LG | PF-43A20 | LG PF-43A20 Owner’s Manual

COLOUR TELEVISION
OWNER'S MANUAL
Before
connecting, operating or adjusting
product, please read this instruction
booklet carefully and completely.
this
3
PF-60A30
PF-52A70
PF-43A20
Year
Guarantee
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel
4
Basic operation
On and off
Programme selection
Volume adjustment / Mute function
On screen language selection (option)
7
On
8
screen menus
Menu selection
up TV stations
Auto programme tuning
Manual programme tuning
Fine tuning
Programme edit
Setting
Picture adjustment
Picture adjustment
9
13
Convergence
Sound adjustment
Sound adjustment
Stereo/Dual reception
NICAM reception (option)
Sound output selection
15
Other functions
TV and AV modes / Child lock
Auto sleep
Off timer / On timer
Auto demonstration
Calling a programme table
17
PIP
20
operation (option)
On and off / Programme selection for sub picture
Input mode selection for sub picture
Swapping between main and sub pictures
Sub picture size / Sub picture freeze
Sub picture position change / Programme scan
Teletext (option)
Switch on/off
LIST mode / TOP mode / FASTEXT mode
Special teletext functions
21
Connection of external equipment
Aerial socket
Audio/Video in/out sockets
Euro scart socket
24
S-video/Audio in sockets
Troubleshooting
2
check list
(S-AV)
26
Installation
Power
This set operates on an AC mains supply, the voltage is as
indicated on the label on the back cover. Never apply DC power to
the set. In the event of thunderstorms
out the aerial and mains
or
powercuts, please pull
plugs.
Warning
To prevent fire
moisture.
or
shock hazard, do not expose the set to rain
or
Service
Never
remove
the back
high voltage
properly, unplug it
very
cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75Ω
For the best
cover.
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set
so
that
no
bright light
or
sunlight
falls
directly
onto the screen. Care should be taken not to expose the set to
any unnecessary vibration, moisture, dust or heat. Also ensure that
the set is placed in a position to allow a free flow of air. Do not
cover
the ventilation
Do not
on
place
the set
openings on the
on a sloping or
the bottom of the set may
back
cover.
unstable
cause
area as
it to
move
the casters
and to be
damaged.
3
Location and function of controls
All the functions
can
be controlled with the remote control
handset. Some functions
on
the front
panel
also be
can
adjusted
with the buttons
of the set.
Remote control handset
Before you use the remote control handset,
batteries. See the next page.
1
POWER
install the
MUTE
1.
2
please
1
2
POWER
switches the set
I/II
3
on
from
standby
or
off to
standby.
8
4
5
PSM
6
3
2.
5
7
8
9
TV/AV
PIP
0
TEXT
MENU
9
MUTE
switches the sound
3.
4.
off.
NUMBER BUTTONS
switch the set
10
on or
from
on
PIP BUTTONS
standby
select
directly
or
a
number.
(option)
PIP
switches the sub
picture
on or
off.
PR+/-
PR
selects
VOL
VOL
OK
11
a
programme for the sub
picture.
SWAP
alternates between main and sub
PR
picture.
INPUT
PR-
PR+
SWAP
INPUT
selects the
4
SSM
DUAL
LIST
5
SIZE
6
adjusts
12
7
CH
CH
QSR
picture
size.
picture.
POSITION
M
relocates the sub
START LENGTH SP/LP ON/OFF
V
C
R
the sub
freezes motion of the sub
13
PIP
picture.
STILL
STILL POSITION 9/4 PIP
T
X
T
mode for the sub
SIZE
8
PSM
input
picture
in clockwise direction.
9/4 PIP
REW
P/STILL
PLAY
STOP
FF
switches
sub
REC
on or
off the programme
scan
pictures.
5.
PSM (Picture Status
recalls your preferred
6.
SSM
Memory)
picture setting.
(Sound Status Memory)
preferred sound setting.
recalls your
7.
VCR BUTTONS
control
4
a
(option)
LG video cassette recorder.
mode
through
9
or
4
Location and function of controls
8.
I/II
(DUAL)
selects the
selects
9.
language during dual language broadcast.
sound during stereo broadcasts.
mono
TV/AV
selects TV
or
AV mode.
10. MENU
selects
POWER
a menu.
MUTE
1
11. Δ / Ε
2
1
2
3
4
5
6
7
8
9
I/II
0
TV/AV
PIP
TEXT
(Programme Up/Down)
on from standby.
switches the set
selects
a
programme
or a menu
item.
3
Φ / Γ (Volume Down/Up)
adjusts
adjusts
the volume.
menu
8
settings.
OK
accepts your selection
or
displays
9
13
MENU
10
the current mode.
OK
12. LIST
display
PR
the programme table.
VOL
VOL
11
PR
13. TELETEXT BUTTONS
These buttons
are
For further details,
Note
:
(option)
REW
PLAY
FF
P/STILL
STOP
REC
used for teletext.
see
the 'Teletext' section.
In teletext mode, the PR+/-, SWAP and INPUT buttons
are
7
4
used for teletext function.
QSR
V
C
R
Battery
installation
CH+
START
LENGTH
CH-
SP/LP
ON/OFF
SSM
LIST
PSM
5
The remote control handset is
powered by
two AA
To load the batteries, turn the handset over and slide open the 6
battery compartment. Install two batteries as indicated by the
polarity symbols(
and
)
12
type batteries.
marked inside the compartment.
SIZE
STILL
T
X
T
POSITION
?
