing.
49
TV MENU
PICTURE
ADJUSTMENT
VIDEO PRESET
INPUT
D/A
quickly reset all the Picture
original factory preset values.
Use to
menu
options
to their
TV
POWER
INPUT
DVD
ARC
VCR
TEXT
PSM
LIST
GUIDE
MENU
INFO
I/II
EXIT
SLEEP
OK
PSM
1
Press the MENU button and then
to select the PICTURE
use
D
or
E button
Colour temperature
XD
menu.
Advanced
Video preset
Press the G button and then
2
TVMENU
/
use
D
or
E button to
select Video preset.
1
3
Press the G button to reset the
to
original
picture
menu
options
values.
PSM
Colour temperature
XD
PICTUREADJSMN
50
Advanced
Video preset
G
Selection ( G
the video
or
) presets
configuration.
23
AUDIO
TV MENU
ADJUSTMENT
SOUND STATUS MEMORY
SSM lets you
enjoy
the best sound without any
because the TV sets the
adjustment
options based
D/A
TV
POWER
INPUT
DVD
ARC
VCR
sound
TEXT
PSM
GUIDE
INFO
the programme content.
on
adjusting sound options (treble
is automatically changed to User.
and
bass) manually,
Standard, Music, Movie, and Sports
are
preset for good
sound
not
adjustable.
quality
INPUT
special
appropriate
When
SSM
(SSM)
at the
factory
and
are
LIST
MENU
EXIT
I/II
SLEEP
OK
SSM
1
Press the MENU button and then
to select the AUDIO
use
D
or
E button
AVL
Balance
menu.
TV
Press the G button and then
2
select SSM
use
D
or
Speaker
E button to
.
1
Press the G button and then
3
select Standard Music
,
,
use
Movie
D
,
or
E button to
Sports ,or
User
.
SSM
AVL
Balance
4
Press EXIT button to return to normal TV
viewing.
TVMENU
/
TV
Speaker
G
Standard
Music
Movie
Sports
User
23
AUDIOJSTMEN
51
TV MENU
AUDIO
ADJUSTMENT
MANUAL SOUND CONTROL
( SSM-User option )
Adjust
the sound to suit your taste and
INPUT
D/A
situations.
room
TV
POWER
INPUT
DVD
ARC
VCR
TEXT
PSM
LIST
GUIDE
MENU
EXIT
INFO
I/II
SLEEP
OK
SSM
1
Press the MENU button and then
to select the AUDIO
use
D
or
E button
AVL
Balance
menu.
TV
Press the G button and then
2
TVMENU
select SSM
use
D
or
E button to
.
1
Press the G button and then
3
select User
use
D
or
E button to
SSM
Standard
.
/
AVL
Music
Balance
TV
AUDIOJSTMEN
Speaker
4
Press the G button and then
select the desired sound
Front surround
use
option
D
or
Movie
Speaker
Sports
E button to
User
G
( Treble Bass ,or
,
).
23
User
Treble
50
Bass
50
Front surround
Press
MENU
G
Off
to confirm.
4
52
5
Press the G button and then
make
F
or
G button to
appropriate adjustments.
Selecting
the Front
surround
Press the G button and then
select Off
XT
use
or
use
SRS ( Sound Retrieval
F
or
G button to
System) TruSurround
.
Front Surround
SRS TruSurround XT
TVMENU
/
6
Press EXIT button to return to normal TV
SRS TruSurround
viewing.
XT
Takes
advantage of any multi-channel format without
needing to add extra speakers or equipment. Dialog clari-
AUDIOJSTMEN
ty, bass enrichment, and the addition of stereo audio
enhancement
produces
an
immersive sound
experience
from standard stereo material.
53
TV MENU
AUDIO
ADJUSTMENT
AUTO VOLUME LEVELLER
AVL
you
automatically keeps on
change programmes.
an
equal
(AVL)
volume level
even
INPUT
D/A
if
TV
POWER
INPUT
DVD
ARC
VCR
TEXT
PSM
LIST
GUIDE
MENU
EXIT
INFO
I/II
SLEEP
OK
SSM
1
Press the MENU button and then
to select the AUDIO
use
D
or
E button
AVL
Balance
menu.
TV
2
TVMENU
Press the G button and then
select AVL
use
D
or
E button to
.
1
3
Press the G button and then
select Off
or
On
use
D
or
E button to
.
/
SSM
AVL
Balance
AUDIOJSTMEN
54
Speaker
4
Press EXIT button to return to normal TV
viewing.
TV
G
Off
On
Speaker
23
BALANCE
INPUT
D/A
Adjust
and
the
room
sound of
left/right
speaker
to suit your taste
TV
POWER
INPUT
DVD
ARC
VCR
situations.
TEXT
PSM
LIST
GUIDE
MENU
EXIT
INFO
I/II
SLEEP
OK
SSM
1
Press the MENU button and then
to select the AUDIO
use
D
or
E button
AVL
Balance
menu.
TV
2
Press the G button and then
select Balance
use
D
or
Speaker
E button to
.
1
3
Press the G button and then
make
use
F
or
G button to
SSM
appropriate adjustments.
AVL
Balance
TV
4
Press EXIT button to return to normal TV
TVMENU
/
0
L
R
Speaker
viewing.
2
Balance
0
L
AUDIOJSTMEN
R
3
55
TV MENU
AUDIO
ADJUSTMENT
TV SPEAKERS ON/OFF SETUP
INPUT
D/A
Turn the TV
speakers
off if
using
external audio
equipment.
AV1-2, Component1-2, RGB PC/DTV and HDMI/DVI
mode, the audio signal can be outputted even though
In
there is
no
video
TV
POWER
INPUT
DVD
ARC
VCR
TEXT
PSM
GUIDE
INFO
signal.
LIST
MENU
EXIT
I/II
SLEEP
OK
SSM
1
Press the MENU button and then
to select the AUDIO
use
D
or
E button
AVL
Balance
menu.
TV
2
Press the G button and then
select TV
TVMENU
Speaker
use
D
or
Speaker
E button to
.
1
3
Press the G button and then
select Off
/
or
On
use
D
or
E button to
.
SSM
AUDIOJSTMEN
56
AVL
4
Press EXIT button to return to normal TV
viewing.
Balance
TV
Speaker
G
Off
On
23
STEREO RECEPTION
-
In
Analogue Mode only
Mono sound selection
If the stereo
signal is weak in stereo reception, you can switch to
by pressing the III button twice. In mono reception, the
depth of sound is improved. To switch back to stereo, press the
III button twice again.
mono
INPUT
D/A
INPUT
DVD
ARC
VCR
TEXT
Broadcast
On Screen
TV
POWER
PSM
GUIDE
INFO
Display
Mono
MONO
Stereo
MONO / STEREO
LIST
MENU
EXIT
I/II
SLEEP
OK
Q.VIEW
VOL
PR
MUTE
123
SOUND OUTPUT SELECTION
456
789
In AV
1-2, Component 1-2, RGB-PC/DTV
can
you
or
select output sound for the left and
Repeatedly
press the III button to select the sound
L+R: Audio
from audio L
signal
speaker and audio signal
loud speaker.
