LG | 50PS80ED | LG 50PS80ED Owner’s Manual

PLASMA TV
OWNER’S MANUAL
PLASMA TV MODELS
5 0 P S 8* * *
6 0 P S 8* * *
Please read this manual carefully before operating
your TV.
Retain it for future reference.
Record model number and serial number of the TV.
Refer to the label on the back cover and quote this
information.
To your dealer when requiring service.
DVB is a registered trademark
of the DVB Project
I D N u m b e r ( s ) : 6248: 50PS80ED-AA
This product qualifies for ENERGY STAR in the “factory default
(Home Use mode)” setting and this is the setting in which
power savings will be achieved.
Changing the factory default picture setting or enabling other
features will increase power consumption that could exceed the
limits necessary to qualify for Energy Star rating.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
ACCESSORIES
A
Image shown may differ from your TV.
POWER
❁❂✰
Q. MENU
INPUT
TV/RAD
MENU
GUIDE
TIME
SHIFT
Time Machine
TIME
SHIFT
OK
RETURN
EXIT
RECORD
MARK
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the
dealer where you purchased the product.
STOP
LIVE
FAV
CHAR/NUM
P
P
A
G
E
MUTE
DELETE
Owner’s Manual
Batteries
LIST
Q.VIEW
REPEAT
RATIO
AV MODE
ENERGY SAVING
Remote Control
This item is not included for all models.
Power Cord
Ferrite Core
(This item is not included
for all models.)
* Lightly wipe any stains or fingerprints on the
surface of the TV with the polishing cloth.
Polishing Cloth
Polishing cloth for use on
the screen.
Do not use excessive force. This may cause
scratching or discolouration.
x4
x2
Cable management clip
(Refer to p.8)
Wall Mounting Bracket
(Separate purchase)
AW-50PG60MS
Cable Holder
(Refer to p.8)
Protection cover
(Refer to p.9)
Bolts for stand assembly
(Refer to P. 6)
(Only 60PS8***)
AW-60PG60MS
Use of ferrite core (This feature is not available for all models.)
Ferrite core can be used to reduce the electromagnetic
wave when connecting the power cord.
The closer the location of the ferrite core to the power
plug, the better it is.
Install the power plug closely.
1
CONTENTS
ACCESSORIES
.............................................
1
PREPARATION
CONTENTS
Front Panel Controls..................................................... 4
Back Panel Information ................................................ 5
Stand installation .......................................................... 6
Careful installation advice ........................................... 7
Back Cover for Wire Arrangement..............................8
Swivel Stand......................................................................9
Not using the desk-type stand ...................................9
Desktop Pedestal Installation ....................................10
Wall Mount: Horizontal installation .........................10
ANTENNA CONNECTION ........................................11
EXTERNAL EQUIPMENT SETUP
Hd receiver setup..........................................................12
DVD SETUP ....................................................................14
VCR SETUP.....................................................................16
AV output setup ...........................................................18
Other A/V Source Setup ............................................18
Digital audio out SETUP.............................................19
USB in setup .................................................................19
PC Setup.........................................................................20
Screen Setup for PC mode .....................................22
Booster............................................................................39
Software Update...........................................................40
Diagnostics.....................................................................42
Selecting the programme table ................................43
Favourite programme setup .......................................44
Brief Information...........................................................45
Input List.........................................................................46
SIMPLINK........................................................................47
Input Label .....................................................................50
AV Mode .........................................................................51
Simple Manual ...............................................................51
Initialising (Reset to original factory settings)....52
EPG (ELECTRONIC PROGRAMME
GUIDE)(IN DIGITAL MODE)
EPG (Electronic Programme Guide)
(in digital mode) ...........................................................53
Button Function in NOW/NEXT Guide Mode...54
Button Function in 8Day Guide Mode ................54
Button Function in Date Change Mode...............55
Button Function in Detailed Information Menu.55
Button Function in Schedule List Mode ..............55
DVR
WATCHING TV / PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS ................26
Turning on the TV ........................................................28
Programme Selection...................................................28
Volume Adjustment......................................................28
Quick Menu....................................................................29
On-Screen Menus Selection and adjustment.......30
Auto programme Tuning ............................................32
Manual programme Tuning
(In Digital Mode)..........................................................33
Manual programme Tuning
(In Analogue Mode) ....................................................34
Programme Edit ...........................................................36
2
Time MACHINE (Pause & Replay of Live TV) ......56
RECORDING..................................................................59
SCHEDULE list ..............................................................63
Recording Quality.........................................................64
Time machine initialisation.........................................65
To use the internal hard disk.....................................66
USB...................................................................................67
Recorded list..................................................................70
Photo list.........................................................................73
Music list.........................................................................77
MOVIE list ......................................................................80
Divx Resgistration Code .............................................85
Deactivation...................................................................86
Picture Size (Aspect Ratio) Control........................87
Picture Wizard ...............................................................89
Energy Saving ...............................................................91
Preset picture settings
Picture Mode-Preset .................................................92
Manual Picture Adjustment
Picture Mode-User option ......................................93
Picture Improvement Technology ............................94
Expert Picture control .................................................95
Picture Reset..................................................................98
Image Sticking Minimization (ISM) Method .........99
Demo Mode.................................................................100
Mode Setting ...............................................................101
SOUND & LANGUAGE CONTROL
Auto volume leveller (auto volume) ......................102
Clear Voice II................................................................103
Preset Sound Settings (Sound mode)..................104
Sound Setting Adjustment - User Mode .............105
SRS TruSurround XT .................................................105
Balance..........................................................................106
TV Speakers On/Off Setup .....................................107
Selecting digital audio out.......................................108
Audio Reset..................................................................109
Stereo Reception (In Analogue Mode Only) ......110
Speaker Sound Output Selection...........................110
Language Selection (In digital mode only) ..........111
PARENTAL CONTROL / RATINGS
Set Password & Lock System
Setting up Your Password.......................................114
Lock System ...............................................................115
Set Password..............................................................116
Block Programme.........................................................117
Parental Guidance .......................................................118
Input Block....................................................................119
key Lock ........................................................................120
CONTENTS
PICTURE CONTROL
TELETEXT
Switch on/off ..............................................................121
SIMPLE Text..................................................................121
TOP Text........................................................................121
FASTEXT .......................................................................122
Special Teletext Functions........................................122
APPENDIX
Troubleshooting ..........................................................123
Maintenance.................................................................125
Product Specifications ..............................................126
Programming the Remote control..........................127
IR Codes........................................................................128
External Control Through rs-232c ........................130
TIME SETTING
Clock Setup ..................................................................112
Auto On/Off Time Setting........................................113
Sleep Timer setting.....................................................113
3
PREPARATION
FRONT PANEL CONTROLS
! NOTE
G TV
PREPARATION
can be placed in standby mode in order to reduce the power consumption. And the TV should be
switched off using the power switch on the TV if it will not be watched for some time, as this will reduce
energy consumption.
The energy consumed during use can be significantly reduced if the level of brightness of the picture is
reduced, and this will also reduce the overall running cost.
■
Image shown may differ from your TV.
CAUTION
When the TV cannot be turned on with the remote control, press the main power button on the TV.
(When the power is turned off with the main power button on the TV, it will not be turned on with the
remote control).
G Do not step on the glass stand or subject it to any impact.
It may break, causing possible injury from fragments of glass, or the TV may fall.
G Do not drag the TV. The floor or the product may be damaged.
G
P
PROGRAMME
P
VOLUME
Intelligent Sensor
Adjusts picture according
to the surrounding conditions.
Remote Control
Sensor
OK
OK
MENU
MENU
INPUT
INPUT
POWER
Power/Standby Indicator
• Illuminates red in standby mode.
• The LED is off while the TV remains on.
4
BACK PANEL INFORMATION
USB IN
Image shown may differ from your TV.
PREPARATION
USB IN
Used for viewing photos and
listening to MP3.
4
A
9
1
R -AUDIO-L
2
3
4
5
6
7
VIDEO
PB
PR
VIDEO
ANTENNA
IN
2
2
R
R -AUDIO-L
AUDIO
L
VIDEO
COMPONENT IN
Y
AUDIO IN
(RGB/DVI)
R -AUDIO-L
1
RS-232C IN
2
(CONTROL & SERVICE)
3
OPTICAL
DIGITAL
AUDIO OUT
- AUDIO - (MONO) VIDEO
RGB IN(PC)
USB IN
2
USB IN
VIDEO
2
IN1
OUT
9
10
1
2
AV
8
1
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
2
HDMI Input
Connect an HDMI signal to HDMI IN.
Or DVI(VIDEO)signal to HDMI/DVI port with DVI
to HDMI cable.
3
4
5
RGB Input
Connect the output from a PC.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio from various types of
equipment.
Note: In standby mode, these ports do not work.
RGB/DVI Audio Input
Connect the audio from a PC.
6
Component Input
Connect a component video/audio device to
these jacks.
7
Antenna Input
Connect RF antenna to this jack.
8
RS-232C Input (CONTROL&SERVICE) Port
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
9
Audio/Video Input (AV IN1/2)
Connect audio/video output from an external
device to these jacks.
10
AV Output
Connect second TV or monitor to the AV OUT
socket on the TV.
5
PREPARATION
STAND INSTALLATION
■
PREPARATION
Image shown may differ from your TV
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the
product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt
can deviate from abrasion of the tightening part of the bolt.
1
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
2
Assemble the TV as shown.
3
Fix the 4 bolts securely using the holes in the
back of the TV.
When assembling the stand, make sure to distinguish and assemble the front
and rear side of the stand correctly.
Front
6
CAREFUL INSTALLATION ADVICE
You should purchase necessary components to fix the TV safety and secure to the wall from the market.
Position the TV close to the wall to avoid the possibility of it falling when pushed.
A The instructions shown below are a safer way to set up the TV, by fixing it to the wall, avoiding the possibility
of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will
also prevent the TV from damage. Ensure that children do not climb or hang from the TV.
A
A
2
PREPARATION
1
1
2
1
Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen then bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
2
Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the
wall.
3
3
Use a sturdy rope to tie the product for alignment. It is safer to tie the rope so it becomes horizontal between the wall and the product.
! NOTE
G
G
G
When moving the TV undo the cords first.
Use a platform or cabinet strong and large enough to support the size and weight of the TV.
To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.
7
PREPARATION
BACK COVER FOR WIRE ARRANGEMENT
■
Image shown may differ from your TV.
PREPARATION
After Connecting the cables as necessary, install
CABLE HOLDER as shown and bundle the
cables.
CABLE HOLDER
After Connecting the cables as necessary, install
CABLE HOLDER as shown and bundle the cables.
To connect additional equipment, see the
E x t e r n a l e q u i p m e n t S e t u p section.
1
2
Install the C A B L E M A N A G E M E N T C L I P as shown.
CABLE HOLDER
How to remove the cable management clip
Hold the C A B L E M A N A G E M E N T C L I P with both hands and pull it upward.
! NOTE
G
8
Do not use the CABLE MANAGEMENT CLIP to lift the TV.
- If the TV is dropped, you may be injured or the TV may be damaged.
CABLE MANAGEMENT CLIP
SWIVEL STAND
This feature is not available for all models.
PREPARATION
After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to
suit your viewing position.
NOT USING THE DESK-TYPE STAND
■
Here shown may differ from your TV.
When installing the wall-mounted unit, use the protection cover. Insert the P R O T E C T I O N C O V E R into the TV
until clicking sound.
Protection cover
EARTHING
Ensure that you connect the earth wire to prevent possible
electric shock. If grounding methods are not possible, have a
qualified electrician install a separate circuit breaker.
Do not try to earth the TV by connecting it to telephone
wires, lightening rods or gas pipes.
Power Supply
Circuit breaker
9
PREPARATION
A
A
The TV can be installed in various ways such as on a wall, or on a desktop etc.
The TV is designed to be mounted horizontally.
DESKTOP PEDESTAL INSTALLATION
For adequate ventilation allow a clearance of 4” (10cm) all around the TV.
PREPARATION
4 inches
4 inches
4 inches
4 inches
WALL MOUNT: HORIZONTAL INSTALLATION
A
We recommend the use of a LG Brand wall mounting
bracket when mounting the TV to a wall.
We recommend that you purchase a wall mounting
bracket which supports VESA standard.
A LG recommends that wall mounting be performed
by a qualified professional installer.
4 inches
A
4 inches
4 inches
4 inches
4 inches
! NOTE
G
Should Install wall mount on a solid wall perpendicular to the floor.
Should use a special wall mount, if you want to
install it to ceiling or slanted wall.
G The surface that wall mount is to be mounted
on should be of sufficient strength to support
the weight of TV set; e.g. concrete, natural rock,
brick and hollow block.
G Installing screw type and length depends on the
wall mount used. Further information, refer to
the instructions included with the mount.
G LG is not liable for any accidents or damage to
property or TV due to incorrect installation:
- Where a non-compliant VESA wall mount is
used.
- Incorrect fastening of screws to surface which
may cause TV to fall and cause personal injury.
- Not following the recommended Installation
method.
G
10
A
B
Model
50PS8***
60PS8***
VESA Standard
(A * B)
Screw Quantity
400 * 400 M6
4
600 * 400 M8
4
■
To prevent damage do not connect to the mains outlet until all connections are made between the devices.
ANTENNA CONNECTION
For optimum picture quality, adjust antenna direction.
An antenna cable and converter are not supplied.
VARIABLE AUDIO OUT
)
ANTENNA
IN
RF Coaxial Wire (75 ohm)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
)
UHF
Antenna
Signal
Amplifier
VARIABLE AUDIO OUT
Outdoor
Antenna
(VHF, UHF)
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
(
Wall
Antenna
Socket
PREPARATION
■
(
■
ANTENNA
IN
VHF
■
■
In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the
antenna as shown above.
If signal needs to be split for two TVs,use an antenna signal splitter for connection.
11
EXTERNAL EQUIPMENT SETUP
■
To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.
■
Image shown may differ from your TV.
HD RECEIVER SETUP
■
This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive
Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.
1
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
4
Select C o m p o n e n t 1 input source using the I N P U T
button on the remote control.
If connected to C O M P O N E N T I N 2 input, select
C o m p o n e n t 2 input source.
Signal
Component
HDMI
480i/576i
O
X
480p/576p
O
O
720p/1080i
O
O
1080p
O
O
(50/60Hz only)
(24Hz/30Hz/50Hz/60Hz)
R
2
1
2
12
AUDIO
3
VIDEO
PB
Connect the audio output of the digital set-top box to
the C O M P O N E N T I N A U D I O jacks on the TV.
PR
2
2
COMPONENT IN
Connect the video outputs (Y, PB, PR) of the digital set
top box to the C O M P O N E N T I N V I D E O jacks on the
TV.
Y
1
L
EXTERNAL EQUIPMENT SETUP
Connecting with a component cables
VIDEO
)
(
R -AUDIO-L
(
1
! NOTE
G Check
that your HDMI cable is version 1.3 or higher.
If the HDMI cables don’t support HDMI version 1.3,
flickering or no screen display can result. Please use the
latest cables that support at least HDMI version 1.3.
Turn on the digital set-top box. (Refer to the owner’s
manual for the digital set-top box.)
4
Select H D M I 1 input source using the I N P U T button
on the remote control.
VIDEO
VIDEO
IN1
1
OUT
2
VIDEO
3
R -AUDIO-L
2
)
1
Connect the audio output of the digital set-top box to
the A U D I O I N ( R G B / D V I ) jack on the TV.
AUDIO IN
(RGB/DVI)
(
2
OPTICAL
DIGITAL
AUDIO OUT
- AUDIO - (Mono)
3
(CONTROL & SERVICE)
Connect the digital set-top box to H D M I / D V I I N 1
jack on the TV.
RS-232C IN
1
RGB IN(PC)
Connecting with an HDMI to DVI cable
R -AUDIO-L
Select H D M I 1, H D M I 2, H D M I 3 or H D M I 4 input
source using the I N P U T button on the remote control.
R -AUDIO-L
3
1
)
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
VIDEO
2
2
(CONTROL & SERVICE)
3
EXTERNAL EQUIPMENT SETUP
Connect the digital set-top box to H D M I / D V I I N 1,
H D M I I N 2, H D M I I N 3 or H D M I I N 4 jack on the
TV.
RS-232C IN
1
RGB I
Connecting a set-top box with an HDMI cable
13
EXTERNAL EQUIPMENT SETUP
DVD SETUP
2
Connect the audio outputs of the DVD to the
C O M P O N E N T I N A U D I O jacks on the TV.
3
Turn on the DVD player, insert a DVD.
4
Select C o m p o n e n t 1 input source using the I N P U T
button on the remote control.
If connected to C O M P O N E N T I N 2 input, select
C o m p o n e n t 2 input source.
5
Refer to the DVD player's manual for operating
instructions.
PR
PB
VIDEO
Y
Connect the video outputs (Y, PB, PR) of the DVD to the
C O M P O N E N T I N V I D E O jacks on the TV.
2
AUDIO
L
1
R
EXTERNAL EQUIPMENT SETUP
1
1
2
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV
Video output ports
on DVD player
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
2
14
COMPONENT IN
Connecting with a component cables
Connecting the HDMI cable
2
3
Connect the HDMI output of the DVD to the
H D M I / D V I I N 1, H D M I I N 2, H D M I I N 3 or H D M I
I N 4 jack on the TV.
Select H D M I 1, H D M I 2, H D M I 3 or H D M I 4 input
source using the I N P U T button on the remote control.
3
2
1
Refer to the DVD player's manual for operating
instructions.
1
! NOTE
EXTERNAL EQUIPMENT SETUP
1
G The
TV can receive video and audio signals simultaneously
when using a HDMI cable.
G If the DVD does not support Auto HDMI, you must set the
output resolution appropriately.
G Check that your HDMI cable is version 1.3 or higher.
If the HDMI cables don’t support HDMI version 1.3, flickering or no screen display can result. Please use the latest
cables that support at least HDMI version 1.3.
15
EXTERNAL EQUIPMENT SETUP
VCR SETUP
■
To avoid picture noise (interference), allow adequate distance between the VCR and TV.
ANT OUT
S-VIDEO
ANT IN
OUTPUT
SWITCH
VIDEO
L
R
1
R -AUDIO-L
)
VIDEO
ANTENNA
IN
(
EXTERNAL EQUIPMENT SETUP
Connecting with a RF Cable
2
Wall Jack
Antenna
2
16
1
Connect the A N T O U T socket of the VCR to the A N T E N N A I N socket on the TV.
2
Connect the antenna cable to the A N T I N socket of the VCR.
3
Press the P L A Y button on the VCR and match the appropriate channel between the TV and VCR for
viewing.
Connecting with an RCA cable
2
3
V I D E O jacks between TV and
Connect the A U D I O/V
VCR. Match the jack colours (Video = yellow, Audio Left
= white, and Audio Right = red)
Insert a video tape into the VCR and press PLAY on
the VCR. (Refer to the VCR owner’s manual.)
Select A V 2 input source using the I N P U T button on
the remote control.
If connected to A V I N 1 input, select A V 1 input
source.
1
2
S-VIDEO
VIDEO
OUTPUT
SWITCH
L
R
ANT IN
ANT OUT
EXTERNAL EQUIPMENT SETUP
1
! NOTE
G If
you have a mono VCR, connect the audio cable from the
VCR to the A U D I O L / M O N O jack of the TV.
17
EXTERNAL EQUIPMENT SETUP
PR
ANTENNA
IN
2
1
R
R -AUDIO-L
OUT
1
Connect the second TV or monitor to the TV’s AV OUT
jacks.
AUDIO
L
)
(
EXTERNAL EQUIPMENT SETUP
VIDEO
The TV has a special signal output capability which allows you
to hook up the second TV or monitor.
CO
AV OUTPUT SETUP (Only Analogue Mode)
1
2
See the Operating Manual of the second TV or monitor
for further details regarding that device’s input settings.
S-VIDEO
! NOTE
VIDEO
L
R
G Only
Analog Channel and AV can be used for AV out.
Component, RGB, HDMI input sources cannot be used for
AV out.
G We recommend to use the AV OUT jacks for VCR recording.
OTHER A/V SOURCE SETUP
Operate the corresponding external equipment.
Refer to external equipment operating guide.
R -AUDIO-L
3
VIDEO
AV IN 2
18
L
4 USB IN
Select A V 2 input source using the I N P U T button
on the remote control.
If connected to A V I N 1, select A V 1 input
source.
VIDEO L/MONO AUDIO R
2
Video Game Set
(
1
)
Camcorder
V I D E O jacks between TV
Connect the A U D I O/V
and external equipment. Match the jack colours.
(Video = yellow, Audio Left = white, and Audio Right
= red)
1
R
DIGITAL AUDIO OUT SETUP
Y
VIDEO
PB
PR
L
VIDEO
R
R -AUDIO-L
Set the “TV Speaker option - Off ” in the AUDIO
menu.(Gp. 106). Refer to the external audio equipment
instruction manual for operation.
VIDEO
3
AUDIO IN
(RGB/DVI)
- AUDIO - (Mono)
Connect the other end of the optical cable to the
digital audio (optical) input on the audio equipment.
OPTICAL
DIGITAL
AUDIO OUT
(CONTROL & SERVICE)
2
RS-232C IN
Connect one end of an optical cable to the TV Digital
Audio (Optical) Output port.
IN1
OUT
1
2
1
CAUTION
G Do
not look into the optical output port. Looking at the
laser beam may damage your vision.
EXTERNAL EQUIPMENT SETUP
1
RGB IN(PC)
Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port.
If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL
AUDIO OUT terminal on the back of TV to a DVD Home Theatre (or amp).
! NOTE
GWhen
connecting with external audio equipments, such as
amplifiers or speakers, please turn the TV speakers off.
USB IN SETUP
USB IN
Here shown may differ from your TV.
1
R
■
1
Connect the USB device to the U S B I N jacks on the side of TV.
2
After connecting the U S B I N jacks, you can use the U S B function. (G p .67)
CAUTION
G Before
removing the USB device, please use the Remove USB Device in Quick Menu to prevent software,
data loss or damage to USB HDD.
19
EXTERNAL EQUIPMENT SETUP
PC SETUP
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
3
Turn on the PC and the TV
4
Select R G B input source using the INPUT button on
the remote control.
VIDEO
VIDEO
R -AUDIO-L
- AUDIO - (Mono)
(CONTROL & SERVICE)
VIDEO
1
RS-232C IN
2
R -AUDIO-L
Connect the PC audio output to the A U D I O I N
( R G B / D V I ) jack on the TV.
3
)
IN1
1
2
AUDIO
RGB OUTPUT
AV OUT
VIDEO
L
3
Turn on the PC and the TV.
PB
L
R
Connect the PC audio output to the A U D I O I N
( R G B / D V I ) jack on the TV.
R
AUDIO
R
2
AUDIO IN
(RGB/DVI)
VIDEO
RGB IN(PC)
L
AUDIO
Connect the DVI output of the PC to the H D M I / D V I
I N 1 jack on the TV.
(CONTROL & SERVICE)
R
VIDEO
L/MONO
1
OPTICAL
DIGITAL
AUDIO OUT
R -AUDIO-L
AUDIO
R
AUDIO
VIDEO
AV OUT
RS-232C IN
L/MONO
AV IN 1
VIDEO
VIDEO
Connecting with a HDMI to DVI cable
- AUDIO - (Mono)
AV IN 1
IN1
OUT
2
1
4
Select H D M I 1 input source using the INPUT button
on the remote control.
DVI-PC OUTPUT
20
OUT
PR
2
Connect the RGB output of the PC to the R G B I N
( P C ) jack on the TV.
AUDIO IN
(RGB/DVI)
(
EXTERNAL EQUIPMENT SETUP
1
RGB IN(PC)
Connecting with a D-sub 15 pin cable
OPTICAL
DIGITAL
AUDIO OUT
AUDIO
1
2
Supported Display Resolution
HDMI/DVI-DTV mode
RGB-PC, HDMI/DVI-PC mode
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
720x400
31.468
70.08
640x480
31.649
59.94
640x480
31.469
59.94
31.469
60
800x600
37.879
60.31
31.47
59.94
1024x768
48.363
60.00
720x480
720x576
31.50
60
31.25
50.00
37.50
50.00
44.96
59.94
1280x768
47.776
59.87
1360x768
47.712
60.015
1280x1024
63.98
60.02
1400x1050
65.317
59.979
45.00
60
59.934
28.125
50.00
33.72
59.94
33.75
60
1920x1080
66.587
1280x720
1920x1080
27.00
24.00
33.75
30
56.25
50.00
67.433
59.94
67.50
60
EXTERNAL EQUIPMENT SETUP
Resolution
! NOTE
G Avoid
keeping a fixed image on the set’s screen
for prolonged periods of time. The fixed image
may become permanently imprinted on the
screen; use a screen saver when possible.
G There may be interference relating to resolution,
vertical pattern, contrast or brightness in PC
mode. Change the PC mode to another resolution
or change the refresh rate to another rate or
adjust the brightness and contrast on the menu
until the picture is clear.
If the refresh rate of the PC graphic card can not
be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.
G The synchronization input waveform for
Horizontal and Vertical frequencies are separate.
G We recommend using 1920x1080, 60Hz
(50PS8***/60PS8***) for the PC mode, they provide the best picture quality.
G Connect the signal cable from the monitor output
port of the PC to the RGB (PC) port of the TV or the
signal cable from the HDMI output port of the PC to
the HDMI IN (or HDMI/DVI IN) port on the TV.
G Connect
the audio cable from the PC to the
Audio input on the TV. (Audio cables are not
included with the TV).
G If using a sound card, adjust PC sound as
required.
G If required, adjust the settings for Plug and Play
functionality
G If the graphic card on the PC does not output
analogue and digital RGB simultaneously, connect
only one of either RGB or HDMI IN (or HDMI/DVI
IN) to display the PC output on the TV.
G If graphic card on the PC does output analogue
and digital RGB simultaneously, set the TV to
either RGB or HDMI; (the other mode is set to
Plug and Play automatically by the TV.)
G DOS mode may not work depending on the video
card if you use a HDMI to DVI cable.
G If you use too long an RGB-PC cable, there may
be interference on the screen. We recommend
using under 5m of cable. This provides the best
picture quality.