PR
PR
SWAP
9/4PIP
M
i
13
INPUT
or
Note
:
To avoid
damage from possible battery leakage,
batteries if you do not plan to
extended period of time.
use
the
remove
the remote control handset for
an
5
Location and function of controls
Front
?
panel
PF-60A30 series
TV/AV
SSM
PSM
MENU
OK
VOL
/I
PR
10
1
STAND BY
AV2
6A3
R
ONO
V
A
DO
3
5
4
11
7
6
VD
D
O
2
9
8
O
MAIN
POWER
<SIDE OF TV>
?
PF-52A70 series
TV/AV
SSM PSM
4
5
6
MENU
OK
VOL
PR
/
STAND BY
10
1
(L/MONO)
(R)
AUDIO
VIDEO
S-V DEO
AV2
2
3 11
79
8
MAIN
POWER
<SIDE OF TV>
?
PF-43A20 series
STAND BY
TV/AV
MENU
OK
VOL
AV2
PR
S-VIDEO
1
1.
2.
3.
4.
5.
MAIN POWER
switches the set
10
3
7.
on or
off.
IN SOCKETS (AV 2)
Connect the audio/video (or S-video) out
sockets of external equipment to these
sockets.
MENU
selects
8.
AV mode.
or
displays
6
(Programme Up/Down)
POWER
switches the set
on
from
standby
the volume.
menu
settings.
or
off to
POWER / STANDBY INDICATOR
illuminates when the set is in standby mode.
dims when the set is switched on.
(Picture Status Memory)
recalls your preferred picture setting.
SSM (Sound Status Memory)
recalls your preferred sound setting.
the current
mode.
Φ / Γ (Volume Down/Up)
R
2
11. PSM
OK
adjusts
adjusts
7
10. REMOTE CONTROL SENSOR
a menu.
accepts your selection
6.
Δ / Ε
6
AUD O
standby.
9.
or
58 9
L/MONO
switches the set on from standby.
selects a programme or a menu item.
AUDIO/VIDEO(or S-VIDEO)
TV/AV
selects TV
4
VIDEO
*
CASTERS (on the bottom)
turn and move the set
easily.
Basic
operation
On and off
1.
2.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, Δ / Ε, TV/AV
or NUMBER buttons on the remote control handset to switch it
on
3.
fully.
Press the POWER button
more.
4.
The set reverts to
on
the remote control handset
standby.
again
Press the main power button
once
to switch the set off.
POWER
Note
:
If, while the
connected the set will switch
on
when the
plug is dismains plug is replaced in
the mains power socket.
Programme
selection
You
a
can
select
MUTE
set is switched on, the mains
programme number with the Δ / Ε
or
NUMBER
1
2
3
4
5
6
7
8
9
I/II
0
TV/AV
buttons.
MENU
Volume
adjustment
Press the Φ / Γ button to
OK
adjust
the volume.
PR
VOL
Mute function
Press the MUTE button. The sound is switched off and the
MUTE appears. You
SSM or I/II button.
On
screen
The
menu can
can
language
be
VOL
PR
cancel it
by pressing
selection
displayed
on
the
display
Γ,
the MUTE, Φ /
(option)
screen
in the desired
language.
SSM
First select your language.
1. Press the MENU button to display the Main menu.
2. Press the Φ / Γ button to select the Function menu icon
3. Press the OK button to display the Special function menu.
4. Press the Δ / Ε button to select Language.
5. Set the desired language with the Φ / Γ button.
6. Press the OK button.
.
7
On
screen menus
The
an
dialogue
operator
also
between you and your set takes place on screen with
The buttons required for the operating steps are
menu.
displayed.
Menu selection
1.
2.
Press the MENU button to display the Main menu.
Press the Φ / Γ button to select each menu icon.
The selected menu icon changes from green to purple.
3. Press the OK button to display the sub menu.
4. Press the Δ / Ε button to select a menu item.
The selected menu item changes from green to purple.
5. Press the Φ / Γ button to change the setting of a menu item or
OK button to display the sub menu.
Note :
a. The menus automatically disappear in about 1 minute if you do
not press a button.
b. In the AV mode, the Station menu icon is not selected.
c. In the teletext mode, menus are not displayed.
MENU
Station
AutoOprogramme
ManualOprogramme
ProgrammeOedit
OK
PR
VOL
VOL
Δ ΕOOKOTV
AV
PR
Station
menu
(TV mode)
Picture
Standard
Game
Mild
Cinema
User
Convergence
Δ ΕOOK OTV
Picture
AV
menu
Sound
EqualizerOOOOOOCinema
Station
BalanceOOOOOOOOOOOO00
Φ ΓOOK OTV
AV
UBBOOOOOOOOOOOOOOOOOn
SurroundOOOOOOOOOOOff
AVLOOOOOOOOOOOOOOOOOn
Main
menu
Δ
ΕOΦ ΓO OKO TV
Sound
AV
menu
SpecialOfunction
InputOOOOOOOOOOOOOOTV
ChildOlockOOOOOOOOOff
AutoOsleepOOOOOOOOOff
OffOtimerOOOOOOO__:__
OnOtimerOOOOOOOO__:__
LanguageOOOOOOEnglish
Demonstration
Δ
ΕOΦ ΓOOKOTV
Function
8
AV
menu
Setting up
TV stations
Up to 100 TV stations can be stored in this set by programme numbers
(00 to 99). Once you have preset the stations, you will be able to use
the Δ / Ε or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Auto programme
All stations that
can
recommended that you
1.
2.
3.
4.
5.
Press
Press
Press
Press
Press
the
the
the
the
the
tuning
use
are
stored
auto programme
MENU button to
ΕOOKOTV
AV
this method. It is
installation of this set.
by
during
the Main
display
menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Δ
be received
Station
Station
menu.