L+L: Audio
HDMI/DVI mode,
right loudspeakers.
signal
input
from audio R
from audio L
input
output.
is sent to the left loud
input
is sent to the
is sent to left and
right
right
loud
speakers.
R+R: Audio
signal
from audio R
input
is sent to left and
right
APM
0
TVMENU
/
FAV
AUDIOJSTMEN
loud
speakers.
!
NOTE
digital mode, repeatedly press the I / I I button to
change the audio mode (MPEG or DOLBY DIGITAL).
G In
57
TV MENU
TIME SETTING
AUTO CLOCK SETUP
INPUT
D/A
The time is
automatically
set from
a
digital
channel
The
digital channel signal includes information for
rent time provided by the broadcasting station.
Set the clock
by
manually,
if the current time is set
signal.
the
cur-
TV
POWER
INPUT
DVD
ARC
VCR
TEXT
PSM
GUIDE
INFO
incorrectly
the auto clock function.
LIST
MENU
I/II
EXIT
SLEEP
OK
Auto clock
1
Press the MENU button and then
to select the TIME
use
D
or
E button
Manual clock
Off time
menu.
On time
2
TVMENU
Press the G button and then
use
D
or
timer
sleep
E button to
select Auto clock.
1
3
Press the G button and then
select On
use
D
or
E button to
Auto clock
.
/
Manual clock
Off time
TIMES NG
Sleep
Auto
G
Off
On
Time Zone
NSW/ACT
On time
4
Press the G button and then
select your
viewing
area
time
use
D
or
E button to
zone:
NSW ACT NT TAS WA SA QLD ,or VIC
,
5
,
,
,
,
Press EXIT button to return to normal TV
Sleep
timer
Auto
sleep
.
2
viewing.
Auto clock
Off
Manual clock
On
Off time
Time Zone
D
E
NSW/ACT
On time
Sleep
timer
Auto
sleep
34
58
MANUAL CLOCK SETUP
INPUT
D/A
If the current time
is wrong, reset the clock
setting
manu-
ally.
TV
POWER
INPUT
DVD
ARC
VCR
TEXT
PSM
LIST
GUIDE
INFO
I/II
MENU
EXIT
SLEEP
OK
Auto clock
1
Press the MENU button and then
to select the TIME
use
D
or
E button
Manual clock
Off time
menu.
On time
2
Press the G button and then
select Manual clock
use
D
or
Sleep
timer
Auto
sleep
E button to
.
1
3
Press the G button and then
use
F
or
G to select
either the year, date, or time option. Once selected,
use the
D or E button to set the year, date, and time
Auto clock
Manual clock
options.
Off time
On time
4
Press EXIT button to return to normal TV
viewing.
TVMENU
/
Sleep
timer
Auto
sleep
G
Year
----
Date--/--
Time--:--
--
TIMES NG
23
59
TV MENU
TIME SETTING
ON/OFF TIME SETUP
INPUT
D/A
The time function operates
been set.
only
if the current time has
TV
POWER
INPUT
DVD
ARC
VCR
TEXT
PSM
GUIDE
INFO
The Off-Time function overrides the On-Time function if
they
are
both set to the
The TV must be in
same
standby
time.
mode for the On-Time to work.
If you do not press any button within 2 hours after the TV
on with the On Time function, the TV will automati-
turns
cally
revert to
standby
LIST
I/II
MENU
EXIT
mode.
SLEEP
OK
1
Press the MENU button and then
to select the TIME
use
D
or
E button
menu.
Auto clock
Manual clock
2
3
TVMENU
select Off Time
or
On Time
Press the G button and then
select On
4
use
D
or
E button to
Off time
On time
.
use
D
or
timer
sleep
E button to
Press the G button and then
function, select
use
D
or
Off
.
E button to
1
Auto clock
Manual clock
set the hour.
Off time
On Time
5
Sleep
Auto
.
To cancel the On Off time
/
TIMES NG
Press the G button and then
Press the G button and then
use
D
or
E button to
Sleep
timer
Auto
sleep
G
Off
On
Time6:30AM
PR
Only
On time
Press the G button and then
use
D
or
E to select
use
D
or
E to set the
the programme at turn-on.
Press the G button and then
sound level at turn-on.
7
60
17
set the minutes.
2
6
0
ANALOGUE
Vol
Press EXIT button to return to normal TV
viewing.
3
4
56
SLEEP TIMER
INPUT
D/A
You don't have to remember to switch the set off before you go
to
sleep.
The
sleep
DVD
ARC
VCR
TEXT
timer
the preset time
automatically
has elapsed.
switches the set to
standby
TV
POWER
INPUT
PSM
GUIDE
INFO
after
LIST
MENU
EXIT
I/II
SLEEP
OK
1
2
Press the SLEEP button
Off
repeatedly
the
to select the number of minutes. First the
followed
option appears
options : 10, 20, 30, 60, 90, 120, 180,
on
screen,
by
the
following sleep
timer
and 240 minutes.
When the number of minutes you want is displayed on the screen, press the
SLEEP button. The timer begins to count down from the number of minutes
selected.
3
To check the
button
remaining
minutes before the TV turns
off, press the
TVMENU
SLEEP
once.
/
4
To cancel the
5
When you swtch the set
You
can
press the SLEEP button
Sleep Timer,
also set up the
Sleep
off, the
set release the
timer in the TIME
repeatedly
to select Off
preset sleep
.
time.
TIMES NG
menu.
Auto clock
Auto clock
Manual clock
Manual clock
10 min
Off time
Off time
20 min
On time
On time
Sleep
timer
Sleep
timer
Auto
sleep
Auto
sleep
Off
30 min
G
60 min
90 min
120 min
180 min
240 min
61
TV MENU
TIME SETTING
AUTO SLEEP
INPUT
D/A
If set to
on
and there is
automatically
no
input signal,
the TV turns off
TV
POWER
INPUT
DVD
ARC
VCR
after 10 minutes.
TEXT
PSM
LIST
GUIDE
MENU
INFO
I/II
EXIT
SLEEP
OK
Auto clock
1
Press the MENU button and then
to select the TIME
use
D
or
E button
Manual clock
menu.
Off time
On time
2
TVMENU
Press the G button and then
select Auto
sleep
use
D
or
Sleep
timer
Auto
sleep
E button to
.
1
3
Press the G button and then
select Off
or
On
use
D
or
E button to
.
/
Auto clock
Manual clock
TIMES NG
Off time
4
Press EXIT button to return to normal TV
viewing.
On time
Sleep
timer
Auto
sleep
G
Off
On
23
62
TV MENU
OPTIONAL FEATURES
INPUT SOURCE SELECTION
INPUT
D/A
Alternatively you can select the Digital, Analogue, AV1-2,
Component 1-2, RGB-PC (or RGB-DTV) or HDMI/DVI
mode by pressing the INPUT button.
