LG | CT-29Q47EX | LG CT-29Q47EX Owner’s Manual

Colour Television
OWNER'S MANUAL
Please read this manual
carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
information to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828VA0319A
(MC007A,
083A/D/061Z
cover
require
TX)
and quote this
service.
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel / Side panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view / Mute function
Auto Demonstration / On screen language selection
7
On
(option)
8
screen menus
Menu selection
TV stations
Auto programme tuning
Manual programme tuning
Fine Tuning
Programme edit
Calling the programme table
9
Setting up
Picture adjustment
Picture adjustment / Eye (option) / Picture format
Turbo picture selection (option)
14
Sound adjustment
Sound adjustment / Turbo sound selection
Stereo / Dual reception (option)
NICAM reception (option)
Sound output selection
16
Other functions
TV and AV modes / Auto AV switching
Child lock / Auto sleep / Blue back
Tilt (option) / Game (option)
Degaussing (option) / Sleep timer
18
(option)
PIP operation (option)
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture (option)
Sub picture size / Sub picture freeze
Sub picture position change / 9 or 4 sub picture
21
Teletext (option)
Switch on / off
SIMPLE text
TOP text (option)
FASTEXT mode
Special teletext functions
22
Connection of external equipment
Aerial socket
Audio/Video in/out sockets (option)
Euro scart socket (option)
S-video / Audio in sockets (S-AV) (option)
Headphone socket (option)
25
Troubleshooting
2
(option)
check list
27
Installation
Power
This set
ed
on
operates
the label
on
on an
AC mains
the back
In the event of thunderstorms
ial and mains
supply, the voltage is as indicatapply DC power to the set.
powercuts, please pull out the aer-
cover.
or
Never
plugs.
Warning
To
prevent fire
or
shock
hazard, do
not expose the set to rain
or
moisture.
Service
Never
remove
the back
high voltage
properly, unplug it
very
cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω
cover.
For the best
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
the
unnecessary
vibration, moisture, dust
set is
in
placed
the ventilation
or
heat. Also
position to allow a free flow
openings on the back cover.
a
ensure
that the
of air. Do not
cover
3
Location and function of controls
All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.
POWER
Remote control handset
MUTE
10
1
ARC
1
2
2
11
3
Before you use the remote control
teries. See the next page.
handset, please install the bat-
TV/AV
4
5
6
7
8
9
12
1.
SOUND
MENU
PICTURE
2.
TURBO
PR
VOL
4
3.
VOL
OK
from
standby
or
off to
NUMBER BUTTONS
switches the set on from
standby
or
directly
on
standby.
13
0
3
POWER
switches the set
MENU
selects
select
a
a menu.
PR
REW
PLAY
FF
5
P/STILL
STOP
REC
6
PSM
4.
LIST
14
TEXT/
16
TIME
REVEAL
? SLEEP
SIZE
STILL
POSITION
9/4PIP
M
9
PR-
PR+
SWAP
17 5.
i
INPUT
/
EYE/
displays
the current mode.
VCR BUTTONS (option)
control a LG video cassette recorder.
SSM (Sound Status Memory)
recalls your preferred sound setting.
7.
PSM (Picture Status
recalls your preferred
8.
EYE/* (option)
switches the eye function
Memory)
picture setting.
on or
off.
PIP)
9.
MIX
or
6.
18
(With teletext
settings.
accepts your selection
PIP
MIX
menu
OK
15
EYE/
8
adjusts
I/II
SSM
7
Δ / Ε (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
Φ / Γ
(Volume Up/Down)
adjusts the volume.
TELETEXT BUTTONS (option)
These buttons are used for teletext.
For further details, see the 'Teletext' section.
TEXT/
10. MUTE
TIME
REVEAL
? SLEEP
M
switches the sound
9
on or
off.
i
11. ARC
(Aspect Ratio Control)
changes the picture format.
Q.VIEW
18
(With teletext
/ Without
PIP)
12. TV/AV
selects TV or AV mode.
clears the menu / text from the screen.
switches the set on from standby.
13. TURBO PICTURE / SOUND BUTTON
selects Turbo
4
picture
/ sound.
number.
Location and function of controls
14. LIST
displays
the programme table.
15. I/II
selects the language during dual
selects the sound output.
16. PIP BUTTONS
language
broadcast
(option).
(option)
PIP
switches the sub picture on or off.
PR +/selects a programme for the sub picture.
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
9/4 PIP
switches on or off the 9 or 4 sub pictures.
POWER
MUTE
10
1
2
1
2
3
4
5
6
7
8
9
TV/AV
MENU
12
0
3
PR
4
VOL
VOL
OK
17. SLEEP
sets the
sleep
timer.
Q.VIEW
LIST
PR
14
18
18. SWAP
or
Q.VIEW
returns to the
previously
viewed programme.
