Colour Television
OWNER'S MANUAL
Please read this manual
carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
mation to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828VA0464B
cover
require
and
quote this infor-
service.
(MC049A, 112P/Q/R/S TX)
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel / Side panel
4
Basic operation
On and off / Programme selection
8
Volume
adjustment
/ Quick view
Mute function / Auto Demonstration
On
On
screen
language
selection
(option)
9
screen menus
Menu selection
up TV stations
Auto programme tuning
Manual programme tuning
10
Setting
Programme
edit
Favourite programme
Calling the programme table
Picture
adjustment
(Picture Status Memory)
Picture adjustment / Eye (option)
Turbo picture selection (option) /
16
PSM
Sound
Picture format
19
adjustment
SSM (Sound Status Memory) / Sound
Turbo sound selection (option)
Sound
NICAM
adjustment
output selection / Stereo/Dual reception
reception (option)
Time
setting
Setting the
Auto sleep
22
clock /
Setting
the On/Off timer
Other functions
TV and AV modes / Auto AV switching (option)
Child lock / Blue back (option) / Tilt (option)
Degaussing (option) / Games (option) / Sleep timer
23
PIP
26
operation (option)
Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture
Sub picture size / Sub picture freeze
Sub picture position change / Programme scan
On and off /
Teletext (option)
Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions
27
Connection of external equipment
Aerial socket
Audio/Video in/out sockets (option)
Euro scart socket (option)
S-video/Audio in sockets (S-AV) (option)
Component in sockets (option)
Headphone socket (option)
30
Troubleshooting
2
check list
Back
cover
Installation
Power
This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms
ial and mains
or
powercuts, please pull
out the aer-
plugs.
Warning
To prevent fire
moisture.
or
shock hazard, do not expose the set to rain
or
Service
Never
remove
the back
high voltage
properly, unplug it
very
cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω
cover.
For the best
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
the
set is
in
position to allow a free flow
openings on the back cover.
Do not place anything containing liquid on top
cause a fire or could give an electric shock.
placed
a
of air. Do not
cover
the ventilation
of the set, this may
3
Location and function of controls
All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.
POWER
MUTE
11
1
Remote control handset
Before you use the remote control handset,
teries. See the next page.
1
2
3
4
5
6
7
8
9
0
TV/AV
PICTURE
MENU
2
1.
ARC
12 2.
3
SOUND
4
13
OK
TURBO
PR
VOL
VOL
6
PLAY
FF
P/STILL
STOP
REC
7
I/II
SSM
SLEEP
PIP
FAVOURITE
EYE/
10
MIX
TIME
REVEAL
? MODE
SIZE
STILL
POSITION
9/4 PIP
PR
PR
SWAP
M
8.
i
INPUT
20
9.
(With
TELETEXT /
FAVOURITE
or
directly
install the bat-
standby.
select
a
menu
settings.
VCR BUTTONS (option)
control a LG video cassette recorder.
SSM (Sound Status Memory)
recalls your preferred sound setting.
I/II (option)
selects the language during dual
selects the sound output.
PSM (Picture Status
recalls your preferred
language
broadcast
Memory)
picture setting.
10. TELETEXT BUTTONS (option)
These buttons are used for teletext.
For further details, see the 'Teletext' section.
PIP)
11. MUTE
Q.VIEW
switches the sound
TEXT
on or
off.
10
MIX
TIME
REVEAL
? MODE
SIZE
HOLD
UPDATE
INDEX
12. TV/AV
selects TV or AV mode.
switches the set on from
M
i
13. MENU
selects
standby.
a menu.
14. OK
(With
4
TELETEXT / Without
PIP)
number.
(Aspect Ratio Control)
changes the picture format.
adjusts
18
19 7.
TEXT
standby
D / E (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
F / G (Volume Up/Down)
adjusts the volume.
17
Q.VIEW
NUMBER BUTTONS
switches the set on from
5.
16 6.
9
off to
TURBO PICTURE / SOUND BUTTON
selects Turbo picture / sound.
15
PSM
or
4.
LIST
8
standby
ARC
PR
REW
from
on
3.
14
5
POWER
switches the set
please
accepts your selection
or
displays
the current mode.
(option).
Location and function of controls
15. LIST
displays
the programme table.
16. EYE/* (option)
switches the eye function
on or
POWER
off.
11
1
17. SLEEP
sets the
MUTE
sleep
timer.
18. Q.VIEW
returns to the
previously
1
2
3
4
5
6
7
8
9
0
TV/AV
PICTURE
MENU
2
viewed programme.
19. FAVOURITE
selects a favorite programme.
ARC
12
3
SOUND
20. PIP BUTTONS
PIP
4
(option)
switches on or off the programme
sub pictures.
COLOURED BUTTONS
These buttons are used for teletext
programme edit.
scan
(only
mode
OK
14
switches the sub picture on or off.
PR +/selects a programme for the sub picture.
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
9/4 PIP
Battery
13
TURBO
PR
VOL
VOL
5
PR
6
REW
PLAY
FF
P/STILL
STOP
REC
7
I/II
SSM
PSM
SLEEP
LIST
15
8
EYE/
16
9
FAVOURITE
17
Q.VIEW
18
19
through
TELETEXT
4
or
models)
9
or
installation
The remote control handset is powered by two AA type batteries. To
load the batteries, turn the remote control handset over and open
the battery compartment. Install two batteries as indicated by the
polarity symbols ( + and ) marked inside the compartment.
