LG CT-29Q12IP Owner’s Manual

Colour Television
OWNER'S MANUAL
Please read this manual
carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
information to your dealer when you
Model number
:
Serial number
:
and quote this
require service.
cover
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view / Mute function
Auto demonstration / On screen language selection
7
On
8
screen menus
Menu selection
up TV stations
Auto programme tuning
Manual programme tuning
Fine Tuning
Programme edit
Calling the programme table
9
Setting
Picture adjustment
Picture adjustment / Eye (option) / Picture format
Turbo picture selection (option)
14
Sound adjustment
Sound adjustment / Turbo sound selection
Stereo/Dual reception / NICAM reception
Sound output selection
16
Other functions
TV and AV modes / Auto AV switching
Child lock / Auto sleep / AVL (Auto volume
Blue back / Tilt
Sleep timer
PIP
(option)
18
leveler)
(option)
Teletext (option)
Switch on / off
SIMPLE text
TOP text (option)
FASTEXT mode
Special teletext functions
21
Connection of external equipment
Aerial socket
Euro scart sockets
Audio/Video in sockets
S-Video/Audio in socket (S-AV) (option)
Headphone socket (option)
PC in socket (option)
24
Troubleshooting
2
20
operation (option)
On and off / Programme selection for sub picture
Input mode selection for sub picture
Swapping between main and sub pictures
Sub picture size / Sub picture freeze
Sub picture position change
check list
Back
cover
Installation
Power
This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs.
Warning
To prevent fire
moisture.
or
shock hazard, do not expose the set to rain
or
Service
Never
remove
the back cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
high voltage
properly, unplug it
very
Aerial
Connect the aerial cable to the socket marked +75 Ω on the back
cover. For the best reception an outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
set is placed in a position to allow a free flow of air. Do not cover
the ventilation openings on the back cover.
3
Location and function of controls
All the functions
can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.
Remote control handset
Before you use the remote control handset,
teries. See the next page.
1
1.
POWER
switches the set
TV/AV
54
PICTURE
6
ARC
I/II
PIP
2.
from
TEXT
MENU
standby
or
off to
standby.
MUTE
switches the sound
TURBO
3.
ARC
4.
TV/AV
on or
off.
(Aspect Ratio Control)
changes the picture format.
POSITION
STILL
9/4PIP
SIZE
selects TV
i
PR
clears the
or
AV mode.
menu
switches the set
5.
on
from
screen.
standby.
EYE/*(option)
switches the eye function
PR
PR
from the
VOL
OK
VOL
PR
on
LIST
EYE
SOUND
7
install the bat-
POWER
MUTE
23
please
on or
off.
INPUT
SWAP
6.
MIX
123
8
TURBO PICTURE (option)
selects Turbo picture.
TURBO SOUND (option)
selects Turbo sound.
TIME
456
REVEAL
7.
789
PSM
SLEEP
SSM
9
0
Δ / Ε (Programme Up/Down)
selects a programme or a menu item.
switches the set
on from standby.
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
M
Φ
10
PLAY
REC
REW
STOP
P/STILL
FF
/
Γ
OK
accepts your selection
8.
or
displays
the current mode.
NUMBER BUTTONS
switches the set
on
from
standby
or
directly
number.
PICTURE
6
T
U
R
B
O
PIP
EYE
SOUND
MENU
TEXT
9.
PSM (Picture Status
recalls your preferred
10. SSM
(Sound Status Memory)
preferred sound setting.
recalls your
STILL
4
POSITION
Memory)
picture setting.
selects
a
programme
Location and function of controls
11. DUAL
(I/II)
selects the language during dual language broadcast.
selects mono sound during stereo broadcast.
12. LIST
displays
the programme table.
13. PIP BUTTONS (option)
PIP
switches the sub picture on or off.
PR +/- (option)
selects a programme for the sub picture.
SWAP
alternates main and sub picture.
INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
9/4PIP
switches on or off the 9 or 4 sub pictures.
POWER
MUTE
11
TV/AV
ARC
I/II
LIST
12
PICTURE
PIP
EYE
13
SOUND
TEXT
MENU
TURBO
14
15
POSITION
STILL
9/4PIP
SIZE
i
PR
14. MENU
selects
a menu.
VOL
OK
VOL
15. TELETEXT BUTTONS (option)
These buttons are used for teletext.
For further details, see the 'Teletext' section.
PR
PR
PR
16. SWAP
INPUT
SWAP
16
returns to the
previously
viewed programme.
MIX
17. SLEEP
sets the
123
sleep
timer.
TIME
456
18. VCR BUTTONS
controls a LG video cassette recorder.
REVEAL
789
PSM
Note : In teletext mode, the PR +/-, SWAP and INPUT buttons
used for teletext function.
PLAY
REC
Battery
SSM
SLEEP
0
are
REW
M
17
STOP
P/STILL
FF
18
installation
The remote control handset is powered by two AAA type batteries.
