LG | 50PG79ED | LG 50PG79ED Owner’s Manual

PLASMA TV
OWNER’S MANUAL
PLASMA TV MODELS
5 0 P G 7* * *
Please read this manual carefully before
operating your TV.
Retain it for future reference.
Record model number and serial number of
the TV.
Refer to the label on the back cover and
quote this information.
To your dealer when requiring service.
DVB is a registered trademark
of the DVB Project
I D N u m b e r : 5513: 50PG79ED
Manufactured under license from Dolby
Laboratories. ‘Dolby’ and the ‘double-D’
symbol are trademarks of Dolby
Laboratories.
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the
dealer where you purchased the product.
ACCESSORIES
A
Image shown may differ from your TV.
INPUT
D/A
POWER
MODE
TV
INPUT
VCR
BRIGHT
DVD
SIMPLINK
PIP
PIP PR-
TEXT INFO i GUIDE
PIP PR+
SWAP
MENU
PIP INPUT
LIVE
EXIT
MARK
OK
TIME
SHIFT
i
TIME
SHIFT
Q.VIEW
VOL
PR
PAGE
MUTE
1
2
3
4
5
6
7
8
9
LIST
0
FAV
SIZE
INDEX
TIME
?
Owner’s Manual
Batteries
Cable management clip
REVEAL
I/II
SLEEP
SUBTITLE
USB
RATIO
Remote Control
Power Cord
Protection Cover
Ferrite Core
This feature is not available for all models.
* Lightly wipe any stains or fingerprints on the
surface of the TV with the polishing cloth.
Polishing Cloth
Polishing cloth for use on
the screen.
Do not use excessive force. This may cause
scratching or discolouration.
Use of Ferrite Core
Ferrite core can be used to reduce the electromagnetic
wave when connecting the power cord.
The closer the location of the ferrite core to the power
plug, the better it is.
Install as close as possible to
the power plug.
1
CONTENTS
ACCESSORIES
...........................................
1
PREPARATION
CONTENTS
Home Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . 5
Back Panel Information . . . . . . . . . . . . . . . . . . . . 6
Back Cover for Wire Arrangement . . . . . . . . . . . . 7
Desktop Pedestal Installation . . . . . . . . . . . . . . . . 8
Swivel Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Wall Mount: Horizontal Installation . . . . . . . . . . . .9
Not Using the Desk-type Stand . . . . . . . . . . . . . . . . .9
Please Set it up Carefully so the Product does not
Fall Over. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Antenna Connection . . . . . . . . . . . . . . . . . . . . . . 11
Input Source Selection . . . . . . . . . . . . . . . . . . . . 44
SIMPLINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
DVR (DIGITAL VIDEO RECORDER)
Timeshift Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Manual Recording . . . . . . . . . . . . . . . . . . . . . . . . 54
Recorded TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Scheduled List . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
HDD Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Record Quality . . . . . . . . . . . . . . . . . . . . . . . . . . 61
To Use the USB Device . . . . . . . . . . . . . . . . . . . 62
Photo List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Music List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Digital Audio Output Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Other A/V Source Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
USB In Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
- Screen Setup for PC Mode . . . . . . . . . . . . . . . . . . . . . . . . . 24
WATCHING TV / PROGRAMME CONTROL
Remote Control Key Functions . . . . . . . . . . . . . .26
Turning on the TV . . . . . . . . . . . . . . . . . . . . . . . . 28
Initializing Setup . . . . . . . . . . . . . . . . . . . . . . . . . 28
Programme Selection . . . . . . . . . . . . . . . . . . . . . 29
Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . 29
On-Screen Menus Selection and Adjustment . . 30
Factory Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Model Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Auto Programme Tuning . . . . . . . . . . . . . . . . . . .33
Manual Programme Tuning . . . . . . . . . . . . . . . . . 35