11
COLOURED BUTTONS
These buttons are used for teletext
programme edit.
EYE/
(only
TELETEXT
models)
or
ARC
I/II
SSM
SLEEP
15
8
PSM
17
7
6
Battery
installation
PICTURE SOUND
TURBO
The remote control handset is powered by two AAA type batteries. 13
To load the batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by
the polarity symbols ( + and
) marked inside the compartment.
-
(Without teletext
/
PIP)
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
5
Location and function of controls
Front
panel
CT-29Q26/27 series
CT-25Q26/27 series
11
10
S-VIDEOL/MN
POWER
STAND BY
POWER
MENU
AUDIO
1
R
AV3
OK
VOL
MENU
PR
46823
12
1
CT-25/29H46/47 series
OK
VOL
PR
468
23
12
CT-29K36/37 series
S-VIDEO
10
VIDEO
VIDEO L/MONO AUDIO R
TV/AV
L
AV3
POWER
POWER
(L/MONO)
MENU OK
VOL
PR
VOL
PR
AV3
R
AUDIO
11
1
23
468
12
12357
9
10 11
12
CT-29M30/32 series
CT-25/29H36/37 series
11
AV3
MENU
OK
VOL
PR
AV3
TV/AV
VIDEO (L/MONO) AUDIO (R)
POWER
POWER
STAND-BY
VIDEO
VOL
PR
L
MONO
10
AUDIO
R
1
23468
1012
123579
Side Panel
1.
MAIN POWER
switches the set
8.
on or
off.
Δ / Ε (Programme Up/Down)
selects a programme or a menu item.
switches the set
2.
on from standby.
(Volume Down/Up)
adjusts the volume.
adjusts menu settings.
POWER/STANDBY INDICATOR
illuminates
mode.
brightly
Φ
when the set is in
dims when the set is switched
standby
Γ
on.
9.
3.
/
REMOTE CONTROL SENSOR
+/- (Δ/Ε)
adjusts the
function
switches the set
4.
MENU
selects
on
or
selects
from
10.AUDIO/VIDEO IN SOCKETS
a menu.
a
programme.
standby.
(AV3)
Connect the audio/video out sockets of external equipment to these sockets.
5. TV/AV
selects TV
clears the
or
AV mode.
menu
switches the set
S-VIDEO/AUDIO IN SOCKETS
from the
on
from
(S-AV) (option)
Connect the video out socket of
screen.
standby.
an
S-VIDEO
VCR to the S-VIDEO socket.
Connect the audio out sockets of the S-VIDEO
6.
OK
VCR to the audio sockets
accepts your selection
or
displays
mode.
(option)
headphone plug to this
socket.
(Function)
selects
volume, EYE (option), picture items
brief auto programme while the
play.
6
in AV3.
11. HEADPHONE SOCKET
Connect the
7.
as
the current
menus
or
not dis-
12.EYE
(option)
adjusts picture according
conditions.
to the
surrounding
Basic
operation
On and off
1.
2.
3.
4.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, Δ / Ε, TV/AV or
NUMBER buttons on the remote control handset to switch it on fully.
Press the POWER button on the remote control handset.
The set reverts to standby mode.
Press the main power button again to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
POWER
Programme
selection
You can select
buttons.
a
programme number with the
Δ
/
Ε
or
NUMBER
MUTE
1
2
3
4
5
6
7
8
TV/AV
SOUND
Volume
Press the
adjustment
Φ
Γ
/
button to
9
MENU
adjust
0
the volume.
TURBO
PR
Quick view
VOL
Press the SWAP
were
or
Q.VIEW button to view the last programme you
OK
VOL
PR
watching.
Mute function
Press the MUTE button. The sound is switched off and the
W appears.
You can cancel it
SOUND button.
by pressing
the
MUTE,
Φ
/
display
Γ, SSM, I/II, TURBO
SSM
I/II
Auto Demonstration
To review all the
menus
button of the front
or
programmed in the set,
panel control for about
press the OK
5 seconds. To
auto demonstration, press any button of the front
control and POWER button of the remote control.
stop
On
screen
language
selection
The menu can be displayed
First select your language.
1.
2.
3.
4.
5.
6.
Press the
Press the
Press the
Press the
Press the
All the on
Press the
on
the
SWAP
panel
(option)
screen
in desired
language.
MENU button to select the Station menu.
Δ / Ε button to select Language.
OK button.
Δ / Ε button to select your desired language.
OK button.
screen displays will appear in the selected language.
TV/AV button to return to normal TV viewing.
7
On
screen menus
The
an
dialogue
operator
also
between you and your set takes place on screen with
The buttons required for the operating steps are
menu.
displayed.
Menu selection
press the MENU button to display each menu.
Press the Δ / Ε button to select a menu item.
