LG | RT-15LA31 | LG RT-15LA31 Owner’s Manual

LCD
Colour Television
OWNER'S MANUAL
Please read this manual
carefully
before
operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back cover and quote this inforrequire service.
mation to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828VA0334D
(ML012A,
061U/082L TX,
486-395A)
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Side panel / Back panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view
Mute function / Auto Demonstration
On screen language selection (option)
7
On
8
screen menus
Menu selection
TV stations
Auto programme tuning
Manual programme tuning
Fine Tuning
Programme edit
Calling the programme table
9
Setting up
Picture adjustment
PSM (Picture Status
DRP (Digital Reality
Picture adjustment
14
Memory)
Picture)
Sound adjustment
SSM (Sound Status Memory)
Sound adjustment / Stereo/Dual reception
NICAM reception (option) / Sound output selection
15
Other functions
TV, AV and PC modes
Child lock / Auto sleep /
17
Sleep
timer
Teletext (option)
Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions
19
Connection of external equipment
Aerial socket
Component in sockets
Audio/Video in sockets
S-Video/Audio in sockets (S-Video)
Headphone socket
22
Connection of PC
PC in socket (D-Sub
Menu selection
PC Setup
24
jack)
PIP operation
PIP operation / On and off
Input mode selection for sub picture
Programme selection for sub picture
Sub picture size
Sub picture position change
Troubleshooting
2
check list
27
Back
cover
Installation
Power
This set
operates
DC
on a
supply provided by
the AC-DC
adaptor,
a
PR
the voltage is as indicated on the label on the back cover. Use only
the AC-DC adaptor supplied with the set and never apply an AC
VOL
OKMENU
TV IDEO
mains to the set
directly. The AC-DC adaptor operates on an AC
mains supply, the voltage is as indicated on the label of the AC-DC
adaptor.
a. Open the back panel cover.
b. Connect the DC plug of the AC-DC adaptor to the 12V socket of
ON OF
the set.
c.
d.
e.
Connect the AC-DC
adaptor and it's power cord.
Connect the power cord to an AC mains.
Close the back panel cover.
In the event of thunderstorms
PR
VOL
powercuts, please pull
or
out the
mains
plug of the AC-DC adaptor and the aerial plug. Do not allow
anything to rest upon or roll over the power cord, and do not place
the monitor where the power cord is
subject
to
OK
EN
U
TV
VID
EO
O
N OF
damage.
c
Warning
b
d
To prevent fire or shock hazard, do not expose the set to rain or
moisture. Do not rub or strike the Active Matrix LCD with anything
hard
as
this may
permanently.
The working
scratch,
mar,
damage
or
the Active Matrix LCD
life of this set is 7 years since the date of
delivery
to
consumer.
Service
Never
remove
the back
cover
of the set
high voltage and other hazards. If
ly, unplug it and call your dealer.
as
this
can
the set does not
expose you to
operate proper-
Aerial
Connect the aerial cable to the socket marked +75 Ω on the back.
For the best reception an outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
the
set is
placed
in
a
position
to allow
a
the ventilation openings on the back
The standing angle can be adjusted
free flow of air. Do not
cover
cover.
as
shown in
pictures.
Cleaning
Unplug
the set before
cleaning
the face of the LCD Screen. Dust
the set by wiping the screen and the cabinet with a soft, clean cloth.
If the screen requires additional cleaning, use a clean, damp cloth.
Do not
use
liquid
cleaners
or
aerosol cleaners.
3
Location and function of controls
All the functions
can
be controlled with the remote control handset.
Some functions
can
also be
panel
adjusted
with the buttons
on
the side
of the set.
Remote control handset
POWER
MUTE
1
1
2
Before you use the remote control
10 teries. See the next page.
1.
3
POWER
switches the set
2
4
5
6
7
8
9
2.
0
i
4
11 3.
PR+
PR
VOL
4.
on
from
standby
and selects
a
programme.
MENU
(or INDEX)
selects
a menu.
selects
an
index page in the teletext mode
(only
TELETEXT
Δ / Ε (Programme Up/Down)
selects a programme or a menu item.
on from standby.
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
Φ / Γ
TEXT/MIX
SIZE
HOLD
POSITION
TIME
REVEAL
I/II
PIP
SLEEP
M
PSM
12
OK
accepts your selection
or
displays
the current mode.
14
5.
SSM
8
Q.VIEW
returns to the
previously
viewed programme.
12
6.
TELETEXT BUTTONS (option)
These buttons are used for teletext.
For further
7.
I/II
details,
see
the 'Teletext' section.
(option)
selects the
language during dual language
output (option).
selects the sound
8.
PSM
(Picture Status Memory)
preferred picture setting.
recalls your
9.
4
standby.
switches the set
13
7
9
or
models).
LIST/
INPUT
PR
5
6
off to
standby
VOL
OK
Q.VIEW
from
NUMBER BUTTONS
switches the set
12
PR-
on
TV/AV/PC
MENU/INDEX
3
handset, please install the bat-
SSM (Sound Status Memory)
recalls your preferred sound setting.
broadcast.
Location and function of controls
10. MUTE
switches the sound
off.
on or
11. TV/AV/PC
selects
TV, AV
clears the
or
menu
switches the set
PC monitor mode.
from the
from
on
screen.
standby.
POWER
12. PIP BUTTONS
(option) (PC
mode
only)
PIP
switches the sub
picture
on or
MUTE
10
1
off.
1
2
3
4
5
6
7
8
PR +/selects
a
programme for the sub
picture.
