LG | DT-62SZ71DB | LG DT-62SZ71DB Owner’s Manual

DLP
PROJECTION TV
OWNER'S MANUAL
Please read this manual
carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
information to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828VA0485A
(MB04EA,
116X TX,
and quote this
require service.
cover
486-395C)
b
Contents
Installation
3
Location and function of controls
Remote control handset / Battery installation
Front panel / Rear panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Mute function
8
On
9
screen menus
Menu selection
SETUP menu
Auto programme tuning
Manual programme tuning
Booster (option) / Fine Tuning
10
PICTURE
15
Digital signal strength (In Digital mode only)
Programme edit / Calling the programme table
menu
PSM(Picture Status Memory)
Picture adjustment / Adjusting
/ Video
Auto Colour Control
preset
AUDIO menu
SSM (Sound Status Memory)
AVL (Auto Volume Leveler)
Adjusting Sound Control
Front surround / Speaker adjustment
Sound output selection (In Analogue mode
Stereo reception (In Analogue mode only)
TIME menu
Auto clock setup / Manual clock setup
Setting the On/Off time / Sleep timer / Auto
only)
20
sleep
SPECIAL menu
Main Picture Source Selection
Subtitle (In Digital mode only) / Child Lock
Picture format / Demo
23
LOCK menu
Lock setup
26
Picture in picture (PIP) function
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture
Sub picture position change
27
Teletext
Switch on/off / TOP text (option)
FASTEXT / Special teletext functions
28
Other functions
EPG (Electronic
31
Programme Guide)
Connection of PC
PC in socket / RGB-PC / DVI-PC Mode
32
(option)
Connection of external equipment
Aerial socket / Audio/Video input sockets
S-Video/Audio input sockets (option)
Monitor output sockets
DVD input sockets / DTV input sockets
Troubleshooting
2
17
check list
34
(option)
Installation
Power
This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs.
Warning
To prevent fire
moisture.
or
shock
hazard, do
not expose the set to rain or
Service
Never
remove
the back cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
high voltage
properly, unplug it
very
Aerial
Connect the aerial cable to the socket marked +75 Ω on the back
cover. For the best reception an outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
set is placed in a position to allow a free flow of air. Do not cover
the ventilation openings on the back cover.
Avoid having a fixed image remain on the screen for a
of time. Typically a frozen still picture from a VCR, 4:3
mat or if a CH label is present;
the fixed image may remain visible on the screen.
long period
picture for-
DVB is
a
registered
trademark of the DVB
Project
3
Location and function of controls
All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.
Remote control handset
TV
VCR
DVD
Before you use the remote control handset,
teries. See the next page.
CABLE
HDSTB
AUDIO
1.
D/A TV
MODE
TV/AV
MULTIMEDIA
POWER
1
23
4
789
TEXT
5
MUTE
6
MULTIMEDIA
selects Component
DVI-PC modes.
NUMBER BUTTONS
switches the set on from
5.
SLEEP
sets the
INFO
LIST
GUIDE
PIP
7.
9
10
8.
OK
MENU
14
directly
select
on or
SSM
PLAY
PAUSE
STOP
VOL +/- (Volume Up/Down)
Increases/decreases sound level.
PR +/- (Programme Up/Down)
selects a programme.
INFO
information
on
top of the
screen
during watching
GUIDE
shows a programme schedule.
REW
FF
10. LIST
displays
RECORD
the programme table.
11. OK
accepts your selection
SIZE
TIME
REVEAL
SWAP
STILL
?
MIX
or
displays
the current mode.
Δ/ΕorΦ/Γ
SKIP
PIP PR+
UPDATE
number.
off.
adjusts
menu
settings.
selects
menu
item.
PIP INPUT
I/II
INDEX
12. MENU
selects
a menu.
13. PSM (Picture Status
recalls your preferred
Memory)
picture setting.
14. VCR BUTTONS
control
a
LG video cassette recorder.
15. MODE
selects another device.
16. POWER
switches the set
17. ARC
on
Ratio
from
standby
Control)
(Aspect
changes the picture format.
4
a
EXIT
PSM
PIP PR-
or
or
timer.
MUTE
switches the sound
displays
9.
12
13
sleep
standby
DVI-DTV
PR
6.
11
1/2, RGB-DTV, RGB-PC,
4.
FAVOURITE
VOL
7
8
3.
0
install the bat-
mode.
TV/AV
selects the remote operating mode.
switches the set on from standby.
456
SLEEP
digital
or
2.
ARC
123
D/A TV
selects analogue
please
or
off to
standby.
the TV.
Location and function of controls
18. TELETEXT BUTTONS
These buttons are used for teletext.
For further details, see the 'Teletext' section.
switches the subtitle on or off in Digital mode.
TV
19. FAVOURITE
selects a favourite programme.
VCR
DVD
CABLE
HDSTB
20. PIP BUTTONS
PIP
switches the sub picture on or off.
PR +/selects a programme for the sub picture.
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
AUDIO
15
D/A TV
MODE
TV/AV
MULTIMEDIA
on-screen
displays
and returns to TV
viewing
from any
1
2
3
4
5
6
7
8
9
SLEEP
TEXT
18
0
menu.
22. SSM (Sound Status Memory)
recalls your preferred sound setting.
23. I/II
selects the language during dual
selects the sound output.
changes the audio mode (MPEG
24. STILL
freezes motion of the
MUTE
language
broadcast.
FAVOURITE
VOL
PR
INFO
LIST
19
GUIDE
or
AC3)
16
ARC
17
21. EXIT
Clears all
POWER
in
Digital
PIP
20
mode.
picture.
OK
In teletext mode, the PIP PR +/-, SWAP and PIP INPUT buttons are used for teletext function.
Note
:
Battery
MENU
installation
The remote control handset is powered by two AA type batteries. To
load the batteries, turn the remote control handset over and open
the battery compartment. Install two batteries as indicated by the
polarity symbols ( + and ) marked inside the compartment.
-
EXIT
PSM
SSM
PLAY
PAUSE
STOP
REW
FF
PIP PR-
SIZE
TIME
REVEAL
RECORD
SKIP
PIP PR+
UPDATE
21
22
SWAP
STILL
PIP INPUT
I/II
23
?
MIX
INDEX
24
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
5
Location and function of controls
Front
panel
Lamp indicator, temperature indicator, and operation indicator, located side the front panel
operating status of the DLP (Digital Light Processing) projection TV.
controls
reveal the
1
2
TV/AV
MENU
OK
VOL
345
1.
VOL
6
MAIN POWER (ON/OFF)
switches the set on or off.
PR
PR
8
7
7.
Δ / Ε
910
(Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
2.
REMOTE CONTROL SENSOR
3.
TV/AV
selects the remote operating mode.
switches the set on from standby.
8.
OPERATION INDICATOR
(Refer
9.
LAMP INDICATOR
to
(Refer
MENU
selects
a menu.
OK
accepts your selection
or
displays
mode.
6.
6
(Refer
to
p.7)
faint white trace on the
to the position.
This is normal and is a characteristic of the
Note
:
There
might
be
center of the screen
5.
p.7)
p.7)
10. TEMPERATURE INDICATOR
4.
to
Φ / Γ (Volume Down/Up)
adjusts the volume.
adjusts menu settings.
the current
screen.
a
according
Location and function of controls
Rear
panel
(R)
AUDIO
VIDEO3 INPUT
SOCKET
(L)/
MONO
VIDEO
S-VIDEO
S-VIDEO INPUT
SOCKET
VIDEO3
PRADPRT
RGB INPUT
PC/DTV
COMPONENT
DIGITALAUDIO
OPTICAOUPUT
INPU T2 INPUT1
Y
(XGA
480p
720p
1080i)
RGB/DVIINPUT
D GITALAUDIO
OPTICALNPUT1
(COMPNNT2)
SVIDEO
PB
DIGITALAUDIO
OPTICALNPUT2
PR
AUDO
CENTER
MODEIN
DVI)
(XGA
/480p
/720p
/1080i)
DVI
A/V1
INPUT
A/V2
INPUT
MONTOR
OUT
VIDEO
VARABLE
AUDIOOUT
PCDTV
(L)
(L)
(L)
MONO
AUDIO
(R)
DVD
AUDIO
(R)
INPUT
RGB INPUT SOCKETS
AERIAL
SOCKET
UPGRADE PORT
This
upgrade
port is used
the software
debug
the hardware.
without
use
INPUT2
OPTICAL OUTPUT
INPUT1
(COMPONENT2)
OUT(AUDIO/VIDEO),
(R)
PR
VIDEO1/2 / MONITOR
S-VIDEO
AUDIO
DIGITAL AUDIO
OPTICAL INPUT2
VIDEO 1
VIDEO 2
MONITOR
INPUT
INPUT
OUT
S-VIDEO INPUT
SOCKETS
AUDIO
CENTER
MODE IN
(DVI)
a
appropriate
input port.