The selected menu item changes from white to red.
3.
Press the Φ / Γ button to change the setting of a menu item or
OK button to display the sub menu.
Note :
a.
In the AV mode, the Station menu is not displayed.
b. In the teletext mode, menus are not displayed.
c.
In some models, the Normal/Turbo search will not display,
only the Start will display in the Auto programme menu.
d.
In some models, Tilt, Game or Degauss will not display.
e.
In some models, the Language will not display.
1.
2.
MENU
Repeatedly
BG
AutoOprogramme
ManualOprogramme
System
StorageOfrom
ProgrammeOedit
NormalOsearch
Language
TurboOsearch
1
PR
VOL
OK
VOL
()OOKOMENUOTV
AV
Station
PR
()O}{OMENUOTV
AV
menu
Contrast
100
BG
System
Brightness
55
ChannelOOOOV
Colour
60
Fine
Sharpness
50
Search
Tint
0
UHF
20
{{{
NameOOOOOOOOOOOC
20
1
Storage
()O}{OOKOMENUOTV
Picture
AV
()O}{OOKOMENUOTV
AV
menu
O0OOCO03 OOO5OOSO69
Equalizer
Balance
AVL
§Volume
0
O1OOCO03OOO6OOSO17
Off
O2OOCO12OOO7OOSO22
30
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
DeleteOOOCopy
MoveOOOOOSkip
()OOKOMENUOTV
AV
Sound
()O}{OOKOMENUOTV
TV
Input
ChildOlock
Off
AutoOsleep
Off
BlueOback
Off
Tilt
AV
menu
0
Flat
Music
Movie
Speech
User
Game
Off
Degauss
()O}{OMENUOTV
AV
Special
TV programme
8
0.1O0.5O1.5O5.0O10OkHz
()OMENUOTV
menu
AV
Setting up
TV stations
Up to 100 TV stations can be stored in this set by programme numbers
(0 to 99). Once you have preset the stations, you will be able to use
the Δ / Ε or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Auto programme
Station
Menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Language
tuning
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this
()OOKOMENUOTV
AV
set.
1.
2.
3.
press the MENU button to select the Station menu.
Press the Δ / Ε button to select Auto programme.
Press the OK button to display the Auto programme menu.
Repeatedly
BG
System
StorageOfrom
1
NormalOsearch
TurboOsearch
1
2
3
4
5
6
7
8
TV/AV
()O}{O MENUOTV
4.
5.
6.
7.
AV
Press the Δ / Ε button to select System. Select a TV system
with the Φ / Γ button;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines)
Press the Δ / Ε button to select Storage from.
Select the beginning programme number with the Φ / Γ button
or NUMBER buttons. Any number under 10 is entered with a
numeric '0' in front of it, i.e. '05' for 5.
Press the Δ / Ε button to select Normal or Turbo search.
Option:
In
some
models, Only
can
9
MENU
0
PR
VOL
OK
VOL
PR
select Start.
Note
Turbo search is further faster than Normal search and in
some models, these searches will automatically store all receivable stations.
b. If the programmed station has poor quality sound, select the
system again in the Manual programme menu.
8.
Press the OK button to begin auto programming.
:
a.
BG
System
StorageOfrom
NormalOsearch
1
CO15
TurboOsearch
2
MENU
(Normal search)
1
NormalOsearch
TurboOsearch
2%
BG
System
StorageOfrom
CO38
2
2%
MENU
(Turbo search)
All receivable stations are stored.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
9.
Press the TV/AV button to return to normal TV
viewing.
9
TV stations
Setting up
Station
Menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Language
Manual programme
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name
()OOKOMENUOTV
AV
tuning
with five characters to each programme number.
1.
Repeatedly
2.
Press the
3.
Δ
press the MENU button to select the Station menu.
/ Ε button to select Manual programme.
Press the OK button to
the Manual programme
display
menu.
BG
System
ChannelOOOOV
UHF
Fine
20
{{{
Search
NameOOOOOOOOOOOC
1
2
3
4
5
6
7
8
9
4.
MENU
Press the
with the
PR
OK
1
()O}{O OKOMENUOTV
0
VOL
20
Storage
VOL
5.
PR
6.
Φ
Δ
/
/ Ε button to select
Γ
AV
System.
Select
a
TV
system
button;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines)
Press the Δ / Ε button to select Channel. Press the Φ / Γ
button to select V/UHF or Cable as required.
If possible, select the channel number (1 to 69) directly with the
number buttons. Any number under 10 is entered with a numeric '0' in front of it, i.e. '05' for 5.
Press the Δ / Ε button to select Search. Press the Φ / Γ button to commence searching. If a station is found the search will
stop.
7.
If this station is the one required, press the Δ / Ε button to
select Storage. Select the desired programme number (0 to
99)
with the
Φ
/
Γ
button
under 10 is entered with
5.