Gently pull down the cover of the remote control handset until the
battery compartment is exposed. Install two batteries as indicated
by the polarity symbols ( + and ) marked inside the compartment.
-
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
5
Location and function of controls
Front
You
panel
the front panel buttons just by touching soft instead of
them (except the main power button).
can use
pressing
8
7
S-VIDEOL/MN
Side
OK
VOL VOL
PR
PR
1234
AUDIO
R
MENU
POWER
5
6
AV3
1.
MAIN POWER (POWER
switches the set on or off.
2.
POWER/STANDBY INDICATOR
illuminates brightly when the set is in
dims when the set is switched on.
panel
3.
4.
MENU
selects
)
standby
mode.
a menu.
OK
accepts your selection
or
displays
the current mode.
Φ / Γ
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
Δ / Ε (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
5.
EYE (option)
adjusts picture according
to the
surrounding
conditions.
6.
REMOTE CONTROL SENSOR
7.
AUDIO/VIDEO IN SOCKETS (AV3)
connects the audio/video out sockets of external
these sockets.
equipment
to
S-VIDEO/AUDIO IN SOCKETS (S-AV) (option)
connects the video out socket of an S-VIDEO VCR to the SVIDEO socket.
connects the audio out sockets of the S-VIDEO VCR to the
audio sockets as in AV3.
8.
HEADPHONE SOCKET
connects the
6
(option)
headphone plug to this
socket.
Basic
operation
On and off
1.
2.
3.
4.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, Δ / Ε, TV/AV or
NUMBER buttons on the remote control handset to switch it on fully.
Press the POWER button on the remote control handset.
The set reverts to standby mode.
Press the main power button again to switch the set off.
Note : If the mains plug is disconnected while the set is switched
on, the set will be switched to standby mode. And when the mains
plug is replaced in the mains power socket again, the power is
switched on again.
Programme
selection
You can select
buttons.
a
POWER
MUTE
TV/AV
programme number with the
Δ
/
Ε
or
I/II
NUMBER
VOLUME
SOUND
Volume
adjustment
Press the
Φ
/
Γ
button to
TEXT
TURBO
adjust
the volume.
i
Quick view
PR
Press the SWAP button to view the last programme you
were
watching.
Mute function
PR
Press the MUTE button. The sound is switched off and the
W appears.
You can cancel it
SOUND button.
VOL
OK
VOL
by pressing
the MUTE,
Φ
display
SWAP
/ Γ, SSM, I/II, TURBO
123
Auto demonstration
456
programmed in the set, press the OK butcontrol
for about 5 seconds. To stop auto
panel
demonstration, press any button of the front panel control and
POWER button of the remote control handset.
789
To review all the
ton of the front
On
screen
menus
language
selection
The menu can be displayed
First select your language.
1.
2.
3.
4.
5.
6.
Press the
Press the
Press the
Press the
Press the
All the on
Press the
SSM
0
on
the
screen
in desired
language.
MENU button to select the Station menu.
Δ / Ε button to select Language.
OK button.
Δ / Ε button to select your desired language.
OK button.
screen displays will appear in the selected language.
TV/AV button to return to normal TV viewing.
7
On
screen menus
The
an
dialogue
operator
also
between you and your set takes place on screen with
The buttons required for the operating steps are
menu.
displayed.
Menu selection
1.
the MENU button to display each menu.
Press the Δ / Ε button to select a menu item.
The selected menu item changes from green to purple.
3. Press the Φ / Γ button to change the setting of a menu item or
OK button to display the sub menu.
Note :
In the AV mode, the Station menu is not displayed.
a.
b. In the teletext mode, menus are not displayed.
In some models, the Normal/Turbo search will not display,
c.
only the Start will display in the Auto programme menu.
d. In some models, the Super woofer will display in the Sound
menu. Only a set with Airo-dome speaker can perform this
function.
Repeatedly press
2.
POWER
MUTE
TV/AV
I/II
VOLUME
TEXT
MENU
i
PR
System
ProgrammeOedit
NormalOsearch
Language
TurboOsearch
OOO()OOKOMENUOTV
OK
VOL
BG
AutoOprogramme
ManualOprogramme
VOL
OOO()O}{OOMENUOTV
AV
Station
1
StorageOfrom
AV
menu
PR
80
'OContrast
ΩOBrightnessOO50
・OColourOOOOOO50
≥OSharpnessOOO50
123
O
O()O}{OOKOMENUOTV
456
AV
Picture
BG
System
Channel
V
UHF020
Fine
{{{
Search
Name
C020
1
Storage
OOO()O}{OOKOMENUOTV
AV
menu
789
0
OEqualizer
Flat
0
1
OARD
OFDZ
5
6
0
20
2
3
OOCO12
OOOOOSO4
OCH_5
7
OBalance
§Volume
4
O
OOO()O}{OOKOMENUOTV
AV
Sound
Input
ChildOlock
AutoOsleep
AVL
BlueOback
0
OOO()O}{OOKOMENUOTV
Special
TV programme
8
9
}{OOOOODeleteOOOOCopy
()OOOOOMoveOOOOvOOOOSkip
menu
TV
Off
Off
Off
Off
Tilt
8
OARD1
OFDZ1
OOCO12
OOSO44
CH_5
AV
menu
FlatOOOO
Music
Movie
Speech
User
OOOOOOOO0.1O0.5O1.5O5.0O10OkHzO
O
O()OMENUOTV
AV
Setting up
TV stations
Up to 100 TV stations can be stored in this set by programme numbers
(0 to 99). Once you have preset the stations, you will be able to use
the Δ / Ε or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Auto programme
AutoOprogramme
ManualOprogramme
tuning
ProgrammeOedit
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this
set.
