LG | RT-17LZ40 | LG RT-17LZ40 Owner’s Manual

LCD
Colour Television
ΟΩΝΕΡ∏Σ ΜΑΝΥΑΛ
Please read this manual
carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
mation to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828TUL229G
(1EA)
d
cover
require
and
quote this infor-
service.
Χοντεντσ
Ινσταλλατιον
3
Λοχατιον ανδ φυνχτιον οφ χοντρολσ
Remote control handset
Battery installation
Side panel / Top panel
4
Βασιχ οπερατιον
On and off / Programme selection
Volume adjustment / Quick view
Mute function / Auto Demonstration
On screen language selection (option)
7
Ον
8
σχρεεν μενυσ
Menu selection
υπ Τ? στατιονσ
Auto programme tuning
Manual programme tuning
Fine Tuning
Programme edit
Favourite programme
Calling the programme table
9
Σεττινγ
Πιχτυρε αδφυστμεντ
Picture adjustment
Picture format (option)
14
Σουνδ αδφυστμεντ
Sound adjustment
Stereo/Dual reception / NICAM
Sound output selection
15
Τιμε σεττινγ
Clock
Off time / On time
17
Οτηερ φυνχτιονσ
TV, AV, DVD and PC monitor modes
Child lock / Blue back (option)
Auto sleep / Sleep timers
18
Τελετεξτ (οπτιον)
Switch on/off
SIMPLE text
TOP text (option)
FASTEXT mode
Special teletext functions
20
Χοννεχτιον οφ εξτερναλ εθυιπμεντ
Aerial socket
DVD in sockets / DTV in sockets
Audio/Video in sockets
S-Video/Audio in sockets (S-AV) (option)
Headphone socket
23
Χοννεχτιον οφ ΠΧ
Picture adjustment
PC in socket (D-Sub
25
Τρουβλεσηοοτινγ
2
reception (option)
jack)
χηεχκ λιστ
27
Ινσταλλατιον
Ποωερ
This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs.
a. Open the back panel cover.
b. After connecting the power cord and the aerial to the set.
c. Close the back panel cover.
a
c
Ωαρνινγ
b
To prevent fire or shock hazard, do not expose the set to rain or
moisture. Do not rub or strike the Active Matrix LCD with anything
hard as this may scratch, mar, or damage the Active Matrix LCD
permanently.
a
Σερπιχε
c
Never
the back cover of the set as this can expose you to
high voltage and other hazards. If the set does not operate properly, unplug it and call your dealer.
remove
Αεριαλ
Connect the aerial cable to the socket marked +75 Ω on the back.
For the best reception an outdoor aerial should be used.
b
Λοχατιον
12
3
Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
set is placed in a position to allow a free flow of air. Do not cover
the ventilation openings on the back cover.
The standing angle can be adjusted as shown in pictures.
When you install the set to use the wall mounting bracket (optional
parts), fix it carefully so as not to drop. The set has Kensington
Security System Connector on the back panel. Connect the
Kensington Security system cable (not supplied, optional parts).
12
3
Χλεανινγ
Unplug the set before cleaning the face of the LCD Screen. Dust
the set by wiping the screen and the cabinet with a soft, clean cloth.
If the screen requires additional cleaning, use a clean, damp cloth.
Do not use liquid cleaners or aerosol cleaners.
3
Λοχατιον ανδ φυνχτιον οφ χοντρολσ
All the functions
can
be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the side
panel of the set.
Only the remote control handset supplied will operate this set.
Ρεμοτε χοντρολ ηανδσετ
MUTE
POWER
1
10
11
TV/AV MULTIMEDIA I/II
Before you use the remote control handset,
teries. See the next page.
1.
LIST
Q.VIEW MENU
2.
13
34
install the bat-
ΜΥΤΕ
switches the sound
12
2
please
on or
off.
Τ?/Α?
selects the remote
clears the
menu
switches the set
operating
from the
from
on
mode.
screen.
standby.
PR
5
3.
OK
VOL
VOL
ΛΙΣΤ
displays
the programme table.
PR
4.
Θ.?ΙΕΩ
returns to the
selects
123
6
5.
456
/
Ε
SSM
SLEEP
viewed programme.
(Προγραμμε Υπ/Δοων)
a programme or a menu item.
switches the set on from standby.
0
ARC
Φ
PSM
/
Γ
(?ολυμε Υπ/Δοων)
adjusts the volume.
adjusts menu settings.
14
ΟΚ
TEXT
accepts your selection
8
UPDATE
TIME
SIZE
MIX
HOLD
REVEAL
9
6.
15
7.
INDEX
i
MODE
or
the current mode.
displays
ΝΥΜΒΕΡ ΒΥΤΤΟΝΣ
switches the set
?
from
on
standby
or
ΣΣΜ (Σουνδ Στατυσ Μεμορψ)
recalls your preferred sound setting.
M
8.
ΣΛΕΕΠ
sets the
9.
(With TELETEXT)
4
previously
favourite programme.
selects
789
7
Δ
a
sleep
timer.
ΑΡΧ (οπτιον)
select your desired
picture
format.
directly
select
a
number.
Λοχατιον ανδ φυνχτιον οφ χοντρολσ
10. ΜΥΛΤΙΜΕΔΙΑ
selects TV, DVD or PC mode.
clears the menu from the screen.
switches the set
on
from
standby.
on
from
standby
11. ΠΟΩΕΡ
switches the set
or
off to
standby.
10
MUTE
12. Ι/ΙΙ
POWER
1
selects the
selects the
language during dual language
sound output (option).
broadcast.
11
TV/AV MULTIMEDIA I/II
12
2
LIST
Q.VIEW MENU
13. ΜΕΝΥ
selects
14. ΠΣΜ
13
34
a menu.
(Πιχτυρε Στατυσ Μεμορψ)
preferred picture setting.
PR
recalls your
5
15. ΤΕΛΕΤΕΞΤ ΒΥΤΤΟΝΣ
These buttons
are
For further details,
?
:
(οπτιον)
used for teletext.
see
the 'Teletext' section.
123
ΧΟΛΟΥΡΕΔ ΒΥΤΤΟΝΣ
Βαττερψ
models)
VOL
PR
Νο φυνχτιον
TELETEXT
OK
VOL
or
:
These buttons
are
used for teletext
(only
6
programme edit.
456
789
7
ινσταλλατιον
SSM
0
PSM
14
SLEEP
8
The remote control handset is powered by two AAA/Alkaline type batteries. To load the batteries, turn
the remote control handset over
and open the battery compartment.
Install two batteries as indicated by
the polarity symbols ( + and
)
marked inside the compartment.
