LG | RT-32FZ60RB | LG RT-32FZ60RB Owner’s Manual

Colour Television
OWNER'S MANUAL
Please read this manual
carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
mation to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828VA0446D
(MC036A,
cover
require
112D/E TX,
and
quote this infor-
service.
486-395A)
b
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view
Mute function / Auto Demonstration
On screen language selection (option)
7
On
8
screen menus
Menu selection
up TV stations
Auto programme tuning
Manual programme tuning
Fine Tuning / Programme edit
Favourite programme
Calling the programme table
Setting
Picture adjustment
PSM (Picture Status Memory)
Picture adjustment
Picture format / Eye (option)
Turbo picture selection (option)
14
Sound adjustment
SSM (Sound Status Memory) / Sound adjustment
Turbo sound selection (option)
Sound output selection / Stereo/Dual reception
NICAM reception (option)
17
Time
20
setting
Setting the
Auto sleep
clock /
Setting
the On/Off timer
Other functions
TV and AV modes / Auto AV switching (option)
Child lock / Blue back (option)
Tilt / Degaussing (option) / Sleep timer
21
PIP
23
Teletext (option)
Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions
24
Connection of external equipment
Aerial socket
Euro scart sockets (option)
Audio/Video in sockets (option)
S-Video/Audio in sockets (S-AV) (option)
Component in sockets (option)
Monitor out sockets
27
operation (option)
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture
Sub picture size / Sub picture freeze
Sub picture position change / Programme scan
RF out sockets
Headphone socket
Troubleshooting
2
9
(option)
check list
31
Installation
Power
This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms
ial and mains
or
powercuts, please pull
out the aer-
plugs.
Warning
To prevent fire
moisture.
Do not
cause
or
shock hazard, do not expose the set to rain
or
of the set, this may
place anything containing liquid on top
a fire or could give an electric shock.
Service
Never
remove
the back
high voltage
properly, unplug it
very
of the set
this
expose you to
and other hazards. If the set does not operate
cover
as
can
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω
cover.
For the best
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
set is
placed
the ventilation
in
position to allow a free flow
openings on the back cover.
a
of air. Do not
cover
3
Location and function of controls
All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.
Remote control handset
Before you use the remote control handset,
teries. See the next page.
POWER
please
install the bat-
MUTE
11 1.
1
1
2
3
2.
4
5
6
7
8
9
0
TV/AV
2
ARC
3.
12 4.
3
SOUND
MENU
PICTURE
13
4
OK
TURBO
POWER
switches the set
from
standby
or
off to
NUMBER BUTTONS
switches the set on from
standby
or
directly
on
standby.
select
a
number.
ARC
(Aspect Ratio Control)
changes the picture format.
TURBO SOUND BUTTON
selects Turbo sound.
TURBO PICTURE BUTTON
selects Turbo picture.
14
5.
PR
5
VOL
PR
6
PLAY
FF
adjusts
P/STILL
I/II
SSM
SLEEP
EYE/
16
9
TEXT
PIP
17 8.
Q.VIEW
18
19
10
MIX
TIME
REVEAL
? MODE
PR
STILL
PR
VCR BUTTONS
control a LG video cassette recorder.
POSITION
SWAP
SCAN
SSM (Sound Status Memory)
recalls your preferred sound setting.
I/II
selects the language during dual language broadcast.
selects the sound output (option).
M
9.
SIZE
settings.
LIST
15 7.
PSM
menu
REC
STOP
6.
87
(Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
F / G (Volume Down/Up)
adjusts the volume.
VOL
REW
D / E
i
INPUT
PSM (Picture Status
recalls your preferred
Memory)
picture setting.
10. TELETEXT BUTTONS (option)
These buttons are used for teletext.
For further details, see the 'Teletext' section.
11. MUTE
switches the sound
on or
12. TV/AV
selects TV or AV mode.
switches the set on from
(With PIP)
13. MENU
selects
off.
standby.
a menu.
14. OK
accepts your selection
4
or
displays
the current mode.
Location and function of controls
15. LIST
the programme table.
displays
16. EYE/* (option)
switches the eye function
on or
off.
17. SLEEP
sets the
sleep
timer.
18. Q.VIEW
POWER
returns to the
selects
a
viewed programme.
favourite programme.
previously
19. PIP BUTTONS
PIP
MUTE
11
1
(option)
switches the sub picture on or off.
PR +/selects a programme for the sub picture.
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
SCAN
switches on or off the programme scan mode through 12 sub
1
2
3
4
5
6
7
8
9
0
TV/AV
2
ARC
12
3
SOUND
PICTURE
MENU
13
4
TURBO
OK
14
PR
5
VOL
VOL
PR
6
REW
PLAY
FF
P/STILL
STOP
REC
pictures.
20. STILL
freezes motion of the
COLOURED BUTTONS
TELETEXT
Battery
models)
or
87
picture.
These buttons
programme edit.
:
are
used for teletext
(only
I/II
SSM
LIST
15
PSM
SLEEP
EYE/
16
9
TEXT
17
Q.VIEW
18
10
installation
The remote control handset is powered by two AA type batteries. To
load the batteries, turn the remote control handset over and open
the battery compartment. Install two batteries as indicated by the
polarity symbols ( + and ) marked inside the compartment.
