LG | 60PM9700 | LG 50PM6700 Owner’s Manual

OWNER’S MANUAL
PLASMA TV
Please read this manual carefully before operating
your set and retain it for future reference.
PM47**
PM67**
PM97**
P/NO : MFL67500901 (1210-REV06)
Printed in Korea
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
ENG
TABLE OF CONTENTS
3
LICENSES
33
TROUBLESHOOTING
3
OPEN SOURCE SOFTWARE NOTICE
34
ENVIRONMENTAL INFORMATION
4
SAFETY INSTRUCTIONS
34
EXTERNAL CONTROL DEVICE SETUP
10
- Viewing 3D Imaging (Only 3D models)
12
INSTALLATION PROCEDURE
35
SPECIFICATIONS
12
ASSEMBLING AND PREPARING
12
16
17
18
19
19
21
22
23
Unpacking
Separate purchase
Parts and buttons
Lifting and moving the TV
Setting up the TV
- Attaching the stand
Mounting on a table
Mounting on a wall
Tidying cables
24
MAKING CONNECTIONS
24
25
26
26
27
27
28
28
28
Antenna Connection
HDMI Connection
DVI to HDMI Connection
RGB-PC Connection
Component Connection
Composite Connection
Audio Connection
- Digital optical audio connection
USB Connection
29
REMOTE CONTROL
30
MAGIC REMOTE CONTROL
FUNCTIONS
31
31
31
Registering Magic Remote Control
How to use Magic Remote Control
Precautions to Take when Using the Magic
Remote Control
32
USING THE USER GUIDE
33
MAINTENANCE
33
33
33
Cleaning your TV
- Screen, frame, cabinet and stand
- Power cord
WARNING
yy If you ignore the warning message, you may
be seriously injured or there is a possibility
of accident or death.
CAUTION
yy If you ignore the caution message, you may
be slightly injured or the product may be
damaged.
NOTE
yy The note helps you understand and use
the product safely. Please read the note
carefully before using the product.
LICENSES / OPEN SOURCE SOFTWARE NOTICE
3
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or y
registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays
DivX video. Visit divx.com for more information and software tools to convert your
files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or
its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274”
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535
& other U.S. and worldwide patents issued & pending. DTS, the Symbol & DTS and
the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark
of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com .
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping and handling) upon email request to
opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the
product.
ENGLISH
ENG
LICENSES
4
SAFETY INSTRUCTIONS
ENGLISH
ENG
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
Do not place the TV and remote control in the following environments:
yy
--A location exposed to direct sunlight
--An area with high humidity such as a bathroom
--Near any heat source such as stoves and other devices that produce heat
--Near kitchen counters or humidifiers where they can easily be exposed to steam
or oil
--An area exposed to rain or wind
--Near containers of water such as vases
Otherwise, this may result in fire, electric shock, malfunction or product deformation.
Do not place the product where it might be exposed to dust. y
yy
This may cause a fire hazard.
Mains plug is the disconnecting device. The plug must remain readily operable.
yy
Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or
yy
covered with dust, dry the power plug completely or wipe dust off. y
You may be electrocuted due to excess moisture.
Make sure to connect the power cable to the grounded current. (Except for devices
yy
which are not grounded.)
You may be electrocuted or injured.
Fix the power cable completely. y
yy
If the power cable is not fixed completely, a fire can break out.
Ensure the power cord does not come into contact with hot objects such as a
yy
heater. y
This may cause a fire or an electric shock hazard.
Do not place a heavy object, or the product itself, on power cables. y
yy
Otherwise, this may result in fire or electric shock.
Bend antenna cable between inside and outside building to prevent rain from
yy
flowing in. y
This may cause water damaged inside the Product and could give an electric
shock.
When mounting a TV it on the wall, make sure not to install TV by hanging power
yy
and signal cables on the back of the TV. y
It may cause fire, electric shock.
SAFETY INSTRUCTIONS
Do not drop the product or let it fall over when connecting external devices. y
yy
Otherwise, this may result in injury or damage to the product.
Des
icca
nt
Keep the packing anti-moisture material or vinyl packing out of the reach of
yy
children. y
Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the
patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause
suffocation. Keep it out of the reach of children.
Do not let your children climb or cling onto the TV. y
yy
Otherwise, the TV may fall over, which may cause serious injury.
Dispose of used batteries carefully to protect a child from eating them. y
yy
Please seek Doctor- Medical Attention immediately if child consumes batteries.
Do not insert any metal objects/conductors (like a metal chopstick/cutlery/
yy
screwdriver) between power cable plug and input Wall Socket while it is connected
to the input terminal on the wall. Additionally, do not touch the power cable right
after plugging into the wall input terminal. y
You may be electrocuted.y
(Depending on model)
Do not put or store inflammable substances near the product. y
yy
There is a danger of combustion/explosion or fire due to careless handling of the
inflammable substances.
Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the
yy
product, or inflammable objects such as paper and matches. Children must pay
particular attention. y
Electrical shock, fire or injury can occur. If a foreign object is dropped into the
product, unplug the power cord and contact the service centre.
Do not spray water on the product or scrub with an inflammable substance (thinner
yy
or benzene). Fire or electric shock accident can occur.
Do not allow a impact shock or any objects to fall into the product, and do not drop
yy
onto the screen with something. y
You may be injured or the product can be damaged.
Never touch this product or antenna during a thunder or lighting storm. y
yy
You may be electrocuted.
Never touch the wall outlet when there is leakage of gas, open the windows and
yy
ventilate. y
It may cause a fire or a burn by a spark.
ENGLISH
ENG
Do not plug too many electrical devices into a single multiple electrical outlet. y
yy
Otherwise, this may result in fire due to over-heating.
5
6
SAFETY INSTRUCTIONS
ENGLISH
ENG
Do not disassemble, repair or modify the product at your own discretion. y
yy
Fire or electric shock accident can occur. y
Contact the service center for check, calibration or repair.
If any of the following occur, unplug the product immediately and contact your local
yy
service centre.
--The product has been impacted by shock
--The product has been damaged
--Foreign objects have entered the product
--The product produced smoke or a strange smell
This may result in fire or electric shock.
If you don’t intend to use the product for a long time, unplug the power cable from
yy
the product. y
Covering dust can cause a fire, or insulation deterioration can cause electric
leakage, electric shock or fire.
Apparatus shall not be exposed to dripping or splashing and no objects filled with
yy
liquids, such as vases, shall be placed on the apparatus.
SAFETY INSTRUCTIONS
Install the product where no radio wave occurs.
yy
There should be enough distance between an outside antenna and power lines to
yy
keep the former from touching the latter even when the antenna falls. y
This may cause an electric shock.
Do not install the product on places such as unstable shelves or inclined surfaces.
yy
Also avoid places where there is vibration or where the product cannot be fully
supported. y
Otherwise, the product may fall or flip over, which may cause injury or damage to
the product.
If you install the TV on a stand, you need to take actions to prevent the product
yy
from overturning. Otherwise, the product may fall over, which may cause injury.
If you intend to mount the product to a wall, attach VESA standard mounting interface (optional
yy
parts) to the back of the product. When you install the set to use the wall mounting bracket (optional
parts), fix it carefully so as not to drop.
Only use the attachments / accessories specified by the manufacturer.
yy
When installing the antenna, consult a qualified service man. y
yy
This may create a fire hazard or an electric shock hazard.
We recommend that you maintain a distance of at least 2 to 7 times the diagonal
yy
screen size when watching TV. y
If you watch TV for a long period of time, this may cause blurred vision.
Only use the specified type of battery. y
yy
This could cause damage to the remote control.
Do not mix new batteries with old batteries. y
yy
This may cause the batteries to overheat and leak.
Make sure there are no objects between the remote control and its sensor.
yy
Signal from the remote control may be disturbed by sun light or other strong light.
yy
In this case, darken the room.
When connecting external devices such as video game consoles, make sure the
yy
connecting cables are long enough. y
Otherwise, the product may fall over, which may cause injury or damage the
product.
ENGLISH
ENG
CAUTION
7
8
SAFETY INSTRUCTIONS
ENGLISH
ENG
Do not turn the product On/Off by plugging-in or unplugging the power plug to the
yy
wall outlet. (Do not use the power plug for switch.) y
It may cause mechanical failure or could give an electric shock.
Please follow the installation instructions below to prevent the product from
yy
overheating.
--The distance between the product and the wall should be more than 10 cm.
--Do not install the product in a place with no ventilation (e.g., on a bookshelf or in
a cupboard).
--Do not install the product on a carpet or cushion.
--Make sure the air vent is not blocked by a tablecloth or curtain.
Otherwise, this may result in fire.
Take care not to touch the ventilation openings when watching the TV for long
yy
periods as the ventilation openings may become hot. This does not affect the
operation or performance of the product.