-
Νοτε
:
Το αποιδ
δαμαγε
φρομ
βαττεριεσ ιφ ψου δο νοτ πλαν το
εξτενδεδ περιοδ οφ τιμε.
ποσσιβλε βαττερψ λεακαγε,
υσε
τηε
ρεμοπε
τηε ρεμοτε χοντρολ ηανδσετ φορ
αν
(Without TELETEXT)
5
Λοχατιον ανδ φυνχτιον οφ χοντρολσ
∞
ΡΤ-17ΛΖ40 σεριεσ
Τοπ πανελ
ON/OFF
TV/AV/PC
MENU
OK
1
2
3
4
5
PR
6
7
Ρ
9
8
∞
VOL
Σιδε
ΡΤ-15ΛΑ70 σεριεσ
πανελ
PR
6
VOL
5
OK
4
S-VIDEO
TV/A PC
∞
8
/ION/F
VIDEO
(MONO)
L
AUDIO
R
AV
MENU
7
R
10
Βαχκ
321
πανελ
ΡΤ-15ΛΑ66 σεριεσ
PR
VOL
6
5
OK
MENU
R
TV
AV/PC
/I
ON/OFF
432
1
78
1.
ΟΝ/ΟΦΦ
switches the set
7.
on
from
standby
or
off to
standby.
Νοτε
ισ οφφ.
2.
3.
4.
Ποωερ λινε λιπεσ
:
επεν
ωηεν τηε ποωερ
Τ?/Α?/ΠΧ/Δ?Δ
selects the remote operating mode.
clears the menu from the screen.
switches the set on from standby.
ΜΕΝΥ
selects
8.
ΡΕΜΟΤΕ ΧΟΝΤΡΟΛ ΣΕΝΣΟΡ
9.
ΗΕΑΔΠΗΟΝΕ ΣΟΧΚΕΤ
Connect the headphone
plug
on.
to this socket.
10. ΑΥΔΙΟ/?ΙΔΕΟ ΙΝ ΣΟΧΚΕΤΣ (Α?)
Connect the audio/video out sockets of external equipment to these sockets.
a menu.
ΟΚ
accepts your selection
or
displays
the current
mode.
5.
Φ
/
Γ
(?ολυμε Υπ/Δοων)
adjusts the volume.
adjusts menu settings.
6.
Δ
/
Ε
(Προγραμμε Υπ/Δοων)
selects a programme or a menu item.
switches the set on from standby.
6
ΠΟΩΕΡ/ΣΤΑΝΔΒΨ ΙΝΔΙΧΑΤΟΡ ( )
illuminates red in standby mode.
illuminates green when the set is switched
Σ-?ΙΔΕΟ/ΑΥΔΙΟ ΙΝ ΣΟΧΚΕΤΣ (ΣΑ?)
Connect the video out socket of an S-VIDEO
VCR to the Σ-?ΙΔΕΟ socket.
Connects the audio out sockets of the SVIDEO VCR to the audio sockets as in Α?.
Βασιχ
οπερατιον
Ον ανδ οφφ
1.
2.
3.
Press the ΠΟΩΕΡ, Δ / Ε, Τ?/Α?, ΜΥΛΤΙΜΕΔΙΑ or NUMBER
buttons to switch it on fully.
Press the ΠΟΩΕΡ button. The set reverts to standby mode.
Pull out mains plugs to switch the set off.
Νοτε : Ιφ, ωηιλε τηε σετ ισ σωιτχηεδ ον, τηε μαινσ πλυγ ισ δισχοννεχτεδ τηε σετ ωιλλ σωιτχη το στανδβψ ορ ποωερ ον ωηεν τηε μαινσ
πλυγ ισ ρεπλαχεδ ιν τηε μαινσ ποωερ σοχκετ.
Προγραμμε
σελεχτιον
You can select
buttons.
a
αδφυστμεντ
Press the
Φ
/
Γ
button to
POWER
TV/AV MULTIMEDIA I/II
programme number with the
?ολυμε
MUTE
adjust
Δ
/
Ε
or
NUMBER
Q.VIEW MENU
the volume.
PR
OK
VOL
Θυιχκ πιεω
VOL
PR
Press the Θ.?ΙΕΩ button to view the last programme you
were
watching.
Νοτε
Τηισ φυνχτιον ωορκσ ονλψ ωηεν Favourite programme ισ
σετ το Off. Οτηερωισε εαχη πρεσσ οφ τηισ βυττον ωιλλ σελεχτ α στορεδ
φαπουριτε προγραμμε.
:
Press the ΜΥΤΕ button. The sound is switched off and the
W appears.
can
cancel it
456
789
Μυτε φυνχτιον
You
123
by pressing
the ΜΥΤΕ,
Φ
display
SSM
0
/ Γ, ΣΣΜ, Ι/ΙΙ button.
Αυτο Δεμονστρατιον
To review all the menus programmed in the set, press the ΟΚ button of the top panel controls for about 10 seconds. To stop auto
demonstration, press any button of the panel controls or the
ΠΟΩΕΡ button of the remote control.
?
i
Ον
σχρεεν
The
λανγυαγε
σελεχτιον
menu can be displayed on the
guage. First select your language.
1.
2.
3.
4.
5.
6.
Press the
Press the
Press the
Press the
Press the
All the on
Press the
M
(οπτιον)
screen
in your desired lan-
ΜΕΝΥ button to select the Special menu.
Δ / Ε button to select Language.
ΟΚ button.
Δ / Ε button to select your desired language.
ΟΚ button.
screen displays will appear in the selected language.
Τ?/Α? or ΜΥΛΤΙΜΕΔΙΑ button to return to normal TV
viewing.
7
Ον
σχρεεν μενυσ
The
an
dialogue
operator
also
between you and your set takes place on screen with
The buttons required for the operating steps are
menu.
displayed.
Μενυ σελεχτιον
1.
2.
MENU
the ΜΕΝΥ button to display each menu.
Press the Δ / Ε button to select a menu item.
The selected menu item changes from white to red.
3. Press the Φ / Γ button to change the setting of a menu item or
ΟΚ button to display the sub menu.
Νοτε :
Ιν τηε τελετεξτ μοδε, μενυσ αρε νοτ δισπλαψεδ.
α.
β. Ον σομε μοδελσ, τηε Language ορ Blue back ωιλλ νοτ βε
Repeatedly press
δισπλαψ.