Press the D/A INPUT button to select
digital
TV
POWER
INPUT
DVD
ARC
VCR
TEXT
PSM
GUIDE
INFO
analogue
or
mode.
LIST
I/II
MENU
EXIT
SLEEP
OK
Input
1
Press the MENU button and then
to select the SPECIAL
use
D
or
E button
Subtitle
Child lock
menu.
ARC
XD demo
ISM method
2
Press the G button and then
select Input
use
D
or
E button to
Low power
.
1
3
Press the G button and then
use
D
or
E to select
Digital, Analogue, AV 1 AV 2 Component 1,
Component 2, RGB-PC, RGB-DTV, or HDMI/DVI.
,
,
toggle RGB-DTV and RGB-PC, select
DTV(or RGB-PC) and press G button.
To
RGB-
Input
Subtitle
Child lock
4
G
Digital
Analogue
AV1
AV2
ARC
Component1
XD demo
Component2
ISM method
RGB-PC
Low power
Press EXIT button to return to normal TV
TVMENU
/
HDMI/DVI
viewing.
23
OPTINALFEURS
63
TV MENU
OPTIONAL FEATURES
SUBTITLE
-
In
Digital Mode only
INPUT
D/A
You
can
select Subtitle
on or
off with the TEXT button in
TV
POWER
INPUT
DVD
ARC
VCR
DTV mode.
TEXT
PSM
LIST
GUIDE
MENU
EXIT
INFO
I/II
SLEEP
OK
Input
1
Press the MENU button and then
to select the SPECIAL
use
D
or
E button
Subtitle
menu.
Child lock
ARC
XD demo
ISM method
2
TVMENU
Press the G button and then
select Subtitle
use
D
or
E button to
Low power
.
1
3
Press the G button and then
select Off
or
On
use
D
or
E button to
.
Input
/
Subtitle
Child lock
G
Off
On
ARC
OPTINALFEURS
64
4
Press EXIT button to return to normal TV
viewing.
XD demo
ISM method
Low power
23
CHILD LOCK
INPUT
D/A
The TV
can
be set
so
that the remote control is needed to
control it. This feature
rized
can
be used to prevent unautho-
TV
POWER
INPUT
DVD
ARC
VCR
TEXT
PSM
GUIDE
INFO
viewing.
LIST
MENU
EXIT
I/II
SLEEP
OK
Input
Press the MENU button and then
1
to select the SPECIAL
use
D
E button
or
Subtitle
Child lock
menu.
ARC
XD demo
ISM method
Press the G button and then
2
select Child lock
use
D
or
E button to
Low power
.
1
Press the G button and then
3
select Off
or
O
use
D
or
E button to
n.
Input
TVMENU
/
Subtitle
Child lock
ARC
Press EXIT button to return to normal TV
4
viewing.
G
Off
On
XD demo
ISM method
Low power
23
!
NOTE
G With the lock on, the
appears
panel
G The
the
is
the
on
pressed
display
screen
pressed
display
:
On'
if any button on the front
while viewing the TV.
screen
'Child lock
if any button
while
'Child lock
OPTINALFEURS
displaying
:
on
On' will not appear
the front
the
panel
on
is
menus.
65
TV MENU
OPTIONAL FEATURES
PICTURE FORMAT
INPUT
D/A
You
can
watch TV in various
Zoom and Cinema
picture formats; Auto, 4:3,
16:9
(Wide), 14:9,
DVD
ARC
VCR
zoom.
TEXT
!
TV
POWER
INPUT
PSM
GUIDE
INFO
NOTE
G If
image is displayed on the screen for a long time, it image may
imprinted on the screen and remain visible.
This phenomenon is common to all manufactures and in consequence the
manufactures warranty does not cover the product bearing this phenomenon.
a
fixed
become
LIST
MENU
I/II
EXIT
SLEEP
OK
Press the ARC button
1
You
can
also
adjust
repeatedly
to select the desired
ARC in the SPECIAL
picture
format.
menu.
Auto
Zoom
Selects the proper
match the source's
Choose Zoom when you want to view the
picture without any alteration. However, the
picture proportion to
4:3, 16:9
image. ( 4:3
16:9 )
top and bottom portions of the picture will be
4:3
You
Choose 4:3 when you want to view
with an original 4:3 aspect ratio.
button. The
cropped.
TVMENU
/
picture
a
can move
the Zoom
adjustment
screen
using
range is -16
-
D
or
E
+16.
Cinema Zoom
Choose Cinema Zoom when you want to
enlarge the picture in correct proportion.
16:9
OPTINALFEURS
Adjust the picture horizontally, in
portion to fill the entire screen.
a
linear pro-
You
14:9
The
You
size is,
screen
sides,
to create
can move
button. The
!
a
more
enlarged at
spectacular view.
the 14:9
adjustment
screen
using
range is -10
The
D
or
can
or
reducing
the
picture,
may become distorted.
adjust
Cinema Zoom
both
-
image
enlarging
the
enlarge proportion
using
adjustment
D
or
of
E button.
range is 1-16.
E
+10.
NOTE
G In
HDMI/DVI-PC and RGB-PC mode, 4:3 and 16:9 is available.
G Auto: When your TV receives the wide
to be sent.
66
Note: When
the
(Not
available in all
screen
countries)
signal,
it will be
automatically changed
to the
picture
format
XD DEMO
INPUT
D/A
Allows you to select your preferred picture mode after
compairing the four different picture (Dynamic, Standard,
TV
POWER
INPUT
DVD
ARC
VCR
TEXT
PSM
GUIDE
INFO
Mild, and User1 (or User2)) settings.
LIST
I/II
MENU
EXIT
SLEEP
OK
Input
1
Press the MENU button and then
to select the SPECIAL
use
D
or
E button
Subtitle
Child lock
menu.
ARC
XD demo
ISM method
2
Press the G button and then
select XD demo
use
D
or
E button to
Low power
.
1
3
Press the G button to start XD demo.
TVMENU
/
Input
Subtitle
4
Press EXIT button to
stop
XD demo.
Child lock
ARC
XD demo
G
Selection ( G or)
leads you to the XD
ISM method
demo.
Low power
23
Dynamic
Standard
Mild
User1
Press
EXIT
OPTINALFEURS
to end.
67
TV MENU
OPTIONAL FEATURES
( Image Sticking Minimization)
ISM
A frozen still
the
Use
image.
on
1
the
picture
from
PC/video game
a
for
screen
prolonged periods
our
unique method to
METHOD
INPUT
D/A
displayed on
a
ghost
any fixed image
TV
POWER
INPUT
DVD
ARC
VCR
will result in
minimize
TEXT
PSM
GUIDE
INFO
screen.
Press the MENU button and then
to select the SPECIAL
D
use
or
LIST
E button
MENU
I/II
EXIT
SLEEP
menu.
OK
2
3
Press the G button and then
select ISM method
use
D
or
E button to
use
D
or
E button to
.
Press the G button and then
select either Normal White wash Orbiter
,
,
Input
Subtitle
or
Child lock
Inversion.