(Without
PIP
-
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
(Without
TELETEXT /
FAVOURITE
SIZE
STILL
PR
PR
PIP)
Q.VIEW
POSITION
9/4 PIP
SWAP
INPUT
TELETEXT / With
20
PIP)
5
Location and function of controls
Front
panel
CF/CT-25/29Q25 series
12
13
1.
MAIN POWER
switches the set
2.
POWER/STANDBY INDICATOR
illuminates brightly when the set
standby mode.
dims when the set is switched on.
ON/OFF
MENU
S-VIDEOL/MN
1
OK
VOL
34
26
5
11
RF/RT-28/32FZ15 series
AUDIO
MENU
R
AV3
on or
off.
PR
OK
VOL
3.
MENU
selects
4.
OK
is
in
a menu.
PR
ON/OFF
accepts your selection
or
the
displays
current mode.
12 6
13
3 4
5.
5
CF/CT-34M25 series
S-VIDEO
VIDEO
L
AV3
adjusts
(L/MONO)
R
MENU
ON/OFF
OK
VOL
26
13 45
REMOTE CONTROL SENSOR
Note : Only use the supplied remote control handset. (When you use others,
they'll be not able to function.)
7.
TV/AV
selects TV or AV mode.
clears the menu from the screen.
switches the set on from standby.
11
AV3
MENU
OK
VOL
PR
VIDEO (L/MONO) AUDIO (R)
ON/OFF
8.
S-VIDEOL/MN
26345
RF/RT-25/29FB35 series
1
AUDIO
settings.
6.
CF/CT-25/29H35 series
12
menu
PR
AUDIO
12
13
D / E (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
F / G (Volume Down/Up)
adjusts the volume.
display.
9.
ON/OFF
R
MENU
OK
VOL
PR
(Function)
selects volume, EYE (option), picture items
or brief auto programme while the menus not
1311
VIDEO L/MONO AUDIO R
AV3
AV3
+/-
(D/E)
adjusts the
function
gramme.
switches the set
AV3
12
126345
on
or
from
selects
a
pro-
standby.
10. TURBO SOUND / PICTURE (option)
switches Turbo sound or Turbo picture
function on or off.
1312
RF/RT-25/29FB95 series
11. EYE
13
(option)
adjusts picture according
ing conditions.
VIDEOL/MN
AUDIO
12634
5
RF/RT-25/29CC25 series
R
12
MENU
OK
VOL
11
to the surround-
12. HEADPHONE SOCKET (option)
Connect the headphone plug to this socket.
13. AUDIO/VIDEO IN SOCKETS (AV3)
Connect the audio/video out sockets of
external equipment to these sockets.
S-VIDEO/AUDIO IN SOCKETS (S-AV)
PR
ON/OFF
(option)
13
VIDEOL/MN
Connect the
VIDEO VCR
Connect the
VIDEO VCR
AV3.
1264
35
RF/RT-25/29FA35 series
AUDIO
video out socket of an
to the S-VIDEO socket.
S-
audio out sockets of the Sto the audio sockets as in
R
AV3
MENU
OK
VOL
Note
PR
ON/OFF
4Kg)
1
6
234
5
6
12 13
11
:
Do not place any heavy objects (over
the RT-25/29FA35 series models.
on
Location and function of controls
RF/RT-25/29CA45 series
MENU
OK
VOL
PR
1.
MAIN POWER
switches the set
2.
POWER/STANDBY INDICATOR
illuminates brightly when the set is in
standby mode.
dims when the set is switched on.
3.
MENU
selects
4.
OK
ON/OFF
12
S-VIDEOL/MN
13
34
126
11
5
CF/CT-25/29M35 series
AUDIO
R
TV/AV
AV3
ON/OFF
VOL
on or
off.
a menu.
accepts your selection
PR
or
current mode.
5.
126789
12
CF/CT-25/29Q45 series
AV3
VIDEO
MENU
PR
VOL
the
D / E (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
F / G (Volume Down/Up)
adjusts the volume.
adjusts
OK
VOL
ON/OFF
L
13
displays
settings.
menu
MONO
AUDIO
6.
REMOTE CONTROL SENSOR
Note : Only use the supplied remote
control handset. (When you use others,
they'll be not able to function.)
7.
TV/AV
selects TV or AV mode.
clears the menu from the screen.
switches the set on from standby.
R
3
1
4 26
5
11
CF/CT-25/29K35 series
12
VIDEO L/MONO AUDIO R
TV/AV
ON/OFF
S-VIDEO
VOL
AV3
8.
VIDEO
13
L/MON
AUDIO
PR
13 12
126789
(Function)
selects volume, EYE (option), picture items
or brief auto programme while the menus
11
CF/CT-25/29Q95 series
not
display.
R
AV3
9.
MENU
VOL
SOUND
OK
PR
PICTURE
TURBO
ON/OFF
+/-
(D/E)
adjusts the
function
gramme.
switches the set
12
13
3 41011
5
126
AV3
RF/RT-25/29FB55 series
S-VIDEOL/MN
AUDIO
VIDEO
MENU
OK
VOL
11
513 12
R
RF/RT-25/29FD15 series
MENU
126
3
OK
a
pro-
standby.
10. TURBO SOUND / PICTURE (option)
switches Turbo sound or Turbo picture
function on or off.
(option)
adjusts picture according
rounding conditions.
AV
2634
from
selects
11. EYE
L AUDIO R
PR
ON/OFF
1
on
or
PR
VOL
4
RF/RT-25/29FB75 series
5
the
12. HEADPHONE SOCKET (option)
Connect the headphone plug to
socket.
sur-
this
13. AUDIO/VIDEO IN SOCKETS (AV3)
Connect the audio/video out sockets of
external equipment to these sockets.