PR
OK
VOL
VOL
AutoOprogramme
ManualOprogramme
ProgrammeOedit
FavouriteOprogramme
System
StorageOfrom
()OOKOMENU
()O}{O MENU
BG
1
Start
PR
Στατιον
Contrast
μενυ
100
95
85
80
Brightness
Colour
Sharpness
Storage
System
Channel
V
{{{
Search
Name
()O}{O OKOMENU
1
BG
1
UHF
Fine
CO01
()O}{O 0- 9 OOKOMENU
Πιχτυρε
μενυ
00O CO 1DOO 05O SO 69
Equalizer
Balance
AVL
0
Off
01O CO 03
O06O SO 17
02O CO 12OO 07O SO 22
03O SO 66OO 08O CO 09
04O SO 67OO 09O CO 11
Delete
Move
()OOKOMENU
Skip
()O}{O OKOMENU
Σουνδ
?
Copy
μενυ
Off
i
M
Clock
-ι-ι:ι-ι-ι-ι:ι-ι-
OffOtime
Off
OnOtime
-ι-ι:ι-ι-
Pr.
1
VOL. 30
Off
()O}{O OKOMENU
Input
AutoOsleep
Language
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
()O}{O OKOMENU
Τιμε
ChildOlock
-
μενυ
TV
Off
Off
Flat
Music
Movie
Speech
User
0.1O0.5O1.5O5.0O10OKHz
()O}{O MENU
Σπεχιαλ
Τ? προγραμμε
8
}{OMENU
μενυ
Σεττινγ
υπ Τ? στατιονσ
to 100 TV stations can be stored in this set by programme num(0 to 99). Once you have preset the stations, you will be able
to use the Δ / Ε or NUMBER buttons to scan the stations you have
Up
bers
programmed.
Stations
can
be tuned
using
automatic
Στατιον
Μενυ
AutoOprogramme
ManualOprogramme
ProgrammeOedit
FavouriteOprogramme
manual
or
modes.
()OOKOMENU
Αυτο προγραμμε
τυνινγ
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this
set.
1.
2.
3.
the ΜΕΝΥ button to select the Station
Press the Δ / Ε button to select Auto programme.
Press the ΟΚ button to display the Auto programme
Repeatedly press
menu.
TV/AV MULTIMEDIA
menu.
MENU
BG
1
System
StorageOfrom
Start
()O}{OMENU
PR
4.
5.
6.
7.
8.
Press the Δ / Ε button to select System. Select a TV system
with the Φ / Γ button;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the Δ / Ε button to select Storage from.
Select the beginning programme number with the Φ / Γ button
or NUMBER buttons. Any number under 10 is entered with a
numeric TM0∏ in front of it, i.e. TM05∏ for 5.
Press the Δ / Ε button to select Start.
Press the ΟΚ button to begin auto programming.
System
StorageOfrom
Start
OK
VOL
VOL
PR
123
456
789
BG
1
CO15
0
2%
1
MENU
All receivable stations
are
stored.
Οπτιον: In Australia, if no station name can be assigned to a
folstation, the channel number is assigned and stored as
?
-----
lowed
assign
a number see
the station name.
by
'Assigning
a
station name' section to
i
M
To stop auto programming, press the ΜΕΝΥ button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
9.
Press the Τ?/Α? button to return to normal TV
viewing.
9
Σεττινγ
Στατιον
Μενυ
AutoOprogramme
ManualOprogramme
ProgrammeOedit
FavouriteOprogramme
Μανυαλ προγραμμε
τυνινγ
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name
()OOKOMENU
υπ Τ? στατιονσ
with five characters to each programme number.
the ΜΕΝΥ button to select the Station menu.
button to select Manual programme.
Press the ΟΚ button to display the Manual programme
1.
Repeatedly press
2.
Press the
3.
/
Δ
Ε
menu.
Storage
System
TV/AV MULTIMEDIA
Channel
V
1
BG
1
UHF
Fine
{{{
Search
Name
MENU
CO01
()O}{O0- 9 OOKOMENU
4.
5.
PR
OK
VOL
with
VOL
PR
a
numeric TM0∏ in front of it, i.e. TM05∏ for 5.
6.
Press the ΟΚ button.
7.
Press the Δ / Ε button to select System.
Select a TV system with the Φ / Γ button;
BG : (Asia/New Zealand/M.East/Africa/Australia)
8.
123
456
9.
789
Press the Δ / Ε button to select Storage.
Select the desired programme number (0 to 99) with the Φ / Γ
button or NUMBER buttons. Any number under 10 is entered
I
:
DK
:
M
:
(Hong Kong/South Africa)
(East Europe/China/Africa/CIS)
(USA/Korea/Philippines) (option)
Press the ΟΚ button.
10. Press the
11. Press the
0
/
Δ
Ε
/
Φ
button to select Channel.
Γ
button to select
Channel
V/UHF
or
pull-down
possible, select the channel number directly
buttons. Any number under 10 is entered with
Cable
on
the
menu.
If
with the number
a
numeric TM0∏
in
front of it, i.e. TM05∏ for 5.
12. Press the ΟΚ button.
13. Press the
Δ
/
14. Press the
Φ
/
i
M
button to select Search.
button to
menu.
If
commence
searching
on
the Search
station is found the search will stop.
15. Press the ΟΚ button to store it. The display Stored will appear.
pull-down
?
Ε
Γ
a
16. To store another station, repeat steps 4 to 15.
Storage
System
Channel
Fine
Search
Name
V
UHF
1
BG
1
{{{
CO01
Stored
17. Press the Τ?/Α?
viewing.
10
or
ΜΥΛΤΙΜΕΔΙΑ button to return to normal TV
Σεττινγ
υπ Τ? στατιονσ
Ασσιγνινγ α στατιον ναμε
1. Repeat the 'Manual programme tuning' steps
Ε
2.
Press the
Δ
/
3.
Press the
Γ
button and then
+, -,
4.
5.
6.
ProgrammeOedit
FavouriteOprogramme
button to select Name.
/
use Δ
Ε
the numeric 0 to 9 and the
button to select
Στατιον
Μενυ
AutoOprogramme
ManualOprogramme
1 to 3.
a
blank,
A to Z.
alphabet
position by pressing the Φ
()OOKOMENU
/ Γ button and then
Select the next
make your choice of the second character, and so on.
Press the ΟΚ button.
Press the Τ?/Α? or ΜΥΛΤΙΜΕΔΙΑ button to return to normal TV
viewing.
Φινε
Normally
fine
1.
Repeat
2.
Press the
3.
TV/AV MULTIMEDIA
τυνινγ
tuning
is
only necessary
if
reception
MENU
is poor.
the 'Manual programme tuning' steps 1 to 3.
Δ / Ε button to select Fine.
Press the Φ / Γ button to fine tune for the best picture and
PR
sound.
OK
VOL
Storage
System
Channel
V
1
BG
1
UHF
Fine
Search
Name
VOL
PR
{{{
CO01
123
()O}{OOKOMENU
4.