ARC
XD demo
Normal
If
ISM method
image sticking
essary
is
never a
problem,
ISM is not
Low power
nec-
set to Normal.
-
Orbiter
TVMENU
1
Orbiter may help prevent ghost images. However, it
is best not to allow any fixed image to remain on the
screen.
/
the
To avoid
image
will
a
permanent image
move once
on
the
screen,
per 2 minutes.
Input
Inversion
OPTINALFEURS
Subtitle
Inversion will
panel
automatically
invert the
plasma display
color every 30 minutes.
XD demo
ISM method
White wash
Low power
White Wash
removes
permanent images from the
G
Normal
Orbiter
Inversion
White Wash
screen.
!
23
NOTE
permanent image may be impossible
entirely with White Wash. To return to norviewing, press any button.
G An excessive
to clear
mal
4
68
Child lock
ARC
Press EXIT button to return to normal TV
viewing.
LOW POWER
INPUT
D/A
Low power reduces the
plasma display
power
consumption.
TV
POWER
INPUT
DVD
ARC
VCR
TEXT
PSM
LIST
GUIDE
MENU
INFO
I/II
EXIT
SLEEP
OK
Input
1
Press the MENU button and then
to select the SPECIAL
use
D
or
E button
Subtitle
Child lock
menu.
ARC
XD demo
ISM method
2
Press the G button and then
select Low
power
use
D
or
E button to
Low power
.
1
3
Press the G button and then
select Off
or
On
use
D
or
E button to
Input
.
Subtitle
When you select On the
,
screen
darkens.
Child lock
ARC
XD demo
ISM method
4
Press EXIT button to return to normal TV
Low power
viewing.
TVMENU
/
G
Off
On
23
OPTINALFEURS
69
TV MENU
LOCK
ADJUSTMENT
SETTING UP YOUR PASSWORD
Set up
blocking schemes
viewing sources.
to block
specific channels, ratings,
and
external
A
password
1
is
required
to
gain
access
to this
Press the MENU button and then
to select the LOCK
Enter the
menu.
password
as
use
menu.
the D
Then, press the
or
G button.
requested.
Enter Password
The TV is set up with the initial
password
E button
*
*
**
"0-0-0-0".
LOCK SYSTEM
TVMENU
Enables
or
disables the
blocking
scheme you set up
previously.
/
LOCKADJUSTMEN
1
After
inputting
the
to choose Lock
password,
use
the D
or
Lock system
E button
Set
system.
password
Block programme
Parental
guidance
Aux. block
2
Press the G button and then
to select On
or
Off
use
the D
or
E button
.
When you select On the Lock
,
System
is enable.
1
Lock system
3
Press EXIT button to return to normal TV
viewing.
Set
password
G
Off
On
Block programme
Parental
guidance
Aux. block
2
70
SET PASSWORD
Change
the
password by inputting
After
1
inputting
to chooseSet
the
password,
a new
use
password
the D
or
twice.
Lock system
E button
Set
password.
password
Block programme
Parental
guidance
Aux. block
Press the G button and then choose any 4
2
new
your
As
4
password
soon as
digits
The
on
new
the 4
digits
are
the Confirm
password
digits
for
next to New.
entered,
re-enter the
same
1
.
is memorized.
Lock system
Set
password
Block programme
Parental
Press EXIT button to return to normal TV
3
!
viewing.
NOTE
G If you
on
ever
G
New
*
*
*
*
Confirm
*
*
*
*
guidance
Aux. block
2
forget your password, key
in
'7', '7', '7', '7'
TVMENU
/
the remote control.
LOCKADJUSTMEN
71
TV MENU
LOCK
ADJUSTMENT
BLOCK PROGRAMME
Select
a
channel number that you wish to block.
Lock system
After
1
inputting
the
password,
use
to choose Block programme
the D
or
E button
Set
password
Block programme
.
Parental
guidance
Aux. block
2
Press the G button. You will
now see a screen
with channel numbers and
preview picture.
a
filled
1
3
Use DEFG button to select
use
TVMENU
/
LOCKADJUSTMEN
the OK button to block
or
a
channel and then
Lock system
unblock it.
Set
password
Block programme
Parental
guidance
G
Selection (
G
or
) leads
you to the block programme
screen.
4
Press EXIT button to return to TV
MENU button to return to the
Aux. block
viewing
press
previous menu.
or
2
3
72
PARENTAL GUIDANCE
Prevents children from
grams,
according
-
In
Digital Mode only
watching certain children's
ratings limit set.
TV pro-
to the
Lock system
Set
1
After
inputting
the
password,
to choose Parental
use
the D
or
E button
password
Block programme
guidance.
Parental
guidance
Aux. block
Press the G button and then
2
selectG,PG, M,MA,
use
the D
or
E to
AV orR.
G
(General audience)
(Parental guidance suggested)
M (Mature audiences)
MA (Mature adult audiences)
AV (Adult audiences)
R (Restricted)
Blocking Off (Permits all programs)
1
PG
Lock system
Set
password
G
Block programme
Parental
guidance
G
PG
M
Aux. block
MA
AV
R
Blocking
3
Press EXIT button to return to normal TV
Off
viewing.
2
TVMENU
AUX. BLOCK
/
Enables you to select a source to block from the external
devices you have hooked up.
Lock system
source
Set
password
LOCKADJUSTMEN
Block programme
Parental
guidance
Aux. block
1
2
3
After
inputting
the
password,
to choose Aux. block
Press the G button and then
to select
use
the D
or
E button
use
the F
or
G button
.
1
a source.
Press the G button and then
to select On
or
Off
on
use
the each
the D
or
E button
source.
Lock system
Set
password
Parental
4
Press EXIT button to return to normal TV
AV1
Block programme
viewing.
guidance
Aux. block
G
On
AV2
On
Component1
Off
Component2
On
RGB
Off
HDMI/DVI
On
23
73
APPENDIX
EXTERNAL CONTROL DEVICE SETUP
Connect the RS-232C
control
system)
(serial port) input jack
to control the TV's functions
Note: RS-232C connection cables
RS-232C
are
not
to
an
externally.
supplied
Setup
RS-232C IN
DIGITAL AUDIO
OUT
(CONTROL SERVICE)
HDMI/DVI IN
OPTICAL
Type of Connector;
APENDIX
74
No.
Pin Name
D-Sub 9-Pin Male
1
No connection
2
RXD
3
TXD
( Receive data )
( Transmit data )
4
DTR
( DTE
5
GND
6
DSR
7
RTS
( DCE side ready)
( Ready to send )
8
CTS
( Clear to
9
No Connection
side
ready)
send )
1
5
6
9
external control device
with the TV.
(such
as a
computer
or an
A/V
RS-232C
Configurations
Configurations ( Standard
7-Wire
RS-232C cable )
PC
TV
RXD
2
3
3-Wire
TXD
Configurations ( Not
standard )
PC
TV
RXD
2
3
TXD
TXD
3
2
RXD
TXD
3
2
RXD
GND
5
5
GND
GND
5
5
GND
DTR
4
6
DSR
DTR
4
6
DTR
DSR
6
4
DTR
DSR
6
4
DSR
RTS
7
8
CTS
RTS
7
7
RTS
CTS
8
7
RTS
CTS
8
8
CTS
D-Sub 9
D-Sub 9
D-Sub 9
D-Sub 9
Set ID
Use this function to
Refer to 'Real Data
specify
a
TV ID number.