Fine Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Assigning a Station Name . . . . . . . . . . . . . . . . . 38
Booster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Programme Edit . . . . . . . . . . . . . . . . . . . . . . . . . .40
Input List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Calling Up the Channel List . . . . . . . . . . . . . . . . 43
2
EPG(ELECTRONIC PROGRAMME GUIDE)
Switch on/off EPG . . . . . . . . . . . . . . . . . . . . . . . 70
Select a programme . . . . . . . . . . . . . . . . . . . . . . 70
Button Function in NOW/NEXT Guide Mode . 71
Button Function in Extended Description Box . 71
Button Function in 7 Days Guide Mode . . . . . . 72
PICTURE CONTROL
Watching PIP(Picture-In-Picture) . . . . . . . . . . . .73
Picture Size (Aspect Ratio) Control . . . . . . . . . .76
Preset Picture Settings
- Picture Mode - Preset . . . . . . . . . . . . . . . . 77
- Auto Colour Tone Control
(Warm/Medium/Cool) . . . . . . . . . . . . . . . .78
Manual Picture Adjustment
- Picture Mode - User Option . . . . . . . . . . . 79
- Colour Temperature - User Option. . . . . .80
Brightness Adjustment . . . . . . . . . . . . . . . . . . . . . . 81
XD - Picture Improvement Technology . . . . . . . . . . . 82
Advanced - Cinema . . . . . . . . . . . . . . . . . . . . . . . 83
Advanced - Black( Darkness) Level . . . . . . . . . . 84
Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Image Sticking Minimization(ISM)Method . . . . . . . .86
Low-Power Picture Mode . . . . . . . . . . . . . . . . . . . . 87
SOUND & LANGUAGE CONTROL
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . .108
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
Product Specifications . . . . . . . . . . . . . . . . . . . . 111
Programming the Remote Control
. . . . . . . . . 112
IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
CONTENTS
Auto Volume Leveller ( Auto Volume) . . . . . . . . 88
Preset Sound Settings- Sound Mode . . . . . . . . 89
Sound Setting Adjustment - User Mode . . . . . . . . 90
Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92
TV Speakers On/ Off Setup . . . . . . . . . . . . . . . . 93
I/II
- Stereo/Dual Reception . . . . . . . . . . . . . . . . . 94
- Speaker Sound Output Selection . . . . . . . . 94
Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
APPENDIX
External Control Through RS-232C . . . . . . . . . 117
Open Source License . . . . . . . . . . . . . . . . . . . . 123
TIME SETTING
Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Auto On/ Off Timer Setting . . . . . . . . . . . . . . . .98
Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . .99
Auto Sleep Setting . . . . . . . . . . . . . . . . . . . . . . .100
PARENTAL CONTROL / RATINGS
Set Password & Lock System . . . . . . . . . . . . . . 101
Programme Blocking . . . . . . . . . . . . . . . . . . . . . 103
Parental Guidance . . . . . . . . . . . . . . . . . . . . . . . 104
External Input Blocking . . . . . . . . . . . . . . . . . . . 105
TELETEXT
Switch On/Off . . . . . . . . . . . . . . . . . . . . . . . . . 106
Simple Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
TOP Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Fastext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Special Teletext Functions . . . . . . . . . . . . . . . . 107
After reading this manual, keep it handy for future reference.
3
PREPARATION
HOME MENU
This menu is a contents guide.
PREPARATION
In Home Menu, you enter the Recorded TV and the Guide of X-STUDIO, the X-STUDIO recording schedule,
Manual Recording, Photo List, Music List
INPUT
D/A
POWER
MODE
TV
INPUT
VCR
BRIGHT
DVD
SIMPLINK
PIP
PIP PR-
TEXT INFO i GUIDE
PIP PR+
SWAP
PIP INPUT
Recorded TV G p.55
Schedule G p.59
Manual Rec G p.54
MENU
LIVE
EXIT
MARK
Guide G p.70
Photo List G p.63
OK
TIME
SHIFT
TIME
SHIFT
Q.VIEW
VOL
PR
MUTE
4
PAGE
Music List G p.67
FRONT PANEL CONTROLS
■
■
Image shown may differ from your TV
If your TV has a protection film attached, remove the film and then wipe the product with a polishing cloth.