(L)
OPTICAL INPUT1
connector from
PC to the
RGB/DVI INPUT
Y
DIGITAL AUDIO
DIGITAL AUDIO OPTICAL OUTPUT/
DIGITAL AUDIO OPTICAL INPUT1 (COMPONENT2)/DIGITAL AUDIO
OPTICAL INPUT2 (DVI)
digital
output
this
contact your
service centre.
PB
Connect
Connect the monitor
(XGA
/480p
/576p
/720p
/1080i)
COMPONENT
DIGITAL AUDIO
port. Just
or
RGB/DVI INPUT
PC/DTV
ver-
sion and
dealer
RGB INPUT
to
changing
Be careful not to
UPGRADE PORT
VIDEO
VARIABLE
AUDIO OUT
PC/DTV
(XGA
/480p
/576p
/720p
/1080i)
audio from
(L)
AUDIO
MONO
AUDIO
(R)
AUDIO
(R)
(R)
types of equipment.
Note: In standby mode,
these ports will not work.
VARIABLE AUDIO
OUT SOCKETS
(L)
(L)
various
?Status
DVI INPUT
DTV/DVD INPUT
SOCKETS
DTV/DVD INPUT
Indicators
Operation
Lamp
Indicator
Off
Power cord is not connected.
Red
Power Cord is connected, unit is
Green
On
Orange (flashing)
Orange
Preparing operation
Indicator
needs to be
Green
Temperature
Indicator
Projection lamp
(flashing)
The
lamp
is
in
cover
with
the end of its life and
a new
lamp.
is not closed.
Orange
The set is
Red
The set has shut down due to
Red
The set has shut down, check the
(flashing)
standby.
standby.
reaching
replaced
on
overheating.
overheating.
cooling
fan.
7
Basic
Operation
On and off
1.
TV
VCR
DVD
CABLE
HDSTB
2.
AUDIO
D/A TV
POWER
TV/AV
MULTIMEDIA
1
2
4
56
7
89
3.
PR+/-, TV/AV, MULTIMEDIA or NUMBER button on the remote
control handset to turn it on fully. The LED will blink orange for
a while and then lit up green when the power is successfully on.
To turn the set off, press the power button on the remote control handset. The set reverts to the stand-by mode.
3
Note :
a.
The lamp cooling fan will continue to spin for approximately 120
seconds after the power is turned off by the remote control
handset.
b. Normally, don't push off the main power switch. Instead, use the
remote control to turn the power off.
c.
When the set is turned on again immediately after turning off, it
takes around 30 to 50 seconds for sufficient cooling.
d.
When the power is switched off using the main power switch on
the set, the internal cooling system also stops operating.
Therefore, power-on by main power switch takes around 30 to
50 seconds for sufficient cooling.
e.
Forced Power-Off : When the set decides itself that the circumstance is not proper for operation, the set will goes to the standby mode automatically. Please retry to turn on the set after a
short period of time.
f.
When the set is switched on, there might be a strange sound
from the set.
0
MUTE
VOL
Before turning the set on, be sure that the main power switch
the set is pushed on.
When the main switch is pushed on, the LED will be lit up red.
This mode is Stand-by.
If the set is in stand-by mode, press the POWER, D/A TV,
on
PR
OK
MENU
SSM
Programme
selection
You can select
buttons.
a
programme number with the PR+/-
or
NUMBER
SWAP
I/II
Volume
adjustment
Press the VOL+/- button to
adjust
the volume.
Mute function
Press the MUTE button. The sound is switched off and the
display
Mute
appears.
You can cancel it
8
by pressing
the MUTE, VOL+/-, SSM, I/II button.
On Screen Menus
The
dialogue between you and your set takes place
required for the operating steps are also displayed.
on screen
with
an
operator
menu.
The buttons
Menu selection
1.
Press the MENU button and then Δ / Ε button to
2.
Press the Γ button and then the Δ / Ε button to select
3.
Repeatedly press
SETUP
SETUP
Γ
display
each
the MENU button to return to normal TV
Auto programme
viewing.
SETUP
SETUP
PSM
Manual programme
PICTURE
PICTURE
PICTURE Γ
Programme edit
AUDIO
Signal strength
AUDIO
Booster
TIME
TIME
menu.
item.
a menu
TIME
Contrast
100
Brightness
60
Colour
60
Sharpness
75
Tint
0
R
G
Colour temp.
SPECIAL
SPECIAL
SPECIAL
SPECIAL
LOCK
LOCK
LOCK
LOCK
SETUP
Set
PICTURE
menu
SETUP
SETUP
Lock system
SETUP
Video preset
SSM
password
AVL
PICTURE
PICTURE
PICTURE
Block programme
AUDIO
Parental
guidance
AUDIO
AUDIO Γ
Aux. block
TIME
TIME
TIME
SPECIAL
SPECIAL
SPECIAL
SPECIAL
LOCK
menu
Balance
0
Treble
50
Bass
50
L
R
Front surround
LOCK
Main
Sub
AUDIO
menu
SETUP
SETUP
input
Manual clock
PICTURE
PICTURE
Subtitle
Off time
Child lock
AUDIO
AUDIO
ARC
TIME
TIME
menu
Auto clock
input
PICTURE
AUDIO
speaker
LOCK
LOCK
Γ
SETUP
TV
TIME
Demo
SPECIAL
SPECIAL
LOCK
LOCK
LOCK
LOCK
menu
Sleep
timer
Auto
sleep
Γ
SPECIAL Γ
SPECIAL
On time
TIME
menu
9
SETUP Menu
SETUP
SETUP
Γ
Auto programme
Manual programme
PICTURE
Programme edit
AUDIO
AUDIO
Up to 100 TV stations can be stored in this set by programme numbers
(0 to 99). Once you have preset the stations, you will be able to use the
Δ / Ε or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Signal strength
Auto programme
Booster
TIME
TIME
tuning
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
SPECIAL
SPECIAL
1.
LOCK
LOCK
2.
Press the MENU button and then Δ / Ε button to select the
SETUP menu.
Press the Γ button and then Δ / Ε button to select Auto pro-
gramme.
SETUP
SETUP
TV
VCR
Auto programme Γ
Storage from
Manual programme
To start
50
PICTURE
PICTURE
DVD
Programme edit
CABLE
HDSTB
AUDIO
AUDIO
AUDIO
Signal strength
Booster
TIME
SPECIAL
SPECIAL
LOCK
1
4
2
MENU
3
56
3.
Prev.
Press the Γ button to select
Storage from. Select the beginprogramme number with the Δ / Ε button or NUMBER
buttons on the Storage from menu.
Press the Γ button to select To start.
Press the Γ button to begin auto programming.
ning
7
89
4.
0
5.
SETUP
SETUP
Auto programme
Storage from
Manual programme
To start
50
Γ
PICTURE
PICTURE
Programme edit
AUDIO
AUDIO
Processing
Auto programme...
Signal strength
3%
Booster
1 channel found
TIME
Press
digital
SPECIAL
SPECIAL
OK
(OK)
to start
programme
scan.
LOCK
M
MENU
All receivable stations
are
Prev.
stored.
Option: In Australia, if no station name can be assigned
station, the channel number is assigned and stored as
MENU
to a
folstation name' section to
-----
lowed
assign
6.
number see
by
the station name.
a
'Assigning
a
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme Edit' section
to edit the stored programme.
Repeatedly Press the MENU button to return to normal TV
viewing.
Note :
a.
To
begine auto programming or
4-digit password in Lock system
b.
10
manual programming, input a
on. Be sure to remember this
number!
If you forgot your password, press '7', '7', '7', '7'
control handset.
on
the remote
SETUP Menu
Manual programme
tuning
SETUP
SETUP
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
Γ
Auto programme
Manual programme
PICTURE
PICTURE
Programme edit
AUDIO
AUDIO
Signal strength
Booster
TIME
1.
2.