8.
a
or
NUMBER buttons.
numeric '0' in front of
Press the OK button to store it. The
display Stored will
BG
System
ChannelOOOOV
UHF
Fine
20
{{{
Search
NameOOOOOOOOOOOC
Storage
20
1
Stored
9.
10
To store another
Any
station, repeat steps
4 to 8.
number
it, i.e. '05' for
appear.
TV stations
Setting up
Assigning a station name
1.
Repeat the 'Manual programme tuning' steps
2.
3.
Δ / Ε button to select Name.
Press the Γ button. You can use a blank, +,
and the alphabet A to Z.
Station
Menu
AutoOprogramme
ManualOprogramme
1 to 3.
ProgrammeOedit
Press the
Language
-,
the numeric 0 to 9
4.
Φ button
you can select in the opposite direction.
Select the next position by pressing the OK button and then take
your choice of the second character, and so on.
5.
Repeat
With the
the 'Manual programme
Fine
2.
3.
viewing.
tuning
Normally
1.
AV
7 to 8.
tuning' steps
Press the TV/AV button to return to normal TV
()OOKOMENUOTV
fine
tuning
is
only
necessary if
reception
is poor.
1
2
3
4
5
6
7
8
TV/AV
Repeat the 'Manual programme tuning' steps 1 to 3.
Press the Δ / Ε button to select Fine.
Press the Φ / Γ button to fine tune for the best picture and
9
MENU
0
sound.
TURBO
PR
BG
System
ChannelOOOOV
UHF
Fine
20
{{{
VOL
OK
VOL
Search
NameOOOOOOOOOOOC
1
Storage
()O}{O OKOMENUOTV
4.
5.
20
PR
AV
the 'Manual programme tuning' steps 7 to 8.
Press the TV/AV button to return to normal TV viewing.
Repeat
The
finely tuned programme will
during programme selection.
be indicated
by yellow
number
11
Setting up
Station
Menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Language
()OOKOMENUOTV
AV
Programme
TV stations
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
2.
3.
press the MENU button to select the Station menu.
Press the Δ / Ε button to select Programme edit.
Press the OK button to display the Programme edit menu.
Repeatedly
O0OOCO03 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
DeleteOOOCopy
MoveOOOOOSkip
1
2
()O}{OOKOMENUOTV
3
AV
TV/AV
4
5
6
7
8
9
Deleting
1.
2.
MENU
0
TURBO
a programme
Select a programme to be deleted with the Δ / Ε or Φ / Γ button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
PR
Copying
VOL
OK
VOL
1.
2.
PR
a programme
Select a programme to be copied with the Δ / Ε
Press the GREEN button.
All the following programmes are shifted down
Moving
1.
2.
3.
or Φ
one
/
Γ
button.
position.
a
programme
Select a programme to be moved with the Δ / Ε or Φ / Γ button.
Press the YELLOW button.
Move the programme to the desired programme number with
theΔ/ΕorΦ/Γbutton.
4.
Press the YELLOW button
again
to release this function.
O0OOCO03 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
Move0off
()O}{OMENUOTV
AV
a programme number
Select a programme number to be skipped with the Δ / Ε or Φ / Γ
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped pro-
Skipping
1.
2.
3.
gramme.
When a programme number is skipped it means that you will be
unable to select it using the Δ / Ε button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Press the TV/AV button to return to normal TV
12
viewing.
Setting up
Calling
TV stations
the programme table
You can check the programmes stored in the memory
the programme table.
Displaying programme table
Press the LIST button to display
the
by displaying
Programme table
menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
O0OOCO03 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
TV/AV
()O}{O OKOMENUOTV
Note
AV
:
a.
You may find some blue programmes. They have been set up to
be skipped by auto programming or in the programme edit mode.
b.
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
TURBO
PR
VOL
Selecting programme in the programme table
Select a programme with the Δ / Ε or Φ / Γ button.
OK
VOL
a
PR
Then press the OK button.
The set switches to the chosen programme number.
Paging through
There
are
a
programme table
LIST
10 programme table pages in which contain 100 pro-
grammes.
Pressing the
Δ
/ Ε
or Φ
/
Γ
button
repeatedly
Press the TV/AV button to return to normal TV
turns the pages.
viewing.
13
Picture
Picture
Menu
Contrast
100
Brightness
55
Colour
60
Sharpness
50
Tint
0
()O}{O OKOMENUOTV
AV
Picture
You
can
ness
1.
2.
3.
adjustment
adjustment
adjust picture contrast, brightness, colour intensity, sharp(NTSC input only) to the levels you prefer.
and tint
press the MENU button to select the Picture menu.
/ Ε button to select the desired picture item.
Φ / Γ button to make
appropriate adjustments.