MIX
TIME
REVEAL
? MODE
SIZE
STILL
UPDATE
INDEX
i
20
-
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
M
(Without PIP)
5
Location and function of controls
Front
panel
RT-28/32FZ30/32/33 series
RT-29FB91 series
7
ON/OFF
MENU
8
S-VIDEOL/MN
2 3
1
5
46
125
OK
3
VOL
PR
6
4
AUDIO
R
AV3
RT-29FA34 series
RT-32FZ60 series
AV3
7
MENU
OK
VOL
PR
ON/OFF
8
S-VIDEOL/MN
4
1235
7
8
2345
1
6
AUDIO
R
RT-28/32FZ80 series
RT-29FA51 series
7
MENU
OK
VOL
MENU
PR
VOL
PR
OK
ON/OFF
S-VIDEOL/MN
8
1
25
1
34
3
42 5
6
AUDIO
R
AV3
1.
MAIN POWER
6.
(ON/OFF)
switches the set
on or
off.
EYE
(option)
adjusts picture according
to the
surrounding
conditions.
2.
POWER/STANDBY INDICATOR
illuminates
brightly
when the set is in
standby
7.
mode.
Connect the
dims when the set is switched
MENU
selects
(option)
headphone plug to this
AUDIO/VIDEO IN SOCKETS
(AV3)
Connect the audio/video out sockets of external
a menu.
equipment
to these sockets.
S-VIDEO/AUDIO IN SOCKETS
4.
OK
or
displays
the current
mode.
(Volume Down/Up)
adjusts the volume.
adjusts menu settings.
D / E (Programme Up/Down)
programme or a menu item.
switches the set on from standby.
6
nal
equipment
an
exter-
to the S-VIDEO socket.
Connect the audio out sockets of the external
F / G
5.
(S-VIDEO)
Connect the S-VIDEO out socket of
accepts your selection
selects
socket.
on.
8.
3.
HEADPHONE SOCKET
a
REMOTE CONTROL SENSOR
equipment
to the audio sockets
as
in AV3.
Basic
operation
On and off
1.
2.
3.
4.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, D / E, TV/AV or
NUMBER buttons on the remote control handset to switch it on fully.
Press the POWER button on the remote control handset.
The set reverts to standby mode.
Press the main power button again to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme
selection
You can select
buttons.
a
Volume
POWER
programme number with the D / E
or
NUMBER
adjustment
Press the F / G button to
adjust
MUTE
the volume.
1
2
3
4
5
6
7
8
9
0
TV/AV
Quick view
Press the Q.VIEW button to view the last programme you
were
MENU
SOUND
watching.
This function works only when Favourite programme is
set to Off. Otherwise each press of this button will select a stored
favourite programme.
Note
:
TURBO
OK
PR
VOL
Mute function
VOL
PR
Press the MUTE button. The sound is switched off and the
display
W appears.
You
can
cancel it
by pressing
the MUTE, F / G, SSM, I/II, TURBO
SOUND button.
I/II
SSM
Auto Demonstration
To review all the menus programmed in the set, press the OK button of the panel control for about 10 seconds. To stop auto demonstration, press any button of the set or POWER button of the remote
control.
On
screen
language
selection
The menu can be displayed
First select your language.
1.
2.
3.
on
the
Q.VIEW
(option)
screen
in your desired
language.
Press the MENU button and then D / E button to select the
Special
menu.
Press the G button and then D / E button to select Language.
Press the G button and then D / E button to select your desired
language.
4.
All the on screen displays will appear in the selected language.
Press the OK or F button to select the Special menu.
Repeatedly press the MENU button to return to normal TV
viewing.
7
On
The
screen menus
between you and your set takes place on screen with
an operator menu. The buttons required for the operating steps are
also displayed.
dialogue
Menu selection
1.
Press the MENU button and then D / E button to
display
each
menu.
2.
3.
Press the G button and then D / E button to select a menu item.
Press the G button to display the sub menu or the pull-down
menu.
4.
Change
the
setting
of
an
item in the sub
or
F/GorD/E.
pull-down
menu
with
You can move to the higher level menu by pressing the OK or
F button and to move to the lower level menu by pressing the
G button.
Note :
In the teletext mode, menus are not displayed.
a.
In some models, the Normal/Turbo search will not display,
b.
only the Start will display in the Auto programme menu.
c.
On some models, the Language will not display.