Press the MENU button and then Δ / Ε button to select the
SETUP menu.
Press the Γ button and then Δ / Ε button to select Manual
SPECIAL
SPECIAL
LOCK
LOCK
programme.
SETUP
SETUP
Auto programme
Band
Manual programmeΓ
Channel
Programme edit
Search
Up/Down
Signal strength
Fine
Up/Down
Booster
Name
V/UHF
47
PICTURE
PICTURE
AUDIO
AUDIO
TV
VCR
DVD
CABLE
TIME
Storage
C5
HDSTB
AUDIO
10
SPECIAL
SPECIAL
LOCK
LOCK
MENU
3.
4.
5.
6.
7.
8.
9.
Prev.
Press the Γ button to select Band. Press the Δ / Ε button to
select V/UHF or Cable as required.
Press the Γ button to select Channel. Select the desired channel number with the Δ / Ε button.
Press the Γ button to select Search. Press the Δ / Ε button to
commence searching. If a station is found the search will stop.
If this station is the one required, press the Φ / Γ button to select
Storage. Select the desired programme number with the Δ / Ε
button.
Press the OK button to store it.
To store another station, repeat steps 3 to 8.
Repeatedly press the MENU button to return to normal TV
1
2
3
4
56
7
89
0
viewing.
Assigning a station name
1. Repeat the 'Manual programme tuning' steps
2.
3.
4.
5.
6.
OK
1 to 2.
Press the Γ button to select Name.
Press the Δ button. You can use a blank, +, -, the numeric 0 to
9 and the alphabet A to Z.
With the Ε button you can select in the opposite direction.
Select the next position by pressing the Γ button and then take
your choice of the second character, and so on.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
MENU
viewing.
11
SETUP Menu
SETUP
SETUP
Γ
Auto programme
Manual programme
PICTURE
Programme edit
AUDIO
AUDIO
Signal strength
Booster
TIME
TIME
Booster
If the reception is poor at the fringed area of TV signal, select
Booster to On. When the picture condition is good, do not select
Booster to On.
1.
2.
3.
SPECIAL
SPECIAL
(option)
LOCK
LOCK
4.
Press the MENU button and then Δ / Ε button to select the
SETUP menu.
Press the Γ button and then Δ / Ε button to select Booster.
Press the Γ button and then Δ / Ε button to select On or Off
on the Booster pull-down menu.
Repeatedly press the MENU button to return to normal TV
viewing.
TV
VCR
Fine
tuning
DVD
CABLE
HDSTB
AUDIO
Normally
1.
2.
3.
fine
tuning
is
only necessary
if
is poor.
reception
the 'Manual programme tuning' steps 1 to 2.
Press the Γ button to select Fine.
Press the Δ / Ε button to fine tune for the best picture and
sound.
Repeat
SETUP
SETUP
Auto programme
Band
Manual programme
Channel
Programme edit
Search
Signal strength
Fine
Up/Down
Name
BLN 2
V/UHF
47
PICTURE
AUDIO
Up/Down
TIME
TIME
Storage
10
SPECIAL
SPECIAL
LOCK
LOCK
MENU
4.
5.
Prev.
Store
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
The finely tuned programme will
during programme selection.
be indicated
by yellow
number
OK
Digital signal strength (In Digital
MENU
mode
only)
Reveals how strong your DTV signal is and whether you need to
adjust your antenna.
The higher the signal strength, the less likely you are to experience
picture degradation.
Digital DTV Signals; May
broadcast
1.
2.
on
not be available in all areas, nor are
all programs.
Press the MENU button and then Δ / Ε button to select the
SETUP menu.
Press the Γ button and then Δ / Ε button to select Signal
strength.
View the on-screen signal
the signal being received.
12
strength
monitor to
see
the
quality
of
SETUP Menu
Programme
edit
SETUP
SETUP
This function enables you to delete or skip the stored programs.
Also you can move some stations to other programme numbers or
copy a blank station data into the selected programme number.
1.
2.
3.
Press the MENU button and then Δ / Ε button to select the
SETUP menu.
Press the Γ button and then Δ
button to select
/ Ε
Programme edit.
Press the Γ button to display the Programme edit menu.
Γ
Auto programme
Manual programme
PICTURE
PICTURE
Programme edit
AUDIO
AUDIO
Signal strength
Booster
TIME
SPECIAL
SPECIAL
LOCK
LOCK
0
S6
ANALOGUE
DIGITAL
0S6
1S6
2S6
3S6
4
C9A
5
C12
6
7
8
C53
9
C53
10
S27
11
-----
C35
-----
FAVOURITE LIST
TV
12
16
13
-----
17
-----
-----
-----
14
18
16
-----
19
-----
VCR
-----
DVD
-----
CABLE
20
24
MENU Prev.
PR
Page
21
-----
25
-----
Move
Delete
-----
-----
Copy
Deleting
1.
2.
22
26
-----
-----
Move
23
27
Skip
-----
HDSTB
AUDIO
-----
FAVOURITE Favourite
a programme
Select a programme to be deleted with the Δ
Press the RED button twice.
The selected programme is deleted, all the
are shifted up one position.
/ Ε or Φ / Γ
following
button.
programs
Copying
1.
2.
3.
a programme
Select a programme to be copied with the Δ / Ε or Φ / Γ button.
Press the GREEN button.
Move the programme to the desired programme number with the
FAVOURITE
Δ/ΕorΦ/Γbutton.
4.
Press the GREEN button again to move the programme.
All the following programs are shifted down one position.
Moving
1.
2.
3.
a programme
Select a programme to be moved with the Δ / Ε or Φ / Γ button.
Press the YELLOW button.
Move the programme to the desired programme number with the
Δ/ΕorΦ/Γbutton.
4.
Press the YELLOW button
Skipping
1.
2.
3.
a
again
to release this function.
OK
programme number
programme number to be
Select a
skipped with the Δ / Ε or Φ / Γ
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped programme.
When a programme number is skipped it means that you will be
unable to select it using the Δ / Ε button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
MENU
favourite programme
Select your favourite programme number by pressing Δ / Ε or Φ /
Γ buttons and then press the FAVOURITE button.
It will automatically includes the selected programme into your
favourite programs list and heart-mark will appear in back of that
programme number. You can store up to 10 programs.
Selecting
1.
Repeatedly press the FAVOURITE button to select stored favourite
programs in normal TV viewing.
13
SETUP Menu
Calling
the programme table
You can check the programs stored in the memory
the programme table.
TV
by displaying
VCR
DVD
CABLE
HDSTB
AUDIO
table
Press the LIST button to display the Programme table
The programme table appears on the screen.
Displaying programme
1
S6
ANALOGUE
1S6
2S6
3S6
4
C9A
5
C12
6
7
8
C53
9
C53
10
16
20
24
LIST
LIST
OK
Exit
DIGITAL
0S6
12
Select
-----
-----
-----
-----
13
17
21
25
PR
menu.
-----
-----
-----
-----
Page
14
18
22
26
S27
-----
-----
-----
-----
-----
C35
11
-----
16
19
23
-----
-----
-----
27
-----
Move
Note :
a.
You may find some blue highlighted programs shown. They
have been set up in the programme edit mode.
b. Some programs with the channel number shown in the programme table indicate there is no station name assigned.
a programme in the programme table
Select a programme with the Δ / Ε or Φ / Γ button.
The set switches to the chosen programme number.
Selecting
a programme table
4 programme table pages in which contain 100 pro-
Paging through
There
are
grams.
Pressing
the Δ
/ Ε or Φ / Γ
button
repeatedly
Press the LIST button to return to normal TV
14
turns the pages.
viewing.
PICTURE Menu
PSM (Picture Status
1.
2.
3.
Memory)
Press the MENU button and then Δ / Ε button to select the PICTURE menu.
Press the Γ button and then Δ / Ε button to select PSM.
Press the Γ button and then Δ / Ε button to select a picture setting on the PSM pull-down menu.
TV
VCR
DVD
CABLE
HDSTB
AUDIO
SETUP
PSM
Γ
Contrast
PICTURE
Dynamic
Standard
Brightness
Mild
Colour
Game
AUDIO
AUDIO
Sharpness
User
Tint
TIME
Colour temp.
SPECIAL
SPECIAL
Video preset
LOCK
MENU
or Φ button.
press the MENU button to return to normal TV
4.
Press the OK
5.
Repeatedly
viewing.