Press the ΟΚ button.
5.
Press the Τ?/Α?
or
456
ΜΥΛΤΙΜΕΔΙΑ button to return to normal TV
viewing.
The finely tuned programme will be
ber during programme selection.
789
indicated
by
a
yellow
num0
?
i
M
11
Σεττινγ
Στατιον
Μενυ
AutoOprogramme
ManualOprogramme
ProgrammeOedit
FavouriteOprogramme
()OOKOMENU
υπ Τ? στατιονσ
Προγραμμε εδιτ
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
2.
3.
press the ΜΕΝΥ button to select the Station menu.
Press the Δ / Ε button to select Programme edit.
Press the ΟΚ button to display the Programme edit menu.
Repeatedly
Δελετινγ
α
προγραμμε
00-
--
--
O05O SO 69
01O CO 03OO 06O SO 17
02O CO 12OO 07O SO 22
03O SO 66OO 08O CO 09
04O SO 67OO 09O CO 11
TV/AV MULTIMEDIA
Delete
Move
LIST
Copy
Skip
()O}{OOKOMENU
Q.VIEW MENU
1.
SelectaprogrammetobedeletedwiththeΔ/Ε
orΦ/Γbut-
ton.
2.
PR
Press the RED button twice.
The selected programme is deleted,
grammes are shifted up one position.
OK
VOL
00-
VOL
--
--
all
the
following
pro-
O05O SO 69
01O CO 03OO 06O SO 17
02O CO 12OO 07O SO 22
PR
03O SO 66OO 08O CO 09
04O SO 67OO 09O CO 11
Delete
MENU
123
Χοπψινγ α προγραμμε
1.
SelectaprogrammetobecopiedwiththeΔ/Ε
456
orΦ/Γbut-
ton.
2.
789
Press the GREEN button.
All the following programmes
are
shifted down
one
Μοπινγ α προγραμμε
1.
SelectaprogrammetobemovedwiththeΔ/Ε
0
position.
orΦ/Γbut-
ton.
2.
3.
4.
Press the YELLOW button.
Move the programme to the desired programme number with
theΔ/ΕorΦ/Γbutton.
Press the YELLOW button again to release this function.
00-
--
--
O05O SO 69
01O CO 03OO 06O SO 17
02O CO 12OO 07O SO 22
03O SO 66OO 08O CO 09
04O SO 67OO 09O CO 11
?
Move0Off
i
()O}{OMENU
M
α προγραμμε νυμβερ
Select a programme number to be skipped with the Δ / Ε or Φ
/ Γ button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped programme.
When a programme number is skipped it means that you will be
unable to select it using the Δ / Ε button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Σκιππινγ
1.
2.
3.
Press the Τ?/Α?
viewing.
12
or
ΜΥΛΤΙΜΕΔΙΑ button to return to normal TV
Σεττινγ
υπ Τ? στατιονσ
Φαπουριτε προγραμμε
This function lets you select your favourite programmes
1.
2.
3.
Στατιον
Μενυ
AutoOprogramme
ManualOprogramme
directly.
press the ΜΕΝΥ button to select the Station menu.
Press the Δ / Ε button to select Favourite programme.
Press the ΟΚ button to display the Favourite programme
ProgrammeOedit
FavouriteOprogramme
Repeatedly
()OOKOMENU
menu.
Off
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
()O}{O OKOMENU
TV/AV MULTIMEDIA
TV/PC
4.
5.
6.
7.
8.
Press the Φ / Γ button to select On.
Press the Δ / Ε button to select
-----.
Select a desired programme with the Φ / Γ button or NUMBER
buttons. Any number under 10 is entered with a numeric TM0∏ in
front of it, i.e. TM05∏ for 5.
To store another programme, repeat steps 5 to 6.
You can store up to 5 programmes.
Press the Τ?/Α? or ΜΥΛΤΙΜΕΔΙΑ button to return to normal TV
--
Q.VIEW MENU
PR
OK
viewing.
Repeatedly
LIST
VOL
press the Θ.?ΙΕΩ button to select stored favourite pro-
VOL
PR
grammes.
Χαλλινγ
τηε προγραμμε ταβλε
123
You can check the programmes stored in the memory
the programme table.
by displaying
ταβλε
Press the ΛΙΣΤ button to display the Programme table menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
456
Δισπλαψινγ προγραμμε
00-
-
-
-
-
789
0
OO05O SO 69
01O CO 03OO 06O SO 17
02O CO 12OO 07O SO 22
03O SO 66OO 08O CO 09
04O SO 67OO 09O CO 11
()O}{OOKOMENU
Νοτε :
Ψου μαψ φινδ σομε βλυε προγραμμεσ. Τηεψ ηαπε βεεν σετ υπ το
βε σκιππεδ βψ αυτο προγραμμινγ ορ ιν τηε προγραμμε εδιτ μοδε.
β. Σομε προγραμμεσ ωιτη τηε χηαννελ νυμβερ σηοων ιν τηε προγραμμε ταβλε ινδιχατε τηερε ισ νο στατιον ναμε ασσιγνεδ.
α.
?
i
M
α προγραμμε ιν τηε προγραμμε ταβλε
Select a programme with the Δ / Ε or Φ / Γ button.
Then press the ΟΚ button.
The set switches to the chosen programme number.
Σελεχτινγ
Παγινγ τηρουγη
There
are
α
προγραμμε ταβλε
10 programme table pages in which contain 100 pro-
grammes.
Pressing the
Δ
/
Press the Τ?/Α?
Ε
or
or Φ
/
Γ
button
repeatedly
turns the pages.
ΜΥΛΤΙΜΕΔΙΑ button to return to normal TV
viewing.
13
Πιχτυρε
Πιχτυρε
Μενυ
Contrast
100
95
85
80
Brightness
Colour
Sharpness
Πιχτυρε
You
can
ness
αδφυστμεντ
αδφυστμεντ
adjust picture contrast, brightness, colour intensity, sharp(NTSC input only) to the levels you prefer.
and tint
()O}{OOKOMENU
1.
Repeatedly press
2.
Press the
Press the
3.
Δ
Φ
/
/
the ΜΕΝΥ button to select the Picture menu.
button to select the desired picture item.
button to make appropriate adjustments.
Ε
Γ
Contrast
Brightness
Colour
Sharpness
85
95
85
80
TV/AV MULTIMEDIA
TV/PC
MENU
4.
Press the Τ?/Α?
PR
picture
User.
ΜΥΛΤΙΜΕΔΙΑ button to return to normal TV
or
viewing.