21
EXTERNAL EQUIPMENT SETUP
Screen Setup for PC mode
Screen Reset
Returns Position, Size and Phase to the factory default settings.
PICTURE
Move
SCREEN
OK
E
EXTERNAL EQUIPMENT SETUP
This function works in the following mode : RGB[PC].
• Contrast
100
• Brightness
50
• Sharpness
70
• Colour
70
• Tint
0
• Picture Reset
Previous
Auto Config.
To Set
Position
R
• Advanced Control
Screen
Move
Resolution
Yes
G
No
Size
Phase
Reset
1 MENU
2
3
Select T V S E T U P.
OK
Select P I C T U R E.
OK
Select S c r e e n.
OK
Select R e s e t.
4
5
OK
Select Y e s.
6
OK
Run R e s e t.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
22
Adjustment for screen Position, Size, Phase
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the
picture phase manually.
PICTURE
Move
SCREEN
OK
Move
Previous
E
• Contrast
Resolution
100
• Brightness
50
• Sharpness
70
• Colour
70
• Tint
0
Auto Config.
D
Position
R
G
G
F
• Advanced Control
Size
G
E
EXTERNAL EQUIPMENT SETUP
This function works in the following mode : RGB[PC].
• Picture Reset
Phase
Screen
Reset
1 MENU
2
3
OK
Select P I C T U R E.
OK
Select S C R E E N.
OK
Select P o s i t i o n, S i z e or P h a s e.
4
5
Select T V S E T U P.
Make appropriate adjustments.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
23
EXTERNAL EQUIPMENT SETUP
Selecting Resolution
To view a normal picture, match the resolution of RGB mode and selection of PC mode.
PICTURE
Move
SCREEN
OK
E
EXTERNAL EQUIPMENT SETUP
This function works in the following mode: RGB[PC]
• Contrast
Resolution
100
• Brightness
50
• Sharpness
70
• Colour
70
• Tint
0
Move
G
Previous
1024 x 768
1280 x 768
Auto Config.
1360 x 768
Position
R
• Advanced Control
G
Size
• Picture Reset
Screen
Phase
Reset
1 MENU
2
3
Select T V S E T U P.
OK
Select P I C T U R E.
OK
Select S C R E E N.
4
OK
5
Select R e s o l u t i o n.
Select the desired resolution.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
24
Auto Configure (RGB [PC] mode only)
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still
not correct, your TV is functioning properly but needs further adjustment.
PICTURE
Move
Screen
OK
100
• Brightness
50
• Sharpness
70
• Colour
70
• Tint
0
Auto Config.
Position
R
• Advanced Control
• Picture Reset
Previous
Resolution
E
• Contrast
Move
G
Size
EXTERNAL EQUIPMENT SETUP
Auto configure
This function is for automatic adjustment of the screen position, size, and phase The displayed image will be
unstable for a few seconds while the auto configuration is in progress.
To Set
Yes
No
Phase
Screen
Reset
1 MENU
Select T V S E T U P.
• If the position of the image is still not correct,
try Auto adjustment again.
2
3
• If picture needs to be adjusted again after Auto
OK
Select P I C T U R E.
OK
Select S C R E E N.
OK
Select A u t o C o n f i g ..
OK
Select Y e s.
OK
Run A u t o C o n f i g ..
adjustment in RGB (PC), you can adjust the
P o s i t i o n, S i z e or P h a s e.
• Because the image with the black background
may fail the auto adjustment, use the image with
the bright background.
4
5
6
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
25
WATCHING TV / PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
1
POWER
1
❁❂✰
Q. MENU
INPUT
POWER Switches the TV on from standby or off to standby.
TV/RAD
MENU
GUIDE
SH
TIME IFT
SH
TIME IFT
WATCHING TV / PROGRAMME CONTROL
INPUT External input mode rotate in regular sequence.
Switches the TV on from standby.(G p . 4 6)
Time Machine
OK
RETURN
EXIT
MODE Selects the remote operating modes.
RECORD
MARK
TV/RAD Selects DTV, Radio and TV programme.
Q. MENU Displays the quick menu. (G p . 2 9)
MENU Displays main menu.
Clears all on-screen displays and returns to TV viewing
3 1)
from any menu.(G p . 3 0~3
STOP
LIVE
GUIDE Shows programme schedule. (G p . 5 3)
FAV
CHAR/NUM
P
MUTE
P
A
G
E
VOLUME UP Adjusts the volume.
/DOWN
DELETE
MARK Check and un-check programmes in the USB menu or
Recorded TV menu.
FAV Displays the selected favourite programme.(G p . 4 4)
CHAR/NUM Used to edit programme title in REC.LIST and schedule list.
DELETE
LIST
Q.VIEW
REPEAT
RATIO
AV MODE
ENERGY SAVING
MUTE Switches the sound on or off.
Programme Selects a programme.
UP/DOWN
PAGE Move from one full set of screen information to the next
UP/DOWN one.
0~9 number Selects a programme.
button Selects numbered items in a menu.
Use for character/number input.
LIST Displays the programme table.(G p . 4 3)
Q.VIEW Returns to the previously viewed programme.
26
POWER
❁❂✰
Q. MENU
THUMBSTICK Allows you to navigate the on-screen menus and adjust
(Up/Down/Left the system settings to your preference.
Right) Arrow buttons.
INPUT
OK Accepts your selection or displays the current mode.
TV/RAD
MENU
GUIDE
SH
TIME IFT
SH
TIME IFT
OK
RETURN
EXIT
RECORD
MARK
RETURN(EXIT) Allows the user to move return one step in an interactive
application or other user interaction function.
RECORD Selects button to record the watching programme or make
recording schedules.
STOP
STOP Stops processing of time machine function. (Playback,
Record, etc)
LIVE
FAV
CHAR/NUM
P
P
A
G
E
LIVE Return to the live.
MUTE
Coloured These buttons are used for teletext (on T E L E T E X T
buttons models only) , P r o g r a m m e e d i t, R e c o r d l i s t,
M u l t i m e d i a, G u i d e, S c h e d u l e l i s t.
DELETE
WATCHING TV / PROGRAMME CONTROL
Time Machine FF (Rewind), GG (Fast Forward), G (Playback), l l
control buttons (Pause), , (Jump thumbnail)
(Freezes the current frame by pressing the l l (Pause) button.)
Time Machine
REPEAT Used for playing the Recorded TV function.
2
TELETEXT These buttons are used for teletext.
BUTTONS For further details, see the ‘Teletext’ section.(G p . 1 2 2)
SUBTITLE Recalls your preferred subtitle in digital mode.
LIST
Q.VIEW
INFO i Shows the present screen information.
REPEAT
2
RATIO
AV MODE
ENERGY SAVING
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu appears
at the screen.(G p . 4 7)
RATIO Selects your desired picture format.
AV MODE It helps you select and set images and sounds when connecting AV devices.(G p . 5 1)
ENERGY SAVING Adjust the Energy Saving mode of the TV.(G p . 9 1)
Installing Batteries
■
Open the battery compartment
cover on the back side and install
the batteries matching correct
polarity (+ with +, - with -).
■
Install two 1.5V AAA batteries.
Don’t mix old or used batteries with
new ones.
■
Close cover.
27
WATCHING TV / PROGRAMME CONTROL
TURNING ON THE TV
- When your TV is turned on, you will be able to use its features.
WATCHING TV / PROGRAMME CONTROL
1
Firstly, connect the power cord correctly.
At this stage, the TV switches to standby mode.
2
In standby mode to turn TV on, press the r / I, INPUT or
P D E button on the TV or press the POWER, INPUT, P
or NUMBER button on the remote control and the
TV will switch on.
! NOTE
G
If the TV is unplugged once or turn off with the AC power control switch (or
TV, the time setting is set to A u t o to set time automatically.
Initialising setup
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the
M o d e S e t t i n g , T i m e Z o n e, T i m e M a c h i n e S e t t i n g, A u t o t u n i n g.
Note:
a. If you close without completing the initial setting, the Initial Setting menu can be displayed again.
b. Press the RETURN button to change the current OSD to the previous OSD.
c. For those countries without confirmed DTV broadcasting standards, some DTV features might not
work, depending on the DTV broadcasting environment.
d. "Home Use” mode is the optimal setting for home environments, and is the TV's default mode.
e. "Store Demo" mode is the optimal setting for store environments. If a user modifies image quality
data, “Store Demo” mode initializes the product to the image quality set by us after a certain period of time.
f. The mode (Home Use, Store Demo) can be changed by executing Mode Setting in the OPTION
menu.
PROGRAMME SELECTION
1
Press the P
number.
or NUMBER buttons to select a programme
VOLUME ADJUSTMENT
1
Press the
+ or - button to adjust the volume.
If you wish to switch the sound off, press the MUTE button.
28
(power) button) on the
You can cancel this function by pressing the MUTE,
+ or - button.
QUICK MENU
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
Q.Menu (Quick Menu) is a menu of features which users might use frequently.
F
M u l t i A u d i o: Selects the sound output.
S l e e p T i m e r: Select the amount of time
before your TV turns off automatically.
F a v o u r i t e : Selects the favourite programme.
R e m o v e U S B d e v i c e: Selects the remove USB
device menu to detach safely a USB device from
the TV.
•
•
•
•
Aspect Ratio
G
WATCHING TV / PROGRAMME CONTROL
A s p e c t R a t i o: Selects your desired picture format.
For Zoom Setting, select 14:9, Zoom or Cinema Zoom
in Ratio Menu. After completing Zoom Setting, the
display goes back to Q.Menu.
C l e a r V o i c e I I : By differentiating the human
•
sound range from others, it helps make human voices
sound better.
P i c t u r e M o d e: Selects the factory preset pic•
ture depend on the viewing environment.
S o u n d M o d e: Selects the factory preset sound
•
for type of programme.
•
16:9
1Q. MENU
Display each menu.
2
Select your desired Source.
3
OK
• Press the Q . M E N U button to return to normal TV viewing.
29
WATCHING TV / PROGRAMME CONTROL
ON-SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
G p.
WATCHING TV / PROGRAMME CONTROL
2
3
OK
OK
4 MENU
30
G p.
70
G p.
63
G p.
59
GUIDE
REC. LIST
SCHEDULE
RECORD
MULTIMEDIA
INPUT
SIMPLINK
TV SETUP
G p.
1 MENU
53
73
G p.
46
Display each menu.
Select a menu item.
Accept the current selection.
Return to TV viewing.
G p.
47
SETUP
Move
PICTURE
OK
Move
Auto Tuning
Aspect Ratio
Manual Tuning
Picture Wizard
Energy Saving : Intelligent Sensor
Programme Edit
Booster
OK
: 16:9
Picture Mode
: On
: Vivid
Software Update : On
• Contrast 100
Diagnostics
• Brightness 50
• Sharpness 70
• Colour
70
E
Move
AUDIO
OK
Move
Time Machine Mode : On
Auto Volume
: Off
Recording Quality
Clear Voice II
: Off
: High
• Level
Time Machine Initialisation
USB Device Initialisation
Balance
DivX Reg.Code
Sound Mode
OK
3
0
L
R
: Standard
• SRS TruSurround XT: Off
Deactivation
• Treble
50
• Bass
50
WATCHING TV / PROGRAMME CONTROL
TIME MACHINE
E
LOCK
Move
OK
OPTION
Move
OK
TIME
Move
Audio Language
: English
Clock
Set Password
Subtitle Language
: English
Off Time
: Off
Block Programme
Hard of Hearing(
On Time
: Off
Lock System
Parental Guidance
Input Block
: Off
: Blocking Off
) : Off
Input Label
OK
Sleep Timer : Off
SIMPLINK
: Off
Key Lock
: Off
Simple Manual
ISM Method
:Normal
E
31
WATCHING TV / PROGRAMME CONTROL
AUTO PROGRAMME TUNING
Use this to automatically find and store all available programmes.
When you start auto programming, all previously stored service information will be deleted.
The maximum number of programmes that can be stored is 400. But the number may differ slightly depending
on broadcasting signals.
WATCHING TV / PROGRAMME CONTROL
SETUP
Move
OK
SETUP
Auto Tuning
Auto Tuning
Manual Tuning
Manual Tuning
Programme Edit
Booster
Move
OK
Programme Edit
: On
Software Update : On
Diagnostics
Booster
: On
Check your antenna connection.
Software Update The
: On
previous channel information
will be updated during Auto
Diagnostics
Tuning.
Automatic Numbering
Start
Close
1 MENU
2
3
Select T V S E T U P.
OK
Select S E T U P.
OK
Select A u t o T u n i n g.
OK
Select S t a r t.
4
5
OK
Run A u t o t u n i n g.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
32
MANUAL PROGRAMME TUNING (IN DIGITAL MODE)
Manual Tuning lets you manually add a programme to your programme list.
When selecting DTV input signal, you can view the on-screen signal strength monitor to see the quality of the
signal being received.
Move
SETUP
OK
Auto Tuning
Auto Tuning
Manual Tuning
Manual Tuning
Programme Edit
Booster
Programme Edit
: On
Move
F
OK
DTV
G
Your receiver will add this
channel to your channel list.
Software Update : On
Booster
: VHF
On CH.
Software Update : On
Diagnostics
Diagnostics
Bad
8
Normal
Good
Update
Close
1 MENU
2
3
Select T V S E T U P.
• Use NUMBER buttons to input a 4-digit pass-
WATCHING TV / PROGRAMME CONTROL
SETUP
O n’.
word in L o c k S y s t e m ‘O
OK
Select S E T U P.
OK
Select M a n u a l T u n i n g.
OK
Select D T V.
4
5
Select the desired channel number.
6
OK
Update.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
33
WATCHING TV / PROGRAMME CONTROL
MANUAL PROGRAMME TUNING (IN ANALOGUE MODE)
Manual Tuning lets you manually tune and arrange the stations in whatever order you desire.
SETUP
Move
SETUP
OK
Move
WATCHING TV / PROGRAMME CONTROL
Auto Tuning
Auto Tuning
Manual Tuning
Manual Tuning
TV
F
Software Update : On
Storage
Programme Edit
System
Booster
: On
Band
Software Update
: On
Diagnostics
Diagnostics
Programme Edit
Booster
: On
OK
G
3
B/B
V/UHF
Channel
0
Fine
F G
Search
F G
Name
C 02
Store
Close
1 MENU
2
OK
6
Select V / U H F or C a b l e.
Select T V S E T U P.
7
or
Select S E T U P.
1
2
3
4
5
6
7
8
9
Select the desired
channel number.
0
3
OK
Select M a n u a l T u n i n g.
4
OK
5
8
Commence searching.
9
OK
Select T V.
or
1
2
3
4
5
6
8
9
7
Select the desired programme number on.
Select S t o r e
10
OK
0
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
O n’.
• Use NUMBER buttons to input a 4-digit password in L o c k S y s t e m ‘O
• To store another channel, repeat steps 4 to 9.
34
A
Assigning a station name
You can assign a station name with five characters to each programme number.
6
1 MENU
3
Select T V S E T U P.
OK
Select S E T U P.
OK
Select M a n u a l T u n i n g.
4
OK
5
A
7
OK
Select C l o s e .
8
OK
Select S t o r e .
Select T V.
OK
Select the position and make
your choice of the second character, and so on.
You can use an the alphabet A
to Z , the number 0 to 9 , +/ -,
and blank.
Select N a m e.
Fine Tuning
WATCHING TV / PROGRAMME CONTROL
2
OK
Normally fine tuning is only necessary if reception is poor.
1 MENU
2
3
4
Select T V S E T U P.
OK
Select S E T U P.
OK
Select M a n u a l T u n i n g.
OK
Select T V.
5
6
Select F i n e.
Fine tune for the best picture and
sound.
OK
Select S t o r e
4
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
35
WATCHING TV / PROGRAMME CONTROL
PROGRAMME EDIT
When a programme number is skipped, it means that you will be unable to select it using P
viewing.
button during TV
If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or
select it in the Programme edit menu.
This function enables you to skip the stored programmes.
WATCHING TV / PROGRAMME CONTROL
You can change the programme number using “Move”function, if “Automatic Numbering” is unchecked when you
start Auto Tuning.
1
SETUP
Move
TEN Digital
OK
DTV
RADIO
1 TEN Digital
2 ABC TV Sydney
7 7 Digital
Auto Tuning
TV
9 Nine Digital
10 TEN Digital
11 TEN Guide
12 TEN HD
20 ABC HDTV
21 ABC2
22 ABC TV
Software Update : On
70 7 HD Digital
71 7 Digital 1
Diagnostics
72 7 Digital 2
73 7 Digital 3
Manual Tuning
Programme Edit
Booster
: On
77 7 Guide
90 Nine Digital HD
E
Pr.Change
Navigation
P
Page Change
Previous
Skip
1 MENU
2
3
Select T V S E T U P.
OK
Select S E T U P.
OK
Select P r o g r a m m e E d i t.
4
OK
Enter the P r o g r a m m e E d i t.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
36
(IN DTV/RADIO MODE)
A
Skipping a programme number
1
Select a programme number to be skipped.
2
3
BLUE Release the skipped programme.
programme shows in blue and these programmes will not be selected by the P
buttons during TV viewing.
• If you wish to select a skipped programme, directly
enter the programme number with the NUMBER buttons or select it in the programme edit or EPG.
WATCHING TV / PROGRAMME CONTROL
BLUE Turn the skipped programme number to blue.
• When programmes are to be skipped, skipped
37
WATCHING TV / PROGRAMME CONTROL
(IN TV MODE)
This function enables you to delete or skip the stored programmes.
You can also move some programme and use other programme numbers.
Deleting a programme
A
WATCHING TV / PROGRAMME CONTROL
1
Select a programme number to be Deleted.
• The selected programme is deleted, all the fol-
lowing programmes are shifted up one
2
RED
Turn the deleted programme number to red.
3
RED
Release the deleted programme.
Moving a programme
A
1
Select a programme number to be moved.
2
GREEN
Turn the moved programme number to GREEN.
3
GREEN
A
Release the moved programme.
Skipping a programme number
1
Select a programme number to be skipped.
2
BLUE
Turn the skipped programme number to blue.
3
BLUE
38
Release the skipped programme.
• When a programme number is skipped it means
that you will be unable to select it using the
P
button during normal TV viewing.
• If you wish to select a skipped programme,
directly enter the programme number with the
NUMBER buttons or select it in the programme
edit or EPG.
BOOSTER
If reception is poor select Booster to On.
When the signal is strong, select “Off”.
Move
OK
Auto Tuning
Manual Tuning
Manual Tuning
Programme Edit
2
3
4
Move
OK
Programme Edit
: On
Off
Software Update : On
Software Update : On
On
On
Diagnostics
Diagnostics
Booster
1 MENU
SETUP
Auto Tuning
: On
Booster
Select T V S E T U P.
OK
Select S E T U P.
OK
Select B o o s t e r.
OK
Select O n or O f f.
WATCHING TV / PROGRAMME CONTROL
SETUP
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
39
WATCHING TV / PROGRAMME CONTROL
SOFTWARE UPDATE
Software Update means software can be downloaded through the digital terrestrial broadcasting system.
SETUP
Move
OK
Auto Tuning
Manual Tuning
Manual Tuning
Programme Edit
WATCHING TV / PROGRAMME CONTROL
Booster
1 MENU
2
3
4
5
40
Booster
: On
Software Update : On
Off
Diagnostics
Diagnostics
On
On
Select S E T U P.
OK
Select S o f t w a r e U p d a t e.
Select O n or O f f.
• If you select O n, a user confirm message box will be displayed to notify that new
software is found.
Save.
OK
Software Update : On
OK
OK
Move
Programme Edit
: On
Select T V S E T U P.
OK
SETUP
Auto Tuning
* When setting “Software Update”
Yes
No
After the Software Update is
complete, the System restarts.
Software downloading progress.
Ver. 0.0.03.00
Ver. 0.0.02.01
i
New Software is successfully installed.
65%
Hide
Stop
When the power is turned off, downloading
starts.
When the power is turned on while updating, the progress status is displayed.
WATCHING TV / PROGRAMME CONTROL
Software update is available.
Would you like to download now?
(approximately 30 Min ~ 2 hours)
Your TV software is updated when you turn off the tv
using the remote control or local key.
Do not disconnect the TV power cable from the outlet.
Select the Y e s using the
button and you will see the following
picture.
E
Occasionally, a transmission of
updated digital software information will result in the following
menu on the TV screen.
- During Progress of a Software Update, please note the following:
• Power to the TV must not be interrupted.
• The TV must not be switched off.
• The antenna must not be disconnected.
• After Software Update, you can confirm the updated software version in Diagnostics menu.
• It may take hours to download the software, so make sure that the power stays on during the download.
41
WATCHING TV / PROGRAMME CONTROL
DIAGNOSTICS
This function enables you to view information on the Manufacturer, Model/Type, Serial Number and Software
Version.
This displays the information and signal strength of the tuned MUX.
This displays the signal information and service name of the selected MUX.
(*MUX: A higher directory of channels in digital broadcasting (a single MUX contains multiple channels.))
WATCHING TV / PROGRAMME CONTROL
Engineering Diagnostics
SETUP
Move
Manufacturer : LG Electronics Inc.
Model/Type : 50PS80ED
Software Version : V03.00.00
OK
Auto Tuning
Manual Tuning
D
: On
Ch. 8
Ch. 9A
Software Update : On
Ch. 43
Programme Edit
Booster
Diagnostics
E
Previous
1 MENU
2
3
4
5
MENU
Exit
Select T V S E T U P.
OK
Select S E T U P.
OK
Select D i a g n o s t i c s.
OK
Popup
Display Manufacturer, Model/Type and Software Version.
OK
Display the information of Channel.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
42
SELECTING THE PROGRAMME TABLE
You can check which programmes are stored in the memory by displaying the programme table.
Mini Glossary
Programme List
1 TEN Digital
9 Nine Digital
10 TEN Digital
Exit
A
Displaying programme LIST
1
Display the PROGRAMME LIST.
LIST
A
have been set up to be skipped by in the
programme edit mode.
• Some programmes with the programme number
shown in the programme LIST indicate there is
no station name assigned.
Selecting a programme in the programme list
1
2
A
• You may find some blue programmes. These
WATCHING TV / PROGRAMME CONTROL
Displayed when the
Locked Programme.
Select a programme.
OK
TV/RAD
From the programme you are currently watching, the mode will change
from DTV to Radio to TV.
Switch to the chosen programme number.
Paging through a programme list
1
P
P
A
G
E
Turn the pages.
2
LIST
Return to normal TV viewing.
43
WATCHING TV / PROGRAMME CONTROL
FAVOURITE PROGRAMME SETUP
A
Selecting favourite programme
Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.
Favourite programmes is a convenient feature that lets you quickly scan up to programmes of your choice without
having to wait for the TV to scan through all the in-between programmes.
F
Favourite
WATCHING TV / PROGRAMME CONTROL
1
P
P
A
G
E
or
1
2
3
4
5
6
7
8
9
Select your desired programme.
0
2Q. MENU
Favourite
3
4Q. MENU
Select F a v o u r i t e.
✱✶✯❀✘✼❃✻
Select F a v o u r i t e .
Return to TV viewing.
✱✶✯❀✘✼❃✻
• This will automatically include the selected programme into your favourite
programme list.
A
Displaying the favourite programme list
Favourite List
1 MARK
1 ABC TV Sydney
FAV
9 Nine Digital
11 ABC TV
Exit
44
G
Display the Favourite Programme List.
BRIEF INFORMATION
Brief Info shows the present screen information.
1
Show the Brief Info on the screen.
2RETURN
2
✱✶✯❀✘✼❃✻
3
4
5
6
7
1
DTV
DTV
DOLBY DIGITAL SD
2
TALK TO THE ANIMALS
Fri. 13 Feb. 2009
Nine Digital
D
10:40
10:10
11:40
Next
576i
G
O AMIGO OCULTO - HD
8
D
The programme is broadcast with Dolby Digital audio.
Use the Q . M E N U to select Dolby Digital audio.
Teletext : Displayed with a Teletext Programme.
MPEG4 / MP3
Subtitle
4:3
16:9
576i
576p
720p
1080i
The original aspect ratio of the video is 4:3
The original aspect ratio of the video is 16:9 (wide)
1
Banner information
2
Programme title
3
Day, Month, Year
4
Programme start time
5
Programme progress bar
6
Programme finish time
7
Present time
8
Programme information
WATCHING TV / PROGRAMME CONTROL
Return to TV viewing
Video Resolution
MPEG4 / MP3
45
WATCHING TV / PROGRAMME CONTROL
INPUT LIST
HDMI can be recognized by a detect pin and thus enabled only when an external device approves voltage.
And AV, Componet , RGB can be recognized when an external device is connected.
By using T V / R A D button, you can move from External Input to RF Input and to the last watched programme in
DTV/RADIO/TV mode.
1
INPUT
WATCHING TV / PROGRAMME CONTROL
46
OK
Select the input source.
Antenna
AV1
AV2
Component1
Component2
HDMI4
HDMI3
HDMI2
HDMI1
RGB
• A n t e n n a : Select it when watching the DTV/TV/Radio.
• A V : Select it when watching the VCR or external equipment.
• C o m p o n e n t : Select it when using the DVD or the Digital set-top box depends on connector.
• R G B :Select it when using PC depends on connector.
• H D M I : Select it when using DVD, PC or Digital set-top box depend on connector.
This function operates only with devices with the SIMPLINK logo.
Please check the SIMPLINK logo.
This TV might not function properly when using it with other products with HDMI-CEC function.
This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings.
OPTION
Move
Audio Language
Subtitle Language
Hard of Hearing(
Subtitle Language
5
SIMPLINK
Key Lock
: Off
Key Lock
: English
) : Off
Off
: On
On
On
: Off
Simple Manual
:Normal
ISM Method
:Normal
E
Select T V S E T U P.
OK
Select S E T U P.
OK
Select S I M P L I N K.
OK
Select O n or O f f.
OK
OK
: English
Input Label
: On
E
4
Hard of Hearing(
SIMPLINK
ISM Method
3
Move
: English
) : Off
Simple Manual
2
OPTION
Audio Language
Input Label
1 MENU
OK
: English
WATCHING TV / PROGRAMME CONTROL
O f f”.