Repeatedly
Press the
Press the
Δ
Contrast
80
4.
Press the OK button to store it for the picture User.
To recall your preferred setting, press the PSM button until the
desired picture (Dynamic, Standard, Mild, Game or User)
appears. The picture Dynamic, Standard, Mild and Game are
programmed for good picture reproduction at the factory and cannot be changed.
SOUND
MENU
PICTURE
Eye (option)
TURBO
PR
VOL
OK
PR
VOL
Eye is an optional function. Only a set with eye option can perform
this function.
In some models, the set will automatically adjust the picture according to the surrounding conditions. This will enable you to enjoy the
most suitable picture according to the surroundings.
Press the EYE/* button to switch the eye function
on or
off.
PSM
EYE/
Off
When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.
At this time the display
in green does not appear continuously
but the display
in yellow appears each time the picture condition changes.
Note
eye
14
:
If you press the PSM
or
TURBO PICTURE button with the
function, the eye function is automatically switched off.
Picture
adjustment
Picture format
You
can
watch TV in
Contrast
various
(Wide), Zoom 1 or Zoom 2.
Repeatedly press the ARC button
picture formats; Standard,
16:9
100
Brightness
55
Colour
60
Sharpness
50
Tint
to select your desired
picture
Picture
Menu
0
for-
mat.
()O}{O OKOMENUOTV
Standard
This picture format is 4 to 3 of
general
AV
TV.
16:9
You can
enjoy the cinema (the picture format of 16:9) or general TV
programme through the 16:9 mode.
The screen 16:9 is viewed just like that but the screen 4:3 is magnified to the left and right so that the screen 16:9 is full.
ARC
Zoom 1
You can enjoy the cinema in a vast screen through the Zoom mode.
The screen 4:3 is magnified to the upper/lower and left/right sides
so that the screen 16:9 is full. The bottom and top of the picture
may be lost.
PICTURE
Zoom 2
You can enjoy more magnified screen in this mode. The screen
Zoom 2 is viewed just like that but the screen 16:9 is magnified to
the upper and lower so that the screen Zoom 2 is full.
TURBO
Note :
When you switch the set to standby or off, the 16:9 or Zoom picture format is reset to the Standard (4:3).
b. In the 1/2 size sub picture and vertical four sub pictures of PIP
mode the picture format is not available.
a.
Turbo
picture
selection
(option)
PSM
When this function is on, picture will be more brilliant and distinct
picture than normal picture. You can enjoy the Turbo picture so
much better than normal picture.
Repeatedly press the TURBO PICTURE button to switch on or off.
(Turbo Picture off)
Note
:
If you press the PSM
EYE/
(Turbo Picture on)
or
EYE/* button with the Turbo
picture
function, the Turbo picture function is automatically switched off.
15
Sound
Sound
Menu
Sound
Equalizer
Balance
0
AVL
Off
30
§Volume
()OOKOMENUOTV
AV
You
adjustment
adjustment
select your preferred sound setting; Flat, Music, Movie or
Speech and you can also adjust the sound frequency of equalizer,
balance, headphone volume/sound (option). If you switch AVL to on,
the set automatically keeps on an equal volume level even if you
change programmes. The Turbo sound creates an all around sound
as in a concert hall.
1.
2.
3.
can
press the MENU button to select the Sound menu.
/ Ε button to select the desired sound item; Equalizer,
Balance, AVL or §Volume (option).
Press the Φ / Γ button to make desired adjustment.
Press the OK button in Equalizer to set the Equalizer User.
Repeatedly
Press the
Δ
Flat
Music
Movie
TV/AV
Speech
User
SOUND
0.1O0.5O1.5O5.0O10OkHz
MENU
()O}{O OKOMENUOTV
AV
TURBO
PR
VOL
OK
PR
Select User by pressing the Δ / Ε button.
b. Select a sound band by pressing the Φ / Γ button.
c. Make appropriate sound level with the Δ / Ε button.
d. Press the OK button to store it for the sound User.
The display Stored appears.
a.
VOL
Press the TV/AV button to return to normal TV
SSM
viewing.
To recall your preferred setting, press the SSM button until the
desired sound (Flat, Music, Movie, Speech or User) appears.
The sound Flat, Music, Movie and Speech are programmed for
good sound reproduction at the factory and cannot be changed.
If you press the SSM button after making appropriate adjustdisplay User automatically appears even
though you have already set a factory preset setting; Flat, Music,
Movie or Speech.
Note
:
ment in Sound menu, the
Turbo sound selection
(option)
When this function is on, sound will be more emphasized and
amplified sound than normal sound. You can enjoy the Turbo
Sound so much better than normal Sound.
Repeatedly press the TURBO SOUND button to switch on or off.
(Turbo Sound off)
16
(Turbo Sound on)
Sound
Stereo/Dual
adjustment
reception (option)
Stereo/dual is an optional function.