Mapping1'.
See page 77.
Press the MENU button and then
1
to select the SETUP
use
D
or
E button
Auto programme
menu.
Manual programme
Programme edit
Signal strength
Booster
2
3
Press the G button and then
use
D
or
E button to
use
D
or
E button to
APENDIX
Set ID
select Set ID.
Press the G button and then
adjust Set ID to choose the desired TV ID
adjustment range of Set ID is 1~99.
1
number.
Auto programme
The
Manual programme
Programme edit
Signal strength
4
Booster
Press EXIT button to return to TV
MENU button to return to the
viewing or press
previous menu.
Set ID
G
1
23
Communication Parameters
Baud rate
Data
Parity
:
9600
length
:
:
None
bps ( UART )
8 bits
Stopbit:1bit
Communication code
Use
a
crossed
:
ASCII code
(reverse)
cable.
75
APPENDIX
Command Reference List
COMMAND1
01. Power
k
a
k
b
Ratio
k
c
04. Screen Mute
k
d
02.
03.
Select
COMMAND2
Input
Aspect
DATA
s
0~64
(Hexadecimal)
0~1
15. Bass
k
0~8
16. Balance
k
t
0~64
17. Colour
k
u
0~2
k
v
0~C8
k
w
0~C8
See
p.77
0~1
18. Red
19. Green
Temperature
Adjustment
Adjustment
k
e
0~1
06. Volume Control
k
f
0~64
20. Blue
k
$
0~C8
j
p
0~3
j
q
0~1
Adjustment
07. Contrast
k
g
0~64
21. ISM Method
08.
k
h
0~64
22. Low Power
23. Orbiter Time
Brightness
09. Colour
k
i
0~64
10. Tint
k
j
0~64
11.
k
k
0~64
k
l
0~1
Sharpness
13. Remote Control/
k
Key Lock
0~1
m
k
Transmission /
Receiving
][Set ID][
[Command 1]
[Command 2]
:
Second command to control the set.
You
can
adjust
number in
When
Setup
selecting
99 )
:
on menu
set.(j, k,
m or
menu.
Set ID
Adjustment
and
as
range is 1~99.
[Cr]
as
Hexa decimal
decimal ( 1~
( 0x0~0x63 )
transmission/receiving protocol.
To transmit command data.
Carriage
Return
ASCII code '0x0D'
[
]
:
ASCII code
'space (0x20)'
js
1~3
Tuning
26. Send IR Code
Input
Select
m
a
See
p.79
m
c
See
p.79
x
b
See
p.79
Acknowledgement
][Set ID][
The TV transmits ACK
mat when
receiving
][OK][Data][x]
(acknowledgement)
based
on
this for-
normal data. At this time, if the data is
data read mode, it indicates present status data. If the data is
data write mode, it returns the data of the PC computer.
'0', every connected the TV
Transmit 'FF' data to read status of comand.
:
x)
the seIDtochoosedesired TV ID
is controlled. Set ID is indicated
[DATA]
25. Channel
[Command2][
][Data][Cr]
First command to control the
on
Setting
Protocol
:
:
1~FE
24. Orbiter Pixel
OK
[Command1][Command2][
jr
0~64
r
Transmis sion
[Set ID]
Setting
27.
14. Treble
Error
Acknowledgement
[Command2][
][Set ID][
The TV transmits ACK
mat when
or
receiving
communication
Data1:
Illegal
Data2: Not
Data3: Wait
76
COMMAND2
05. Volume Mute
12. OSD Select
APENDIX
DATA
COMMAND1
(Hexadecimal)
][NG][Data][x]
(acknowledgement)
based
on
this for-
abnormal data from non-viable functions
errors.
Code
supported
more
time
function
01.
Power
Data 1
(Command2:a)
Data 0
Data 1
06.
Power On
:
In
like
a
based
manner,
presents
if other functions transmit 'FF' data
this format,
on
Acknowledgement
Volume
To
Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
*
(Volume off)
[k][a][ ][Set ID][ ][Data][Cr]
Power Off
:
on
Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]
To control Power On/Off of the TV.
Transmission
Volume mute
:
adjust
You
data feedback
Control
can
(Command2:f)
volume.
also
volume with the volume buttons
adjust
on
remote control.
status about each function.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
DataMin:0~Max:64
02.
Select
Input
To select
(Command2:b)
input
Transmission
source
Refer to 'Real data
for the TV.
Digital
Data 5:
Data 1:
Analogue
Data 6: RGB-DTV
Component
Data 2: AV1
Data 7: RGB-PC
Data 3: AV2
Data 8: HDMI/DVI
Aspect
To
2
07.
Ratio
button
the
Transmission
can
also
contrast.
contrast in the Picture
adjust
or
in the
using
Special
mapping1'
the ARC
To
menu.
adjust
You
can
screen
also
Transmission
Data Min
:
brightness.
adjust brightness
0
Max
64(*transmit by
:
~
Refer to 'Real data
2: 16:9
3: 14:9
(-10)
(-16)
D: 14:9
~
39: Cinema Zoom
(0)
28: Zoom
(1)
~
17: 14:9
(0)
~
(10)
(16)
(16)
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
*
the PC
Using
screen
input,
aspect
you select either 16:9
or
menu.
mapping1'
as
Hexadecimal
code)
shown below.
Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
38: Zoom
48: Cinema Zoom
in the Picture
[k][h][ ][Set ID][ ][Data][Cr]
1: 4:3
~
shown below.
Brightness (Command2:h)
Date 0: Auto
~
as
Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
[k][c][ ][Set ID][ ][Data][Cr]
18: Zoom
menu.
[k][g][ ][Set ID][ ][Data][Cr]
Refer to 'Real data
08.
format
screen
remote control
on
screen
adjust
DataMin:0~Max:64
format.
screen
adjust
(Command2:g)
Transmission
(Command2:c) (Picture format)
the
also
can
Contrast
To
You
1
Component
adjust
You
shown below.
Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
03.
as
[k][b][ ][Set ID][ ][Data][Cr]
Data 0:
Data 4:
mapping1'
4:3
09. Colour
To
(Command2:i)
adjust
You
can
the
also
Transmission
ratio.
colour.
screen
colour in the Picture
adjust
menu.
APENDIX
[k][i][ ][Set ID][ ][Data][Cr]
DataMin:0~Max:64
04.
Scre
en
Mute
To select
Transmission
Refer to 'Real data
(Command2:d)
screen
mute
mapping1'
as
shown below.
Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]
on/off.
[k][d][ ][Set ID][ ][Data][Cr]
Data 0
:
Screen mute off
(Picture on)
Data 1
:
Screen mute
(Picture off)
on
*Real data
mapping
1
0:Step0
Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]
A:Step10(SETID10)
05. Volume
Mute
(Command2:e)
F:Step15(SETID15)
To control volume mute on/off.