2
INPUT
selects the
input
mode for the sub
picture.
POSITION
9
TV/AV/PC
MENU
relocates the sub
in
picture
up/down
or
left/right
0
3
direction.
11
12
13. LIST
PR-
displays
PR+
PR
the programme table.
4
VOL
VOL
OK
14. SLEEP
sets the
sleep
Q.VIEW
timer.
LIST/
INPUT
PR
13
5
Note
:
In teletext
mode, the PR+/-, Q.VIEW and LIST buttons
are
used for teletext functions.
POSITION
Battery
12
installation
PIP
I/II
SLEEP
14
7
The remote control handset is
To load the
batteries,
powered by
two AAA
type batteries.
turn the remote control handset
over
and
open the battery compartment. Install two batteries as indicated by
the polarity symbols ( + and
) marked inside the compartment.
PSM
SSM
8
9
12
-
Note
:
To avoid
damage
from
batteries if you do not plan to
extended period of time.
possible battery leakage,
use
remove
the
the remote control handset for
an
5
Location and function of controls
Side
panel
RT-15LA31 series
PR
6
VOL
5
Back
panel
OK
7
MENUTV/APC
432
ON/ F
1
H/P
AV
S-VIDEO
VIDEO
(MONO)
L
AUDIO
R
8
1.
MAIN POWER
(ON/OFF)
switches the set
on or
7.
off.
9
10
POWER/STANDBY INDICATOR
illuminates
brightly
(r)
when the set is in
standby
mode.
2.
TV/AV/PC
selects
dims when the set is switched
TV, DVD, AV
clears the
menu
switches the set
3.
or
from the
on
from
screen.
8.
REMOTE CONTROL SENSOR
9.
HEADPHONE SOCKET
standby.
MENU
Connect the
selects
headphone plug
to this socket.
a menu.
10. AUDIO/VIDEO IN SOCKETS
4.
on.
PC monitor mode.
OK
(AV)
Connect the audio/video out sockets of exter-
accepts your selection
or
displays
the current
mode.
nal
equipment
to these sockets.
S-VIDEO/AUDIO IN SOCKETS
5.
Φ / Γ
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
Connect the video out socket of
(S-Video)
an
Connects the audio out sockets of the SVIDEO VCR to the audio sockets
6.
Δ / Ε
(Programme Up/Down)
selects
a programme or a menu item.
switches the set on from standby.
6
S-VIDEO
VCR to the S-VIDEO socket.
as
in AV.
Basic
operation
On and off
1.
2.
3.
4.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, Δ / Ε,
TV/AV/PC or NUMBER buttons on the remote control handset
to switch it on fully.
Press the POWER button on the remote control handset.
The set reverts to standby mode.
Press the main power button again to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme
selection
You can select
buttons.
a
Volume
programme number with the Δ / Ε
or
MUTE
1
2
3
4
5
6
7
8
NUMBER
adjustment
Press the Φ / Γ button to
POWER
9
TV/AV/PC
MENU/INDEX
adjust
the volume.
0
Quick view
PR
Press the Q.VIEW button to view the last programme you
were
watching.
VOL
Q.VIEW
Mute function
Press the MUTE button. The sound is switched off and the
VOL
OK
PR
display
W appears.
You
can
cancel it
by pressing
the
MUTE,
Φ /
Γ, SSM, I/II button.
I/II
Auto Demonstration
To review all the
programmed in the set, press the OK butcontrol for about 10 seconds. To stop auto
demonstration, press any button of the side panel control and
POWER button of the remote control.
ton of the side
On
screen
menus
SSM
panel
language
selection
The menu can be displayed
First select your language.
on
the
(option)
screen
in desired
language.
1.
2.
3.
Press the MENU button to select the Station menu.
Press the Γ button and then Δ / Ε button to select LANGUAGE.
Press the Γ button and then Δ / Ε button to select your desired
4.
All the on screen displays will appear in the selected language.
Press the OK or Φ button to select the Station menu.
Press the TV/AV/PC button to return to normal TV viewing.
language.
7
On
screen menus
Menu selection
1.
2.
3.
press the MENU button to display each menu.
Press the Γ button and then Δ / Ε button to select a menu item.
Press the Γ button to display the sub menu or the pull-down
Repeatedly
menu.
4.
Change
the
setting
of
an
item in the sub
or
pull-down
menu
with
Φ/ΓorΔ/Ε.
You
can move
to the
Φ button and to
Γ button.
higher
move
level
menu
to the lower level
by pressing the OK or
menu by pressing the
Note :
In the AV/PC mode, the Station menu is not displayed.
b. In the teletext mode, menus are not displayed.
c.
On some models, the LANGUAGE will not display.
a.
1
2
3
4
5
6
7
8
9
MENU/INDEX
STATION
0
CH.
STATION
AUTOOPROGRAMME
{
SYSTEM
{
MANUALOPROGRAMME
{
STORAGEOFROM
{
PROGRAMMEOEDIT
{
START
{
LANGUAGE
{
OBG
OI
ODK
OM
PR
VOL
OK
VOL
()O{OOKOMENU
Station
()O}{OOKOMENU
menu
PR
PICTURE
CH.
STATION
PSM
{
STORAGE
{
O1
DRP
{
SYSTEM
{
OO
USER
{
CHANNEL
{
FINE
{
SEARCH
{
NAME
{
()O{OOKOMENU
M
Picture
()O}{OOKOMENU
menu
STATION
SOUND
CH.