S-VIDEO/AUDIO IN SOCKETS (S-AV)
(option)
Connect the video out socket of an SVIDEO VCR to the S-VIDEO socket.
Connect the audio out sockets of the SVIDEO VCR to the audio sockets as in
AV3.
Note
126345
to
:
Do not
(over 4Kg)
on
place
the
any heavy objects
RT-25/29FA35 series
models.
7
Basic
operation
On and off
1.
2.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, D / E, TV/AV
or NUMBER buttons on the remote control handset to switch it
on
3.
4.
POWER
MUTE
1
2
3
4
5
6
7
8
9
0
TV/AV
MENU
SOUND
fully.
Press the POWER button on the remote control handset.
The set reverts to standby mode.
Press the main power button again to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme
selection
You can select
buttons.
a
Volume
programme number with the D / E
or
NUMBER
adjustment
Press the F / G button to
OK
adjust
the volume.
Quick view
PR
VOL
VOL
Press the Q.VIEW button to view the last programme you
PR
were
watching.
Mute function
Press the MUTE button. The sound is switched off and the
I/II
W appears.
SSM
You can cancel it by pressing the MUTE, F / G, SSM, I/II
TURBO SOUND button.
display
(option),
Q.VIEW
Auto Demonstration
To review all the menus programmed in the set, press the OK button of the side panel control for about 10 seconds. To stop auto
demonstration, press any button of the set and POWER button of
the remote control.
On
screen
language
selection
The menu can be displayed
First select your language.
1.
2.
3.
screen
in desired
language.
menu.
Press the G button to select Language.
Press the G button and then D / E button to select your desired
All the on screen displays will appear in the selected language.
Press the OK or F button to select the Special menu.
Repeatedly press the MENU button to return to normal TV
viewing.
8
the
Press the MENU button and then D / E button to select the
Special
language.
4.
on
(option)
On
The
an
dialogue
operator
screen menus
between you and your set takes place on screen with
The buttons required for the operating steps are
menu.
also
displayed.
Menu selection
1.
Press the MENU button and then D / E button to
display
each
menu.
2.
3.
Press the G button and then D / E button to select a menu item.
Press the G button to display the sub menu or the pull-down
4.
Change
menu.
the
setting
of
an
item in the sub
or
F/GorD/E.
pull-down
menu
with
You can move to the higher level menu with OK or F button and
to move to the lower level menu press the G button.
Note :
a.
In the teletext mode, menus are not displayed.
b.
In some models, the Normal/Turbo search will not display,
only the Start will display in the Auto programme menu.
In some models, Tilt, Game, Booster or Degauss will not disc.
d.
play.
In
some
models, the Language will not display.
Auto programme
Station
BG
AutoOprogramme
ManualOprogramme
{
System
StorageOfrom
{
{
{
I
ProgrammeOedit
FavouriteOprogramme
{
NormalOsearch
{
DK
{
TurboOsearch
{
M
MENU
OK
()O}{O OKOMENU
PR
()O}{OOKOMENU
Station
VOL
VOL
menu
PR
Manual programme
Picture
PSM
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
{
Storage
System
{
Channel
{
Search
{
Name
{
Booster
{
2
()O}{O OKOMENU
()O}{OOKOMENU
Picture
menu
Programme
Sound
SSM
{
AVL
{
DBS
{
Balance
{
edit
O0OOCO03 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
DeleteOOOCopy
MoveOOOOOSkip
()}{O OKOMENU
()O}{O OKOMENU
Sound
menu
Time
Clock
{
Offotime
Onotime
{
Autoosleep
{
{
()O}{O OKOMENU
T ime
menu
Special
Language
Input
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
{
Game
{
{
()O}{OOKOMENU
Special
menu
TV programme
9
TV stations
Setting up
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the D / E
or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Note
:
In
some
models up to 200 TV stations
Auto programme
()O}{OOKOMENU
can
be stored.
tuning
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1.
2.
Press the MENU button to select the Station menu.
Press the G button and then D / E button to select Auto pro-
gramme.
3.
1
2
Press the G button to
3
display
the Auto programme
menu.
Auto programme
4
7
5
8
6
9
System
StorageOfrom
{
{
I
NormalOsearch
{
DK
TurboOsearch
{
M
BG
0
MENU
()O}{OOKOMENU
OK
4.
Press the G button. Select a TV system with the D / E button
the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the F button.
Press the D / E button to select Storage from.
Press the G button. Select the beginning programme number
with the F / G button or NUMBER buttons on the Storage
from pull-down menu. Any number under 10 is entered with a
numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5.
Press the OK button.
Press the D / E button to select Normal or Turbo search.
on
PR
VOL
VOL
PR
5.
6.
7.
8.
9.
Option:
In
some
models, you
can
only
select Start.
Note :
a.
Turbo search is faster than Normal search and in some
models, these searches will automatically store all receivable
stations.
b.
If the programmed station has poor quality sound, select the
system again in the Manual programme menu.
10. Press the G button to begin auto programming.
All receivable stations are stored.
Auto programme
Auto programme
System
StorageOfrom
{
NormalOsearch
{
TurboOsearch
{
{
OOCO01O(BG)
7
MENU
System
StorageOfrom
{
NormalOsearch
{
TurboOsearch
{
36%
{
OOCO01O(BG)
7
36%
MENU
(Normal search)
(Turbo search)
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
11. Repeatedly press the MENU button to return to normal TV
viewing.