OK
VOL
Press the ΟΚ button to store it for the
The display Stored appears.
VOL
You
a desired picture (Dynamic, Standard,
User) with ΠΣΜ button on the remote control. The
picture Dynamic, Standard, Mild and Game are programmed
for optimum picture reproduction at the factory and cannot be
changed.
PR
can
also recall
Mild, Game
or
Πιχτυρε φορματ
You
PSM
ARC
can
(οπτιον)
watch TV in various picture formats; Wide, 14:9, 4:3.
the ΑΡΧ button to select your desired picture for-
Repeatedly press
mat.
Wide
You can
enjoy the cinema (the picture format of 16:9) or general TV
programme through the 16:9 mode.
The screen 16:9 is viewed just like that but the screen 4:3 is magnified to the left and right so that the screen 16:9 is full.
?
14:9
You
i
M
enjoy the picture format of 14:9 or
the 14:9 mode.
The screen 14:9 is viewed just like that the
to the upper / lower and left / right.
can
4:3
This
Νοτε
14
general
TV programme
through
picture
:
format is 4 to 3 of
Wide ανδ 4:3
αρε
general
screen
4:3 is
TV.
απαιλαβλε ιν ΠΧ μοδε
ονλψ.
magnified
Σουνδ
Σουνδ
You
αδφυστμεντ
αδφυστμεντ
Equalizer
Balance
AVL
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of equalizer,
balance. If you switch AVL to on, the set automatically keeps on an
equal volume level even if you change programmes.
Σουνδ
Μενυ
0
Off
can
Speech
the ΜΕΝΥ button to select the Sound menu.
/ Ε button to select the desired sound item;
Balance or AVL.
/ Γ button to make desired adjustment.
1.
Repeatedly press
2.
Press the
Δ
Equalizer,
3.
Press the
()OOKOMENU
Φ
TV/AV MULTIMEDIA
TV/PC
Flat
Music
Movie
Speech
User
MENU
0.1O0.5O1.5O5.0O10OKHz
}{O MENU
Press the ΟΚ button in Equalizer to set the Equalizer User.
Press the Δ / Ε button to select your preferred setting ; Flat,
Music, Movie, Speech or User.
To set the Equalizer User,
a. Select User by pressing the Δ / Ε button.
b. Select a sound band by pressing the Φ / Γ button.
c. Select appropriate sound level with the Δ / Ε button.
d. Press the ΟΚ button to store it for the sound User.
The display Stored appears.
Press the Τ?/Α?
or
PR
OK
VOL
VOL
PR
ΜΥΛΤΙΜΕΔΙΑ button to return to normal TV
viewing.
You
can also recall a desired sound setting (Flat, Music, Movie,
Speech or User) with ΣΣΜ button on the remote control. The sound
settings Flat, Music, Movie and Speech are programmed for optimum sound reproduction at the factory and cannot be changed.
Νοτε
μεντ
:
SSM
Ιφ ψου πρεσσ τηε ΣΣΜ βυττον αφτερ μακινγ αππροπριατε αδφυσττηε User συβ μενυ, τηε δισπλαψ User αυτοματιχαλλψ
ον
αππεαρσ
επεν
τηουγη
Flat, Music, Movie
ψου ηαπε
ορ
αλρεαδψ
Speech.
σετ
α
φαχτορψ πρεσετ σεττινγ;
?
i
M
15
Σουνδ
αδφυστμεντ
Στερεο/Δυαλ
ρεχεπτιον
When a programme is selected, the sound information for the station appears after the programme number and station name disap-
pear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
I/II
Μονο σουνδ σελεχτιον
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the Ι/ΙΙ button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the Ι/ΙΙ button twice again.
Λανγυαγε
If
σελεχτιον φορ δυαλ
λανγυαγε
βροαδχαστ
programme is received in two languages (dual language), you
can switch to DUAL I, DUAL II or DUAL I+II by pressing the Ι/ΙΙ
button repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the louda
speakers.
DUAL I+II sends
ΝΙΧΑΜ
a
separate language
to each
loudspeaker.
ρεχεπτιον (οπτιον)
If your set is equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the Ι/ΙΙ button repeatedly.
1.
2.
3.
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
Σουνδ ουτπυτ σελεχτιον
In AV mode, you
can
select output sound for the left and
right
loud-
speakers.
Repeatedly press the Ι/ΙΙ button to select the sound output.
:
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loudspeaker.
L+L :
Audio signal from audio L input is sent to left and right loudspeakers.
R+R :
Audio signal from audio R input is sent to left and right loudspeakers.
L+R
16
Τιμε
σεττινγ
Χλοχκ
Clock
You must set the time
1.
2.
3.
4.
5.
6.
correctly
before
using
on/off time function.
the ΜΕΝΥ button to select the Time menu.
Press the Δ / Ε button to select Clock.
Press the Γ button and then press the Φ / Γ button to select
the desired timer item (hour, minute).
Make desired adjustment with the Δ / Ε button on the desired
timer item.
Press the ΟΚ button.
Press the Τ?/Α? or ΜΥΛΤΙΜΕΔΙΑ button to return to normal TV
Repeatedly press
viewing.
Off
OnOtime
-ι-ι:ι-ι-
Pr.
1
VOL. 30
Off
()O}{OOKOMENU
TV/AV MULTIMEDIA
TV/PC
Οφφ τιμε
The off timer
set time.
1.
2.
3.
4.
5.
6.
7.
MENU
automatically
switches the set to
standby
at the pre-
the ΜΕΝΥ button to select the Time menu.
Press the Δ / Ε button to select Off time.
Press the Γ button and then press the Φ / Γ button to select
the desired timer item (hour, minute).
Make desired adjustment with the Δ / Ε button on the desired
timer item.
Press the Γ button and then Δ / Ε button to select On.
Press the ΟΚ button.
Press the Τ?/Α? or ΜΥΛΤΙΜΕΔΙΑ button to return to normal TV
Repeatedly press
viewing.
Ον τιμε
PR
OK
VOL
1.
3.
4.
5.
6.
7.
the ΜΕΝΥ button to select the Time menu.
Press the Δ / Ε button to select On time.
Press the Γ button and then press the Φ / Γ button to select
the desired timer item; --:--, Pr. or VOL..
Make desired adjustment with the Δ / Ε button on the desired
timer item.
Press the Γ button and then Δ / Ε button to select On.
Press the ΟΚ button.
Press the Τ?/Α? or ΜΥΛΤΙΜΕΔΙΑ button to return to normal TV
VOL
PR
123
456
789
The on timer automatically switches on at the preset time with
desired programme number and volume.
2.