Periodically examine the cord of your appliance, and if its appearance indicates damage or
yy
deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact
replacement part by an authorized servicer.
Prevent dust collecting on the power plug pins or outlet. y
yy
This may cause a fire hazard.
Protect the power cord from physical or mechanical abuse, such as being twisted,
yy
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.
Do not press strongly upon the panel with a hand or sharp object such as nail,
yy
pencil or pen, or make a scratch on it.
Avoid touching the screen or holding your finger(s) against it for long periods of
yy
time. Doing so may produce some temporary distortion effects on the screen.
When cleaning the product and its components, unplug the power first and wipe it
yy
with a soft cloth. Applying excessive force may cause scratches or discolouration.
Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or
industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the
product and its panel. y
Otherwise, this may result in fire, electric shock or product damage (deformation,
corrosion or breakage).
As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power
yy
source even if you turn off this unit by SWITCH.
When unplugging the cable, grab the plug and unplug it. y
yy
If the wires inside the power cable are disconnected, this may cause fire.
When moving the product, make sure you turn the power off first. Then, unplug the
yy
power cables, antenna cables and all connecting cables. y
The TV set or power cord may be damaged, which may create a fire hazard or
cause electric shock.
SAFETY INSTRUCTIONS
Contact the service center once a year to clean the internal parts of the product. y
yy
Accumulated dust can cause mechanical failure.
Refer all servicing to qualified service personnel. Servicing is required when the
yy
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
If the product feels cold to the touch, there may be a small “flicker” when it is turned
yy
on. This is normal, there is nothing wrong with product.
The panel is a high technology display product with resolution of two million to six
yy
million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue
or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and
does not affect the performance and reliability of the product. y
This phenomenon also occurs in third-party products and is not subject to
exchange or refund.
You may find different brightness and color of the panel depending on your viewing
yy
position(left/right/top/down). y
This phenomenon occurs due to the characteristic of the panel. It is not related with
the product performance, and it is not malfunction.
Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video
yy
game) for a prolonged time may cause damage to the screen, resulting in retention of the image,
which is known as image sticking. The warranty does not cover the product for image sticking. y
Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours
for LCD, 1 or more hours for Plasma). y
Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of
the panel. y
This phenomenon also occurs in third-party products and is not subject to exchange or refund.
Generated Sound
yy
“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by
plastic thermal contraction due to tempera-ture and humidity. This noise is common for products
where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is
generated from a high-speed switching circuit, which supplies a large amount of current to operate a
product. It varies depending on the product. y
This generated sound does not affect the performance and reliability of the product.
ENGLISH
ENG
When moving or unpacking the product, work in pairs because the product is
yy
heavy. y
Otherwise, this may result in injury.
9
10 SAFETY INSTRUCTIONS
ENGLISH
ENG
Viewing 3D Imaging (Only 3D models)
WARNING
Viewing Environment
yy Viewing Time
-- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long
period of time may cause headache, dizziness, fatigue or eye strain.
Those that have a photosensitive seizure or chronic illness
yy Some users may experience a seizure or other abnormal symptoms when they are exposed to a
flashing light or particular pattern from 3D contents.
yy Do not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as epilepsy,
cardiac disorder, or blood pressure disease, etc.
yy 3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly. Double
images or discomfort in viewing may be experienced.
yy If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble
sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than
the average adult.
yy If your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D
contents.
Symptoms which require discontinuation or refraining from watching 3D contents
yy Do not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking.
yy When these symptoms are experienced, stop using/watching 3D contents and get enough rest until the
symptom subsides.
-- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain,
dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.
SAFETY INSTRUCTIONS
11
Viewing Environment
� Viewing Distance
- Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you
feel discomfort in viewing 3D contents, move further away from the TV.
� Viewing Position
-- Face the center of the screen at eye level with the head looking straight ahead. Otherwise, you may
not be able to view 3D contents properly.
Viewing Age
yy Infants/Children
-- Usage/ Viewing 3D contents for children under the age of 5 are prohibited.
-- Children under the age of 10 may overreact and become overly excited because their vision is in
development (for example: trying to touch the screen or trying to jump into it. Special monitoring
and extra attention is required for children watching 3D contents.
-- Children have greater binocular disparity of 3D presentations than adults because the distance
between the eyes is shorter than that of adults. Therefore they will perceive more stereoscopic
depth compared to adults for the same 3D image.
yy Teenagers
-- Teenagers under the age of 19 may react with sensitivity due to stimulation from light in 3D
contents. Advise them to refrain from watching 3D contens for a long time when they are tired.
yy Elderly
-- The elderly may perceive less 3D effect compared to the young. Do not sit closer to the TV than the
recommended distance.
Cautions when using the 3D glasses
� Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.
� Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.
� Using modified 3D glasses may cause eye strain or image distortion.
� Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.
� The 3D glasses are fragile and are easily scratched. Always use a soft, clean piece of cloth when wiping
the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with
chemicals.
y
y When watching 3D videos under fluorescent lights or with three wave length lamps, you may experience
the screen blinking. When this occurs, turn the light off or turn it down.
y
y Other electronic or communication devices should be turned off or put away from the TV because it can
cause interference and prevent the 3D function from working properly.
y
y When you watch TV lying down, 3D images may look darker or invisible.
ENGLISH
ENG
CAUTION
12 INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
ENGLISH
ENG
NOTE
yy Image shown may differ from your TV.
yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yy The available menus and options may differ from the input source or product model that you are
using.
yy New features may be added to this TV in the future.
yy The TV can be placed in standby mode in order to reduce the power consumption. And the TV should
be turned off if it will not be watched for some time, as this will reduce energy consumption.
yy The energy consumed during use can be significantly reduced if the level of brightness of the picture
is reduced, and this will reduce the overall running cost.
INSTALLATION PROCEDURE
1
2
3
4
Open the package and make sure all the accessories are included.
Attach the stand to the TV set.
Connect an external device to the TV set.
Make sure the network connection is available.y
You can use the TV network functions only when the network connection is made.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
CAUTION
yy Do not use any unapproved items to ensure the safety and product life span.
yy Any damage or injuries caused by using unapproved items are not covered by the manufacturer’s
warranty.
y
y Some models have a thin film attached on to the screen and this must not be removed.
ASSEMBLING AND PREPARING
13
ENERGY AV MODE INPUT
TV
TV
1
4
7
2
5
3
6
8
9
0
FLASHBK
2
3
4
5
6
7
SAVING
LIST
1
LIST
3D
CH
P
A
G
E
Remote Control,
Batteries (AAA)
(See p. 29)
Q.MENU
ENTER
BACK
FLASHBK
MENU INFO
MUTE
MENU INFO
9
0
3D
CH
Magic Remote Control,
Batteries (AA)
(Only 50/60PM97**-TA,
50/60PM67**-TD/TK)
(See p. 30)
P
A
G
E
MUTE
FAV
VOL
8
MARK
FAV
VOL
MARK
EXIT
L/R SELECT
FREEZE
RATIO
P
Q.MENU
ENTER
BACK
EXIT
L/R SELECT
FREEZE
RATIO
Polishing cloth
(Depending on model)
Use this to remove dust
from the cabinet.
Owner’s manual
Power Cord
x4
x3
M4 x 30 M5 x 16
Power Cord Holder
(See p. 23)
Protection Cover
(See p. 20)
Ferrite core
(Depending on model)
(See p. 14)
Cable Holder
(Depending on model)
(See p. 23)
3D Glasses
(AG-S350)
(Depending on model)
Screw for assembly
(Only 42/50PM47**-TA/TD,
50/60PM67**-TD, 50PM67**-TK,
50PM97**-TA)
(See p. 19)
x4
M4 x 30 M5 x 16
Stand Body / Stand Base
(Only 42/50PM47**-TA/TD,
50/60PM67**-TD)y
(See p. 19)
Cable management
(Only 50/60PM67**-TK,
50/60PM97**-TA)y
(See p. 19)
x5
Screw for assembly
(Only 60PM67**-TK,
60PM97**-TA)y
(See p. 19)
Stand Body / Stand Base
(Only 50/60PM67**-TK,
50/60PM97**-TA)y
(See p. 19)
or
Isolator
(Depending on model)
(See p. 15)
ENGLISH
ENG
SAVING
ENERGY AV MODE INPUT
14 ASSEMBLING AND PREPARING
ENGLISH
ENG
NOTE
The items supplied with your product may vary depending on the model.
yy
Product specifications or contents of this manual may be changed without prior notice due to upgrade
yy
of product functions.
How to use the ferrite core
1 Use the ferrite core to reduce the electromagnetic interference in the PC audio cable.
Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.
(Gray)
10 mm(+ / - 5 mm)
[to an External device]
[to the TV]
[Figure 1]
[Cross Section of
Ferrite Core]
2 Use the ferrite core to reduce the electromagnetic interference in the power cable. y
Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.