Φ / Γ button to select the Station menu icon
OK button to display the Station menu.
.
Δ / Ε button to select Auto programme.
OK button to display the Auto programme
1
2
3
4
5
6
7
8
9
0
TV/AV
menu.
AutoOprogramme
StorageOfromOOOOOOOO01
SystemOOOOOOOOOOOOAUTO
Start
MENU
Δ
ΕOΦ ΓOOKOTV
AVO0~9
OK
6.
7.
Press the Δ / Ε button to select Storage from. Select the
beginning programme number with the Φ / Γ button or
NUMBER buttons. Any number under 10 is entered with a
numeric '0' in front of it, i.e. '05' for 5.
Press the Δ / Ε button to select System. Select a TV system
PR
VOL
VOL
PR
withtheΦ/Γbutton;AUTO,M,BG,IorDK.
8.
9.
Press the Δ / Ε button to select Start.
Press the OK button to begin auto programming.
AutoOprogramme
StorageOfromOOOOOOOO04
SystemOOOOOOOOOOOOAUTO
PR.O27OOCHO30OOOOOO{{{
..................
OK
All receivable stations
are stored.
The programme number and channel number being searched
appear below the display System. The channel number is assigned
and stored with CH for television or CC for cable channels.
To stop auto
programming, press
the OK button.
When auto programming is completed, the Programme edit
mode appears on the screen with the channel number. See the
'Programme edit' section to edit the stored programme.
10. Press the TV/AV button to return to normal TV
Note:
If there is
a.
viewing.
sound noise in some channels after auto
is
programming
completed, re-adjust System to M, BG, I or
DK in Manual programme tuning. Refer to 'Manual programme
b.
tuning.
During
auto
a
programming is performing, pictures of
through the sub picture.
scanned
programmes appears
9
Setting up
Station
TV stations
Manual programme
Station
menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Δ ΕOOKOTV
tuning
Manual programme lets you manually tune and arrange the
stations in whatever order you desire. Also you can assign a
station name with five characters to each programme number.
AV
1.
Press the MENU button to
2.
Press the Φ / Γ button to select the Station
3.
Press the OK button to
4.
Press the Δ / Ε button to select Manual programme.
Press the OK button to display the Manual programme
5.
1
2
3
4
5
6
7
8
9
display
display
the Main
the Station
menu.
icon
menu
.
menu.
menu.
ManualOprogramme
SystemOOOOOOOOOOOOOOBG
ChannelOOOOOOOV
UHFO01
SearchOOOOOOOOOOOOO{{{
FineOOOOOOOOOOOOOOO{{{
NameOOOOOOOOOOOOOCHO01
0
AutoOAVOOOOOOOOOOOOOff
StorageOOOOOOOOOOOOO12
Δ
MENU
OK
6.
PR
VOL
7.
System. Select
theΦ/Γbutton;BG,I,DKor M.
a
TV
system
Press the Δ / Ε button to select Channel. Press the Φ / Γ
button to select
PR
AV
Press the Δ / Ε button to select
with
VOL
ΕOΦ ΓOOKOTV
V/UHF
or
select the channel number
If
CATV
as
directly
with the NUMBER buttons.
required.
8.
Press the Δ / Ε button to select Search.
9.
Press the Φ / Γ button to
commence
searching.
possible,
If
a
then
station is
found the search will stop.
10. If this station is the one required, press the Δ / Ε button to
select Storage. Select the desired programme number with
the Φ / Γ button
or
NUMBER buttons.
Any
number under 10 is
numeric '0' in front of it, i.e. '05' for 5.
11. Press the OK button to store it. The display Stored will appear.
12. To store another station repeat steps 6 to 11.
entered with
Assigning
a
a
station
name
1.
Press the Δ / Ε button to select Name.
2.
To select your desired first character, press the Γ button then
Δ button. You can use the alphabet A to Z, a blank, ., +,
and
_
the numeric 0 to 9.
10
3.
With the Ε button you can select in the opposite direction.
Select the next position by pressing the Γ button and then take
4.
your choice of the second character, and so on.
Press the Γ button to finish assigning a station name.
5.
Press the OK button to store it. The
6.
To
assign
another station
name
Stored will appear.
repeat steps 1 to 5.
display
TV stations
Setting up
Auto AV
setting
scart socket. The set is
AV
automatically
switched to AV-3 mode when
But if you want to keep
mode, set Auto AV to Off.
1. Press the Δ / Ε button to select Auto AV.
an
is
signal
input.
on
watching
Δ ΕOOKOTV
Press the Δ / Ε button to select
4.
programme number with the Φ / Γ button or NUMBER buttons.
Press the OK button. The display Stored will appear.
5.
To set another programme repeat steps 1 to 4.
Storage. Select
Press the TV/AV button to return to normal TV
the desired
viewing.
1
2
3
4
5
6
7
8
9
0
TV/AV
tuning
Normally
1.
AV
Off.
Press the Φ / Γ button to select On
3.
or
fine
Repeat
tuning
is
only necessary
'Manual programme
if
menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
TV
2.
Fine
Station
Station
If your VCR outputs a switching voltage when it is switched to
playback, select Auto AV On with the VCR connected to Euro
is poor.
reception
tuning' steps
MENU
1 to 5.
