LG | CT-29K37E | LG CT-29K37E Owner’s Manual

Colour Television
OWNER'S MANUAL
Please read this manual
carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
information to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828VA0319D
(MC007A,
and quote this
require service.
cover
083A/D/061Z TX,
486-395A)
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel / Side panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view / Mute function
Auto Demonstration / On screen language selection
7
On
(option)
8
screen menus
Menu selection
up TV stations
Auto programme tuning
Manual programme tuning
Fine Tuning
Programme edit
Calling the programme table
9
Setting
Picture adjustment
Picture adjustment / Eye (option) / Picture format
Turbo picture selection (option)
14
Sound adjustment
Sound adjustment / Turbo sound selection
Stereo / Dual reception (option)
NICAM reception (option)
Sound output selection
16
Other functions
TV and AV modes / Auto AV switching
Child lock / Auto sleep / Blue back
Tilt (option) / Game (option)
Degaussing (option) / Sleep timer
PIP
(option)
18
(option)
operation (option)
21
Teletext (option)
Switch on / off
SIMPLE text
TOP text (option)
FASTEXT mode
Special teletext functions
22
Connection of external equipment
Aerial socket
Audio/Video in/out sockets (option)
Euro scart socket (option)
S-video / Audio in sockets (S-AV) (option)
Headphone socket (option)
25
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture (option)
Sub picture size / Sub picture freeze
Sub picture position change / 9 or 4 sub picture
Troubleshooting
2
check list
27
Installation
Power
This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms
ial and mains
or
powercuts, please pull
out the aer-
plugs.
Warning
To prevent fire
moisture.
or
shock hazard, do not expose the set to rain
or
Service
Never
remove
the back
high voltage
properly, unplug it
very
cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω
cover.
For the best
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
the
set is
placed
the ventilation
in
position to allow a free flow
openings on the back cover.
a
of air. Do not
cover
3
Location and function of controls
All the functions
Some functions
panel of the set.
POWER
be controlled with the remote control handset.
also be adjusted with the buttons on the front
Remote control handset
MUTE
10
1
ARC
2
can
can
2
3
4
5
6
11
1
Before you use the remote control handset,
teries. See the next page.
please
install the bat-
TV/AV
12
1.
SOUND
7
8
9
MENU
PICTURE
2.
TURBO
PR
VOL
4
3.
VOL
OK
from
standby
or
off to
NUMBER BUTTONS
switches the set on from
standby
or
directly
on
standby.
13
0
3
POWER
switches the set
MENU
selects
select
a
a menu.
PR
5
REW
PLAY
FF
P/STILL
STOP
REC
4.
LIST
14
6
PSM
EYE/
TEXT/
16
TIME
REVEAL
? SLEEP
SIZE
STILL
POSITION
9/4PIP
M
17
9
PR-
PR+
SWAP
or
displays
the current mode.
5.
VCR BUTTONS (option)
control a LG video cassette recorder.
6.
SSM (Sound Status Memory)
recalls your preferred sound setting.
7.
PSM (Picture Status
recalls your preferred
8.
EYE/* (option)
switches the eye function
i
INPUT
settings.
accepts your selection
PIP
MIX
menu
OK
15
7
8
adjusts
I/II
SSM
D / E (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
F / G (Volume Up/Down)
adjusts the volume.
18
Memory)
picture setting.
on or
off.
(With teletext / PIP)
9.
EYE/
MIX
TELETEXT BUTTONS (option)
These buttons are used for teletext.
For further details, see the 'Teletext' section.
TEXT/
TIME
REVEAL
? SLEEP
10. MUTE
switches the sound
M
9
on or
off.
i
11. ARC
(Aspect Ratio Control)
changes the picture format.
Q.VIEW
18
(With teletext / Without PIP)
12. TV/AV
selects TV or AV mode.
clears the menu / text from the screen.
switches the set on from standby.
13. TURBO PICTURE / SOUND BUTTON
selects Turbo picture / sound.
4
number.
Location and function of controls
14. LIST
displays
the programme table.
15. I/II
selects the language during dual
selects the sound output.
language
broadcast
(option).
16. PIP BUTTONS (option)
PIP
switches the sub picture on or off.
PR +/selects a programme for the sub picture.
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
9/4 PIP
switches on or off the 9 or 4 sub pictures.
POWER
MUTE
10
1
2
1
2
3
4
5
6
7
8
9
TV/AV
MENU
12
0
3
PR
4
VOL
VOL
OK
17. SLEEP
sets the
sleep
timer.
Q.VIEW
LIST
PR
14
18
18. SWAP
or
Q.VIEW
returns to the
previously
viewed programme.