Picture
You
Prev.
adjustment
adjust picture contrast, brightness, colour intensity, sharpness and tint (NTSC AV, COMPONENT 60Hz mode only) to the
levels you prefer.
1.
2.
3.
can
Press the MENU button
TURE menu.
Press the Γ button and
picture item.
Press the Γ button and
adjustments, then it will
and then Δ
/ Ε
then Δ
button to select the desired
/ Ε
button to select the PIC-
then Φ / Γ button to make appropriate
be stored for the picture User.
OK
MENU
PSM
SETUP
SETUP
Contrast
100Φ
Γ
PICTURE
AUDIO
AUDIO
TIME
SPECIAL
LOCK
4.
5.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
Note
:
The
adjustment
for PICTURE
menu
(contrast, brightness,
colour, sharpness and tint) affect both the main and sub picture in
PIP
or
Twin Picture mode.
To recall your preferred setting, press the PSM button until the
desired picture (Dynamic, Standard, Mild, Game or User)
appears. The picture Dynamic, Standard, Mild and Game are
programmed for good picture reproduction at the factory and cannot be changed.
15
PICTURE Menu
Adjusting
TV
VCR
Auto Colour Control
Choose one of three automatic colour
enhance hotter colours such as red,
intense colours with more blue.
adjustments. Set
or
to warm to
set to cool to see less
DVD
CABLE
HDSTB
1.
AUDIO
2.
Press the MENU button and then Δ / Ε button to select the PICTURE menu.
Press the Γ button and then Δ / Ε button to select Colour
temp..
3.
Press the Γ button and then
desired colour temperature.
SETUP
SETUP
use Δ
/ Ε
button to select the
PSM
Contrast
PICTURE
Brightness
Colour
AUDIO
AUDIO
Sharpness
Warm
Tint
TIME
Colour temp.
Γ
Medium
Cool
SPECIAL
SPECIAL
Video preset
LOCK
LOCK
MENU
4.
5.
Prev.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
OK
You
lent
MENU
1.
2.
3.
can enjoy the vivid and hi-definition picture
Digital Reality processor technology.
with LG's excel-
Press the MENU button and then Δ / Ε button to select the
PICTURE menu.
Press the Γ button and then Δ / Ε button to select XD.
Press the Γ button and then Δ / Ε button to select On or Off
on the XD pull-down menu.
SETUP
SETUP
PSM
Contrast
PICTURE
Brightness
Colour
AUDIO
AUDIO
Sharpness
Tint
TIME
Colour temp.
SPECIAL
SPECIAL
Γ
Off
On
Video preset
LOCK
LOCK
MENU
4.
5.
Press the OK
or Φ
Repeatedly press
viewing.
Video
Use to
button.
the MENU button to return to normal TV
preset
quickly
reset all the
tory preset values.
16
Prev.
picture
menu
options
to their
original
fac-
AUDIO MENU
SSM
You
(Sound Status Memory)
can
Movie,
or
equalizer,
keeps on
1.
2.
3.
select your preferred sound setting; Standard, Music,
Speech and you can also adjust the sound frequency of
balance. If you switch AVL to on, the set automatically
an equal volume level even if you change programs.
TV
VCR
DVD
CABLE
Press the MENU button and then Δ / Ε button to select the
AUDIO menu.
Press the Γ button and then Δ / Ε button to select SSM.
Press the Γ button and then Δ / Ε button to select a sound setting on the SSM pull-down menu.
SETUP
SETUP
SSM
Γ
HDSTB
AUDIO
Standard
Music
AVL
PICTURE
AUDIO
Balance
Movie
Treble
Speech
Bass
User
TIME
TIME
Front surround
SPECIAL
SPECIAL
TV
speaker
LOCK
LOCK
MENU
4.
5.
Press the OK
or
Prev.
Φ button.
the MENU button to return to normal TV
Repeatedly press
viewing.
To recall your preferred setting, press the SSM button until the
desired sound (Standard, Music, Movie, Speech or User)
appears. The sound Standard, Music, Movie and Speech are
programmed for good sound reproduction at the factory and cannot
be changed.
If you press the SSM button after making appropriate
on the User sub menu, the display User automatically
appears even though you have already set a factory preset setting;
Standard, Music, Movie or Speech.
Note
:
adjustment
AVL
OK
MENU
SSM
(Auto Volume Leveler)
If you select AVL On, the set automatically
level even if you change programs.
keeps
on an
equal
vol-
ume
1.
2.
3.
Press the MENU button and then Δ / Ε button to select the
AUDIO menu.
Press the Γ button and then Δ / Ε button to select AVL.
Press the Γ button and then Δ / Ε button to select On or Off
on the AVL pull-down menu.
SETUP
SETUP
SSM
AVL
Γ
Off
PICTURE
Balance
On
Treble
AUDIO
Bass
TIME
TIME
Front surround
SPECIAL
SPECIAL
TV
speaker
LOCK
LOCK
MENU
4.
5.
Prev.
Press the OK or Φ button.
Repeatedly press
viewing.
the MENU button to return to normal TV
17
AUDIO MENU
Adjusting Sound Control
1.
TV
VCR
2.
DVD
CABLE
HDSTB
3.
Press the MENU button and then Δ / Ε button to select the
AUDIO menu.
Press the Γ button and then use Δ / Ε button to select the
desired sound item.
Press the Γ button and then use Φ / Γ button to make appro-
priate adjustments.
AUDIO
SETUP
Balance
0Φ L
R Γ
PICTURE
AUDIO
TIME
TIME
SPECIAL
SPECIAL
LOCK
LOCK
4.
5.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
Front surround
1.
OK
2.
3.
Press the MENU button and then Δ / Ε button to select the
AUDIO menu.
Press the Γ button and then Δ / Ε button to select Front surround.
Press the Γ button and then Δ / Ε button to select Off or SRS
TruSurround XT on the Front surround pull-down menu.
MENU
SETUP
SETUP
SSM
AVL
PICTURE
Balance
AUDIO
Treble
Bass
TIME
TIME
Front surround
SPECIAL
SPECIAL
TV
speaker
LOCK
LOCK
MENU
6.
7.
Γ
Off
SRS TruSurround XT
Prev.
SRS TruSurround XT
Takes advantage of any multi-channel format without needing to
add extra speakers or equipment. Dialog clarity, bass enrichment,
and the addition of stereo audio enhancement that produces an
immersive sound experience from standard stereo material.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
R
TruSurround XT
is
a
trademark of SRS Labs, Inc.
technology is incorporated under license from
TruSurround XT
SRS Labs, Inc.
18
AUDIO MENU
Speaker adjustment
You
adjust
can
internal
speaker
status.
Press the MENU button and then Δ / Ε button to select the
1.
AUDIO
TV
menu.
VCR
DVD
Press the Γ button and then Δ / Ε button to select TV speaker.
Press the Γ button and then Δ / Ε button to select Off, Center
2.
3.
or
On
on
the TV
speaker pull-down
SETUP
SETUP
CABLE
HDSTB
AUDIO
menu.
SSM
AVL
PICTURE
Balance
AUDIO
Treble
Bass
TIME
TIME
Off
Front surround
SPECIAL
SPECIAL
TV
speaker
Γ
Center
On
LOCK
LOCK
MENU
4.
Press the OK button.
5.
Repeatedly
viewing.
Prev.
press the MENU button to return to normal TV
Note :
a.
Allows you to toggle the TV internal speakers Off, Center or
On. If you want to use your external hi-fi stereo system, turn off
the internal TV speakers. However, you may use the internal
TV speakers as a center speaker to create a surround effect.
b. In AV, RGB-PC/DTV and DVI-PC/DTV mode, internal speaker/variable audio can be output even though there is no video
OK
signal.
MENU
Sound output selection (In
In AV
mode, you
can
select
Analogue
mode
only)
output sound for the left and right loud-
speakers.
press the I/II button to select the sound output.
Audio signal from audio L input is sent to the left loud
speaker and audio signal from audio R input is sent to the
right loud speaker.
Audio signal from audio L input is sent to left and right loud-
Repeatedly
L+R
:
L+L
:
R+R
speakers.
Audio signal
speakers.
:
Stereo
When
from audio R
input
reception (In Analogue
is sent to left and
mode
right
I/II
loud-
only)
programme is selected, the sound information for the station
appears after the programme number and station name disappear.
Broadcast
On Screen Display
a
Mono
Stereo
MONO
MONO / STEREO
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button
twice again.