PREPARATION
Remote Control Sensor
POWER Button
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates green when the TV is
switched on.
MENU
INPUT
INPUT
MENU
INPUT
VOL
OK
P
OK
MENU
INPUT
PR
OK
MENU
OK
P
VOLUME
PROGRAMME
5
PREPARATION
BACK PANEL INFORMATION
■
Image shown may be somewhat different from your TV.
PREPARATION
3
USB Input
HDMI Input
Connect a HDMI signal
to HDMI IN.
AV IN 1
S-VIDEO
S-Video Input
Connect S-Video out
from an S-VIDEO device.
VIDEO
L/MONO AUDIO
1
R
Audio/Video Input
Connect audio/video
output from an external
device to these jacks.
AV IN 1
S-VIDEO
2
VIDEO
L/MONO AUDIO
2
3
4
5
9
R
2
AV
V IN 1
S-VIDEO
VIDEO
MONO AUDIO
L/MONO
L/
R
6
1
2
6
7
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
HDMI Input
Connect a HDMI signal to HDMI IN.
Or DVI(VIDEO)signal to HDMI/DVI port with DVI
to HDMI cable.
8
5
Component Input
Connect a component video/audio device to
these jacks.
6
RGB Input
Connect the output from a PC.
7
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
3
RGB/DVI Audio Input
Connect the audio from a PC.
8
Audio/Video Input (AV IN 1)
Connect audio/video output from an external
device to these jacks.
4
OPTICAL DIGITAL AUDIO OUT
Connect digital audio from various types of equipment.
Note: In standby mode, these ports do not work.
9
Antenna Input
Connect RF antenna to this jack.
2
BACK COVER FOR WIRE ARRANGEMENT
■
Image shown may be somewhat different from your TV.
Connect the cables as necessary.
PREPARATION
1
To connect additional equipment, see the
E X T E R N A L E Q U I P M E N T S E T U P section.
2
Install the C A B L E M A N A G E M E N T C L I P as shown.
CABLE MANAGEMENT CLIP
How to remove the cable management clip
Hold the C A B L E M A N A G E M E N T C L I P with both hands and pull it upward.
Separate CABLE MANAGEMENT from TV by
pressing two latches.
7
PREPARATION
A
A
The TV can be installed in various ways such as on a wall, or on a desktop etc.
The TV is designed to be mounted horizontally.
EARTHING
PREPARATION
Ensure that you connect the earth wire to prevent possible
electric shock. If grounding methods are not possible, have
a qualified electrician install a separate circuit breaker.
Do not try to earth the TV by connecting it to telephone
wires, lightening rods or gas pipes.
Power Supply
Circuit breaker
DESKTOP PEDESTAL INSTALLATION
For adequate ventilation allow a clearance of 4” (10cm) all around the TV.
4 inches
4 inches
4 inches
INPUT
MENU
OK
4 inches
P
SWIVEL STAND
After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit
your viewing position.
8
WALL MOUNT: HORIZONTAL INSTALLATION
For adequate ventilation allow a clearance of 4” (10cm) all around the TV. We recommend that you use a
wall mounting bracket of LG brand when mounting the TV to a wall.
4 inches
4 inches
4 inches
PREPARATION
4 inches
4 inches
NOT USING THE DESK-TYPE STAND
■
Image shown may differ from your TV.
When installing the wall-mounted unit, use the
protection cover for desk-type stand installation.
Insert the PROTECTION COVER into the TV until
clicking sound.
9
PREPARATION
PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOES
NOT FALL OVER.
You should purchase necessary components to fix the TV to the wall.
Position the TV close to the wall to avoid the possibility of it falling when pushed.
A The instructions shown below are a safer way to set up the TV, which is to fix it to the wall, avoiding the
possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury.
This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.
A
A
PREPARATION
1
2
1
Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen then bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
2
Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the
wall.
3
3
Use a sturdy rope to tie the product. It is safer to tie the rope so it is horizontal between the wall
and the product.