OK
ManualOprogramme
PR
SystemOOOOOOOOOOOOOOBG
ChannelOOOOOOOV
VOL
VOL
UHFO01
SearchOOOOOOOOOOOOO{{{
FineOOOOOOOOOOOOOOO{{{
PR
NameOOOOOOOOOOOOOCHO01
AutoOAVOOOOOOOOOOOOOff
StorageOOOOOOOOOOOOO12
Δ
2.
ΕOΦ ΓOOKOTV
AV
Press the Δ / Ε button to select Fine. Press the Φ / Γ button to
fine tune for the best
picture
and sound.
Storage. Select
3.
Press the Δ / Ε button to select
4.
programme number with the Φ / Γ button or NUMBER buttons.
Press the OK button. The display Stored will appear.
5.
Press the TV/AV button to return to normal TV
finely tuned programme will
during programme selection.
The
be indicated
the desired
viewing.
by yellow
number
11
TV stations
Setting up
Station
menu
Programme
Station
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Δ ΕOOKOTV
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
copy to the next programme numbers.
1.
2.
3.
4.
5.
AV
Press
Press
Press
Press
Press
the
the
the
the
the
MENU button to
display
the Main
menu.
Φ / Γ button to select the Station menu icon
OK button to display the Station menu.
.
Δ / Ε button to select Programme edit.
OK button to display the Programme edit
menu.
ProgrammeOedit
1
2
3
4
5
6
7
8
9
Γ 00OCHO05 OO05OCHO05
01OCHO01OOO06OCHO07
02OCHO02OOO07OCHO13
03OCHO03OOO08OCHO01
04OCCO30OOO09OCHO04
? Delete
? Move
Δ
0
Copy
Skip
AV
TV/AV
MENU
Deleting
1.
OK
2.
a programme
Select a programme to be deleted with the Δ / Ε
Press the RED button twice.
Φ / Γ button.
or
The selected programme is deleted and all the
programmes are shifted up one position.
PR
VOL
VOL
?
?
ΕOΦ ΓO OKOTV
3.
Press the TV/AV button to return to normal TV
following
viewing.
PR
Copying
1.
2.
a programme
Select a programme to be
Press the GREEN button.
copied
All the
3.
following programmes are shifted down
Press the TV/AV button to return to normal TV
Moving
1.
2.
3.
4.
5.
with the Δ / Ε
or
Φ / Γ button.
position.
viewing.
one
a
programme
a programme to be moved with the Δ / Ε or Φ / Γ button.
Press the YELLOW button. The selected programme is in yellow.
Move the programme to the desired programme number with
the Δ / Ε button.
The selected programme moves through the programme list in
the direction selected.
Press the YELLOW button again to release this function.
Press the TV/AV button to return to normal TV viewing.
Select
Skipping
3.
a programme
Select a programme to be skipped with the Δ / Ε or Φ / Γ button.
Press the BLUE button.
The skipped programme turns to blue.
Press the BLUE button again to release the skipped
4.
programme.
The programme returns to green and the skip is cancelled.
Press the TV/AV button to return to normal TV viewing.
1.
2.
During programme selection,
with the Δ / Ε button the
skipped
not be found. If you want to find the skipped
programme
programme directly enter the programme number with the
NUMBER buttons or select it in the programme edit or table mode.
can
12
Picture
You
adjustment
select your preferred picture setting; Standard, Game,
as you prefer. Also you can adjust picture contrast,
brightness, colour intensity, sharpness and tint (NTSC input only)
to the levels you prefer.
can
Mild, Cinema,
1.
2.
3.
Press the MENU button to display the Main menu.
Press the Φ / Γ button to select the Picture menu icon
Press the OK button to display the Picture menu.
Picture
Picture
menu
Standard
Game
Mild
Cinema
User
Convergence
.
Δ ΕOOKOTV
AV
Standard, Game, Mild, Cinema, User
1. Press the Δ / Ε button to select Standard, Game, Mild,
2.
Cinema or User.
Press the OK button.
Picture
ContrastOOOOOOOOOOO100
BrightnessOOOOOOOOOO75
ColourOOOOOOOOOOOOOO50
SharpnessOOOOOOOOOOO50
TintOOOOOOOOOOOOOOOO00
YNROOOOOOOOOOOOOOOOOff
...................
Δ
3.
4.
5.
ΕOΦ ΓOOKOTV
AV
TV/AV
Press the Δ / Ε button to select the desired picture item.
Press the Φ / Γ button to make appropriate adjustments.
Press the OK button. These picture setting is stored in User
OK
menu.
These picture settings, except for User, are temporarily stored
and if the TV switches off and then on, the adjusted level
returns to the factory preset settings.
PR
VOL
VOL
PR
Note :
a. Tint can be selected for the NTSC only.
b. The picture item YNR reduces picture noise if you select On.
To recall your preferred setting, press the PSM button until the
desired picture (Standard, Game, Mild, Cinema, User)
appears. Standard, Game, Mild and Cinema are programmed
at the factory for good picture reproduction appropriate to each
programme chacracter.
PSM
13
Picture
Picture
menu
Convergence
Picture
This function enables you to adjust the colour convergence of
screen during receiving the signals. When the set is first installed
Standard
Game
Mild
Cinema
picture may be
ghosts (red, green, blue). This problem
or
User
Convergence
Δ ΕOOKOTV
adjustment
AV
it is relocated, the
unstable with three colour
can
be solved
by adjusting
the colour convergence.
1.
Press the Δ / Ε button to select
2.
Press the OK button to
If the
display
display
Convergence.
the
Convergence mode.
ghosts, the
+ are unstable with three colour
convergence needs to be
colour
adjusted.
Convergence
TV/AV
MENU
OKOTV
AVO
OK
If the
PR
VOL
display
adjustment
is not
VOL
PR
3.
