LG | RT-13LA60 | LG RT-13LA60 Owner’s Manual

LCD
Colour Television
OWNER'S MANUAL
Please read this manual
carefully
before
operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back cover and quote this inforrequire service.
mation to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828TUL277B(1EA)
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Side panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view
Mute function / Auto Demonstration
TV Swivel function
On screen language selection (option)
7
On
8
screen menus
Menu selection
up TV stations
Auto programme tuning
Manual programme tuning
Fine Tuning
Setting
Programme
9
edit
Favourite programme
Calling the programme table
Picture adjustment
Picture adjustment
14
Sound
15
adjustment
adjustment
Stereo/Dual reception
NICAM reception (option)
Sound
Sound
output selection
17
Time setting
Clock
Off time / On time
Other functions
18
TV and AV modes / Auto AV
Child lock / Auto
sleep
/
switching
Sleep timer
Teletext (option)
Switch on/off
SIMPLE text
TOP text (option)
FASTEXT mode
Special teletext functions
20
Connection of external
23
equipment
Aerial socket
DVD in sockets / DTV in sockets
Audio/Video in sockets
S-Video/Audio in sockets
Headphone
socket
Troubleshooting
2
check list
(S-VIDEO)
Installation
Power
This set
ed
operates
the label
on
on an
on
AC mains
the back
supply, the voltage is as indicatapply DC power to the set.
powercuts, please pull out the aer-
cover.
In the event of thunderstorms
or
a
Never
K
ial and mains
a.
b.
plugs.
Open the back panel cover.
After connecting the power
cord to
c.
cord to the set, connect the power
AC mains.
Attach the wire holders to the holes
panel
d.
an
as
provided
the TV back
on
shown.
Close the back
panel
c
cover.
K
b
Warning
To
prevent fire
or
shock hazard, do not expose the set to rain or
or strike the Active Matrix LCD with anything
moisture. Do not rub
hard
as
this may scratch, mar,
or
damage
the Active Matrix LCD
d
K
permanently.
Service
Never
remove
the back
cover
of the set
high voltage and other hazards. If
ly, unplug it and call your dealer.
as
this
can
the set does not
expose you to
operate proper-
Aerial
Connect the aerial cable to the socket marked +75 Ω
For the best
reception
an
on
the back.
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
the
unnecessary vibration, moisture, dust or heat. Also ensure that the
placed in a position to allow a free flow of air. Do not cover
the ventilation openings on the back cover.
The standing angle can be adjusted as shown in pictures.
set is
When you install the set to use the wall mounting bracket (optional
parts), fix it carefully so as not to drop. The set has Kensington
Security System Connector on the back panel.
Kensington Security system cable (not supplied).
Connect
the
Cleaning
the set before cleaning the face of the LCD Screen. Dust
by wiping the screen and the cabinet with a soft, clean cloth.
If the screen requires additional cleaning, use a clean, damp cloth.
Do not use liquid cleaners or aerosol cleaners.
Unplug
the set
On
Disposal
The fluorescent
lamp
used in this
product
contains
a
small amount
of mercury.
Do not dispose of this
product with general household waste.
Disposal of this product mute be carried out in accordance to
regulations of your local authority.
the
3
Location and function of controls
All the functions
can
be controlled with the remote control handset.
Some functions
can
also be
with the buttons
adjusted
on
the side
of the set.
panel
Only the
remote control handset
supplied
will
operate this
set.
Remote control handset
9
MUTE
POWER
1
Before you use the remote control handset,
teries. See the next page.
1.
I/II
2
MUTE
switches the sound
11
LIST
12
2.
TV/AV
selects the remote
4
clears the
OK
VOL
menu
switches the set
PR
3.
VOL
4.
on
from
mode.
screen.
standby.
the programme table.
Q.VIEW
returns to the
123
operating
from the
LIST
displays
PR
selects
a
previously
viewed programme.
favourite programme.
456
5.
SSM
0
D / E
(Programme Up/Down)
selects
a programme or a menu item.
switches the set on from standby.
789
7
off.
on or
Q.VIEW MENU
3
6
PSM
SLEEP
TEXT
UPDATE
TIME
SIZE
MIX
F / G
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
13
8
OK
HOLD
REVEAL
accepts your selection
6.