Station
MENU
OK
Auto programme
VOL
OBG
{
OOI
{
NormalOsearch
{
ODK
{
TurboOsearch
{
OOM
{
ProgrammeOedit
FavouriteOprogramme
()O}{O OKOMENU
()O}{O OKOMENU
Station
PR
{
{
System
StorageOfrom
AutoOprogramme
ManualOprogramme
menu
Manual programme
Picture
VOL
PR
PSM
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
Storage
System
{
Channel
{
Fine
{
Search
{
Name
{
Booster
{
{
()O}{O OKOMENU
()O}{OOKOMENU
Picture
menu
Programme
Sound
SSM
{
AVL
{
DBS
{
Balance
{
§Volume
{
edit
OO0OOCO03
OO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
DeleteOOOOCopy
MoveOOOOOOSkip
()}{O OKOMENU
()O}{O OKOMENU
Sound
menu
Time
Clock
{
OffOtime
OnOtime
{
AutoOsleep
{
{
()O}{OOKOMENU
T ime
menu
Special
Language
Input
{
ChildOlock
{
BlueOback
{
Tilt
{
Degauss
{
{
()O}{OOKOMENU
Special
TV programme
8
menu
2
TV
stations
up
Setting
TV stations can be stored by programme numbers (0 to
you have preset the stations, you will be able to use the
D / E or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Up to 100
99). Once
Note
:
In
models up to 200 TV stations
some
Auto programme
can
be stored.
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
tuning
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
()O}{OOKOMENU
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select Auto pro-
1.
2.
gramme.
Press the G button to
3.
display
the Auto programme
menu.
Auto programme
System
StorageOfrom
{
OBG
{
NormalOsearch
OOI
{
TurboOsearch
{
1
2
3
4
5
6
7
8
9
ODK
OOM
()O}{OOKOMENU
0
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the F button.
Press the D / E button to select Storage from.
Press the G button. Select the beginning programme number
with the F / G button or NUMBER buttons on the Storage
from pull-down menu. Any number under 10 is entered with a
numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5.
Press the OK button.
Press the D / E button to select Normal or Turbo search.
4.
5.
6.
7.
8.
9.
Option:
In
some
models, you
can
only
MENU
OK
PR
VOL
VOL
PR
select Start.
Note :
a.
Turbo search is faster than Normal search and in some models, these searches will automatically store all receivable stations.
If the programmed station has poor quality sound, select the
b.
system again in the Manual programme menu.
10. Press the G button to begin auto programming.
All receivable stations are stored.
Auto programme
Auto programme
System
StorageOfrom
{
NormalOsearch
{
TurboOsearch
{
{
OOCO01O(BG)
7
MENU
System
StorageOfrom
{
NormalOsearch
{
TurboOsearch
{
36%
{
OOCO01O(BG)
7
36%
MENU
(Normal search)
(Turbo search)
In Australia, if no station name can be assigned to a
folstation, the channel number is assigned and stored as
lowed by a number see 'Assigning a station name' section to
assign the station name.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
Option:
-----
11.
Repeatedly
press the MENU button to return to normal TV
viewing.
9
Setting
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
Manual programme
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
()O}{OOKOMENU
TV
stations
up
2.
3.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select Manual
programme.
Press the G button to display the Manual programme
menu.
Manual programme
1
4
7
2
5
8
3
6
4.
5.
MENU
OK
PR
VOL
VOL
{
Channel
{
Fine
{
Search
{
Name
{
Booster
{
2
{
()O}{OOKOMENU
9
0
Storage
System
6.
7.
8.
PR
9.
10.
11.
12.
13.
14.
15.
Press the D / E button to select Storage.
Press the G button to select the programme number. Select the
desired programme number (0 to 99) with the F / G button or
NUMBER buttons on the Storage pull-down menu. Any number under 10 is entered with a numeric '0' (or '00') in front of it,
i.e. '05' (or '005') for 5.
Press the F button.
Press the D / E button to select System.
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or F button.
Press the D / E button to select Channel.
Press the G button. Press the D / E button to select V/UHF
or Cable on the Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
Press the OK or F button.
Press the D / E button to select Search.
Press the G button. Press the F / G button to commence
searching on the Search pull-down menu. If a station is found
the search will stop.
Press the OK button to store it. The display Stored will appear.
Manual programme
Storage
System
{
Channel
{
Fine
{
Search
{
Name
{
Booster
{
{
{{{
Stored
16. To store another station, repeat steps 4 to 15.
17. Repeatedly press the MENU button to return to normal TV
viewing.
10
Setting
TV
stations
up
Assigning station name
1. Repeat the 'Manual programme tuning' steps 1 to 3.
2. Press the D / E button to select Name.
3. Press the G button on the Name pull-down menu.
4. Press the D button. You can use a blank, +, -, the numeric 0 to
9 and the alphabet A to Z.
With the E button you can select in the opposite direction.
5. Select the position by pressing the F / G button and then make
your choice of the second character, and so on.
6. Press the OK button.
7. Repeatedly press the MENU button to return to normal TV
a
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
()O}{OOKOMENU
viewing.
Booster (option)
In some models, Booster is an optional function.
Booster can perform this function.
If the
Only
a
set with
is poor at the fringe area of TV signal, select
Booster to On. When the picture condition is good, do not select
Booster to On.
1.
2.
3.
4.
5.
6.
reception
the 'Manual programme tuning' steps 1 to 3.
Press the D / E button to select Booster.
Press the G button.
Press the D / E button to select On or Off on the Booster pulldown menu.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
1
2
3
4
5
6
7
8
9
0
MENU
Repeat
OK
PR
VOL
VOL
PR
viewing.
Fine
tuning
Normally
1.
2.