10
Setting up
Manual programme
TV stations
Station
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
2.
Press the MENU button to select the Station menu.
Press the G button and then D / E button to select Manual
3.
programme.
Press the G button to
display
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
()O}{OOKOMENU
the Manual programme
menu.
Manual programme
Storage
System
{
Channel
{
Search
{
Name
{
Booster
{
2
{
1
2
3
4
5
6
7
8
9
()O}{OOKOMENU
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
0
Press the D / E button to select Storage.
Press the G button to select the programme number. Select the
desired programme number (0 to 99) with the F / G button or
NUMBER buttons on the Storage pull-down menu. Any number under 10 is entered with a numeric '0' (or '00') in front of it,
i.e. '05' (or '005') for 5.
Press the OK button.
Press the D / E button to select System.
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or F button.
Press the D / E button to select Channel.
Press the G button. Press the D / E button to select V/UHF
or Cable on the Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
Press the OK or F button.
Press the D / E button to select Search.
Press the G button. Press the F / G button to commence
searching on the Search pull-down menu. If a station is found
the search will stop.
Press the OK button to store it. The display Stored will appear.
MENU
OK
PR
VOL
VOL
PR
Manual programme
Storage
System
{
Channel
{
Search
{
Name
{
Booster
{
{
{{{
Stored
16. To store another station, repeat steps 4 to 15.
17. Repeatedly press the MENU button to return to normal TV
viewing.
11
Setting up
TV stations
AutoOprogramme
ManualOprogramme
{
{
Assigning a station name
1. Repeat the 'Manual programme tuning' steps
ProgrammeOedit
FavouriteOprogramme
{
2.
Station
{
3.
Press the D / E button to select Name.
Press the G button on the Name pull-down
4.
Press the D button. You
and the
()O}{OOKOMENU
alphabet
can use a
blank,
6.
your choice of the second character, and
Press the OK button.
Repeatedly press
viewing.
can
pressing
(option)
In
models, Booster is
can
perform
opposite direction.
the F / G button and then take
so on.
the MENU button to return to normal TV
Booster
Booster
+, -, the numeric 0 to 9
select in the
5.
some
menu.
A to Z.
With the E button you
Select the position by
7.
1 to 3.
an
optional
function.
Only
a
set with
this function.
MENU
OK
If the reception is poor at the fringe area of TV signal, select
Booster to On. When the picture condition is good, do not select
Booster to On.
PR
VOL
VOL
PR
1
2.
3.
4.
the 'Manual programme tuning' steps 1 to 3.
Press the D / E button to select Booster.
Press the G button.
Repeat
Press the D / E button to select On
down
12
or
Off
on
the Booster
pull-
menu.
5.
Press the OK button.
6.
Repeatedly press
viewing.
the MENU button to return to normal TV
Setting up
Programme
TV stations
Station
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
2.
3.
Press the MENU button to select the Station menu.
Press the G button and then D / E
button to select
Programme edit.
Press the G button to display the Programme edit menu.
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
()O}{OOKOMENU
Programme edit
OOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
1
2
3
4
5
6
7
8
9
O4OOSO67OOO9OOCO11
DeleteOOOCopy
MoveOOOOOSkip
()}{OOKOMENU
Deleting
1.
2.
programme
Select a programme to be deleted with the D / E or F / G button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
Copying
1.
2.
a programme
Select a programme to be copied with the D / E
Press the GREEN button.
All the following programmes are shifted down
Moving
1.
2.
3.
0
a
MENU
PR
or F
one
/ G button.
VOL
VOL
PR
position.
a
programme
Select a programme to be moved with the D / E or F / G button.
Press the YELLOW button.
Move the programme to the desired programme number with
theD/EorF/Gbutton.
4.
Press the YELLOW button
again
to release this function.
Programme edit
OOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
MoveOOff
()}{OOMENU
a programme number
Select a programme number to be skipped with the D / E or F / G
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that
you will be unable to select it using the D / E button during normal TV viewing. If you want to select the skipped programme,
directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu.
Skipping
1.
2.
3.
Repeatedly press
the MENU button to return to normal TV
viewing.
13
Setting up
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
TV stations
Favourite programme
{
{
This function lets you select your favorite programmes
directly.
1.
Press the MENU button to select the Station
2.
Press the G button and then D / E button to select Favourite
3.
programme.
Press the G button to
()O}{OOKOMENU
display
menu.
the Favourite programme
menu.
Favourite programme
1
2
3
4
5
6
7
8
9
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
56n Ca 05
{
}{O0_9O()OOKOMENU
0
4.
MENU
5.
OK
VOL
PR
--
6.
To store another programme, repeat steps 4 to 5.
You can store up to 8 programmes.
7.
Press the OK button.
8.
Repeatedly press
viewing.
PR
VOL
-----.
Press the D / E button to select
Select a desired programme with the F / G button or NUMBER
buttons. Any number under 10 is entered with a numeric '0' in
front of it, i.e. '05' for 5.
Repeatedly press
programmes.
LIST
FAVOURITE
14
the MENU button to return to normal TV
the FAVOURITE button to select stored favourite
Setting up
Calling
TV stations
the programme table
You
can check the programmes stored in the memory
the programme table.
programme table
Press the LIST button to display the
by displaying
Displaying
Programme
The programme table appears on the screen.
table contains ten programmes as below.
table
menu.