If you do not want SIMPLINK menu,select “O
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
47
WATCHING TV / PROGRAMME CONTROL
3
VIDEO
AUDIO
COMPONENT IN
PB
PR
R
IN1
Select Home Theatre in the Speaker menu by pushing
the S I M P L I N K button.
L
VIDEO
R -AUDIO-L
RGB IN(PC)
2
1
AUDIO IN
(RGB/DVI)
VIDEO
3
(CONTROL & SERVICE)
WATCHING TV / PROGRAMME CONTROL
48
Connect the Digital Audio output terminal on the back
of the TV and the Digital Audio input terminal of the
Home Theatre using optical cables.
OPTICAL
DIGITAL
AUDIO OUT
- AUDIO - (Mono)
2
Connect the H D M I / D V I I N 1, H D M I I N 2 , H D M I
I N 3 or H D M I I N 4 terminal on the back of the TV
and the HDMI output terminal of the Home Theatre
using HDMI cables.
RS-232C IN
1
Y
Connecting to Home Theatre with the SIMPLINK logo.
OUT
1
2
2
1
G
When you select or operate a media device with home theatre function, the speaker automatically switches to home theatre speaker
(HT speaker).
Home Theatre
! NOTE
Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the
SIMPLINK device with the HDMI cable.
G When you switch the Input source using the INPUT button on the remote control, you can stop the operation of a device controlled by SIMPLINK
G
A
SIMPLINK Functions
SIMPLINK Menu
button and then OK button to select the desired SIMPLINK source.
T V v i e w i n g : Switch to the previous TV programme
regardless of the current mode.
2
D I S C p l a y b a c k : Select and play connected discs.
When multiple discs are available, the titles of discs are
conveniently displayed at the bottom of the screen.
1
2
E
1
E
Press the
Selected Device
When device is not connected (displayed in gray)
3
5
E
H D D R e c o r d i n g s p l a y b a c k : Play and control
recordings stored in HDD.
4
E
5
When a device is connected
(displayed in bright colour)
E
4
V C R p l a y b a c k : Play and control the connected
VCR.
E
3
WATCHING TV / PROGRAMME CONTROL
Disc playback
Control connected AV devices by pressing the
, OK, G, A, l l, FF and GG buttons.
Direct Play
After connecting AV devices to the TV, you can directly control the devices and play media without additional settings.
Select AV device
Enables you to select one of the AV devices connected to the TV and operate it.
Power off all devices
When you switch off the TV, all connected devices are turned off.
Switch audio-out
Offers an easy way to switch audio-out.
Sync Power on
When the equipment with Simplink function connected HDMI terminal starts to play, The TV will change automatically to turn
on mode.
* A device, which is connected to the TV through an HDMI cable but does not support SIMPLINK, does not provide this function.
Note: To operate SIMPLINK, an HDMI cable over Version 1.3 with *CEC function should be used. (*CEC: Consumer Electronics
Control).
Select Device
Select
A u d i o O u t t o H o m e t h e a t r e/ A u d i o O u t t o T V :
Select Home theatre or TV speaker for Audio Out.
• H o m e t h e a t r e: Only one supported at a time
• D V D , R e c o r d e r: Up to four supported at a time
• V C R: Only one supported at a time
49
WATCHING TV / PROGRAMME CONTROL
INPUT LABEL
You can set a label for each input source when it's not in use.
Available label: VCR -> DVD -> Set Top Box -> Satellite -> Cable Box -> Game -> PC -> HD-DVD -> Blu-ray.
WATCHING TV / PROGRAMME CONTROL
OPTION
Move
Audio Language
: English
Subtitle Language
: English
Hard of Hearing(
OK
) : Off
Input Label
OPTION
Move
OK
Audio Language
: English
AV1
F
Subtitle Language : English
AV2
Hard of Hearing( ) : Off
Component1
Input Label
SIMPLINK
: Off
SIMPLINK
: Off Component2
Key Lock
: Off
Key Lock
: Off RGB
Simple Manual
Simple Manual
ISM Method
:Normal
E
ISM Method
E
G
HDMI1
:Normal
HDMI2
HDMI3
HDMI4
Close
1 MENU
2
3
4
5
Select T V S E T U P.
OK
Select OPTION.
OK
Select Input Label.
OK
Select the source.
Select the label.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
50
AV MODE
You can select the optimal images and sounds when connecting AV devices to external input.
2
AV MODE
Cinema
Game
Sport
Press the AV MODE button repeatedly to select the desired source.
OK
• If you select C i n e m a M o d e in A V m o d e, C i n e m a mode will be
selected both for P i c t u r e M o d e and S o u n d M o d e in P I C T U R E
menu and A U D I O menu respectively.
O f f” in A V m o d e, the picture and image which you ini• If you select “O
tially set will be selected.
WATCHING TV / PROGRAMME CONTROL
1
Off
SIMPLE MANUAL
You can easily and effectively access the TV information by viewing a simple manual on the TV.
During the Simple Manual operation, audio will be muted.
OPTION
Move
Audio Language
Subtitle Language
Hard of Hearing(
OK
: English
: English
) : Off
Input Label
SIMPLINK
: Off
Key Lock
: Off
Simple Manual
ISM Method
:Normal
E
Page < 2/12 >
1 MENU
2
3
OK
OK
4
Select T V S E T U P.
Select O P T I O N.
OK
5RETURN
EXIT
Select the part of the manual
you want to see.
Return to TV viewing.
Select S i m p l e M a n u a l.
51
WATCHING TV / PROGRAMME CONTROL
INITIALISING
(RESET TO ORIGINAL FACTORY SETTINGS)
O n", the message to enter the password appears.
When the L o c k S y s t e m menu is "O
OPTION
Move
OK
OPTION
Move
E
SIMPLINK
: On
SIMPLINK
Key Lock
: Off
Key Lock
Simple Manual
2
3
4
5
: On
!
: Off
All user
settings and channel
Simple Manual settings will be reset.
Still Continue?
:Normal
ISM Method
:Normal
ISM Method
Set ID
:1
Set ID
:1
Demo Mode
: Off
Demo Mode
Yes
: Off
Mode Setting
: Home Use
Mode Setting
: Home Use
Factory Reset
1 MENU
OK
E
WATCHING TV / PROGRAMME CONTROL
This function initializes all settings.
It is useful to initialize the product or when you move to other city.
When the Factory Reset is completed, you must restart the Initializing setup.
Select T V S E T U P.
OK
Select OPTION.
OK
Select F a c t o r y R e s e t.
OK
Select Y e s.
OK
Start Factory Reset.
No
Factory Reset
O n”, if you forget your password,
• In L o c k S y s t e m ”O
press ‘7’, ‘7’, ‘7’, ‘7’ on the remote control handset.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
52
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
EPG (ELECTRONIC PROGRAMME GUIDE)
(IN DIGITAL MODE)
This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing
options.
The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of
these programme details will vary, depending on the particular broadcaster).
This function can be used only when the EPG information is broadcast by broadcasting companies
The EPG displays the programme details for next 8 days.
Programme Guide
❉❚
❉❚
❉❚
THE GARDEN GURUS SINGAPOR...
TALK TO THE...
THE GARDEN GURUS SINGAPOR...
E
TALK TO THE...
99 Nine Guide
E
90 Nine Digtal
13 Feb. 2009 16:50
100 ABC TV3
15 ABC DiG Radio
16 ABC DiG Jazz
Sat. 13 Feb.
ALL
77 Guide
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
90 Nine Digtal
TALK TO THE...
99 Nine Guide
TALK TO THE...
100 ABC TV3
Favorite
INFO
i
Information
Date
Mode
THE GARDEN
GURUS
SINGAPOR...
TALK TO
THE...
SINGAPOR...
THE GARDEN
90 GURUS
Nine Digtal
✲❂❄
✲❂❄
13 Feb. 2009 16:30 ~17:00
15 ABC DiG Radio
Record
16 ABC DiG Jazz
E
FAV
18:00
E
E
❉❚
17:00
E
E
E
E
❉❚
❉❚
90 Nine Digtal
❉❚
77 Guide
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
18:00
E
❉❚
17:00
E
ALL
❉❚
✲❂❄
✲❂❄
Sat. 13 Feb.
E
✲❂❄
E
13 Feb. 2009 16:50
E
90 Nine Digtal
E
✲❂❄
E
Pr. Change
Record / Remind
Schedule
Schedule List
FAV
Favorite
Mode
INFO
i
Information
Date
GoChange
to this PR.
Pr.
Schedule
Close
Record / Remind
Schedule List
✱✶✯❀✘✼❃✻
1 GUIDE
Display the P r o g r a m m e G u i d e.
2
Select desired programme.
■
3
YELLO
YELLOW
4
EPG (ELECTRONIC PROGRAMME GUIDE)
Programme Guide
Show the Popup menu.
OK
If the TV is unplugged once or turn off with
the AC power control switch (or
(power)
button) on the TV, the reserved programme
reminding will not work.
Select the desired Popup menu.
When you press the YELLOW button from the currently broadcasting programme, ' Record',
'Go to this PR.', 'Close' will be displayed.
■ When you press the YELLOW button from the programme after the current time that is not
reserved, 'Record', 'Remind', 'Close' will be displayed.
■ When you press the YELLOW button from the reserved programme reminding, ‘Record’,
‘Cancel Remind’, 'Close' will be displayed.
• When you press the YELLOW button from the reserved programme recording, ‘Cancel
Record’, ‘Remind’, 'Close' will be displayed.
■
53
Button Function in NOW/NEXT Guide Mode
Programme Guide
✲❂❄
90 Nine Digtal
13 Feb. 2009 16:50
✲❂❄
TALK TO THE...
THE GARDEN GURUS SINGAPOR...
99 Nine Guide
TALK TO THE...
THE GARDEN GURUS SINGAPOR...
E
100 ABC TV3
E
15 ABC DiG Radio
❉❚
BLUE
90 Nine Digtal
E
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
REPEAT
18:00
77 Guide
❉❚
Move to schedule option popup.
17:00
E
❉❚
YELLO
YELLOW
Sat. 13 Feb.
ALL
❉❚
E
Change EPG mode.
E
RED
16 ABC DiG Jazz
Switch the Schedule list On or off.
E
FAV
Favourite
INFO
i
Information
Mode
Pr. Change
Record / Remind
Schedule
Schedule List
Change Programme (Go to this Programme).
OK
Page Up/Down.
P
A
G
E
P
✱✶✯❀✘✼❃✻
Change NOW&NEXT Mode.
RECORD
GUIDE
Switch off EPG.
Set Record/Remind.
The detail information on or off.
Select the Broadcast Programme.
MARK
Change the favourite Programme mode.
FAV
✱✶✯❀✘✼❃✻
✱✶✯❀
✼❃✻
Button Function in 8Day Guide Mode
Change EPG mode.
Programme Guide
90 Nine Digtal
13 Feb. 2009 16:50
Enter Date setting mode.
❉❚
18:00
E
77 Guide
❉❚
90 Nine Digtal
TALK TO THE...
THE GARDEN GURUS SINGAPOR...
99 Nine Guide
TALK TO THE...
❉❚
❉❚
❉❚
❉❚
❉❚
THE GARDEN GURUS SINGAPOR...
100 ABC TV3
❉❚
Move to schedule option popup.
❉❚
E
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
YELLO
YELLOW
17:00
E
GREEN
Sat. 13 Feb.
ALL
E
❉❚
E
✲❂❄
✲❂❄
E
RED
✱✶✯❀✘✼❃✻
15 ABC DiG Radio
E
EPG (ELECTRONIC PROGRAMME GUIDE)
✻
EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
16 ABC DiG Jazz
E
FAV
REPEAT
BLUE
Switch the Schedule list On or off.
Favorite
Mode
INFO
i
Information
Date
✱✶✯❀✘✼❃✻
Pr. Change
Record / Remind
Schedule
Schedule List
GUIDE
Switch off EPG.
Change Programme (Go to this Programme).
OK
The detail information on or off.
Select a Programme.
MARK
FAV
✱✶✯❀✘✼❃✻
Select the Broadcast Programme.
RECORD
✱✶✯❀✘✼❃✻
P
54
P
A
G
E
Page Up/Down.
Change the favourite Programme mode.
✱✶✯❀✘✼❃✻
✱✶✯❀
✼❃✻
Set Record/Remind.
Button Function in Date Change Mode
Programme Guide
✱✶✯❀✘✼❃✻
❉❚
❉❚
❉❚
❉❚
❉❚
GUIDE
E
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
18:00
E
77 Guide
90 Nine Digtal
TALK TO THE...
THE GARDEN GURUS SINGAPOR...
99 Nine Guide
TALK TO THE...
THE GARDEN GURUS SINGAPOR...
E
Select a date and change to the
selected date.
Sat. 13 Feb.
17:00
E
❉❚
13 Feb. 2009 16:50
E
ALL
E
90 Nine Digtal
❉❚
E
✲❂❄
✲❂❄
100 ABC TV3
E
Switch off Date setting mode.
15 ABC DiG Radio
E
GREEN
16 ABC DiG Jazz
Switch off EPG.
E
Date. Change
Date Exit
EPG (ELECTRONIC PROGRAMME GUIDE)
Button Function in Detailed Information Menu
YELLO
YELLOW
Move to schedule option popup.
Information
13 Feb. 2009 16:50
Text Up/Down.
13 Feb 2009
✱✶✯❀✘✼❃✻
GUIDE
Switch off EPG.
The detail information on or off.
i Info. Exit
Schedule
INFO
Button Function in Schedule List Mode
✱✶✯❀✘✼❃✻
REPEAT
Change to Guide mode.
BLUE
Schedule List
2009
2
Free Space 203GB
Fri. 13 Feb. 2009 04:23
Page 1/1
Start date
Sun Mon Tue Wed Thu Fri Sat
14 Feb. (Sat.)
46h 23m
Start time
18:00
10:12 ~ 10:42
Modify
Delete
Delete all
Record (Once)
DTV 12
13/2/2009(Fri.)
17:30 ~18:00
F G
Move
Reservation
Repeat
DTV 12 ABC HDTV
Mon.~
DTV 12 ABC
HDTVSat
1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
Select Schedule list.
23h 11m
Title
Close
Modify/Delete
P
Page Change
Exit
Programme Guide
55
DVR
TIME MACHINE (PAUSE & REPLAY OF LIVE TV)
This function allows the unit to automatically record live TV and make it available for viewing at any time.
With the Time Machine turned on, you may pause and rewind normal TV viewing at any time without missing any of
the live broadcast.
(Time Machine and Recording functions may not work if the signal strength is weak.)
Time Machine Mode
TIME MACHINE
Move
OK
TIME MACHINE
Move
OK
Time Machine Mode : On
Time Machine Mode : On
Recording Quality
Recording Quality
: High
Time Machine Mode
Time Machine Initialisation
i You cannot use the features likes Time shift,
USB Device Initialisation
Record and Playback when the Time Machine
DivX Reg.Code
is turned off.
Deactivation
: High
Time Machine Initialisation
USB Device Initialisation
DivX Reg.Code
DVR
Deactivation
On
1 MENU
2
3
Off
Select T V S E T U P.
OK
Select T I M E M A C H I N E.
OK
Select T i m e M a c h i n e M o d e.
OK
Select O n or O f f.
4
• Press the R E T U R N button to return to normal TV viewing.
! NOTE
Timeshift does not support the audio only programme, but recording is possible.
G Time Machine Mode is available in TV, AV1, AV2 mode.
G
56
Time Machine Progress
1
Live TV
2
1
3
4
5
After selecting T i m e M a c h i n e Mode On, press the O K
button.
The ‘Progress Bar’?
This function indicates what Time Machine reviewing is possible, a current on-screen and live broadcasting position.
When finished enter the T i m e M a c h i n e Mode menu and
then turn T i m e M a c h i n e Mode Off.
2
1
Preview
2
Current Status while using the Time Machine
3
Current operating function while using the
DVR
As soon as Time Machine starts, a progress bar indicating
the current recording status is displayed in the bottom of
✜
the screen.
A Press the O K button to display the ‘Progress Bar’ or press
the RETURN button to hide the 'Progress Bar'.
A This function is preserved even change a Programme on
progressing the Time Machine.
A
Time Machine
Playback
Fast forward
Rewind
Pause
Direct view +
Direct view By one screen
Slow playback
4
Current location and progress time in playback
5
Total progress time of the Time Machine
! NOTE
In order to save hard-disk space, nothing is saved
when there is no signal.
G The total storage space of the hard-disk is 250
GB. 20 GB is reserved for Time Machine.
G Time Machine can be used for maximum of 2
hours.
G When turning power on, it may take up to a maximum of 3 minutes to initialize the HDD.
G The Time Machine function will not initiate for a
copy-protected Programme.
G
Because an analog broadcast is converted to a
digital signal, video that contains rapid movement
may show "cross stripes". This happens when the
analog signal is compressed and then restored in
the digital signal. The unit will attempt to reduce
this excessive picture interference.
G Maximum recording file size is up to 26GB(5Hr).
G Instant recording time is set to 3 hours and supported maximum time is up to 5 hours.
G Recording or playing the recorded Programme
may not initiate for a copy-protected Programme.
G Time Machine is not supported in the audio only
channel, but recording is possible.
G
57
DVR
Playback during the Time Machine
During the Time Machine play, the following options are available.
✜
Timeshift
TV
Delayed
Play
Use of remote control
You can playback the temporarily saved part in various methods during the Time Machine.
DVR
During playback,
repeatedly, press the R E W( FF) or F F( GG) button to speed up.
A Every time you press the button, the search speed will increase by stage (up
to 5 stages).
CONTROL
TIME
CONTROL
TIME
During playback, press the P a u s e( I I ) button.
A Pause screen is displayed.
A Every time you press the P a u s e ( I I ) button from the pause screen, it will
move screen by screen. (II IG )
A Press the P a u s e ( I I ) button and then use the F F ( GG ) button for slow
motion. ( I G )
OK
When you move the cursor using the Time Machine (< , > ) button during playback, and then press the O K button, the screen will directly play at the applicable screen where the cursor is located. (
,
)
STOP
To view the current live broadcast, press the L I V E button during playback.
,
58
LIVE
RECORDING
Use this function when you cannot watch the desired programme due to being out.
Recording or Reminding function in the Programme Guide
Programme Guide
❉❚
THE GARDEN GURUS SINGAPOR...
TALK TO THE...
THE GARDEN GURUS SINGAPOR...
E
TALK TO THE...
99 Nine Guide
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
E
90 Nine Digtal
13 Feb. 2009 16:50
100 ABC TV3
15 ABC DiG Radio
❉❚
❉❚
❉❚
16 ABC DiG Jazz
Sat. 13 Feb.
ALL
17:00
Favourite
INFO
Mode
i
Information
Date
E
TALK TO THE...
✲❂❄
90 Nine Digtal
TALK TO THE...
THE GARDEN GURUS SINGAPOR...
99 Nine Guide
TALK TO THE...
90 Nine Digtal
THE GARDEN
GURUS SINGAPOR...
✲❂❄
13 Feb. 2009 16:30 ~17:00
100 ABC TV3
15 ABC DiG Radio
Record
16 ABC DiG Jazz
E
FAV
18:00
E
77 Guide
❉❚
E
❉❚
❉❚
❉❚
❉❚
E
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
❉❚
18:00
77 Guide
❉❚
90 Nine Digtal
E
Pr. Change
Record / Remind
Schedule
Schedule List
FAV
Favourite
Mode
INFO
i
Information
Date
E
17:00
E
E
❉❚
❉❚
✲❂❄
✲❂❄
Sat. 13 Feb.
ALL
E
✲❂❄
E
13 Feb. 2009 16:50
E
90 Nine Digtal
E
✲❂❄
E
Programme Guide
Remind
Pr. Change
Close
Schedule
Record / Remind
Schedule List
✱✶✯❀✘✼❃✻
1
GUIDE
Display the P r o g r a m m e G u i d e.
DVR
2
Select desired programme.
3
OK
YELLO
YELLOW
■
Select R e c o r d or R e m i n d .
You can also select R e c o r d or R e m i n d by
pressing the
button repeatedly on the
remote control.
✱✶✯❀✘✼❃✻
RECORD
• Press the R E T U R N button to move to the previous menu
screen.
✱✶✯❀✘✼❃✻
Record
(red)
Remind
(blue)
Off
! NOTE
If you turn off the AC power control switch (or
(power) button) during the recording, the
programme being recorded may not be saved.
Therefore it is good to press the Stop (A) button
and check the reserved/recorded list, and then
turn off the power.
G Recording cannot be reserved for a period less
than 10 seconds.
G Because the title and time of the programme for
Record/Remind is based on the information
transmitted from the broadcasting station, they
may be different than the actual ones depending
on the situation of the broadcasting station.
G When it is time for the reserved recording to start
and the power of the TV is turned off, the TV will
turn on the power of the part required for the
G
recording and proceed to the reservation.
When it is time for the reserved recording to start
and the Immediate recording is in progress, the
recording of the programme currently being
recorded will be stopped and saved, and then
proceed to the reserved recording.
G Broadcast materials are protected by copyright and
that recording and playback of certain material would
only be permissible by permission of the copyright
owner. Audio and video recordings you make using
this recorder are for your personal use only. You may
not sell, lend or rent them to other people.
G If the TV is unplugged once or turn off with the
AC power control switch (or
(power) button)
on the TV, the reserved recording will not work.
G
59
DVR
Start/Stop record
You can record the channel you are watching for three hours.
RECORD
Free Space 203GB
13 Feb. (Fri.) 9:57
46h 23m
23h 11m
You can record the channel you are watching for three hours.
Start recording
(3 hour recording)
F G
Move
Modify recording
end time
OK
Manual record
Start recording
Select a programme
to record
Exit
REC
DTV 2
Live TV
DVR
1 When watching the programme, Select it you wish to record.
✼❃✻
2
RECORD
Display the recording setting.
■ You can also select this setting in the RECORD menu.
✼❃✻
3
■
4
RECORD
or
OK
Start the recording.
REC
DTV 2
During recording,
is displayed.
Recording will be set up to 3 hours.
STOP
OK
Select Yes to stop the recording.
Recording in progress.
Do you want to stop recording?
LIVE
✱✶✯❀✘✼❃✻
✱✶✯❀✘✼❃✻
■
You can also select Stop recording using
button .
the
RECORD
Yes
No
Recording completed.
• Press the R E T U R N button to return to normal TV viewing.
60
Modify recording end time
You can shorten or extend the recording time.
RECORD
Free Space 203GB
13 Feb. (Fri.) 9:57
46h 23m
Free Space 0 GB
23h 11m
RECORD
You can shorten or extend the recording time. (164 remaining minutes)
13 Feb. (Fri.) 9:57
0h 0m
0h 0m
Manual record
Select a programme
to record
Recording End Time
06:19
Close
F
Modify recording
end time
G
Not enough HDD space
Stop recording
16:00
F G
Move
Exit
OK
Move
Exit
DVR
1RECORD
2
OK
During recording ,
Select the Modify recording end time.
Set the Recording End Time.
3
OK
Select the C l o s e.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
! NOTE
G
G
When recording, if the available storage space is not sufficient, the recording will automatically Stop.
Recordings of less than 10 seconds will not be saved.
To save disk space while recording broadcasts, no data will be saved if there is no signal.
G The recording function will not initiate for a copy-protected programme.
G
G
The displayed time may differ slightly from the actual time such as no signal.
61
DVR
Manual record
This function is easy to register to reserved recording.
Timer recording is set.
Free Space 203GB
Manual Record
Fri. 13 Feb. 2009 04:23
46h 23m
23h 11m
Select the date to record.
RECORD
Sun
Free Space 203GB
13 Feb. (Fri.) 4:23
46h 23m
Timer recording is set.
Stop recording
16:00
F G
Move
Modify recording
end time
Manual record
Select a programme
to record
2
Wed
3
4
Thu
Sat
Fri
Repeat
Option
5
6
7
8
9
10
Once
11
12
Daily
13
14
15
16
17
18 Weekly
19 (Sat.)20
21
22
23
24
25
Exit
OK
Tue
Mon
1
23h 11m
Move
Mon~Fri
26
Close
Sat. 14 Fri. 2009
No schedule list
27
28
OK
Exit
Schedule List
Free Space 203GB
Schedule List
2009
Fri. 13 Feb. 2009 04:23
Page 1/1
Start time
Start date
2
14 Feb. (Sat.)
Sun Mon Tue Wed Thu Fri Sat
46h 23m
10:12
Sun
1
Mon.~ Sat
DVR
1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
Tue
Mon
2
3
Select time to record.
8
Record (Once)
DTV 11
Nov/13/2008(Thu)
5:12 PM ~ 6:02 PM
F G
Move
Reservation
Modify/Delete
P
Wed
4
Thu
5
Sat
Fri
6
7
9
10
11
12
13
15
16
17
18
19
DTV 12 ABC HDTV
20
21
22
23
24
25
26
27
Start time
End time
Move
Exit
Page Change
46h 23m
Fri. 13 Feb. 2009 04:23
23h 11m
Select the date to record.
Repeat
Title
DTV 12 ABC HDTV
Free Space 203GB
Manual Record
23h 11m
Input
Sat. 14 Fri. 2009
14
Channel
28
No schedule list
Complete
Previous
OK
Exit
Schedule List
Programme Guide
✻
5
1 RECORD
2
Select the C o m p l e t e.
Select the M a n u a l r e c o r d.
Select D a t e.
OK
3
OK
Select the repeat option.
OK
Set the desired S t a r t Time,
E n d Time, Input and Channel.
6
OK
7RETURN
Display the Schedule List.
Return to TV viewing.
4
! NOTE
G
Timeshift recording is not possible with copy-protected programmes.
Programme with copy protection fail
to record.
When a poor quality external source is recorded (for example old VHS tape) the quality of the recording
will not be optimal.
G Programmes are stored separately according to the colour system used. e.g. PAL/NTSC.
G
G
62
Manual Recording available time is maximum 3 hours and minimum 2 minutes.
When broadcasting station send the wrong time information, reserved recording may be failed.
G When reserved recording started while watching DTV, you cannot change to the ATV programme.