NUMBER BUTTONS
switches the set
14
the current mode.
displays
or
on
from
standby
or
?
INDEX
i
MODE
7.
M
SSM
(Sound Status Memory)
preferred sound setting.
recalls your
8.
SLEEP
sets the
9.
sleep
timer.
MULTIMEDIA
selects TV
clears the
or
DVD mode.
menu
switches the set
(With TELETEXT)
4
install the bat-
10
TV/AV MULTIMEDIA
5
please
from the
on
from
screen.
standby.
directly
select
a
number.
Location and function of controls
10. POWER
switches the set
on
from
standby
or
off to
standby.
11. I/II
selects the
language during dual language
output (option).
broadcast.
selects the sound
9
12. MENU
MUTE
selects
a menu.
POWER
1
10
TV/AV MULTIMEDIA
13. PSM (Picture Status
recalls your
Memory)
preferred picture setting.
14. TELETEXT BUTTONS
These buttons
are
For further details,
*
:
LIST
the 'Teletext' section.
5
or
12
PR
COLOURED BUTTONS
models)
Q.VIEW MENU
34
(option)
No function
TELETEXT
11
2
used for teletext.
see
I/II
:
These buttons
are
used for teletext
OK
VOL
VOL
PR
(only
programme edit.
123
Battery
installation
6
The remote control handset is powered by two AAA/Alkaline type batteries. To load the batteries, turn
the
remote
control
handset
polarity symbols (
marked inside the
Note
:
To avoid
damage
from
batteries if you do not plan to
extended period of time.
7
SSM
and
-
0
PSM
13
SLEEP
8
)
compartment.
possible battery leakage,
use
+
789
over
and open the battery compartment.
Install two batteries as indicated by
the
456
remove
the
the remote control handset for
an
(Without TELETEXT)
5
Location and function of controls
Side
panel
PR
6
VOL
5
9
OK
432
MENU
TV
AV
H/P
R
78
10
S-VIDEO
ON/OFF (
7.
/I)
switches the set
on
from
standby
or
Power line lives
:
even
8.
9.
TV/AV
selects TV
clears the
or
switches the set
from the
on
from
standby
)
mode.
on.
REMOTE CONTROL SENSOR
HEADPHONE SOCKET
Connect the
AV mode.
menu
R
when the power
is off.
2.
AUDIO
illuminates green when the set is switched
standby.
Note
L
panel
POWER/STANDBY INDICATOR (
illuminates red in
off to
(MONO)
AV
Back
1.
VIDEO
1
/I
ON/OFF
headphone plug
to this socket.
screen.
10. AUDIO/VIDEO IN SOCKETS (AV)
standby.
Connect the audio/video out sockets of exter-
3.
MENU
nal
selects
equipment
to these sockets.
S-VIDEO/AUDIO IN SOCKETS
a menu.
Connect the video out socket of
4.
OK
or
displays
the current
mode.
6.
(Volume Down/Up)
adjusts the volume.
adjusts menu settings.
(Programme Up/Down)
selects
a programme or a menu item.
switches the set on from standby.
6
S-VIDEO
Connects the audio out sockets of the SVIDEO VCR to the audio sockets
F / G
D / E
an
VCR to the S-VIDEO socket.
accepts your selection
5.
(S-VIDEO)
as
in AV.
Basic
operation
On and off
2.
Press the POWER, D / E, TV/AV, MULTIMEDIA or NUMBER
buttons to switch it on fully.
Press the POWER button. The set reverts to standby mode.
3.
Pull out mains
1.
plugs
to switch the set off.
Note
: If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
MUTE
Programme
selection
You
a
can
select
programme number with the D / E
or
NUMBER
POWER
TV/AV MULTIMEDIA I/II
buttons.
Q.VIEW MENU
Volume
adjustment
Press the F / G button to
adjust
the volume.
PR
Quick view
Press the Q.VIEW button to view the last programme you
were
OK
VOL
VOL
watching.
PR
Note
This function works only when Favourite programme is
set to Off. Otherwise each press of this button will select a stored
favourite programme.
:
123
Mute function
Press the MUTE button. The sound is switched off and the
456
display
W appears.
You
can
cancel it
by pressing
the
MUTE,
F /
G, SSM, I/II
button.