19
TIME MENU
SETUP
SETUP
Auto clock
Manual clock
PICTURE
Off time
AUDIO
AUDIO
TIME
On time
Sleep
timer
Auto
sleep
Γ
SPECIAL
SPECIAL
Auto clock
The time is automatically from a digital channel signal.
The digital channel signal includes information for the current time
provided by the broadcasting station.
Set the clock manually, if the current time is set incorrectly by the
auto clock function.
1.
LOCK
LOCK
setup
2.
3.
Press the MENU button and then Δ / Ε button to select the
Time menu.
Press the Γ button and then Δ / Ε button to select Auto clock.
Press the Γ button and then Δ / Ε button to select On.
Auto clock
SETUP
SETUP
TV
VCR
Γ
Off
Manual clock
On
Off time
Time
PICTURE
PICTURE
DVD
NSW/ACT
zone
CABLE
HDSTB
On time
AUDIO
AUDIO
AUDIO
Sleep timer
TIME
Auto
sleep
MENU
Prev.
SPECIAL
SPECIAL
LOCK
LOCK
4.
Press the Γ button and then Δ / Ε button to select your viewing
time zone; NSW/ACT, NT, TAS, WA, SA, QLD, or VIC.
Press the OK or Φ button.
Repeatedly press the MENU button to return to normal TV
area
5.
6.
viewing.
Manual clock
If current time
1.
2.
OK
3.
setup
setting
is wrong, reset the clock
manually.
Press the MENU button and then Δ / Ε button to select the
Time menu.
Press the Γ button and then Δ / Ε button to select Manual
clock.
Press the Γ button and then Φ / Γ button to select either the
year, date, or time option.
SETUP
SETUP
Year
Auto clock
MENU
Manual clock
Γ
2004
Date
12
:
15
Time
5
:
36
PICTURE
PICTURE
Off time
PM
On time
AUDIO
AUDIO
Sleep timer
TIME
Auto
sleep
MENU
Prev.
SPECIAL
SPECIAL
LOCK
LOCK
Once selected,
use
the Δ / Ε button to set year, date, and time
options.
4.
5.
20
Press the OK
or Φ
Repeatedly press
viewing.
button.
the MENU button to return to normal TV
TIME MENU
Setting
the On/Off time
SETUP
SETUP
Timer function operates only if current time has been already set.
Off Time function overrides on Time function if they are set to the
same time.
The set must be in standby mode for the On Time to work.
Two hours after the set is switched on by the on time function it will
automatically switch
been pressed.
back to
standby
mode unless
a
button has
Auto clock
Manual clock
PICTURE
PICTURE
Off time
AUDIO
AUDIO
TIME
On time
Sleep
timer
Auto
sleep
Γ
SPECIAL
SPECIAL
LOCK
LOCK
1.
2.
3.
Press the MENU button and then Δ / Ε button to select the
Time menu.
Press the Γ button and then use Δ / Ε button to select Off
time or On time.
Press the Γ button and then use Δ / Ε button to select On.
TV
VCR
DVD
CABLE
SETUP
SETUP
Auto clock
HDSTB
AUDIO
Manual clock
PICTURE
PICTURE
Off time
AUDIO
AUDIO
On time
Sleep timer
TIME
Γ
Off
On
Time
Auto
sleep
SPECIAL
PR
Vol
6
30
:AM
ANALOGUE
0
30
LOCK
MENU
4.
5.
6.
7.
8.
Prev.
To cancel On/Off time function, select Off.
Press the Γ button and then use Δ / Ε button to adjust
hour.
Press the Γ button and then use Δ / Ε button to adjust
minute.
Only On time function; Press the Γ button and then use Δ
button to adjust programme number or volume level.
Press the OK or Φ button.
Repeatedly press the MENU button to return to normal
the
the
/ Ε
TV
viewing.
OK
MENU
21
TIME MENU
SETUP
SETUP
Auto clock
Manual clock
PICTURE
Off time
AUDIO
AUDIO
TIME
On time
Sleep
timer
Auto
sleep
Sleep
1.
Γ
SPECIAL
SPECIAL
timer
You don't have to remember to switch the set off before you go to
bed. The sleep timer automatically switches the set to standby after
the preset time elapses.
2.
3.
LOCK
LOCK
Press the MENU button and then Δ / Ε button to select the
Time menu.
Press the Γ button and then Δ / Ε button to select Sleep timer.
Press the Γ button and then Δ / Ε button to select a timer setting on the Sleep timer pull-down menu.
SETUP
SETUP
Off
Auto clock
10 Min
Manual clock
PICTURE
PICTURE
20 Min
Off time
30 Min
TV
AUDIO
AUDIO
VCR
DVD
On time
Sleep
CABLE
timer
60 Min
Γ
TIME
HDSTB
Auto
90 Min
120 Min
sleep
AUDIO
180 Min
SPECIAL
SPECIAL
240 Min
LOCK
LOCK
MENU
Prev.
4.
Press the OK or Φ button.
5.
Repeatedly
viewing.
press the MENU button to return to normal TV
Press the SLEEP button to select the number of minutes. The diswill appear on the screen, followed by 10, 20, 30, 60, 90, 120,
180 and 240. The timer begins to count down from the number of
minutes selected.
play
SLEEP
Note :
a.
To view the remaining sleep time, press the SLEEP button once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
until the display Off appears.
c.
When you switch the set off, the set releases the preset sleep time.
Auto
sleep
If there is
minutes.
no
input signal,
the set will turn off
automatically
after 10
OK
1.
2.
MENU
3.
Press the MENU button and then Δ / Ε button to select the
Time menu.
Press the Γ button and then Δ / Ε button to select Auto sleep.
Press the Γ button and then Δ / Ε button to select On or Off.
SETUP
SETUP
Auto clock
Manual clock
PICTURE
PICTURE
Off time
AUDIO
AUDIO
On time
Sleep timer
TIME
Auto
sleep
Γ
Off
On
SPECIAL
SPECIAL
LOCK
LOCK
MENU
22
Prev.
or Φ button.
press the MENU button to return to normal TV
4.
Press the OK
5.
Repeatedly
viewing.
SPECIAL MENU
Main Picture Source Selection
SETUP
SETUP
Main
Sub
Inputs can be set for TV, AV, Component or RGB-PC mode. AV mode
is used when a video cassette recorder (VCR), or other equipment is
connected to the set.
input
input
PICTURE
PICTURE
Subtitle
AUDIO
AUDIO
Child lock
ARC
TIME
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
2.
3.
Press the MENU button and then Δ / Ε button to select the
SPECIAL menu.
Press the Γ button and then Δ / Ε button to select Main input.
Press the Γ button and then Δ / Ε button to select Digital,
Analogue, Video 1, Video 2, Video 3, Component 1,
Component 2, RGB-PC, RGB-DTV, DVI-PC or DVI-DTV.
Demo
SPECIAL
SPECIAL Γ
LOCK
LOCK
TV
VCR
DVD
CABLE
HDSTB
SETUP
SETUP
Main
Sub
PICTURE
PICTURE
input
input
Subtitle
Γ
Digital
AUDIO
Analogue
Video 1
D/A TV
Video 2
AUDIO
AUDIO
Child lock
Video 3
TV/AV
ARC
Component1
Demo
Component2
TIME
DVI-DTV
LOCK
LOCK
MENU
Video 1
1
2
3
4
56
7
89
RGB-PC
SPECIAL
Prev.
:
VCR connected to the VIDEO1 INPUT sockets of the
:
VCR connected to the VIDEO2 INPUT sockets of the
0
set
Video 2
set
4.
5.
PR
VCR connected to the VIDEO3 sockets of the set
Component1/2 : DVD connected to the DTV/DVD INPUT sockets on the back of set
RGB-PC/DTV : PC or SET TOP box connected to the RGB
INPUT sockets on the back of set
DVI-PC/DTV : PC or SET TOP box connected to the DVI
INPUT sockets on the back of set
Press the OK or Φ button.
Repeatedly press the MENU button to return to normal TV viewing.
Video 3
:
Alternatively you can select the TV, AV, Component, RGB-PC
DVI-DTV mode by pressing the TV/AV button.
or
OK
MENU
In AV, Component, RGB-PC or DVI-DTV mode, to return to TV
mode, press the PR +/- or NUMBER buttons.
Press the D/A TV button to select
digital
or
analogue
mode.
23
SPECIAL MENU
SETUP
Main
Sub
input
input
PICTURE
Subtitle
1.