G
SCHEDULE LIST
This function is used to show scheduled recordings.
You can store up to 30 programmes.
Schedule List
2009
2
Free Space 203GB
Start date
Sun Mon Tue Wed Thu Fri Sat
GUIDE
REC. LIST
SCHEDULE
Fri. 13 Feb. 2009 04:23
Page 1/1
14 Feb. (Sat.)
46h 23m
Start time
10:12
Repeat
DTV 12 ABC HDTV
1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
RECORD
23h 11m
Title
Mon.~ Sat
DTV 12 ABC HDTV
10:12 ~ 10:42
Modify
Delete
Record (Once)
DTV 11
Nov/13/2008(Thu)
5:12 PM ~ 6:02 PM
F G
INPUT
SIMPLINK
TV SETUP
Reservation
Close
Modify/Delete
P
Page Change
Exit
Programme Guide
DVR
MULTIMEDIA
Move
Delete all
When you select a desired item, this PopUp menu
is displayed.
G M o d i f y: Edit the contents of S t a r t d a t e / S t a r t
t i m e/EE n d t i m e/T
T i t l e/R
R e p e a t.
You must press the RETURN button to save the
edited contents.
G D e l e t e: Delete the selected item in the list.
G Delete all: Delete all items in the list.
G C l o s e: Close the pop-up menu.
1
2
MENU
Select S C H E D U L E.
Select a desired item in the schedule list.
OK
3
OK
Show the Popup menu.
4
OK
5RETURN
Select the desired Popup menu.
Return to TV viewing.
63
DVR
RECORDING QUALITY
This function is not available while a recording is taking place.
The higher the quality of the recorded programme, the shorter the time you can record on the hard disk.
The recording quality only applies to the reserved recording for the analog broadcast and external input
signal, and the recording quality for Time Machine or Immediate recording is set to High quality.
TIME MACHINE
GUIDE
REC. LIST
SCHEDULE
RECORD
Move
OK
Time Machine Mode : On
Best
Recording Quality
: High
High
Time Machine Initialisation
Basic
USB Device Initialisation
DivX Reg.Code
Deactivation
DVR
MULTIMEDIA
1
2
MENU
OK
INPUT
SIMPLINK
TV SETUP
Select T V S E T U P.
Select T I M E M A C H I N E.
3
4
OK
Select R e c o r d i n g Q u a l i t y.
OK
Select B e s t, H i g h or B a s i c.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
64
TIME MACHINE INITIALISATION
This function is to reset the Recorded TV, Photo list, Music list and Movie List in HDD.
TIME MACHINE
Move
OK
Initialising will delete all existing data.
Time Machine Mode : On
Press Yes to start Time Machine initialisation.
!
Recording Quality
GUIDE
REC. LIST
SCHEDULE
RECORD
: High
Time Machine Initialisation
Yes
No
USB Device Initialisation
DivX Reg.Code
Deactivation
1
2
MENU
OK
INPUT
SIMPLINK
TV SETUP
DVR
MULTIMEDIA
Select T V S E T U P.
Select T I M E M A C H I N E.
3
OK
4
Select T i m e M a c h i n e I n i t i a l i s a t i o n .
OK
Select Y e s.
Start the Time Machine Initialization.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
! NOTE
G
When timeshift is off, Time Machine Initialisation and USB Device Initialisation will be disabled.
65
DVR
TO USE THE INTERNAL HARD DISK
You can play the photo, music and movie saved on the internal hard drive.
Recorded TV
GUIDE
REC. LIST
SCHEDULE
RECORD
MULTIMEDIA
INPUT
SIMPLINK
TV SETUP
DVR
1
MENU
OK
Select R E C . L I S T.
Photo/Music/Movie List
GUIDE
REC. LIST
SCHEDULE
RECORD
PHOTO LIST
MULTIMEDIA
1
66
MENU
INPUT
OK
SIMPLINK
TV SETUP
Select M U L T I M E D I A.
MUSIC LIST
MOVIE LIST
USB
Entry Modes
When you connect a USB device, this screen is displayed automatically.
In USB device, you can not add a new folder or delete the existing folder.
1 Connect the USB device to the U S B
IN
USB IN
jacks on the side of TV.
When removing the USB device
Select U S B P H O T O L I S T, U S B
M U S I C L I S T or U S B M O V I E L I S T.
USB PHOTO LIST USB MUSIC LIST
3
USB MOVIE LIST
Select the U S B D e v i c e menu before removing the
USB device.
1Q. MENU
2
OK
DVR
2
Select U S B D e v i c e.
Select E j e c t .
OK
67
DVR
Precautions when using the USB device
G
G
G
G
G
G
G
DVR
G
G
G
G
G
G
68
Only a USB storage device is recognizable.
If the USB storage device is connected through a
USB hub, the device is not recognizable.
A USB storage device using an automatic recognition program may not be recognized.
A USB storage device which uses its own driver
may not be recognized.
In case of a card reader, up to four memory cards
are concurrently recognizable.
The recognition speed of a USB storage device
may depend on each device.
Please do not unplug the power cord, turn off
with the AC power control switch (or
(power) button) on the TV or with remote control or unplug the USB device when the connected USB storage device is working. When
such device is suddenly separated or unplugged,
the stored files or the USB storage device may
be damaged.
Only use a USB storage device which has normal
music files, image files or movie files.
Please use only a USB storage device which was
formatted as a FAT16, FAT32 or NTFS file system
provided with the Windows operating system. In
case of a storage device formatted as a different
utility program which is not supported by
Windows, it may not be recognized.
Please connect power to a USB storage device
which requires an external power supply. If not,
the device may not be recognized.
Please connect a USB storage device with cable is
offered by USB maker. If connected with cable is
not offered by USB maker or an excessively long
cable, the device may not be recognized.
Some USB storage devices may not be supported
or operate properly.
The TV will display up to 128 characters of a files
name.
Please backup important files because data on
USB device may be damaged. Data management
is consumer's responsibility and as a result, the
manufacturer does not cover data damage.
G The recommended capacity is 1TB or less for a
USB HDD and 40GB or less for USB memory.
Any device with more than the recommended
capacity may not work properly.
G Playing a movie via a USB connection that doesn’t support high speed may not work properly.
G USB storage devices below USB 2.0 are supported as well. But they may not work properly in the
movie list.
G If the USB HDD does not have an external power
source, the USB device may not be detected. So
be sure to connect the external power source.
Please use a power adaptor for an external power
source. We do not guarantee an USB cable for an
external power source.
G In case of USB HDD Having bad sector, Time
Machine may not work.
G Please use the Remove USB device menu of
quick menu to detach safely a USB device from
the TV.
G Before removing the USB device, please use the
Remove USB Device in Quick Menu to prevent software, data loss or damage to USB HDD.
G Please maintain the stability of external HDD by
using the HDD benchmarking tool in order to
guarantee smooth action of HDD.
G The HDD benchmarking tools is checking the
performance of HDD that is read/write rate,
access time, stability. It will be able to search at
website and use easily it after download the
HDD benchmarking tool.
G
1 Connect the USB device to the U S B
I N jacks on the side of TV.
USB IN
USB Recorded List
USB HDD (over 40 GB)
2 To use the USB device (over 40 GB) for USB Backup, execute U S B
D e v i c e I n i t i a l i s a t i o n.
It initializes the HDD connected to the USB as disk mode for backup.
A It is activated only when the USB HDD available for backup is connected.
A When U S B D e v i c e I n i t i a l i s a t i o n is executed, all the data stored in the USB device is deleted.
A While performing U S B D e v i c e I n i t i a l i s a t i o n, do not remove the USB device. It may cause error on
the TV and the storage device.
A
TIME MACHINE
Time Machine Mode : On
Recording Quality The: Time
HighMachine-formatted storage device
GUIDE
REC. LIST
SCHEDULE
Move
INPUT
1 MENU
2
3
4
SIMPLINK
Yes
TV SETUP
SD
15h 52m
No
Select TV SETUP.
OK
Select TIME MACHINE.
! NOTE
Select U S B D e v i c e
I n i t i a l i s a t i o n.
OK
OK
OK
Select Y e s.
• When Y e s is selected, a popup notice appears con-
taining a message to initialize the connected USB
HDD.
• When initialization is complete, a popup notice of
completion is displayed and the connected USB
HDD is available for backup.
3
Formatted capacity
HD 6h 20m /
DVR
Deactivation
MULTIMEDIA
OK
!
Time Machine Initialisation
is connected.
USB recording list is available.
USB Device Initialisation
Press OK to start USB Device initialisation.
DivX Reg.Code
RECORD
MENU
4
RED
OK
OK
Depending on the capacity of the USB
device, the initialization time may vary.
G The initialized USB device only operates
in the U S B R e c o r d e d L i s t.
G The initialized USB device is not recognized by the PC.
G When a USB device of less than 40 GB is
connected, the USB Device Initialisation
is not activated.
G Supported maximum external HDD size
for back-up is up to 1TB.
G
Select R E C . L I S T.
Select USB device.
69
DVR
RECORDED LIST
You can view the recorded programme list at a glance.
The recorded programme stored in the internal HDD or the USB device can be played.
Recorded TV
None Selected
46h 23m
THE GARDEN GURUS SINGAPORE SPECIAL
01m
No Information
1m
23h 11m
13 Feb. 2009
1m
3 Mar. 2009
1m
3 Mar. 2009
Mona The Vampire
7m
3 Mar. 2009
The Wild Thornberrys
1m
3 Mar. 2009
PopUp Menu
P
Page Change
MARK Marked
[Use of remote control]
3 Mar. 2009
No Information
Move
Move to the desired scene and
play the recorded programme.
Free Space 203GB
Page 1/2
Play
Show the popup
menu.
OK
Exit
P
P
A
G
E
P
P
A
G
E
Change Device
DVR
MARK
FAV
1
MENU
2
RED
OK
Move to last Item in next page. (First,
it moves to last item in current page.)
Move to first item in previous page.
(First, it moves to first item in current
page.)
Check and un-check recorded programmes.
Select R E C . L I S T.
Select internal HDD or USB device.
3
Select a recorded programme.
• Press the R E T U R N button to return to normal TV viewing.
! NOTE
If there is a bad sector in the disk, part or all of the items of the R e c o r d i n g l i s t can be deleted.
G Maximum number of recordings within the Recording list is 200. When the number of recordings in the
Recording list is 200, you cannot record any more.
G When the full duration of the recording is played back, the screen will stay in the stopped condition for
10 seconds and then automatically end the playback.
G
G
The recording can be played back even during the recording/reserved recording.
G
During the playback of the recording, the hard disk can generate a certain level of noise.
This noise is irrelevant from the performance and reliability of the product and is normal
for a hard drive to have a certain level of noise.
G
70
The recording time will be different according to the recording quality.
- HD(High Definition) : Max. 23 hours
- SD(Standard Definition) : Max. 46 hours when the recording quality is the best, and when it is at the High state.
Max. 57 hours. When it is the Basic, Max. 77 hours
Recorded programme Selection and Popup Menu
Recorded TV
Free Space 203GB
Page 1/2
None Selected
46h 23m
Recorded TV
23h 11m
THE GARDEN GURUS SINGAPORE SPECIAL
01m
13 Feb. 2009
No Information
1m
3 Mar. 2009
1m
3 Mar. 2009
Free Space 203GB
Page 1/2
None Selected
46h 23m
THE GARDEN GURUS SINGAPORE SPECIAL
01m
No Information
1m
23h 11m
90 2009
13
Feb.
17:09 ~ 17:57
Play
1m
Play Previous
3 Mar. 2009
Mark All
3 Mar. 2009
Delete
No Information
1m
3 Mar. 2009
No Information
Mona The Vampire
7m
3 Mar. 2009
Mona The Vampire
The Wild Thornberrys
1m
3 Mar. 2009
Mar. 2009
1m Copy3 to
USB
3 Mar. 2009
7m Rename
The Wild Thornberrys
1m Close3 Mar. 2009
Move
PopUp Menu
P
Page Change
MARK Marked
Play
Change Device
Exit
Move
PopUp Menu
P
Page Change
Play
MARK Marked
Exit
Change Device
P l a y : Playback of selected recorded programme.
P
G l a y P r e v i o u s : Resumes playing at the previously stopped point.
G M a r k A l l : Mark all recorded programmes in the list.
G U n m a r k A l l : Change marked recorded programmes to
unmarked recorded programmes.
G D e l e t e : Delete the selected recorded programmes.
G C o p y t o U S B(Only in the internal HDD) : Copies the recorded
programme in the internal HDD to the USB device.
It is activated only when a USB HDD available for backup is
connected.
G R e n a m e : Edit recorded programme title.
G C l o s e : Close the pop-up menu.
G
OK
RED
DVR
1
Copying to the USB device. (1/1)
Close
Copying suspended
CHAR/NUM
SYMB
DELETE
@:/
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
*
.,?!
#
OK
Cancel
Select internal HDD or USB device.
2
Select a desired recorded programme.
3
4
OK
Show the Popup menu.
OK
Select the desired Popup menu.
• Press the R E T U R N button to return to normal TV viewing.
71
DVR
Playing Recorded programmes
You can play a selected programme from the recorded list.
1
Play a recorded programme.
When you press the
button during the playback, the information of the recorded programme you are current watching will be displayed at the top of the screen and a progress bar showing the current status of the
playback at the bottom of the screen. (Playback status is displayed as follows.)
A To remove the progress bar, press the
button.
OK
OK
1
5
✜
Recorded
TV
Delayed
Play
2
3
4
1
Preview
2
Current Status
3
Current operating function
DVR
Playback
Fast forward
Rewind
Pause
4
Current playback progress time of the
recorded content
5
Total playback time of the recorded content
Direct view +
Direct view -
Start repeat interval
By one screen
Slow playback
Repeating interval
End repeat interval
Use of remote control
You can adjust various method during the recorded programme play.
During playback,
repeatedly, press the R E W ( FF) or F F( GG) button to speed up.
A Every time you press the button, the search speed will increase by stage. (up to 5 stages)
CONTROL
TIME
CONTROL
TIME
During playback, press the P a u s e( I I ) button.
A Pause screen is displayed.
A Every time you press the P a u s e ( I I ) button from the pause screen, it will
move screen by screen. (II IG )
A Press the P a u s e( I I) button and then use the F F (GG) button for slow motion. ( I G )
A If you don’t press any button 10 minutes after the pause, it will return to the playback.
OK
STOP
When you move the cursor using the Time Machine (< , > ) button during playback, and then press the O K button, the screen will directly play at the applicable screen where the cursor is located. (
,
)
When you press the L I V E button, the playback will end and you can watch the TV.
LIVE
REPEAT
72
* This function is available only the playback of a recorded programme.
Press the R E P E A T button at the starting point where you want to set the
Interval repeat and press it again at the ending point. To cancel the playback
for the interval repeat, press the R E P E A T button one more time.
A The start of the Interval repeat is displayed as
and end of the Interval repeat
as in the recording progress bar at the bottom of the screen. Start and end of the Interval repeat can be set both in forward and reverse direction.
A Interval shorter than 10 seconds cannot be set.
A When the Interval repeat is cancelled, it will return to normal playback from
the end point of the interval.
To return to normal playback, press the P L A Y(G) button.
! NOTE
G
The screen saver feature runs when the moving, deleting or copying operation of a photo, music or movie
file continues for a long time.
PHOTO LIST
You can view .JPG files from the internal HDD or USB devices.
The On Screen Display on your model may be slightly different.
PHOTO(*.JPEG) supporting file
Baseline: 64 x 64 ~ 15360 x 8640
• You can play JPEG files only.
• This TV will not be able to decode some JPG images saved using the progressive option.
• Non-supported files are displayed in the form of bitmap.
• When you are watching the photo by the P h o t o L i s t function, you can not change the picture mode.
REC. LIST
SCHEDULE
PHOTO LIST
RECORD
MUSIC LIST
MOVIE LIST
USB MUSIC LIST
USB MOVIE LIST
DVR
GUIDE
or
MULTIMEDIA
1 MENU
2
OK
INPUT
SIMPLINK
USB PHOTO LIST
TV SETUP
Select M U L T I M E D I A.
Select P H O T O L I S T or U S B P H O T O L I S T.
Screen Components
5
3
1
2
Moves to upper level folder
Preview: Display the
thumbnail/folder name of
the photo in the selected
folder
3
Current page/Total pages
4
Total number of marked photos
5
Available HDD space
4
PHOTO LIST
Page 1/1
HDD storage device
Free Space 9GB
None selected
My Photo
Photo1
Photo1
2
1
2Folders, 4Files
1
Up Folder
(Only in the internal HDD)
6
Corresponding buttons on
the remote control
Navigation
PopUp Menu
Folder Menu
Change Device
6
3
RED
OK
Select internal HDD or USB device.
P
Page Change
MARK
Mark
MUSIC LIST
Exit
MOVIE LIST
(Only in the internal HDD)
73
DVR
Photo Selection and Popup Menu
PHOTO LIST
Page 1/1
None selected
My Photo
Photo1
Photo1
2Folders, 4Files
Up Folder
Navigation
PopUp Menu
Change Device
DVR
PHOTO LIST
Page Change
P
Folder Menu
MARK Mark
Exit
MUSIC LIST
Page 1/1
None selected
Up Folder
Photo
MOVIE LIST
photo
Butterfly
X.Box
1366x768
125KB
View
Mark All
Delete
1366x768 125KB
Copy to HDD
Up Folder
Navigation
Close
PopUp Menu
Change Device
1
P
Page Change
Folder Menu
MARK Mark
MUSIC LIST
Exit
MOVIE LIST
When you select a file (not folder), this PopUp
menu is displayed.
G V i e w: Display the selected item.
G Mark All: Mark all photos on the screen.
G U n m a r k A l l: Deselect all marked photos.
G M o v e (Only in the internal HDD) :Move to the
desired folder in the internal HDD.
G D e l e t e : Delete the selected photo item
(except NTFS file system).
G D e l e t e M a r k e d : Delete the marked photo
item(except NTFS file system)
G C o p y t o H D D(Only in the USB device): Copy the
selected photo to the internal HDD.
G C l o s e: Close the pop-up menu.
Select the target folder or drive.
■
2
3
4
74
OK
OK
Select the desired photos.
Show the Popup menu.
OK
Select the desired Popup menu.
Use the P
button to navigation in the
photo page.
■ Use the M A R K button to mark or unmark a
photo. When one or more photos are marked,
you can view individual photos or a slide show
of the marked photos. If no photos are marked,
you can view all photos individually or all photos in the folder in a slide show.
Full Screen Menu
You can change the Photo List view so that it fills the screen. More operations are available in full
screen mode.
PHOTO LIST
Page 1/1
None Selected
My Photo
Photo1
Photo1
2Folders, 4Files
Up Folder
Navigation
PopUp Menu
PHOTO LIST
Page Change
P
MARK Mark
Exit
MUSIC LIST
Folder Menu
MOVIE LIST
DVR
Change Device
None Selected
Page 1/1
photo
Butterfly
Up Folder
Photo
X.Box
1366x768
125KB
View
Mark All
Delete
1366x768 125KB
Copy to HDD
Up Folder
Navigation
Close
PopUp Menu
Change Device
P
Page Change
Folder Menu
MARK Mark
Slideshow
MUSIC LIST
1/17
Loading...
Exit
BGM
Delete
Option
Hide
MOVIE LIST
The aspect ratio of a photo may change the size of
the photo displayed on the screen in full size.
1
2
3
Select the target folder or drive.
OK
OK
4
5
Select the desired photos.
Show the Popup menu.
Select V i e w.
■
OK
The selected photo is displayed in
full size.
Use the P
photo page.
button to navigation in the
75
DVR
6
OK
Select the Slideshow, B G M,
D e l e t e, Option, or Hide.
(Rotate),
■
1/17
Loading...
Slideshow
BGM
Delete
Option
Hide
Use
button to select the previous or
next photo.
■ Use
button to select and control
the menu on the full-sized screen.
DVR
S l i d e s h o w: Selected photos are displayed during the
slide show. If no photo is selected, all photos in the current folder are displayed during slide show.
■ Set the time interval of the slide show in O p t i o n.
G B G M: Listen to music while viewing photos in full size.
■ Set the BGM device and folder in O p t i o n.
( R o t a t e ): Rotate photos.
G
■ Rotates the photo 90°, 180°, 270°, 360° clockwise.
G D e l e t e: Delete a photo.
G O p t i o n: Set values for S l i d e S p e e d, B G M D e v i c e
and B G M F o l d e r.
■ Use
button and O K button to set values. Then
go to OK and press O K to save the settings.
■ You cannot change B G M F o l d e r while BGM is playing.
OK
G H i d e : Hide the menu on the full-sized screen.
■ To see the menu again on the full-sized screen, press
O K button to display.
G
76
Press F G to set the time interval between slides.
Slide Speed
Fast
BGM Device
USB
BGM Folder
...
OK
Cancel
MUSIC LIST
You can use the Music List menu to play MP3 files form.
This TV cannot play back copy-protected files.
The On Screen Display on your model may be slightly different.
Supported music file: *.MP3
Bit rate range 40Kbps ~
320Kbps
• Sampling rate (Sampling
Frequency)
GUIDE
REC. LIST
MPEG1 : 32, 44.1, 48KHz
MPEG2 : 16, 24, 22.05KHz
SCHEDULE
PHOTO LIST
PHOTO
LIST
RECORD
MUSIC LIST
MUSIC
LIST
MOVIE LIST
MOVIE
LIST
USB MUSIC LIST
USB MOVIE LIST
MULTIMEDIA
1 MENU
2
OK
INPUT
SIMPLINK
USB PHOTO LIST
TV SETUP
DVR
or
Select M U L T I M E D I A.
Select M U S I C L I S T or U S B M U S I C L I S T .
Screen Components
5
3
1
2
Moves to upper level folder
MUSIC LIST
Page 1/1
Preview: If any album jacket
for the file exists, this jacket is displayed.
3
Current page/Total pages
4
Total number of marked music
5
Available HDD space
Title
Music1
0 folder, 4 file(s)
Corresponding buttons on
the remote control
Up Folder
Navigation
PopUp Menu
Change Device
OK
P
Folder Menu
6
RED
Play Time
2
1
3
HDD storage device
Free Space 9GB
None Selected
My Music
Music1
(Only in the internal HDD)
6
4
Page Change
MARK
Mark
PHOTO LIST
Exit
MOVIE LIST
(Only in the internal HDD)
Select internal HDD or USB device.
77
DVR
Music Selection and Popup Menu
Up to 6 music titles are listed per page.
MUSIC LIST
Page 1/1
None Selected
My Music
Title
Music1
Play Time
Music1
0 folder, 4 file(s)
Up Folder
Navigation
PopUp Menu
Change Device
Page Change MARK Mark
P
Folder Menu
Exit
MOVIE LIST
PHOTO LIST
DVR
MUSIC LIST
Page 1/1
None Selected
Drive1
Title
Play Time
3945
KB
128 Kbps
Arirang
Up Folder
Play
Arirang
Play with Photo
Good Bye
Mark All
Delete
3945 KB, 128 Kbps
Copy to HDD
Up Folder
Navigation
Close
PopUp Menu
Change Device
1
2
3
P
Page Change MARK Mark
Folder Menu
OK
4
Exit
MOVIE LIST
Select the desired music.
Show the Popup menu.
OK
Select the desired Popup menu.
5
RETURN
78
PHOTO LIST
Select the target folder or drive.
OK
Return to TV viewing
P l a y (During stop): Play the selected music.
Once a song finishes playing, the next selected
one will be played. When there is are no selected music to play, the next one in the current
folder will be played. If you go to a different
folder and press the O K button, the current
music in playback will stop.
G S t o p P l a y (During playback): Stop the playing music.
G P l a y w i t h P h o t o: Start playing the selected
music and then move to the Photo List.
G M a r k A l l: Mark all music in the folder.
G U n m a r k A l l: Deselect all marked music.
G M o v e (Only in the internal HDD): Move to the
desired folder in the internal HDD.
G D e l e t e: Delete the selected music.
G D e l e t e M a r k e d : Delete the marked music
item(except NTFS file system)
G C o p y t o H D D(Only in the USB device): Copies the
selected music to the internal HDD.
G C l o s e: Close the pop-up menu.
G
■
Use the P
button to navigation in the
music page.
■ Use M A R K button to mark or unmark a music
file. If no music is marked, all the music in the
folder will be played in sequence. When one or
more music files are marked, the marked music
files will be played in sequence. If you want to
listen to only one song repeatedly, just mark
that one file and play.
■
The play information box (as shown below) will automatically
move across the screen when there is no user input to prevent a fixed image remaining on the screen for a extended
period of time.
DVR
! NOTE
G
G
G
G
G
When music is playing,
is displayed in front of the music play time.
A damaged or corrupted music file that does not play displays 00:00 as the play time.
Music files with copy-protection will not play.
Press O K, A , or R E T U R N button to stop the screen saver.
This TV can not play music files less than 16 Kbytes.
79
DVR
MOVIE LIST
The movie list is activated once HDD or USB devices are detected.
It is used when playing movie files on TV.
Displays the movies in the HDD or USB devices and supports play.
Allows playback of all movies in the folder and user desired files.
It is a movie list that displays folder information and Divx file.
DVR
GUIDE
REC. LIST
SCHEDULE
RECORD
MULTIMEDIA
INPUT
SIMPLINK
TV SETUP
PHOTO LIST
USB PHOTO LIST
1 MENU
2
OK
MUSIC LIST
MOVIE LIST
USB MUSIC LIST
USB MOVIE LIST
or
Select M U L T I M E D I A.
Select M O V I E L I S T or U S B M O V I E L I S T.
Screen Components
5
3
1
2
Moves to upper level folder
Current page/Total pages
4
Total number of marked
movies
5
MOVIE LIST
Page 1/1
Preview: Selected movies are
played at X4 speed. And
sound is mute.
3
Available HDD space
4
HDD storage device
Free Space 9GB
None Selected
My Movie
Title
Play Time
Movie1
Movie1
2
0 folder, 4 file(s)
1
Up Folder
(Only in the internal HDD)
6
Corresponding buttons on
the remote control
Navigation
PopUp Menu
Change Device
6
3
RED
80
OK
P
Folder Menu
Select internal HDD or USB device.