Auto Demonstration
789
SSM
0
To review all the menus programmed in the set, press the OK button of the side panel controls for about 10 seconds. To stop auto
demonstration, press any button of the side panel controls or the
POWER button of the remote control.
TV Swivel function
You can manually turn TV set at left or right direction by 30
so that the watching degree is suitable for your position.
degrees,
?
i
On
screen
language
selection
The
menu can be displayed on the
guage. First select your language.
1.
Repeatedly press
2.
Press the
Press the
Press the
Press the
All the on
Press the
3.
4.
5.
6.
screen
in your desired lan-
the MENU button to select the
D / E button to select
M
(option)
Special
menu.
Language.
OK button.
D / E button to select your desired
language.
OK button.
displays will appear in the selected language.
TV/AV button to return to normal TV viewing.
screen
7
On
screen menus
The
an
dialogue
operator
also
between you and your set takes place on screen with
The buttons required for the operating steps are
menu.
displayed.
Menu selection
press the MENU button to display each menu.
Press the D / E button to select a menu item.
The selected menu item changes from white to red.
3.
Press the F / G button to change the setting of a menu item
OK button to display the sub menu.
Note :
a.
In the teletext mode, menus are not displayed.
b.
On some models, the Language will not be display.
1.
2.
Repeatedly
MENU
PR
AutoOprogramme
ManualOprogramme
ProgrammeOedit
FavouriteOprogramme
System
StorageOfrom
()OOKOMENU
()O}{OMENU
BG
1
Start
OK
VOL
VOL
PR
Station
Contrast
menu
100
95
85
80
Brightness
Colour
Sharpness
Storage
System
Channel
V
Fine
{{{
Search
Name
()O}{OOKOMENU
1
BG
1
UHF
CO01
()O}{O0-9OOKOMENU
Picture
Equalizer
Balance
AVL
menu
0
Off
00O CO 1DOO 05O SO 69
01O CO 03 O06O SO 17
02O CO 12OO 07O SO 22
03O SO 66OO 08O CO 09
04O SO 67OO 09O CO 11
Delete
Move
()OOKOMENU
menu
?
Off
Clock
-i-i:i-i-i-i:i-i-
OffOtime
M
Skip
()O}{OOKOMENU
Sound
i
Copy
Off
OnOtime
-i-i:i-i-
Pr.
1
VOL. 30
Off
()O}{OOKOMENU
Input
AutoOsleep
Language
---
-
-
--
---
-
-
--
---
-
-
--
---
-
-
--
---
-
-
()O}{OOKOMENU
Time
ChildOlock
--
menu
TV
Off
Off
Flat
Music
Movie
Speech
User
0.1O0.5O1.5O5.0O10OKHz
()O}{OMENU
Special
TV programme
8
()OMENU
menu
or
Setting up
TV stations
Up to 100 TV stations can be stored in this set by programme numbers
(0 to 99). Once you have preset the stations, you will be able to use
the D / E
or
NUMBER buttons to
Stations
grammed.
can
be tuned
the stations you have proautomatic or manual modes.
scan
using
Station
Menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
FavouriteOprogramme
()OOKOMENU
Auto programme
All stations that
can
ommended that you
tuning
be received
use
are
stored
auto programme
by this method. It
during installation
is
rec-
of this
set.
the MENU button to select the Station
1.
Repeatedly press
2.
Press the D / E button to select Auto programme.
menu.
TV/AV MULTIMEDIA
MENU
BG
1
System
StorageOfrom
Start
PR
()O}{OMENU
OK
3.
4.
Press the OK button to
display the Auto programme menu.
Press the D / E button to select System. Select a TV system
with the F / G button;
BG
I
DK
M
5.
6.
(Asia/New Zealand/M.East/Africa/Australia)
(Hong Kong/South Africa)
: (East Europe/China/Africa/CIS)
: (USA/Korea/Philippines) (option)
Press the D / E button to select Storage from.
VOL
VOL
PR
:
:
123
456
beginning programme number with the F / G button
NUMBER buttons. Any number under 10 is entered with a
Select the
or
numeric '0' in front of
it, i.e. '05' for
5.
7.
Press the D / E button to select Start.
8.
Press the OK button to
begin
auto
System
StorageOfrom
Start
789
0
programming.
BG
1
CO15
2%
1
MENU
?