One programme
Programme edit
OOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
()}{OOKOMENUOOLIST
Note
a.
:
You may find some blue programmes. They have been set up
to be skipped by auto programming or in the programme edit
mode.
b.
OK
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
PR
VOL
VOL
Selecting
programme in the programme table
Select a programme with the D / E or F / G button.
a
PR
Then press the OK button.
The set switches to the chosen programme number.
Paging through a programme table
are 10 (or 20) programme table pages which contain 100 (or
200) programmes.
Pressing the D / E or F / G button repeatedly turns the pages.
There
LIST
FAVOURITE
Press the LIST button to return to normal TV
viewing.
15
Picture
adjustment
Note: Picture
Picture
PSM
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
PSM
1.
2.
()O}{OOKOMENU
3.
menu
options
are
not available for RGB
input source.
(Picture Status Memory)
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button to select PSM.
Press the G button and then D / E button to select a picture
setting on the PSM pull-down menu.
Picture
PSM
{
Dynamic
Contrast
{
Standard
Brightness
{
Mild
Colour
{
Game
Sharpness
{
User
()O}OOKOMENU
MENU
or F
4.
Press the OK
5.
Repeatedly press
viewing.
button.
the MENU button to return to normal TV
OK
You
PR
VOL
VOL
PR
also recall
a desired picture (Dynamic, Standard,
User) with PSM button on the remote control. The
picture Dynamic, Standard, Mild and Game are programmed
for good picture reproduction at the factory and cannot be changed.
can
Mild, Game
Picture
You
can
ness
1.
PSM
FAVOURITE
2.
or
adjustment
adjust picture contrast, brightness, colour intensity, sharp(NTSC input only) to the levels you prefer.
and tint
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select Contrast,
Brightness, Colour or Sharpness.
PSM
PSM
Contrast
{
Brightness
{
Colour
{
Sharpness
{
{
100
()O}{OOKOMENU
3.
Press the G button and then F / G button to make
on the each sub menu.
appropriate
adjustments
Contrast
80
}{O()OOKOMENU
4.
5.
Press the OK button to store it for the picture user.
Repeatedly press the MENU button to return to normal TV
viewing.
16
Picture
adjustment
Eye (option)
is
Eye
an
optional
function.
Only
a
set with eye
option
can
perform
this function.
In
some
ing
models, the set will automatically adjust the picture accord-
to the
surrounding conditions. This will enable you
picture according to the surroundings.
to
enjoy
the
most suitable
Press the EYE/* button to switch the eye function
on or
off.
Off
ARC
When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.
At this time the
ously
condition
Note
a.
b.
display
display
changes.
but the
in
in green does not appear continueach time the picture
yellow appears
PICTURE
TURBO
:
If you press the PSM or TURBO PICTURE button with the eye
function, the eye function is automatically switched off.
EYE function is not available for RGB input source.
Turbo
picture
selection
(option)
EYE/
When this function is on, the
tinct than normal picture.
Repeatedly press
a.
b.
will be
more
brilliant and dis-
the TURBO PICTURE button to switch
(Turbo Picture off)
Note
picture
on or
off.
(Turbo Picture on)
:
If you press the PSM button with the Turbo picture function, the
Turbo picture function is automatically switched off.
TURBO PICTURE function is not available for RGB input
source.
17
Picture
adjustment
Picture format
You can watch TV in various picture formats; 4:3, 16:9 (Wide) or
Zoom.
Repeatedly press the ARC button to select your desired picture format.
4:3
This
picture
16:9
You can
format is 4 to 3 of
general
enjoy the cinema (the picture
through the 16:9 mode.
TV.
format of
16:9)
or
general
TV
programme
ARC
Zoom
You can enjoy the cinema in a vast screen through the Zoom mode.
The screen 4:3 is magnified to the upper/lower and left/right sides
so that the screen 16:9 is full. The bottom and top of the picture
may be lost.
Note : In the 1/2 size sub
not available.
18
picture of PIP mode
the
picture format
is
Sound
SSM
You
Sound
(Sound Status Memory)
can
Speech
1.
adjustment
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of equalizer.
Press the MENU button and then D / E
Sound
button to select the
SSM
{
AVL
{
DBS
{
Balance
{
()O}{OOKOMENU
menu.
2.
Press the G button to select SSM.
3.
Press the G button and then D / E button to select
ting on the SSM pull-down menu.
a
sound set-
Sound
SSM
{
Flat
AVL
{
DBS
{
Music
Movie
Balance
{
Speech
User
{
()O}OOKOMENU
Sound
Frequency Adjustment
a. Press the G button in User to
MENU
SOUND
display
the User sub
menu.
TURBO
OK
PR
VOL
VOL
PR
0.1O0.5O1.5O5.0O10OkHz
()O}{OOKOMENU
b. Select
a
sound band
by pressing
the F / G button.
c. Make appropriate sound level with the D / E button.
d. Press the OK button to store it for the sound User.
Repeatedly press
You
can
Speech
also
or
the MENU button to return to normal TV
recall
User)
a
desired
sound
with SSM button
on
SSM
viewing.
(Flat, Music, Movie,
the remote control. The
sound Flat, Music, Movie and Speech are programmed for
good sound reproduction at the factory and cannot be changed.
Note
:
If you press the SSM button after making appropriate adjustthe User sub menu, the display User automatically
ment on
appears
even
though you have already
or Speech.
set a
factory preset setting;
Flat, Music, Movie
19
Sound
Sound
Sound
SSM
{
AVL
{
DBS
{
Balance
{
adjustment
adjustment
adjust balance, AVL (Auto Volume Leveler), DBS or headvolume/sound. AVL automatically keeps on an equal volume
level even if you change programmes. If you switch DBS to on, the
set creates a dynamic bass sound. The Turbo sound creates an all
around sound as in a concert hall.