(Black)
[to the TV]
[to a wall plug]
[Figure 2]
[Cross Section of
Ferrite Core]
3 Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the LAN
cable once on the ferrite core B and thrice on the ferrite core A. Place the ferrite core close to the TV
and an External device.
A (Gray) B (Gray)
[to an External
[to the TV]
device]
A
A
B
[Cross Section of
[Figure 3]
Ferrite Core]
4 Use the ferrite core supplied to reduce the effects of electromagnetic interference induced into
Component Video Y, Pb , Pr , L and R audio cables. Wind the Component Video Y, Pb , Pr , L and R
audio cables on the ferrite core once. Place the ferrite core as close as possible to the TV connecting
end of cables.
(Black)
[to an External device]
[to the TV]
10 mm(+ / - 5 mm)
[Figure 4]
[Cross Section of
Ferrite Core]
- If there are four ferrite cores, attach as per Figure 1 and 3.
- If there are five ferrite cores, attach as per Figure 1,3 and 4.
- If there are six ferrite cores, attach as per Figure 1,2 and 3.
- If there are seven ferrite cores, attach as per Figure 1,2,3 and 4.
For an optimal connection, HDMI cables and USB
yy
devices should have bezels less than 10 mm thick
and 18 mm width. Use an extension cable that
supports USB 2.0 if the USB cable or USB memory
stick does not fit into your TV’s USB port.
*A
*B
10 mm
18 mm
ASSEMBLING AND PREPARING
yy Antenna Isolator Installation Guide
-- Use this to install TV in a place where there is a voltage difference between TV Set and GND of
antenna signal.
»» If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact
may get hot and excessive heat might cause an accident.
-- You can improve the safety when watching TV by efficiently removing power voltage from TV
antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall,
mount it on the TV. Avoid disconnecting the antenna Isolator after installation.
-- Before starting, be sure that the TV antenna is connected.
1. Connect to TV.
Wall
ANTENNA/
CABLE IN
Cable / Antenna
or
Isolator
2. Connect to Set-Top box.
Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.
“Equipment connected to the protective earthing of the building installation through the mains
connection or through other equipment with a connection to protective earthing - and to a cable
distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection
to a cable distribution system has therefore to be provided through a device providing electrical
isolation below a certain frequency range (galvanic isolator, see EN 60728-11)”
When applying the RF Isolator, a slight loss of signal sensitivity can occur.
ENGLISH
ENG
NOTE
15
16 ASSEMBLING AND PREPARING
ENGLISH
ENG
Separate purchase
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items.
These devices only work with certain models.
P
AG-S3**
3D Glasses
AN-WF100
Wireless LAN
AN-MR300
Magic Remote Control
AN-VC***
Video Call Camera
Compatibility
PM47**
PM67**
PM97**
AG-S3** 3D Glasses
•
•
•
AN-WF100
Wireless LAN
•
AN-MR300
Magic Remote Control
•
•
•
•
•
•
AN-VC*** Video Call Camera
The model name or design may be changed depending on the upgrade of product functions, manufacturer’s
circumstances or policies.
ASSEMBLING AND PREPARING
17
ENGLISH
ENG
Parts and buttons
Screen
Remote control and
intelligent sensors1
Power indicator
Speakers
INPUT
SETTINGS
OK
Buttons
Except for
PM47**
AV IN
COMPONENT IN
VIDEO
Y
PB
/I
SETTINGS
OK ꔉ
H
H
PR
L
R
1
VIDEO
Button
INPUT
L/MONO AUDIO R
2
Connection
panel
AUDIO
Description
Turns the power on or off.
Changes the input source.
Accesses the main menus, or saves your input and exits the menus.
Selects the highlighted menu option or confirms an input.
Adjusts the volume level.
Scrolls through the saved programmes.
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
18 ASSEMBLING AND PREPARING
ENGLISH
ENG
Lifting and moving the TV
Please note the following advice to prevent the
TV from being scratched or damaged and for safe
transportation regardless of its type and size.
yy When transporting a large TV, there should be
at least 2 people.
yy When transporting the TV by hand, hold the TV
as shown in the following illustration.y
CAUTION
yy Avoid touching the screen at all times, as
this may result in damage to the screen.
yy It is recommended to move the TV in the box
or packing material that the TV originally came
in.
yy Before moving or lifting the TV, disconnect the
power cord and all cables.
yy When holding the TV, the screen should face
away from you to avoid damage.y
yy Hold the top and bottom of the TV frame firmly.
Make sure not to hold the transparent part,
speaker, or speaker grill area.y
yy When transporting the TV, do not expose the
TV to jolts or excessive vibration.
yy When transporting the TV, keep the TV upright,
never turn the TV on its side or tilt towards the
left or right.
ASSEMBLING AND PREPARING
19
ENGLISH
ENG
Setting up the TV
Image shown may differ from your TV.
Attaching the stand
Only 42/50PM47**-TA/TD, 50/60PM67**-TD
1
M5 x 16
3EA
Only 50/60PM67**-TK, 50/60PM97**-TA
1
Stand Body
Front
Stand Body
Front
Only 50PM67**-TK, 50PM97**-TA
M5 x 16
3EA
Only 60PM67**-TK, 60PM97**-TA
Stand Base
M5 x 16
5EA
Stand Base
2
2
3
3
M4 x 30
4EA
4
M4 x 30
4EA
Cable management
20 ASSEMBLING AND PREPARING
ENGLISH
ENG
To detach the stand,
1
CAUTION
Only 42/50PM47**-TA/TD, 50/60PM67**-TD
M4 x 30
4EA
Only 50/60PM67**-TK, 50/60PM97**-TA
M4 x 30
4EA
2
Protection Cover
3
M4 x 30
2EA
yy When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect the
screen from scratches.
yy Make sure that the screws are inserted
correctly and fastened securely. (If they are
not fastened securely enough, the TV may
tilt forward after being installed.)y
Do not use too much force and over tighten
the screws; otherwise screw may be
damaged and not tighten correctly.
NOTE
yy When installing the wall mounting bracket,
use the Protection Cover.
yy This will protect the opening from
accumulating dust and dirt. yy Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
ASSEMBLING AND PREPARING
Securing the TV to a wall
1 Lift and tilt the TV into its upright position on a
table.
-- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
(This feature is not available for all models.)
10 cm
10 cm
m
10 c
10 cm
2 Connect the power cord to a wall outlet.
CAUTION
yy Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
Adjusting the angle of the TV to suit view
(This feature is not available for all models.)
Adjusting the angle of the TV to suit view
Swivel 20 degrees to the left or right and adjust the
angle of the TV to suit your view.
y
20˚
20˚
CAUTION
When adjusting the angle of the product,
watch out for your fingers.
»»Personal injury may occur if hands or fingers
are pinched. If the product is tilted too much,
it may fall, causing damage or injury.
1 Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
-- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.y
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope.y
Make sure to keep the rope horizontal with the
flat surface.
CAUTION
yy Make sure that children do not climb on or
hang on the TV.
NOTE
yy Use a platform or cabinet that is strong and
large enough to support the TV securely.
yy Brackets, bolts and ropes are not provided.
You can obtain additional accessories from
your local dealer.
ENGLISH
ENG
Mounting on a table
21
22 ASSEMBLING AND PREPARING
ENGLISH
ENG
Mounting on a wall
Attach an optional wall mount bracket at the rear
of the TV carefully and install the wall mount
bracket on a solid wall perpendicular to the
floor. When you attach the TV to other building
materials, please contact qualified personnel.
LG recommends that wall mounting be performed
by a qualified professional installer.
10 cm
10 cm
10 cm
10 cm
Make sure to use screws and wall mount bracket
that meet the VESA standard. Standard
dimensions for the wall mount kits are described in
the following table.
Separate purchase(Wall Mounting Bracket)
42/50PM47**
Model
50PM67**
50PM97**
VESA (A x B)
400 x 400
Standard screw M6
Number of
4
screws
Wall mount
PSW400B
bracket
PSW420BX
60PM67**
60PM97**
600 x 400
M8
4
PSW600B
PSW620BX
A
B
CAUTION
yy Disconnect the power first, and then move
or install the TV. Otherwise electric shock
may occur.
yy If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.y
Use an authorised LG wall mount and
contact the local dealer or qualified
personnel.
yy Do not over tighten the screws as this may
cause damage to the TV and void your
warranty.
yy Use the screws and wall mounts that meet
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the manufacturer’s
warranty.
NOTE
yy Use the screws that are listed on the VESA
standard screw specifications.
yy The wall mount kit includes an installation
manual and necessary parts.
yy The wall mount bracket is not provided. You
can obtain additional accessories from your
local dealer.
yy The length of screws may differ depending
on the wall mount. Make sure to use the
proper length.
yy For more information, refer to the manual
supplied with the wall mount.