All receivable stations
are
stored.
i
M
In Australia, if no station name can be assigned to a
folstation, the channel number is assigned and stored as
lowed by a number see 'Assigning a station name' section to
Option:
-----
the station
assign
To
name.
programming, press the MENU button.
programming is completed, the Programme edit
appears on the screen. See the 'Programme edit' section
stop
auto
When auto
menu
to edit the stored programme.
9.
Press the TV/AV button to return to normal TV
viewing.
9
Setting up
Station
Menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
FavouriteOprogramme
Manual programme
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name
()OOKOMENU
TV stations
1.
2.
3.
with five characters to each programme number.
press the MENU button to select the Station menu.
Press the D / E button to select Manual programme.
Press the OK button to display the Manual programme
Repeatedly
menu.
TV/AV MULTIMEDIA
Storage
System
Channel
V
1
BG
1
UHF
Fine
{{{
Search
Name
MENU
CO01
()O}{O0-9OOKOMENU
4.
PR
5.
OK
VOL
VOL
PR
6.
7.
8.
123
with a numeric '0' in front of it, i.e. '05' for 5.
Press the OK button.
Press the D / E button to select System.
a TV system with the F / G button
Select
on
the
System pull-
down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
456
M
789
:
(USA/Korea/Philippines) (option)
Press the OK button.
10. Press the D / E button to select Channel.
11. Press the F / G button to select V/UHF
9.
0
?
i
Press the D / E button to select Storage.
Select the desired programme number (0 to 99) with the F / G
button or NUMBER buttons. Any number under 10 is entered
or Cable on the
Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' in
front of it, i.e. '05' for 5.
12. Press the OK button.
13. Press the D / E button to select Search.
14. Press the F / G button to commence searching on the Search
pull-down menu. If a station is found the search will stop.
M
Storage
System
Channel
V
1
BG
1
UHF
Fine
Search
Name
{{{
CO01
Stored
15. Press the OK button to store it. The
16. To store another
display
station, repeat steps 4
Stored will appear.
to 15.
17. Press the TV/AV button to return to normal TV
10
viewing.
TV stations
Setting up
Assigning a station name
1.
Repeat the 'Manual programme tuning' steps
ProgrammeOedit
FavouriteOprogramme
3.
Press the D / E button to select Name.
Press the G button and then D / E button to
4.
the numeric 0 to 9 and the
Select the next position by
make your choice of the second character, and
Press the OK button.
so on.
5.
6.
Press the TV/AV button to return to normal TV
viewing.
2.
Fine
1.
3.
use a
blank,
+, -,
()OOKOMENU
G button and then
TV/AV MULTIMEDIA
tuning
Normally
2.
alphabet A to Z.
pressing the F /
fine
tuning
Station
Menu
AutoOprogramme
ManualOprogramme
1 to 3.
is
only
necessary if
reception
is poor.
MENU
the 'Manual programme tuning' steps 1 to 3.
Press the D / E button to select Fine.
Press the F / G button to fine tune for the best picture and
Repeat
PR
sound.
OK
Storage
System
Channel
V
UHF
Fine
Search
Name
VOL
1
BG
1
PR
{{{
CO01
()O}{OOKOMENU
4.
5.
123
Press the OK button.
Press the TV/AV button to return to normal TV
The
ber
VOL
finely tuned programme will be
during programme selection.
indicated
viewing.
by a yellow
456
num-
789
0
?
i
M
11
TV stations
Setting up
Station
Menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
FavouriteOprogramme
Programme
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
()OOKOMENU
1.
2.
3.
the MENU button to select the Station menu.
Press the D / E button to select Programme edit.
Press the OK button to display the Programme edit menu.
Repeatedly press
0 0--
--
-
O05O SO 69
01O CO 03OO 06O SO 17
02O CO 12OO 07O SO 22
03O SO 66OO 08O CO 09
04O SO 67OO 09O CO 11
TV/AV MULTIMEDIA
Delete
Move
Copy
Skip
()O}{OOKOMENU
LIST
Q.VIEW MENU
Deleting
1.
2.
The
PR
programme
selected
grammes
OK
VOL
a
Select a programme to be deleted with the D / E
Press the RED button twice.
are
programme is deleted,
shifted up one position.