When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button twice again.
for dual language broadcast
If a programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II but-
Language selection
ton
repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
If your set is
equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
I/II
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
1.
2.
3.
screen.
Sound output selection
In AV
mode, you
can
select
output sound for the left and right loud-
speakers.
press the I/II button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
Repeatedly
L+R
:
L+L
:
R+R
:
speaker.
Audio signal
speakers.
Audio signal
speakers.
from audio L
input
is sent to left and
right
loud-
from audio R
input
is sent to left and
right
loud-
17
Other functions
Special
TV
Input
Menu
ChildOlock
Off
AutoOsleep
Off
BlueOback
Off
Tilt
0
TV and AV modes
Inputs can be set for TV or AV mode. AV mode is used when a video
cassette recorder (VCR), or other equipment is connected to the set.
Game
Off
Degauss
()O}{O MENUOTV
AV
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
2.
3.
press the MENU button to select the Special menu.
Press the Δ / Ε button to select Input.
PresstheΦ /Γbuttonto selectTV,AV1,AV2,AV3(orS-AV).
The AV modes are :
AV1 : VCR connected to the Euro scart socket or phone jack of
the set
AV2 : VCR connected to the phone jack of the set
AV3 : VCR connected to the AV3 sockets of the set
S-AV : S-VIDEO VCR connected to the S-VIDEO sockets of the
Repeatedly
1
2
3
4
5
6
To return to TV
7
8
9
Alternatively you
TV/AV button.
set
TV/AV
MENU
(option)
mode, press the
can
Δ
/
select the TV
Ε or
or
NUMBER buttons.
AV mode
by pressing
the
0
TURBO
PR
VOL
Auto AV
VOL
PR
switching (option)
If your VCR outputs switching voltage when it is switched to playback with the VCR connected to the Euro scart socket. The set is
automatically switched to AV 1 mode when an AV signal is input.
But if you want to keep on watching TV mode, press the Δ / Ε or
NUMBER buttons.
Press the TV/AV button to return to AV modes.
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
2.
3.
4.
press the MENU button to select the Special menu.
Press the Δ / Ε button to select Child lock.
Press the Φ / Γ button on the remote control handset to select On.
Press the TV/AV button to return to normal TV viewing.
Repeatedly
With the lock on, the display Child lock on appears on the screen
if any button on the front panel is pressed while viewing the TV.
Note : The display Child lock on will not appear on the screen if
any button on the front panel is pressed while displaying the menus.
Auto
sleep
If you select Auto sleep On the set will automatically switch itself
standby mode approximately ten minutes after a TV station stops
to
broadcasting.
1.
2.
3.
4.
18
press the MENU button to select the Special
Press the Δ / Ε button to select Auto sleep.
Press the Φ / Γ button to select On.
Press the TV/AV button to return to normal TV viewing.
Repeatedly
menu.
Other functions
Blue back
If you select Blue back On, the blue background appears
screen when there is no or poor signal.
1.
2.
3.
4.
Tilt
press the MENU button to select the Special
Press the Δ/Ε button to select Blue back.
Press the Φ / Γ button to select On or Off.
Press the TV/AV button to return to normal TV viewing.
Repeatedly
on
the
Off
AutoOsleep
Off
BlueOback
Off
Tilt
Special
Menu
0
Game
Off
Degauss
menu.
()O}{O MENUOTV
AV
(option)
The TV
another
1.
2.
3.
4.
TV
Input
ChildOlock
picture may tilt to the left
position. This function can
right if the TV set moves to
be used to compensate the tilt.
or
press the MENU button to select the Special
Press the Δ/Ε button to select Tilt.
Press the Φ / Γ button to adjust the tilt.
Press the TV/AV button to return to normal TV viewing.
Repeatedly
menu.
TV/AV
MENU
Game
(option)
TURBO
PR
1.
2.
3.
4.
5.
6.
7.
Repeatedly press the MENU button to select the Special menu.
Press the Δ/Ε button to select Game.
Press the OK button to enter the game mode.
Press the Δ /Ε button to select the game 1 or 2, then press the
OK button.
Press the Φ/Γ button to select a level, then press the OK button.
Press the Δ/Ε button to select the music on or off.
Press the OK button to start the game.
VOL
OK
VOL
PR
1. PERFECT PUZZLE
8.
Press the Φ/Γ button to move the object to the left or right.
Press the Ε button to make the object fall down and press the
OK button to change the order of icons inside the object.
The game scores are displayed on the screen.
2. QUICK BRAIN
8. Select a pair of cards with same picture by pressing the Δ/Ε,
Φ/Γ and OK button.
If you find all the pairs of cards with same picture in a level, the
next level begins automatically.
Note :
Press the TV/AV
a.
b.
viewing.