Page Change
MARK
Mark
PHOTO LIST
(Only in the internal HDD)
Exit
MUSIC LIST
Movie Selection and Popup Menu
Up to 6 movie titles are listed per page.
MOVIE LIST
Page 1/1
HDD storage device
Free Space 9GB
No Marked
USB
Title
Play Time
Drive1
Drive1
folder 8, file 0
Up Folder
Navigation
PopUp Menu
Change Device
P
Page Change MARK Mark
Folder Menu
Exit
MUSIC LIST
PHOTO LIST
P l a y (During stop): Play the selected movie.
Once a movie finishes playing, the next selected
one will be played. When there are no selected
movies to play, the next one in the current folder
and will be not played. While playing the movie,
activating the movie list will stop playing the
movie. If you go to a different folder and press the
O K button, the current movie in playback will stop.
G M a r k A l l: Mark all movies in the folder.
G U n m a r k A l l: Deselect all marked movie.
G M o v e(Only in the internal HDD): Move to the desired
folder in the internal HDD.
D
G e l e t e: Delete the selected movie.
G C o p y t o H D D(Only in the USB device): Copy the
selected movie to the internal HDD.
G C l o s e: Close the pop-up menu.
G
Page 1/1
HDD storage device
Free Space 9GB
No Marked
Movie
Title
Scent of a waman. (1992)
320 x 250
668 MB
Up Folder
Play
Scent of a waman. (1992)
Lost
Mark All
Delete
Copy to HDD
320 x 250 668 MB
Close
Up Folder
Navigation
PopUp Menu
Change Device
1
2
P
Folder Menu
Page Change MARK Mark
PHOTO LIST
Exit
MUSIC LIST
DVR
MOVIE LIST
Select the target folder or drive.
Select the desired movies.
OK
■
3
4
OK
Show the Popup menu.
OK
Select the desired Popup menu.
Use the P
button to navigate in the
movie page.
■ Use M A R K button to mark or unmark a movie
file. When one or more movie files are marked,
the marked movie files will be played in
sequence.
81
DVR
Playing the Movie
You can adjust various method during the movie play.
MOVIE LIST
Page 1/1
HDD storage device
Free Space 9GB
None Selected
My Movie
Title
Play Time
Movie1
Movie1
704 x 396 668 MB
Up Folder
Navigation
PopUp Menu
Change Device
P
Move Page
Folder Menu
MARK Mark
Exit
MUSIC LIST
PHOTO LIST
Display the DivX Banner in the top
of the screen.
DVR
MOVIE LIST
Page 1/1
None Selected
Movie1
HDD storage device
Free Space 9GB
Title
Scent of a waman. (1992)
Scent of a woman (1992).
HDD
Play Time
320 x 250
668 MB
Up Folder
320 x 250
Play
:
MPEG4
MPEG4 / AP3
MP3
22:13:20
Scent of a waman. (1992)
Mark All
Lost
✱✶✯❀✘✼❃✻
Move22:30:20
Delete
320 x 250 668 MB
Close
Up Folder
Navigation
PopUp Menu
Change Device
3
4
Move Page
MARK Mark
PHOTO LIST
Exit
Option
MUSIC LIST
[Use of remote control]
1
2
P
Select the target folder or drive.
OK
Press the R E W( FF) button to rewind.
Press the F F( GG) button to forward fast.
Press the P a u s e( I I) button to pause the
screen.
Select the desired movies.
STOP
OK
OK
Press the S t o p( A) button to stop.
Show the Popup menu.
,
LIVE
Press the P a u s e ( I I) button and then use
the F F (GG) button for slow motion.
Select P l a y.
! NOTE
G
5
82
Some special files are not supported in subtitles.
OK
Display the current movie status progress bar
in the bottom of the screen.
Option Menu Selection
During the movie play, the following options are available.
P i c t u r e S i z e: Select the Full screen or Original size.
G A u d i o: Select the language.
But, the file with only one audio can not be selected.
G S u b t i t l e: The subtitle can be turned on or off.
If there are two or more subtitles, you can select one of them.
G
Picture Size
F
G
Audio
Subtitle
Subtitle Language
• Sync
• Position
English, Spanish, French, German
Latin1
Close
Support Language
S y n c: Adjusts the time synchronisation of the subtitle from -10
secs ~ +10 secs by steps of 0.5 secs during movie play.
• P o s i t i o n: Changes the position of the subtitle either up or down
during movie play. Select position from -2 secs ~ +2 secs by steps
of 1 secs during movie play.
•
8
6
RED
Make appropriate adjustments.
Display the O p t i o n menu.
Select the desired movie option.
9
OK
Select C l o s e.
DVR
7
Precautions when playing the DivX
Subtitle format : * . s m i / * . s r t / * . s u b ( M i c r o D V D, S u b V i e w e r 1 . 0 / 2 . 0 ) / * . a s s /
* . s s a / * . t x t ( T M P l a y e r ), * . p s b ( P o w e r D i v x )
Maximum supported DivX bitrate : 2 0 M b p s ( M e g a b i t p e r s e c o n d )
Audio supported bit rate : within 32~320 kbps(MP3)
Maximum supported display resolution : 1920 x1080
G Specific subtitles created by the user may not be operated normally.
G Some special characters are not supported in subtitles.
G HTML tags are not supported in subtitles.
G Subtitles in languages other than the supported languages are not available.
G Time information in an external subtitle file should be arranged in ascending order to be played.
G Damaged movie files may not be played, and certain functions could be limited during the playback.
G Playback for movie file exceeding 30GB (Giga Byte) is not supported.
G If the video and audio structure of recorded file is not interleaved, either video or audio is outputted.
G H.264/ AVC codec is supported up to profile level 4.1.
G Files encoded with GMC(Global Motion Compensation) or quarter pel motion estimation may not be played.
G The video file and the subtitle file must be located in the same folder.
G The name of the video file and the subtitle file must be the same to view the subtitles normally.
G Even the supported codec may not be played depending on the encoded condition.
G Files had with not index may not be operated normally.
G Only the files saved in ASCll CODE is supported for the external subtitles of the movie.
G A subtitle of font , size and position may be not changed.
G Only 150 alphabets and 150 numbers are supported for each line of the subtitle.
G Subtitles are displayed up to 5 lines on the screen.
G An abnormal picture(still, fast) or an audio mute for a while may be occured in case of change the audio language.
G Depend on the packet structure of video or audio files, it may support only audio or video.
G when some frame in a movie file have higher resolution than maximum supporting resolution, it may not guarantee smooth playback.
G It may not guarantee some playing movie files except for specified format .
G DTS Audio codec is not supported.
G Some file format which are *.ts, *.trp, *.tp, *.mpe, *.mpeg, *.mpe doesnot support trick mode except for GG.
G Trick play except for GG is not available when the movie file has not index information.
G Some movie files having special character may not playback.
G When you are watching the movie by M o v i e L i s t function, you can adjust an image by E N E R G Y S A V I N G
and A V M O D E key on the remote control. User setup for each image mode does not operate.
83
DVR
Supported Movie File
File Extensions
A/V
Codec
Profile/Level Support
Advanced Profile@Level 3(e.g. 720p60, 1080i60, 1080p30)
Only streams compliant to SMPTE 421M VC-1 standard are supported.
Simple Profile@Medium Level (e.g. CIF,QVGA)
VC-1 Simple and Main
Main Profile@High Level (e.g. 1080p30)
Profiles
Only streams compliant to SMPTE 421M VC-1 standard are supported.
VC-1 Advanced Profile
.asf
.wmv
.wma
Video
Audio
WMA Standard
WMA 9 Professional
Video
.divx
.avi
Audio
DVR
.mp4
.m4a
.m4v
Divx3.11
Divx4
Divx5
Divx6
XViD
MPEG-1Layer I, II
MPEG-1 Layer III(MP3)
AC-3
H.264 / AVC
Main Profile@ Level 4.1
High Profile@ Level 4.1
(e.g. 720p60, 1080i60, 1080p30)
MPEG-4 Part 2
Advanced Simple Profile (720p/1080i)
Audio
AAC
AAC-LC and AAC-HE
Video
H.264 / AVC
Audio
AAC
AC-3
Video
.mkv
.ts
.trp
.tp
Video
Audio
Video
.vob
Audio
.mpg
.mpeg
.mpe
84
Advanced Simple Profile(720p/1080i)
H.264 / AVC
MPEG-2
MPEG-1Layer I, II
MPEG-1 Layer III(MP3)
AC-3
AAC
MPEG-1
MPEG-2
AC-3
LPCM
MPEG-1 Layer I, II
Video
MPEG-1
Audio
MPEG-1Layer I, II
Main Profile@ Level 4.1
High Profile@ Level 4.1(e.g. 720p60, 1080i60, 1080p30)
AAC-LC and AAC-HE
Main Profile@ Level 4.1
High Profile@ Level 4.1(e.g. 720p60, 1080i60, 1080p30)
Main Profile@High Level(e.g. 720p60, 1080i60)
AAC-LC and AAC-HE
Main Profile@High Level (e.g. 720p60, 1080i60)
Only streams compliant configured properly for TS, PS or ES
DIVX REGISTRATION CODE
Confirm the DivX registration code number of the TV.
Using the registration number, movies can be rented or purchased at www.divx.com/vod.
TIME MACHINE
Move
OK
Time Machine Mode : On
DixX(R) Video On Demand
Recording Quality
GUIDE
REC. LIST
SCHEDULE
RECORD
: High
Your Registration Code is : xxxxxxxxxx
Time Machine Initialisation
To learn more visit www.divx.com/vod
USB Device Initialisation
DivX Reg.Code
Deactivation
MULTIMEDIA
2
MENU
OK
SIMPLINK
TV SETUP
DVR
1
INPUT
Close
Select T V S E T U P.
Select T I M E M A C H I N E.
3
OK
4
OK
C o d e.
Select D i v X R e g.C
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
“DivX Certified to play DivX video up to HD 1080p, including premium content”
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an
official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in
order to play DivX Video-on-Demand (VOD) content. To generate the registration
code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com with
this code to complete the registration process and learn more about DivX VOD.
! NOTE
With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed.
(Only DivX files matched with the registration code of the purchased TV are playable.)
G The video or audio of a file converted based on a standard other than the DivX codec standard may be
corrupted or unable to be played.
G
85
DVR
DEACTIVATION
The purpose of deactivation is to allow deactivation of devices for users who have activated all the available
devices through the web_server and are blocked from activating more devices. DivX VOD allowed the consumer
to activate up to 6 devices under one account, but to replace or deactivate any of those devices, the consumer
had to contact DivX Support and request deletion. Now with this added feature, consumers will be able to deactivate the device themselves and hence better manage their DivX VOD devices.
GUIDE
REC. LIST
SCHEDULE
RECORD
MULTIMEDIA
INPUT
SIMPLINK
TV SETUP
DVR
TIME MACHINE
Move
OK
Time Machine Mode : On
Recording Quality
: High
Time Machine Initialisation
USB Device Initialisation
DivX Reg.Code
i
Do you want to deactivate your device?
Deactivation
Yes
1
2
MENU
OK
i
DivX(R) Video On Demand
No
DivX(R) Video On Demand
This device is deactivated.
Your deactivation code is: xxxxxxxxxx
To learn more visit www.divx.com/vod.
Close
Select T V S E T U P.
Select T I M E M A C H I N E.
3
OK
Select D e a c t i v a t i o n.
OK
Select Y e s.
4
5
OK
Display D e a c t i v a t i o n.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
86
PICTURE CONTROL
PICTURE SIZE (ASPECT RATIO) CONTROL
You can watch the screen in various picture formats; 16:9, Just Scan,
Original, 4:3, 14:9 and Zoom and Cinema Zoom.
If a fixed image is displayed on the screen for a long time, that fixed image
may become imprinted on the screen and remain visible.
You can adjust the enlarge proportion using
button.
This function works in the following signal.
Select A s p e c t R a t i o.
2
• You can also adjust Aspect Ratio in the P I C-
T U R E menu.
• For Zoom Setting, select 14:9, Zoom and
Select the desired picture format.
• 16:9
The following selection will allow you to
adjust the picture horizontally, in linear
proportion, to fill the entire screen(useful for
viewing 4:3 formatted DVDs)
Cinema Zoom in Ratio Menu. After completing
Zoom Setting, the display goes back to Q.Menu.
PICTURE CONTROL
1Q. MENU
• Original
When your TV receives a wide screen signal it
will automatically change to the picture
format broadcast.
Original
• Just Scan
Following Selection will lead to you view the
picture of best quality without loss of original
picture in high resolution image.
Note : If there are noise in original Picture,
You can see the noise at the edge.
• 4:3
The following selection will allow you to view
a picture with an original 4:3 aspect ration,
gray bars will appear on both the left and
right of the screen.
87
PICTURE CONTROL
• 14:9
You can view a picture format of 14:9 or a
general TV programme in the 14:9 mode. The
14:9 screen is viewed in the same way as in
4:3, but is magnified to the left and right.
• Cinema Zoom
Choose Cinema Zoom when you want to
enlarge the picture in correct proportion.
Note:When enlarging or reducing the picture,
the image may become distorted.
PICTURE CONTROL
• Zoom
The following selection will allow you to view
the picture without any alteration, while filling
the entire screen. However, the top and
bottom of the picture will be cropped.
! NOTE
G
G
G
G
88
You can only select 4 : 3, 1 6 : 9 (Wide), 1 4 : 9, Z o o m / C i n e m a Z o o m in Component mode.
You can only select 4 : 3, Original, 1 6 : 9 (Wide), 1 4 : 9, Z o o m / C i n e m a Z o o m in HDMI mode.
You can only select 4 : 3, 1 6 : 9 (Wide) in RGB/HDMI PC mode only.
In DTV(over 576p)/HDMI/Component (over 720p) mode, J u s t S c a n is available.
PICTURE WIZARD
This feature lets you adjust the picture quality of the original image.
Use this to calibrate the screen quality by adjusting the Black and White Level etc. You can calibrate the screen
quality by easily following each step.
When you adjust the image to L o w, R e c o m m e n d e d or H i g h, you can see the example of the changes you made.
In RGB-PC/HDMI-PC/DVI-PC mode, the changed Colour, Tint and H/V Sharpness values are not applied.
PICTURE
Move
Aspect Ratio
OK
: 16:9
White Level
Set the screen above identical to the Recommended sample
below.
Picture Wizard
Energy Saving : Intelligent Sensor
Picture Mode
: Vivid
• Contrast 100
• Brightness 50
70
• Contrast
90
High
E
• Colour
Recommended
E
Low
• Sharpness 70
E
2
3
Previous
Select T V S E T U P.
OK
6
Next
OK
Adjust W h i t e L e v e l.
Select P I C T U R E.
Colour
Select P i c t u r e W i z a r d.
OK
Set the screen above identical to the Recommended sample
below.
PICTURE CONTROL
1 MENU
Picture Wizard
Recommended
Previous
G
7
Previous
4
OK
50
E
• Colour
High
E
Low
With Picture Wizard, you can adjust the picture quality of
original image.
Next
OK
Next
Adjust C o l o u r.
Tint
Adjust P i c t u r e W i z a r d.
Set the screen above identical to the Recommended sample
below.
Black Level
Low
Recommended
Recommended
50
E
• Brightness
High
5
Next
OK
G
Previous
8
Previous
R
Next
E
Low
0
E
• Tint
High
E
Set the screen above identical to the Recommended sample
below.
Adjust B l a c k L e v e l.
OK
Adjust T i n t.
89
PICTURE CONTROL
Complete
Horizontal Sharpness
Select (an) input(s) to apply the settings.
Set the screen above identical to the Recommended sample
below.
DTV
TV
AV1
AV2
Low
Recommended
Component1
High
Previous
9
RGB
HDMI1
HDMI2
HDMI3
HDMI4
Next
Warning: The picture quality may vary according to the
signal and kinds of inputs.
Previous
Move
MARK
Mark
Confirm
Vertical Sharpness
Set the screen above identical to the Recommended sample
below.
11
MARK
FAV
✱✶✯❀✘✼❃✻
✱✶✯❀
✼❃✻
Low
Recommended
Previous
50
E
• V Sharpness
High
12
10
Select input source to apply the
settings.
Save.
OK
Next
!
OK
Adjust V e r t i c a l
S h a r p n e s s.
The current adjustment value is saved to Expert1.
Close
13
Finish the Picture Wizard.
OK
■
90
E
E
PICTURE CONTROL
Adjust H o r i z o n t a l
S h a r p n e s s.
OK
E
E
50
E
Component2
• H Sharpness
If you stop the setting before the final
step, the changes will not be saved to
the TV.
ENERGY SAVING
It reduces the TV’s power consumption by lowering the backlight level.
The default factory setting complies with the E n e r g y S t a r requirements and is adjusted to the comfortable level to be viewed at home.
You can increase the brightness of your screen by adjusting the E n e r g y S a v i n g level or by setting the
P i c t u r e M o d e.
PICTURE
Aspect Ratio
Move
OK
: 16:9
Aspect Ratio
Picture Wizard
: Vivid
• Brightness 50
• Sharpness 70
• Colour
70
3
F
Low
• Sharpness Medium
70
Maximum
• Colour
70
E
Select T V S E T U P.
OK
Select P I C T U R E.
OK
Select
4
E n e r g y S a v i n g.
G
Off
• Contrast 100
• BrightnessMinimum
50
• When the Intelligent sensor function is
on, the most suitable picture is automatically adjusted according to the surrounding conditions.
• I n t e l l i g e n t S e n s o r : Adjusts picture
according to the surrounding conditions.
PICTURE CONTROL
E
2
OK
Energy Saving : Intelligent Sensor
Intelligent Sensor
: Vivid
Picture Mode
• Contrast 100
1 MENU
Move
: 16:9
Picture Wizard
Energy Saving : Intelligent Sensor
Picture Mode
PICTURE
Select I n t e l l i g e n t S e n s o r , O f f ,
M i n i m u m , M e d i u m or M a x i m u m.
OK
When the I n t e l l i g e n t S e n s o r is selected,
5
OK
Select L o w, M i d d l e or H i g h .
91
PICTURE CONTROL
PRESET PICTURE SETTINGS
Picture Mode-Preset
PICTURE
Aspect Ratio
Move
PICTURE
OK
: 16:9
Aspect Ratio
Picture Wizard
OK
Picture Wizard
Energy Saving : Intelligent Sensor
Picture Mode
Move
: 16:9
Energy Saving : Intelligent Sensor
Vivid
: Vivid
Standard
• Contrast 100
Cinema
• Brightness 50
Sport
• Sharpness 70
Game
• Colour
70
Expert1
E
: Vivid
Picture Mode
• Contrast 100
• Brightness 50
• Sharpness 70
• Colour
70
E
PICTURE CONTROL
Expert2
1 MENU
2
3
Select T V S E T U P.
OK
Select P I C T U R E.
OK
Select P i c t u r e M o d e.
4
OK
C i n e m a,
Select V i v i d, S t a n d a r d,C
S p o r t, G a m e, E x p e r t 1or E x p e r t 2.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
■
■
■
■
■
■
■
■
■
92
V i v i d, S t a n d a r d, C i n e m a, S p o r t, and G a m e Settings are preset for the optimum picture quality at the
factory.
V i v i d: This is the mode to maximize the effect of the video in the retail store. Strengthen the contrast,
brightness, colour and sharpness for vivid picture.
S t a n d a r d: This is the mode to realize optimum viewing condition for the general user.
C i n e m a: This mode optimizes video for watching movies.
S p o r t: This is the video mode to emphasize dynamic video and primary colour (e.g, white, uniform, grass,
sky blue etc.) by realizing the optimal screen for sports.
G a m e: This is the mode to realize fast response speed in a fast gaming screen.
E x p e r t: This is the mode to adjust the video in detail for video quality expert and general user.
You can also adjust P i c t u r e M o d e in the Q . M E N U.
P i c t u r e M o d e adjusts the TV for the best picture appearance. Select the preset value in the P i c t u r e
M o d e menu based on the programme category.
MANUAL PICTURE ADJUSTMENT
Picture Mode-User option
Contrast
Adjusts the signal level between black and white in the picture. You may use Contrast when the bright part of the picture is saturated.
Brightness
Adjusts the base level of the signal in the picture.
Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Colour
Adjusts intensity of all colours.
Tint
Adjusts the balance between red and green levels.
Aspect Ratio
Move
PICTURE
OK
: 16:9
Aspect Ratio
Picture Wizard
2
3
: Vivid
Picture Mode
• Contrast 100
• Brightness 50
• Brightness 50
• Sharpness 70
• Sharpness 70
• Colour
• Colour
70
Game
Expert1
Expert2
70
E
Select T V S E T U P.
Select P I C T U R E.
OK
Select P i c t u r e M o d e.
OK
Sport
: Vivid
• Contrast 100
OK
4
Standard
Energy Saving : Intelligent SensorCinema
E
1 MENU
OK
Vivid
Picture Wizard
Energy Saving : Intelligent Sensor
Picture Mode
Move
: 16:9
PICTURE CONTROL
PICTURE
C i n e m a,
Select V i v i d, S t a n d a r d,C
S p o r t, G a m e, E x p e r t 1or E x p e r t 2.
5
OK
Select C o n t r a s t, B r i g h t n e s s, S h a r p n e s s,
C o l o u r or T i n t.
• Press the M E N U button to return to normal TV viewing.
OK
Make appropriate adjustments.
6
• Press the R E T U R N button to move to the previous menu screen.
! NOTE
G
G
You cannot adjust colour, sharpness and tint in the RGB-PC mode.
When the E x p e r t 1 / 2 is selected, you can select C o n t r a s t, B r i g h t n e s s, H S h a r p n e s s ,
V S h a r p n e s s, C o l o u r or T i n t .
93
PICTURE CONTROL
PICTURE IMPROVEMENT TECHNOLOGY
You can calibrate the screen for each Picture Mode or set the video value according to the special video screen.
You can set the video value differently for each input.
To reset to the factory default screen after making adjustments to each video mode, execute the “Picture Reset”
function for each Picture Mode.
PICTURE
Move
PICTURE
OK
E
PICTURE CONTROL
• Brightness
OK
E
• Contrast
Move
100
• Contrast
50
• Sharpness
70
• Colour
70
• Tint
0
100
Colour Temperature
F
• Brightness
R
50
Dynamic
Contrast
• Sharpness
70
Dynamic Colour
• Colour
70
Noise Reduction
G
• Tint
0 R
Gamma
• Advanced Control
Black Level
• Reset
G
• Advanced Control
• Reset
Screen
Screen
Film Mode
Medium
G
Off
Off
Off
Medium
Low
Off
E
Close
1 MENU
2
3
Select T V S E T U P.
OK
Select P I C T U R E.
OK
Select A d v a n c e d C o n t r o l.
OK
Select your desired options.
4
5
Make appropriate adjustments.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
94
EXPERT PICTURE CONTROL
E x p e r t 1 and
E x p e r t 2 provide more categories which users can set as
By segmenting categories,
they see fit, offering the optimal picture quality for users.
This may also be used to help a professional optimize the TV performance using specific videos.
PICTURE
Move
PICTURE
OK
Move
OK
E
Aspect Ratio
: 16:9
Dynamic Contrast
• Brightness
50
Noise Reduction
• H Sharpness
50
Picture Wizard
Gamma 50
• V Sharpness
Medium
• ColourBlack Level
50
Auto
• Tint Film Mode0
• ExpertColour
Control
Standard
• Reset
Screen
Expert2
Off
G
Low
Off
HD
0
Colour Gamut
Standard
Edge Enhancer
Off
xvYCC
Auto
E
Close
1 MENU
2
3
Select T V S E T U P.
OK
Select P I C T U R E.
OK
Select P i c t u r e M o d e.
OK
Select
OK
Select E x p e r t C o n t r o l.
OK
Select your desired menu option.
PICTURE CONTROL
Energy Saving : Intelligent Sensor
Vivid
:
Expert1
Standard
• Contrast
100
Cinema
• Brightness
50
Sport
• H Sharpness 50
Game
• V Sharpness 50
Expert1
E
Picture Mode
F
4
E x p e r t 1, or
E x p e r t 2.
5
6
7
Make appropriate adjustments.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
95
PICTURE CONTROL
Colour Temperature
(Warm/Medium/Cool)
■
Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to make picture bluish.
■
Adjusts the contrast to keep it at the best level according to the brightness of the
screen. The picture is improved by making bright parts brighter and dark parts darker.
■
Adjusts screen colours so that they look livelier, richer and clearer. This feature
enhances hue, saturation and luminance so that red, blue, green and white look more
vivid.
Noise Reduction
(Off/Low/Medium/High)
■
Reduces screen noise without compromising video quality.
Gamma
(Low/Medium/High)
■
You can adjust brightness of dark area and middle gray level area of the picture.
• L o w : Make dark and middle gray level area of the picture brighter.
• M e d i u m: Express original picture levels.
• H i g h: Make dark and middle gray level area of the picture darker.
Dynamic Contrast
(Off/Low/High)
Dynamic Colour
(Off/Low/High )
PICTURE CONTROL
Black Level
(Low/High)
■
■
Film Mode
(On/Off)
96
• L o w : The picture of the screen gets darker.
• H i g h : The picture of the screen gets brighter.
• A u t o : Realizing the black level of the screen and set it to High or Low automatically.
■
■
Set black level of the screen to proper level.
This function enables to select 'Low' or 'High' in the following mode: AV(NTSC-M), HDMI
or Component. Otherwise, 'Black level' is set to 'Auto'.
You can watch a cinema-like video by eliminating judder effect.
Use this function when you watch movies.
• S t a n d a r d : Mode to reproduce original colour according to the standard of
Colour Gamut
(Wide/Standard)
input signal independent of the display characteristics.
• W i d e : Mode to use and set the rich colour area of the display.
■ Maximize the utilization for colour area that can be expressed.
■
Shows clearer and distinctive yet natural corners of the video.
xvYCC
(Auto/off/on)
■
This is the function to express richer colour.
This function is enabled in "Picture mode - Cinema, Expert" when xvYCC signal is
inputted through HDMI, 1080p.