! NOTE
G
G
G
10
When moving the TV undo the cords first.
Use a platform or cabinet strong and large enough to support the size and weight of the TV.
To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.
■
To prevent damage do not connect to the mains outlet until all connections are made between the devices.
ANTENNA CONNECTION
For optimum picture quality, adjust antenna direction.
■ An antenna cable and converter are not supplied.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
AV IN 1
VIDEO
L
AUDIO
AUDIO
R
R
S-VIDEO
VIDEO
RF Coaxial Wire (75 ohm)
2
L/MONO AUDIO
Outdoor
Antenna
(VHF, UHF)
AV OUT
L/MONO
AV IN 1
VIDEO
Wall
Antenna
Socket
PREPARATION
■
R
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
UHF
Antenna
Signal
Amplifier
S-VIDEO
VHF
AV IN 1
VIDEO
■
In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the
antenna as shown above.
If signal needs to be split for two TVs, use an antenna signal splitter for connection.
L/MONO AUDIO
■
R
2
11
EXTERNAL EQUIPMENT SETUP
■
To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.
■
Image shown may differ from your TV.
HD RECEIVER SETUP
■
This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive
Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.
1
Connect the video outputs (Y, PB, PR) of the digital set
top box to the C O M P O N E N T I N V I D E O jacks on the
TV.
3
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
1
2
L/MONO AUDIO
Connect the audio output of the digital set-top box to
the C O M P O N E N T I N A U D I O jacks on the TV.
VIDEO
2
AV IN 1
S-VIDEO
EXTERNAL EQUIPMENT SETUP
Connecting with a component cables
R
4
Select C o m p o n e n t 1 input source using the I N P U T
button on the remote control.
If connected to C O M P O N E N T I N 2 input, select
C o m p o n e n t 2 input source.
480i
Yes
No
480p
Yes
Yes
576i
Yes
No
576p
Yes
Yes
720p
Yes
Yes
1080i
Yes
Yes
1080p
Yes
Yes
AV IN 1
L/MONO AUDIO
HDMI 1/2/3
VIDEO
Component 1/2
S-VIDEO
Signal
R
12
Connecting a set-top box with an HDMI cable
Select H D M I 1, H D M I 2 or H D M I 3 input source using
the I N P U T button on the remote control.
! NOTE
G
If the digital set-top box supports Auto HDMI function, the
output resolution of the source device will be automatically
set to 1280x720p.
G
If the digital set-top box player does not support Auto
HDMI, you need to set the output resolution appropriately.
To get the best picture quality, adjust the output resolution
of the source device to 1920x1080i/1080p.
1
Connecting with an HDMI to DVI cable
1
Connect the digital set-top box to H D M I / D V I I N 1
jack on the TV.
AV IN 1
S-VIDEO
AV IN 1
3
Turn on the digital set-top box. (Refer to the owner’s
manual for the digital set-top box.)
4
Select H D M I 1 input source using the I N P U T button
on the remote control.
R
L/MONO AUDIO
L/MONO AUDIO
VIDEO
Connect the audio output of the digital set-top box to
the A U D I O I N ( R G B / D V I ) jack on the TV.
VIDEO
S-VIDEO
2
R
1
2
AV IN 1
S-VIDEO
VIDEO
L/MONO AUDIO
13
R
3
L/MONO AUDIO
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
VIDEO
2
AV IN 1
S-VIDEO
Connect the digital set-top box to H D M I / D V I I N 1,
H D M I I N 2 or H D M I I N 3 jack on the TV.
EXTERNAL EQUIPMENT SETUP
1
R
EXTERNAL EQUIPMENT SETUP
DVD SETUP
Connecting with a component cables
Connect the video outputs (Y, PB, PR) of the DVD to the
C O M P O N E N T I N V I D E O jacks on the TV.
2
Connect the audio outputs of the DVD to the
C O M P O N E N T I N A U D I O jacks on the TV.
AV IN 1
S-VIDEO
1
VIDEO
Turn on the DVD player, insert a DVD.