Τιμε
Μενυ
-ι-ι:ι-ι-ι-ι:ι-ι-
OffOtime
0
Repeatedly press
?
i
M
viewing.
Νοτε :
Ιν τηε επεντ οφ ποωερ ιντερρυπτιον (δισχοννεχτιον ορ ποωερ φαιλυρε), τηε χλοχκ μυστ βε ρεσετ.
β. Τωο ηουρσ αφτερ τηε σετ ισ σωιτχηεδ ον βψ τηε ον τιμε φυνχτιον ιτ
ωιλλ αυτοματιχαλλψ σωιτχη βαχκ το στανδβψ μοδε υνλεσσ α βυττον
ηασ βεεν πρεσσεδ.
χ.
Ονχε τηε ον ορ οφφ τιμε ισ σετ, τηεσε φυνχτιονσ οπερατε δαιλψ ατ
τηε πρεσετ τιμε.
α.
17
Οτηερ φυνχτιονσ
Σπεχιαλ
TV
Off
Off
Input
Μενυ
ChildOlock
AutoOsleep
Language
Τ?, Α?, Δ?Δ ανδ ΠΧ μονιτορ μοδεσ
Inputs
can
used when
be set for TV, AV, DVD or PC monitor mode. AV mode is
a video cassette recorder (VCR), or other equipment is
connected to the set.
()O}{OMENU
Νοτε
:
Ωηεν
α
?ΧΡ ισ χοννεχτεδ πια τηε αεριαλ σοχκετ τηε σετ ισ υσεδ
εθυιπμεντ∏ σεχτιον.
ιν Τ? μοδε. Σεε τηε TMΧοννεχτιον οφ εξτερναλ
1.
Repeatedly press
2.
Press the
3.
TV/AV MULTIMEDIA
Press the
Δ
Φ
the ΜΕΝΥ button to select the
Special
/ Ε button to select Input.
/ Γ button to select TV, AV, S-VIDEO
COMPONENT
menu.
(or SAV),
PC.
or
The AV, DVD and PC modes are :
AV
: VCR connected to the Α? of the set
MENU
S-VIDEO
(or SAV)
:
S-VIDEO VCR connected to the Σ-?ΙΔΕΟ
sockets of the set
COMPONENT
ets of the set
PR
PC
VOL
DVD/DTV connected to the Δ?Δ/ΔΤ? ΙΝ sock-
PERSONAL COMPUTER connected to the PC socket of
the set
VOL
4.
PR
:
:
Repeatedly press the
viewing.
Τ?/Α?
or
ΜΥΛΤΙΜΕΔΙΑ button to return
to normal TV
Alternatively you
ing the Τ?/Α? or
123
select the TV, AV, DVD
can
or
PC mode
by press-
ΜΥΛΤΙΜΕΔΙΑ button.
456
In AV, DVD mode, to return to TV mode, press the
789
0
/
Ε or
NUM-
Χηιλδ λοχκ
SLEEP
The TV
?
i
Δ
BER buttons.
M
can
be set
so
that the remote control handset is needed to
control it. This feature
can
the ΜΕΝΥ button to select the
1.
Repeatedly press
2.
Press the
3.
Press the
4.
Press the Τ?/Α?
/
Δ
Φ
/
Γ
Ε
be used to prevent unauthorized
viewing.
Special
menu.
button to select Child lock.
button
or
on
the remote control handset to select On.
ΜΥΛΤΙΜΕΔΙΑ button to return to normal TV
viewing.
With the lock on, the display Child lock on appears on the screen
if any button on the top panel is pressed while viewing the TV.
18
Οτηερ φυνχτιονσ
Βλυε βαχκ
(οπτιον)
If you select On
on
the Blue back
ground appears
on
the
screen
pull-down
when there is
menu, the blue backno or
poor
Σπεχιαλ
TV
Off
Off
Input
ChildOlock
AutoOsleep
Language
Μενυ
signal.
()O}{O MENU
1.
Repeatedly press
2.
Press the
Δ
3.
Press the
Φ
4.
Press the Τ?/Α?
/
/
the ΜΕΝΥ button to select the
Ε
button to select Blue back.
Γ
button to select On
or
or
Special
menu.
Off.
ΜΥΛΤΙΜΕΔΙΑ button to return to normal TV
viewing.
TV/AV MULTIMEDIA
Αυτο
σλεεπ
MENU
If you select Auto sleep On the set will automatically switch itself
to standby mode approximately ten minutes after a TV station stops
broadcasting.
1.
2.
3.
4.
the ΜΕΝΥ button to select the Special menu.
Press the Δ / Ε button to select Auto sleep.
Press the Φ / Γ button to select On.
Press the Τ?/Α? or ΜΥΛΤΙΜΕΔΙΑ button to return to normal TV
Repeatedly press
PR
OK
VOL
viewing.
Σλεεπ
VOL
PR
τιμερ
123
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
456
after the preset time has elapsed.
Press the ΣΛΕΕΠ button to select the number of minutes. The dis-
789
0 will appear on the screen, followed by 10, 20, 30, 60, 90,
play
180
and 240. The timer begins to count down from the number
120,
of minutes selected.
Νοτε
α.
SSM
SLEEP
0
PSM
TEXT
:
Το πιεω τηε
ρεμαινινγ σλεεπ τιμε,
πρεσσ τηε ΣΛΕΕΠ βυττον
ονχε.
β.
σλεεπ τιμε, ρεπεατεδλψ πρεσσ τηε ΣΛΕΕΠ βυττον
0 αππεαρσ.
δισπλαψ
Ιν τηε επεντ οφ ποωερ ιντερρυπτιον (δισχοννεχτιον ορ ποωερ φαιλυρε), τηε σετ ρελεασεσ τηε πρεσετ σλεεπ τιμε.
Το χανχελ τηε
υντιλ τηε
χ.
?
MODE
i
19
Τελετεξτ
Teletext
(οπτιον)
(or TOP text)
is
with the teletext system
Teletext is
a
optional function,
an
can
free service broadcast
information
up-to-the-minute
grammes, share
prices
therefore
only
a
set
receive the teletext broadcast.
on
by
most TV stations which
news,
and many other
gives
weather, television pro-
topics.
can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
The teletext decoder of this TV
TV/AV MULTIMEDIA
Σωιτχη ον/οφφ
Press the ΤΕΞΤ button to switch to teletext. The initial page or last
page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selec-
PR
tion, while the second shows the current page displayed.
Press the ΤΕΞΤ, Τ?/Α? or ΜΥΛΤΙΜΕΔΙΑ button to switch off tele-
PR
text. The
previous
mode reappears.
123
ΣΙΜΠΛΕ τεξτ
456
Παγε
σελεχτιον
1.