You
also
can
adjust
mute
using
the MUTE button
on
10:Step16(SETID16)
remote control.
Transmission
Data 0
:
[k][e][ ][Set ID][ ][Data][Cr]
Volume mute off
(Volume on)
63:Step99(SETID99)
64
:
Step
Tint: R50
100
G50, Balance: L50
~
R50
~
77
APPENDIX
10. Tint
To
adjust
You
17.
(Command2:j)
can
the
also
Transmission
screen
adjust
tint
(only 60Hz).
tint in the Picture
Sharpnes
[k][j][ ][Set ID][ ][Data][Cr]
To
adjust
You
can
the
mapping1'.
also
Transmission
Data Min: 0
screen
18.
Transmission
(On
Screen
See page 77.
19.
Display)
setting
"OSD
-
also
adjust
code)
adjust
colour temperature in the Picture
[k][u][ ][Set ID][ ][Data][Cr]
1: Cool
2: Warm
3: User
red in color temperature
Transmission
Data Min:0
[k][v][ ][Set ID][ ][Data][Cr]
Max:C8
~
on
*Refer to "Real data
Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]
When
mapping1'.
Hexadecimal
See page 77.
Red Adjustment(Command:v)
To
on/off.
Data 1: OSD
64(*transmit by
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
[k][l][ ][Set ID][ ][Data][Cr]
Data 0: OSD off
*
can
Data 0: Medium
(Command2:l)
To select OSD
Max:
colour temperature.
Transmission
Max: 64
Select
[k][t][ ][Set ID][ ][Data][Cr]
~
menu.
~
mapping1'.
menu.
Temperature (Command2:u)
adjust
You
menu.
Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
12. OSD
Colour
To
in the Picture
balance in the Audio
Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
sharpness.
adjust sharpness
adjust
*Refer to 'Real data
See page 77.
[k][k][ ][Set ID][ ][Data][Cr]
*Refer to 'Real data
also
Data Min: 0
(Command2:k)
s
can
(Command2:t)
balance.
Transmission
Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]
11.
adjust
You
menu.
DataRed:0~Green:64
*Refer to 'Real data
Balance
To
Off ", every OSD doesn't
mapping
2"
as
shown below
Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]
display
on screen.
20. Green
13.
Remote Control
To lock the remote control and the front
on
panel
adjust
green in colour
Transmission
controls
Data Min:0
the set.
Transmission
APENDIX
To
Lock Mode (Command2:m)
Adjustment(Command:w)
Data 0: Lock off
Data 1: Lock
[k][w][ ][Set ID][ ][Data][Cr]
Max:C8
~
*Refer to "Real data
[k][m][ ][Set ID][ ][Data][Cr]
mapping
2"
as
shown below
Acknowledgement [w][ ][Set ID][ ][OK/NG][Data][x]
on
Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
21.
15.Treble
To
(Command2:r)
adjust
You
can
Data Min: 0
adjust
Max:
*Refer to 'Real data
adjust
blue in colour temperature.
Transmission
treble in the Audio
Data Min:0
menu.
64(*transmit by
mapping1'.
Hexadecimal
[k][$][ ][Set ID][ ][Data][Cr]
Max:C8
~
*Refer to "Real data
[k][r][ ][Set ID][ ][Data][Cr]
~
Blue Adjustment(Command:$)
To
treble.
also
Transmission
code)
mapping
*Real data
16.Bas
To
s
adjust
You
0:-20
(Command2:s)
can
5:-19
A:-18
bass.
also
Transmission
Data Min: 0
adjust
bass in the Audio
menu.
5F: -1
[k][s][ ][Set ID][ ][Data][Cr]
Max:
~
*Refer to 'Real data
64(*transmit by
mapping1'.
Hexadecimal
64: 0
code)
69: +1
See page 77.
Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
2"as shown below
Acknowledgement [$][ ][Set ID][ ][OK/NG][Data][x]]
See page 77.
Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
78
temperature.
C3:+19
C8:+20
mapping
2
22.
ISM
Method
To control the ISM method. You
method in
Special
Transmission
27.
(Command2:p)
can
also
adjust
menu.
Transmission
[ j ][p][ ][Set ID][ ][Data][Cr]
Data 0: Normal
Data 1: Orbiter
Data 2: Inversion
Data 3: White Wash
Low
Power
Data
*
also
Low power in
adjust
Transmission
Special
of the set. You
can
To
adjust
on
operation
[m][c][ ][Set ID][ ][Data][Cr]
function,
To select
It's unavailable to
and C4
Select
Input
Data 10
Setting (Command2:r)
orbiter
Transmission
In this
Data 00
Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]
Orbiter Time
code
code: Refer to page 81.
input
Transmission
Data 0: low power off
24.
key
c)
m
use
the IR Code "08
(Power On)".
(Command:
x
b)
source.
menu.
[ j ][q][ ][Set ID][ ][Data][Cr]
1: low power
Key
(Power)"
28.
consumption
(Command:
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
(Command2:q)
To reduce the power
Code
IR
To send IR remote
ISM
Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x]
23.
Send
time term.
:
:
[x][b][ ][Set ID][ ][Data][Cr]
Data 41
:
Component2
Analogue
Data 50
:
RGB-DTV
Digital
Data 20
:
AV1
Data 60
:
RGB-PC
Data 21
:
AV2
Data 90
:
HDMI/DVI
Data 40
:
Component1
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
[ j ][r][ ][Set ID][ ][Data][Cr]
Data Min: 1~Max:
FE(*transmit by
Hexadecimal
code),
Unit: Second
*Refer to 'Real data
mapping1'.
See page 77.
Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
25.
Orbiter Pixel
To
adjust pixel
Transmission
Setting (Command2:s)
number in orbiter function.
[ j ][s][ ][Set ID][ ][Data][Cr]
Data Min: 1~Max: 3
*Refer to 'Real data
mapping1'.
See page 77.
Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
26.
Channel
Tuning (Command:
To tune channel to
Transmission
following
m
a)
APENDIX
programme number
[m][a][ ][Set ID][ ][Data0][ ][Data1]
[ ][Data2][Cr]
Data 0:
High
channel data
Data 1: Low channel data
Data 2: 00:
10:
Analogue
Digital
ex) Analogue
Digital
*
Channel Data
Analogue
Digital
TV Main
Main
TV Main:
TV Main:
ma
ma
0
0
00
00
01
00
0A 10
Range:
TV: 0
TV: 0
~
~
63
3E7
79
APPENDIX
IR CODES
1. How to Connect
Connect your wired remote control to the Remote Control
port
on
the TV.