4
Select C o m p o n e n t 1 input source using the I N P U T
button on the remote control.
If connected to C O M P O N E N T I N 2 input, select
C o m p o n e n t 2 input source.
5
Refer to the DVD player's manual for operating
instructions.
2
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV
Video output ports
on DVD player
14
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
R
3
L/MONO AUDIO
EXTERNAL EQUIPMENT SETUP
1
Connecting with a S-Video cable
1
Connect the S-VIDEO output of the DVD to the S V I D E O input on the TV.
AV
V IN 1
S-VIDEO
1
4
Select A V 1 input source using the I N P U T button on
the remote control.
If connected to A V I N 2 input, select A V 2 input
source.
5
Refer to the DVD player's manual for operating
instructions.
2
VIDEO
S-VIDEO
L
ANT IN
R
OUTPUT
SWITCH
EXTERNAL EQUIPMENT SETUP
Turn on the DVD player, insert a DVD.
R
3
MONO AUDIO
L/MONO
L/
Connect the audio outputs of the DVD to the A U D I O
input jacks on the TV.
VIDEO
2
ANT OUT
2
Connecting the HDMI cable
AV IN 1
S-VIDEO
Connect the HDMI output of the DVD to the
H D M I / D V I I N 1, H D M I I N 2 or H D M I I N 3 jack on
the TV.
2
Select H D M I 1, H D M I 2 or H D M I 3 input source using
the I N P U T button on the remote control.
3
Refer to the DVD player's manual for operating
instructions.
VIDEO
1
L/MONO AUDIO
R
1
! NOTE
G The
TV can receive video and audio signals simultaneously
when using a HDMI cable.
G If the DVD does not support Auto HDMI, you must set the
output resolution appropriately.
15
EXTERNAL EQUIPMENT SETUP
VCR SETUP
To avoid picture noise (interference), allow adequate distance between the VCR and TV.
■ Typically a frozen still picture from a VCR. If 4:3 picture format is used for an extended period the fixed
images on the sides of the screen may remain visible.
■
AV IN 1
ANT OUT
S-VIDEO
ANT IN
OUTPUT
SWITCH
VIDEO
L
R
1
S-VIDEO
VIDEO
MONO AUDIO
L/MONO
L/
Wall Jack
R
EXTERNAL EQUIPMENT SETUP
Connecting with a RF Cable
2
Antenna
1
Connect the A N T O U T socket of the VCR to the A N T E N N A I N socket on the TV.
2
Connect the antenna cable to the A N T I N socket of the VCR.
3
Press the P L A Y button on the VCR and match the appropriate channel between the TV and VCR for
viewing.
AV IN 1
S-VIDEO
VIDEO
L/MONO AUDIO
R
16
Connecting with an RCA cable
1
S-VIDEO
If you have a mono VCR, connect the audio cable from the
VCR to the A U D I O L / M O N O jack of the TV.
L
VIDEO
R
OUTPUT
SWITCH
ANT IN
ANT OUT
EXTERNAL EQUIPMENT SETUP
R
G
L/MONO AUDIO
! NOTE
VIDEO
Select A V 1 input source using the I N P U T button on
the remote control.
If connected to A V I N 2 input, select A V 2 input
source.
S-VIDEO
3
R
Insert a video tape into the VCR and press PLAY on
the VCR. (Refer to the VCR owner’s manual.)
MONO AUDIO
L/MONO
L/
2
AV
V IN 1 AV IN 1
VIDEO
V I D E O jacks between TV and
Connect the A U D I O/V
VCR. Match the jack colours (Video = yellow, Audio Left
= white, and Audio Right = red)
S-VIDEO
1
Connecting with a S-Video cable
Connect the S-VIDEO output of the VCR to the S V I D E O input on the TV set. The picture quality is
improved; compared to normal composite (RCA cable)
input.
1
AV
V IN 1
VIDEO
MONO AUDIO
L/MONO
L/
Connect the audio outputs of the VCR to the A U D I O
input jacks on the TV.
