advertisement
▼
Scroll to page 2
of 36
DLP PROJECTION TV OWNER'S MANUAL Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back information to your dealer when you Model number : Serial number : P/NO : 3828VA0485A (MB04EA, 116X TX, and quote this require service. cover 486-395C) b Contents Installation 3 Location and function of controls Remote control handset / Battery installation Front panel / Rear panel 4 Basic operation On and off / Programme selection Volume adjustment / Mute function 8 On 9 screen menus Menu selection SETUP menu Auto programme tuning Manual programme tuning Booster (option) / Fine Tuning 10 PICTURE 15 Digital signal strength (In Digital mode only) Programme edit / Calling the programme table menu PSM(Picture Status Memory) Picture adjustment / Adjusting / Video Auto Colour Control preset AUDIO menu SSM (Sound Status Memory) AVL (Auto Volume Leveler) Adjusting Sound Control Front surround / Speaker adjustment Sound output selection (In Analogue mode Stereo reception (In Analogue mode only) TIME menu Auto clock setup / Manual clock setup Setting the On/Off time / Sleep timer / Auto only) 20 sleep SPECIAL menu Main Picture Source Selection Subtitle (In Digital mode only) / Child Lock Picture format / Demo 23 LOCK menu Lock setup 26 Picture in picture (PIP) function On and off / Input mode selection for sub picture Swapping between main and sub pictures Programme selection for sub picture Sub picture position change 27 Teletext Switch on/off / TOP text (option) FASTEXT / Special teletext functions 28 Other functions EPG (Electronic 31 Programme Guide) Connection of PC PC in socket / RGB-PC / DVI-PC Mode 32 (option) Connection of external equipment Aerial socket / Audio/Video input sockets S-Video/Audio input sockets (option) Monitor output sockets DVD input sockets / DTV input sockets Troubleshooting 2 17 check list 34 (option) Installation Power This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set. In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs. Warning To prevent fire moisture. or shock hazard, do not expose the set to rain or Service Never remove the back cover of the set as this can expose you to and other hazards. If the set does not operate and call your dealer. high voltage properly, unplug it very Aerial Connect the aerial cable to the socket marked +75 Ω on the back cover. For the best reception an outdoor aerial should be used. Location Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken not to expose the set to any unnecessary vibration, moisture, dust or heat. Also ensure that the set is placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover. Avoid having a fixed image remain on the screen for a of time. Typically a frozen still picture from a VCR, 4:3 mat or if a CH label is present; the fixed image may remain visible on the screen. long period picture for- DVB is a registered trademark of the DVB Project 3 Location and function of controls All the functions can be controlled with the remote control handset. Some functions can also be adjusted with the buttons on the front panel of the set. Remote control handset TV VCR DVD Before you use the remote control handset, teries. See the next page. CABLE HDSTB AUDIO 1. D/A TV MODE TV/AV MULTIMEDIA POWER 1 23 4 789 TEXT 5 MUTE 6 MULTIMEDIA selects Component DVI-PC modes. NUMBER BUTTONS switches the set on from 5. SLEEP sets the INFO LIST GUIDE PIP 7. 9 10 8. OK MENU 14 directly select on or SSM PLAY PAUSE STOP VOL +/- (Volume Up/Down) Increases/decreases sound level. PR +/- (Programme Up/Down) selects a programme. INFO information on top of the screen during watching GUIDE shows a programme schedule. REW FF 10. LIST displays RECORD the programme table. 11. OK accepts your selection SIZE TIME REVEAL SWAP STILL ? MIX or displays the current mode. Δ/ΕorΦ/Γ SKIP PIP PR+ UPDATE number. off. adjusts menu settings. selects menu item. PIP INPUT I/II INDEX 12. MENU selects a menu. 13. PSM (Picture Status recalls your preferred Memory) picture setting. 14. VCR BUTTONS control a LG video cassette recorder. 15. MODE selects another device. 16. POWER switches the set 17. ARC on Ratio from standby Control) (Aspect changes the picture format. 4 a EXIT PSM PIP PR- or or timer. MUTE switches the sound displays 9. 12 13 sleep standby DVI-DTV PR 6. 11 1/2, RGB-DTV, RGB-PC, 4. FAVOURITE VOL 7 8 3. 0 install the bat- mode. TV/AV selects the remote operating mode. switches the set on from standby. 456 SLEEP digital or 2. ARC 123 D/A TV selects analogue please or off to standby. the TV. Location and function of controls 18. TELETEXT BUTTONS These buttons are used for teletext. For further details, see the 'Teletext' section. switches the subtitle on or off in Digital mode. TV 19. FAVOURITE selects a favourite programme. VCR DVD CABLE HDSTB 20. PIP BUTTONS PIP switches the sub picture on or off. PR +/selects a programme for the sub picture. SWAP alternates between main and sub picture. INPUT selects the input mode for the sub picture. AUDIO 15 D/A TV MODE TV/AV MULTIMEDIA on-screen displays and returns to TV viewing from any 1 2 3 4 5 6 7 8 9 SLEEP TEXT 18 0 menu. 22. SSM (Sound Status Memory) recalls your preferred sound setting. 23. I/II selects the language during dual selects the sound output. changes the audio mode (MPEG 24. STILL freezes motion of the MUTE language broadcast. FAVOURITE VOL PR INFO LIST 19 GUIDE or AC3) 16 ARC 17 21. EXIT Clears all POWER in Digital PIP 20 mode. picture. OK In teletext mode, the PIP PR +/-, SWAP and PIP INPUT buttons are used for teletext function. Note : Battery MENU installation The remote control handset is powered by two AA type batteries. To load the batteries, turn the remote control handset over and open the battery compartment. Install two batteries as indicated by the polarity symbols ( + and ) marked inside the compartment. - EXIT PSM SSM PLAY PAUSE STOP REW FF PIP PR- SIZE TIME REVEAL RECORD SKIP PIP PR+ UPDATE 21 22 SWAP STILL PIP INPUT I/II 23 ? MIX INDEX 24 Note : To avoid damage from possible battery leakage, remove the batteries if you do not plan to use the remote control handset for an extended period of time. 5 Location and function of controls Front panel Lamp indicator, temperature indicator, and operation indicator, located side the front panel operating status of the DLP (Digital Light Processing) projection TV. controls reveal the 1 2 TV/AV MENU OK VOL 345 1. VOL 6 MAIN POWER (ON/OFF) switches the set on or off. PR PR 8 7 7. Δ / Ε 910 (Programme Up/Down) selects a programme or a menu item. switches the set on from standby. 2. REMOTE CONTROL SENSOR 3. TV/AV selects the remote operating mode. switches the set on from standby. 8. OPERATION INDICATOR (Refer 9. LAMP INDICATOR to (Refer MENU selects a menu. OK accepts your selection or displays mode. 6. 