SSM
{
00O-O-O-O-O- O05O SO6O9
BALANCE
{
01O CO 0O3OO 06O SO 1O7
AVL
{
02O CO 1O2OO 07O SO 2O2
03O SO 6O6OO 08O CO 0O9
04O SO 6O7OO 09O CO 1O1
DELETEOOOOCOPY
MOVEOOOOOOSKIP
()O{OOKOMENU
Sound
()O}{OOKOMENU
menu
SPECIAL
CH.
INPUT
{
CHILDOLOCK
{
AUTOOSLEEP
{
()O{OOKOMENU
Special
TV programme
8
menu
Setting up
TV stations
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the Δ / Ε
or NUMBER buttons to scan the stations you have programmed.
Stations can be tuned using automatic or manual modes.
Auto programme
Station
Menu
STATION
CH.
AUTOOPROGRAMME
{
MANUALOPROGRAMME
{
PROGRAMMEOEDIT
{
LANGUAGE
{
tuning
()O{OOKOMENU
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1.
2.
3.
press the MENU button to select the Station menu.
Press the Γ button and then Δ / Ε button to select AUTO PROGRAMME.
Press the Γ button to display the AUTO PROGRAMME menu.
Repeatedly
STATION
SYSTEM
{
STORAGEOFROM
{
START
{
OBG
OI
ODK
OM
1
2
3
4
5
6
7
8
9
TV/AV/PC
MENU/INDEX
()O}{O OKOMENU
0
Press the Γ button. Select a TV system with the Δ / Ε button
on the SYSTEM pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
5.
Press the OK or Φ button.
6.
Press the Δ / Ε button to select STORAGE FROM.
7.
Press the Γ button. Select the beginning programme number
with the Φ / Γ button or NUMBER buttons on the STORAGE
FROM pull-down menu. Any number under 10 is entered with
a numeric '0' in front of it, i.e. '05' for 5.
8.
Press the OK button.
9.
Press the Δ / Ε button to select START.
10. Press the Γ button to begin auto programming.
4.
PR
VOL
OK
VOL
PR
M
STATION
SYSTEM
{
STORAGEOFROM
{
START
{
OOCO01O(BG)
77O7O7O36%
MENU
All receivable stations
are
stored.
In Australia, if no station name can be assigned to a
folstation, the channel number is assigned and stored as
Option:
-----
lowed
assign
number see
the station name.
by
a
'Assigning
a
station name' section to
To stop auto programming, press the MENU button.
When auto programming is completed, the PROGRAMME
EDIT menu appears on the screen. See the 'Programme edit'
section to edit the stored programme.
11. Press the TV/AV/PC button to return to normal TV
viewing.
9
Setting up
Station
Menu
STATION
CH.
AUTOOPROGRAMME
{
MANUALOPROGRAMME
{
PROGRAMMEOEDIT
{
LANGUAGE
{
Manual programme
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
2.
press the MENU button to select the Station menu.
Press the Γ button and then Δ / Ε button to select MANUAL
PROGRAMME.
3.
Press the Γ button to
1.
()O{OOKOMENU
TV stations
Repeatedly
display the MANUAL PROGRAMME
menu.
STATION
1
2
3
4
5
6
7
8
9
TV/AV/PC
MENU/INDEX
VOL
OK
4.
5.
O1
{
OO
CHANNEL
{
FINE
{
SEARCH
{
NAME
{
Press the Δ / Ε button to select STORAGE.
Press the Γ button to select the programme number. Select the
desired programme number (0 to 99) with the Φ / Γ button or
NUMBER buttons on the STORAGE pull-down menu. Any
number under 10 is entered with a numeric '0' in front of it, i.e.
6.
VOL
{
SYSTEM
()O}{OOKOMENU
0
PR
STORAGE
7.
8.
PR
9.
10.
11.
M
12.
13.
14.
15.
'05' for 5.
Press the OK button.
Press the Δ / Ε button to select SYSTEM.
Press the Γ button. Select a TV system with the Δ / Ε button
on the SYSTEM pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or Φ button.
Press the Δ / Ε button to select CHANNEL.
Press the Γ button. Press the Δ / Ε button to select V/UHF
or CABLE on the CHANNEL pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' in
front of it, i.e. '05' for 5.
Press the OK or Φ button.
Press the Δ / Ε button to select SEARCH.
Press the Γ button. Press the Φ / Γ button to commence
searching on the SEARCH pull-down menu. If a station is found
the search will stop.
Press the OK button to store it. The display STORED will appear.
STATION
STORAGE
{
SYSTEM
{
CHANNEL
{
FINE
{
SEARCH
{
NAME
{
{{{{
STORED
16. To store another
station, repeat steps
4 to 15.
17. Press the TV/AV/PC button to return to normal TV
10
viewing.
TV stations
Setting up
Assigning a station name
1.
Repeat the 'Manual programme tuning' steps
2.
3.
4.
Press the Δ / Ε button to select NAME.
Press the Γ button on the NAME pull-down
Press the Δ button. You
and the alphabet A to Z.
can use a
blank,
CH.
menu.
With the Ε button you can select in the opposite direction.
Select the position by pressing the Φ / Γ button and then make
your choice of the second character, and so on.
6.
Press the OK button.
7.
Press the TV/AV/PC button to return to normal TV
1.
2.
3.
fine
is
tuning
only
necessary if
reception
the 'Manual programme tuning'
Press the Δ / Ε button to select FINE.
Press the Γ button.