11
COLOURED BUTTONS
These buttons are used for teletext
programme edit.
EYE/
(only
TELETEXT
models)
or
ARC
I/II
SSM
SLEEP
15
8
PSM
17
7
6
Battery
installation
PICTURE SOUND
TURBO
The remote control handset is powered by two AAA type batteries. 13
To load the batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by
the polarity symbols ( + and
) marked inside the compartment.
-
(Without teletext / PIP)
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
5
Location and function of controls
Front
panel
CT-29Q26/27 series
CT-25Q26/27 series
11
10
S-VIDEOL/MN
POWER
STAND BY
POWER
MENU
AUDIO
R
1
AV3
OK
MENU
PR
VOL
12
46823
CT-25/29H46/47 series
OK
VOL
PR
468
1
12
23
CT-29K36/37 series
S-VIDEO
10
VIDEO
VIDEO L/MONO AUDIO R
TV/AV
L
AV3
POWER
POWER
(L/MONO)
MENU
OK
VOL
VOL
PR
PR
AV3
R
AUDIO
11
23
1
12
468
12357 9
12
10 11
CT-29M30/32 series
CT-25/29H36/37 series
11
AV3
MENU
OK
VOL
PR
AV3
TV/AV
VIDEO (L/MONO) AUDIO (R)
POWER
POWER
STAND-BY
VIDEO
10
VOL
PR
L
MONO
AUDIO
R
23468
1
1012
123579
Side Panel
1.
2.
MAIN POWER
switches the set
on or
off.
POWER/STANDBY INDICATOR
illuminates brightly when the set is in
mode.
dims when the set is switched on.
standby
8. D / E (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
F / G (Volume Down/Up)
adjusts the volume.
adjusts
menu
settings.
9. +/-
(D/E)
adjusts the
3. REMOTE CONTROL SENSOR
4.
MENU
selects
function or selects a programme.
switches the set on from standby.
10.AUDIO/VIDEO IN SOCKETS (AV3)
Connect the audio/video out sockets of external equipment to these sockets.
S-VIDEO/AUDIO IN SOCKETS (S-AV) (option)
Connect the video out socket of an S-VIDEO
VCR to the S-VIDEO socket.
Connect the audio out sockets of the S-VIDEO
VCR to the audio sockets as in AV3.
a menu.
5. TV/AV
selects TV
or AV mode.
clears the menu from the screen.
switches the set on from standby.
6. OK
accepts your selection
or
displays
the current
mode.
7.
(Function)
selects volume, EYE (option), picture items or
brief auto programme while the menus not dis-
play.
6
11.HEADPHONE SOCKET (option)
Connect the headphone plug to this socket.
12.EYE
(option)
adjusts picture according
conditions.
to the
surrounding
Basic
operation
On and off
1.
2.
3.
4.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, D / E, TV/AV or
NUMBER buttons on the remote control handset to switch it on fully.
Press the POWER button on the remote control handset.
The set reverts to standby mode.
Press the main power button again to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
POWER
Programme
selection
You can select
buttons.
a
programme number with the D / E
or
NUMBER
MUTE
1
2
3
4
5
6
7
8
9
TV/AV
SOUND
Volume
adjustment
Press the F / G button to
MENU
adjust
0
the volume.
TURBO
PR
Quick view
VOL
Press the SWAP
were
or
Q.VIEW button to view the last programme you
OK
VOL
PR
watching.
Mute function
Press the MUTE button. The sound is switched off and the
W appears.
You can cancel it
SOUND button.
by pressing
display
the MUTE, F / G, SSM, I/II, TURBO
SSM
I/II
Auto Demonstration
To review all the menus programmed in the set, press the OK
or
button of the front panel control for about 5 seconds. To
stop auto demonstration, press any button of the front panel
control and POWER button of the remote control.
On
screen
language
selection
The menu can be displayed
First select your language.
1.
2.
3.
4.
5.
6.
Press the
Press the
Press the
Press the
Press the
All the on
Press the
on
the
SWAP
(option)
screen
in desired
language.
MENU button to select the Station menu.
D / E button to select Language.
OK button.
D / E button to select your desired language.
OK button.
screen displays will appear in the selected language.
TV/AV button to return to normal TV viewing.
7
On
screen menus
The
an
dialogue
operator
also
between you and your set takes place on screen with
The buttons required for the operating steps are
menu.
displayed.
Menu selection
1.
2.
the MENU button to display each menu.
Press the D / E button to select a menu item.
The selected menu item changes from white to red.
3. Press the F / G button to change the setting of a menu item or
OK button to display the sub menu.