6 (Refer to p.7) faint white trace on the to the position. This is normal and is a characteristic of the Note : There might be center of the screen 5. p.7) p.7) 10. TEMPERATURE INDICATOR 4. to Φ / Γ (Volume Down/Up) adjusts the volume. adjusts menu settings. the current screen. a according Location and function of controls Rear panel (R) AUDIO VIDEO3 INPUT SOCKET (L)/ MONO VIDEO S-VIDEO S-VIDEO INPUT SOCKET VIDEO3 PRADPRT RGB INPUT PC/DTV COMPONENT DIGITALAUDIO OPTICAOUPUT INPU T2 INPUT1 Y (XGA 480p 720p 1080i) RGB/DVIINPUT D GITALAUDIO OPTICALNPUT1 (COMPNNT2) SVIDEO PB DIGITALAUDIO OPTICALNPUT2 PR AUDO CENTER MODEIN DVI) (XGA /480p /720p /1080i) DVI A/V1 INPUT A/V2 INPUT MONTOR OUT VIDEO VARABLE AUDIOOUT PCDTV (L) (L) (L) MONO AUDIO (R) DVD AUDIO (R) INPUT RGB INPUT SOCKETS AERIAL SOCKET UPGRADE PORT This upgrade port is used the software debug the hardware. without use INPUT2 OPTICAL OUTPUT INPUT1 (COMPONENT2) OUT(AUDIO/VIDEO), (R) PR VIDEO1/2 / MONITOR S-VIDEO AUDIO DIGITAL AUDIO OPTICAL INPUT2 VIDEO 1 VIDEO 2 MONITOR INPUT INPUT OUT S-VIDEO INPUT SOCKETS AUDIO CENTER MODE IN (DVI) a appropriate input port. (L) OPTICAL INPUT1 connector from PC to the RGB/DVI INPUT Y DIGITAL AUDIO DIGITAL AUDIO OPTICAL OUTPUT/ DIGITAL AUDIO OPTICAL INPUT1 (COMPONENT2)/DIGITAL AUDIO OPTICAL INPUT2 (DVI) digital output this contact your service centre. PB Connect Connect the monitor (XGA /480p /576p /720p /1080i) COMPONENT DIGITAL AUDIO port. Just or RGB/DVI INPUT PC/DTV ver- sion and dealer RGB INPUT to changing Be careful not to UPGRADE PORT VIDEO VARIABLE AUDIO OUT PC/DTV (XGA /480p /576p /720p /1080i) audio from (L) AUDIO MONO AUDIO (R) AUDIO (R) (R) types of equipment. Note: In standby mode, these ports will not work. VARIABLE AUDIO OUT SOCKETS (L) (L) various ?Status DVI INPUT DTV/DVD INPUT SOCKETS DTV/DVD INPUT Indicators Operation Lamp Indicator Off Power cord is not connected. Red Power Cord is connected, unit is Green On Orange (flashing) Orange Preparing operation Indicator needs to be Green Temperature Indicator Projection lamp (flashing) The lamp is in cover with the end of its life and a new lamp. is not closed. Orange The set is Red The set has shut down due to Red The set has shut down, check the (flashing) standby. standby. reaching replaced on overheating. overheating. cooling fan. 7 Basic Operation On and off 1. TV VCR DVD CABLE HDSTB 2. AUDIO D/A TV POWER TV/AV MULTIMEDIA 1 2 4 56 7 89 3. PR+/-, TV/AV, MULTIMEDIA or NUMBER button on the remote control handset to turn it on fully. The LED will blink orange for a while and then lit up green when the power is successfully on. To turn the set off, press the power button on the remote control handset. The set reverts to the stand-by mode. 3 Note : a. The lamp cooling fan will continue to spin for approximately 120 seconds after the power is turned off by the remote control handset. b. Normally, don't push off the main power switch. Instead, use the remote control to turn the power off. c. When the set is turned on again immediately after turning off, it takes around 30 to 50 seconds for sufficient cooling. d. When the power is switched off using the main power switch on the set, the internal cooling system also stops operating. Therefore, power-on by main power switch takes around 30 to 50 seconds for sufficient cooling. e. Forced Power-Off : When the set decides itself that the circumstance is not proper for operation, the set will goes to the standby mode automatically. Please retry to turn on the set after a short period of time. f. When the set is switched on, there might be a strange sound from the set. 0 MUTE VOL Before turning the set on, be sure that the main power switch the set is pushed on. When the main switch is pushed on, the LED will be lit up red. This mode is Stand-by. If the set is in stand-by mode, press the POWER, D/A TV, on PR OK MENU SSM Programme selection You can select buttons. a programme number with the PR+/- or NUMBER SWAP I/II Volume adjustment Press the VOL+/- button to adjust the volume. Mute function Press the MUTE button. The sound is switched off and the display Mute appears. You can cancel it 8 by pressing the MUTE, VOL+/-, SSM, I/II button. On Screen Menus The dialogue between you and your set takes place required for the operating steps are also displayed. on screen with an operator menu. The buttons Menu selection 1. Press the MENU button and then Δ / Ε button to 2. Press the Γ button and then the Δ / Ε button to select 3. Repeatedly press SETUP SETUP Γ display each the MENU button to return to normal TV Auto programme viewing. SETUP SETUP PSM Manual programme PICTURE PICTURE PICTURE Γ Programme edit AUDIO Signal strength AUDIO Booster TIME TIME menu. item. a menu TIME Contrast 100 Brightness 60 Colour 60 Sharpness 75 Tint 0 R G Colour temp. SPECIAL SPECIAL SPECIAL SPECIAL LOCK LOCK LOCK LOCK SETUP Set PICTURE menu SETUP SETUP Lock system SETUP Video preset SSM password AVL PICTURE PICTURE PICTURE Block programme AUDIO Parental guidance AUDIO AUDIO Γ Aux. block TIME TIME TIME SPECIAL SPECIAL SPECIAL SPECIAL LOCK menu Balance 0 Treble 50 Bass 50 L R Front surround LOCK Main Sub AUDIO menu SETUP SETUP input Manual clock PICTURE PICTURE Subtitle Off time Child lock AUDIO AUDIO ARC TIME TIME menu Auto clock input PICTURE AUDIO speaker LOCK LOCK Γ SETUP TV TIME Demo SPECIAL SPECIAL LOCK LOCK LOCK LOCK menu Sleep timer Auto sleep Γ SPECIAL Γ SPECIAL On time TIME menu 9 SETUP Menu SETUP SETUP Γ Auto programme Manual programme PICTURE Programme edit AUDIO AUDIO Up to 100 TV stations can be stored in this set by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the Δ / Ε or NUMBER buttons to scan the stations you programmed. Stations can be tuned using automatic or manual modes. Signal strength Auto programme Booster TIME TIME tuning All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set. SPECIAL SPECIAL 1. LOCK LOCK 2. Press the MENU button and then Δ / Ε button to select the SETUP menu. Press the Γ button and then Δ / Ε button to select Auto pro- gramme. SETUP SETUP TV VCR Auto programme Γ Storage from Manual programme To start 50 PICTURE PICTURE DVD Programme edit CABLE HDSTB AUDIO AUDIO AUDIO Signal strength Booster TIME SPECIAL SPECIAL LOCK 1 4 2 MENU 3 56 3. Prev. Press the Γ button to select Storage from. Select the beginprogramme number with the Δ / Ε button or NUMBER buttons on the Storage from menu. Press the Γ button to select To start. Press the Γ button to begin auto programming. ning 7 89 4. 0 5. SETUP SETUP Auto programme Storage from Manual programme To start 50 Γ PICTURE PICTURE Programme edit AUDIO AUDIO Processing Auto programme... Signal strength 3% Booster 1 channel found TIME Press digital SPECIAL SPECIAL OK (OK) to start programme scan. LOCK M MENU All receivable stations are Prev. stored. Option: In Australia, if no station name can be assigned station, the channel number is assigned and stored as MENU to a folstation name' section to ----- lowed assign 6. number see by the station name. a 'Assigning a To stop auto programming, press the MENU button. When auto programming is completed, the Programme edit menu appears on the screen. See the 'Programme Edit' section to edit the stored programme. Repeatedly Press the MENU button to return to normal TV viewing. Note : a. To begine auto programming or 4-digit password in Lock system b. 10 manual programming, input a on. Be sure to remember this number! If you forgot your password, press '7', '7', '7', '7' control handset. on the remote SETUP Menu Manual programme tuning SETUP SETUP Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station name with five characters to each programme number. Γ Auto programme Manual programme PICTURE PICTURE Programme edit AUDIO AUDIO Signal strength Booster TIME 1. 