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then re-
2.
The
789
enter the correct page number.
0
TEXT
Δ
/
Ε
button
can
be used to select the
Προγραμμινγ
α
MODE
M
fol-
or
FASTEXT mode, press the
Four teletext page numbers of your choice can be colour coded and
selected by pressing the corresponding coloured button on
easily
the remote control handset.
1.
Press
a
2.
Using
the NUMBER buttons, select the page you wish to pro-
3.
4.
20
or
χολουρ βυττον ιν ΛΙΣΤ μοδε
If the TV is in SIMPLE text, TOP text
M
button to switch to LIST mode.
?
preceding
lowing page.
coloured button.
gramme.
Press the ΟΚ button. Then the selected page is stored as the
selected page number with blinking once. From now on, you
can select this page with the same coloured button.
The three other coloured buttons are programmed in this way.
Τελετεξτ
ΤΟΠ τεξτ
(οπτιον)
(οπτιον)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Βλοχκ / γρουπ / παγε σελεχτιον
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the Δ button can be used.
4. The red button permits to return to previous selection.
Alternatively the Ε button can be used.
PR
Διρεχτ παγε σελεχτιον
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
PR
ΦΑΣΤΕΞΤ μοδε
123
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
456
789
Παγε σελεχτιον
i
1. Press the
button to select the index page.
2. You can select the pages which are colour coded along the bottom line with the same coloured buttons.
3. Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
4. The Δ / Ε button can be used to select the preceding or fol-
0
TIME
lowing page.
INDEX
M
21
Τελετεξτ
Σπεχιαλ
?
(οπτιον)
τελετεξτ φυνχτιονσ
ΡΕ?ΕΑΛ
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
ΣΙΖΕ
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
page.
Press this button
PR
again
half of the page.
the bottom half of the
to return to the normal
display.
ΥΠΔΑΤΕ
PR
Displays
the TV
picture
on
the
screen
while
waiting
for the
new
will appear at the top left hand
teletext page. The display
corner of the screen. When the updated page is available then
will change to the page number.
display
Press this button to view the updated teletext page.
123
456
ΗΟΛΔ
Stops
789
the automatic page
change
which will
occur
if
a
tele-
text page consists of 2 or more sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
0
stop symbol is displayed
UPDATE
TIME
SIZE
MIX
HOLD
REVEAL
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
screen
ΜΙΞ
?
Displays
the teletext pages superimposed on the TV
picture off press this button again.
picture.
To switch the TV
M
ΤΙΜΕ
viewing a TV programme, press this button to display
the time at the top right hand corner of the screen. Press this
button again to remove the display. In the teletext mode,
When
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the RED/GREEN,
NUMBER buttons.
change
Press
22
again
to exit this function.
Δ
/
Ε
or
Χοννεχτιον οφ εξτερναλ
You
can
connect additional
etc. to your set.
Examples
such
shown below.
equipment,
are
as
εθυιπμεντ
VCRs, camcorders
Αεριαλ σοχκετ
1.
2.
3.
4.
5.
Connect the RF out socket of the VCR to the aerial socket of
the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the ΠΛΑΨ button on the VCR.
?ΧΡ
Δ?Δ ιν σοχκετσ
1.
2.
3.
Connect the DVD output sockets (Y Cb Cr, Y Pb Pr, Y B-Y R-Y
or Y PB PR) of the DVD to the Δ?Δ/ΔΤ? ΙΝ sockets (Y PB PR) of
the set.
Connect the audio cable from the DVD to the ΑΥΔΙΟ sockets
of the set.
Press the Τ?/Α? or ΜΥΛΤΙΜΕΔΙΑ button to select COMPO-
Δ?Δ
NENT.
4.
Press the ΠΛΑΨ button on the DVD.
The DVD playback picture appears on the
screen.
ΔΤ? ιν σοχκετσ
1.
2.
3.
Connect the SET TOP outputs to the Δ?Δ/ΔΤ? ΙΝ sockets (Y
PB PR) of the set.
Connect the audio cable from the SET TOP to the ΑΥΔΙΟ sockets of the set.
Press the Τ?/Α? or ΜΥΛΤΙΜΕΔΙΑ button to select COMPO-
ΔΤ? Ρεχειπερ
NENT.
Αυδιο/?ιδεο ιν σοχκετσ
1.
2.
3.
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set.
Press the Τ?/Α? button to select AV.
Press the ΠΛΑΨ button on the VCR.
The VCR playback picture appears on the screen.
?ΧΡ
Νοτε : Ιφ ψου ηαπε α μονο ?ΧΡ, χοννεχτ τηε αυδιο χαβλε φρομ τηε
?ΧΡ το τηε ΑΥΔΙΟ Λ/ΜΟΝΟ σοχκετ οφ τηε σετ.
23
Χοννεχτιον οφ εξτερναλ
εθυιπμεντ
Σ-?ιδεο/Αυδιο ιν σοχκετσ
When
connecting
picture quality will
1.
Σ-?ΙΔΕΟ ?ΧΡ
2.
3.
(ΣΑ?) (οπτιον)
an S-VIDEO VCR to the Σ-?ΙΔΕΟ socket, the
be further improved.
Connect the S-Video socket of the VCR to the Σ-?ΙΔΕΟ socket of the set.
Connect the audio cable from the S-VIDEO VCR to the ΑΥΔΙΟ
sockets of the set.
Select S-VIDEO (or SAV) by pressing the Τ?/Α? button repeat-
edly.
4.
Press the ΠΛΑΨ button on the VCR.
The VCR playback picture appears on the
screen.
Ηεαδπηονε σοχκετ
Insert the headphone plug to the headphone socket of the set. You
listen to the sound through the headphone and TV's speaker.
To adjust the headphone volume, press the Φ / Γ button. If you
press the ΜΥΤΕ button, the sound from the headphone and TV's
speaker are switched off.
can
24
Χοννεχτιον οφ ΠΧ
Πιχτυρε
You
can
αδφυστμεντ
adjust picture contrast, brightness,
horizontal/vertical
tion, clock, clock phase, auto-configure and reset
1.
2.
as
you
posiprefer.
Repeatedly press the Τ?/Α? or ΜΥΛΤΙΜΕΔΙΑ button to select
the PC monitor mode.
Press the ΜΕΝΥ button to select the Picture menu.
PC
80
60
0
0
40
13
Input
Contrast
Brightness
H-Position
V-Position
Clock
ClockOOphase
TV/AV MULTIMEDIA
Auto-configure
Reset
()O}{O OKOMENU
MENU
3.
4.