Note :
In the AV mode, the Station menu is not displayed.
a.
b. In the teletext mode, menus are not displayed.
In some models, the Normal/Turbo search will not display,
c.
only the Start will display in the Auto programme menu.
d. In some models, Tilt, Game or Degauss will not display.
In some models, the Language will not display.
e.
MENU
Repeatedly press
AutoOprogramme
ManualOprogramme
System
StorageOfrom
ProgrammeOedit
NormalOsearch
Language
TurboOsearch
BG
1
PR
VOL
OK
VOL
()OOKOMENUOTV
AV
Station
PR
()O}{OMENUOTV
AV
menu
Contrast
100
BG
System
Brightness
55
ChannelOOOOV
Colour
60
Fine
Sharpness
50
Search
Tint
0
UHF
20
{{{
NameOOOOOOOOOOOC
20
1
Storage
()O}{OOKOMENUOTV
Picture
AV
()O}{OOKOMENUOTV
AV
menu
O0OOCO03 OOO5OOSO69
Equalizer
Balance
AVL
§Volume
0
O1OOCO03OOO6OOSO17
Off
O2OOCO12OOO7OOSO22
30
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
DeleteOOOCopy
MoveOOOOOSkip
()OOKOMENUOTV
AV
Sound
()O}{OOKOMENUOTV
TV
Input
ChildOlock
Off
AutoOsleep
Off
BlueOback
Off
Tilt
AV
menu
0
Flat
Music
Movie
Speech
User
Game
Off
Degauss
()O}{OMENUOTV
AV
Special
TV programme
8
0.1O0.5O1.5O5.0O10OkHz
()OMENUOTV
menu
AV
Setting up
TV stations
Up to 100 TV stations can be stored in this set by programme numbers
(0 to 99). Once you have preset the stations, you will be able to use
the D / E or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Auto programme
ProgrammeOedit
Language
tuning
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this
set.
1.
2.
3.
Station
Menu
AutoOprogramme
ManualOprogramme
()OOKOMENUOTV
AV
the MENU button to select the Station menu.
Press the D / E button to select Auto programme.
Press the OK button to display the Auto programme menu.
Repeatedly press
BG
System
StorageOfrom
1
NormalOsearch
TurboOsearch
1
2
3
4
5
6
7
8
TV/AV
()O}{O MENUOTV
4.
5.
6.
7.
AV
Press the D / E button to select System. Select a TV system
with the F / G button;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines)
Press the D / E button to select Storage from.
Select the beginning programme number with the F / G button
or NUMBER buttons. Any number under 10 is entered with a
numeric '0' in front of it, i.e. '05' for 5.
Press the D / E button to select Normal or Turbo search.
Option:
In
some
models, Only
can
9
MENU
0
PR
VOL
OK
VOL
PR
select Start.
Note :
a.
Turbo search is further faster than Normal search and in
some models, these searches will automatically store all receivable stations.
b. If the programmed station has poor quality sound, select the
system again in the Manual programme menu.
8. Press the OK button to begin auto programming.
BG
System
StorageOfrom
NormalOsearch
1
NormalOsearch
TurboOsearch
2
BG
System
StorageOfrom
1
CO15
TurboOsearch
2%
CO38
2
MENU
2%
MENU
(Normal search)
All receivable stations
(Turbo search)
are
stored.
Option: In Australia, if no station name can be assigned to a
folstation, the channel number is assigned and stored as
-----
lowed
assign
number see
the station name.
by
a
'Assigning
a
station name' section to
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
9.
Press the TV/AV button to return to normal TV
viewing.
9
Setting up
Station
Menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Language
()OOKOMENUOTV
AV
TV stations
Manual programme
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
2.
3.
the MENU button to select the Station menu.
Press the D / E button to select Manual programme.
Press the OK button to display the Manual programme
Repeatedly press
menu.
BG
System
ChannelOOOOV
UHF
Fine
20
{{{
Search
NameOOOOOOOOOOOC
1
2
3
4
5
6
7
8
9
AV
4.
Press the D / E button to select System. Select
with the F / G button;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines)
5.
Press the D / E button to select Channel. Press the F / G
button to select V/UHF or Cable as required.
If possible, select the channel number (1 to 69) directly with the
number buttons. Any number under 10 is entered with a numeric '0' in front of it, i.e. '05' for 5.
Press the D / E button to select Search. Press the F / G button to commence searching. If a station is found the search will
0
PR
OK
1
()O}{O OKOMENUOTV
MENU
VOL
20
Storage
VOL
PR
6.
a
TV
system
stop.
7.
8.