2. Press the MENU button and then Δ / Ε button to select the SETUP menu. Press the Γ button and then Δ / Ε button to select Manual SPECIAL SPECIAL LOCK LOCK programme. SETUP SETUP Auto programme Band Manual programmeΓ Channel Programme edit Search Up/Down Signal strength Fine Up/Down Booster Name V/UHF 47 PICTURE PICTURE AUDIO AUDIO TV VCR DVD CABLE TIME Storage C5 HDSTB AUDIO 10 SPECIAL SPECIAL LOCK LOCK MENU 3. 4. 5. 6. 7. 8. 9. Prev. Press the Γ button to select Band. Press the Δ / Ε button to select V/UHF or Cable as required. Press the Γ button to select Channel. Select the desired channel number with the Δ / Ε button. Press the Γ button to select Search. Press the Δ / Ε button to commence searching. If a station is found the search will stop. If this station is the one required, press the Φ / Γ button to select Storage. Select the desired programme number with the Δ / Ε button. Press the OK button to store it. To store another station, repeat steps 3 to 8. Repeatedly press the MENU button to return to normal TV 1 2 3 4 56 7 89 0 viewing. Assigning a station name 1. Repeat the 'Manual programme tuning' steps 2. 3. 4. 5. 6. OK 1 to 2. Press the Γ button to select Name. Press the Δ button. You can use a blank, +, -, the numeric 0 to 9 and the alphabet A to Z. With the Ε button you can select in the opposite direction. Select the next position by pressing the Γ button and then take your choice of the second character, and so on. Press the OK button. Repeatedly press the MENU button to return to normal TV MENU viewing. 11 SETUP Menu SETUP SETUP Γ Auto programme Manual programme PICTURE Programme edit AUDIO AUDIO Signal strength Booster TIME TIME Booster If the reception is poor at the fringed area of TV signal, select Booster to On. When the picture condition is good, do not select Booster to On. 1. 2. 3. SPECIAL SPECIAL (option) LOCK LOCK 4. Press the MENU button and then Δ / Ε button to select the SETUP menu. Press the Γ button and then Δ / Ε button to select Booster. Press the Γ button and then Δ / Ε button to select On or Off on the Booster pull-down menu. Repeatedly press the MENU button to return to normal TV viewing. TV VCR Fine tuning DVD CABLE HDSTB AUDIO Normally 1. 2. 3. fine tuning is only necessary if is poor. reception the 'Manual programme tuning' steps 1 to 2. Press the Γ button to select Fine. Press the Δ / Ε button to fine tune for the best picture and sound. Repeat SETUP SETUP Auto programme Band Manual programme Channel Programme edit Search Signal strength Fine Up/Down Name BLN 2 V/UHF 47 PICTURE AUDIO Up/Down TIME TIME Storage 10 SPECIAL SPECIAL LOCK LOCK MENU 4. 5. Prev. Store Press the OK button. Repeatedly press the MENU button to return to normal TV viewing. The finely tuned programme will during programme selection. be indicated by yellow number OK Digital signal strength (In Digital MENU mode only) Reveals how strong your DTV signal is and whether you need to adjust your antenna. The higher the signal strength, the less likely you are to experience picture degradation. Digital DTV Signals; May broadcast 1. 2. on not be available in all areas, nor are all programs. Press the MENU button and then Δ / Ε button to select the SETUP menu. Press the Γ button and then Δ / Ε button to select Signal strength. View the on-screen signal the signal being received. 12 strength monitor to see the quality of SETUP Menu Programme edit SETUP SETUP This function enables you to delete or skip the stored programs. Also you can move some stations to other programme numbers or copy a blank station data into the selected programme number. 1. 2. 3. Press the MENU button and then Δ / Ε button to select the SETUP menu. Press the Γ button and then Δ button to select / Ε Programme edit. Press the Γ button to display the Programme edit menu. Γ Auto programme Manual programme PICTURE PICTURE Programme edit AUDIO AUDIO Signal strength Booster TIME SPECIAL SPECIAL LOCK LOCK 0 S6 ANALOGUE DIGITAL 0S6 1S6 2S6 3S6 4 C9A 5 C12 6 7 8 C53 9 C53 10 S27 11 ----- C35 ----- FAVOURITE LIST TV 12 16 13 ----- 17 ----- ----- ----- 14 18 16 ----- 19 ----- VCR ----- DVD ----- CABLE 20 24 MENU Prev. PR Page 21 ----- 25 ----- Move Delete ----- ----- Copy Deleting 1. 2. 22 26 ----- ----- Move 23 27 Skip ----- HDSTB AUDIO ----- FAVOURITE Favourite a programme Select a programme to be deleted with the Δ Press the RED button twice. The selected programme is deleted, all the are shifted up one position. / Ε or Φ / Γ following button. programs Copying 1. 2. 3. a programme Select a programme to be copied with the Δ / Ε or Φ / Γ button. Press the GREEN button. Move the programme to the desired programme number with the FAVOURITE Δ/ΕorΦ/Γbutton. 4. Press the GREEN button again to move the programme. All the following programs are shifted down one position. Moving 1. 2. 3. a programme Select a programme to be moved with the Δ / Ε or Φ / Γ button. Press the YELLOW button. Move the programme to the desired programme number with the Δ/ΕorΦ/Γbutton. 4. Press the YELLOW button Skipping 1. 2. 3. a again to release this function. OK programme number programme number to be Select a skipped with the Δ / Ε or Φ / Γ button. Press the BLUE button. The skipped programme turns to blue. Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that you will be unable to select it using the Δ / Ε button during normal TV viewing. If you want to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu. MENU favourite programme Select your favourite programme number by pressing Δ / Ε or Φ / Γ buttons and then press the FAVOURITE button. It will automatically includes the selected programme into your favourite programs list and heart-mark will appear in back of that programme number. You can store up to 10 programs. Selecting 1. Repeatedly press the FAVOURITE button to select stored favourite programs in normal TV viewing. 13 SETUP Menu Calling the programme table You can check the programs stored in the memory the programme table. TV by displaying VCR DVD CABLE HDSTB AUDIO table Press the LIST button to display the Programme table The programme table appears on the screen. Displaying programme 1 S6 ANALOGUE 1S6 2S6 3S6 4 C9A 5 C12 6 7 8 C53 9 C53 10 16 20 24 LIST LIST OK Exit DIGITAL 0S6 12 Select ----- ----- ----- ----- 13 17 21 25 PR menu. ----- ----- ----- ----- Page 14 18 22 26 S27 ----- ----- ----- ----- ----- C35 11 ----- 16 19 23 ----- ----- ----- 27 ----- Move Note : a. You may find some blue highlighted programs shown. They have been set up in the programme edit mode. b. Some programs with the channel number shown in the programme table indicate there is no station name assigned. a programme in the programme table Select a programme with the Δ / Ε or Φ / Γ button. The set switches to the chosen programme number. Selecting a programme table 4 programme table pages in which contain 100 pro- Paging through There are grams. Pressing the Δ / Ε or Φ / Γ button repeatedly Press the LIST button to return to normal TV 14 turns the pages. viewing. PICTURE Menu PSM (Picture Status 1. 