Subtitle
AUDIO
AUDIO
TIME
TIME
Child lock
2.
ARC
3.
Demo
(In
DTV mode
only)
Press the MENU button and then Δ / Ε button to select the
SPECIAL menu.
Press the Γ button and then Δ / Ε button to select Subtitle.
Press the Γ button and then Δ / Ε button to select On or Off
on the Subtitle pull-down menu.
SPECIAL Γ
SETUP
SETUP
Main
Sub
LOCK
input
input
PICTURE
PICTURE
Subtitle
AUDIO
AUDIO
Γ
Off
On
Child lock
ARC
TIME
TV
Demo
VCR
DVD
SPECIAL
CABLE
HDSTB
LOCK
LOCK
AUDIO
Prev.
MENU
4.
Press the OK
5.
Repeatedly
viewing.
You
can
or Φ
button.
the
MENU button to return to normal TV
press
select Subtitle
off with the TEXT button in DTV mode.
on or
Child Lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
2.
3.
Press the MENU button and then Δ / Ε button to select the
SPECIAL menu.
Press the Γ button and then Δ / Ε button to select Child lock.
Press the Γ button and then Δ / Ε button to select On or Off.
SETUP
SETUP
Main
Sub
input
input
PICTURE
PICTURE
Subtitle
OK
AUDIO
AUDIO
Child lock
Γ
Off
On
ARC
TIME
Demo
MENU
SPECIAL
LOCK
LOCK
MENU
Prev.
or Φ
4.
Press the OK
5.
Repeatedly press
button.
the MENU button to return to normal TV
viewing.
With the lock on, the display Child lock On appears on the screen
if any button on the front panel is pressed while viewing the TV.
Note : The display Child lock On will not appear on the screen if
any button on the front panel is pressed while displaying the menus.
24
SPECIAL MENU
Picture format
SETUP
SETUP
watch TV in various picture formats; Auto, 4:3, 16:9 (Wide),
14:9, Zoom and Cinema zoom.
You can repeatedly press the ARC button to select your desired picture format.
You
can
Auto
4:3
16:9
Main
Sub
input
input
PICTURE
PICTURE
Subtitle
AUDIO
AUDIO
Child lock
ARC
TIME
Demo
SPECIAL
SPECIAL Γ
LOCK
LOCK
TV
VCR
DVD
Cinema
Zoom
zoom
14:9
CABLE
HDSTB
AUDIO
ARC
Note:
a.
You are available to 4:3 and 16:9 in DVI-PC and RGB-PC mode.
b. Auto: When your TV receives the wide screen signal, it will be
automatically changed to the picture format to be sent. (Not
available in all countries)
c.
You can adjust the enlarge proportion of Cinema Zoom using Δ / Ε
button. The adjustment range is 1
16.
~
Demo
Shows you how to
1.
2.
3.
navigate
the TV's
on-screen menus.
Press the MENU button and then Δ / Ε button to select the
SPECIAL menu.
Press the Γ button and then Δ / Ε button to select Demo.
Press the Γ button and then Δ / Ε button to select Auto demo
or XD demo on the Demo pull-down menu.
OK
SETUP
SETUP
Main
Sub
PICTURE
PICTURE
input
input
Subtitle
AUDIO
AUDIO
MENU
Child lock
ARC
TIME
Demo
Γ
Auto demo
demo
SPECIAL
LOCK
LOCK
MENU
Prev.
4.
Press the Γ button to start.
5.
Auto demo : Use to scan the features and menu options avaiable on your TV.
XD demo : Use to see the difference between XD Demo and
XD Demo Off.
Press the EXIT button to stop Demo.
25
LOCK MENU
Lock system
SETUP
Set
password
PICTURE
Block programme
AUDIO
AUDIO
Parental
guidance
Aux. block
Lock
setup
Lets you set up blocking schemes to block specific channels,
ings, and external viewing sources.
A password is required to gain access to this menu.
rat-
TIME
TIME
1.
SPECIAL
SPECIAL
LOCK
Γ
Press the MENU button and then Δ / Ε button to select the
LOCK menu.
Then, press the Γ button to enter the password as requested.
Lock system
SETUP
SETUP
Set
Γ
Off
On
password
PICTURE
PICTURE
Block programme
TV
Parental
AUDIO
AUDIO
VCR
DVD
guidance
Aux. block
CABLE
TIME
HDSTB
AUDIO
SPECIAL
SPECIAL
LOCK
LOCK
MENU
Prev.
The TV is set up with the initial
1
2
3
4
56
7
89
2.
password
"0-0-0-0".
Use the Δ / Ε button to choose from the following Lock menu
is selected, change the settings to
options. Once the option
your preference.
Lock system
Activates or disables the blocking scheme you set up previously.
Set password
Change the password by inputting a new password twice.
Parental guidance (In DTV mode)
Prevents children from watching certain children's TV programs,
according to the ratings limit set.
Aux. block
Enables you to select a source to block from the external source
devices you have hooked up.
0
OK
MENU
or Φ
4.
Press the OK
5.
Repeatedly press
viewing.
Note
:
If you
forgot
button.
the MENU button to return to normal TV
your
remote control handset.
26
password, press '7', '7', '7',
'7'
on
the
Picture In Picture
Option :
PIP (Picture
in
Picture) displays
a
picture
within
a
(PIP) Function
picture.
On and off
TV
VCR
Press the PIP button to switch on the sub picture.
Press EXIT button to switch it off.
Each press of PIP button changes the screen display
below.
Note
ture
: When the sub picture
quality might get poor.
Input
size is 1/2 of the main
mode selection for sub
DVD
CABLE
HDSTB
AUDIO
shown
as
the
picture,
pic-
picture
Press the PIP INPUT button to select the
input
mode for the sub
picture.
PIP
Each time this button is pressed, each
ture is displayed as shown below.
input
mode for the sub
pic-
Main Picture Source
Available Sub Picture Source
Digital signal
Analogue Signal
Analogue, Video1, Video2, and Video3
Digital, Video1, Video2, and Video3
Note : When the PIP function is switched on, you
in the Special menu.
Swapping
between main and sub
Press the SWAP button to
exchange
can
also
adjust
OK
it
EXIT
picture
the main and sub
picture.
PIP PR-
Note
When the main
swapping is available.
:
Programme
picture
is
Digial, Analogue
selection for sub
or
PIP PR+
SWAP
PIP INPUT
AV modes, the
picture
The sub picture programme selection is available when the sub picture is TV mode. Press the PIP PR +/- buttons to select a programme
for the sub picture.
Sub
picture position change
InPIPmode,presstheΔ/Ε/Φ/Γbuttontomovethesubpicture to a different location on the screen.
27
Teletext
Teletext
(or TOP text)
is
with the teletext system
Teletext is
TV
a
optional function,
an
can
free service broadcast
VCR
information
up-to-the-minute
grams, share prices
DVD
CABLE
HDSTB
therefore
only
a
set
receive the teletext broadcast.
on
by
most TV stations which
news,
and many other
gives
weather, television pro-
topics.
AUDIO
The teletext decoder of this TV
can
support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corre-
sponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
TEXT
Switch on/off
Press the TEXT button to switch to teletext.
If TV and text
picture
are
displayed
half and half of the screen,
press the TEXT button again to display text picture fully.
The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are
OK
28
the
displayed
headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT button to switch off teletext. The previous mode
on
screen
reappears.
Teletext
TOP text
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
TV
VCR
DVD
CABLE
Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the Δ button can be used.
4. The red button permits to return to previous selection.
Alternatively the Ε button can be used.
Direct page selection
HDSTB
AUDIO
1
2
3
4
56
7
89
0
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
FASTEXT
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
OK
selection
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The Δ / Ε button can be used to select the preceding or fol-
Page
1.
2.
3.
4.
lowing page.
29
Teletext
Special
teletext functions
REVEAL
TV
VCR
Press this button to display concealed information, such as
solutions of riddles or puzzles.
Press this button again to remove the information from the
DVD
CABLE
HDSTB
AUDIO
display.
1
2
4
56
7
89
0
3
SIZE
Selects double height text.
Press this button to enlarge the top half of the page.
Press this button again to enlarge the bottom half of the
page.
Press this button
again
to return to the normal
display.
UPDATE
Displays the TV picture on the screen while waiting for the
teletext page.