Colour Standard
(SD/HD)
■
■
Expert Pattern
(Off/Pattern1/Pattern2)
Converts the colour of a different video to HD colour. This function is set for SD
video (BT-601) and HD video (BT-709) colour format.
A
A
Colour Filter
(Off/Red/Green/Blue)
■
This is the pattern necessary for expert adjustment.
This function is enabled in "Picture Mode - Expert" when you watch DTV.
This is the function to filter the specific colours of the video.
You can use the RGB filter to set colour saturation and hue accurately.
This is the function to adjust the overall colour of the screen to the feeling you want.
a. Method : 2 Points
- Pattern: Inner, Outer
- Red/Green/Blue Contrast, Red/Green/Blue Brightness:
The adjustment range is -50 - +50.
b. Method : 20 Point IRE
- Pattern: Inner, Outer
- IRE (Institute of Radio Engineers) is the unit to display the size of the video signal
and can be set among 5, 10, 15 ~100. You can adjust Red, Green or Blue according
to each setting.
- Red/Green/Blue: The adjustment range is -50 - +50.
■
White Balance
(Medium/Warm/Cool)
Colour Management
System
PICTURE CONTROL
Edge Enhancer
(On/Off)
As the tool used by the experts to make adjustments by using the test patterns, this
does not affect other colours but can be used to selectively adjust the 6 colour
areas (Red/Green/Blue/Cyan/Magenta/Yellow).
Colour difference may not be distinctive even when you make the adjustments for
the general video.
■ Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
• Red/Green/Blue/Yellow/Cyan, Magenta Colour : The adjustment range
is -30 ~ +30.
• Red/Green/Blue/Yellow/Cyan/Magenta Tint : The adjustment range is
-30 ~ +30.
■ This feature is disable in RGB-PC and HDMI (PC) mode.
■
97
PICTURE CONTROL
PICTURE RESET
Settings of the selected picture modes return to the default factory settings.
PICTURE
Move
PICTURE
OK
Move
E
100
• Contrast
50
• Brightness
50
• Sharpness
70
• Sharpness
70
• Colour
70
0
?
R
G
• Advanced Control
Screen
PICTURE CONTROL
2
3
4
• Colour
70
Press Yes to start Picture Reset.
G
• Tint
0 R
• Advanced Control
Yes
No
• Reset
• Reset
1 MENU
100
• Brightness
• Tint
OK
E
• Contrast
Screen
Select T V S E T U P.
OK
Select P I C T U R E.
OK
Select R e s e t.
OK
Select Y e s.
5
OK
Initialize the adjusted value.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
98
IMAGE STICKING MINIMIZATION (ISM) METHOD
A frozen or still picture displayed on the screen for prolonged periods will result in a ghost image remaining
even when you change the image. Avoid allowing a fixed image to remain on the screen for prolonged periods.
White Wash
White wash removes permanent images from the screen.
Note: An excessive permanent image may be impossible to clear entirely with White Wash.
Orbiter
Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the
screen. To avoid a permanent image on the screen, the screen will move every 2 minutes.
Colour Wash
The colour block with the screen moved a little and the white pattern are alternately displayed. It is difficult to
sense the afterimage occurred while the temporary afterimage is removed and the colour pattern is operating.
Move
OK
OPTION
E
SIMPLINK
: On
Key Lock
: Off
Key Lock
: Off
Simple Manual
ISM Method
:Normal
ISM Method
Set ID
:1
Set ID
Demo Mode
: Off
Demo Mode
Mode Setting
: Home Use
Mode Setting
Factory Reset
2
3
4
OK
E
: On
Simple Manual
1 MENU
Move
SIMPLINK
Select T V S E T U P.
Factory Reset
:Normal
Normal
:1
Orbiter
: Off
Colour Wash
: Home Use
White Wash
PICTURE CONTROL
OPTION
• If you do not need this function, set N o r m a l .
OK
Select O P T I O N.
OK
Select I S M M e t h o d.
OK
Select N o r m a l , O r b i t e r , C o l o u r W a s h or W h i t e W a s h .
5
OK
Save.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
99
PICTURE CONTROL
DEMO MODE
Display the slide show to explain the various logo of this TV.
It is not possible to use D e m o M o d e in H o m e U s e mode.
In S t o r e D e m o, D e m o M o d e is automatically set to O n.
Once D e m o M o d e is set to O f f in S t o r e D e m o, D e m o M o d e does not run and only the screen is reset.
The screen is reset automatically after 5 minutes in D e m o M o d e.
OPTION
Move
OK
OPTION
Move
E
E
SIMPLINK
: On
SIMPLINK
: On
Key Lock
: Off
Key Lock
: Off
Simple Manual
Simple Manual
PICTURE CONTROL
ISM Method
:Normal
ISM Method
Set ID
:1
Set ID
Demo Mode
: Off
Demo Mode
:Normal
Off
:1
On(LED
On(LED On)
On)
: Off
Mode Setting
: Store Demo
Mode Setting
On(LED Off)
: Store Demo
Factory Reset
1 MENU
OK
Factory Reset
Select T V S E T U P.
• O n ( L E D O n ) : The LED at the bottom
of TV operates in Store Mode.
• O n ( L E D O f f ) : The LED at the bottom
2
3
4
of TV does not operate in Store Mode.
OK
Select O P T I O N.
OK
Select D e m o M o d e.
OK
5 MENU
100
Select O n to show the various feature of the TV.
Return to TV viewing.
After a while, D e m o M o d e starts.
If you want to stop the demo, press any but+ or - and MUTE button).
ton (Except
MODE SETTING
We recommend setting the TV to “Home Use” mode for the best picture in your home environment.
“Store Demo” mode is an optimal setting for displaying at stores.
OPTION
Move
OK
Mode Setting
E
SIMPLINK
: On
Key Lock
: Off
Selecting the environment.
Choose the setting mode you want.
Simple Manual
ISM Method
:Normal
Set ID
:1
Demo Mode
: Off
Home Use
Select [Home Use] to use this TV at home.
To use this TV in store, select [Store Demo].
PICTURE CONTROL
Mode Setting
Store Demo
: Store Demo
Factory Reset
1 MENU
2
3
4
5
Select T V S E T U P.
OK
Select O P T I O N.
OK
Select M o d e S e t t i n g.
OK
OK
Select S t o r e D e m o or H o m e
Use.
Save.
• Press the R E T U R N button to return to normal TV viewing.
101
SOUND & LANGUAGE CONTROL
AUTO VOLUME LEVELLER (AUTO VOLUME)
Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a
regular TV programme.
Because each broadcasting station has its own signal conditions, volume adjustment may be needed every
time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic
adjustments for each programme.
AUDIO
Move
Auto Volume
: Off
Clear Voice II
: On
• Level
Balance
SOUND & LANGUAGE CONTROL
2
3
4
: Off
Clear Voice II
: On
L
R
: Standard
On
Balance
Sound Mode
OK
Off
• Level
3
0
L
R
: Standard
• SRS TruSurround XT: Off
• SRS TruSurround XT: Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
E
1 MENU
Move
Auto Volume
3
0
Sound Mode
AUDIO
OK
E
Select T V S E T U P.
OK
Select A U D I O.
OK
Select A u t o V o l u m e.
OK
Select O n or O f f.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
102
CLEAR VOICE II
By differentiating the human sound range from others, it improves the sound quality of voices.
AUDIO
Move
AUDIO
OK
Move
Auto Volume
: Off
Auto Volume
: Off
Clear Voice II
: On
Clear Voice II
: On
• Level
3
Balance
0
Sound Mode
: Standard
0
Sound Mode
3
L
R
: Standard
• SRS TruSurround XT: Off
• SRS TruSurround XT: Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
E
Select T V S E T U P.
C l e a r V o i c e I I - O n”,
• If you select “C
OK
Select A U D I O.
OK
Select C l e a r V o i c e I I.
OK
Select O n or O f f.
S R S T r u S u r r o u n d X T feature will not
work.
• Select levels from ‘-6’ to ’6’.
4
Adjustment for Clear Voice II Level
With selecting On
SOUND & LANGUAGE CONTROL
2
On
3
Balance
R
E
1 MENU
Off
• Level
L
OK
Select L e v e l.
OK
Make appropriate adjustments.
6
Level
0
E
OK
E
5
Close
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
103
SOUND & LANGUAGE CONTROL
PRESET SOUND SETTINGS (SOUND MODE)
Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate
sound options based on the programme content.
S t a n d a r d, M u s i c, C i n e m a, S p o r t, and G a m e are preset for optimum sound quality at the factory and are
not adjustable.
AUDIO
Move
AUDIO
OK
Auto Volume
: Off
Auto Volume
: Off
Clear Voice II
: On
Clear Voice II
: On
• Level
Balance
3
0
Sound Mode
• Level
L
Balance
R
: Standard
Sound Mode
SOUND & LANGUAGE CONTROL
3
OK
XT: Off
• SRS TruSurroundMusic
• Treble
50Cinema
• Bass
50
• Bass
E
Select T V S E T U P.
■
Select A U D I O.
■
■
OK
Select S o u n d M o d e.
■
4
OK
L
Select S t a n d a r d, M u s i c,
C i n e m a, S p o r t, or G a m e.
■
■
■
R
Standard
50
E
2
: Standard
OK
3
0
• Treble
• SRS TruSurround XT: Off
1 MENU
Move
50Sport
Game
S t a n d a r d, M u s i c, C i n e m a, S p o r t,
and G a m e are preset for optimum
sound quality at the factory.
You can also adjust S o u n d M o d e in
the Q . M E N U.
S t a n d a r d : Offers standard-quality
sound.
M u s i c: Optimizes sound for listening to
music.
C i n e m a: Optimizes sound for watching
movies.
S p o r t: Optimizes sound for watching
sports events.
G a m e: Optimizes sound for playing
games.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
104
SOUND SETTING ADJUSTMENT - USER MODE
Adjust the sound to suit your taste and room situations.
Move
Auto Volume
: Off
Clear Voice II
: On
• Level
0
4
: On
Balance
R
: Standard
Sound Mode
3
R
0 L
: Standard• SRS TruSurround XT
• SRS TruSurround XT: Off
• Trebl XT: 50
Off
• SRS TruSurround
• Treble
50
• Treble • Bass50
• Bass
50
• Bass
E
Off
50
50
Close
5
Select T V S E T U P.
OK
Select A U D I O.
OK
Select S o u n d M o d e.
OK
Select S t a n d a r d, M u s i c,
C i n e m a, S p o r t, or G a m e.
OK
Select T r e b l e or B a s s.
OK
Make appropriate adjustments.
6
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
SRS TRUSURROUND XT
1 MENU
2
OK
3
■
■
Select T V S E T U P.
Select A U D I O.
■
OK
Select S R S T r u S u r r o u n d X T
OK
Select O n or O f f.
4
SOUND & LANGUAGE CONTROL
3
Clear Voice II
OK
E
2
: Off
• Level
L
E
1 MENU
Move
Auto Volume
3
Balance
Sound Mode
AUDIO
OK
E
AUDIO
C l e a r V o i c e I I - O n”, S R S
If you select “C
T r u S u r r o u n d X T feature will not work.
S R S T r u S u r r o u n d X T: TruSurround XT
Takes advantage of any multi-channel format
without needing to add extra speakers or
equipment. Dialog clarity, bass enrichment, and
the addition of stereo audio enhancement produces an immersive sound experience from
standard stereo material.
If sound quality or volume is not at the level
you want, it is recommended to use a separate
home theatre system or amplifier to cope with
different user environments.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
G
G
is a trademark of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs, Inc.
105
SOUND & LANGUAGE CONTROL
BALANCE
Adjust the left/right sound of speaker to suit your taste and room situations.
Move
Auto Volume
Clear Voice II
: On
Clear Voice II
3
0
Sound Mode
L
: Standard
SOUND & LANGUAGE CONTROL
4
R
OK
: Off
: On
• Level
3
Balance
Sound Mode
0 L
Balance
:
R0
L
R
: Standard
• SRS TruSurround XT: Off
• SRS TruSurround XT: Off Close
• Treble
50
• Treble
50
• Bass
50
• Bass
50
E
3
Move
E
Balance
2
AUDIO
: Off
• Level
1 MENU
OK
Auto Volume
E
AUDIO
E
Select T V S E T U P.
OK
Select A U D I O.
OK
Select B a l a n c e.
OK
Make appropriate
adjustments.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
106
TV SPEAKERS ON/OFF SETUP
You can adjust the TV internal speaker status.
In A V 1, A V 2, C O M P O N E N T, R G B and H D M I 1 with HDMI to DVI cable, the TV speaker can be operational
even when there is no video signal.
If you wish to use an external Hi-Fi system, turn off the TV internal speakers.
AUDIO
Move
OK
AUDIO
Move
E
E
Balance
Sound Mode
0
L
R
Balance
Sound Mode
: Standard
3
L
R
• SRS TruSurround XT: Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
• Reset
Digital Audio Out : PCM
Digital Audio Out : PCM
TV Speaker
TV Speaker
: On
: On
Off
On
SOUND & LANGUAGE CONTROL
2
0
: Standard
• SRS TruSurround XT: Off
• Reset
1 MENU
OK
Select T V S E T U P.
OK
Select A U D I O.
OK
Select T V S p e a k e r.
OK
Select O n or O f f.
4
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
! NOTE
G When
the TV speaker is turned off while the Simplink home theatre is operating, the sound output automatically
switches to the Home theatre speaker, but when the TV speaker is turned on, the sound output the TV speaker.
G Some menus in A U D I O are disabled when TV Speaker is set to Off.
107
SOUND & LANGUAGE CONTROL
SELECTING DIGITAL AUDIO OUT
This function allows you to select your preferred Digital Audio Output.
The TV can only output DOLBY Digital if a programme is broadcast with Dolby Digital audio.
When Dolby digital is available, selecting Dolby Digital in the Digital Audio Out menu will set SPDIF(Sony Philips
Digital Interface) output to Dolby Digital.
If Auto is selected in the digital audio out menu when only PCM is available, SPDIF output will be PCM(Pulsecode modulation).
AUDIO
Move
OK
AUDIO
Move
E
Balance
Sound Mode
0
L
R
: Standard
Balance
Sound Mode
0
L
SOUND & LANGUAGE CONTROL
• SRS TruSurround XT: Off
• SRS TruSurround XT: Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
• Reset
• Reset
Digital Audio Out : PCM
Digital Audio Out : PCM
TV Speaker
TV Speaker
: On
R
: Standard
: On
Auto
PCM
E
1 MENU
2
3
4
OK
Select T V S E T U P.
Select A U D I O.
OK
Select D i g i t a l A u d i o O u t.
OK
Select A u t o or P C M.
Manufactured under license from
Dolby Laboratories. “Dolby “and
the double-D symbol are trademarks of Dolby Laboratories.
• There is a possibility that when HDMI mode, some
DVD player do not make SPDIF sound, At that
time, set the output of the digital audio of the
DVD player to PCM.(In HDMI, Dolby Digital Plus
is not supported).
• During recording or playback audio only channel , Digital Audio Out is disabled.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
108
AUDIO RESET
Settings of the selected Sound Mode return to the default factory settings.
AUDIO
Move
AUDIO
OK
Move
E
E
Balance
Sound Mode
0
: Standard
Balance
L
Sound Mode
R
• SRS TruSurround XT: Off
• Bass
50
• Bass
?
Press Yes to start Audio Reset.
: On
TV Speaker
: On
E
No
Select T V S E T U P.
OK
Select A U D I O.
OK
Select R e s e t.
OK
Digital Audio Out : PCM
SOUND & LANGUAGE CONTROL
4
50
• Reset
Yes
3
R
• SRS TruSurround XT: Off
! Resetting sound mode configuration...
• Treble
50
E
2
L
50
Digital Audio Out : PCM
1 MENU
0
: Standard
• Treble
• Reset
TV Speaker
OK
Initialize the adjusted value.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
109
SOUND & LANGUAGE CONTROL
STEREO RECEPTION (IN ANALOGUE MODE ONLY)
When a programme is selected, the sound information for the station appears with the programme number
and station name.
Multi Audio
MONO
SOUND & LANGUAGE CONTROL
1Q. MENU
Select M u l t i A u d i o.
2
Select M o n o or S t e r e o.
• Press the Q . M E N U button to return to normal TV viewing.
SPEAKER SOUND OUTPUT SELECTION
In AV, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers.
Select the sound output.
L + R : Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio R input is
sent to the right loudspeaker.
L + L : Audio signal from audio L input is sent to left and right loudspeakers.
R + R : Audio signal from audio R input is sent to left and right loudspeakers.
110
LANGUAGE SELECTION (IN DIGITAL MODE ONLY)
The Audio function allows selection of a preferred language.
If audio data in a selected language is not broadcast, the default language audio will be played.
Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed.
When the languages you selected as the primary for Audio Language and Subtitle Language are not supported,
you can select desired language in OPTION Menu.
1 MENU
2
2
Select O P T I O N.
OK
3
Select A u d i o L a n g u a g e or
S u b t i t l e L a n g u a g e.
OK
4
OK
Select O P T I O N.
OK
Select Hard of Hearing(
OK
Select O n or O f f.
).
4
OK
5
Select T V S E T U P.
OK
Select your desired language.
Save.
• Press the R E T U R N button to move to the previous menu screen.
< Audio Language Selection >
G When two or more audio languages are broadcast, you can
select the audio language.
1Q. MENU
2
Audio Language OSD Information
Display
N.A
Select M u l t i A u d i o.
Select an audio language.
Status
Not Available
MPEG Audio
Dolby Digital Audio
Audio for “Visual Impaired”
Audio for “Hearing Impaired”
SOUND & LANGUAGE CONTROL
3
1 MENU
Select T V S E T U P.
3
Select L+R, L+L or R+R.
During recording or playback audio only channel , Audio
Language Selection is disabled.
< Subtitle Language Selection >
G When two or more subtitle languages are broadcast, you
can select the subtitle language with the SUBTITLE button
on the remote control.
button to select a subtitle language.
G Press the
G
Subtitle Language OSD Information
Display
N.A
Status
Not Available
Teletext Subtitle
Subtitle for “Hard of Hearing”
- The audio/subtitles can be displayed in a simpler form with 1 to 3 characters broadcast by the service provider.
- When you select supplementary Audio (Audio for “Visual/Hearing Impaired”) the TV may output a part of the Main audio.
111
TIME SETTING
CLOCK SETUP
The clock is set automatically when receiving a digital signal. (You can set the clock manually only if the TV has no
DTV signal.)
You must set the time correctly before using on/off timer function or schedule recording.
TIME
Move
OK
TIME
Move
Clock
Clock
Date
Off Time
: Off
Off Time
: Off
On Time
: Off
On Time
: Off
Sleep Timer : Off
OK
Sleep Timer : Off
01
Month
Mar.
Year
2009
Hour
16
Minute
09
Time Zone
NSW/ACT
GMT+11.0
Close
TIME SETTING
1 MENU
2
3
OK
Select T I M E.
OK
Select C l o c k.
OK
Select either the year, date, or time option.
3
4
Select T V S E T U P.
Set the year, date, and time options.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
112
AUTO ON/OFF TIME SETTING
The Off time function automatically switches the TV to standby at a preset time.
Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode
unless a button has been pressed.
The Off time function overrides the On timer function if both are set to the same time.
The TV must be in standby mode for the On timer to work.
TIME
Move
TIME
OK
Move
Clock
Clock
13 Mar. 2009 02:24
Off Time
: Off
Off Time
: Off
On Time
: Off
On Time
: Off
Sleep Timer : Off
Sleep Timer : Off
OK
Repeat
Off
F
Hour
00
Minute
00
Input
G
Antenna
Programme
DTV 1
Volume
30
Close
1 MENU
2
OK
Select T I M E.
OK
Select O f f t i m e or O n t i m e.
OK
Select R e p e a t.
4
5
Select O f f, O n c e, D a i l y, M o n .~FF r i .,
M o n .~S
S a t ., S a t .~S
S u n ., or S u n d a y.
■
■
To cancel O n / O f f T i m e function, select O f f.
Only for On Time function
1
OK
Select I n p u t.
2
Select the desired input source.
3
When Selecting A n t e n n a:
set the programme at turn-on.
TIME SETTING
3
Select T V S E T U P.
4
Adjust to sound level at
turn-on.
6
Select and set H o u r or M i n u t e.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
SLEEP TIMER SETTING
You do not have to remember to switch the TV off before you go to sleep.
The sleep timer automatically switches the TV to standby after the preset time has elapsed.
1Q. MENU
2
Select S l e e p T i m e r.
Select O f f, 1 0, 2 0, 3 0, 6 0, 9 0, 1 2 0, 1 8 0 or 2 4 0 m i n..
• When you switch the TV off, the preset sleep timer is cancelled.
• You can also adjust S l e e p T i m e r in the T I M E menu.
113
PARENTAL CONTROL / RATINGS
SET PASSWORD & LOCK SYSTEM
Setting up Your Password
Set up blocking schemes to block specific programme, ratings, and external viewing sources.
A password is required to gain access to this menu.
LOCK
Move
Lock System
LOCK
OK
: Off
Lock System
Set Password
OK
Set Password
Enter Password
Block Programme
Block Programme
Parental Guidance
Move
: Off
* * : Blocking
* * Off
Parental Guidance
: Blocking Off
Input Block
Input Block
Close
PARENTAL CONTROL / RATINGS
114
1 MENU
■
2
3
Select T V S E T U P.
OK
OK
1
2
3
4
5
6
7
8
9
0
Select L O C K.
Input the password.
■
Enter the password as requested.
The TV is set up with the initial password “0-0-0-0”.
Lock System
Revitalize B l o c k P r o g r a m m e, P a r e n t a l G u i d a n c e and I n p u t B l o c k function.
LOCK
Move
Lock System
OK
: Off
Parental Guidance
Move
: Off
OK
Off
On
Block Programme
Block Programme
: Blocking Off
Parental Guidance
: Blocking Off
Input Block
Input Block
Select T V S E T U P.
• If selecting O n, B l o c k P r o g r a m m e,
OK
OK
1
2
3
4
5
6
7
8
9
Select L O C K.
Input the password.
0
4
Select L o c k S y s t e m.
5
OK
Select O n or O f f.
PARENTAL CONTROL / RATINGS
P a r e n t a l G u i d a n c e and I n p u t
B l o c k operates.
2
3
Lock System
Set Password
Set Password
1 MENU
LOCK
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
115
PARENTAL CONTROL / RATINGS
Set Password
Change the password by inputting a new password twice.
LOCK
Move
OK
LOCK
OK
*
*
*
*
*
*
*
*
Set Password
Set Password
Block Programme
Block Programme
Confirm
Parental Guidance
:
: Off
Parental Guidance
: Blocking Off
Lock System
Move
: Off
New
Lock System
Off
Input Block
Blocking
Close
Input Block
1 MENU
PARENTAL CONTROL / RATINGS
2
3
Select T V S E T U P.
OK
OK
1
2
3
4
5
6
7
8
9
Select L O C K.
Input the password.
0
4
Select S e t p a s s w o r d.
5
OK
1
2
3
4
5
6
7
8
9
0
Choose any 4 digits for your new password.
As soon as the 4 digits are entered, re-enter the same
4 digits on the C o n f i r m.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
116
BLOCK PROGRAMME
Blocks any programme that you do not want to watch or that you do not want your children to watch.
O n”.
It is available to use this function in L o c k S y s t e m ”O
Enter the password to watch a blocked programme.
1
LOCK
Move
Lock System
ABC TV
OK
: Off
DTV
RADIO
TV
1 ABC TV
2 ABC TV Sydney
4 ABC 2
5 ABC 3
6 ABC HDTV
8 Nine Digtal
Set Password
Block Programme
Parental Guidance
: Blocking Off
Input Block
Pr. Change
Navigation
P
Page Change
Previous
Block/Unblock
1 MENU
3
OK
OK
1
2
3
4
5
6
7
8
9
Select L O C K.
Input the password.
0
4
Select B l o c k P r o g r a m m e.
5
OK
Select a programme to block or unblock.
PARENTAL CONTROL / RATINGS
2
Select T V S E T U P.
6
GREEN
Block or unblock a programme.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
117
PARENTAL CONTROL / RATINGS
Parental Guidance
This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate.
A password is required to gain access to this menu.
This set is programmed to remember which option it was last set to even if you switch the set off.
Prevents children from watching certain adult’s TV programmes, according to the ratings limit set.
LOCK
Move
Lock System
OK
: On
LOCK
Lock System
Set Password
Set Password
Block Programme
Block Programme
Move
OK
Off: Permits all programmes
: Blocking
On
Block All
Parental Guidance : Blocking Off
G
Parental Guidance : Blocking
PGOff
Input Block
Input Block
M
MA
AV
R
Block Off
1 MENU
PARENTAL CONTROL / RATINGS
2
3
OK
OK
Select T V S E T U P.
OK
Select L O C K.
Select P a r e n t a l G u i d a n c e.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
118
INPUT BLOCK
Enables you to block an input.
LOCK
Move
Lock System
OK
: On
Lock System
Set Password
Set Password
Block Programme
Block Programme
Parental Guidance
LOCK
: Blocking Off
Input Block
Parental Guidance
Input Block
Move
OK
: OnAV1
F
AV2
Off
G
Off
Component1
: Blocking Off
Component2
Off
Off
RGB
Off
HDMI1
Off
HDMI2
Off
HDMI3
Off
HDMI4
Off
Close
1 MENU
3
OK
OK
1
2
3
4
5
6
8
9
7
PARENTAL CONTROL / RATINGS
2
Select T V S E T U P.
Select L O C K.
Input the password.
0
4
Select I n p u t B l o c k.
5
OK
Select input source.
6
Select O n or O f f.
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
119
PARENTAL CONTROL / RATINGS
KEY LOCK
The TV can be set so that the remote control is required to control it. This feature can be used to prevent unauthorized viewing.
OPTION
Move
Audio Language
Subtitle Language
Hard of Hearing(
Subtitle Language
PARENTAL CONTROL / RATINGS
5
OK
: English
: English
) : Off
Input Label
: Off
SIMPLINK
Key Lock
: Off
Key Lock
: Off
Off
: Off
On
On
Simple Manual
:Normal
E
4
Hard of Hearing(
SIMPLINK
ISM Method
3
Move
: English
) : Off
Simple Manual
2
OPTION
Audio Language
Input Label
1 MENU
OK
: English
ISM Method
:Normal
E
O n’, if the TV is turned off, press the r / I,
• In K e y L o c k ‘O
Select T V S E T U P.