1.
2.
3.
Station
Menu
Language
O
O()OOKOMENUOTV
AV
the MENU button to select the Station menu.
Press the Δ / Ε button to select Auto programme.
Press the OK button to display the Auto programme menu.
Repeatedly press
POWER
MUTE
BG
System
TV/AV
1
StorageOfrom
I/II
NormalOsearch
TurboOsearch
OOO()O}{OMENUOTV
4.
Press the
Δ
/
Ε
button to select
AV
System. Select
a
TV
withtheΦ/Γbutton;
5.
6.
7.
system
LL : SECAM L/L' (France: SECAM-L models only)
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I
: PAL I/II (U.K./Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
Press the Δ / Ε button to select Storage from.
Select the beginning programme number with the Φ / Γ button
or NUMBER buttons. Any number under 10 is entered with a
numeric '0' in front of it, i.e. '05' for 5.
Press the Δ / Ε button to select Normal or Turbo search.
Option:
In
some
models, only
can
VOLUME
TEXT
MENU
i
PR
OK
VOL
VOL
select Start.
Note :
a.
Turbo search is further faster than Normal search and in
some models, these searches will automatically store all receivable stations.
b. If the programmed station has poor quality sound, select the
system again in the Manual programme menu.
PR
123
456
System
StorageOfrom
System
StorageOfrom
BG
1
NormalOsearchO CO15
TurboOsearchO CO38
2OOOOOOOOOOOOOO2%
O
O
OOMENU
Press the OK button to
789
1
TurboOsearch
2OOOOOOOOOOOOOO2%
(Normal search)
8.
BG
NormalOsearch
0
OOMENU
(Turbo search)
begin
auto
programming.
All receivable stations are stored. The station name is stored for
stations which broadcast VPS (Video Programme Service),
PDC (Programme Delivery Control) or TELETEXT data. If no
station name can be assigned to a station, the channel number
is assigned and stored as C (V/UHF 01-69) or S (Cable 01-47),
followed by a number.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
9.
Press the TV/AV button to return to normal TV
viewing.
9
Setting up
Station
Menu
TV stations
Manual programme
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Language
OOO()OOKOMENUOTV
AV
tuning
Manual programme lets you manually tune and arrange the stations
in whatever order you desire. Also you can assign a station name with
five characters to each programme number.
1.
2.
3.
the MENU button to select the Station menu.
Press the Δ / Ε button to select Manual programme.
Press the OK button to display the Manual programme menu.
Repeatedly press
POWER
MUTE
BG
System
Channel
V
UHF020
Fine
TV/AV
{{{
Search
I/II
Name
C020
1
Storage
O
4.
VOLUME
i
PR
OK
VOL
5.
VOL
6.
PR
7.
123
Press the
Δ
/
Ε
button to select
AV
System. Select
a
TV
system
withtheΦ/Γbutton;
TEXT
MENU
O()O}{OOKOMENUOTV
8.
LL : SECAM L/L' (France: SECAM-L models only)
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I
: PAL I/II (U.K./Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
Press the Δ / Ε button to select Channel. Press the Φ / Γ button to select V/UHF or Cable as required.
If possible, select the channel number (1 to 69) directly with the
number buttons. Any number under 10 is entered with a numeric
'0' in front of it, i.e. '05' for 5.
Press the Δ / Ε button to select Search. Press the Φ / Γ button
to commence searching. If a station is found the search will stop.
If this station is the one required, press the Δ / Ε button to select
Storage. Select the desired programme number (0 to 99) with
the Φ / Γ button or NUMBER buttons. Any number under 10 is
entered with a numeric '0' in front of it, i.e. '05' for 5.
Press the OK button to store it. The display Stored will appear.
456
789
BG
System
Channel
Fine
0
V
UHF020
{{{
Search
NameOOOOOOOOOC020
1
Storage
Stored
9.
To store another station, repeat steps 4 to 8.
Assigning a station name
1. Repeat the 'Manual programme tuning' steps
2.