If this station is the one required, press the D / E button to
select Storage. Select the desired programme number (0 to
99) with the F / G button or NUMBER buttons. Any number
under 10 is entered with a numeric '0' in front of it, i.e. '05' for
5.
Press the OK button to store it. The display Stored will appear.
BG
System
ChannelOOOOV
UHF
Fine
20
{{{
Search
NameOOOOOOOOOOOC
Storage
20
1
Stored
9.
10
To store another station, repeat steps 4 to 8.
Setting up
Assigning a station name
1. Repeat the 'Manual programme tuning' steps
2.
3.
4.
5.
Fine
3.
Station
Menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Language
()OOKOMENUOTV
AV
viewing.
tuning
Normally
1.
1 to 3.
Press the D / E button to select Name.
Press the G button. You can use a blank, +, -, the numeric 0 to 9
and the alphabet A to Z.
With the F button you can select in the opposite direction.
Select the next position by pressing the OK button and then take
your choice of the second character, and so on.
Repeat the 'Manual programme tuning' steps 7 to 8.
Press the TV/AV button to return to normal TV
2.
TV stations
fine
tuning
is
only necessary
if
reception
is poor.
the 'Manual programme tuning' steps 1 to 3.
Press the D / E button to select Fine.
Press the F / G button to fine tune for the best picture and
sound.
1
2
3
4
5
6
7
8
TV/AV
Repeat
9
MENU
0
TURBO
PR
BG
System
ChannelOOOOV
UHF
Fine
20
{{{
VOL
OK
VOL
Search
NameOOOOOOOOOOOC
()O}{O OKOMENUOTV
4.
5.
20
1
Storage
PR
AV
the 'Manual programme tuning' steps 7 to 8.
Press the TV/AV button to return to normal TV viewing.
The finely tuned programme will be indicated by yellow number
during programme selection.
Repeat
11
Setting up
Station
Menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Language
()OOKOMENUOTV
AV
Programme
TV stations
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
2.
3.
the MENU button to select the Station menu.
Press the D / E button to select Programme edit.
Press the OK button to display the Programme edit menu.
Repeatedly press
O0OOCO03 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
DeleteOOOCopy
MoveOOOOOSkip
1
2
()O}{OOKOMENUOTV
3
AV
TV/AV
4
5
7
6
8
Deleting
1.
2.
9
MENU
0
TURBO
a programme
Select a programme to be deleted with the D / E or F / G button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
PR
Copying
VOL
OK
VOL
1.
2.
PR
a programme
Select a programme to be copied with the D / E
Press the GREEN button.
All the following programmes are shifted down
or F
one
/ G button.
position.
Moving
1.
2.
3.
a programme
Select a programme to be moved with the D / E or F / G button.
Press the YELLOW button.
Move the programme to the desired programme number with
theD/EorF/Gbutton.
4.
Press the YELLOW button
again
to release this function.
O0OOCO03 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
Move0off
()O}{OMENUOTV
AV
a programme number
Select a programme number to be skipped with the D / E or F / G
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped pro-
Skipping
1.
2.
3.
gramme.
When a programme number is skipped it means that you will be
unable to select it using the D / E button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Press the TV/AV button to return to normal TV
12
viewing.
Setting up
Calling
TV stations
the programme table
can check the programmes stored in the memory
the programme table.
You
Displaying programme
table
Press the LIST button to
display
the
Programme
by displaying
table
menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
O0OOCO03 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
TV/AV
()O}{OOKOMENUOTV
Note
AV
:
a.
You may find some blue programmes. They have been set up to
be skipped by auto programming or in the programme edit mode.
b.
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
TURBO
PR
VOL
a programme in the programme table
programme with the D / E or F / G button.
Then press the OK button.
OK
VOL
Selecting
Select
a
PR
The set switches to the chosen programme number.
a programme table
10 programme table pages in which contain 100 pro-
Paging through
There
are
grammes.
Pressing the D / E
or F
/ G button
repeatedly
Press the TV/AV button to return to normal TV
LIST
turns the pages.
viewing.
13
Picture
Picture
Menu
Contrast
100
Brightness
55
Colour
60
Sharpness
50
Tint
0
()O}{O OKOMENUOTV
AV
Picture
You
can
ness
1.
2.
3.
adjustment
adjustment
adjust picture contrast, brightness, colour intensity, sharp(NTSC input only) to the levels you prefer.
and tint
the MENU button to select the Picture menu.
Press the D / E button to select the desired picture item.
Press the F / G button to make appropriate adjustments.