Repeat
{
MANUALOPROGRAMME
{
PROGRAMMEOEDIT
{
LANGUAGE
{
steps
()O{OOKOMENU
viewing.
tuning
Normally
AUTOOPROGRAMME
+, -, the numeric 0 to 9
5.
Fine
Station
Menu
STATION
1 to 3.
is poor.
1 to 3.
1
2
3
4
5
6
7
8
9
TV/AV/PC
MENU/INDEX
0
STATION
STORAGE
{
SYSTEM
{
CHANNEL
{
FINE
{
SEARCH
{
NAME
{
PR
{{{{
VOL
Press the Φ / Γ
sound
5.
6.
on
button to fine tune for the best
the FINE
pull-down
VOL
PR
}{OOKOMENU
4.
OK
picture
and
menu.
Press the OK button.
Press the TV/AV/PC button to return to normal TV
The
ber
finely tuned programme will be
during programme selection.
indicated
by
a
viewing.
yellow numM
11
Setting up
Station
Menu
STATION
CH.
AUTOOPROGRAMME
{
MANUALOPROGRAMME
{
PROGRAMMEOEDIT
{
LANGUAGE
{
Programme
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
2.
()O{OOKOMENU
TV stations
3.
press the MENU button to select the Station menu.
Press the Γ button and then Δ / Ε button to select PROGRAMME EDIT.
Press the Γ button to display the PROGRAMME EDIT menu.
Repeatedly
00O-O-O-O-O- OO05O SO 6O
9
01O CO 0O
3OO06O SO 1O
7
02O CO 1O
2OO07O SO 2O
2
03O SO 6O
6OO08O CO 0O
9
04O SO 6O
7OO09O CO 1O1
DELETEOOOCOPY
MOVEOOOOOSKIP
1
2
3
4
5
6
7
8
()O}{OOKOMENU
Deleting
1.
2.
9
TV/AV/PC
MENU/INDEX
a programme
Select a programme to be deleted with the Δ / Ε or Φ / Γ button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
0
00O-O-O-O-O- OO05O SO 6O
9
01O CO 0O
3OO06O SO 1O
7
02O CO 1O
2OO07O SO 2O
2
03O SO 6O
6OO08O CO 0O
9
04O SO 6O
7OO09O CO 1O1
PR
VOL
OK
DELETE
VOL
MENU
PR
Copying
1.
2.
a programme
Select a programme to be copied with the Δ / Ε
Press the GREEN button.
All the following programmes are shifted down
Moving
M
1.
2.
3.
or
Φ / Γ button.
one
position.
a
programme
Select a programme to be moved with the Δ / Ε or Φ / Γ button.
Press the YELLOW button.
Move the programme to the desired programme number with
theΔ/ΕorΦ/Γbutton.
4.
Press the YELLOW button
again
to release this function.
00O-O-O-O-O- OO05O SO 6O9
01O CO 0O
3OO06O SO 1O
7
02O CO 1O
2OO07O SO 2O
2
03O SO 6O
6OO08O CO 0O
9
04O SO 6O
7OO09O CO 1O1
MOVEOOFF
()O}{OMENU
a programme number
Select a programme number to be skipped with the Δ / Ε or Φ / Γ
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped programme.
When a programme number is skipped it means that you will be
unable to select it using the Δ / Ε button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Skipping
1.
2.
3.
Press the TV/AV/PC button to return to normal TV
12
viewing.
Setting up
TV stations
the programme table
Calling
You can check the programmes stored in the memory
the programme table.
by displaying
Displaying programme table
Press the LIST button to display
the programme table menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
00O-O-O-O-O- OO05O SO 6O9
01O CO 0O
3OO06O SO 1O
7
02O CO 1O
2OO07O SO 2O
2
03O SO 6O
6OO08O CO 0O
9
04O SO 6O
7OO09O CO 1O1
()O}{OOKOMENU
Note
:
a.
You may find some blue programmes. They have been set up to
be skipped by auto programming or in the programme edit mode.
b.
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
1
2
3
4
5
6
7
8
9
TV/AV/PC
0
PR
programme in the programme table
programme with the Δ / Ε or Φ / Γ button.
Selecting
Select
a
a
Then press the OK button.
The set switches to the chosen programme number.
Paging through
There
are
a
VOL
OK
VOL
LIST/
INPUT
PR
programme table
10 programme table pages in which contain 100 pro-
grammes.
Pressing the Δ / Ε
or
Φ / Γ button
repeatedly
turns the pages.
M
Press the TV/AV/PC button to return to normal TV
viewing.
13
Picture
Picture
Menu
PICTURE
CH.
PSM
{
DRP
{
USER
{
adjustment
PSM (Picture Status Memory)
1.
Repeatedly press the MENU button
2.
3.
to select the Picture menu.
Press the Γ button and then Δ / Ε button to select PSM.
Press the Γ button and then Δ / Ε button to select a picture
setting on the PSM pull-down menu.
PICTURE
()O{OOKOMENU
CH.
PSM
{
DYNAMIC
DRP
{
STANDARD
USER
{
MILD
GAME
USER
()O}OOKOMENU
4.
5.
1
2
3
4
5
6
7
8
9
Press the OK or Φ button.
Press the TV/AV/PC button to return to normal TV
You
viewing.
also recall a desired picture (DYNAMIC, STANDARD,
MILD, GAME or USER) with PSM button on the remote control.
The picture DYNAMIC, STANDARD, MILD and GAME are programmed for optimum picture reproduction at the factory and cannot be changed.
can
TV/AV/PC
MENU/INDEX
DRP
0
(Digital Reality Picture)
DRP
PR
VOL
OK
VOL
1.