3.
4.
5.
10
1 to 3.
Press the Δ / Ε button to select Name.
Press the Γ button. You can use a blank, +, -, the numeric 0 to 9
and the alphabet A to Z.
With the Φ button you can select in the opposite direction.
Select the next position by pressing the OK button and then take
your choice of the second character, and so on.
Repeat the 'Manual programme tuning' steps 7 to 8.
TV stations
Setting up
Fine
Station
Menu
tuning
Normally
fine
tuning
is
only necessary
if
reception
is poor.
AutoOprogramme
ManualOprogramme
ProgrammeOedit
1.
2.
3.
Language
the 'Manual programme tuning' steps 1 to 3.
Press the Δ / Ε button to select Fine.
Repeat
Press the
Φ
/
Γ
button to fine tune for the best
OOO()OOKOMENUOTV
picture
AV
and
sound.
4.
5.
the 'Manual programme tuning' steps 7 to 8.
Press the TV/AV button to return to normal TV viewing.
Repeat
finely tuned programme will be indicated
during programme selection.
The
by yellow
POWER
MUTE
number
TV/AV
I/II
VOLUME
TEXT
MENU
i
PR
OK
VOL
VOL
PR
123
456
789
0
11
Setting up
Station
Menu
Programme
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Language
OOO()OOKOMENUOTV
AV
TV stations
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
2.
3.
the MENU button to select the Station menu.
Press the Δ / Ε button to select Programme edit.
Press the OK button to display the Programme edit menu.
Repeatedly press
POWER
MUTE
TV/AV
0
1
OARD
OFDZ
5
6
2
3
OOCO12
OOOOOSO4
OCH_5
7
4
I/II
8
9
OARD1
OFDZ1
OOCO12
OOSO44
CH_5
}{OOOOODeleteOOOOCopy
()OOOOOMoveOOOOvOOOOSkip
Deleting
VOLUME
TEXT
MENU
i
VOL
OK
a programme
Select a programme to be deleted with the Δ / Ε or Φ / Γ button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
Copying
1.
2.
PR
VOL
1.
2.
a programme
Select a programme to be copied with the Δ / Ε
Press the GREEN button.
All the following programmes are shifted down
or Φ
one
/
Γ
button.
position.
Moving
PR
PR
PR
INPUT
SWAP
1.
2.
3.
4.
a programme
Select a programme to be moved with the Δ / Ε or Φ / Γ button.
Press the YELLOW button.
Move the programme to the desired programme number with
the Δ / Ε button.
Press the YELLOW button again to release this function.
123
456
789
0
1
OARD
OFDZ
5
6
2
3
OOCO12
OOOOOSO4
OCH_5
7
4
8
9
OARD1
OFDZ1
OOCO12
OOSO44
CH_5
0
v()vvvOvvMoveOvOff
a programme number
Select a programme number to be skipped with the Δ / Ε or Φ / Γ
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped pro-
Skipping
1.
2.
3.
gramme.
When a programme number is skipped it means that you will be
unable to select it using the Δ / Ε button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Press the TV/AV button to return to normal TV
12
viewing.
Setting up
Calling
TV stations
the programme table
You can check the programmes stored in the memory
the programme table.
by displaying
table
Press the LIST button to display the Programme table menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
Displaying programme
1.
POWER
MUTE
0
1
OARD
OFDZ
5
6
2
3
OOCO12
OOOOOSO4
OCH_5
7
4
8
9
OARD1
OFDZ1
OOCO12
OOSO44
CH_5
OOO()O}{OOKOMENUOTV
TV/AV
I/II
LIST
AV
Note :
a.
You may find some blue programmes. They have been set up
to be skipped by auto programming or in the programme edit
mode.
b. Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
VOLUME
TEXT
MENU
i
PR
a programme in the programme table
Select a programme with the Δ / Ε or Φ / Γ button.
Then press the OK button.
The set switches to the chosen programme number.
Selecting
programme table
10 programme table pages in which contain 100 pro-
Paging through
There
are
grammes.
Pressing the
Δ
/
a
Ε
or Φ
/
Γ
button
repeatedly
VOL
OK
VOL
PR
PR
PR
INPUT
SWAP
turns the pages.
123
Press the TV/AV button to return to normal TV
viewing.
456
789
0
13
Picture
Picture
Menu
Picture
80
'OContrast
ΩOBrightnessOO50
You
can
ness
adjustment
adjustment
adjust picture contrast, brightness, colour intensity, sharp(NTSC AV only) to the levels you prefer.
and tint
・OColourOOOOOO50
≥OSharpnessOOO50
OOO()O}{OOKOMENUOTV
AV
1.
Repeatedly press
2.
Press the
Press the
3.
Δ
Φ
/
/
Ε
Γ
the MENU button to select the Picture menu.
button to select the desired picture item.
button to make appropriate adjustments.