OK
Select S E T U P.
OK
Select K e y L o c k.
OK
Select O n or O f f.
INPUT, P D or E button on the TV or POWER, INPUT, P
or NUMBER buttons on the remote control then the
set will be turned on.
• With the K e y L o c k O n, the display ‘ ! K e y L o c k’
appears on the screen if any button(Except
(power)
button) on the front panel is pressed while viewing the TV.
OK
• Press the M E N U button to return to normal TV viewing.
• Press the R E T U R N button to move to the previous menu screen.
120
TELETEXT
❁❂✰
Q. MENU
MENU
GUIDE
This feature is not available in all countries.
The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT
systems. SIMPLE (standard teletext) consists of a number of pages which
are selected by directly entering the corresponding page number. TOP and
FASTEXT are more modern methods allowing quick and easy selection of
teletext information.
OK
RETURN
EXIT
RECORD
MARK
CHAR/NUM
LIVE
P
P
A
G
E
MUTE
DELETE
LIST
Q.VIEW
REPEAT
RATIO
SIMPLE TEXT
STOP
FAV
SWITCH ON/OFF
Press the T E X T button to switch to teletext. The initial page or last page
viewed appears on the screen.
Two page numbers, TV station name, date and time are displayed on the
screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the T E X T button to switch off teletext. The previous mode reappears.
CO
TIME NTROL
Teletext is a free service broadcast by most TV stations which gives up-tothe-minute information on news, weather, television programmes, share
prices and many other topics.
CO
TIME NTROL
Time Machine
AV MODE
ENERGY SAVING
Page selection
1
Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you
press a wrong number, you must complete the three digit number and then re-enter the correct page number.
The P
button can be used to select the preceding or following page.
2
TELETEXT
A
TOP TEXT
The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field
denotes the next group and the blue field indicates the next block.
A
Block / group / page selection
1
4
With the blue button you can progress from block to block.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
With the green button you can proceed to the next existing page with automatic overflow to the next group.
Alternatively the P button can be used.
The red button returns to the previous selection. Alternatively the P button can be used.
A
Direct page selection
2
3
As with SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER
buttons in TOP mode.
121
TELETEXT
FASTEXT
The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button.
A Page selection
1
2
3
4
Press the T . O P T button and then use
button to select i menu. Display the index page.
You can select the pages which are colour coded along the bottom line with corresponding coloured buttons.
AS with SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode.
The P
button can be used to select the preceding or following page.
SPECIAL TELETEXT FUNCTIONS
■
Press the T . O P T button and then use
button to select the Text Option menu.
i
Text Option
A INDEX
Select the each index page.
Index
Time
TELETEXT
A TIME
When viewing a TV programme, Select this menu to display the time at the top right hand
corner of the screen.
In the teletext mode, press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the
RED/GREEN or NUMBER buttons.
Hold
Reveal
Update
Close
A HOLD
Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this menu is
selected the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change
is inactive.
?
A REVEAL
Select this menu to display concealed information, such as solutions to riddles or puzzles.
A UPDATE
Displays the TV picture on the screen while waiting for a new teletext page. The display will appear at the top left
hand corner of the screen. When the updated page is available then display will change to the page number. Select
this menu again to view the updated teletext page.
122
APPENDIX
TROUBLESHOOTING
The TV does not operate properly.
Check to see if there is any object between the TV and the remote control causing
an obstruction. Ensure you are pointing the remote control directly at the TV.
A Ensure that the batteries are installed with correct polarity (+ to +, - to -).
A Ensure that the correct remote operating mode is set : TV, STB etc.
A Install new batteries.
A
The remote control
does not work
Power is suddenly
turned off
A
A
Check the power control settings. Has the Power supply been interrupted.
The TV goes into Standby mode automatically if no signal is received and no operation is performed for 15 minutes.
The video function does not work.
Check whether the TV is switched on.
A Try another channel. The problem may be with the broadcast.
A Is the power cord inserted correctly into the mains?
A Check your antenna direction and/or location.
A Test the mains outlet by plugging another product into the same outlet.
A
No picture &No sound
Picture appears slowly
after switching on
A
This is normal, the image is muted during the TV startup process. Please contact
your service centre, if the picture has not appeared after five minutes.
No or poor colour
or poor picture
Horizontal/vertical bars
or picture shaking
Poor reception on
some channels
Lines or streaks
in pictures
No picture
when connecting HDMI
A
APPENDIX
Adjust Colour in menu option.
A Allow a sufficient distance between the product and the VCR.
A Try another channel. The problem may be with the broadcast.
A Are the video cables installed properly?
A Activate any function to restore the brightness of the picture.
A
Check for local interference such as an electrical appliance or power tool.
Station or cable channel experiencing problems, tune to another station.
Station signal is weak, reposition the antenna to receive weaker stations.
A Check for sources of possible interference.
A
A
A
Check antenna (Change the position of the antenna).
A
Check that your HDMI cable is version 1.3 or higher.
If the HDMI cables don’t support HDMI version 1.3, flickering or no screen display can result. Please use the latest cables that support at least HDMI version
1.3.
123
APPENDIX
The audio function does not work.
A
Picture OK & No sound
A
A
A
No output from one
of the speakers
+ or - button.
Press the
Sound muted? Press MUTE button.
Try another channel. The problem may be with the broadcast.
Are the audio cables installed properly?
A
Adjust B a l a n c e in menu option.
Unusual sound from
inside
the product
A
A change in ambient humidity or temperature may result in an unusual noise
when the product is switched on or off and does not indicate a fault with the
product.
No sound
when connecting HDMI
or USB
A
Check HDMI cable over version 1.3.
Check USB cable over version 2.0.
A
*This feature is not available for all models.
There is a problem in PC mode. (Only PC mode applied)
APPENDIX
The signal is out of range
(Invalid format)
Vertical bar or stripe on
background &
Horizontal Noise &
Incorrect position
Screen colour is unstable
or single colour
A
Adjust resolution, horizontal frequency, or vertical frequency.
A
Check the input source.
A
Use Auto configure or adjust size, phase, or H/V position. (Option)
A
Check the signal cable.
Reinstall the PC video card.
A
There is a problem in PICTURE settings.
When the user changes
the picture settings, the
TV automatically converts
back to the initial settings
after a certain period of
time.
124
A
It means that the TV is currently set to S t o r e D e m o mode.
To switch to H o m e U s e mode you should do the followings:
From the TV Menu, choose O P T I O N -> Choose M o d e S e t t i n g -> Choose
H o m e U s e.
Now, you have completed switching to the H o m e U s e mode.
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV.
Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1
A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water
and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it
to wipe the screen.
2
Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching on.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
A Do not to use a wet cloth.
A
Extended Absence
CAUTION
If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power
cord to protect against possible damage from lightning or power surges.
APPENDIX
G
125
APPENDIX
PRODUCT SPECIFICATIONS
MODELS
Dimensions
with stand
(Width x Height x Depth)
without stand
Weight
with stand
without stand
Power requirement
Television System
50PS80ED-AA
60PS80ED-AA
48.4 x 32.9x 12.2inches
1228.8 x 835.8 x 309 mm
57.7 x 38.9 x 14.6 inches
1465.4x 986.4 x 371 mm
48.4 x 31.3 x 3.1 inches
1228.8x 795.1 x 78.9 mm
57.7 x 36.5 x 3.2 inches
1465.4 x 926.7 x 82.1 mm
38.3 kg / 84.4 lbs
34.3kg / 75.6 lbs
53.06kg / 116.4 lbs
47.16kg / 101.4 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
VHF 0-12, UHF 20-75, CATV 02-44, DTV 06-12, 27-69
External Antenna Impedance
APPENDIX
126
60PS8***
PAL B/B, DVB-T
Programme Coverage
Operating Temperature
Environment condition Operating Humidity
Storage Temperature
Storage Humidity
■
50PS8***
75 ohm
32 ~ 104°F (0 ~ 40°C)
Less than 80%
-4 ~ 140°F (-20 ~ 60°C)
Less than 85%
The specifications shown above may be changed without prior notice for quality improvement.
This function is not available for all models.
PROGRAMMING THE REMOTE CONTROL
The remote control is a multi brand or universal remote. It can be programmed. to operate most remote
controlled devices from other manufacturers.
Note that the remote control may not control all models from other brands.
Programming a code into a remote mode
1
Testing your remote control.
To find out whether your remote control can operate other components without programming, turn on a
component such as a STB and press the corresponding mode button (such as a S T B) on the remote control, while pointing at the component. Test the POWER and P
buttons to see if the component
responds correctly. If the component does not operate correctly, the remote control requires programming
to operate the device.
2
Switch on the component to be programmed, then press the corresponding mode button (such as S T B)
on the remote control. The remote control button of the desired device is illuminated.
3
Press the M E N U and M U TE buttons simultaneously, the remote control is ready to be programmed with
the code.
4
Enter a code number using the number buttons on the remote control. Programming code numbers for the
corresponding component can be found on the following pages. If the code is correct, the device will turn off.
5
Press the M E N U button to store the code.
6
Test the remote control functions to see if the component responds correctly. If not, repeat from step 2.
Brand
ALPHASTAR DSR
AMPLICA
BIRDVIEW
CHANNEL MASTER
Codes
123
050
051
013
036
CHAPARRAL
008
CITOH
054
CURTIS MATHES
050
DRAKE
005
011
141
DX ANTENNA
024
ECHOSTAR
038
093
097
122
ELECTRO HOME
089
EUROPLUS
114
FUJITSU
017
133
GENERAL INSTRUMENT 003
031
HITACHI
139
Brand
126 129
014 015 018
055
009 012 077
145
006 007 010
052 112 116
046
040
094
098
056
057
095
099
076
058
096
100
021 022 027
134
004 016 029
059 101
140
Codes
HOUSTON TRACKER 033
057
HUGHES
068
JANIEL
060
JERROLD
061
KATHREIN
108
LEGEND
057
LG
001
LUTRON
132
LUXOR
062
MACOM
010
065
MEMOREX
057
NEXTWAVE
028
NORSAT
069
PACE SKY SATELLITE 143
PANASONIC
060
PANSAT
121
PERSONAL CABLE
117
PHILIPS
071
PICO
105
PRESIDENT
019
PRIMESTAR
030
037 039 051
104
147
144
059 063 064
124 125
070
142
102
110 111
Brand
PROSAT
RCA
REALISTIC
SAMSUNG
SATELLITE SERVICE CO
APPENDIX
HDSTB
Codes
072
066
043
123
028
085
SCIENTIFIC ATLANTA 032
SONY
103
STARCAST
041
SUPER GUIDE
020
TEECOM
023
088
137
TOSHIBA
002
UNIDEN
016
044
078
10
VIEWSTAR
115
WINEGARD
128
ZENITH
081
091
106
074
035 047 057
138
124 125
026 075 087
090 107 130
127
025
045
079
135
042 043
048 049
080 086
136
146
082 083 084
120
127
APPENDIX
IR CODES
1. How to Connect
A
Connect your wired remote control to the Remote Control port on the TV.
2. Remote Control IR Codes
A
Output waveform
Single pulse, modulated with 37.917KHz signal at 455KHz
Carrier frequency
Tc
FCAR = 1/TC = fOSC/12
Duty ratio = T1/TC = 1/3
T1
A
Configuration of frame
1st frame
Lead code
Low custom code
High custom code
Data code
Data code
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
Repeat frame
Repeat code
APPENDIX
A
Tf
Lead code
9 ms
4.5 ms
A
Repeat code
0.55 ms
9 ms
A
2.25 ms
Bit description
Bit ”0”
Bit ”1”
0.56 ms
0.56 ms
2.24 ms
1.12 ms
A
Frame interval: Tf
The waveform is transmitted as long as a key is depressed.
Tf
Tf
Tf=108ms @455KHz
128
Code (Hexa)
Energy Saving
POWER
INPUT
RATIO
TV/RAD
Q.MENU
MENU
GUIDE
Up ( )
Down ( )
Left ( )
Right ( )
OK( )
RETURN/EXIT
INFO i
AV MODE
FAV ( MARK )
MUTE
P
P
Number Key 0~9
LIST
Q.VIEW
RED Key
GREEN Key
YELLOW Key
BLUE Key
TEXT
T.OPT(T.Option)
SUBTITLE
SIMPLINK
Stop/Live
Record
G
II
Note
R/C BUTTON
R/C BUTTON(POWER ON/OFF)
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
APPENDIX
95
08
0B
79
F0
45
43
AB
40
41
07
06
44
28
AA
30
02
03
1E
09
00
01
10~19
53
1A
72
71
63
61
20
21
39
7E
B1
BD
8F
8E
B0
BA
Function
129
APPENDIX
EXTERNAL CONTROL THROUGH RS-232C
RS-232C Setup
Connect the RS-232C (serial port) input jack to an
external control device (such as a computer or an A/V
control system) to control the product’s functions
externally.
Connect the serial port of the control device to the
RS-232C jack on the product back panel.
Note: RS-232C connection cables are not supplied
with the product.
AV
V IN 1
AV
V OUT
VIDEO
VIDEO
L
L/MONO
L/
MONO
AUDIO
R
AUDIO
R
Type of Connector; D-Sub 9-Pin Male
APPENDIX
No.
Pin Name
1
2
3
4
5
6
7
8
9
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
1
5
6
9
No Connection
RS-232C Configurations
7-Wire Configurations (Standard RS-232C cable)
RXD
TXD
GND
DTR
DSR
RTS
CTS
130
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
8
7
D-Sub 9
D-Sub 9
TXD
RXD
GND
DSR
DTR
CTS
RTS
3-Wire Configurations(Not standard)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
7
8
D-Sub 9
D-Sub 9
TXD
RXD
GND
DTR
DSR
RTS
CTS
Set ID
Use this function to specify a set ID number.
Refer to ‘Real Data Mapping’. G p.135
OPTION
Move
OPTION
OK
E
SIMPLINK
: On
Key Lock
: Off
Key Lock
: Off
Simple Manual
ISM Method
:Normal
ISM Method
:Normal
Set ID
:1
Set ID
:1
Demo Mode
: Off
Demo Mode
: Off
Mode Setting
: Home Use
Mode Setting
: Home Use
Factory Reset
3
4
Factory Reset
F
1
G
Close
Select T V S E T U P.
APPENDIX
2
OK
E
: On
Simple Manual
1 MENU
Move
SIMPLINK
OK
Select OPTION.
OK
Select Set ID.
OK
Choose the desired TV ID number.
The adjustment range of Set ID is 1~99.
• Press B A C K to move to the previous menu screen.
131
APPENDIX
Communication Parameters
Baud rate : 9600 bps (UART)
A Data length : 8 bits
A Parity : None
Stop bit : 1 bit
A Communication code : ASCII code
A Use a crossed (reverse) cable.
A
A
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
Command Reference List
COMMAND COMMAND
DATA
1
2
(Hexadecimal)
APPENDIX
01. Power Control
02. Aspect Ratio
03. Screen Mute
04. Volume Mute
05. Volume Control
06. Contrast
07. Brightness
08. Colour
09. Tint
10. Sharpness
11. OSD Select
12. Remote control lock mode
13. Treble
14. Bass
15. Balance
16. Colour Temperature
17. ISM Method
18. Lower Power
19. Auto Configure
20. Tune Command
21. Programme Memory/
Skip
22. Key
23. Input select
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
j
j
j
m
m
a
c
d
e
f
g
h
i
j
k
l
m
r
s
t
u
p
q
u
a
b
m
x
c
b
00 ~ 01
Refer to p.133
00 ~ 01
00 ~ 01
00 ~ 64
00 ~ 64
00 ~ 64
00 ~ 64
00 ~ 64
00 ~ 64
00 ~ 01
00 ~ 01
00 ~ 64
00 ~ 64
00 ~ 64
00 ~ 02
Refer to p.135
00 ~ 12
01
Refer to p.136
00 ~ 01
Key Code
Refer to p.136
* When setting the 17 ~ 23, a menu does not appear on
screen.
* Note: During USB operations such as Dvix or EMF, all
commands except Power (ka) and Key (mc) are not executed and treated as NG.
132
* [Command 1] : First command to control the TV.
(j, k, m or x)
[Command
2]
:
Second
command to control the TV.
*
: You can adjust the set ID to choose
* [Set ID]
desired monitor ID number in option
menu. Adjustment range is 1 ~ 99.
When selecting Set ID ‘0’, every connected set is controlled.
Set ID is indicated as decimal (1~99) on
menu and as Hexa decimal (0x0~0x63)
on transmission/receiving protocol.
: To transmit command data.
* [DATA]
Transmit ‘FF’ data to read status of command.
[Cr]
:
Carriage
Return
*
ASCII code ‘0x0D’
: ASCII code ‘space (0x20)’
* [ ]
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The set transmits ACK (acknowledgement) based on
this format when receiving normal data. At this time, if
the data is data read mode, it indicates present status
data. If the data is data write mode, it returns the
data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* The set transmits ACK (acknowledgement) based on
this format when receiving abnormal data from
non-viable functions or communication errors.
Data 00: Illegal Code
0 1 . Power Control(Command: k a)
04. Volume Mute (Command: ke)
To control Power On/Off of the TV.
To control volume mute on/off.
You can also adjust mute using the MUTE button on remote
control.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 00: Power Off
Data 01: Power On
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Ack
Data 00: Volume Mute On (Volume Off)
[a][ ][Set ID][ ][OK][Data][x]
Data 01: Volume Mute Off (Volume On)
Ack
[e][ ][Set ID][ ][OK][Data][x]
0 2 . Aspect Ratio (Command: k c)
To adjust the screen format.
Transmission
0 5 . Volume Control (Command: k f)
To adjust volume.
You can also adjust volume with the VOLUME buttons on
Remote Control.
[k][c][ ][Set ID][ ][Data][Cr]
Transmission
Data 01: 4 : 3
02: 16 : 9
04: Zoom
06: Original
[k][f][ ][Set ID][ ][Data][Cr]
07: 14 : 9
09: Just Scan
10: Cinema Zoom1
1F: Cinema Zoom16
Ack
[c][ ][Set ID][ ][OK][Data][x]
Data Min: 00H ~ Max: 64H
(*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’. G p.135.
Ack
[f][ ][Set ID][ ][OK][Data][x]
0 6 . Contrast (Command: k g)
To adjust screen contrast.
To select screen mute on/off.
You can also adjust contrast in the PICTURE Menu.
Transmission
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
[k][g][ ][Set ID][ ][Data][Cr]
Ack
Data Min: 00H ~ Max: 64H
(*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’. G p.135.
[d][ ][Set ID][ ][OK][Data][x]
Data 00: Screen Mute off (Picture On)
Data 01: Screen Mute on (Picture Off)
* In case of screen mute on, TV will not display On
Screen Display (OSD).
Ack
APPENDIX
03. Screen Mute (Command: k d)
[g][ ][Set ID][ ][OK][Data][x]
07. Brightness (Command: k h)
To adjust screen brightness.
You can also adjust brightness in the PICTURE Menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data Min: 00H ~ Max: 64H
(*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’. G p.135.
Ack
[h][ ][Set ID][ ][OK][Data][x]
133
APPENDIX
08. Colour (Command: k i)
12. Remote Control Lock Mode (Command: k m)
To adjust screen colour.
To lock the remote control and the front panel controls on the set.
You can also adjust colour in the PICTURE Menu.
Transmission
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
[k][i][ ][Set ID][ ][Data][Cr]
Data 00: off
Data Min: 00H ~ Max: 64H
(*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’. G p.135.
Ack
Ack
[i][ ][Set ID][ ][OK][Data][x]
If you’re not using the remote control and front panel controls on the TV, use this mode. When main power is on/off,
remote control lock is released.
Data 01: on
[m][ ][Set ID][ ][OK/NG][Data][x]
09. Tint (Command: k j)
13. Treble (Command: k r)
To adjust screen tint.
You can also adjust tint in the PICTURE Menu.
To adjust treble.
Transmission
You can also adjust treble in the AUDIO menu.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
[k][j][ ][Set ID][ ][Data][Cr]
Data Red: 00H ~ Green: 64H
(*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’. G p.135.
Ack
[ j ][ ][Set ID][ ][OK][Data][x]
10. Sharpness (Command: k k)
Ack
[r][ ][Set ID][ ][OK][Data][x]
APPENDIX
To adjust screen sharpness.
14. Bass (Command: k s)
You can also adjust sharpness in the PICTURE Menu.
To adjust bass.
Transmission
You can also adjust bass in the AUDIO menu.
[k][k][ ][Set ID][ ][Data][Cr]
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Data Min: 00H ~ Max: 64H
(*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’. G p.135.
Ack
[k][ ][Set ID][ ][OK/NG][Data][x]
11. OSD Select (Command: k l)
To select OSD (On Screen Display) on/off.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD Off
Data 01: OSD On
Ack
[l][ ][Set ID][ ][OK][Data][x]
134
Data Min: 00H ~ Max: 64H
(*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’. G p.135.
Data Min: 00H ~ Max: 64H
(*transmit by Hexadecimal code)
*Refer to ‘Real data mapping’. G p.135.
Ack
[s][ ][Set ID][ ][OK][Data][x]
15. Balance (Command: k t)
18. Low Power(Energy Saving) (Command: j q)
To adjust balance.
To control the low power function.
You can also adjust balance in the AUDIO menu.
[j][ q ][Set ID][ ][Data][Cr]
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
0
0
0
0
0
5th bit : 0 : Low Power
1 : Intelligent Power
6~8th bit : Reserved bit
Data Min: 00H ~ Max: 64H
(*transmit by Hexadecimal code)
Ack
[t][ ][Set ID][ ][OK][Data][x]
0
0
Level : 0~15
7
6 5
4
3
2
1
0
Data
Function
X
x
X
0
0
0
0
0
00H
Off
16. Colour Temperature (Command: k u)
X
X
x
0
0
0
0
1
01H
Minimum
To adjust colour temperature.
X
X
x
0
0
0
1
0
02H
Medium
You can also adjust colour temperature in the PICTURE menu.
0
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
x
x
X
0
0
0
1
1
03H
Maximum
x
x
x
1
0
0
0
0
10H
Intelligent(Low)
Data 00: Medium 01: Cool 02: Warm
x
x
x
1
0
0
0
1
11H
Intelligent(Mid)
Ack
x
x
x
1
0
0
1
0
12H
Intelligent(High)
[u][ ][Set ID][ ][OK][Data][x]
Ack
[q][ ][Set ID][ ][OK][Data][x]
17. ISM Method (Command: j p)
Data : Low Power : 0H, 1H, 2H, 3H
To avoid having a fixed image remain on screen.
Intelligent : 10H~12H(*transmit by Hexadecimal code)
[j][ p ][Set ID][ ][Data][Cr]
0
0
0
0
0
2 th Byte
0
0
1 th Byte
* Real data mapping 1
7
6 5
4
3
2
1
0
Data
0
0
0
0
0
1
0
2H
Orbiter
A : Step 10 (Set ID 10)
White Wash
F : Step 15 (Set ID 15)
10 : Step 16 (Set ID 16)
0
Function
0
0
0
0
0
1
0
0
4H
0
0
0
0
1
0
0
0
8H
Normal
0
0 1
0
0
0
0
0
20H
Colour Wash
X
X
X
X
Reserved
00 :
Step 0
64 : Step 100
6E : Step 110
Ack
73 : Step 115
74 : Step 116
[p][ ][Set ID][ ][OK][Data][x]
C7: Step 199
Data : 2H, 4H, 8H, 20H
FE : Step 254
FF : Step 255
* Real data mapping 2
00 :-40
01 :-39
02 :-38
APPENDIX
0
28 :0
4E : +38
4F : +39
50 : +40
* More two kinds of function can not be set at a time.
135
APPENDIX
19. Auto Configuration (Command: j u)
To adjust picture position and minimize image shaking automatically. Auto configuration only works in RGB-PC mode.
Transmission
[ j ][u][ ][Set ID][ ][Data][Cr]
2 3 . I n p u t s e l e c t (C o m m a n d : x b )
To select input source for TV.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data 1
Ack
Data Structure
[u][ ][Set ID][ ][OK/NG][Data][x]
Data 1H
MSB
0
20. Tune Command (Command: m a)
LSB
0
0
0
0
0
0
External Input
Input Number
External Input
Data
Tune channel to following physical number.
Transmission
[m ][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr]
0
0
0
0
DTV
Data 00 : High channel data
0
0
0
1
Analogue
Data 01 : Low channel data ex. No. 47 -> 00 2F(2FH)
0
0
1
0
AV
No. 394 -> 018A (18AH) No. 0 -> Don’t care
0
1
0
0
Component
0
1
1
0
RGB
1
0
0
1
HDMI
Data 02 : 0x00 : ATV, 0x10 : DTV, 0x20 : Radio
Channel data range
Analogue - Min : 00 ~ Max : 63(0 ~ 99)
Digital - Min : 00 ~ Max : 3E7(0 ~ 999)
Input Number
Ack
[a][ ][Set ID][ ][OK][][Data0][x]
Data Min : 00H ~ Max :ff
21. Programme Memory/Skip(Command: m b)
APPENDIX
To set skip status for the current Programme.
Transmission
[m ][b][ ][Set ID][ ][Data][Cr]
Data 00 : Skip
01 : Memory
Ack
[b][ ][Set ID][ ][OK/NG][Data][x]
22. K e y (Command: m c)
IR remote key code.
Transmission
[m ][c][ ][Set ID][ ][Data][Cr]
Data: Key code - Refer to page 129.