Repeatedly press
Contrast
80
4. Press the OK button to store it for the picture User.
To recall your preferred setting, press the PSM button until the
desired picture (Dynamic, Standard, Mild, Game or User)
appears. The picture Dynamic, Standard, Mild and Game are
programmed for good picture reproduction at the factory and cannot be changed.
SOUND
MENU
PICTURE
Eye (option)
TURBO
PR
VOL
OK
PR
VOL
Eye is an optional function. Only a set with eye option can perform
this function.
In some models, the set will automatically adjust the picture according to the surrounding conditions. This will enable you to enjoy the
most suitable picture according to the surroundings.
Press the EYE/* button to switch the eye function
on or
off.
PSM
EYE/
Off
When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.
in green does not appear continuously
At this time the display
in yellow appears each time the picture condibut the display
tion changes.
: If you press the PSM or TURBO PICTURE button with the
eye function, the eye function is automatically switched off.
Note
14
Picture
adjustment
Picture format
Contrast
watch TV in various picture formats; Standard, 16:9
(Wide), Zoom 1 or Zoom 2.
Repeatedly press the ARC button to select your desired picture for-
You
can
100
Brightness
55
Colour
60
Sharpness
50
Tint
Picture
Menu
0
mat.
()O}{O OKOMENUOTV
Standard
This picture format is 4 to 3 of
general
AV
TV.
16:9
You can
enjoy the cinema (the picture format of 16:9) or general TV
programme through the 16:9 mode.
The screen 16:9 is viewed just like that but the screen 4:3 is magnified to the left and right so that the screen 16:9 is full.
ARC
Zoom 1
You can enjoy the cinema in a vast screen through the Zoom mode.
The screen 4:3 is magnified to the upper/lower and left/right sides
so that the screen 16:9 is full. The bottom and top of the picture
may be lost.
PICTURE
Zoom 2
You can enjoy more magnified screen in this mode. The screen
Zoom 2 is viewed just like that but the screen 16:9 is magnified to
the upper and lower so that the screen Zoom 2 is full.
TURBO
Note :
a. When you switch the set to standby or off, the 16:9 or Zoom picture format is reset to the Standard (4:3).
b. In the 1/2 size sub picture and vertical four sub pictures of PIP
mode the picture format is not available.
Turbo
picture
selection
(option)
PSM
When this function is on, picture will be more brilliant and distinct
picture than normal picture. You can enjoy the Turbo picture so
much better than normal picture.
Repeatedly press the TURBO PICTURE button to switch on or off.
(Turbo Picture off)
Note
:
If you press the PSM
EYE/
(Turbo Picture on)
or
EYE/* button with the Turbo
picture
function, the Turbo picture function is automatically switched off.
15
Sound
Sound
Menu
Sound
Equalizer
Balance
0
AVL
Off
30
§Volume
You
adjustment
adjustment
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of equalizer,
balance, headphone volume/sound (option). If you switch AVL to on,
the set automatically keeps on an equal volume level even if you
change programmes. The Turbo sound creates an all around sound
as in a concert hall.
can
Speech
()OOKOMENUOTV
AV
1.
2.
3.
the MENU button to select the Sound menu.
Press the D / E button to select the desired sound item; Equalizer,
Balance, AVL or §Volume (option).
Press the F / G button to make desired adjustment.
Press the OK button in Equalizer to set the Equalizer User.
Repeatedly press
Flat
Music
Movie
TV/AV
Speech
User
SOUND
0.1O0.5O1.5O5.0O10OkHz
MENU
()O}{OOKOMENUOTV
AV
TURBO
PR
VOL
OK
PR
Select User by pressing the D / E button.
b. Select a sound band by pressing the F / G button.
c. Make appropriate sound level with the D / E button.
d. Press the OK button to store it for the sound User.
The display Stored appears.
a.
VOL
Press the TV/AV button to return to normal TV
SSM
viewing.
To recall your preferred setting, press the SSM button until the
desired sound (Flat, Music, Movie, Speech or User) appears.
The sound Flat, Music, Movie and Speech are programmed for
good sound reproduction at the factory and cannot be changed.
If you press the SSM button after making appropriate adjustdisplay User automatically appears even
though you have already set a factory preset setting; Flat, Music,
Movie or Speech.
Note
:
ment in Sound menu, the
Turbo sound selection
(option)
When this function is on, sound will be more emphasized and
amplified sound than normal sound. You can enjoy the Turbo
Sound so much better than normal Sound.
Repeatedly press the TURBO SOUND button to switch on or off.
(Turbo Sound off)
16
(Turbo Sound on)
Sound
Stereo/Dual
adjustment
reception (option)
Stereo/dual is an optional function.
When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button twice again.
selection for dual language broadcast
If a programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II button repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
Language
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
If your set is equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
2.