2
S-VIDEO
1
2
R
3
Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
4
Select A V 1 input source using the I N P U T button on
the remote control.
If connected to A V I N 2 input, select A V 2 input
source.
! NOTE
G
VIDEO
S-VIDEO
OUTPUT
SWITCH
L
R
ANT IN
ANT OUT
If both S-VIDEO and VIDEO sockets have been connected to
the S-VHS VCR simultaneously, only the S-VIDEO can be
received.
17
EXTERNAL EQUIPMENT SETUP
DIGITAL AUDIO OUT SETUP
Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port.
Connect one end of an optical cable to the TV Digital
Audio (Optical) Output port.
1
AV
V IN 1
Connect the other end of the optical cable to the
digital audio (optical) input on the audio equipment.
MONO AUDIO
L/MONO
L/
Set the “TV Speaker option - Off ” in the AUDIO
menu.(Gp .93). Refer to the external audio equipment
instruction manual for operation.
3
VIDEO
1
R
! NOTE
G
When connecting with external audio equipments, such as
amplifiers or speakers, please turn the TV speakers off.
CAUTION
G Do
not look into the optical output port. Looking at the
laser beam may damage your vision.
18
S-VIDEO
EXTERNAL EQUIPMENT SETUP
2
2
OTHER A/V SOURCE SETUP
Camcorder
Video Game Set
R
3
L
EXTERNAL EQUIPMENT SETUP
VIDEO
1
2
1
V I D E O jacks between TV and external equipment. Match the jack colours .
Connect the A U D I O/V
(Video = yellow, Audio Left = white, and Audio Right = red)
2
Select A V 2 input source with using the I N P U T button on the remote control.
If connected to A V I N 1 input, select A V 1 input source.
3
Operate the corresponding external equipment.
Refer to external equipment operating guide.
19
EXTERNAL EQUIPMENT SETUP
USB IN SETUP
3
EXTERNAL EQUIPMENT SETUP
1
1
Connect the USB device to the U S B I N jacks on the side of TV.
2
After connecting the U S B I N jacks, you use the U S B function. (G p .62)
2
20
PC SETUP
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
Connecting with a D-sub 15 pin cable
EXTERNAL EQUIPMENT SETUP
Connect the RGB output of the PC to the R G B I N
( P C ) jack on the TV.
1
Connect the PC audio output to the A U D I O I N
( R G B / D V I ) jack on the TV.
2
2
AUDIO
1
R
Select R G B - P C input source using the INPUT button
on the remote control.
L/MONO AUDIO
4
VIDEO
Turn on the PC and the TV
AV IN 1
S-VIDEO
3
AV IN
RGB OUTPUT
Connecting with a HDMI to DVI cable
3
Turn on the PC and the TV.
4
Select HDMI1 input source using the INPUT button
on the remote control.
VIDEO
L/MONO AUDIO
R
L/MONO AUDIO
Connect the PC audio output to the A U D I O I N
( R G B / D V I ) jack on the TV.
VIDEO
2
AV IN 1 AV IN 1
S-VIDEO
Connect the DVI output of the PC to the H D M I / D V I
I N 1 jack on the TV.
S-VIDEO
1
R
1
2
DVI-PC OUTPUT
AUDIO
! NOTE
G
If the PC has a DVI output and no HDMI output, a separate audio
connection is necessary.
G
If the PC does not support Auto DVI, you need to set the output
resolution appropriately. To get the best picture quality, adjust the
PC graphics card's output resolution to 1920x1080, 60Hz.