You
can
phone
()O}{OOKOMENU
1.
2.
3.
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select the desired
sound item; AVL ,DBS or Balance.
Make desired adjustment with the F / G, D / E or OK button
on each pull-down menu.
Sound
SSM
{
AVL
{
DBS
{
Balance
{
OOO0
ARC
MENU
SOUND
}{OOKOMENU
TURBO
OK
Press the OK button.
Repeatedly press the MENU button to return to normal TV
4.
5.
viewing.
PR
VOL
VOL
PR
Turbo sound selection (option)
When this function is on, the sound will be more emphasized and
amplified than normal sound.
Repeatedly press the TURBO SOUND button to switch on or off.
I/II
SSM
(Turbo Sound off)
(Turbo Sound on)
Sound output selection
In AV mode, you
speakers.
can
select output sound for the left and
right
loud-
Repeatedly press the I/II button to select the sound output.
:
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loudspeaker.
L+L :
Audio signal from audio L input is sent to left and right loudspeakers.
R+R :
Audio signal from audio R input is sent to left and right
loud-speakers.
L+R
20
Sound
Stereo/Dual
adjustment
reception
When a programme is selected, the sound information for the station appears after the programme number and station name disap-
pear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button twice again.
Language
If
selection for dual
language
broadcast
programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II buta
ton
repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
If your set is equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
2.
3.
I/II
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL I,
NICAM DUAL II or NICAM DUAL I+II or MONO. When FM
mono is selected the display MONO appears on the screen.
21
Time
Setting
T ime
Clock
{
OffOtime
OnOtime
{
AutoOsleep
{
1.
{
2.
3.
Setting
the clock
Press the MENU button and then D / E button to select the
Time menu.
Press the G button to select Clock.
Press the G button and then D / E button to adjust the hour.
Time
()O}{OOKOMENU
1
2
3
4
5
6
8
9
4.
MENU
{
Autoosleep
{
-i-o:o-i-
{
6.
Press the G button and then D / E button to adjust the minute.
Press the OK button.
Repeatedly press the MENU button to return to normal TV viewing.
Setting
0
{
Offotime
Onotime
()O}{OOKOMENU
5.
7
Clock
the On/Off timer
By using this function, the set automatically switches on or off at a
preset time. You must set the time correctly before using on/off time
function.
OK
1.
PR
VOL
VOL
2.
PR
3.
Press the MENU button and then D / E button to select the
Time menu.
Press the G
button and then D / E button to select Off
time/On time.
Press the G button and then D / E button to adjust the hour.
Time
Clock
{
Offotime
Onotime
{
{
-i-o:o-i-
Autoosleep
{
Pr
01
Vol.30
Off
()O}{OOKOMENU
4.
5.
Press the G button and then D / E button to adjust the minute.
Only On time function; Press the G button and then D / E
button to adjust programme number and volume level.
6.
Press the OK.
7.
Repeatedly
press the MENU button to return to normal TV
viewing.
Note :
a.
On time works only in standby mode.
b.
To view the remaining on/off time, select the Time menu.
c.
When you switch the main power off, the Clock is reset
Auto
.
sleep
If you select On on the Auto sleep pull-down menu, the set will
automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting.
1.
2.
3.
22
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Auto sleep.
Press the G button and then D / E button to select On or Off on
the Auto sleep pull-down menu.
or F button.
press the MENU button to return to normal TV
4.
Press the OK
5.
Repeatedly
viewing.
Other functions
TV and AV modes
Special
be set for TV or AV mode. AV mode is used when a video
cassette recorder (VCR), or other equipment is connected to the set.
Inputs
can
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
Press the MENU button and then D / E
Special
2.
3.
Language
Input
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
{
Game
{
{
button to select the
()O}{OOKOMENU
menu.
Press the G button and then D / E button to select Input.
Press the G button and then D / E button to select TV, AV1, AV2,
AV3, S-VIDEO (option) or COMPONENT (option) on the Input
pull-down
menu.
Special
Language
Input
{
{
TV
Childolock
{
AV1
Blueoback
{
AV2
Tilt
{
AV3
Degauss
{
S_VIDEO
Game
{
COMPONENT
1
2
3
4
5
6
7
8
9
0
TV/AV
()O}OOKOMENU
4.
AV1 : VCR connected to the Euro scart socket or phone jack of
the set
AV2 : VCR connected to the AV2 sockets of the set
AV3 : VCR connected to the AV3 sockets of the set
S-VIDEO : S-VIDEO VCR connected to the S-VIDEO sockets
of the set (option)
COMPONENT : DVD Player connected to the COMPONENT
sockets on the set (option)
Repeatedly press the MENU button to return to normal TV view-
MENU
OK
PR
VOL
VOL
PR
ing.
Alternatively you
can
select the TV
or
AV mode
button.
In AV
to return to TV
mode,
mode, press the
by pressing
the TV/AV
D / E or NUMBER but-
tons.
Auto AV
switching (option)
If your VCR outputs switching voltage when it is switched to playback
with the VCR connected to the Euro scart socket. The set is automatically switched to AV1 mode when an AV signal is input. But if you
want to keep on watching TV mode, press the D / E or NUMBER buttons. Press the TV/AV button to return to AV modes.