2. Remote Control IR Codes
waveform
Output
Single pulse,
modulated with 37.917KHz
signal
at 455KHz
Carrier
Tc
FCAR
T1
Configuration
Duty
frequency
=
1/TC
ratio
=
=
fOSC/12
T1/TC
=
1/3
of frame
1st frame
Lead code
Low custom code
High
custom code
Data code
Data code
C0C1C2C3C4C5C6C7C0C1C2C3C4C5C6C7D0D1D2D3D4D5D6D7D0D1D2D3D4D5D6D7
Repeat
frame
Repeat
code
Tf
Lead code
9ms
APENDIX
4.5
Repeat
ms
code
0.55
9ms
Bit
2.25
ms
ms
description
Bit "1"
Bit "0"
0.56
1.12
Frame
0.56
ms
ms
2.24
ms
ms
interval: Tf
The waveform is transmitted
Tf
as
long
as a
key
is
depressed.
Tf
Tf=108ms @455KHz
80
Code
(Hexa)
Function
Code
Note
(Hexa)
50
D/A INPUT
Remote control Button
0B
INPUT
Remote control Button
08
POWER
Remote control Button
79
ARC
Remote control Button
0E
SLEEP
10-19
Number
(Power On/Off)
Remote control Button
Key
0-9
Q.VIEW
Remote control Button
09
MUTE
Remote control Button
02
VOL +
Remote control Button
03
VOL
Remote control Button
00
PR+
Remote control Button
01
PR-
Remote control Button
1E
FAV
Remote control Button
40
D
Remote control Button
41
E
Remote control Button
07
F
Remote control Button
06
G
Remote control Button
44
OK
Remote control Button
43
MENURemote control Button
5B
EXIT
Remote control Button
92
APM
Remote control Button
A9
GUIDE
Remote control Button
20
TEXT
Remote control Button
72
RED
Remote control Button
71
GREEN
Remote control Button
63
YELLOW
Remote control Button
61
BLUE
Remote control Button
53
LIST
Remote control Button
0A
III
Remote control Button
AA
INFO
Remote control Button
E1
Remote control Button
E0
Remote control Button
4D
PSM
TV
Note
Discrete IR Code
(TV Input Selection)
5A
AV1
Discrete IR Code
(AV1 Input Selection)
D0
AV2
Discrete IR Code
BF
COMPONENT1
Discrete IR Code
D4
COMPONENT2
Discrete IR Code
Remote control Button
1A
-
D6
Function
(AV2 Input Selection)
(Component1 Input Selection)
(Component2 Input Selection)
D5
RGB-PC
Discrete IR Code
D7
RGB-DTV
Discrete IR Code
C6
HDMI/DVI
Discrete IR Code
76
Ratio 4:3
Discrete IR Code
(RGB-PC Input Selection)
(RGB-DTV Input Selection)
(HDMI/DVI Input Selection)
(Only
4:3
Mode)
77
Ratio 16:9
Discrete IR Code
AF
Ratio Zoom
Discrete IR Code
(Only
(Only
C4
POWER ON
POWER OFF
Mode)
Zoom
Mode)
Discrete IR Code
(Only
C5
16:9
Power
On)
Discrete IR Code
(Only
Power
Off)
APENDIX
Remote control Button
81
APPENDIX
PROGRAMMING THE REMOTE CONTROL
The remote is
a
multi-brand
or a
universal remote. It
be
can
programmed
to
operate
most remote-control-
lable devices of other manufacturers.
Note that the remote may not control all models of other brands.
Programming a
code into
a
To find out whether your remote
VCR and press the
remote mode
can
corresponding
operate the device without programming,
mode button
on
turn
on
the device such
as a
the remote.
After that, press the POWER button. If the device is turned off then it responds properly and the remote
need not to be programmed. If not, the remote should be programmed to operate the device. The programming procedures are explained below.
Press the MENU and MUTE button
at the
continuously
same
time for 2
seconds, the
current selected
device button will be illuminated.
If you don't press any button for 20 seconds, the
you have to repeat from step 2.
light
on
the mode button will be turned off. In that
Enter code numbers
pages. When
successful.
using the number button on the remote by referring
pressing the button, the light blinks at a time. If the device
Press the MENU button to store the code. After
APENDIX
82
Test the remote functions to
see
if the device
blinking twice,
the code table
turned off, the
on
following
programming
this code is stored.
responds properly.
the
If not, repeat from step 2.
case,
is
PROGRAMMING CODES
VCRs
Brand
Codes
AIWA
034
AKAI
016
043
125
146
046
Brand
Codes
MAGNAVOX
031
033
067
068
012
031
124
MARANTZ
034
033
041
Brand
Codes
SAMSUNG
032
040
102
104
105
107
109
112
113
115
120
122
067
125
069
AMPRO
072
ANAM
031
033
103
AUDIO DYNAMICS
012
023
039
043
MARTA
101
MATSUI
027
030
BROKSONIC
035
037
129
MEI
031
033
CANON
028
031
033
MEMOREX
003
010
014
031
CAPEHART
108
033
034
053
072
CRAIG
003
040
135
139
CURTIS MATHES
031
033
041
DAEWOO
005
007
010
065
108
112
116
101
102
134
MGA
045
046
059
064
MINOLTA
013
020
110
111
MITSUBISHI
013
020
045
046
117
119
049
051
059
061
022
043
048
135
SANYO
003
007
010
014
102
134
SCOTT
017
037
112
129
003
008
009
010
013
014
017
020
031
042
073
081
054
149
131
SEARS
101
SHARP
031
SHINTOM
024
SONY
003
009
031
052
056
057
058
076
077
078
149
033
034
DAYTRON
108
DBX
012
023
DYNATECH
034
053
ELECTROHOME
059
EMERSON
006
017
025
027
048
SOUNDESIGN
034
029
031
034
035
NORDMENDE
043
STS
013
036
037
046
101
OPTONICA
053
054
SYLVANIA
031
129
131
138
153
PANASONIC
066
070
074
FISHER
003
008
009
010
133
140
145
FUNAI
034
GE
031
033
063
072
107
109
144
147
132
136
GO VIDEO
039
043
012
045
004
018
026
034
137
150
HARMAN KARDON
HITACHI
151
SANSUI
MTC
034
040
MULTITECH
024
034
NEC
012
023
PENTAX
013
020
039
031
043
033
063
PHILCO
031
034
067
PHILIPS
031
033
034
067
071
101
021
048
054
SYMPHONIC
034
TANDY
010
034
TATUNG
039
043
TEAC
034
039
043
TECHNICS
031
033
070
TEKNIKA
019
031
033
034
101
THOMAS
034
TMK
006
TOSHIBA
008
013
042
047
059
082
112
131
TOTEVISION
040
101
145
UNITECH
040
034
VECTOR RESEARCH 012
043
063
PILOT
101
INSTANTREPLAY
031
033
PIONEER
013
JCL
031
033
PORTLAND
108
JCPENNY
012
013
015
PULSAR
072
040
066
101
QUARTZ
011
014
QUASAR
033
066
075
RCA
013
020
033
040
041
062
063
VICTOR
048
107
109
140
144
VIDEO CONCEPTS
012
145
147
VIDEOSONIC
040
WARDS
033
JENSEN
043
JVC
012
031
033
043
048
050
055