ASSEMBLING AND PREPARING
1 Install the Power Cord Holder and Power Cord.
It will help prevent the power cable from being
removed by accident.
Power Cord Holder
2 Use Cable Holder to neatly secure and
position cables together. Position the LAN
Cable as shown to reduce the electromagnetic
interference wave.
y
Cable Holder
CAUTION
yy Do not move the TV by holding the cable
holder and power cable holder, as the cable
holders may break, and injuries and damage
to the TV may occur.
ENGLISH
ENG
Tidying cables
23
24 MAKING CONNECTIONS
ENGLISH
ENG
MAKING
CONNECTIONS
Antenna Connection
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
This section on MAKING CONNECTIONS mainly
uses diagrams for the PM97** models.
Connect various external devices to the TV
and switch input modes to select an external
device. For more information of external device’s
connection, refer to the manual provided with each
device.
Available external devices are: HD receivers,
DVD players, VCRs, audio systems, USB storage
devices, PC, gaming devices, and other external
devices.
Wall Antenna
Socket
NOTE
yy The external device connection may differ
from the model.
yy Connect external devices to the TV
regardless of the order of the TV port.
yy If you record a TV program on a DVD
recorder or VCR, make sure to connect the
TV signal input cable to the TV through a
DVD recorder or VCR. For more information
of recording, refer to the manual provided
with the connected device.
yy Refer to the external equipment’s manual for
operating instructions.
yy If you connect a gaming device to the TV,
use the cable supplied with the gaming
device.
yy In PC mode, there may be noise associated
with the resolution, vertical pattern, contrast
or brightness. If noise is present, change
the PC output to another resolution, change
the refresh rate to another rate or adjust the
brightness and contrast on the PICTURE
menu until the picture is clear.
yy In PC mode, some resolution settings may
not work properly depending on the graphics
card.
NOTE
yy Use a signal splitter to use more than 2 TVs.
yy If the image quality is poor, install a signal
amplifier properly to improve the image
quality.
yy If the image quality is poor with an antenna
connected, try to realign the antenna in the
correct direction.
yy An antenna cable and converter are not
supplied.
MAKING CONNECTIONS
Transmits the digital video and audio signals from
an external device to the TV. Connect the external
device and the TV with the HDMI cable as shown.
IN 1(ARC)
DVD / Blu-Ray / PC
HD Cable Box / HD STB
USB
SB IN 1/ USBApps
A
/ DVI IN 2 U
Choose any HDMI input port to connect. It does
not matter which port you use.
HDMI
(*Not Provided)
NOTE
yy It is recommended to use the TV with the
HDMI connection for the best image quality.
yy Use the latest High Speed HDMI™ Cable
with CEC (Customer Electronics Control)
function.
yy High Speed HDMI™ Cables are tested to
carry an HD signal up to 1080p and higher.
yy Supported DTV Audio: MPEG, Dolby Digital,
Dolby Digital Plus, HE-AAC
yy Supported HDMI Audio format : Dolby
Digital, PCM (Up to 192 KHz, 32k/44.1k/48k
/88k/96k/176k/192k, DTS Not supported.)
ARC (Audio Return Channel)
An external audio device that supports
yy
SIMPLINK and ARC must be connected
using HDMI IN 1 (ARC) port.
When connected with a high-speed
yy
HDMI cable, the external audio device
that supports ARC outputs optical SPDIF
without additional optical audio cable and
supports the SIMPLINK function.
ENGLISH
ENG
HDMI Connection
25
26 MAKING CONNECTIONS
RGB-PC Connection
Transmits the digital video signal from an external
device to the TV. Connect the external device and
the TV with the DVI-HDMI cable as shown. To
transmit an audio signal, connect an audio cable.
Transmits the video signal from PC to the TV. To
transmit an audio signal, connect an audio cable.
USB
SB IN 1/ USBApps
A
/ DVI IN 2 U
Choose any HDMI input port to connect. It does
not matter which port you use.
AUDIO IN
(RGB/DVI)
RGB IN
(PC)
IN 1(ARC)
( C)
ENGLISH
ENG
DVI to HDMI Connection
(*Not Provided)
PC
(*Not Provided)
RGB OUT (PC) AUDIO OUT
AUDIO OUT
DVI OUT
DVD / Blu-Ray / PC / HD Cable Box
NOTE
yy Depending on the graphics card, DOS mode
may not work if a HDMI to DVI Cable is in
use.
MAKING CONNECTIONS
27
Composite Connection
Transmits analog video and audio signals from an
external device to the TV. Connect the external
device and the TV with a component cable as
shown.
Transmits analog video and audio signals from an
external device to the TV. Connect the external
device and the TV with th e composite cable as
shown.
2
L
PR
R
1
AUDIO
VIDEO
Y
1
RED
WHITE
RED
BLUE
GREEN
(*Not Provided)
PB
PR
L
R
AUDIO
VIDEO
(*Not Provided)
RED
L(MONO) R
RED
VIDEO
WHITE
AUDIO
YELLOW
WHITE
RED
BLUE
GREEN
VIDEO
2
RED
PB
L/MONO AUDIO R
WHITE
Y
AV IN
VIDEO
YELLOW
COMPONENT IN
L/MONO AUDIO R
COMPONENT IN
AV IN
VIDEO
AUDIO
DVD / Blu-Ray / HD Cable Box
VCR / DVD / Blu-Ray / HD Cable Box
NOTE
yy If cables are not installed correctly, it could
cause this image to display in black and
white or with distorted colours.
ENGLISH
ENG
Component Connection
28 MAKING CONNECTIONS
USB Connection
You may use an optional external audio system
instead of the built-in speaker.
Connect a USB storage device such as a USB
flash memory, external hard drive, or a USB
memory card reader to the TV and access the
Smart Share menu to use various multimedia files.
NOTE
Transmits a digital audio signal from the TV to an
external device. Connect the external device and
the TV with the optical audio cable as shown.
HDD
HUB
USB Hub
Digital optical audio connection
HDD IN
yy If you use an optional external audio device
instead of the built-in speaker, set the TV
speaker feature to off.
/ DVI IN 2 USB IN 1/ USB Apps USB IN 2
ENGLISH
ENG
Audio Connection
USB
(*Not Provided)
(*Not Provided)
NOTE
(*Not Provided)
OPTICAL AUDIO IN
Digital Audio System
NOTE
yy Do not look into the optical output port.
Looking at the laser beam may damage
your vision.
yy Audio with ACP (Audio Copy Protection)
function may block digital audio output.
yy To use a USB Hub device, make sure that it
is connected to the USB Hub port.
yy Connect the external power source if your
USB is needed.
yy Some USB Hubs may not work. If a USB
device connected using a USB Hub is not
detected, connect it to the USB port on the
TV directly.
REMOTE CONTROL
29
ENGLISH
ENG
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching
the
and
ends to the label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
yy Do not mix old and new batteries, as this may damage the remote control.
yy In Analogue TV and some countries, some remote control buttons may not work.
Make sure to point the remote control toward the remote control sensor on the TV.
(User Guide)
Sees user-guide.
RATIO
Resizes an image.
INPUT
Changes the input source.
TV/RAD
Selects Radio, TV and DTV programme.
LIST
Accesses the saved programme list.
Q.VIEW
Returns to the previously viewed programme.
FAV
Accesses your favourite programme.
EXIT
Clears all on-screen displays and return to TV
viewing.
RATIO
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
FAV
P
MUTE
SETTINGS
HOME
MY APPS
OK
HOME
Accesses the Home menus.
(Back)
Returns to the previous level.
GUIDE
Shows programme guide.
1 Colour buttons
These access special functions in some
menus.
( : Red,
: Green,
: Yellow,
: Blue)
TV /
RAD
Used for viewing 3D video.
PAGE
Moves to the previous or next screen.
SETTINGS
Accesses the main menus.
MY APPS
Shows the list of Apps.
Navigation buttons (up/down/left/right)
Scrolls through menus or options.
OK
Selects menus or options and confirms your
input.
INPUT
GUIDE
1
2
EXIT
SUBTITLE
TEXT
T.OPT
Q.MENU
LIVE TV
REC
ENERGY
INFO
SAVING
or
2
SUBTITLE
TEXT
ENERGY
SAVING
T.OPT
Q.MENU
P
A
G
E
2 TELETEXT BUTTONS
These buttons are used for teletext.
SUBTITLE
Recalls your preferred subtitle in digital
mode.
Q. MENU
Accesses the quick menus.
LIVE TV
Return to LIVE TV. (Depending on model)
Control buttons (
)
Controls the Premium contents, DVR or
Smart Share menus or the SIMPLINK
compatible devices (USB or SIMPLINK or
DVR).