Press this button to view the updated teletext page.
new
HOLD
Stops
the automatic page
change
which will
occur
if
a
tele-
text page consists of 2 or more sub pages. The number of
OK
sub pages and the sub page displayed is, usually, shown
on the screen below the time. When this button is pressed
the stop symbol is displayed at the top left-hand corner of
the screen and the automatic page change is inhibited.
To continue press this button again.
MIX
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
To switch the TV picture off press this button again.
Note : When TV and text picture are displayed half and half
of the screen, MIX function is not available.
TIME
This button has two functions:
?
30
TV programme, press this button to disthe top right hand corner of the screen.
Press this button again to remove the display.
b) In teletext mode, press this button to select a sub page
number. The sub page number is displayed at the bottom
of the screen. To hold or change the sub page, press the
RED/ GREEN or Δ / Ε or NUMBER buttons. Press this
button again to exit this function.
a) When viewing
play the time at
a
Other functions
EPG
(Electronic Programme Guide) (In Digital mode only)
This function can be used only when the EPG information is broadcasted by broadcasting companies.
This system has an Electronic Programme Guide (EPG) to help
your navigation through all the possible viewing options.
The EPG supplies information such as programme listings, start
and end times for all available services.
In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme
details will vary, depending on the particular broadcaster).
TV
VCR
DVD
CABLE
HDSTB
AUDIO
Switch on/off EPG
1. Press the GUIDE button to switch on EPG.
2. Press the GUIDE button again to switch off EPG and return to
TV
viewing.
The Bold And The Beautiful
11 TEN
Digital
Mon Dec. 15 4:59PM
4:30PM~4:59PMccDD
G
The story of the
glamerous ferrester family: ther loves,
tragedies, triumphs and struggles for power in the fashion
industry.
TV
11 TEN
NOW
Digital
NEXT
The Bold And The Beauti...
TEN News
The Bold And The Beauti...
TEN News
GUIDE
12 TEN HD
13 TEN
Digital
1
No Information
No Information
14 TEN
Digital
2
No Information
No Information
15 TEN
Digital
3
No Information
No Information
16 TEN
Digital
4
No Information
No Information
Pr.
Radio
Change
OK
More Info
Select a programme
Press the Δ / Ε , Φ / Γ button to select desired programme, then
press the OK button to display the selected programme.
The Bold And The Beautiful
11 TEN
Digital
Mon Dec. 15 4:59PM
4:30PM~4:59PMccDD
G
The story of the
glamerous ferrester family: ther loves,
tragedies, triumphs and struggles for power in the fashion
industry.
Back
Color button
operation
RADIO programmes
RED
shows the TV
GREEN
the detail infomation
or
on or
off
31
Connection of PC
PC in socket
RGB INPUT
UPGRADE PORT
PC/DTV
COMPONENT
DIGITAL AUDIO
OPTICAL OUTPUT
INPUT2
INPUT1
(XGA
/480p
/576p
/720p
/1080i)
RGB/DVI INPUT
Y
DIGITAL AUDIO
OPTICAL INPUT1
(L)
(COMPONENT2)
PB
S-VIDEO
AUDIO
(R)
DIGITAL AUDIO
OPTICAL INPUT2
PR
VIDEO 1
INPUT
VIDEO 2
INPUT
MONITOR
OUT
AUDIO
CENTER
MODE IN
(DVI)
VIDEO
VARIABLE
AUDIO OUT
PC/DTV
(XGA
/480p
/576p
/720p
/1080i)
(L)
AUDIO
(R)
(R)
DVI INPUT
(L)
(L)
AUDIO
MONO
AUDIO
(R)
DTV/DVD INPUT
PERSONAL COMPUTER
How to connect
1. To get the best picture quality, adjust the PC graphics card to
1024x768, 60Hz.
2. Use the set's RGB INPUT or DVI (Digital Visual Interface) INPUT
port for video connections, depending on your PC connector.
If the graphic card on the PC does not output analogue and digital RGB simultaneously, connect only one of either RGB
INPUT or DVI INPUT to display the PC on the set.
If the graphic card on the PC does output analogue and digital
RGB simultaneously, set the TV to either RGB or DVI; (the
other mode is set to Plug and Play automatically by the set.)
3. Then, make the corresponding audio connections. If using a
sound card, adjust the PC sound as required.
How to use
1. Switch on the PC, and the PC screen appears on the set.
The set can be operated as the PC monitor.
2. Check the image on your set. There may be noise associated
with the resolution, vertical pattern, contrast or brightness in PC
mode. If noise is present, change the PC mode to another resolution, change the refresh rate to another rate or adjust the
brightness and contrast on the menu until the picture is clear. If
the refresh rate of the PC graphic card can not be changed,
change the PC graphic card or consult the manufacturer of the
PC graphic card.
Note:
a.
b.
c.
Depending on the graphics card, DOS mode may not work if
you use a DVI-I cable.
Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed image may become permanently imprinted on the screen.
The synchronization input form for Horizontal and Vertical frequencies is separate.
Displayable
Monitor
Specification (RGB-PC
/ DVI-PC
Mode)
MODE
Resolution
EGA
640x350
31.468
70.09
640x480
31.469
59.94
640x480
37.861
72.80
640x480
37.500
75.00
800x600
35.156
56.25
800x600
37.879
60.31
800x600
48.077
72.18
800x600
46.875
75.00
1024x768
48.363
60.00
1024x768
56.476
70.06
1024x768
60.023
75.02
Horizontal
Frequency(KHz)
VGA
Vertical
Frequency(Hz)
SVGA
XGA
32
Connection of PC
RGB-PC / DVI-PC Mode
(option)
SETUP
SETUP
Main
Sub
1.
2.
3.
4.
Press the MENU button and then Δ / Ε button to select the
SPECIAL menu.
Press the Γ button and then Δ / Ε button to select Main input.
Press the Γ button and then Δ / Ε button to select RGB-PC or
DVI-PC
Press the EXIT button to return to normal viewing.
POSITION
input
input
PICTURE
PICTURE
Subtitle
AUDIO
AUDIO
Child lock
ARC
TIME
Demo
SPECIAL
SPECIAL Γ
LOCK
LOCK
Γ
SIZE
Δ
Γ
Φ
Ε
PHASE
TV
VCR
RESET
DVD
CABLE
MENU
Δ
Ε
Close
Move
HDSTB
OK
AUDIO
5.
6.
Press the OK button and then Δ / Ε button to select the
desired picture item.
Press the Φ / Γ or Δ / Ε button to make appropriate adjustments.
Position
This function is to
adjust picture
to
left/right
and
up/down
as
you
prefer.
Size
This function is to
you
adjust picture
size to
enlarges
or
reduces
as
prefer.
Phase
This function allows you to remove any horizontal noise and
clear or sharpen the image of characters.
Note : Some signal from some graphics boards may not function properly. If the results are unsatisfactory, adjust your monitor's position, size and phase manually.
Reset
This function allows you to return to the good picture reproduction programmed at the factory and cannot be changed.
7.
Press the OK button to store it for the PC monitor
OK
MENU
EXIT
picture.
33
Connection of external
You
can
connect additional
equipment
equipment,
such
as
VCRs, camcorders
etc. to your set.
Here shown may be somewhat different from your set.
RGB INPUT
UPGRADE PORT
PC/DTV
(XGA
/480p
/576p
/720p
/1080i)
COMPONENT
DIGITAL AUDIO
OPTICAL OUTPUT
INPUT2
INPUT1
Aerial socket
RGB/DVI INPUT
Y
DIGITAL AUDIO
OPTICAL INPUT1
(L)
(COMPONENT2)
PB
S-VIDEO
AUDIO
(R)
VIDEO 1
INPUT
DIGITAL AUDIO
PR
OPTICAL INPUT2
VIDEO 2
INPUT
1.
MONITOR
OUT
AUDIO
CENTER
MODE IN
(DVI)
VIDEO
VARIABLE
AUDIO OUT
PC/DTV
(XGA
/480p
/576p
/720p
/1080i)
(L)
(L)
(L)
AUDIO
MONO
AUDIO
(R)
AUDIO
(R)
(R)
DVI INPUT
DTV/DVD INPUT
2.
3.
VCR
4.
5.
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
Audio/Video
RGB INPUT
UPGRADE PORT
input
sockets
(option)
PC/DTV
(XGA
/480p
/576p
/720p
/1080i)
COMPONENT
DIGITAL AUDIO
OPTICAL OUTPUT
INPUT2
INPUT1
1.