POWER
MUTE
'OContrastOOOO80
ΩOBrightnessOO50
・OColourOOOOOO50
TV/AV
PICTURE
I/II
≥OSharpnessOOO50
LIST
EYE
Press the OK button to store it for the picture User.
To recall your preferred setting, press the PSM button until the
desired picture (Standard, Mild, Game, User or Dynamic)
appears. The picture Standard, Dynamic, Mild and Game are
programmed for good picture reproduction at the factory and cannot be changed.
4.
TEXT
MENU
TURBO
i
PR
VOL
OK
VOL
PR
PR
PR
INPUT
SWAP
123
Eye (option)
Eye is an optional function.
this function.
In some models, the set will
Only
a
set with eye
option
can
perform
automatically adjust the picture accordconditions.
This will enable you to enjoy the
ing
surrounding
most suitable picture according to the surroundings.
to the
Press the EYE/* button to switch the eye function
on or
off.
456
789
PSM
0
Off
When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.
in green does not appear continuAt this time the display
in
but
the
ously
display
yellow appears each time the picture condition changes.
Note
:
If you press the PSM
or
TURBO PICTURE button with the
eye function, the eye function is automatically switched off.
14
Picture
adjustment
Picture
Menu
Picture format
You
can
watch TV in various
(Wide), Zoom 1, Zoom 2.
Repeatedly press the ARC
formats ; Standard,
picture
16:9
80
'OContrast
ΩOBrightnessOO50
button to select your desired
picture
for-
mat.
・OColourOOOOOO50
≥OSharpnessOOO50
O
Standard (written in white)
This picture format is 4 to 3 of
general
O()O}{OOKOMENUOTV
AV
TV.
Standard (written in red) (option)
When your TV receives the wide screen signal from AV scart, it will
be automatically chang to the picture format to be sent.
16:9
You can
TV/AV
enjoy the cinema (the picture format of 16:9) or general TV
programme through the 16:9 mode.
The screen 16:9 is viewed just like that but the screen 4:3 is magnified to the left and right so that the screen 16:9 is full.
POWER
MUTE
PICTURE
ARC
I/II
EYE
VOLUME
TURBO
Zoom 1
You can enjoy the cinema in a vast screen through the Zoom mode.
The screen 4:3 is magnified to the upper / lower and left / right sides
so that the screen 16:9 is full. The bottom and top of the picture
may be lost.
LIST
MENU
TEXT
i
Zoom 2
You can enjoy more magnified screen in this mode. The screen
Zoom 2 is viewed just like that but the screen 16:9 is magnified to
the upper and lower so that the screen Zoom 2 is full.
PR
Note :
a.
When you switch the set to standby or off, the 16:9 or Zoom
picture format is reset to the Standard (4:3).
b. In the PC mode, 16:9, Zoom 1 and Zoom 2 picture format is
not available.
INPUT
PR
SWAP
123
456
Turbo
picture
selection
(option)
789
When this function is on, picture will be more brilliant and distinct
picture than normal picture. You can enjoy the Turbo picture so
much better than normal picture.
Repeatedly press the TURBO PICTURE button to switch on or off.
(Turbo picture off)
Note
:
If you press the PSM
PSM
0
(Turbo picture on)
or
EYE/* button with the Turbo
picture
function, the Turbo picture function is automatically switched off.
15
Sound
Sound
Menu
Sound
adjustment
adjustment
You
OEqualizer
Flat
§Volume
0
20
OOO()O}{OOKOMENUOTV
AV
OBalance
can select your preferred sound setting; Flat, Music, Movie or
Speech as you prefer. Also you can adjust the sound frequence of
equalizer, balance, headphone volume/sound or super woofer
on/off (option). The Turbo sound creates an all around sound as in
a concert hall and the optional woofer sound stresses and empha-
sized bass.
1.
2.
POWER
MUTE
3.
TV/AV
ARC
I/II
the MENU button to select the Sound menu.
button to select the desired sound item ; Equalizer,
Balance, §Volume (option) or Super woofer (option).
Press the Φ / Γ button to make desired adjustment.
Press the OK button in Equalizer to set the Equalizer User.
Repeatedly press
Press the
Δ
/
Ε
LIST
EYE
FlatOOOO
Music
MovieOOO_
VOLUME
SOUND
Speech
TEXT
MENU
TURBO
UserOOOO
OOOOOOOO0.1O0.5O1.5O5.0O10OkHzO
OOO()O}{OOKOMENUOTV
AV
Select User by pressing the Δ / Ε button.
b. Select a sound band by pressing the Φ / Γ button.
c. Make appropriate sound level with the Δ / Ε button.
d. Press the OK button to store it for the sound User.
The display Stored appears.
a.
i
PR
VOL
OK
VOL
Press the TV/AV button to return to normal TV
PR
PR
PR
INPUT
SWAP
123
456
789
PSM
viewing.