3.
I/II
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
Sound output selection
In AV mode, you
can
select output sound for the left and
right
loud-
speakers.
Repeatedly press the I/II button to select the sound output.
:
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loudspeaker.
L+L :
Audio signal from audio L input is sent to left and right loudspeakers.
R+R :
Audio signal from audio R input is sent to left and right loudspeakers.
L+R
17
Other functions
Special
TV
Input
Menu
ChildOlock
Off
AutoOsleep
Off
BlueOback
Off
Tilt
0
TV and AV modes
Inputs can be set for TV or AV mode. AV mode is used when a video
cassette recorder (VCR), or other equipment is connected to the set.
Game
Off
Degauss
()O}{O MENUOTV
AV
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
2.
3.
1
2
3
4
5
6
7
8
the MENU button to select the
Press the D / E button to select Input.
Repeatedly press
Special
menu.
PresstheF/GbuttontoselectTV,AV1,AV2,AV3(orS-AV).
The AV modes are :
AV1 : VCR connected to the Euro scart socket or phone jack of
the set
AV2 : VCR connected to the phone jack of the set
AV3 : VCR connected to the AV3 sockets of the set
S-AV : S-VIDEO VCR connected to the S-VIDEO sockets of the
set
TV/AV
(option)
To return to TV mode, press the D / E
9
Alternatively you
MENU
can
select the TV
or
or
NUMBER buttons.
AV mode
by pressing
the
TV/AV button.
0
TURBO
PR
VOL
Auto AV
VOL
PR
switching (option)
If your VCR outputs switching voltage when it is switched to playback with the VCR connected to the Euro scart socket. The set is
automatically switched to AV 1 mode when an AV signal is input.
But if you want to keep on watching TV mode, press the D / E or
NUMBER buttons.
Press the TV/AV button to return to AV modes.
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
2.
3.
4.
the MENU button to select the Special menu.
Press the D / E button to select Child lock.
Press the F / G button on the remote control handset to select On.
Press the TV/AV button to return to normal TV viewing.
Repeatedly press
With the lock on, the display Child lock on appears on the screen
if any button on the front panel is pressed while viewing the TV.
Note : The display Child lock on will not appear on the screen if
any button on the front panel is pressed while displaying the menus.
Auto
sleep
If you select Auto sleep On the set will automatically switch itself
to standby mode approximately ten minutes after a TV station stops
broadcasting.
1.
2.
3.
4.
18
the MENU button to select the Special
Press the D / E button to select Auto sleep.
Press the F / G button to select On.
Press the TV/AV button to return to normal TV viewing.
Repeatedly press
menu.
Other functions
Blue back
If you select Blue back On, the blue background appears
screen when there is no or poor signal.
1.
2.
3.
4.
the MENU button to select the Special
Press the D/E button to select Blue back.
Press the F /G button to select On or Off.
Press the TV/AV button to return to normal TV viewing.
Repeatedly press
Tilt
on
the
Off
AutoOsleep
Off
BlueOback
Off
Tilt
Special
Menu
0
Game
Off
Degauss
menu.
()O}{O MENUOTV
AV
(option)
The TV
another
1.
2.
3.
4.
TV
Input
ChildOlock
picture may tilt to the
position. This function
left
can
or right if the TV set moves to
be used to compensate the tilt.
the MENU button to select the Special
Press the D/E button to select Tilt.
Press the F /G button to adjust the tilt.
Press the TV/AV button to return to normal TV viewing.
Repeatedly press
menu.
TV/AV
MENU
Game
(option)
TURBO
PR
1.
2.
3.
4.
5.
6.
7.
the MENU button to select the Special menu.
Press the D/E button to select Game.
Press the OK button to enter the game mode.
Press the D/E button to select the game 1 or 2, then press the
OK button.
Press the F/G button to select a level, then press the OK button.
Press the D/E button to select the music on or off.
Press the OK button to start the game.
Repeatedly press
VOL
OK
VOL
PR
1. PERFECT PUZZLE
8.
Press the F/G button to move the object to the left or right.
Press the E button to make the object fall down and press the
OK button to change the order of icons inside the object.
The game scores are displayed on the screen.
2. QUICK BRAIN
8. Select a pair of cards with same picture by pressing the D/E,
F/G and OK button.
If you find all the pairs of cards with same picture in a level, the
next level begins automatically.
Note :
a.
Press the TV/AV
viewing.
b.
If you want
a new
or
MENU button to return to the normal TV
game, press the RED button to start.