3.
fine
tuning
is
only necessary
if
reception
is poor.
the 'Manual programme tuning' steps 1 to 3.
Press the D / E button to select Fine.
Press the G button.
Repeat
Manual programme
Storage
System
{
Channel
{
Fine
{
Search
{
Name
{
Booster
{
{
{{{
}{OOKOMENU
4.
5.
6.
Press the F / G button to fine tune for the best picture and
sound on the Fine pull-down menu.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
The finely tuned programme will be
ber during programme selection.
indicated
by
a
yellow
num-
11
Setting
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
TV
stations
up
Programme
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
()O}{OOKOMENU
2.
3.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E
button to select
Programme edit.
Press the G button to display the Programme edit menu.
Programme edit
OOOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
1
2
3
4
5
6
7
8
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
DeleteOOOOCopy
MoveOOOOOOSkip
()}{O OKOMENU
9
0
Deleting
a
Copying
a
1.
2.
MENU
1.
2.
PR
VOL
VOL
programme
Select a programme to be deleted with the D / E or F / G button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
programme
Select a programme to be copied with the D / E
Press the GREEN button.
All the following programmes are shifted down
or F
one
/ G button.
position.
PR
Moving
1.
2.
3.
a
programme
Select a programme to be moved with the D / E or F / G button.
Press the YELLOW button.
Move the programme to the desired programme number with
theD/EorF/Gbutton.
4.
Press the YELLOW button
again
to release this function.
Programme edit
OOOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
MoveOOff
()}{OMENU
Skipping
1.
2.
3.
a
programme number
programme number to be
Select a
skipped with the D / E or F / G
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that
you will be unable to select it using the D / E button during normal TV viewing. If you want to select the skipped programme,
directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu.
Repeatedly press
12
the MENU button to return to normal TV
viewing.
Setting
TV
stations
up
Favourite programme
Station
This function lets you select your favourite programmes
1.
2.
directly.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select Favourite
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
programme.
3.
Press the G button to
display
the Favourite programme
menu.
()O}{OOKOMENU
Favourite programme
AutoOprogramme
ManualOprogramme
{
Off
{
56O CO 05
ProgrammeOedit
FavouriteOprogramme
{
{
}{O()OOKOMENU
4.
5.
6.
7.
8.
9.
Press the F / G button to select On or Off.
Press the D / E button to select
-----.
Select a desired programme with the F / G button or NUMBER
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
To store another programme, repeat steps 5 to 6.
You can store up to 8 programmes.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
--
1
2
3
4
5
6
7
8
9
0
MENU
viewing.
Repeatedly
OK
press the Q.VIEW button to select stored favourite pro-
grammes.
PR
VOL
Calling
the programme table
You can check the programmes stored in the memory
the programme table.
VOL
PR
by displaying
programme table
Press the LIST button to display the Programme table menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
Displaying
LIST
Station
OOOO OCO 01 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
Q.VIEW
O4OOSO67OOO9OOCO11
()}{O OKOMENU
Note :
a.
You may find some blue programmes. They have been set up
to be skipped by auto programming or in the programme edit
mode.
b.
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
programme in the programme table
Select a programme with the D / E or F / G button.
Then press the OK button.
The set switches to the chosen programme number.
Selecting
a
programme table
There are 10 programme table pages which contain 100 programmes.
Pressing the D / E or F / G button repeatedly turns the pages.
Paging through
Repeatedly
a
press the MENU button to return to normal TV
viewing.
13
Picture
Picture
PSM
PSM
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
1.
2.
3.
()O}{OOKOMENU
adjustment
(Picture Status Memory)
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select PSM.
Press the G button and then D / E button to select a picture
setting on the PSM pull-down menu.
Picture
1
4
7
2
5
8
4.
Press the OK
5.
Repeatedly
viewing.
9
0
You
MENU
{
Dynamic
Contrast
{
Standard
Brightness
{
Mild
Colour
{
Game
Sharpness
{
User
()O}OOKOMENU
3
6
PSM
or F
button.
press the MENU button to return to normal TV
also recall a desired picture (Dynamic, Standard,
Mild, Game or User) with PSM button on the remote control. The
picture Dynamic, Standard, Mild and Game are programmed
can
for
OK
optimum picture reproduction
changed.
at the
factory
and cannot be
PR
VOL
VOL
Picture
PR
You
2.
adjust picture contrast, brightness, colour intensity, sharpand tint (NTSC input only) to the levels you prefer.
can
ness
1.
adjustment
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select Contrast,
Brightness, Colour or Sharpness.
Picture
PSM
PSM
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
100
()O}{OOKOMENU
3.
4.
Press the G button and then F / G button to make
adjustments on the each sub menu.
Press the OK button to store it for the picture user.
Contrast
appropriate
80
}{O()OOKOMENU
5.
14
Repeatedly press
viewing.
the MENU button to return to normal TV
Picture
adjustment
Picture format
You
In
can
watch TV in various
picture formats;
4:3 and Zoom.
models, you can watch TV in various picture formats; 16:9
(Wide), 14:9, Zoom, Auto and 4:3.
some
Repeatedly press
the ARC button to select your desired
picture format.