To recall your preferred setting, press the SSM button until the
desired sound (User, Flat, Music, Movie or Speech) appears.
The sound Flat, Music, Movie and Speech are programmed for
good sound reproduction at the factory and cannot be changed.
If you press the SSM button after making appropriate adjustdisplay User automatically appears even
though you have already set a factory preset setting; Flat, Music,
Movie or Speech.
Note
:
ment in Sound menu, the
SSM
0
Turbo sound selection
(option)
When this function is on, sound will be more emphasized and
amplified sound than normal sound. You can enjoy the Turbo
Sound so much better than normal Sound.
Repeatedly press the TURBO SOUND button to switch on or off.
0.1
0.5
1.5
5.0
10 KHz
(Turbo sound off)
16
0.1
0.5
1.5
5.0
10 KHz
(Turbo sound on)
Sound
Stereo/Dual
adjustment
reception
When a programme is selected, the sound information for the station appears after the programme number and station name disap-
pear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button twice again.
I/II
selection for dual language broadcast
If a programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I II by pressing the I/II button
Language
repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
speakers.
DUAL I II sends
NICAM
a
separate language
to each
loudspeaker.
reception
If your set is equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
2.
3.
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I II or MONO. When
FM mono is selected the display MONO appears on the
screen.
Sound output selection
In AV mode, you
can
select output sound for the left and
right
loud-
speakers.
Repeatedly press the I/II button to select the sound output.
:
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loudspeaker.
L+L :
Audio signal from audio L input is sent to left and right loudspeakers.
R+R :
Audio signal from audio R input is sent to left and right loudspeakers.
L+R
17
Other functions
Special
TV and AV modes
Menu
TV
Off
Off
Off
Off
Input
ChildOlock
AutoOsleep
AVL
BlueOback
Tilt
0
OOO()O}{OOKOMENUOTV
AV
Inputs can be set for TV or AV mode. AV mode is used when a video
cassette recorder (VCR), or other equipment is connected to the set.
Note : When a VCR is connected via the aerial socket the set is
used in TV mode. See the 'Connection of external equipment' section.
1.
2.
3.
POWER
MUTE
TV/AV
Press the
Δ
/
Ε
Special
menu.
PresstheΦ/ΓbuttontoselectTV,AV1,AV2,AV3orPC.
The three AV modes and external equipments are :
AV1 : VCR connected to the Euro scart socket 1 on the back
AV2 : VCR connected to the Euro scart socket 2 on the back
AV3 : VCR connected to the AV3 sockets on the side panel
PC : PERSONAL COMPUTER connected to the PC sockets
on the back panel (option)
I/II
Note : PC monitor
is 640X480.
VOLUME
the MENU button to select the
button to select Input.
Repeatedly press
can
be
input only
when the resolution of the PC
TEXT
MENU
To return to TV mode, press the
Alternatively you
can
Δ
/
select the TV
TV/AV button.
Ε or
or
NUMBER buttons.
AV mode
by pressing
the
i
PR
Auto AV
VOL
OK
VOL
PR
PR
PR
INPUT
SWAP
switching
If your VCR outputs switching voltage when it is switched to playback with the VCR connected to the Euro scart socket 1 or 2. The
set is automatically switched to AV 1 or AV 2 mode when an AV signal is input. But if you want to keep on watching TV mode, press the
Δ / Ε or NUMBER buttons.
Press the TV/AV button to return to AV modes.
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
2.
3.
4.
the MENU button to select the Special menu.
Press the Δ / Ε button to select Child lock.
Press the Φ / Γ button on the remote control handset to select On.
Press the TV/AV button to return to normal TV viewing.
Repeatedly press
With the lock on, the display Child lock on appears on the screen
if any button on the front panel is pressed while viewing the TV.
Note : The display Child lock on will not appears on the screen if
any button on the front panel is pressed while displaying the menus.
Auto
sleep
If you select Auto sleep On the set will automatically switch itself
to standby mode approximately ten minutes after a TV station stops
broadcasting.
1.
2.
3.
18
the MENU button to select the
button to select Auto sleep.
button to select On.
Repeatedly press
Press the
Press the
Δ
Φ
/
/
Ε
Γ
Special
menu.
Other functions
AVL
Special
(Auto volume leveler)
Menu
If you select AVL On, the set automatically
ume level even if you change programmes.
keeps
on an
equal
vol-
TV
Off
Off
Off
Off
Input
ChildOlock
AutoOsleep
AVL
BlueOback
1.
2.
3.
4.
the MENU button to select the Special
Press the Δ / Ε button to select AVL.
Press the Φ / Γ button to select On.
Press the TV/AV button to return to normal TV viewing.
Repeatedly press
menu.
Tilt
0
OOO()O}{OOKOMENUOTV
AV
POWER
MUTE
Blue back
If you select Blue back On, the blue background appears
when there is no or poor signal.
on
1.
menu.
the
TV/AV
I/II
screen
2.