VOL
0 0--
--
-
all
or
the
F / G button.
following pro-
O05O SO 69
01O CO 03OO 06O SO 17
PR
02O CO 12OO 07O SO 22
03O SO 66OO 08O CO 09
04O SO 67OO 09O CO 11
Delete
123
MENU
456
Copying
1.
2.
789
1.
2.
3.
programme
programme to be copied with the D / E
Press the GREEN button.
All the following programmes are shifted down
Moving
0
a
Select
a
a
or
F / G button.
one
position.
programme
Select a programme to be moved with the D / E or F / G button.
Press the YELLOW button.
Move the programme to the desired programme number with
theD/EorF/Gbutton.
4.
Press the YELLOW button
0 0--
--
again
-
to release this function.
O05O SO 69
01O CO 03OO 06O SO 17
02O CO 12OO 07O SO 22
03O SO 66OO 08O CO 09
?
04O SO 67OO 09O CO 11
Move0Off
i
M
()O}{OMENU
Skipping
1.
2.
3.
a
programme number
Select a programme number to be skipped with the D / E or F / G
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped pro-
gramme.
When a programme number is skipped it means that you will be
unable to select it using the D / E button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Press the TV/AV button to return to normal TV
12
viewing.
Setting up
TV stations
Favourite programme
This function lets you select your favourite programmes
1.
2.
3.
Station
Menu
AutoOprogramme
ManualOprogramme
directly.
the MENU button to select the Station menu.
Press the D / E button to select Favourite programme.
Press the OK button to display the Favourite programme
ProgrammeOedit
FavouriteOprogramme
Repeatedly press
()OOKOMENU
menu.
Off
--
--
--
-
--
--
--
-
--
--
--
-
--
--
--
-
--
--
--
-
TV/AV MULTIMEDIA
TV/PC
()O}{OOKOMENU
6.
Press the F / G button to select On or Off.
Press the D / E button to select
-----.
Select a desired programme with the F / G button
7.
buttons. Any number under 10 is entered with a numeric '0' in
front of it, i.e. '05' for 5.
To store another programme, repeat steps 5 to 6.
8.
You can store up to 5 programmes.
Press the TV/AV button to return to normal TV
4.
5.
LIST
Q.VIEW MENU
--
Repeatedly press
or
NUMBER
PR
OK
viewing.
VOL
VOL
PR
the Q.VIEW button to select stored favourite pro-
grammes.
Calling
the programme table
123
You can check the programmes stored in the memory
the programme table.
Displaying programme
by displaying
table
Press the LIST button to display the Programme table menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
00--
--
-
456
789
0
OO05O SO 69
01O CO 03OO 06O SO 17
02O CO 12OO 07O SO 22
03O SO 66OO 08O CO 09
04O SO 67OO 09O CO 11
()O}{OOKOMENU
Note
a.
b.
:
You may find some blue programmes. They have been set up to
be skipped by auto programming or in the programme edit mode.
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
?
i
M
a programme in the programme table
Select a programme with the D / E or F / G button.
Then press the OK button.
The set switches to the chosen programme number.
Selecting
Paging through
There
are
a
programme table
10 programme table pages in which contain 100 pro-
grammes.
Pressing the D / E
or
F / G button
repeatedly
Press the TV/AV button to return to normal TV
turns the pages.
viewing.
13
Picture
Picture
Menu
Contrast
100
95
85
80
Brightness
Colour
Sharpness
Picture
You
adjustment
adjust picture contrast, brightness, colour intensity, sharp(NTSC input only) to the levels you prefer.
can
ness
adjustment
and tint
()O}{OOKOMENU
1.
2.
3.
press the MENU button to select the Picture menu.
Press the D / E button to select the desired picture item.
Press the F / G button to make appropriate adjustments.
Repeatedly
Contrast
Brightness
Colour
Sharpness
TV/AV MULTIMEDIA
TV/PC
85
95
85
80
MENU
4.
Press the OK button to store it for the
The
display
picture
User.
Stored appears.
PR
Press the TV/AV button to return to normal TV
OK
VOL
VOL
PR
?
14
a desired picture (Dynamic, Standard,
User) with PSM button on the remote control. The
picture Dynamic, Standard, Mild and Game are programmed
for optimum picture reproduction at the factory and cannot be
changed.
can
also recall
Mild, Game
PSM
i
You
M
viewing.
or
Sound
Sound
You
adjustment
adjustment
Equalizer
Balance
AVL
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of equalizer,
balance. If you switch AVL to on, the set automatically keeps on an
Sound
Menu
0
Off
can
Speech
equal
1.