19
Other functions
Special
TV
Input
Menu
ChildOlock
Off
AutoOsleep
Off
BlueOback
Off
Tilt
0
Game
Off
Degauss
()O}{O MENUOTV
AV
Degaussing (option)
to the super large Braun Tube in the set the magnetic field
of the earth may influence on the colour purity of picture by neighbour magnetic substance or installation direction of the set. The
stripes may appear on the screen or the colour may not be equal in
the corner. You can enjoy the programme in high colour quality by
Owing
operating
1.
2.
3.
4.
the
Degaussing.
the MENU button to select the Special menu.
Press the D/E button to select Degauss.
Press the F /G button to select On.
After the degauss function works, On mode switches to Off
mode.
Press the TV/AV button to return to normal TV viewing.
Repeatedly press
TV/AV
Note : If you cannot adjust the
it again after about 4 minutes.
screen
condition
by degaussing, try
MENU
TURBO
Sleep
timer
PR
VOL
VOL
PR
SLEEP
20
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time elapses.
Press the SLEEP button to select the number of minutes. The dis0 will appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180 and 240. The timer begins to count down from the number
of minutes selected.
Note :
a.
To view the remaining sleep time, press the SLEEP button once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
until the display
0 appears.
c.
When you switch the set off, the set releases the preset sleep
time.
PIP
Option
PIP is
operation (option)
:
an
optional function,
so
that
only
the set with PIP function
can
operate.
PIP
in
(Picture
Picture) displays
a
picture
within
a
picture.
On and off
Press the PIP button to switch on one of the 1/16, 1/4 and 1/2 size
sub pictures.
Press this button again to switch it off.
Input
mode selection for sub
Press the INPUT button to select the
picture
input
mode for the sub
picture.
Each time this button is pressed, each input mode for the sub
displayed as shown below at the left upper side of sub
ture is
picpic-
ture.
Main
AV3
Sub
picture
picture
TV
AV1
AV2
AV3
(or S-AV) (option)
AV1
TV
AV2
AV3
(or S-AV) (option)
AV2
TV
AV1
AV3
(or S-AV) (option)
TV
AV1
(or S-AV) (option)
Swapping
between main and sub
Press the SWAP button to
Programme
exchange
selection for sub
AV2
pictures
the main and sub
pictures.
picture (option)
The sub picture programme selection is available when the sub picture is TV mode. Press the PR +/- buttons to select a programme
for the sub picture. The selected programme number is displayed
at the left upper side of sub picture.
Sub
picture
size
SIZE
Repeatedly press the SIZE button to select the desired sub
size. The sub picture appears as below.
1/16 size of the main
Sub
picture
picture
1/4 size
picture
PR-
STILL
PR+
POSITION
SWAP
9/4PIP
INPUT
1/2 size
freeze
Press the STILL button to freeze motion of the sub
Press this button again to restore motion.
Sub
PIP
picture.
picture position change
Press the POSITION button repeatedly until desired position is
achieved. The 1/16 and 1/4 sub pictures move clockwise.
9
or
4 sub
picture
Press the 9/4 PIP button
repeatedly
to select 9 or 4 sub
pictures.
21
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
a
set
free service broadcast by most TV stations which gives
information on news, weather, television programmes, share prices and many other topics.
Teletext is
a
up-to-the-minute
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
Switch on/off
1
2
3
TV/AV
4
5
6
7
8
9
0
PR
Press the TEXT/* button to switch to teletext.
If TV and text picture are displayed half and half of the screen,
press the TEXT/* button again to display text picture fully.
The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page nimber indicates your selection, while the second shows the current page displayed.
Press the TEXT/* or TV/AV button to switch off teletext. The previous mode reappears.
OK
SIMPLE text
PR
selection
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The D / E button can be used to select the preceding or fol-
Page
1.
2.
lowing page.
TEXT/
M
Programming
a
colour button in LIST mode
If the TV is in SIMPLE text, TOP text
M
button to switch to LIST mode.
or
FASTEXT mode, press the
Four teletext page numbers of your choice can be colour coded and
easily selected by pressing the corresponding coloured button on
the remote control handset.
1.
Press
a
2.
Using
the NUMBER buttons, select the page you wish to pro-
3.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number with blinking once. From now on, you
4.
22
coloured button.
can select this page with the same coloured button.
The three other coloured buttons are programmed in this way.
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the D button can be used.
4. The red button permits to return to previous selection.
Alternatively the E button can be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
1
2
3
4
5
6
7
8
9
TOP mode.
0
FASTEXT
PR
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
PR
selection
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The D / E button can be used to select the preceding or fol-
Page
1.
2.
3.
4.
lowing page.
i
23
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
1
2
3
4
5
6
7
8
9
page.