3.
4.
the MENU button to select the Special
Press the Δ / Ε button to select Blue back.
Press the Φ / Γ button to select On or Off.
Press the TV/AV button to return to normal TV viewing.
Repeatedly press
VOLUME
TEXT
MENU
Tilt
i
PR
The TV
another
1.
2.
3.
4.
picture may tilt to the
position. This function
left
can
or right if the TV set moves to
be used to compensate the tilt.
Repeatedly press the MENU button to select the Special
Press the Δ / Ε button to select Tilt.
Press the Φ / Γ button to adjust the tilt.
Press the TV/AV button to return to normal TV viewing.
Sleep
menu.
timer
VOL
PR
123
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time elapses.
Press the SLEEP button to select the number of minutes. The diswill appear on the screen, followed by 10, 20, 30, 60, 90,
play r
120, 180 and 240. The timer begins to count down from the number
of minutes selected.
---
Note :
a.
To view the
OK
VOL
remaining sleep time, press
456
789
SLEEP
0
M
the SLEEP button
once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
until the display r
appears.
When you switch the set off, the set releases the preset sleep
time.
---
c.
19
PIP
operation (option)
Option
PIP is
:
an
optional function,
so
that
only
the set with PIP function
can
operate.
PIP
(Picture
in
Picture) displays
a
picture
within
a
picture.
On and off
Press the PIP button to switch on the sub
Press this button again to switch it off.
picture.
POWER
MUTE
Programme
TV/AV
I/II
PIP
VOLUME
TEXT
picture (option)
Press the PR +/- buttons in AV mode. The selected programme
number is displayed at the left upper side of sub picture.
Input
mode selection for sub
picture
Press the INPUT button while the sub
main picture.
POSITION
STILL
selection for sub
LIST
SIZE
picture
remains within the
Each time this button is pressed, each input mode for the sub
displayed as shown below at the left upper side of sub
ture is
picpic-
ture.
VOL
OK
VOL
PR
Programme
number
AV2
AV1
AV3
INPUT
PR
Swapping
SWAP
MIX
between main and sub
Press the SWAP button to
exchange
pictures
the main and sub
pictures.
123
TIME
Sub
456
picture
size
REVEAL
789
SLEEP
0
M
Repeatedly press the SIZE button to select the desired sub picture
size. The sub picture appears as 1/4 size of the main picture, followed by 1/9.
Sub
picture
freeze
Press the STILL button to freeze motion of the sub
Press this button again to restore motion.
Sub
picture.
picture position change
Press the POSITION button repeatedly until desired
achieved. The sub picture moves clockwise.
20
position
is
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
a
set
free service broadcast by most TV stations which gives
information on news, weather, television proshare
grammes,
prices and many other topics.
Teletext is
a
up-to-the-minute
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
Switch on/off
Press the TEXT button to switch to teletext. The initial page or last
selected page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT or TV/AV button to switch off teletext. The previous
mode reappears.
POWER
MUTE
TV/AV
I/II
LIST
VOLUME
TEXT
i
PR
SIMPLE text
selection
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The Δ / Ε button can be used to select the preceding or fol-
1.
2.
lowing page.
a colour button in LIST mode
If the TV is in SIMPLE text, TOP text or FASTEXT mode, press the
M
button to switch to LIST mode.
Programming
VOL
OK
VOL
Page
PR
PR
PR
INPUT
SWAP
123
456
789
SLEEP
Four teletext page numbers of your choice can be colour coded and
easily selected by pressing the corresponding coloured button on
the remote control handset.
1. Using the NUMBER buttons, select the page you wish to pro2.
3.
4.
0
M
gramme.
Wait until the page is displayed on the screen and press the OK
button. The page numbers in the colour boxes along the bottom
of the screen change to "000?".
Press a colour button to store the page number. From now on,
you can select this page with the same coloured button.
The three other coloured buttons are programmed in the way.
21
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
POWER
MUTE
TV/AV
I/II
Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the Δ button can be used.
4. The red button permits to return to previous selection.
Alternatively the Ε button can be used.
Direct page selection
VOLUME
TEXT
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
9/4PIP
i
FASTEXT
PR
VOL
OK
VOL
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
1.
PR
PR
PR
INPUT
2.
SWAP
3.
123
4.
lowing page.
456
789
SLEEP
0
22
selection
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The Δ / Ε button can be used to select the preceding or fol-
Page
M
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
POWER
MUTE
Selects double
height text.
this button to enlarge the top
this button again to enlarge
Press
Press
page.
Press this button
again
half of the page.
the bottom half of the
to return to the normal
new
LIST
VOLUME
the TV
teletext
hand
I/II
display.
UPDATE
Displays
TV/AV
corner
picture on the
page. The display
of the
screen
while
waiting
will appear at the top left
updated page is avail-
POSITION
STILL
When the
screen.