4:3
This
picture
format is 4 to 3 of
general
TV.
16:9
You
enjoy the cinema (the picture
programme through the 16:9 mode.
can
14:9 (option)
You can enjoy the
move
4:3 is
the
magnified
screen
or
up
screen
16:9)
or
general
TV
TV programme
14:9 is viewed just like that the
format of 14:9
the 14:9 mode. The
through
screen
picture
format of
or
general
to the upper / lower and left /
right.
You
can
ARC
down with D / E button.
Zoom
You
can
The
screen
so
enjoy
the cinema in
4:3 is
that the
screen
magnified
a
through the Zoom mode.
the upper/lower and left/right sides
The bottom and top of the picture
vast screen
to
16:9 is full.
may be lost. In some models, You
with D / E button.)
Auto (option)
When your TV receives the wide
cally changed
countries)
Note
a.
In
picture
screen
the
signal,
format to be sent.
screen
up
or
down
PR
it will be automati-
(Not
available in all
:
some
16:9
b.
to the
can move
PR
or
models, when you switch the set to standby
off, the
Zoom
In the 1/2
the
picture format is reset to the 4:3.
size sub picture and Programme scan of
or
picture format
PIP mode
is not available.
15
Picture
adjustment
Eye (option)
is
Eye
an
optional
function.
Only
a
set with eye
option
can
perform
this function.
In
some
ing
models, the set will automatically adjust the picture accord-
surrounding conditions. This will enable you
suitable picture according to the surroundings.
to the
most
Press the EYE/* button to switch the eye function
to
on or
enjoy
the
off.
Off
When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.
At this time the
but the
PICTURE
tion
in green does not appear continuously
in yellow appears each time the picture condi-
display
display
changes.
TURBO
If you press the PSM or TURBO PICTURE button with the
eye function, the eye function is automatically switched off.
Note
:
Turbo
picture
selection
When this function is on, the
tinct than normal.
Repeatedly press
PSM
(option)
picture
will be
more
brilliant and dis-
the TURBO PICTURE button to switch
on or
off.
EYE/
(Turbo Picture off)
(Turbo Picture on)
If you press the PSM button with the Turbo picture function,
the Turbo picture function is automatically switched off.
Note
16
:
Sound
SSM
You
(Sound Status Memory)
2.
3.
Sound
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of the equalizer.
can
Speech
1.
adjustment
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select SSM.
Press the G button and then D / E button to select a sound setting on the SSM pull-down menu.
SSM
{
AVL
{
DBS
{
Balance
{
§Volume
{
()O}{OOKOMENU
Sound
SSM
{
F lat
AVL
{
DBS
{
Music
Movie
Balance
{
Speech
{
User
§Volume
{
()O}OOKOMENU
Sound Frequency Adjustment
a. Press the G button in User to
1
2
3
4
5
6
7
8
9
0
display
the User sub
menu.
MENU
OK
PR
0.1O0.5O1.5O5.0O10OkHz
VOL
()O}{OOKOMENU
VOL
PR
b. Select a sound band by pressing the F / G button.
c. Select appropriate sound level with the D / E button.
d. Press the OK button to store it for the sound User.
Repeatedly press
the MENU button to return to normal TV
viewing.
SSM
You
recall a desired sound (Flat, Music, Movie,
Speech or User) with SSM button on the remote control. The
sound Flat, Music, Movie and Speech are programmed for optimum sound reproduction at the factory and cannot be changed.
can
also
If you press the SSM button after making appropriate adjustment on the User sub menu, the display User automatically
appears even though you have already set a factory preset setting;
Flat, Music, Movie or Speech.
Note
:
17
Sound
Sound
Sound
SSM
{
AVL
{
DBS
{
Balance
{
§Volume
{
adjustment
adjustment
AVL (Auto Volume Leveler), DBS or headphone volume/sound. AVL automatically keeps on an equal volume
level even if you change programmes. If you switch DBS to on, the
set creates a dynamic bass sound. The Turbo sound creates an all
around sound as in a concert hall.
You
can
adjust balance,
()O}{OOKOMENU
1.
2.
3.
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select the desired
sound item; AVL, DBS, Balance, §Volume.
Make desired adjustment with the F / G, D / E or OK button
on each pull-down menu.
Sound
1
4
2
5
3
6
SSM
{
AVL
{
DBS
{
Balance
{
§Volume
7
8
}{OOKOMENU
MENU
TURBO
4.
Repeatedly press
viewing.
the MENU button to return to normal TV
OK
Turbo sound selection
PR
VOL
VOL
PR
{
9
0
SOUND
O0
(option)
When this function is on, the sound will be
amplified than normal.
Repeatedly press
more
emphasized
the TURBO SOUND button to switch
on or
and
off.
I/II
(Turbo Sound off)
(Turbo Sound on)
Sound output selection
In AV
mode, you
can
select output sound for the left and
right
loud-
speakers.
Repeatedly press the I/II button to select the sound output.
L+R :
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loudspeaker.
L+L :
Audio signal from audio L input is sent to left and right loudspeakers.
R+R :
Audio signal from audio R input is sent to left and right loudspeakers.