If you want
a new
or
MENU button to return to the normal TV
game, press the RED button to start.
19
Other functions
Special
TV
Input
Menu
ChildOlock
Off
AutoOsleep
Off
BlueOback
Off
Tilt
0
Game
Off
Degauss
()O}{O MENUOTV
AV
Degaussing (option)
to the super large Braun Tube in the set the magnetic field
of the earth may influence on the colour purity of picture by neighbour magnetic substance or installation direction of the set. The
stripes may appear on the screen or the colour may not be equal in
Owing
the
corner.
operating
1.
2.
3.
You
the
can enjoy the
Degaussing.
programme in
high
colour
press the MENU button to select the
Press the Δ/Ε button to select Degauss.
Press the Φ /Γ button to select On.
Repeatedly
quality by
Special
menu.
degauss function works, On mode switches to Off
mode.
Press the TV/AV button to return to normal TV viewing.
After the
4.
TV/AV
Note : If you cannot adjust the
it again after about 4 minutes.
screen
condition
by degaussing, try
MENU
TURBO
Sleep
timer
PR
VOL
VOL
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the
preset time elapses.
Press the SLEEP button to select the number of minutes. The dis-
PR
0 will appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180 and 240. The timer begins to count down from the number
of minutes selected.
Note :
To view the remaining sleep time, press the SLEEP button once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
until the display
0 appears.
c.
When you switch the set off, the set releases the preset sleep
time.
a.
SLEEP
20
PIP
Option
PIP is
operation (option)
:
an
optional function,
so
that
only the
set with PIP function
can
operate.
PIP
in
(Picture
Picture) displays
a
picture
within
a
picture.
On and off
Press the PIP button to switch
sub pictures.
Press this button
Input
again
on one
of the
1/16, 1/4 and 1/2 size
to switch it off.
mode selection for sub
Press the INPUT button to select the
picture
input
mode for the sub
picture.
Each time this button is pressed, each input mode for the sub
ture is displayed as shown below at the left upper side of sub
picpic-
ture.
Main
AV3
Sub
picture
picture
TV
AV1
AV2
AV3
(or S-AV) (option)
AV1
TV
AV2
AV3
(or S-AV) (option)
AV2
TV
AV1
AV3
(or S-AV) (option)
TV
AV1
(or S-AV) (option)
Swapping
between main and sub
Press the SWAP button to
Programme
exchange
AV2
pictures
the main and sub
selection for sub
pictures.
picture (option)
The sub picture programme selection is available when the sub picture is TV mode. Press the PR +/- buttons to select a programme
for the sub picture. The selected programme number is displayed
at the left upper side of sub
Sub
picture
size
SIZE
Repeatedly press the SIZE button to select the desired sub
size. The sub picture appears as below.
1/16 size of the main
Sub
picture
1/4 size
picture
again
PR+
POSITION
SWAP
9/4PIP
INPUT
picture.
to restore motion.
picture position change
Press the POSITION button
repeatedly until
pictures move
achieved. The 1/16 and 1/4 sub
or
STILL
freeze
Press this button
9
picture
PR-
1/2 size
Press the STILL button to freeze motion of the sub
Sub
PIP
picture.
4 sub
desired
position
is
clockwise.
picture
Press the 9/4 PIP button
repeatedly
to select 9
or
4 sub
pictures.
21
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
Teletext is
a
set
free service broadcast by most TV stations which gives
information on news, weather, television programmes, share prices and many other topics.
a
up-to-the-minute
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
Switch on/off
1
2
3
TV/AV
4
5
6
7
8
9
0
PR
Press the TEXT/* button to switch to teletext.
If TV and text picture are displayed half and half of the screen,
press the TEXT/* button again to display text picture fully.
The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page nimber indicates your selection, while the second shows the current page displayed.
Press the TEXT/* or TV/AV button to switch off teletext. The previous mode reappears.
OK
SIMPLE text
PR
Page selection
1.
2.
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The Δ / Ε button can be used to select the preceding or fol-
lowing
page.
TEXT/
M
Programming
a
colour button in LIST mode
If the TV is in SIMPLE text, TOP text
M
button to switch to LIST mode.
or
FASTEXT
mode, press the
Four teletext page numbers of your choice can be colour coded and
selected by pressing the corresponding coloured button on
easily
the remote control handset.
1.
Press
a
2.
Using
the NUMBER
3.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number with blinking once. From now on, you
22
buttons, select the page you wish
to pro-
select this page with the same coloured button.
The three other coloured buttons are programmed in this way.
can
4.
coloured button.
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the Δ button can be used.
4. The red button permits to return to previous selection.
Alternatively the Ε button can be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
1
2
3
4
5
6
7
8
9
TOP mode.
0
FASTEXT
PR
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
PR
Page selection
1.