TEXT
for the
9/4PIP
SIZE
will change to the page number.
able then display
Press this button to view the updated teletext page.
i
PR
HOLD
Stops
the automatic page
change
which will
occur
if
a
tele-
text page consists of 2 or more sub pages. The number of
OK
VOL
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
stop symbol is displayed
at the
top left-hand
corner
VOL
PR
of the
and the automatic page change is inhibited.
To continue press this button again.
screen
MIX
123
TIME
MIX
456
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
REVEAL
789
To switch the TV
picture
off press this button
again.
SLEEP
0
M
TIME
When
viewing
a
TV programme, press this button to display
right hand corner of the screen. Press
the time at the top
this button again to
remove
the
display.
In the teletext mode,
press this button to select a sub page number. The sub
page number is displayed at the bottom of the screen. To
hold
or
change
the sub page, press the
Δ
/
Ε
or
NUMBER
buttons.
Press
again
to exit this function.
23
Connection of external
You
connect additional
can
equipment
equipment,
such
as
VCRs, camcorders
etc. to your set.
Here shown may be somewhat different from your set.
Aerial socket
1.
2.
ANT IN
LL 75Ω
1
3.
2
4.
VCR
5.
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
Euro scart sockets
1.
2.
ANT IN
LL 75Ω
1
2
VCR
Connect the Euro scart socket of the VCR to the Euro scart
socket 1 or 2 of the set.
Press the PLAY button on the VCR.
If your VCR outputs a switching voltage connect to Euro scart
socket 1 or 2, the set will switch to AV 1 or AV 2 mode automatically. But if you want to keep on watching TV mode, press the
Δ / Ε or NUMBER buttons.
Otherwise press the TV/AV button
on
set to select AV 1 or AV 2. The VCR
on
the
You
the remote control hand-
playback picture appears
screen.
can
also record programmes received
by
the TV
on
video
tape.
Note
a.
b.
:
i.e. the signals red, green and blue can only
be selected for the Euro scart socket 1 (not Euro scart 2).These
signals are transmitted, for example, by a computer, pay TV
decoder, game machine or photo CD unit, etc.
If both Euro scart 1 and 2 sockets have been connected to the
VCRs simultaneously, only the AV 1 can be received.
Signal type RGB,
Audio/Video in sockets
1.
S-VIDEO
2.
L/MON
AUDIO
R
VCR
24
AV3
3.
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set.
Press the TV/AV button to select AV 3.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket on the side panel.
Connection of external
S-Video/Audio in sockets
S-AV is an optional function.
form this function.
When
connecting
picture quality will
1.
2.
3.
4.
equipment
(S-AV) (option)
Only
a
set with S-AV
option
can
per-
an S-VIDEO VCR to the S-VIDEO socket, the
be further improved.
S-VIDEO
L/MON
Connect the S-Video socket of the VCR to the S-VIDEO socket on the side panel of the set.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets on the side panel of the set.
Select AV 3 by pressing the TV/AV button repeatedly.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
AUDIO
R
AV3
S-VIDEO VCR
Note : If both S-VIDEO and VIDEO sockets have been connected
to the S-VHS VCR simultaneously, only the S-VIDEO can be
received.
Headphone
socket
(option)
Headphone is an optional function. Only
option can perform this function.
Insert the
headphone plug
to the
a
set with
headphone
socket
Headphone
S-VIDEOL/MN
the side
on
panel.
You
listen to the sound through the headphone and the TV's
To adjust the headphone volume in the Sound menu,
press the Δ / Ε button to select §Volume then the Φ / Γ button.
See the 'Sound adjustment' section.
can
AUDIO
speakers.
If you press the MUTE button,
switched off.
only
the sound from the TV's
R
AV3
speakers
are
programme is received in dual language, you can select
DUAL I II) for the sound from
from the TV's speakers. In the
Sound menu, press the Δ / Ε button to select§Volume then
I/II button to select the desired language; I, II or I II.
At this time if the set is in AV mode, the I/II button selects output
When
a
language (DUAL I, DUAL II or
the headphone regardless of that
a
OEqualizer
Flat
0
OBalance
§Volume
[00 I]20
O
O
O()O}{OOKOMENUOTV
AV
sound;LR,LLorRR,inturn.
PC in socket
(option)
This is an optional function.
this function.
1.
2.
3.
4.
Only
a
set with this
option
can
perform
Connect the monitor output socket of the PERSONAL COMPUTER to the PC input socket on the back panel of the set.
Connect the audio cable from the PC to the Euro scart socket
2 on the back panel of the set.
Press the TV/AV button to select PC.
Turn the PC on, and the PC screen appears on the set.
The set can be operated as the PC monitor.
ANT IN
L L 75Ω
1
2
PERSONAL COMPUTER
25
Troubleshooting
check list
Symptoms
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
Check aerial
(broken lead?)
into
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)