REC
Uses to adjust DVR menu. (Depending on model)
ENERGY SAVING
Adjusts the brightness of the screen to reduce
energy consumption.
INFO
Views the information of the current programme
and screen. (Depending on model)
Accesses the AV devices connected with the
HDMI cable through HDMI-CEC. Opens the
SIMPLINK menu.
30 MAGIC REMOTE CONTROL FUNCTIONS
ENGLISH
ENG
MAGIC REMOTE CONTROL FUNCTIONS
This item is not included for all models.
When the message “Magic Remote Control battery is low. Change the battery.” is
displayed, replace the battery.
To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover. Be sure
to point the remote control toward the remote control sensor on the TV.
To remove the batteries, perform the installation actions in reverse.
CAUTION
yy Do not mix old and new batteries, as this may damage the remote control.
yy Do not need Magic remote Dongle to operate the magic remote control. The Receiver is built into the TV.
Pointer (RF transmitter)
Blinks the light when operating.
(POWER)
Turns the TV on or off.
BACK
Returns to the previous level.
BACK
HOME
HOME
Accesses the Home menu.
Navigation buttons
(up/down/left/right)
Scrolls through menus or options.
Wheel(OK)
Selects menus or options and
confirms your input.
Scrolls through the saved
programmes.
If you press the navigation
button while moving the pointer
on the screen, the pointer
disappears, and the Magic
Remote Control works as a
regular remote control.
To display the pointer again,
shake the Magic Remote
Control from side to side.
P
MY APPS
+
Adjusts the volume level.
ꕌPꕍ
Scrolls through the saved
programmes or channels.
MUTE
Mutes all sounds.
MY APPS
Shows the list of Apps.
Used for viewing 3D video.
11-1 Brief Info Title Test...
Info.
1
2
My Apps
3
If you press Wheel(OK) on the Magic Remote
Control, the following screen appears.
Shows information about the current
programme and screen.
Pressing this button will display number keypad
which you can select programme number.
3 You can select Quick Menu.
MAGIC REMOTE CONTROL FUNCTIONS
It is necessary to ‘pair’ (register) the magic remote
control to your TV before it will work.
BACKto register
HOME
How
the Magic Remote Control
P
MY APPS
1 To register automatically,
turn the TV on and press the
Wheel(OK) button. When
registration is completed, the
completion message appears
on the screen.
2 If registration fails, turn the TV
off and back on, then press
the Wheel(OK) button to
complete registration.
How to re-register the Magic Remote Control
BACK
HOME
1 Press and hold the BACK and HOME buttons together
for 5 seconds to reset, then
register it by following “How
to register the Magic Remote
Control” above.
2 To re-register the Magic
Remote Control, press and
hold the BACK button for 5
seconds toward the TV. When
registration is completed, the
completion message appears
on the screen.
How to use Magic Remote
Control
1 If the pointer disappears, move
the remote control slightly
to left or right. Then, it will
automatically appear on the
screen.
»»If the pointer has not been
used for a certain period of
time, it will disappear.
2 You can move the pointer by
aiming the Pointer Receiver of
the remote control at your TV
then move it left, right, up or
down.
»»If the pointer does not work
properly, leave the remote
control for 10 seconds then
use it again.
Precautions to Take when
Using the Magic Remote
Control
Use the remote control within the maximum
yy
communication distance (10 m). Using the
remote control beyond this distance, or
with an object obstructing it, may cause a
communication failure.
A communication failure may occur due to
yy
nearby devices. Electrical devices such as
a microwave oven or wireless LAN product
may cause interference, as these use the
same bandwidth (2.4 GHz) as the Magic
Remote Control.
The Magic Remote Control may be damaged
yy
or may malfunction if it is dropped or receives
a heavy impact.
Take care not to bump into nearby furniture
yy
or other people when using the Magic
Remote Control.
Manufacturer and installer cannot provide
yy
service related to human safety as the
applicable wireless device has possibility of
electric wave interference.
It is recommended that an Access Point (AP)
yy
be located more than 1 m away from the
TV. If the AP is installed closer than 1 m, the
Magic Remote Control may not perform as
expected due to frequency interference.
ENGLISH
ENG
Registering Magic Remote
Control
31
32 USING THE USER GUIDE
ENGLISH
ENG
USING THE USER GUIDE
User Guide allows you to more easily access the detailed TV information.
1 Press the HOME button to access the HOME
menu.
2 Select User Guide and press Wheel(OK).
1
User Guide
OPTION > To set language
HOME  Settings  OPTION  Language
Selects Menu Language and Audio Language displayed on the screen.
Menu Language Selects a language for the display text.
PROGRAMME Setting
[In Digital Mode Only]
Audio Language When watching a digital broadcast containing several
audio languages, you can select the language you want.
PICTURE, SOUND Setting
Subtitle
Language
OPTION
[In Digital Mode Only]
Use the Subtitle function when two or more subtitle
languages are broadcast.
✎ If subtitle data in a selected language is not broadcast,
the default language subtitle will be displayed.
LG SMART Function
Advanced Function
2
Information
My Apps
Input List
Settings
Live TV
Search
Internet
3D
LG Smart W
TV Guide
User Guide

yy You can also access the User Guide by
pressing (User Guide) in the remote
control.
4
3
To use input device
To use Energy Saving feature
PROGRAMME Setting
To set time options
PICTURE, SOUND Setting
OPTION
Disabled Assistance
Advanced Function
Information
To set TV lock options
To set language
LG SMART Function
2
Zoom In
Close
HOME  Settings  OPTION  Language
Selects Menu Language and Audio Language displayed on the screen.
Menu Language Selects a language for the display text.
[In Digital Mode Only]
Audio Language When watching a digital broadcast containing several
audio languages, you can select the language you want.
[In Digital Mode Only]
Use the Subtitle function when two or more subtitle
Subtitle
languages are broadcast.
Language
✎ If subtitle data in a selected language is not broadcast,
the default language subtitle will be displayed.
NOTE
1
3
Recent List
User Guide
User Guide
Try Now
To set Magic Remote Control
1
Shows the current watching programme or
input source screen.
2
Allows to select the category you want.
3
Allows to select the item you want.
You can use ꕌ/ꕍto move between pages.
4
Allows to browse the description of the
function you want from the index.
Try Now
3
Zoom Out
Close
1
Shows the description of the selected menu.y
You can use ꕌ/ꕍto move between pages.
2
Moves to the selected menu directly from the
User Guide.
3
Zooms in or out the screen.
MAINTENANCE / TROUBLESHOOTING
33
ENGLISH
ENG
MAINTENANCE
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
yy Make sure to turn the power off and disconnect the power cord and all other cables first.
yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall
outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
yy To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
yy To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
yy Avoid touching the screen at all times, as this may result in damage to the screen.
yy Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may result in
scratches and image distortions.
yy Do not use any chemicals as this may damage the product.
yy Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or
malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem
Solution
Cannot control the
TV with the remote
control.
yy Check the remote control sensor on the product and try again.
yy Check if there is any obstacle between the product and the remote control.
to ,
to
yy Check if the batteries are still working and properly installed (
No image display
and no sound is
produced.
yy Check if the product is turned on.
yy Check if the power cord is connected to a wall outlet.
yy Check if there is a problem in the wall outlet by connecting other products.
The TV turns off
suddenly.
yy Check the power control settings. The power supply may be interrupted.
yy Check if the Auto sleep feature is activated in the Time settings.
yy If there is no signal while the TV is on, the TV will turn off automatically after 15
minutes of inactivity.
When connecting to
the PC (RGB/HDMI
DVI), ‘No signal’ or
‘Invalid Format’ is
displayed.
yy Turn the TV off/on using the remote control.
yy Reconnect the RGB/HDMI cable.
yy Restart the PC with the TV on.
).
34 ENVIRONMENTAL INFORMATION / EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
ENVIRONMENTAL INFORMATION
(India only)
WEEE
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it means the product
is covered by the e-waste (Management and Handling) Rules, 2011.
2. All electrical and electronic products should be disposed of separately from the
municipal waste stream via designated collection facilities appointed by the government
or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative
consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact your city office, waste
disposal service or the shop where you purchased the product.