2.
3.
4.
5.
PR
improves image
Repeatedly press
Picture
You
outlines in dark
screens.
the MENU button to select the Picture menu.
Press the Γ button and then Δ / Ε button to select DRP.
Press the Γ button and then Δ / Ε button to select DYNAMIC
or MILD on the DRP pull-down menu.
Press the OK or Φ button.
Press the TV/AV/PC button to return to normal TV viewing.
adjustment
adjust picture contrast, brightness, colour intensity, sharpness and tint (NTSC input only) to the levels you prefer.
1.
Repeatedly press the MENU button to select the Picture menu.
M
2.
3.
PSM
can
Press the Γ button and then Δ / Ε button to select USER.
Press the Γ button and then Δ / Ε button to select the desired
picture item on the USER pull-down menu.
PICTURE
CH.
PSM
{
DRP
{
USER
{
CONTRAST
{
BRIGHTNESS
{
COLOUR
{
SHARPNESS
{
TINT
{
()O}{O OKOMENU
4.
5.
Press the Γ button.
Press the Φ / Γ button to make
each sub menu.
CONTRAST
appropriate adjustments
on
the
80
()O}{O OKOMENU
6.
7.
14
You can also select other USER items directly with Δ / Ε button
and adjust them with Φ / Γ button.
Press the OK button to store it for the picture USER.
Press the TV/AV/PC button to return to normal TV viewing.
Sound
SSM
You
(Sound Status Memory)
Sound
Menu
SOUND
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of the equalizer.
can
Speech
1.
2.
3.
adjustment
press the MENU button to select the Sound menu.
Press the Γ button and then Δ / Ε button to select SSM.
Press the Γ button and then Δ / Ε button to select a sound setting on the SSM pull-down menu.
CH.
SSM
{
BALANCE
{
AVL
{
Repeatedly
()O{OOKOMENU
SOUND
CH.
SSM
{
BALANCE
{
AVL
{
FLAT
MUSIC
MOVIE
SPEECH
USER
{
()O}OOKOMENU
Sound Frequency Adjustment
a. Press the Γ button in USER to
display
the USER sub
menu.
0.1O0.5O1.5O5.0O10OkHz
1
2
3
4
5
6
7
8
9
TV/AV/PC
MENU/INDEX
()O}{O OKOMENU
0
b. Select a sound band by pressing the Φ / Γ button.
c. Make appropriate sound level with the Δ / Ε button.
d. Press the OK button to store it for the sound USER.
The display STORED appears.
Press the TV/AV/PC button to return to normal TV
viewing.
You can also recall a desired sound setting (FLAT, MUSIC, MOVIE,
SPEECH or USER) with SSM button on the remote control. The sound
settings FLAT, MUSIC, MOVIE and SPEECH are programmed for
optimum sound reproduction at the factory and cannot be changed.
PR
VOL
VOL
OK
PR
If you press the SSM button after making appropriate adjustthe USER sub menu, the display USER automatically
appears even though you have already set a factory preset setting;
FLAT, MUSIC, MOVIE or SPEECH.
Note
ment
:
on
M
Sound
adjustment
You
can adjust balance, AVL (Auto
ically keeps on an equal volume
SSM
Volume Leveler). AVL automatlevel even if you change pro-
grammes.
1.
2.
3.
press the MENU button to select the Sound menu.
Press the Γ button and then Δ / Ε button to select the desired
sound item; BALANCE or AVL.
Make desired adjustment with the Φ / Γ, Δ / Ε or OK button
on each pull-down menu.
Repeatedly
SOUND
CH.
SSM
{
BALANCE
{
AVL
{
ON
OFF
()O}OOKOMENU
4.
Press the TV/AV/PC button to return to normal TV
viewing.
15
Sound
adjustment
Stereo/Dual
reception
When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button twice again.
for dual language broadcast
programme is received in two languages (dual language), you
can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II
button repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
Language selection
If
a
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
If your set is
equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
I/II
2.
3.
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
Sound output selection
In AV
mode, you
can
select
output sound for the left and right loud-
speakers.
press the I/II button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
Repeatedly
L+R
:
L+L
:
R+R
16
:
speaker.
Audio signal
speakers.
Audio signal
speakers.
from audio L
input
is sent to left and
right
loud-
from audio R
input
is sent to left and
right
loud-
Other functions
TV, AV and PC modes
be set for TV, AV or PC mode. AV mode is used when a
Inputs
video cassette recorder (VCR), or other equipment is connected to
the set.
can
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
2.
3.
Special
SPECIAL
CH.
INPUT
{
CHILDOLOCK
{
AUTOOSLEEP
{
Menu
()O{OOKOMENU
press the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select INPUT.
Press the Γ button and then Δ / Ε button to select TV, AV, SVIDEO, COMPONENT or PC.
Repeatedly
SPECIAL
CH.
TV
INPUT
{
CHILDOLOCK
{
AV
AUTOOSLEEP
{
S_VIDEO
1
2
3
4
5
6
7
8
COMPONENT
PC
()O}OOKOMENU
4.
The AV, S-VIDEO, COMPONENT and PC modes are :
AV
: VCR connected to the AV of the set
S-Video : S-VIDEO VCR connected to the S-VIDEO socket of
the set
COMPONENT : COMPONENT connected to the DVD DTV IN
socket of the set
PC
: PERSONAL COMPUTER connected to the PC socket
of the set
Press the TV/AV/PC button to return to normal TV viewing.