Press this button
again
half of the page.
the bottom half of the
to return to the normal
display.
UPDATE
Displays
the TV
picture
on
the
screen
while
waiting
for the
new
will appear at the top left hand
teletext page. The display
corner of the screen. When the updated page is available then
0
PR
will change to the page number.
Press this button to view the updated teletext page.
display
HOLD
PR
Stops
the automatic page
change
which will
occur
if
a
tele-
text page consists of 2 or more sub pages. The number of
sub pages and the sub page displayed is, usually, shown
on the screen below the time. When this button is pressed
the stop symbol is displayed at the top left-hand corner of
the screen and the automatic page change is inhibited.
To continue press this button again.
MIX
SIZE
TIME
REVEAL
?
MIX
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
To switch the TV
Note
:
picture off press this button again.
When TV and text picture are displayed half and half
of the screen, MIX function is not available.
TIME
viewing a TV programme, press this button to display
the time at the top right hand corner of the screen. Press this
button again to remove the display. In the teletext mode,
When
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the RED/GREEN, D / E
NUMBER buttons.
change
Press
24
again
to exit this function.
or
Connection of external
You
can connect additional
etc. to your set.
equipment,
such
as
equipment
VCRs, camcorders
Here shown may be somewhat different from your set.
ANT IN
L L 75Ω
OUT
VIDEO
(L/MONO) -AUDIO-(R)
IN
Aerial socket
1.
2.
3.
4.
5.
AV2
1
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
VCR
ANT IN
L L 75Ω
OUT
VIDEO
(
MONO) -AUDIO-(R)
IN
AV2
1
Audio/Video in/out sockets
1.
2.
3.
(option)
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to out sockets
of the set.
Press the TV/AV button to select AV 1, AV 2 or AV 3.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
You
also record programmes received
tape via audio/video out sockets.
can
Euro scart socket
1.
2.
by
the TV
on
video
VCR
ANT IN
L L 75Ω
OUT
OUT
VIDEO
(L MONO) -AUD O-(R)
VIDEO
IN
(option)
(L/MONO) -AUDIO-(R)
IN
AV
AV2
VCR
Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
Press the PLAY button on the VCR.
If your VCR outputs a switching voltage connect to Euro scart
socket, the set will switch to AV 1 mode automatically. But if you
want to keep on watching TV mode, press the D / E or NUMBER buttons.
S-VIDEO
L/MON
AUDIO
R
Otherwise press the TV/AV button on the remote control handset to select AV 1. The VCR playback picture appears on the
VCR
screen.
You
can
also record programmes received
by
the TV
on
AV3
video
tape.
Note : Signal type RGB, i.e. the signals red, green and blue can
only be selected for the Euro scart socket. These signals are transmitted, for example, by a computer, pay TV decoder, game
machine or photo CD unit, etc.
ANT IN
L L 75Ω
OUT
VIDEO
(L/MONO) -AUDIO-(R)
IN
1
AV2
VCR
25
Connection of external
equipment
S-video / Audio in sockets
When
connecting
picture quality will
S-VIDEO
(S-AV) (option)
an S-VIDEO VCR to the S-VIDEO socket, the
be further improved.
L/MON
1.
AUDIO
R
AV3
2.
S-VIDEO VCR
3.
4.
Connect the S-video socket of the VCR to the S-VIDEO socket
of the set.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets of the set.
Select S-AV by pressing the TV/AV button repeatedly.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
Note : If both S-VIDEO and VIDEO sockets have been connected
to the S-VHS VCR simultaneously, only the S-VIDEO can be
received.
S-VIDEOL/MN
AUDIO
R
Headphone
AV3
Equalizer
Flat
Balance
AVL
§Volume
0
Off
socket
(option)
Insert the headphone plug to the headphone socket of the set.
You can listen to the sound through the headphone and the TV's
speakers. To adjust the headphone volume, press the D / E button
to select §Volume then press the F / G button in the Sound
menu. See the 'Sound adjustment' section.
[0I]20
If you press the MUTE button,
are
()O}{O OKOMENUOTV
only the
sound from the TV's
speakers
switched off.
AV
In some models, when a programme is received in dual language, you can select a language (DUAL I, DUAL II or DUAL
I+II) for the sound from the headphone regardless of that from
the TV's speakers. In the Sound menu, press the D / E button
to select§Volume then I/II button to select the desired lan-
guage; I, II or I II.
At this time if the set is in AV mode, the I/II button selects output
sound;LR,LLorRR,inturn.
26
Troubleshooting
check list
Symptoms
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
Check aerial
(broken lead?)
into
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
27
Download PDF