5. This product does not contain any of the hazardous substances as specified in the rule 13 (1) and (2) of
the e-waste (Management and Handling) Rules, 2011.
i;kZoj.kh; tkudkjh
WEEE
vius iqjkus midj.k dk fuiVku
ƒ. tc ;g dkVs x;s ifg;s okys fcu dk fpg+u fdlh mRikn ds lkFk layXu gksrk gS rks bldk vFkZ gS mRikn
¼izca/ku vkSj gFkkyu½ fu;e „Œƒƒ ds varxZr lfEefyr fd;k x;k gSA
„. lHkh bysfDVªdy ,oa vkSj bysDVªkfud mRiknkas dks ljdkj ;k LFkkuh; vf/kdkfj;ksa }kjk fu;qDr uxjikfydk
ls vyx izkf/kd`r dh xbZ laxzg lqfo/kkvksa ds ek/;e ls fuiVk;k tkuk pkfg,A
/kkjk …. lgh rjhds ls vius iqjkus midj.kksa dk fuiVku okrkoj.k vkSj ekuoh; LokLF; dss fy, laHkkfor udkjkRed ifj.kkeksa dks jksdus esa enn djsxkA
†. vius iqjkus midj.kksa ds fuiVku ds lac/k esa vkSj vf/kd folr`r tkudkjh ds fy,] d`i;k vius uxj dk;kZy;]
ls vkius mRikn [kjhnk Fkk] ogka laidZ djsaA
‡. bl mRikn esa
fuiVku lsok ;k tgka ¼izca/ku vkSj gFkkyu½ fu;e] „Œƒƒ ds fu;e ƒ… ¼ƒ½ vkSj ¼„½ esa funsZ’kkuqlkj dksbZ Hkh gkfudkjd inkFkZ “kkfey ugha gSA
EXTERNAL CONTROL DEVICE SETUP
To obtain the external control device setup information, please visit www.lg.com
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
(Only 50/60PM67**, 50/60PM97**)
Wireless LAN module(WN8122E) specification
Standard
IEEE802.11a/b/g/n
2400 to 2483.5 MHz
Frequency Range
5150 to 5250 MHz
5725 to 5850 MHz
Modulation
CCK / OFDM / MIMO
802.11a: 14 dBm
Output Power
(Typical)
802.11b: 17 dBm
802.11g: 15 dBm
802.11n - 2.4GHz: 13.5 dBm
802.11n - 5GHz: 12 dBm
802.11a/g: 54 Mbps
Data rate
802.11b: 11 Mbps
802.11n: 300 Mbps
Antenna Gain
(Typical)
Occupied bandwidth
2400 to 2483.5 MHz: -0.79dBi
5150 to 5250 MHz: 0.62dBi
5725 to 5850 MHz: 0.52dBi
802.11a/b/g: HT20
802.11n: HT20/40
Because band channel used by the country could be different, the user can not change or adjust the
yy
operating frequency and this product is set for the regional frequency table.
Bluetooth module (BM-LDS302) specification
Standard
Frequency Range
Output Power (Max.)
Data rate (Max.)
Communication Distance
Bluetooth Version 3.0
2400 ~ 2483.5 MHz
10 dBm or lower
3 Mbps
Line of Open Sight approx. 10 m
ENGLISH
ENG
SPECIFICATIONS
35
36 SPECIFICATIONS
ENGLISH
ENG
Product specifications may be changed without prior notice due to upgrade of product functions.
For the power supply and power consumption, refer to the label attached to the product.
42PM47**
50PM47**
42PM4700-TA
42PM4710-TD
50PM4700-TA
50PM4710-TD
With stand (mm)
983.6 x 655.0 x 246.7
1168.0 x 758.0 x 297.0
Without stand (mm)
983.6 x 601.3 x 58.0
1168.0 x 704.0 x 53.0
With stand (kg)
20.6
28.2
Without stand (kg)
19.0
25.8
MODELS
Dimensions
(W x H x D)
Weight
Power requirement
AC 100-240 V~ 50 / 60 Hz
50PM67**
MODELS
Dimensions
(W x H x D)
Weight
50PM6700-TD
50PM6700-TK
With stand (mm)
1168.0 x 758.0 x 297.0
1168.0 x 768.0 x 297.0
Without stand (mm)
1168.0 x 704.0 x 53.0
1168.0 x 704.0 x 53.0
With stand (kg)
28.8
28.1
Without stand (kg)
26.4
26.4
Power requirement
AC 100-240 V~ 50 / 60 Hz
60PM67**
MODELS
Dimensions
(W x H x D)
Weight
60PM6700-TD
60PM6700-TK
With stand (mm)
1386.8 x 883.2 x 354.7
1386.8 x 906.0 x 346.0
Without stand (mm)
1386.8 x 818.2 x 53.0
1386.8 x 818.2 x 53.0
With stand (kg)
40.6
39.8
Without stand (kg)
36.4
36.4
Power requirement
AC 100-240 V~ 50 / 60 Hz
50PM97**
60PM97**
50PM9700-TA
60PM9700-TA
With stand (mm)
1168.0 x 765.0 x 297.0
1386.8 x 897.0 x 346.0
Without stand (mm)
MODELS
Dimensions
(W x H x D)
Weight
1168.0 x 701.0 x 53.4
1386.8 x 827.2 x 53.4
With stand (kg)
28.2
40.2
Without stand (kg)
26.5
36.8
Power requirement
Environment condition
AC 100-240 V~ 50 / 60 Hz
Operating temperature
0 °C to 40 °C
Operating humidity
Less than 80 %
Storage temperature
-20 °C to 60 °C
Storage humidity
Less than 85 %
SPECIFICATIONS
Television System
Programme
Coverage
Australia
Television System
Programme
Coverage
Indonesia,
Israel, Myanmar,
Sri Lanka
Vietnam,
Malaysia
Television System
Programme
Coverage
Television System
Programme
Coverage
Iran, Algeria,
Tunisia, Digital
model
Television System
Analogue model,
India, Thailand,
South Africa, --
Television System
Programme
Coverage
Programme
Coverage
External Antenna
Impedance
Analogue TV
DVB-T
PAL/SECAM-B/G/D/K, PAL-I
UHF 21 to 69
DVB-T
VHF 06 to 12,
UHF 27 to 69
DVB-T
UHF 21 to 69
DVB-T
VHF 6 to 12,
UHF 21 to 69
DVB-T
VHF 5 to 12,
UHF 21 to 69
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
PAL B/B
B/B : VHF/UHF 0 to 75, CATV : 2 to
44
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
-
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
-
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
75 Ω
75 Ω
ENGLISH
ENG
New Zealand,
Singapore
Digital TV
37
38 SPECIFICATIONS
ENGLISH
ENG
HDMI/DVI-DTV supported mode
Component port connecting information
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency
(Hz)
720x480
31.469
31.5
59.94
60
720x576
31.25
50
1280x720
37.5
44.96
45
50
59.94
60
1920x1080
33.72
33.75
28.125
26.97
27
33.716
33.75
56.25
67.43
67.5
59.94
60
50
23.97
24
29.976
30.00
50
59.94
60
Component ports
on the TV
Y
PB
PR
Video output ports
on DVD player
Y
Y
Y
Y
PB
B-Y
Cb
Pb
PR
R-Y
Cr
Pr
Signal
Component
480i/576i
O
480p/576p
O
720p/1080i
O
1080p
O
(50 Hz / 60 Hz only)
SPECIFICATIONS
39
yyMedia contents and a player need to support HDMI 3D Frame Packing, HDMI 3D Side by Side, HDMI 3D
Top & Bottom to play in 3D.
yyVideo, which is input as HDMI,USB,DLNA, is switched into the 3D screen automatically. (This function does
not support all of the 3D video format. The specific 3D video format is not switched into the 3D screen automatically. )
yy2D->3D mode is available to watch for all signals.
yyFor models supporting WiDi, you can set the 3D mode in the same way as in RGB (PC) mode.
Input
Signal
Resolution
480p
640X480
720X480
640X480
720X480
576p
720X576
Component
USB
DLNA
DTV
31.469 / 31.5
62.5
31.25
59.94/ 60
50
59.94 / 60
50
23.97 / 24
29.97 / 30
23.976 / 24
29.97 / 30.00
50
1024X768
1360X768
67.43 / 67.5
48.363
60.015
59.94 / 60
60.004
60.015
1920X1080
67.50
60.00
1024X768
1360X768
1920X1080
48.363
60.015
67.50
37.5
45
28.125
33.75
60.004
60.015
60.00
50
60
50
60
720p
1280X720
1080i
1920X1080
1080p
RGB-PC
62.938 / 63
Vertical
Frequency (Hz)
75
89.91/90
37.5
44.96 / 45
67.432 / 67.5
56.25
62.5
33.72 / 33.75
28.125
53.946 / 54
67.432/67.5
26.973 / 27
33.716 / 33.75
56.250
HDMI-DTV
HDMI-PC
Horizontal
Frequency (kHz)
1920X1080
720p
1280X720
1080i
1920X1080
1080p
1080p
1920X1080
1920X1080
33.75
33.75
50
59.94 / 60
50
59.94 / 60
59.94 / 60
50
Playable 3D video format
Frame packing, Line alternative
Side-by-side(Full), Top-and-Bottom,
Side-by-side(Half)
Frame packing, Line alternative
Side-by-side(Full), Top-and-Bottom,
Side-by-side(Half)
Frame packing, Line alternative
Side-by-side(Full), Top-and-Bottom
Side-by-side(Half), Single Frame Sequential
Frame packing, Field alternative
Field alternative
Frame packing
Side-by-side(Full), Top-and-Bottom,
Side-by-side(Half)
Frame packing, Line alternative
Side-by-side(Full), Top-and-Bottom,
Side-by-side(Half), Checkerboard
Top-and-Bottom, Side-by-side(Half),
Checkerboard, Single Frame Sequential,
Row Interleaving, Column Interleaving
Side by Side(Half), Top & Bottom
Side by Side(Half), Top & Bottom
Side by Side(Half), Top & Bottom
Checkerboard, Single Frame Sequential
Row Interleaving, Column Interleaving
Side by Side(Half), Top & Bottom
Side by Side(Half), Top & Bottom
Side by Side(Half), Top & Bottom
Side by Side, Top & Bottom
30
Side by Side, Top & Bottom,
Checker Board, Single Frame Sequential,
Row Interleaving, Column Interleaving,
MPO(Photo), JPS(Photo)
(Photo : Side by Side(Half), Top & Bottom)
30
Side by Side, Top & Bottom,
Checker Board, Single Frame Sequential,
Row Interleaving, Column Interleaving,
MPO(Photo), JPS(Photo)
(Photo : Side by Side(Half), Top & Bottom)
Signal
Playable 3D video format
720p, 1080i
Side by Side, Top & Bottom
ENGLISH
ENG
3D supported mode
Record the model number and serial number of
the TV.