Press the OK button to
The
display
Press it
4.
(red
The
5.
PSM
again
or
the colour convergence.
ΔΕΦΓ is selected in red.
adjust
TV/AV
to select the
display
blue)
display
with the green
+ is moved to the
the Φ, Γ, Δ, Ε buttons.
If the red and blue display +
one, the
6.
OK
OK
Press the Δ / Ε and Φ / Γ buttons to
+
14
is white, colour convergence
necessary.
display
ΔΕΦΓ in blue.
superimpose
the
display
one.
left, right, up
or
down
by pressing
superimposed with the green
changed to yellow or cyan.
to return to normal TV viewing.
+ will be
Press the TV/AV button
TV/AV
are
Sound
Sound
You
adjustment
adjustment
1.
2.
3.
Sound
Sound
select your preferred sound setting; Cinema, Sports,
Music, Speech, as you prefer. Also you can adjust the sound frequency to the levels you prefer. The surround sound creates an all
around sound as in a concert hall and UBB(Ultra Bass Booster)
stress and emphasizes heavy sound and AVL(Auto Volume
Leveller) automatically keeps on an equal volume level even if you
change programmes.
can
Press the MENU button to display the Main menu.
Press the Φ / Γ button to select the Sound menu icon
Press the OK button to display the Sound menu.
menu
EqualizerOOOOOOCinema
BalanceOOOOOOOOOOOO00
UBBOOOOOOOOOOOOOOOOOn
SurroundOOOOOOOOOOOff
AVLOOOOOOOOOOOOOOOOOn
Δ
ΕOΦ ΓOOKOTV
AV
.
Equalizer
1.
2.
3.
Press the Δ / Ε button to select Equalizer.
Press the Φ / Γ button to select Cinema,
Speech or User.
Press the OK button
Sports, Music,
In case of Cinema, Sports, Music, Speech, each corresponding equalizer is displayed on the screen. Cinema, Sports,
Music and Speech are programmed at the factory for good
sound reproduction appropriate to each programme character.
Equalizer
ARC
MENU
Equalizer
+10
+10
Cinema
Cinema
Sports
Sports
0
Music
OK
0
Music
Speech
Speech
User
-10
User
0.1 0.3 1.0
-10
3.3 10K
0.1 0.3
1.0
3.3
PR
10K
VOL
Δ ΕOOKOTV
AV
Δ
ΕOΦ ΓOOKOTV
VOL
AV
PR
(Cinema, Sports, Music,
Speech)
4.
(User)
In case of User, select the sound band with the Φ / Γ button and
make appropriate sound level with the Δ / Ε button as you prefer.
Press the OK button. In case of User only, the display Stored
will appear.
Balance
1. Press the Δ / Ε button to select Balance.
2. Press the Φ / Γ button to adjust the balance level.
3. Press the OK button. The display Stored will appear.
SSM
UBB
1. Press the Δ / Ε button to select UBB.
2. Press the Φ / Γ button to select On or Off.
3. Press the OK button. The display Stored will appear.
Surround
1. Press the Δ / Ε button to select Surround.
2. Press the Φ / Γ button to select On or Off.
3. Press the OK button. The display Stored will appear.
AVL
1. Press the Δ / Ε button to select AVL.
2. Press the Φ / Γ button to select On or Off.
3. Press the OK button. The display Stored will appear.
To recall your preferred setting, press the SSM button until the
desired sound (Cinema, Sports, Music, Speech, User)
appears.
15
Sound
adjustment
Stereo/Dual
reception
When a programme is selected, the sound information for the
station appears after the programme number and station name
disappear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button. In mono reception the depth of
sound is improved. To switch back to stereo, press the I/II button
again.
selection for dual language broadcast
If a programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I II by pressing the I/II button
Language
I/II
repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loudspeakers.
DUAL I II sends a separate language to each loudspeaker.
NICAM
reception(option)
If your set is equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
2.
3.
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM MONO.
When NICAM dual is received, you can select DUAL I, DUAL
II or DUAL I II or MONO. When FM mono is selected the
display MONO appears on the screen.
Sound output selection
In AV mode, you
can
select output sound for the left and
right
loudspeakers.
Repeatedly press
L+R
:
L+L
:
R+R
16
:
the I/II button to select the sound output.
Audio signal from audio L input is sent to left loudspeaker
and audio signal from audio R input is sent to right loud-
speaker.
Audio signal
speakers.
Audio signal
speakers.
from audio L
input
is sent to left and
right
loud-
from audio R
input
is sent to left and
right
loud-
Other functions
TV and AV modes
be set for TV or AV mode. AV mode is used when a video
cassette recorder (VCR), or other equipment is connected to the set.
Inputs
can
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
2.
3.
4.
5.
Press the MENU button to display the Main menu.
Press the Φ / Γ button to select the Function menu icon
Press the OK button to display the Special function menu.
Press the Δ / Ε button to select Input.
Press the Φ / Γ button to select TV, AV1, AV2, AV3 SAV1 or
SAV2.
The five AV modes are :
AV 1 : VCR connected to the AV1 sockets on the back
AV 2 : VCR connected to the AV2 sockets on the front panel
AV 3 : VCR connected to the Euro scart socket on the back
SAV1 : VCR connected to the AUDIO and S-VIDEO sockets on
the back panel
SAV2 : VCR connected to the AUDIO and S-VIDEO sockets on
the front panel
6. Press the OK or TV/AV button.
To return to TV mode from AV mode press the Δ / Ε or NUMBER
buttons.