2. 3. Memory) Press the MENU button and then Δ / Ε button to select the PICTURE menu. Press the Γ button and then Δ / Ε button to select PSM. Press the Γ button and then Δ / Ε button to select a picture setting on the PSM pull-down menu. TV VCR DVD CABLE HDSTB AUDIO SETUP PSM Γ Contrast PICTURE Dynamic Standard Brightness Mild Colour Game AUDIO AUDIO Sharpness User Tint TIME Colour temp. SPECIAL SPECIAL Video preset LOCK MENU or Φ button. press the MENU button to return to normal TV 4. Press the OK 5. Repeatedly viewing. Picture You Prev. adjustment adjust picture contrast, brightness, colour intensity, sharpness and tint (NTSC AV, COMPONENT 60Hz mode only) to the levels you prefer. 1. 2. 3. can Press the MENU button TURE menu. Press the Γ button and picture item. Press the Γ button and adjustments, then it will and then Δ / Ε then Δ button to select the desired / Ε button to select the PIC- then Φ / Γ button to make appropriate be stored for the picture User. OK MENU PSM SETUP SETUP Contrast 100Φ Γ PICTURE AUDIO AUDIO TIME SPECIAL LOCK 4. 5. Press the OK button. Repeatedly press the MENU button to return to normal TV viewing. Note : The adjustment for PICTURE menu (contrast, brightness, colour, sharpness and tint) affect both the main and sub picture in PIP or Twin Picture mode. To recall your preferred setting, press the PSM button until the desired picture (Dynamic, Standard, Mild, Game or User) appears. The picture Dynamic, Standard, Mild and Game are programmed for good picture reproduction at the factory and cannot be changed. 15 PICTURE Menu Adjusting TV VCR Auto Colour Control Choose one of three automatic colour enhance hotter colours such as red, intense colours with more blue. adjustments. Set or to warm to set to cool to see less DVD CABLE HDSTB 1. AUDIO 2. Press the MENU button and then Δ / Ε button to select the PICTURE menu. Press the Γ button and then Δ / Ε button to select Colour temp.. 3. Press the Γ button and then desired colour temperature. SETUP SETUP use Δ / Ε button to select the PSM Contrast PICTURE Brightness Colour AUDIO AUDIO Sharpness Warm Tint TIME Colour temp. Γ Medium Cool SPECIAL SPECIAL Video preset LOCK LOCK MENU 4. 5. Prev. Press the OK button. Repeatedly press the MENU button to return to normal TV viewing. OK You lent MENU 1. 2. 3. can enjoy the vivid and hi-definition picture Digital Reality processor technology. with LG's excel- Press the MENU button and then Δ / Ε button to select the PICTURE menu. Press the Γ button and then Δ / Ε button to select XD. Press the Γ button and then Δ / Ε button to select On or Off on the XD pull-down menu. SETUP SETUP PSM Contrast PICTURE Brightness Colour AUDIO AUDIO Sharpness Tint TIME Colour temp. SPECIAL SPECIAL Γ Off On Video preset LOCK LOCK MENU 4. 5. Press the OK or Φ Repeatedly press viewing. Video Use to button. the MENU button to return to normal TV preset quickly reset all the tory preset values. 16 Prev. picture menu options to their original fac- AUDIO MENU SSM You (Sound Status Memory) can Movie, or equalizer, keeps on 1. 2. 3. select your preferred sound setting; Standard, Music, Speech and you can also adjust the sound frequency of balance. If you switch AVL to on, the set automatically an equal volume level even if you change programs. TV VCR DVD CABLE Press the MENU button and then Δ / Ε button to select the AUDIO menu. Press the Γ button and then Δ / Ε button to select SSM. Press the Γ button and then Δ / Ε button to select a sound setting on the SSM pull-down menu. SETUP SETUP SSM Γ HDSTB AUDIO Standard Music AVL PICTURE AUDIO Balance Movie Treble Speech Bass User TIME TIME Front surround SPECIAL SPECIAL TV speaker LOCK LOCK MENU 4. 5. Press the OK or Prev. Φ button. the MENU button to return to normal TV Repeatedly press viewing. To recall your preferred setting, press the SSM button until the desired sound (Standard, Music, Movie, Speech or User) appears. The sound Standard, Music, Movie and Speech are programmed for good sound reproduction at the factory and cannot be changed. If you press the SSM button after making appropriate on the User sub menu, the display User automatically appears even though you have already set a factory preset setting; Standard, Music, Movie or Speech. Note : adjustment AVL OK MENU SSM (Auto Volume Leveler) If you select AVL On, the set automatically level even if you change programs. keeps on an equal vol- ume 1. 2. 3. Press the MENU button and then Δ / Ε button to select the AUDIO menu. Press the Γ button and then Δ / Ε button to select AVL. Press the Γ button and then Δ / Ε button to select On or Off on the AVL pull-down menu. SETUP SETUP SSM AVL Γ Off PICTURE Balance On Treble AUDIO Bass TIME TIME Front surround SPECIAL SPECIAL TV speaker LOCK LOCK MENU 4. 5. Prev. Press the OK or Φ button. Repeatedly press viewing. the MENU button to return to normal TV 17 AUDIO MENU Adjusting Sound Control 1. TV VCR 2. DVD CABLE HDSTB 3. Press the MENU button and then Δ / Ε button to select the AUDIO menu. Press the Γ button and then use Δ / Ε button to select the desired sound item. Press the Γ button and then use Φ / Γ button to make appro- priate adjustments. AUDIO SETUP Balance 0Φ L R Γ PICTURE AUDIO TIME TIME SPECIAL SPECIAL LOCK LOCK 4. 5. Press the OK button. Repeatedly press the MENU button to return to normal TV viewing. Front surround 1. OK 2. 3. Press the MENU button and then Δ / Ε button to select the AUDIO menu. Press the Γ button and then Δ / Ε button to select Front surround. Press the Γ button and then Δ / Ε button to select Off or SRS TruSurround XT on the Front surround pull-down menu. MENU SETUP SETUP SSM AVL PICTURE Balance AUDIO Treble Bass TIME TIME Front surround SPECIAL SPECIAL TV speaker LOCK LOCK MENU 6. 7. Γ Off SRS TruSurround XT Prev. SRS TruSurround XT Takes advantage of any multi-channel format without needing to add extra speakers or equipment. Dialog clarity, bass enrichment, and the addition of stereo audio enhancement that produces an immersive sound experience from standard stereo material. Press the OK button. Repeatedly press the MENU button to return to normal TV viewing. R TruSurround XT is a trademark of SRS Labs, Inc. technology is incorporated under license from TruSurround XT SRS Labs, Inc. 18 AUDIO MENU Speaker adjustment You adjust can internal speaker status. Press the MENU button and then Δ / Ε button to select the 1. AUDIO TV menu. VCR DVD Press the Γ button and then Δ / Ε button to select TV speaker. Press the Γ button and then Δ / Ε button to select Off, Center 2. 3. or On on the TV speaker pull-down SETUP SETUP CABLE HDSTB AUDIO menu. SSM AVL PICTURE Balance AUDIO Treble Bass TIME TIME Off Front surround SPECIAL SPECIAL TV speaker Γ Center On LOCK LOCK MENU 4. Press the OK button. 