21
EXTERNAL EQUIPMENT SETUP
HDMI/DVI-DTV mode
RGB-PC, HDMI/DVI-PC mode
EXTERNAL EQUIPMENT SETUP
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
640x480
31.469
37.500
720x400
31.469
800x600
37.879
46.875
60.317
75.000
48.363
56.476
60.023
60.004
70.069
75.029
1280x768
47.776
59.870
1360x768
47.712
60.015
1366x768
47.13
59.65
1280x1024
63.981
79.976
60.020
75.025
1600x1200
75.000
60.000
1920x1080
67.500
60.000
1024x768
Resolution
Horizontal
Frequency(kHz)
59.940
75.000
720x480
31.47/31.50
59.94/60.00
720x576
31.25
50.00
70.08
1280x720
37.50
50.00
44.96/45.00
59.94/60.00
1920x1080
Vertical
Frequency(Hz)
28.125
50.00
26.97/27.00
23.976/24.00
33.716/33.750
29.97/30.00
33.72/33.75
59.94/60.0
56.25
50.00
67.43/67.50
59.94/60.00
! NOTES
Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use.
G Avoid keeping a fixed image on the screen for a long period of time. The fixed image may become
permanently imprinted on the screen.
G The synchronization input form for Horizontal and Vertical frequencies is separate.
G
22
! NOTE
G Avoid
G If
using a sound card, adjust PC sound as required.
TV uses a VESA Plug and Play Solution. The
TV provides EDID data to the PC system with a
DDC protocol. The PC adjusts automatically when
using this TV.
G DDC protocol is preset for RGB (Analogue RGB),
HDMI (Digital RGB) mode.
G If required, adjust the settings for Plug and Play
functionality
G If the graphic card on the PC does not output analogue and digital RGB simultaneously, connect only
one of either RGB or HDMI IN (or HDMI/DVI IN)
to display the PC output on the TV.
G If graphic card on the PC does output analogue
and digital RGB simultaneously, set the TV to either
RGB or HDMI; (the other mode is set to Plug and
Play automatically by the TV.)
G DOS mode may not work depending on the video
card if you use a HDMI to DVI cable.
G If you use too long an RGB-PC cable, there may be
interference on the screen. We recommend using
under 5m of cable. This provides the best picture
quality.
G This
EXTERNAL EQUIPMENT SETUP
keeping a fixed image on the set’s screen for
prolonged periods of time. The fixed image may
become permanently imprinted on the screen; use
a screen saver when possible.
G Connect the PC to the RGB IN (PC) or HDMI IN
(or HDMI/DVI IN) port of the TV; change the resolution.
G There may be interference relating to resolution,
vertical pattern, contrast or brightness in PC mode.
Change the PC mode to another resolution or
change the refresh rate to another rate or adjust
the brightness and contrast on the menu until the
picture is clear.
If the refresh rate of the PC graphic card can not be
changed, change the PC graphic card or consult
the manufacturer of the PC graphic card.
G The synchronization input waveform for Horizontal
and Vertical frequencies are separate.
G Connect the signal cable from the monitor output
port of the PC to the RGB IN (PC) port of the TV or
the signal cable from the HDMI output port of the
PC to the HDMI IN (or HDMI/DVI IN) port on the
TV.
G Connect the audio cable from the PC to the Audio
input on the TV. (Audio cables are not included
with the TV).
23
EXTERNAL EQUIPMENT SETUP
Screen Setup for PC mode
Overview
When the RGB input, of the set is connected to a PC Output, Select
RGB-PC with using the INPUT button on the remote control.
EXTERNAL EQUIPMENT SETUP
When you change the resolution, select the proper resolution in
present input to see the best picture appearance.
Picture Mode
: User1
Colour Temperature
1
Press the M E N U button and then use D or E button
to select the PICTURE menu.
: Cool
XD
Advanced
Aspect Ratio
: 16:9
Picture Reset
Screen
2
Press the G button and then use D or E button to
select Screen.
3
Press the G button to enter the screen adjustment
menu.
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
24
G
Selection ( G or ) leads you to
the screen adjustment menu.
Adjustment for screen Resolution, Position, Clock, Phase, Reset
1
Use D or E button to select R e s o l u t i o n, Position, Clock,
or Phase.
Resolution
Position G
Clock
Phase
3
Press the O K button and then use D or E or F or G
button to make appropriate adjustments.
■ The P h a s e adjustment range is -16 ~ +16.
■ The C l o c k adjustment range is -30 ~ +30.
Press the O K button.