SpecialOfunction
Special
InputOOOOOOOOOOOOOOTV
function
AutoOsleepOOOOOOOOOff
menu
ChildOlockOOOOOOOOOff
OffOTimerOOOOOOO__:__
OnOtimerOOOOOOOO__:__
LanguageOOOOOOEnglish
Demonstration
Δ
ΕOΦ ΓOOKOTV
AV
.
TV/AV
MENU
OK
Alternatively you
can
select the TV
or
AV mode
the
by pressing
TV/AV button.
PR
VOL
Child lock
VOL
PR
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorised viewing.
1.
2.
3.
4.
5.
6.
Press the MENU button to display the Main menu.
Press the Φ / Γ button to select the Function menu icon
Press the OK button to display the Special function menu.
Press the Δ / Ε button to select Child lock.
Press the Φ / Γ button on the remote control handset to select On.
Press the OK or TV/AV button to return to normal TV viewing.
.
With the lock on, the display Child lock appears on the screen if
any button(with the exception of /I button) on the front panel is
pressed while viewing the TV.
Auto
sleep
If you select Auto
to standby mode
sleep On the set will automatically switch itself
approximately ten minutes after a TV station
stops broadcasting.
1.
2.
3.
4.
5.
6.
Press the MENU button to display the Main menu.
Press the Φ / Γ button to select the Function menu icon
Press the OK button to display the Special function menu.
Press the Δ / Ε button to select Auto sleep.
Press the Φ / Γ button on the remote control handset to select On.
Press the OK or TV/AV button to return to normal TV viewing.
.
17
Other functions
Special
function
menu
SpecialOfunction
InputOOOOOOOOOOOOOOTV
ChildOlockOOOOOOOOOff
AutoOsleepOOOOOOOOOff
OffOTimerOOOOOOO__:__
OnOtimerOOOOOOOO__:__
LanguageOOOOOOEnglish
Demonstration
Δ
ΕOΦ ΓOOKOTV
AV
POWER
Off timer
The off timer automatically switches the set to
preset time elapses.
1.
2.
3.
4.
5.
6.
standby
after the
Press the MENU button to display the Main menu.
Press the Φ / Γ button to select the Function menu icon
Press the OK button to display the Special function menu.
Press the Δ / Ε button to select Off timer.
Set the desired time period with the Φ / Γ button.
Press the OK or TV/AV button to return to normal TV viewing.
.
On timer
The set
TV/AV
MENU
OK
PR
VOL
VOL
PR
1.
2.
3.
4.
5.
6.
automatically
switches
on
after the preset time
elapses.
Press the MENU button to display the Main menu.
Press the Φ / Γ button to select the Function menu icon
Press the OK button to display the Special function menu.
Press the Δ / Ε button to select On timer.
Set the desired time period with the Φ / Γ button.
Press the OK or TV/AV button to return to normal TV viewing.
.
You can set the on/off timer from 10 minutes up to 12 hours 50
minutes in 10 minutes steps. The timer begins to count down from
the selected time period.
Note :
a.
This set must be put into standby mode with the POWER
button on the remote control to operate the on timer function.
b.
Two hours after the set is switched on by the on timer function
it will automatically switch back to standby mode unless a
button has been pressed.
c.
To view the remaining on/off time, select the Special function menu.
d.
To cancel the set on/off time, set the on/off timer to --:--.
e.
When you switch the main power off, the on/off time is reset.
Auto demonstration
Auto demonstration allows you to review all the
med in the set.
1.
2.
3.
4.
5.
Press
Press
Press
Press
Press
the
the
the
the
the
MENU button to
display
the Main
program-
menu.
Φ / Γ button to select the Function menu icon
OK button to display the Special function menu.
.
Δ / Ε button to select Demonstration.
OK button to start the demonstration.
When the demonstration reaches the last
from the beginning.
display,
To stop auto demonstration, press any button.
18
menus
it starts
again
Other functions
Calling
You
a
can
displaying
programme table
check the programmes stored in the memory
the programme table.
Displaying programme
by
table
Press the LIST button.
The programme table appears on the screen. One programme
table contains ten programmes as below.
ProgrammeOtable
Γ 00OCHO05 OOO05OCHO05
01OCHO01OOO06OCHO07
02OCHO02OOO07OCHO13
03OCHO03OOO08OCHO01
04OCCO30OOO09OCHO04
Δ
Note
ΕOΦ ΓOOKOTV
AV
1
2
3
4
5
6
7
8
9
0
TV/AV
:
a.
You may find some blue programmes.
Programme edit mode.
b.
Some programme numbers with the mark
programme table indicate there is
no
They
station
are
-----
name
skipped
in the
MENU
OK
shown in the
assigned.
PR
VOL
a programme in the programme table
Select upper or lower programme with the Δ / Ε button and left or
right programme with the Φ / Γ button. The colour of normal
Selecting
programmes is green and
skipped programme
VOL
PR
is blue.
Then press the OK button.
The set switches to the chosen programme number.
Paging through
There
are
programmes.
the pages.
Switching
a
programme table
LIST
ten programme table pages in which contain 100
Pressing
the Δ / Ε
or
Φ / Γ button repeatedly turns
back to TV mode
Press the TV/AV
or
NUMBER buttons
during programme
table
mode.
19
PIP
operation (option)
Option:
PIP is optional function,
so
that
only
the set with PIP function
can
operate.
PIP
(Picture
in
Picture) displays
a
picture
within
a
picture.
On and off
Press the PIP button to switch on the sub
Press this button again to switch it off.
Programme
selection for sub
picture.
picture
Press the PR +/- buttons. The selected programme number is
displayed at the left upper side of sub picture.