2.
volume level
even
if you
change
()OOKOMENU
programmes.
press the MENU button to select the Sound menu.
Press the D / E button to select the desired sound item;
Equalizer, Balance or AVL
Repeatedly
.
3.
Press the F / G button to make desired adjustment.
Press the OK button in Equalizer to set the Equalizer User.
TV/AV MULTIMEDIA
TV/PC
MENU
Flat
Music
Movie
Speech
User
0.1O0.5O1.5O5.0O10OKHz
()OMENU
PR
OK
Press the D / E button to select your
Music, Movie, Speech or User.
To set the Equalizer User,
a.
preferred setting
;
Flat,
VOL
VOL
PR
Select User by pressing the D / E button.
a sound band by pressing the F / G button.
b. Select
Select appropriate sound level with the D / E button.
d. Press the OK button to store it for the sound User.
The display Stored appears.
c.
Press the TV/AV button to return to normal TV
You
can
also recall
a
desired sound
viewing.
setting (Flat, Music, Movie,
SSM
Speech or User) with SSM button on the remote control. The sound
settings Flat, Music, Movie and Speech are programmed for optimum sound reproduction at the factory and cannot be changed.
?
i
M
15
Sound
adjustment
Stereo/Dual
reception
When a programme is selected, the sound information for the station appears after the programme number and station name disap-
pear.
I/II
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button twice again.
selection for dual language broadcast
programme is received in two languages (dual language), you
can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II
button repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
Language
If
a
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
If your set is
with the receiver for NICAM reception, the
NICAM
high quality
(Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
2.
3.
equipped
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
Sound output selection
In AV mode, you
can
select
output sound for the left and right loud-
speakers.
L+R
:
press the I/II button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
L+L
:
Audio
Repeatedly
R+R
16
:
speaker.
signal
speakers.
Audio signal
speakers.
from audio L
input
is sent to left and
right
loud-
from audio R
input
is sent to left and
right
loud-
Time
setting
Clock
Clock
Time
Menu
-i-i:i-i-i-i:i-i-
OffOtime
Off
You must set the time
1.
2.
3.
correctly
before
using
on/off time function.
press the MENU button to select the Time menu.
Press the D / E button to select Clock.
Press the G button and then press the F / G button to select
Repeatedly
OnOtime
-i-i:i-i-
Pr.
1
VOL. 30
Off
()O}{OOKOMENU
the desired timer item
4.
Make desired
(hour, minutes).
adjustment with the D /
E button
on
the desired
timer item.
5.
6.
Press the OK button.
Press the TV/AV button to return to normal TV
TV/AV MULTIMEDIA
TV/PC
viewing.
MENU
Off time
The off timer
automatically
switches the set to
standby
at the pre-
set time.
1.
2.
3.
4.
5.
6.
7.
PR
press the MENU button to select the Time menu.
Press the D / E button to select Off time.
Press the G button and then press the F / G button to select
the desired timer item (hour, minutes).
Make desired adjustment with the D / E button on the desired
timer item.
Press the G button and then D / E button to select On or Off.
Press the OK button.
Press the TV/AV button to return to normal TV viewing.
Repeatedly
OK
VOL
VOL
PR
123
456
789
On time
0
The on timer automatically switches on at the
desired programme number and volume.
preset time with
3.
press the MENU button to select the Time menu.
Press the D / E button to select On time.
Press the G button and then press the F / G button to select
4.
the desired timer item; --: --, Pr. or VOL..
Make desired adjustment with the D / E button
1.
2.
Repeatedly
on
the desired
?
timer item.
6.
Press the G button and then D / E button to select On
Press the OK button.
7.
Press the TV/AV button to return to normal TV
5.
or
Off.
i
M
viewing.
Note :
a.
In the event of power interruption (disconnection or power failure), the clock must be reset.
b.
Two hours after the set is switched on by the on time function it
will automatically switch back to standby mode unless a button
has been pressed.
c.
Once the on or off time is set, these functions operate daily at
the preset time.