Refer to the label on the back cover and quote
this information to your dealer when requiring any
service.
MODEL
SERIAL
(Only DTV)
OWNER’S MANUAL
EXTERNAL CONTROL
DEVICE SETUP
Please read this manual carefully before operating
your set and retain it for future reference.
PM47**
PM67**
PM69**
PM97**
www.lg.com
2
IR CODES
ENGLISH
ENG
IR CODES
(Depending on model)
Code
(Hexa)
Function
Note
Code
(Hexa)
Function
Note
08
(POWER)
Remote control Button
(Power On/Off)
B0

Remote control Button
BA
yy
Remote control Button
7A
(User Guide)
Remote control Button
8F

Remote control Button
79
RATIO
Remote control Button
8E

Remote control Button
0B
INPUT
Remote control Button
BD
REC
Remote control Button
INFO
Remote control Button
F0
TV/RAD
Remote control Button
AA
10-19
Alphanumeric
buttons 0-9
Remote control Button
95
53
LIST
Remote control Button
7E
1A
Q.VIEW
Remote control Button
02
+
Remote control Button
1E
FAV
Remote control Button
00
ꕌP
Remote control Button
DC
Remote control Button
03
09
-
Remote control Button
MUTE
Remote control Button
01
Pꕍ
Remote control Button
43
SETTINGS
Remote control Button
7C
HOME
Remote control Button
42
MY APPS
Remote control Button
40
^
Remote control Button
07
<
Remote control Button
44
OK
Remote control Button
06
>
Remote control Button
41
v
Remote control Button
28
(BACK)
Remote control Button
AB
GUIDE
Remote control Button
5B
REC
EXIT
Remote control Button
72
RED
Remote control Button
71
GREEN
Remote control Button
63
YELLOW
Remote control Button
61
BLUE
Remote control Button
20
TEXT
Remote control Button
21
T.OPT
Remote control Button
45
SUBTITLE/ Q.MENU Remote control Button
B1
n LIVE TV
Remote control Button
ENERGYSAVING
Remote control Button
Remote control Button
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
EXTERNAL CONTROL DEVICE SETUP
(Depending on model)
Image shown may differ from your TV.
yy
RS-232C Setup
Connect the RS-232C (serial port) input jack to an
external control device (such as a computer or an
A/V control system) to control the product’s functions externally.
Connect the serial port of the control device to the
RS-232C jack on the product back panel.
Type of connector;
D-Sub 9-Pin Male
1
6
NOTE
yy
RS-232C on this TV is intended to be used
with third party RS-232C control hardware
and software. The instructions below are
provided to help with programming software
or to test functionality using telenet software.
yy
RS-232C connection cables are not supplied
with the product.
AV IN
COMPONENT
IN
VIDEO
No.
1
2
3
4
5
6
7
8
9
L/MONO AUDIO R
2
Y
PB
PR
L
R
1
VIDEO
AUDIO
LAN
3
5
9
Pin name
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connection
4
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
RS-232C Configurations
Set ID
Set ID number. "Real Data Mapping" (See p.9)
7-Wire Configurations (Standard RS-232C cable)
RXD TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
8
7
D-Sub 9
D-Sub 9
TXD
RXD
GND
DSR
DTR
CTS
RTS
RXD TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
7
8
D-Sub 9
D-Sub 9
2 Press the Navigation buttons to scroll to
SETUP and press OK.
3 Press the Navigation buttons to scroll to
OPTION and press OK.
4 Press the Navigation buttons to scroll to Set ID
and press OK.
5 Scroll left or right to select a set ID number and
select Close. The adjustment range is 1 to 99.
6 When you are finished, press EXIT.
3-Wire Configurations(Not standard)
1 Press Home to access the Home menus.
TXD
RXD
GND
DTR
DSR
RTS
CTS
EXTERNAL CONTROL DEVICE SETUP
5
yy
Baud rate: 9600 bps (UART)
yy
Data length: 8 bits
yy
Parity : None
ENGLISH
ENG
Communication Parameters
yy
Stop bit: 1 bit
yy
Communication code: ASCII code
yy
Use a crossed (reverse) cable.
Command reference list
COMMAND1
COMMAND2
DATA
(Hexadecimal)
COMMAND1
COMMAND2
DATA
(Hexadecimal)
01. Power
k
a
00 to 01
14. Colour
Temperature
x
u
00 to 64
02. Aspect
Ratio
k
c
(See p.6)
15. ISM
Method
j
q
00 to 05
03. Screen
Mute
k
d
(See p.6)
16. Energy
Saving
j
q
00 to 05
04. Volume
Mute
k
e
00 to 01
17. Auto
Configuration
j
u
01
05. Volume
Control
k
f
00 to 64
18. Tune
Command
m
a
(See p.8)
06. Contrast
k
g
00 to 64
19. Programme
m
Add/Skip
b
00 to 01
07. Brightness
k
h
00 to 64
20. Key
c
Key Code
b
(See p.9)
m
08. Colour
k
i
00 to 64
21. Input select x
(Main)
09. Tint
k
j
00 to 64
22. 3D
x
(Only 3D models)
t
(See p.9)
10. Sharpness
k
k
00 to 32
23. Extended 3D x
(Only 3D models)
v
(See p.10)
11. OSD Select k
l
00 to 01
12. Remote
k
Control Lock Mode
m
00 to 01
13. Balance
t
00 to 64
k
yy
Note : During USB operations such as DivX or EMF, all commands except Power(ka) and Key(mc)
are not executed and treated as NG.
6
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
Transmission / Receiving
Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] First command to control the
TV.(j, k, m or x)
[Command 2] Second command to control the
TV.
[Set ID]
You can adjust the set ID to
choose desired monitor ID number in option menu. Adjustment
range is 1 to 99. When selecting Set ID ‘0’, every connected set is controlled. Set ID is indicated as decimal (1
to 99) on menu and as Hexa decimal (0x0 to 0x63) on transmission/receiving protocol.
[DATA]
To transmit command data.
Transmit ‘FF’ data to read status
of command.
[Cr]
Carriage Return
ASCII code ‘0x0D’
[ ]
ASCII code ‘space (0x20)’
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The set transmits ACK (acknowledgement)
based on this format when receiving normal
data. At this time, if the data is data read mode,
it indicates present status data. If the data is
data write mode, it returns the data of the PC
01. Power (Command: k a)
►► To control Power On/Off of the set.
Transmission[k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off
01 : Power On
Ack [a][ ][Set ID][ ][OK/NG][Data][x]
►► To show Power On/Off.
Transmission [k][a][ ][Set ID][ ][FF][Cr]
Ack [a][ ][Set ID][ ][OK/NG][Data][x]
* Similarly, if other functions transmit ‘0xFF’ data based
on this format, Acknowledgement data feed back
presents status about each function.
* OK Ack., Error Ack. and other message may display
on the screen when TV is power On.
02. Aspect Ratio (Command: k c) (Main Picture Size)
►► To adjust the screen format. (Main picture format)
You can also adjust the screen format using the
Aspect Ratio in the Q.MENU. or PICTURE menu.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data
01 :
02 :
04 :
06 :
07 :
09 :
0B :
10 to
Normal screen (4:3)
Wide screen (16:9)
Zoom
Original
14:9
Just Scan
Full Wide
1F : Cinema Zoom 1 to 16
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
* In DTV/HDMI (1080i 50 Hz / 60 Hz, 720p 50Hz / 60
Hz, 1080p 24 Hz / 30 Hz / 50 Hz / 60 Hz),
Component( 720p, 1080i, 1080p 50 Hz / 60 Hz) mode,
Just Scan is available.