Alternatively you can select the TV
TV/AV/PC button.
In AV
mode,
to return to TV
or
AV mode
mode, press the
Δ / Ε
by pressing
or
9
TV/AV/PC
MENU/INDEX
0
PR
VOL
OK
VOL
PR
the
NUMBER but-
tons.
M
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
2.
3.
4.
press the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select CHILD
LOCK.
Press the Γ button and then Δ / Ε button to select ON or OFF
on the CHILD LOCK pull-down menu.
Press the TV/AV/PC button to return to normal TV viewing.
Repeatedly
With the lock on, the display CHILD LOCK ON appears on the
screen if any button on the front panel is pressed while viewing the
TV.
Note : The display CHILD LOCK ON will not appear on the screen
if any button on the front panel is pressed while displaying the menus.
17
Other functions
Special
Auto
SPECIAL
Menu
CH.
INPUT
{
CHILDOLOCK
{
AUTOOSLEEP
{
sleep
If you select ON on the AUTO SLEEP pull-down menu, the set will
switch itself to standby mode approximately ten min-
automatically
utes after
()O{OOKOMENU
1.
2.
3.
4.
a
TV station
stops broadcasting.
press the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select AUTO
Repeatedly
SLEEP.
Press the Γ button and then Δ / Ε button to select ON or OFF
on the AUTO SLEEP pull-down menu.
Press the TV/AV/PC button to return to normal TV viewing.
1
2
3
Sleep
4
5
6
7
8
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time elapses.
9
TV/AV/PC
MENU/INDEX
0
timer
Press the SLEEP button to select the number of minutes. The diswill appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180 and 240. The timer begins to count down from the number
---
of minutes selected.
PR
VOL
OK
VOL
PR
---
SLEEP
18
Note :
To view the remaining sleep time, press the SLEEP button once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
until the display
appears.
c.
When you switch the set off, the set releases the preset sleep time.
a.
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
Teletext is
a
set
free service broadcast by most TV stations which gives
information on news, weather, television programmes, share prices and many other topics.
a
up-to-the-minute
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
Switch on/off
Press the TEXT button to switch to teletext. The initial page or last
page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TV/AV/PC button to switch off teletext. The previous
mode reappears.
1
2
3
4
5
6
7
8
0
SIMPLE text
PR
Page selection
1.
2.
OK
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The Δ / Ε button can be used to select the preceding or fol-
lowing
9
TV/AV/PC
PR
TEXT
page.
a colour button in LIST mode
If the TV is in SIMPLE text, TOP text or FASTEXT
M
button to switch to LIST mode.
Programming
mode, press theM
Four teletext page numbers of your choice can be colour coded and
easily selected by pressing the corresponding coloured button on
the remote control handset.
1.
Press
a
2.
Using
the NUMBER
3.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number by blinking once. From now on, you can
4.
coloured button.
buttons, select the page you wish
to pro-
select this page with the same coloured button.
The three other coloured buttons are programmed in this way.
Note
:
In PIP of the PC
mode, select the sub picture size is PIP (S),
PIP
(M) or PIP (L).
In PIP (S) of the PC mode,
the text
on
the
screen
may be unstable.
19
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the Δ button can be used.
4. The red button permits to return to previous selection.
Alternatively the Ε button can be used.
1
2
3
4
5
6
7
8
9
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
MENU/INDEX
i
0
FASTEXT
PR
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
Page selection
PR
1.
2.
3.
4.
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The Δ / Ε button can be used to select the preceding or fol-
lowing
20
page.
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
page.
Press this button
again
half of the page.
the bottom half of the
to return to the normal
display.
UPDATE
Displays
teletext
the TV
picture on
page. The display
of the
corner
screen.
the
screen
while
waiting
for the
1
2
3
4
5
6
7
8
9
new
will appear at the top left hand
is available then
When the
0
updated page
will change to the page number.
Press this button to view the updated teletext page.
display
PR
HOLD
Stops
the automatic page
text page consists of 2
change
which will
occur
if
a
tele-
sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
PR
or more
stop symbol is displayed
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
screen
MIX
SIZE
HOLD
TIME
REVEAL
MIX
Displays
the teletext pages superimposed on the TV
picture off press this button again.
picture.
To switch the TV
TIME
When
viewing
the time at the
button
again
a
TV programme, press this button to display
corner of the screen. Press this
top right hand
to
remove
the
display.
In the teletext
mode,
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the
NUMBER buttons.
change
Press
again
RED/GREEN,
Δ
/ Ε
or
to exit this function.
21
Connection of external
You
can
connect additional
etc. to your set.
Examples
equipment
equipment,
are
such
as
VCRs, camcorders
shown below.
Aerial socket
1.
Connect the RF out socket of the VCR to the aerial socket
2.
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
3.
VCR
4.
5.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button
Component
1.
on
on
the VCR.
in sockets
Connect the COMPONENT video
Pr
or
Y B-Y
R-Y)
output sockets (Y Cb Cr, Y Pb
of the COMPONENT
to the COMPONENT INPUT sockets
(Y
(480i/480p/720p/1080i)
PB PR) of the set.
2.
Connect the audio cable from the COMPONENT to the AUDIO
3.
sockets of the set.
Press the TV/AV/PC button to select COMPONENT.
Press the PLAY button on the COMPONENT.
4.
The COMPONENT
COMPONENT
playback picture
appears
on
the
screen.
(DVD)
Audio/Video in sockets
1.
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set.
2.
3.
Press the TV/AV/PC button to select AV.