17
Other functions
Special
TV
Off
Off
Input
Menu
ChildOlock
AutoOsleep
Language
TV and AV modes
Inputs
be set for TV
can
cassette recorder
set.
()O}{OMENU
or
(VCR),
AV mode. AV mode is used when a video
or other equipment is connected to the
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
2.
3.
TV/AV MULTIMEDIA
press the MENU button to select the Special menu.
Press the D / E button to select Input.
Press the F / G button to select TV, AV S-Video or
Repeatedly
,
Component.
The three AV modes
MENU
AV1
:
are :
VCR connected to the AV socket of the set
S-Video: S-VIDEO VCR connected to the S-Video sockets of
the set
Component
PR
4.
VOL
:
DVD connected to the DVD/DTV IN socket of the
set.
VOL
Repeatedly
ing.
press the TV/AV button to return to normal TV view-
PR
Alternatively
you
TV/AV button.
can
select the TV
or
AV mode
In AV mode, to return to TV mode, press the D / E
123
by pressing
or
the
NUMBER but-
tons.
456
Child lock
789
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
0
SLEEP
3.
press the MENU button to select the Special menu.
Press the D / E button to select Child lock.
Press the F / G button on the remote control handset to select On.
4.
Press the TV/AV button to return to normal TV
1.
2.
?
i
18
M
Repeatedly
viewing.
With the lock on, the display Child lock on appears on the screen
if any button on the side panel is pressed while viewing the TV.
Note : The display Child lock on will not appears on the screen if
any button on the side panel is pressed while displaying the menus.
Other functions
Auto
sleep
If you select Auto sleep On the set will automatically switch itself
to standby mode approximately ten minutes after a TV station stops
broadcasting.
1.
2.
3.
4.
Special
TV
Off
Off
Input
ChildOlock
AutoOsleep
Language
Menu
()O}{OMENU
press the MENU button to select the Special
Press the D / E button to select Auto sleep.
Press the F / G button to select On.
Press the TV/AV button to return to normal TV viewing.
Repeatedly
menu.
TV/AV MULTIMEDIA
Sleep
timer
MENU
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the
preset time has elapsed.
Press the SLEEP button to select the number of minutes. The dis0 will appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180 and 240. The timer begins
to count down from the number
of minutes selected.
PR
OK
VOL
VOL
PR
Note :
a.
To view the
remaining sleep time,
press the SLEEP button
once.
b.
c.
sleep time, repeatedly press the SLEEP button
until the display
0 appears.
In the event of power interruption (disconnection or power failure), the set releases the preset sleep time.
123
To cancel the
456
789
SSM
SLEEP
0
PSM
TEXT
?
MODE
i
19
Teletext
Teletext
(or
(option)
TOP
with the teletext
Teletext is
a
text)
is
system
an
can
optional function,
free service broadcast
up-to-the-minute
grammes, share
information
prices
therefore
only
a
set
receive the teletext broadcast.
on
by
most TV stations which
news,
and many other
gives
weather, television pro-
topics.
The teletext decoder of this TV
FASTEXT
can support the SIMPLE, TOP and
systems. SIMPLE (standard teletext) consists of a num-
ber of pages which are selected by directly
page number. TOP and FASTEXT
sponding
TV/AV MULTIMEDIA
methods
allowing quick
entering
are
the
more
corre-
modern
and easy selection of teletext information.
Switch on/off
Press the TEXT button to switch to teletext. The initial page
page appears on the screen.
PR
or
last
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selec-
tion, while the second shows the
Press the TEXT
PR
or
current page displayed.
TV/AV button to switch off teletext. The
previous
mode reappears.
123
SIMPLE text
456
selection
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then re-
Page
1.
789
0
2.
TEXT
enter the correct page number.
The D / E button can be used to select the
lowing
preceding
or
fol-
page.
Programming
a
colour button in LIST mode
or FASTEXT mode, press the
If the TV is in SIMPLE text, TOP text
M
button to switch to LIST mode.
?
MODE
M
Four teletext page numbers of your choice can be colour coded and
selected by pressing the corresponding coloured button on
easily
the remote control handset.
1.
Press
a
2.
Using
the NUMBER buttons, select the page you wish to pro-
3.
4.
20
coloured button.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number with blinking once. From now on, you
can select this page with the same coloured button.
The three other coloured buttons are programmed in this way.