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
Press the MENU button and then D / E
Special
2.
3.
4.
5.
button to select the
menu.
Press the G button and then D / E button to select Child lock.
Press the G button and then D / E button to select On or Off on
the Child lock pull-down menu.
or F button.
press the MENU button to return to normal TV view-
Press the OK
Repeatedly
ing.
With the lock on, the display Child lock appears on the screen if any
button on the front panel is pressed while viewing the TV.
Note : The display Child lock will not appear on the screen if any
button on the front panel is pressed while displaying the menus.
23
Other functions
Blue back
Special
Language
Input
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
{
Game
{
{
If you select On
on
ground appears
on
1.
2.
3.
4.
5.
the Blue back pull-down menu, the blue backthe screen when there is no or poor signal.
Press the MENU button and then D / E
Special
()O}{OOKOMENU
(option)
button to select the
menu.
Press the G button and then D / E button to select Blue back.
Press the G button and then D / E button to select On or Off on
the Blue back pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
Tilt
(option)
The TV
another
MENU
1.
picture may tilt to the
position. This function
2.
3.
PR
VOL
VOL
PR
4.
5.
or right if the TV set moves to
be used to compensate the tilt.
Press the MENU button and then D / E
Special
OK
left
can
button to select the
menu.
Press the G button and then D / E button to select Tilt.
Press the G button and then F / G button to adjust the tilt
Tilt pull-down menu.
on
the
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
Degaussing (option)
Owing to the super large Tube in the set. The colour purity of the
picture may be affected by other magnetic influences such as
speakers. Stripes may appear on the screen or there may be colour
patches.
1.
Press the MENU button and then D / E
Special
2.
3.
4.
5.
button to select the
menu.
Press the G button and then D / E button to select Degauss.
Press the G button and then D / E button to select On on the
Degauss pull-down menu. After the degauss function works,
On mode switches to Off mode.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
Note : If you cannot adjust the
it again after about 4 minutes.
24
screen
condition
by degaussing, try
Other functions
Games
(option)
Game is an
function by
1.
optional function, only
using
3.
4.
a
set with game can
perform
this
the remote control handset.
Press the MENU button and then D / E
Special
2.
Special
button to select the
menu.
Language
Input
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
{
Game
{
{
()O}{OOKOMENU
Press the G button and then D / E button to select Game.
Press the G button to enter the game mode.
Press the D / E button to select a game and then press the OK
button.
You can enjoy the game by using the GAME owner's manual.
Note :
a.
Press the TV/AV
or
MENU button to return to the normal TV
viewing.
b.
If you want
the game.
a new
game, press the RED button to start
during
MENU
Sleep
timer
OK
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time elapses.
Repeatedly press the SLEEP button to select the number of minwill appear on the screen, followed by 10,
utes. The display
20, 30, 60, 90, 120, 180 and 240. The timer begins to count down
from the number of minutes selected.
-
Note :
a.
To view the
-
PR
VOL
VOL
PR
-
remaining sleep time, press
the SLEEP button
SLEEP
once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
until the display
appears.
When you switch the set off, the set releases the preset sleep
time.
-
c.
-
-
25
PIP
operation (option)
Option
PIP is
optional function,
so
that
only
the set with PIP function
operate.
can
PIP
:
an
in
(Picture
Picture) displays
a
within
picture
a
picture.
On and off
Press the PIP button to switch on the sub
press this button again to switch it off.
Input
mode selection for sub
picture.
picture
Press the INPUT button to select the
input
mode for the sub
pic-
mode for the sub
pic-
ture.
Each time this button is pressed, each
displayed as shown below.
input
ture is
Programme
number
S-VIDEO
Swapping
AV2
AV1
AV3
(option)
between main and sub
Press the SWAP button to
Programme
exchange
selection for sub
pictures
the main and sub
pictures.
picture
Press the PR +/- button. The selected programme number is displayed just below the programme number of main picture.
Sub
picture
size
Repeatedly press the SIZE button to select the desired sub
size. The sub picture appears as below.
1/16 size of the main
PIP
Note
ture
: When the sub picture
quality might get poor.
Sub
SIZE
PR
STILL
PR
POSITION
SWAP
9/4 PIP
INPUT
picture
picture
1/9 size
1/2 size
size is 1/2 of the main
(option)
picture,
the
pic-
freeze
Press the STILL button to freeze motion of the sub
Press this button again to restore motion.
Sub
picture
picture.
picture position change
Press the POSITION button repeatedly until desired
achieved. The sub picture moves clockwise.
Programme
position
is
scan
This function enables you to search all the stored stations in 4 or 9
sub pictures mode only and see your favorite station by exchanging the main and sub pictures.
Press the 9/4 PIP button to select 4 or 9 sub pictures.
the selected 4 or 9 sub pictures search all the stored stations.
Press the 9/4 PIP button again to switch off these sub pictures.
Only
26
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
a
set
free service broadcast by most TV stations which gives
information on news, weather, television programmes, share prices and many other topics.
Teletext is
a
up-to-the-minute
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
Switch on/off
Press the TEXT button to switch to teletext.
If TV and text picture are displayed half and half of the screen,
press the TEXT button again to display text picture fully.
The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT button to switch off teletext. The previous mode
1
2
3
4
5
6
7
8
9
0
TV/AV
OK
PR
reappears.
PR
SIMPLE text
selection
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The D / E button can be used to select the preceding or fol-
Page
1.
2.
lowing page.
TEXT
Programming colour button in LIST mode
M button to switch to LIST mode.