Initializing (Reset to original factory values)
To initialize the adjusted values.
This function allows you to return to the good picture reproduction programmed at the factory and cannot be change.
1
Use D or E button to select Reset.
Reset
Move
Prev
Resolution XGA, WXGA(1024(XGA), 1280,
1360, 1366(WXGA))
isn’t distinguished because of
having the same H/V Sync Time.
This function is you to select the
Default Sync Time.
Position This function is to adjust picture
to left/right and up/down as you
prefer.
Clock
This function is to minimize any
vertical bars or stripes visible on
the screen background. And the
horizontal screen size will also
change.
Phase
This function allows you to
remove any horizontal noise and
clear or sharpen the image of characters.
EXTERNAL EQUIPMENT SETUP
2
Resolution
Position
Clock
2
Press the O K button and then use F or G button to
select Y e s.
Initialize Settings.
Phase
Reset
G
Yes
Prev
3
No
Select
OK
Press the O K button.
25
WATCHING TV /PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
D/A INPUT Selects digital or analogue mode.
(Digital TV /
Analogue TV)
POWER
MODE
TV
INPUT
INPUT External input modes rotate in regular sequence: Digital,
Analogue, AV1-2, Component 1-2, RGB-PC, HDMI1,
HDMI2, HDMI3.
WATCHING TV/PROGRAMME CONTROL
i
INPUT
D/A
POWER Switches the set between ON and STANDBY.
VCR
BRIGHT
DVD
SIMPLINK
PIP
PIP PR-
SIMPLINK See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu appears
at the screen G p.45-46
BRIGHT Adjusts brightness on screen.
It returns to the default settings brightness by changing
mode source.
TEXT INFO i GUIDE
1
PIP PR+
SWAP
PIP INPUT
i
VCR/DVD Control some video cassette recorders or DVD players
control buttons ("RECORD" button is not available for DVD player).
Control the
mode.
mode control
buttons
MENU
MARK
OK
TIME
SHIFT
THUMBSTICK Adjusts menu settings.
(Up/Down/Left
Right) Selects menu item.
(TIME SHIFT)
LIVE
EXIT
TIME
SHIFT
Q.VIEW
VOL
PR
OK Accepts your selection or displays the current mode.
VOLUME Increase/decrease the sound level.
UP/DOWN
Q.VIEW Returns to the previously viewed programme.
MUTE Switches the sound on or off.
PROGRAMME Select a programme.
UP/DOWN
PAGE UP/DOWN Move from one full set of screen information to the next
one.
NUMBER button Selects a programme. Selects numbered items in a menu.
MUTE
1
2
3
4
5
6
7
8
9
LIST
0
FAV
SIZE
INDEX
TIME
?
LIST Displays the programme table.
FAV(FAVORITE) Displays the selected favourite programmes.
I/II Selects the sound output or the audio mode.
USBD Remove the USB device.
SLEEP Sets the sleep timer.
SUBTITLE Recalls your preferred subtitle in digital mode.
RATIO Selects your desired picture format.
26
REVEAL
I/II
SLEEP
SUBTITLE
USB
RATIO
PAGE
TV, VCR, DVD Select the remote operating mode: TV, VCR, DVD. Select other operating modes, for the
remote to operate external devices.
INFOoo
i Shows the present screen information.
GUIDE Shows a programme schedule.
PIP PR +/- Selects a programme for the sub picture.
SWAP Alternates between main and sub picture in PIP/DW mode.
PIP INPUT Selects the input mode for the sub picture.
i
Coloured They are used as per the indications or functions displayed on the TV screen in the case of
Button Text displays (Teletext, EPG) and programme edit.
i
EXIT Returns to TV viewing from any menu.
MENU Selects a menu.
Enter to the
mode.
LIVE In delayed mode, the screen returns to Live programme from TV, AV1 and AV2 modes.
MARK Selects the wanted functions.
1
TELETEXT These buttons are used for teletext.
BUTTONS Text button is used to enable teletext services while other buttons are for teletext functions.
* For further det
Download PDF

advertising