Press the
Press the
Δ
Φ
/
/
Ε
Γ
button to select the desired
button to make appropriate
Η-Ποσιτιον / ?-Ποσιτιον
This function is to adjust
picture item.
adjustments.
PR
picture
to
left/right
and
up/down
as
you
prefer.
VOL
OK
VOL
PR
Χλοχκ
This function is to minimize any vertical bars or stripes visible on
the screen background. And the horizontal screen size will also
123
change.
Χλοχκ Πηασε
This function allows you to remove any horizontal noise and
clear or sharpen the image of characters.
Αυτο-χονφιγυρε
This function is for the automatic adjustment of the screen position, clock and clock phase. The displayed image will disappear
for a few seconds while the Auto-configuration is in progress.
456
789
SSM
SLEEP
0
PSM
TEXT
Νοτε : Σομε σιγναλ φρομ σομε γραπηιχσ βοαρδσ μαψ νοτ φυνχτιον προπερλψ. Ιφ τηε ρεσυλτσ αρε υνσατισφαχτορψ, αδφυστ ψουρ μονιτορ∏σ ποσιτιον, χλοχκ ανδ χλοχκ πηασε μανυαλλψ.
Ρεσετ
This function allows you to return to the good picture reproduction programmed at the factory and cannot be changed.
5.
6.
?
MODE
i
Press the ΟΚ button to store it for the PC monitor picture.
The display Stored appears.
Press the Τ?/Α? or ΜΥΛΤΙΜΕΔΙΑ button to return to PC mode.
25
Χοννεχτιον οφ ΠΧ
ΠΧ ιν σοχκετ
1.
2.
3.
4.
ΠΕΡΣΟΝΑΛ ΧΟΜΠΥΤΕΡ
(Δ-Συβ φαχκ)
Connect the signal cable from the monitor output socket of the
PERSONAL COMPUTER to the PC input socket of the set.
Connect the audio cable from the PC to the ΠΧ ΣΟΥΝΔ socket of the set.
Press the Τ?/Α? or ΜΥΛΤΙΜΕΔΙΑ button to select PC.
Switch on the PC, and the PC screen appears on the set.
The set can be operated as the PC monitor.
Ιφ ψου ηαπε αν Αππλε μαχιντοση, χοννεχτ τηε ?ΓΑ δεσκτοπ
(νοτ συππλιεδ) φρομ τηε 3 ροω 15 πιν το 2 ροω 15 πιν ωιτη τηε
σιγναλ χαβλε ανδ χοννεχτ τηε ?ΓΑ δεσκτοπ βλοχκ το τηε Μαχιντοση.
Νοτε
βλοχκ
:
Δισπλαψαβλε
ΜΟΔΕ
Μονιτορ
Σπεχιφιχατιον
Ρεσολυτιον
Ηοριζονταλ
Φρεθυενχψ(ΚΗζ)
VGA
SVGA
(MAC)
XGA
?ερτιχαλ
Φρεθυενχψ(Ηζ)
640x400(option)
37.9KHz
85Hz
640x480
31.5KHz
60Hz
640x480
35.0KHz
67Hz
640x480
37.9KHz
72Hz
640x480
640x480(option)
37.5KHz
43.3KHz
75Hz
85Hz
800x600
35.2KHz
56Hz
800x600
37.9KHz
60Hz
800x600
48.1KHz
72Hz
800x600
46.9KHz
75Hz
800x600(option)
53.7KHz
85Hz
832x624
49.7KHz
75Hz
1024x768
48.4KHz
60Hz
1024x768
56.5KHz
70Hz
1024x768
60.2KHz
75Hz
(Synchronization input
form
:
separate)
Νοτε :
Ιφ τηε σετ ισ χολδ, τηερε μαψ βε α σμαλλ φλιχκερⓒ ωηεν τηε σετ ισ
σωιτχηεδ ον. Τηισ ισ νορμαλ, τηερε ισ νοτηινγ ωρονγ ωιτη τηε σετ.
β. Ιφ ποσσιβλε, υσε τηε ?ΕΣΑ 1,024ξ768?60Ηζ πιδεο μοδε το
οβταιν τηε βεστ ιμαγε θυαλιτψ φορ ψουρ ΛΧΔ μονιτορ. Ιφ υσεδ
α.
χ.
δ.
ε.
φ.
υνδερ τηε οτηερ ρεσολυτιονσ, σομε σχαλεδ ορ προχεσσεδ πιχτυρεσ
μαψ αππεαρ ον τηε σχρεεν. Τηε σετ ηασ βεεν πρε-αδφυστεδ το
τηε μοδε ?ΕΣΑ 1,024ξ 768?60Ηζ.
Σομε δοτ δεφεχτσ μαψ αππεαρ ον τηε σχρεεν, λικε Ρεδ, Γρεεν
ορ Βλυε σποτσ. Ηοωεπερ, τηισ ωιλλ ηαπε νο ιμπαχτ ορ εφφεχτ ον τηε
μονιτορ περφορμανχε.
Δο νοτ πρεσσ τηε ΛΧΔ σχρεεν ωιτη ψουρ φινγερ φορ α λονγ τιμε ασ
τηισ μαψ ινχυρ σομε αφτεριμαγεσ.
Ωηεν τηε ΠΧ σχρεεν αππεαρσ ον τηε σετ, σομε μεσσαγε μαψ
αππεαρ ον τηε σχρεεν, τηε μεσσαγε ισ διφφερεντ δεπενδινγ ον
Ωινδοω σψστεμ περσιον (Ωιν98, 2000). Ιφ μεσσαγε αππεαρσ,
χλιχκ τηε Νεξτⓒ χοντινυουσλψ υντιλ μεσσαγε χλεαρσ.
Ιφ τηε μεσσαγε
Out of Rangeⓒ αππεαρσ ον τηε σχρεεν, αδφυστ
τηε ΠΧ ασ ιν τηε TMΔισπλαψαβλε Μονιτορ Σπεχιφιχατιον∏ σεχτιον.
ΔΠΜ (Δισπλαψ Ποωερ Μαναγεμεντ) μοδε
When the PC is in the power saving mode, automatically the
itor goes into DPM mode to save the energy.
26
mon-
Τρουβλεσηοοτινγ
χηεχκ λιστ
Σψμπτομσ
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Incorrect
position
Vertical bars
or
stripes
on
background
Horizontal noise
Signal
Cable message appears
Χηεχκ τηεσε ιτεμσ ανδ τρψ το
αδφυστ τηεσε
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
Auto-configure
or
adjust
(VCR only)
the H/V
position
Auto-configure
or
adjust
Clock
Auto-configure
or
adjust
Clock Phase
Is the
Signal
Cable connected
or
loose
27
Download PDF

advertising