5. Repeatedly viewing. Prev. press the MENU button to return to normal TV Note : a. Allows you to toggle the TV internal speakers Off, Center or On. If you want to use your external hi-fi stereo system, turn off the internal TV speakers. However, you may use the internal TV speakers as a center speaker to create a surround effect. b. In AV, RGB-PC/DTV and DVI-PC/DTV mode, internal speaker/variable audio can be output even though there is no video OK signal. MENU Sound output selection (In In AV mode, you can select Analogue mode only) output sound for the left and right loud- speakers. press the I/II button to select the sound output. Audio signal from audio L input is sent to the left loud speaker and audio signal from audio R input is sent to the right loud speaker. Audio signal from audio L input is sent to left and right loud- Repeatedly L+R : L+L : R+R speakers. Audio signal speakers. : Stereo When from audio R input reception (In Analogue is sent to left and mode right I/II loud- only) programme is selected, the sound information for the station appears after the programme number and station name disappear. Broadcast On Screen Display a Mono Stereo MONO MONO / STEREO Mono sound selection In stereo reception if the stereo signal is weak, you can switch to mono by pressing the I/II button twice. In mono reception the depth of sound is improved. To switch back to stereo, press the I/II button twice again. 19 TIME MENU SETUP SETUP Auto clock Manual clock PICTURE Off time AUDIO AUDIO TIME On time Sleep timer Auto sleep Γ SPECIAL SPECIAL Auto clock The time is automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually, if the current time is set incorrectly by the auto clock function. 1. LOCK LOCK setup 2. 3. Press the MENU button and then Δ / Ε button to select the Time menu. Press the Γ button and then Δ / Ε button to select Auto clock. Press the Γ button and then Δ / Ε button to select On. Auto clock SETUP SETUP TV VCR Γ Off Manual clock On Off time Time PICTURE PICTURE DVD NSW/ACT zone CABLE HDSTB On time AUDIO AUDIO AUDIO Sleep timer TIME Auto sleep MENU Prev. SPECIAL SPECIAL LOCK LOCK 4. Press the Γ button and then Δ / Ε button to select your viewing time zone; NSW/ACT, NT, TAS, WA, SA, QLD, or VIC. Press the OK or Φ button. Repeatedly press the MENU button to return to normal TV area 5. 6. viewing. Manual clock If current time 1. 2. OK 3. setup setting is wrong, reset the clock manually. Press the MENU button and then Δ / Ε button to select the Time menu. Press the Γ button and then Δ / Ε button to select Manual clock. Press the Γ button and then Φ / Γ button to select either the year, date, or time option. SETUP SETUP Year Auto clock MENU Manual clock Γ 2004 Date 12 : 15 Time 5 : 36 PICTURE PICTURE Off time PM On time AUDIO AUDIO Sleep timer TIME Auto sleep MENU Prev. SPECIAL SPECIAL LOCK LOCK Once selected, use the Δ / Ε button to set year, date, and time options. 4. 5. 20 Press the OK or Φ Repeatedly press viewing. button. the MENU button to return to normal TV TIME MENU Setting the On/Off time SETUP SETUP Timer function operates only if current time has been already set. Off Time function overrides on Time function if they are set to the same time. The set must be in standby mode for the On Time to work. Two hours after the set is switched on by the on time function it will automatically switch been pressed. back to standby mode unless a button has Auto clock Manual clock PICTURE PICTURE Off time AUDIO AUDIO TIME On time Sleep timer Auto sleep Γ SPECIAL SPECIAL LOCK LOCK 1. 2. 3. Press the MENU button and then Δ / Ε button to select the Time menu. Press the Γ button and then use Δ / Ε button to select Off time or On time. Press the Γ button and then use Δ / Ε button to select On. TV VCR DVD CABLE SETUP SETUP Auto clock HDSTB AUDIO Manual clock PICTURE PICTURE Off time AUDIO AUDIO On time Sleep timer TIME Γ Off On Time Auto sleep SPECIAL PR Vol 6 30 :AM ANALOGUE 0 30 LOCK MENU 4. 5. 6. 7. 8. Prev. To cancel On/Off time function, select Off. Press the Γ button and then use Δ / Ε button to adjust hour. Press the Γ button and then use Δ / Ε button to adjust minute. Only On time function; Press the Γ button and then use Δ button to adjust programme number or volume level. Press the OK or Φ button. Repeatedly press the MENU button to return to normal the the / Ε TV viewing. OK MENU 21 TIME MENU SETUP SETUP Auto clock Manual clock PICTURE Off time AUDIO AUDIO TIME On time Sleep timer Auto sleep Sleep 1. Γ SPECIAL SPECIAL timer You don't have to remember to switch the set off before you go to bed. The sleep timer automatically switches the set to standby after the preset time elapses. 2. 3. LOCK LOCK Press the MENU button and then Δ / Ε button to select the Time menu. Press the Γ button and then Δ / Ε button to select Sleep timer. Press the Γ button and then Δ / Ε button to select a timer setting on the Sleep timer pull-down menu. SETUP SETUP Off Auto clock 10 Min Manual clock PICTURE PICTURE 20 Min Off time 30 Min TV AUDIO AUDIO VCR DVD On time Sleep CABLE timer 60 Min Γ TIME HDSTB Auto 90 Min 120 Min sleep AUDIO 180 Min SPECIAL SPECIAL 240 Min LOCK LOCK MENU Prev. 4. Press the OK or Φ button. 5. Repeatedly viewing. press the MENU button to return to normal TV Press the SLEEP button to select the number of minutes. The diswill appear on the screen, followed by 10, 20, 30, 60, 90, 120, 180 and 240. The timer begins to count down from the number of minutes selected. play SLEEP Note : a. To view the remaining sleep time, press the SLEEP button once. b. To cancel the sleep time, repeatedly press the SLEEP button until the display Off appears. c. When you switch the set off, the set releases the preset sleep time. Auto sleep If there is minutes. no input signal, the set will turn off automatically after 10 OK 1. 2. MENU 3. Press the MENU button and then Δ / Ε button to select the Time menu. Press the Γ button and then Δ / Ε button to select Auto sleep. Press the Γ button and then Δ / Ε button to select On or Off. SETUP SETUP Auto clock Manual clock PICTURE PICTURE Off time AUDIO AUDIO On time Sleep timer TIME Auto sleep Γ Off On SPECIAL SPECIAL LOCK LOCK MENU 22 Prev. or Φ button. press the MENU button to return to normal TV 4. Press the OK 5. Repeatedly viewing. SPECIAL MENU Main Picture Source Selection SETUP SETUP Main Sub Inputs can be set for TV, AV, Component or RGB-PC mode. AV mode is used when a video cassette recorder (VCR), or other equipment is connected to the set. input input PICTURE PICTURE Subtitle AUDIO AUDIO Child lock ARC TIME Note : When a VCR is connected via the aerial socket the set is used in TV mode. See the 'Connection of external equipment' section. 1. 2. 3. Press the MENU button and then Δ / Ε button to select the SPECIAL menu. Press the Γ button and then Δ / Ε button to select Main input. Press the Γ button and then Δ / Ε button to select Digital, Analogue, Video 1, Video 2, Video 3, Component 1, Component 2, RGB-PC, RGB-DTV, DVI-PC or DVI-DTV. Demo SPECIAL SPECIAL Γ LOCK LOCK TV VCR DVD CABLE HDSTB SETUP SETUP Main Sub PICTURE PICTURE input input Subtitle Γ Digital AUDIO Analogue Video 1 D/A TV Video 2 AUDIO AUDIO Child lock Video 3 TV/AV ARC Component1 Demo Component2 TIME DVI-DTV LOCK LOCK MENU Video 1 1 2 3 4 56 7 89 RGB-PC SPECIAL Prev. : VCR connected to the VIDEO1 INPUT sockets of the : VCR connected to the VIDEO2 INPUT sockets of the 0 set Video 2 set 4. 