060
130
150
152
014
034
039
043
047
048
003
008
010
014
001
012
013
020
031
033
034
040
101
106
114
123
053
054
101
KENWOOD
LG
(GOLDSTAR)
REALISTIC
034
0 46
003
013
017
024
031
033
034
040
053
054
131
LLOYD
034
RICO
058
YAMAHA
012
034
039
LXI
003
009
013
014
RUNCO
148
ZENITH
034
048
056
017
034
101
106
SALORA
014
058
072
080
MAGIN
059
067
083
APENDIX
043
101
040
83
APPENDIX
VCRs
Brand
ABC
Codes
003
004 039
046
052
Brand
Codes
LG
001
074
042
053
(GOLDSTAR)
106
101
005
Brand
Codes
REMBRANT
025
SAMSUNG
102
AJIN
112
M-NET
037
SCIENTIFIC ATLANTA 003
ANTRONIK
014
MACOM
033
043
ARCHER
005
MAGNAVOX
010
CABLE STAR
026
MEMOREX
100
CENTURION
092
MOVIE TIME
028
032
CENTURY
007
NSC
015
028
CITIZEN
007
COLOUR VOICE
065
090
OAK
016
031
COMBANO
080
081
PANASONIC
044
047
COMTRONICS
019
030
PARAGON
100
DIAMOND
023
EAGLE
020
030
040
EASTERN
057
062
066
007
014
024
012
064
038
079
071
073
ELECTRICORD
032
GE
072
GEMINI
008
022
GI
052
074
PHILIPS
PIONEER
037
006
012
013
065
085
090
034
051
052
053
020
063
076
025
054
GOLDEN CHANNEL 030
POST NEWS WEEK016
PRUCER
059
PTS
011
048
073
074
055
071
072
107
030
068
011
041
042
045
046
SHERITECH
022
SIGNAL
030
SIGNATURE
052
SL MARX
030
SPRUCER
047
078
STARCOM
002
004 008
STARGATE
008
030
TADIRAN
030
TAEKWANG
110
TAIHAN
105
TANDY
017
TEXSCAN
029
TOCOM
039
TOSHIBA
100
UNIKA
UNITED CABLE
UNIVERSAL
040
056
007
014
024
004
053
005
007
014
024
026
027
032
035
012
015
018
086
087
088
089
114
060
HAMLIN
049
050
HITACHI
052
055
PULSAR
100
HOSPITALITY
070
077
RCA
047
JERROLD
002
003
004
008
REGAL
049
009
010
052
069
REGENCY
057
ZENITH
100
Codes
Brand
Codes
Brand
Codes
APEX DIGITAL
022
MITSUBISHI
002
RCA
005
006
DENON
020
014
NAD
023
SAMSUNG
011
015
GE
005
006
ONKYO
008
017
SONY
007
027
PANASONIC
003
009
THOMPSON
005
006
PHILIPS
013
TOSHIBA
019
008
PIONEER
004
YAMAHA
009
018
ZENITH
010
016
VIEWSTAR
050
APENDIX
DVD
Brand
HARMAN KARDON
84
JVC
012
LG
001
MAGNAVOX
013
PROCEED
021
MARANTZ
024
PROSCAN
005
010
016
025
026
006
009
025
093
TROUBLESHOOTING CHECKLIST
The
operation
does not work
normally.
Check to
causing
The remote control
Ensure that the batteries
doesn't work
Power is
if there is any object between the product and the remote control
obstruction. Ensure you are pointing the remote control directly at the TV.
see
suddenly
Install
new
Is the
sleep
does
work
on
&No sound
another channel. The
Picture appears
or
slowly
switching
on
poor color
or
poor
is turned
problem
interrupted
on.
may be with the broadcast.
Is the power cord inserted into wall power outlet?
picture
product's
This is normal, the
outlet, plug another product's power cord into the outlet
power cord
image
was
is muted
contact your service center, if the
Adjust
Color in
Keep
sufficient distance between the
Try
a
menu
Horizontal/vertical bars
in.
plugged
during
picture
the
product startup process. Please
appeared after five minutes.
has not
option.
another channel. The
problem
Are the video cables installed
product
and the VCR.
APENDIX
may be with the broadcast.
properly?
Activate any function to restore the
or
-).
Check your antenna direction and/or location.
where the
No
Power
settings.
product
Test the wall power
after
to
mode is set: TV, VCR etc.
normally.
Try
picture
-
station tuned with Auto off activated.
Check whether the
No
to +,
timer set?
Check the power control
not
operating
polarity (+
batteries.
No broadcast
operation
installed with correct
Ensure that the correct remote
turned off
The
are
Check for local interference such
brightness
as an
of the
electrical
picture.
appliance
or
power tool.
picture shaking
Poor
reception
some
Lines
in
on
cable
Station
or
Station
signal
product experiencing problems,
tune to another station.
channels
or
streaks
pictures
Check for
is
weak, reorient
sources
Check antenna
of
possible
(Change
antenna to receive weaker station.
interference.
the direction of the
antenna).
85
APPENDIX
The audio function does
not
work.
Press the VOL
VOLUME button.
or
Sound muted? Press MUTE button.
Picture OK & No sound
Try
another channel. The
problem
Are the audio cables installed
No
output from
of the
one
speakers
Unusual sound from
There is
The
signal
problem
APENDIX
stripe
background
Incorrect
product
option.
humidity
is turned
PC mode
Adjust resolution,
Check the
or
in ambient
(Only
&
Screen color is unstable
color
temperature
may result in
off and does not indicate
an
a
unusual noise
fault with the
input
applied)
horizontal
frequency,
or
vertical
frequency.
source.
Work the Auto
configure
or
position
single
or
on or
on
Horizontal Noise &
or
86
in PC mode.
is out of range
Vertical bar
change
menu
properly?
product.
product
a
A
Balance in
when the
inside
the
Adjust
may be with the broadcast.
Check the
signal
cable.
Reinstall the PC video card.
adjust clock, phase,
or
H/V position.
(Option)
PRODUCT SPECIFICATIONS
50PC3D
MODELS
(50PC3D-AA)
Including
51.3
stand
Dimensions
(Width
x
Height
Excluding
Depth)
x
Weight
Power
mm
4.2 inches
x
810.0
107.7
x
mm
stand
114.4
pounds /
51.9
kg
excluding
stand
95.0
pounds /
43.1
kg
50/60Hz
AC100-240V
PAL
System
VHF
Program Coverage
External Antenna
x
355.8
x
including
requirement
Television
31.9
x
1302.6
14.0 inches
x
872.0
x
51.3
stand
34.3
x
1302.6
~
B/G,
DVB-T
0-12, UHF 20-75, CATV 02-44, DTV 06-12, 27-69
75 ohm
Impedance
32
Operating Temperature
~
104°F
(0
40°C)
~
Less than 80%
Operating Humidity
Environment condition
-4
Storage Temperature
specifications
shown above may be
changed
140°F
(-20
~
60°C)
Less than 85%
Storage Humidity
The
~
without
prior
notice for
quality improvement.
APENDIX
87
Download PDF

advertising