Input
mode selection for sub
picture
Press the INPUT button while the sub
main picture.
PIP
picture
remains within the
Each time this button is pressed, each input mode for the sub
is displayed as shown below at the left upper side of sub
picture
picture.
PIP:
(programme number)
SAV2
Swapping
AV1
PIP:
SAV1
between main and sub
Press the SWAP button to
Sub
PIP:
picture
exchange
PIP:
AV2
AV3
pictures
the main and sub
pictures.
size
Repeatedly press the SIZE button to select the desired sub picture
size. The sub picture appears as 1/4 size of the main picture,
followed by 1/9.
Sub
SIZE
STILL
PR
PR
POSITION
SWAP
9/4PIP
INPUT
i
picture
freeze
Press the STILL button to freeze motion of the sub
Press this button again to restore motion.
Sub
picture.
picture position change
Press the POSITION button repeatedly until desired
achieved. The sub picture moves clockwise.
Programme
position
is
scan
This function enables you to search all the stored stations on 9 or 4
sub pictures and see your favorite station by exchanging the main
and sub pictures.
Press the 9/4 PIP button. 9 sub pictures appear and search all the
stored stations.
Press this button again. At this time 4 sub pictures search them.
Press the 9/4 PIP button once more. The 9 or 4 sub pictures switch
off.
20
Teletext
Teletext is
Teletext is
optional function,
an
teletext system
a
therefore
(option)
only
a
set with the
receive the teletext broadcast.
can
free service broadcast
information
gives up-to-the-minute
programmes, share prices
by
on
most TV stations which
news,
and many other
The teletext decoder of this TV
can
weather, television
topics.
support the LIST, TOP and
FASTEXT systems. LIST
pages which are selected
number. TOP and
(standard teletext) consists of a number of
by directly entering the corresponding page
FASTEXT are more modern methods allowing quick
and easy selection of teletext information.
Switch on/off
Press the TEXT button to switch to teletext. The initial page
selected page appears on the screen.
or
last
1
2
3
4
5
6
7
8
9
0
TV/AV
TEXT
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your
selection, while the second shows the current page displayed.
Press the TEXT
or
TV/AV button to switch off teletext. The
previous
mode reappears.
PR
PR
LIST mode
If the TV is in TOP
or
FASTEXT mode, press the
M
button to
switch to LIST mode.
Page
1.
2.
selection
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong
number, you must complete the three digit number and then reenter the correct page number.
The Δ / Ε button can be used to select the
preceding
or
M
following page.
21
Teletext
Programming
(option)
a
colour button
Four teletext page numbers of your choice can be colour coded and
easily selected by pressing the corresponding coloured button on
the remote control handset.
1.
Using
2.
programme.
Wait until the page is displayed on the screen and press the
OK button. The page numbers in the colour boxes along the
the NUMBER buttons, select the page you wish to
bottom of the
1
2
3
4
5
6
7
8
9
change
screen
to "000?".
3.
Press
4.
you can
The three other coloured buttons
a
colour button to store the page number. From now on,
select this page with the same coloured button.
are
programmed
in the
same
way.
TOP mode
The
0
user
guide displays
the bottom of the
four fields-red, green, yellow and blue at
The yellow field denotes the next group
screen.
and the blue field indicates the next block.
OK
Group/block/page
1.
PR
2.
selection
With the BLUE button you can progress from block to block.
Use the YELLOW button to proceed to the next group with
automatic overflow to the next block.
PR
3.
With the GREEN button you can proceed to the next existing
page with automatic overflow to the next group. Alternatively
the Δ button can be used.
4.
The RED button
Alternatively the
permits
to return to
previous
selection.
Ε button can be used.
Direct page selection
Corresponding to the LIST teletext mode, you can select a page by
entering it as a three digit number using the NUMBER buttons in
TOP mode.
i
FASTEXT mode
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
Page
1.
selection
Press the
button to select the index page.
select the pages which are colour coded
bottom line with the same coloured buttons.
2.
You
3.
Corresponding to the LIST teletext mode,
page by entering its three digit page number
4.
The Δ / Ε button
can
along
the
you can select a
with the NUMBER
buttons in FASTEXT mode.
following page.
22
can
be used to select the
preceding
or
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
as
display concealed information,
or puzzles.
again to remove the information
Press this button
the
such
solutions of riddles
from
display.
EXPAND
(SIZE)
height text.
this button to enlarge the top half of the page.
this button again to enlarge the bottom half of
Selects double
Press
Press
page.
Press this button
again
to return to the normal
the
the TV
the
picture
on
the
screen
while
2
3
4
5
6
7
8
9
display.
UPDATE
Displays
1
waiting
0
for
will appear at the
teletext page. The display
corner of the screen. When the updated
new
top left hand
page is available then
page number.
Press this button to view the
HOLD
will
display
updated
change
to the
teletext page.
PR
PR
(STOP)
Stops the automatic page change which will occur if a
teletext page consists of 2 or more sub pages. The
number of sub pages and the sub page displayed is,
usually,
shown
on
button is
pressed
left-hand
corner
change
the
below the time. When this
screen
the stop symbol is displayed at the top
of the screen and the automatic page
is inhibited.
To continue press this button
again.
MIX
Displays
picture.
the teletext pages
To switch the TV
picture
superimposed
off press this button
on
the TV
T
X
T
again.
?
TIME
When
viewing a
display the time
screen.
TV programme, press this button to
at the top right hand corner of the
Press this button
again
to remove the
display.