5. PR VCR connected to the VIDEO3 sockets of the set Component1/2 : DVD connected to the DTV/DVD INPUT sockets on the back of set RGB-PC/DTV : PC or SET TOP box connected to the RGB INPUT sockets on the back of set DVI-PC/DTV : PC or SET TOP box connected to the DVI INPUT sockets on the back of set Press the OK or Φ button. Repeatedly press the MENU button to return to normal TV viewing. Video 3 : Alternatively you can select the TV, AV, Component, RGB-PC DVI-DTV mode by pressing the TV/AV button. or OK MENU In AV, Component, RGB-PC or DVI-DTV mode, to return to TV mode, press the PR +/- or NUMBER buttons. Press the D/A TV button to select digital or analogue mode. 23 SPECIAL MENU SETUP Main Sub input input PICTURE Subtitle 1. Subtitle AUDIO AUDIO TIME TIME Child lock 2. ARC 3. Demo (In DTV mode only) Press the MENU button and then Δ / Ε button to select the SPECIAL menu. Press the Γ button and then Δ / Ε button to select Subtitle. Press the Γ button and then Δ / Ε button to select On or Off on the Subtitle pull-down menu. SPECIAL Γ SETUP SETUP Main Sub LOCK input input PICTURE PICTURE Subtitle AUDIO AUDIO Γ Off On Child lock ARC TIME TV Demo VCR DVD SPECIAL CABLE HDSTB LOCK LOCK AUDIO Prev. MENU 4. Press the OK 5. Repeatedly viewing. You can or Φ button. the MENU button to return to normal TV press select Subtitle off with the TEXT button in DTV mode. on or Child Lock The TV can be set so that the remote control handset is needed to control it. This feature can be used to prevent unauthorized viewing. 1. 2. 3. Press the MENU button and then Δ / Ε button to select the SPECIAL menu. Press the Γ button and then Δ / Ε button to select Child lock. Press the Γ button and then Δ / Ε button to select On or Off. SETUP SETUP Main Sub input input PICTURE PICTURE Subtitle OK AUDIO AUDIO Child lock Γ Off On ARC TIME Demo MENU SPECIAL LOCK LOCK MENU Prev. or Φ 4. Press the OK 5. Repeatedly press button. the MENU button to return to normal TV viewing. With the lock on, the display Child lock On appears on the screen if any button on the front panel is pressed while viewing the TV. Note : The display Child lock On will not appear on the screen if any button on the front panel is pressed while displaying the menus. 24 SPECIAL MENU Picture format SETUP SETUP watch TV in various picture formats; Auto, 4:3, 16:9 (Wide), 14:9, Zoom and Cinema zoom. You can repeatedly press the ARC button to select your desired picture format. You can Auto 4:3 16:9 Main Sub input input PICTURE PICTURE Subtitle AUDIO AUDIO Child lock ARC TIME Demo SPECIAL SPECIAL Γ LOCK LOCK TV VCR DVD Cinema Zoom zoom 14:9 CABLE HDSTB AUDIO ARC Note: a. You are available to 4:3 and 16:9 in DVI-PC and RGB-PC mode. b. Auto: When your TV receives the wide screen signal, it will be automatically changed to the picture format to be sent. (Not available in all countries) c. You can adjust the enlarge proportion of Cinema Zoom using Δ / Ε button. The adjustment range is 1 16. ~ Demo Shows you how to 1. 2. 3. navigate the TV's on-screen menus. Press the MENU button and then Δ / Ε button to select the SPECIAL menu. Press the Γ button and then Δ / Ε button to select Demo. Press the Γ button and then Δ / Ε button to select Auto demo or XD demo on the Demo pull-down menu. OK SETUP SETUP Main Sub PICTURE PICTURE input input Subtitle AUDIO AUDIO MENU Child lock ARC TIME Demo Γ Auto demo demo SPECIAL LOCK LOCK MENU Prev. 4. Press the Γ button to start. 5. Auto demo : Use to scan the features and menu options avaiable on your TV. XD demo : Use to see the difference between XD Demo and XD Demo Off. Press the EXIT button to stop Demo. 25 LOCK MENU Lock system SETUP Set password PICTURE Block programme AUDIO AUDIO Parental guidance Aux. block Lock setup Lets you set up blocking schemes to block specific channels, ings, and external viewing sources. A password is required to gain access to this menu. rat- TIME TIME 1. SPECIAL SPECIAL LOCK Γ Press the MENU button and then Δ / Ε button to select the LOCK menu. Then, press the Γ button to enter the password as requested. Lock system SETUP SETUP Set Γ Off On password PICTURE PICTURE Block programme TV Parental AUDIO AUDIO VCR DVD guidance Aux. block CABLE TIME HDSTB AUDIO SPECIAL SPECIAL LOCK LOCK MENU Prev. The TV is set up with the initial 1 2 3 4 56 7 89 2. password "0-0-0-0". Use the Δ / Ε button to choose from the following Lock menu is selected, change the settings to options. Once the option your preference. Lock system Activates or disables the blocking scheme you set up previously. Set password Change the password by inputting a new password twice. Parental guidance (In DTV mode) Prevents children from watching certain children's TV programs, according to the ratings limit set. Aux. block Enables you to select a source to block from the external source devices you have hooked up. 0 OK MENU or Φ 4. Press the OK 5. Repeatedly press viewing. Note : If you forgot button. the MENU button to return to normal TV your remote control handset. 26 password, press '7', '7', '7', '7' on the Picture In Picture Option : PIP (Picture in Picture) displays a picture within a (PIP) Function picture. On and off TV VCR Press the PIP button to switch on the sub picture. Press EXIT button to switch it off. Each press of PIP button changes the screen display below. Note ture : When the sub picture quality might get poor. Input size is 1/2 of the main mode selection for sub DVD CABLE HDSTB AUDIO shown as the picture, pic- picture Press the PIP INPUT button to select the input mode for the sub picture. PIP Each time this button is pressed, each ture is displayed as shown below. input mode for the sub pic- Main Picture Source Available Sub Picture Source Digital signal Analogue Signal Analogue, Video1, Video2, and Video3 Digital, Video1, Video2, and Video3 Note : When the PIP function is switched on, you in the Special menu. Swapping between main and sub Press the SWAP button to exchange can also adjust OK it EXIT picture the main and sub picture. PIP PR- Note When the main swapping is available. : Programme picture is Digial, Analogue selection for sub or PIP PR+ SWAP PIP INPUT AV modes, the picture The sub picture programme selection is available when the sub picture is TV mode. Press the PIP PR +/- buttons to select a programme for the sub picture. Sub picture position change InPIPmode,presstheΔ/Ε/Φ/Γbuttontomovethesubpicture to a different location on the screen. 27 Teletext Teletext (or TOP text) is with the teletext system Teletext is TV a optional function, an can free service broadcast VCR information up-to-the-minute grams, share prices DVD CABLE HDSTB therefore only a set receive the teletext broadcast. on by most TV stations which news, and many other gives weather, television pro- topics. AUDIO The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corre- sponding page number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information. TEXT Switch on/off Press the TEXT button to switch to teletext. If TV and text picture are displayed half and half of the screen, press the TEXT button again to display text picture fully. The initial page or last page appears on the screen. Two page numbers, TV station name, date and time are OK 28 the displayed headline. The first page number indicates your selection, while the second shows the current page displayed. Press the TEXT button to switch off teletext. The previous mode on screen reappears. Teletext TOP text (option) The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. TV VCR DVD CABLE Block / group / page selection 1. With the blue button you can progress from block to block. 