Press the PLAY button
The VCR
on
playback picture
the VCR.
appears
on
the
screen.
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L (MONO) socket of the set.
VCR
22
Connection of external
S-Video/Audio in
sockets(S-Video)
When
S-VIDEO VCR to the S-VIDEO
connecting
picture quality will
1.
an
be further
equipment
socket, the
improved.
Connect the S-Video socket of the VCR to the S-VIDEO socket of the set.
2.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
S-VIDEO VCR
sockets of the set.
3.
4.
Select S-VIDEO by pressing the TV/AV/PC button
Press the PLAY button on the VCR.
The VCR
playback picture
Headphone
appears
on
the
repeatedly.
screen.
socket
Insert the
headphone plug to the headphone socket of the set. You
through the headphone and TV's speaker.
To adjust the headphone volume, press the Φ / Γ button. If you
press the MUTE button, the sound from the headphone and TV's
speaker are switched off.
can
listen to the sound
23
Connection of PC
PC in socket
1.
2.
3.
4.
PERSONAL COMPUTER
(D-Sub jack)
Connect the signal cable from the monitor output socket of the
PERSONAL COMPUTER to the PC input socket of the set.
Connect the audio cable from the PC to the PC SOUND sockets of the set.
Press the TV/AV/PC button to select PC.
Switch on the PC, and the PC screen appears on the set.
The set can be operated as the PC monitor.
Note
block
:
If you have
Apple macintosh, connect the VGA desktop
from the 3 row 15 pin to 2 row 15 pin with the
cable and connect the VGA desktop block to the Macintosh.
an
(not supplied)
signal
Displayable
MODE
Monitor
Specification
Resolution
Horizontal
Frequency(KHz)
VGA
SVGA
(MAC)
XGA
Vertical
Frequency(Hz)
640x350
31.4KHz
70Hz
640x350
37.8KHz
85Hz
640x400
31.4KHz
70Hz
640x400
37.8KHz
85Hz
640x480
31.5KHz
60Hz
640x480
35KHz
66Hz
640x480
37.9KHz
72Hz
640x480
37.5KHz
75Hz
640x480
43.3KHz
85Hz
800x600
35.2KHz
56Hz
800x600
37.9KHz
60Hz
800x600
48.1KHz
72Hz
800x600
46.9KHz
75Hz
800x600
53.7KHz
85Hz
832x624
49.7KHz
75Hz
1024x768
48.4KHz
60Hz
1024x768
56.5KHz
70Hz
1024x768
60.2KHz
75Hz
1024x768
68.7KHz
85Hz
(Synchronization input
form
:
separate)
Note :
If the set is cold, there may be a small "flicker" when the set is
switched on. This is normal, there is nothing wrong with the set.
b. If possible, use the VESA 1,024x768@60Hz video mode to
obtain the best image quality for your LCD monitor. If used under
the other resolutions, some scaled or processed pictures may
appear on the screen. If used to PC vertical frequency 85Hz,
some noise can be seen when PIP is on. In this case, set the PC
vertical frequency to 60Hz. The set has been pre-adjusted to the
mode VESA 1,024x768@60Hz.
c.
Some dot defects may appear on the screen, like Red, Green or
Blue spots. However, this will have no impact or effect on the
monitor performance.
d. Do not press the LCD screen with your finger for a long time as
this may produce some temporary distortion effects on the
a.
screen.
e.
When the PC screen appears on the set, a message may appear
the screen, and the message will differ according to the
Window system version (Win98, 2000). If a message appears
click "Next" until the message finishes.
If the message "OUT OF RANGE" appears on the screen,
adjust the PC as in the 'Displayable Monitor Specification' section.
on
f.
DPM (Display Power Management) mode
When the PC is in the power saving mode, automatically the
itor goes into DPM mode to save the energy.
24
mon-
Connection of PC
Menu selection
1.
2.
3.
press the MENU button to display each menu.
Press the Γ button and then Δ / Ε button to select a menu
item.
Press the Γ button to display the sub menu or the pull-down
Repeatedly
menu.
4.
Change
the
setting
of
an
item in the sub
or
Φ/ΓorΔ/Ε.
pull-down
menu
with
You can move to the higher level menu by pressing the OK or
Φ button and to move to the lower level menu by pressing the
Γ button.
Note :
a.
See 'Picture adjustment' section to adjust the picture.
b. See 'Sound adjustment' section to adjust the sound.
c.
See 'TV, AV and PC modes' section to select TV, AV, S-VIDEO, COMPONENT or PC.
PICTURE
CH.
PSM
{
DRP
{
USER
{
1
2
3
4
5
6
7
8
9
MENU/INDEX
0
PR
()O{OOKOMENU
Picture
VOL
menu
OK
VOL
PR
PCOSETUP
SOUND
CH.
SSM
{
O
BALANCE
{
O
AVL
{
+39
{
{
OAUTO_CONFIGURE
{
ORESET
{
{
M
menu
SPECIAL
CH.
{
()O}{OOKOMENU
()O{OOKOMENU
Sound
(H_POSITION)
(V_POSITION)
OCLOCK
OCLOCKKPHASE
PIPOMENU
PIP
INPUT
{
SETUP
{
INPUT
{
PIP
{
PR
{
POSITION
{
SOUNDOSELECT
{
OPIP(S)
OPIP(M)
OPIP(L)
}{O OKOMENU
()O{OOKOMENU
Special
OOFF
menu
PC programme
25
Connection of PC
Special
PC
SPECIAL
Menu
CH.