* Full Wide is supported only for DTV.
computer.
03. Screen Mute (Command: k d)
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* The set transmits ACK (acknowledgement)
based on this format when receiving abnormal
data from
non-viable functions or communication errors.
Data00: Illegal Code
►► To select screen mute on/off.
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data 00 : Screen mute off (Picture on)
Video mute off
01 : Screen mute on (Picture off)
10 : Video mute on
Ack [d][ ][Set ID][ ][OK/NG][Data][x]
* In case of video mute on only, TV will display On
Screen Display(OSD). But, in case of Screen mute
on, TV will not display OSD.
EXTERNAL CONTROL DEVICE SETUP
►► To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 00 : Volume mute on (Volume off)
01 : Volume mute off (Volume on)
Ack [e][ ][Set ID][ ][OK/NG][Data][x]
05. Volume Control (Command: k f)
►► To adjust volume.
You can also adjust volume with the VOLUME buttons on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
09. Tint (Command: k j)
►► To adjust the screen tint.
You can also adjust tint in the PICTURE menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red : 00 to Green : 64
* Refer to ‘Real data mapping’. (See p.9)
Ack [j][ ][Set ID][ ][OK/NG][Data][x]
10. Sharpness (Command: k k)
►► To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping’. (See p.9)
Data Min : 00 to Max : 32
* Refer to ‘Real data mapping’. (See p.9)
Ack [f][ ][Set ID][ ][OK/NG][Data][x]
Ack [k][ ][Set ID][ ][OK/NG][Data][x]
06. Contrast (Command: k g)
►► To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping’. (See p.9)
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
11. OSD Select (Command: k l)
►► To select OSD (On Screen Display) on/off when controlling
remotely.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data00 : OSD off
01 : OSD on
Ack [l][ ][Set ID][ ][OK/NG][Data][x]
07. Brightness (Command: k h)
►► To adjust screen brightness.
You can also adjust brightness in the PICTURE
menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping’. (See p.9)
Ack [h][ ][Set ID][ ][OK/NG][Data][x]
12. Remote control lock mode (Command: k m)
►► To lock the front panel controls on the monitor and remote
control.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
08. Colour (Command: k i)
►► To adjust the screen colour.
You can also adjust colour in the PICTURE menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping’. (See p.9)
Ack [i][ ][Set ID][ ][OK/NG][Data][x]
Data 00 : Lock off
01 : Lock on
Ack [m][ ][Set ID][ ][OK/NG][Data][x]
* If you are not using the remote control, use this mode.
When main power is on/off, external control lock is
released.
* In the standby mode, if key lock is on, TV will not turn
on by power on key of IR & Local Key.
ENGLISH
ENG
04. Volume Mute (Command: k e)
7
8
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
13. Balance (Command: k t)
17. Auto Configure(Command: j u)
►► To adjust balance.
You can also adjust balance in the AUDIO menu.
►► To adjust picture position and minimize image shaking
automatically. It works only in RGB (PC) mode.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping’. (See p.9)
Ack [t][ ][Set ID][ ][OK/NG][Data][x]
Transmission [j][u][ ][Set ID][ ][Data][Cr]
Data 01: To set
Ack [u][ ][Set ID][ ][OK/NG][Data][x]
14. Colour Temperature (Command: x u)
18. Tune Command (Command: m a)
►► To adjust colour temperature. You can also adjust Colour
Temperature in the PICTURE menu.
►► Select channel to following physical number.
Transmission [x][u][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping’. (See p.9)
Ack [u][ ][Set ID][ ][OK/NG][Data][x]
15. ISM Method (Command: j p)
►► To control the ISM method. You can also adjust ISM
Method in OPTION menu.
Transmission [j][p][ ][Set ID][ ][Data][Cr]
Transmission [m][a][ ][Set ID][ ][Data00][ ][Data01][ ][Data02][Cr]
Data00 : High channel data
Data01 : Low channel data
ex. No. 47 -> 00 2F (2FH)
No. 394 -> 01 8A (18AH),
DTV No. 0 -> Don’t care
Data02 : 0x00 : Analogue Main
0x10 : DTV Main
0x20 : Radio
Channel data range
Analogue - Min: 00 to Max: C7 (0 to 199)
Digital - Min: 00 to Max: 3E7 (0 to 999)
Ack [a][ ][Set ID][ ][OK/NG][Data][x]
Data Min: 00 to Max: 7DH
Data 02: Orbiter
08: Normal
20: Colour Wash
Ack [p][ ][Set ID][ ][OK/NG][Data][x]
19. Programme Add/Skip(Command: m b)
►► To set skip status for the current Programme.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data00 : Skip
16. Energy Saving (Command: j q)
01 : Add
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
►► To reduce the power consumption of the TV. You can also
adjust Energy Saving in PICTURE menu.
Transmission [j][q][ ][Set ID][ ][Data][Cr]
Data
00:
01:
02:
03:
04:
05:
Off
Minimum
Medium
Maximum
Intelligent Sensor
Screen off
Ack [q][ ][Set ID][ ][OK/NG][Data][x]
20. Key(Command: m c)
►► To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Data Key code (See p.2)
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
EXTERNAL CONTROL DEVICE SETUP
9
►► To change 3D mode for TV.
►► To select input source for main picture.
(Use the feature depending on your model.)
Transmission [x][t][ ][Set ID][ ][Data01][ ][Data02][ ]
[Data03][ ][Data04][Cr]
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data Structure
MSB
0
LSB
0
0
0
External Input
Input
0
0
1
0
1
1
0
0
1
0
0
0
Input Number
0
0
0
0
0
0
1
1
1
External
0
0
0
1
1
1
0
0
0
0
0
0
0
Input Number
0
0
0
0
0
1
0
1
0
0
1
1
0
1
0
0
0
1
0
1
0
Data
DTV
Analogue
AV
Component
RGB
00 :
Step 0
A:
Step 10 (Set ID 10)
0
Data02 00 : Top and Bottom
01 : Side by Side
02 : Check Board
03 : Single Frame Sequential
04 : Column interleaving
05 : Row interleaving
Data03 00 : Right to Left
01 : Left to Right
HDMI
Data04 3D Effect(3D Depth) : 0~20
Data
Input1
Input2
Input3
Input4
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
* Real data mapping
Data01 00 : 3D On
01 : 3D Off
02 : 3D to 2D
03 : 2D to 3D
*If data01 is 01(3D off), data02, data03 and data04
have no meaning.
*If data01 is 02(3D to 2D), data02, data03 and data04
have no meaning.
*If data01 is 03(2D to 3D), data02 and data03 have no
meaning.
Data 01
00
01
02
03
Data 02
O
X
X
X
Data 03
O
X
X
X
Data 04
X
X
X
O
X : Don't care
Ack : All data must be consist of 2 characters.
F:
Step 15 (Set ID 15)
[t][ ][OK] [Data01][ ][Data02][ ][Data03][ ][Data04] [x]
10 :
Step 16 (Set ID 16)
[t][ ][NG] [Data01] [x]
64 :
Step 100
6E : Step 110
73 :
Step 115
74 :
Step 116
CF : Step 199
FE : Step 254
FF : Step 255
ENGLISH
ENG
22. 3D (Command: x t) (Only 3D models)
21. Input select (Command: x b)
(Main Picture Input)
10
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
23. Extended 3D(Command: x v) (Only 3D models)
►► To change 3D mode for TV.
Transmission [x][v][ ][Set ID][ ][Data01][ ][Data02] [Cr]
Data01 : 3D option item that user wants to adjust
Data
00
01
02
07
08
09
3D Option
3D Picture Correction
3D Depth
3D Viewpoint
3D Sound Zooming
Normal Image View
3D Mode
Data02 : It has own range for each 3D option determined by Data01.
1) When Data 01 is 00
Data
00
01
3D Picture Correction
Right to Left
Left to Right
2) When Data 01 is 01
Data Min: 00 ~ Max: 14
3) When Data 01 is 02
Data Min: 00 ~ Max: 14
4) When Data01 is 07
Data
00
01
3D Sound Zooming
Off
On
5) When Data01 is 08
Data
00
01
Normal Image View
Off
On
6) When Data01 is 09
Data
00
01
02
03
04
3D Mode
Standard
Sports
Cinema
Extreme
Manual
(* transmit by Hexadecimal code)
Ack : All data must be consist of 2 characters.
[v][ ][OK] [Data01][ ][Data02] [x][v][ ][NG] [Data01] [x]
* Use the feature depending on your model.
Download PDF

advertising