2. Use the yellow button to proceed to the next group with automatic overflow to the next block. 3. With the green button you can proceed to the next existing page with automatic overflow to the next group. Alternatively the Δ button can be used. 4. The red button permits to return to previous selection. Alternatively the Ε button can be used. Direct page selection HDSTB AUDIO 1 2 3 4 56 7 89 0 Corresponding to the SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER buttons in TOP mode. FASTEXT The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button. OK selection i Press the button to select the index page. You can select the pages which are colour coded along the bottom line with the same coloured buttons. Corresponding to the SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode. The Δ / Ε button can be used to select the preceding or fol- Page 1. 2. 3. 4. lowing page. 29 Teletext Special teletext functions REVEAL TV VCR Press this button to display concealed information, such as solutions of riddles or puzzles. Press this button again to remove the information from the DVD CABLE HDSTB AUDIO display. 1 2 4 56 7 89 0 3 SIZE Selects double height text. Press this button to enlarge the top half of the page. Press this button again to enlarge the bottom half of the page. Press this button again to return to the normal display. UPDATE Displays the TV picture on the screen while waiting for the teletext page. Press this button to view the updated teletext page. new HOLD Stops the automatic page change which will occur if a tele- text page consists of 2 or more sub pages. The number of OK sub pages and the sub page displayed is, usually, shown on the screen below the time. When this button is pressed the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change is inhibited. To continue press this button again. MIX Displays the teletext pages superimposed on the TV pic- ture. To switch the TV picture off press this button again. Note : When TV and text picture are displayed half and half of the screen, MIX function is not available. TIME This button has two functions: ? 30 TV programme, press this button to disthe top right hand corner of the screen. Press this button again to remove the display. b) In teletext mode, press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the RED/ GREEN or Δ / Ε or NUMBER buttons. Press this button again to exit this function. a) When viewing play the time at a Other functions EPG (Electronic Programme Guide) (In Digital mode only) This function can be used only when the EPG information is broadcasted by broadcasting companies. This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster). TV VCR DVD CABLE HDSTB AUDIO Switch on/off EPG 1. Press the GUIDE button to switch on EPG. 2. Press the GUIDE button again to switch off EPG and return to TV viewing. The Bold And The Beautiful 11 TEN Digital Mon Dec. 15 4:59PM 4:30PM~4:59PMccDD G The story of the glamerous ferrester family: ther loves, tragedies, triumphs and struggles for power in the fashion industry. TV 11 TEN NOW Digital NEXT The Bold And The Beauti... TEN News The Bold And The Beauti... TEN News GUIDE 12 TEN HD 13 TEN Digital 1 No Information No Information 14 TEN Digital 2 No Information No Information 15 TEN Digital 3 No Information No Information 16 TEN Digital 4 No Information No Information Pr. Radio Change OK More Info Select a programme Press the Δ / Ε , Φ / Γ button to select desired programme, then press the OK button to display the selected programme. The Bold And The Beautiful 11 TEN Digital Mon Dec. 15 4:59PM 4:30PM~4:59PMccDD G The story of the glamerous ferrester family: ther loves, tragedies, triumphs and struggles for power in the fashion industry. Back Color button operation RADIO programmes RED shows the TV GREEN the detail infomation or on or off 31 Connection of PC PC in socket RGB INPUT UPGRADE PORT PC/DTV COMPONENT DIGITAL AUDIO OPTICAL OUTPUT INPUT2 INPUT1 (XGA /480p /576p /720p /1080i) RGB/DVI INPUT Y DIGITAL AUDIO OPTICAL INPUT1 (L) (COMPONENT2) PB S-VIDEO AUDIO (R) DIGITAL AUDIO OPTICAL INPUT2 PR VIDEO 1 INPUT VIDEO 2 INPUT MONITOR OUT AUDIO CENTER MODE IN (DVI) VIDEO VARIABLE AUDIO OUT PC/DTV (XGA /480p /576p /720p /1080i) (L) AUDIO (R) (R) DVI INPUT (L) (L) AUDIO MONO AUDIO (R) DTV/DVD INPUT PERSONAL COMPUTER How to connect 1. To get the best picture quality, adjust the PC graphics card to 1024x768, 60Hz. 2. Use the set's RGB INPUT or DVI (Digital Visual Interface) INPUT port for video connections, depending on your PC connector. If the graphic card on the PC does not output analogue and digital RGB simultaneously, connect only one of either RGB INPUT or DVI INPUT to display the PC on the set. If the graphic card on the PC does output analogue and digital RGB simultaneously, set the TV to either RGB or DVI; (the other mode is set to Plug and Play automatically by the set.) 3. Then, make the corresponding audio connections. If using a sound card, adjust the PC sound as required. How to use 1. Switch on the PC, and the PC screen appears on the set. The set can be operated as the PC monitor. 2. Check the image on your set. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is present, change the PC mode to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. Note: a. b. c. Depending on the graphics card, DOS mode may not work if you use a DVI-I cable. Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed image may become permanently imprinted on the screen. The synchronization input form for Horizontal and Vertical frequencies is separate. Displayable Monitor Specification (RGB-PC / DVI-PC Mode) MODE Resolution EGA 640x350 31.468 70.09 640x480 31.469 59.94 640x480 37.861 72.80 640x480 37.500 75.00 800x600 35.156 56.25 800x600 37.879 60.31 800x600 48.077 72.18 800x600 46.875 75.00 1024x768 48.363 60.00 1024x768 56.476 70.06 1024x768 60.023 75.02 Horizontal Frequency(KHz) VGA Vertical Frequency(Hz) SVGA XGA 32 Connection of PC RGB-PC / DVI-PC Mode (option) SETUP SETUP Main Sub 1. 2. 3. 4. Press the MENU button and then Δ / Ε button to select the SPECIAL menu. Press the Γ button and then Δ / Ε button to select Main input. Press the Γ button and then Δ / Ε button to select RGB-PC or DVI-PC Press the EXIT button to return to normal viewing. POSITION input input PICTURE PICTURE Subtitle AUDIO AUDIO Child lock ARC TIME Demo SPECIAL SPECIAL Γ LOCK LOCK Γ SIZE Δ Γ Φ Ε PHASE TV VCR RESET DVD CABLE MENU Δ Ε Close Move HDSTB OK AUDIO 5. 6. Press the OK button and then Δ / Ε button to select the desired picture item. Press the Φ / Γ or Δ / Ε button to make appropriate adjustments. Position This function is to adjust picture to left/right and up/down as you prefer. Size This function is to you adjust picture size to enlarges or reduces as prefer. Phase This function allows you to remove any horizontal noise and clear or sharpen the image of characters. Note : Some signal from some graphics boards may not function properly. If the results are unsatisfactory, adjust your monitor's position, size and phase manually. Reset This function allows you to return to the good picture reproduction programmed at the factory and cannot be changed. 