INPUT
{
SETUP
{
PIP
{
You
can adjust horizontal/vertical position, clock,
configure and reset as you prefer.
1.
()O{OOKOMENU
Setup
2.
3.
clock
auto-
phase,
press the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select SETUP.
Press the Γ button and then Δ / Ε button to select the desired
picture item.
Repeatedly
PCOSETUP
O
O
1
2
3
{
(H_POSITION)
(V_POSITION)
+39
{
OCLOCK
OCLOCKKPHASE
{
OAUTO_CONFIGURE
{
ORESET
{
{
()O}{OOKOMENU
4
5
6
7
8
9
4.
Press the Φ / Γ button to make
TV/AV/PC
MENU/INDEX
(H-POSITION)
0
This function is to
appropriate adjustments.
/
(V-POSITION)
adjust picture to left/right
and
up/down
as
you
prefer.
PR
VOL
OK
CLOCK
This function is to minimize any vertical bars or stripes visible on
screen background. And the horizontal screen size will also
VOL
the
change.
PR
CLOCK PHASE
This function allows you to remove any horizontal noise and
clear or sharpen the image of characters.
AUTO-CONFIGURE
This function is for the automatic
adjustment
of the
posi-
screen
tion, clock and clock phase. The displayed image will disappear
M
for
a
few seconds while the
Auto-configuration
is in process.
Note : Some signal from some graphics boards may not function properly. If the results are unsatisfactory, adjust your monitor's position, clock and clock phase manually.
RESET
This function allows you to return to the good picture reproduction programmed at the factory and cannot be changed.
5.
Press the OK button to store it for the PC monitor
6.
Repeatedly
viewing.
Note : If you turn on the
need to adjust PC Setup,
26
picture.
press the TV/AV/PC button to return to normal TV
PIP, you
please
can
not
get
in PC
turn off the PIP first.
Setup.
If you
PIP
PIP
PIP
1.
2.
operation
operation
Special
SPECIAL
(Picture in Picture) displays a picture within a picture in the PC mode.
Repeatedly press the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select PIP.
CH.
INPUT
{
SETUP
{
PIP
{
Menu
PIPOMENU
PIP
{
OOFF
INPUT
{
PR
{
POSITION
{
OPIP(S)
OPIP(M)
OPIP(L)
SOUNDOSELECT
{
()O{OOKOMENU
}{O OKOMENU
3.
4.
5.
Press the Γ button to display the PIP menu.
Press the Δ / Ε button to select PIP.
Press the Γ button to select the desired sub
You
can
(M),
or
picture
size.
also recall a desired sub picture size (Off, PIP
PIP (L)) with PIP button on the remote control.
(S),
PIP
Press the OK or Φ button.
Press the Δ / Ε button to select INPUT.
Press the Γ button and then Δ / Ε button to select TV, AV or
S-VIDEO.
9.
Press the OK or Φ button.
10. Press the Δ / Ε button to select PR.
11. Press the Γ button to select the programme number. Select the
desired programme number (0 to 99) with the Φ / Γ button or
NUMBER buttons on the PR pull-down menu. Any number under
10 is entered with a numeric '0' in front of it, i.e. '05' for 5.
12. Press the OK button.
13. Press the Δ / Ε button to select SOUND SELECT.
14. Press the Γ button and then Δ / Ε button to select PC or PIP
on the SOUND SELECT pull-down menu.
15. Press the OK or Φ button.
16. Press the Δ / Ε button to select POSITION.
17. Press the Γ button.
18. Press the Δ / Ε or Φ / Γ button until desired position is
achieved. The sub picture moves up/down or left/right.
19. Press the TV/AV/PC button to return to normal TV viewing.
Alternatively you can select or operate the PIP function by using the
PIP, POSITION, INPUT or PR +/- buttons.
6.
7.
8.
1
2
3
4
5
6
7
8
9
TV/AV/PC
MENU/INDEX
0
PR-
VOL
PR+
PR
OK
VOL
PR
INPUT
On and off
Select the PC mode.
Press the PIP button to switch on the sub
Press this button again to switch it off.
Input
mode selection for sub
Press the INPUT button to select the
POSITION
picture.
M
picture
mode for the sub
input
input
Each time this button is pressed, each
displayed as shown below.
ture is
Programme
Programme
PIP
number
AV
selection for sub
picture.
pic-
mode for the sub
S-VIDEO
picture
Press the PR +/- button. The selected programme number is displayed just below the programme number of main picture.
Sub
picture
Repeatedly
size
press the PIP button to select the desired sub
size. The sub
picture
Off
Sub
appears
PIP (S)
as
below.
PIP
(M)
PIP
picture
(L)
picture position change
Press the POSITION button. Repeatedly press the Δ / Ε or Φ / Γ
button until desired position is achieved. The sub picture moves
up/down
or
left/right.
Note :
If you turn on the TXT in PIP, some PIP keys, such as POSITION, INPUT or PR +/- etc. will work as TXT keys.
b.
In PIP picture resolution will be decreased by the PIP size.
a.
27
Troubleshooting
check list
Symptoms
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Incorrect
position
Vertical bars
or
stripes
on
background
Horizontal noise
Signal
Cable message appears
Check these items and try to
these
adjust
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
Check aerial
(broken lead?)
into
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
Auto-configure
or
adjust
(VCR only)
the H/V
position
Auto-configure
or
adjust
Clock
Auto-configure
or
adjust
Clock Phase
Is the
Signal
Cable connected
or
loose
Download PDF

advertising