In
the teletext mode, press this button to select a sub page
number. The sub page number is displayed at the
bottom of the
screen.
To hold
or
press the RED/GREEN, Δ / Ε
Press again to exit this function.
the sub page,
NUMBER buttons.
change
or
23
Connection of external
You
can
connect additional
S-VIDEO
equipment
such
equipment,
VCRs, camcorders
as
etc. to your set. Here shown may be somewhat different from your
set.
AV1
(R) AUDIO (L) VIDEO
OUT
IN
ANT IN
75Ω
AV3
3
Aerial socket
VCR
AV3
AV1
IN
OUT
S-VIDEO
R
AUDIO
1.
Connect the RF out socket of the VCR to the aerial socket
on
L
the back of the set.
VIDEO
ANT IN
75Ω
2.
Connect the aerial cable to the RF aerial in socket of the VCR.
3.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
VCR
4.
stored.
5.
S-VIDEO
Press the PLAY button
on
the VCR.
AV1
(R) AUDIO (L)
VIDEO
OUT
IN
ANT IN
75Ω
AV3
3
Audio/Video in/out sockets
VCR
1.
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to out sockets
AV2
(L/MONO)
PF-60A30
(R)
AUDIO
VIDEO
of the set.
S-VIDEO
2.
If the VCR is connected to the AV1 sockets
on
the back of the
set, press the TV/AV button to select AV1. You should select
VCR
AV2 if the VCR is connected to the AV2 sockets
AV3
AV1
IN
on
the front of
the set.
OUT
S-VIDEO
R
AUDIO
3.
L
VIDEO
Press the PLAY button
The VCR
on
the VCR.
playback picture appears
on
the
screen.
ANT N
75Ω
You
also record programmes received
out sockets.
can
by
the TV
on
video
tape via audio/video
VCR
AV2
S-VIDEO
VIDEO
L/MONO
AUD O R
Euro scart socket
VCR
1.
Connect the Euro scart socket of the VCR to the Euro scart
socket
2.
S-VIDEO
AV1
(R) AUDIO (L) VIDEO
OUT
IN
ANT IN
75Ω
AV3
3
on
the back of the set.
Press the PLAY button
on
the VCR.
If your VCR outputs a switching voltage connect to Euro scart
socket. If Auto AV : On is selected, the set will switch to AV3
mode
automatically. Otherwise, press the TV/AV button
remotecontrol handset to select AV3.
VCR
The VCR
AV3
AV1
IN
R
playback picture appears
on
the
on
the
screen.
OUT
S-VIDEO
AUDIO
L
VIDEO
ANT IN
75Ω
VCR
24
You
can
record programmes received
by
the TV
on
video tape.
Connection of external
S-video/Audio in sockets
equipment
(S-AV)
connecting a S-VHS VCR to
picture quality will be further improved.
the S-VIDEO socket, the
When
S-VIDEO
AV1
(R) AUDIO (L) VIDEO
OUT
IN
ANT IN
75Ω
AV3
1.
Connect the S-video socket of the S-VHS VCR to the S-VIDEO
socket
2.
on
the front
or
back of the set.
S-VIDEO VCR
Connect the audio cable from the S-VHS VCR to the AUDIO IN
sockets
3.
3
on
the front
or
back of the set.
If the S-VHS VCR is connected to the AV 1 sockets
on
the
back of the set, press the TV/AV button to select AV1. You
AV2
(L/MONO)
PF-60A30
(R)
AUDIO
VIDEO
S-VIDEO
should select AV2 if the S-VHS VCR is connected to the AV 2
sockets
4.
on
the front of the set.
Press the PLAY button
The VCR
on
S-VIDEO VCR
the VCR.
playback picture appears
on
the
screen.
AV3
AV1
IN
Note
OUT
S-VIDEO
R
:
AUDIO
L
VIDEO
a.
If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L (MONO) socket on the front panel of the
ANT IN
75Ω
set.
b.
If both S-VIDEO and VIDEO sockets have been connected to
the S-VHS VCR
simultaneously, only
the S-VIDEO
can
S-VIDEO VCR
be
received.
AV2
S-VIDEO
VIDEO
L/MONO
AUD O R
S-VIDEO VCR
25
Troubleshooting
check list
Symptoms
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
Check aerial
(broken lead?)
into
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
26
(VCR only)
3
Year
Guarantee
The
This
Express Guarantee
specifically covers replacement and repair of any
defective componentry
period specified
above. However,
any goods fail to
or
faults in manufacture for the
in the
Guarantee Decal
accepts
comply with
because of any reasons beyond
no
liability where
this express guarantee
control.
at no
Faulty components will be replaced by
cost to the owner. Similarly all work shop labour costs
needed to restore the goods to their original working
condition will be met by
during the guarantee
period.
This
applies
to work done in any
approved
specifically excludes travel time,
Service
product is outside the
Service Centre and
freight
if the
Centres normal service
The conditions of this
repairs
are
area.
Express guarantee only apply if
by an approved
carried out
Service Centre in New Zealand.
This guarantee is not transferrable except
as
provided
by the Consumer Guarantee Act 1993.
Express Guarantee Service
guarantees the continued supply of spare parts for a period after the date of manufacture of not less than 5
years for electrical components and 3 years for cabinet and other cosmetic components.
If there is any conflict between this
1993, the provisions of the Act shall apply.
Model No
Serial No
P/NO
:
:
:
3828VA0139F
Express
Guarantee and the
provisions
Date Purchased
:
Purchased from
:
(MP87A/B, 007W/077Q/032Z TX, 486-341C)
a
of the Consumer Guarantee Act
Download PDF