18
Sound
Stereo/Dual
adjustment
reception
When a programme is selected, the sound information for the station appears after the programme number and station name disap-
pear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button twice again.
selection for dual language broadcast
If a programme is received in two languages (dual language), you
can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II
button repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
Language
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Commanding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
If your set is
1.
2.
3.
equipped
I/II
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
19
Time
Time
Clock
{
OffOtime
OnOtime
{
AutoOsleep
{
Setting
1.
{
2.
3.
setting
the clock
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Clock.
Press the G button and then D / E button to adjust the hour.
T ime
()O}{OOKOMENU
Clock
{
OffOtime
OnOtime
{
AutoOsleep
{
-i-o:o-i-
{
()O}{OOKOMENU
1
2
3
4
5
6
7
8
9
4.
5.
6.
Press the G button and then D / E button to adjust the minute.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
Setting
the On/Off timer
this function, the set automatically switches on or off at a
preset time. You must set the time correctly before using on/off time
function.
By using
0
MENU
1.
OK
3.
PR
VOL
2.
Press the MENU button and then D / E button to select the
Time menu.
Press the G
button and then D / E button to select Off
time/On time.
Press the G button and then D / E button to adjust the hour.
VOL
Time
PR
Clock
{
OffOtime
Onotime
{
{
00o:00
AutoOsleep
{
Pr
Vol
1
30
Off
()O}{OOKOMENU
4.
5.
6.
7.
Press the G button and then D / E button to adjust the minute.
Only On time function; Press the G button and then D / E
button to adjust programme number and volume level.
Press the OK button.
Repeatedly press the MENU button to return to normal TV viewing.
Note :
a.
On time works only in standby mode.
b.
To view the remaining on/off time, select the Time menu.
c.
When you switch the main power off, the Clock is reset.
Auto
sleep
If you select On on the Auto sleep pull-down menu, the set will
automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting.
1.
2.
3.
4.
20
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Auto sleep.
Press the G button and then D / E button to select On or Off on
the Auto sleep pull-down menu.
Repeatedly press the MENU button to return to normal TV viewing.
Other functions
Special
TV and AV modes
be set for TV or AV mode. AV mode is used when a video
cassette recorder (VCR), or other equipment is connected to the set.
Inputs
can
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
2.
3.
Press the MENU button and then D / E
Special
Language
Input
{
ChildOlock
{
BlueOback
{
Tilt
{
Degauss
{
{
button to select the
()O}{OOKOMENU
menu.
Press the G button and then D / E button to select Input.
Press the G button and then D / E button to select TV, AV1,
AV2 AV3 or COMPONENT on the Input pull-down menu.
,
Special
Language
Input
{
{
TV
ChildOlock
{
AV1
BlueOback
{
AV2
Tilt
{
AV3
Degauss
{
COMPONENT
1
2
3
4
5
6
7
8
9
0
TV/AV
()O}OOKOMENU
AV1 : VCR connected to the Euro scart socket or AV1 sockets on
the set.
AV2 : VCR connected to the AV2 sockets on the set.
AV3 : VCR connected to the AV3 sockets on the set.
COMPONENT : DVD Player connected to the COMPONENT
sockets on the set
4.
Repeatedly press
viewing.
Alternatively you can
the MENU button to return to normal TV
select the TV
or
AV mode
TV/AV button.
In AV
tons.
mode, to return to TV mode, press the
Auto AV
MENU
by pressing
OK
the
D / E or NUMBER but-
PR
VOL
VOL
PR
switching (option)
If your VCR outputs an AV switching voltage when connected to the
Euro scart socket, the set will switch to AV1 mode automatically.
But if you want to keep on watching TV mode, press the D / E or
NUMBER buttons.
Press the TV/AV button to return to AV modes.
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
2.
3.
4.
Press the MENU button and then D / E
Special
button to select the
menu.
Press the G button and then D / E button to select Child lock.
Press the G button and then D / E button to select On or Off on
the Child lock pull-down menu.
Repeatedly press the MENU button to return to normal TV
viewing.
With the lock on, the display Child lock on appears on the screen
if any button on the front panel is pressed while viewing the TV.
Note : The display Child lock on will not appear on the screen if
any button on the front panel is pressed while displaying the menus.
21
Other functions
Blue back
Special
Language
Input
{
ChildOlock
{
BlueOback
{
Tilt
{
Degauss
{
{
If you select On
ground appears
on
on
the Blue back pull-down menu, the blue backthe screen when there is no or poor signal.
Press the MENU button and then D / E
1.
Special
button to select the
menu.
Press the G button and then D / E button to select Blue back.
Press the G button and then D / E button to select On or Off
on the Blue back pull-down menu.
Repeatedly press the MENU button to return to normal TV viewing.
2.
3.
()O}{OOKOMENU
(option)
4.
1
2
3
Note :
a. The blue background automatically appears on the screen when
there is no signal in AV mode.
b. In the Twin picture mode, PIP, Component mode, the blue background doesn't appear on the screen.
4
5
6
Tilt
7
8
9
The TV
another
0
1.
MENU
picture may tilt to the
position. This function
OK
4.
can
or
right
if the TV set
be used to
Press the MENU button and then D / E
Special
2.