Teletext
TOP text
The
user
(option)
(option)
guide displays
the bottom of the
four fields-red, green, yellow and blue at
The yellow field denotes the next group
screen.
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with automatic overflow to the next block.
3.
With the green button you can proceed to the next
page with automatic overflow to the next group.
Alternatively
4.
The
red
the D button
button
Alternatively
can
to
permits
the E button
can
existing
be used.
return
to
previous
selection.
be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
PR
TOP mode.
PR
123
FASTEXT mode
456
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
Page
789
selection
1.
Press the
2.
You
can
0
button to select the index page.
select the pages which are colour coded
i
tom line with the
same
along
the bot-
coloured buttons.
TIME
3.
Corresponding to the SIMPLE
page by entering its three digit
4.
The D / E button
teletext mode, you can select a
page number with the NUMBER
buttons in FASTEXT mode.
lowing
page.
can
be used to select the
preceding
or
folINDEX
M
21
Teletext
Special
?
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
page.
Press this button
again
half of the page.
the bottom half of the
to return to the normal
display.
UPDATE
PR
Displays
the TV
picture
on
the
screen
while
waiting
for the
new
teletext page. The display
will appear at the top left hand
corner of the screen. When the updated page is available then
will change to the page number.
display
Press this button to view the updated teletext page.
PR
123
HOLD
Stops
456
the automatic page
text page consists of 2
change
which will
occur
if
a
tele-
sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
789
or more
stop symbol is displayed
0
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
screen
UPDATE
TIME
MIX
SIZE
MIX
Displays
the teletext pages superimposed on the TV
picture off press this button again.
picture.
To switch the TV
HOLD
REVEAL
?
TIME
M
When
viewing
the time at the
button
again
TV programme, press this button to display
top right hand corner of the screen. Press this
a
to
remove
the
display.
In the teletext mode,
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the RED/GREEN, D
NUMBER buttons.
change
Press
22
again
to exit this function.
/ E
or
Connection of external
You
can
connect additional
etc. to your set.
Examples
equipment,
are
such
as
equipment
VCRs, camcorders
shown below.
Aerial socket
1.
Connect the RF out socket of the VCR to the aerial socket of
the set.
2.
Connect the aerial cable to the RF aerial in socket of the VCR.
3.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
4.
VCR
stored.
5.
Press the PLAY button
on
the VCR.
DVD in sockets
1.
Connect the DVD
Y PB
or
PR)
output sockets (Y Cb Cr, Y Pb Pr, Y B-Y R-Y
of the DVD to the DVD/DTV IN sockets
(Y
PB
PR)
of
the set.
2.
Connect the audio cable from the DVD to the AUDIO sockets
of the set.
3.
Press the TV/AV
or
MULTIMEDIA button to select COMPO-
DVD
NENT.
4.
Press the PLAY button
The DVD
on
playback picture
the DVD.
appears
on
the
screen.
DTV in sockets
1.
Connect the SET TOP
PB
2.
PR)
outputs
to the DVD/DTV IN sockets
(Y
of the set.
Connect the audio cable from the SET TOP to the AUDIO sockets of the set.
3.
Press the TV/AV
or
MULTIMEDIA button to select COMPODTV Receiver
NENT.
Audio/Video in sockets
1.
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set.
2.
Press the TV/AV button to select AV
3.
Press the PLAY button
The VCR
on
playback picture
.
the VCR.
appears
on
the
screen.
VCR
If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
Note
:
23
Connection of external
equipment
S-Video/Audio in sockets
When
connecting
picture quality will
1.
an
(S-VIDEO)
S-VIDEO VCR to the S-VIDEO socket, the
be further
improved.
Connect the S-Video socket of the VCR to the S-VIDEO socket of the set.
S-VIDEO VCR
2.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets of the set.
3.
Select S-Video
4.
Press the PLAY button
The VCR
Insert the
on
playback picture
Headphone
can
by pressing
the TV/AV button
repeatedly.
the VCR.
appears
on
the
screen.
socket
headphone plug to the headphone socket of the set. You
through the headphone. To adjust the head-
listen to the sound
phone volume,
press the F / G button. If you press the MUTE but-
ton, the sound from the headphone is switched off.
24
Notes
Notes
Troubleshooting
check list
Symptoms
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
27
Download PDF

advertising