Press the
a
(option)
M
Four teletext page numbers of your choice can be colour coded and
selected by pressing the corresponding coloured button on
the remote control handset.
1. Press a coloured button.
2. Using the NUMBER buttons, select the page you wish to pro-
easily
3.
4.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number with blinking once. From now on, you
can select this page with the same coloured button.
The three other coloured buttons are programmed in the same
way.
27
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
1
2
3
4
5
6
7
8
9
Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the D button can be used.
4. The red button permits to return to previous selection.
Alternatively the E button can be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
0
TOP mode.
FASTEXT
PR
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
PR
selection
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The D / E button can be used to select the preceding or fol-
Page
1.
2.
3.
4.
lowing page.
i
28
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
page.
Press this button
again
half of the page.
the bottom half of the
to return to the normal
display.
1
2
3
4
5
6
7
8
9
0
UPDATE
Displays
the TV
picture
on
the
screen
teletext page. The display
corner of the screen. When the
while
waiting
for the
new
will appear at the top left hand
updated page is available then
will change to the page number.
Press this button to view the updated teletext page.
display
PR
PR
HOLD
the automatic page
Stops
change
which will
occur
if
a
tele-
text page consists of 2 or more sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
stop symbol is displayed
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
screen
MIX
Displays
the teletext pages
superimposed
on
the TV
pic-
?
ture.
To switch the TV
Note
picture off press this button again.
When TV and text picture are displayed half and half
:
of the screen, MIX function is not available.
TIME
viewing a TV programme, press this button to display
the time at the top right hand corner of the screen. Press this
button again to remove the display. In the teletext mode,
When
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the RED/GREEN, D / E
NUMBER buttons.
change
Press
again
or
to exit this function.
29
Connection of external
You
can connect additional
etc. to your set.
ANT IN
LL 75‰
equipment
equipment,
such
as
VCRs, camcorders
Here shown may be somewhat different from your set.
1
OUT
VIDEO
(L/MONO)AUDIO(R)
IN2
AV1
AV2
Aerial socket
VCR
1.
2.
3.
ANT IN
L L 75‰
PB
Y
OUT
VIDEO
(L/MONO)AUDIO(R)
PR
COMPONENTINPUT(480)
VDEO
IN1
4.
(L/MONO)AUDIO(R)
IN2
AV1
AV2
5.
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on the programme number 0 using the
'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
VCR
Audio/Video in/out sockets
1.
ANT IN
L L 75‰
Y
OUT
VIDEO
L/MONO)AUDIO(R)
PB
PR
COMPONENTINPUT(480)
VDEO
IN1
(L/MONO)AUDIO(R)
2.
IN2
AV1
AV2
3.
VCR
(option)
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to out sockets
of the set.
If the VCR is connected to the AV sockets on the set, press the
TV/AV button to select AV 1, AV 2 or AV 3.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
You
can
also record programmes received
out sockets.
by
the TV
on
video
tape via audio/video
Euro scart socket
1.
2.
VCR
S-VIDEO
(option)
Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
Press the PLAY button on the VCR.
If your VCR outputs a switching voltage when connected to
Euro scart socket, the set will switch to AV 1 mode automatically. But if you want to keep on watching TV mode, press the
D / E or NUMBER buttons.
Otherwise press the TV/AV button
set to select AV 1. The VCR
L/MON
on
the remote control handon the
playback picture appears
screen.
AUDIO
R
AV3
You
VCR
OUT
VIDEO
(L/MONO)AUDO(R)
IN2
VCR
30
by
the TV
on
video
Note : Signal type RGB, i.e. the signals red, green and blue can
only be selected for the Euro scart socket. These signals are transmitted, for example, by a pay TV decoder, game machine or photo
CD unit, etc.
1
AV1
also record programmes received
tape.
ANT IN
L L 75‰
can
AV2
Connection of external
S-video / Audio in sockets
When
connecting
picture quality will
1.
2.
3.
4.
2.
3.
4.
(S-AV) (option)
an S-VIDEO VCR to the S-VIDEO socket, the
be further improved.
Connect the S-video socket of the VCR to the S-VIDEO socket
of the set.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets of the set.
Select S-VIDEO by pressing the TV/AV button repeatedly.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
Component
1.
equipment
in sockets
S-VIDEO VCR
S-VIDEO
(option)
L/MON
AUDIO
Connect the COMPONENT video output sockets (Y Cb Cr, Y
Pb Pr or Y B-Y R-Y) of the COMPONENT (480i) to the COMPONENT INPUT sockets (Y PB PR) on the set.
Connect the audio cable from the COMPONENT to AUDIO IN
sockets of AV2.
Press the TV/AV button to select COMPONENT.
Press the PLAY button on the COMPONENT.
The COMPONENT playback picture appears on the screen.
R
AV3
S-VIDEO VCR
ANT IN
LL 75‰
Y
OUT
VIDEO
(L/MONO)AUDIO(R)
PB
socket
(L/MONO)AUDIO(R)
IN2
AV1
Headphone
PR
COMPONENTINPUT(480i)
VIDEO
IN1
AV2
(option)
Only models which have a headphone socket can perform this
function.
Insert the headphone plug to the headphone socket of the set.
You can listen to the sound through the headphones.
If you press the MUTE button, the sound from the
switched off.
headphone's
COMPONENT
is
S-VIDEOL/MN
AUDIO
R
AV3
31
Troubleshooting
check list
Symptoms
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
Check aerial
(broken lead?)
into
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
advertising