3.
left
moves
to
compensate the tilt.
button to select the
menu.
Press the G button and then D / E button to select Tilt.
Press the G button and then F / G button to adjust the tilt on
the Tilt pull-down menu.
Repeatedly press the MENU button to return to normal TV viewing.
PR
VOL
VOL
PR
Degaussing (option)
Owing to the super large used in the set. The colour purity of the
picture may be affected by other magnetic influences such as
speakers. Stripes may appear on the screen or there may be colour
patches. You can restore high colour quality by operating the
Degaussing function.
1.
2.
3.
4.
Press the MENU button and then D / E
Special
button to select the
menu.
Press the G button and then D / E button to select Degauss.
Press the G button and then D / E button to select On on the
Degauss pull-down menu. After the degauss function works,
On mode switches to Off mode.
Repeatedly press the MENU button to return to normal TV viewing.
Note : If you cannot adjust the
it again after about 4 minutes.
Sleep
screen
condition
by degaussing, try
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time elapses.
Press the SLEEP button to select the number of minutes. The diswill appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180 and 240. The timer begins to count down from the number
of minutes selected.
-
-
-
Note :
a.
To view the remaining sleep time, press the SLEEP button once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
until the display
appears.
c.
When you switch the set off, the set releases the preset sleep time.
-
22
-
-
PIP
Option
PIP is
operation (option)
:
an
optional function,
so
that
only the
set with PIP function can
operate.
PIP (Picture in Picture) displays a picture within a
PIP function is not available in Component mode.
picture.
On and off
Press the PIP button to switch on the sub
press this button again to switch it off.
Input
mode selection for sub
Press the INPUT button to select the
picture
input
Each time this button is pressed, each
ture is displayed as shown below.
Programme
Swapping
number
picture.
mode for the sub
picture.
input
mode for the sub
AV1
AV2
Component (option)
AV3
between main and sub
pictures
pic-
Press the SWAP button to exchange the main and sub pictures.
Note : When the main picture is TV or AV modes, the swapping is
available.
Programme
selection for sub
picture
Press the PR +/- buttons to select a programme for the sub picture.
(In some models, the sub picture programme selection is available
when the sub picture is TV mode.)
Sub
picture
size
press the SIZE button to select the desired sub
size. The sub picture appears as below.
Repeatedly
1/16 size of the main
Note
ture
:
When the sub
picture
picture
1/9 size
size is 1/2 of the main
picture
1/2 size
picture,
the
pic-
PIP
quality might get poor.
Sub
picture
freeze
Press the STILL button to freeze motion of the sub
Press this button again to restore motion.
Sub
picture.
SIZE
picture position change
Press the POSITION button repeatedly until desired
achieved. The sub picture moves clockwise.
Programme
PR
position
STILL
PR
POSITION
SWAP
SCAN
INPUT
is
scan
This function enables you to search all the stored stations in 12 sub
pictures mode only and see your desired station by exchanging the
main and sub pictures.
Press the SCAN button to select 12 sub pictures.
Only the selected 12 sub pictures search all the stored stations.
Press the SCAN button again to switch off these sub pictures.
23
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
a
set
free service broadcast by most TV stations which gives
up-to-the-minute information on news, weather, television programmes, share prices and many other topics.
Teletext is
a
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
Switch on/off
1
2
3
4
5
6
7
8
9
0
TV/AV
Press the TEXT button to switch to teletext. The initial page or last
page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT button to switch off teletext. The previous mode
reappears.
SIMPLE text
OK
selection
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The D / E button can be used to select the preceding or following page.
Page
PR
1.
PR
2.
colour button in LIST mode
If the TV is in SIMPLE text, TOP text or FASTEXT mode, press the
button to switch to LIST mode.
M
Programming
a
Four teletext page numbers of your choice can be colour coded and
easily selected by pressing the corresponding coloured button on
TEXT
the remote control handset.
MODE
M
1.
Press
a
2.
Using
the NUMBER buttons, select the page you wish to pro-
3.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number by blinking once. From now on, you can
4.
select this page with the same coloured button.
The three other coloured buttons are programmed in the
way.
24
coloured button.
same
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the D button can be used.
4. The red button permits to return to previous selection.
Alternatively the E button can be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
1
2
3
4
5
6
7
8
9
0
FASTEXT
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
selection
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The D / E button can be used to select the preceding or following page.
Page
1.
2.
3.
4.
PR
PR
i
25
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
solutions of riddles or puzzles.
Press this button again to remove the information from the
display.
SIZE
Selects double
Press
1
2
3
4
5
6
7
8
9
Press
height text.
this button to enlarge the top
this button again to enlarge
page.
Press this button
to return to the normal
display.
UPDATE
Displays
0
again
half of the page.
the bottom half of the
teletext
the TV
picture on
page. The display
of the
corner
screen.
the
screen
while
waiting
for the
new
will appear at the top left hand
When the updated page is available then
will change to the page number.