7. Press the OK button to store it for the PC monitor OK MENU EXIT picture. 33 Connection of external You can connect additional equipment equipment, such as VCRs, camcorders etc. to your set. Here shown may be somewhat different from your set. RGB INPUT UPGRADE PORT PC/DTV (XGA /480p /576p /720p /1080i) COMPONENT DIGITAL AUDIO OPTICAL OUTPUT INPUT2 INPUT1 Aerial socket RGB/DVI INPUT Y DIGITAL AUDIO OPTICAL INPUT1 (L) (COMPONENT2) PB S-VIDEO AUDIO (R) VIDEO 1 INPUT DIGITAL AUDIO PR OPTICAL INPUT2 VIDEO 2 INPUT 1. MONITOR OUT AUDIO CENTER MODE IN (DVI) VIDEO VARIABLE AUDIO OUT PC/DTV (XGA /480p /576p /720p /1080i) (L) (L) (L) AUDIO MONO AUDIO (R) AUDIO (R) (R) DVI INPUT DTV/DVD INPUT 2. 3. VCR 4. 5. Connect the RF out socket of the VCR to the aerial socket on the back of the set. Connect the aerial cable to the RF aerial in socket of the VCR. Store the VCR channel on a desired programme number using the 'Manual programme tuning' section. Select the programme number where the VCR channel is stored. Press the PLAY button on the VCR. Audio/Video RGB INPUT UPGRADE PORT input sockets (option) PC/DTV (XGA /480p /576p /720p /1080i) COMPONENT DIGITAL AUDIO OPTICAL OUTPUT INPUT2 INPUT1 1. RGB/DVI INPUT Y DIGITAL AUDIO OPTICAL INPUT1 (L) (COMPONENT2) PB S-VIDEO AUDIO (R) DIGITAL AUDIO OPTICAL INPUT2 PR VIDEO 1 INPUT VIDEO 2 INPUT MONITOR OUT AUDIO CENTER MODE IN (DVI) VIDEO VARIABLE AUDIO OUT PC/DTV (XGA /480p /576p /720p /1080i) (L) (L) (L) AUDIO MONO AUDIO (R) AUDIO 3. (R) (R) DVI INPUT 2. DTV/DVD INPUT Connect the audio/video out sockets of the VCR to audio/video in sockets of the set. Press the TV/AV button to select Video1, Video2 or Video3. Press the PLAY button on the VCR. The VCR playback picture appears on the screen. Note : If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO socket of the set. VCR S-Video / Audio PC/DTV (XGA /480p /576p /720p /1080i) COMPONENT DIGITAL AUDIO OPTICAL OUTPUT INPUT2 INPUT1 1. (L) (COMPONENT2) PB S-VIDEO AUDIO (R) PR VIDEO 1 INPUT VIDEO 2 INPUT MONITOR OUT AUDIO CENTER MODE IN (DVI) VIDEO VARIABLE AUDIO OUT PC/DTV (XGA /480p /576p /720p /1080i) (L) (L) (L) AUDIO MONO AUDIO AUDIO (R) 2. (R) (R) DVI INPUT (option) picture qual- RGB/DVI INPUT Y DIGITAL AUDIO OPTICAL INPUT1 DIGITAL AUDIO OPTICAL INPUT2 sockets When connecting an VCR to the S-VIDEO socket, the ity will be further improved. RGB INPUT UPGRADE PORT input DTV/DVD INPUT 3. Connect the S-video socket of the VCR to the S-VIDEO socket of the set. Connect the audio cable from the VCR to the AUDIO sockets of the VIDEO2 INPUT or VIDEO3. Select Video2 or Video3 by pressing the TV/AV button repeatedly. VCR 4. Press the PLAY button on the VCR. The VCR playback picture appears on the screen. Note : If both S-VIDEO and VIDEO sockets have been connected to the VCR simultaneously, only the S-VIDEO can be received. RGB INPUT UPGRADE PORT PC/DTV COMPONENT DIGITAL AUDIO OPTICAL OUTPUT INPUT2 INPUT1 Y DIGITAL AUDIO OPTICAL INPUT1 Monitor RGB/DVI INPUT PB PR (DVI) S-VIDEO AUDIO (R) VIDEO 1 VIDEO 2 MONITOR INPUT INPUT OUT AUDIO CENTER MODE IN V DEO VARIABLE AUDIO OUT PC/DTV (XGA /480p /576p /720p /1080i) (L) AUDIO (R) (L) (L) AUDIO (R) DVI INPUT MONO AUDIO (R) DTV/DVD INPUT Second TV 34 output sockets (L) (COMPONENT2) DIGITAL AUDIO OPTICAL INPUT2 (XGA /480p /576p /720p /1080i) Connect the audio/video in sockets of the other TV MONITOR OUTPUT sockets of the set. or monitor to Connection of external DVD 1. 2. 3. 2. 3. input 1. PC/DTV (XGA /480p /576p /720p /1080i) COMPONENT DIGITAL AUDIO OPTICAL OUTPUT INPUT2 INPUT1 RGB/DVI INPUT Y DIGITAL AUDIO OPTICAL INPUT1 (L) (COMPONENT2) PB S-VIDEO AUDIO (R) DIGITAL AUDIO OPTICAL INPUT2 PR VIDEO 1 INPUT VIDEO 2 INPUT MONITOR OUT AUDIO CENTER MODE IN (DVI) VIDE O VARIABLE AUDIO OUT PC/DTV (XGA /480p /576p /720p /1080i) (L) (L) (L) AUDIO MONO AUDIO (R) AUDIO (R) (R) DVI INPUT DTV/DVD INPUT player. on the screen. DVD sockets Connect the SET TOP output sockets to the DTV/DVD INPUT sockets (Y PB PR) of the set. (or, connect the HD-SET TOP with the D-Sub output socket to PC/DTV INPUT socket on the set and audio cable of the HD-SET TOP to the AUDIO sockets of PC/DTV INPUT.) Connect the audio cable from the SET TOP to the DTV/DVD INPUT AUDIO sockets of the set. Press the TV/AV or MULTIMEDIA button to select Component1, Component2 or RGB-DTV. Position / Phase / Reset adjustment You can adjust horizontal/vertical position, prefer in RGB-DTV mode. 2. RGB INPUT UPGRADE PORT Component2. Press the PLAY button on the DVD The DVD playback picture appears DTV 1. sockets Connect the DVD output sockets (Y Cb Cr, Y Pb Pr, Y B-Y R-Y or Y PB PR) of the DVD player to the DTV/DVD INPUT sockets (Y PB PR) of the set. Connect the audio cable from the DVD player to DTV/DVD INPUT AUDIO sockets of the set. Press the TV/AV or MULTIMEDIA button to select Component1 or 4. input equipment RGB INPUT UPGRADE PORT PC/DTV (XGA /480p /576p /720p /1080i) COMPONENT DIGITAL AUDIO OPTICAL OUTPUT INPUT2 INPUT1 RGB/DVI INPUT Y DIGITAL AUDIO OPTICAL INPUT1 (L) (COMPONENT2) PB S-VIDEO AUDIO (R) DIGITAL AUDIO OPTICAL INPUT2 PR VIDEO 1 INPUT VIDEO 2 INPUT MONITOR OUT AUDIO CENTER MODE IN (DVI) VIDEO VARIABLE AUDIO OUT PC/DTV (XGA /480p /576p /720p /1080i) (L) (L) (L) AUD O MONO AUDIO AUDIO (R) (R) (R) DVI INPUT DTV/DVD INPUT SET TOP Box phase or reset as you Press the OK button in RGB-DTV mode. Press the Δ / Ε button to select POSITION, PHASE or RESET. RGB INPUT UPGRADE PORT PC/DTV POSITION Γ COMPONENT DIGITAL AUDIO OPTICAL OUTPUT INPUT2 INPUT1 Y DIGITAL AUDIO OPTICAL INPUT1 (L) (COMPONENT2) PB SIZE Δ PR (DVI) Γ VIDEO 1 INPUT VIDEO 2 INPUT MONITOR OUT AUDIO CENTER MODE IN VIDEO VARIABLE AUDIO OUT PC/DTV PHASE S-VIDEO AUDIO (R) DIGITAL AUDIO OPTICAL INPUT2 Φ (XGA /480p /576p /720p /1080i) RGB/DVI INPUT Ε (XGA /480p /576p /720p /1080i) DVI INPUT (L) AUDIO (R) (L) (L) MONO AUDIO (R) AUDIO (R) DTV/DVD INPUT RESET MENU 3. Close Δ Ε Move OK Press the Δ / Ε or Φ / Γ button to make SET TOP Box appropriate adjust- ments. 4. Repeatedly press viewing. the MENU button to return to normal TV 35 Troubleshooting check list Symptoms No picture, no sound Sound OK, poor picture Picture OK, poor sound Picture blurred Lines or streaks in Poor picture reception on some channels No colour Poor colour Remote control does not work Poor brightness Strange sound from inside the monitor Check these items and try to adjust these The mains plug-(plugged in and switched on) Is the TV switched on? Try another channel (weak signal) Check aerial (plugged into Check aerial (broken lead?) TV?) Check aerial Check for local interference Adjust contrast Adjust brightness Adjust colour Adjust volume Check the batteries in remote control Check Audio/Video sockets Contact LG service A (VCR only) provider(s) in ambient humidity or temperamay result in an unusual noise at the time of switching off or on of the monitor and does not indicate a fault with the monitor change ture
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project