2.
3.
4.
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The Δ / Ε button can be used to select the preceding or fol-
lowing
page.
i
23
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
1
2
3
4
5
6
7
8
9
page.
Press this button
again
half of the page.
the bottom half of the
to return to the normal
display.
UPDATE
Displays
the TV
picture
the
on
screen
teletext page. The display
corner of the screen. When the
0
PR
while
waiting
for the
new
will appear at the top left hand
updated page is available then
will change to the page number.
Press this button to view the updated teletext page.
display
HOLD
PR
the automatic page
Stops
text page consists of 2
change
which will
occur
if
tele-
a
sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
or more
stop symbol is displayed
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
screen
MIX
SIZE
TIME
REVEAL
?
MIX
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
To switch the TV
Note
:
picture
off press this button
When TV and text
picture
are
again.
displayed half and
half
of the screen, MIX function is not available.
TIME
When
viewing
the time at the
button
again
a
TV programme, press this button to display
corner of the screen. Press this
top right hand
to
remove
the
display.
In the teletext
mode,
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the
NUMBER buttons.
change
Press
24
again
to exit this function.
RED/GREEN,
Δ
/
Ε
or
Connection of external
You
connect additional
can
equipment,
such
as
equipment
VCRs, camcorders
etc. to your set.
Here shown may be somewhat different from your set.
ANT IN
L L 75Ω
OUT
VIDEO
(L/MONO)-AUDIO-(R)
IN
Aerial socket
1.
2.
3.
4.
5.
AV2
1
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
VCR
ANT IN
L L 75Ω
OUT
VIDEO
( /MONO) -AUD O-(R)
IN
AV2
1
Audio/Video in/out sockets
1.
2.
3.
(option)
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to out sockets
of the set.
Press the TV/AV button to select AV 1, AV 2 or AV 3.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
You
can
also record programmes received
out sockets.
tape via audio/video
Euro scart socket
1.
2.
by
the TV
on
video
VCR
ANT IN
L L 75Ω
OUT
OUT
VIDEO
( MONO) -A
VIDEO
O-(R)
IN
(option)
(L/MONO) -AUDIO-(R)
IN
AV
AV2
VCR
Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
Press the PLAY button on the VCR.
If your VCR outputs a switching voltage connect to Euro scart
socket, the set will switch to AV 1 mode automatically. But if you
want to keep on watching TV mode, press the Δ / Ε or NUMBER buttons.
S-VIDEO
L/MON
AUDIO
R
Otherwise press the TV/AV button on the remote control handset to select AV 1. The VCR playback picture appears on the
VCR
screen.
You
can
also record programmes received
by
the TV
on
AV3
video
tape.
Note : Signal type RGB, i.e. the signals red, green and blue can
only be selected for the Euro scart socket. These signals are transmitted, for example, by a computer, pay TV decoder, game
machine or photo CD unit, etc.
ANT IN
L L 75Ω
OUT
VIDEO(L/MONO) -AUDIO-(R)
IN
1
AV2
VCR
25
Connection of external
equipment
S-video / Audio in sockets
When
connecting
picture quality will
S-VIDEO
(S-AV) (option)
S-VIDEO VCR to the S-VIDEO
an
be further
socket, the
improved.
L/MON
1.
AUDIO
R
Connect the S-video socket of the VCR to the S-VIDEO socket
AV3
of the set.
2.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets of the set.
3.
Select S-AV
4.
Press the PLAY button on the VCR.
The VCR playback picture appears on the
S-VIDEO VCR
by pressing
the TV/AV button
repeatedly.
screen.
Note : If both S-VIDEO and VIDEO sockets have been connected
to the S-VHS VCR simultaneously, only the S-VIDEO can be
received.
S-VIDEOL/MN
AUDIO
Headphone
R
AV3
Insert the
You
Equalizer
Flat
Balance
AVL
§Volume
0
can
socket
headphone socket of the set.
through the headphone and the TV's
headphone volume, press the Δ / Ε button
headphone plug
to the
listen to the sound
speakers.
To
to select
§Volume then press the
menu.
adjust
the
See the 'Sound
Off
adjustment'
Φ
/
Γ
button in the Sound
section.
[0I]20
If you press the MUTE
are
()O}{O OKOMENUOTV
(option)
button, only the sound from the TV's speakers
switched off.
AV
In some models, when a programme is received in dual language, you can select a language (DUAL I, DUAL II or DUAL
I+II) for the sound from the headphone regardless of that from
the TV's speakers. In the Sound menu, press the Δ / Ε button
to select§Volume then I/II button to select the desired language; I, II or I II.
At this time if the set is in AV mode, the I/II button selects output
sound;LR,LLorRR,inturn.
26
Troubleshooting
check list
Symptoms
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
these
adjust
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
27
Download PDF

advertising