Press this button to view the updated teletext page.
display
PR
HOLD
PR
the automatic page
text page consists of 2 or
Stops
change
which will
if
occur
a
tele-
sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
stop symbol is displayed
more
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
screen
MIX
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
To switch the TV
MIX
TIME
REVEAL
picture
off press this button
again.
?
TIME
TV programme, press this button to display
the time at the top right hand corner of the screen. Press this
When
viewing
button
again
a
to remove the
display.
In the teletext
mode,
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the RED / GREEN, D / E
NUMBER buttons.
change
Press this button
26
again
to exit this function.
or
Connection of external
You
can
connect additional
equipment,
such
as
equipment
VCRs, camcorders
etc. to your set.
Here shown may be somewhat different from your set.
Aerial socket
1.
2.
3.
4.
5.
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
Euro scart socket
1.
2.
L L 75‰
PB
Y
ANT IN
PR
COMPONENT
IN
(480)
MONITOR
OUT
RF
OUT
AV2
IN
VIDEO
(L/MONO) AUDIO (R)
AV1
IN
VCR
(option)
Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
Press the PLAY button on the VCR.
If your VCR outputs a switching voltage connect to Euro scart
socket, the set will switch to AV1 mode automatically. But if you
want to keep on watching TV mode, press the D / E or NUMBER buttons.
Otherwise press the TV/AV button on the remote control handset to select AV1. The VCR playback picture appears on the
L L 75‰
PB
Y
ANT IN
PR
COMPONENT
(480i)
MONITOR
OUT
AV2
IN
(L/MONO)
VIDEO
AUDIO
(R)
VCR
screen.
You
can
also record programmes received
Audio/Video in sockets
by the TV on
video tape.
(option)
L L 75‰
PB
Y
ANT IN
PR
COMPONENT
(480i)
1.
2.
3.
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set.
If the VCR is connected to the AV sockets on the set, press the
TV/AV button to select AV1, AV2 or AV3.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
You
also record programmes received
tape via audio/video out sockets.
can
by
the TV
on
MONITOR
OUT
RF
OUT
AV2
IN
VIDEO
(L/MONO)
AUDIO (R)
AV1
IN
VCR
video
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
S-VIDEOL/MN
AUDIO
R
AV3
VCR
27
Connection of external
equipment
S-Video/Audio in sockets
S-VIDEOL/MN
When
connecting
the S-Video socket of the VCR to the S-VIDEO
socket of the set, the
AUDIO
1.
R
AV3
(S-AV) (option)
picture quality
will be further
improved.
Connect the S-Video socket of the VCR to the S-VIDEO socket of the set.
2.
Connect the audio cable from the VCR to the AUDIO sockets
3.
panel of the
Select AV3 by pressing
4.
Press the PLAY button
on
VCR
the side
The VCR
Note
:
L L 75‰
PB
1.
(480i)
MONITOR
OUT
RF
OUT
AV2
IN
(L/MONO)
AUDIO
AV1
IN
(R)
2.
DVD
repeatedly.
the VCR.
on
the
screen.
simultaneously, only
in sockets
the S-VIDEO
can
be received.
(option)
PR
COMPONENT
VIDEO
on
playback picture appears
Component
Y
the TV/AV button
If both S-VIDEO and VIDEO sockets have been connected
to the VCR
ANT IN
set.
3.
4.
Player
Connect the COMPONENT video output sockets (Y Cb Cr, Y Pb
Pr or Y B-Y R-Y) of the DVD player to the COMPONENT INPUT
sockets (Y PB PR) on the set.
Connect the audio cable from the DVD player to AUDIO IN
sockets of AV2.
Press the TV/AV button to select COMPONENT.
Press the PLAY button on the DVD player.
The COMPONENT playback picture appears on the screen.
Monitor out sockets
Y
ANT IN
L L 75‰
PB
Connect the audio/video in sockets of the other TV
VCR to MONITOR OUT sockets of the set.
PR
or
monitor
or
or
monitor
or
COMPONENT
(480i)
MONITOR
OUT
RF
OUT
AV2
IN
VIDEO
(L/MONO)
AUDIO
(R)
AV1
IN
RF out sockets
Second TV
28
Connect the audio/video in sockets of the other TV
VCR to RF OUT sockets of the set.
Connection of external
Headphone
socket
equipment
(option)
Insert the headphone plug to the headphone socket of the set.
You can listen to the sound through the headphone and the TV's
speakers. To adjust the headphone volume, press the F / G button
on the §Volume pull-down menu. See the 'Sound adjustment'
section.
Sound
SSM
{
AVL
{
DBS
{
Balance
{
§Volume
{
3303(3I)
S-VIDEOL/MN
AUDIO
R
AV3
}{OI/IIOOKOMENU
If you press the MUTE button, only the sound from the TV's speakers
are switched off.
When a programme is received in dual language, you can select
a language (DUAL I, DUAL II or DUAL I+II) for the sound from
the headphone regardless of that from the TV's speakers. On
the §Volume pull-down menu, press the I/II button to select
the desired language; I, II or I II.
At this time if the set is in AV mode, the I/II button selects output
sound;LR,LLorRR,inturn.
29
Note
Troubleshooting
check list
Symptoms
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
Check aerial
(broken lead?)
into
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
31
Download PDF