Ack
[c][ ][Set ID][ ][OK][Data][x]
136
Data
0
0
0
0
Input1
0
0
0
1
Input2
0
0
1
0
Input3
0
0
1
1
Input4
Ack
[b][ ][Set ID][ ][OK][Data][x]
0
Open source software notice
The following GPL executables and LGPL/MPL libraries used in this product are subject to the
GPL2.0/LGPL2.1/MPL1.1 License Agreements:
GPL EXECUTABLES:
• Linux kernel 2.6
• busybox
• lzo
LGPL LIBRARIES:
• uClibc
MPL LIBRARIES:
• Nanox
LG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of performing
such distribution, such as the cost of media, shipping and handling upon e-mail request to LG Electronics at:
opensource@lge.com
This offer is valid for a period of three(3) years from the date of the distribution of this product by LG
Electronics.
This software is based in part on the work of the Independent JPEG Group copyright © 1991 – 1998, Thomas
G. Lane.
APPENDIX
You can obtain a copy of the GPL, LGPL, MPL licenses from http://www.gnu.org/licenses/old-licenses/gpl2.0.html, http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html, http://www.mozilla.org/MPL/MPL-1.1.html.
Also you can obtain the translation of GPL, LGPL licenses from http://www.gnu.org/licenses/old-licenses/gpl2.0-translations.html, http://www.gnu.org/licenses/old-licenses/lgpl-2.1-translations.html.
This product includes
• libpng library : copyright © 2004 Glenn Randers-Pehrson
• Zlib compression library: Copyright © 1995-2002 Jean-loup Gailly and Mark Adler.
• Tinyxml library : copyright (c) 2000-2006 Lee Thomason
137
APPENDIX
OPEN SOURCE LICENSE
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU
General Public License is intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users. This General Public License applies to most of the Free
Software Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License
instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to
make sure that you have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it if you want it, that you can change the software or
use pieces of it in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software,
or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all
the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show
them these terms so they know their rights.
APPENDIX
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal
permission to copy, distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so that any problems introduced by others will not
reflect on the original authors' reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors
of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we
have made it clear that any patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it
may be distributed under the terms of this General Public License. The "Program", below, refers to any such program
or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that
is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into
another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is
addressed as "you".
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope.
The act of running the Program is not restricted, and the output from the Program
is covered only if its contents constitute a work based on the Program (independent of having been made by running
the Program). Whether that is true depends on what the Program does.
138
1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of
any warranty; and give any other recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in
exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the
Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you
also meet all of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any
change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the
Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this
License.
c) If the modified program normally reads commands interactively when run, you must cause it, when started running
for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may
redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception:
if the Program itself is interactive but does not normally print such an announcement, your work based on the
Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the
Program, and can be reasonably considered independent and separate works in themselves, then this License, and its
terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same
sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on
the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this
License.
APPENDIX
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of derivative or collective works based on the Program.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable
form under the terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under
the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than
your cost of physically performing source distribution, a complete machine-readable copy of the corresponding
source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software
interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This
alternative is allowed only for non-commercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to it. For an executable
work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs,
unless that component itself accompanies the executable.
139
APPENDIX
If distribution of executable or object code is made by offering access to copy from a designated place, then offering
equivalent access to copy the source code from the same place counts as distribution of the source code, even though
third parties are not compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License.
Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate
your rights under this License. However, parties who have received copies, or rights, from you under this License will
not have their licenses terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not
accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the
Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a
license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You
may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible
for enforcing compliance by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you
may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the
Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it
and this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances.
APPENDIX
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest
validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution
system, which is implemented by public license practices. Many people have made generous contributions to the wide
range of software distributed through that system in reliance on consistent application of that system; it is up to the
author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Program under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to
time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems
or concerns.
Each version is given a distinguishing version number. If the Program specifies a version number of this License which
applies to it and "any later version", you have the option of following the terms and conditions either of that version or of
any later version published by the Free Software Foundation. If the Program does not specify a version number of
this License, you may choose any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different,
write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to
the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals
of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software
generally.
140
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING
THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE
QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING
BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to
achieve this is to make it free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most
effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to
where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public
License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later
version.
You should have received a copy of the GNU General Public License along with this program; if not, write to the
Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
APPENDIX
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the
implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
Public License for more details.
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions;
type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License.
Of course, the commands you use may be called something other than `show w' and `show c'; they could even be
mouse-clicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer"
for the program, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker.
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into proprietary programs. If your program is a
subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is
what you want to do, use the GNU Lesser General Public License instead of this License.
141
APPENDIX
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301
USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not
allowed.
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public
License, version 2, hence the version number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU
General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the
software is free for all its users.
This license, the Lesser General Public License, applies to some specially designated software packages--typically
libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest
you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in
any particular case, based on the explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are
designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you
wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of
it in new free programs; and that you are informed that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to
surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the
library or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the
rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code
with the library, you must provide complete object files to the recipients, so that they can relink them with the library
after making changes to the library and recompiling it. And you must show them these terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which
gives you legal permission to copy, distribute and/or modify the library.
APPENDIX
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the
library is modified by someone else and passed on, the recipients should know that what they have is not the original
version, so that the original author's reputation will not be affected by problems that might be introduced by others.
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a
company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder.
Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom
of use specified in this license.
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license,
the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary
General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free
programs.
When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits
such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more
lax criteria for linking other code with the library.
We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the
ordinary General Public License. It also provides other free software developers Less of an advantage over competing
non-free programs. These disadvantages are the reason we use the ordinary General Public License for many
libraries. However, the Lesser license provides advantages in certain special circumstances.
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library,
so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more
frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to
gain by limiting the free library to free software only, so we use the Lesser General Public License.
In other cases, permission to use a particular library in non-free programs enables a greater number of people to use
a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many
more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.
142
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a
program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library.
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library". The former contains code derived from
the library, whereas the latter must be combined with the library in order to run.
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other program which contains a notice placed by the
copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public
License (also called "this License"). Each licensee is addressed as "you".
A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables.
The "Library", below, refers to any such software library or work which has been distributed under these terms. A
"work based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work
containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into
another language. (Hereinafter, translation is included without limitation in the term "modification".)
"Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete
source code means all the source code for all modules it contains, plus any associated interface definition files, plus
the scripts used to control compilation and installation of the library.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope.
The act of running a program using the Library is not restricted, and output from such a program is covered only if its
contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether
that is true depends on what the Library does and what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library.
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library,
and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all
of these conditions:
APPENDIX
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection
in exchange for a fee.
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of
any change.
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this
License.
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program
that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good
faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates,
and performs whatever part of its purpose remains meaningful.
(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of
the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function
must be optional: if the application does not supply it, the square root function must still compute square roots.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the
Library, and can be reasonably considered independent and separate works in themselves, then this License, and its
terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same
sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
143
APPENDIX
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of derivative or collective works based on the Library.
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the
Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy
of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU
General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU
General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other
change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License
applies to all subsequent copies and derivative works made from that copy.
This option is useful when you wish to copy part of the code of the Library into a program that is not a library.
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a
medium customarily used for software interchange.
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent
access to copy the source code from the same place satisfies the requirement to distribute the source code, even
though third parties are not compelled to copy the source along with the object code.
5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being
compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative work of
the Library, and therefore falls outside the scope of this License.
However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library
(because it contains portions of the Library), rather than a "work that uses the library". The executable is therefore covered by this License. Section 6 states terms for distribution of such executables.
When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the
work may be a derivative work of the Library even though the source code is not.
Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library.
The threshold for this to be true is not precisely defined by law.
APPENDIX
If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and
small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it
is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under
Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of
Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with
the Library itself.
6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library
to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that
the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications.
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its
use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the
user to the copy of this License. Also, you must do one of these things:
a) Accompany the work with the complete corresponding machine-readable source code for the Library including
whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work
is an executable linked with the Library, with the complete machine-readable "work that uses the Library", as object
code and/or source code, so that the user can modify the Library and then relink to produce a modified executable
containing the modified Library. (It is understood that the user who changes the contents of definitions files in the
Library will not necessarily be able to recompile the application to use the modified definitions.)
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at
run time a copy of the library already present on the user's computer system, rather than copying library functions
into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as
long as the modified version is interface-compatible with the version that the work was made with.
144
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials
specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution.
d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to
copy the above specified materials from the same place.
e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.
For an executable, the required form of the "work that uses the Library" must include any data and utility programs
needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need
not include anything that is normally distributed (in either source or binary form) with the major components (compiler,
kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies
the executable.
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in
an executable that you distribute.
7. You may place library facilities that are a work based on the Library side-by-side in a single library together with
other library facilities not covered by this License, and distribute such a combined library, provided that the separate
distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that
you do these two things:
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other
library facilities. This must be distributed under the terms of the Sections above.
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and
explaining where to find the accompanying uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this
License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under
this License will not have their licenses terminated so long as such parties remain in full compliance.
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a
license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties with this License.
APPENDIX
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept
this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your
acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or
works based on it.
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you
may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the
Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and
this License would be to refrain entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest
validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution
system which is implemented by public license practices. Many people have made generous contributions to the wide
range of software distributed through that system in reliance on consistent application of that system; it is up to the
author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if written in the body of this License.
145
APPENDIX
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License
from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address
new problems or concerns.
Each version is given a distinguishing version number. If the Library specifies a version number of this License which
applies to it and "any later version", you have the option of following the terms and conditions either of that version or of
any later version published by the Free Software Foundation. If the Library does not specify a license version number,
you may choose any version ever published by the Free Software Foundation.
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software
Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing
and reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY,
TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF
ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY
AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU
ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT
NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU
OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries
APPENDIX
If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it
free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms
(or, alternatively, under the terms of the ordinary General Public License).
To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source
file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a
pointer to where the full notice is found.
<one line to give the library's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General
Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option)
any later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General
Public License for more details.
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to
the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Also add information on how to contact you by electronic and paper mail.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer"
for the library, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a library for tweaking knobs) written by
James Random Hacker.
<signature of Ty Coon>, 1 April 1990
Ty Coon, President of Vice
146
MOZILLA PUBLIC LICENSE
Version 1.1
--------------1. Definitions.
1.0.1. "Commercial Use" means distribution or otherwise making the Covered Code available to a third party.
1.1. "Contributor" means each entity that creates or contributes to the creation of Modifications.
1.2. "Contributor Version" means the combination of the Original Code, prior Modifications used by a Contributor,
and the Modifications made by that particular Contributor.
1.3. "Covered Code" means the Original Code or Modifications or the combination of the Original Code and
Modifications, in each case including portions thereof.
1.4. "Electronic Distribution Mechanism" means a mechanism generally accepted in the software development community for the electronic transfer of data.
1.5. "Executable" means Covered Code in any form other than Source Code.
1.6. "Initial Developer" means the individual or entity identified as the Initial Developer in the Source Code notice
required by Exhibit A.
1.7. "Larger Work" means a work which combines Covered Code or portions thereof with code not governed by the
terms of this License.
1.8. "License" means this document.
1.8.1. "Licensable" means having the right to grant, to the maximum extent possible, whether at the time of the initial grant or subsequently acquired, any and all of the rights conveyed herein.
1.9. "Modifications" means any addition to or deletion from the substance or structure of either the Original Code or
any previous Modifications. When Covered Code is released as a series of files, a Modification is:
A. Any addition to or deletion from the contents of a file containing Original Code or previous Modifications.
1.10. "Original Code" means Source Code of computer software code which is described in the Source Code notice
required by Exhibit A as Original Code, and which, at the time of its release under this License is not already
Covered Code governed by this License.
APPENDIX
B. Any new file that contains any part of the Original Code or previous Modifications.
1.10.1. "Patent Claims" means any patent claim(s), now owned or hereafter acquired, including without limitation,
method, process, and apparatus claims, in any patent Licensable by grantor.
1.11. "Source Code" means the preferred form of the Covered Code for making modifications to it, including all
modules it contains, plus any associated interface definition files, scripts used to control compilation and installation
of an Executable, or source code differential comparisons against either the Original Code or another well known,
available Covered Code of the Contributor's choice. The Source Code can be in a compressed or archival form,
provided the appropriate decompression or de-archiving software is widely available for no charge.
1.12. "You" (or "Your") means an individual or a legal entity exercising rights under, and complying with all of the
terms of, this License or a future version of this License issued under Section 6.1.
For legal entities, "You" includes any entity which controls, is controlled by, or is under common control with You.
For purposes of this definition, "control" means (a) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (b) ownership of more than fifty percent (50%) of the outstanding shares or beneficial ownership of such entity.
2. Source Code License.
2.1. The Initial Developer Grant.
The Initial Developer hereby grants You a world-wide, royalty-free, non-exclusive license, subject to third party intellectual property claims:
(a) under intellectual property rights (other than patent or trademark) Licensable by Initial Developer to use,
reproduce, modify, display, perform, sublicense and distribute the Original Code (or portions thereof) with or
without Modifications, and/or as part of a Larger Work; and
147
APPENDIX
(b) under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use,
practice, sell, and offer for sale, and/or otherwise dispose of the Original Code (or portions thereof).
(c) the licenses granted in this Section 2.1(a) and (b) are effective on the date Initial Developer first distributes
Original Code under the terms of this License.
(d) Notwithstanding Section 2.1(b) above, no patent license is granted: 1) for code that You delete from the
Original Code; 2) separate from the Original Code; or 3) for infringements caused by: i) the modification of the
Original Code or ii) the combination of the Original Code with other software or devices.
2.2. Contributor Grant.
Subject to third party intellectual property claims, each Contributor hereby grants You a world-wide, royalty-free,
non-exclusive license
(a) under intellectual property rights (other than patent or trademark) Licensable by Contributor, to use, reproduce, modify, display, perform, sublicense and distribute the Modifications created by such Contributor (or portions thereof) either on an unmodified basis, with other Modifications, as Covered Code and/or as part of a
Larger Work; and
(b) under Patent Claims infringed by the making, using, or selling of Modifications made by that Contributor
either alone and/or in combination with its Contributor Version (or portions of such combination), to make, use,
sell, offer for sale, have made, and/or otherwise dispose of: 1) Modifications made by that Contributor (or portions
thereof); and 2) the combination of Modifications made by that Contributor with its Contributor Version (or portions of such combination).
(c) the licenses granted in Sections 2.2(a) and 2.2(b) are effective on the date Contributor first makes
Commercial Use of the Covered Code.
(d) Notwithstanding Section 2.2(b) above, no patent license is granted: 1) for any code that Contributor has deleted from the Contributor Version; 2) separate from the Contributor Version; 3) for infringements caused by: i)
third party modifications of Contributor Version or ii) the combination of Modifications made by that Contributor
with other software (except as part of the Contributor Version) or other devices; or 4) under Patent Claims
infringed by Covered Code in the absence of Modifications made by that Contributor.
3. Distribution Obligations.
APPENDIX
3.1. Application of License.
The Modifications which You create or to which You contribute are governed by the terms of this License, including
without limitation Section 2.2. The Source Code version of Covered Code may be distributed only under the terms of
this License or a future version of this License released under Section 6.1, and You must include a copy of this
License with every copy of the Source Code You distribute. You may not offer or impose any terms on any Source
Code version that alters or restricts the applicable version of this License or the recipients' rights hereunder.
However, You may include an additional document offering the additional rights described in Section 3.5.
3.2. Availability of Source Code.
Any Modification which You create or to which You contribute must be made available in Source Code form under
the terms of this License either on the same media as an Executable version or via an accepted Electronic
Distribution Mechanism to anyone to whom you made an Executable version available; and if made available via
Electronic Distribution Mechanism, must remain available for at least twelve (12) months after the date it initially
became available, or at least six (6) months after a subsequent version of that particular Modification has been
made available to such recipients. You are responsible for ensuring that the Source Code version remains available
even if the
Electronic Distribution Mechanism is maintained by a third party.
3.3. Description of Modifications.
You must cause all Covered Code to which You contribute to contain a file documenting the changes You made to
create that Covered Code and the date of any change. You must include a prominent statement that the Modification
is derived, directly or indirectly, from Original Code provided by the Initial Developer and including the name of the
Initial Developer in (a) the Source Code, and (b) in any notice in an Executable version or related documentation in
which You describe the origin or ownership of the Covered Code.
3.4. Intellectual Property Matters
(a) Third Party Claims.
If Contributor has knowledge that a license under a third party's intellectual property rights is required to exercise
the rights granted by such Contributor under Sections 2.1 or 2.2, Contributor must include a text file with the
Source Code distribution titled "LEGAL" which describes the claim and the party making the claim in sufficient
detail that a recipient will know whom to contact. If Contributor obtains such knowledge after the Modification is
made available as described in Section 3.2, Contributor shall promptly modify the LEGAL file in all copies
Contributor makes available thereafter and shall take other steps (such as notifying appropriate mailing lists or
newsgroups) reasonably calculated to inform those who received the Covered Code that new knowledge has
been obtained.
148
(b) Contributor APIs.
If Contributor's Modifications include an application programming interface and Contributor has knowledge of
patent licenses which are reasonably necessary to implement that API, Contributor must also include this information in the LEGAL file.
(c) Representations.
Contributor represents that, except as disclosed pursuant to Section 3.4(a) above, Contributor believes that
Contributor's Modifications are Contributor's original creation(s) and/or Contributor has sufficient rights to grant
the rights conveyed by this License.
3.5. Required Notices.
You must duplicate the notice in Exhibit A in each file of the Source Code. If it is not possible to put such notice in a
particular Source Code file due to its structure, then You must include such notice in a location (such as a relevant
directory) where a user would be likely to look for such a notice. If You created one or more Modification(s)
You may add your name as a Contributor to the notice described in Exhibit A. You must also duplicate this License
in any documentation for the Source Code where You describe recipients' rights or ownership rights relating to
Covered Code. You may choose to offer, and to charge a fee for, warranty, support, indemnity or liability obligations
to one or more recipients of Covered Code. However, You may do so only on Your own behalf, and not on behalf of
the Initial
Developer or any Contributor. You must make it absolutely clear than any such warranty, support, indemnity or liability obligation is offered by You alone, and You hereby agree to indemnify the Initial Developer and every Contributor
for any liability incurred by the Initial Developer or such Contributor as a result of warranty, support, indemnity or liability terms You offer.
3.6. Distribution of Executable Versions.
You may distribute Covered Code in Executable form only if the requirements of Section 3.1-3.5 have been met for
that Covered Code, and if You include a notice stating that the Source Code version of the Covered Code is available under the terms of this License, including a description of how and where You have fulfilled the obligations of
Section 3.2. The notice must be conspicuously included in any notice in an Executable version, related documentation or collateral in which You describe recipients' rights relating to the Covered Code. You may distribute the
Executable version of Covered Code or ownership rights under a license of Your choice, which may contain terms
different from this License, provided that You are in compliance with the terms of this License and that the license
for the Executable version does not attempt to limit or alter the recipient's rights in the Source Code version from
the rights set forth in this
License. If You distribute the Executable version under a different license You must make it absolutely clear that any
terms which differ from this License are offered by You alone, not by the Initial Developer or any Contributor. You
hereby agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial
Developer or such Contributor as a result of any such terms You offer.
4. Inability to Comply Due to Statute or Regulation.
APPENDIX
3.7. Larger Works.
You may create a Larger Work by combining Covered Code with other code not governed by the terms of this
License and distribute the Larger Work as a single product. In such a case, You must make sure the requirements
of this License are fulfilled for the Covered Code.
If it is impossible for You to comply with any of the terms of this License with respect to some or all of the Covered
Code due to statute, judicial order, or regulation then You must: (a) comply with the terms of this License to the maximum extent possible; and (b) describe the limitations and the code they affect. Such description must be included in
the LEGAL file described in Section 3.4 and must be included with all distributions of the Source Code. Except to
the
extent prohibited by statute or regulation, such description must be sufficiently detailed for a recipient of ordinary
skill to be able to understand it.
5. Application of this License.
This License applies to code to which the Initial Developer has attached the notice in Exhibit A and to related
Covered Code.
6. Versions of the License.
6.1. New Versions.
Netscape Communications Corporation ("Netscape") may publish revised and/or new versions of the License from
time to time. Each version will be given a distinguishing version number.
6.2. Effect of New Versions.
Once Covered Code has been published under a particular version of the License, You may always continue to use
it under the terms of that version. You may also choose to use such Covered Code under the terms of any subsequent version of the License published by Netscape. No one other than Netscape has the right to modify the terms
applicable to Covered Code created under this License.
149
APPENDIX
6.3. Derivative Works.
If You create or use a modified version of this License (which you may only do in order to apply it to code which is
not already Covered Code governed by this License), You must (a) rename Your license so that the phrases
"Mozilla", "MOZILLAPL", "MOZPL", "Netscape", "MPL", "NPL" or any confusingly similar phrase do not appear in
your license (except to note that your license differs from this License) and (b) otherwise make it clear that Your version of the license contains terms which differ from the Mozilla Public License and Netscape Public License. (Filling
in the name of the Initial Developer, Original Code or Contributor in the notice described in Exhibit A shall not of
themselves be deemed to be modifications of this License.)
7. DISCLAIMER OF WARRANTY.
COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE IS WITH YOU.
SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL DEVELOPER OR
ANY OTHER CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION.
THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY
COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER.
8. TERMINATION.
8.1. This License and the rights granted hereunder will terminate automatically if You fail to comply with terms herein and fail to cure such breach within 30 days of becoming aware of the breach. All sublicenses to the Covered
Code which are properly granted shall survive any termination of this License. Provisions which, by their nature,
must remain in effect beyond the termination of this License shall survive.
8.2. If You initiate litigation by asserting a patent infringement claim (excluding declatory judgment actions) against
Initial Developer or a Contributor (the Initial Developer or Contributor against whom You file such action is referred
to as "Participant") alleging that:
APPENDIX
(a) such Participant's Contributor Version directly or indirectly infringes any patent, then any and all rights granted
by such Participant to You under Sections 2.1 and/or 2.2 of this License shall, upon 60 days notice from Participant
terminate prospectively, unless if within 60 days after receipt of notice You either: (i) agree in writing to pay
Participant a mutually agreeable reasonable royalty for Your past and future use of Modifications made by such
Participant, or (ii) withdraw Your litigation claim with respect to the Contributor Version against such Participant. If
within 60 days of notice, a reasonable royalty and payment arrangement are not mutually agreed upon in writing by
the parties or the litigation claim is not withdrawn, the rights granted by Participant to You under Sections 2.1 and/or
2.2 automatically terminate at the expiration of the 60 day notice period specified above.
(b) any software, hardware, or device, other than such Participant's Contributor Version, directly or indirectly
infringes any patent, then any rights granted to You by such Participant under Sections 2.1(b) and 2.2(b) are
revoked effective as of the date You first made, used, sold, distributed, or had made, Modifications made by that
Participant.
8.3. If You assert a patent infringement claim against Participant alleging that such Participant's Contributor Version
directly or indirectly infringes any patent where such claim is resolved (such as by license or settlement) prior to the
initiation of patent infringement litigation, then the reasonable value of the licenses granted by such Participant
under Sections 2.1 or 2.2 shall be taken into account in determining the amount or value of any payment or license.
8.4. In the event of termination under Sections 8.1 or 8.2 above, all end user license agreements (excluding distributors and resellers) which have been validly granted by You or any distributor hereunder prior to termination shall
survive termination.
9. LIMITATION OF LIABILITY.
UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL DEVELOPER, ANY OTHER CONTRIBUTOR, OR
ANY DISTRIBUTOR OF COVERED CODE,OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY
PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER
INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER
FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH
PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULTING FROM SUCH PARTY'S
NEGLIGENCE TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO
NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS
EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU.
150
10. U.S. GOVERNMENT END USERS.
The Covered Code is a "commercial item," as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of
"commercial computer software" and "commercial computer software documentation," as such terms are used in 48
C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June
1995), all U.S. Government End Users acquire Covered Code with only those rights set forth herein.
11. MISCELLANEOUS.
This License represents the complete agreement concerning subject matter hereof. If any provision of this License
is held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This
License shall be governed by California law provisions (except to the extent applicable law, if any, provides otherwise),
excluding its conflict-of-law provisions. With respect to disputes in which at least one party is a citizen of, or an entity
chartered or registered to do business in the United States of America, any litigation relating to this License shall be
subject to the jurisdiction of the Federal Courts of the Northern District of California, with venue lying in Santa Clara
County, California, with the losing party responsible for costs, including without limitation, court costs and reasonable
attorneys' fees and expenses. The application of the United Nations Convention on Contracts for the International Sale
of Goods is expressly excluded. Any law or regulation which provides that the language of a contract shall be construed
against the drafter shall not apply to this License.
12. RESPONSIBILITY FOR CLAIMS.
As between Initial Developer and the Contributors, each party is responsible for claims and damages arising, directly or indirectly, out of its utilization of rights under this License and You agree to work with Initial Developer and
Contributors to distribute such responsibility on an equitable basis. Nothing herein is intended or shall be deemed to
constitute any admission of liability.
13. MULTIPLE-LICENSED CODE.
Initial Developer may designate portions of the Covered Code as "Multiple-Licensed". "Multiple-Licensed" means
that the Initial Developer permits you to utilize portions of the Covered Code under Your choice of the NPL or the alternative licenses, if any, specified by the Initial Developer in the file described in Exhibit A.
EXHIBIT A -Mozilla Public License.
Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND,
either express or implied. See the License for the specific language governing rights and limitations under the License.
APPENDIX
``The contents of this file are subject to the Mozilla Public License Version 1.1 (the "License"); you may not use this
file except in compliance with the License. You may obtain a copy of the License at http://www.mozilla.org/MPL/
The Original Code is ______________________________________.
The Initial Developer of the Original Code is ________________________.
Portions created by ______________________ are Copyright (C) ______
_______________________. All Rights Reserved.
Contributor(s): ______________________________________.
Alternatively, the contents of this file may be used under the terms of the _____ license (the "[___] License"), in
which case the provisions of [______] License are applicable instead of those above. If you wish to allow use of your
version of this file only under the terms of the [____] License and not to allow others to use your version of this file
under the MPL, indicate your decision by deleting the provisions above and replace them with the notice and other
provisions required by the [___] License. If you do not delete the provisions above, a recipient may use your version of
this file under either the MPL or the [___] License."
[NOTE: The text of this Exhibit A may differ slightly from the text of the notices in the Source Code files of the
Original Code. You should use the text of this Exhibit A rather than the text found in the Original Code Source Code for
Your Modifications.]
151
Download PDF

advertising