RGB/DVI INPUT
Y
DIGITAL AUDIO
OPTICAL INPUT1
(L)
(COMPONENT2)
PB
S-VIDEO
AUDIO
(R)
DIGITAL AUDIO
OPTICAL INPUT2
PR
VIDEO 1
INPUT
VIDEO 2
INPUT
MONITOR
OUT
AUDIO
CENTER
MODE IN
(DVI)
VIDEO
VARIABLE
AUDIO OUT
PC/DTV
(XGA
/480p
/576p
/720p
/1080i)
(L)
(L)
(L)
AUDIO
MONO
AUDIO
(R)
AUDIO
3.
(R)
(R)
DVI INPUT
2.
DTV/DVD INPUT
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set.
Press the TV/AV button to select Video1, Video2 or Video3.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
VCR
S-Video / Audio
PC/DTV
(XGA
/480p
/576p
/720p
/1080i)
COMPONENT
DIGITAL AUDIO
OPTICAL OUTPUT
INPUT2
INPUT1
1.
(L)
(COMPONENT2)
PB
S-VIDEO
AUDIO
(R)
PR
VIDEO 1
INPUT
VIDEO 2
INPUT
MONITOR
OUT
AUDIO
CENTER
MODE IN
(DVI)
VIDEO
VARIABLE
AUDIO OUT
PC/DTV
(XGA
/480p
/576p
/720p
/1080i)
(L)
(L)
(L)
AUDIO
MONO
AUDIO
AUDIO
(R)
2.
(R)
(R)
DVI INPUT
(option)
picture qual-
RGB/DVI INPUT
Y
DIGITAL AUDIO
OPTICAL INPUT1
DIGITAL AUDIO
OPTICAL INPUT2
sockets
When connecting an VCR to the S-VIDEO socket, the
ity will be further improved.
RGB INPUT
UPGRADE PORT
input
DTV/DVD INPUT
3.
Connect the S-video socket of the VCR to the S-VIDEO socket
of the set.
Connect the audio cable from the VCR to the AUDIO sockets of
the VIDEO2 INPUT or VIDEO3.
Select Video2 or Video3 by pressing the TV/AV button
repeatedly.
VCR
4.
Press the PLAY button on the VCR.
The VCR playback picture appears on the
screen.
Note : If both S-VIDEO and VIDEO sockets have been connected
to the VCR simultaneously, only the S-VIDEO can be received.
RGB INPUT
UPGRADE PORT
PC/DTV
COMPONENT
DIGITAL AUDIO
OPTICAL OUTPUT
INPUT2
INPUT1
Y
DIGITAL AUDIO
OPTICAL INPUT1
Monitor
RGB/DVI INPUT
PB
PR
(DVI)
S-VIDEO
AUDIO
(R)
VIDEO 1
VIDEO 2
MONITOR
INPUT
INPUT
OUT
AUDIO
CENTER
MODE IN
V
DEO
VARIABLE
AUDIO OUT
PC/DTV
(XGA
/480p
/576p
/720p
/1080i)
(L)
AUDIO
(R)
(L)
(L)
AUDIO
(R)
DVI INPUT
MONO
AUDIO
(R)
DTV/DVD INPUT
Second TV
34
output sockets
(L)
(COMPONENT2)
DIGITAL AUDIO
OPTICAL INPUT2
(XGA
/480p
/576p
/720p
/1080i)
Connect the audio/video in sockets of the other TV
MONITOR OUTPUT sockets of the set.
or
monitor to
Connection of external
DVD
1.
2.
3.
2.
3.
input
1.
PC/DTV
(XGA
/480p
/576p
/720p
/1080i)
COMPONENT
DIGITAL AUDIO
OPTICAL OUTPUT
INPUT2
INPUT1
RGB/DVI INPUT
Y
DIGITAL AUDIO
OPTICAL INPUT1
(L)
(COMPONENT2)
PB
S-VIDEO
AUDIO
(R)
DIGITAL AUDIO
OPTICAL INPUT2
PR
VIDEO 1
INPUT
VIDEO 2
INPUT
MONITOR
OUT
AUDIO
CENTER
MODE IN
(DVI)
VIDE O
VARIABLE
AUDIO OUT
PC/DTV
(XGA
/480p
/576p
/720p
/1080i)
(L)
(L)
(L)
AUDIO
MONO
AUDIO
(R)
AUDIO
(R)
(R)
DVI INPUT
DTV/DVD INPUT
player.
on
the
screen.
DVD
sockets
Connect the SET TOP output sockets to the DTV/DVD INPUT
sockets (Y PB PR) of the set. (or, connect the HD-SET TOP with
the D-Sub output socket to PC/DTV INPUT socket on the set
and audio cable of the HD-SET TOP to the AUDIO sockets of
PC/DTV INPUT.)
Connect the audio cable from the SET TOP to the DTV/DVD
INPUT AUDIO sockets of the set.
Press the TV/AV or MULTIMEDIA button to select Component1,
Component2 or RGB-DTV.
Position / Phase / Reset adjustment
You can adjust horizontal/vertical position,
prefer in RGB-DTV mode.
2.
RGB INPUT
UPGRADE PORT
Component2.
Press the PLAY button on the DVD
The DVD playback picture appears
DTV
1.
sockets
Connect the DVD output sockets (Y Cb Cr, Y Pb Pr, Y B-Y R-Y
or Y PB PR) of the DVD player to the DTV/DVD INPUT sockets
(Y PB PR) of the set.
Connect the audio cable from the DVD player to DTV/DVD
INPUT AUDIO sockets of the set.
Press the TV/AV or MULTIMEDIA button to select Component1
or
4.
input
equipment
RGB INPUT
UPGRADE PORT
PC/DTV
(XGA
/480p
/576p
/720p
/1080i)
COMPONENT
DIGITAL AUDIO
OPTICAL OUTPUT
INPUT2
INPUT1
RGB/DVI INPUT
Y
DIGITAL AUDIO
OPTICAL INPUT1
(L)
(COMPONENT2)
PB
S-VIDEO
AUDIO
(R)
DIGITAL AUDIO
OPTICAL INPUT2
PR
VIDEO 1
INPUT
VIDEO 2
INPUT
MONITOR
OUT
AUDIO
CENTER
MODE IN
(DVI)
VIDEO
VARIABLE
AUDIO OUT
PC/DTV
(XGA
/480p
/576p
/720p
/1080i)
(L)
(L)
(L)
AUD O
MONO
AUDIO
AUDIO
(R)
(R)
(R)
DVI INPUT
DTV/DVD INPUT
SET TOP Box
phase
or
reset as you
Press the OK button in RGB-DTV mode.
Press the Δ / Ε button to select POSITION, PHASE
or
RESET.
RGB INPUT
UPGRADE PORT
PC/DTV
POSITION
Γ
COMPONENT
DIGITAL AUDIO
OPTICAL OUTPUT
INPUT2
INPUT1
Y
DIGITAL AUDIO
OPTICAL INPUT1
(L)
(COMPONENT2)
PB
SIZE
Δ
PR
(DVI)
Γ
VIDEO 1
INPUT
VIDEO 2
INPUT
MONITOR
OUT
AUDIO
CENTER
MODE IN
VIDEO
VARIABLE
AUDIO OUT
PC/DTV
PHASE
S-VIDEO
AUDIO
(R)
DIGITAL AUDIO
OPTICAL INPUT2
Φ
(XGA
/480p
/576p
/720p
/1080i)
RGB/DVI INPUT
Ε
(XGA
/480p
/576p
/720p
/1080i)
DVI INPUT
(L)
AUDIO
(R)
(L)
(L)
MONO
AUDIO
(R)
AUDIO
(R)
DTV/DVD INPUT
RESET
MENU
3.
Close
Δ
Ε
Move
OK
Press the Δ / Ε or Φ / Γ button to make
SET TOP Box
appropriate adjust-
ments.
4.
Repeatedly press
viewing.
the MENU button to return to normal TV
35
Troubleshooting
check list
Symptoms
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Poor
brightness
Strange
sound from inside the monitor
Check these items and try to
adjust these
The mains
plug-(plugged
in and switched
on)
Is the TV switched on?
Try
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
Contact LG service
A
(VCR only)
provider(s)
in ambient humidity or temperamay result in an unusual noise at the
time of switching off or on of the monitor and
does not indicate a fault with the monitor
change
ture
Download PDF

advertising